RECIRCULATING SOAK SINK CONVERSION
INSTALLATION/OPERATION &
TECHNICAL MANUAL
FOR JACKSON MODEL:
WHIRL WIZARD
August 20, 2007
P/N 7610-011-70-65 (Revision D)
Download from Www.Somanuals.com. All Manuals Search And Download.
STOP!
PARE!
ARRET!
CALL 1-888-800-5672 TO REGISTER THIS PRODUCT!
FAILURE TO DO SO WILL VOID THE WARRANTY!
LLAME AL 1-888-800-5672 PARA REGISTRAR ESTE PRODUCTO!
AL NO HACERLO LA GARANTIA SERA ANULADA!
S.V.P. APPELER 1-888-800-5672 POUR ENREGISTRER CE PRODUIT,
LA GARANTIE SERA ANNULEE POUR TOUT PRODUIT NON- ENREGISTREE
3
Download from Www.Somanuals.com. All Manuals Search And Download.
REVISION/ REVISION
MADE APPLICABLE
DETAILS
PAGE
DATE
BY
ECN
Updated weldment numbers for cover and box weldments.
Converted to centered layout.
D
08-20-2007
MAW
7933
i
Download from Www.Somanuals.com. All Manuals Search And Download.
NOMENCLATURE FOR THE MODELS COVERED IN THIS MANUAL
AJ-54CE
AJ = AJ Series of rack conveyors
54 = 54” wide machine from tub edge to tub edge
76 = 76” wide machine from tub edge to tub edge
90 = 90” wide machine from tub edge to tub edge
CE = Electrically-heated, hot water sanitizing dishmachine
CS = Steam-heated, hot water sanitizing dishmachine
Jackson MSC LLC. provides technical support for all
Model:
of the dishmachines detailed in this manual. We
strongly recommend that you refer to this manual
before making a call to our technical support staff.
Please have this manual with you when you call so
that our staff can refer you, if necessary, to the prop-
er page. Technical support is available from 8:00
a.m. to 5:00 p.m. (EST), Monday through Friday.
Technical support is not available on holidays.
Contact technical support toll free at 1-888-800-
5672. Please remember that technical support is
available for service personnel only.
Serial No.:
Installation Date:
Service Rep. Name:
Phone No.:
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
SECTION
DESCRIPTION
PAGE
I.
GENERAL
Specifications
Dimensions
2
3
II.
INSTRUCTIONS SECTION
Installation Instructions
Operating Instructions
5
7
III.
IV.
PREVENTATIVE MAINTENANCE
9
PARTS SECTION
Installation Assembly
Main Assembly
11
12
V.
ELECTRICAL DIAGRAM
115 Volt, 60 Hertz, Single Phase
230 Volt, 50-60 Hertz, Single Phase
14
15
VI.
JACKSON MAINTENANCE & REPAIR CENTERS
Alabama to Florida
17
18
19
20
21
22
Florida to Maryland
Maryland to New York
New York to Pennsylvania
Rhode Island to Wisconsin
Wisconsin to Wyoming/International
i
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 1:
SPECIFICATION INFORMATION
1
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 1: SPECIFICATION INFORMATION
WHIRL WIZARD
This unit can be adapted to most standard three compartment sink to provide recirculated water to assist in the removal of soil
from ware. The entire unit will fit within the frame work of standard sinks, so no additional floor space is required.
For the 115 Volt unit, a one (1) horsepower motor and pump continually recirculates warm detergent laden water through a
unique agitator mounted in the drain hole in the sink. For the 230 Volt unit, a three-quarter (3/4) horsepower motor and pump
continually recirculates warm detergent laden water through a unique agitator mounted in the drain hole in the sink. The water
exits through vanes located on the agitator causing a vortex in the water in the sink. This constant action, in conjunction with a
low sudsing detergent, loosens food soil. A built-in thermostatically controlled heating system maintains water temperature
between 110 and 120° Farenheit.
The unit includes the following:
1. For the 115 Volt unit, one (1) horsepower pump motor with built-in thermal overload protection.
For the 230 Volt unit, a three-quarter (3/4) horsepower motor with built-in thermal overload protection.
2. Pump fitted with internal cutting blades.
3. Built-in thermostatically controlled heating system.
4. Illuminated power ON/OFF switch.
5. Heavy duty grounded power cord.
6. 304 stainless steel construction.
ELECTRICAL REQUIREMENTS:
MODEL
WW-1
VOLTS
115
HZ
60
PHASE
1
TOTAL AMPS
16.1
WW-1
WW-1
230
230
50
60
1
1
10.2
10.2
Whirl Wizard Technical Manual 7610-011-70-65
Issued: 08-20-2007 Revised: N/A
2
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 1: SPECIFICATION INFORMATION
DIMENSIONS
Whirl Wizard Technical Manual 7610-011-70-65
Issued: 08-20-2007 Revised: N/A
3
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 2:
INSTALLATION & OPERATION
INSTRUCTIONS
4
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
VISUAL INSPECTION: Before installing the unit, check the container and machine for damage. A damaged container is an indi-
cator that the machine may have been hadled roughly during shipping. If there is damage to both the container and the
machine, do not throw away the container. The machine has been inspected at the factory and is expected to arrive to you in
new, undamaged condition. However, rough handling by carriers or others may have resulted in damage occuring to the
machine. If such a situation does occur, do not return the unit to Jackson. Instead contact both the dealer you purchased the
unit through and the carrier. Ask the carrier to send a representative out to inspect the damage and make a report of it. You
normally have 48 hours to contact a carrier to report damages, but this varies based on locale. The best advice is to contact
your carrier and dealer as soon as damage is discovered.
UNPACKING THE MACHINE: Once the machine has been removed from the container, ensure that there are no obvious miss-
ing parts. This may not be apparent at first glance. If you discover that a part is missing, contact Jackson MSC Inc. immedi-
ately.
LEVEL THE MACHINE:
1. Position the Whirl Wizard under the sink drainboard.
2. Adjust left to right and front to back.
3. Align inlet and outlet tubes with plumbing from main flow chamber (item 2).
4. To adjust the height, loosen the allen screws in each leg socket connector.
5. Slide leg out to desired height. The drain connection on the machine should be at the same level as the sink drain connec-
tion.
