JVC MP3 Player HR XVC1U User Manual

DVD/CD PLAYER  
Hi-Fi STEREO  
VIDEO CASSETTE  
RECORDER  
USER'S GUIDE  
For model:  
HR-XVC1U  
POWER  
TV  
TV VOL  
0
For Customer Use:  
LPT0719-001A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFEGUARDS  
1. READ INSTRUCTIONS  
All the safety and operating instructions should be read before the unit is operated.  
2. RETAIN INSTRUCTIONS  
The safety and operating instructions should be retained for future reference.  
3. HEED WARNINGS  
All warnings on the unit and in the operating instructions should be adhered to.  
4. FOLLOW INSTRUCTIONS  
All operating and use instructions should be followed.  
5. CLEANING  
Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.  
Use a damp cloth for cleaning the exterior cabinet only.  
6. ATTACHMENTS  
The manufacturer of this unit does not make any recommendations for attachments, as they may cause  
hazards.  
7. WATER AND MOISTURE  
Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet  
basement, or near a swimming pool.  
PORTABLE CART WARNING  
(symbol provided by RETAC)  
8. ACCESSORIES  
Do not place this unit on an unstable cart, stand, tripod, bracket, or table.  
The unit may fall, causing serious injury, and serious damage to the unit.  
An appliance and cart combination should be moved with care. Quick stops,  
excessive force, and uneven surfaces may cause the appliance and cart  
combination to overturn.  
9. VENTILATION  
Slots and openings in the cabinet back or bottom are provided for ventilation,  
to ensure reliable operation of the unit, and to protect it from overheating.  
S3125A  
These openings must not be blocked or covered. The openings should never be blocked by placing the unit  
on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat  
source. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper  
ventilation is provided and/or the manufacturer’s instructions have been adhered to.  
10. POWER SOURCES  
This unit should be operated only from the type of power source indicated on the rating plate. If you are not  
sure of the type of power supply to your home, consult your appliance dealer or local power company. For  
units intended to operate from battery power, or other sources, refer to the operating instructions.  
11. GROUNDING OR POLARIZATION  
This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the  
other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert  
the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to  
replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug, if your unit is equipped  
with a 3-wire grounding-type plug, a plug having a third (grounding) pin. This plug will only fit into a ground-  
ing-type power outlet. This too, is a safety feature. If you are unable to insert the plug into the outlet,  
contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-  
type plug.  
12. POWER-CORD PROTECTION  
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed  
upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point  
where they exit from the appliance.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFEGUARDS  
13. LIGHTNING  
To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time,  
unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the  
unit due to lightning and power line surges.  
14. POWER LINES  
An outside antenna system should not be located in the vicinity of overhead power lines or other electric  
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside  
antenna system, extreme care should be taken to keep from touching such power lines or circuits, as  
contact with them might be fatal.  
15. OVERLOADING  
Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.  
16. OBJECT AND LIQUID ENTRY  
Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short  
out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.  
17. OUTDOOR ANTENNA GROUNDING  
If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is  
grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the  
National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast  
and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding  
conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for  
the grounding electrode.  
18. SERVICING  
Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous  
voltage or other hazards. Refer all servicing to qualified service personnel.  
19. DAMAGE REQUIRING SERVICE  
Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following  
conditions:  
a. When the power-supply cord or plug is damaged.  
b. If liquid has been spilled, or objects have fallen into the unit.  
c. If the unit has been exposed to rain or water.  
d. If the unit does not operate normally by following the operating instructions. Adjust only those  
controls that are covered by the operating instructions, as an improper adjustment of other controls  
may result in damage and will often require extensive work by a qualified technician to restore the  
unit to its normal operation.  
e. If the unit has been dropped or the cabinet has been damaged.  
f . When the unit exhibits a distinct change in performance, this indicates a need for service.  
20. REPLACEMENT PARTS  
When replacement parts are required, be sure the service technician uses replacement parts specified by  
the manufacturer or those that have the same characteristics as the original part.  
Unauthorized substitutions may result in fire, electric shock or other hazards.  
21. SAFETY CHECK  
Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to  
determine that the unit is in proper operating condition.  
22. HEAT  
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other  
products (including amplifiers) that produce heat.  
23. DISC TRAY  
Keep your fingers away from the disc tray as it is closing. It may cause serious personal injury.  
24. CONNECTING  
When you connect the product to other equipment, turn off the power and unplug all of the equipment from  
the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's  
manual of the other equipment carefully and follow the instructions when making any connections.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFEGUARDS / Power Source  
25. LASER BEAM  
Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the  
laser beam. It may cause sight damage.  
26. DISC  
Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious  
personal injury and product malfunction.  
27. NOTE TO CATV SYSTEM INSTALLER  
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that  
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be con-  
nected to the grounding system of the building, as close to the point of cable entry as practical.  
EXAMPLE OF ANTENNA GROUNDING AS PER THE  
NATIONAL ELECTRICAL CODE  
ANTENNA LEAD IN WIRE  
ANTENNA  
DISCHARGE UNIT  
GROUND CLAMP  
(NEC SECTION 810-20)  
ELECTRIC SERVICE  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
EQUIPMENT  
GROUND CLAMPS  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
NEC-NATIONAL ELECTRICAL CODE  
S2898A  
CONDENSATION  
Moisture will form in the operating section of the DVD/VCR if the player is brought from cool surroundings into a  
warm room or if the temperature of the room rises suddenly. And when this happens, DVD/VCR's performance  
will be impaired.  
To prevent this, let the DVD/VCR stand in its new surroundings for about an hour before switching it on, or  
make sure that the room temperature rises gradually.  
Condensation may also form during the summer if the DVD/VCR is exposed to the breeze from an air  
conditioner. In such cases, change the location of the DVD/VCR.  
Power Source  
TO USE AC POWER SOURCE  
Use the AC polarized line cord provided for operation on AC. Insert  
AC Outlet  
the AC cord plug into a standard 120V 60Hz polarized AC outlet.  
Wider Hole  
and Blade  
NOTES:  
Never connect the AC line cord plug to other than the specified  
voltage (120V 60Hz). Use the attached power cord only.  
If the polarized AC cord does not fit into a non-polarized AC  
outlet, do not attempt to file or cut the blade. It is the user’s  
responsibility to have an electrician replace the obsolete outlet.  
If you cause a static discharge when touching the unit and the  
unit fails to function, simply unplug the unit from the AC outlet  
and plug it back in. The unit should return to normal operation.  
Polarized AC Cord Plug  
(One blade is wider than the other.)  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features  
DVD/CD Player/Video Cassette Recorder  
DVD/CD player withVideo Cassette Recorder - Unique space saving design combines a DVD/CD player and a Hi-Fi Video  
cassette recorder.The DVD disc has much more capacity, but is the same size as the audio CD disc. Picture quality is higher  
than Super VHS. Audio quality is higher than audio CD. The DVD PLAYER can play back video CDs and audio CDs.  
High Quality Picture - More than 500 lines(VCR mode: 230 lines) of Horizontal Resolution. It exceeds Super VHS (400  
lines) or Laser Disc (430 lines) in resolution.  
VCR Section  
Stereo/SAP Reception - This VCR is designed to receive stereo and separate audio program (SAP) broadcasts where  
available.  
SQPB - Tapes recorded in the S-VHS system can be played back simply on this VCR.  
4 Video Heads - Provides optimal picture quality for special effects playback.  
19µm HEAD - For superior picture quality even in EP mode, 19micron width technology helps to avoid crosstalk and  
boost EP picture quality to near SP levels. With precision technology, ghosts and color beats are virtually eliminated.  
Hi-Fi Stereo Sound - With a frequency response of 20 to 20,000 Hz and a dynamic range of better than 90dB, this  
VCR provides a level of excellence that rivals compact discs.  
Instant Timer Recording (ITR) - Simply by pressing the REC and PLAY buttons, the VCR can be programmed for up  
to 5 hours of recording with an immediate start.  
Skip Search - When the SKIP SEARCH button is pressed during playback, the VCR will automatically search forward  
in 30 seconds increments to a maximum of 3 minutes with each press of the SKIP SEARCH button, and then return to  
normal playback.  
DVD Section  
Compatible with a wide range of DVD audio outputs  
Digital Audio Jack (Optical or Coaxial):  
• When a component with a built-in Dolby Digital decoder is connected, Dolby Digital sound can produce the effect of  
being in a movie theater or a concert hall.  
• Surround standard different from Dolby Digital. This format is already in use in many theaters. By connecting this unit  
to a DTS decoder or an AV amplifier with a built-in DTS decoder, the DTS audio of DVD discs recorded in this format  
can be enjoyed. However, audio will not be output from the analog audio output jacks.  
• The MPEG audio of DVD discs recorded in this format can be enjoyed.  
• The Linear PCM sound of a 48 kHz/16 bit through 96 kHz/20 bit exceeds audio CD sound.  
Surround audio - This DVD equipped with a “SPATIALIZER N-2-2”. It can produce the effect of being in a cinema or a  
concert hall.  
Multi-Language - Since this DVD matches with 124 language-subtitles/-soundtracks, you can enjoy selecting a favorite  
one. (You can not select the language that is not recorded on the disc.)  
Multi-Angle - Pictures of Sports or a Live Concert are recorded with many cameras. When you play such a disc, you  
can change the angles during playback. (If a Multi-Angle is not recorded on the disc, you can not change the angle.)  
Repeat Playback - You can repeat chapter, track, title, sides or material between two selected points.  
Program/Random Playback (CD) - You can play back tracks in programmed or random-selected sequences.  
Zoom - You can zoom in on the selected subject on the screen during playback.  
Video Aspect Ratio - You can change the aspect ratio of the screen for your monitor/television on a suitable disc.  
Parental Control - You can limit the playback of scenes or sounds of adult DVD discs which have a parental level rating.  
* This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents  
and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright  
protection technology must be authorized by Macrovision Corporation or other rights owners and is intended for home  
and other limited viewing uses only unless otherwise authorized by Macrovision Corporation or other rights owners.  
Reverse engineering or disassembly is prohibited.  
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby  
Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories, Inc. All rights reserved.  
*
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.  
*
* Certain audio features of this product manufactured under license from Desper Products,Inc. Spatializer and the circle  
- in - square device are trademarks owned by Desper Products,Inc.  
*
Unauthorized recording of copyrighted television programs, films, video cassettes and other materials may infringe the  
rights of copyright owners and be contrary to copyright laws.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Before using your unit  
Disc Playback operation  
Important safeguards .......................................3  
Power Source...................................................5  
Features ...........................................................6  
Contents ...........................................................7  
Parts and functions ..........................................8  
Display .............................................................9  
Remote control ...............................................10  
Basic connections ..........................................12  
CATV (CABLE TV) connections.....................14  
Playback Connection .....................................16  
Disc ................................................................ 35  
Setting setup language .................................. 36  
Playback procedure ....................................... 37  
Special playback ............................................ 38  
Zooming ......................................................... 39  
Locating Desired Scene ................................. 39  
Repeat playback ............................................ 40  
Program playback (CD).................................. 41  
Random playback (CD).................................. 41  
MP3 Playback ................................................ 42  
Marking Desired Scenes ................................ 43  
Changing soundtrack language ..................... 44  
Subtitles ......................................................... 44  
Changing angles ............................................ 45  
Title selection ................................................. 45  
DVD menu...................................................... 45  
Setting up the VCR section  
Setting the Video Channel ............................. 18  
Setting the language ...................................... 18  
Tuner Setting.................................................. 19  
To ADD/DELETE channels............................. 20  
Noise elimination ............................................ 20  
Auto clock setting ........................................... 21  
Manual clock setting....................................... 23  
Loading and Unloading a Cassette Tape ....... 24  
Advanced Function of DVD section  
Parental control .............................................. 46  
Temporary disabling of rating level by DVD  
disc................................................................. 47  
Setting menu language .................................. 48  
Setting subtitle language................................ 49  
Setting audio soundtrack language................ 50  
Setting surround sound .................................. 50  
Setting the aspect ratio of TV screen ............. 51  
Setting on Screen display .............................. 52  
Status display of Disc ..................................... 52  
Dynamic Range Control ................................. 53  
Language Code List ....................................... 54  
Tape Playback operation  
Cassette tape Playback ................................. 25  
Special playback ............................................ 26  
ZERO RETURN function................................ 27  
Video Index Search system ........................... 27  
Recording  
Recording a TV program ................................ 28  
Instant Timer Recording (ITR)........................ 30  
Timer Recording............................................. 31  
Additional information  
Advanced Function of VCR section  
Problems and troubleshooting ....................... 55  
Video head cleaning....................................... 56  
Specifications ................................................. 57  
HOW TO LOCATE YOUR JVC SERVICE  
CENTER ........................................................ 58  
LIMITED WARRANTY ................................... 59  
Stereo Recording and Playback..................... 33  
Separate Audio Program (SAP) ..................... 33  
Duplicating a video tape................................. 34  
Duplicating a disc material onto a video tape .... 34  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts and functions  
Front  
VCR/DVD mode selector button  
Cassette Loading Slot  
PLAY button  
STOP button  
OPEN/CLOSE button  
Disc tray  
EJECT button  
PLAY STOP  
POWER  
EJECT  
OPEN/CLOSE  
CH  
REW FF  
REC  
DVD  
VCR  
VIDEO (M) L - AUDIO - R  
VCR/DVD  
Remote sensor  
POWER  
button  
DVD indicator  
CHANNEL +/– buttons  
REW (Rewind) button  
REC button  
AUDIO (L/R)/  
VIDEO IN jacks  
VCR indicator  
FF (Fast Forward) button  
Rear  
AC power cord  
DVD OUTPUT  
DIGITAL AUDIO  
AUDIO  
S-VIDEO  
COMPONENT  
OPTICAL  
COAXIAL  
IN  
Y
VIDEO  
L
(
)
ANT.  
RF IN jack  
R
P
B/CB  
L
AUDIO  
OUT  
(
)
TV  
P
R/CR  
R
DVD OPTICAL  
DIGITAL AUDIO  
OUT jack  
RF OUT jack  
CH.  
3
4
3/4 Channel Selector Switch  
DVD COAXIAL DIGITAL  
AUDIO OUT jack  
DVD/VCR common AUDIO (L/R)/VIDEO OUT  
jacks  
DVD AUDIO (L/R) OUT jacks  
DVD S-VIDEO OUT jack  
DVD COMPONENT OUT jacks  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Display  
Display window  
1
2
3
4
11  
5
6
10  
9
8
7
No. Display  
Description  
1
2
3
4
5
6
VCR  
VCR mode  
Playback (lights) / Auto resume (flashes)  
Still picture  
DVD disc is inserted.  
DVD  
CD  
CD is inserted.  
PM  
Display for afternoon (lights out in the morning)  
Clock display (colon[ : ] flashes)  
10 : 00  
01 : 00  
2
Counter display by hour/minute at VCR/DVD / by minute/second at CD  
Track number display for CD  
7
TV channel display for VCR  
CH02  
C036  
L
CATV channel display  
External input display  
8
9
Timer recording display  
Video tape is in the unit  
Track display for CD  
10  
11  
TRK  
REC  
Normal recording display (flashes during Instant Timer Recording - ITR)  
Explanation for On-Screen-Symbol:  
Playback  
Skip chapter to reverse  
direction  
Zoom  
Stop  
Parental level locked  
Parental level unlocked  
Screen size: Normal TV  
Screen size: PAN SCAN  
Screen size: WIDE  
Shows Prohibited act  
Output sound for Video-CD  
Still picture  
Open or Close the tray  
Auto resume  
Frame advanced playback  
Forward slowmotion  
Direction button’s mark  
A-B repeat  
A B  
Fast Forward playback  
Review playback  
Skip chapter to forward  
direction  
Subtitle language  
Soundtrack language  
Angle  
Note:  
Some discs may be displayed wrong or e.g. chapter number, playback time, etc. may not be displayed.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote control  
Page  
18,36  
18  
TV/VCR/DVD switch Switch to operate TV or VCR or DVD  
POWER  
TV  
VCR  
DVD  
POWER  
Power on/off  
DVD MENU  
MARKER  
RETURN  
OPEN/CLOSE  
DISPLAY  
A.TRK  
Display menu of DVD software  
Locating desired scene  
45  
43  
Remove DVD set up menu  
Open or Close the tray  
36,47  
37  
Change the front Display mode  
Digital AUTO TRACKING  
Set Subtitle of a DVD disc  
Reset the counter to 00:00  
Change playback angle of a DVD disc  
27  
26  
OPEN/  
CLOSE  
DVD MENU  
DISPLAY  
MARKER  
A.TRK  
RETURN  
C.RESET  
ANGLE  
ZERO RETURN  
SUB TITLE  
C. RESET  
ANGLE  
44  
SEARCH  
MODE  
SUB TITLE  
27  
SP/EP  
PLAY  
REPEAT  
A-B  
ZOOM  
TITLE  
45  
MODE  
ZERO RETURN  
SEARCH MODE  
SP/EP  
Stop the tape when the counter reaches 00:00 27  
TV  
POWER  
Index for DVD  
39  
28,30  
40,41  
39  
Sets the tape speed for recording  
Select playback mode  
Zoom (DVD/VCD)  
INPUT  
PLAY MODE  
ZOOM  
TV VOL  
TIMER  
TV/VCR  
TITLE  
Select title of a DVD disc  
45  
0
REPEAT A-B  
0-9  
Repeat playback between A and B (DVD/CD) 40  
PLAY  
Direct channel selection of TV  
Input setting  
20,28  
39,41  
46,47  
31,32  
18,29  
10  
STOP  
C
Enter a password  
SKIP  
SKIP  
TIMER  
TV/VCR  
TV POWER  
INPUT  
TV VOL +/–  
REW  
Set the unit to start recording at a preset time  
.
