JVC Stereo System UX L36V User Manual
COMPACTCOMPONENTSYSTEM  
UX-L46V—ConsistsofCA-UXL46VandSP-UXL46V  
UX-L36V—ConsistsofCA-UXL36VandSP-UXL36V  
STANDBY / ON  
REC  
SURROUND  
AHB PRO.  
CLOCK/TIMER  
AUX/MD  
MICRO COMPONENT SYSTEM UX-L46V  
VOLUME  
—
+
SELECT  
CD  
STANDBY/ON  
1
4
7
2
5
8
3
6
TAPE  
FM/AM  
DISPLAY  
CLOCK  
/TIMER  
DOWN  
UP  
NEXT  
9
RETURN  
PREV  
VCD NUMBER  
SLEEP  
PUSH  
OPEN  
10  
+10  
0
BASS  
TREBLE  
UP  
PREV  
NEXT  
4
7
¢
A
U
T
O
R
E
V
E
R
S
E
SET  
CANCEL  
DOWN  
CD  
TAPE  
FM/AM  
AUX/MD  
3/8  
23  
/SELEC
CD  
0
AUTO  
REV.MODE FM MODE PRESET  
RETURN  
PRGM  
ON  
RANDOM REPEAT  
KARAOKE SCREEN SURROUND AHB PRO  
VIDEO  
MPX  
PBC  
INTRO  
DIGITAL  
ECHO  
STILL  
DIMMER  
VOLUME  
RM-SUXL46V REMOTE CONTROL  
PHONES  
SP-UXL46V  
CA-UXL46V  
SP-UXL46V  
STANDBY / ON  
REC  
REV. MODE  
AHB PRO.  
CLOCK/TIMER  
AUX/MD  
MICRO COMPONENT SYSTEM UX-L36V  
VOLUME  
—
+
SELECT  
CD  
STANDBY/ON  
TAPE  
FM/AM  
1
4
2
5
8
3
6
DOWN  
UP  
NEXT  
DISPLA  
Y
RETURN  
PREV  
VCD NUMBER  
CLOCK  
/TIMER  
7
9
PUSH  
OPEN  
0
10  
BASS  
+10  
SLEEP  
UP  
TREBLE  
A
U
T
O
R
E
V
E
R
S
E
7
PREV  
4
¢
NEXT  
SET  
CANCEL  
DOWN  
3/8  
23  
TAPE  
CD  
FM/AM  
AUX/MD  
AUTO  
REV.MODE FM MODE PRESET  
0CD  
RETURN  
PRGM  
ON  
RANDOM REPEAT  
AHB PRO  
KARAOKE SCREEN  
VIDEO  
INTRO  
MPX  
PBC  
DIGITAL  
ECHO  
STILL  
DIMMER  
—
VOLUME  
COMPACT  
RM-SUXL36V REMOTE CONTROL  
PHONES  
DIGITAL VIDEO  
SP-UXL36V  
CA-UXL36V  
SP-UXL36V  
INSTRUCTIONS  
For Customer Use:  
Enter below the Model No. and Serial No.  
which are located either on the rear, bot-  
tom or side of the cabinet. Retain this  
information for future reference.  
Model No.  
Serial No.  
GVT0095-003A  
[US,UN]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT FOR LASER PRODUCTS  
REPRODUCTION OF LABELS /  
/
2
2
WARNING LABEL, PLACED INSIDE THE UNIT  
1
CLASSIFICATION LABEL, PLACED ON REAR ENCLOSURE  
1
ADVARSEL: Usynlig laser-  
stråling ved åbning, når  
sikkerhedsafbrydere er ude  
af funktion. Undgå udsæt-  
VARO: Avattaessa ja suo-  
jalukitus ohitettaessa olet  
CAUTION: Invisible laser  
radiation when open and  
interlock failed or defeated.  
AVOID DIRECT EXPOSURE  
VARNING: Osynlig laser-  
strålning när denna del är  
öppnad och spärren är  
alttiina  
lasersäteilylle. Älä katso  
säteeseen. (f)  
näkymättömälle  
CLASS  
LASER  
1
urkopplad.  
Betrakta  
ej  
(s)  
telse for stråling  
(d)  
TO BEAM.  
(e)  
strålen.  
PRODUCT  
1. CLASS 1 LASER PRODUCT  
2. CAUTION: Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam.  
3. CAUTION: Do not open the top cover. There are no user serviceable parts inside the Unit; leave all servicing to  
qualified service personnel.  
SS  
Caution: Proper Ventilation  
To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:  
1 Front:  
No obstructions and open spacing.  
2 Sides/ Top/ Back:  
No obstructions should be placed in the areas shown by the dimensions below.  
3 Bottom:  
Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm or more.  
15 cm  
15 cm  
15 cm  
1 cm  
15 cm  
1 cm  
15 cm  
UX-L46V  
UX-L36V  
10 cm  
UX-L46V/UX-L36V  
– G-2 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
We would like to thank you for purchasing one of our JVC products.  
Before operating this unit, read this manual carefully and thoroughly to  
obtain the best possible performance from your unit, and retain this manual  
for future reference.  
Power sources  
• When unplugging from the wall outlet, always pull the  
plug, not the AC power cord.  
About This Manual  
This manual is organized as follows:  
• The manual mainly explains operations using the  
buttons on the remote control.  
DO NOT handle the AC power cord with wet  
hands.  
You can use the buttons both on the remote control and  
on the unit for the same operations if they have the  
same or similar names (or marks), unless mentioned  
otherwise.  
• Basic and common information that is the same for many  
functions is grouped in one place, and is not repeated in  
each procedure. For instance, we do not repeat the  
information about turning on/off the unit, setting the  
volume, changing the sound effects, and others, which are  
explained in the section “Common Operations” on pages 9  
to 11.  
Moisture condensation  
Moisture may condense on the lens inside the unit in the  
following cases:  
• After starting heating in the room  
• In a damp room  
• If the unit is brought directly from a cold to a warm place  
Should this occur, the unit may malfunction. In this case,  
leave the unit turned on for a few hours until the moisture  
evaporates, unplug the AC power cord, and then plug it in  
again.  
• The following marks are used in this manual:  
Gives you warnings and cautions to prevent  
from damage or risk of fire/electric shock.  
Also gives you information which is not good  
for obtaining the best possible performance  
from the unit.  
Others  
• Should any metallic object or liquid fall into the unit,  
unplug the unit and consult your dealer before operating  
any further.  
• If you are not going to operate the unit for an extended  
period of time, unplug the AC power cord from the wall  
outlet.  
Gives you information and hints you had better  
know.  
DO NOT disassemble the unit since there are no  
user serviceable parts inside.  
The illustrations used in this manual are of UX-L46V  
unless mentioned otherwise.  
If anything goes wrong, unplug the AC power cord and  
consult your dealer.  
Precautions  
Which compact discs can be used?  
Many types of compact discs are sold for a variety of uses.  
The player can play the following compact discs:  
Installation  
• Install in a place which is level, dry and neither too hot nor  
too cold—between 5˚C and 35˚C.  
Video CD discs both with and without PBC  
• Install the unit in a location with adequate ventilation to  
prevent internal heat built-up in the unit.  
• Leave sufficient distance between the unit and the TV.  
• Keep the speakers away from the TV to avoid interference  
with TV.  
COMPACT  
Audio CD discs  
DIGITAL VIDEO  
COMPACT  
DIGITAL AUDIO  
Discs you cannot playback  
DO NOT install the unit in a location near heat  
sources, or in a place subject to direct sunlight,  
excessive dust or vibration.  
Any other discs than listed above (such as CD-ROM, DVD,  
CD-G or CD-I Discs) cannot be played. Playing back such  
discs may generate noise and damage your speakers.  
Even though a logo listed above is printed on the disc, it may  
not be played if it is a non-standard disc.  
– 1 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Location of the Buttons and Controls ....................... 3 Using the Video CD Player (Video CDs)................. 19  
Remote Control .......................................................... 3  
Front Panel and Top View .......................................... 4  
Setting the TV System.............................................. 19  
Playing Video CDs with the PBC Function ............. 19  
Playing Video CDs with the PBC Function without  
Using the Menu Screen (Continuous Play) ........ 19  
Playing Video CDs with the PBC Function  
Getting Started............................................................ 6  
Using the Menu Screen (Menu-Driven Play) ..... 20  
Playing video CDs without the PBC Function......... 21  
Various Functions to Enhance Your Enjoyment ....... 21  
Supplied Accessories.................................................. 6  
Putting the Batteries into the Remote Control ........... 6  
Connecting Antennas ................................................. 6  
Connecting Speakers .................................................. 7  
Connecting Other Equipment..................................... 8  
Adjusting the Voltage Selector ................................... 8  
Playing Back Tapes ................................................... 23  
Playing Back a Tape ................................................. 23  
Common Operations .................................................. 9  
Recording .................................................................. 24  
Setting the Clock ........................................................ 9  
Setting the AM Tuner Interval Spacing ...................... 9  
Turning On the Power .............................................. 10  
Selecting the Sources and Starting Play ................... 10  
Adjusting the Volume ............................................... 10  
Adjusting the Tone (Bass/Treble)............................. 11  
Reinforcing the Bass Sound ..................................... 11  
Reinforcing the Surround Effect  
Recording on a Tape ................................................. 24  
CD Direct Recording................................................ 25  
One Track Recording ............................................... 25  
Using the Microphone and Multiplex CDs ............. 26  
Singing Along – Karaoke ......................................... 26  
Microphone Mixing ................................................. 26  
To Record Microphone Mixing on a Tape ............... 27  
Using the Multiplex CDs and Singing Along with  
Multiplex (MPX) Karaoke CDs ......................... 27  
(ONLY FOR UX-L46V) .................................... 11  
Selecting the Illumination Brightness ...................... 11  
Listening to FM and AM Broadcasts ...................... 12  
Using the Timers ....................................................... 28  
Tuning in to a Station ............................................... 12  
Presetting Stations .................................................... 12  
Tuning in to a Preset Station .................................... 13  
Using Daily Timer and Recording Timer ................. 28  
Using Sleep Timer .................................................... 29  
Disc Introduction ...................................................... 14  
Maintenance .............................................................. 30  
Troubleshooting ........................................................ 31  
Specifications............................................................. 32  
Playing Back Discs (CD/CD-R/CD-RW/MP3) ....... 15  
Loading Disc ............................................................ 15  
Playing Back the Entire CD—Normal Play ............. 15  
Basic CD Operations ................................................ 16  
Programming the Playing Order of the Tracks  
—Program Play .................................................. 17  
Playing at Random—Random Play ......................... 18  
Repeating Tracks—Repeat Play............................... 18  
Prohibiting Disc Ejection—Tray Lock .................... 18  
– 2 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Location of the Buttons and Controls  
Become familiar with the buttons and controls on your unit.  
