COMPACT COMPONENT SYSTEM
–Consists of CA-FSH100 and SP-FSH100
FS-H100
For Customer Use:
INSTRUCTIONS
Enter below the Model No. and Serial No.
which are located either on the rear, bot-
tom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
LVT1190-001B
[J]
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Introduction ....................................................................... 2
Location of the Buttons and Controls ............................. 3
Main Unit .................................................................................. 3
Remote Control ......................................................................... 5
Getting Started .................................................................. 6
Unpacking ................................................................................. 6
Putting the Batteries into the Remote Control .......................... 6
Connections ............................................................................... 6
Connecting Other Equipment .................................................... 7
Basic and Common Operations ....................................... 8
Setting the Clock ....................................................................... 8
Turning On the Power ............................................................... 8
Selecting the Source .................................................................. 9
Adjusting the Volume ................................................................ 9
Fade Muting .............................................................................. 9
Selecting the Sound Modes ....................................................... 9
Adjusting the Tone (Bass/Treble) .............................................. 9
Listening to FM and AM Broadcasts............................. 10
Tuning in to a Station .............................................................. 10
Presetting Stations ................................................................... 10
Tuning in to a Preset Station ................................................... 11
Playing Back Discs .......................................................... 12
Playing Back the Entire Disc—Normal Play .......................... 12
Basic Disc Operations ............................................................. 13
Programming the Track Playing Order—Program Play.......... 13
Repeating Tracks—Repeat Play .............................................. 14
Playing at Random—Random Play......................................... 14
Displaying the Remaining Time during Playback................... 14
Playing Back Tapes.......................................................... 15
Playing Back a Tape ................................................................ 15
Using an External Equipment ........................................ 16
Listening to the External Equipment ....................................... 16
Recording ......................................................................... 17
Recording on a Tape ................................................................ 17
Recording Discs—Disc Synchronized Recording .................. 18
Using the Timers.............................................................. 19
Using the Daily Timer ............................................................. 19
Using the Sleep Timer ............................................................. 20
Maintenance..................................................................... 21
Troubleshooting ............................................................... 22
Specifications ................................................................... 23
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
We would like to thank you for purchasing one of our JVC products.
Before operating this unit, read this manual carefully and thoroughly to
obtain the best possible performance from your unit, and retain this manual
for future reference.
Power sources
• When unplugging the unit from the wall outlet, always pull
on the plug, not the AC power cord.
About This Manual
This manual is organized as follows:
• This manual mainly explains operations using the
buttons on the remote control.
You can use the buttons both on the remote control and
on the unit for the same operations if they have the
same or similar names (or marks), unless mentioned
otherwise.
• Basic and common information that is the same for many
functions is grouped in one place, and is not repeated for
each procedure. For instance, we do not repeat the
information about turning on/off the unit, setting the
volume, changing the sound effects, and others, which are
explained in the section “Basic and Common Operations”
on pages 8 and 9.
DO NOT handle the AC power cord with wet
hands.
Moisture condensation
Moisture may condense on the lenses inside the unit in the
following cases:
• After starting to heat the room.
• In a damp room.
• If the unit is brought directly from a cold to a warm place.
Should this occur, the unit may malfunction. In this case,
leave the unit turned on for a few hours until the moisture
evaporates, unplug the AC power cord, then plug it in again.
• The following symbols are used in this manual:
Others
Gives you warning and caution to prevent
damage or risk of fire/electric shock.
• Should any metallic object or liquid fall into the unit,
unplug the AC power cord and consult your dealer before
operating any further.
• If you are not going to operate the unit for an extended
period of time, unplug the AC power cord from the wall
outlet.
In addition, we put information here about
conditions which will prevent getting the best
possible performance from the unit.
Gives you information and hints you need to
know.
DO NOT disassemble the unit since there are no
user serviceable parts inside.
If anything goes wrong, unplug the AC power cord and
consult your dealer.
Precautions
Installation
• Install in a place which is level, dry and neither too hot nor
too cold—between 5˚C (41˚F) and 35˚C (95˚F).
• Install the unit in a location with adequate ventilation to
prevent internal heat buildup.
• Leave sufficient distance between the unit and the TV.
• Keep the speakers away from the TV to avoid interference
with TV.
DO NOT install the unit in a location near heat
sources, or in a place subject to direct sunlight,
excessive dust or vibration.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Location of the Buttons and Controls
Continued
Become familiar with the buttons and controls on your unit.
Main Unit
Top view
1
COMPACT
DIGITAL AUDIO
OPEN
2
Front view
p
q
3
COMPACT
DIGITAL AUDIO
4
STANDBY
VOLUME
5
–
+
CD
TAPE
FM/AM
AUX
6
#/8
PHONES
DOWN
4
UP
¢
AUX
7
TIMER
7
8
9
w
e
FS–H100
COMPACT COMPONENT SYSTEM
r
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Location of the Buttons and Controls (continued)
Display window
1 2
3
4
5 6 7
8
9 p
MP
3
1
2
3
ALL RANDOM MONOST
REC
SLEEP
PRGM SOUND
q
See pages in parentheses for details.
Main unit
Display window
1 Disc cover (12)
2 0 OPEN (disc cover open) (12)
3 Remote sensor (5)
1 SLEEP indicator
2 (timer) indicator
3 Timer number indicator
4 MP3 indicator
4 STANDBY lamp (8)
5
(STANDBY/ON) button (8, 19)
5 Repeat indicators
6 Source buttons
•
, ALL
• CD #¥8, TAPE, FM/AM, AUX
Pressing one of these buttons also turns on the unit.