/INDEX  
/INDEX  
Switches between TV and VCR  
ENTER/  
SELECT  
SET  
SET  
Turn the connected TV on or off  
Switch the connected TV to external mode  
Adjust the connected TV’s volume  
10  
SET UP  
MENU  
CANCEL  
10  
C
Rewind/Review playback  
Playback  
25,26,38  
25,37  
PLAY  
FF  
Fast Forward/Forward search playback 25,26,38  
REC  
Recording  
Stop  
28,30,34  
25,37  
VCR/DVD/TV  
STOP  
PAUSE  
Still picture/Recording pause on/off 26,29,34,38  
SKIP  
/
Skip chapter to forward or reverse direction  
Search for the INDEX mark of a tape  
38  
27  
INDEX  
/
JVC TV Remote Control  
This Remote can control some functions (TV  
POWER, NUMBER(0-9), INPUT, TVVOL +/–,  
TV CH +/– and ENTER) of a remote  
controllable JVC TV by slide TV/VCR/DVD  
switch to TV.  
TV/VCR CH +/–  
Select channel of the connected TV or VCR  
10,28,30,34  
/
Cursor buttons  
Setting buttons  
SET –/+  
31,32  
Manual tracking buttons in playback mode  
Cursor buttons - To move Up in the VCR menu  
you press the . To move Down in the VCR  
26  
(The POWER button on the upper right is not  
effective for the TV.)  
/
NOTE:  
menu you press the  
.
It’s not possible to operate a unit not  
equipped with a remote sensor.  
ENTER  
Enter information in the menu  
Select option in the menu  
Display menu of setup  
This Remote can control a JVC TV only.  
When you operate the VCR or DVD, the  
TV/VCR/DVD switch must be slided to  
VCR/DVD again. Otherwise the DVD/  
VCR may not operate properly.  
Since this unit is combined type of DVD  
and VCR, the remote code of DVD is  
individual. So please note that the DVD-  
keys on the RCU of the other JVC  
RECEIVER/TV isnoteffectiveforthisunit.  
SELECT  
SET UP MENU  
CANCEL  
18,19,36,48-52  
32  
Delete Timer program  
Cancel input data in the setting mode 23,31,39,41  
OSD  
Display VCR or DVD operation status  
Switches sound between mono and stereo  
Change sound track language of DVD  
Slowmotion playback  
29,52  
33  
A.MONITOR  
44  
SLOW  
26,38  
26  
SKIP SEARCH  
Skip the unwanted short material of a tape  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote control  
Inserting Batteries  
Open the battery compart-  
ment cover in the direction of  
the arrow.  
Install two "AA" batteries (supplied),  
paying attention to the polarity  
diagram in the battery compartment.  
Replace the compartment  
cover.  
2
3
1
Battery precautions  
The precautions below should be followed when using batteries in this device:  
1.Use only the size and type of batteries specified.  
2.Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment.  
Reversed batteries may cause damage to the device. To avoid a potential short circuit, insert the “–” end first.  
3.Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.  
4.If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from  
possible battery leakage.  
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery  
manufacturer’s directions.)  
Remote control basics  
Press POWER to turn the DVD/VCR on or off.  
Make sure TV/VCR/DVD switch is set to VCR/DVD.  
Tap VCR CH + or VCR CH – to move through the channels one channel at a time.  
The VCR CH +/– and SET +/– are also used to navigate on-screen menu system.  
You can directly access specific channels using Number keys pad.  
• Each press of VCR or DVD, switches the screen between the VCR screen (VCR mode) and the DVD screen  
(DVD mode).  
Operation  
• Aim the remote control at the remote sensor and press control buttons  
to operate.  
• Operate the remote control within 30° angle on either side of the remote  
sensor, up to a distance of Approx. 5 meters.  
Approx. 5 meters  
Change the custom code for remote control  
If you operate this DVD/VCR with another JVC’s VCR simultaneously arranging them side by side, the both  
recorders will react to this remote control. In this case, you can change the remote control and DVD/VCR to other  
frequency (“ ”). Then you can operate only this DVD/VCR with this changed remote control.  
When you purchased, the DVD/VCR and remote control have been set to the frequency-“ ”.  
Example: Change frequency to  
DVD/VCR:  
Remote control:  
WhileholdingVCR,  
press 2(code: b) of  
Number keys. (in  
case of code: A,  
press 1)  
In the POWER off mode,  
press and hold PLAY for  
more than 5 seconds. “b”  
will appear on the display  
and then disappear after  
approx. 4 seconds.  
PLAY STOP  
OPEN/CLOSE  
REW FF  
REC  
DVD  
NOTES:  
If the remote control has been set to b, the DVD/VCR also must be set to b. Otherwise, the DVD/VCR can not be  
operated with this remote control.  
To reset to “A”, repeat above procedure. However press 1 instead of 2.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic connections  
If you are using an antenna system, follow these instructions. If you are a cable (CATV) subscriber,skip  
ahead to page 14 for the proper connections.  
ANTENNA TO DVD/VCR CONNECTION  
The DVD/VCR must be connected "between" the antenna and the TV. First, disconnect the antenna from the TV  
and connect it to the DVD/VCR.Then connect the DVD/VCR to theTV.Below are 3 common methods of connecting  
an antenna system to a DVD/VCR. Find the type of antenna system you are using and follow the connection  
diagram.  
Combination VHF/UHF Antenna with 75 ohm Coaxial Cable  
DVD/VCR  
1
IN  
(ANT.)  
75 ohm Coaxial Cable  
OUT  
(TV)  
Combination VHF/UHF Antenna with 300 ohm Twin Lead (Flat) Wire  
2
3
DVD/VCR  
Matching Transformer  
300 ohm Input  
IN  
(ANT.)  
75 ohm output  
(not supplied)  
OUT  
(TV)  
300 ohm Twin Lead (Flat) Wire  
DVD/VCR  
Separate VHF and UHF Antennas  
Combiner  
75/300 ohm Inputs  
75 ohm output  
(not supplied)  
UHF  
VHF  
300 ohm Twin Lead (Flat) Wire  
75 ohm Coaxial Cable  
NOTE: If both VHF and UHF antennas have 300 ohm twin lead (flat) wires, use a combiner having two 300  
ohm inputs and one 75 ohm output.  
NOTES: • A clear picture will not be obtained by the DVD/VCR unless the antenna signal is good. Connect the  
antenna to the DVD/VCR properly.  
For better quality recording, an indoor antenna or a telescopic antenna is not recommended.The use of  
an outdoor type antenna is required.  
If you are not sure about the connection, please refer to qualified service personnel.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic connections  
DVD/VCR TO TV CONNECTION  
After you have connected the antenna to the DVD/VCR, you must connect the DVD/VCR to the TV.  
Below are 3 common methods of connecting your DVD/VCR to a TV. Find the type of TV you are using and follow  
the connection diagram.  
This DVD/VCR has a single 75 ohm output for connection to a TV. If your TV has separate VHF and UHF antenna  
inputs (numbers 2 and 3 below), use a splitter to connect the DVD/VCR to the TV for VHF and UHF reception.  
TV  
NOTE: If a VHF or UHF antenna is  
used, set the TV/CATV  
menu option to the "TV"  
mode.  
VHF/UHF IN  
75 ohm Coaxial Cable (supplied)  
TV with single 75 ohm VHF/UHF  
antenna input  
TV  
NOTE: If a VHF or UHF antenna is  
Splitter  
75 ohm Input  
75/300 ohm outputs  
(not supplied)  
used, set the TV/CATV  
menu option to the "TV"  
mode.  
UHF  
VHF  
75 ohm Coaxial Cable  
(supplied)  
TV with 300 ohm UHFand 75 ohm VHF  
antenna inputs  
TV  
NOTE: If a VHF or UHF antenna is  
used, set the TV/CATV  
menu option to the "TV"  
mode.  
Splitter  
75 ohm Input  
300 ohm outputs  
(not supplied)  
75 ohm Coaxial Cable  
(supplied)  
TV with 300 ohm UHF and 300 ohm VHF  
antenna inputs  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CATV (CABLE TV) connections  
Many cable companies offer services permitting reception of extra channels including pay or subscription channels.  
This DVD/VCR has an extended tuning range and can be tuned to most cable channels without using a cable  
company supplied converter box, except for those channels which are intentionally scrambled. If you subscribe to  
a special channel which is scrambled, you must have a descrambler box for proper reception.  
DVD/VCR  
1
TV  
IN  
(ANT.)  
VHF/UHF  
Incoming Cable  
IN (ANT)  
OUT  
(TV)  
ALLOWS: Recording of nonscrambled channels.  
*
*
*
Use of the programmable timer.  
Recording of one channel while watching another.  
DVD/VCR  
2
Converter/  
Descrambler  
TV  
IN  
(ANT.)  
VHF/UHF  
IN (ANT)  
Incoming  
Cable  
OUT  
(TV)  
ALLOWS: Recording of channels through the converter box  
*
(scrambled and unscrambled).  
NOTE:  
Using the programmable timer to record only the  
channel selected at the converter box.  
To record from converter/descrambler,  
DVD/VCR tuner must be tuned to the  
converter output channel, usually  
channel 3 or 4.  
*
PREVENTS: Recording one channel while watching another.  
*
*
Using the DVD/VCR tuner to select channels.  
DVD/VCR  
3
TV  
IN  
(ANT.)  
VHF/UHF  
IN (ANT)  
Converter/Descrambler  
Incoming Cable  
OUT  
(TV)  
NOTE:  
ALLOWS: Recording of nonscrambled channels.  
*
If you are playing a tape or using the  
Use of the programmable timer.  
Recording an unscrambled channel while watching  
any channel selected at the converter box.  
*
*
tuner built into the DVD/VCR, the  
converter must be set to the video  
channel output of the DVD/VCR (either  
3 or 4).  
PREVENTS: Recording scrambled channels.  
NOTE: Whenever a Converter/Descrambler box is placed before the DVD/VCR, you must tune the DVD/VCR  
to the output of the Converter/Descrambler box, usually channel 3 or 4.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CATV (CABLE TV) connections  
IMPORTANT: Make sure the TV/CATV menu option is set to the "CATV" mode.  
This DVD/VCR cannot receive scrambled programs since it does not contain a descrambler.In order to receive scrambled  
programs, your existing descrambler must be used. Descrambler boxes are available from cable companies. Consult  
your local cable company for more information concerning connection to their descrambler equipment. There are many  
ways to connect your DVD/VCR to a cable system. Below are six common methods of connection.  
DVD/VCR  
TV  
Splitter  
4
A/B Switch  
VHF/UHF  
IN (ANT)  
IN  
(ANT.)  
Incoming  
A
Cable  
OUT  
(TV)  
B
Converter/Descrambler  
ALLOWS: Recording of one channel while watching another.  
*
*
*
Using the programmable timer to record only the channel selected at the converter box.  
Recording of all channels through the converter box.  
PREVENTS: Watching scrambled channels while recording another channel.  
*
*
Using the DVD/VCR tuner to select channels.  
DVD/VCR  
5
TV  
Splitter  
IN  
(ANT.)  
VHF/UHF  
IN (ANT)  
Converter/  
Descrambler  
A/B Switch  
Incoming  
Cable  
OUT  
(TV)  
A
B
ALLOWS: Recording of nonscrambled channels.  
*
Recording of one channel while watching another.  
Watching premium channels through the converter while recording nonscrambled channels.  
Using the programmable timer.  
*
*
*
PREVENTS: Recording scrambled channels.  
DVD/VCR  
Converter/  
Descrambler  
6
TV  
Splitter  
IN  
(ANT.)  
VHF/UHF  
IN (ANT)  
Incoming  
Cable  
OUT  
(TV)  
Converter/  
Descrambler  
A/B Switch  
A
B
ALLOWS: Recording of all channels through the converter box.  
*
*
Recording a scrambled or unscrambled channel while watching another (scrambled or  
unscrambled) channel.  
Using the programmable timer to record only the channel selected at the converter box.  
PREVENTS: Using the DVD/VCR tuner to select channels.  
*
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback Connection  
The exact arrangement you use to interconnect various video and audio components to the DVD/VCR is dependent  
on the model and features of each component. Check the Owner's Manual provided with each component for the  
location of video and audio inputs and outputs.  
Connect to a TV with Audio/Video Output  
Use the supplied AUDIO/VIDEO Cord.  
TV  
Video Output  
Audio (L) Output  
DVD/VCR  
DVD OUTPUT  
DIGITAL AUDIO  
AUDIO  
S-VIDEO  
COMPONENT  
OPTICAL  
COAXIAL  
IN  
Y
L
VIDEO  
(
)
ANT.  
R
PB/CB  
L
AO  
OUT  
(
)
T
V
PR/CR  
R
CH.  
3
4
To Video  
Input  
To Audio (R) Input  
To Audio (L) Input  
Audio (R) Output  
AUDIO/VIDEO Cord (supplied)  
Connect to a TV with S-Video Output  
You can use the following connection only for DVD/CD playback.  
TV  
S-Video Cord (not supplied)  
DVD/VCR  
CH.  
3
4
To S-Video Input  
S-Video Output  
AUDIO Cord (not supplied)  
To Audio (R) Input  
To Audio (L) Input  
Audio (L) Output  
Audio (R) Output  
Connect to a BS TUNER  
VHF/UHF  
Antenna  
TV  
Satellite  
Antenna  
75 ohm Coaxial Cable (not supplied)  
To ANT. Input  
DVD/VCR  
ANT. Input  
BS Tuner  
DVD OUTPUT  
DIGITAL AUDIO  
AUDIO  
S-VIDEO  
COMPONENT  
OPTICAL  
COAXIAL  
IN  
Y
L
VIDEO  
(
)
ANT.  
R
P
B/CB  
R/CR  
L
AO  
OUT  
(
)
T
V
P
R
CH.  
ANT.  
3
4
Output  
Video Output  
ANT. output  
75 ohm Coaxial  
Cable (supplied)  
Audio (L) Output  
To ANT.  
Input  
Audio (R) Output  
AUDIO/VIDEO Cord (supplied)  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback Connection  
Connect to a Stereo Amplifier with Audio Output  
If your TV has a COMPONENT VIDEO IN jack, you can connect the DVD/VCR to the TV with a COMPONENT  
cable (not supplied) as shown below. COMPONENT VIDEO output jack can send higher-quality video signal to a  
TV than S-Video output.  
COMPONENT VIDEO Cord (not supplied)  
To Component  
To  
Component  
Video Input  
Video Output  
AUDIO/VIDEO Cord (supplied)  
To Audio/Video Input  
To Audio/Video Output  
DVD/VCR  
Stereo Amplifier  
DVD OUTPUT  
DIGITAL AUDIO  
AUDIO  
S-VIDEO  
COMPONENT  
OPTICAL  
COAXIAL  
IN  
Y
L
VIDEO  
(
)
ANT.  
R
P
B/CB  
L
AUDIO  
OUT  
(
)
T
V
P
R/CR  
R
CH.  
3
4
TV  
Audio (L) Output  
Audio (R) Output  
To Audio (L) Input  
To Audio (R) Input  
AUDIO Cord (not supplied)  
Connect to an AV Amplifier with built-in digital surround  
If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems  
such as Dolby Digital and DTS by using the Optical or Coaxial Digital Output.  
Use this connection to connect an:  
• AV amplifier with built-in *Dolby Digital decoder  
• AV amplifier with built-in *DTS decoder  
Video cord (not supplied)  
To Video  
DVD/VCR  
Input  
Video Output  
DVD OUTPUT  
TV  
DIGITAL AUDIO  
AUDIO  
S-VIDEO  
COMPONENT  
OPTICAL  
COAXIAL  
IN  
Y
L
VIDEO  
(
)
ANT.  
R
PB/CB  
PR/CR  
L
AUDIO  
OUT  
(
)
T
V
R
CH.  
3
4
NOTE:  
AV Amplifier with  
built-in various  
decoder as above  
You may connect to a TV with a  
Component video cable(not supplied) or  
S-Video cable(not supplied) instead of  
a video cable(not supplied).  
Coaxial digital  
Audio Output  
Coaxial digital cable  
(not supplied)  
Connecting the optical digital cable  
You may connect to an AV Amplifier with an Optical digital cable (not supplied) instead of a Coaxial digital  
cable.  
When you connect the optical digital cable (not supplied), remove the dust protection cap from the rear panel.  
When not using the optical digital cable, attach the dust protection cap to protect against dust.  
NOTES:  
The OPTICAL, COAXIAL, AUDIO L/R, S-VIDEO and COMPONENT jacks are useful only for DVD section. The  
VHS signal is output only from the composite jack(DVD/VCR VIDEO OUTPUT) and UHF/VHF OUT.  
When you make the connections above, do not set DOLBY DIGITAL to DOLBY DIGITAL or DTS to ON on the AV  
Amplifier. If you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing the  
speakers to be damaged.  
Caution for the optical digital audio output connector: Do not connect to an amplifier (with an optical digital input  
connector) which does not contain a Dolby Digital or DTS decoder. Otherwise, any attempt to play DVDs may  
cause such a high level of noise that it may be harmful to your ears and damage your speakers.  
DTS audio will be output only from the COAXIAL or OPTICAL output. To hear DTS audio, DTS-Decoder is  
necessary.  
When playing DTS-encoded CDs, only noise will be heard from the speakers or analogue stereo outputs.  
Some DTS decoders which do not support DVD-DTS interface may not work properly with the unit.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Video Channel / Setting the language  
When a TV is connected with the 75 ohm coaxial cable only.  
Setting the Video Channel  
To view playback of a recorded tape,  
Press POWER to turn on the DVD/VCR.  
or to watch a program selected by  
the VCR's channel selector, the TV  
must be set to channel 3 or 4 (video  
channel).  
1
Slide TV/VCR/DVD switch to VCR/DVD. Then press VCR to  
2 select the VCR mode. The VCR indicator on the front panel  
will light.  
Set the 3/4 Channel selector switch on the rear panel to CH  
3 or 4.  
3
POWER  
TV  
VCR  
DVD  
Turn ON the TV and set to CH 3 or 4 to correspond with the  
channel selected in step 3.  
4
Press TV/VCR to select the VCR position.  
