JVC DVR HM HDS1EU User Manual

ENGLISH

CONTENTS

SAFETY FIRST

Safety Precautions .....................................2

INDEX

INSTALLING YOUR NEW RECORDER

Basic Connection ....................................12

S-VIDEO Connection ...............................13

HDD & S-VHS

VIDEO RECORDER

INITIAL SETTINGS

Auto Set Up .............................................14

Preset Download .....................................16

Language .................................................18

SAT CONTROL SET

Satellite Receiver Control Setting .............19

T-V LINK

T-V Link Functions ..................................21

RECORDING/PLAYBACK ON HDD DECK

Basic Recording .......................................22

Basic Playback ........................................23

Playback with HDD Navigation ..............24

Live Memory Playback ............................26

Playback Features ....................................27

Recording Features ..................................29

RECORDING/PLAYBACK ON VHS DECK

Basic Recording .......................................30

Basic Playback ........................................31

Playback with VCR Navigation ................32

Playback Features ....................................34

Recording Features ..................................37

B.E.S.T. Picture System ............................41

TIMER RECORDING

SHOWVIEW Timer Programming .............42

Express Timer Programming ....................44

Automatic Satellite Programme Recording 47

REMOTE CONTROL FUNCTIONS

EDITING

About Hybrid Navigation ........................51

Modify Information ..................................52

Dubbing ..................................................56

Normal Dubbing (from HDD to VHS) ......58

Normal Dubbing (from VHS to HDD) ......59

Random Assemble Editing .......................60

Edit From A Camcorder ...........................62

Output/Input Set ......................................64

Edit To Or From Another Video Recorder 66

Audio Dubbing ........................................68

–

SYSTEM CONNECTIONS

Connecting To A Satellite Receiver ..........70

Connecting/Using A Decoder ..................72

Connecting/Using A Stereo System ..........73

SUBSIDIARY SETTINGS

Mode Set .................................................74

SHOWVIEW System Setup .......................79

Tuner Set .................................................80

Clock Set .................................................88

TROUBLESHOOTING

QUESTIONS AND ANSWERS

SPECIFICATIONS

LISTE OF TERMS

LPT0606-001A

Download from Www.Somanuals.com. All Manuals Search And Download.

For Italy:

“It is declared that this product, brand JVC, conforms to the Ministry Decree n. 548 of 28 Aug.’95

published in the Official Gazette of the Italian Republic n. 301 of 28 Dec.’95”

The STANDBY/ON ¹button does not completely shut off mains power from the unit, but switches

operating current on and off. “`” shows electrical power standby and “^!” shows ON.

Video tapes recorded with this video recorder in the LP/EP (Long Play/Extended Play) mode cannot be

played back on a single-speed video recorder.

When the equipment is installed in a cabinet or a shelf, make sure that it has sufficient space on all sides to

allow for ventilation (10 cm or more on both sides, on top and at the rear.)

When discarding batteries, environmental problems must be considered and the local rules or laws

governing the disposal of these batteries must be followed strictly.

Failure to heed the following precautions may result in damage to the recorder, remote control or video

cassette.

1. DO NOT place the recorder ...

... in an environment prone to extreme temperatures or humidity.

... in direct sunlight.

... in a dusty environment.

... in an environment where strong magnetic fields are generated.

... on a surface that is unstable or subject to vibration.

2. DO NOT block the recorder’s ventilation openings or holes.

(If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able

to get out.)

3. DO NOT place heavy objects on the recorder or remote control.

4. DO NOT place anything which might spill on top of the recorder or remote control.

(If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.)

5. DO NOT expose the apparatus to dripping or splashing.

6. DO NOT use this equipment in a bathroom or places with water. Also DO NOT place any containers

filled with water or liquids (such as cosmetics or medicines, flower vases, potted plants, cups, etc.) on

top of this unit.

7. DO NOT place any naked flame sources, such as lighted candles, on the apparatus.

8. AVOID violent shocks to the recorder during transport.

MOISTURE CONDENSATION

Moisture in the air will condense on the recorder when you move it from a cold place to a warm place, or

under extremely humid conditions—just as water droplets form in the surface of a glass filled with cold

liquid. Moisture condensation on the head drum will cause damage to the tape. In conditions where

condensation may occur, keep the recorder turned on for a few hours to let the moisture dry.

Download from Www.Somanuals.com. All Manuals Search And Download.

SAFETY FIRST (cont.)

PRECAUTION FOR Hard Disk Drive

1. Before installing the recorder

This recorder has a built-in hard disk drive,

which is a device to read minute magnetic

changes.

2. Before using the recorder

When the power of the unit is on, the hard disc

is constantly rotating at high speed.

This requires you to note the following:

● DO NOT impart vibration or shock.

The inside of the device is precision-built,

which, when installing the recorder, requires

you to note the following:

● DO NOT use the recorder in a location prone to

vibration or dust.

If given a heavy shock, not only is the data recorded

damaged but also the hard disk itself can be

damaged.

● DO NOT allow anything having strong magnetism

or emitting strong electromagnetic waves (cell

phones, etc.) near the recorder.

● DO NOT disconnect the power plug from the wall

outlet when the power of the recorder is on.

If the power supply is cut off while the hard disc is

in operation, it can be damaged or the data stored

on it may be damaged. Be sure to push the power

button before turning off the power.

● DO NOT place the recorder where difference in

temperatures is large (condensation can occur), or

where humidity is high.

– When condensation occurs

Water droplets form on the hard disc or head

drums inside, possibly causing hard disc and

heads to be damaged.

– About condensation

When well-cooled beer is poured into a glass,

water droplets often form around its outside.

This phenomenon is called condensation.

● DO NOT install the recorder where the cooling

fans in its back may be blocked, or where the

recorder may be closed in.

3. While using the recorder

When viewing a program by selecting HDD

(Hard Disk Drive), there occurs a slight time lag

relative to the actual program being broadcast.

This is because pictures received are once

stored on the hard disk, and then played back.

The time lag is about three seconds. If you turn

the power on with the hard disk already

selected, it will take about 30 seconds before

the pictures received appear on the screen. Up

until then, any operation is disabled. But it is not

a malfunction.

● DO NOT use the recorder placed vertically.

NOTE:

The hard disk may produce mechanical noise, but it is not a

malfunction.

Download from Www.Somanuals.com. All Manuals Search And Download.

INDEX

FRONT VIEW

SAT

S-VHS ET

A. DUB

HDD

S-VHS

(M)

–

AUDIO

–

VIDEO

MENU NAVIGATION

S-VIDEO

PAUSE

A STANDBY/ON ¹Button ੬ pg. 14

B Infrared Beam Receiving Window

C Hard Disk Drive Illumination

D MENU Button ੬ pg. 18

E SAT^#Button ੬ pg. 47

N Fast Forward ⁵Button ੬ pg. 27

O Cassette Loading Slot

P Eject Button ੬ pg. 30

Q ^RTYUand OK Buttons (same as ^{r t w e}

buttons on the remote control) ੬ pg. 14

R PR +/– Buttons ੬ pg. 22

S NAVIGATION Button ੬ pg. 24

T HDD mode Indicators ੬ pg. 22

U Front Display Panel ੬ pg. 7

F HDD Button ੬ pg. 22

G Stop ⁸Button ੬ pg. 22

H Play ⁴Button ੬ pg. 23

I Pause ⁹Button ੬ pg. 23

J Record ⁷Button ੬ pg. 22

K S-VHS Button ੬ pg. 30

V VHS mode Indicators ੬ pg. 30

W Audio Dubbing (A.DUB) Button ੬ pg. 69

X S-VIDEO/VIDEO/AUDIO Input Connectors

੬ pg. 62

L Rewind ³Button ੬ pg. 27

M S-VHS ET Button ੬ pg. 39

Y Remote PAUSE Connector ੬ pg. 62

PULL-OPEN

To access covered connectors, pull and open the connector

cover.

Download from Www.Somanuals.com. All Manuals Search And Download.

INDEX (cont.)

REAR VIEW

AV1 (L-1) IN/OUT ENTREE/SORTIE

ANTENNA

ANTENNE

OUT

SORTIE

ENTREE

AUDIO

OUT

SORTIE

SAT CONTROL

CONTROLEUR SAT

IN/DECODER

ENTREE/DECODEUR

AV2 (L-2)

OUT

SORTIE

A ANTENNA IN Connector ੬ pg. 12

B AV1 (L-1) IN/OUT Connector

੬ pg. 12, 66, 70, 71, 72

C S OUT Connector ੬ pg. 13

D Mains Power Cord ੬ pg. 12

E ANTENNA OUT Connector ੬ pg. 12

F AV2 (L-2) IN/DECODER Connector

੬ pg. 19, 66, 70, 71, 72

G SAT CONTROL Connector ੬ pg. 19

H AUDIO OUT (L/R) Connectors ੬ pg. 73

Download from Www.Somanuals.com. All Manuals Search And Download.

FRONT DISPLAY PANEL

VCR

VPS/PDC

A B.E.S.T. Picture System Display ੬ pg. 41

B Symbolic Mode Indicators

C Recording Speed Indicators ੬ pg. 22

D “Timer” Indicator ੬ pg. 43, 45

E Tape Remaining Time Indicator ੬ pg. 38

F VPS/PDC Indicator ੬ pg. 45

G S-VHS Indicator ੬ pg. 39, 75

H VCR Indicator

STILL:

SLOW:

PLAY:

FF/REW VARIABLE

SEARCH:

RECORD:

I “Cassette Loaded” Mark

J Counter/Channel/Clock/Remain Display

RECORD PAUSE:

(The counter can display up to +/– “99:99:99”. If

the playback or recording time exceeds this limit,

the display starts to count from “0:00:00”.)

AUDIO DUBBING:

AUDIO DUBBING PAUSE:

Download from Www.Somanuals.com. All Manuals Search And Download.

INDEX (cont.)

ON-SCREEN DISPLAY (for HDD deck)

When “O.S.D.” is set to “ON” (੬ pg. 78), various operational indicators appear on the TV screen.

