OWNER’S MANUAL
4
MODELS:
RS-840UD
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Precautions
Precautions in Installing the Display
Warning
n Keep away from heat sources like heaters or open flames.
- Electrical shock, fire, malfunction or deformation may occur.
n Keep the packing anti-moisture material or vinyl packing out of the reach of children.
- Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and
visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of
children.
n Do not put heavy objects on the display or sit upon it.
- If the display collapses or is dropped, you may be injured. Children must pay particular attention.
n Do not leave the power or signal cable where someone can trip over it.
- The passerby can falter, which can cause electrical shock, fire, display breakdown, or injury.
n Install the display in a neat and dry place. Do not use near water.
- Dust or moisture can cause electrical shock, fire, or display damage.
n Do not add accessories that have not been designed for this display.
n If you smell smoke or other odors or hear a strange sound from the display, unplug the power
cord and contact Customer Service.
- If you continue to use without taking proper measures, electrical shock or fire can occur.
n If you dropped the display or the case is broken, turn off the display and unplug the power
cord.
- If you continue to use without taking proper measures, electrical shock or fire can occur. Contact
Customer Service.
n Do not drop an object on or apply impact to the display. Do not throw any toys or objects at the
display.
- It can cause injury to humans, problems to the display, and damage the display.
n Keep out of reach of children and do not place toys near the display.
n Make sure the display ventilation hole is not blocked. Install the display more than 10cm away
from the wall.
- If you install the display too close to the wall, it may be deformed or fire can break out due to internal
heat build-up.
n Do not cover the display with cloth or other material (eg. plastic) while plugged in.
- The display can be deformed or fire can break out due to internal overheating.
n Place the display on a flat and stable surface that is large enough to support the display.
- If the display is dropped, you may be injured or the display may be broken.
n Install the display where no Electromagnetic Interference occurs.
n Keep the display away from direct sunlight.
- The display can be damaged.
n Do not place the display on the floor.
- Small children and others may trip over it.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Precautions
Precautions in Moving the Display
Warning
n Make sure to turn off the display.
- You may be electrocuted or the display can be damaged.
n Make sure to remove all cables before moving the display.
- You may be electrocuted or the display can be damaged.
n Do not shock the display when moving it.
- You may be electrocuted or the display can be damaged.
n Make sure the display faces forward and hold it with both hands to move.
- If you drop the display, the damaged display can cause electric shock or fire.
n Do not place the display face down.
- This may damage the display.
Precautions in Using/Cleaning the Display
Warning
n Do not attempt to disassemble, repair, or modify the display yourself.
- Fire or electric shock can occur.
- Contact Customer Service for repair.
n When cleaning the display, unplug the power cord and scrub gently with a soft cloth to prevent
scratching. Do not clean with a wet cloth or spray water or other liquids directly onto the
display. An electric shock may occur. (Do not use chemicals such as benzene, paint thinners,
or alcohol)
n Keep the display away from water.
- Fire or electric shock accident can occur.
n Avoid high temperatures and humidity.
n Do not put or store flammable substances near the display.
- There is a danger of explosion or fire.
n Keep the display clean at all times.
n Do not press on the display with a hand or sharp object such as nail, pencil or pen, or make a
scratch on it.
n Keep proper distance from the display and rest from time-to-time.
- Your vision may be impaired if you look at the display too closely or for too long.
n Keep small accessories out of the reach of children.
n Leaving a fixed image on the display for a long time may cause damage to the display and
cause image retention. Make sure to use a screen saver on the display. Burn-in and related
problems are not covered by the warranty on this display.
n Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame; wipe in one
direction only. Too much moisture may cause staining.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Precautions
On Disposal (Only, Hg lamp used Display)
n The fluorescent lamp used in this display contains a small amount of mercury.
n Do not dispose of this display with general household waste.
n Disposal of this display must be carried out in accordance to the regulations of your local
authority.
Precautions for Image Sticking
To optimize display lifetime and function, pay attention on the following operation
usages:
n Normal operating condition
- Operating Temperature: 0°C to 35°C
- Operating Ambient Humidity: 20% to 90%
- Display Pattern: dynamic pattern (real display)
Note: Long-term static display can cause image sticking.
n Operating usages under abnormal condition
a. Ambient condition
- Well-ventilated place is recommended to set up the system.
b. Power and screen saver
- Periodical power-off or screen saver is needed after long-term display.
n Operating usages to protect against image sticking due to long-term static display
a. Suitable operating time
- Under 18 hours a day.
b. Static information display recommended to use with moving image
- Cycling display between 5 minutes information (static) display and 10 seconds moving image.
c. Background and character (image) color change
- Use different colors for background and character, respectively.
- Change colors themselves periodically.
d. Avoid combination of background and character with large different luminance
Note:
1) Abnormal condition just means conditions except normal condition.
2) Black image or moving image is strongly recommended as a screen saver.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
Included Accessories
Thank you for your purchase. Ensure that the following accessories are included
with your display. If an accessory is missing, please contact the dealer where you
purchased the display.
v The accessories included may differ from the images shown below.
Remote Control &
Power Cord
Quick Start Guide
Batteries (AAA × 2)
*Power Cord for EU
(Optional)
Stand
Stand Screws (6 pieces) CD-ROM (User’s Manual)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Name and Function of the Parts
* The image shown in the user’s guide could be different from the actual image.
Front View
1
2
No. Item
Description
Indicate power on or sleep mode status.
- Power on: LED lights up.
Power indicator
1
- Power off: LED off.
2
Receive incoming remote control commands.
IR Receiver
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Name and Function of the Parts
Rear View
1
2
3
4
12
UHD60
USB
1
INPUT
MENU
11
VOL
2
VOL
HDMI
1
2
10
PC / MUSIC
COMPONENT / VIDEO
AUDIO OUT
RS-232 IN
RS-232 OUT
ETHERNET
3
Y/V
Pb/Cb
Pr/Cr
L
AUDIO
R
PC
AUDIO DPTICAL
OUT
RGB (PC)
COMPONENT [GOOD]
AUDIO IN
1
2
3
4
5
6
7
8
9
No. Item
Description
Connect the power cord.
AC Power Input
Connector
1
2
3
Switch the power supply on/off.
AC Switch
Connect several displays with serial port.
RS-232C Serial
Ports
Connect to a local area network (LAN) using an
Ethernet cable.
4
Ethernet Port
5
6
Connect to a PC VGA port.
RGB Port
PC Audio Input
Port
Connect to a PC’s line / audio port.
Connect to an external device, such as a VCR, STB, or
a DVD player.
Component/
Video Input Ports
7
8
Connect an external audio system or headphones.
Stereo Audio
Line Out
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Name and Function of the Parts
Rear View (continue)
No. Item
Description
Connect an audio amplifier.
Optical Audio
Out
9
Connect an HDMI equipment or an HDMI-DVI adapter
cable to devices such as a DVD player or set-top box.
HDMI Ports
10
v HDMI Supports High Definition input and HDCP
(High-bandwidth Digital Content Protection). Some
devices require HDCP in order to display HD signals.
Connect to a USB device such as a USB flash drive or
USB hard disk drive.
USB Ports
11
12
Connect an HDMI equipment such as a computer,
camcorder, or multimedia player which are able
to output 4x HDMI with individually 1080p@60Hz
resolution and compose to a UHD@60Hz resolution.
HDMI-UHD60
Ports
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
Name of the Remote Control Buttons
Power
Turn the display on/off.
OK
• Enter the submenu.
• Confirm the selection.
Wide
Multimedia
Enter the multimedia
mode.
Change the display mode.
Audio only
Only output audio from
Input
the display speaker.
Switch the input source.
Up
• Move upward on the
selection.
• Change selected item.
Menu
Display OSD (on-screen
display) menu.
Info
Display the input information.
Left
• Decrease the values.
• Change the options.
Back
Return to the previous
menu/screen.
Right
• Increase the values.
• Enter the submenu.
• Change the options.
Down
• Move downward on the
selection.
Exit
Exit OSD menu.
Mute
Mute the audio.
• Change selected item.
Volume
Adjust the volume.
Numbers (0~9, -)
Input the number.
Installing Batteries into the Remote Control
1. Open the battery cover.
2. Install the batteries matching the
correct polarity.
• Install two 1.5V AA batteries.
3. Close the battery cover.
• Dispose the used batteries
in the recycle bin to prevent
environmental pollution.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Stand Installation
Installing the Stand
1. Place the display with the screen side down on a flat and cushioned surface.
Then, attach the stand as shown in the illustration.
2. Secure the stand with the six included screws. Please fasten with a screwdriver.
• If you do not fasten the screws, the display may fall, which may result in
damage to the product.
Note
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Stand Installation
Removing the Stand
1. Place the display with the screen side down on a flat and cushioned surface.
Then, remove the screws.
2. Detach the stand from the display.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Mounting on a Wall
VESA FDMI Wall Mounting
This display supports a VESA FDMI compliant mounting interface. These mounts
are purchased separately. Refer to the instructions included with the wall mount for
more information.
v The handles are designed for carrying.
VESA-compatible wall bracket (WxH) Screw type
M8
Mount holes number
4
400 x 600 mm
Handle
Handle
I
N
P
U
T
MEN
U
VOL
VOL
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to External Devices
Recommended Connection, Resolution & Picture Mode
HDMI Connection, 3840 x 2160@30Hz, dynamic
HDMI Connection (480p, 576p, 720p, 1080i, 1080p,
UHD@24Hz/30Hz)
HDMI supports ultra high definition (UHD) input, high definition input, and HDCP
(High-bandwidth Digital Content Protection). Some devices require HDCP in order to
display HD signals.