Remote Control  
For UX-L46V  
For UX-L36V  
STANDBY/ON  
DISPLAY  
STANDBY/ON  
1
4
3
6
2
5
8
1
4
7
3
6
2
5
8
t
y
u
i
o
t
y
u
i
o
DISPLAY  
CLOCK  
/TIMER  
CLOCK  
/TIMER  
1
1
7
9
9
+10  
10  
BASS  
SLEEP  
SLEEP  
+10  
10  
UP  
TREBLE  
TREBLE  
BASS  
2
2
UP  
7
NEXT  
PREV  
PREV  
NEXT  
4
¢
4
¢
7
3
4
5
3
4
5
SET  
CANCEL  
SET  
CANCEL  
DOWN  
DOWN  
;
;
23  
TAPE  
3/8  
CD  
AUX/MD  
TAPE  
FM/AM  
CD  
FM/AM  
AUX/MD  
3/8  
23  
AUTO  
AUTO  
/SELECT  
CD  
0
PRESET  
0CD  
REV.MODE FM MODE  
PRESET  
REV.MODE FM MODE  
6
7
8
9
p
q
w
e
r
6
7
8
9
p
q
w
e
r
a
s
d
a
s
d
RETURN  
PRGM  
ON  
RANDOM REPEAT  
AHB PRO  
RETURN  
PRGM  
ON  
RANDOM REPEAT  
KARAOKE SCREEN  
KARAOKE SCREEN SURROUND AHB PRO  
f
g
h
j
f
VIDEO  
INTRO  
VIDEO  
PBC  
MPX  
MPX  
PBC  
INTRO  
g
h
DIGITAL  
ECHO  
DIGITAL  
ECHO  
STILL  
DIMMER  
STILL  
DIMMER  
—
VOLUME  
VOLUME  
k
j
RM-SUXL36V REMOTE CONTROL  
RM-SUXL46V REMOTE CONTROL  
1 Number buttons  
2 BASS button (11)  
3 Multi operation buttons  
1 Number buttons  
2 BASS button (11)  
3 Multi operation buttons  
• 3 UP, PREV 4 (reverse skip), 7 (stop), NEXT ¢ (forward  
skip) and 4 DOWN  
• 3 UP, PREV 4 (reverse skip), 7 (stop), ¢ NEXT (forward  
skip) and 4 DOWN  
4 SET button (13, 17)  
4 SET button (13, 17)  
5 Source buttons  
5 Source buttons  
• CD 3/8, TAPE 2 3, FM/AM and AUX/MD  
Pressing one of these buttons also turns on the unit.  
6 SELECT CD 0 (disc tray open/close) button (15)  
Pressing this button also turns on the unit.  
7 REV.MODE (reverse mode) button (23 – 24)  
8 RETURN button (20, 21)  
• 3/8 CD, 2 3 TAPE, FM/AM and AUX/MD  
Pressing one of these buttons also turns on the unit.  
6 0 CD (disc tray open/close) button (15)  
Pressing this button also turns on the unit.  
7 REV.MODE (reverse mode) button (23 – 24)  
8 RETURN button (20, 21)  
9 KARAOKE button (26)  
9 KARAOKE button (26)  
p ON SCREEN button (22)  
p ON SCREEN button (22)  
q MPX button (27)  
q MPX button (27)  
w PBC button (20)  
w PBC button (20)  
e DIGITAL ECHO button (26, 27)  
r STILL button (21)  
e DIGITAL ECHO button (26, 27)  
r STILL button (21)  
t STANDBY/ON  
button (10, 29)  
t STANDBY/ON  
button (10, 29)  
y DISPLAY button (9)  
y DISPLAY button (9)  
u CLOCK/TIMER button (9, 28, 29)  
i SLEEP button (29)  
u CLOCK/TIMER button (9, 28, 29)  
i SLEEP button (29)  
o TREBLE button (11)  
o TREBLE button (11)  
; CANCEL button (17)  
; CANCEL button (17)  
a AUTO PRESET button (12)  
s FM MODE button (12)  
a AUTO PRESET button (12)  
s FM MODE button (12)  
d CD play mode buttons (17, 18, 19)  
• PRGM (program), RANDOM and REPEAT  
f AHB (Active Hyper Bass) PRO button (11)  
g SURROUND button (11)  
h VIDEO INTRO button (22)  
j VOLUME + / – button (10)  
k DIMMER button (11)  
d CD play mode buttons (17, 18, 19)  
• PRGM (program), RANDOM and REPEAT  
f AHB (Active Hyper Bass) PRO button (11)  
g VIDEO INTRO button (22)  
h VOLUME + / – button (10)  
j DIMMER button (11)  
– 3 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continued  
Front Panel and Top View  
Front Panel  
q
STANDBY / ON  
1
w
2
e
r
t
3
For UX-L46V  
REC  
AHB PRO.  
CLOCK/TIMER  
AUX/MD  
SURROUND  
MICRO COMPONENT SYSTEM  
For UX-L36V  
REV.MODE  
VOLUME  
4
5
6
—
+
SELECT  
y
u
CD  
TAPE  
7
8
FM/AM  
UP  
NEXT  
DOWN  
PREV  
RETURN  
VCD NUMBER  
i
o
;
PUSH  
OPEN  
0
A
U
T
O
R
E
V
E
R
S
E
9
PHONES  
p
Top View  
a
s
– 4 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Display Window  
1
2
3
4
[
]
DAILY REC SLEEP REC  
ST  
SURROUND  
BASS  
5
6
MONO  
PBC  
MP3  
PRGM  
RANDOM  
ALL  
q
p
8 7  
9
See pages in the parentheses for details.  
Front Panel  
1 STANDBY/ON  
Display Window  
1 Timer indicators  
button and STANDBY/ON lamp  
(9, 10, 18, 29)  
•
(timer), DAILY, REC and SLEEP  
2 Disc tray  
2 REC (recording) indicator  
3 For UX-L46V: SURROUND button (11)  
3 SURROUND indicator (ONLY FOR UX-L46V)  
4 BASS indicator  
5 MONO indicator  
For UX-L36V: REV.MODE (reverse mode) button (23, 24, 25)  
4 REC (recording) button (24, 25)  
5 Display window  
6 Tape operation indicators  
6 VOLUME + / – control (10)  
7 SELECT CD 3/8 (play/pause) button (10, 15 – 16, 19 –  
20, 22)  
• 2 3 (tape direction) and  
7 PBC indicator  
8 MP3 indicator  
(reverse mode)  
Pressing this button also turns on the unit.  
8 RETURN button (20, 21)  
9 Cassette holder  
9 Main display  
• Shows the source name, frequency, etc.  
p ST (stereo) indicator  
p PHONES jack (10)  
q CD play mode indicators  
q Remote sensor  
• PRGM (program), RANDOM and  
w 0 (disc tray open/close) button (15)  
Pressing this button also turns on the unit.  
e AHB (Active Hyper Bass) PRO button (11)  
r CLOCK/TIMER button (9, 28, 29)  
t AUX/MD button (10)  
/
ALL (repeat one/repeat all)  
Pressing this button also turns on the unit.  
y TAPE 2 3 button (10, 23 – 24)  
Pressing this button also turns on the unit.  
u FM/AM button (10, 12, 13)  
Pressing this button also turns on the unit.  
i VCD NUMBER button (20)  
o 0 PUSH OPEN (cassette holder open) portion (23, 24 –  
25)  
STANDBY / ON  
REC  
SURROUND  
AHB PRO.  
CLOCK/TIMER  
MICRO COMPONENT SYSTEM UX-L46
VOLUME  
; Multi operation buttons  
• PREV 4 (reverse skip)/DOWN, 7 (stop)  
and ¢ NEXT (forward skip)/UP  
a Mic jack (26, 27)  
—
s VOLUME control (26, 27)  
When using the remote control, point it at  
the remote sensor on the front panel.  
– 5 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Continued  
Supplied Accessories  
Connecting Antennas  
Make sure that you have all the following items.  
The number in the parentheses indicates the quantity of the  
pieces supplied.  
FM antenna  
ANTENNA  
• AM loop antenna (1)  
• FM antenna (1)  
• Remote control (1)  
• Batteries (2)  
T
L
X
P
E
O
O
FM antenna (supplied)  
M
5
7
M
O
L
F
C
A
I
X
A
• Speaker cords (2) (ONLY FOR UX-L46V)  
• AC plug adaptor (1)  
• Video cord (1)  
If anything is missing, consult your dealer immediately.  
Putting the Batteries into the Remote Control  
1 Attach the FM antenna to the FM 75 Ω  
COAXIAL terminal.  
Insert the batteries—R6(SUM-3)/AA(15F)—into the  
remote control, by matching the polarity (+ and –) on the  
batteries with the + and – markings on the battery  
compartment.  
When the remote control can no longer operate the unit,  
replace both batteries at the same time.  
2 Extend the FM antenna.  
3 Fasten it up in the position which gives you  
the best reception, then fix it on the wall, etc.  
1
About the supplied FM antenna  
The FM antenna supplied with this unit can be used as temporary  
measure. If reception is poor, you can connect an outdoor FM  
antenna.  
To connect an outdoor FM antenna  
Before connecting it, disconnect the supplied FM antenna.  
R6(SUM-3)/AA(15F)  
Outdoor FM antenna  
(not supplied)  
2
3
Coaxial cable (not supplied)  
ANTENNA  
T
L
X
P
E
O
O
M
5
X
7
A
M
L
F
A
I
O
C
• DO NOT use an old battery together with a new  
one.  
• DO NOT use different types of batteries together.  
• DO NOT expose batteries to heat or flame.  
• DO NOT leave the batteries in the battery  
compartment when you are not going to use the  
remote control for an extended period of time.  
Otherwise, it will be damaged from battery  
leakage.  
A 75 Ω antenna with coaxial type connector  
should be used.  