7 PHONES jack (9)
8 MULTI CONTROL buttons
• DOWN 4, 7, UP ¢
6 PRGM (program) indicator
7 RANDOM indicator
8 FM mode indicators
• MONO, ST (stereo)
9 REC indicator
9 Cassette holder (15)
p Display window
p SOUND indicator
q Main display
q VOLUME control (9)
w AUX jack (7, 17)
e TIMER button (20)
r Tape operation buttons (15, 17)
• ‡ (recording), # (play), ! (fast backward),
⁄ (fast forward), &/) (stop/cassette holder open),
* (pause)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
See pages in parentheses for details.
1 Number buttons (10, 11, 13)
2 Multi control buttons
• PRESET UP, PRESET DOWN
• 4, 7, ¢
3 Source buttons
STANDBY/ON
SLEEP
• CD #¥8, TAPE, FM/AM, AUX
Pressing one of these buttons also turns on the unit.
4 REPEAT button (14)
5 PLAY MODE button (10, 13, 14)
6 SOUND button (9)
7 BASS/TREBLE button (9)
8 STANDBY/ON
9 SLEEP button (20)
p CLOCK/TIMER button (8, 19)
q DISPLAY button (8)
w REMAIN button (14)
e SET button (8, 19)
r CANCEL button (20)
t FM MODE button (10)
y VOLUME + / – buttons (9)
u FADE MUTING button (9)
1
4
3
2
5
8
9
p
6
9
1
CLOCK/
TIMER
7
8
REMAIN
10
+10
DISPLAY
SET
button (8, 19)
q
w
PRESET UP
e
r
2
3
CANCEL
PRESET DOWN
CD3/8
TAPE
FM/AM
AUX
PLAY
MODE
FM
MODE
REPEAT
t
4
5
VOLUME
y
u
BASS/
FADE
SOUND TREBLE MUTING
6
7
RM-SFSH100J REMOTE CONTROL
COMPACT
DIGITAL AUDIO
STANDBY
VOLUME
–
+
M/AM
AUX
UP
¢
AUX
TIMER
When using the remote control, point it at the
remote sensor on the front panel.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Unpacking
Connections
After unpacking, check to be sure that you have all the
following items.
To connect speakers
You can connect the speakers using the speaker cords.
The number in parentheses indicates the quantity of each
piece supplied.
• AM loop antenna (1)
• Remote control (1)
1
2,3
• Batteries (2)
If any item is missing, consult your dealer immediately.
Putting the Batteries into the Remote Control
Insert the batteries—R6(SUM-3)/AA(15F)—into the remote
control by matching the polarity (+ and –) on the batteries
with the + and – marking on the battery compartment.
When the remote control can no longer operate the unit,
replace both batteries at the same time.
Gray
LEFT
RIGHT
Gray
Gray with
black stripe
Speaker
cord
Speaker
cord
1
Gray with
black stripe
R6(SUM-3)/AA(15F)
2
Right speaker
Left speaker
1 Hold the clamp of the speaker terminal.
2 Insert the end of the speaker cord into the
terminal.
Match the polarity of the speaker terminals: gray cord
(ª) to red (ª) and gray cord with black stripe (·) to
black (·).
3
3 Release your finger from the clamp.
IMPORTANT:
• Use only speakers with the same speaker impedance as
indicated by the speaker terminals on the rear of the unit.
• DO NOT connect more than one speaker to one
speaker terminal.
• DO NOT use an old battery together with a new
one.
• DO NOT use different types of batteries together.
• DO NOT expose batteries to heat or flame.
• DO NOT leave the batteries in the battery
compartment when you are not going to use the
remote control for an extended period of time.
Otherwise, the remote control will be damaged
from battery leakage.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
To connect AM and FM antennas
Connecting Other Equipment
To connect audio equipment
You can connect audio equipment—used only as a playback
device.
AM loop antenna
(supplied)
1
• DO NOT connect any equipment while the
power is on.
• DO NOT plug in any equipment until all
connections are complete.
For playing other equipment through this unit,
connect between the audio output jacks on the other
equipment and AUX jacks by using audio cords with mini
plugs (not supplied).
ANTENNA
AM
LOOP
FM
ANTENNA
2
FM antenna
To audio output
AUX
L
R
1 Connect the supplied AM loop antenna to the
AM LOOP terminal.
To
Audio equipment
Place the antenna away from the unit and adjust its
position for the best reception.
To audio output
2 Adjust the position for the FM antenna for
When the audio equipment has pin jacks for audio output:
Be sure that the pin plugs of the audio cords are colored—
white plugs and jacks are for left audio signals, and red ones
for right audio signals.
the best reception.
For better reception of both FM and AM
• Make sure the antenna conductors do not touch any other
terminals or connecting cords.
• Keep the antennas away from metallic parts of the unit,
connecting cords, and the AC power cord.
NOW you are ready to plug in the unit.
IMPORTANT:
Be sure to check that all connections have been made
before plugging in the power cord.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic and Common Operations
To show the clock when the unit is turned on
Setting the Clock
On the remote control ONLY:
Before operating the unit any further, first set the unit’s clock.
When you plug in the power cord, “AM12:00” starts flashing
on the display.
You can set the clock when the unit is either turned on or in
standby mode.
DISPLAY
Press DISPLAY.
• Each time you press the button, the display
changes the clock indication and the normal
indication alternately.
On the remote control ONLY:
To adjust the clock
CLOCK/
TIMER
1 Press CLOCK/TIMER.
On the remote control ONLY:
The hour indication starts flashing.
CLOCK/
TIMER
1 Press CLOCK/TIMER repeatedly to
show the current time indication.
SET
2 Press SET.
The hour indication starts flashing.
2 Press 4 or ¢ to adjust the
hour, then press SET.
