LCD Television Users Guide
1080p HDTV
32" class (31.5" Diagonal)
LT-32P300
LT-42P300 42" class (42" Diagonal)
LT-42PM30
42" class (42" Diagonal)
POWER
TIMER
MODE
TV
STB VCR DVD AUDIO
INPUT
V1
TV
V2
V3
DBB
V4
V5
USB
DVD/DVR
TUNER
1
2
5
8
0
3
6
9
4
7
RETURN
+
TUNE
TV
–
CH
+
–
VOL
+
iPod
MUTING
OK
DVR
STATUS
PCON
SOUND
VIDEO
GUIDE
SUB CH
TV/VCR
ML/MTS
SUB T.
DISPLAY
iTV
RM-C1485
TV
®
As an “ENERGY STAR ” partner, JVC has determined that
®
this product or product model meets the “ENERGY STAR ”
guidelines for energy efficiency.
Please read the important notice for energy efficiency on page 7.
Important Note:
In the spaces below, enter the model and serial number of your television (located at the
rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this
guide. Keep this user’s guide in a convenient place for future reference. Keep the carton
and original packaging for future use.
Serial Number:
LCT2518-001A-A
1208TSH-II-IM
Model Number:
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with a cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
15) Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
16) Place the television on a stable, flat surface. Failure to do so can result in the television
falling, causing injury.
17) Do not allow young children to play around or on the television. Do not hang from the TV.
Failure to do so can result in the television falling, causing injury.
18) Do not allow young children to play with the plastic bag that came with the television when
you unpacked it. Failure to do so can result in suffocation, causing injury.
19) Avoid improper installation and never position the unit where good ventilation is
impossible. When installing this TV, distance recommendations must be maintained
between the set and the wall, as well as inside a tightly enclosed area or piece of furniture.
Keep to the minimum distance guidelines shown for safe operation.
200 mm
7 7/8 in
200 mm
7 7/8 in
150 mm
5 7/8 in
150 mm
5 7/8 in
50 mm
2 in
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
20) Cautions for installation
— Do not tilt the TV towards the left or right, or towards the back.
— Install the TV in a corner on the floor so as to keep cords out of the way.
— The TV will generate a slight amount of heat during operation. Ensure that
sufficient space is available around the TV to allow satisfactory cooling.
— Have two people remove the TV from the box with the screen facing away
from you. It's possible your clothing, (such as a belt buckle or button) may
scratch the front of the TV. Do the same when moving the TV to another
location.
21) When attaching to a wall, use the optional JVC wall mounting unit.
For LT-32P300: JVC-XUF-2637 LCD FLAT WALL MOUNT
For LT-42P300 / LT-42PM30: JVC-XUF-2637 LCD FLAT WALL MOUNT
Caution
— Consult qualified installers.
— See the included manual on mounting procedures.
— JVC is not responsible for damages or injuries due to improper mounting.
— Use with other wall mounting unit is capable of resulting in instability or causing possible
injury.
22) Make enough room for inserting and removing the power plug. Place the TV as close
to the outlet as possible. The main power supply for this TV is controlled by inserting or
removing the power plug.
23) Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
24) When this TV is connected to the wall outlet, it is always on standby even when all the LED
lamps are not lit. To shut down the TV, unplug the TV from the wall outlet.
FCC Notice:
Caution: Changes or modifications not expressly approved by party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
– Consult the dealer or an experienced radio/TV technician for help.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
TVPG . . . . . . . . . . . . . . . . . 37
Guide . . . . . . . . . . . . . . . . 37
Warnings . . . . . . . . . . . . . . . . . . 2
ImportantSafetyInstructions . . . 3
PC . . . . . . . . . . . . . . . . . 38
Auto Adjustment . . . . . . . . . . . . . 38
Phase Adjustment . . . . . . . . . . . . 38
PC H-Position . . . . . . . . . . . . . . . . 38
PC V-Position . . . . . . . . . . . . . . . . 38
Reset . . . . . . . . . . . . . . . . . . 38
Getting Started
Key Features . . . . . . . . . . . . . . . 6
Logos & Licenses . . . . . . . . . 7
Package Contents . . . . . . . . . 8
Sound . . . . . . . . . . . . . . . . . 39
MTS . . . . . . . . . . . . . . . . 39
Digital Audio (ML) . . . . . . . . . . . . 39
Surround . . . . . . . . . . . . . . . . 39
Sound Status . . . . . . . . . . . . . . . . 39
Audio Reset . . . . . . . . . . . . . . . . 39
Basics
TVBasicControls . . . . . . . . . . . 13
RemoteControl . . . . . . . . . . . . . 18
InitialSetup . . . . . . . . . . . . . . . 22
Power . . . . . . . . . . . . . . . . . 40
Power Indicator . . . . . . . . . . . . 40
Illumination . . . . . . . . . . . . . . . . 40
Advanced
Customizing your TV . . . . . . . 24
Setting . . . . . . . . . . . . . . . . . 41
Picture . . . . . . . . . . . . . . . . . 26
Video Status . . . . . . . . . . . . . . . . 26
Color Temp . . . . . . . . . . . . . . . . 27
Color Management . . . . . . . . . . . . . 27
Dynamic Gamma . . . . . . . . . . . . . . 27
Smart Picture . . . . . . . . . . . . . . . . 27
Digital VNR . . . . . . . . . . . . . . . . . 27
MPEG NR . . . . . . . . . . . . . . . . . 27
Natural Cinema . . . . . . . . . . . . . . . . . 27
Video Reset . . . . . . . . . . . . . . . . . 27
Plug-In Menu . . . . . . . . . . . . . . . . 41
Time Zone
.
.
.
.
.
.
.
.
.
.
.
.
41
D.S.T. . . . . . . . . . . . . . . . . 41
Language . . . . . . . . . . . . . . . . 41
Noise Mute
.
.
.
.
.
.
.
.
.
.
.
.
41
Front Panel Lock . . . . . . . . . . . . 41
Transparency . . . . . . . . . . . . 41
Auto Shut Off . . . . . . . . . . . . . . . . 41
Control with HDMI . . . . . . . . . . . . . 42
System Info . . . . . . . . . . . . . . . . 42
Auto Demo
Optical Out
PC Smart Input . . . . . . . . . . . 43
Sync Mode . . . . . . . . . . . . . . 43
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
42
43
Display . . . . . . . . . . . . . . . . 28
Video Input Label . . . . . . . . . . . . . . 28
Photo Viewer . . . . . . . . . . . . . . . . 28
Aspect . . . . . . . . . . . . . . . . . . . . 30
Enjoy Movies/Music from your
TV . . . . . . . . . . . . . . . . . 31
Closed Caption . . . . . . . . . . . . . . . . 31
C.C. Type . . . . . . . . . . . . . . . . . . . 31
C.C. Setting . . . . . . . . . . . . . . . . . . . 31
Tuner Mode . . . . . . . . . . . . . . . . 32
Auto Scan . . . . . . . . . . . . . . . . 32
Add Channel . . . . . . . . . . . . . . . . 32
Edit Channel . . . . . . . . . . . . . . . . 33
V-Chip . . . . . . . . . . . . . . . . 33
Password . . . . . . . . . . . . . . . . 34
MPAA . . . . . . . . . . . . . . . . 35
Can. Eng. . . . . . . . . . . . . . . . . 36
Can. Fre. . . . . . . . . . . . . . . . . 36
iPod . . . . . . . . . . . . . . . . . . 44
ProgrammingYourRemote . . . . 51
Etc.
Programming Codes . . . . . . . 53
ConnectingYourDevices . . . . . 58
Troubleshooting . . . . . . . . . . . . 64
Specifications . . . . . . . . . . . . 66
Warranty . . . . . . . . . . . . 67
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Key Features
Your JVC TV is equipped with many features. Here is some key features
highlighted in detail.
1 Simple playback of video and music on
TV. You can charge your iPod. You
can watch a program while listening
to the iPod (source of program must
be from TV’s Internal Tuner). You
can view photos from the iPod while
Dock Adapter
Dock
listening to the iPod.
2 Stunning picture quality via 1920x1080 Full HD panel.
Dynamic Gamma and Color Management give further
fine tuned picture reproduction. Smart Picture adjusts the
best possible picture quality automatically scene by scene
based on the incoming signal from any source!
3 JVC exclusive oblique cone speakers provide excellent
TV sound quality. OmniSurround sound provides you 4
different settings based on the program you are watching.
The equalizer will fine tune your listening preferences.
4 Full connectivity with 3 HDMI, 2 Component, 1 S-video and others. The variety of
connections are explained in pages. 58 to 63.
x 1
x 3
x 2
5 Aspect mode will show every pixel you are getting in High Definition. The Full Native mode
will show 100% of 1080p. Full – with slight overscan. Panorama, Cinema will fill the screen
with various aspect settings.
Full or Widescreen Mode
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Logos & Licenses
®
As an “ENERGY STAR ” partner, JVC has determined that
®
this product or product model meets the “ENERGY STAR ”
guidelines for energy efficiency.
This JVC Television is factory set to “Home” mode, which is optimized for normal home viewing.
This setting reduces power consumption to help the environment and to comply with ENERGY
®
STAR qualification.
Enabling certain features and functionality in this TV (e.g., Video Status) may increase its energy
®
consumption, possibly beyond the limits required for ENERGY STAR qualification.
iPod is a trademark of Apple Inc.,
registered in the U.S. and other countries.
Manufactured under license from Dolby Laboratories. "Dolby", and
the double-D symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI Logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
Notice:
• The open source software is embedded in this product. For more information, please go to:
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Package Contents
AA Batteries x 2
Television x 1
Remote Control x 1
POWER
TIMER
TV
STB VCR DVD AUDIO
INPUT
MODE
V1
TV
V2
V3
DBB
V4
V5
USB
DVD/DVR
TUNER
1
2
5
8
0
3
6
9
4
7
RETURN
+
TUNE
TV
–
CH
+
–
VOL
+
iPod
MUTING
OK
DVR
STATUS
PCON
SOUND
VIDEO
ML/MTS
SUB
GUIDE
SUB CH
TV/VCR
DISPLAY
T
.
iTV
RM-C1485
TV
Bottom Cover x 1
Screw x 1
Insert the batteries
Use two “AA” batteries (included).
Place the "–" end in the unit first, making sure the "+" and "–" markings are correct. Place the
"–" end in the unit first.
If this symbol is shown, it is only
valid in the European Union
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the frame and stand
Your TV has a glossy frame and stand which have protection sheets attached to them. Peel
them off before use, but only after the TV has been properly placed. Take care with handling
the glossy frame and stand because these surfaces are delicate.
Normally, light dusting with a soft, non-scratching duster will keep your TV clean.
If you wish to wipe down the television, first unplug it. Then wipe gently with a soft cloth, slightly
moistened with water. You can add a few drops of mild liquid detergent to the water to help
remove spots of oily dirt.
• DO NOT allow liquid to enter the TV through the ventilation slots.
• DO NOT use strong or abrasive cleaners on the TV.
• DO NOT spray liquids or cleaners directly on the TV’s surface.
• DO NOT rub or scrub the TV harshly. Wipe the set gently with a soft cloth.
Frame
Stand
Caring for the Screen
The screen is treated with an electrostatic-proof coating. When it gets dirty, wipe it gently with a
soft cloth. If the screen is very dirty, wipe it down with a cloth dipped in a diluted kitchen cleaner
and thoroughly wrung-out. Then wipe immediately after with a clean, dry cloth.