A The beginning of the programme

B Playback mode and time

C Recording information

When playing back a recorded programme

(Date, start time, channel and recording speed)

D Time scale of the current programme

(This programme has an hour and a half contents.)

E Current playback point

PLAY 4 0:59:24

06/12 TUE 10:07

PR.

0:00

1:00

2:00

F The end of the programme

G Time scale

H Audio mode

A Time scale around the current time

B Current time

When watching a programme on air

C The beginning point of this programme

(The recorder starts receiving this programme at about

20:30.)

D Length of the time available for Live Memory Playback

E Pointer for current time

PRESENT TIME T 21:32

ON AIR

20:00

21:00

22:00

PR.

(The recorder has been receiving this programme for an

hour.)

F Current channel

A 9 (pause) is pressed at 21:33.

B Pointer for current picture

When pressing PAUSE

C The recorder is now capturing new pictures in this point.

PAUSE 9 21:33

PRESENT TIME T 21:45

20:00

21:00

22:00

PR.

A The time counter using actual time

B Pointer for current picture

When using Live Memory playback

C The recorder is now capturing new pictures in this point.

LIVE MEMORY 4 21:03

PRESENT TIME T 21:46

20:00

21:00

22:00

PR.

A Recording indicator

While recording

B Time scale around the current time

C Current time

D Recording speed

PRESENT TIME T 21:03

21:00 22:00

REC 7

E Start point of the recording

F Length of the time available for Live Memory Playback

G Current recording point

H Audio mode

20:00

PR.

8 9

I Recording channel

Download from Www.Somanuals.com. All Manuals Search And Download.

ON-SCREEN DISPLAY (for VHS deck)

When “O.S.D.” is set to “ON” (੬ pg. 78), various operational indicators appear on the TV screen.

A Operation Mode Indicators

B Tape Speed SP/LP/EP

H Type of Broadcast ੬ pg. 40

I VHS Indicator

J Current Day/Month/Year

K Clock Display

C Tape Direction

D Counter Display

E Tape Remaining Time Indicator ੬ pg. 38

F Audio Mode Display ੬ pg. 36

L Channel Position Number and Station Name/

Auxiliary Input Indicator (L-1, L-2, F-1, DUB or

G Tape Position Indicator

The tape position indicator

appears on the TV screen

when you press 3 or

5 from the Stop mode

or perform an Index Search

(੬ pg. 35). The position of

“q” in relation to “0”

SAT*)

* When “L-2 SELECT” is set to “SAT” (੬ pg. 65), “SAT” appears

instead of “L-2”.

M “Cassette Loaded” Mark

(beginning) or “+” (end)

shows you where you are

on the tape.

Beginning

End

NOTE:

Depending on the type of tape being used, the tape position

indicator may not appear correctly.

Download from Www.Somanuals.com. All Manuals Search And Download.

INDEX (cont.)

A LCD Panel ੬ pg. 42

B HDD Button ੬ pg. 22

REMOTE CONTROL

C TV/CABLE/SAT Button ੬ pg. 49, 50

D AUDIO Button ੬ pg. 28, 36

^ (TV Muting) Button ੬ pg. 49

E LCD PROG Button ੬ pg. 42

F Number Keys ੬ pg. 22, 42

G DAILY Button ੬ pg. 43, 45

H VPS/PDC Button ੬ pg. 43, 45

I Counter Reset 0000 Button ੬ pg. 38

Cancel ^&Button ੬ pg. 42

< Button ੬ pg. 53

J Programme Check ^"Button ੬ pg. 46

K PROG Button ੬ pg. 44

L START +/– Button ੬ pg. 44

M STOP +/– Button ੬ pg. 44

N Rewind ³Button ੬ pg. 27

O Play ⁴Button ੬ pg. 23

P Record ⁷Button ੬ pg. 22

Q Stop ⁸Button ੬ pg. 22, 23

OK Button ੬ pg. 15

R ^{r t}Button ੬ pg. 14

TV PR +/– Button ੬ pg. 49

S S-VHS Button ੬ pg. 30

T STANDBY/ON ¹Button ੬ pg. 14

U Display – –:– – Button ੬ pg. 38

DEL Button ੬ pg. 53

V TV/VCR Button

W NAVIGATION Button ੬ pg. 24

X Transmit

Button ੬ pg. 42

Y WEEKLY Button ੬ pg. 43, 45

Z Timer^#Button ੬ pg. 43, 45

a AUX Button ੬ pg. 63

b MENU Button ੬ pg. 18

c Auto Tracking ^pButton ੬ pg. 36

MODE Button ੬ pg. 22

> Button ੬ pg. 53

d OK Button ੬ pg. 15

Buttons with a small dot on the left side of the name can also

be used to operate your TV. (੬ pg. 49)

INDEX Button ੬ pg. 52

e MEMO Button ੬ pg. 25

f PR +/– Button ੬ pg. 22

g DATE +/– Button ੬ pg. 44

h Fast Forward ⁵Button ੬ pg. 27

i Pause ⁹Button ੬ pg. 27

j ^{w e}Button ੬ pg. 18, 27

TV ^%+/– Button ੬ pg. 49

Download from Www.Somanuals.com. All Manuals Search And Download.

How To Use

The remote control can operate most of your video recorder’s functions, as well as basic functions of TV sets and satellite receivers

of JVC and other brands. (੬ pg. 49, 50)

● Point the remote control toward the receiving window.

● The maximum operating distance of the remote control is about 8 m.

NOTES:

● When inserting the batteries, be sure to insert in the correct directions as indicated under the battery cover.

● If the remote control doesn’t work properly, remove its batteries, wait a short time, replace the batteries and then try again.

Remote Control LCD

The remote control can operate not only the video recorder but also some of your TV and satellite receiver’s functions. The LCD

indicates which of these (VIDEO, TV or CABLE/SAT) the remote control can currently operate. When you first purchase the remote

control, or after you have just replaced the batteries, VIDEO A (A code) is selected.

A To operate your video recorder, first press the HDD or S-VHS. To

switch the remote control’s A/B/C/D code, refer to page 48.

B To operate your TV, first press TV/CABLE/SAT until “TV” appears

on the LCD. (੬ pg. 49)

C To operate your satellite receiver, first press TV/CABLE/SAT until

“CABLE SAT” appears on the LCD. (੬ pg. 50)

NOTES:

Even if “TV” is displayed on the LCD, the following operations can be performed without switching the mode.

● Basic operations for the recorder

After an operation is completed, “TV” reappears on the LCD.

● Express timer programming and SHOWVIEW timer programming operations

To perform a TV operation again, switch to TV mode first.

● Accessing main menu

To perform a TV operation again, switch to TV mode first.

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLING YOUR NEW RECORDER

It’s essential that your video recorder be properly

connected.

Basic Connection

THESE STEPS MUST BE COMPLETED BEFORE ANY

VIDEO OPERATION CAN BE PERFORMED.

Aerial connector

A ^{Check the contents.}

Back of TV

Make sure the package contains all of the accessories

listed in “SPECIFICATIONS” on page 98.

TV aerial cable

B ^{Situate the recorder.}

Place the recorder on a stable, horizontal surface.

C ^{Connect the recorder to TV.}

21-pin SCART

connector

A Disconnect the TV aerial cable from the TV.

B Connect the TV aerial cable to the ANTENNA IN

connector on the rear panel of the recorder.

C Connect the provided RF cable between the

ANTENNA OUT connector on the rear panel of the

recorder and the TV’s aerial connector.

21-pin SCART

cable

RF cable

(provided)

D Connect the provided 21-pin SCART cable between

the AV1 (L-1) IN/OUT connector on the rear panel of

the recorder and the TV’s 21-pin SCART connector.

● The AV1 (L-1) IN/OUT connector accepts and delivers either a

composite signal (regular video signal) or a Y/C signal (a signal

in which the luminance and chrominance signals are

separated). If your TV’s 21-pin AV input connector (SCART) is

compatible with the Y/C signal, set “L-1 OUTPUT” to

“S-VIDEO” after the connection and the initial settings are

completed (੬ pg. 64). You can obtain high-quality S-VHS

pictures. (For connection, be sure to use a 21-pin SCART cable

that is compatible with the Y/C signal.)

AV1 (L-1)

IN/OUT

Mains power cord

● Set your TV to the VIDEO (or AV), Y/C, or RGB mode

according to the type of your TV’s SCART connector.

● For switching the TV’s mode, refer to the instruction manual of

your television.

● To obtain high-quality S-VHS pictures, you can also use the

S-VIDEO connection described on page 13.

Back of recorder

ANTENNA

OUT

ANTENNA

Mains outlet

D ^{Connect the recorder to mains.}

ATTENTION:

Plug the end of the mains power cord into a mains outlet.

Your TV must have a 21-pin AV input connector

(SCART) for the connection to the recorder.

After the connection is completed, perform “Auto Set

Up” on page 14.

Download from Www.Somanuals.com. All Manuals Search And Download.

S-VIDEO Connection

Back of TV

Aerial connector

S-VIDEO IN

connector

S-Video cable

(not provided)

AUDIO IN connectors

TV aerial cable

Audio cable

(not provided)

Mains power cord

S OUT

ANTENNA IN

AV1 (L-1) IN/OUT ENTREE/SORTIE

ANTENNA

ANTENNE

OUT

SORTIE

(DV/VHS)

ENTREE

AUDIO

(DV/VHS)

OUT

SORTIE

SAT CONTROL

CONTROLEUR SAT

IN/DECODER

AV2 (L-2)

OUT

SORTIE

ENTREE/DECODEUR

Back of recorder

Mains outlet

AUDIO OUT

ANTENNA OUT

RF cable (provided)

8 To connect to a TV with S-VIDEO/AUDIO IN

connectors . . .

NOTES:

● You can obtain high-quality S-VHS pictures.

● If your TV is not stereo-capable, use the recorder’s AUDIO

OUT connectors to connect to an audio amplifier for Hi-Fi

stereo sound reproduction. (੬ pg. 73)

● To operate the recorder with your TV using the S-VIDEO

connection, set your TV to its AV mode.

