KH 2323
ꢀ Hand Steam Cleaner
Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
ᕡ
ᕢ
ᕣ
ᕥ
ᕤ
ᕦ
Ƹ
ᕧ
ᕨ
¹
¸
µ
¾
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Intended Use
This device is intended for household use
for the removal of dirt and stains using
steam, for example ...
3. Device Description and
Accessories
ᕡ Boiler
ᕢ Lid
• smooth surfaces: work surfaces, tiles,
ᕣ Steam switch
ᕤ Indicator light
ᕥ Connection nozzle
stove tiles, windows, mirrors
• hard-to-reach areas: corners, joints,
louvers, WC, fittings, etc.
ᕦ Window attachment: For cleaning and
• textiles: curtains, pillows, clothing, car
seats.
ꢀ
stripping of glass and mirrors.
ᕧ Surface nozzle: For smooth surfaces,
pillows, textiles.
This device is not intended:
• for use outdoors
ᕨ Textile cover: For surface nozzle, for
wiping smooth surfaces.
• for use with liquids other than water
ᕩ Measuring cup (160 ml): For measur-
• for use in commercial or industrial envi-
ronments.
ing the maximum filling amount.
µ Filling funnel: For filling the boiler
cleanly with water.
2.Technical Data
Power supply : .........230 V / 50 Hz
¸ Angle nozzle: For turning the stream of
steam, e.g. upward or to reach covered
areas. You can connect the angle
Power consumption : .900 W
nozzle either directly to the boiler in
front or via the extension element.
Water boiler :............410 ml
Steam pressure :......max. 4,3 bar
Steam output : .........approx. 40g/min.
Weight : ....................approx. 1.55 kg
Dimensions (mm) :.....approx. 290x140x210
¹ Round brush: For scrubbing firmly
caked dirt. You can connect the round
brush either directly to the boiler in front
or via the extension element.
Ƹ Point stream nozzle: For cleaning of
hard-to-reach areas. You can also use
the point stream nozzle as an exten-
sion element by connecting the round
brush or angle nozzle to the front of the
point stream nozzle.
Keep these instructions for reference and include them
when passing the device on to another party!
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4. Safety Instructions
To avoid life-threatening electric shocks:
To prevent fire hazards and the risk of
injury:
• Make certain that the power cord
does not become wet or moist during
operation. Run it such that it cannot be
crushed or damaged.
• Never direct the steam toward people
or animals. Hot, high pressure steam
can cause serious injuries!
• Caution - heat! High temperatures
should be expected at the steam exit
and lid threads during operation and
up to 30 minutes approx. after unplug-
ging the power card. Do not touch
these areas until they have cooled
down completely.
• If the power cord or the power plug
are damaged, have these replaced by
the customer service before continuing
to use the device.
ꢀ
• First pull the plug out of the power
socket before filling the device with
water or changing acccessory parts.
• Only fill the device with clear water –
never use other liquids or any additives!
These can react in unexpected ways
under pressure and heat!
• Only use the device in dry rooms, not
outdoors.
• Only fill the device with the supplied
measuring cup! Never hold it under
running water. Never submerge the
device in water.
•
Risk of scalding!
Never open the lid while pressure exists
within the boiler (e.g. if hissing can still be
heard when pressing the steam switch).
Otherwise, hot steam can escape rapidly
upon opening!
• Never leave a heat-generating device
unattended! After use or during work
pauses, always pull the plug out of the
power socket. The device heats up and
generates steam pressure as long as
the plug is in the power socket!
• Do not operate the device with an
empty tank. If the water reserve is used
up, unplug the power cord to prevent
overheating.
• Only use the device with dry hands
and never without shoes (not bare-
foot). This reduces contact of hot liquid
or steam with the body in the event of
an error.
• Let the accessories cool before
removing them.
• Only use the original accessory parts
for this device. Other parts may not be
sufficiently safe.
• Never let children or elderly persons
work with the device unattended as
they may not always properly appreci-
ate the possible hazards.
• Wear gloves, protective glasses and
breathing protection when attempting
to remove substances hazardous to
health.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5. Operation
First test on a less visible area whether the
material to be cleaned is suitable for high
pressure steam, for instance:
b) Filling and refilling with Water
Warning: Before refill water:
• Let the device cool down, otherwise
there is a risk of scalding.