The VCR indicator will appear in the display.  
5
Select any channel to receive a TV station in your area.  
6 The channel number will appear on the screen for about  
OPEN/  
CLOSE  
DVD MENU  
DISPLAY  
MARKER  
A.TRK  
RETURN  
C.RESET  
ANGLE  
4 seconds.  
ZERO RETURN  
SEARCH  
MODE  
SUB TITLE  
For a push-button TV tuner  
SP/EP  
PLAY  
REPEAT  
A-B  
ZOOM  
TITLE  
MODE  
If CH 3 or 4 corresponding to the video channel cannot be tuned  
on your TV, proceed as follows: set the VCR 3/4 channel selector  
and the TV to CH 3 or 4, play back a prerecorded tape and tune  
the TV to receive a sharp color picture from the video cassette  
recorder. Refer to your TV owner's manual for details.  
TV  
POWER  
INPUT  
TV VOL  
TIMER  
TV/VCR  
0
Setting the language  
PLAY  
You can choose from three different languages (English,  
French and Spanish) for the on-screen displays.  
STOP  
C
Press SETUP MENU,  
1
2
3
4
MENU  
SKIP  
SKIP  
If you use the unit for the first time  
and press SETUP MENU, instead  
of the main menu screen on the  
right the SYSTEM SET UP menu  
screen in step 2 may appear.  
TIMER REC SET  
AUTO REPEAT  
SAP  
CH SET UP  
SYSTEM SET UP  
/INDEX  
/INDEX  
ON OFF  
ON OFF  
ENTER/  
SELECT  
SET  
SET  
SET UP  
MENU  
CANCEL  
+/-/ENTER/MENU  
C
Press  
or  
to select the  
SYSTEM SET UP  
CLOCK SET  
LANGUAGE/IDIOMA/LANGUE  
NO NOISE BACKGROUND  
ON OFF  
AUTO CLOCK  
STANDARD TIME  
“LANGUAGE” option, then press  
ENTER.  
NOTES:  
ON OFF  
• If the unit does not operate properly,  
or No key operation (by the unit and/  
or the remote control): Static electric-  
ity, etc., may affect the player's opera-  
tion. Disconnect the AC power cord  
once, then connect it again.  
If no buttons are pressed for more than  
60 seconds,the MENU screen will  
return to normal TV operation  
automatically.  
DAYLIGHT SAVING TIME  
+/-/ENTER/MENU⟩  
Press  
or  
toselectthedesired  
language: English (ENGLISH),  
Spanish (ESPAÑOL) or French  
(FRANCAIS), then press ENTER.  
Both the VCR and the DVD have their  
own menu options (See page 36).  
Press SETUP MENU until the MENU screen is cleared.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuner Setting  
This DVD/VCR is equipped with a channel memory feature which allows channels to skip up or down to  
the next channel set into memory, skipping over unwanted channels. Before selecting channels, they  
must be programmed into the DVD/VCR’s memory. In addition to normalVHF and UHF channels, this DVD/  
VCR can receive up to 113 Cable TV channels. To use this DVD/VCR with an antenna, set the TV/CATV  
menu option to the TV mode. When shipped from the factory, this menu option is in the CATV mode.  
Preparation:  
POWER  
TV  
Turn ON the TV and set it to the video input mode.  
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.  
Then press VCR to select the VCR mode. (The VCR indicator  
will light.)  
VCR  
DVD  
TV/CATV Selection  
Press SETUP MENU. The VCR menu screen will appear.  
1
Press  
or  
to select CH SET UP, then press ENTER.  
OPEN/  
CLOSE  
DVD MENU  
DISPLAY  
MARKER  
A.TRK  
RETURN  
C.RESET  
ANGLE  
ZERO RETURN  
SEARCH  
MODE  
SUB TITLE  
Press  
CATV” option.  
or  
to select the “TV/  
CH SET UP  
2
3
4
SP/EP  
PLAY  
REPEAT  
A-B  
ZOOM  
TITLE  
MODE  
TV CATV  
AUTO CH MEMORY  
ADD/DELETE  
TV  
POWER  
+/-/ENTER/MENU⟩  
INPUT  
TV VOL  
Then press ENTER to select the  
TV or CATV mode. The arrow  
indicates the selected mode.  
CH SET UP  
TV CATV  
AUTO CH MEMORY  
ADD/DELETE  
TIMER  
TV/VCR  
0
PLAY  
STOP  
C
TV  
- VHF/UHF channels  
+/-/ENTER/MENU⟩  
CATV - CABLE TV channels  
SKIP  
SKIP  
/INDEX  
/INDEX  
Press SETUP MENU until the menu screen is cleared.  
ENTER/  
SELECT  
SET  
SET  
SET UP  
MENU  
CANCEL  
C
Setting channels automatically  
The VCR can receive a maximum of 181 channels by  
presetting the channels into memory.  
Repeat above step 1 and press  
CH SET UP  
1
VCR/DVD/TV  
or  
to select AUTO CH  
TV CATV  
AUTO CH MEMORY  
ADD/DELETE  
MEMORY.  
+/-/ENTER/MENU⟩  
NOTE:  
You can not select "CH SET UP" if you  
set the channel to "L".  
Then press ENTER.  
2
CH 002  
The auto tuning will start. The  
channel display will count up and  
when finished, the screen returns  
to normal.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To ADD/DELETE channels / Noise elimination  
Preparation:  
Turn ON the TV and set it to the video input mode.  
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.  
Then press VCR to select the VCR mode. (The VCR indicator  
To ADD/DELETE channels  
You can add the channels you want  
or delete the channels you do not  
want manually.  
will light.)  
POWER  
TV  
Repeat the step 1 on page 19.  
VCR  
DVD  
CH SET UP  
TV CATV  
AUTO CH MEMORY  
ADD/DELETE  
1
2
Then press  
or  
to select the  
“ADD/DELETE” option and press  
ENTER.  
+/-/ENTER/MENU⟩  
OPEN/  
CLOSE  
To Add or Delete desired channels  
DVD MENU  
DISPLAY  
MARKER  
A.TRK  
RETURN  
C.RESET  
ANGLE  
ZERO RETURN  
1
Press Number keys or  
/
SEARCH  
MODE  
SUB TITLE  
ADD  
CH 003  
to select a channel number  
you want to add or delete.  
SP/EP  
PLAY  
REPEAT  
A-B  
ZOOM  
TITLE  
MODE  
TV  
2
To add channels  
POWER  
Press ENTER until “ADD”  
appears on the screen to set  
to add the unmemorized  
channel.  
+/-/0-9/ENTER/MENU⟩  
INPUT  
TV VOL  
TIMER  
TV/VCR  
0
To delete channels  
Press ENTER until “DELETE” appears on the screen to  
set to delete the channel from memory. The channel  
number will blink.  
PLAY  
STOP  
C
3
Repeat 1 to 2 to add or delete other channel.  
SKIP  
SKIP  
/INDEX  
/INDEX  
Press SETUP MENU until the menu screen is cleared.  
3
ENTER/  
SELECT  
SET  
SET  
SET UP  
MENU  
CANCEL  
C
Noise elimination  
When you don't want to receive a weak signal broadcast, the  
Blue back screen can be obtained by selecting the NO NOISE  
BACKGROUND "ON". When the unit is shipped from the  
factory, the NO NOISE BACKGROUND is set to the "ON".  
VCR/DVD/TV  
Repeat the steps 1~2 on page 18 and press  
NO NOISE BACKGROUND.  
or  
to select  
1
Press ENTER to select the ON  
SYSTEM SET UP  
CLOCK SET  
LANGUAGE/IDIOMA/LANGUE  
NO NOISE BACKGROUND  
ON OFF  
2 position.  
AUTO CLOCK  
ON OFF  
STANDARD TIME  
DAYLIGHT SAVING TIME  
+/-/ENTER/MENU⟩  
Press SETUP MENU until the menu screen is cleared.  
3
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto clock setting  
The Auto Clock feature enables the automatic clock setting and updating, and also to set the Time Zone  
and Daylight Saving Time by receiving XDS (Extended Data Service) information carried on the channel  
signal.  
Preparation:  
You must set the antenna connection before the AC cord plug is  
inserted into the AC outlet.  
Make sure the AUTO CH MEMORY (on P.19) is done.  
Auto clock setting  
POWER  
TV  
VCR  
DVD  
WAIT 30 MINUTES! when the power switch is off, after the  
connections of the antenna and the power plug. Because the Auto  
Clock setting feature is activate.  
After the clock is set automatically, you may have to set the Time  
Zone and Daylight Saving Time.  
Press POWER to turn on the DVD/VCR after the Auto Clock operation  
completed.  
When shipped from factory, the AUTO CLOCK option is set to ON position.  
If you turn the DVD/VCR on during Auto Clock setting, the clock is not set.  
With cable box connection, if the Auto Clock Setting is unsuccessful,  
please select the PBS channel carrying the XDS information, then  
turn the DVD/VCR off. After 30 minutes, turn the DVD/VCR on, and  
if the clock is not set automatically, set the clock manually. (See page 23)  
OPEN/  
CLOSE  
DVD MENU  
DISPLAY  
MARKER  
A.TRK  
RETURN  
C.RESET  
ANGLE  
ZERO RETURN  
SEARCH  
MODE  
SUB TITLE  
SP/EP  
PLAY  
REPEAT  
A-B  
ZOOM  
TITLE  
MODE  
TV  
Canadian Viewers:  
POWER  
Please see note regarding the Auto Clock Setting option on page 55.  
INPUT  
Time Zone setting (STANDARD TIME)  
TV VOL  
In the rare event that you live within broadcast range of two  
stations in two different time zones, the DVD/VCR may recognize  
the wrong station for the AUTO CLOCK set.  
TIMER  
TV/VCR  
0
PLAY  
To correct the situation:  
Preparation:  
Turn ON the TV.  
When a TV is connected with an audio/video cable, select the video  
input mode on the TV.  
STOP  
C
SKIP  
SKIP  
/INDEX  
/INDEX  
When a TV is connected only with an antenna cable, set to the  
video channel 3 or 4. Then select VCR position with TV/VCR.  
Make sure the VCR mode has been selected. (Is the VCR indicator  
being light?) (see steps 1~2 on page 18)  
ENTER/  
SELECT  
SET  
SET  
SET UP  
MENU  
CANCEL  
Press SETUP MENU. The VCR menu screen will appear.  
1
C
Press  
or  
to select the SYSTEM SET UP menu, then  
press ENTER.  
Press or  
“STANDARD TIME” option, then  
press ENTER.  
to select the  
SYSTEM SET UP  
CLOCK SET  
LANGUAGE/IDIOMA/LANGUE  
NO NOISE BACKGROUND  
ON OFF  
2
VCR/DVD/TV  
AUTO CLOCK  
ON OFF  
STANDARD TIME  
DAYLIGHT SAVING TIME  
+/-/ENTER/MENU⟩  
NOTES:  
After Auto Clock setting, in some case  
the clock may display the other time  
zone’s. You can correct the clock by  
selecting your Time Zone setting  
above.  
When the clock is not set or you set  
the clock manually, Time Zone setting  
is not available.  
Press  
or  
to select your Time  
STANDARD TIME  
3
4
Zone, then press the ENTER.  
ATLANTIC  
CENTRAL  
PACIFIC  
HAWAII  
EASTERN  
MOUNTAIN  
ALASKA  
AUTO  
+/-/ENTER/MENU⟩  
Press SETUP MENU until the MENU screen is cleared.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto clock setting  
Daylight saving time setting  
You can set the Daylight saving  
Preparation:  
Turn ON the TV.  
When a TV is connected with an audio/video cable, select the  
video input mode on the TV.  
time automatically or manually.  
When a TV is connected only with an antenna cable, set to the  
video channel 3 or 4. Then select VCR position with TV/VCR.  
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.  
Then press VCR to select the VCR mode. (The VCR indicator  
will light.)  
POWER  
TV  
VCR  
DVD  
Repeat the step 1 on page 21 and  
1
2
SYSTEM SET UP  
CLOCK SET  
LANGUAGE/IDIOMA/LANGUE  
NO NOISE BACKGROUND  
ON OFF  
AUTO CLOCK  
STANDARD TIME  
DAYLIGHT SAVING TIME  
press  
or  
to select DAYLIGHT  
SAVINGTIME,thenpress ENTER.  
ON OFF  
OPEN/  
CLOSE  
DVD MENU  
DISPLAY  
MARKER  
A.TRK  
RETURN  
C.RESET  
ANGLE  
ZERO RETURN  
+/-/ENTER/MENU⟩  
SEARCH  
MODE  
SUB TITLE  
SP/EP  
PLAY  
REPEAT  
A-B  
ZOOM  
TITLE  
MODE  
TV  
Press  
or  
to select one of  
DAYLIGHT SAVING TIME  
POWER  
the options, then press ENTER.  
ON  
INPUT  
OFF  
AUTO  
for manual setting  
(forward one hour)  
for manual setting  
(back one hour)  
for automatic setting  
(read XDS in the signal)  
ON:  
+/-/ENTER/MENU⟩  
TV VOL  
OFF:  
AUTO:  
TIMER  
TV/VCR  
0
PLAY  
STOP  
C
When you want to set the Daylight Saving Time manually, on  
the first Sunday in April you set to “ON”, and on the last  
Sunday in October you set to “OFF”.  
SKIP  
SKIP  
/INDEX  
/INDEX  
ENTER/  
SELECT  
SET  
SET  
NOTES:  
SET UP  
MENU  
CANCEL  
When shipped from factory, the DAYLIGHT SAVING TIME  
option is set to AUTO position.  
C
When the clock is not set, Daylight Saving Time setting is not  
available.  
When there is no Daylight Saving Time in your area, always  
select OFF position in step 2.  
VCR/DVD/TV  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Manual clock setting  
You must set the date and time  
manually for timer recordings and  
Daylight Saving Time if the Auto  
Clock process did not set them  
correctly.  
Preparation:  
Turn ON the TV and set to the video input mode.  
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.  
Then press VCR to select the VCR mode. (The VCR indicator  
will light.)  
EXAMPLE: Setting the clock to "8:30 AM" October, 26 (SAT), 2002.  
POWER  
TV  
VCR  
DVD  
Press SETUP MENU. The VCR menu screen will appear.  
1
Press  
or  
to select the  
2
3
4
MENU  
TIMER REC SET  
AUTO REPEAT  
SAP  
CH SET UP  
SYSTEM SET UP  
SYSTEM SET UP menu, then  
press ENTER.  
ON OFF  
ON OFF  
OPEN/  
CLOSE  
DVD MENU  
DISPLAY  
MARKER  
A.TRK  
RETURN  
C.RESET  
ANGLE  
ZERO RETURN  
+/-/ENTER/MENU  
SEARCH  
MODE  
SUB TITLE  
SP/EP  
PLAY  
REPEAT  
A-B  
ZOOM  
TITLE  
MODE  
TV  
Press  
or  
to select the  
SYSTEM SET UP  
CLOCK SET  
LANGUAGE/IDIOMA/LANGUE  
NO NOISE BACKGROUND  
ON OFF  
AUTO CLOCK  
STANDARD TIME  
POWER  
“CLOCK SET” option, then press  
ENTER.  
INPUT  
ON OFF  
DAYLIGHT SAVING TIME  
TV VOL  
+/-/ENTER/MENU⟩  
TIMER  
TV/VCR  
0
PLAY  
Press  
or  
to set the month,  
STOP  
C
then press ENTER button.  
SKIP  
SKIP  
/INDEX  
/INDEX  
ENTER/  
SELECT  
SET  
SET  
SET UP  
MENU  
To make corrections any time during the process  
CANCEL  
Press CANCEL repeatedly until the item you want to change  
C
blinks, then press  
or  
.
Set the day, year and time as in  
step 4.  
5
6
MONTH  
DAY  
10  
26 (SAT)  
2002  
VCR/DVD/TV  
YEAR  
TIME  
8 : 30AM  
+/–/ENTER/CANCEL/MENU  
NOTE:  
After a power failure or disconnection  
of the power, the timer settings will be  
lost. In this case, reset the present time.  
After setting the clock, date and  
time starts functioning  
automatically.  
8 : 30AM SAT  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading and Unloading a Cassette Tape  
Use only video cassette tapes marked  
and  
.
Cassettes marked “VHS” (or “S-VHS”) can be used with this video cassette recorder. However, S-VHS recording  
is not possible with this model.  
This model is equipped with SQPB (S-VHS QUASI PLAYBACK) that makes it possible to play back S-VHS  
recordings with regular VHS resolution.  
HQ VHS is compatible with existing VHS equipment.  
Loading  
Insert the cassette tape with its labeled side facing up  
and the erase prevention tab positioned at your left. An  
inverted cassette tape cannot be inserted.  
Push the center of the tape until it is automatically  
inserted.  
VCR  
Erase prevention tab  
Automatic power ON  
When you insert a cassette tape the VCR power will turn ON automatically.  
Automatic playback  
When loading a cassette tape without an erase prevention tab, playback will start automatically.  
Unloading  
Press EJECT on the unit.  
Remove the cassette tape.  
1
2
Automatic tape eject  
This VCR will automatically rewind the tape when the tape has ended. And when the tape is rewinded to its  
beginning, the cassette tape will be ejected automatically.  
To prevent accidental erasure  
To record again  
Removetheerasepreventiontabwithascrewdriver.  
Cover the hole with a piece of adhesive tape.  
Screwdriver  
Erase prevention tab  
Adhesive tape  
Tape speed and maximum recording time  
Video cassette tape  
Tape Speed  
T-160  
2-2/3 hours  
8 hours  
T-120  
2 hours  
6 hours  
T-90  
T-60  
T-30  
SP (Standard Play)  
EP (Extended Play)  
1-1/2 hours  
4-1/2 hours  
1 hour  
3 hours  
30 minutes  
1-1/2 hours  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cassette tape Playback  
Preparation:  
Turn ON the TV and set to the video input mode.  
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.  