● For switching the TV’s mode, refer to the instruction manual of

your television.

A ^{Connect the recorder to TV.}

A Connect the aerial, recorder and TV as per “Basic

Connection” (੬ pg. 12).

B Connect the recorder’s S OUT connector to the TV’s

S-VIDEO IN connector.

C Connect the recorder’s AUDIO OUT connectors to the

TV’s AUDIO IN connectors.

After the connection is completed, perform “Auto Set

Up” on page 14.

B ^{Connect the recorder to mains.}

Plug the end of the mains power cord into a mains outlet.

Download from Www.Somanuals.com. All Manuals Search And Download.

INITIAL SETTINGS

Before starting, make sure of the following:

● The TV aerial cable should be connected to the recorder.

● The recorder’s mains power cord should be connected to a

mains outlet.

Auto Set Up

● If you want to use the on-screen display, the TV should be

set to its AV mode.

Auto Channel Set/Auto Clock Set/

Auto Guide Program Number Set

A ^{Turn on the recorder.}

After the 1 button on the recorder or remote control is

pressed for the first time to power on the recorder, by simply

selecting your country*, the Auto Set Up function sets the

tuner channels, clock** and Guide Program numbers

automatically.

Press 1 on the recorder or remote control. The Country

Set display appears on the front display panel and/or on

the TV screen.

* If you live in Belgium (BELGIUM) or Switzerland (SUISSE), you also

need to select your language.

* If you live in Hungary (MAGYARORSZÁG), Czech Republic (CESKÁ

REPUBLIKA), Poland (POLSKA) or other countries in Eastern Europe

(OTHER EASTERN EUROPE), set the clock manually.

NOTE:

For a few seconds after you

pressed 1, you can not stop

Auto Set Up, even if you press

MENU to cancel this procedure.

B ^{Select your country.}

On the front display panel

Press rt to select your international telephone country

code of your country referring to the chart in the left

column.

(Example) DEUTSCHLAND (49) is selected.

On the on-screen display

Press rt to move the

highlight bar (pointer) to your

country’s name.

International Telephone Country Code

BELGIUM

NORGE

ÖSTERREICH

POLSKA

PORTUGAL

SUISSE

SUOMI

SVERIGE

OTHER WESTERN EUROPE

OTHER EASTERN EUROPE

NOTES:

CESKÁ REPUBLIKA

DANMARK

DEUTSCHLAND

ESPAÑA

● If you have selected BELGIUM (32) or SUISSE (41), go to step

351

358

– –

● If you have selected MAGYARORSZÁG (36), CESKÁ

REPUBLIKA (42), POLSKA (48) or OTHER EASTERN EUROPE

(EE), press OK. The Clock Set screen appears. Set the clock

manually (੬ pg. 88), then go to step D.

● If you have selected any other country name (code), press OK

and go to step D.

GREECE

ITALIA

MAGYARORSZÁG

NEDERLAND

Download from Www.Somanuals.com. All Manuals Search And Download.

● If you are using the on-screen

display, the AUTO SET

screen will appear. As Auto

Set Up progresses, the “q”

mark on the TV screen

moves from left to right.

When the Auto Set Up is

completed, “SCAN

C ^{Select the language.}

display panel and/or on the TV screen.

On the front display panel

Press rt to select your language code.

Press OK. The Language Set display appears on the front

COMPLETED” appears for

about 5 seconds, then the

normal screen appears.

Language Code

Beginning

End

ENGLISH

NEDERLANDS

SVENSKA

NORSK

DEUTSCH

FRANCAIS

ITALIANO

CASTELLANO

● If you have connected the recorder to a TV offering T-V Link

via a 21-pin SCART cable (੬ pg. 12) and the TV is turned on,

the recorder automatically performs “Preset Download”

(੬ pg. 16) even if you select “Auto” in step D.

SUOMI

DANSK

(Example) DEUTSCH (02) is selected for SUISSE (41).

International telephone

Language code

country code

ATTENTION

Once you have performed Auto Set Up, even if the recorder’s

memory backup has expired, all the stored stations and their

Guide Program numbers remain in the recorder’s memory

and the recorder will not perform Auto Set Up again. You

only need to set the clock. (੬ pg. 88)

On the on-screen display

DANSK

If you have moved to a different area, perform each setting as

required.

● Tuner Set (੬ pg. 80)

● Clock Set (੬ pg. 88)

If a new station starts broadcasting in your area, perform

tuner setting (੬ pg. 80).

SUOMI

Press rt to move the

NORSK

highlight bar (pointer) to the

SVENSKA

NEDERLANDS

language of your choice.

CASTELLANO

ITALIANO

FRANCAIS

DEUTSCH

ENGLISH

NOTES:

● In the area where no TV station transmits a PDC (Programme

Delivery Control) signal, the recorder can perform neither

Auto Clock Set nor Auto Guide Program Number Set.

● If there is a power cut, or if you press 1 or MENU while Auto

Set Up is in progress, Auto Set Up will be interrupted; be sure

to turn off the recorder power once and try again from step A.

● Auto Clock Set may not function properly depending on the

reception condition.

● If no sound accompanies the picture or the audio sounds

unnatural on some channels that have been stored by Auto Set

Up, the TV system setting for those channels may be incorrect.

Select the appropriate TV system for those channels

(੬ pg. 86, “INFORMATION”).

D ^{Perform Auto Set Up.}

the front display panel and/or on the TV screen.

On the front display panel

Press rt to select “Auto” and press OK or e.

Press OK. The AUTO SET/T-V LINK display appears on

On the on-screen display

Press rt to move the

highlight bar (pointer) to

“AUTO SET” and press OK or

“Auto” blinks on the front display panel; do NOT press

any button on the recorder or remote control until the

front display panel shows clock time, “(CH) 1” or

“– –:– –” as illustrated on page 17.

Download from Www.Somanuals.com. All Manuals Search And Download.

INITIAL SETTINGS (cont.)

If you have connected the recorder to your TV via a 21-pin

SCART cable (੬ pg. 12), the recorder will automatically

perform Preset Download instead of the Auto Set Up in step D

on page 15. After downloading, the recorder sets the clock and

Guide Program numbers automatically.

Preset Download

Auto Channel Set by Downloading

from TV/Auto Clock Set/Auto Guide

Program Number Set

Perform steps A to C of “Auto Set Up” on page 14 before

continuing.

A ^{Perform Preset Download.}

Press OK. The AUTO SET/T-V LINK display appears on

ATTENTION

the front display panel and/or on the TV screen.

You can use this function only with a TV offering T-V Link,

etc.* Be sure to use a fully-wired 21-pin SCART cable.

* Compatible with TVs offering T-V Link, EasyLink, Megalogic,

SMARTLINK, Q-Link or DATA LOGIC via fully-wired 21-pin SCART

cable. The degree of compatibility and available functions may

differ by system.

On the front display panel

Press rt to select “CH – –” and press OK or e.

On the on-screen display

Press rt to move the

highlight bar (pointer) to

“T-V LINK” and press OK or

Preset positions on the front display panel increase from

“CH1”; do NOT press any button on the recorder or remote

control until the front display panel shows clock time,

“(CH) 1” or “– –:– –” as illustrated on page 17.

● If you are using the on-screen

display, the T-V LINK screen

will appear. Then the GUIDE

PROG SET screen will appear

during Guide Program

Number Set. When Preset

Download is completed,

“COMPLETED” appears for

about 5 seconds, then the

normal screen appears.

NOTES:

● For details, refer to the instruction manual of your TV.

● In the area where no TV station transmits a PDC (Programme

Delivery Control) signal, the recorder can perform neither

Auto Clock Set nor Auto Guide Program Number Set.

● If there is a power cut, or if you press 1 or MENU while

downloading or set up is in progress, it will be interrupted; be

sure to turn off the recorder power once and try again from the

beginning.

● If you press any button on the

recorder or remote control

while downloading is in

progress, it will be interrupted.

● Auto Clock Set may not function properly depending on the

reception condition.

● On this recorder, the characters available for station names

(ID) are A–Z, 0–9, –, f, + and I (space). Some names of

downloaded stations may differ from those of your TV

(੬ pg. 85).

Download from Www.Somanuals.com. All Manuals Search And Download.

Results of Auto Set Up/Preset Download appear on the front display panel

If both Auto Channel Set and Auto Clock Set have been performed successfully, the

correct current time is displayed.

Turn on the TV and select its AV mode, then make sure that all necessary stations have been stored

in the recorder’s memory by using the PR button(s).

● If station names (ID – ੬ pg. 87) have also been stored in the recorder’s memory, the station name

will be displayed at the top left corner of the TV screen for about 5 seconds when the recorder is

tuned to a different station.

● If you want to set the tuner manually such as to add or skip channels, to change channel

positions, or to set or change station names, see pages 82 – 87.

If Auto Channel Set has succeeded but Auto Clock Set has not, “1” (channel position) is

displayed.

A Turn on the TV and select its AV mode, then make sure that all necessary stations have been

stored in the recorder’s memory by using the PR button(s).

● If station names (ID – ੬ pg. 87) have also been stored in the recorder’s memory, the station name

will be displayed at the top left corner of the TV screen for about 5 seconds when the recorder is

tuned to a different station.

● If you want to set the tuner manually such as to add or skip channels, to change channel

positions, or to set or change station names, see pages 82 – 87.

B Perform “Clock Set” on page 88.

If both Auto Channel Set and Auto Clock Set have failed, “– –:– –” is displayed.

Make sure the cables are connected properly and turn off the recorder’s power once, then turn the

recorder’s power back on again.

The Country Set display appears on the front display panel and/or on the TV screen; perform “Auto

Set Up” on page 14 or “Preset Download” on page 16 again.

IMPORTANT

● To check if the Guide Program numbers have been set correctly, perform the SHOWVIEW Timer Programming (੬ pg. 42).

● In certain reception conditions, station names may not be stored correctly, and auto Guide Program Number Set may not work

properly. If the Guide Program numbers are not set properly when you timer-record a TV programme using the SHOWVIEW

system, the recorder will record a TV programme of a different station. When programming the timer using the SHOWVIEW

system, be sure to check the desired channel is selected correctly (੬ pg. 42, “SHOWVIEW^®Timer Programming”).