– 6 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AM antenna  
Connecting Speakers  
2
1
3
ANTENNA  
Vinyl-covered wire  
(not supplied)  
For UX-L46V  
1
SPEAKERS  
RIGHT  
LEFT  
AM EXT  
AM LOOP  
Speaker cord  
Speaker cord  
FM75  
COAXIAL  
SPEAKER  
IMPEDANCE  
MIN  
6
INPUT  
INPUT  
2
For UX-L36V  
AM loop antenna  
(supplied)  
1 Connect the AM loop antenna to the AM  
LOOP terminals as illustrated.  
• If cords are covered with insulation, twist  
the core of the cord at the end of each cord,  
then remove the insulation.  
Right speaker  
Left speaker  
2 Turn the AM loop antenna until you have the  
best reception.  
1 Press and hold the clamp of the speaker  
terminal on the rear of the unit.  
To connect an outdoor AM antenna  
When reception is poor, connect a single vinyl-covered wire  
to the AM EXT terminal and extend it horizontally. (The AM  
loop antenna must remain connected.)  
2 Insert the end of the speaker cord to the  
terminal.  
Match the polarity between the unit and the speaker  
terminals: (+) to (+) and (–) to (–).  
• If cords are covered with insulation, twist  
the core of the cord at the end of each cord,  
then remove the insulation.  
For better reception of both FM and AM  
• Make sure the antenna conductors do not touch any other  
terminals and connecting cords.  
• Keep the antennas away from metallic parts of the unit,  
connecting cords, and the AC power cord.  
3 Release the finger from the clamp.  
IMPORTANT: Use only speakers with the same speaker  
impedance as indicated by the speaker terminals on the  
rear of the unit.  
– 7 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To remove the speaker grilles  
The speaker grilles are removable.  
OPTICAL DIGITAL  
OUT  
Protective plug  
Holes  
Projections  
Before connecting the other  
equipment, remove the protective plug  
from the terminal.  
Audio equipment with  
an optical digital input  
To optical digital input  
Speaker grille  
Connect an optical digital cord (not supplied) between the  
optical digital input terminal on the other equipment and the  
OPTICAL DIGITAL OUT terminal.  
To remove the speaker grille, insert your fingers at the top  
of the speaker grille, pull towards you. Then pull the bottom  
towards you.  
To connect a TV set  
You can connect a TV with a video input jack: used as a  
monitor for video CD playback.  
To attach the speaker grille, put the projections of the  
speaker grille into the holes of the speaker.  
OPTICAL DIGITAL  
OUT  
ANTENNA  
AM EXT  
AM LOOP  
R
L
AUX  
FM75  
COAXIAL  
Connecting Other Equipment  
Auxiliary Equipment  
To video input  
You can connect both of the analog and digital equipment.  
TV  
• DO NOT connect any equipment while the power  
is on.  
• DO NOT plug in any equipment until all  
connections are complete.  
VOLTAGE  
SPEAKERS  
SELECTOR  
RIGHT  
LEFT  
230V  
-240V  
127V  
220V  
110V  
SPEAKER  
IMPEDANCE  
MIN  
6
Adjusting the Voltage Selector  
To connect audio equipment  
Be sure that the plugs of the audio cords are colored: White  
plugs and jacks are for left audio signals, and red ones for  
right audio signals.  
Before plugging in the unit, set the correct voltage for your  
area with the voltage selector on the rear of the unit.  
VOLTAGE  
SELECTOR  
R
L
230V  
-240V  
220V  
AUX  
R
L
127V  
110V  
Voltage mark  
To audio output  
L
Audio equipment  
Use a screwdriver to rotate the voltage selector so the voltage  
number the voltage mark is pointing at is the same as the voltage  
where you are plugging in the unit. (See the back cover page.)  
R
For playing the other equipment through this unit,  
connect between the audio output jacks on the other  
equipment and AUX jacks by using audio cords (not  
supplied).  
DO NOT plug in before setting the voltage selector  
on the rear of the unit and all connection  
procedures are complete.  
Now, you can plug the AC power cord.  
To connect audio equipment with an optical digital  
input terminal  
You can record CD sound onto the connected digital  
equipment.  
• If the wall outlet does not match the AC plug, use the  
supplied AC plug adaptor.  
IMPORTANT: Be sure to check all connections to be  
done before plugging the AC power cord into a wall outlet.  
– 8 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Common Operations  
To adjust the clock again  
Setting the Clock  
1 Make sure (timer) indicator is not lit on the display.  
• If it is lit, press and hold CLOCK/TIMER until it goes  
off.  
2 Press CLOCK/TIMER repeatedly until the unit enters  
the clock setting mode (the hour digit start flashing on  
the display).  
Before operating the unit any further, first set the clock built  
in this unit. When you plug the AC power cord into the wall  
outlet, “0:00” starts flashing on the display.  
You can set the clock whether the unit is on or off.  
• There is a time limit in doing the following steps. If the  
setting is canceled before you finish, start from step 1  
again.  
First time you press CLOCK/TIMER, the unit enters the  
timer setting mode.  
• See pages 28 and 29.  
3 Repeat steps 2 and 3 of the procedure of “Setting the  
Clock.”  
CLOCK  
/TIMER  
1 Press CLOCK/TIMER.  
The hour digits start flashing on the display.  
4 Press and hold CLOCK/TIMER again so that  
(timer) indicator goes off from the display.  
CLOCK/TIMER  
2 Press UP or DOWN to adjust the  
hour, then press CLOCK/TIMER.  
The minute digits start flashing on the display.  
Setting the AM Tuner Interval Spacing  
Some countries space AM stations 9 kHz apart, and some  
countries use 10 kHz spacing.  
DOWN  
UP  
When shipped, the built-in AM tuner is set to 9 kHz spacing.  
You can change it to 9 kHz or 10 kHz spacing only while the  
unit is on standby.  
PREV  
NEXT  
UP  
DOWN  
On the unit ONLY:  
To select 10 kHz intervals, press  
CLOCK  
/TIMER  
CLOCK/TIMER  
DOWN  
PREV  
UP  
NEXT  
STANDBY/ON  
while holding  
¢ NEXT.  
STANDBY / ON  
To select 9 kHz intervals, press  
STANDBY/ON  
while holding  
PREV 4.  
3 Press UP or DOWN to adjust the minute,  
then press CLOCK/TIMER.  
When you change the setting  
The preset stations are erased. You will need to preset the stations  
again. (See page 12 and 13.)  
To check the clock time during play  
On the remote control ONLY:  
DISPLAY  
Press DISPLAY.  
• Each time you press the button, the source  
indication and the clock time alternate on the display.  
• When you unplug the AC power cord or if a power failure  
occurs  
The clock is reset to “0:00” right away. If this happens, set the  
clock again.  
• The clock may gain or lose 1 to 2 minutes per month  
If this happens, set the clock again.  
– 9 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continued  
Turning On the Power  
Adjusting the Volume  
When you press the play button—CD 3/8, TAPE 2 3,  
FM/AM and AUX/MD, the unit automatically turns on and  
starts playback if the source is ready.  
You can adjust the volume level only while the unit is turned  
on. The volume level can be adjusted between “VOL MIN”  
and “VOLUME 1” – “VOLUME 40 (VOL MAX).”  
STANDBY/ON  
To turn on the unit, press  
When using the remote control, press  
VOLUME + to increase the volume or press  
VOLUME – to decrease it.  
STANDBY / ON  
STANDBY/ON  
.
The STANDBY/ON lamp lights  
green and “HELLO” appears on the  
display.  
VOLUME  
When using the unit, turn VOLUME + / –  
clockwise (+) to increase the volume or  
VOLUME  
To turn off the unit (on standby),  
STANDBY/ON  
counterclockwise (–) to decrease it.  
STANDBY / ON  
press STANDBY/ON  
again.  
The STANDBY/ON lamp lights red  
and “GOOD BYE” appears on the  
display.  
• “0:00” flashes on the display until you set the built-in  
clock. After setting the clock, the clock time will appear on  
the display while the unit is on standby.  
• A little power is always consumed even while the unit is on  
standby.  
–
+
For private listening  
Connect the headphones to the PHONES jack. No sound comes out  
of the speakers. Be sure to turn down the volume before connecting  
or putting on headphones.  
To switch off the power supply completely, unplug the AC  
power cord from the AC outlet.  
DO NOT turn off (on standby) the unit with the  
volume set to an extremely high level; otherwise, a  
sudden blast of sound can damage your hearing,  
speakers and/or headphones when you turn on the  
unit or start playing any source next time.  
REMEMBER you cannot adjust the volume level  
while the unit is on standby.  
When you unplug the AC power cord or if a power  
failure occurs  
The clock is reset to “0:00” right away, while the tuner preset  
stations (see page 12) will be erased in a few days.  
Selecting the Sources and Starting Play  
To play back CDs, press CD 3/8. (See pages 15 – 18.)  
To play back tapes, press TAPE 2 3. (See page 23.)  
To listen to FM/AM broadcasts, press FM/AM. (See pages  
12 – 13.)  
To select the external equipment as the source, press  
AUX/MD.  
FM/AM  
AUX/MD  
CD  
TAPE  
When you press the play button for a particular source  
(CD 3/8, TAPE 2 3, FM/AM and AUX/MD), the unit turns  
on (and the unit starts playing the source if it is ready).  
– 10 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the Tone (Bass/Treble)  
Reinforcing the Surround Effect  
(ONLY FOR UX-L46V)  
You can adjust the bass level (low frequency range) and the  
treble level (high frequency range) within the range of –5 to  
+5. Normally set these to 2 (initial setting at factory).  
• This function only affects the playback sound, but does not  
affect your recording.  
• There is a time limit in doing the following steps. If the  
setting is canceled before you finish, start from step 1  
again.  
You can reinforce the surround effect.  
• This function does not affect  
—your recording.  
—playback sound of the monaural sources.  
SURROUND  
To get the effect, press SURROUND so that the  
SURROUND indicator lights up on the display.  
SURROUND  
1 Press BASS to adjust the bass level or press  
SURROUND  
TREBLE to adjust the treble level.  
TREBLE  
BASS  
To cancel the effect, press SURROUND again so  
that the SURROUND indicator goes off.  
2 Press UP to increase the level or press DOWN  
to decrease it.  
Selecting the Illumination Brightness  
DOWN  
PREV  
UP  
NEXT  
You can change the illumination brightness only while the  
unit is turned on.  
UP  
DOWN  
On the remote control ONLY:  
DIMMER  
To change the brightness, press DIMMER.  
• Each time you press the button, the illumination  
dims and brightens alternately.  