HDMI
HDMI signal cable
1
Display
2
3
VCR/DVD/Set-top Box
AUDIO
IN
HDMI
HDMI to DVI signal cable
1
2
3
Display
VCR/DVD/Set-top Box
Note: Dolby Digital is not supported.
AUDIO
IN
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to External Devices
HDMI-UHD60 Connection (3840 x 2160 @60Hz)
Four HDMI ports form a UHD 60Hz. Each connection transmits 1080P @60Hz.
HDMI signal cable
1
2
3
4
1
2
3
4
HDMI signal cable
HDMI signal cable
HDMI signal cable
Computer/
Camcorder/
Multimedia
player
Display
UHD60
PC Connection
Check that the computer, display, and the peripherals are turned off. Then, connect
the signal input cable.
A. Connecting with an HDMI Signal Input Cable
HDMI
Display
B. Connecting with a D-sub(VGA) Signal Input Cable
Audio cable
PC
AUDIO IN
PC
RGB (PC)
Display
MAC
Macintosh Adapter
Use only the standard Macintosh adapter.
Do not use other adapter type that is compatible with different
signaling system.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to External Devices
Audio Out Connection
AUDIO OUT
Audio cable
Display
Speaker
DPTICAL
Optical audio
cable
Display
Audio
amplifier
Component Connection
VCR/DVD/Set-top Box
Display
Y/V
Pb/Cb
Pr/Cr
L
AUDIO
R
COMPOSITE [GOOD]
Component AV cable
Composite (Video) Connection
VCR/DVD/Set-top Box
Display
Y/V
Pb/Cb
Pr/Cr
L
AUDIO
R
COMPOSITE [GOOD]
Composite AV cable
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to External Devices
USB Connection
USB
1
USB Flash Drive
2
Display
Ethernet Connection
ETHERNET
Network
Ethernet (RJ-45) cable
Display
Power Connection
Rear side of the display
INPUT
MEN
U
VOL
VOL
Power
outlet
Power cord
16
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Menus
Screen Adjustment Options (using the Control Panel)
INPUT
MENU
5
6
7
VOL
VOL
INPUT
MENU
2
4
VOL
VOL
1
3
No. Item
Description
1
Select menu item (move up).
Up
2
Select menu item (move down).
- Increase the volume level.
Down
Volume Up
3
4
- Adjust the settings (increase the value).
- Decrease the volume level.
Volume Down
- Adjust the settings (decrease the value).
5
6
7
Turn the display on/off.
Switch the input source.
Power
Input
Menu
Display/hide the OSD (on-screen display) menu or
return to the previous menu.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Menus
Menu Options
Menu
Description
Select the input source.
Input
Picture
Audio
Setup
Adjust and refine the picture displayed on your display based
on ambient room light and personal preferences.
Adjust the audio settings.
Adjust the general settings such as CEI setting, OSD language,
and etc.
Configure the network settings.
Ethernet
Wide
Select how the picture displays on the screen.
Set the timer to turn the display off at the preset time.
Sleep Timer
Note
OSD (On Screen Display)
The OSD function enables you to adjust the screen status conveniently
since it provides graphical presentation.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Menus
Adjusting On-Screen Display (OSD) Settings
Return
to
previous
menu
Display
OSD
menu
Select
a main
menu
Enter the
selected
menu
Select
a menu
item
Enter the
submenu
Adjust the
setting
Confirm
the
setting
(*operation using the remote control)
1
2
3
4
5
6
7
8
Press the MENU button to display the OSD menu.
Use the p/q button to select the main menu.
Press the OK or u button to enter the selected menu screen.
Use the p/q button to select the menu item.
Press the OK or u button to enter the submenu.
Use the t/u button to adjust the setting/select the option.
Use the OK button to confirm the setting.
Press the MENU button to return to the previous menu/exit the OSD menu.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Menus
Input Menu
Select the proper input source.
Note
• You can also access the Input menu by pressing the INPUT button on
the remote control.
• The available menu options varies depending on the input source.
• If the menu items are appears in gray, this indicates that those functions
are not available.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Menus
Picture Menu
Menu Option Description
Select a preset view option optimized for different viewing
conditions.
Picture
Mode
• Custom: User can use the user-defined settings as they wish.
• Cinema: This mode is normally used in movie. Soft image can
be seen in this mode. The picture is somewhat darker than other
mode.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Menus
Picture Menu (continue)
Menu Option Description
Picture
Mode
• Nature: This mode shows normal and natural image.
• Sports: This mode uses high contrast display for clear-cut
images ideal for viewing sports events.
• Dynamic: This mode is normally used in department store,
Backlight and Sharpness is set to its maximum value. Saturation
of Color becomes high. You can see very bright, clear, and
sharp image.
• Game: This mode increases the brightness and response time
level for enjoying video games.
Note
“Picture Mode” option is not available if the input
source is PC.
Select the appropriate setting of dark scenery. With greater
gamma value, dark scenery looks brighter.
Gamma
Adjust the backlight that affects the overall brilliance of the picture.
Backlight
Contrast
Adjust the difference between the light and dark levels in the
picture.
Adjust the brightness setting.
Brightness
Color
Adjust the color intensity of the picture.
Adjust the picture hue.
Tint
Adjust the sharpness of the edges of elements in the picture.
Sharpness
Note
“Sharpness” option is not available if the input
source is PC.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Menus
Picture Menu (continue)
Menu Option Description
Size &
Position
Adjust the display settings.
• Auto Adjust: Synchronize the display automatically.
• Horiz. Position: Move the screen position horizontally.
• Vertical Position: Move the screen position vertically.
• Horizontal Size: Set the horizontal size of the screen.
• Vertical Size: Set the vertical size of the screen.
• Fine Tune: Adjust the focus of the display. This item allows you
to remove any horizontal noise and clear or sharpen the image
of characters.
Note
• “Size & Position” menu is not available if the input source is HDMI-
UHD60.
• The available menu options varies depending on the input source.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Menus
Picture Menu (continue)
Menu Option Description
Color
Adjust the color settings.
Temperature
• Color Temperature: Select from the predetermined color
temperatures.
• Red Gain / Green Gain / Blue Gain: Adjust the red / green /
blue gain settings to your preference.
• Red Offset / Green Offset / Blue Offset: Adjust the red / green
/ blue offset settings to your preference.
• Reset Color Temperature: Reset all Color Temperature
settings to the factory default settings.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Menus
Picture Menu (continue)
Menu Option Description
Advanced
Picture
Set advanced Picture settings.
• Dynamic Contrast: Adjust the brightness of the display to
maximize the picture quality.
• Local Dimming: Reduce the leakage and produce a darker
picture.
• MEMC: Reduce motion blur effect.
• Noise Reduction: Reduce the noise level.
• Digital NR: Reduce the noise level of digital signals.
• Film Mode: Produce smoother motion picture when viewing
movies from video players connected via HDMI.
Note
• “Advanced Picture” option is not available if the
input source is PC.
• Only “Local Dimming” and “MEMC” options are
available if the input source is HDMI-UHD60.
Reset
Reset all Picture settings to the factory default settings.
Picture
Settings
Select OK to reset all settings.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Menus
Audio Menu
Menu Option
Description
Enable/Disable the multi-dimensional surrounding sound
function.
XinemaSound™
3D
XinemaSound™
Leveler
Enable/Disable the smooth and steady volume level function.
Adjust the bass level to your preference.
Bass
Adjust the treble level to your preference.
Treble
Balance
Adjust the sound balance between the left and right speakers.
Adjust to match the movements and the lips of the person
talking on the screen.
Lip Sync
Speakers
Turn the built-in speakers on or off.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Menus
Audio Menu (continue)
Menu Option
Audio Only
Description
Output audio from the TV speakers but turn off the TV display.
Select the type of digital audio output to an external audio
system.
Digital Audio
Out
Analog Audio
Out
Select the analog audio mode.
Customize the equalizer settings.
Equalizer
Settings
To adjust the settings, do the following:
i. Press the t/u button to select the option and select OK to
enter the submenu.
ii. Press the p/q button to adjust the setting.
Reset Audio
Settings
Reset all Audio settings to the factory default settings.
Select OK to reset all settings.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Menus
Setup Menu
Menu Option
Description
Configure CEI settings.
CEI Settings
• CEI Function: Enable/Disable CEI function.
• Device Search: Search for CEI devices.
Note
“Device Search” option is only available if CEI
function is enabled.
Select the on-screen menu language.
Menu Language
Enable or disable the power indicator on the front of the display
when the display is turned on.
Power Indicator
Wired Control
Specify the type of network connection.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Menus
Setup Menu (continue)
Menu Option
Set ID
Description
Assign a unique Set ID NO (name assignment) to each display
when several displays are connected (via RS-232C) for
display.
Enter the ID number and select Set to confirm the setting.
Display the system information of the display.
System
Information
Select System Information to view the system information.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Menus
Setup Menu (continue)
Menu Option
Description
Return the display parameters on all menus to the factory
default settings.
Reset All
Settings
Select OK to reset all settings.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Menus
Ethernet Menu
Menu Option
Manual Setup
Description
Configure the network settings.