Then press VCR to select the VCR mode. (The VCR indicator  
will light.)  
Load a prerecorded tape  
1
POWER  
TV  
VCR  
DVD  
(When loading a cassette tape  
without the erase prevention  
tab, playback will start auto-  
matically).  
To start playback  
2
Press PLAY.  
Playback will start.  
OPEN/  
CLOSE  
DVD MENU  
DISPLAY  
MARKER  
A.TRK  
RETURN  
C.RESET  
ANGLE  
ZERO RETURN  
"
" will appear on the screen  
SEARCH  
MODE  
SUB TITLE  
for about 4 seconds.  
SP/EP  
PLAY  
REPEAT  
A-B  
ZOOM  
TITLE  
MODE  
TV  
POWER  
To stop playback  
INPUT  
Press STOP once.  
The tape will stop but remain  
fully loaded and ready to play.  
TV VOL  
TIMER  
TV/VCR  
0
"
" will appear on the screen  
for about 4 seconds.  
PLAY  
STOP  
C
To rewind the tape or forward it rapidly  
SKIP  
SKIP  
/INDEX  
/INDEX  
Stop the playback or recording with STOP.  
To rewind the tape:  
To forward the tape:  
Press FF.  
ENTER/  
SELECT  
SET  
SET  
Press REW.  
SET UP  
MENU  
CANCEL  
C
VCR/DVD/TV  
To stop the tape-winding, press STOP. To switch to playback  
directly (without STOP), press PLAY.  
Forward/Reverse picture search mode  
NOTES:  
When the tape is being winded, you can switch to picture search  
mode (see next page). To do this, press REW or FF and hold it  
down.Theunitwillresumethetapewindingassoonasthebutton  
is released.  
This VCR selects the playback tape  
speed SP or EP automatically.  
The Cassette tape and DVD disc can  
be played back simultaneously. If you  
press VCR or DVD, the tape playback  
and DVD playback alternate with each  
other on the screen.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Special playback  
Repeat playback  
Picture Search  
The entire video tape will be played until its end.The  
tape will then automatically rewind to the beginning and  
the playback will be repeated.  
Reverse picture search function  
Press REW x 1 or x 2 during the playback.  
Forward picture search function  
Press SETUP MENU. Press  
AUTO REPEAT.  
or  
to select  
Press FF x 1 or x 2 during the playback.  
1
2
To return to playback: Press PLAY.  
Then press ENTER to  
MENU  
TIMER REC SET  
AUTO REPEAT  
SAP  
CH SET UP  
SYSTEM SET UP  
select [ON] or [OFF].  
If [ON] is selected, the  
playback will be  
repeated endlessly.  
ON OFF  
ON OFF  
Still Picture  
Press PAUSE during playback. To resume normal  
playback: Press PLAY.  
+/-/ENTER/MENU  
Slow Motion  
Press SETUP MENU until the menu screen is  
cleared.  
if you press OSD, " " will appear on the screen.  
3
4
During playback press SLOW.  
To return to playback: Press PLAY or SLOW.  
Slow tracking and vertical lock adjustment  
If noise bars appear in the picture during slow motion,  
press the SET + or to reduce the noise bars.  
If the still picture jitters excessively, press SET + or –  
to stabilize the still picture.  
To start the playback, press PLAY.  
The playback will be repeated endlessly.  
To cancel repeat mode:  
Follow the above step 1, then press ENTER to select  
the OFF position. Press SETUP MENU to return to  
the TV.  
Frame by Frame picture  
Press PAUSE during playback.  
Press SLOW one by one: The picture advances frame  
by frame.  
To return to playback: Press PLAY or PAUSE.  
Skip Search  
Adjusting tracking condition  
Each time you press SKIP SEARCH while a tape is  
playing, the unit will fast-forward ahead 30 seconds  
on the tape.You may press the button up to six times  
in a row to move 180 seconds (three minutes) ahead.  
Automatic tracking adjustment  
Whenever you insert a tape and start playback,  
automatic tracking starts working and continuously  
analyzes the signal to enable optimum picture quality  
during playback.  
1 press: 30 seconds of tape  
2 presses: 60 seconds of tape  
3 presses: 90 seconds of tape  
For example:  
Manual tracking adjustment  
If automatic tracking cannot eliminate noises well during  
playback, press SET +/– to eliminate the noises.  
“MANUAL TR.will appear. Press it briefly for a fine  
adjustment, or press and hold for a coarse adjustment.  
Press A.TRK to reactivate automatic tracking again.  
“AUTO TR.” will appear.  
Notes:  
The audio output is muted during SPEED SEARCH,  
STILL, FRAME ADVANCE and SLOW MOTION.  
• During picture search mode there will be noise bars  
which are caused by the system.  
• The Special Playback will automatically change to  
playback after approx. 5 minutes to protect the video  
tape against excessive wear.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ZERO RETURN function / Video Index Search system  
Preparation:  
Turn ON the TV and set it to the video input mode.  
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.  
Then press VCR to select the VCR mode. (The VCR indicator  
ZERO RETURN function  
This function makes tape-rewinding  
stop at the counter 00:00:00 position  
automatically.  
will light.)  
OPEN/  
DVD MENU  
DISPLAY  
MARKER  
A.TRK  
RETURN  
C.RESET  
ANGLE  
CLOSE  
Press OSD.  
The counter display shows the tape  
running time during playback or  
1
2
3
8 : 47AM MON  
STEREO SAP  
CH 001  
ZERO RETURN  
SEARCH  
MODE  
SUB TITLE  
SP/EP  
recording.  
PLAY  
REPEAT  
A-B  
ZOOM  
TITLE  
MODE  
VCR  
00 : 04 : 38 SP  
TV  
POWER  
Press C. RESET at the desired tape po-  
sition. The counter display will be reset  
to the "00:00:00" position (e.g. the  
INPUT  
8 : 47AM MON  
STEREO SAP  
CH 001  
begining of recording).  
TV VOL  
VCR  
00 : 00 : 00 SP  
TIMER  
TV/VCR  
0
PLAY  
Press STOP when playback or recording is finished.  
Press ZERO RETURN.  
The tape will be rewinded or fast forwarded and automatically  
stop at the ”00:00:00” position.  
STOP  
C
SKIP  
SKIP  
/INDEX  
/INDEX  
The DISPLAY-button  
Press DISPLAY. The clock and tape counter  
ENTER/  
SELECT  
SET  
SET  
VCR  
SET UP  
MENU  
alternate with each other in the display.  
CANCEL  
C
VCR  
NOTES for Counter Display:  
Video Index Search system  
This function enables you to locate the beginning of any  
recording made on the VCR.  
Ifyourewindthetapebeyond00:00:00”,  
a minus sign (“–”) will be displayed in  
front of the time counter.  
When you load a tape, the counter will  
reset to “00:00:00”.  
The counter does not function on  
nonrecorded (blank) sections of the  
tape. When you rewind, fast forward or  
play tapes through blank sections, the  
counter stops.  
Recording an INDEX MARK  
The Index Search function automatically  
records an INDEX mark on the tape  
whenever a recording is initiated.  
CH 001  
INDEX  
NOTES for Video Index Search system:  
Index Search  
Press INDEX  
mode.  
For Succeeding programs: Press INDEX  
For Preceding programs: Press INDEX  
(Additional press increases the INDEX NO.  
up to 9.)  
When you record an INDEX mark at  
the very beginning of the tape, the  
mark may not be found.  
During INDEX search, the tape may  
stop and begin to play at a slightly  
different location.  
or  
during stop or play  
+3  
.
.
INDEX may not function properly with  
old or worn out video tapes.  
INDEX marks may not be found if it is  
extremely close to the point where the  
search began.  
In recording, if you stop recording  
temporarily, the INDEX mark is not  
recorded on the tape.  
When the INDEX  
or  
is pressed, the  
or  
is displayed  
unit starts searching the INDEX NO.  
selected and finds the portion, then  
playback starts automatically.  
INDEX NO. (up to 9)  
To stop the Index Search, press STOP.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording a TV program  
Recording and viewing the  
same TV program  
Preparation:  
Turn ON the TV and set it to the video input mode.  
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.  
Then press VCR to select the VCR mode. (The VCR indicator  
will light.)  
Load a cassette tape with the erase  
prevention tab intact.  
The VCR will automatically turn on.  
POWER  
TV  
VCR  
DVD  
1
Press SP/EP to select the desired tape  
2 speed SP or EP.  
OPEN/  
CLOSE  
DVD MENU  
DISPLAY  
MARKER  
A.TRK  
RETURN  
C.RESET  
ANGLE  
The tape counter and SP or EP will  
appear on the screen for about 4  
ZERO RETURN  
SEARCH  
MODE  
SUB TITLE  
00 : 00 : 00 SP  
SP/EP  
seconds.  
PLAY  
REPEAT  
A-B  
ZOOM  
TITLE  
MODE  
TV  
POWER  
Set the TV/CATV option to the appropriate position (See page  
19).  
3
INPUT  
TV  
- VHF/UHF channels  
CATV - CABLE TV channels  
TV VOL  
TIMER  
TV/VCR  
0
Press Number keys or VCR CH +/– to select the channel to  
4 be recorded.  
PLAY  
1-9  
Press 0 twice and then 1-9 as required. Example: To  
select 2, Press “002”.  
Press 0 first and then the remaining 2 digits in order  
from left to right.  
STOP  
C
10-12  
SKIP  
SKIP  
/INDEX  
/INDEX  
Example: Press 012 for “12”.  
Press 2 digits in order.  
CH 110  
13-99  
ENTER/  
SELECT  
Example: Press 22 for “22”.  
SET  
SET  
100-125 Press the 3 digits in order.  
SET UP  
MENU  
CANCEL  
Example: Press 110 for “110”.  
C
VHF/UHF/CATV CHANNELS  
TV  
CATV  
VHF  
2-13  
VHF  
2-13  
UHF  
14-69  
STD/HRC/IRC  
14-36 (A) (W)  
VCR/DVD/TV  
37-59 (AA) (WW)  
60-85 (AAA) (ZZZ)  
86-94 (86) (94)  
95-99 (A-5) (A-1)  
100-125 (100)(125)  
01 (5A)  
NOTE:  
Iftheerasepreventiontabisremoved,  
the tape will eject when both the REC  
and PLAY are pressed for recording.  
If you wish to watch the DVD playback  
during the normal recording on VCR,  
press DVD to change to DVD mode  
and perform the DVD playback(see  
P.37).  
On the VCR, press REC.  
5 Or on the Remote, while holding REC,  
CH 110  
press PLAY.  
" will appear on the screen for  
"
INDEX  
about 4 seconds and “REC” will  
appear on the display.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording a TV program  
To stop recording  
Press STOP to stop recording.  
" will appear on screen for about 4  
"
seconds.  
To stop recording temporarily  
POWER  
TV  
VCR  
DVD  
Press PAUSE to avoid recording unwanted  
material. Press again to continue the  
recording.  
"
" will appear on screen for about 4  
seconds.  
NOTE:  
OPEN/  
CLOSE  
The pause function will be released after 5 minutes to prevent damage  
to the tape or the VCR. The VCR will change to the STOP mode.  
You can select a recording channel in the recording pause mode.  
DVD MENU  
DISPLAY  
MARKER  
A.TRK  
RETURN  
C.RESET  
ANGLE  
ZERO RETURN  
SEARCH  
MODE  
SUB TITLE  
SP/EP  
PLAY  
REPEAT  
A-B  
ZOOM  
TITLE  
MODE  
TV  
Recording one program while watching another  
POWER  
While the VCR is recording, press TV/VCR to select the TV position.  
The “VCR” will go off and recording will continue.  
INPUT  
Select the TV channel you want to watch by using the TV channel  
selector. If the connected TV is JVC’s, use TV CH +/– after slide TV/  
VCR/DVD switch to TV.  
TV VOL  
TIMER  
TV/VCR  
0
NOTE:  
PLAY  
Some CATV hookups do not permit viewing one channel while  
recording another. See pages 14,15.  
STOP  
C
SKIP  
SKIP  
To Display VCR operation Status  
/INDEX  
/INDEX  
Press OSD. The clock, day of the week and more information will be  
indicated.  
ENTER/  
SELECT  
SET  
SET  
While watching TV  
DAY OF THE WEEK  
SET UP  
MENU  
CANCEL  
C
CLOCK  
8 : 47AM MON  
STEREO SAP  
CH 125  
CHANNEL  
STEREO AND  
SEPARATE AUDIO  
PROGRAM (SAP)  
00 : 00 : 00 SP  
TAPE SPEED  
VCR/DVD/TV  
REAL TIME COUNTER  
While operating a tape  
Auto Rewind feature  
This VCR will automatically rewind the  
tape when the tape has ended (except  
during ITR and TIMER REC). It will also  
eject the tape.  
OPERATING  
MODE  
8 : 30AM MON  
HI-FI  
CH 125  
HI-FI STEREO  
AUTO REPEAT  
TAPE IN  
00 : 00 : 00 SP  
To cancel the display: Press OSD until all indicators disappear.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instant Timer Recording (ITR)  
The Instant Timer Recording  
feature provides a simple and  
convenient way to make a timed  
recording.  
Preparation:  
Turn ON the TV and set it to the video input mode.  
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.  
Then press VCR to select the VCR mode. (The VCR indicator  
will light.)  
Example: Instant Timer Recording for 30 minutes.  
POWER  
TV  
VCR  
DVD  
Load a cassette tape with the erase  
prevention tab intact.  
The VCR will automatically turn on.  
1
OPEN/  
CLOSE  
DVD MENU  
DISPLAY  
MARKER  
A.TRK  
RETURN  
C.RESET  
ANGLE  
Press SP/EP to select the desired tape  
ZERO RETURN  
2 speed SP or EP.  
SEARCH  
MODE  
SUB TITLE  
The tape counter and SP or EP will  
appear on the screen for about 4  
SP/EP  
PLAY  
REPEAT  
A-B  
ZOOM  
TITLE  
MODE  
00 : 00 : 00 SP  
seconds.  
TV  
POWER  
INPUT  
Set the TV/CATV option to the appropriate position (See page  
19).  
3
TV  
- VHF/UHF channels  
TV VOL  
CATV - CABLE TV channels  
TIMER  
TV/VCR  
0
PLAY  
Press Number keys or VCR CH +/– to  
4 select the channel to be recorded.  
CH 110  
STOP  
C
SKIP  
SKIP  
/INDEX  
/INDEX  
ENTER/  
SELECT  
SET  
SET  
Press REC on the VCR or while holding REC, press PLAY on  
the Remote to begin recording. Press REC on the VCR again to  
stop recording after 30 minutes. Each additional press of REC  
will increase recording time as shown in the chart below, up to a  
maximum of 5 hours.The ITR and recording time will appear on  
the screen for about 4 seconds. And, REC will keep blinking in  
the display.  
5
SET UP  
MENU  
CANCEL  
C
Press  
once  
Press  
Recording time  
NORMAL REC  
0:30  
Recording time  
3:00  
ITR 0 : 30  
CH 125  
VCR/DVD/TV  
6 times  
7 times  
8 times  
9 times  
4:00  
twice  
5:00  
3 times  
4 times  
5 times  
1:00  
INDEX  
NORMAL REC  
1:30  
2:00  
NOTE:  
If you wish to watch the DVD playback  
during the ITR, press DVD to change to  
DVD mode and perform the DVD play-  
back (see P.37).  
To cancel ITR  
Press STOP or turn off the power.  
" will appear on screen for about 4  
seconds.  
"
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Timer Recording  
Timer recording can be programmed  
on-screen with the remote control.  
The built-in timer allows automatic  
unattended recording of up to 8  
programs within 1 month.  
Preparation:  
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.  
Then press VCR to select the VCR mode.  
Load a cassette tape with the erase prevention tab intact.  
Press OSD to verify that the time and date are correct (see page  
29).  
OPEN/  
DVD MENU  
DISPLAY  
MARKER  
A.TRK  
RETURN  
C.RESET  
ANGLE  
CLOSE  
Example: Program a timer recording for the 26th day, channel 125  
(CATV), 11:00 - 11:30 PM on timer program number 1 (Tape speed: EP).  
ZERO RETURN  
SEARCH  
MODE  
SUB TITLE  
SP/EP  
PLAY  
REPEAT  
A-B  
Press SETUP MENU. Select the  
TIMER REC SET option, then press  
ENTER.  
MENU  
TIMER REC SET  
AUTO REPEAT  
SAP  
CH SET UP  
SYSTEM SET UP  
ZOOM  
TITLE  
MODE  
1
ON OFF  
ON OFF  
TV  
POWER  
INPUT  
+/-/ENTER/MENU  
Press SET + or to select one of the  
DATE  
START END  
CH  
TV VOL  
2 program line, then press ENTER.  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
TIMER  
TV/VCR  
0
PLAY  
+/-/ENTER/CANCEL/MENU⟩  
STOP  
C
Press SET + or to select the date,  
then press ENTER.  
DATE  
START END  
CH  
3
26(SU)  
— : — — — : — — — —  
SKIP  
SKIP  
— — — — — — : — — — : — — — —  
/INDEX  
/INDEX  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
ENTER/  
SELECT  
SET  
SET  
+/-/ENTER/CANCEL/MENU⟩  
SET UP  
MENU  
CANCEL  
Set the start time, end time, channel  
C
DATE  
START END  
CH  
4 and tape speed as in step 3.  
26(SU) 11:0: 0PM 11:3: 0PM125 EP  
— —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
NOTES:  
NOTES:  
PressCANCELtomovecursorbackward  
for correction.  
To record from external source set the  
channel to "L". "L" will appear next to CH  
125 (or 69).  
Iftheclocksymbol( )blinkswhenthe  
timerrecordingended,theTVprogram  
has not been completely recorded  
becauseofaninsufficienttapesupply.  
In this case, press TIMER to cancel  
the timer program or press EJECT to  
remove the cassette tape.  