3 Press 4 or ¢ to adjust
the hour, then press SET.
• When you press and hold 4 or
¢, the hour indication changes
continuously.
The minute indication starts flashing.
4 Press 4 or ¢ to adjust the
The minute indication starts flashing.
SET
minute, then press SET.
SET
The built-in clock starts.
Turning On the Power
3 Press 4 or ¢ to adjust the
minute, then press SET.
• When you press and hold 4 or
¢, the minute indication changes
continuously.
To turn on the unit, press STANDBY/ON
The STANDBY lamp on the unit goes off.
• When you press the source button—CD 3/8,
TAPE, FM/AM and AUX, the unit
automatically turns on.
.
STANDBY/ON
The built-in clock starts.
SET
To turn off the unit (standby), press STANDBY/ON
again.
The STANDBY lamp on the unit lights red.
• “AM12:00” flashes on the display until you set the built-in
clock. After setting the clock, the clock time will appear on
the display while the unit is on standby.
• A little power is always consumed even while the unit is in
standby mode.
• When you unplug the AC power cord or if a power failure
occurs
The clock is reset to “AM12:00” right away. If this happens, set
the clock again.
To switch off the power supply completely, unplug the AC
power cord from the AC outlet.
• The clock may gain or lose 1 to 2 minutes per month
If this happens, reset the clock.
When you unplug the AC power cord or if a power
failure occurs
The clock is reset to “AM12:00” right away and “AM12:00” starts
flashing on the display when plugging the power cord again.
If this happens, set the clock again.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Source
Selecting the Sound Modes
To select the source, press CD 6, TAPE, FM/AM, or
AUX.
• When you select CD as the source, playback starts
automatically.
You can select one of the 4 sound modes.
• This function also affects the sound from headphones.
• This function only affects the playback sound, and does not
affect your recording.
To operate the tuner (FM or AM), see pages 10 and 11.
To operate the CD player, see pages 12 to 14.
To operate the tape deck, see page 15.
To record on a tape, see pages 17 and 18.
To use an external equipment, see page 16.
On the remote control ONLY:
SOUND
To select the sound modes, press SOUND
repeatedly.
• Each time you press the button, the sound mode
changes as follows:
ROCK
POP
CLASSIC
JAZZ
Adjusting the Volume
OFF
You can adjust the volume level only while the unit is turned
on. The volume level can be adjusted between “VOL MIN,”
“VOL 01” – “VOL 30,” and “VOL MAX.”
ROCK:
POP:
Powerful sound emphasizing treble and bass.
More presence in the vocals and midrange.
CLASSIC: Enriched sound with fine treble and ample bass.
• The volume level has no effect on recording.
JAZZ:
OFF:
Accented lower frequencies for jazz-type music.
Equalizer effect is canceled.
VOLUME
To increase the volume, press VOLUME + (or
turn VOLUME control clockwise on the unit).
To decrease the volume, press VOLUME – (or
turn VOLUME control counterclockwise on the unit).
• When you press and hold either button, you can change the
volume level continuously.
SOUND
When the sound mode is activated, the SOUND indicator
lights up on the display.
Adjusting the Tone (Bass/Treble)
You can adjust the bass level (low frequency range) and the
treble level (high frequency range) within a range of –1 to +4.
When shipped, the bass level set to “BASS 0” and the treble
level set to “TREBLE 0.”
For private listening
Connect a pair of headphones to the PHONES jack. No sound
comes out of the speakers. Be sure to turn down the volume before
connecting or putting on the headphones.
• This function only affects the playback sound, and does not
affect your recording.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start over from step 1.
DO NOT turn off (standby) the unit with the volume
set to an extremely high level; Otherwise, the
sudden blast of sound can damage your hearing,
speakers and/or headphones when you turn on the
unit or start playing any source.
On the remote control ONLY:
BASS/
TREBLE
1 Press BASS/TREBLE once to adjust
the bass level or press BASS/
TREBLE twice to adjust the treble
level.
REMEMBER you cannot adjust the volume level
while the unit is in standby mode.
PRESET UP
2 Press PRESET UP to increase the
level or press PRESET DOWN to
Fade Muting
decrease it.
PRESET DOWN
On the remote control ONLY:
FADE
MUTING
Press FADE MUTING.
The volume level decreases to “VOL MIN,” and
“MUTING” starts flashing on the display.
• You cannot use the tone adjustment function and the sound mode
function at the same time. (The sound mode changes automatically
into “OFF” when pressing BASS/TREBLE.)
• The bass/treble setting automatically returns to “0” when you
select one of the sound modes (see “Selecting the Sound Modes”
above).
To release muting, press FADE MUTING again. The
volume level resumes to the previous level.
• Adjusting the volume level also cancels the muting.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to FM and AM Broadcasts
On the remote control ONLY:
Tuning in to a Station
1 Tune in to the station you want to preset.
FM/AM
1 Press FM/AM to select either “FM”
or “AM.”
• See “Tuning in to a Station” on the left column.
PLAY
MODE
2 Press PLAY MODE.
The preset number starts flashing on the
display.
The unit automatically turns on and tunes in to
the previously received station—either FM or AM.
• Each time you press the button, the band alternates
between FM and AM.
• The PRGM (program) indicator lights up on the
display.
PRGM
2 Press and hold ¢ or 4 (or
UP ¢ or DOWN 4 on the
unit) for more than 1 second.
3 Press ¢ or 4 to select a
preset number.
• ¢ (UP ¢):
Increases the frequencies.
• 4 (DOWN 4): Decreases the frequencies.
PRGM
The unit starts searching for stations and stops when a
station of sufficient signal strength is tuned in.