• DO NOT apply alcohol, organic solvents (like acetone), acidic or alkaline cleansers to the
screen. These will remove the coating layer and cause discolorations.
• DO NOT push or hit the screen. This could cause scratches on the screen surface and image
distortions.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Package Contents
Avoiding Temporary Burn-in
Displaying fixed images for extended periods of time can leave a subtle but temporary burn-in
image on your screen. To avoid this, mix your viewing pattern.
Examples include, but are not limited to the following:
For example...
• Stock-market report bars
• Shopping channel logos and pricing
displays
TV on
TV off
• Video game patterns or scoreboards
• Bright station logos
• Internet web sites or other computer-style
images
• DVD discs, video tapes, laser discs
• Broadcast, cable, satellite channels or
digital television tuners/converters
XYZ
XYZ
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Install your TV
To prevent the TV from falling, thread the belt through the hole on the back of the stand and
secure it to the TV rack.
Hole
Belt and screw (not included)
Tidying the cables
A cable holder which keeps your connection cables tidy is attached to the back of the stand.
Connect the stand
The LT-32P300 TV stand is not attached to the TV when you purchased it. Please follow the
steps below on how to connect the stand to the TV.
1) Insert the TV stand onto the TV.
2) Tighten the 5 screws to the back of the TV.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Package Contents
Disconnecting the stand
If you disconnect the stand, attach the bottom cover and the screw (supplied) into the hole.
1) Place the TV face down on a soft cloth on a table.
2) Remove the screws from the back of the TV.
3) Pull out the stand from the TV.
4) Cover the hole with the supplied bottom cover and tighten the screw.
Notes:
• To re-install the stand, reverse the procedure from 4) to 1).
• If you find it difficult to remove the screws from inset screw wells, use a magnetized
screwdriver.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Basic Controls
Front Panel
Diffuser Illumination
1
Dock
Notes:
2
1
• Do not use unreasonable force to the
Dock.
• When not using the Dock, close the
cover.
• Do not touch the connector pins of the
Dock or the iPod terminal pins.
• Do not put different devices on the
Dock. It may cause a connection
failure.
2
4
3
Remote Control Sensor
Power Lamp
3
4
Side Panel
Input
Change the input
INPUT
MENU
1
2
1
MENU
2
5
Used to access the TV’s onscreen
menus.
CHANNEL
3
4
+CHANNEL–
Move sequentially through the
channels.
3
OK
VOLUME
+VOLUME–
Raises or lowers the volume.
BACK
4
5
6
POWER
Turn the TV on or off.
POWER
6
PHOTO VIEWER
Photo Viewer Connector
Note:
• Do not use Photo Viewer connector
to connect the iPod
13
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Basic Controls
Rear Panel
8
2
9
3
5
7
4
10
1
6
INPUT 1
INPUT 2
INPUT 3
75 Ω
(VHF/UHF)
HDMI™ Connector
1
* This is used when you are using
HDMI analog audio
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you connect your television to another device, please refer to the proper diagrams for
your specific TV and remote. These will help assist you in understanding how to connect your
television to another device, as well as use the remote to set up your television. Some of the
connection terminals are color coded for easy connection with the proper cables.
To find the best possible connection that your device can use, see pages 16 - 17.
For more detailed information about connecting external devices, see pages 58 - 63.
HDMI
(INPUT 1, 2, or 3)
1
DVD Player
STB (Digital Cable,
satellite) Tuner Box
HDMI ANALOG AUDIO
2
3
5
Composite / Component
(INPUT 4 or 5)
4
Game Console
Video Camera
PC (with HDMI)
S-Video
Antenna / Cable
6
DIGITAL AUDIO
OPTICAL OUT
7
8
AUDIO OUT
Audio System
D-SUB
9
PC
USB type B (for PC)
See page 50.
10
15
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Basic Controls
Video
Best
Video Connection
Connection Cable
TV Connection
HDMI
HDMI Cable
INPUT 1, 2 or 3
DVI – HDMI Cable,
Audio Cable
Input 1 +
HDMI ANALOG AUDIO
DVI + Audio
Component
Component
Video + Audio
Video + Audio
INPUT 4 or 5
S-Video Cable,
Audio Cable
INPUT 4 +
AUDIO Input
S-Video + Audio
Good
Composite
Composite
Video + Audio
Video + Audio
INPUT 4 or 5
Audio
Best
Audio Connection
Connection Cable
TV Connection
OPTICAL AUDIO
Cable
DIGITAL AUDIO
OPTICAL OUT
OPTICAL INPUT
AUDIO INPUT
(L / R)
AUDIO OUT
(L / R)
Audio Cable
Good
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Compatible Signal
Notes
Input
• HDMI (Digital)
HDMI™ (v.1.3, HDMI™ CEC Support)
Please usa a High Speed HDMI™ Cable.
High Speed HDMI™ Cable are tested to
carry an HD signal up to 1080p and higher.
See pages 62, 63.
SD: 480i, 480p
HD : 720p, 1080i, 1080p/24Hz,
1080p/30Hz, 1080p/60Hz
Audio L/R
Input
• DVI (Digital)
SD: 480i, 480p
See page 61, 63.
HD : 720p, 1080i, 1080p/24Hz,
1080p/30Hz, 1080p/60Hz
• Audio L/R (Analog)
Input
• Component (Analog)
SD: 480i, 480p
HD: 720p, 1080i
• Audio L/R (Analog)
See page 59.
Input
• S-Video (Analog)
• Audio L/R (Analog)
See pages 59, 61.
See page 59.
Input
• Composite (Analog)
• Audio L/R (Analog)
Compatible Signal
Notes
Output
• Audio L/R (Digital)
(PCM or Dolby Digital)
See page 60.
Output
• Audio L/R (Analog)
(Fixed)
See page 60.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
The following pages gives you a brief description of each button’s function.
This remote can also control up to four other devices. See pages 51 - 52.
Allows you to set the TV to turn on and set the TV to turn off
automatically after a set amount of time and channel of your choice.
On Timer / Input / Sleep Timer
Timer
On Timer
Input
0 h
0 m
0 - 0
min
Sleep Timer
0
TIMER
Notes:
• If you set the interval of On Timer by pressing the ¥ Š buttons,
select channel at Input and press OK.
• After you set On Timer and turn off the TV, power lamp lights.
• You can check the remaining time of On Timer by displaying
this menu again.
• You can set the interval of Sleep Timer by pressing the ¥ Šꢀ
buttons.
• 60 seconds before the TV turns off, a message will appear and it
will count the remaining time.
• See page 50, “On Timer using iPod”.
POWER
Turns the TV on or off.
Switch between “TV / STB / VCR / DVD / AUDIO devices.
See page 51.
TV
STB VCR DVD AUDIO
MODE
Switch between devices connected to Video-1, 2, 3, 4 and 5. For
V4 (Video-4) and V5 (Video-5) you must select the signal input type
first (ie. composite, S-Video, or component). To do so, you need
to press the V4 or V5 button until the correct type is highlighted.
Select “Composite 1” for composite video signal input, “S-Video”
for S-video signal input, or “Component 1” for component video
signal input. Select “Composite 2” for composite video signal input
or “Component 2” for component video signal input. Select PC for
PC signal input.
V1
V2
V3
V4
V5
1
2
5
8
0
3
4
6
Change channels. Input remote codes. See page 51.
7
9
+
Lets you decide the input channel and select it. After pressing the
remote 0 - 9 buttons, press TUNE.
TUNE
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Has three functions.
POWER
Return – Returns to the channel viewed
just before the channel
TIMER
MODE
TV
STB VCR DVD AUDIO
INPUT
currently onscreen.
Return+ – Lets you program a specific
channel to return to while
scanning through the
V1
V2
V3
V4
V5
TV
DVD/DVR
DBB
TUNER
USB
1
2
5
8
0
3
6
9
channels using the – CH +
button as you memorize the
channel.
RETURN +
TV
4
7
TV – Returns to the TV mode as you are
RETURN +
watching a video, DVD, etc.
TUNE
TV
Note:
• Press TUNE and RETURN+ TV
buttons. This will memorize the
current channel to return to while you
scan through the other channels. To
cancel, press TUNE and RETURN+
TV buttons again.
– CH +
– VOL +
iPod
MUTING
OK
Move sequentially through the channels.
Raise or lower the volume.
– CH +
– VOL +
iPod
Control your iPod connected to the TV.
See page 46.
Turns the TV volume to 0. Press again
to restore the volume.
MUTING
RM-C1485
Used to access the TV’s onscreen
menus. See page 24.
TV
Used to navigate through the TV’s
onscreen menus.
OK
Go back to a previous onscreen menu or
to correct a mistake.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
Allows you to save channels you like so you can view them easily. First you
must register the channels you like.
Favorite
1
2
4
5
6
7
9
11
13
FAVORITE :Add
:Remove
Notes:
• Go to the channel you want to register and press the FAVORITE. A list will
appear. Press the FAVORITE button again to register your channel.
• To view your favorite channels, press FAVORITE. Move ›‚ꢀto select your
channel and press OK.
• To erase your favorite channels, press FAVORITE. Move ›‚ꢀto select your
channel and press ¥ Š
.
• Both analog and digital channels can be registered.
• The channels you registered will appear in numerical order at the top of the
list.
Allows you to adjust the way the image appears on your TV based on the format
that is being received.
Full / Regular / Slim / Panorama / Cinema / Full Native
See page 30.
You can choose several types of sound modes.
Speech / Jazz / Classic / Rock / User
See page 39.
SOUND
VIDEO
GUIDE
Allows you to choose different picture settings according to personal
preferences. You can access this feature for each input (TV, V1, V2, V3, V4,
V5).
Standard / Dynamic / Theater / Game
See page 26.
You can view program information for Digital Channels.
Note:
• The GUIDE will not show the correct time and date depending on the Time
Zone and D.S.T. settings. See page 41.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital broadcast sometimes offers sub channels.
By using the SUB CH button, you can select a
sub channel easily.
SUB CH
TV/VCR
For example, to move to sub channel 123-45:
1) Press 1, 2 and 3 in order
2) Press the SUB CH button
3) Press 4 and 5 in order
4) Press the TUNE button
Allows you to listen to a program in Stereo,
Mono sound or another language (Sap) if
available. First you must set the MODE to TV on
your remote.
Notes:
• When you are receiving a digital broadcast, if
there are other languages, you can change the
language by pressing the ML/MTS button.
• Keep the TV in stereo mode to get the best
sound quality. The sound will work in stereo
mode even if a certain broadcast is in mono
sound only.
ML/MTS
SUB T.
• Choose the mono setting to reduce excessive
noise on a certain channel or broadcast.
• MTS is unavailable if your television’s Input
source is (V1, V2, V3, V4, V5).
• ML/MTS will not work when you are using
HDMI.
DVR
PCON
STATUS
SOUND
VIDEO
GUIDE
SUB CH
TV/VCR
ML/MTS
SUB T.
DISPLAY
DISPLAY
View current channel information.
* See page 52 for buttons that control your external devices.
RM-C1485
TV
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
When you turn on your TV for the first time, the Initial Setup menu appears automatically.
These menus will help you setup your TV with basic information for Language, Time and
Tuner Setup. You can also set this setting in the Plug In Menu.
1) Turn on the TV
POWER
2) Set the language
1 Select a language
2 Select “Next”
Set Language/Langue/Idioma
English
OK
OK
OK
OK
Next
3 Move to next menu
2 Select “Next”
3) Set the mode
Select Home for use at home.