Reinforcing the Bass Sound  
You can reinforce the bass sound to maintain rich, full bass at  
low volume.  
• This function only affects the playback sound, but does not  
affect your recording.  
AHB PRO  
To get the effect, press AHB (Active Hyper Bass)  
PRO until “AHB 1” or “AHB 2” appears on the  
display. The BASS indicator also lights up on the  
display.  
AHB PRO  
• Each time you press the button, the bass sound  
change as follows:  
AHB 1  
AHB OFF  
(Canceled)  
AHB 2  
BASS  
“AHB 2” has much more bass reinforcement effect than  
“AHB 1.”  
To cancel the effect, press AHB PRO until “AHB OFF”  
appears on the display and the BASS indicator goes off.  
– 11 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listening to FM and AM Broadcasts  
Continued  
Tuning in to a Station  
Presetting Stations  
You can preset 30 FM and 15 AM stations—using either  
automatic presetting or manual presetting.  
FM/AM  
1 Press FM/AM to select the band.  
The unit automatically turns on and tunes in to  
the previously received station (either FM or  
AM).  
In some cases, test frequencies have been already memorized  
for the tuner since the factory examined the tuner preset  
function before shipment. This is not a malfunction.  
You can preset the stations you want into memory by  
following the presetting method.  
• Each time you press the button, the band  
alternates between FM and AM.  
FM/AM  
To preset stations automatically—Automatic Presetting  
You need to preset stations separately for the FM and AM  
bands.  
PREV  
NEXT  
2 Press and hold PREV ¢ or  
4 NEXT for more than 1  
On the remote control ONLY:  
second.  
FM/AM  
1 Press FM/AM to select the band you  
The unit starts searching for  
DOWN  
UP  
NEXT  
want to preset.  
PREV  
stations and stops when a  
station of sufficient signal  
strength is tuned in.  
If a program is broadcast in  
stereo, the ST (stereo) indicator lights up.  
AUTO  
PRESET  
2 Press and hold AUTO PRESET for  
more than 2 seconds.  
To stop searching, press ¢ NEXT or PREV 4.  
Local stations with strong signals are searched  
and stored in memory automatically.  
When automatic presetting is over, the station  
stored in preset number 1 is received.  
When you press NEXT ¢ or PREV 4 briefly and  
repeatedly  
The frequency changes step by step.  
3 Repeat steps 1 and 2 to store stations for the  
other band.  
To change the FM reception mode  
On the remote control ONLY:  
When an FM stereo broadcast is hard to receive or  
noisy, press FM MODE so that the MONO  
indicator lights up on the display. Reception  
improves.  
FM MODE  
• When you cannot automatically store stations you want  
Stations with weak signals cannot be detected with this automatic  
presetting. To store such a station, use the manual presetting.  
• When you unplug the AC power cord or if a power failure  
occurs  
Preset stations with the automatic presetting are erased at once. If  
this happens, preset the stations again.  
MONO  
To restore the stereo effect, press FM MODE again so that  
the MONO indicator goes off. In this stereo mode, you can  
hear stereo sounds when a program is broadcasted.  
– 12 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To preset stations manually—Manual Presetting  
You need to preset stations separately for the FM and AM  
bands.  
Tuning in to a Preset Station  
On the remote control ONLY:  
• There is a time limit in doing the following steps. If the  
setting is canceled before you finish, start from step 2  
again.  
1 Press FM/AM to select the band.  
The unit automatically turns on and tunes in to  
the previously received station (either FM or  
AM).  
FM/AM  
On the remote control ONLY:  
• Each time you press the button, the band alternates  
between FM and AM.  
1 Tune in to the station you want to preset.  
• See “Tuning in to a Station” on page 12.  
2 Press UP or DOWN to select a  
SET  
UP  
2 Press SET.  
preset number.  
DOWN  
To tune a preset number directly using the number  
buttons  
On the remote control ONLY:  
3 Press UP or DOWN to select a  
Pressing the number button(s) allows  
you to select a preset number you want.  
Ex.: For preset number 5, press 5.  
For preset number 15, press +10,  
then 5.  
UP  
preset number.  
DOWN  
For preset number 20, press +10,  
then 10.  
For preset number 30, press +10,  
+10, then 10.  
SET  
4 Press SET again.  
The tuned station in step 1 is stored in the preset number  
selected in step 3.  
• Storing a new station on a used number erases the  
previously stored one.  
When you unplug the AC power cord or if a power  
failure occurs  
The tuner preset stations will be erased in a few days. If this  
happens, preset the stations again.  
– 13 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc Introduction  
This unit has been designed to playback the following CDs:  
• CD (Audio CD)  
• CD-R (CD-Recordable)  
How are MP3 files recorded and played back?  
MP3 “tracks (files)” can be recorded in “group”—folders or  
directories, in PC terminology.  
• CD-RW (CD-Rewritable)  
• MP3 disc (MP3 files recorded on a CD-R or CD-RW)  
During recording, the tracks and groups can be arranged  
similarly to the tracks and folders/directories of computer  
data. “Root” is similar to the root of a tree. Every track and  
group can be linked to the root.  
Continued use of irregular shape CDs  
(heart-shape, octagonal, etc.) can damage the unit.  
In compliance with ISO 9660, the maximum allowable depth  
of nested directories—so called “hierarchy”—is eight  
(inclusive of the root).  
General Notes  
In general, you will have the best performance by keeping  
your CDs and the mechanism clean.  
• Store CDs in their cases, and keep them in cabinets or on  
shelves.  
Playback order, track search order, and group search order of  
the MP3 tracks recorded on a disc are determined by the  
writing (or encoding) application; therefore, playback order  
may be different from the one you have intended while  
recording the groups and the tracks.  
• Keep the unit’s disc tray closed when not in use.  
The illustration shows an ordinary example of how MP3  
tracks are recorded on a CD-R or CD-RW, how they are  
played back and how they are searched for on this unit.  
• The numbers in circles next to the MP3 tracks ( ) indicate  
the playback order and search order of the MP3 tracks.  
Normally this unit plays back MP3 tracks in the recorded  
order.  
• The numbers inside the groups indicate the playback order  
and search order of the groups on an MP3 disc. Normally  
this unit plays back MP3 tracks in the groups in the  
recorded order.  
What is MP3?  
MP3 is an abbreviation of Motion Picture Experts Group 1  
(or MPEG-1) Audio Layer 3. MP3 is simply a file format  
with a data compression ratio of 1:10 (128 kbps*). By using  
MP3 format, one CD-R or CD-RW can contains 10 times as  
much data volume as a regular CD can.  
* Bit rate is the average number of bits that one second of  
audio data will consume. The unit uses kbps (1,000 bits per  
second). To get a better audio quality, choose a higher bit  
rate. The most popular bit rate for encoding (recording) is  
128 kbps.  
The groups marked with asterisk (*) will be skipped since  
they do not include any MP3 tracks.  
MP3 disc structure  
On an MP3 disc, each song (material) is recorded as a file.  
Files are grouped into a directory (or folder). Directories can  
also include other directories, creating hierarchical directory  
layers. (See “How are MP3 files recorded and played back?” ).  
MP3 group/track configuration:  
Hierarchy  
This unit manages files and directories as “tracks” and  
“groups.” This unit can recognize up to 255 tracks, up to 64  
groups per disc. The unit ignores those exceeding the  
maximum numbers and cannot play them back.  
Root  
1
2
*
About MP3 discs  
3
4
• MP3 discs (either CD-R or CD-RW) require a longer readout time.  
(It varies due to the complexity of the recording configuration.)  
• When making an MP3 disc, select ISO 9660 Level 1 or Level 2 as  
the disc format.  
7
• This unit does not support multisession recording.  
• This unit can play MP3 files only with the following file extensions—  
“.MP3,” “.Mp3,” “.mP3,” and “.mp3.”  
*
8
• Files other than MP3 are ignored.  
• Some MP3 discs may not be played back because of their disc  
characteristics or recording conditions.  
5
6
*
Groups  
MP3 tracks  
1
– 14 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing Back Discs (CD/CD-R/CD-RW/MP3)  
Continued  
To stop playing, press 7.  
When playing a CD-R or CD-RW  
User-edited CD-Rs (CD-Recordable) and CD-RWs  
(CD-ReWritable) can be played back only if they are already  
“finalized.”  
BASS  
• You can play back your original CD-Rs or CD-RWs  
recorded in music CD format or in MP3 format (however,  
they may not be played back depending on their  
characteristics or recording conditions).  
• Before playing back CD-Rs or CD-RWs, read their  
instructions or cautions carefully.  
Total track number  
Total playing time  
To remove the disc, press 0 CD on the remote control (or 0  
on the unit).  
■ For MP3 discs  
• Some CD-Rs or CD-RWs may not be played back on this  
unit because of their disc characteristics, damage or stain  
on them, or if the player’s lens is dirty.  
• CD-RWs may require a longer readout time. This is caused  
by the fact that the reflectance of CD-RWs is lower than for  
regular CDs.  
1 Load a disc.  
The unit searches for the disc (it may take some time),  
and the following information appears on the display (the  
group title will scrolls on the display).  
MP3  
Loading Disc  
Group title of the first group (scrolling)  
/SELECT  
CD  
1 Press SELECT CD 0 on the remote  
control (or 0 on the unit).  
The unit automatically turns on and the disc  
tray comes out.  
MP3  
2 Place a disc correctly on the circle of  
Group number flashes  
Track number  
the disc tray, with its label side up.  
2 Press ¢ NEXT or PREV 4 (or ¢ NEXT/  
PREV 4 on the remote control) to select a  
group you want, then press CD 3/8.  
The group number, track number and track title will scroll  
on the display.  
CORRECT  
INCORRECT  
• When using a CD single (8 cm), place it on the inner  
circle of the disc tray.  
MP3  
3 Press SELECT CD 0 on the remote control  
(or 0 on the unit) again to close the tray.  
Track title of the first group (scrolling)  
Playing Back the Entire CD—Normal Play  
■ For audio CDs  
1 Load a disc.  
MP3  
CD  
Track number flashes  
2 Press CD 3/8.  
The disc tray automatically closes and the first  
track of the CD starts playing.  
3 Press ¢ NEXT or PREV 4 (or ¢ NEXT/  
PREV 4 on the remote control) to select a  
track you want to start playback with, then  
press CD 3/8 again.  