● Your video recorder memorizes all detected stations even if reception of some of them is poor. You can delete those stations with

an unacceptable picture (੬ pg. 83, “Delete A Channel”).

INFORMATION

Language for the on-screen display

Auto Set Up also selects the language automatically for the on-screen display depending on the Country setting you have made in

step B on page 14 (unless you have selected BELGIUM or SUISSE), as shown below.

SUOMI

DANMARK

DANSK

NEDERLAND

NEDERLANDS

ENGLISH

]

PORTUGAL

DEUTSCHLAND

POLSKA

ENGLISH

DEUTSCH

ENGLISH

NORSK

ÖSTERREICH

CESKÁ REPUBLIKA

ITALIA

DEUTSCH

ENGLISH

ITALIANO

ENGLISH

CASTELLANO

GREECE

OTHER WESTERN EUROPE

OTHER EASTERN EUROPE

ENGLISH

NORGE

SVERIGE

MAGYARORSZÁG

ESPAÑA

SVENSKA

If you want to change the language setting manually, see “Language” on page 18.

Just Clock

Your recorder is equipped with the Just Clock function which provides accurate time keeping through automatic adjustments at

regular intervals, by reading data from a PDC signal. If you want to take advantage of this function, simply set it to “ON”

(੬ pg. 88, “Just Clock”).

Download from Www.Somanuals.com. All Manuals Search And Download.

INITIAL SETTINGS (cont.)

This recorder offers you the choice to view on-screen

messages in 10 different languages. Though Auto Set Up

selects the language automatically (੬ pg. 17), you can

change the language setting manually as required.

Language

Turn on the TV and select the AV mode.

A ^{Access the Main Menu screen.}

Press MENU.

B ^{Access the Tuner Set screen.}

HDD/VCR SET UP FUNCTION SET UP INITIAL SET UP

A Press w e to move the

TUNER SET

INITIAL SET

arrow to “INITIAL SET

UP”, then press t or OK.

B Press w e to move the

arrow to “TUNER SET”,

then press OK.

TUNER SET

AUTO CH SET

MANUAL CH SET

INDEX

SELECT WITH

THEN PRESS [OK]

SELECT OK EXIT

C ^{Access the Country Set screen.}

Press rt to move the

TUNER SET

highlight bar (pointer) to

“AUTO CH SET”, then press

AUTO CH SET

MANUAL CH SET

OK or e.

D ^{Select your country.}

Press rt to move the highlight bar (pointer) to your

country’s name, then press OK or e.

E ^{Select the language.}

Press rt to move the

DANSK

SUOMI

highlight bar (pointer) to the

NORSK

SVENSKA

language of your choice.

NEDERLANDS

● You do not have to press OK;

CASTELLANO

pressing OK enters AUTO SET/

ITALIANO

FRANCAIS

DEUTSCH

ENGLISH

T-V LINK screen.

[MENU] : EXIT

F ^{Return to the normal screen.}

Press MENU.

Download from Www.Somanuals.com. All Manuals Search And Download.

SAT CONTROL SET

The following procedure is required if you receive

satellite channels through a satellite receiver.

Satellite Receiver

Control Setting

Approximately 20 seconds before the SHOWVIEW timer

programming (੬ pg. 42) or Express timer programming

(੬ pg. 44) starts, the recorder sets its input mode to “L-2”

and automatically switches the satellite receiver’s

channels using the provided Satellite Controller.

Installing Satellite Controller

Satellite receiver

A ^{Situate the Satellite Controller.}

Place the Satellite Controller so that the path between its

transmitter and the satellite receiver’s remote sensor is

unobstructed.

B ^{Attach the Satellite Controller.}

Fix securely using the adhesive strip attached on the back

of the Satellite Controller.

Satellite Controller

Your recorder

(suggested locations)

C ^{Make connections.}

Be sure to connect the recorder’s AV2 (L-2) IN/DECODER

connector to the satellite receiver’s 21-pin SCART

connector.

Satellite Controller

Transmitter

NOTE:

When connecting your satellite receiver, refer to its instruction

manual.

Satellite receiver

D ^{Connect the Satellite Controller to recorder.}

Connect the Satellite Controller to the SAT CONTROL

connector on the rear panel.

21-pin SCART cable

(provided)

SAT CONTROL

Back of recorder

AV2 (L-2) IN/DECODER

Download from Www.Somanuals.com. All Manuals Search And Download.

SAT CONTROL SET (cont.)

C ^{Access the Initial Set screen.}

HDD/VCR SET UP FUNCTION SET UP INITIAL SET UP

A Press w e to move the

arrow to “INITIAL SET

UP”, then press t or OK.

B Press w e to move the

arrow to “INITIAL SET”,

then press OK.

TUNER SET

INITIAL SET

CLOCK SET

GUIDE PROG SET

SAT CONTROL SET

INDEX

SELECT WITH

THEN PRESS [OK]

SELECT OK EXIT

D ^{Access the Sat Control Set screen.}

Press rt to move the

highlight bar (pointer) to

“SAT CONTROL SET”, then

press OK or e.

E ^{Enter the satellite receiver’s brand.}

Press the appropriate number

keys to enter the brand code

from the list on page 21, then

press OK.

● If the brand code you entered

is invalid, the code field will

be reset. Enter the correct

brand code again.

● If the recorder is in playback or

recording mode, you cannot

set the brand code.

Setting satellite receiver's brand and

channel

Select the satellite receiver’s channel for

testing.

Press the appropriate number

keys to enter one of the

channel positions on the

satellite receiver, then press

OK.

● You can select the channel

position between 1 to 999.

● After pressing OK, the recorder

enters the Test mode.

After installation, set the satellite receiver’s brand and

channel correctly; otherwise, the Satellite Controller

cannot work correctly.

Turn on the TV and select the AV mode.

A ^{Turn on the satellite receiver.}

Turn on the satellite receiver’s power.

Access the Main Menu screen on the

recorder.

Press MENU.

Download from Www.Somanuals.com. All Manuals Search And Download.

SAT CONTROL SET (cont.)

T-V LINK

G ^{Check the result of the test.}

T-V Link Functions

If the satellite receiver’s

channel number has been

changed to the same one as

you set in step F ...

When you connect the recorder to your TV via a fully-wired

21-pin SCART cable (੬ pg. 12), the following functions are

available. You can use these functions only with a TV offering

T-V Link, etc.*

Press rt to move the

highlight bar (pointer) to

“CHANGED TO ...”, then

press OK or e to finish the

Sat Control Set mode.

For details, refer to the instruction manual of your TV.

* Compatible with TVs offering T-V Link, EasyLink, Megalogic,

SMARTLINK, Q-Link or DATA LOGIC via fully-wired 21-pin SCART

cable. The degree of compatibility and available functions may differ by

system.

If the satellite receiver’s channel number has not been

changed correctly ...

Press rt to move the highlight bar (pointer) to “NOT

CHANGED”, then press OK or e. Then perform the

procedure again from step E.

TV Auto Power On

The TV will turn on and be set to its AV mode automatically

whenever you play a tape.

For details, refer to the instruction manual of your TV.

BRAND NAME

CODE

JVC

AMSTRAD

CANAL SATELLITE

CANAL +

D-BOX

60, 61, 62, 63, 92

VCR Auto Standby

You can use your TV’s remote control to turn off the recorder.

For details, refer to the instruction manual of your TV.

ECHOSTAR

ECHOSTAR (VIA DIGITAL)

FINLUX

78, 79, 80

FORCE

Direct Rec

GALAXIS

GRUNDIG

HIRSCHMANN

ITT NOKIA

JERROLD

KATHREIN

LUXOR

64, 65

64, 78

You can easily start recording the programme that you are

watching on your TV. When you use this function, set “DIRECT

REC” to “ON” (੬ pg. 78).

70, 71

MASCOM

MASPRO

NOKIA

PACE

65, 67, 74, 86, 92

PANASONIC

PHILIPS

66, 84

RFT

SAGEM

SALORA

SIEMENS

SKYMASTER

TPS

TRIAX

WISI

NOTES:

● The Satellite Controller may not work with all types of satellite

receiver.

● For some satellite receivers, you need to set its channel input

mode to 2-digit.

● If your satellite receiver has more than two channel modes, be

sure to set to “All Channel Mode”. For details, refer to the

instruction manual of the satellite receiver.

● When selecting the satellite receiver’s channel (੬ step F),

signals from the remote control may interfere with signals

transmitted from the Satellite Controller. In this case, move the

remote control as close to the recorder’s infrared beam

receiving window as possible.

Download from Www.Somanuals.com. All Manuals Search And Download.

RECORDING/PLAYBACK ON HDD DECK

A ^{Turn on the recorder.}

● The button corresponding to the previously selected deck

lights on the recorder.

Basic Recording

Press 1.

● Turn on the TV and select the AV mode.

● If the recorder is turned on with HDD deck selected,

there may be about 30 seconds’ delay in starting to

show pictures on the screen.

B ^{Select the HDD deck.}

Press HDD.

● The HDD button lights on the recorder.

C ^{Choose a programme.}

Press PR +/– or the number keys to select the channel

you wish to record.

● When you switch channels on the HDD deck, the picture

appears a few seconds behind. It is not a malfunction.

D ^{Set the recording speed.}

Press MODE (p).

● For details on the recording speed, see page 23.

E ^{Start recording.}

Press and hold 7 and press 4 on the remote control, or

press 7 on the recorder.

● The HDD recording indicator lights on the recorder.

F ^{Stop recording.}

Press 8.

● The HDD recording indicator turns off.

● There may be a few seconds’ delay in resuming normal screen.

It is not a malfunction.

NOTES:

● It is not possible to record a TV programme on both the HDD

deck and the VHS deck simultaneously. In addition, it is not

possible to record simultaneously from the same external

input.

● It is not possible to pause recording on the HDD deck while

recording from the channels other than “L-1”, “F-1”, “DUB”.