Retail is used in the TV store.
1 Select a mode
Set Mode
OK
Home
Next
3 Move to next menu
3 Select “Next”
4) Set time attribute
1 Change settings
Set Time Attribute
Time Zone
D.S.T.
Atlantic
On
OK
Next
4 Move to next menu
2 Select an item
Time Zone Choose the time zone you live in.
D.S.T.
Changes the clock automatically for daylight
saving time. On / Off
22
Download from Www.Somanuals.com. All Manuals Search And Download.
5) Set TV attribute
1 Change settings
3 Select “Start Scan”
Set TV Attribute
Tuner Mode
Air
OK
OK
Start Scan
Exit
4 Start scanning
channels
2 Select an item
Tuner Mode
Choose Air (antenna) or Cable
Notes:
• If you use a set top box (satellite or cable box), press Exit to skip this step.
• If you want to turn off the Auto Demo, press the MENU button.
“Thank you! Setup is now complete”
Cable Users: After your auto tuner setup is complete, you may, (depending on the type of
hookup), have only 1 channel, usually 2, 3 or 4 in the auto tuner memory. This
is normal.
We have an important note for customers who subscribe to basic cable services (do not have
a separate cable box) and plan to use their JVC TV remote control to select channels.
Once you run the Auto Tuner Setup (which detects and programs all the channels your TV is
receiving through the RF input), every channel number available from your cable company
will appear in your television’s Channel Summary and they will all be marked as available for
scanning. Even though every channel is detected and appears as available, you will only be
able to view those that you specifically subscribe to from your cable company. This will likely
mean there are blank channels between those channels you wish to scan or “surf”.
We apologize for any inconvenience this may cause but it is important to note that this is
not a malfunction of your television. If you want to sequentially scan those channels you
subscribe to without blank ones in between, you can contact your cable company for their
cable box and remote, or manually deselect them using the edit / skip feature on page 33.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing Your TV
You can customize your TV by operating the menus on the TV screen. The TV screen displays
the Menu Bar, Menu Item and available items are highlighted.
Picture
Video Status
Display
TV
Sound
Power
Setting
Standard
Tint
0
0
0
0
0
0
–
–
–
–
–
–
50
25
–
–
–
–
–
–
100
100
100
100
100
100
Color
Menu Bar
Menu Item
Contrast
50
Bright
43
Detail
94
Backlight
50
Color Temp
Color Management
Dynamic Gamma
Smart Picture
Digital VNR
MPEG NR
Natural Cinema
Video Reset
Cool
Off
On
On
High
On
On
Guide
OK
BACK
MENU
:Exit
:Select
:Operate
:Back
Choose from several preset Video modes.
Explanation of function displays
Using the menus
1) Display the menu bar
2) Display the desired menu
Picture
Display
TV
Sound
Power
Setting
Picture
(P. 26)
Display
(P. 28)
TV
(P. 31)
Sound
(P. 39)
Power
(P. 40)
Setting
(P. 41)
1 Press ¥ꢀŠ to select a menu
OK
2 Press ‚ to select a menu item
24
Download from Www.Somanuals.com. All Manuals Search And Download.
3) Change or adjust the setting
1 Press ›‚ to select
Video Status
Tint
Standard
a menu item
0 –
– 100
50
25
OK
0 –
0 –
0 –
0 –
0 –
– 100
– 100
– 100
– 100
– 100
Color
Contrast
50
2 Press ¥ꢀŠ to change the setting
■ To enter an item’s sub menu
Bright
43
Detail
94
Backlight
50
Select
Enter
Color Temp
Color Management
Dynamic Gamma
Smart Picture
Digital VNR
MPEG NR
Natural Cinema
Video Reset
Cool
Off
On
On
High
On
On
OK
OK
Video Input Label
Photo Viewer
Aspect
AIR TV
Full
Thumbnail View
Interval
10
(Example: Photo Viewer)
■ To the previous screen
4) Close the menu
Note:
• Depending on the situation (analog channels, digital channels, video signal format, external
inputs, etc.), some items will be displayed in gray and can not be selected.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing your TV
Picture
Video Status
Choose different display settings according to personal preferences. You can use this feature
with TV, V1, V2, V3, V4 and V5.
Standard
Resets the picture display to the factory settings.
Dynamic
Gives a vivid picture with better contrast when viewing in a brightly lit room.
Theater
Gives a rich, film-like look to video when viewing in a dimly lit room.
Game
Used for when you are playing video games connected to your TV.
Notes:
• Each mode is memorized for each analog TV / composite / S-Video, Digital TV, HDMI,
component signal input.
• Each video status can be chosen along with your favorite picture settings (Tint, Color,
Contrast, Bright, Detail and Backlight).
■ Allows you to change and adjust the way the picture appears on your television.
Tint
Allows you to adjust the levels of red and green on your TV.
Color
Allows you to make all the colors on your TV appear more vivid or subtle.
Contrast
Allows you to adjust the level of black and white on your TV giving you a darker or brighter
picture overall.
Bright
Allows you to adjust the overall brightness of the TV.
Detail
Allows you to adjust the level of fine detail on your TV.
Backlight
Allows you to adjust the brightness of the internal lamp which effects the overall brightness of
the TV.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Color Temp
Allows you to adjust colors to look as accurate as possible. Cool / Natural / Warm
Color Management
Allows you to compensate for dull colors to ensure dull colors are reproduced with natural hues.
On / Off
Dynamic Gamma
Allows you see more detail in very dark or bright areas so these areas don’t appear “muddied”.
Normally, this feature should be left On for optimum picture quality. On / Off
Smart Picture
Allows the TV to adjust the brightness level automatically to a level suitable for what you are
watching. On / Off
Digital VNR
This function can be selected to change the effect of Digital VNR (Video Noise Reduction).
High – Adjusts the effect maximally
Low – Adjusts the effect minimally
Off – Function is turned off.
MPEG NR
This function effects the block noise removal and mosquito NR (Noise Reduction)
simultaneously.
Note:
• When you are receiving digital channels, block noise removal will have no effect.
Natural Cinema
Allows you to compensate for image blurring when the original video you are watching was shot
at 24 frames/sec, and is broadcast at 30 frames/sec. This conversion process is known as
“TELECINE”. On / Off
Notes:
• When you are receiving a 480p, 720p or 1080p signal, Natural Cinema cannot be selected.
• Natural Cinema is only applied for NTSC, SD 480i and HD 1080i signals.
Video Reset
Resets all picture adjustments at once to the default settings, except for Natural Cinema.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing your TV
Display
Video Input Label
Allows you to label all the devices you have connected to the TV that use the VIDEO-1, 2, 3, 4
and 5 inputs.
VCR
DVD
1 Select
PVR
D-VHS
STB
SAT
OK
AMP
GAME
CAM
DISC
2 Set
Blu-ray DVD
Default
Photo Viewer
Photo Viewer allows you to enjoy your digital pictures stored on your USB Mass Storage Class
devices. You can view them on the TV in high quality if USB Mass Storage device is connected
to the Photo Viewer terminal on the TV.
Thumbnail View
1 Select
Photo Viewer
Page
1
OK
j1010001
j1010002
j1010003
j1010004
j1010005
:Select
j1010006
BACK
j1010007
TUNE
j1010008
j1010009
OK
MENU
:Exit
:Operate
:Back
:Slide show
2 Display
When you select Thumbnail view and press OK, a folder or file list will be displayed. Select
your folder by using the ¥ꢀŠ or ›‚ buttons. Choose a picture and press the OK button. It
will now be shown on the screen. To move to the next picture, press the Š button. To move to
the previous picture, press the ¥ button.
* If there is more than 10 images, those images will be shown in the next page. To go to the
next page, select the last image on the page and press the Š or ‚ buttons. To go back to
the previous page, press the ¥ or › buttons.
Slide Show
– In Thumbnail View screen, you can view slide show by pressing the TUNE button.
Photo Viewer with iPod
– In Thumbnail View screen, you can listen to music content stored on your iPod. Start your
iPod to play music, and put it on the TV’s Dock. You cannot operate iPod with TV remote.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY
Display help screen
90º Rotation
(in Slide Show)
Play/Pause
– VOL +
OK
Move to the upper left
Move up
1
Move to the right
Move to the lower left
Move down
6
2
3
7
8
9
Move to the upper right
Move to the left
Reset
Move to the lower right
4
5
M
Enlarge
Reduce
Interval
Choose Slide Show Interval of 5, 10 or 20 seconds by pressing the ¥ꢀŠ buttons.
Notes:
• Gently pull out your USB device from the Photo Viewer terminal after finishing the Photo
Viewer menu.
• Use the supplied USB cable that came with your device. Do not use HUB or USB extension
cable.
• Photo Viewer cannot be guaranteed to work with all USB Mass Storage Devices. It may take
some time to display or it may not display correctly.
notes regarding your devices you wish to connect.
• Supported file formats are “.jpg” or “.JPG”.
• All your stored data should be backed up first as a precaution before connecting to the TV.
• Depending on your stored file size, it can take extra time to display “Photo Viewer” page.
• Depending on your stored file type, some data may not be able to be displayed in the
thumbnail screen.
• You can not display photos using the SD card from the JVC Everio Camera.
Display Continued...
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing your TV
Aspect
Allows you to adjust the way the image appears on your TV based on the format that is being
received.
Regular - When watching a 4:3 aspect
picture without modifying
Full - When watching a 4:3 aspect picture,
it is stretched to fit the dimensions of
the TV. When watching a 16:9 aspect
picture, it displays 95% of the ratio.
the original picture to fit the
dimensions of your 16:9 screen.
Black bars will appear along the
picture’s sides. The picture will be
centered within the boundaries of
the 16:9 screen.
Panorama - When watching a 4:3 aspect
picture it is stretched to fit the
dimensions of the 16:9 aspect
screen.
Cinema - This ratio “zooms in” on
the center part of a 4:3
aspect picture, blowing it up
proportionally to fill the 16:9
screen.
Full Native - This ratio displays 100%
of the ratio. Normally, all
aspects except for Full Native
display about 95%.
Slim - This aspect mode shrinks the
screen of a 16:9 broadcast to 4:3.
There are some programming that
is already stretched by mistake at
broadcasting companies, so this
mode corrects it. Black side bars will
appear.
Notes:
• Depending on the signal format, some aspect modes are unavailable.
• If you change the aspect mode after the television changed it to Full automatically, the
television will change to the aspect mode you choose. It also turns to Full automatically
when the TV receives an HD (1080p, 1080i or 720p) signal.
• In iPod mode, selections of Aspect menu changes to Full / Regular / 16:9 Mini / 4:3 Mini.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
TV
Closed Caption
Allows you to select the mode of the closed caption. First you must set the MODE to either TV,
STB or VCR on your remote. On / Smart / Off
Note:
• Smart caption will appear when you press the MUTING button only on channels where the
broadcast contains closed captioning.
C.C. Type
Allows you to select the type of the closed caption. Basic is for analog channel’s cation, and
Advanced is for digital channel’s caption. Auto / Basic / Advanced
C.C. Setting
You can choose between caption or text in mode to decide how closed captioning will appear.
Analog CC
Digital CC
Font
CC1
Service1
Default
Standard
Default
Default
Default
Default
Default
Off
1 Select
Font Size
Font Style
Text Color
Text Opacity
BG Color
BG Opacity
Edge Color
OK
2 Adjust
Analog CC
Choose the CC feature that you like for analog closed captioning.