SELECT  
CD  
Track number Elapsed playing time  
• The CD automatically stops when the last track of the  
CD has finished playing.  
Only a maximum of 14 characters (including spaces between words)  
can scroll on the display. The exceeding characters will be ignored.  
– 15 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To stop playing, press 7.  
Basic CD Operations  
To remove disc, press 0 for the corresponding disc tray.  
While playing a CD, you can do the following operations.  
To stop playing for a moment  
Press CD 3/8.  
SELECT  
CD  
While pausing, the elapsed playing time  
flashes on the display.  
CD  
• If the CD cannot be read correctly (because it is scratched, for  
example) or an unreadable CD-R or CD-RW is inserted  
Playback will not start.  
To resume playing, press CD 3/8 again.  
• If no CD is inserted  
“NO DISC” appears on the display.  
To go to another track  
PREV  
NEXT  
Press ¢ NEXT or PREV 4  
repeatedly.  
DO NOT try to open or close the CD tray by hand  
as it will be damaged.  
• ¢ NEXT :  
Skips to the beginning of the  
next or succeeding tracks.  
• PREV 4 :  
DOWN  
PREV  
UP  
NEXT  
Goes back to the beginning of  
the current or previous tracks.  
To go to another track directly using the number  
buttons  
On the remote control ONLY:  
Pressing the number button(s) allows you to start playing the  
track number you want.  
Ex.: For track number 5, press 5.  
For track number 15, press  
+10, then 5.  
For track number 20, press  
+10, then 10.  
For track number 32, press  
+10, +10, +10, then 2.  
To locate a particular point in a track  
During play, press and hold ¢ NEXT  
or PREV 4.  
PREV  
NEXT  
• ¢ NEXT : Fast-forwards the tracks.  
• PREV 4 : Fast-reverses the  
DOWN  
PREV  
UP  
NEXT  
tracks.  
– 16 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To check the program contents  
You can check the program contents by  
pressing ¢ NEXT or PREV 4  
before or after playback.  
Programming the Playing Order of the Tracks  
—Program Play  
PREV  
NEXT  
You can arrange the order in which tracks play before you  
start playing. You can program up to 50 tracks.  
• ¢ NEXT :  
DOWN  
UP  
To check the contents in the  
programmed order.  
• PREV 4 :  
PREV  
NEXT  
On the remote control ONLY:  
1 Load a disc.  
To check the contents in the  
reverse order.  
• If the current playing source is not the CD player, press  
CD 3/8, then 7 before going to the next step.  
To modify the program  
PRGM  
2 Press PRGM (program).  
On the remote control ONLY:  
The PRGM (program) indicator lights up on the  
display.  
CANCEL  
Before or after playing, you can erase the last  
programed track by pressing CANCEL.  
• Each time you press the button, the last  
programed track is erased from the program.  
PRGM  
• If a program has been stored in memory, the program is  
called up.  
To add tracks in the program before playing, simply select  
the track numbers you want to add by following step 3 of the  
programming procedure.  
3 Press UP or DOWN to select the  
UP  
track number, then press SET.  
DOWN  
• You can select the track number directly  
using the number buttons. (See “To go to  
another track directly using the number  
buttons.”)  
SET  
PRGM  
Track number  
Program step number  
4 Repeat step 3 to program other tracks you  
want.  
CD  
5 Press CD 3/8.  
The tracks are played in the order you have  
programed.  
To stop playing, press 7.  
To exit from Program Play mode, press PRGM before or  
after playing. The PRGM (program) indicator goes off.  
To erase the program, press 7 twice.  
• Disc ejection also erases the program.  
If you try to program the 51st track  
“FULL” will appear on the display.  
– 17 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing at Random—Random Play  
Prohibiting Disc Ejection—Tray Lock  
The tracks will play in no particular order when you use this mode. You can lock the disc tray and prohibit to eject the CD.  
On the remote control ONLY:  
On the unit ONLY:  
To prohibit disc ejection, press  
1 Load a CD.  
STANDBY/ON  
while holding 7.  
• If the current playing source is not the CD player, press  
CD 3/8, then 7 before going to the next step.  
• If the disc tray is opened, close it first.  
STANDBY / ON  
RANDOM  
2 Press RANDOM.  
The RANDOM indicator lights up on the  
display and the tracks start playing at random.  
To cancel the prohibition and unlock the CD, press  
STANDBY/ON  
while holding 7.  
CD  
3 Press CD 3/8.  
RANDOM  
Random Play ends when all the tracks are played once.  
To skip the current track, press ¢ NEXT.  
• You cannot go back to the previous track by pressing  
PREV 4.  
If you try to eject the CD while Tray Lock is in use  
“LOCKED” appears to inform you that the disc tray is locked.  
To stop playing, press 7.  
To exit from Random Play mode, press RANDOM again  
before or after playing. Random Play mode is canceled and  
Normal Play resumes.  
• The RANDOM indicator goes off.  
Repeating Tracks—Repeat Play  
You can have all the tracks, the program or individual track  
currently playing to repeat as many times as you like.  
On the remote control ONLY:  
REPEAT  
To repeat playing, press REPEAT before or  
during playing.  
• Each time you press the button, Repeat Play  
mode changes as follows, and the following  
indicator lights up on the display:  
ALL  
Canceled  
:
Repeats one track.  
ALL : In Normal Play mode, repeat all the tracks.  
In Program Play mode, repeat all the tracks in  
the program.  
In Random Play mode, repeats all the tracks in  
random order.  
To stop playing, press 7.  
To cancel Repeat Play mode, press REPEAT repeatedly  
until the repeat indicator goes off.  
– 18 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Video CD Player (Video CDs)  
You can play video CDs (with or without the Playback  
Control (PBC) function) to watch the picture on your TV  
while listening to the sound through your JVC Micro  
• If you play an NTSC CD in PAL AUTO mode on a PAL exclusive  
TV, the image may be distorted. If this happens change the CD  
Player’s TV output mode to “PAL”.  
Component System.  
• When you play an NTSC CD in PAL AUTO mode on a  
multisystem TV, the image may blink for a moment. This  
symptom occurs when the System detects the formula of the CD  
and is not a malfunction.  
• You can configure the current TV output mode by pressing the 7  
button on the Unit for more than 2 seconds during standby mode.  
Before playing video CDs  
Make sure that the connection between the System and your TV is  
correct. (See page 8)  
Setting the TV System  
Playing Video CDs with the PBC Function  
To view a picture of video CDs, it is required that you set  
your CD player’s TV output mode according to your TV’s  
color system.  
The System provides Playback Control (PBC) which utilizes  
a procedure (menu selection) programed into a VCD.  
What is the Playback Control (PBC) function?  
PBC allows you to enjoy the following features:  
• Menu-Driven Play  
Relationship among the playable CDs, System’s TV  
output mode and your TV’s color system:  
You can interact with the TV screen using a menu display  
to select and play an entry.  
• High resolution still image playback  
You can display high-quality images four times clearer than  
video pictures.  
Playable CD Player’s TV output mode Your TV’s color system  
NTSC/PAL  
NTSC/PAL  
NTSC/PAL  
NTSC  
NTSC  
PAL  
PAL  
PAL AUTO  
Multisystem  
DOWN  
PREV  
UP  
NEXT  
To use a Karaoke video CD, see page 26.  
You can play video CDs with PBC function using the menu  
screen (Menu-Driven Play) or without using the menu screen  
(Continuous Play).  
2
3
4
1 Turn off the power to put the System into  
Standby mode.  
2 Press the 7 button on the Unit for more than  
2 seconds.  
• The playback operation procedure may differ depending on the  
video CD you use.  
• Sometimes due to improper manufacturing, video CDs will  
function differently.  
The current TV output mode (“NTSC” for example)  
appears on the display for five seconds.  
3 Within five seconds, press the ¢ NEXT or  
PREV 4 button on the Unit to select the  
System’s TV output mode.  
Playing Video CDs with the PBC Function  
without Using the Menu Screen (Continuous  
Play)  
Each time you press the button, the TV output mode  
changes as follows:  
NTSC O PAL O PAL AUTO O (back to beginning)  
NTSC:  
PAL:  
for NTSC exclusive TV  
for PAL exclusive TV  
You can play video CDs with PBC without using the menu  
screen, as if the CDs had no PBC function.  
PAL AUTO: for multisystem TV  
1 Load a video CD with PBC.  
2 Press the CD 3/8 button.  
Program Play, Random Play, Repeating Tracks:  
Select the mode by pressing the respective button on the  
Remote Control in the same way as for audio CDs. (See  
pages 17 and 18)  
4 Within five seconds, press the 7 button on the  
Unit to apply the changes.  
5 Turn on the TV and select the video input on  
the TV.  
6 Press the SELECT CD 3/8 button to turn  
on the System.  
“JVC VIDEO CD/CD PLAYER” screen will appear on  
the TV without distortion.  
– 19 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                                   
                                        
                                           
≠
                                    
                                        
                                          
                                            
2. Press the ¢ NEXT/PREV 4 buttons to select the  
item (“SEL XX”) and press the SELECT CD 3/8  
button to play it back.  
Playing Video CDs with the PBC Function  
Using the Menu Screen (Menu-Driven Play)  
Before playing, make sure that Repeat indicator “ ” or  
“
” is not lit. If lit, press the REPEAT button on the  
ALL  
PREV  
NEXT  
CD  
Remote Control until the repeat indicator goes off.  
1 Load a video CD with PBC.  
Do not press the CD 3/8 button yet.  
On the Remote Control:  
Pressing the number button(s) allows  
you to start playing the track number  
you want.  
2 Press PBC button on the Remote Control.  
3 Press the CD 3/8 button.  
“PLAY” appears on the display and the first menu will  
appear on the TV screen.  
Ex.: For track number 5, press 5.  
For track number 15, press  
+10, then 5.  
•
If you leave your System on its own, the TV screen  
will change as follows:  
For track number 20, press  
+10, then 10.  
For track number 32, press +10, +10, +10, then 2.  
This depending on the disc you use.  
Part of each movie  
(Back to the  
first Menu)  
First Menu  
Last Menu  
• The next track will be automatically played after the  
current track is finished.  
To return to the previous menu, press the RETURN button  
on the Unit or the RETURN button on the Remote  
Control.  
To pause, press the CD 3/8 button on the Remote Control.  
To stop playback and return to the first menu, press the  
RETURN button repeatedly.  
To stop the video CD, press 7 button.  
To select other items during playback, repeat step 4.  