6. Tighten the allen head screws in each leg socket connector.
7. Fine adjustments in height can be made by turning the bullet foot in each leg.
INSTALLING THE MACHINE:
1. Locate the sink at the highest end of the drain slope.
2. Disconnect the existing drain plumbing from the sink.
3. Remove the crumb cup.
4. Clean off old plumber’s putty from the sink. Add fresh putty to the sink flange.
5. Position the main flow chamber (item 2) through the bottom of the sink. From the bottom, slip the rubber washer (item 3),
fiber washer (item 4), back-up flange (item 5) and mounting flange (item 6) on the main flow chamber.
6. Once in position, mount the jam spring (item 7) on to the main flow chamber. This will hold items 3 through 5 in place.
7. Tighten the screws in item 6 until the assembly is held in place. Care must be taken to position screws where they are acces-
sible and will not be covered by the hose barb when assembled into the main flow chamber.
8. In the bottom of the main flow chamber (item 2), install the 1-1/2” NPT close nipple (item 10).
9. The 1-1/2” NPT tee (item 9) is screwed onto the 1-1/2” nipple (item 10).
10. From the tee (item 9) to the drain, install the following items: 1-1/2” close nipple (item 10) and 1-1/2” ball valve (item 11).
Make sure the handle of the ball valve (item 11) is easily accessible by the operator.
11. On the sink side of the tee (item 9) install a 1-1/2” NPT hose barb (item 12).
12. On the inlet side of the main flow chamber (item 2) install a 1” NPT hose barb (item 8).
13. With different styles and types of sinks, the directional manifold (item 1) may require modification. The directional tubing
may need to be bent to conform to the bottom of the sink or reduced in length. Since it is fabricated from thin wall stainless
steel, a hacksaw can be used to cut the tubing.
HOSE CONNECTIONS:
1. Position the 1-1/2” ID intake line hose (item 13) with the Whirl Wizard as xlose to the sink as possible, mark and cut to the
length required.
2. Repeat with the 1” ID discharge line hose (item 14).
3. Connect the intake and discharge line hoses with hose clamps (item 15) to their respective connections.
NOTE: ENSURE THAT THE HOSE CLAMPS ARE TIGHT BEFORE OPERATING THE UNIT.
CAUTION: IF DIRECT FLOOR DRAIN IS UNDER OR NEAR MACHINE, MAKE CERTAIN THAT ADEQUATE PROTEC-
TION IS PROVIDED TO PREVENT WATER SPLATTER FROM DAMAGING THE UNIT.
Whirl Wizard Technical Manual 7610-011-70-65
Issued: 08-20-2007 Revised: N/A
5
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS (CONTINUED)
ELECTRICAL POWER CONNECTION:
1. The Whirl Wizard requires a dedicated 20 amp, 115 volt single phase circuit.
2. A 20 amp NEMA 5-20R receptacle is required for the NEMA 5-20P cord set
and plug shipped with the machine.
CAUTION: A NEMA 5-20R RECEPTACLE IS REQUIRED. IF NOT AVAIL-
ABLE A QUALIFIED ELECTRICIAN SHOULD INSTALL THE CORRECT
RECEPTACLE.
Whirl Wizard Technical Manual 7610-011-70-65
Issued: 08-20-2007 Revised: N/A
6
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS
OPERATION INSTRUCTIONS
OPERATION:
1. Install the directional manifold (item 1) into the main flow chamber (item 2).
2. Fill the sink with hot water.
3. Add the proper chemicals (non-foaming detergent) for soaking pots, pans and utensils.
4. Pre-scrap pots, pans and utensils of all large loose soil.
NOTE: THE WHIRL WIZARD POT SINK IS NOT A GARBAGE DISPOSAL! IT IS INTENDED TO SOFTEN SOIL WHICH IS
DIFFICULT TO REMOVE. BAKED-ON SOIL MAY STILL REQUIRE ADDITIONAL EFFORT TO REMOVE.
5. With the power switch in the ON position, place the soiled pots, pans and utensils into the sink.
NOTES: PLACEMENT OF POTS AND PANS SHOULD BE DONE IN A MANNER THAT NOTHING WILL OBSTRUCT THE
MAIN FLOW OF WATER.
6. Allow pots, pans and utensils to soak for 15 to 20 minutes to soften and loosen soil.
CLEANING INSTRUCTIONS:
1. Turn the power switch to the OFF position.
2. Turn the ball valve to the open position and drain the sink.
3. When the sink is empty, remove the directional manifold (rotate counter-clockwise) and clean.
4. Re-install the directional manifold into the main flow chamber.
CHANGING DIRECTION OF MACHINE INSTALLATION:
1. Remove the cover from the Whirl Wizard.
2. Remove the power switch from the side and insert into the pre-punched hole in the opposite end of the unit.
3. To extend the wiring, cut the tie wraps. There is sufficient length to allow the power switch to be relocated.
4. Re-install the cover.
Whirl Wizard Technical Manual 7610-011-70-65
Issued: 08-20-2007 Revised: N/A
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 3:
PREVENTATIVE MAINTENANCE
8
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 3: PREVENTATIVE MAINTENANCE
PREVENTATIVE MAINTENANCE
The dishmachines covered in this manual are designed to operate with a minimum of interaction with the operator. However,
this does not mean that some items will not wear out in time. Jackson highly recommends that any maintenance and repairs
not specifically discussed in this manual should be performed by QUALIFIED SERVICE PERSONNEL ONLY. Performing main-
tenance on your dishmachine may void your warranty if it is still in effect, so if you have a question or concern, do not hesitate
to contact Jackson.
There are many things that operators can do to prevent catastrophic damage to the dishmachine. One of the major causes of
component failure has to do with prescrapping procedures. A dishmachine is not a garbage disposal; any large pieces of mate-
rial that are put into the machine shall remain in the machine until they are either broken up (after spreading out on your ware!)
or physically removed. Strainers are installed to help catch debris, but they do no good If they are clogged. Have operators reg-
ularly inspect the pan strainers to ensure (1) that they are free of soil and debris and (2) they are laying flat in the tub.