Digital CC
Choose the CC feature that you like for digital closed captioning.
Font
Choose the font that you like for closed captioning.
Font Size
Choose how big the text appears in closed captioning.
Font Style
Choose the style of the font in closed captioning.
Text Color
Choose the color of the text in closed captioning.
Text Opacity
Choose how translucent the text appears in closed captioning.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing your TV
BG Color
Choose the background box color for the Closed Captioning text.
BG Opacity
Choose how translucent the background box color for the Closed Captioning text.
Edge Color
Choose the color of the border of the background box color for the Closed Captioning text.
Note:
• The Font, Font Size, Font Style, Text Color, Text Opacity, BG Color, BG Opacity and BG
Color settings will not apply to closed caption of analog channels. In addition, some of these
settings for closed caption for digital channels may or may not be available, depending on the
closed captioning data being broadcast.
Tuner Mode
If you skipped this step in the initial setup or your setup has changed, you can redo your setup
in this menu. Air / Cable
Autoscan
Allows you to scan through all available channels your TV can receive, and memorizes them.
Note:
• The Autoscan is finished when the message “Scanning has completed” appears on the
screen.
Add Channel
Allows you to add analog channels. Regarding digital channels, the only channels that will
appear are the ones that are being broadcast.
1
4
2
5
8
0
3
6
1 Select
Please insert scan
number or range
to
7
9
OK
Start
2 Start
Enter the new channel number
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Edit Channel
Allows you to skip channels when using the + CH – button. “✔” means don’t skip, “ ” means
to skip. You can still access those skipped channels manually using the number buttons on the
remote.
Main Channel List
3-2
CH-2
CH-3
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
3-3
Select
5-0
6-0
OK
6-0
OK
11-0
14-0
22-1 CH-1
36-0
Select to skip or not to skip.
Also, select the channel.
63-0
V-Chip
Allows you to block channels or content that you deem inappropriate for children.
Notes:
• V-CHIP will not work with video signals from VCRs, DVD players, Blu-ray or camcorders
connected to the TV.
• (For Canadian viewers only) V-CHIP is designed specifically for the US and may not work
properly in Canada.
– When entering the password –
When you try and access the V-Chip menu, “Please input password” will appear. Press the
“0” button four times on your remote to access the V-Chip menu for the first time.
1
4
2
5
8
0
3
6
Please input password:
7
9
TV Continued...
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing your TV
– When you lock or unlock channels –
You can lock or unlock ratings as shown below.
1 Select
Password
MPAA
NR
G
PG
PG13
R
Can. Eng.
Can Fre.
TVPG
OK
NC-17
X
2 Lock / Unlock
Note:
• If you lock a rating, any rating that is higher is automatically blocked.
Password
You can change the four digit password using
the number buttons on your remote.
New Password
Confirm Password
* If you forget your password, unplug the TV
from the wall and then plug it back in. Your
password will reset to “0000”
OK
Clear
1) Set a new password
1
4
2
5
8
0
3
6
OK
7
9
+
Next
Enter the four digit number
2) Confirm and set
1
4
2
5
8
0
3
6
OK
OK
7
9
RETURN +
Next
Set
Enter the four digit number
34
Download from Www.Somanuals.com. All Manuals Search And Download.
MPAA
This setting is based on the US Motion Picture
Association of America (MPAA) ratings system.
NR
G
PG
PG13
R
NC-17
X
NR – Not Rated.
Any type of programming that does not contain a rating.
G – General Audience.
Suitable for all ages.
PG – Parental Guidance Suggested.
Suitable for all ages with parental guidance.
PG 13 – Parents Strongly Cautioned.
Intended for viewers 13 years or older.
R – Restricted.
Not recommended for viewers 17 years without parental guidance.
NC-17 – No One Under 17.
Not intended for viewers 17 years or younger.
X – No One Under 18.
Not intended for viewers 18 years or younger.
Viewing Guidelines:
At the beginning of a program, the program will display its rating and the content it contains
(Except for unrated programming).
A program can contain any or all of the following:
V/FV – VIOLENCE/FANTASY VIOLENCE
S – SEXUAL Content
L – Strong LANGUAGE
D – Suggestive DIALOG
TV Continued...
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing your TV
Can. Eng.
This setting is based on the Canada ratings
system.
E
C
C8+
G
PG
14+
18+
E – Exempt.
Any type of programming that does not contain a rating.
C – Intended for children.
Suitable for all ages.
C8+ – Intended for children over 8 years old.
Suitable for all ages over 8 years.
G – General Audience.
May contain material not suited for younger viewers.
PG – Parental Guidance.
May contain material not suited for younger viewers. Parents may consider some content not
appropriate for children 8 - 13 years old.
14+ – 14 Years or Older.
Parents strongly urged to use their discretion in allowing viewing by persons under 14.
18+ – Adult.
Intended for viewers 18 years or older.
Can. Fre.
For instructions on Can. Fre., please see page
36 in the French user’s guide.
E
G
8 Ans+
13 Ans+
16 Ans+
18 Ans+
36
Download from Www.Somanuals.com. All Manuals Search And Download.
TVPG
This setting is based on the US ratings system.
ALL FV
V
S
L
D
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
TV Y – Appropriate for all children.
Intended for all children 2 - 6 years old.
TV Y7 – Appropriate for older children.
Intended for children 7 years or older.
TV G – General Audience.
Suitable for all ages.
TV PG – Parental Guidance Suggested.
Suitable for all ages with parental guidance.
TV 14 – Parents Strongly Cautioned.
Intended for viewers 14 years or older.
TV MA – Mature Audiences Only.
Intended for viewers 18 years or older.
Viewing Guidelines:
In addition to the above ratings, you can also block or allow more specific content (Except for
unrated programming).
A program can contain any or all of the following:
V/FV – VIOLENCE/FANTASY VIOLENCE
S – SEXUAL Content
L – Strong LANGUAGE
D – Suggestive DIALOG
Guide
You can view program information. (Digital channels only)
Note:
• If the programming information is not being broadcast, the guide function has no effect or
may display incorrect information.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing your TV
PC
Notes:
• This menu will replace the TV menu when you connect a PC to your TV terminal. See page
63.
• There are some menus that PC mode can not use. (In Picture and Sound menu)
• As for Aspect in the Display menu, only Regular and Full are available.
• When headphones are used, the Sound menu is not available.
Auto Adjustment
Adjust the screen position automatically.
Note:
• Sometimes Auto Adjustment will not operate properly. Either adjust with the following
functions or change the signal.
Phase Adjustment
Adjust it when noise shows up across the screen. Also, use it when letters become blurry.
PC H-Position
Allows you to adjust the screen position horizontally.
PC V-Position
Allows you to adjust the screen position vertically.
Reset
Resets all PC mode adjustments at once to the default setting.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound
MTS
Allows you to listen to a program in stereo, mono sound or another language (SAP).
(Depending if available in the program) First you must set the MODE to TV on your remote.
Notes:
• When you are receiving a digital broadcast, if there are other languages, you can change the
language by pressing the ML/MTS button.
• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo
mode even if a certain broadcast is in mono sound only.
• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.
• MTS unavailable if your television’s input source is (V1, V2, V3, V4, V5).
• ML/MTS will not work when you are using the HDMI.
Digital Audio (ML)
You can change the language if there are other languages available. (Digital channels only)
Surround
You can select the surround mode you like. Off / Movie / Music / News / Mono
Sound Status
You can choose several types of sound modes. User / Speech / Jazz / Classic / Rock
Note:
• If you select User, you can customize the various sound frequencies.
100Hz / 330Hz / 1KHz / 3.3KHz / 10KHz
Audio Reset
Resets all sound adjustments at once to the default settings.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing your TV
Power
Power Indicator
Allows you adjust the brightness of the blue power indicator light.
High – Light is brightly lit
Low – Light is dimly lit
Off – Light is off
Illumination
Allows you adjust the brightness of the Diffuser Illumination. See page 13.
High – Light is brightly lit
Low – Light is dimly lit
Off – Light is off
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings
Plug In Menu
When you turn on your TV for the first time, the Initial Setup menu appears. If you skip it, or
your setup has changed, you can set it up in this menu anytime.
Time Zone
Choose the time zone you live in and the clock sets automatically.
Atlantic / Eastern / Central / Mountain / Pacific / Alaska / Hawaii
D.S.T.
Adjust your TV’s clock for Daylight Savings. On / Off
Language
Allows you to change the TV’s onscreen menu languages to English, French or Spanish.
Noise Mute
Displays a blank gray screen over channels that are too weak to be received clearly.
On / Off
Front Panel Lock
This allows you to lock the buttons on the side of the TV. On / Off
Transparency
Change the transparency of the menu screens. 1 / 2 / 3 / 4
Auto Shut Off
This function automatically shuts off your TV when there is no signal from the channel while the
TV is on for 10 minutes. On / Off
Settings Continued...
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Customizing your TV
Control with HDMI
If you use a HDMI CEC compatible device, set this setting to “On”.
HDMI CEC (Consumer Electronics Control) allows the TV to connect and control multiple HDMI
CEC enabled devices with a single remote. CEC (Consumer Electronics Control) is an optional
protocol used in HDMI.
• HDMI CEC on this TV is compliant with “High-Definition Multimedia Interface Specification”.
• The TV does not support HDMI CEC functions that are not listed below.
• The TV does not guarantee to support use of all HDMI CEC enabled devices.
• Devices that are not enabled to HDMI CEC cannot be controlled with this TV.
– Control the TV using the HDMI CEC enabled device –
• Turn the TV on and switch to the video source of the operating device.
• Switch to the video source of the operating device.
• Turn the TV off with the HDMI CEC enabled device you are viewing.
• For operating instructions of the device, refer to the device’s manual.
– Control the HDMI CEC enabled device using the TV –
• Turn off the operating device by turning off the TV.
• Some device may not support this function. For more details refer to the device’s manual.
– Send status of the TV to the HDMI CEC enabled device –
• When switching the TV’s external input or channel.
• When switching the TV’s menu language.
• Information regarding behavior of the device when status is received, refer to the external
device’s manual.
If HDMI CEC does not work correctly:
• When HDMI CEC enabled device is connected to INPUT 1, INPUT 2 or INPUT 3 with an
HDMI cable, you may not be able to control TV’s external input. To solve the problem set this
setting to “Off”.
System Info
You can confirm the TV’s software version.
Auto Demo
Auto Demo explains this TV’s features to you.
Notes:
• The Auto Demo mode will start automatically when you set Retail in Initial Setup.
• If you press any button on the television or remote, with the exception of
POWER or MENU, the Auto Demo mode will stop for 30 seconds. After 30 seconds
have passed with no operation, the Auto Demo mode will start again.
• If you want to turn off the Auto Demo, press the MENU button.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Optical Out
You can select the optical digital sound output as PCM or DOLBY DIGITAL when your TV is
connected to an amplifier that has a DOLBY DIGITAL decoder. If you select DOLBY DIGITAL,
you can enjoy listening to 5.1ch sound when watching digital broadcasts. This only applies to
digital channels.
Notes:
• Optical Out can be used for both digital and analog channels.
• If your amplifier does not have DOLBY DIGITAL decoder, select PCM. If you don’t
select PCM, it cannot output the sound from the speakers.
• For connecting an amplifier using the optical output, see page 60.
PC Smart Input
When PC is turned on it will power on TV and put it in PC mode. Any other function is not logical.