• Type: User can use the user-defined settings as they wish.
• IP Address / Subnet Mask / Def. Gateway / Pref. DNS /
Alt. DNS: Enter the respective network parameters.
• Connect: Verify the network connection.
• Check with your Information Technology Provider
for the correct setting.
Note
• Be sure the RJ-45 cable is properly connected.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Menus
Wide Menu
Select how the picture displays on the screen. As you select an option, you will see
the screen adjusting to the different size.
• The available menu options varies depending on the input source.
• “Wide” menu is not available if the input source is 4k2k.
Note
• The option is either “Panoramic” or “Stretch” depend on input screen
format:
- Panoramic: Standard screen format (ex. 4:3)
- Stretch: Wide screen format (ex. 16:9)
32
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Menus
Sleep Timer
Set the timer to turn the display off at the preset time.
Note
You can also access the Sleep Timer menu by pressing the SLEEP
button on the remote control.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia Mode
Multimedia Menu
This display is equipped with USB port that enables you to view photos, listen to
music, or watch videos stored on a USB storage device.
Multimedia support format
Container
Extensions Audio/Video Codec
ASF
.asf
Video
VC-1/WMV9 Advanced
Profile
.wmv
.wma
VC-1/WMV9 Simple and
Main Profiles
H.264/MPEG-4 AVC
AVI/DivX
MPEG-2
.avi
Video/Audio H.264, AVC
MPEG-1 Layer 1, 2, 3
.divx
AC-3
.ts
Video
H.264 / AVC
MPEG-2
TS (Transport
Stream)
.trp
.tp
VC-1
standard 188 byte
TS and time-stamped
192 byte TS
.m2ts
.m2t
.mts
Audio
MPEG-1 Layer I, II
MPEG-1 Layer III (MP3)
AC-3
AAC
MPEG-2
.vob
Video
MPEG-1
MPEG-2
PS (Program Stream),
VOB, SVCD
Audio
AC-3
MPEG-1 Layer I, II
DVD-LPCM
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia Mode
Container
Extensions Audio/Video Codec
MP4
.mp4
.m4a
.m4v
Video
H.264 / AVC
MPEG-4 Part 2
H.263
Audio
AAC
AC3
MP3
.mp3
.wav
MP3
WAVE/WAV
JPEG
Audio
8 bit, 16 bit PCM
JPEG
.jpeg
.jpg
• All still pictures are scaled to 1920 x 1080 then upscaled to 3840 x 2160
for display.
Note
• Video decoding supports up to FHD 30P.
Basic Operation
1. Turn on the display.
2. Plug a USB device to the USB port on the display.
3. Press the MULTIMEDIA button on the remote control.
4. Select the USB port that you want to access and press
the OK button.
5. Select the media type of the file you wish to play and
press the OK button.
6. Use the p/q/t/u button to browse the files,
folders or menu options and press the OK
button to confirm.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia Mode
Playback Music
1. Select Audio and press the OK button to enter the main Music content browser.
2. In the main Music content browser, use the p/q button to select a song.
3. Press the OK button to play, and an automatic playback begins from the selected
song.
n Press the
Press the
icon to pause the selected song playback.
button to resume the playback.
n You can highlight the
icon and press the OK
button to skip to the next song.
n You can highlight the
icon and press the OK
button to skip to the previous song.
n Select Sort to specify the sorting method.
n Select View to change the type of file listing.
n Select Browser Photos to playback photos.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia Mode
Watching Videos
1. Select Video and press the OK button to enter the main Video content browser.
2. In the main Video content browser, use the p/q button to select a video.
3. Press the OK button to begin the video playback.
n Press the
icon to pause the selected video playback. Press the
button to
resume the playback.
n Press the
button to fast-forward the video
playback.
n Press the
n Press the
button to rewind the video playback.
button to stop the playback.
n Select Sort to specify the sorting method.
n Select View to change the type of file listing.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Multimedia Mode
Viewing Photos
1. Select Photo and press the OK button to enter the main Photo content browser.
2. In the main Photo content browser, use the p/q/t/u buttton to select a photo.
3. Press the OK button to view in full screen.
4. To begin a slide show, select Start Slideshow and press the OK button. A slide
show begins from the selected photo.
n Press the
button to pause the slide show, or press the
button to stop the
slide show.
n Select Sort to specify the file sorting method.
n Select View to change the type of file listing.
n Select Setting to customize the slide show settings.
- Shuffle: Enable/Disable the shuffle function.
- Speed: Set the interval time between each slide display.
- Effect: Select the transition effect between each slide
displays.
n Select Browser Music to playback songs.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing Display Mode
Set Aspect Ratio
1. Turn on the display.
2. Press the WIDE button on the remote control.
The Aspect Ratio menu appears on the screen.
3. Use the p/q button to select the aspect ratio of the display and press the OK
button to confirm.
Normal
Stretch
Wide
Panoramic
Zoom
• The available menu options varies depending on the input source.
Note
• The option is either “Panoramic” or “Stretch” depend on input screen
format:
- Panoramic: Standard screen format (ex. 4:3)
- Stretch: Wide screen format (ex. 16:9)
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
No image is displayed
• See if the power cord is properly
l Is the power cord connected?
connected to the outlet.
• See if the power switch is turned on.
• Adjust brightness and contrast again.
• Backlight may need repair.
l Is the power indicator light on?
l Power is on, power indicator
is blue but the screen appears
extremely dark.
• If the display is in power saving mode,
move the mouse or press any key.
l Is the power indicator amber?
• Turn both devices off and then back on.
• The signal cable between PC and display
is not connected. Check the signal cable.
l Does the ‘NO SIGNAL’
message appear?
• Press INPUT on the remote control to
check the input signal.
The screen image looks abnormal
l Is the screen positioned?
• D-SUB analog signal –Select Auto
Adjustment in Size & Position menu to
automatically select the optimal screen
status that fits the current mode.
l Do thin lines appear in the
background?
• D-SUB analog signal –Select Auto
Adjustment in Size & Position menu to
automatically select the optimal screen
status that fits the current mode. If the
adjustment is not satisfactory, use the
Fine Tune menu.
l Power is on, power indicator
is blue but the screen appears
extremely dark.
• D-SUB analog signal ––Select Auto
Adjustment in Size & Position menu to
automatically select the optimal screen
status that fits the current mode. If the
adjustment is not satisfactory, use the
Fine Tune menu.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
After-image appears on the screen
• If you display a fixed image for a long
l After-image appears when the
time, the pixels may be damaged quickly.
Use the screen-saver function.
previous image changed.
Screen color is abnormal
• Set the number of color to more than 24
bits (true color). Select Control Panel
–Display–Settings–Color Table menu in
Windows.
l Screen has poor color
resolution (16 colors).
• Check the connection status of the signal
cable or re-insert the PC video card.
l Screen color is unstable or
mono-colored.
• Several pixels (red, green, white, or
black color) may appear on the screen,
which can be attributable to the unique
characteristics of the LCD Panel. This is
not a malfunction of the LCD.
l Do black spots appear on the
screen?
If any of above instructions does not work, follow the instructions:
[1] Press MENU. Select Setup > Reset All Settings.
[2] Enter the password.
[3] Remove the AC power cord and wait for 10 seconds.
[4] Connect the AC power cord and turn on the display.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
The product specifications can change without prior notice for product improvement.
Size
84”
Native Resolution
Aspect Ratio
Frame Rate
Brightness
3840 x 2160
16:9
120Hz
LCD Panel
350 nits
Contrast Ratio
Response Time
Display Color
1400:1 (Typical)
5ms (Typical)
1.06 Billion
Input Voltage (min
range)
90 ~ 264V
50~60 Hz
Input Frequency (min
range)
Power
On
550W
≤ 3W
Power Consumption
(Max)
Standy
Controllable ≤ 15W
Standby
Dimensions (Width x Height x Depth)
1919.2mm x 1166.6mm x 394mm (with stand)
1919.2mm x 1105.2mm x 67mm (without stand)
Net Weight
Dimensions &
Weight
81.5kg (with stand)
77.5kg (without stand)
RGB: 1920 x 1080 @60 Hz
Single HDMI: 3840 x 2160
@23.98/24/25/29.97/30Hz
Video Signal
Maximum Resolution
4x HDMI: 3840 x 2160 @50/60Hz
Component: 1920 x 1080 I @50Hz
Composite: 480i (NTSC)
4K2K@30Hz / 4K2K@25Hz / 4K2K@24Hz: Up to RGB 4:4:4: 8 bit
≤ 1080P or 4K2K@50Hz / 4K2K@60Hz: Up to RGB 4:4:4 12 bit
Supported
Color Format
HDMI, HDMI UHD60, RGB (VGA), RS-232C, RJ-45, Component/
Composite
Input
Connector
Temperature: 0°C to 35°C, Humidity: 20% to 90%
Temperature: -20°C to 60°C, Humidity: 10% to 90%
Operational Condition
Storage Condition
Environmental
Conditions
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
PC Mode (RGB) – Preset Mode
Mode No.
Resolution
720 x 400
Refresh rate
70Hz
1
2
640 x 480
60Hz
3
640 x 480
75Hz
4
800 x 600
60Hz
5
800 x 600
72Hz
6
800 x 600
75Hz
7
1024 x 768
1024 x 768
1024 x 768
1280 x 1024
1280 x 1024
1920 x 1080
60Hz
8
70Hz
9
75Hz
10
11
12
60Hz
75Hz
60Hz
HDMI – Preset Mode
Single HDMI
Mode No.