4 To move through the next menu, press the  
following buttons.  
On the Unit:  
Press the ¢ NEXT or PREV 4 button.  
On the Remote Control:  
Press the NEXT ¢ or PREV 4 button.  
• Program Play, Random Play and Repeating Tracks cannot be  
performed during Menu-Driven Play.  
5 To select the item (track) in the menu and  
play it, press the following buttons.  
Reminder!  
On the Unit:  
Do not pause Video CD for more than 10 minutes to prevent  
screen burns.  
1. Press the VCD NUMBER button for more than 2  
seconds. “SEL 1” will blink on the display.  
Basic Remote Control and Unit Button Functions for Menu-Driven Play:  
Remote Control  
Unit*  
Function  
PREV  
             
4 / NEXT  
                      
¢
PREV 4 / ¢ NEXT Move through menu.  
Number button  
VCD NUMBER  
Select a specific menu item.  
PREV 4 / ¢ NEXT  
Enters the selected video CD number or item. When a part of  
movie is displayed on the TV screen, starts playing that track  
from the beginning.  
SELECT CD 3/8  
Returns to the previous menu during playback.  
RETURN  
RETURN  
* The PBC function button names on the unit and the remote control are printed in orange.  
– 20 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Example of playback using Playback Control (PBC)  
1
2
3
Menu Screen  
1
2
3
press  
RETURN  
1
2
1
2
3
Moving  
Picture  
To next screen  
1
2
3
1
2
press  
RETURN  
Still  
Picture  
Moving  
Picture  
Moving  
Picture  
Moving  
Picture  
Moving  
Picture  
Still  
Picture  
Moving  
Picture  
Moving  
Picture  
To previous screen  
press  
RETURN  
A selection menu is displayed when you start playing a video  
CD with PBC. The selection menu shows a list of numbers  
for selection. Some video CDs may show moving pictures or  
a divided screen.  
• When a list of numbers is displayed, selecting a number  
shows its contents.  
• During playback of a video CD, the following operations may  
distort the image on the TV screen.  
Searching for the beginning of the track, Skipping tracks,  
Stopping/pausing the tracks, or frame-by-frame playback.  
• When a moving picture is displayed, pressing SELECT  
CD 3/8 when the part of the movie you desire is shown  
plays the movie.  
• When the selection menu is re-displayed after you have  
played your selection, selecting a number again can replay  
its contents. (Some video CDs may show the menu screen  
several times)  
Various Functions to Enhance Your Enjoyment  
You can use the following features using the Remote Control.  
Frame-by-Frame Playback  
When “NEXT” and “PREV” are shown, pressing ¢ NEXT Frame-by-Frame playback is possible only when moving  
or PREV 4 can change the selection menu.  
pictures (the video CDs with or without PBC) are played.  
• After playback, press RETURN to go back to the previous  
screen. After playback, pressing RETURN for 2 seconds or  
more causes it to stop. Some video CDs may return you to  
the menu screen shown before playback.  
During playback, press the STILL button to pause the  
video CD.  
Each time you press the STILL button, the picture advances  
by one frame. During Frame-by-Frame playback, no sound  
will be heard.  
To resume Normal Play, press the CD 3/8 button.  
• When a menu screen of a karaoke disc is displayed for about a  
few minutes without any selection being made, it automatically  
starts playing from the first song.  
• When using the REPEAT function, the PBC function is not  
available.  
• You cannot return to the previous frame.  
Playing video CDs without the PBC Function  
Basic playback procedures for video CDs are the same as for  
audio CDs. (See pages 15 and 16)  
• When you start playing a video CD without PBC, “VIDEO  
CD” appears on the display.  
– 21 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Display of Operating Status  
You can view the current operating status on the TV screen.  
Press the ON SCREEN button.  
Pressing the above button alternates between on-screen  
display ON and OFF.  
• Once you have turned on the on-screen display, the track  
number and playing time are always displayed on the TV  
screen.  
Viewing the Video Intro of Video CDs  
You can check the contents of a video CD, watching about  
7 seconds at the beginning of each track on the disc.  
1 Play the video CD with or without PBC.  
• Load the video CD with or without PBC.  
• Press the CD 3/8 button, then press the 7 button.  
2 Press the VIDEO INTRO button.  
The Video Intro play starts whereby about 7 seconds at  
the beginning of the first nine tracks will be played in  
sequence.  
1
4
7
2
5
8
3
6
9
• If the video CD has more than nine tracks, the tracks  
whose track number is greater than nine will be  
displayed on the next page when the 3 UP or ¢  
NEXT is pressed.  
• This function is not available in PBC mode or during  
playback.  
To select a track during Video Intro Play, press the number  
buttons on the Remote Control to select the track to play.  
Continuous play starts from the selected track. When you use  
the Unit, press the VCD NUMBER button for more than 2  
seconds and press the PREV 4 or ¢ NEXT buttons to  
select the track, then press the SELECT CD 3/8 button.  
To stop and cancel the Video Intro Play, press the 7.  
Stop the Video CD playback before enter the video intro mode.  
– 22 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing Back Tapes  
You can play back type I, type II, and type IV tapes without  
changing any settings.  
To stop playing, press 7.  
To fast-wind to the left or to the right, press ¢ NEXT or  
PREV 4 while the tape is not running.  
The tape direction indicator (3 or 2) starts flashing quickly  
on the display.  
Playing Back a Tape  
To remove the cassette, press 0 PUSH OPEN on the unit.  
1 Press 0 PUSH OPEN on the unit.  
To play both sides—Reverse Mode  
You can set the deck to play just one side of a tape, both sides  
once, or both sides continuously.  
PUSH  
OPEN  
0
REV.MODE  
Press REV.MODE.  
• Each time you press the button,  
reverse mode changes as follows:  
REV. MODE  
:
The deck automatically  
stops after playing both  
sides of the tape. Stops  
when playback in the 2  
direction is finished.  
On the unit  
(only for UX-L36V)  
2 Put a cassette in with the exposed part of the  
tape down.  
:
:
The deck continues to play both sides of the  
tape until 7 is pressed.  
The deck automatically stops after playing one  
side of the tape.  
The use of the C-120 or thinner tape is not  
recommended, since characteristic deterioration  
may occur and this tape easily jams in the pinch-  
rollers and the capstans.  
3 Press 0 PUSH OPEN again.  
TAPE  
4 Press TAPE 2 3.  
The unit automatically turns on and the tape  
starts playing. The tape direction indicator  
(3 or 2) flashes slowly on the display.  
• Each time you press the button, the tape  
TAPE  
direction changes.  
3 :  
2 :  
plays the front side.  
plays the reverse side.  
When the tape plays to the end, the deck automatically  
stops if the reverse mode is set to  
play both sides—Reverse Mode.”)  
or  
. (See “To  
If no cassette is inserted  
“NO TAPE” appears on the display.  
– 23 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording  
Continued  
IMPORTANT:  
Recording on a Tape  
• It may be unlawful to record or play back copyrighted  
material without the consent of the copyright owner.  
• The recording level is automatically set correctly, so it is  
not affected by the other sound settings. Thus, during  
recording you can adjust the sound you are actually  
listening to without affecting the recording level.  
• If recordings you have made have excessive noise or static,  
the unit may be too close to a TV. Increase the distance  
between the TV and the unit.  
On the unit ONLY:  
1 Put a recordable cassette in with the exposed  
part of the tape down.  
• You can use type I tape for recording.  
To protect your recording  
Cassettes have two small tabs  
on the back to protect from  
unexpected erasure or re-  
recording.  
To protect your recording,  
remove these tabs.  
To re-record on a protected tape, cover the holes with  
adhesive tape.  
2 Close the cassette holder gently and check the  
recording direction for the tape.  
• If the tape direction is not correct, press TAPE 2 3  
twice then 7 to change the tape direction.  
• If you want to record on both sides of a tape, see “To  
record on both sides—Reverse Mode.”  
To keep the best recording and playback sound quality  
If the heads, capstans, and pinch rollers of the cassette decks  
become dirty, the following will occur:  
• Impaired sound quality  
• Discontinuous sound  
• Fading  
3 Start playing the source—FM, AM or  
auxiliary equipment connected to AUX jacks.  
• When the source is CD, see “CD Direct Recording” on  
page 25.  
• Incomplete erasure  
• Difficulty in recording  
REC  
4 Press REC (recording).  
The REC (recording) indicator lights up on  
the display and recording starts.  
To clean the heads, capstans, and pinch rollers  
Use a cotton swab moistened with alcohol.  
To stop recording, press 7.  
The tape stops after 4 seconds.  
Capstans  
To remove the cassette, press 0 PUSH OPEN on the unit.  
To record on both sides—Reverse Mode  
Press REV.MODE (reverse mode) until  
REV.MODE  
Heads  
the  
indicator is lit.  
Pinch Rollers  
• When using the Reverse Mode for  
recording, start recording in the  
forward (3) direction first.  
Otherwise, recording will stop when  
recording is done only on one side  
(reverse) of the tape.  
REV. MODE  
To demagnetize the heads  
Turn off the unit, and use a head demagnetizer (available at  
electronics and audio shops).  
On the unit  
(only for UX-L36V)  
At the start and end of cassette tapes  
There is leader tape which cannot be recorded onto. Thus, when  
recording CDs or radio broadcasts, wind the leader tape first to  
ensure that the recording will be made without any music part lost.  
– 24 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD Direct Recording  
One Track Recording  
Everything on the CD goes onto the tape in the order it is on  
the CD, or according to the order you have made for Program  
Play.  
This recording method is convenient when you record tracks  
while playing the CD. You can only record your favorite  
songs on the tape.  
On the unit ONLY:  
On the unit ONLY:  
1 Put a recordable cassette in with the exposed 1 Put a recordable cassette in with the exposed  
part of the tape down.  
part of the tape down.  
2 Load a CD.  
2 Play the track on the CD you wish to record.  
• If the current playing source is not the CD player, press  
CD 3/8, then 7 before going to the next step.  
— If you do not want pauses of about 4 seconds  
recorded between selections, press CD 3/8 twice.  
Otherwise, non-recorded pause will be  
REC  
3 Press REC (recording).  
The CD player returns to the beginning of  
that track and the track is recorded on the  
tape.  
automatically recorded between selections.  
• If you want to record on both sides of a tape, see “To  
record on both sides—Reverse Mode.”  
After recording, the CD player and cassette deck  
automatically stop.  