Also it is called PC Smart Input in TV menu so it suggest flow from PC to TV.
D-Sub / HDMI / Off
Notes:
• When you use PC Smart Input function with HDMI cable, connect your PC with HDMI
terminal (INPUT 1).
• You cannot use PC Smart Input when Control with HDMI is “On”.
Sync Mode
Lets iTunes synchronize your iPod when USB is connected with computer. When you start
Sync Mode, the menu displays “Start” and after finished, “Exit” is displayed.
Sync Mode
Syncronizing
your iPod
OK
Start
Press OK to start or exit Sync Mode.
Notes:
• You need USB type A - type B cable connector, see page 50.
• Do not detach your iPod when you start Sync Mode.
• When you exit the Sync Mode, make sure your iPod and PC communication has finished.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoy Movies/Music From Your iPod
Compatible iPod Types
* If your iPod is not listed in this chart, it is incompatible with this television.
iPod
4G
photo/color
5G
classic
touch (1G) touch (1G)
(FW:2.0+)
touch 2G
20GB
40GB
20GB
30GB
40GB
60GB
30GB
60GB
80GB
80GB
120GB
160GB
8GB
16GB
32GB
8GB
16GB
32GB
TV Control Mode
Music Play
Video Play
Setting
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔ (3)
✔ (3)
✔ (1)
✔ (3)
✔ (3)
✔ (3)
✔ (3)
Pod Control Mode
Music Play
✔ (1)
✔ (1)
✔ (1)
✔ (1, 2)
✔ (2)
✔ (1, 2)
✔ (2)
Video Play
✔
✔
Photo Slide
Show
✔
✔
✔
✔
✔
✔
✔
✔
Setting
✔
✔
✔ (2)
✔ (2)
Sync Mode
✔
✔
✔
✔
✔
• Some setups will require the selection by using the iPod. (Especially those that require wheel
control).
• Not available except for Music/Video play, Photo Slide Show (Pod Control Mode).
(1) – The registration of “On-The-Go” can be done by using the iPod
(2) – Due to the nature if iPod touch, lock/unlock, Main Menu and the selection of music/video
has to be done using the iPod touch.
(3) – “Shuffle”, “Repeat” and “Audiobook” can be available in TV Control Mode.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
iPod nano
iPod mini
1G
2G
3G
4G
1GB
2GB
4GB
2GB
4GB
8GB
4GB
8GB
8GB
16GB
4GB
6GB
✔
✔
✔
✔
✔
✔
✔
✔ (3)
✔ (1)
✔ (3)
✔ (1)
✔ (3)
✔ (3)
✔ (3)
✔ (1)
✔ (1)
✔ (1)
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoy Movies/Music From Your iPod
By inserting your iPod into the Dock, you can display movies or music on your TV from your
iPod. Also, while inserted you can recharge your iPod.
Ready to play
1) Insert your iPod into the Dock on the front of the TV.
* When you put your iPod on the Dock, please
use the Dock adapter.
* If you have difficulty detaching the Dock
adapter, gently use a flat head screwdriver to
Dock Adapter
remove.
Dock
Notes:
• It is recommended that music, pictures and movies on the iPod be saved on your PC or other
hard drive for backup.
• Please be sure to connect/disconnect the iPod properly from the Dock and use the iPod
without any accessory/case.
• Please do not jiggle the iPod in the Dock to avoid connection failure or damage to the
connector.
2) Press the iPod button on your remote, then the JVC logo will appear
iPod
on the screen of the iPod.
Notes:
• You cannot operate the iPod while the Apple logo appears on the screen of the iPod.
• If your iPod doesn’t work correctly, gently pull out and try again.
3) TV screen will change to the iPod start screen.
1 Select
JVC iPod classic(2)
Music Play
Video Play
Music Shuffle Play
OK
Settings
Now Playing
1
2 Set
4) To exit the menu, press the iPod button. The TV will return to the program you were
watching.
5) When you detach your iPod, while gently holding the base, pull the iPod gently straight
upwards.
Notes:
• If the iPod does not play correctly, please update your iPod software to the latest version.
• Sound distortion may occur when playing back audio sources with high recording levels.
When distortion occurs, it is recommended to turn off the equalizer of the iPod. For
information on operating the iPod, see the iPod instruction manual.
• JVC is not responsible for any loss of or damage to iPod that might result from the use of this
product.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Control Mode
You can operate the iPod by using the TV’s remote control and onscreen menus.
Music Play
Video Play
JVC iPod classic(2)
Music Shuffle Play
Music Play
Video Play
Music Shuffle Play
Settings
Settings
Now Playing
Now Playing (when playing music)
1
Select
Skip to the next/last page
OK
OK
OK
Set
Back to previous menu
Note:
• When Music Play is selected, you can then search by the catagories supported on your
iPod, such as Playlist, Albums, Songs, Podcast etc.
Icons of Music Play screen
Your iPod name
Blinks when communicating with the iPod
Music
Music Play
JVC iPod classic(2)
Shuffle
1
/
334
Songs
Artist
NOWHERE
WHY ARE WE HERE
SOME RANDOM BAND
ROCK
Albums
Album
Genre
Repeat
1
One
1
00:00:43
/
00:06:21
All
* Language Support:
English, French and Spanish
Forward
Play
Rewind
Pause/
Stop
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoy Movies/Music From Your iPod
Music Play / Video Play
file title
Music Play
JVC iPod classic(2)
334
1
/
NOWHERE
WHY ARE WE HERE
SOME RANDOM BAND
ROCK
1
00:00:43
/
00:06:21
SOUND
TIMER
Adjust sound status
Choose Timer
Back to TV
Skip to the next/last song
Back to previous menu
OK
iPod
DISPLAY
Display title (Video Play)
You can view the last program
you were watching while
listening to your iPod (iTV
Mode). Press iTV button when
playing music.
TV’s onscreen menu
(“Picture” and “Sound”)
iTV
Volume
– VOL +
MUTING
Mute
Play
VIDEO
Adjust Video status
(Video Play)
Change the aspect ratio
(Video Play)
Rewind
Forward
iTV
Back to Previous Menu
Pause
iTV (in Music Play mode)
iTV allows you to watch TV and at the same time, listen to the music content on your iPod.
When you are listening to music in Music Play mode, press the iTV button.
VIDEO
Adjust Video status
– CH +
Change channel
Adjust Aspect Ratio
–
V1
V5 Select input
–
0
9
Select a channel.
(See page 18, 21)
RETURN +
TV
Change between iPod’s sound
and TV’s sound
SUB CH
TV/VCR
TUNE
iTV
Back to Music Play screen
Display information
Adjust sound status
SOUND
DISPLAY
Note:
• Basic operations are the same as the operations when playing in Music Play mode.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Music Shuffle Play
This function selects songs randomly.
Note:
• Basic operations are the same as the operations when playing in Music Play mode.
Settings
You can adjust the settings below by pressing the ›‚ and OK buttons.
Shuffle / Repeat / Audiobook
Pod Control Mode
You can operate the iPod using the TV’s remote control and the onscreen of the iPod. Press
the PCON button to switch between Pod Control Mode and TV Control Mode.
PCON
GUIDE
1) Press the PCON button on the remote control. JVC logo will disappear
and the normal screen of your iPod will appear.
2) Operate with TV remote control.
* Operation varies from
iPod type and/or mode.
SOUND
Adjust sound status
OK
VIDEO
Adjust Video status
Adjust Aspect Ratio
Back to previous menu
TV’s onscreen menu
(“Picture” and “Sound”)
TIMER
iPod
Choose Timer
Back to TV
Volume
– VOL +
* Operation varies
from iPod type
and/or mode
MUTING
DISPLAY
Mute
iTV
Exit message
Note:
• TV will display a blank black screen when operating the iPod in Pod Control Mode.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoy Movies/Music From Your iPod
Recharge iPod
While your iPod is connected to the Dock, you have the ability to recharge your iPod. The time
it takes depends on how low your batteries are.
On Timer using iPod
You can set the timer to listen to your iPod music content. After you set On Timer and select
iPod at Input in Timer menu. See page 18. Insert your iPod into the Dock.
Notes:
• If you want to set the timer to listen to your favorite music content, play the music content
operating your iPod and press pause. And put it on the TV Dock. On Timer will start to play
the selected music.
• You cannot play Video content using On Timer function.
PC sync.
You can synchronize your iPod and PC using this TV. Please use USB type A - type B cable
(not supplied) when you connect with SYNC (PC) connector.
SYNC (PC)
Back of the TV
PC
INPUT
1
INPUT
2
INPUT
3
75
Ω
(VHF/UHF)
Notes:
• Make sure you inserted your iPod into the Dock and both PC and TV’s power is on.
• Depending on your PC and USB cable, Sync Mode (page 43) may not operate correctly.
Also, it is not recommended to use a hub between the PC and TV connection.
• For details about syncing with iTunes, refer to your iPod’s manual.
• You can display iTunes screen on TV. See page 63.
Error messages
“iPod not found”
This appears when you press the iPod button
without inserting an iPod.
“Communication failed.
Check Connection”
Insert your iPod again. This is a connection
error.
“File not found”
This appears when your iPod has no files to
play.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Your Remote
You can program your remote control to operate your external devices, using the instructions
and codes on pages 51 - 57.
How to set the codes
1) Manually turn on the device.
2) Change the remote control mode according to the device by pressing the MODE button.
Refer to the following list for which mode to use.
Device
TV
Applied for these devices
JVC brand only
STB
Cable Set Top Boxes, Cable/PVR Combinations, Satellite Set Top Box
DBS/PVR Combination
VCR
DVD
VCR, DBS/PVR Combination, PVR, DVD/PVR Combination
DVD Player, DVD Recorder, Home Theater in a Box, Receiver
Amplifier, Home Theater in a Box, Receiver
AUDIO
3) Find the remote control code for your device. See pages 53 - 57.
4) Set the remote code.
1
4
2
5
8
0
3
6
The mode indicator goes
out for a second, then it
lights.
TUNE
7
9
RETURN +
Press and hold
Enter the four digit number
5) Point the remote at the device and press power. If your device did not turn off or respond, try
another code.
Notes:
• If your device doesn’t respond to any of the codes listed or is not listed, see page 52.
• Some codes may have only limited functions. Try other codes that may have more functions.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Your Remote
Search Code Function
This function searches for codes one by one if none of the codes listed for your device has
worked.
1) Manually turn on the device.
2) Change the remote control mode according to the device. Press MODE to select the correct
mode.
3) Activate the search code function. Press and hold POWER and RETURN+/TV until the mode
indicator blinks.
4) Point the remote at the device and press POWER. If no response, try the next code by
pressing Š and POWER until the device turns off.
5) Press RETURN+/TV to register and set the code. Then the MODE indicator light goes out.
Notes:
• If your remote still doesn’t work with the “Search Code Function”, use the remote that came
with your device. Your TV remote can not be guaranteed to work with all devices, modes or
operations.
Remote Control Functions
POWER
Turns the selected device off
SUB T.
– CH +
Channel Up / Down
Displays Subtitles
Open / Close
Volume Up / Down
– VOL +
TV
STB VCR DVD AUDIO
Changes the remote control mode
MODE
Audio Input
Selection
V1
V2
V3
V4
V5
Playback / Record, etc.
Play
Operates menus
Select
Rewind
Forward
Pause
iTV
Back to
previous
menu
Display
menu
OK
Record
Stop
OK
Download from Www.Somanuals.com. All Manuals Search And Download.