Resolution
640 x 480 P
Refresh rate
60Hz 4:3
59.94Hz
60Hz 16:9
50Hz
1
2
720 x 480 P
3
720 x 480 P
4
720 x 576 P
5
1280 x 720 P
1280 x 720 P
1920 x 1080 I
1920 x 1080 I
1920 x 1080 P
1920 x 1080 P
1920 x 1080 P
1920 x 1080 P
1920 x 1080 P
1920 x 1080 P
50Hz
6
60Hz 16:9
50Hz
7
8
60Hz 16:9
50Hz
9
10
11
12
13
14
59.94Hz
60Hz 16:9
23.98Hz
24Hz
30Hz 16.9
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Single HDMI
Mode No.
Resolution
Refresh rate
23.98Hz
24Hz
15
16
17
18
19
3840 x 2160
3840 x 2160
3840 x 2160
3840 x 2160
3840 x 2160
25Hz
29.97Hz
30Hz
UHD60 (4x HDMI)
Mode No.
Resolution
3840 x 2160
3840 x 2160
Refresh rate
50Hz
1
2
60Hz
Component Mode – Preset Mode
Mode No.
Resolution
720 x 480 I
Refresh rate
59.94Hz
59.94Hz
60Hz
1
2
3
4
5
6
7
8
720 x 480 P
1280 x 720 P
1920 x 1080 I
720 x 576 I
60Hz
50Hz
720 x 576 P
1280 x 720 P
1920 x 1080 I
50Hz
50Hz
50Hz
Composite Mode – Preset Mode
Mode No.
Resolution
1
480i (NTSC)
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Daisy Chain Connection
Use this method to connect several displays to a single PC.
You can control several displays at a time by connecting them to a single PC.
Connecting the cable
Connect the RS-232C cable as shown in the illustration.
* The RS-232C protocol is used for communication between the PC and display.
You can turn the display on/off or adjust the OSD menu from your PC.
RS-232C cable (not included)
IN
OUT
IN
OUT
IN
OUT
IN
OUT
PC
Display 1
Display 2
Display 3
Display 4
*Maximum of Daisy Chain: 4 pcs
RS-232C Configurations
2-Wire Configurations (Not Standard)
PC DB 9 Pin Male
Pin No. Designation Description Input/Output
PC (or PD RS-232C Out)
PD (RS-232C In)
5
9
1
1
6
2
7
3
8
4
9
5
1
2
3
4
5
6
7
8
9
DCD Data carrier detect
RxD Receive data
TxD Transmit data
DTR Data terminal ready
GND Ground
Input
Input
Output
Output
-
6
Pin 2 ,RD
2
3
4
5
7
8
9
6
1
Pin 3 , TD
9 Pin RS-232C Cable
DSR Data set ready
RTS Request to send
CTS Clear to send
Input
Output
Input
Input
Male
Male
RI
Incoming call
Communication Parameter
a Baud Rate: 9600
a Data Length: 8 Bit
a Parity Bit: None
a Stop Bit: 1 Bit
a Flow Control: None
a Communication Code: Hex Code
a Use a DB 9 Pin Cable
45
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI CEI Connection
With Consumer Electronics Interface (CEI) feature, you can command and
control two or more CEC-enabled boxes, that are connected through HDMI, by
using only one of their remote controls. (e.g. controlling a television set, set-
top box and DVD player using only the remote control of the display).
Connecting the cable
Connect the HDMI cable as shown in the illustration.
HDMI
HDMI
Display
*Not support HDMI splitter or Daisy Chain connection, only support PC-Display 1:1
control.
HDMI CEI statement
Term
Description
One Touch Play Turning on the HDMI source device cause the connected
Display to be turned on and switch to HDMI Input
automatically.
Routing Control Switch (Remote control or Front key) Display Input to
HDMI will cause the HDMI source device to be turned on.
System Standby Turning off the Display will cause the HDMI Devices in
the CEC net to be turned off.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C
Controlling the Multiple Product
RJ-45
RS-232C and RJ-45 Protocol
Checksum
(1byte)
Header (5 bytes)
Payload (4 bytes)
# of
Prefix code Prefix code Set Payload
command
Set Power
payload Command
bytes
data #0
data #1
data #2
CS #0
#0
#1
ID
Type
0xCC
0x33
0
4
4
4
0x10
0x10
0x11
0 : 0ff
1 : On
0xE0 : OK
0xE1 : NG
reserved (0x00) reserved Header XOR
(0x00) Payload
reserved (0xFF) reserved Header XOR
(0xFF) Payload
Ack Set
Power
Set Input
Source
0xCC
0xCC
0x55
0x33
0
0
0x30 : VGA1 reserved (0x00) reserved Header XOR
0x40 : DVI1
0x50 : HDMI1
0x51 : HDMI2
0x52 : HDMI3
0x60 :
(0x00)
Payload
Composite1
0x70 : YPbPr1
0x80 : Music
Port
0x90 : TV1
0xA0 : HDMI-
UHD60
Ack Input
Source
Read Input
Source
Ack Read
Input Source
0xCC
0xCC
0xCC
0x55
0x33
0x55
0
1
1
4
4
4
0x11
0x11
0x11
0xE0 : OK
0xE1 : NG
reserved (0xFF) reserved Header XOR
(0xFF) Payload
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
0x30 : VGA1 reserved Header XOR
0xE0 : OK
0xE1 : NG
0x40 : DVI1
0x50 : HDMI1
0x51 : HDMI2
0x52 : HDMI3
0x60 :
(0xFF)
Payload
Composite1
0x70 : YPbPr1
0x80 : Music
Port
0x90 : TV1
0xA0 : HDMI-
UHD60
Set Screen
Mute
Ack Set
Screen Mute
Read Screen
Mute
Ack Read
Screen Mute
0xCC
0xCC
0xCC
0xCC
0x33
0x55
0x33
0x55
0
0
1
1
4
4
4
4
0x12
0x12
0x12
0x12
0 : mute off reserved (0x00) reserved Header XOR
1 : mute on
0xE0 : OK
0xE1 : NG
(0x00)
reserved (0xFF) reserved Header XOR
(0xFF) Payload
Payload
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
reserved Header XOR
(0xFF) Payload
0xE0 : OK
0xE1 : NG
0 : mute off
1 : mute on
A1
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C
Controlling the Multiple Product
RJ-45
Checksum
(1byte)
Header (5 bytes)
Payload (4 bytes)
# of
Prefix code Prefix code Set Payload
command
payload Command
bytes
data #0
data #1
data #2
CS #0
#0
#1
ID
Type
Set Remote
0xCC
0x33
0
4
0x14
0x08 : POWER reserved (0x00) reserved Header XOR
Controller Key
0x43 : MENU
0x0B : INPUT
0x40 : UP
(0x00)
Payload
0x41 : DOWN
0x07 : LEFT
0x06 : RIGHT
0x50 : OK
0x51 : INFO
0x52 : BACK
0x53 : EXIT
0x54 : VOL UP
0x55 : VOL
DOWN
0x56 : CH UP
0x57 : CH
DOWN
0x58 : LAST
0x59 : -
0x5A : MUTE
0x5B : SLEEP
0x5C : FR
0x5D : PLAY
0x5E : FF
0x5F :
MULTIMEDIA
0x60 : PAUSE
0x61 : STOP
0x62 : FAV. CH
0x63 : WIDE
0x64 : AUDIO
ONLY
0x80~0x89 :
0~9
Ack Set
Remote
Controller Key
Set
0xCC
0xCC
0x55
0x33
0
0
4
4
0x14
0x19
0xE0 : OK
0xE1 : NG
reserved (0xFF) reserved Header XOR
(0xFF) Payload
0 : off
reserved (0x00) reserved Header XOR
(0x00) Payload
SleepTime
1 : 30 min
2 : 60 min
3 : 90 min
4 : 120 min
5 : 180 min
0xE0 : OK
0xE1 : NG
Ack Set
SleepTime
Read
SleepTime
Ack Read
SleepTime
0xCC
0xCC
0xCC
0x55
0x33
0x55
0
1
1
4
4
4
0x19
0x19
0x19
reserved (0x00) reserved Header XOR
(0x00) Payload
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
remain Header XOR
0xE0 : OK
0xE1 : NG
0 : off
1 : 30 min
2 : 60 min
3 : 90 min
4 : 120 min
5 : 180 min
time to
sleep in
minute
Payload
Set VGA
Horz. Size
0xCC
0x33
0
4
0x20
0~255
reserved (0x00) reserved Header XOR
(0x00) Payload
A2
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C
Controlling the Multiple Product
RJ-45
Checksum
(1byte)
Header (5 bytes)
Payload (4 bytes)
# of
Prefix code Prefix code Set Payload
command
payload Command
bytes
data #0
data #1
data #2
CS #0
#0
#1
ID
Type
Ack Set VGA
Horz. Size
Read VGA
Horz. Size
Ack Read
VGA Horz.
Size
0xCC
0x55
0
4
4
4
0x20
0x20
0x20
0xE0 : OK
0xE1 : NG
reserved (0xFF) reserved Header XOR
(0xFF) Payload
0xCC
0xCC
0x33
0x55
1
1
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
reserved Header XOR
(0xFF) Payload
0xE0 : OK
0xE1 : NG
0~255
_Set Color
Temp. Reset
Ack Set Color 0xCC
Temp.