• If an FM program is broadcast in stereo, the ST (stereo)
indicator lights up on the display (only when the
reception is good).
1
4
3
6
9
2
You can also use the number button(s)
to select a preset number.
Ex.: To select a preset number 5,
press 5.
5
8
7
To stop during searching, press ¢ or 4 (or UP ¢ or
DOWN 4 on the unit).
To select a preset number 15,
press +10, then 5.
10
+10
To select a preset number 20,
press +10, then 10.
To select a preset number 30, press
+10, +10, then 10.
When you repeatedly press ¢ or 4 (or UP ¢ or
DOWN 4 on the unit)
The frequency changes step by step.
PLAY
MODE
4 Press PLAY MODE again.
To change the FM reception mode
On the remote control ONLY:
5 To preset more stations, repeat steps 1 to 4
When an FM stereo broadcast is hard to receive or noisy,
press FM MODE so that the MONO indicator lights up on
the display. Reception will improve.
above, allocating a different preset number to
each station.
• Storing a new station on an already assigned number
erases the previously stored one.
To restore the stereo effect, press FM MODE again so that
the MONO indicator goes off. In stereo mode, you can hear
stereo sound when a stereo program is broadcast.
When you unplug the AC power cord or if a power
failure occurs
The preset stations will remain in the unit.
Presetting Stations
You can preset 30 FM and 15 AM stations manually.
In some cases, test frequencies have been already stored
for the tuner since the factory examined the tuner preset
function before shipment. This is not a malfunction. You
can preset the stations you want into memory by following
the presetting method.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start again from step 2.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning in to a Preset Station
On the remote control ONLY:
FM/AM
1 Press FM/AM to select either “FM”
or “AM.”
The unit automatically turns on and tunes in to
the previously received station—either FM or AM.
• Each time you press the button, the band alternates
between FM and AM.
PRESET UP
2 Press PRESET UP or
PRESET DOWN repeatedly to
select a preset number.
PRESET DOWN
To tune in to a preset station directly using the number
buttons
On the remote control ONLY:
Pressing the number button(s) allows you to select the preset
number you want.
1
3
6
9
2
Ex.: For preset number 5, press 5.
For preset number 15, press +10, then
5.
For preset number 20, press +10, then
4
5
7
8
10.
10
+10
For preset number 30, press +10, +10,
then 10.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Back Discs
This unit has been designed to play back the following
discs—CD, CD-R, and CD-RW.
You can play back the discs containing the tracks in music
CD format or MP3 files in ISO 9660 format.
• In this instruction, we call a disc recorded MP3 files “MP3
disc,” and “file” is also referred to as “track.”
2 Place a disc correctly
with its label side up,
then press down on the
portions around the
disc’s center hole until
you hear a click.
When playing CD-Rs or CD-RWs
• Before playing CD-Rs or CD-RWs, read their instructions
or cautions carefully.
• User-edited CD-Rs (CD-Recordable) and CD-RWs (CD-
ReWritable) can be played only if they are already
“finalized.”
• This unit supports “multi-session” discs (up to 5 sessions).
• This unit cannot play “packet write” discs.
• Some CD-Rs or CD-RWs may not play on this unit because
of their disc characteristics, damage or stain on them, or if
the player’s lens is dirty.
3 Close the disc cover gently.
4 Press CD 6.
CD3/8
The unit automatically turns on and the source
changes to the CD player.
After loading the disc, the first track of the disc starts
playing.
When playing audio CD
When playing MP3 disc
Current track number
MP3 indicator
• CD-RWs may require a longer readout time. This is
because the reflectance of CD-RWs is lower than for
regular discs.
MP
3
Notes for MP3 files
Current track Elapsed
number
playing time
Elapsed playing
time
• The player can only recognize files with “MP3” or “mp3”
as the extensions, which can be in any combination of
upper and lower case.
• The disc automatically stops when the last track has
finished playing.
• This unit recognizes up to 500 MP3 files on a disc.
• It is recommended that you record your material at a 44.1
kHz sampling rate, using the 128 kbps data transfer rate.
• Some MP3 files or discs may not be played back because
of their characteristics or recording conditions.
• MP3 discs requires a longer readout time than normal discs
because of the complexity of the folder/file configuration.
• ID 3 Tag is not available.
To stop playing, press 7.
The total track number and total playing time
appear on the display.
When stop playing
audio CD
When stop playing
MP3 disc
MP
3
• MP3i and MP3 Pro are not available.
General notes
Total track Total playing
Total track number
number
time
In general, you will have the best performance by keeping
your discs and the mechanism clean.
• Store discs in their cases, and keep them in cabinets or on
shelves.
• Total playing time does not appear when MP3 disc is
loaded.
• Keep the unit’s disc trays closed when not in use.
• Continued use of irregular shape discs (heart-shape,
octagonal, etc.) can damage the unit.
To remove the disc, press 0 OPEN on the unit, then take out
the disc by holding it at the edges while pressing the unit’s
pivot lightly.
• If the disc cannot be read correctly (because it is scratched,
for example) or an unreadable CD-R or CD-RW is inserted
Playback will not start.
Playing Back the Entire Disc—Normal Play
• If no disc is inserted
“NO DISC” appears on the display.
1 Press 0 OPEN on the unit.
The disc cover opens.
• You can insert a disc while listening to another source.
DO NOT try to open the disc cover by hand as it
will be damaged.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
Basic Disc Operations
PLAY
MODE
2 Press PLAY MODE.
The PRGM (program) indicator appears on the
display.
While playing a disc, you can do the following operations.
To stop playing for a moment
During play, press CD 3/8.
PRGM
CD3/8
While pausing, the elapsed playing time flashes on
the display.