4 Repeat steps 2 and 3 to record other tracks  
REC  
3 Press REC (recording).  
you want.  
The REC (recording) indicator lights up on  
the display and recording starts.  
To stop while recording, press 7.  
After recording, the CD player and cassette deck  
automatically stop.  
The tape stops after 4 seconds.  
To remove the cassette, press 0 PUSH OPEN on the unit.  
To stop while recording, press 7.  
The tape stops after 4 seconds.  
To remove the cassette, press 0 PUSH OPEN on the unit.  
To record on both sides—Reverse Mode  
Press REV.MODE (reverse mode) until  
REV.MODE  
the  
indicator is lit.  
• When using the Reverse Mode for CD  
Direct Recording, start recording in  
the forward (3) direction first. When  
the tape reaches its end while  
REV. MODE  
recording a song in the forward  
direction (3), the last song will be re-  
recorded at the beginning of the  
reverse side (2).  
On the unit  
(only for UX-L36V)  
If you start recording on the reverse  
side (2), recording will stop when recording is done only  
on one side (reverse) of the tape.  
When making Sleep Timer settings while doing CD  
Direct recording  
Set enough time to allow for the CD to finish playing; otherwise the  
power will go off before recording is completed.  
– 25 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Microphone and Multiplex CDs  
By plugging in the microphone, you can use the System for  
Karaoke or microphone mixing. You can also add an echo to  
the microphone’s sound.  
• After you have finished singing along, always cancel the Karaoke  
mode. Karaoke mode will also be cancelled if you change  
functions or turn off the power.  
• If “howling” occurs, keep the microphone away from the  
speakers.  
• When digital recording is made to the external equipment through  
the OPTICAL DIGITAL OUT terminal using an audio CD, the  
microphone sound is not recorded.  
Karaoke and microphone mixing are only available  
when CD source is selected  
• The VOLUME control adjusts the microphone volume when CD  
source is selected  
• When you will not be using the microphone, keep the VOLUME  
control set to MIN and disconnect the microphone.  
• During recording, you cannot change theVocal Masking.  
Always set the VOLUME control to MIN when  
connecting or disconnecting the microphone.  
Applying an echo to your voice  
You can apply echo to your voice through the microphone  
during CD mode only.  
Singing Along — Karaoke  
Press the DIGITAL ECHO button on the Remote Control  
until “ECHO ON” appears on the display.  
Pressing the button alternates between echo ON and OFF.  
“ECHO ON” and “ECHO OFF” will appear on the display  
for 3 seconds.  
You can enjoy singing along using audio CDs and video CDs  
(Karaoke does not function for other sources such as tapes).  
While singing along, you can apply echo.  
DIGITAL  
ECHO  
Singing Along with Audio CDs — Vocal Masking  
When playing an audio CD, you can reduce the lead vocal  
and replace it with your voice by singing into the  
microphone.  
ECHO ON  
ECHO OFF  
The following CDs are not suitable for Vocal Masking.  
• Monoaural CDs  
• Multiplex Karaoke CDs  
• CD recorded duets, strong echo, a chorus, or only a few  
instruments  
To cancel the echo, press the DIGITAL ECHO button again  
until “ECHO OFF” appears on the display. Turning off the  
power will cancel the echo.  
1 Set the VOLUME control to MIN by turning  
During recording, you cannot switch the echo.  
it anti-clockwise.  
2 Connect the microphone by plugging it into  
Always set the VOLUME control to MIN when  
connecting or disconnecting the microphone.  
the MIC jack.  
3 Press the KARAOKE button on the Remote  
Control until “V.MASK” appears on the  
display.  
Microphone Mixing  
Each time you press the button, the “V.MASK” and  
“NORMAL” appears on the display alternately as shown  
below:  
Using a microphone, you can mix the microphone sound with  
a CD sound.  
NORMAL  
V.MASK  
(KARAOKE OFF)  
(KARAOKE ON)  
Microphone mixing is only available for CD source.  
4 Play a CD.  
5 Adjust the main volume and the VOLUME  
control, as you sing into the microphone.  
• If you want to record on a tape, carry out CD Direct  
Recording or One Track Recording. (See page 25)  
1 Set VOLUME control to MIN by turning it  
fully anti-clockwise.  
2 Connect a microphone (not supplied) by  
plugging it into the MIC jack.  
3 Start the source: CD Only.  
To cancel the Karaoke mode, press the KARAOKE button  
on the Remote Control until “NORMAL” appears on the  
display.  
– 26 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Multiplex CDs and Singing Along  
with Multiplex (MPX) Karaoke CDs  
Microphone mixing is not available for other sources such as Tape,  
Tuner or Aux.  
If the source you are going to play is a multiplex CD, you can  
use the Multiplex Sound function.  
What is Multiplex Sound?  
4 Adjust the main volume and the VOLUME  
In a multiplex Karaoke CD, the instrumental parts are  
recorded on the left channel and the vocal parts are recorded  
on the right channel. With this system, you can select the  
playback sound with your voice through the microphone  
(With this system, you can select each channel separately).  
control as you sing into the microphone.  
• To apply echo, press the DIGITAL ECHO button on the  
Remote Control until “ECHO ON” appears on the display.  
To cancel the echo, press the same button again. “ECHO  
OFF” will appear on the display. Turning off the power will  
cancel the echo.  
1 Turn on the TV and select the video input on  
the TV.  
2 Set the VOLUME control to MIN by turning  
If “howling” occurs, keep the microphone away from the speakers.  
it anti-clockwise.  
3 Connect a microphone (not supplied) by  
To Record Microphone Mixing on a Tape  
plugging it into the MIC jack.  
1 Follow the above steps 1-4.  
4 Press the DIGITAL ECHO or MPX button  
on the remote control to select the MPX or  
Echo mode you want to use.  
2 To record, follow the steps in “Recording on a  
Each time you press the button, MPX and Echo mode  
changes as follows.  
Tape”. (See page 24)  
RCH MONO  
ECHO OFF  
MPX: LCH MONO  
STEREO  
When digital recording is made to external equipment through the  
OPTICAL DIGITAL OUT terminal using an audio CD, the  
microphone sound is not recorded.  
ECHO:  
ECHO ON  
Lch MONO: Only the left channel (instrumental parts)  
are played through both speakers.  
Rch MONO: Only the right channel (vocal parts) are  
played through both speakers.  
STEREO:  
Normal stereo mode.  
• You can also select MPX and Echo mode during  
playback.  
• MPX status is not indicate on the display.  
• To return to Normal stereo mode press the MPX  
button on the remote control until “STEREO”  
appear on the display.  
5 Play a multiplex CD.  
To play a video CD with PBC, see page 20.  
6 Adjust the main volume and the VOLUME  
control as you sing into the microphone.  
• If you want to record on a tape, carry out CD Direct  
Recording or One Track Recording. (See page 25)  
– 27 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Timers  
Continued  
There are three timers available—Daily Timer, Recording  
Timer and Sleep Timer.  
Before using the timers, you need to set the clock built in the  
unit (see page 9).  
2 Set the on-time when you want the unit to  
turn on.  
1) Press UP or DOWN to set the hour, then press  
CLOCK/TIMER.  
2) Press UP or DOWN to set the minute, then press  
CLOCK/TIMER.  
The unit enters off-time setting mode.  
Using Daily Timer and Recording Timer  
DOWN  
UP  
NEXT  
You can set the timer whether the unit is on or off.  
PREV  
UP  
DOWN  
When the on-time comes, the unit automatically turns on  
(
(timer) indicator flashes just before the on-time, and  
continues flashing while the timer is operating). Then, when  
the off-time comes, the unit automatically turns off (on  
standby).  
CLOCK  
/TIMER  
CLOCK/TIMER  
The timer setting remains in memory until you change it.  
• When the DAILY indicator is lit on the display, the timer  
acts as the Daily Timer. Once the Daily Timer has been set,  
it will be activated at the same time everyday until the timer  
is turned off.  
[
]
DAILY  
• When the REC indicator is lit on the display, the timer acts  
as the Recording Timer. After the Recording Timer has  
been performed, the details of the setting remain stored but  
the timer is turned off.  
3 Set the off-time when you want the unit to  
turn off (on standby).  
1) Press UP or DOWN to set the hour, then press  
CLOCK/TIMER.  
2) Press UP or DOWN to set the minute, then press  
CLOCK/TIMER.  
Before you start...  
When using “ TUNER” as the source to play, make sure to  
select the desired station before turning off the power.  
The unit enters source selecting mode.  
DOWN  
PREV  
UP  
NEXT  
UP  
• There is a time limit in doing the following steps. If the  
setting is canceled before you finish, start from step 1  
again.  
DOWN  
CLOCK  
1 Press CLOCK/TIMER.  
/TIMER  
CLOCK  
/TIMER  
CLOCK/TIMER  
(timer) indicator lights up, and the timer  
mode indicator (DAILY or REC) and the  
current on-time flash on the display.  
CLOCK/TIMER  
The unit enters on-time setting mode.  
4 Press UP or DOWN to select the timer mode  
(Daily Timer or Recording Timer) and the  
source to play, then press CLOCK/TIMER.  
[
]
DAILY  
DOWN  
UP  
PREV  
NEXT  
UP  
DOWN  
CLOCK  
/TIMER  
CLOCK/TIMER  
– 28 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Sleep Timer  
• Each time you press these buttons, the timer mode and  
the source change as follows:  
With Sleep Timer, you can fall asleep to music.  
You can set Sleep Timer when the unit is turned on.  
DAILY  
REC  
TUNER  
DAILY TAPE  
TUNER  
DAILY  
CD  
How Sleep Timer actually works  
The unit automatically turns off after the specified time  
length passes.  
DAILY TUNER : tunes in to the last station you were  
listening to. (Daily Timer)  
REC TUNER : records the last station you were listening  
to. (Recording Timer)  
On the remote control ONLY:  
• Put a recordable cassette into the deck.  
DAILY CD : plays a CD. (Daily Timer)  
• Load a CD.  
DAILY TAPE : plays a tape. (Daily Timer)  
• Make sure that the tape direction is correct.  
SLEEP  
1 Press SLEEP.  
The time length until the shut-off time appears  
and the SLEEP indicator lights up on the  
display.  
• Each time you press the button, the time length changes  
as follows:  
5 Press UP or DOWN to set the volume level,  
then press CLOCK/TIMER.  