When cleaning out strainers, do NOT beat them on waste cans. The strainers are made of metal and can be forgiving; but once
severe damage is done, it is next to impossible for the strainer to work in the way it was designed to. Wipe out strainers with
a rag and rinse under a faucet if necessary. For stubborn debris, a toothpick should be able to dislodge any obstructions from
the perforations. Always ensure that strainers are placed back in the machine before operation and that they lay flat in the tub.
You may wish to also refer to the page entitled “Detergent Control” in order to learn more about how your water hardness will
effect the performance of your machine. Hard water makes dishmachines work harder and decreases efficiency.
Again, it is important to remind operators that trying to perform corrective maintenance on the dishmachine could lead to larg-
er problems or even cause harm to the operator. If a problem is discovered; secure the dishmachine using proper shut down
procedures as listed in this manual and contact Jackson.
Some problems, however, may having nothing to do with the machine itself and no amount of preventative maintanence is
going to help. A common problem has to do with temperatures being too low. Verify that the water temperatures coming to your
dishmachine match the requirements listed on the machine data plate. There can be a variety of reasons why your water tem-
perature could be too low and you should discuss it with Jackson to determine what can be done.
By following the operating and cleaning instructions in this manual, you should get the most efficient results from your machine.
As a reminder, here are some steps to take to ensure that you are using the dishmachine the way it was designed to work:
1. Ensure that the water temperatures match those listed on the machine data plate.
2. Ensure that all strainers are in place before operating the machine.
3. Ensure that all wash and/or rinse arms are secure in the machine before operating.
4. Ensure that drains are closed/sealed before operating.
5. Remove as much soil from dishes by hand as possible before loading into racks.
6. Do not overfill racks.
7. Ensure that glasses are placed upside down in the rack.
8. Ensure that all chemicals being injected to machine have been verified as being at the correct concentrations.
9. Clean out the machine at the end of every workday as per the instructions in the manual.
10. Always contact Jackson whenever a serious problem arises.
11. Follow all safety procedures, whether listed in this manual or put forth by local, state or national codes/regulations.
Whirl Wizard Technical Manual 7610-011-70-65
Issued: 08-20-2007 Revised: N/A
9
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 4:
PARTS SECTION
10
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 4: PARTS SECTION
INSTALLATION ASSEMBLY
1
2
8
3
4
14
15
5
6
7
13
11
12
15
10
9
ITEM QTY
DESCRIPTION
Mfg. No.
1
1
1
1
1
1
1
1
1
1
2
1
Directional Manifold
Main Flow Chamber
05700-031-70-49
05700-031-83-05
05330-011-70-87
05330-011-70-48
05340-011-83-13
05340-011-83-14
05340-011-83-04
04730-011-70-36
04730-011-70-39
04730-011-70-86
05700-011-70-40
04820-111-71-46
05700-021-84-75
04730-011-70-38
05700-021-69-20
05700-021-69-19
04730-719-01-37
2
3
Rubber Washer, 3-1/2" Diameter
Fiber Washer, 3-1/2" Diameter
Flange, Back-Up
Mounting Flange
Spring, Jam
Hose Barb, 1" NPT to 1" Hose Brass
Tee, 1-1/2" FNPT, Brass
Nipple, Close, 1-1/2" NPT, Stainless Steel
Ball Valve Assembly
Ball Valve Only
Handle Only
4
5
6
7
8
9
10
11
12
13
14
15
1
1
1
4
Hose Barb, 1-1/2" NPT x 1-1/2" PVC
Hose, 1-1/2" ID x 2'-0" Long
Hose, 1" ID x 12" Long
Hose Clamp, 1 5/16" - 2 1/4"
Whirl Wizard Technical Manual 7610-011-70-65
Issued: 08-20-2007 Revised: N/A
11
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 4: PARTS SECTION
MAIN ASSEMBLY
1
19
2
3
18
17
15
4
12
10
5
11 13 14
8, 9
7
14
16
6
TEM QTY
DESCRIPTION
Cover Weldment
Mfg. No.
1
1
1
2
4
4
1
1
1
4
4
1
1
1
1
4
1
1
1
1
1
1
05700-003-38-43
05700-003-38-49
05305-011-39-36
05700-021-67-92
05340-108-01-03
06105-021-69-18
06105-002-33-78
05700-021-70-32
05310-374-01-00
05311-174-01-00
05700-031-68-31
05700-021-68-60
05700-011-70-33
05700-011-70-34
04730-719-01-37
04540-021-70-21
05945-109-05-69
05930-011-82-72
06145-011-70-28
09905-021-70-64
09905-021-70-59
2
Box Bottom Weldment
3
Screw, 10-32 x 1/2" Long, Truss Head
Leg Weldment
Bullet Foot
Pump and Motor Assembly, 1 HP
Pump and Motor Assembly, 3/4 HP
Chopper Assembly
Locknut, 1/4"-20 with Nylon Insert
Flat Washer, 1/4"
Inlet Plumbing
"J" Tube, Outlet
Suction Connector Tube
Discharge Connector Tube
Hose Clamp, 2"
Heater, Flexible, 120 Volts, 400 Watts
Contactor, Motor
Power Switch
Power Cord
Decal Whirl Wizard Logo, Left
Decal, Whirl Wizard Logo, Right (Not Shown)
4
5
6
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Whirl Wizard Technical Manual 7610-011-70-65
Issued: 08-20-2007 Revised: N/A
12
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 5:
ELECTRICAL DIAGRAMS
13
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 5: ELECTRICAL SCHEMATICS
WHIRL WIZARD 115 VOLT - 60 HZ - SINGLE PHASE
9905-011-70-30
SEQUENCE OF OPERATION
1. After the sink is filled with water, power switch (S1) is placed in the “ON” position.
2. Motor contactor (R1) is energized.
3. Pump motor (M1) starts.
4. Heater element (H1) is energized.
5. Power light (E1) is energized.
NOTE: THE HEATER ELEMENT CONTAINS AN INTERNALLY-MOUNTED THERMOSTAT TO REGULATE THE TEMPERA-
TURE OF THE ELEMENT.