During timer recording standby mode,  
the VCR mode cannot be selected. To  
use the VCR, press TIMER at first,  
then press VCR to change to VCR  
mode. After you use the VCR, press  
TIMER again to put the VCR into timer  
recording standby mode.  
If you press TIMER during timer  
recording, the recording operation will  
be interrupted. If you press TIMER  
againwithintheprogrammedtime,the  
recording operation will start again.  
After a power failure or disconnection  
of the power plug, all programmed  
recording settings and time display  
will be lost upon resumption of power.  
Inthiscase,resettheclock(seepages  
21-23) and reprogram any timer  
recordings.  
+/-/ENTER/CANCEL/MENU⟩  
To enter other programs, repeat step  
2 through 4.  
DATE  
START END  
CH  
5
26(SU) 11:0: 0PM 11:3: 0PM125 EP  
— —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
To return to the normal screen,  
press SETUP MENU twice.  
+/-/ENTER/CANCEL/MENU⟩  
Press TIMER. The clock symbol( ) will appear on the display  
and the VCR stands by for recording. At the same time, VCR  
mode will change to DVD mode automatically. You can use  
DVD even if the VCR is in the Timer recording mode.  
If you do not use the DVD, turn the power off.  
6
The timer recording will start at 5 seconds before the time you  
predetermined.  
NOTES:  
If the clock symbol( ) does not appear on the display in spite  
of the pressing of TIMER, the cassette may not have been  
loaded yet. (see page 24)  
If the cassette is ejected in spite of the pressing of TIMER , the  
erase prevention tab of the cassette may have been removed.  
(see page 24)  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Timer-Recording  
Timer Recording Special case  
Weekly (e.g. WKL-TU: each Tuesday) or daily (e.g.  
MO-SA: Monday to Saturday) Timer recording  
Confirmation / Cancellation of the Timer  
Recording  
If the Timer has been activated, press TIMER to  
Follow the procedure of timer recording on the previous  
page. At picture 3 press SET + or repeatedly until the  
desired setting appears. Then press ENTER.  
1
deactivate the Timer. The clock symbol( ) will  
disappear. Then press VCR to change to VCR  
mode.  
When you press SET – repeatedly, the indicator at  
DATE will change as follows, in this case the today is  
Friday.  
To confirm Timer program:  
2
At picture 1 on the  
DATE  
START END  
CH  
26(SU) 11:0: 0PM 11:3: 0PM125 EP  
previous page select the  
TIMER REC SET option  
and press ENTER.  
— —  
— — — — — — : — — — : — — — —  
The current day (Friday)  
SU-SA (Sunday to Saturday)  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
MO-SA (Monday to Saturday)  
MO-FR (Monday to Friday)  
WKL-TH (Weekly Thursday)  
Then the timer program  
list as right will appear on  
the screen.  
One month later  
minus one day  
+/-/ENTER/CANCEL/MENU⟩  
WKL-WE  
(Weekly Wednesday)  
To cancel Timer program:  
3
4
Press SET + or to  
select the unnecessary  
program, then press  
CANCEL to cancel the  
program.  
DATE  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
START END  
CH  
DATE  
START END  
— : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
CH  
WKL-WE  
+/-/ENTER/CANCEL/MENU⟩  
+/-/ENTER/CANCEL/MENU⟩  
PressSETUPMENUrepeatedlyuntiltheTV-picture  
appears.  
In case Timer programs-overlap  
Do not overlap timer programs as portions of the  
conflicting programs will be lost. The first recording  
timehaspriorityoverthenextrecordingtimeasshown  
in the diagram below.  
NOTES:  
If there are other timer record programs remaining,  
TIMER must be pressed to reactivate the timer,  
otherwise the remaining timer record programs will  
be ignored.  
You cannot confirm the Timer program during timer  
recording operation.  
You can also correct the programmed setting in  
program confirm mode.  
8 : 00  
9 : 00  
10 : 00  
11 : 00  
Program 1  
Program 2  
Deleted Parts  
Program 3  
At step 2 above, press ENTER to enter the program  
input mode. Then press ENTER repeatedly until the  
item you wish to correct  
Non Recorded Portion Parts  
Recording  
Control Settings  
Prog.1  
Prog.2  
Prog.3  
DATE  
START END  
CH  
26(SU) 11:0: 0PM 11:3: 0PM125 EP  
blinks. Thencorrectthedata  
with SET + or .  
Then press SETUP MENU  
repeatedly until the TV-  
picture appears.  
— —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
— — — — — — : — — — : — — — —  
+/-/ENTER/CANCEL/MENU⟩  
NOTES:  
The daily/weekly recording can be made continu-  
ously until the recording is canceled or the tape  
reaches the end.  
During timer recording the automatic rewinding  
mechanism does not function.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Stereo Recording and Playback / Separate Audio Program (SAP)  
Stereo Recording and  
When a MTS STEREO broadcast is  
received, the word STEREO will appear  
on the screen and the program can be  
viewed or recorded in stereo.  
The Hi-Fi STEREO recording procedure  
is the same as for normal recordings.  
Playback  
The VHS Hi-Fi audio system permits high  
fidelity recording of MTS STEREO TV  
broadcasts.  
STEREO  
POWER  
NOTES:  
TV  
VCR  
DVD  
WhenusingaCATVsystem, stereoTVprogramsmaybetransmitted  
over a mono cable channel. In this case the word "STEREO" will not  
appear and the sound will be in mono.  
Output selection  
When viewing an MTS STEREO TV program, or playing a prerecorded  
VHS Hi-Fi STEREO videotape, press A. MONITOR to select how the  
audio will be heard through the speakers. Normally set to the Hi-Fi  
STEREO position, this button can be set to the MONO position if the  
stereo broadcast or videotape audio is of poor quality. The "R" and "L"  
positions allow the audio from the Right or Left Hi-Fi channel to be heard  
over both TV speakers.This button has no effect when viewing a MONO  
videotape orTV program.Each time when you press the button, OUTPUT  
SELECTION display appears on the screen for several seconds. Refer  
to the chart below.  
OPEN/  
CLOSE  
DVD MENU  
DISPLAY  
MARKER  
A.TRK  
RETURN  
C.RESET  
ANGLE  
ZERO RETURN  
SEARCH  
MODE  
SUB TITLE  
SP/EP  
PLAY  
REPEAT  
A-B  
ZOOM  
TITLE  
MODE  
TV  
POWER  
OUTPUT  
SOUND HEARD ON BOTH  
INPUT  
SELECTION SPEAKERS  
STEREO  
L ch  
R ch  
STEREO  
TV VOL  
LEFT CHANNEL AUDIO  
RIGHT CHANNEL AUDIO  
MONO  
TIMER  
TV/VCR  
0
MONO  
PLAY  
STOP  
C
Separate Audio Program (SAP)  
SKIP  
SKIP  
/INDEX  
/INDEX  
Your VCR is fitted with a SAP broadcast system which enables  
you to switch to a separate audio program when viewing a  
selected channel.  
ENTER/  
SELECT  
SET  
SET  
This function applies only when the program is broadcast in  
multi-languages through the SAP broadcast system.  
SET UP  
MENU  
CANCEL  
C
Press SETUP MENU. Then press  
Then press ENTER to select [ON].  
or  
to select SAP.  
1
2
MENU  
TIMER REC SET  
AUTO REPEAT  
SAP  
ON OFF  
ON OFF  
Then press SETUP MENU until  
the menu screen is cleared.  
CH SET UP  
SYSTEM SET UP  
VCR/DVD/TV  
+/-/ENTER/MENU  
NOTES:  
Listening to SAP  
When playing back a tape that is not  
recorded in Hi-Fi stereo mode, the  
audio will automatically be monaural.  
When listening to a VHS Hi-Fi video  
tape or MTS broadcast through the  
VHF/UHF jack (Audio/Video cord not  
connected), the sound will be  
monaural.  
When the VCR is turned on or a channel selection is made, make  
certain the letters "SAP" appears on the screen.This means that the  
"Separate Audio Program" broadcasting is available.  
STEREO SAP  
SAP  
OR  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Duplicating a video tape/Duplicating a disc material onto a video tape  
Duplicating a video tape  
If you connect the VCR to another VCR or camcorder, you can duplicate a previously recorded tape.  
Make all connections before turning on the power.  
Load a blank cassette tape with the erase preven-  
tion tab intact into the recording VCR.  
Load a previously recorded tape into the playback  
VCR or CAMCORDER.  
Press REC on the recordingVCR or on the Remote.  
While holding REC, press PLAY.  
Then press PAUSE.  
1
2
3
4
Press PLAY button on the playback VCR or  
CAMCORDER, then press PAUSE button.  
5
6
Press SP/EP to select the desired tape speed SP  
or EP.  
It is recommended that you set the speed to the  
SP mode on the recording VCR for best results.  
Press PAUSE on both the VCRs simultaneously to  
begin the duplicating process.  
Press VCR CH + or to select AUDIO/VIDEO input  
position. "L" will appear in the  
display.  
Connection with Video camera  
Connection with second Video recorder  
Playback VCR  
Playback Camcorder  
To AV Jack  
To VIDEO OUT  
To AUDIO (R) OUT  
To AUDIO (L) OUT  
Recording VCR  
AUDIO/VIDEO Cord (supplied)  
Recording VCR  
To AUDIO (R) IN  
To AUDIO (L) IN  
AUDIO/VIDEO Cord (not supplied)  
To VIDEO IN  
To AUDIO (R) IN  
To AUDIO (L) IN  
To VIDEO IN  
For duplicating a previously recorded tape from a  
camcorder, follow the camcorder manufacturer’s  
instructions. A typical camcorder dubbing hookup  
is shown above.  
Duplicating a disc material onto a video tape  
You can record disc material in DVD, Video CD, Audio CD, etc. onto a video tape with this DVD/VCR only.  
If the DVD disc has a Copy-guard feature, the duplicating is not possible. A symbol mark “ ” will  
appear on the screen for approx. 4 seconds. See page 37 for more information about the DVD playback.  
Preparation:  
Load a cassette tape with the erase prevention tab  
intact.  
During disc playback, press REC on the VCR or  
while holding REC, press PLAY on the Remote.  
The duplicating will start.  
3
Select the tape speed in the VCR mode. (see P.28)  
Load a disc you wish to duplicate.  
Note:  
Press DVD to select the DVD mode. (The DVD  
indicator will light)  
1
You can set the duplicating time using the ITR-function.  
At step 3 above press REC repeatedly until the desired  
duplicating time appears on the screen.(P.30)  
Press PLAY to start the disc playback.  
2
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc  
This unit applies to DVD discs from Region 1 only.  
The loaded Disc (DVD, Video-CD, Audio-CD and MP3-CD) will be recognized automatically.  
The suitable Disc-formats are: DVD, CD-R and CD-RW.  
Do not play DVD-ROM, DVD-Audio, CDV, CD-G or Photo CD to prevent accidental erasure of prerecorded material.  
Some DVDs are played back with a Copy guard system. In case of a dubbing on video tape, strong disturbance may  
occur. This is not a defect of this DVD/VCR.  
Title  
When two or more movies are recorded on a disc,  
DVD DISC  
the disc is divided into two or more sections. Each  
section is called a “TITLE”.  
TITLE1  
CHAPTER 1  
TITLE2  
CHAPTER 2  
CHAPTER 1  
CHAPTER 2  
CHAPTER 3  
Chapter  
The titles can be subdivided into many sections.  
Each section is called a “CHAPTER”.  
Video-CD/Audio-CD  
Video-CD/Audio-CD-Track  
An Video CD or Audio CD can contain several items.  
These are assigned to the tracks.  
TRACK  
1
TRACK  
2
TRACK  
3
TRACK  
4
TRACK  
5
Removing Disc from Case  
Be sure to hold the edge of disc. Do not touch the surface of the disc.  
Pick up the disc gently from the case.  
• Do not scratch the disc.  
• Do not get dirt on the surface of the disc.  
• Do not stick a label or adhesive tape on the disc.  
• Do not drop or bend the disc.  
Storing Disc  
• Store the disc in the case to avoid risk of scratches, dirt or damage.  
• Do not leave disc exposed to direct sunlight or in hot or humid places.  
Cleaning Disc  
Wipe the disc with a clean, dry cloth from center to edge.  
• Do not wipe the disc round.  
• Do not use liquid or aerosol cleaners.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting setup language  
The setup language can be selected.  
Preparation:  
Turn ON the TV and set it to the video input mode.  
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.  
When using an amplifier, switch on the amplifier.  
POWER  
TV  
VCR  
DVD  
Press DVD to select the DVD  
1
mode. (The DVD indicator will  
light)  
“No Disc” will appear on the  
screen.(IfaDVDdischasalready  
loaded, the playback will start  
automatically.)  
OPEN/  
CLOSE  
DVD MENU  
DISPLAY  
MARKER  
A.TRK  
RETURN  
C.RESET  
ANGLE  
Press SETUP MENU in the stop  
mode. The SETUP MENU of  
DVD will appear on the screen.  
ZERO RETURN  
2
Picture Sound Parental  
Language  
Other  
SEARCH  
MODE  
SUB TITLE  
SP/EP  
PLAY  
REPEAT  
A-B  
ZOOM  
TITLE  
MODE  
Then press  
or  
to select  
Other.  
TV  
POWER  
/Enter/Setup/Return  
INPUT  
Press ENTER to select OSD  
Language.  
Language Picture Sound Parental Other  
OSD Language English  
3
4
TV VOL  
TIMER  
TV/VCR  
0
PLAY  
STOP  
C
/Enter/Setup/Return  
SKIP  
SKIP  
/INDEX  
/INDEX  
Press  
and then press  
or  
Language Picture Sound Parental Other  
to select desired language  
(e.g. English), then press  
ENTER.  
ENTER/  
SELECT  
SET  
SET  
OSD Language English  
English  
Francais  
Espanol  
SET UP  
MENU  
CANCEL  
C
/Enter/Setup/Return  
VCR/DVD/TV  
NOTE: To make the SETUP screen disappear, press SETUP  
MENU (or RETURN).  
If the DVD/VCR does not operate  
properly: Static electricity, etc., may  
affect the player's operation.Disconnect  
the AC power cord once, then connect  
it again.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback procedure  
Preparation:  
Turn ON the TV and set it to the video input mode.  
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.  
Then press DVD to select the DVD mode. (The DVD indicator will light.)  
POWER  
TV  
VCR  
DVD  
Press OPEN/CLOSE.  
1
The disc tray will open.  
Place a disc onto the tray.  
2
OPEN/  
CLOSE  
DVD MENU  
DISPLAY  
MARKER  
A.TRK  
RETURN  
C.RESET  
ANGLE  
Hold the disc, position it with the  
ZERO RETURN  
printed label side up, align it with  
the guides, and place it in its  
proper position.  
SEARCH  
MODE  
SUB TITLE  
SP/EP  
PLAY  
REPEAT  
A-B  
ZOOM  
TITLE  
MODE  
TV  
Press PLAY or OPEN/CLOSE.  
3
POWER  
The disc tray closes automati-  
cally.  
INPUT  
On the screen,  
changes to  
“Reading” and then playback will  
commence.  
TV VOL  
TIMER  
TV/VCR  
0
• A menu screen may appear on  
the TV screen, if the disc has  
a menu feature. In this case,  
PLAY  
Reading  
STOP  
C
press  
,
,
,
or  
ENTER to operate a menu  
feature.  
SKIP  
SKIP  
/INDEX  
/INDEX  
Press STOP to end playback.  
• The DVD/VCR memorizes the stopped point, depending on  
the disc. “ ” appears on the screen for approx. 4 seconds.  
ENTER/  
SELECT  
4
5
SET  
SET  
SET UP  
MENU  
CANCEL  
” keep blinking in the display until the playback is stopped  
C
completely. Press PLAY to resume playback (from the scene  
point).  
• If you press STOP again(“ appears on the screen) or unload  
the disc, the DVD/VCR will clear the stopped point.  
Then press OPEN/CLOSE.  
The disc tray opens.  
Remove the disc and press POWER.  
The disc tray closes automatically and DVD/VCR turns off.  
VCR/DVD/TV  
Notes:  
If a non-compatible disc is loaded, "Incorrect Disc", "Region Code Error" or "Parental Error" will appear on the TV  
screen according to the type of loaded disc. In this case, check your disc again (See pages 35 and 46).  
Some discs may take a minute or so to start playback.  
A “Prohibition” symbol may appear at the upper left of the screen. This symbol means either the feature you  
tried is not available on the disc, or the DVD/VCR can not access the feature at this time. This does not indicate  
a problem with the DVD/VCR.  
When you set a single-faced disc label downwards (ie. the wrong way up) and press PLAY or OPEN/CLOSE,  
"Reading" will appear and remain on the screen for approx. 40 seconds and then it will change to "Incorrect  
Disc".  
Some playback operations of DVDs may be intentionally fixed by software producers. Since this DVD/VCR plays  
DVDs according to the disc contents the software producers designed, some playback features may not be  
available. Also refer to the instructions supplied with the DVDs.  
When playing DTS-encoded Audio CDs, excessive noise will be heard from the analog stereo outputs. To avoid  
possible damage to the audio system, the consumer should take proper precautions when the analog stereo  
outputs of the DVD/VCR are connected to an amplification system.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Special playback  
Note: There may be a slight delay be-  
tween pressing the button and the  
function activation.  
Fast Forward Playback  
Press FF during normal playback.  
Each press of FF will increase the speed of the search  
(x2),  
(x4),  
(x8),  
(x20).  
• To resume normal playback, press PLAY.  
POWER  
TV  
VCR  
DVD  
Review Playback  
Press REW during normal playback.  
Each press of REW will increase the speed of the search  
(x4), (x8), (x20).  
(x2),  
• To resume normal playback, press PLAY.  
OPEN/  
CLOSE  
DVD MENU  
DISPLAY  
MARKER  
A.TRK  
RETURN  
C.RESET  
ANGLE  
ZERO RETURN  
Still Playback  
SEARCH  
MODE  
SUB TITLE  
SP/EP  
Press PAUSE during normal  
PLAY  
REPEAT  
A-B  
ZOOM  
TITLE  
MODE  
playback.  