Set Picture
Mode
0xCC
0x33
0x55
0x33
0
0
0
4
4
4
0x21
0x21
0x30
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
reserved (0xFF) reserved Header XOR
(0xFF) Payload
0xE0 : OK
0xE1 : NG
0xCC
0 : Dynamic reserved (0x00) reserved Header XOR
1 : Normal
2 : Mild
(0x00)
Payload
3 : Usermild
(Custoom)
4 : Standard
(Natural)
5: Movie
(Cinema)
6 : Game
7 : Vivid
8 : Sport
Ack Set
0xCC
0xCC
0xCC
0x55
0x33
0x55
0
1
1
4
4
4
0x30
0x30
0x30
0xE0 : OK
0xE1 : NG
reserved (0xFF) reserved Header XOR
(0xFF) Payload
Picture Mode
Read Picture
Mode
Ack Read
Picture Mode
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
reserved Header XOR
(0xFF) Payload
0xE0 : OK
0xE1 : NG
0 : Dynamic
1 : Normal
2 : Mild
3 : User
4 : Custom
5 : Standard
6: Movie
7 : Game
8 : Vivid
9 : Sport
Set
Brightness
Ack Set
Brightness
Read
Brightness
Ack Read
Brightness
Set Contrast
0xCC
0xCC
0xCC
0xCC
0xCC
0xCC
0x33
0x55
0x33
0x55
0x33
0x55
0x33
0x55
0
0
1
1
0
0
1
1
4
4
4
4
4
4
4
4
0x31
0x31
0x31
0x31
0x32
0x32
0x32
0x32
0~100
reserved (0x00) reserved Header XOR
(0x00) Payload
reserved (0xFF) reserved Header XOR
(0xFF) Payload
0xE0 : OK
0xE1 : NG
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
reserved Header XOR
(0xFF) Payload
reserved (0x00) reserved Header XOR
(0x00) Payload
reserved (0xFF) reserved Header XOR
(0xFF) Payload
0xE0 : OK
0xE1 : NG
0~100
0~100
Ack Set
Contrast
Read Contrast 0xCC
0xE0 : OK
0xE1 : NG
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
reserved Header XOR
(0xFF) Payload
Ack Read
Contrast
0xCC
0xE0 : OK
0xE1 : NG
0~100
A3
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C
Controlling the Multiple Product
RJ-45
Checksum
(1byte)
Header (5 bytes)
Payload (4 bytes)
# of
Prefix code Prefix code Set Payload
command
payload Command
bytes
data #0
0~12
data #1
data #2
CS #0
#0
#1
ID
Type
Set
Sharpness
Ack Set
Sharpness
Read
Sharpness
Ack Read
Sharpness
Set Backlight
0xCC
0x33
0
4
4
4
4
4
4
4
4
4
0x33
0x33
0x33
0x33
0x34
0x34
0x34
0x34
0x35
reserved (0x00) reserved Header XOR
(0x00) Payload
reserved (0xFF) reserved Header XOR
(0xFF) Payload
0xCC
0xCC
0xCC
0xCC
0xCC
0xCC
0xCC
0xCC
0x55
0x33
0x55
0x33
0x55
0x33
0x55
0x33
0
1
1
0
0
1
1
0
0xE0 : OK
0xE1 : NG
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
reserved Header XOR
(0xFF) Payload
reserved (0x00) reserved Header XOR
(0x00) Payload
reserved (0xFF) reserved Header XOR
(0xFF) Payload
0xE0 : OK
0xE1 : NG
0~100
0~20
Ack Set
Backlight
Read
Backlight
Ack Read
Backlight
Set Color
Temp Mode
0xE0 : OK
0xE1 : NG
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
reserved Header XOR
(0xFF) Payload
0xE0 : OK
0xE1 : NG
0~100
0 : Cool (9300K) reserved (0x00) reserved Header XOR
1 : Medium
(6500K)
(0x00)
Payload
2 : Warm
(5500K)
3 : User
(Custom)
4 : Natural
5 : 3200K
0xE0 : OK
0xE1 : NG
Ack Set Color
Temp Mode
Read Color
Temp Mode
Ack Read
0xCC
0xCC
0xCC
0x55
0x33
0x55
0
1
1
4
4
4
0x35
0x35
0x35
reserved (0xFF) reserved Header XOR
(0xFF) Payload
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
0 : Cool (9300K) reserved Header XOR
0xE0 : OK
0xE1 : NG
Color Temp
Mode
1 : Medium
(6500K)
(0xFF)
Payload
2 : Warm
(5500K)
3 : User
(Custom)
4 : Natural
5 : 3200K
Set Color
Temp Red
Gain
Ack Set Color
Temp Red
Gain
Read Color
Temp Red
Gain
Ack Read
Color Temp
Red Gain
Set Color
Temp Green
Gain
0xCC
0xCC
0xCC
0xCC
0xCC
0x33
0x55
0x33
0x55
0x33
0
0
1
1
0
4
4
4
4
4
0x36
0x36
0x36
0x36
0x37
0 ~ 255
reserved (0x00) reserved Header XOR
(0x00) Payload
0xE0 : OK
0xE1 : NG
reserved (0xFF) reserved Header XOR
(0xFF) Payload
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
0xE0 : OK
0xE1 : NG
0 ~ 255
reserved Header XOR
(0xFF) Payload
0 ~ 255
reserved (0x00) reserved Header XOR
(0x00) Payload
A4
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C
Controlling the Multiple Product
RJ-45
Checksum
(1byte)
Header (5 bytes)
Payload (4 bytes)
# of
Prefix code Prefix code Set Payload
command
payload Command
bytes
data #0
data #1
data #2
CS #0
#0
#1
ID
Type
Ack Set Color
Temp Green
Gain
Read Color
Temp Green
Gain
Ack Read
Color Temp
Green Gain
Set Color
Temp Blue
Gain
Ack Set Color
Temp Blue
Gain
Read Color
Temp Blue
Gain
Ack Read
Color Temp
Blue Gain
Set VGA
Adjust Auto
Mode
Ack Set VGA
Adjust Auto
Mode
0xCC
0x55
0
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
0x37
0x37
0x37
0x38
0x38
0x38
0x38
0x3A
0x3A
0x3B
0x3B
0x3B
0x3B
0x3C
0x3C
0x3C
0x3C
0x3E
0xE0 : OK
0xE1 : NG
reserved (0xFF) reserved Header XOR
(0xFF) Payload
0xCC
0xCC
0xCC
0xCC
0xCC
0xCC
0xCC
0xCC
0xCC
0xCC
0xCC
0xCC
0xCC
0xCC
0xCC
0xCC
0xCC
0x33
0x55
0x33
0x55
0x33
0x55
0x33
0x55
0x33
0x55
0x33
0x55
0x33
0x55
0x33
0x55
0x33
1
1
0
0
1
1
0
0
0
0
1
1
0
0
1
1
0
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
0xE0 : OK
0xE1 : NG
0 ~ 255
reserved Header XOR
(0xFF) Payload
0 ~ 255
reserved (0x00) reserved Header XOR
(0x00) Payload
0xE0 : OK
0xE1 : NG
reserved (0xFF) reserved Header XOR
(0xFF) Payload
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
0xE0 : OK
0xE1 : NG
0 ~ 255
reserved Header XOR
(0xFF) Payload
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
0xE0 : OK
0xE1 : NG
reserved (0xFF) reserved Header XOR
(0xFF) Payload
Set VGA
Adjust H
Position
Ack Set VGA
adjust H
Position
Read VGA
Adjust H
0~100
reserved (0x00) reserved Header XOR
(0x00) Payload
0xE0 : OK
0xE1 : NG
reserved (0xFF) reserved Header XOR
(0xFF) Payload
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
Position
Ack Read
VGA Adjust H
Position
Set VGA
Adjust V
Position
Ack Set VGA
Adjust V
Position
Read VGA
Adjust V
0xE0 : OK
0xE1 : NG
0~100
reserved Header XOR
(0xFF) Payload
0~100
reserved (0x00) reserved Header XOR
(0x00) Payload
0xE0 : OK
0xE1 : NG
reserved (0xFF) reserved Header XOR
(0xFF) Payload
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
Position
Ack Read
VGA Adjust V
Position
Set VGA
Adjust Phase
0xE0 : OK
0xE1 : NG
0~100
reserved Header XOR
(0xFF) Payload
0~100
reserved (0x00) reserved Header XOR
(0x00) Payload
A5
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C
Controlling the Multiple Product
RJ-45
Checksum
(1byte)
Header (5 bytes)
Payload (4 bytes)
# of
Prefix code Prefix code Set Payload
command
payload Command
bytes
data #0
data #1
data #2
CS #0
#0
#1
ID
Type
Ack Set VGA
Adjust Phase
Read VGA
Adjust Phase
Ack Read
VGA Adjust
Phase
0xCC
0x55
0
4
4
4
0x3E
0x3E
0x3E
0xE0 : OK
0xE1 : NG
reserved (0xFF) reserved Header XOR
(0xFF) Payload
0xCC
0xCC
0x33
0x55
1
1
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
reserved Header XOR
(0xFF) Payload
0xE0 : OK
0xE1 : NG
0~100
Set Picture
Reset
Ack Set
Picture Reset
Set Color
0xCC
0xCC
0xCC
0xCC
0xCC
0xCC
0xCC
0x33
0x55
0x33
0x55
0x33
0x55
0x33
0
0
0
0
1
1
0
4
4
4
4
4
4
4
0x3F
0x3F
0x40
0x40
0x40
0x40
0x41
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
reserved (0xFF) reserved Header XOR
(0xFF) Payload
reserved (0x00) reserved Header XOR
(0x00) Payload
reserved (0xFF) reserved Header XOR
(0xFF) Payload
0xE0 : OK
0xE1 : NG
0~100
Ack Set Color
0xE0 : OK
0xE1 : NG
Read Color
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
reserved Header XOR
(0xFF) Payload
reserved (0x00) reserved Header XOR
(0x00) Payload
Ack Read
Color
Set Tint
0xE0 : OK
0xE1 : NG
0 : -50
0~100
...