Whirl Wizard Technical Manual 7610-011-70-65
Issued: 08-20-2007 Revised: N/A
14
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 5: ELECTRICAL SCHEMATICS
WHIRL WIZARD 240 VOLT - 50/60 HZ - SINGLE PHASE
9905-002-33-80
SEQUENCE OF OPERATION
1. After the sink is filled with water, power switch (S1) is placed in the “ON” position.
2. Motor contactor (R1) is energized.
3. Pump motor (M1) starts.
4. Heater element (H1) is energized.
5. Power light (E1) is energized.
NOTE: THE HEATER ELEMENT CONTAINS AN INTERNALLY-MOUNTED THERMOSTAT TO REGULATE THE TEMPERA-
TURE OF THE ELEMENT.
Whirl Wizard Technical Manual 7610-011-70-65
Issued: 08-20-2007 Revised: N/A
15
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 6:
JACKSON MAINTENANCE &
REPAIR CENTERS
16
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 6: JACKSON MAINTENANCE & REPAIR CENTERS
ALABAMA TO FLORIDA
ALABAMA
CALIFORNIA
P & D APPLIANCE
4220-C ROSEVILLE ROAD
NORTH HIGHLANDS, CA
95660
GCS SERVICE INC.
PHILADELPHIA, PA
(215)925-6217
JONES-McLEOD APPLIANCE
SVC
1616 7TH AVE. NORTH
BIRMINGHAM, AL 35203
(205) 251-0159
800-821-1150
FAX: (205) 322-1440
BARKERS FOOD MACHINERY
SERVICES
5367 SECOND STREET
IRWINDALE, CA 91706
(626) 960-9390
800-258-6999
FAX: (626) 337-4541
800-441-9115
(916) 974-2772
FAX: (215) 925-6208
800-824-7219
FAX:(916) 974-2774
ELMER SCHULTZ SERVICE
36 BELMONT AVE.
WILLMINGTON, DE 19804
(302) 655-8900
800-225-0599
FAX: (302) 656-3673
COMMERCIAL APPLIANCE
SERVICE, INC.
281 LATHROP WAY, #100
SACRAMENTO, CA 95815
(916) 567-0203
JONES-McLEOD APPLIANCE
SVC
GCS SERVICE INC.
LOS ANGELES, CA
(213) 683-2090
800-327-1433
FAX: (213) 683-2099
854 LAKESIDE DRIVE
MOBILE, AL 36693
(251) 666-7278
(800) 464-2222
(916) 567-0324 FAX
EMR SERVICE DIVISION
106 WILLIAMSPORT CIRCLE
SALISBURY, MD 21804
(410) 543-8197
800-237-9859
FAX: (251) 661-0223
COLORADO
GCS SERVICE INC.
SANTA ANA, CA
(714) 542-1798
800-540-0719
FAX: (714) 542-4787
GCS SERVICE INC.
SHERIDAN, CO
(303) 371-9054
800-972-5314
FAX: (303) 371-4754
FAX: (410) 548-4038
ALASKA
FLORIDA
RESTAURANT APPLIANCE
SERVICE
7219 ROOSEVELT WAY NE
SEATTLE, WA 98115
(206) 524-8200
800-433-9390
FAX: (206) 525-2890
COMMERCIAL APPLIANCE
SERVICE
GCS SERVICE INC.
S. SAN FRANCISCO, CA
(650) 635-0720
800-969-4427
FAX: (650) 871-4019
HAWKINS COMMERCIAL
APPLIANCE SERVICE
3000 S. WYANDOT ST.
ENGLEWOOD, CO 80110
(303) 781-5548
(800) 624-2117
FAX: (303) 761-5561
8416 LAUREL FAIR CIRCLE
BLDG 6, SUITE 114
TAMPA, FL 33610
(813) 663-0313
800-282-4718
COMMERCIAL APPLIANCE
SERVICE, INC.
6507 PACIFIC AVENUE, SUITE
102
STOCKTON, CA 95207
(916) 567-0203
(800) 464-2222
(916) 567-0266 FAX
FAX: (813) 663-0212
commercialappliance@world-
net.att.net
ARIZONA
AUTHORIZED COMMERCIAL
FOOD EQMT. SVC
4832 SOUTH 35TH STREET
PHOENIX, AZ 85040
(602) 234-2443
800-824-8875
FAX: (602) 232-5862
METRO APPLIANCE SERVICE
1640 S BROADWAY
DENVER, CO 80210
(303) 778-1126
800-525-3532
FAX: (303) 778-0268
GCS SERVICE INC
MIAMI, FL
(305) 621-6666
800-766-8966
FAX: (305) 621-6656
GCS SERVICE INC.
SAN DIEGO, CA
(858) 549-8411
800-422-7278
FAX: (858) 549-2323
GCS SERVICE INC
ORLANDO, FL
GCS SERVICE INC.
PHOENIX, AZ
CONNECTICUT
(407) 841-2551
800-338-7322
(602) 474-4510
GCS SERVICE INC.
HARTFORD, CT
(860) 549-5575
800-423-1562
FAX: (860) 527-6355
FAX: (407) 423-8425
800-510-3497
INDUSTRIAL ELECTRIC SVC.
5662 ENGINEER DRIVE
HUNTINGTON BEACH, CA
92649
FAX: (602) 470-4511
NASS PARTS AND SERVICE,
INC.
ARKANSAS
1144 BELVILLE ROAD, UNIT
359
(714) 379-7100
BROMLEY PARTS & SVC
10TH AND RINGO
(800-457-3783
SUPERIOR KITCHEN SER-
VICE INC.
DAYTONA BEACH, FL 32114
(386) 226-2642
FAX: (714) 379-7109
P.O. BOX 1688
22 THOMPSON ROAD
WINDSOR, CT 06088
(888) 590-1899
(800) 432-2795
(386) 736-7695 FAX
LITTLE ROCK, AR 72202
(501) 374-0281
P & D APPLIANCE SVC
100 SOUTH LINDEN AVE.
S. SAN FRANCISCO, CA 94080
(650) 635-1900
800-424-1414
FAX: (650) 635-1919
800-482-9269
(888) 590-1996 FAX
GCS SERVICE INC
TAMPA, FL
FAX: (501) 374-8352
DELAWARE
(813) 626-6044
800-282-3008
FOOD SERVICE EQMT.