(੬ pg. 59, 63)

● While recording a programme, you can play back the

previously recorded part by “Live Memory Playback”

(੬ pg. 26).

Download from Www.Somanuals.com. All Manuals Search And Download.

A ^{Turn on the recorder.}

● The button corresponding to the previously selected deck

lights on the recorder.

Basic Playback

Press 1.

● Turn on the TV and select the AV mode.

● If the recorder is turned on with HDD deck selected,

there may be about 30 seconds’ delay in starting to

show pictures on the screen.

B ^{Select the HDD deck.}

Press HDD.

● The HDD button lights on the recorder.

C ^{Start playback.}

Press 4.

● The HDD playback indicator lights on the recorder.

One of the following screens will appear:

– the programme which has been recorded on the HDD deck at

last time and has not been played back yet

– the programme which has been stopped during playback

– the HDD Navigation screen (੬ pg. 24)

● There are some programmes for demonstration on the HDD

deck when it is shipped from the factory.

D ^{Pause playback.}

Press 9.

● To resume normal playback, press 4.

E ^{Stop playback.}

Press 8.

● The HDD playback indicator turns off.

NOTE:

While recording a programme, you can play back the previously

recorded part by “Live Memory Playback” (੬ pg. 26).

Recording Speed on the HDD deck

This recorder has a 40 Gbyte hard disk drive. The pictures and

sounds recorded on the HDD deck and other information are

written down on the hard disk drive.

As recording format for the HDD deck, MPEG2 format, the same

for DVD, is used. As a guide for picture quality, the “bps” unit is

used to represent how much data can be recorded per second.

The larger this value, the better the picture quality is but the

more capacity is required for recording. Select SP for

programmes where quick movement occurs, such as sports

programmes, and SEP for talk shows, etc. where relativity less

movement.

The recording speeds of the recorder are set as follows:

Recording

speed

Recording amount

(approx.)

Maximum recording

time (approx.)

6.4 Mbps

4.5 Mbps

3.2 Mbps

2.2 Mbps

14 hours

20 hours

28 hours

40 hours

SEP

Download from Www.Somanuals.com. All Manuals Search And Download.

RECORDING/PLAYBACK ON HDD DECK (cont.)

The HDD Navigation enables you to seach and select the

desired programmes recorded on the HDD deck very easily.

There is a 40 Gbyte hard disk drive on this recorder. You can

record up to 60 programmes for the HDD deck.

Each time a programme is recorded on the HDD deck, the

information of the programme are registered for the HDD

Navigation automatically.

So, you can confirm the information of the programmes

recorded on the HDD with the HDD Navigation screen. And,

you can also select one of the programmes recorded on the

HDD deck using the HDD Navigation.

Playback with HDD

Navigation

The following screen appears as the HDD Navigation screen when you press NAVIGATION with the HDD deck

selected. You can move the arrow to select the desired position on the screen by pressing w r e t on the remote

control (or Y R U T on the recorder).

A Names of functions

HDD NAVIGATION

INDEX (੬ pg. 25)

INDEX

EASY DUBBING

EDITING

EASY DUBBING (੬ pg. 56)

EDITING (੬ pg. 60)

3 / 6

TOTAL TIME 0H00M REMAIN TIME 11H07M (SP)

B Total time for the selected programme(s)

C Index

(Small still picture of the each programme)

D Recording information for the programme indicated by

the arrow

11/06/01 MON 11/06/01 MON

[UNDECIDED]

SP 145min

12/06/01 TUE

12/06/01 TUE 10:30 – 12:55 PR.

E Operational commands

PLAY

MODIFY

DELETE

CANCEL

F Guidance for operations

INDEX NAVIGATION

G Remaining time

SELECT WITH

THEN PRESS [OK]

SELECT OK EXIT

(Based on the recording speed currently selected)

H Current/Total number of programme(s)

(For example, there are 6 recorded programmes and the

programme indicated by the arrow is the 3rd one.)

I This mark appears when there are over 4 registered

programmes.

(By pressing w e (or Y U), you can select the other

programme.)

J Icons

(Indicate the recording situation for each programme.)

The Icons and their meanings

You cannot dub this programme from the

HDD deck to the VHS deck.

This programme was recorded with daily

mode of timer recording.

This programme was recorded with weekly

mode of timer recording.

This programme has stereo sounds.

This programme has bilingual sounds.

This programme was recorded with timer

recording.

Download from Www.Somanuals.com. All Manuals Search And Download.

Scan for Beginning(s) of Programme(s)

C ^{Access the Index screen.}

HDD NAVIGATION

INDEX

A Press NAVIGATION. The

HDD Navigation screen

appears.

EASY DUBBING

EDITING

● Turn on the TV and select the AV mode.

● If the recorder is turned on with HDD deck selected,

there may be about 30 seconds’ delay in starting to

show pictures on the screen.

3 / 6

TOTAL TIME 0H00M REMAIN TIME 11H07M (SP)

B Confirm that “INDEX”

screen appears. Then,

press t or OK.

12/06/01 TUE 12/06/01 TUE 12/06/01 TUE 12/06/01 TUE

[UNDECIDED]

12/06/01 TUE 10:30 – 12:55 PR.

145min

PLAY MODIFY DELETE

CANCEL

INDEX NAVIGATION

SELECT WITH

THEN PRESS [OK]

SELECT OK EXIT

D ^{Select the programme(s).}

Press w e to move the arrow on the index (small still

pictures) of the desired programme.

HDD NAVIGATION

● When you want the plural

INDEX

EASY DUBBING

EDITING

programmes to be played back

continuously, press MEMO

after selecting the desired

programme. The numbers of

the playback order appear on

the index. You can select up to

8 programmes.

3 / 6

TOTAL TIME 0H00M REMAIN TIME 11H07M (SP)

12/06/01 TUE 12/06/01 TUE 12/06/01 TUE 12/06/01 TUE

[UNDECIDED]

12/06/01 TUE 10:30 – 12:55 PR.

145min

PLAY MODIFY DELETE

CANCEL

INDEX NAVIGATION

SELECT WITH

THEN PRESS [OK]

SELECT OK EXIT

● When you want to correct the

order, move the arrow on the desired index and press MEMO.

The number disappears and the recorder re-numbers the other

programmes automatically.

● When you want to cancel the order, move the arrow to

“CANCEL“ and press OK.

E ^{Start playback.}

Press OK to move the arrow to “PLAY” on the Index

screen, then press OK again. Or simply press 4. The

playback starts.

You can scan the beginning of the programme easily with the

HDD Navigation.

F ^{Pause playback.}

A ^{Turn on the recorder.}

Press 9.

Press 1.

● To resume normal playback, press 4.

B ^{Select the HDD deck.}

G ^{Stop playback.}

Press HDD.

Press 8.

Download from Www.Somanuals.com. All Manuals Search And Download.

RECORDING/PLAYBACK ON HDD DECK (cont.)

● Turn on the TV and select the AV mode.

● If the recorder is turned on with HDD deck selected,

there may be about 30 seconds’ delay in starting to

show pictures on the screen.

Live Memory

Playback

A ^{Turn on the recorder.}

Equipped with a hard disk drive, this recorder allows

Press 1.

information to be written to and read from the hard disk at high

speeds. Taking advantage of this feature, you can temporarily

record programmes received with the tuner or from an externally

connected equipment, and can watch them only a few seconds

behind actual air time.

B ^{Select the HDD deck.}

Press HDD.

In this recorder, viewing a programme through HDD (not a

recorded programme) means you are always watching the

programme temporarily recorded on it.

This feature enables you to reverse the programme back to view

any previous part of it. This is called “Live Memory Playback”,

which was impossible until now.

C ^{Choose a programme.}

Press PR +/– or the number keys to select the channel

you wish to record.

● The temporary recording begins.

You can select the length of the time for temporary recording

from off, 30 minutes, 1 hour, and 3 hours (੬ pg. 75).

D ^{Start Live Memory Playback.}

About “Live Memory Playback”

Press w or 3 to search for the previous part of the

programme, then press 4.

With a certain amount of space (for 30 minutes, 1 hour and 3

hours) reserved on the hard disk, the recorder records broadcasts

being received or signals input from an externally connected

equipment.

E ^{Stop Live Memory Playback.}

Even while you are reversing the programme to review any

previous part, the recorder continues recording the same

programme or externally-input signals.

Press 8.

● The on-air screen resumes.

NOTE:

NOTES:

When the reserved amount of time (or space) runs out, the

recorder overwrites the previous recordings on the hard disk,

starting with the oldest one, repeatedly if necessary. After having

recorded a certain number of programmes, if you try to increase

the amount of your reserved time on HDD, you may not be

allowed to do so because of possible lack of available space,

and the recorder will inform you of this by displaying a message

on the screen.

● You can use various playback features during Live Memory

Playback. (੬ pg. 27)

● If you have started actual recording by pressing 7, pressing 8

in step E only resumes the on-air screen. To stop actual

recording, press 8 again.

About limitation on Live Memory Playback

The temporary recording for Live Memory is canceled in the

following cases, and will start all over again when it is to

resume.

● When channels are changed

● When the power is turned off

● When the thumbnails are changed

● When the setting for Live Memory playback is changed

● When recording is started via the HDD deck or the VHS

deck

● When a recorded programme is played back or deleted

Download from Www.Somanuals.com. All Manuals Search And Download.

High-Speed Search

Playback Features

● Turn on the TV and select the AV mode.

● If the recorder is turned on with HDD deck selected,

there may be about 30 seconds’ delay in starting to

show pictures on the screen.

During playback (or Live Memory Playback), press 5

for forward high-speed search, or 3 for reverse

high-speed search.

● To resume normal playback, press 4.

NOTES:

● For short searches, press and hold 5 or 3 for over 2

seconds during playback or still picture. When released,

normal playback resumes.

● If either end of the programme is reached during high-speed

search, normal playback will resume.

Still Picture/Frame-By-Frame

Playback

1 Pause during playback.

Press 9.

2 Activate frame-by-frame playback.

Press 9 or e repeatedly to advance one frame at a time.

Press w repeatedly to reverse one frame at a time.