3 Press ¢ or 4 to select the
track number, then press
PLAY MODE.
To resume playing, press CD 3/8 again.
To go to another track
Track number Program step number
Before or during play, press ¢ or 4
(or UP ¢ or DOWN 4 on the unit)
repeatedly.
PLAY
MODE
PRGM
• ¢ (UP ¢):
Skips to the beginning of the next or
succeeding tracks.
• 4 (DOWN 4): Goes back to the beginning of the
1
4
3
6
9
2
5
You can also use the number button(s)
to select a track number.
• For the operation of the number
buttons, see “To go to another track
directly using the number buttons”
on the left column.
current or previous tracks.
7
8
To go to another track directly using the number
buttons
10
+10
1
3
6
9
2
On the remote control ONLY:
4 Repeat step 3 to program other tracks you
4
5
Pressing the number button(s) before or
during play allows you to start playing the
track number you want.
want.
7
8
CD3/8
5 Press CD 3/8.
Ex.: For track number 5, press 5.
For track number 15, press +10, then
5.
10
+10
The tracks are played in the order you have
programed.
For track number 20, press +10, then 10.
For track number 32, press +10, +10, +10, then 2.
If you try to program a 33rd track
“FULL” will appear on the display.
To locate a particular point in a track
During play, press and hold ¢ or 4
(or UP ¢ or DOWN 4 on the unit).
To stop playing, press 7.
Playback stops and the play mode returns to Normal
Play.
• ¢ (UP ¢):
• 4 (DOWN 4): Fast-reverses the tracks.
Fast-forwards the tracks.
Programming the Track Playing Order
—Program Play
To check the program contents
PLAY
You can check the program contents by pressing
MODE
You can arrange the order in which tracks play before you
start playing. You can program up to 32 tracks.
PLAY MODE repeatedly before or after playback.
On the remote control ONLY:
1 Place a disc.
• If the current source is not the CD player, press
CD 6, then 7 before going to the next step.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Back Discs (continued)
To modify the program
Playing at Random—Random Play
PLAY
MODE
Press PLAY MODE repeatedly until the program
step number you want to modify appears. Then
follow steps 3 and 4 of the programming procedure.
You can play the tracks at random.
On the remote control ONLY:
To add tracks in the program, press PLAY MODE
repeatedly until “00” appears as the track number. Then
follow steps 3 and 4 of the programming procedure.
PLAY
MODE
Press PLAY MODE during playing.
The RANDOM indicator lights up on the display.
RANDOM
To clear the program
Press PLAY MODE, then press 7 before or after
PLAY
MODE
playback.
The PRGM indicator disappears from the display.
• The programmed tracks are also erased in the
following cases:
– When pressing 0 OPEN to open the disc cover.
– When turning off the unit.
PLAY
To exit from Random Play, press PLAY MODE
again.
The RANDOM indicator goes off.
MODE
• It is not possible to activate the Random Play function
during Program Play.
– When changing the source.
Displaying the Remaining Time during
Playback
Repeating Tracks—Repeat Play
You can have all the tracks, the program or individual track
currently playing, repeat as many times as you like.
You can display the remaining time of the current track/disc
and the elapsed time of the current track/disc during playing.
On the remote control ONLY:
REPEAT
On the remote control ONLY:
Press REPEAT repeatedly before or
during playback.
• Each time you press the button, Repeat Play changes as
follows, and the following repeat indicator lights up on the
display:
REMAIN
Press REMAIN repeatedly.
• Each time you press the button, the display
changes as follows:
Remaining time of
the current track
*Remaining time of
the disc
ALL
Canceled
Repeat indicators
ALL
Current track number
Remaining tracks number
Elapsed time of the current track
(normal indication)
:
Repeats one track.
* Remaining time of the disc will not be displayed in the
following cases:
– During MP3 playback.
ALL: In Normal Play, repeats all the tracks.
In Program Play, repeats all the tracks in the
program.
– During Random Play.
– During Program Play.
REPEAT
To cancel Repeat Play, press REPEAT repeatedly
until the repeat indicator goes off.
• Repeat Play is canceled when you select another
play mode (Normal, Program, or Random Play).
• In Random Play, Repeat Play cannot be selected.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Back Tapes
For tape operations, use buttons on the unit.
TAPE
4 Press TAPE.
The unit automatically turns on and the
source changes to the tape deck.
• You can select to the tape by pressing
TAPE on the remote control.
Playing Back a Tape
You can play back type I tapes only.
On the unit ONLY:
5 Press # (play).
The tape starts playing.
• When the end of the tape is reached,
playing stops.
1 Press &/) (stop/cassette holder open).
The cassette holder opens.
To stop playing, press &/).
To stop playing for a moment, press *.
To resume playing, press * again.
2 Put a cassette in with the exposed part of the
To fast forward or rewind the tape, press ⁄
or !.
tape down.
• The fast forwarding or rewinding stops at the
end of the tape.
To remove the cassette, press &/) while
playback is stopped.
• DO NOT turn off the unit while playing back or
recording a tape. The cassette deck or tapes
may be damaged.
3 Close the cassette holder gently.
• The use of C-120 or longer tape is not
recommended, since characteristic deterioration
may occur and this tape easily jams in the pinch
rollers and the capstans.
• This unit is not compatible with type II and type
IV tapes.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Using an External Equipment
Listening to the External Equipment
You can listen to the external equipment such as MD
recorder, cassette deck, or other auxiliary.
• First, make sure that the external equipment is properly
connected to the unit. (See page 7.)
1 Set the volume level to the minimum position.
2 Press AUX.
“AUX” appears on the display.