SLEEP 10  
SLEEP 20  
SLEEP 30  
SLEEP 60  
SLEEP 90  
• You can select the volume level (“VOLUME – –” and  
“VOLUME 0” to “VOLUME 40”).  
If you select “VOLUME – –,” the volume is set to the  
last level when the unit has been turned off.  
Canceled  
SLEEP120  
• To turn off the volume while the Recording Timer  
(
“VOLUME 0.”  
2 Wait for about 5 seconds after specifying the  
REC TUNER) is working, set the volume level  
time length.  
The unit enters the clock setting mode.  
DOWN  
UP  
To check the remaining time until the shut-off time, press  
SLEEP once so that the remaining time until the shut-off time  
appears for about 5 seconds.  
PREV  
NEXT  
UP  
DOWN  
To change the shut-off time, press SLEEP repeatedly until  
the desired time length appears on the display.  
CLOCK  
/TIMER  
CLOCK/TIMER  
To cancel the setting, press SLEEP repeatedly until the  
SLEEP indicator goes off.  
• Sleep Timer is also canceled when you turn off the unit.  
6 Adjust the clock.  
• See “Setting the Clock” on page 9.  
STANDBY/ON  
7 Press STANDBY/ON  
to  
• If you set the Sleep Timer after Daily Timer starts playing the  
selected source  
Daily Timer is canceled.  
• If you set the Sleep Timer after Recording Timer starts  
recording  
Recording Timer is canceled, but recording continues until Sleep  
Timer shuts off the power.  
turn off the unit (on standby) if  
you have set the timer with the  
unit turned on.  
STANDBY / ON  
• When the timer turns on the unit,  
(timer) indicator and the selected timer  
mode indicator (DAILY or REC) start  
flashing.  
To cancel the setting, press and hold CLOCK/TIMER until  
(timer) indicator goes off from the display.  
• If the unit is turned on when the timer-on time comes  
Timer does not work.  
• When you unplug the AC power cord or if a power failure  
occurs  
The timer will be canceled. You need to set the clock first, then  
the timer again.  
– 29 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance  
To get the best performance of the unit, keep your discs, tapes, and mechanism clean.  
Handling discs  
Cleaning the unit  
• Remove the disc from its case by  
holding it at the edge while pressing  
the center hole lightly.  
• Do not touch the shiny surface of the  
disc, or bend the disc.  
• Stains on the unit  
Should be wiped off with a soft cloth. If the unit is heavily  
stained, wipe it with a cloth soaked in water-diluted neutral  
detergent and wrung well, then wipe clean with a dry cloth.  
• Since the unit may deteriorate in quality, become  
damaged or get its paint peeled off, be careful about the  
followings.  
• Put the disc back in its case after use  
to prevent warping.  
— DO NOT wipe it with a hard cloth.  
— DO NOT wipe it strong.  
— DO NOT wipe it with thinner or benzine.  
— DO NOT apply any volatile substance such as  
insecticides to it.  
• Be careful not to scratch the surface of  
the disc when placing it back in its  
case.  
• Avoid exposure to direct sunlight,  
temperature extremes, and moisture.  
— DO NOT allow any rubber or plastic to remain in  
contact with it for a long time.  
To clean the disc  
Wipe the disc with a soft cloth in a  
straight line from center to edge.  
DO NOT use any solvent—such as conventional record  
cleaner, spray, thinner, or benzine—to clean the disc.  
Handling cassette tapes  
• If the tape is loose in its cassette, take  
up the slack by inserting a pencil in  
one of the reels and rotating.  
• If the tape is loose, it may get  
stretched, cut, or caught in the  
cassette.  
• Be careful not to touch the tape  
surface.  
• Avoid the following places to store the  
tape:  
— In dusty places  
— In direct sunlight or heat  
— In moist areas  
— On a TV or speaker  
— Near a magnet  
– 30 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
If you are having a problem with your unit, check this list for a possible solution before calling for service.  
If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person,  
such as your dealer, for service.  
Symptom  
No sound is heard.  
Cause  
Action  
• Connections are incorrect or loose.  
• Check all connections and make  
corrections. (See pages 6 to 8.)  
• Disconnect the headphones.  
• Headphones are connected.  
• Antennas are disconnected.  
Hard to listen to broadcasts because of  
noise.  
• Reconnect the antennas correctly and  
securely.  
• The AM loop antenna is too close to the  
unit.  
• Change the position and direction of the  
AM loop antenna.  
• The FM antenna is not properly extended  
and positioned.  
• Extend the FM antenna at the best  
position.  
The disc tray does not open or close.  
The disc does not play.  
The AC power cord is not plugged in.  
The disc is placed upside down.  
The disc is scratched or dirty.  
Plug the AC power cord.  
Place the disc with the label side up.  
Clean or replace the disc. (See page 30.)  
Turn on the unit.  
The disc sound is discontinuous.  
The cassette holder cannot be opened.  
Power supply from the AC power cord has  
been cut off while the tape was running.  
Impossible to record.  
Small tabs on the back of the cassette are  
removed.  
Cover the holes with adhesive tape.  
Operations are disabled.  
The built-in microprocessor may  
malfunction due to external electrical  
interference.  
Unplug the AC power cord and then plug it  
back in.  
Unable to operate the unit from the remote  
control.  
• The path between the remote control and  
the remote sensor on the unit is blocked.  
• The batteries are exhausted.  
• Remove the obstruction.  
• Replace the batteries.  
– 31 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Design and specifications are  
subject to change without notice.  
Specifications  
UX-L46V (CA-UXL46V and SP-UXL46V)  
UX-L36V (CA-UXL36V and SP-UXL36V)  
Amplifier  
Output Power:  
Amplifier  
Output Power:  
120 W (60 W + 60 W) at 6 Ω (MAX.)  
100 W (50 W + 50 W) at 6 Ω (10% THD)  
Audio input sensitivity/Impedance (at 1 kHz)  
120 W (60 W + 60 W) at 6 Ω (MAX.)  
100 W (50 W + 50 W) at 6 Ω (10% THD)  
Audio input sensitivity/Impedance (at 1 kHz)  
AUX:  
400 mV/48 kΩ  
AUX:  
400 mV/48 kΩ  
Digital output—OPTICAL DIGITAL OUT  
Signal wave length:660 nm  
Digital output—OPTICAL DIGITAL OUT  
Signal wave length:660 nm  
Output level:  
–21 dBm to –15 dBm  
Output level:  
–21 dBm to –15 dBm  
Speakers/Impedance:  
6 Ω – 16 Ω  
Speakers/Impedance:  
6 Ω – 16 Ω  
Tuner  
FM tuning range:  
AM tuning range:  
Tuner  
FM tuning range:  
AM tuning range:  
87.50 MHz – 108.00 MHz  
87.50 MHz – 108.00 MHz  
At 9 kHz intervals: 531 kHz – 1 710 kHz  
At 10 kHz intervals:530 kHz – 1 710 kHz  
At 9 kHz intervals: 531 kHz – 1 710 kHz  
At 10 kHz intervals:530 kHz – 1 710 kHz  
CD player  
Dynamic range:  
CD player  
Dynamic range:  
85 dB  
85 dB  
Signal-to-noise ratio:  
Wow and flutter:  
90 dB  
Immeasurable  
Signal-to-noise ratio:  
Wow and flutter:  
90 dB  
Immeasurable  
Cassette deck  
Frequency response:  
Cassette deck  
Frequency response:  
Normal (type I): 60 Hz – 14 000 Hz  
Wow and flutter: 0.15% (WRMS)  
Normal (type I): 60 Hz – 14 000 Hz  
Wow and flutter: 0.15% (WRMS)  
General  
Power requirement:  
General  
Power requirement:  
AC 110 V/ 127 V/ 220 V/ 230 V – 240 V , adjustable with  
the voltage selector, 50 Hz/60 Hz  
AC 110 V/ 127 V/ 220 V/ 230 V – 240 V , adjustable with  
the voltage selector, 50 Hz/60 Hz  
Power consumption:  
110 W (at operation)  
7.5 W (on standby)  
Power consumption:  
110 W (at operation)  
7.5 W (on standby)  
Dimensions (approx.):  
520 mm x 320 mm x 319.2 mm (W/H/D)  
Mass (approx.): 12.7 kg  
Dimensions (approx.):  
490 mm x 285 mm x 319.2 mm (W/H/D)  
Mass (approx.): 12.7 kg  
Supplied Accessories  
Supplied Accessories  
See page 6.  
See page 6.  
Speaker  
Speaker  
Speaker units:  
Woofer:  
Tweeter:  
Main speaker:  
10.0 cm cone x 2  
4.0 cm cone x 1  
6 Ω  
Speaker units:  
Woofer:  
Tweeter:  
Main speaker:  
12.0 cm cone x 1  
4.0 cm cone x 1  
6 Ω  
Impedance:  
Impedance:  
Dimensions (approx.):  
175 mm x 320 mm x 229 mm (W/H/D)  
Mass (approx.): 3.0 kg each  
Dimensions (approx.):  
160 mm x 285 mm x 186.5 mm (W/H/D)  
Mass (approx.): 2.4 kg each  
– 32 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Mains (AC) Line Instruction (not applicable for Europe, U.S.A., Canada, Australia, and  
U.K.)  
IMPORTANT for mains (AC) line  
BEFORE PLUGGING IN, do check that your mains (AC)  
line voltage corresponds with the position of the voltage  
selector switch provided on the outside of this equipment  
and, if different, reset the voltage selector switch, to  
prevent from a damage or risk of fire/electric shock.  
VOLTAGE  
SELECTOR  
230V  
-240V  
220V  
127V  
110V  
VOLTAGE  
SELECTOR  
SPEAKERS  
RIGHT  
LEFT  
230V  
-240V  
127V  
220V  
110V  
SPEAKER  
IMPEDANCE  
MIN  
6
0602AOKFLEJEM  
EN, CH, TH  
VICTOR COMPANY OF JAPAN, LIMITED  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Oven K6C32 G User Manual
Indesit Washer Dryer WIDXE 146 User Manual
JVC Camcorder Accessories GY HM150U User Manual
JVC DVD Player XV N210B User Manual
Kalorik Blender USK BL 16910 User Manual
Kenmore Gas Grill 4151610711 User Manual
Kenwood CD Player CD RECEIVER User Manual
Klipsch Speaker KL 6502 THX User Manual
Kodak Printer Accessories E 2411 User Manual
Kolcraft Stroller S084 12 10 User Manual