2101 PARKWAY SOUTH
BROOMALL, PA 19008
(610) 356-6900
FAX: (610) 356-2038
FAX: (813) 621-1174
GCS SERVICE,INC.
3717 CHERRY ROAD
MEMPHIS, TN 38118
(901) 366-4587
800-262-9155
FAX: (901) 366-4588
Whirl Wizard Technical Manual 7610-011-70-65
Issued: 08-20-2007 Revised: N/A
17
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 6: JACKSON MAINTENANCE & REPAIR CENTERS
FLORIDA TO MARYLAND
JONES-McLEOD APPLIANCE
SVC
HAWAII
INDIANA
CERTIFIED SERVICE CENTER
1051 GOODWIN DRIVE
LEXINGTON, KY 40505
(606) 254-8854
854 LAKESIDE DRIVE
MOBILE, AL 36693
(251) 666-7278
FOOD EQMT. PARTS &
SERVICE CO.
GCS SERVICE INC.
INDIANAPOLIS, IN
(317) 545-9655
800-727-8710
FAX: (317) 549-6286
300 PUUHALE RD.
HONOLULU, HI 96819
(808) 847-4871
800-237-9859
FAX: (251) 661-0223
800-432-9269
FAX: (606) 231-7781
FAX: (808) 842-1560
B622 LA PAS TRAIL
INDIANAPOLIS, IN 46268
(317) 290-8060
(800) 410-9794
(317) 290-8085 FAX
NASS PARTS AND SERVICE,
INC.
GCS SERVICE INC.
LOUISVILLE, KY
(502) 367-1788
800-752-6160
FAX: (502) 367-0400
IDAHO
1108 SOUTH WOODS AVENUE
ORLANDO, FL 32805
(407) 425-2681
RESTAURANT APPLIANCE
SVC.
7219 ROOSEVELT WAY NE
SEATTLE, WA 98115
(206) 524-8200
800-433-9390
FAX: (206) 525-2890
(800) 432-2795
(407) 425-3463 FAX
IOWA
GOODWIN TUCKER GROUP
GCS SERVICE INC.
LEXINGTON, KY
(606) 255-0746
800-432-9260
FAX: (606) 255-0748
NASS PARTS AND SERVICE,
INC.
2900 DELAWARE AVENUE
DES MOINES, IA 50317
(515) 262-9308
800-372-6066
FAX: (515) 262-2936
1376 HEIDE AVENUE
PALM BAY, FL 32907
(321) 952-2012
RON'S SERVICE
LOUISIANA
(800) 432-2795
(321) 953-0266 FAX
703 E 44TH STREET STE 10
GARDEN CITY, ID 83714
(208) 375-4073
HERITAGE SERVICE GROUP
1532 RIVER OAKS WEST
NEW ORLEANS, LA 70123
(504) 734-8864
(800) 499-2351
(504) 733-2559 FAX
CONES REPAIR SVC.
1056 27TH AVENUE SW
CEDAR RAPIDS, IA 52404
(319) 365-3325
800-747-3326
FAX: (319) 365-0885
GEORGIA
FAX: (208) 375-4402
GCS SERVICE INC
ATLANTA, GA
ILLINOIS
(770) 452-7322
800-334-3599
CONES REPAIR SVC.
2408 40TH AVE.
MOLINE, IL 61265
(309) 797-5323
800-716-7070
FAX: (309)797-3631
MAINE
FAX: (770) 452-7473
KANSAS
GCS SERVICE INC.
CHELSEA, MA
HERITAGE FOODSERVICE
GROUP OF ATLANTA
2100 NORCROSS PKWY.
SUITE 130
NORCROSS, GA 30071
(770) 368-1465
866-388-9837
FAX: (866) 388-9838
GCS SERVICE INC.
KANSAS CITY, MO
(816) 920-5999
800-229-6477
FAX: (816) 920-7387
(617) 889-9393
800-225-1155
FAX: (617) 889-1222
EICHENAUER SERVICES INC.
130 S OAKLAND ST.
DECATUR, IL 62522
(217) 429-4229
800-252-5892
FAX: (217) 429-0226
MASSACHUSETTS RESTAU-
RANT SUPPLY
GENERAL PARTS, INC.
1101 E. 13TH STREET
KANSAS CITY, MO 64106
(816) 421-5400
(800) 279-9967
(816) 421-1270 FAX
34 SOUTH STREET
SOMERVILLE, MA 02143
(617) 868-1930
WHALEY FOODSERVICE
REPAIRS
109-A OWENS INDUSTRIAL
DRIVE
SAVANNAH, GA 31405
(912) 447-0827
888-765-0036
FAX: (912) 447-0826
800-338-6737
FAX: (617) 686-5331
GCS SERVICE INC.
ELMHURST, IL
KENTUCKY
PINE TREE FOOD EQUIP-
MENT
(630) 941-7800
800-942-9689
CERTIFIED SERVICE CENTER
127 DISHMAN LANE
BOWLING GREEN, KY 42101
(270) 783-0012
(877) 907-0012
FAX: (270) 783-0058
175 LEWISTON ROAD
GRAY, ME 04039
(207) 657-6400
FAX: (630) 941-6048
PIERCE PARTS & SERVICE
2422 ALLEN ROAD
MACON, GA 31216
(478) 781-6003
800-368-2512
FAX: (478) 781-7186
GCS SERVICE INC.
ST. LOUIS, MO
(800) 540-5427
(207) 657-5464 FAX
(314) 683-7444
800-284-4427
MARYLAND
FAX: (314) 638-0135
CERTIFIED SERVICE CENTER
RAMCO BUSINESS PARK
4283 PRODUCE ROAD
LOUISVILLE, KY 40218
(502) 964-7007
800-637-6350
FAX: (502) 964-7202
EMR SERVICE DIVISION
700 EAST 25TH STREET
BALTIMORE, MD 21218
(410) 467-8080
800-879-4994
FAX: (410) 467-4191
GENERAL PARTS, INC.