3 Start playing the external equipment.
4 Adjust the volume level to the level you want
to listen to.
To exit AUX mode, select other source.
For operation of the external equipment
Refer to its instructions.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Continued
IMPORTANT:
Recording on a Tape
• It should be noted that it may be unlawful to re-record
pre-recorded tapes, records, or discs without the
consent of the owner of copyright in the sound or video
recording, broadcast or cable program and in any
literary, dramatic, musical, or artistic embodied
therein.
On the unit ONLY:
1 Put a recordable cassette in with the exposed
part of the tape down.
• The recording level is automatically set correctly, so it is
not affected by the other sound settings. Thus, during
recording you can adjust the sound you are actually
listening to without affecting the recording level.
• If recordings you have made have excessive noise or static,
the unit may be too close to a TV. Increase the distance
between the TV and the unit.
• See also page 15.
2 Close the cassette holder gently.
3 Start playing the source–FM, AM, or
auxiliary equipment connected to AUX jack.
• When the source is FM or AM, tune in to the station
you want to record.
• You can only use type I tape for recording.
• When recording from discs, see “Recording Discs—
Disc Synchronized Recording” on page 18.
• DO NOT turn off the unit while playing back or
recording a tape. The cassette deck or tapes
may be damaged.
• DO NOT use type II and type IV tapes since the
unit is not compatible with such tapes.
• The use of C-120 or longer tape is not
recommended, since characteristic deterioration
may occur and this tape easily jams in the pinch
rollers and the capstans.
4 Press ‡ (recording).
‡ and # lock down, and the recording starts.
• REC indicator is shown on the display
during recording.
You cannot press ‡ (recording) in the following cases:
• If no cassette is inserted.
• If a protected tape is inserted.
At the start and end of cassette tapes
There is leader tape which cannot be recorded onto. Thus, when
recording from discs, FM/AM broadcasts, or external equipment,
wind the leader tape first to ensure that the recording will be made
without losing any music.
To stop recording for a moment, press *.
To resume recording, press * again.
To protect your recordings
Cassettes have two small tabs on the back to protect against
unexpected erasure or re-recording.
To stop recording, press &/).
To protect your recording, remove these tabs.
To re-record on a protected tape, cover the holes with
adhesive tape.
To remove the cassette, press &/) while recording is
stopped.
Adhesive tape
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording (continued)
Recording Discs
—Disc Synchronized Recording
You cannot press ‡ (recording) in the following cases:
• If no cassette is inserted.
You can start disc play and recording at the same time.
• If a protected cassette is inserted.
On the unit ONLY:
To stop recording for a moment, press *.
The recording is paused, but the CD playback
does not stop.
1 Put a recordable cassette in with the exposed
part of the tape down.
To resume recording, press * again.
• See also page 15.
To stop recording, press &/).
The recording stops and the CD playback is
paused.
2 Close the cassette holder gently.
CD
3 Press CD 3/8 to select the CD
player as the source.
To remove the cassette, press &/) while
recording is stopped.
#/8
7
4 Press 7 to stop the disc playback.
5 Press ‡ (recording).
The REC indicator appears on the display and
the CD starts playback automatically and the
recording starts.
REC
• When the end of the tape is reached, recording stops and
the CD player is paused.
• If you press ‡ (recording) while playing back the CD, the
CD player returns to the beginning of that track and the
track is recorded on the tape.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Timers
Continued
Daily Timer and Sleep Timer are available.
• Before using these timers, make sure the built-in clock is
set correctly (see page 8).
SET
3 Press SET to set the on-time you want
the unit to turn on.
The hour indication starts flashing on the
display.
Using the Daily Timer
1
You can store three Daily timer settings and use one of
settings at once.
How the Daily Timer actually works
(1) Press ¢ or 4 to set the hour, then
press SET.
(2) Press ¢ or 4 to set the minute, then
press SET.
SET
When the on-time comes, the unit automatically turns on and
automatically turns off (standby) after 60 minutes.
• Once the timer has been set, it will be activated at the same
time everyday until the timer is turned off and the timer
setting remains in memory until you change it.
If you want to change the time setting, press
CANCEL.
4 Press ¢ or 4 to select the
Before you start...
source to play.
When using “TUNER” as the source to play, make sure to
select the desired station before turning off the power.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start again from step 2.
1
On the remote control ONLY:
Each time you press the button, the source changes as
follows:
STANDBY/ON
1 Press STANDBY/ON
to turn on
TUNER
CD
AUX
the unit.
When selecting AUX, prepare the external equipment so
that it will turn on at the on time set-on the unit.
To allow this, the equipment should have the timer
function.
If you want to change the time setting, press CANCEL
repeatedly to return Step 3.
2 Press CLOCK/TIMER repeatedly to
select the Daily Timer you want to
adjust and activate– Daily 1, Daily 2,
Daily 3.
CLOCK/
TIMER
Each time you press the button, the display changes as
SET
5 Press SET.
follows:
1
The Daily Timer number remain lit. The
display return to the normal indication.
Daily 1 Timer
VOLUME
6 Press VOLUME +/– to adjust the
volume.
2
Daily 2 Timer
STANDBY/ON
7 Press STANDBY/ON
to turn off
the unit.
3
Daily 3 Timer
Present time indication
Normal indication
If you does not need to change the on-time setting, go to
step 3.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Timers (continued)
To deactivate the timer temporarily,
CLOCK/
(1) Press CLOCK/TIMER repeatedly to select the
TIMER
Using the Sleep Timer
Timer Number indicator to cancel.
The on-time appears and the Timer Number
indicator begins to blink.
With the Sleep Timer, you can fall asleep to your favorite
music or radio program.