50 : 0
...
100 : 50
0xE0 : OK
0xE1 : NG
Ack Set Tint
Read Tint
0xCC
0xCC
0xCC
0x55
0x33
0x55
0
1
1
4
4
4
0x41
0x41
0x41
reserved (0xFF) reserved Header XOR
(0xFF) Payload
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
reserved Header XOR
(0xFF) Payload
Ack Read Tint
0xE0 : OK
0xE1 : NG
0 : -50
...
50 : 0
...
100 : 50
Set non-VGA
Horz. Position
Ack Set non-
VGA Horz.
Position
0xCC
0xCC
0x33
0x55
0
0
4
4
0x42
0x42
0~64
reserved (0x00) reserved Header XOR
(0x00) Payload
reserved (0xFF) reserved Header XOR
(0xFF) Payload
0xE0 : OK
0xE1 : NG
Read non-
VGA Horz.
Position
Ack Read
non-VGA
0xCC
0xCC
0x33
0x55
1
1
4
4
0x42
0x42
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
0xE0 : OK
0xE1 : NG
0~64
reserved Header XOR
(0xFF) Payload
Horz. Position
Set non-VGA
Vert. Position
Ack Set non-
VGA Vert.
Position
0xCC
0xCC
0x33
0x55
0
0
4
4
0x43
0x43
0~32
reserved (0x00) reserved Header XOR
(0x00) Payload
reserved (0xFF) reserved Header XOR
(0xFF) Payload
0xE0 : OK
0xE1 : NG
Read non-
VGA Vert.
Position
0xCC
0x33
1
4
0x43
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
A6
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C
Controlling the Multiple Product
RJ-45
Checksum
(1byte)
Header (5 bytes)
Payload (4 bytes)
# of
Prefix code Prefix code Set Payload
command
payload Command
bytes
data #0
data #1
data #2
CS #0
#0
#1
ID
Type
Ack Read
non-VGA
Vert. Position
Set non-VGA
Horz. Size
Ack Set non-
VGA Horz.
Size
0xCC
0x55
1
4
0x43
0xE0 : OK
0xE1 : NG
0~32
reserved Header XOR
(0xFF) Payload
0xCC
0xCC
0x33
0x55
0
0
4
4
0x44
0x44
0~100
reserved (0x00) reserved Header XOR
(0x00) Payload
reserved (0xFF) reserved Header XOR
(0xFF) Payload
0xE0 : OK
0xE1 : NG
Read non-
VGA Horz.
Size
0xCC
0xCC
0x33
0x55
1
1
4
4
0x44
0x44
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
Ack Read
non-VGA
Horz. Size
Set non-VGA
Vert. Size
Ack Set non-
VGA Vert.
Size
0xE0 : OK
0xE1 : NG
0~100
reserved Header XOR
(0xFF) Payload
0xCC
0xCC
0x33
0x55
0
0
4
4
0x45
0x45
0~100
reserved (0x00) reserved Header XOR
(0x00) Payload
reserved (0xFF) reserved Header XOR
(0xFF) Payload
0xE0 : OK
0xE1 : NG
Read non-
VGA Vert.
Size
Ack Read
non-VGA
Vert. Size
Set Color
Temp Red
Offset
Ack Set Color
Temp Red
Offset
Read Color
Temp Red
Offset
Ack Read
Color Temp
Red Offset
Set Color
Temp Green
Offset
Ack Set Color
Temp Green
Offset
Read Color
Temp Green
Offset
Ack Read
Color Temp
Green Offset
Set Color
Temp Blue
Offset
0xCC
0xCC
0xCC
0xCC
0xCC
0xCC
0xCC
0xCC
0xCC
0xCC
0xCC
0x33
0x55
0x33
0x55
0x33
0x55
0x33
0x55
0x33
0x55
0x33
1
1
0
0
1
1
0
0
1
1
0
4
4
4
4
4
4
4
4
4
4
4
0x45
0x45
0x46
0x46
0x46
0x46
0x47
0x47
0x47
0x47
0x48
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
0xE0 : OK
0xE1 : NG
0~100
reserved Header XOR
(0xFF) Payload
0 ~ 255
reserved (0x00) reserved Header XOR
(0x00) Payload
0xE0 : OK
0xE1 : NG
reserved (0xFF) reserved Header XOR
(0xFF) Payload
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
0xE0 : OK
0xE1 : NG
0 ~ 255
reserved Header XOR
(0xFF) Payload
0 ~ 255
reserved (0x00) reserved Header XOR
(0x00) Payload
0xE0 : OK
0xE1 : NG
reserved (0xFF) reserved Header XOR
(0xFF) Payload
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
0xE0 : OK
0xE1 : NG
0 ~ 255
reserved Header XOR
(0xFF) Payload
0 ~ 255
reserved (0x00) reserved Header XOR
(0x00) Payload
A7
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C
Controlling the Multiple Product
RJ-45
Checksum
(1byte)
Header (5 bytes)
Payload (4 bytes)
# of
Prefix code Prefix code Set Payload
command
payload Command
bytes
data #0
data #1
data #2
CS #0
#0
#1
ID
Type
Ack Set Color
Temp Blue
Offset
Read Color
Temp Blue
Offset
Ack Read
Color Temp
Blue Offset
Set Dynamic
Contrast
0xCC
0x55
0
4
4
4
4
0x48
0x48
0x48
0x4B
0xE0 : OK
0xE1 : NG
reserved (0xFF) reserved Header XOR
(0xFF) Payload
0xCC
0xCC
0xCC
0x33
0x55
0x33
1
1
0
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
0xE0 : OK
0xE1 : NG
0 ~ 255
reserved Header XOR
(0xFF) Payload
0 : Off
1 : Low
reserved (0x00) reserved Header XOR
(0x00) Payload
2 : Medium
3 : High
Ack Set
Dynamic
Contrast
Read
Dynamic
Contrast
Ack Read
Dynamic
Contrast
0xCC
0xCC
0xCC
0x55
0x33
0x55
0
1
1
4
4
4
0x4B
0x4B
0x4B
0xE0 : OK
0xE1 : NG
reserved (0xFF) reserved Header XOR
(0xFF) Payload
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
0xE0 : OK
0xE1 : NG
0 : Off
1 : Low
reserved Header XOR
(0xFF) Payload
2 : Medium
3 : High
Set Local
Dimming
Ack Set Local
Dimming
Read Local
Dimming
Ack Read
Local
0xCC
0xCC
0xCC
0xCC
0x33
0x55
0x33
0x55
0
0
1
1
4
4
4
4
0x4C
0x4C
0x4C
0x4C
0 : Off
1 : On
0xE0 : OK
0xE1 : NG
reserved (0x00) reserved Header XOR
(0x00) Payload
reserved (0xFF) reserved Header XOR
(0xFF) Payload
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
reserved Header XOR
(0xFF) Payload
0xE0 : OK
0xE1 : NG
0 : Off
1 : On
Dimming
Set Noise
Reduction
0xCC
0x33
0
4
0x4D
0 : Off
1 : Low
reserved (0x00) reserved Header XOR
(0x00) Payload
2 : Medium
3 : High
Ack Set Noise
Reduction
Read Noise
Reduction
Ack Read
Noise
0xCC
0xCC
0xCC
0x55
0x33
0x55
0
1
1
4
4
4
0x4D
0x4D
0x4D
0xE0 : OK
0xE1 : NG
reserved (0xFF) reserved Header XOR
(0xFF) Payload
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
reserved Header XOR
(0xFF) Payload
0xE0 : OK
0xE1 : NG
0 : Off
1 : Low
Reduction
2 : Medium
3 : High
Set Digital NR
0xCC
0x33
0
4
0x4E
0 : Off
1 : Low
reserved (0x00) reserved Header XOR
(0x00) Payload
2 : Medium
3 : High
Ack Set
Digital NR
Read Digital
NR
0xCC
0xCC
0x55
0x33
0
4
4
0x4E
0x4E
0xE0 : OK
0xE1 : NG
reserved (0xFF) reserved Header XOR
(0xFF) Payload
1
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
A8
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C
Controlling the Multiple Product
RJ-45
Checksum
(1byte)
Header (5 bytes)
Payload (4 bytes)
# of
Prefix code Prefix code Set Payload
command
payload Command
bytes
data #0
data #1
data #2
CS #0
#0
#1
ID
Type
Ack Read
Digital NR
0xCC
0x55
1
4
0x4E
0xE0 : OK
0xE1 : NG
0 : Off
1 : Low
reserved Header XOR
(0xFF) Payload
2 : Medium
3 : High
Set Film
Mode
Ack Set Film
Mode
Read Film
Mode
Ack Read
Film Mode
Set Balance
0xCC
0xCC
0xCC
0xCC
0xCC
0x33
0x55
0x33
0x55
0x33
0
0
1
1
0
4
4
4
4
4
0x4F