248 JAMES STREET
BENSONVILLE, IL 60106
(630) 595-3300
(800) 880-3604
FAX: (630)595-0006
Whirl Wizard Technical Manual 7610-011-70-65
Issued: 08-20-2007 Revised: N/A
18
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 6: JACKSON MAINTENANCE & REPAIR CENTERS
MARYLAND TO NEW YORK
EMR SERVICE DIVISION
106 WILLIAMSPORT CIRCLE
SALISBURY, MD 21804
(410) 543-8197
MICHIGAN
GCS SERVICE INC.
ST. LOUIS, MO
NEW HAMPSHIRE
GCS SERVICE INC.
LIVONIA, MI
(314) 638-7444
GCS SERVICE INC.
CHELSEA, MA
800-284-4427
FAX: (314) 638-0135
888-687-8080
(248) 426-9500
800-772-2936
(617)889-9393
FAX: (410) 548-4038
800-225-1155
FAX: (248) 426-7555
KAEMMERLIN PARTS & SVC.
2728 LOCUST STREET
ST. LOUIS, MO 63103
(314) 535-2222
FAX: (314) 535-6205
FAX: (617) 889-1222
EMR SERVICE DIVISION
5316 Sunnyside Ave.
Beltsville, MD 20715
(301) 931-7000
ACE SERVICE CO.
95 HAMPTON AVE.
NEEDHAM, MA 02494
(781) 449-4220
800-225-4510 MA & NH
FAX: (781) 444-4789
JACKSON SERVICE COMPA-
NY
3980 BENSTEIN RD.
COMMERCE TWSHP, MI 48382
(248) 363-4159
800-348-2365
FAX: (301) 931-3060
GCS SERVICE INC.
SILVER SPRING, MD
(301) 585-7550 (DC)
(410) 792-0338 (BALT)
(800) 638-7278
800-332-4053
FAX: (248) 363-5448
GENERAL PARTS, INC.
1101 EAST 13TH STREET
KANSAS CITY, MO 64106
(816) 421-5400
(800) 279-9967
(816) 421-1270 FAX
MASSACHUSETTS RESTAU-
RANT SUPPLY
GCS SERVICE INC.
GRAND RAPIDS, MI
(616) 241-0200
800-823-4866
FAX: (616) 241-0541
34 SOUTH STREET
SOMERVILLE, MA 02143
(617) 868-1930
FAX: (301) 495-4410
MONTANA
800-338-6737
FAX: (617) 868-5331
MASSACHUSETTS
MINNESOTA
RESTAURANT APPLIANCE
SVC.
7219 ROOSEVELT WAY NE
SEATTLE, WA 98115
(206) 524-8200
800-433-9390
FAX: (206) 525-2890
ACE SERVICE CO.
95 HAMPTON AVE.
NEEDHAM, MA 02494
(781) 449-4220
800-225-4510 MA & NH
FAX: (781) 444-4789
NEW JERSEY
GCS SERVICE INC.
MINNEAPOLIS, MN
(612) 546-4221
800-345-4221
FAX: (612) 546-4286
JAY HILL REPAIRS
90 CLINTON RD.
FAIRFIELD, NJ 07004
(973) 575-9145
800-836-0643
FAX: (973) 575-5890
MASSACHUSETTS RESTAU-
RANT SUPPLY
GENERAL PARTS, INC.
11311 HAMPSHIRE AVENUE
SOUTH
NEBRASKA
34 SOUTH STREET
SOMERVILLE, MA 02143
(617) 868-1930
GOODWIN - TUCKER GROUP
7535 D STREET
OMAHA, NE 68124
(402) 397-2880
800-228-0342
FAX: (402) 397-2881
GCS SERVICE INC.
EAST RUTHERFORD, NJ
(973) 614-0003
800-399-8294
FAX: (973) 614-0230
BLOOMINGTON, MN 55438-
2456
800-338-6737
FAX: (617) 868-5331
(952) 944-5800
(800) 279-9980
(800) 279-9980 FAX
GCS SERVICE INC.
CHELSEA, MA
GCS SERVICE INC.
PHILADELPHIA, PA
(215) 925-6217
800-441-9115
FAX: (215) 925-6208
MISSISSIPPI
(617) 889-9393
NEVADA
800-225-1155
GCS SERVICE INC.
JACKSON, MS
FAX: (617) 889-1222
HI TECH COMMERCIAL SER-
VICE
1840 STELLA LAKE STREET
NORTH LAS VEGAS, NV 89106
(702) 649-4616
(877) 924-4832
FAX: (702) 649-4607
(601) 956-7800
GCS SERVICE INC.
HARTFORD, CT
(860) 549-5575
800-723-1562
FAX: (860) 527-6355
800-274-5954
ELMER SCHULTZ SERVICES
201 W. WASHINGTON AVE.
PLEASANTVILLE, NJ 08232
(609) 641-0317
FAX: (601) 956-1200
GCS SERVICE INC.
MEMPHIS, TN
800-378-1641
(901) 366-4587
FAX:(609) 641-8703
SUPERIOR KITCHEN SER-
VICE INC.
800-262-9155
FAX: (901) 366-4588
5454 LOUIE LANE
RENO, NV 89511
(775) 852-9696
399 FERRY STREET
EVERETT, MA 02149
(617) 389-1899
NEW YORK
MISSOURI
FAX: (775) 852-5104
APPLIANCE INSTALLATION
AND SERVICE CORP.
1336 MAIN STREET
BUFFALO, NY 14209
(716) 884-7425
800-722-1252
FAX: (716) 884-0410
(888) 590-1899
(617) 389-1996 FAX
GCS SERVICE INC.
KANSAS CITY, MO
(816) 920-5999
800-229-6477
FAX: (816) 920-7387
GCS SERVICE INC.
LAS VEGAS, NV
(702) 450-3495
800-500-9060
FAX: (702) 450-3491
Whirl Wizard Technical Manual 7610-011-70-65
Issued: 08-20-2007 Revised: N/A
19
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 6: JACKSON MAINTENANCE & REPAIR CENTERS
NEW YORK TO PENNSYLVANIA
B.E.S.T. INC.