• You can set the Sleep Timer only when the unit is turned
on.
CANCEL
(2) Press CANCEL.
The Timer Number indicator disappears and the
display returns to the normal indication.
• You can deactivate the Daily Timer by pressing TIMER on
the unit repeatedly until the (timer) indicator goes off.
How the Sleep Timer actually works
The unit automatically turns off after the specified length of
time passes.
On the remote control ONLY:
To activate and change the timer, repeat steps 1 to 7 on
page 19.
SLEEP
1 Press SLEEP.
The SLEEP indicator blinks on the display.
• To activate the timer again without changing the setting,
press TIMER on the unit repeatedly to select the timer
number you want. The timer is activated and the timer
number stops flashing after displaying the source and time
setting on the display for a few seconds.
SLEEP
• Each time you press the button, the length of time
changes as follows:
If the unit is already turned on when the timer on-time
comes
The timer does not work.
10
20
30
60
120
90
Normal indication
(canceled)
When you unplug the AC power cord or if a power
failure occurs
2 Wait for about 5 seconds after specifying the
length of time.
The timer setting remains. Set the built-in clock and activate the
timer again.
The SLEEP indicator remains lit on the display.
To check the remaining time until shut-off time, press
SLEEP once. The remaining time until shut-off time appeears
for about 5 seconds.
To change the shut-off time, press SLEEP repeatedly until
the length of time you want appears.
To cancel the setting, press SLEEP repeatedly until the
SLEEP indicator goes off and display returns to the normal
indication.
• Turning off the unit also cancels the Sleep Timer.
When you set the Sleep Timer after the Daily Timer
starts playing the selected source
The unit follows the Sleep Timer setting.
If you set the Sleep Timer while playing back or
recording a tape
Do not shut the unit off with the Sleep Timer while a tape is running.
If the unit turns off while playing back or recording a tape, the
cassette deck or tapes may be damaged.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
To get the best performance of the unit, keep your discs, tapes and mechanism clean.
General Notes
Handling cassette tapes
In general, you will have the best performance by keeping
your discs, tapes and the mechanism clean.
• Store discs and tapes in their cases, and keep them in
cabinets or on shelves.
• If the tape is loose in its cassette, take up the
slack by inserting a pencil in one of the reels
and rotating.
• If the tape is loose, it may get stretched, cut,
or caught in the cassette.
Cleaning the unit
• Stains on the unit
• Be careful not to touch the tape surface.
Should be wiped off with a soft cloth. If the unit is heavily
stained, wipe it with a cloth soaked in water-diluted neutral
detergent and wrung well, then wipe clean with a dry cloth.
• Since the unit may deteriorate in quality, become
damaged or have its paint peel off, be careful about the
following:
– DO NOT wipe it with a rough cloth.
– DO NOT wipe it too vigorously.
– DO NOT wipe it with thinner or benzine.
– DO NOT apply any volatile substance such as an
insecticide to it.
• Avoid storing tapes in any of the following
places:
– In dusty places
– In direct sunlight or heat
– In moist areas
– On a TV or speaker
– Near a magnet
– DO NOT allow any rubber or plastic to remain in contact
with it for a long time.
To keep the best recording and playback sound quality
You need to clean the heads.
• Clean the heads after every 10 hours of use with
a wet-type head cleaning tape (available at electronic and
audio shops).
When the head becomes dirty, the following symptoms will
occur:
Handling discs
• Remove the disc from its case by
holding it at the edge while pressing
the center hole lightly.
• Do not touch the shiny surface of the
disc, or bend the disc.
– Sound quality is reduced.
– Sound level decreases.
– Sound drops out.
• Put the disc back in its case after use
to prevent warping.
• Do not play dirty or dusty tapes.
• Do not touch the highly-polished head with any metallic or
magnetic tools.
• Be careful not to scratch the surface
of the disc when placing it back in
its case.
Capstan
• Avoid exposure to direct sunlight,
temperature extremes, and moisture.
Head
Pinch Roller
To clean the disc
Wipe the disc with a soft cloth in a
straight line from center to edge.
To demagnetize the head
Turn off the unit, and use a head demagnetizer (available at
electronic and audio shops).
DO NOT use any solvent—such as conventional
record cleaner, spray, thinner, or benzine—to clean
the disc.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If you are having a problem with your unit, check this list for a possible solution before calling for service.
If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person,
such as your dealer, for service.
Symptom
Possible Cause
Action
Power does not come on.
The power cord is not connected to an
AC outlet.
Insert the plug into the socket.
No sound is heard.
• Connections are incorrect or loose.
• Check all connections and make
corrections. (See pages 6 and 7.)
• Unplug the headphones from the
PHONES jack.
• A pair of headphones is connected.
• MP3 disc is recorded with “packet
writing.”
• It cannot be played. Replace the disc.
Hard to listen to broadcasts because of
noise.
• Antennas are disconnected.
• Reconnect the antenna correctly and
securely.
• The AM loop antenna is too close to
the unit.
• Change the position and direction of
the AM loop antenna.
• The FM antenna is not properly
extended and positioned.
• Extend FM antenna and orient to the
best reception position.
The disc does not play.
The disc is upside down.
Put the disc in with the label side up.
Specific files (tracks) on an MP3 disc are Files other than MP3 are included in the They cannot be played.
not played.
disc.
Impossible to record.
Small tabs on the back of the cassette are Cover the holes with adhesive tape.
removed.
Operations are disabled.
The built-in microprocessor has
Unplug the AC power cord then plug it
malfunctioned due to external electrical back in.
interference.
Unable to operate the unit by the remote • The path between the remote control
• Remove the obstruction.
control.
and the remote sensor on the unit is
blocked.