0x4F
0x4F
0x4F
0x56
0 : Off
1 : Auto
0xE0 : OK
0xE1 : NG
reserved (0x00) reserved Header XOR
(0x00) Payload
reserved (0xFF) reserved Header XOR
(0xFF) Payload
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
reserved Header XOR
(0xFF) Payload
0xE0 : OK
0xE1 : NG
0 : L50
~
0 : Off
1 : Auto
reserved (0x00) reserved Header XOR
(0x00) Payload
49 : L1
50 : 0
51 : R1
~
100 : R50
0xE0 : OK
0xE1 : NG
Ack Set
Balance
Read Balance
0xCC
0xCC
0xCC
0x55
0x33
0x55
0
1
1
4
4
4
0x56
0x56
0x56
reserved (0xFF) reserved Header XOR
(0xFF) Payload
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
reserved Header XOR
(0xFF) Payload
Ack Read
Balance
0xE0 : OK
0xE1 : NG
0 : L50
~
49 : L1
50 : 0
51 : R1
~
100 : R50
Set Volume
0xCC
0xCC
0xCC
0xCC
0xCC
0xCC
0xCC
0x33
0x55
0x33
0x55
0x33
0x55
0x33
0
0
1
1
0
0
0
4
4
4
4
4
4
4
0x58
0x58
0x58
0x58
0x59
0x59
0x60
0~100
reserved (0x00) reserved Header XOR
(0x00) Payload
reserved (0xFF) reserved Header XOR
(0xFF) Payload
Ack Set
Volume
Read Volume
0xE0 : OK
0xE1 : NG
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
reserved Header XOR
(0xFF) Payload
Ack Read
Volume
Set Sound
Reset
Ack Set
Sound Reset
Set
0xE0 : OK
0xE1 : NG
0~100
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
reserved (0xFF) reserved Header XOR
(0xFF) Payload
reserved (0x00) reserved Header XOR
(0x00) Payload
0xE0 : OK
0xE1 : NG
0: Off
XinemaSound
3D
1: On
Ack Set
XinemaSound
3D
Read
XinemaSound
3D
Ack Read
XinemaSound
3D
0xCC
0xCC
0xCC
0x55
0x33
0x55
0
1
1
4
4
4
0x60
0x60
0x60
0xE0 : OK
0xE1 : NG
reserved (0xFF) reserved Header XOR
(0xFF) Payload
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
0xE0 : OK
0xE1 : NG
0: Off
1: On
reserved Header XOR
(0xFF) Payload
A9
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C
Controlling the Multiple Product
RJ-45
Checksum
(1byte)
Header (5 bytes)
Payload (4 bytes)
# of
Prefix code Prefix code Set Payload
command
payload Command
bytes
data #0
data #1
data #2
CS #0
#0
#1
ID
Type
Set
0xCC
0x33
0
4
4
4
4
4
0x61
0x61
0x61
0x61
0x62
0: Off
1: On
reserved (0x00) reserved Header XOR
(0x00) Payload
XinemaSound
Leveler
Ack Set
XinemaSound
Leveler
Read
XinemaSound
Leveler
Ack Read
XinemaSound
Leveler
0xCC
0xCC
0xCC
0xCC
0x55
0x33
0x55
0x33
0
1
1
0
0xE0 : OK
0xE1 : NG
reserved (0xFF) reserved Header XOR
(0xFF) Payload
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
0xE0 : OK
0xE1 : NG"
0: Off
1: On
reserved Header XOR
(0xFF) Payload
Set Bass
0: -12
…
reserved (0x00) reserved Header XOR
(0x00) Payload
12 : 0
...
24: 12
0xE0 : OK
0xE1 : NG
Ack Set Bass
Read Bass
0xCC
0xCC
0xCC
0x55
0x33
0x55
0
1
1
4
4
4
0x62
0x62
0x62
reserved (0xFF) reserved Header XOR
(0xFF) Payload
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
reserved Header XOR
(0xFF) Payload
Ack Read
Bass
0xE0 : OK
0xE1 : NG
0: -12
…
12 : 0
...
24: 12
Set Treble
0xCC
0x33
0
4
0x63
0: -12
…
reserved (0x00) reserved Header XOR
(0x00) Payload
12 : 0
...
24: 12
0xE0 : OK
0xE1 : NG
Ack Set
Treble
Read Treble
0xCC
0xCC
0xCC
0x55
0x33
0x55
0
1
1
4
4
4
0x63
0x63
0x63
reserved (0xFF) reserved Header XOR
(0xFF) Payload
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
reserved Header XOR
(0xFF) Payload
Ack Read
Treble
0xE0 : OK
0xE1 : NG
0: -12
…
12 : 0
...
24: 12
Set Lip Sync
0xCC
0xCC
0xCC
0xCC
0xCC
0xCC
0xCC
0x33
0x55
0x33
0x55
0x33
0x55
0x33
0
0
1
1
0
0
1
4
4
4
4
4
4
4
0x64
0x64
0x64
0x64
0x65
0x65
0x65
0~5
reserved (0x00) reserved Header XOR
(0x00) Payload
reserved (0xFF) reserved Header XOR
(0xFF) Payload
Ack Set Lip
Sync
Read Lip
Sync
Ack Read Lip
Sync
Set Speakers
0xE0 : OK
0xE1 : NG
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
reserved Header XOR
(0xFF) Payload
reserved (0x00) reserved Header XOR
(0x00) Payload
reserved (0xFF) reserved Header XOR
(0xFF) Payload
0xE0 : OK
0xE1 : NG
0 : Off
0~5
1 : On
Ack Set
Speakers
Read
0xE0 : OK
0xE1 : NG
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
Speakers
A10
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C
Controlling the Multiple Product
RJ-45
Checksum
(1byte)
Header (5 bytes)
Payload (4 bytes)
# of
Prefix code Prefix code Set Payload
command
payload Command
bytes
data #0
data #1
data #2
CS #0
#0
#1
ID
Type
Ack Read
Speakers
Set Audio
Only
Ack Set Audio
Only
Read Audio
Only
Ack Read
Audio Only
Set Digital
Audio Out
0xCC
0x55
1
4
4
4
4
4
4
0x65
0x66
0x66
0x66
0x66
0x67
0xE0 : OK
0xE1 : NG
0 : Off
1 : On
0xE0 : OK
0xE1 : NG
0 : Off
1 : On
reserved Header XOR
(0xFF) Payload
0xCC
0xCC
0xCC
0xCC
0xCC
0x33
0x55
0x33
0x55
0x33
0
0
1
1
0
reserved (0x00) reserved Header XOR
(0x00) Payload
reserved (0xFF) reserved Header XOR
(0xFF) Payload
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
reserved Header XOR
(0xFF) Payload
0xE0 : OK
0xE1 : NG
0 : Off
0 : Off
1 : On
reserved (0x00) reserved Header XOR
(0x00) Payload
1 : Dolby
2 : PCM
Ack Set
Digital Audio
Out
0xCC
0x55
0
4
0x67
0xE0 : OK
0xE1 : NG
reserved (0xFF) reserved Header XOR
(0xFF) Payload
Read Digital
Audio Out
Ack Read
Digital Audio
Out
0xCC
0xCC
0x33
0x55
1
1
4
4
0x67
0x67
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
reserved Header XOR
(0xFF) Payload
0xE0 : OK
0xE1 : NG
0 : Off
1 : Dolby
2 : PCM
Set Analog
Audio Out
Ack Set
Analog Audio
Out
0xCC
0xCC
0x33
0x55
0
0
4
4
0x68
0x68
0 : Fixed
1 : Variable
0xE0 : OK
0xE1 : NG
reserved (0x00) reserved Header XOR
(0x00) Payload
reserved (0xFF) reserved Header XOR
(0xFF) Payload
Read Analog
Audio Out
Ack Read
Analog Audio
Out
0xCC
0xCC
0x33
0x55
1
1
4
4
0x68
0x68
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
reserved Header XOR
(0xFF) Payload
0xE0 : OK
0xE1 : NG
0 : Fixed
1 : Variable
Set Equalizer
0xCC
0xCC
0xCC
0xCC
0x33
0x55
0x33
0x55
0
0
1
1
4
4
4
4
0x69
0x69
0x69
0x69
0 : 120Hz
1 : 500Hz
2: 1.5KHz
3: 5KHz
4: 10KHz
0xE0 : OK
0xE1 : NG
0 : -12
...
12: 0
...
24: 12
0 : 120Hz
1 : 500Hz
2: 1.5KHz
3: 5KHz
4: 10KHz
reserved Header XOR
(0x00) Payload
Ack Set
Equalizer
reserved Header XOR
(0xFF) Payload
Read
Equalizer
0 : 120Hz
1 : 500Hz
2: 1.5KHz
3: 5KHz
4: 10KHz
0xE0 : OK
0xE1 : NG
reserved (0x00) reserved Header XOR
(0x00) Payload
Ack Read
Equalizer
0 : 120Hz
1 : 500Hz
2: 1.5KHz
3: 5KHz
0 : -12 Header XOR
...
12: 0
...