● To resume normal playback, press 4.

Slow Motion

1 Pause during playback.

Press 9.

2 Activate slow motion playback.

Press and hold e or w for over 2 seconds.

● The playback speed changes for each direction by pressing e

or w repeatedly.

● To resume normal playback, press 4.

Download from Www.Somanuals.com. All Manuals Search And Download.

RECORDING/PLAYBACK ON HDD DECK (cont.)

Quick Rewind a little

During playback (or Live Memory Playback), press

(START –). The recorder rewinds the picture a little

(about 7 seconds) and resumes playback.

● If the button is pressed repeatedly, the recorder rewinds the

pictures continuously and resumes playback.

Quick Skip Forward

During playback (or Live Memory Playback), press

(START +). The recorder skips forward (about 30

seconds at a time) and resumes playback.

● If the button is pressed repeatedly, the recorder skips

continuously and resumes playback.

Repeat Playback

Your recorder can automatically play back the whole programme

100 times repeatedly.

During playback, press 4 and hold for over 5 seconds,

then release.

● The Play indicator ( u) on the front display panel and the

HDD playback indicator blink slowly.

● To resume normal playback, press 4.

NOTE:

Repeat playback is not possible during Live Memory Playback.

Soundtrack Selection

The HDD deck can record 2 soundtracks (L and R).

During Playback

Pressing AUDIO changes the soundtrack as follows:

TRACK

USE

On-Screen

Display

Variable Speed Search

During playback (or Live Memory Playback), press e for

forward variable-speed search, or w for reverse

variable-speed search.

For stereo programme

For monaural programme

● The playback speed changes for each direction by pressing e

or w repeatedly. Refer to the illustration below.

● To resume normal playback, press 4.

For main audio of bilingual programme

For sub audio of bilingual programme

NICAM

For NICAM stereo programme

For NICAM monaural programme

For NICAM main audio of bilingual

programme

N .

For NICAM sub audio of bilingual

programme

N .

NICAM

For NICAM FM programme

For AUX input sounds (L+R)

For AUX input sound (L)

For AUX input sound (R)

Download from Www.Somanuals.com. All Manuals Search And Download.

Receiving Stereo and Bilingual

Programmes

Recording Features

Your recorder is equipped with a Sound-Multiplex decoder (A2)

and a Digital stereo sound decoder (NICAM) making reception

of stereo and bilingual broadcasts possible.

When the channel is changed, the type of broadcast being

received will be displayed on the TV screen for a few seconds.

Type of Broadcast Being

On-screen Display

Received

A2 Stereo

A2 Bilingual

Regular Monaural

NICAM Stereo

NICAM Bilingual

NICAM Monaural

NICAM FM Sound

NICAM

NI.

NICAM

Record One Programme While

Watching Another

NOTE:

“O.S.D.” must be set to “ON” or the on-screen displays will not

appear (੬ pg. 78).

Once recording is in progress, all you need to do is to set

the channel controls on the TV for the station you wish to

view.

To Record Stereo and Bilingual Programmes (A2)

Stereo programmes are automatically recorded in stereo.

● The programme selected with the TV’s channel controls

appears on the TV screen, while the one selected with the

recorder’s PR buttons is recorded on the tape.

● If a decoder is connected to the recorder (੬ pg. 72), you can

select a scrambled channel as well with the TV channel

controls.

● Bilingual programmes are automatically recorded in bilingual.

To Record NICAM Bilingual Programmes

Set “AUDIO REC” to “NICAM” to record the NICAM bilingual

programme (੬ pg. 75).

NOTES:

Instant Timer Recording (ITR)

● If the quality of stereo sound being received is poor, the

broadcast will be received in monaural with better quality.

● Before playing back a programme recorded in stereo, or a

bilingual programme, refer to “Soundtrack Selection” on

page 28.

This easy method lets you record for from 30 minutes to 6 hours

(selectable in 30-min. increments), and shuts the recorder off

after recording is finished.

1 Start recording.

Press 7 on the recorder.

2 Engage the ITR mode.

Press 7 again. “o” blinks and “0:30” appears on the front

display panel.

3 Set the recording duration.

If you want to record for more than 30 minutes, press 7

to extend the time. Each press extends recording time by

30 minutes.

NOTE:

You can only perform ITR using the 7 button on the recorder’s

front panel.

Download from Www.Somanuals.com. All Manuals Search And Download.

RECORDING/PLAYBACK ON VHS DECK

A ^{Load a cassette.}

Basic Recording

Insert a cassette with the record safety tab intact.

Make sure the window side is up, the rear label side is

facing you and the arrow on the front of the cassette is

pointed toward the recorder.

● Turn on the TV and select the AV mode.

● If the recorder is turned on with HDD deck selected,

there may be about 30 seconds’ delay in starting to

show pictures on the screen.

● Do not apply too much pressure when inserting.

● The recorder’s power comes on automatically.

● While “– – – –“ is blinking on the front display panel, the tape

will run for a few seconds to search for the tape number.

● If you want to use VCR Navigation to select the programme

after recording with this recorder, set “NAVIGATION” to “ON”

(੬ pg. 75).

B ^{Select the VHS deck.}

Press S-VHS.

● The S-VHS button lights on the recorder.

C ^{Choose a programme.}

Press PR +/– or the number keys to select the channel

you wish to record.

D ^{Set the tape speed.}

Press MODE (p). Check the SP/LP/EP indicator on the

recorder’s front display panel to confirm the selected tape

speed.

● In EP mode, the recording time is extended three times.

● If you record a programme in EP mode on this recorder, it is

recommended to play back the EP-recorded tape on this

recorder.

● It is not possible to select EP mode if “COLOUR SYSTEM” is

set to “MESECAM”. (੬ pg. 76)

E ^{Start recording.}

Press and hold 7 and press 4 on the remote control, or

press 7 on the recorder.

● The VHS recording indicator lights on the recorder.

B.E.S.T. takes place at the beginning of both the first SP and

the first LP (or EP) recording after inserting the cassette.

(੬ pg. 41)

If “DIRECT REC” is set to “ON”, the programme that appears

on the TV screen will be recorded (੬ pg. 78).

NOTE:

It is not possible to record a TV programme on both the HDD

deck and the VHS deck simultaneously. In addition, it is not

possible to record simultaneously from the same external input.

F ^{Pause/Resume recording.}

Press 9. Press 4 to resume recording.

G ^{Stop recording.}

Press 8. Then press

to remove the cassette.

Download from Www.Somanuals.com. All Manuals Search And Download.

A ^{Load a cassette.}

Basic Playback

Make sure the window side is up, the rear label side is

facing you and the arrow on the front of the cassette is

pointed toward the recorder.

● Turn on the TV and select the AV mode.

● If the recorder is turned on with HDD deck selected,

there may be about 30 seconds’ delay in starting to

show pictures on the screen.

● Do not apply too much pressure when inserting.

● The recorder’s power comes on automatically.

● While “– – – –“ is blinking on the front display panel, the tape

will run for a few seconds to search for the tape number.

● If the record safety tab has been removed, playback begins

automatically.

B ^{Select the VHS deck.}

Press S-VHS.

● The S-VHS button lights on the recorder.

C ^{Find the programme start point.}

If the tape is advanced past the start point, press 3. To

go forward, press 5.

D ^{Start playback.}

Press 4. “BEST” appears blinking in the recorder’s front

display panel during automatic tracking. (੬ pg. 41)

● The VHS playback indicator lights on the recorder.

E ^{Stop playback.}

Press 8. Then press

to remove the cassette.

Usable cassettes

● Compact VHS camcorder recordings

can be played on this video recorder.

Simply place the recorded cassette

into a VHS Cassette Adapter and it

can be used just like any full-sized

VHS cassette.

● This video recorder can record on

regular VHS and Super VHS cassettes. While only VHS

signals can be recorded on regular VHS cassettes*, both

VHS and Super VHS signals can be recorded and played

back using Super VHS cassettes.

* By using the S-VHS ET function, it is possible to record and

play back with S-VHS picture quality on VHS cassettes with

this recorder.

Download from Www.Somanuals.com. All Manuals Search And Download.

RECORDING/PLAYBACK ON VHS DECK (cont.)

The VCR Navigation enables you to seach and select the desired

programmes recorded on the VHS deck very easily.

When you record a programme with the VHS deck for more than

8 minutes in SP mode (for more than 15 minutes in LP mode or

for more than 23 minutes in EP mode) with “NAVIGATION” set

to “ON” (੬ pg. 75), its information are registered for the VCR

Navigation automatically.

When the first programme is recorded on a cassette, the VCR

Navigation gives the register number to the cassette. The VCR

Navigation memorizes the cassette by the number. You can

confirm the register number of the cassette when the cassette is

loaded or ejected.

Playback with VCR

Navigation

The VCR Navigation can register up to 2000 programmes or up

to 680 cassettes.

The following screen appears as the VCR Navigation screen when you press NAVIGATION with the VHS deck selected.

You can move the arrow to select the desired position on the screen by pressing w r e t on the remote control (or Y

R U T on the recorder).

A Loaded cassette number

B Date when the loaded cassette registered

C Index

(Small still picture of the each programme)

D Operational commands

E 3 ways to navigate

VCR NAVIGATION

0001

DATE

CATEGORY

CASSETTE #

[12/06/01 TUE ] 120M

BLANK 87M (SP)

BLANK

(By the recording date, category and cassette number)

F Total time and blank time of the loaded cassette

(Based on the recording speed currently selected)

G Recording information for the programme indicated by

the arrow

87min(SP)

12/06/01 TUE

[UNDECIDED]

30min

DELETE

12/06/01 TUE 12:00 – 12:30 PR.

PLAY STOP

MODIFY

INDEX NAVIGATION

SELECT WITH

THEN PRESS [OK]

H Icons

SELECT OK EXIT

(Indicate the recording situation for each programme.)

I Guidance for operations

The Icons and their meanings

This programme has a little gap at the

beginning.

This programme has stereo sounds.

This programme has bilingual sounds.

This programme was recorded with Timer

recording.