52
Programming Codes
STB mode
Cable Set Top Box
0003, 0008
Satellite Set Top Box
Satellite Set Top Box
ABC
AlphaStar
Chaparral
Coolsat
Crossdigital
DirecTV
0772
0216
1806
1109
Samsung
1377, 1276, 1108,
Americast
Bell South
Digeo
Director
General Instrument
0899
0899
1187
0476
0476, 0810, 0276,
0003
0144
0009, 0273
0476, 0810, 0276,
0003
1109, 1442, 1609
0856
0639, 1639, 1640
0869
1142, 1442
0749, 1749, 0790,
1285
1392, 1640
1806
0724, 0722
1535
1535
0869
0856, 1856
SKY
Sony
1377, 0392, 0566, Star Choice
0639, 1639, 1142, Tivo
0247, 0749, 1749, Toshiba
0724, 0819, 1856,
1076, 1108, 0099, UltimateTV
1109, 1414, 1442, Ultrasat
GoldStar
Hamlin
Jerrold
1609, 1392, 1640
1505, 1005, 0775, US Digital
1170, 1775 USDTV
1505, 1005, 0775, Voom
Uniden
Memorex
Motorola
0000
Dish Network System
Dishpro
1376, 0476, 0810,
0276, 1187
1877, 0237, 0008
0000, 0008, 0107
0000
1305, 0317, 0025
1877, 0877, 0144, GE
0533
0000
0000
0279, 0273
0000
0000, 0144
1877, 0877, 0477,
0008
1006
0003
0276
0003
Pace
1775
Zenith
Panasonic
Paragon
Philips
Echostar
1505, 1005, 0775,
1170, 1775
0775, 1775
0566
DBS/PVR Combination
Expressvu
Pioneer
DirecTV
1377, 0392, 0639,
1142, 1076, 0099,
1392, 1442, 1640
1505, 0775
General Instrument
0869
Pulsar
Quasar
Regal
Runco
Samsung
Scientific Atlanta
GOI
0775, 1775
1535
0819
Hisense
Hitachi
HTS
Dish Network System
Dishpro
1505, 0775
0775, 1775
Echostar
1505, 0775, 1170
0775
Hughes Network Systems 1142, 0749, 1749, Expressvu
1442
Hughes Network Systems 1142, 1442
Humax
iLo
1790
1535
JVC
1170
Sony
Motorola
Philips
0869
1142, 0099, 1442
0392
Starcom
Supercable
Torx
Toshiba
Zenith
JVC
LG
0775, 1170, 1775
1414
Proscan
RCA
Magnavox
Memorex
Mitsubishi
Motorola
Next Level
Panasonic
Pansat
Paysat
Philips
0724, 0722
0724
0749
0869
0869
0247, 0701
1807
0724
1142, 0749, 1749,
0724, 1076, 0722,
0099, 1442
0392, 0566
1535
1392
0000
0000, 0525, 0899
Samsung
Sony
Star Choice
1442
0639, 1640
0869
Cable/PVR Combination
Americast
Digeo
General Instrument
Jerrold
Motorola
Pace
Pioneer
Scientific Atlanta
Sony
Supercable
Zenith
0899
1187
0810
0810
1376, 0810, 1187
1877, 0237
1877, 0877
1877, 0877
1006
Proscan
Proton
RadioShack
RCA
0869
0566, 0855, 0143,
1392
0276
0899
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Codes
VCR mode
VCR
VCR
VCR
ABS
1972
0048, 0209
0000
Fisher
Fuji
Funai
Garrard
0047, 0104, 0046
0035, 0033
0000, 0593, 1593
0000
Marta
Matsushita
0037
0035, 0162, 0227,
1162
1972
0035
Admiral
Adventura
Aiko
0278
Media Center PC
MEI
Aiwa
0037, 0000, 0307, Gateway
1972
0479
0041, 0061, 0106
1972
0278
0035
0240
0037, 0278
0240
GE
0060, 0035, 0240, Memorex
0202, 0760, 0761,
0807, 1035, 1060
0432, 0526
0037, 0209, 0038,
0225, 1237
0035, 0162, 0037,
0048, 0039, 0047,
0240, 0000, 0104,
0209, 0046, 0307,
0479, 1037, 1048,
1162, 1237, 1262
0240, 0043, 0061
0240
Akai
Alienware
America Action
American High
Asha
Go Video
GoldStar
Audiovox
Gradiente
Harley Davidson
Harman/Kardon
0000
MGA
Beaumark
Bell & Howell
Broksonic
0000
0081, 0038
0072
MGN Technology
Microsoft
Mind
0104
1972
1972
0184, 0121, 0209, Harwood
0002, 0479, 1479
0037
0035
0020
0081
0072, 0278
0037, 0278, 1278
0072
0037, 0047, 0240, Hughes Network Systems 0042, 0739
0072, 0271
Headquarter
Hewlett Packard
HI-Q
0046
1972
0047
0037, 0240, 0000,
Minolta
Mitsubishi
0042, 0105
Calix
0081, 0067, 0043,
0041, 0061, 0173,
0807
0035, 0048
0240, 0000
Canon
Capehart
Carver
CCE
Citizen
Colt
Hitachi
0042, 0041, 0105, Motorola
1037
1972
1972
MTC
Multitech
NEC
Howard Computers
HP
0000, 0072
0035, 0037, 0048,
0104, 0067, 0041,
0038, 0008
0037
1972
0240
1972
0035
1062, 0162, 0037,
0048, 0104, 0432,
0593, 1048, 1162,
1262
0184, 0121, 0209,
0002, 0208, 0479,
1479
1062, 0035, 0162,
0225, 0227, 0616,
1035, 1162, 1262
0035, 0037, 0240,
0042, 0038, 1035,
1237
Craig
Humax
0739
1972
1972
0041
Curtis Mathes
0060, 0035, 0162, Hush
0041, 0760, 1035
0240
Nikko
Niveus Media
Noblex
iBUYPOWER
Jensen
JVC
Cybernex
CyberPower
Daewoo
1972
0045, 0067, 0041, Northgate
0008, 0366, 1707, Olympus
1945, 1774, 1775, Optimus
1776, 1777
0037, 0278
0067, 0041, 0038
0045, 0104, 0278,
0020, 0046, 0561,
1278
0020
1972
0042
0739
0039, 0038
0000
0037
Daytron
Dell
Denon
DirecTV
Durabrand
Dynatech
Electrohome
Electrophonic
Emerex
KEC
Kenwood
KLH
Kodak
LG
0072
Orion
0035, 0037
0037, 0045, 0042,
0209, 0038, 1037
1972
0000, 0208
0240, 0072
0037
Panasonic
Penney
Linksys
Lloyd's
Logik
0037
0032
Emerson
0035, 0037, 0184, LXI
0240, 0045, 0000, Magnasonic
0121, 0043, 0209, Magnavox
0002, 0278, 1593,
1479, 1278, 0593,
0561, 0479, 0208, Magnin
0593, 1278
0035, 0039, 0081, Pentax
0000, 0149, 0563, Philco
0593, 1593, 1781
0240
0042, 0105
0035, 0000, 0038
0061
Marantz
0035, 0081
54
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR mode
PVR
VCR
VCR
Philips
0035, 0081, 0000, Symphonic
0563, 0593, 0618, Systemax
0739, 1081, 1181, Tagar Systems
0000, 0593, 1593
1972
1972
Howard Computers
HP
Hughes Network Systems 0739
1972
1972
1266
0037
Tatung
0081, 0045, 0000, Humax
0067, 0041, 0008, Hush
0739
1972
Pilot
Pioneer
Polk Audio
Portland
Presidian
Profitronic
Proscan
0081, 0042, 0067
0081
0020
1593
0240
0060, 0202, 0760, Tivo
0761, 1060
0072
0039
0046
0046
0035, 0162, 1035,
1162
0000, 1037
0037
0037
0366
iBUYPOWER
JVC
Linksys
Media Center PC
Microsoft
1972
1945
1972
1972
1972
1972
1972
1972
0616, 1777
0618, 0739
0880
0614, 0616
0739
0614, 0616
0636, 1972
1972
1972
1972
0618, 0636, 0739
1008, 1972, 1996
1972
Teac
0000, 0041
0035, 0162
0035, 0037, 0000
0000
0618, 0636, 0739, Mind
1996
Technics
Teknika
Thomas
Niveus Media
Northgate
Protec
Pulsar
Quarter
Quartz
Quasar
TMK
Toshiba
0240, 0208
0081, 0045, 0042, Panasonic
0067, 0043, 0041, Philips
0008, 0057, 0366, RCA
0845, 1008, 1145, ReplayTV
1972, 1996
0037, 0240
1972
0240
0045
0038
0045, 0061
0037
Samsung
Sonic Blue
Sony
RadioShack
Radix
Randex
RCA
Totevision
Touch
Unitech
Stack 9
0060, 0035, 0240, Vector
Systemax
Tagar Systems
Tivo
Toshiba
Touch
0000, 0042, 0149, Vector Research
0105, 0106, 0202, Video Concepts
0760, 0761, 0807, Videomagic
0880, 1035, 1060
Videosonic
0240
Realistic
0035, 0037, 0048, Viewsonic
0047, 0000, 0104, Villain
1972
0000
Viewsonic
Voodoo
1972
1972
0046
0614, 0616
1972
Voodoo
Wards
1972
ZT Group
1972
ReplayTV
Ricavision
Runco
0060, 0035, 0048,
0047, 0081, 0240,
0000, 0042, 0072,
0149, 0760
0209, 0072
0035, 0000, 0072
0041, 0038
0039, 0033, 0000,
0209, 0034, 0479,
1139, 1479
1972
DVD/PVR Combination
0000
0039
Samsung
0240, 0045, 0432,
0739, 0760, 1014
0048, 0039
0000, 0067, 0209, Yamaha
0041, 0271, 0479, Zenith
1479
Emerson
White Westinghouse
XR-1000
Sanky
Sansui
Sanyo
Scott
0047, 0240, 0104,
0046
ZT Group
0184, 0045, 0121,
0043
DBS/PVR Combination
1945
Sears
0035, 0037, 0047,
0000, 0042, 0104, Echostar
0046, 0057, 0105, Hughes Network Systems 0739
1237
JVC
1945
0739
0739
Sharp
0048, 0209, 0807, Philips
0848, 1048
0104, 0072
0240
0045, 0072
0614, 0616
0035, 0032, 0033, Alienware
0000, 0034, 0636, CyberPower
0639, 0640, 1032, Dell
1232, 1972
1972
Samsung
Shintom
Shogun
Singer
Sonic Blue
Sony
PVR
ABS
1972
1972
1972
1972
0739
1945
1945
1972
1972
DirecTV
Dish Network System
Echostar
Stack 9
STS
Sylvania
0042
0035, 0081, 0000, Gateway
0043, 0593, 1593, Hewlett Packard
1781
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Codes
DVD mode
DVD Recorder
1416
DVD
DVD
Accurian
Advent
Aiwa
Akai
Alco
1416
1016
0641
0695, 0770, 0899
0790
Magnavox
0503, 0539, 0646, Accurian
0675, 0821, 1268
0539
Apex Digital
1056
1168
1129
0490
0675, 1334
1158
0741, 1158, 1304,
1730
Marantz
Memorex
Microsoft
Mintek
Aspire Digital
CyberHome
Denon
Funai
Gateway
Go Video
0695, 0831, 1270
0522, 1708
0839, 0717
1521, 0521
0741
Allegro
Apex Digital
0869
0672, 0717, 0755, Mitsubishi
0830, 1056, 1061
1023
NAD
NEC
Arrgo
0785
Aspire Digital
Audiovox
Blaupunkt
Blue Parade
Broksonic
Cinea
Cine Vision
Citizen
Coby
1168
0790
0717
0571
0695
0831
0876, 0833, 0869
1277
0778, 1107
0831
Nesa
0717
1402
iLo
JVC
LG
LiteOn
Magnavox
1348
1164
0741
NexxTech
Norcent
Onkyo
Oritron