• Painted wood or leather can be
bleached by steam.
• Unplug the power cord, otherwise there
is a risk of electrical shock.
• Unprotected wood can swell.
• Protective wax coatings can be remo-
Note: The device is equipped with a safety
mechanism that prevents opening of the
lid ᕢ as long as steam is present in the
boiler.
ved by steam.
ꢀ
• Plastics can be melted by steam.
• Soft plastics can deform when ex-
➩ Pull the power plug out of the socket.
posed to steam.
➩ Press the steam switch ᕣ until the
steam has been completely released
from the boiler.
• Cold glass or mirror surfaces can
snap when encountering hot steam. If
you wish to clean windows, you must
first preheat them, for instance by
applying the steam over large areas
from a greater distance, then moving it
progressively closer.
➩ Unscrew the lid ᕢ on top of the boiler
and lift it off.
➩ Use the measuring cup ᕩ and funnel µ
to fill with a maximum of 280 ml of
cold, clear water.
• Acrylic, velvit and linen react sensitive-
ly to hot steam, as do plastic fibres.
Caution: Do not overfill the device.
Excessive pressure can result if too much
water is added. The device could be
damaged!
a) Attaching / Removing Accessories
Warning: Make certain that the power
cord is unplugged before attaching or
removing accessories. Attached accesso-
ries can still be hot after prior operation!
➩ Screw the lid ᕢ closed again by hand
until tight.
➩ Select the accessory appropriate for the
intended cleaning (ᕦ-ᕨ , ¸-Ƹ )
according to the description in Section
3.
c) Allowing the Device to Heat Up
When the boiler is filled with water and the
lid ᕢ is firmly closed:
➩ Place the device on a flat surface that
will not tip and plug the power plug into
the power socket.
➩ Slide the accessory onto the front con-
nection nozzle and turn it 1/4 turn ...
• clockwise to lock it (turn tight),
• counter-clockwise to remove it.
• The red indicator light ᕤ lights up. After
3-4 min. the device is ready for use.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
7. Storage
➩ Let the device cool completely before
d) Cleaning with Steam
putting it away.
Warning: Always hold the device upright
during use – never tip the device at an
angle greater than about 45 degrees (in
any direction). Hot water could drip out
and cause burns.
➩ Empty the tank after you have
finished working with the device.
Bacteria may grow in the water
remaining in the boiler – the bacteria
may be blown into the air during the
next use.
➩ Direct the accessory toward the surface
to be cleaned. ...
ꢀ
➩ Store the device in a dry location.
• First at a distance of about 20 cm.
➩ Store the device in a place that is
inaccessible to children and elderly
persons. They may not properly
appreciate the hazards involved with
devices that generate heat.
➩ Press the steam switch ᕣ, steam now
flows from the nozzle.
➩ You can now move as close to the sur-
face being cleaned as the material per-
mits.
8. Disposal
Care for the environment. If you wish to
dispose of the device, dispose of it at a
collection site for recycling of electronics.
6.Cleaning the Device
Danger: Do not open any part of the
housing. There are no operating elements
inside. An open housing can create the
risk of a life-threatening electrical shock.
9.Warranty & Service
The warranty conditions and the service
Before cleaning the device, ....
➩ First unplug the power cord and ...
address can be found on the enclosed
sheet.
➩ Let the device cool. This can take up
to 30 minutes. approx.. Caution – the
lid threads remain hot for some time,
even after the rest of the device has
already cooled.
Kompernaß GmbH
Burgstr. 21
D-44867 Bochum
➩ Remove deposits from the boiler after
about 10 - 15 uses. To do this, fill the
boiler with clear water as described in
5.b). Then close the lid and shake the
device forcefully.
➩ Clean the outside surfaces and the
power cord with a slightly damp wash
cloth. Always dry the device well before
using it again.
➩ Do not use any cleansers, abrasives or
solvents. These can damage the device.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
UK
Kompernaß GmbH
Burgstraße 21 • D-44867 Bochum
ID: KH2323-0505-V4
Download from Www.Somanuals.com. All Manuals Search And Download.
|