Download from Www.Somanuals.com. All Manuals Search And Download.

Scan for Beginning of Programme with

VCR Navigation

C ^{Access the VCR Navigation screen.}

[12/06/01 TUE ] 120M

VCR NAVIGATION

Press NAVIGATION. The

VCR Navigation screen

appears.

0001

DATE

CATEGORY

CASSETTE #

BLANK 87M (SP)

The VCR Navigation can take effect for the programme

which has been recorded, and whose information has

been registered with this recorder. Once the VHS (S-VHS)

cassettes have been used for recording with this recorder,

they have the register number given by this recorder.

BLANK

87min(SP)

● If a registered cassette has

been loaded, the contents of

the loaded cassette will

appear. To select the

programme from the loaded

cassette, go to step F.

12/06/01 TUE

[UNDECIDED]

30min

DELETE

12/06/01 TUE 12:00 – 12:30 PR.

PLAY STOP MODIFY

INDEX NAVIGATION

SELECT WITH

THEN PRESS [OK]

SELECT OK EXIT

● Turn on the TV and select the AV mode.

● If the recorder is turned on with HDD deck selected,

there may be about 30 seconds’ delay in starting to

show pictures on the screen.

D ^{Search for the programme.}

Press w e to move the arrow to select one of the 3 search

types, then press OK or t.

A Select “DATE” if you want to search for the registered

programme by the recording date.

B Select “CATEGORY” if you want to search for the registered

programme by the category in which you have classified the

programme.

C Select “CASSETTE #” if you want to search for the programme

by each registered cassette.

E ^{Load the cassette.}

After you have found the programme and checked its

cassette number, insert the cassette.

F ^{Select the programme.}

Press w e to move the arrow on the index (small still

pictures) of the desired programme.

G ^{Start playback.}

Press OK to move the arrow to “PLAY” on the Index

screen, then press OK again. Or simply press 4. The

playback starts.

A ^{Turn on the recorder.}

H ^{Pause playback.}

Press 1.

Press 9.

● To resume normal playback, press 4.

B ^{Select the VHS deck.}

I ^{Stop playback.}

Press S-VHS.

Press 8.

Download from Www.Somanuals.com. All Manuals Search And Download.

RECORDING/PLAYBACK ON VHS DECK (cont.)

Still Picture/Frame-By-Frame

Playback

Playback Features

1 Pause during playback.

Press 9.

2 Activate frame-by-frame playback.

Press 9 repeatedly to advance one frame at a time.

Press 9 for over 2 seconds to start frame-by-frame

playback.

● To resume normal playback, press 4.

Slow Motion

1 Pause during playback.

Press 9.

ATTENTION

2 Activate slow motion playback.

● Picture may not appear during high-speed search with an

LP/EP-recorded tape.

Press and hold e or w for over 2 seconds.

● The playback speed changes for each direction by pressing e

or w repeatedly.

● Noise may appear or the picture may appear distorted with

an EP-recorded tape during still, slow motion,

frame-by-frame playback or variable speed search.

● In the high-speed search, still, slow motion or

frame-by-frame playback mode, the picture will be

distorted, and there will be a loss of colour.

● When normal playback resumes from search, still, slow

motion or frame-by-frame playback, the picture may jitter

vertically momentarily depending on the type of TV being

used.

● To resume normal playback, press 4.

Variable Speed Search

During playback, press e for forward variable-speed

search, or w for reverse variable-speed search.

● The playback speed changes for each direction by pressing e

or w repeatedly. Refer to the illustration below.

● To resume normal playback, press 4.

Clean the video heads using a dry cleaning

cassette — TCL-2UX — when:

● Rough, poor picture appears while a tape is played back.

● The picture is unclear or no picture appears.

● “USE CLEANING CASSETTE” appears on the screen (only

with “O.S.D.” set to “ON” (੬ pg. 78)).

High-Speed Search

During playback or still, press 5 for forward

high-speed search, or 3 for reverse high-speed search.

● To resume normal playback, press 4.

NOTE:

For short searches, press and hold 5 or 3 for over 2

seconds during playback or still picture. When released, normal

playback resumes.

Download from Www.Somanuals.com. All Manuals Search And Download.

Index Search

Your recorder automatically marks

index codes at the beginning of

each recording. This function gives

you quick access to any one of 9

index codes in either direction.

NOTE:

Before starting, make sure the

recorder is in the Stop mode.

Activate Index Search.

Press w or e (2 or 6). “2 1” or “6 1” is

displayed on the TV screen and search begins in the

corresponding direction.

● To access index codes 2 through 9, press w or e repeatedly

until the correct index number is displayed.

Example:

To locate the beginning of B from the current position, press w

twice.

To locate the beginning of D from the current position, press e

once.

Repeat Playback

Current position

Your recorder can automatically play back the whole tape 100

times repeatedly.

1 Start playback.

Press 4.

2 Activate Repeat Playback.

Index number

Press 4 and hold for over 5 seconds, then release.

● The Play indicator ( u) on the front display panel and the VHS

play indicator blink slowly.

● When the specified index code is located, playback begins

automatically.

● After playing back a tape 100 times, the recorder stops

automatically.

Next Function Memory

3 Stop Repeat Playback.

The Next Function Memory “tells” the recorder what to do after

rewinding. Before continuing, make sure the recorder is in the

Stop mode.

Press 8 at any time.

● Pressing 4, 3, 5 or 9 also stops Repeat Playback.

NOTE:

a- For Automatic Start Of Playback

Repeat playback is not possible with a cassette recorded in EP

mode.

Press 3, then press 4 within 2 seconds.

b- For Automatic Cassette Ejection After Tape Rewind

Press 3, then press

within 2 seconds.

Download from Www.Somanuals.com. All Manuals Search And Download.

RECORDING/PLAYBACK ON VHS DECK (cont.)

Soundtrack Selection

Your recorder is capable of recording three soundtracks (HI-FI L,

HI-FI R and NORM) and will play back the one you select.

During Playback

Pressing AUDIO changes the soundtrack as follows:

TRACK

USE

On-Screen

Display

HI FI

L j h R

For Hi-Fi stereo tapes

HI FI

L j

For main audio of Bilingual tapes

HI FI

For sub audio of Bilingual tapes

h R

NORM

For audio-dubbed tapes

HI FI

NORM

NOTES:

● “HIFI L j h R” should normally be selected. In this mode,

Hi-Fi stereo tapes are played back in stereo, and the normal

audio track is played back automatically for tapes with only

normal audio.

● For instructions on recording stereo and bilingual

programmes, refer to page 40.

● “O.S.D.” must be set to “ON” or the on-screen displays will

not appear (੬ pg. 78).

Manual Tracking

Your recorder is equipped with automatic tracking control.

During playback, you can override this and adjust the tracking

manually by pressing the PR buttons.

1 Override automatic tracking.

Press p on the remote control.

2 Adjust the tracking manually.

Press PR + or –.

● Press p again to return to automatic tracking.

NOTE:

When a new tape is inserted, the recorder enters the automatic

tracking mode automatically.

Download from Www.Somanuals.com. All Manuals Search And Download.

Record One Programme While

Watching Another

Recording Features

Once recording is in progress, all you need to do is to set

the channel controls on the TV for the station you wish to

view.

● The programme selected with the TV’s channel controls

appears on the TV screen, while the one selected with the

recorder’s PR buttons is recorded on the tape.

● If a decoder is connected to the recorder (੬ pg. 72), you can

select a scrambled channel as well with the TV channel

controls.

Instant Timer Recording (ITR)

This easy method lets you record for from 30 minutes to 6 hours

(selectable in 30-min. increments), and shuts the recorder off

after recording is finished.

Recording Resume Function

If there is a power outage during recording, Instant Timer

Recording (in the right column) or timer recording

(੬ pg. 42, 44), the recording will resume automatically

when power is restored to the recorder unless the recorder’s

memory backup has expired.

1 Start recording.

Press 7 on the recorder.

2 Engage the ITR mode.

Press 7 again. “o” blinks and “0:30” appears on the front

display panel.

Accidental erasure prevention

To prevent accidental recording on a

recorded cassette, remove its safety

tab. To record on it later, cover the

hole with adhesive tape.

3 Set the recording duration.

If you want to record for more than 30 minutes, press 7

to extend the time. Each press extends recording time by

30 minutes.

Record safety tab

NOTE:

You can only perform ITR using the 7 button on the recorder’s

front panel.

Download from Www.Somanuals.com. All Manuals Search And Download.

RECORDING/PLAYBACK ON VHS DECK (cont.)

Retake

You can cut out unnecessary parts of a TV programme while you

are recording it.

End of programme

Beginning of programme

Unnecessary Unnecessary

Programme

part

Recorded part

Go back to end of programme to cut out

unnecessary part

1 Engage the Record-Pause mode.

Press 9 during recording.

2 Locate the start point.

Hold down 3 or 5 and release it when you reach

the point where you want to resume recording.

● Your recorder returns to the Record-Pause mode.

3 Resume recording.

Press 4 when you wish to resume recording.

NOTES:

Elapsed Recording Time Indication

● Retake function does not work during Direct Rec (੬ pg. 21,

78).

1 Set the counter display.

● Noise may appear when Retake function is used at the part

that is recorded in EP mode.

Press – –:– – until a counter reading appears on the front

display panel.

2 Reset the counter.

Press 0000 before starting recording or playback.

● The counter is reset to “0:00:00” and shows the exact elapsed

time as the tape runs. You can check the exact time of a

recording or playback.

Tape Remaining Time

Press – –:– – until the time remaining on the tape

appears.

● The front display panel shows the tape remaining time with

“y” displayed.

● By pressing the – –:– – button, you can change the display to

show the counter reading, channel position*, clock time or

tape remaining time.

* Channel position is not displayed during playback.

NOTE:

Depending on the type of tape being used, the tape remaining

time reading may not appear right away, or is not correct.

“– –:– –” may sometimes appear, or the display may blink on

occasion.

Download from Www.Somanuals.com. All Manuals Search And Download.