TV  
POWER  
To resume normal playback, press  
PLAY.  
INPUT  
TV VOL  
TIMER  
TV/VCR  
0
PLAY  
Frame Advance  
Press PAUSE during still playback.  
One frame is advanced each time  
you press PAUSE.  
STOP  
C
SKIP  
SKIP  
/INDEX  
/INDEX  
To resume normal playback, press  
PLAY.  
ENTER/  
SELECT  
SET  
SET  
SET UP  
MENU  
CANCEL  
C
Slow-motion Playback  
Press SLOW during normal playback or still playback.  
Each press of SLOW will change the speed of the slow x1/2, x1/4,  
x1/6, x1/7.  
VCR/DVD/TV  
To resume normal playback, press PLAY.  
To resume the still playback, press PAUSE.  
Note:  
The unit is capable of holding a still video  
image or On screen display image on your  
television screen indefinitely. If you leave  
the still video image or On screen display  
image displayed on your TV for an ex-  
tended period of time, you risk permanent  
damage to your television screen.  
Projection televisions are very susceptible.  
Locating a chapter or track  
Press SKIP (  
) Forward or SKIP (  
) Reverse during play-  
back to locate a chapter that you want to watch.  
Each time you press the button, a chapter or track is skipped.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Zooming / Locating Desired Scene  
Preparation:  
Turn ON the TV and set it to the video input mode.  
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.  
Then press DVD to select the DVD mode. (The DVD indicator will light.)  
Zooming  
POWER  
TV  
VCR  
DVD  
This unit will allow you to zoom in on the frame image. You can  
then make selections by switching the position of the frame.  
Press ZOOM during playback.  
The center part of the image will  
be zoomed in.  
1
1
EachpressofZOOMwillchange  
the ZOOM  
(x 1.3),  
2.0).  
1
OPEN/  
CLOSE  
2 (x 1.5) and  
3 (x  
DVD MENU  
DISPLAY  
MARKER  
A.TRK  
RETURN  
C.RESET  
ANGLE  
ZERO RETURN  
SEARCH  
MODE  
SUB TITLE  
SP/EP  
PLAY  
REPEAT  
A-B  
ZOOM  
TITLE  
MODE  
Press  
/
or  
/
to view a different part of the frame.  
2
3
TV  
You may move the frame from the center position to UP, DOWN,  
LEFT or RIGHT direction.  
POWER  
INPUT  
In the zoom mode press ZOOM repeatedly to return to a 1:1  
view (  
Off).  
TV VOL  
TIMER  
TV/VCR  
0
PLAY  
Locating Desired Scene  
Use the title, chapter and time recorded on the disc to  
locate the desired point to play back.  
STOP  
C
SKIP  
SKIP  
/INDEX  
/INDEX  
To check the title, chapter and time, press OSD. (see page 52)  
ENTER/  
SELECT  
SET  
SET  
Press SEARCH MODE during  
playback or stop mode.  
1
Jump  
Time  
Title  
Chapter  
SET UP  
MENU  
CANCEL  
/Enter/0 9/Cancel/Jump  
C
VCR/DVD/TV  
Press  
or  
to select the “Time”, “Title” or “Chapter”.  
2
3
Press Number keys to change the number.  
• If you input a wrong number, press CANCEL.  
• Refer to the package supplied with the disc to check the  
numbers.  
Notes:  
You can use the Pause, Slow, Search  
or Skip feature in the zoom mode.  
In case of theVideo-CD playback with  
PBC, the SEARCH MODE does not  
work.  
Press ENTER.  
Playback starts.  
4
• When you change the title, playback starts from Chapter 1 of  
the selected title.  
• Some discs may not work in the above operation.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Repeat playback  
Preparation:  
Turn ON the TV and set it to the video input mode.  
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.  
Then press DVD to select the DVD mode. (The DVD indicator will light.)  
Title, Chapter, Track Playback  
POWER  
TV  
VCR  
DVD  
Press PLAY MODE during playback or stop mode.  
1
DVD  
CD  
Repeat  
:
Off  
Play Mode  
Repeat  
:
:
Off  
Off  
/Enter/Play Mode  
/Enter/Play Mode  
OPEN/  
CLOSE  
DVD MENU  
DISPLAY  
MARKER  
A.TRK  
RETURN  
C.RESET  
ANGLE  
ZERO RETURN  
SEARCH  
MODE  
SUB TITLE  
Press ENTER once or twice to select “Chapter” or “Title”.  
SP/EP  
2
3
PLAY  
REPEAT  
A-B  
ZOOM  
TITLE  
MODE  
In case of CD, at first press  
to select “Repeat” and then press  
TV  
ENTER once or twice to select “Track” or “All”.  
POWER  
DVD  
CD  
INPUT  
Repeat  
:
Chapter  
Play Mode  
Repeat  
:
:
Off  
All  
/Enter/Play Mode  
TV VOL  
/Enter/Play Mode  
TIMER  
TV/VCR  
0
PLAY  
Press PLAY MODE again to make the screen disappear.  
STOP  
C
Press PLAY to start Repeat playback.  
To resume normal playback, select Repeat Off.  
SKIP  
SKIP  
/INDEX  
/INDEX  
ENTER/  
SELECT  
SET  
SET  
SET UP  
MENU  
CANCEL  
A-B Repeat Playback  
C
A-B repeat playback allows you to repeat material between two  
selected points.  
Press REPEAT A-B during  
playback.  
The start point is selected.  
1
A
VCR/DVD/TV  
Notes:  
Some discs may not work with the  
repeat operation.  
In A-B repeat mode, subtitles near  
point A or B may not appear.  
During the A-B Repeat Playback the  
ANGLE feature will not operate.  
You may not be able to set A-B Re-  
peat, depending on the scenes of the  
DVD.  
Press REPEAT A-B again.  
The end point is selected.  
Playback starts at the point that  
you selected. Playback stops at  
the end point, returns to Point A  
automatically, then starts again.  
2
A B  
A-B repeat does not work with an in-  
teractive DVD, MP3-CD andVideo-CD  
with PBC.  
To resume normal playback press REPEAT A-B again.  
” appears on the screen.  
Off  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Program playback/Random playback (CD)  
Preparation:  
Turn ON the TV and set it to the video input mode.  
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.  
Then press DVD to select the DVD mode. (The DVD indicator will light.)  
Program playback  
You can arrange the order of tracks on the disc.  
POWER  
TV  
VCR  
DVD  
Press PLAY MODE in the stop  
mode.  
1
Play Mode  
Repeat  
:
:
Off  
Off  
/Enter/Play Mode  
OPEN/  
CLOSE  
DVD MENU  
DISPLAY  
MARKER  
A.TRK  
RETURN  
C.RESET  
ANGLE  
Press ENTER repeatedly until  
the Program table as right  
appears.  
Play Mode  
Repeat  
:
:
Program  
Off  
7
8
9
2
3
ZERO RETURN  
SEARCH  
MODE  
SUB TITLE  
1
2
3
4
5
6
10  
11  
12  
SP/EP  
PLAY  
REPEAT  
A-B  
ZOOM  
TITLE  
MODE  
Clear  
Program Playback  
/Enter/0 9/Cancel/Play Mode  
TV  
POWER  
INPUT  
Example: In case you wish to  
program in order of 7, 3, 11:  
Enter as 7 , 3 , 11.  
Play Mode  
Repeat  
:
:
Program  
Off  
7
8
9
TV VOL  
1 7  
4
10  
11  
12  
TIMER  
TV/VCR  
0
2 3  
3 11  
Clear  
5
6
If you input a wrong number,  
press CANCEL.  
PLAY  
Program Playback  
/Enter/0 9/Cancel/Play Mode  
STOP  
C
Press  
/
or  
/
to select  
4 “Program Playback” and press  
SKIP  
SKIP  
Program Playback  
/INDEX  
/INDEX  
ENTER. “Program Playback” will  
appear on the screen. The  
program you selected will begin  
to playback in the order set.  
ENTER/  
SELECT  
SET  
SET  
SET UP  
MENU  
CANCEL  
Toreturntonormalplayback,select  
“Play Mode: Off” at step 2 above.  
C
Random playback  
VCR/DVD/TV  
Press PLAY MODE in the stop  
1
mode.  
Play Mode  
Repeat  
:
:
Off  
Off  
/Enter/Play Mode  
Notes:  
Tocancelprogramplay, selectClear”  
at step 3 and press ENTER.  
The program is cancelled when you  
openthedisctrayorturnthepoweroff.  
Random playback can not be  
combined with Repeat playback.  
Press  
/
toselectRandom”.  
2
3
Play Mode  
Repeat  
:
:
Random  
Off  
/Enter/Play Mode  
Press PLAY.  
“Random Play” will appear on the screen and Random Playback  
will start.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MP3 Playback  
This player can play back the MP3-data  
which has been recorded on CD-R or CD-  
RW. To produce the MP3-data, you need a  
Windows-PCwithCD-ROMdriveandaMP3-  
encoding Software (not supplied).  
Preparation:  
Turn ON the TV and set it to the video input mode.  
Make sure TV/VCR/DVD switch has been slided to VCR/  
DVD. Then press DVD to select the DVD mode. (The DVD  
indicator will light.)  
The Apple-HFS-System can not be played.  
Press OPEN/CLOSE.  
1
The disc tray will open.  
Place a disc onto the tray.  
MP3 CD Information  
Limitations on MP3 CD playback  
• MP3 CD is the disc that is standardized by  
ISO9660, its file name must include 3-digits  
extension letters, “mp3”.  
• The directory and file names of the MP3  
CD must be correspond to the ISO  
standardized files.  
• This unit can read 200 files per disc. If  
one directory has more than 200 files, it  
reads up to 200 files, the remaining files will  
be omitted.  
• As for multi-session disc, only the first  
session can be played.  
Press PLAY or OPEN/CLOSE.  
The disc tray closes automatically.  
On the TV-screen, “Reading” and  
then reading file number will  
appear.Reading will take as much  
time as the number of file.  
Reading  
MP3 15  
2
A MP3 menu screen will appear  
on the TV screen.  
Jazz  
3
Track 1/12  
01:28  
Japan  
1
Pops  
1
2
3
4
Japan  
Bay Bridge  
6
7
8
9
BLUE EYES  
Blurry Eyes  
Press  
folder.  
/
or ENTER to select  
• If the CD has both audio tracks and MP3  
files, only audio tracks are played.  
• It may take more than one minute for this  
unit to read MP3 files depending on its  
structure.  
CLOSE MY EYES  
DIVE TO BLUE  
flower  
Lies and Truth-  
5
Honey  
10 winter fall  
/0-9/Enter/Play Mode  
• Music recorded by “Joliet Recording  
Specification” can be played back, the file  
name is displayed (within 17 letters) on the  
screen Long file names will be condensed.  
• The music files recorded by “Hierarchical  
File System” (HFS) cannot be played.  
Press  
/
or  
/
or Number keys to select the desired  
4
track, then press ENTER. Track is selected and play  
commences.  
• In case the folder includes more than 11 tracks, press  
or  
to display next track list.  
Limitations on display  
• The maximum number for display is 17  
letters. Available letters for display are the  
following: capital or small alphabets of A  
through Z, numbers of 0 through 9, and _  
(under score).  
• Other letters than those above are replaced  
in hyphen.  
Press STOP to end playback.  
5
6
• The unit records the stopped point. “ ” appears on the  
screen. Press PLAY to resume playback (from the scene  
point).  
• If you press STOP again or unload the disc, the unit will  
clear the stopped point.  
Notes on MP3 files  
To play back MP3 CD in the recorded order,  
1. Use MP3 software that records data  
alphabetically or numerically.  
2. Name each file including two-digit or three-  
digit number (e.g. "01" "02" or "001" "002").  
3. Refrain from making too many sub-folders.  
Then press OPEN/CLOSE.  
The disc tray opens.  
Remove the disc and press POWER.  
The disc tray closes automatically and DVD/VCR turns off.  
CAUTION:  
• Some MP3 CDs can not be played back  
depending on the recording conditions.  
• The CD-R/RW that has no music data or  
non-MP3 files can not be played back.  
Notes:  
During MP3-Playback, you can not use SEARCH, A-B  
Repeat functions.  
You can use Repeat (Track or All), Random functions and  
Program playback for MP3 CD Playback. (See page 40 and 41)  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Marking Desired Scenes  
The unit stores the points that you  
want to watch again up to 3 points.  
You can resume playback from  
each scene.  
Preparation:  
Turn ON the TV and set it to the video input mode.  
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.  
Then press DVD to select the DVD mode. (The DVD indicator will light.)  
Marking the Scenes  
POWER  
TV  
VCR  
DVD  
Press MARKER during  
playback.  
1
Marker  
Marker  
Marker  
1
2
3
/Enter/Cancel/Marker  
OPEN/  
CLOSE  
DVD MENU  
DISPLAY  
MARKER  
A.TRK  
RETURN  
C.RESET  
ANGLE  
Select the blank Marker using  
ZERO RETURN  
2
3
Marker  
Marker  
Marker  
1
2
3
00 27 54  
/
.
SEARCH  
MODE  
SUB TITLE  
ThenpressENTERatthedesired  
scene.  
SP/EP  
PLAY  
/Enter/Cancel/Marker  
REPEAT  
A-B  
ZOOM  
TITLE  
MODE  
TV  
• Repeat this procedure to set  
the other 2 scenes.  
POWER  
INPUT  
Press MARKER to remove this display.  
TV VOL  
TIMER  
TV/VCR  
0
PLAY  
Returning to the Scenes  
PressMARKERduringplayback  
or stop mode.  
1
Marker  
Marker  
Marker  
1
2
3
00 27 54  
01  
02  
STOP  
C
16 25  
08 31  
/Enter/Cancel/Marker  
SKIP  
SKIP  
/INDEX  
/INDEX  
ENTER/  
SELECT  
SET  
SET  
SET UP  
MENU  
CANCEL  
Press  
1-3.  
/
to select the Marker  
2
3
Marker  
Marker  
Marker  
1
2
3
00 27 54  
01  
02  
C
16 25  
08 31  
/Enter/Cancel/Marker  
VCR/DVD/TV  
Press ENTER.  
Playback starts from the marked scene.  
Notes:  
Some discs may not work with the  
marking operation.  
The marking is canceled when you  
open the disc tray or turn the power off.  
Some subtitles recorded around the  
marker may fail to appear.  
WhiletheMARKERscreenisdisplayed,  
ifyoudoaspecialplaybackastheFast  
Forward/Review Playback  
or SKIP, the MARKER screen will  
disappear. Press MARKER again as  
soon as you find the desired scene.  
To Cancel the Mark  
Press MARKER.  
1
2
3
Press  
/
to select the Marker 1-3.  
Press CANCEL.  
To remove this display, press MARKER.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing soundtrack language / Subtitles  
Preparation:  
Turn ON the TV and set it to the video input mode.  
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.  
Then press DVD to select the DVD mode. (The DVD indicator will light.)  
OPEN/  
DVD MENU  
DISPLAY  
MARKER  
A.TRK  
RETURN  
C.RESET  
ANGLE  
CLOSE  
ZERO RETURN  
SEARCH  
MODE  
SUB TITLE  
SP/EP  
Changing soundtrack language  
PLAY  
REPEAT  
A-B  
ZOOM  
TITLE  
MODE  
You can select the language when you play a multilingual disc.  
TV  
POWER  
Press A.MONITOR during  
playback.  
Thecurrentsoundtracklanguage  
will appear.  
1
INPUT  
TV VOL  
TIMER  
TV/VCR  
0
PLAY  
Press A.MONITOR repeatedly  
2
STOP  
C
until the desired language is  
selected.  
The on-screen display will  
disappear after a few seconds.  
SKIP  
SKIP  
/INDEX  
/INDEX  
ENTER/  
SELECT  
SET  
SET  
SET UP  
MENU  
CANCEL  
In case of VIDEO CD playback  
C
AudiotypechangesasfollowseachtimeyoupressA.MONITOR.  
LR  
L
R
VCR/DVD/TV  
Turning the Subtitles On and Off  
When playing back a disc recorded with subtitles, you can turn  
the subtitles on or off.  
Notes:  
Press SUB TITLE during playback  
until “OFF” appears.  
If the desired language is not heard  
after pressing the button several times,  
the language is not recorded on the disc.  
Changing soundtrack or subtitle  
language is cancelled when you open  
the disc tray or turn the power off. The  
initial default language or available  
language will be heard and seen if the  
disc is played back again.  
Off  
Changing the subtitle language  
Depending on the DVD you may be  
unable to turn on, turn off, or change the  
subtitles, even if they are recorded on  
the disc. While playing the DVD, the  
subtitle may change while opening or  
closing the disc tray, or while changing  
the title.  
In some cases, the subtitle language is  
not changed to the selected one  
immediately.  
You can select the language when playing back a disc  
recorded with multi-lingual subtitles.  
Press SUB TITLE repeatedly during  
playbackuntilyourdesiredlanguage  
appears.  
The on-screen display will disappear  
after a few seconds.  
1/32 Eng  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing angles / Title selection / DVD menu  
Preparation:  
Turn ON the TV and set it to the video input mode.  
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.  
Then press DVD to select the DVD mode. (The DVD indicator will light.)  
Changing Angles  
POWER  
TV  
VCR  
DVD  
When playing back a disc recorded with multi-angle facility, you  
can change the angle that you are viewing the scene from.  
Press ANGLE during playback.  
The current angle will appear.  
1
1/9  
OPEN/  
CLOSE  
DVD MENU  
DISPLAY  
MARKER  
A.TRK  
RETURN  
C.RESET  
ANGLE  
ZERO RETURN  
SEARCH  
MODE  
SUB TITLE  
SP/EP  
PLAY  
REPEAT  
A-B  
ZOOM  
TITLE  
MODE  
Press ANGLE repeatedly until the desired angle is selected.  