Payload
4: 10KHz
24: 12
A11
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C
Controlling the Multiple Product
RJ-45
Checksum
(1byte)
Header (5 bytes)
Payload (4 bytes)
# of
Prefix code Prefix code Set Payload
command
payload Command
bytes
data #0
data #1
data #2
CS #0
#0
#1
ID
Type
Set OSD
Language
0xCC
0x33
0
4
0x70
0 : English
1 : Spanish
2 : French
3 : Italian
reserved (0x00) reserved Header XOR
(0x00) Payload
4 : Deutsch
5 : Polski
6 : Portuques
7 : Chinese
8 : Japanese
9 : Korean
0xE0 : OK
0xE1 : NG
Ack Set OSD
Language
Read OSD
Language
Ack Read
OSD
0xCC
0xCC
0xCC
0x55
0x33
0x55
0
1
1
4
4
4
0x70
0x70
0x70
reserved (0xFF) reserved Header XOR
(0xFF) Payload
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
reserved Header XOR
(0xFF) Payload
0xE0 : OK
0xE1 : NG
0 : English
1 : Spanish
2 : French
3 : Italian
Language
4 : Deutsch
5 : Polski
6 : Portuques
7 : Chinese
8 : Japanese
9 : Korean
Set ID Setup
0xCC
0xCC
0xCC
0xCC
0x33
0x55
0x33
0x55
0
0
0
0
4
4
4
4
0x73
0x73
0x76
0x76
1~100
reserved (0x00) reserved Header XOR
(0x00) Payload
reserved (0xFF) reserved Header XOR
(0xFF) Payload
reserved (0x00) reserved Header XOR
(0x00) Payload
reserved (0xFF) reserved Header XOR
(0xFF) Payload
Ack Set ID
Setup
Set Power
Indicator
Ack Set
0xE0 : OK
0xE1 : NG
0 : Off
1 : On
0xE0 : OK
0xE1 : NG
Power
Indicator
Read Power
Indicator
Ack Read
Power
0xCC
0xCC
0x33
0x55
1
1
4
4
0x76
0x76
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
reserved Header XOR
(0xFF) Payload
0xE0 : OK
0xE1 : NG
0 : Off
1 : On
Indicator
Set Factory
Reset
Ack Set
Factory Reset
0xCC
0xCC
0xCC
0xCC
0xCC
0xCC
0xCC
0x33
0x55
0x33
0x55
0x33
0x55
0x33
0
0
1
1
1
1
1
4
4
4
4
4
4
4
0x79
0x79
0x90
0x90
0x91
0x91
0xA3
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
reserved (0xFF) reserved Header XOR
(0xFF) Payload
0xE0 : OK
0xE1 : NG
Read Set ID
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
reserved Header XOR
(0xFF) Payload
Ack Read
Set ID
Read F/W
Version
Ack Read
F/W Version
Read Input
Resolution
0xE0 : OK
0xE1 : NG
1~100
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
F/WLeft part F/W Right Header XOR
part Payload
0xE0 : OK
0xE1 : NG
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
A12
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C
Controlling the Multiple Product
RJ-45
Checksum
(1byte)
Header (5 bytes)
Payload (4 bytes)
# of
Prefix code Prefix code Set Payload
command
payload Command
bytes
data #0
data #1
data #2
CS #0
#0
#1
ID
Type
Ack Read
Input
Resolution
0xCC
0x55
1
4
0xA3
Hwidth
bit(11:4)
bit(7:4) Hwidth Vheight Header XOR
bit(3:0)
bit(3:0) Vheight
bit(11:8)
bit(7:0)
Payload
Set CEC
0xCC
0xCC
0xCC
0xCC
0xCC
0x33
0x55
0x33
0x55
0x33
0
0
1
1
0
4
4
4
4
4
0xA5
0xA5
0xA6
0xA6
0xA8
0 : Off
1 : On
0xE0 : OK
0xE1 : NG
reserved (0x00) reserved Header XOR
(0x00) Payload
reserved (0xFF) reserved Header XOR
(0xFF) Payload
Ack Set CEC
Read CEC
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
reserved Header XOR
(0xFF) Payload
Ack Read
CEC
Set CEC
Device
0xE0 : OK
0xE1 : NG
0 : Off
1 : On
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
Search
Ack Set
CEC Device
Search
0xCC
0x55
0
4
0xA8
0xE0 : OK
0xE1 : NG
reserved (0xFF) reserved Header XOR
(0xFF) Payload
Read CEC
Devices
Ack CEC
Device
0xCC
0xCC
0x33
0x55
1
1
4
0xA8
0xA8
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00)
byte1 : LA of device1
OK, others NG byte2~N : OSD name of
Payload
Header XOR
Payload
4+
bit(7:4) : 0 for
bit(3:0) : device
device1(0 for end)
byteN+1 : LA of device2
byteN+2~M : OSD name of
device2(0 for end)
…
number
Set Reset All
Settings
Ack Set Reset
All Settings
Set DHCP
0xCC
0xCC
0xCC
0xCC
0xCC
0xCC
0x33
0x55
0x33
0x55
0x33
0x55
0x33
0x55
0
0
0
0
0
0
1
1
4
4
0xAB
0xAB
0xAC
0xAC
0xAD
0xAD
0xAD
0xAD
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
reserved (0xFF) reserved Header XOR
(0xFF) Payload
0xE0 : OK
0xE1 : NG
4
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
reserved (0xFF) reserved Header XOR
(0xFF) Payload
Ack Set
DHCP
Set Static IP
4
0xE0 : OK
0xE1 : NG
21
4
20 bytes (IP + Subnet Mask + Gateway + Header XOR
DNS1 + DNS2) Payload
reserved (0xFF) reserved Header XOR
(0xFF) Payload
Ack Set Static
IP
Read Static IP 0xCC
0xE0 : OK
0xE1 : NG
4
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
20 bytes (IP + Subnet Header XOR
Ack Read
Static IP
0xCC
22
0xE0 : OK
0xE1 : NG
Mask + Gatway + DNS1
+ DNS2)
Payload
Read Ethernet 0xCC
Status
0x33
0x55
1
1
4
4
0xAE
0xAE
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
0: Disconnected 0: DHCP Header XOR
Ack Read
Ethernet
Status
Set Wide
Mode
0xCC
0xCC
0xE0 : OK
0xE1 : NG
1: Connected 1: Static
IP
Payload
0x33
0
4
0xC2
0 : Normal/Full reserved (0x00) reserved Header XOR
1 : Wide
2 : Zoom
(0x00)
Payload
3 : Stretch/
Panoramic
A13
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C
Controlling the Multiple Product
RJ-45
Checksum
(1byte)
Header (5 bytes)
Payload (4 bytes)
# of
Prefix code Prefix code Set Payload
command
payload Command
bytes
data #0
data #1
data #2
CS #0
#0
#1
ID
Type
Ack Set Wide
Mode
Read Wide
Mode
Ack Read
Wide Mode
0xCC
0x55
0
4
4
4
0xC2
0xC2
0xC2
0xE0 : OK
0xE1 : NG
reserved (0xFF) reserved Header XOR
(0xFF) Payload
0xCC
0xCC
0x33
0x55
1
1
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
0 : Normal/Full reserved Header XOR
0xE0 : OK
0xE1 : NG
1 : Wide
2 : Zoom
(0x00)
Payload
3 : Stretch/
Panoramic
Set Video
System
Ack Set Video
System
Read Video
System
Ack Read
Video System
0xCC
0xCC
0xCC
0xCC
0x33
0x55
0x33
0x55
0
0
1
1
4
4
4
4
0xCC
0xCC
0xCC
0xCC
0 : 60Hz
1 : 50Hz
0xE0 : OK
0xE1 : NG
reserved (0xFF) reserved Header XOR
(0xFF) Payload
reserved (0xFF) reserved Header XOR
(0xFF) Payload
reserved (0x00) reserved (0x00) reserved Header XOR
(0x00) Payload
reserved Header XOR
0xE0 : OK
0xE1 : NG
0 : 60Hz
1 : 50Hz
(0xFF)
Payload
RS232C CheckSum
Checksum
(1byte)
Header (5 bytes)
Payload (4 bytes)
Prefix code Prefix code Set Payload # of payload
command
Set Power
Command
data #0
data #1
data #2
CS #0
#0
#1
ID
Type
bytes
0xCC
0x33
0
4
0x10
"0 : 0ff
1 : On"
reserved reserved Header XOR
(0x00) (0x00) Payload
We can make CheckSum with Header (5 bytes) and Payload(4 bytes).
(Prefix code#0) XOR (Prefix code#1) XOR (Set ID) XOR (Command Payload Type) XOR
(# of Payload bytes) XOR (Command) XOR (data #0) XOR (data #1) XOR (data#2) =
CheckSum
For example:
(0xCC) XOR (0x33) XOR (0x01 = Set ID) XOR (0x00) XOR (0x04) XOR (0x10) XOR (0x01 =
ON) XOR (0x00) XOR (0x00) = 0xEB
A14
Download from Www.Somanuals.com. All Manuals Search And Download.
For detail information about ISF, please
refer web site:
Make sure to read the Safety Precautions
before using the product.
Keep the Owner's Manual(CD) in an
accessible place for future reference.
The model and serial number of the SET
is located on the back and one side of the
SET. Record it below should you ever need
service.
MODEL
SERIAL
Temporary noise is normal when powering
ON or OFF this device.
Download from Www.Somanuals.com. All Manuals Search And Download.
|