AUTHORIZED APPLIANCE
SERVICECENTER
OHIO
OREGON
3003 GENESEE STREET
BUFFALO, NY 14225
(716) 893-6464
904 S. MARSHALL ST.
WINSTON-SALEM, NC 27403
(336) 725-5396
CERTIFIED SERVICE CENTER
890 REDNA TERRACE
CINCINNATI, OH 45215
(513) 772-6600
800-543-2060
FAX: (513) 612-6600
RON'S SERVICE
16364 SW 72ND AVE
PORTLAND, OR 97224
(503) 624-0890
800-338-5011
FAX: (716) 893-6466
FAX:(336) 721-1289
800-851-4118
FAX: (503) 684-6107
AUTHORIZED APPLIANCE
SERVICECENTER
DUFFY'S EQUIPMENT SVC.
3138 ONEIDA STREET
SAUQUOIT, NY 13456
(315) 737-9401
800-443-8339
FAX: (315) 737-7132
104 HINTON AVE.
WILMINGTON, NC 28403
(910) 313-1250
CERTIFIED SERVICE CENTER
171J-K NORTH HAMILTON RD.
COLUMBUS, OH 43213
(614) 751-3769
PENNSYLVANIA
FAX:(910) 313-6130
A.I.S. COMMERCIAL PARTS &
SERVICE
1816 WEST 26TH STREET
ERIE, PA 16508
(814) 456-3732
800-332-3732
FAX: (814) 452-4843
WHALEY FOODSERVICE
8334-K ARROWRIDGE BLVD
CHARLOTTE, NC 28273
(704) 529-6242
FAX: (704) 529-1558
(866) 862-1252
FAX: (614) 751-5792
NORTHERN PARTS & SVC.
21 NORTHERN AVENUE
PLATTSBURGH, NY 12903
(518) 563-3200
800-634-5005
FAX: (800) 782-5424
CERTIFIED SERVICE CENTER
6025 N. DIXIE DRIVE
DAYTON, OH 45414
(937) 898-4040
(800) 257-2611
FAX: (937) 898-4177
WHALEY FOODSERVICE
REPAIRS
203-D CREEK RIDGE RD.
GREENSBORO, NC 27406
(336) 333-2333
FAX: (336) 333-2533
ELMER SCHULTZ SVC.
540 NORTH 3RD STREET
PHILADELPHIA, PA 19123
(215) 627-5400
FAX: (215) 627-5408
GCS SERVICE INC.
BROOKLYN, NY
(718) 486-5220
800-969-4271
FAX: (718) 486-6772
COMMERCIAL PARTS & SVC.
OF COLUMBUS
5033 TRANSAMERICA DRIVE
COLUMBUS, OH 43228
(614) 221-0057
GCS SERVICE INC.
PHILADELPHIA, PA
(215) 925-6217
800-441-9115
FAX: (215) 925-6208
WHALEY FOODSERVICE
REPAIRS
335-105 SHERWEE DRIVE
RALEIGH, NC 27603
(919) 779-2266
FAX: (919) 779-2224
ALL SERVICE KITCHEN
EQUIPMENT REPAIR
10 CHARLES ST.
NEW HYDE PARK, NY 11040
(516) 378-1176
FAX: (516) 378-1735
800-837-8327
FAX: (614) 221-3622
GCS SERVICE INC.
COLUMBUS, OH
(614) 476-3225
800-282-5406
FAX: (614) 476-1196
GCS SERVICE INC.
HARRISBURG, PA
(717) 564-3282
800-367-3225
FAX: (717) 564-9286
ALL ISLAND REPAIRS
40-9 BURT DRIVE
DEER PARK, NY 11729
(631) 242-5588
WHALEY FOODSERVICE
REPAIRS
6418-101 AMSTERDAM WAY
WILMINGTON, NC 28405
(910) 791-0000
ELECTRICAL APPLIANCE
REPAIR SVC.
5805 VALLEY BELT ROAD
CLEVELAND, OH 44131
(216) 459-8700
800-621-8259
FAX: (216) 459-8707
GCS SERVICE INC.
PITTSBURGH, PA
(412) 787-1970
800-738-1221
FAX: (412) 787-5005
FAX: (631) 242-6102
FAX: (910) 791-6662
NORTH CAROLINA
AUTHORIZED APPLIANCE
SERVICECENTER
1020 TUCKASEEGEE RD.
CHARLOTTE, NC 28208
(704) 377-4501
(800) 532-6127
FAX:(704) 377-4504
NORTH DAKOTA
K & D PARTS AND SERVICE
CO.
1833-41 N CAMERON STREET
HARRISBURG, PA 17103
(717) 236-9039
800-932-0503
FAX: (717) 238-4367
GCS SERVICE INC.
MINNEAPOLIS, MN
(612) 546-4221
800-345-4221
FAX: (612) 546-4286
OKLAHOMA
HAGAR RESTAURANT EQMT.
1229 W MAIN STREET
OKLAHOMA CITY, OK 73106
(405) 235-2184
800-445-1791
FAX: (405) 236-5592
AUTHORIZED APPLIANCE
SERVICECENTER
800 N. PERSON ST.
RALEIGH, NC 27604
(919) 834-3476
GENERAL PARTS, INC.
10 SOUTH 18TH STREET
FARGO, ND 58103
(701) 235-4161
(800) 279-9987
(701) 235-0539 FAX
CLARK SERVICE & PARTS
306 AIRPORT DRIVE
BOX 10
SMOKETOWN, PA 17576
(717) 392-5590
(717) 392-5735
FAX:(919) 834-3477
Whirl Wizard Technical Manual 7610-011-70-65
Issued: 08-20-2007 Revised: N/A
20
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 6: JACKSON MAINTENANCE & REPAIR CENTERS
RHODE ISLAND TO WISCONSIN
RHODE ISLAND
WHALEY FOODSERVICE
REPAIRS
GCS SERVICE INC.
HOUSTON, TX
GCS SERVICE INC.
VIRGINIA BEACH, VA
(757) 464-3500
GCS SERVICE INC.
EAST PROVIDENCE, RI
(401) 434-6803
800-462-6012
FAX: (401) 438-9400
4740-A FRANCHISE STREET
N. CHARLESTON, SC 29418
(843) 760-2110
(713)785-9187
800-868-6957
FAX: (713) 785-3979
800-476-4278
FAX: (757) 464-4106
FAX: (843) 760-2255
GCS/STOVE PARTS
2120 SOLANA STREET
FORT WORTH, TX 76117
(817) 831-0381
800-433-1804
FAX: (817) 834-7754
WASHINGTON
SUPERIOR KITCHEN SER-
VICE INC.