2
TV  
POWER  
INPUT  
Title Selection  
Two or more titles are recorded on some discs. If the title menu  
TV VOL  
TIMER  
TV/VCR  
0
is recorded on the disc, you can select the desired title.  
PLAY  
Press TITLE during playback.  
1
Title menu appears on the screen.  
STOP  
C
• Press TITLE again to resume playback at the scene when you  
pressed TITLE.  
SKIP  
SKIP  
/INDEX  
/INDEX  
Press  
/
or  
/
to select the desired title.  
2
3
ENTER/  
SELECT  
SET  
SET  
Press ENTER or PLAY.  
The playback of the selected title will start.  
SET UP  
MENU  
CANCEL  
C
DVD Menu  
Some DVDs allow you to select the disc contents using the  
menu.  
VCR/DVD/TV  
When you play back these DVDs, you can select the subtitle  
language and sound-track language,etc. using the DVD menu.  
Press DVD MENU during playback.  
1
Note:  
The DVD menu appears on the screen.  
Depending on the DVD, you may not  
be able to change the angles even if  
multi-angles are recorded on the disc,  
or you may be unable to select the title,  
and a "title menu" may simply be called  
a "menu" or "title" in the instructions  
supplied with the disc.  
• Press DVD MENU again to resume playback at  
the scene when you pressed DVD MENU.  
Press  
/
or  
/
to select the desired item.  
2
3
Press ENTER.  
The menu continues to another screen. Repeat steps 2 and 3 to  
set the item completely.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parental control  
Somediscsarespecifiednotsuitable  
for children. Such discs can be  
prevented from play back with the  
unit.  
Preparation:  
Turn ON the TV and set to the video input mode.  
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.  
Then press DVD to select the DVD mode. (The DVD indicator will light.)  
Parental control setting  
POWER  
TV  
VCR  
DVD  
Press SETUP MENU in the stop mode.  
Press or to select “Parental”.  
Then press ENTER.  
Language Picture Sound Parental Other  
1
Password  
Parental  
Off  
0
9/Cancel  
/Enter/Setup/Return  
Press  
or  
to select “Parental Off”,  
Language Picture Sound Parental Other  
Password  
2
3
OPEN/  
CLOSE  
then press ENTER until the level you  
desire appears (e.g.: 1).  
DVD MENU  
DISPLAY  
MARKER  
A.TRK  
RETURN  
C.RESET  
ANGLE  
Parental  
1
ZERO RETURN  
SEARCH  
MODE  
SUB TITLE  
SP/EP  
PLAY  
REPEAT  
A-B  
ZOOM  
TITLE  
MODE  
/Enter/Setup/Return  
TV  
POWER  
Press  
once to select “Password  
”.  
Then press Number keys to input a 4-  
digit password (e.g.: 1234).  
Language Picture Sound Parental Other  
INPUT  
Password  
Parental  
1234  
1
• If you input a wrong number, press  
CANCEL.  
• Be sure to remember this number!  
TV VOL  
0
9/Cancel  
TIMER  
TV/VCR  
0
/Enter/Setup/Return  
PLAY  
Level Off : The parental control setting does not function.  
Level 1  
Level 8  
: DVD software for adults cannot be played back.  
: All DVD software can be played back.  
STOP  
C
Select from level 1 to level 8.  
On a scale of 1-8, "1" is the most restrictive.  
SKIP  
SKIP  
/INDEX  
/INDEX  
Press ENTER.  
Language Picture Sound Parental Other  
Password  
4
5
ENTER/  
SELECT  
SET  
SET  
change to  
.
1234  
Parental  
1
SET UP  
MENU  
CANCEL  
C
0
9/Cancel  
/Enter/Setup/Return  
To make SETUP screen disappear, press SETUP MENU.  
Notes:  
To unlock the Parental Control Setting  
Cancel the password so as to set the Parental level freely again,  
• If each setup (page 46~52) has been  
completed, the unit can always be  
worked under the same conditions  
(especially with DVD discs).  
Each setup will be retained in the  
memory if you turn the power off.  
Depending on the discs, the unit can-  
not limit playback.  
Some discs may not be encoded with  
specific rating level information though  
its disc jacket says "adult". For those  
discs, the age restriction will not work.  
Do not forget the password. If you forget  
the password, contact customer service.  
Select “Password  
and press Number keys to input your  
4-digit password.  
” (step 1)  
1
2
Language Picture Sound Parental Other  
Password  
Parental  
1234  
1
Then press ENTER.  
0
9/Cancel  
/Enter/Setup/Return  
If the input password was right,  
will appear.  
You can move to “Parental 1”(e.g.) to  
input the desired level or to cancel  
parental control.  
Language Picture Sound Parental Other  
Password  
Parental  
1
0
9/Cancel  
/Enter/Setup/Return  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Temporary disabling of rating level by DVD disc  
Depending on the DVD disc, the  
Preparation:  
disc may try to temporarily cancel  
the rating level that you have set.  
It is up to you to decide whether to  
cancel the rating level or not.  
Turn ON the TV and set to the video input mode.  
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.  
Then press DVD to select the DVD mode. (The DVD indicator will light.)  
LoadaDVDdiscandpressPLAY  
1
or OPEN/CLOSE (see page 37).  
POWER  
TV  
VCR  
DVD  
If the DVD disc has been designed to temporarily cancel the  
2
Rating level, the screen which follows the “Reading” screen will  
change, depending on which disc is played. If you select “YES”  
with ENTER key, “Your disc exceeds the parental control level  
1.”(e.g.) screen will then appear.  
OPEN/  
CLOSE  
DVD MENU  
DISPLAY  
MARKER  
A.TRK  
RETURN  
C.RESET  
ANGLE  
ZERO RETURN  
SEARCH  
MODE  
SUB TITLE  
SP/EP  
PLAY  
REPEAT  
A-B  
ZOOM  
TITLE  
MODE  
Your disc exceeds  
the parental control level 1.  
TV  
POWER  
Parental Control Level  
Cancel Picture  
INPUT  
/Enter/Return  
TV VOL  
TIMER  
TV/VCR  
0
If you wish to cancel the set rating level temporarily, select  
PLAY  
3
“Parental Control Level” with  
or  
, then press ENTER. If  
the 4-digits password at step 3 on page 46 has been set, the  
password entering screen will appear as shown in step 4 below.  
Alternatively, if the password has not been set, playback will  
commence. If you don’t know (or have forgotten) the password,  
select “Cancel Picture”.  
STOP  
C
SKIP  
SKIP  
/INDEX  
/INDEX  
The setting screen will disappear. Press OPEN/CLOSE to  
remove the disc.  
ENTER/  
SELECT  
SET  
SET  
SET UP  
MENU  
CANCEL  
Enter the password with  
Number buttons (0-9).  
Then press ENTER.  
C
4
5
Please enter the  
digit password  
4
Enter/0 9/Cancel/Return  
If you interrupt the entering,  
press RETURN.  
VCR/DVD/TV  
Playback will commence if the entered password was correct.  
Note:  
This temporary cancellation of rating  
level will be kept until the disc is ejected.  
When the disc is ejected, the original  
rating level will be set again  
automatically.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting menu language  
You can select the language of the  
Preparation:  
disc menu messages of DVDs.  
Turn ON the TV and set to the video input mode.  
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.  
Then press DVD to select the DVD mode. (The DVD indicator will light.)  
Press SETUP MENU in the stop  
mode.  
Language Picture Sound Parental Other  
1
POWER  
TV  
VCR  
DVD  
Press  
or  
to select  
“Language”.  
/Enter/Setup/Return  
Press ENTER.  
Then press  
“Menu”.  
OPEN/  
CLOSE  
DVD MENU  
DISPLAY  
MARKER  
A.TRK  
RETURN  
C.RESET  
ANGLE  
2
3
Language Picture Sound Parental Other  
or  
to select  
ZERO RETURN  
Menu  
Subtitle  
Audio  
English  
Automatic  
English  
SEARCH  
MODE  
SUB TITLE  
SP/EP  
PLAY  
REPEAT  
A-B  
ZOOM  
TITLE  
MODE  
TV  
/Enter/Setup/Return  
POWER  
INPUT  
Press ENTER.  
Language Picture Sound Parental Other  
Press  
or  
to select your  
Menu  
Subtitle  
Audio  
English  
Automatic  
English  
English  
Francais  
Espanol  
Other  
TV VOL  
desired language, then press  
ENTER.  
TIMER  
TV/VCR  
0
PLAY  
0
9/Cancel  
/Enter/Setup/Return  
STOP  
C
English, Francais, Espanol  
The selected language is the first-priority Menu language.  
SKIP  
SKIP  
/INDEX  
/INDEX  
OTHER: Other language can be selected (See the Language  
ENTER/  
SELECT  
SET  
SET  
Code List on page 54).  
SET UP  
MENU  
CANCEL  
To make SETUP screen disappear, press SETUP MENU.  
C
4
VCR/DVD/TV  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting subtitle language  
The same subtitle language can  
always be selected even if you replace  
the disc or turn the power off.  
Preparation:  
Turn ON the TV and set to the video input mode.  
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.  
Then press DVD to select the DVD mode. (The DVD indicator will light.)  
Press SETUP MENU in the stop  
mode.  
1
2
3
Language Picture Sound Parental Other  
POWER  
TV  
VCR  
DVD  
Press  
or  
to select  
“Language”  
/Enter/Setup/Return  
OPEN/  
CLOSE  
Press ENTER.  
DVD MENU  
DISPLAY  
MARKER  
A.TRK  
RETURN  
C.RESET  
ANGLE  
Language Picture Sound Parental Other  
ZERO RETURN  
Then press  
“Subtitle”.  
or  
to select  
Menu  
Subtitle  
Audio  
English  
Automatic  
English  
SEARCH  
MODE  
SUB TITLE  
SP/EP  
PLAY  
REPEAT  
A-B  
ZOOM  
TITLE  
MODE  
TV  
POWER  
/Enter/Setup/Return  
INPUT  
Press ENTER.  
Language Picture Sound Parental Other  
Press  
or  
to select your  
TV VOL  
Menu  
Subtitle  
Audio  
English  
Automatic  
English  
English  
Francais  
Espanol  
Other  
TIMER  
desired language, then press  
ENTER.  
TV/VCR  
0
PLAY  
0
9/Cancel  
Automatic  
Off  
/Enter/Setup/Return  
STOP  
C
English, Francais, Espanol  
SKIP  
SKIP  
/INDEX  
/INDEX  
The subtitle is displayed with the selected language if it is  
recorded on the disc.  
ENTER/  
SELECT  
SET  
SET  
OTHER:  
SET UP  
MENU  
CANCEL  
If you want to select another language, enter the language code  
(see the language code list on page 54).  
C
AUTOMATIC:  
The unit will automatically select the same language in the  
AUDIO setting.  
When the unit selects the same language as the AUDIO, the  
subtitles will not appear during playback.  
VCR/DVD/TV  
When you do not use the same language as the AUDIO, the  
subtitles will appear during playback.  
Off:  
Note:  
Subtitles do not appear.  
If the selected language is not recorded  
on the disc, the first-priority language is  
selected.  
To make SETUP screen disappear, press SETUP MENU.  
4
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting audio soundtrack language / Setting surround sound  
Preparation:  
Turn ON the TV and set to the video input mode.  
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.  
Then press DVD to select the DVD mode. (The DVD indicator will light.)  
Setting audio soundtrack  
language  
Thesameaudiosoundtracklanguage  
can always be selected by your unit  
even if you replace the disc or turn  
Press SETUP MENU in the stop  
mode.  
Press or toselectLanguage”  
Language Picture Sound Parental Other  
the power off.  
1
/Enter/Setup/Return  
Press ENTER.  
Then press  
“Audio”.  
2
3
Language Picture Sound Parental Other  
or  
to select  
Menu  
Subtitle  
Audio  
English  
English  
English  
OPEN/  
CLOSE  
DVD MENU  
DISPLAY  
MARKER  
A.TRK  
RETURN  
C.RESET  
ANGLE  
ZERO RETURN  
SEARCH  
MODE  
SUB TITLE  
SP/EP  
PLAY  
REPEAT  
A-B  
ZOOM  
TITLE  
MODE  
/Enter/Setup/Return  
TV  
Press ENTER.  
POWER  
Language Picture Sound Parental Other  
Press  
or  
to select your  
Menu  
Subtitle  
Audio  
English  
English  
English  
English  
Francais  
Espanol  
Other  
INPUT  
desired Audio Language, then  
press ENTER.  
0
9/Cancel  
Original  
TV VOL  
/Enter/Setup/Return  
TIMER  
TV/VCR  
0
PLAY  
• English, Francais, Espanol:  
The language you have selected will play if it is recorded on  
the disc.  
STOP  
C
• OTHER: If you want to select another language,  
enter the language code (See the Language Code List on page  
54).  
SKIP  
SKIP  
/INDEX  
/INDEX  
• ORIGINAL: The unit will select the first priority language of  
each disc.  
ENTER/  
SELECT  
SET  
SET  
SET UP  
MENU  
To make SETUP screen disappear, press SETUP MENU.  
CANCEL  
4
C
Setting surround sound  
This DVD/VCR equipped with a “SPATIALIZER N-2-2”. It can  
produce the effect of being in a cinema or a concert hall.  
VCR/DVD/TV  
During disc playback press A. MONITOR.  
1
2
Press  
to select [On].  
2/8 Fra DolbyDigital  
Spatializer On  
Notes:  
If the selected language is not  
recorded on the disc, the original  
language will be heard.  
The “SPATIALIZER N-2-2” is effective  
only for the sound of disc.  
To cancel Surround mode:  
Follow the right steps 1~2, then press  
ENTER to select the [Off] position.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the aspect ratio of TV screen  
You can select the aspect ratio for  
Preparation:  
your TV.  
Turn ON the TV and set to the video input mode.  
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.  
Then press DVD to select the DVD mode. (The DVD indicator will light.)  
Press SETUP MENU in the stop  
mode.  
Press or toselectPicture”.  
1
Language Picture Sound Parental Other  
POWER  
TV  
VCR  
DVD  
/Enter/Setup/Return  
OPEN/  
CLOSE  
Press ENTER, then press  
or  
DVD MENU  
MARKER  
A.TRK  
RETURN  
C.RESET  
ANGLE  
2
3
Language Picture Sound Parental Other  
to select “Tv Screen”.  
DISPLAY  
ZERO RETURN  
Tv Screen  
Display  
4:3  
On  
SEARCH  
MODE  
SUB TITLE  
SP/EP  
PLAY  
REPEAT  
A-B  
ZOOM  
TITLE  
MODE  
TV  
POWER  
/Enter/Setup/Return  
INPUT  
Press ENTER.  
Language Picture Sound Parental Other  
Press  
or  
to select your  
TV VOL  
Tv Screen  
Display  
4:3  
On  
4:3  
4:3  
desired screen type, then press  
ENTER.  
TIMER  
TV/VCR  
0
16:9  
PLAY  
/Enter/Setup/Return  
STOP  
C
You have the following screen sizes to choose from:  
4:3 NORMAL TV  
SKIP  
SKIP  
/INDEX  
/INDEX  
Select this mode when connecting to a conventional TV. When  
playing back a wide screen-DVD disc, it displays the wide picture  
with black bands at the top and bottom of screen.  
ENTER/  
SELECT  
SET  
SET  
SET UP  
MENU  
CANCEL  
C
4:3  
PAN SCAN  
It displays the wide picture on the whole screen with left and  
right edges automatically cut off.  
16:9  
WIDE SCREEN  
VCR/DVD/TV  
Select this mode when connecting to a wide-screen TV.  
A wide screen picture is displayed full size.  
To make SETUP screen disappear, press SETUP MENU.  
Note:  
4
If the DVD disc is not formatted in the pan  
& scan style, it displays 4:3 style.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting on Screen display / Status display of Disc  
On screen display can be switched on  
Preparation:  
or off when you press the buttons.  
Turn ON the TV and set to the video input mode.  
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.  
Then press DVD to select the DVD mode. (The DVD indicator will light.)  
Press SETUP MENU in the stop  
mode.  
1
Language Picture Sound Parental Other  
POWER  
TV  
VCR  
DVD  
Press  
or  
to select “Picture”  
/Enter/Setup/Return  
Press ENTER, then press  
or  
Language Picture Sound Parental Other  
2 to select “Display”.  
Tv Screen  
Display  
4:3  
On  
OPEN/  
CLOSE  
DVD MENU  
DISPLAY  
MARKER  
A.TRK  
RETURN  
C.RESET  
ANGLE  
ZERO RETURN  
SEARCH  
MODE  
SUB TITLE  
SP/EP  
PLAY  
REPEAT  
A-B  
ZOOM  
TITLE  
MODE  
/Enter/Setup/Return  
TV  
POWER  
Press ENTER to select “On” or  
“Off”.  
Language Picture Sound Parental Other  
3
Tv Screen  
Display  
4:3  
Off  
INPUT  
TV VOL  
TIMER  
TV/VCR  
0
/Enter/Setup/Return  
PLAY  
On: On screen displays appears when you press the any  
buttons (factory setting).  
STOP  
C
Off: On screen displays do not appear when you press any  
buttons except SETUP MENU, SEARCH MODE, PLAY  
MODE, MARKER and OSD.  
SKIP  
SKIP  
/INDEX  
/INDEX  
To make SETUP screen disappear, press SETUP MENU.  
4
ENTER/  
SELECT  
SET  
SET  
SET UP  
MENU  
CANCEL  
Status display of Disc  
Each press of OSD, the status display of the disc will appear on the  
C
screen and change as follows.  
DVD  
00:34:56 01:12:33  
00:34:56 01:12:33  
1/99 Chapter 1/999  
1/9  
Title  
1/8 Eng Dolby Digital  
1/32 Eng  
VCR/DVD/TV  
To make status display disappear, press OSD again.  