Panasonic
1003, 1107
0503, 0627
0651
0490, 0703, 1362, Panasonic
1462, 1490, 1762 Philips
0503, 0539, 0646, Pioneer
0675, 0854, 1158, RCA
1260, 1267, 1354
0525, 0571, 0631
1061
0539
0770
0675
1158, 1416, 1440
0646, 0675
0490
0646, 1158
0631
0522
0490, 1470
1158
Philips
Craig
Curtis Mathes
CyberHome
Samsung
Sensory Science
Sharp
Sony
Sylvania
Zenith
1087
Pioneer
0816, 0874, 1023, Polaroid
1024, 1117, 1129 Polk Audio
0784, 0705, 0770, Portland
0833, 0869, 1169, Presidian
0630, 0675
1033, 1431
0675
Daewoo
0741
1172
Prima
1016
Denon
Disney
Durabrand
DVD2000
Emerson
0490, 0634
0675, 1270
1127
0521
0591, 0675, 0821,
1268
Proscan
Pro Vision
Qwestar
RCA
0522
0778
0651
Home Theater in Box
Aiwa
0641
0790
1770, 1771, 1772,
1773
0522, 0571, 0717, Audiovox
0790, 0822, 1022, JVC
1132
Enterprise
ESA
Fisher
Funai
Gateway
GE
Go Video
0591
0821, 1268
0670
0675, 1268, 1334
1158
0522, 0815, 0717
0744, 0715, 0741, Sansui
0783, 0833, 0869, Sanyo
1044, 1075, 1099, Sensory Science
Rio
Rotel
Sampo
Samsung
0869
0623
0752
KLH
Koss
Oritron
0790
0651
0651
0539
0790
0869
0869
0790
0490, 0573, 0744, Polk Audio
0820, 0899, 1044, RCA
1075, 1470
0695
0670, 0695, 0873
1158
Rio
Sonic Blue
Teac
Venturer
0790
1158, 1304, 1730
0741
0717
0582, 0702
0573, 0664, 1247
0672
1500, 1588
1348
0717
1268
0627
0702
Sharp
0630, 0675, 0752,
1256
1117
GoldStar
Greenhill
Harman/Kardon
Hitachi
Hiteker
Humax
iLo
Sharper Image
Sherwood
Shinsonic
Sonic Blue
Sony
0770
0533, 0839
0869, 1099
0533, 1533, 0864,
1033, 1431, 1536
0821
0675, 0821, 1268
0675, 0821
0717, 0790
0490, 0703
0571
Initial
Superscan
Sylvania
Symphonic
Teac
Insignia
Integra
JBL
Jensen
JVC
1016
Technics
0558, 0623, 0867, Theta Digital
1164, 1602, 1770, Tivo
1503
1771, 1772, 1773
0790
0490, 0534
0717, 0790, 1149
0651
Toshiba
0503, 0695, 1045,
1154, 1503, 1515,
1588
0503
0839
Kawasaki
Kenwood
KLH
Urban Concepts
US Logic
Venturer
Xbox
Yamaha
Koss
Lasonic
Lenoxx
LG
0798
1127
0790
0522, 1708
0490, 0539, 0545
0503, 0591, 0741,
0869
0591, 0741, 0869
1058, 1158, 1416, Zenith
1440
LiteOn
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio mode
Amplifier
Receiver
Home Theater in Box
Amstrad
Bose
0078
Koss
1366, 1497
1798
Aiwa
1388, 1641
1563, 1615
1563, 1615
1609
0674
Lasonic
Lenoxx
LG
Amphion Media Works
AMW
Curtis Mathes
Durabrand
GE
0300
1437
1561
1293, 1869
1497
Anam
0078
Liquid Video
Magnavox
Apex Digital
1257, 1430
1390
Harman/Kardon
JVC
0892
1189, 1269, 0531, Audiovox
1514 Bose
1189, 1269, 0891, Cambridge Soundworks
0331
1229, 1933
1370
Left Coast
Lenoxx
Linn
0892
Marantz
1561
1289
Classic
Coby
1352
0269, 0282, 0829
0892, 0269
0264
Mitsubishi
NexxTech
Norcent
Nova
1393
1389
Marantz
NEC
1751
Criterion
Daewoo
Denon
1420
1389, 1751
1389
1250
Optimus
Philips
0300, 0823
0892, 0269
0013, 0300, 0823
0892, 0269
0300, 0823
0264
2832
Onkyo
0135, 0842, 1298, Durabrand
1561
Pioneer
Polk Audio
RCA
1320, 1531
Gateway
Go Video
Initial
1517
Optimus
Oritron
1023, 0531, 1074
1366, 1497
1532
1426
Shure
Panasonic
1308, 1518, 0367, Insignia
1288, 1316, 1548, Integra
1751
Sony
0689, 0815, 1126
0078
1298
Soundesign
Victor
1633, 1763, 1764
JBL
1306
0331
Philips
1189, 1269, 0891, JVC
1266, 1289, 1673
1374, 1495, 1676,
1871
Wards
0078, 0013
0354, 0133
Yamaha
Pioneer
1023, 0014, 0150, KLH
0531, 0630, 1123, Koss
1390, 1412
1366, 1497
1798
1384, 1823
1508
Lasonic
Receiver
Polaroid
Lenoxx
LG
1561
ADC
Aiwa
0531
Polk Audio
1289, 1414
1254
1293, 1869
1497
1405, 0121, 1243, Proscan
Liquid Video
1388, 1641
1512
RCA
1023, 1609, 1254, Magnavox
0531, 1074, 1123, NexxTech
1514
Akai
Alco
1751
1390
1390, 1511
1437
Norcent
Nova
1389, 1751
1389
Amphion Media Works
AMW
1563, 1615
1563, 1615
1609, 1074
1257, 1430
1189
Regent
Rio
1869
Onkyo
1298, 1531
1366, 1497
1288, 1316, 1548,
1633, 1763, 1764
1266, 1673
1384
Anam
Saba
0531, 1519
1295, 1500
1764
Oritron
Panasonic
Apex Digital
Audiotronic
Audiovox
Samsung
Sansui
Sanyo
1390
1251, 1469
0771, 1286
1556
Philips
Pioneer
Polaroid
Polk Audio
RCA
Bose
1229, 0639, 1841, Sharp
1933
1602
1370
0531
1189
1352
1389
1420
1250
1414
Sharper Image
1508
Brix
Sherwood
Shinsonic
Sirius
1517, 1653
1426
1289
Cambridge Soundworks
Capetronic
Carver
1609, 1390, 1511
1437
1602
Regent
Rio
Sonic Blue
Sony
1532, 1869
1869
Classic
1058, 1441, 1258, Saba
1759, 1622, 0474, Samsung
1406, 1558, 1658, Sanyo
1519
Coby
1295, 1500
1469
Criterion
Daewoo
Delphi
1758, 1858, 1958
1023
Sharper Image
1556
Stereophonics
Sherwood
Shinsonic
1517
Denon
1360, 0771, 1142, Sunfire
1313
1426
1660, 2832
0463
Teac
0463, 1074, 1390, Sonic Blue
1532, 1869
0689, 1622, 1558,
1658, 1758, 1858,
1958
Garrard
1528
Sony
Gateway
1517
Technics
Thorens
1308, 1518, 1384
1189
Go Video
1532
Harman/Kardon
0110, 0891, 1304, Toshiba
1788
Teac
1390, 1528
1788
1306
Venturer
Wards
XM
1390
Toshiba
Venturer
Yamaha
Initial
Insignia
Integra
JBL
1426
0014
1390
1751
1406, 1414
1331, 1375
1293
0135, 1298, 1320
0110, 1306
Yamaha
0176, 1176, 1276, Zenith
1331, 1375, 1476
0857, 1293
JVC
0531, 1374, 1495, Zenith
1560, 1676, 1871,
1894
Kenwood
KLH
1313, 1570, 1569
1390, 1412
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your Devices
Notes:
• The following connection diagrams are examples on connecting some of the most common
devices to your TV. Please refer to your device’s instruction manual on other connection
methods or for devices not shown here in this instruction book.
• When you are finished connecting your devices, turn on your TV and devices.
Connect an Antenna or Basic Cable
Cable or Antenna
Output
INPUT 1
INPUT 2
INPUT 3
75 Ω
(VHF/UHF)
TV Rear Panel
Notes:
• If you are able to receive ATSC (Digital terrestrial) signal, High Definition (HD) broadcasting
can be watched.
• All digital broadcasting is not necessary High Definition. Check by pressing the DISPLAY
button.
• Digital broadcasting is not available in all areas.
Connect a Cable Box
CABLE BOX
Cable or Antenna
Output
INPUT 1
INPUT 2
INPUT 3
75
Ω
(VHF/UHF)
IN
OUT
TV Rear Panel
Note:
• To view channels on your cable box, make sure your TV’s channel is set to 2, 3 or 4
(depending on the area you live in).
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect a VCR / DVD Player using Component Video
Green cable is for “Y”
Blue cable is for “PB”
Red cable is for “PR”
TV Rear Panel
(INPUT 4)
Audio Out
Video Out
Y PB PR
L
R
VCR / DVD Player
Notes:
• Green, blue and red are the most common colors for Component Cables. Some models may
vary in color.
• To watch your VCR / DVD player, make sure your TV is displaying INPUT 4 or INPUT 5 by
pressing the V4 or V5 button on your remote control.
Connect a VCR / DVD Player using Composite Video
TV Rear Panel
(INPUT 5)
Yellow cable is for “Video”
White cable is for “L”
Red cable is for “R”
Audio Out
Video Out
Y
L
R
VCR / DVD Player
Notes:
• Yellow, white and red are the most common colors for Composite Cables. Some models may
vary in color.
• To watch your VCR / DVD player, make sure your TV is displaying INPUT 4 or INPUT 5 by
pressing the V4 or V5 button on your remote control.
• If your device has S-Video Output, you can use that instead of using Composite Cables.
Connect INPUT 4 (S-VIDEO) and S-video Output with an S-Video Cable.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your Devices
Connect an Amplifier or Home Theater System
TV Rear Panel
(AUDIO OUT)
Amplifier
or
Home Theater System
Speaker
Speaker
Notes:
• Refer to your amplifier’s or Home Theater System’s manual for more information.
• If you have a device connected to INPUT 1, INPUT 2 or INPUT 3, you will not be able to hear
any audio from the AUDIO OUT on the back of the TV otherwise.
Connect an Amplifier using the DIGITAL AUDIO OPTICAL OUT
TV Rear Panel
(DIGITAL AUDIO OPTICAL OUT)
Amplifier
(with DIGITAL AUDIO OPTICAL INPUT)
Speaker
Speaker
Notes:
• Refer to your amplifier’s manual for more information.
• This terminal can only output digital audio (PCM or DOLBY DIGITAL).
• In order to use the optical output connection, select PCM or DOLBY DIGITAL. See page 43.