• The batteries are exhausted.
• You are using the remote control too
far from the unit.
• Replace the batteries. (See page 6.)
• Signals cannot reach the remote
sensor. Move closer to the unit.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Design and specifications are subject to change without notice.
Specifications
Amplifier Section—CA-FSH100
Output Power:
12.5 W per channel, min. RMS, driven into 6 Ω at 1
kHz with no more than 10% total harmonic distortion.
Speakers/Impedance:
6 Ω – 16 Ω
Tuner
FM tuning range:
AM tuning range:
87.5 MHz—108.0 MHz
530 kHz—1 710 kHz
CD player
Dynamic range:
Signal-to-noise ratio:
Wow and flutter:
85 dB
85 dB
Immeasurable
Cassette deck
Frequency response:
Normal (type I):
Wow and flutter:
100 Hz—10 000 Hz
0.35 % (WRMS)
General
Power requirement:
Power consumption:
AC 120 V , 60 Hz
38 W (at operation)
2 W (on standby)
Dimensions (W/H/D) (approx.):
144 mm x 255 mm x 277 mm
(5 11/16 in. x 10 1/16 in. x 10 15/16 in.)
2.9 kg (6.4 lbs)
Mass (approx.):
Supplied accessories
See page 6.
Speaker Section—SP-FSH100
Type:
Speakers:
Full range bass-reflex type
10 cm cone x1
Power handling capacity: 12.5 W
Impedance:
Frequency range:
6 Ω
100 Hz to 15 kHz
Dimensions (W/H/D) (approx.):
130 mm x 257 mm x 151 mm
(5 1/8 in. x 10 1/8 in. x 6 in.)
1.5 kg (3.3 lbs) each
Mass (approx.):
23
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
AUDIO-1
JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE
ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date
of original retail purchase for the period as shown below. ("The Warranty Period")
PARTS
LABOR
1
YR
1
YR
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND
IN COMMONWEALTH OF PUERTO RICO.
WHAT WE WILL DO:
If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner.
Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service
centers. Parts used for replacement are warranted only for the remainder of the Warranty Period. All products and parts
thereof may be brought to a JVC authorized service center on a carry-in basis except for Television sets having a screen
size 25 inches and above which are covered on an in-home basis.
WHAT YOU MUST DO FOR WARRANTY SERVICE:
Return your product to a JVC authorized service center with a copy of your bill of sale. For your nearest JVC authorized
service center, please call toll free: (800) 537-5722.
If service is not available locally, box the product carefully, preferably in the original carton, and ship, insured, with
a copy of your bill of sale plus a letter of explanation of the problem to the nearest JVC Factory Service Center, the
name and location of which will be given to you by the toll-free number.
If you have any questions concerning your JVC Product, please contact our Customer Relations Department.
WHAT IS NOT COVERED:
This limited warranty provided by JVC does not cover:
1. Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty
installation, lack of reasonable care, or if repaired or serviced by anyone other than a service facility authorized by
JVC to render such service, or if affixed to any attachment not provided with the products, or if the model number
or serial number has been altered, tampered with, defaced or removed;
2. Initial installation and installation and removal for repair;
3. Operational adjustments covered in the Owner's Manual, normal maintenance, video and audio head cleaning;
4. Damage that occurs in shipment, due to act of God, and cosmetic damage;
5. Signal reception problems and failures due to line power surge;
6. Video Pick-up Tubes/CCD Image Sensor, Cartridge, Stylus (Needle) are covered for 90 days from the date of purchase;
7. Accessories
8. Batteries (except that Rechargeable Batteries are covered for 90 days from the date of purchase);
There are no express warranties except as listed above.
THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY, IS
LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.
JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER
DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, WITHOUT LIMITATION, DAMAGE
TO TAPES, RECORDS OR DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH
OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANT-
ABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an
implied warranty lasts, so these limitations or exclusions may not apply to you. This warranty gives you specific
legal rights and you may also have other rights which vary from state to state.
JVC COMPANY OF AMERICA
DIVISION OF JVC AMERICAS CORP.
1700 Valley Road
Wayne, NJ 07470
REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY, THIS WARRANTY DOES NOT APPLY. FOR DETAILS OF
REFURBISHED PRODUCT WARRANTY, PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY INFORMATION
PACKAGED WITH EACH REFURBISHED PRODUCT.
For customer use:
Enter below the Model No. which is located either on the rear, bottom or side of the cabinet. Retain this information
for future reference.
Model No. :
Serial No. :
Purchase data :
Name of dealer :
Download from Www.Somanuals.com. All Manuals Search And Download.
Authorized Service Centers
®
QUALITY
SERVICE
HOW TO LOCATE YOUR JVC SERVICE CENTER
TOLL FREE: 1 (800) 537-5722
Dear Customer,
In order to receive the most satisfaction from your purchase,please read the instruction booklet before
operating the unit.In the event that repairs are necessary, please call 1 (800)537-5722 for your nearest
authorized servicer or visit our website at www.JVC.com
Remember to retain your Bill of Sale for Warranty Service.
Do not service the television yourself
Caution
To prevent electrical shock,do not open the cabinet.There are no user serviceable
parts inside.Please refer to qualified service personnel for repairs.
Accessories
To purchase accessories for your JVC product,please call toll free:1 (800)882-2345 or
on the web at www.JVC.com
BT-51001-5
(0301)
Download from Www.Somanuals.com. All Manuals Search And Download.
VICTOR COMPANY OF JAPAN, LIMITED
EN
0204AIMMDWBET
© 2004 VICTOR COMPANY OF JAPAN, LIMITED
Download from Www.Somanuals.com. All Manuals Search And Download.
|