VIDEO  
CD  
AUDIO  
CD  
34:56  
71:33  
Track 11/99  
When you playback the CD disc, the status display will appear on  
the screen and continue displaying.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dynamic Range Control  
Preparation:  
Turn ON the TV and set to the video input mode.  
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.  
Then press DVD to select the DVD mode. (The DVD indicator will light.)  
DRC(DynamicRangeControl)enables  
you to control the dynamic range so  
as to achieve a suitable sound for  
your equipment.  
Press SETUP MENU in the stop mode.  
1
POWER  
TV  
Press  
or  
to select  
VCR  
DVD  
“Sound”.  
Language Picture Sound Parental Other  
/Enter/Setup/Return  
OPEN/  
CLOSE  
DVD MENU  
DISPLAY  
MARKER  
A.TRK  
RETURN  
C.RESET  
ANGLE  
ZERO RETURN  
Press  
select “DRC”.  
or ENTER to  
2
3
Langue Image Son Parental Autres  
SEARCH  
MODE  
SUB TITLE  
DRC  
Std  
SP/EP  
PLAY  
REPEAT  
A-B  
ZOOM  
TITLE  
MODE  
TV  
POWER  
/Enter/Setup/Return  
INPUT  
Press  
press  
desired setting.  
or ENTER, then  
or to select  
TV VOL  
Language Picture Sound Parental Other  
TIMER  
TV/VCR  
0
Max  
Std  
Min  
DRC  
Std  
PLAY  
STOP  
C
/Enter/Setup/Return  
SKIP  
SKIP  
/INDEX  
/INDEX  
Max: Full dynamic range is increased.  
Std: Full dynamic range is maintained.  
Min: Dynamic range is reduced.  
ENTER/  
SELECT  
SET  
SET  
SET UP  
MENU  
CANCEL  
C
VCR/DVD/TV  
Notes:  
• This function works only during playback  
of Dolby Digital recorded discs.  
• The level of Dynamic Range Reduction may  
differ depending on DVD video disc.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Language Code List  
Enter the appropriate code number for the initial settings "Audio", "Subtitle" and/or "Menu" (see pages 48-  
50).  
Language Name Code Language Name Code Language Name Code Language Name Code  
Abkhazian  
Afar  
1112 Fiji  
1620 Lingala  
1619 Lithuanian  
1628 Macedonian  
1635 Malagasy  
1722 Malay  
2224 Singhalese 2919  
1111 Finnish  
1116 French  
2927 Frisian  
1123 Galician  
1128 Georgian  
1835 German  
1129 Greek  
1135 Greenlandic  
1136 Guarani  
1211 Gujarati  
1531 Hausa  
2230 Slovak  
2321 Slovenian  
2317 Somali  
2329 Spanish  
2921  
2922  
2925  
1529  
Afrikaans  
Albanian  
Amharic  
Arabic  
2111 Malayalam  
1415 Maltese  
1522 Maori  
2322 Sundanese 2931  
Armenian  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
2330 Swahili  
2319 Swedish  
2328 Tagalog  
2325 Tajik  
2933  
2932  
3022  
3017  
3011  
3030  
3015  
3018  
1225  
3019  
3025  
3028  
3021  
3033  
3121  
3128  
3136  
2122 Marathi  
1724 Moldavian  
1731 Mongolian  
1811 Nauru  
2324 Tamil  
Basque  
2411 Tatar  
Bengali; Bangla 1224 Hebrew  
1933 Nepali  
2415 Telugu  
2425 Thai  
Bhutani  
Bihari  
1436 Hindi  
1819 Norwegian  
1831 Oriya  
1218 Hungarian  
1228 Icelandic  
1217 Indonesian  
2335 Interlingua  
1215 Irish  
2528 Tibetan  
2611 Tigrinya  
2629 Tonga  
1611 Turkish  
2622 Turkmen  
2630 Twi  
Breton  
1929 Panjabi  
1924 Pashto, Pushto  
1911 Persian  
1711 Polish  
Bulgarian  
Burmese  
Byelorussian  
Cambodian  
Catalan  
Chinese  
Corsican  
Croatian  
Czech  
2123 Italian  
1930 Portuguese  
2011 Quechua  
1311 Japanese  
3618 Javanese  
1325 Kannada  
1828 Kashmiri  
1329 Kazakh  
1411 Kirghiz  
2422 Korean  
1524 Kurdish  
1525 Laothian  
1530 Latin  
2731 Ukrainian  
2033 Rhaeto-Romance 2823 Urdu  
2124 Romanian  
2129 Russian  
2121 Samoan  
2135 Sanskrit  
2125 Scots Gaelic  
2131 Serbian  
2825 Uzbek  
2831 Vietnamese 3219  
2923 Volapük  
2911 Welsh  
1714 Wolof  
2928 Xhosa  
2918 Yiddish  
2924 Yoruba  
2914 Zulu  
3225  
1335  
3325  
3418  
2019  
3525  
3631  
Danish  
Dutch  
English  
Esperanto  
Estonian  
Faroese  
2225 Serbo-Croatian  
2211 Shona  
1625 Latvian, Lettish 2232 Sindhi  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problems and troubleshooting  
Use the following check list for troubleshooting when you have problems with your unit. Consult your local  
dealer or service outlet if problems persist.  
Be sure all connections are properly made when using with other units.  
SYMPTOMS  
DVD/VCR  
POSSIBLE SOLUTIONS  
PAGE  
Make sure the power cord is plugged in.  
Try another AC outlet.  
5
Power is off, check fuse or circuit breaker.  
Unplug unit, then plug it back in.  
5
DVD/VCR does not operate.  
Select the DVD or VCR mode before operating.  
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.  
18,36  
18,36  
Antenna connection is not correct or antenna cable is disconnected.  
12~15  
18  
• The video channel is not in the correct position or the TV is not  
set to the video channel 3 or 4.  
• Check the unit is connected correctly.  
• The video input selector of the TV is not set to VIDEO. Set to  
VIDEO (or equivalent).  
12~17  
No picture.  
No sound.  
• Channel is set to the external mode.  
• Check the unit is connected correctly.  
• Check the input selector of the amplifier is set properly.  
• The unit is in the Special playback mode.  
12~17  
26,38  
• Aim the remote control at the remote sensor.  
• Operate within Approx. 5 Meters or reduce the light in the room.  
• Clear the path of the beam.  
• The batteries are weak. Replace the batteries.  
• Check the batteries are inserted correctly.  
• Check the frequency code is set correctly.  
The remote control does not  
function.  
11  
The DVD-keys on the RCU of the  
other JVC RECEIVER/TV is not  
effective.  
This is not a defect. Since this unit is combined type of DVD  
and VCR, the remote code of DVD is individual.  
10  
14,15  
23  
Check all CATV connections.  
Station or CATV system problems, try another station.  
No CATV reception  
During the Auto Clock operation, a video signal can be put out.  
Please set the clock with Manual clock setting or wait until the  
Auto Clock operation completed.  
No POWER but a picture appears  
on the TV screen.  
VCR  
The erase prevention tab of the video cassette is broken off.  
The unit is in the external input mode.  
TV recording does not work.  
24,28  
• The time is not set correctly.  
• The recording start/end time is not set correctly.  
• The TIMER has not been pressed ( is not lit).  
21,23  
31  
31  
Timer recording does not work.  
Tracking adjustment beyond range of automatic tracking circuit.  
Try Manual tracking adjustment.  
• Video heads are dirty.  
26  
Noise bars on screen.  
56  
• The tape is worn or damaged.  
DVD  
Display is not shown in your  
language.  
Select proper language in the menu options.  
36  
• No disc is inserted.  
• The disc may be dirty. Clean up the disc.  
• The unit cannot play DVD-ROMs, etc.  
37  
35  
35  
Playback doesn’t start.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problems and troubleshooting / Video head cleaning  
SYMPTOMS  
POSSIBLE SOLUTIONS  
PAGE  
Stopping playback, search, slow-  
motion play, repeat play, or program  
play, etc. cannot be performed.  
• Some discs may not do some of the functions.  
No 4:3 (16:9) picture  
No on-screen display  
No surround sound  
• The setup does not match your TV.  
• Select Display On.  
51  
52  
17  
• The setup does not match your stereo system.  
The unit or remote operation key  
is not functioning.  
Turn off the unit and unplug the AC power cord for several  
minutes, then replug it.  
Playback does not start when the  
title is selected.  
• Check the Parental setup.  
46  
Audio soundtrack and/or subtitle  
language is not changed when you  
play back a DVD.  
49,50  
49  
• Multilingual language is not recorded on the DVD disc.  
• Some discs have no subtitles.  
• Subtitles are cleared. Press SUB TITLE.  
No subtitle  
Angle cannot be changed.  
appears on the screen.  
• Multi-angles are not recorded on the DVD disc.  
• The function is prohibited with the unit or the disc.  
45  
Video head cleaning  
Video head clogging  
The video heads are the means by which the DVD/VCR reads  
the picture from the tape during playback. In the unlikely event  
that the heads become dirty enough to be clogged, no picture  
will be played back. This can easily be determined if, during  
playback of a known good tape, there is good sound, but no  
picture (picture is extremely snowy). If this is the case, have  
the DVD/VCR checked by qualified service personnel.  
Good Picture  
Snowy Picture  
NOTES: DO NOT ATTEMPT TO CLEAN THE VIDEO HEADS OR SERVICE THE UNIT BY REMOVING THE  
REAR COVER.  
Video heads may eventually wear out and should be replaced when they fail to produce clear pictures.  
To help prevent video head clogging, use only good quality VHS tapes. Discard worn out tapes.  
Notes  
Auto Clock Setting  
Notes for Canadian customers regarding the clock feature of your DVD/VCR.  
The XDS signals are carried only by certain broadcast television stations (for example, the signal is carried by  
most Public Broadcasting Service stations).You must be able to receive a station carrying the XDS signal to  
use the Auto Clock Setting to set your DVD/VCR’s internal clock. If you live in an area that does not broadcast  
XDS signals, you must set the clock manually. Please see page 23 for instructions on how to manually set your  
DVD/VCR’s clock.  
Special note for residents of Newfoundland:  
The Auto Clock Setting cannot be used to set the DVD/VCR’s internal clock to Newfoundland time. The time  
zone command does not include a setting for the Newfoundland time zone. Trying to use the Auto Clock Setting  
in the Newfoundland time zone could result in an incorrect time setting or no setting at all. Please set your DVD/  
VCR’s clock using the Manual Clock Setting.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
GENERAL  
Power supply:  
Power consumption:  
AC 120V 60Hz  
Operation: 20W  
Stand by: 3W  
Weight:  
9.9lbs (4.5 kg)  
Dimensions:  
Width : 16-15/16 inches (430 mm)  
Height: 3-7/8 inches (99 mm)  
Depth : 12-1/4 inches (311 mm)  
Inputs/Outputs:  
Video:  
In: 1Vp-p/75 ohm  
Out: 1Vp-p/75 ohm  
-
Audio:  
In: 8 dBm/50K ohm  
-
Out: 8 dBm/1K ohm  
Antenna:  
UHF/VHF IN/OUT: 75 ohm coaxial  
Hi-Fi Frequency Response: 20Hz to 20,000Hz  
Hi-Fi Dynamic Range:  
More than 90dB  
VCR section  
Video Head:  
Audio Track:  
Tuner:  
4 Rotary Heads  
Hi-Fi Sound - 2 Tracks / MONO Sound - 1 Track  
181 Channel Freq. Synthesized  
VHF  
UHF  
2-13  
14-69  
CATV 14-36 (A)-(W)  
37-59 (AA)-(WW)  
60-85 (AAA)-(ZZZ)  
86-94 (86)-(94)  
95-99 (A-5)-(A-1)  
100-125 (100)-(125)  
01 (5A)  
RF Channel Output:  
F.FWD/REW Time:  
Channel 3 or 4, Switchable  
Approx. 1 minute 48 seconds (with T-120 Cassette Tape) (at+25°C)  
DVD section  
Signal system:  
Applicable disc:  
Audio characteristics:  
Frequency response:  
S/N Ratio:  
NTSC  
DVD (12cm, 8cm), CD (12cm, 8cm)  
DVD: 4Hz - 22KHz  
CD: 4Hz - 20KHz  
90dB  
Harmonic distortion:  
Wow and flutter:  
Dynamic range:  
Output:  
0.02%  
Below Measurable Level  
90dB  
Video : (RCA) 1 Vp-p/75ohm  
-
Audio : (RCA) 8 dBm/1Kohm  
Digital Audio : 0.5Vp-p 75 ohm  
CD : Wavelength: 775 - 805 nm  
Maximum output power: 0.5 mW  
DVD : Wavelength: 640 - 660 nm  
Maximum output power: 1.0 mW  
Pickup:  
ACCESSORIES:  
Remote control x 1  
Batteries (2 x AA)  
75 ohm Coaxial Cable x 1  
AUDIO/VIDEO Cable x 1  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FOR SERVICING (Only in U.S.A.)  
HOW TO LOCATE YOUR JVC SERVICE CENTER  
TOLL FREE: 1-800-537-5722  
Dear Customer,  
In order to receive the most satisfaction from your purchase, please read the instruction booklet before operating  
the unit. In the event that repair is necessary, or for the address nearest your location within the Continental  
United States, please call 1-800-537-5722 for your nearest authorized servicer or visit our website at  
— JVC  
JVC SERVICE & ENGINEERING  
COMPANY OF AMERICA  
DIVISION OF JVC AMERICAS CORP.  
Sophisticated electronic products may require occasional service. Just as quality is a keyword in the engineering  
and production of the wide array of JVC products, service is the key to maintaining the high level performance  
for which JVC is world famous. The JVC service and engineering organization stands behind our products.  
NATIONAL HEADQUARTERS  
JVC SERVICE & ENGINEERING COMPANY OF AMERICA  
DIVISION OF JVC AMERICAS CORP.  
10 New Maple Avenue  
Pine Brook, NJ 07058-9641  
Don’t service the product yourself.  
ACCESSORIES  
To purchase accessories for your JVC product, you  
may contact your local JVC Dealer.  
CAUTION  
To prevent electrical shock, do not open the cabinet.  
From the 48 Continental United States call toll free:  
There are no user serviceable parts inside.  
Please refer to qualified service personnel for repairs.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARRANTY (Only in U.S.A.)  
LIMITED WARRANTY  
CONSUMER VIDEO 1-90  
JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE  
ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the  
date of original retail purchase for the period as shown below. (“The Warranty Period”)  
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND  
IN COMMONWEALTH OF PUERTO RICO.  
WHAT WE WILL DO:  
If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner. Such  
repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service  
centers. Parts used for replacement are warranted only for the remainder of the Warranty Period. All products and parts  
thereof may be brought to a JVC authorized service center on a carry-in basis except for Television sets having a screen  
size 25 inches and above which are covered on an in-home basis.  
WHAT YOU MUST DO FOR WARRANTY SERVICE:  
Return your product to a JVC authorized service center with a copy of your bill of sale. For your nearest JVC authorized  
service center, please call toll free: (800) 537-5722.  
If service is not available locally, box the product carefully, preferably in the original carton, and ship, insured, with a copy  
of your bill of sale plus a letter of explanation of the problem to the nearest JVC Factory Service Center, the name and  
location of which will be given to you by the toll-free number.  
If you have any questions concerning your JVC Product, please contact our Customer Relations Department.  
WHAT IS NOT COVERED:  
This limited warranty provided by JVC does not cover:  
1. Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty  
installation, lack of reasonable care, or if repaired or serviced by anyone other than a service facility authorized by  
JVC to render such service, or if affixed to any attachment not provided with the products, or if the model or serial  
number has been altered, tampered with, defaced or removed;  
2. Initial installation and installation and removal for repair;  
3. Operational adjustments covered in the Owner’s Manual, normal maintenance, video and audio head cleaning;  
4. Damage that occurs in shipment, due to act of God, and cosmetic damage;  
5. Signal reception problems and failures due to line power surge;  
6. Video Pick-upTubes/CCD Image Sensor, Cartridge, Stylus (Needle) are covered for 90 days from the date of purchase;  
7. Accessories;  
8. Batteries (except that Rechargeable Batteries are covered for 90 days from the date of purchase);  
There are no other express warranties except as listed above.  
THE DURATION OF ANY IMPLIED WARRANTIES INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY,  
IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.  
JVC SHALL NOT BE LIABLE FORTHE LOSS OF USE OFTHE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER  
DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, WITHOUT LIMITATION, DAMAGE  
TO TAPES, RECORDS OR DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY  
BREACH OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD  
SET FORTH ABOVE.  
Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an implied  
warranty lasts, so these limitations or exclusions may not apply to you. This warranty gives you specific legal rights and  
you may also have other rights which vary from state to state.  
JVC COMPANY OF AMERICA  
1700 Valley Road  
DIVISION OF JVC AMERICAS CORP.  
Wayne, New Jersey 07470  
REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY, THIS WARRANTY DOES NOT APPLY. FOR  
DETAILS OF REFURBISHED PRODUCT WARRANTY, PLEASE REFER TO THE REFURBISHED PRODUCT  
WARRANTY INFORMATION PACKAGED WITH EACH REFURBISHED PRODUCT.  
For customer use:  
Enter below the Model No. and Serial No. which is located either on the rear, bottom or side of the  
cabinet. Retain this information for future reference.  
Model No.:  
Serial No.:  
Purchase date:  
Name of dealer:  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VICTOR COMPANY OF JAPAN, LIMITED  
2B00401C  
02/06  
U
Printed in Thailand  
(HR-XVC1U(C)/M)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Infinity Stereo System 11cs User Manual
Insignia Toaster NS TWSS2 User Manual
Intel Switch SBC 455 User Manual
JVC CD Player KD G305 User Manual
JVC DVD Player TH S7 User Manual
JVC Portable CD Player 601 610000 030 User Manual
Jwin CD Player JX CD7000 User Manual
Kawasaki Offroad Vehicle P9723 User Manual
Keys Fitness Treadmill 502t User Manual
Kodak Universal Remote 2F6571 User Manual