• You can not output sound from your DIGITAL AUDIO OPTICAL OUT connection if the audio
source is from your HDMI device.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect a Digital Source Device
TV Rear Panel
INPUT 1
HDMI ANALOG
AUDIO
TV Rear Panel (INPUT 1)
INPUT 1
INPUT 2
INPUT 3
Digital Source Device
L
R
DIGITAL OUT
AUDIO OUT
After the connections have been made,
tighten the screw to secure the cables.
Notes:
• To watch your digital source device, make sure your TV is displaying INPUT 1 by pressing the
V1 button on your remote control.
• This TV can accept 480i, 480p, 720p, 1080i and 1080p signals via HDMI.
• The INPUT 1 HDMI ANALOG AUDIO input can only be used with INPUT 1.
Connect a Camcorder
TV Rear Panel
(INPUT 4)
Camcorder
Notes:
• To watch video from your camcorder, make sure your TV is displaying INPUT 4 or INPUT 5
by pressing the V4 or V5 button on your remote control.
• If your device has S-Video Output, you can use that instead of using Composite Cables.
Connect INPUT 4 (S-VIDEO) and S-video Output with an S-Video Cable.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your Devices
Connect a Blu-ray or HDMI Device
TV Rear Panel (INPUT 2)
INPUT 1
INPUT 2
INPUT 3
Blu-ray / HDMI Compatible Device
Notes:
• To watch your Blu-ray or HDMI device, make sure your TV is displaying INPUT 1, INPUT 2 or
INPUT 3 by pressing the V1, V2 or V3 button on your remote control.
• Some decoders may not respond depending on the equipment that is connected to the HDMI.
• This TV can accept 480i, 480p, 720p, 1080i and 1080p signals via HDMI.
• This JVC television can accept a variety of HD signals, including 720p, 1080i, 1080p/24Hz,
1080p/30Hz and 1080p/60Hz. Please note that in some cases, a Blu-ray may only offer the
choice of 1080/60i or 1080/24p. In this case, it is necessary to choose the 1080/60i output.
Please refer to your Blu-ray manual for complete details on choosing the correct output.
• Some HDMI Output Devices may fail to detect this TV as a 1080p device. If this occurs,
manually select 1080p on the HDMI Output Device.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect a Computer
PC
TV Rear Panel
Or...
PC
TV Rear Panel (INPUT 1)
INPUT
1
INPUT
2
INPUT
3
Notes:
• Make sure your TV is displaying INPUT 1, INPUT 2, INPUT 3 or INPUT 5 by pressing the V1,
V2, V3 or V5 button on your remote control.
• To use PC Smart Input function, see page 43.
• When you connect a PC using HDMI-DVI cable, connect an audio cable to INPUT 1 HDMI
ANALOG AUDIO on the TV.
• Use a D-SUB cable with ferrite cores and no longer than 3 meters to avoid electromagnetic
disturbances.
• Refer to your computer’s manual for more information.
Format
VGA
Resolution
640 x 480
800 x 600
1024 x 768
V. Frequency
(Hz)
H. Frequency
(kHz)
Format
VGA
Resolution
640 x 480
V. Frequency
(Hz)
H. Frequency
(kHz)
60
60
60
31.5
37.9
48.4
60
60
60
60
31.5
37.9
48.4
67.4
SVGA
XGA
SVGA
XGA
800 x 600
1024 x 768
1920 x 1080
D-SUB
FHD
HDMI
Notes:
• Depending on signal quality, some pictures may not be displayed correctly.
• Computers that cannot set the refresh rate to 60 Hz, cannot be used with this TV.
• If you are inputting a PC signal that is invalid, “No signal or Signal can not be displayed” will
appear on the TV screen. It appears when the input is PC and it is a single screen.
• When you connect a PC using an HDMI cable, the TV image may not be displayed correctly.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Refer to the table below to check the condition. If you think that there is a problem, contact the
JVC Service Center where you purchased the television.
There is no power
• See if the power cord became unplugged.
• Check for a blown fuse or circuit breaker or a power outage.
There is no picture or sound
• The antenna could be disconnected.
• The tuner could be set improperly. See page 58.
• The TV station may be having difficulties. Check to see if other stations are working.
• Use the HDMI cable with HDMI logo.
• If you have a device connected to INPUT-1, INPUT-2 or INPUT-3, you will not be able to
hear any audio from the AUDIO OUT on the back of the TV.
• You cannot output audio using the DIGITAL AUDIO OPTICAL OUT when you have digital
sound from an HDMI device connected to the INPUT-1, INPUT-2 or INPUT-3 connection on
the back of the TV.
• This TV can accept 480i (Composite / S / HDMI / Component), 480p, 720p, 1080i and
1080p signals. Please check your settings.
Remote control is not operating properly or at all
• Check to see that the batteries are still working and properly installed.
• Make sure the remote has a clear sight path to the TV.
• You may be too far from the TV. You must be within 23 feet (7 meters).
The power turns off by itself
• Make sure the set did not become unplugged.
• Perhaps the Auto Shut Off is set. See page 41.
• Check to see if the Sleep Timer was set. See page 18.
It does not operate correctly
• This television is operated by a microprocessor. It is possible that external noise or
interference is causing the problem. If the television does not function correctly, remove
the electrical plug from the wall outlet and wait a while before inserting it into the wall outlet
again and operating the television.
The color quality is poor
• Tint and Color may be improperly adjusted. See page 26.
• The Video Status mode may be turned to the wrong setting. See page 26.
There are lines across the picture
• There could be interference from another electrical appliance, such as a computer, another
TV or VCR. Move any such appliances further away from the TV.
The picture is spotted
• There could be interference from a high-wattage appliance, like a hairdryer or vacuum,
operating nearby. Move the antenna away from the appliance or change to a coaxial cable
connection which is less prone to interference.
There are double pictures (ghosts)
• A building or passing airplane can reflect the original signal and produce a second, slightly
delayed one. Adjust your antenna position.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture is snowy (image noise)
• Your antenna may be damaged, disconnected or turned. Check the antenna connection. If
the antenna is damaged, replace it.
Screen is 80% black
• The Closed Caption Text mode is on. Turn it off in the Closed Caption menu, page 31.
Stereo or bilingual programs can’t be heard
• Make sure the MTS settings are correct. See page 39.
Static electricity
• It is normal to feel static electricity if you brush or touch the screen.
You hear occasional crackling sounds
• It is normal for the TV to make crackling sounds when first turned on or off. Unless the
sound or picture become abnormal, this is fine.
The picture is slightly cut off when you use 1080p format only
• Change the picture format setting on your external device to 1080i or other resolution.
The screen disappears except for the menu screen
• This occurs when you select a digital menu when your input source is from the HDMI
connection. Press the MENU button.
My HDMI device doesn’t work or doesn’t work properly
• Please usa a High Speed HDMI™ Cable. High Speed HDMI™ Cable are tested to carry
an HD signal up to 1080p and higher.
No signal or signal can not be displayed
• This OSD appears when the digital channel that you have selected is too weak to receive
or no signal is being detected for that channel.
• It appears when that channel is not receiving a signal and you have the Noise Mute
function Off and you have a single screen. It moves automatically every two seconds to
prevent the screen from burn-in.
• Even if “No signal or signal can not be displayed” appears on the screen, your timer
functions and auto shut off functions that you set, are still active.
The following are not malfunctions.
• The television may make a creaking sound if the temperature of the room or the temperature
of the inside of the television changes. If there is no problem with the screen or sound, then
there is no need to worry.
• The picture may be temporarily disturbed and noise may be seen on the screen if the power
is turned on immediately after it has been turned off. This is not a malfunction.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
LT-42P300
LT-42PM30
LT-32P300
Model
Type
LCD Flat Television
Reception Format
NTSC, BTSC System (Multi-Channel Sound) ATSC Terrestrial, Digital Cable
VHF 2 to 13, UHF 14 to 69 at ATSC,
CATV 135 Sub, Mid, Super, Hyper and Ultra bands at Digital Cable
Reception Range
VHF 2 to 13, UHF 14 to 69 CATV 135 Sub, Mid, Super, Hyper and Ultra bands
(191 channel frequency synthesizer system) at Analog
•
Reception of channel A-5 ("95" of the TV set's on-screen cable channel numbers)
is not recommended for your TV set.
Power Source
AC 120V, 60 Hz
Power Consumption
155W
215W
32 inch / 80.03 cm
measured diagonally,
16:9 ratio
42 inch / 106.73 cm
measured diagonally,
16:9 ratio
Screen Size
Audio Output
Speakers
10W + 10W
4 x 16cm Oblique x 2
5 V, 500 mA
iPod Output
Power
Antenna Terminal
(VHF/UHF,
75 ohms (VHF/UHF)(F-type connector)
ATSC/DIGITAL
CABLE IN)
480i
S (Input 4)
Input 4, 5
Terminal
Y: 1 Vp-p positive, 75 ohms (negative sync provided)
C: 0.286 Vp-p (burst signal), 75 ohms
Video: 1 Vp-p, 75 ohms
Audio: 500 mVrms (-4dBs) high impedance
Input 4, 5 Terminal
1080i / 720p / 480p / 480i
(Component Terminal)
Y: 1 Vp-p positive, 75 ohms (negative sync provided)
PB/PR: 0.7 Vp-p 75 ohms
Video: 1080p / 1080i / 720p / 480p / 480i
Audio: 2ch PCM, 32 / 44.1 / 48 KHz 16 / 20 / 24 bit
Input 1, 2, 3 Terminal
(HDMI Input Terminal)
Analog RGB D-SUB (15 pin) x 1
PC Input Jacks
Audio Output Jacks
(FIX)
FIX : 500mVrms (-4dBs), Low Impedance
Digital Out (optical) x 1
Optical Output
Digital Audio
31 1/4 x 23 1/2 x 9 1/8
39 7/8 x 28 7/8 x 11 5/8
(with stand)
1013.6 x 733.5 x 296
(with stand)
Dimensions (inch/mm)
W X H X D
(with stand)
792 x 595.7 x 230
(with stand)
31 1/4 x 21 1/2 x 4 3/8
(without stand)
39 7/8 x 26 5/8 x 4 1/2
(without stand)
792 x 544.6 x 109.6
(without stand)
1013.6 x 677.3 x 114.8
(without stand)
29.0 / 13.2 (with stand)
49.5 / 22.5 (with stand)
Weight (lbs / kg)
27.1 / 12.3 (without stand)
46.0 / 20.9 (without stand)
Specifications subject to change without notice.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
U.S.A.
Canada
TOLL FREE: 1 (800) 252-5722
TOLL FREE: 1 (800) 964-2650
Remember to retain your Bill of Sales for Warranty Service.
Digital Television Transition Notice:
This device contains a digital television tuner, so it should receive digital over the air TV
programming, with a suitable antenna, after the end of full-power analog TV broadcasting in the
United States on February 17, 2009.
Some older television receivers, if they rely on a TV antenna, will need a TV Converter to receive
over the air digital programming, but should continue to work as before for other purposes (e.g.,
for watching low-power TV stations still broadcasting in analog, watching pre-recorded movies,
or playing video games).
JVC COMPANY OF AMERICA
Division of JVC Americas Corp.
1700 Valley Road
JVC CANADA, INC.
21 Finchdene Square
Scarborough, Ontario
Canada, M1X 1A7
Wayne, New Jersey, 07470
Download from Www.Somanuals.com. All Manuals Search And Download.
|