SOUTH DAKOTA
GCS SERVICE INC.
SEATTLE, WA
669 ELMWOOD AVENUE
PROVIDENCE, RI 02907
(888) 590-1899
GCS SERVICE INC.
MINNEAPOLIS, MN
(612) 546-4221
800-345-4221
FAX: (612) 546-4286
(206) 763-0353
800-211-4274
FAX: (206) 763-5943
(401) 781-1996 FAX
UTAH
RESTAURANT APPLIANCE
SERVICE
7219 ROOSEVELT WAY, NE
SEATTLE, WA 98115
(206) 524-8200
800-433-9390
FAX: (206) 525-2890
SOUTH CAROLINA
GENERAL PARTS, INC.
10 SOUTH 18TH STREET
FARGO, ND 58103
(701) 235-4161
(800) 279-9987
(701) 235-0539 FAX
LA MONICA'S RESTAURANT
EQMT. SVC.
6182 SOUTH STRATLER
AVENUE
MURRAY, UT 84107
(801) 263-3221
800-527-2561
FAX: (801) 263-3229
AUTHORIZED APPLIANCE
SERVICECENTER
1811 TAYLOR ST.
COLUMBIA, SC 29202
(803) 254-8414
FAX: (803) 254-5146
TENNESSEE
WEST VIRGINIA
AUTHORIZED APPLIANCE
SERVICECENTER
GCS SERVICE INC.
MEMPHIS, TN
STATEWIDE SERVICE, INC.
603 MAIN AVE.
NITRO, WV 25143
(304) 755-1811
(800) 441-9739
FAX: (304) 755-4001
2249 AUGUSTA RD.
GREENVILLE, SC 29605
(864) 235-9616
VERMONT
(901) 366-4587
800-262-9155
NORTHERN PARTS & SVC.
4874 S. CATHERINE STREET
PLATTSBURGH, NY 12901
(518) 563-3200
FAX: (864) 235-9623
FAX: (901) 366-4588
WHALEY FOODSERVICE
REPAIRS
I 26&US1
P.O. BOX 4023
GCS SERVICE INC.
NASHVILLE, TN
(615) 244-8050
800-831-7174
FAX: (615) 244-8885
800-634-5005
FAX: (800) 782-5424
WISCONSIN
WEST COLUMBIA, SC 29170
(803) 791-4420
APPLIANCE SERVICE CEN-
TER, INC.
2439 ATWOOD AVE
MADISON, WI 53704
(608) 246-3160
800-236-7440
FAX: (608) 246-2721
GCS SERVICE INC.
CHELSEA, MA
800-877-2662
TEXAS
FAX: (803) 794-4630
(617)889-9393
ARMSTRONG REPAIR CEN-
TER
5110 GLENMOUNT DRIVE
HOUSTON, TX 77081
(713) 666-7100
800-392-5325
FAX: (713) 661-0520
800-225-1155
FAX: (617) 889-1222
WHALEY FOODSERVICE
REPAIRS
748 CONGAREE ROAD
GREENVILLE, SC 29607
(864) 234-7011
800-494-2539
FAX: (864) 234-6662
VIRGINIA
DAUBERS, INC.
APPLIANCE SERVICE
CENTER, INC.
6843 W. BELOIT RD.
WEST ALLIS, WI 53219
(414) 543-6460
800-236-6460
FAX: (414) 543-6480
7645 DYNATECH COURT
SPINGFIELD, VA 22153
(703) 866-3600
COMMERCIAL KITCHEN
REPAIR CO.
800-554-7788
FAX: (703) 866-4071
WHALEY FOODSERVICE
REPAIRS
1377 N BRAZOS
P.O BOX 831128
1406-C COMMERCE PL.
MYRTLE BEACH, SC 29577
(843) 626-1866
SAN ANTONIO, TX 78207
(210) 735-2811
GCS SERVICE INC.
SILVER SPRING, MD
(301) 585-7550(DC)
(410) 792-0388(BALT)
800-638-7278
APPLIANCE SERVICE
CENTER
786 MORRIS AVE
GREEN BAY, WI 54304
(920) 496-9993
800-236-0871
FAX: (920) 496-9927
800-292-2120
FAX: (843) 626-2632
FAX: (210) 735-7421
FAX: (301)495-4410
GCS SERVICE INC.
DALLAS, TX
GCS SERVICE INC.
RICHMOND, VA
(804) 672-1700
800-899-5949
FAX: (804) 672-2888
(972) 484-2954
800-442-5026
FAX: (972) 484-2531
Whirl Wizard Technical Manual 7610-011-70-65
Issued: 08-20-2007 Revised: N/A
21
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 6: JACKSON MAINTENANCE & REPAIR CENTERS
WISCONSIN TO WYOMING/INTERNATIONAL
GENERAL PARTS, INC.
W223 N735 SARATOGA DRIVE
WAUKESHA, WI 53186
(262) 650-6666
(800) 279-9946
(262) 650-6660 FAX
WYOMING
HAWKINS COMMERCIAL
APPLIANCE SERVICE
3000 S. WYANDOT ST.
ENGLEWOOD, CO 80110
(303) 781-5548
(800) 624-2117
FAX: (303) 761-5561
METRO APPLIANCE SERVICE
1640 S BROADWAY
DENVER, CO 80210
(303) 778-1126
800-525-3532
FAX: (303) 778-0268
INTERNATIONAL
GLOBAL PARTS AND SUPPLY
7758 NW 72ND ST
MIAMI, FL 33166
(305) 885-6353
H.D. SHELDON AND CO
19 UNION SQUARE, WEST
NEW YORK, NY 10003
(212) 627-1759
(212) 924-6920
CANADA
THE GARLAND GROUP
1177 KAMATO ROAD
MISSISSAUGA, ONTARIO L4W
1X4
(905) 206-8380
SALES
(905) 624-1419
FAX: (905) 624-1851
SERVICE
800-427-6668
FAX: 800-361-7745
March 13, 2007
Whirl Wizard Technical Manual 7610-011-70-65
Issued: 08-20-2007 Revised: N/A
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|