Super VHS ET (S-VHS ET)

— Recording on VHS cassettes with

S-VHS quality

You can record in SP mode on VHS cassettes with S-VHS picture

quality. Tapes recorded using this function can be played back

on a recorder equipped with the S-VHS ET function.

● You can activate the S-VHS ET function only before you start

recording on a VHS cassette.

● Before recording, make sure that “B.E.S.T.” is set to “ON”.

(੬ pg. 77)

Engage the S-VHS ET mode.

Press S-VHS ET on the recorder.

● “S-VHS ET : ON“ appears on the TV screen, if “O.S.D.“ is set

to “ON“.

● To disengage the S-VHS ET mode, press S-VHS ET.

NOTES:

● You cannot activate the S-VHS ET function ...

... while recording is in progress.

... while timer-recording or Instant Timer Recording

(੬ pg. 37) is in progress.

... while B.E.S.T. (੬ pg. 41) is in progress.

● The S-VHS ET function does not work ...

... with S-VHS cassettes.

... with recordings in LP/EP mode.

● To keep the highest quality recording and playback pictures

over a long period of time, S-VHS recording on S-VHS

cassettes is recommended.

● Use of high grade tapes is recommended for S-VHS ET

recordings. On some tapes, picture quality will not improve

even if the S-VHS ET function is used. Check the recording

quality before you start important recordings.

● You can play back a tape recorded using the S-VHS ET

function on most of S-VHS recorders and of VHS recorders

equipped with SQPB (S-VHS QUASI PLAYBACK) function.

(Notice some recorders are not compatible with the S-VHS ET

function.)

● While playing back a tape recorded using the S-VHS ET

function on some recorders, noise may appear. (If playback

picture becomes blurred or interrupted, use a cleaning

cassette.)

● In the high-speed search, still, slow-motion or frame-by-frame

playback modes (੬ pg. 34), noise may appear. If these modes

are performed frequently on a tape recorded using the S-VHS

ET function, the tape may be damaged and the picture may be

deteriorated.

Download from Www.Somanuals.com. All Manuals Search And Download.

RECORDING/PLAYBACK ON VHS DECK (cont.)

Receiving Stereo and Bilingual

Programmes

Your recorder is equipped with a Sound-Multiplex decoder (A2)

and a Digital stereo sound decoder (NICAM) making reception

of stereo and bilingual broadcasts possible.

When the channel is changed, the type of broadcast being

received will be displayed on the TV screen for a few seconds.

Type of Broadcast Being

On-screen Display

Received

A2 Stereo

A2 Bilingual

BIL.

Regular Monaural

NICAM Stereo

NICAM Bilingual

NICAM Monaural

(none)

ST NICAM

BIL. NICAM

NICAM

● To listen to a stereo programme, press AUDIO until

“HIFI L j h R” appears on the TV screen.

● To listen to a bilingual programme, press AUDIO until

“HIFI L j” or “HIFI h R” appears on the TV screen (as

required).

● To listen to the standard (Regular Monaural) audio while

receiving a NICAM broadcast, press AUDIO until “NORM”

appears on the TV screen.

NOTE:

“O.S.D.” must be set to “ON” or the on-screen displays will not

appear (੬ pg. 78).

To Record Stereo and Bilingual Programmes (A2)

Stereo programmes are automatically recorded in stereo on the

Hi-Fi audio track (with the normal audio track recording mixed L

and R channel sound).

● Bilingual programmes are automatically recorded in bilingual

on the Hi-Fi audio track. The main soundtrack will be

recorded on the normal audio track.

To Record NICAM Stereo and Bilingual

Programmes

The NICAM audio programme will be recorded on the Hi-Fi

audio track, and the standard audio programme will be recorded

on the normal audio track.

NOTES:

● If the quality of stereo sound being received is poor, the

broadcast will be received in monaural with better quality.

● Before playing back a programme recorded in stereo, or a

bilingual programme, refer to “Soundtrack Selection” on

page 36.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

B.E.S.T. Picture

System

The recorder assesses the quality of the tape once you

initiate recording.

DURING B.E.S.T.

The B.E.S.T. (Biconditional Equalised Signal Tracking)

system checks the condition of the tape in use during

playback and recording, and compensates to provide the

highest-possible playback and recording pictures. You

can set “B.E.S.T.” to “ON” or “OFF” to your preference

(੬ pg. 77).

B.E.S.T. COMPLETE

● The recorder spends approximately 7 seconds assessing the

condition of the tape, then begins recording.

Playback

NOTES:

The recorder assesses the quality of the tape once you

initiate playback.

● The B.E.S.T. system works for both SP and LP (or EP) modes

only after a tape has been inserted and the Record mode is first

initiated. It does not work during recording.

● The B.E.S.T. system does not work while Automatic Satellite

Programme Recording is in progress (੬ pg. 47).

● In the case of timer recordings, the B.E.S.T. system works

before recording is initiated.

● Once the cassette is ejected, the B.E.S.T. data is cancelled. The

next time the cassette is used for recording, B.E.S.T. is

re-performed.

● The recorder adjusts the playback picture quality based on the

quality of the tape in use.

● B.E.S.T. is active during automatic tracking. “BEST” appears

blinking on the recorder’s front display panel.

● Pressing the recorder’s 7 button while “BEST” is displayed

does not start Instant Timer Recording (੬ pg. 37).

NOTES:

● When watching a tape recorded with “B.E.S.T.” set to “ON”, it

is recommended that you leave B.E.S.T. on during playback as

well.

ATTENTION

Since the B.E.S.T. system works before recording actually

starts, there is a delay of approximately 7 seconds after 7

and 4 on the remote control are pressed, or 7 on the

recorder is pressed. To make sure you record the desired

scene or programme in its entirety, first perform the following

steps:

● When watching a rental tape or one recorded on another

video recorder, or when using this recorder as the player for

editing, set B.E.S.T. to your preference (੬ pg. 77).

● “BEST” only appears at the beginning of automatic tracking.

Even though it doesn’t appear after that, the B.E.S.T. function is

operative.

A Press and hold 9 and press 7 to engage the Record

Pause mode.

● The recorder then automatically checks the condition of

the tape and, after approximately 7 seconds, re-enters

Record Pause mode.

B Press 4 to start recording.

If you want to bypass the B.E.S.T. system and begin recording

immediately, set “B.E.S.T.” to “OFF” (੬ pg. 77).

Download from Www.Somanuals.com. All Manuals Search And Download.

TIMER RECORDING

SHOWVIEW^®Timer

A ^{Turn on the recorder.}

Press 1.

B ^{Select the deck.}

Programming

Press HDD or S-VHS.

● For the VHS deck:

You can programme this recorder to timer-record as many as 16

programmes.

Insert a cassette with the record safety tab intact.

With the SHOWVIEW system, timer programming is greatly

simplified because each TV programme has a corresponding

code number which your recorder is able to recognize.

You can use the remote control with LCD panel to enter the

SHOWVIEW number.

C ^{Access the SHOWVIEW display.}

Press LCD PROG.

The LCD panel looks like this:

Before performing the SHOWVIEW Timer

Programming:

● Make sure that the recorder’s built-in clock is set properly.

● Turn on the TV and select the AV mode.

D ^{Enter the SHOWVIEW number.}

Press the number keys to enter the SHOWVIEW number of

a programme you wish to record.

● If you make a mistake, press & and input the correct number.

The SHOWVIEW number you enter appears on the LCD panel:

LCD panel

E ^{Transfer the SHOWVIEW number.}

Press to transmit the SHOWVIEW number from the

remote control to the recorder.

● If the number you entered is invalid, “SHOWVIEW NO.

ERROR CONFIRM SHOWVIEW NO. THEN RETRY” appears

on the TV screen. Input a valid SHOWVIEW number.

● If “SET GUIDE PROG THEN RETRY” appears on the TV

screen, set Guide Program Numbers (੬ pg. 79) manually.

● When “PROGRAMME FULL DELETE UNWANTED TIMER

PROGRAMME” appears on the TV screen, you need to cancel

some of the reserved programmes. (੬ pg. 46)

F ^{Check the programme data.}

PROGRAMME

The SHOWVIEW number you

SHOWVIEW NO. 1 2 3 4 5 6 7 8

RECORD TO

entered and the matching

VPS/PDC

REC MODE

WEEKLY/DAILY

HDD

SEP

WEEKLY

timer-recording information

are displayed on the TV

screen. Check they are

correct.

● To cancel this setting, press w

e to move the arrow to

“CANCEL”, then press OK.

Or, press PROG.

TV PROG

5 CH

START

23:30

STOP

00:00

DATE

12/06/01 TUE

CONFIRM

CANCEL

CATEGORY

UNDECIDED

–

CHANGE SETTINGS BY REMOTE

THEN CONFIRM

PROG.

EXIT

–

START STOP DATE

IMPORTANT

Make sure the channel position number you wish to record is

displayed; if not, see “SHOWVIEW^®System Setup” on page 79

and set the Guide Program number correctly.

Download from Www.Somanuals.com. All Manuals Search And Download.

NOTES:

G ^{Set the recording speed.}

● For the VHS deck:

It is not possible to select EP mode if “COLOUR SYSTEM” is

set to “MESECAM”. (੬ pg. 76)

● To Change The Stop Time . . .

. . . press STOP +/– in step F. You can compensate for

anticipated programme schedule delays.

● To Timer-Record Weekly Or Daily Serials . . .

Press MODE (p).

. . . in step F, press WEEKLY (number key “9”) for weekly

serials or DAILY (number key “8”) for daily serials (Monday —

Friday). Either “WEEKLY” or “DAILY” appears on the TV

screen. Pressing the button again makes the corresponding

indication disappear.

H ^{Set the VPS/PDC mode.}

● During timer recording . . .

Press VPS/PDC to select “ON” or “OFF”.

● If “VPS/PDC ON” is displayed on the TV screen, VPS/PDC is

set to ON.

. . .it is not possible to disengage the timer mode.

. . .it is not possible to change the recording deck (HDD or

VHS).

● If “VPS/PDC OFF” is displayed on the TV screen, VPS/PDC is

set to OFF.

੬ “VPS/PDC Recording” on page 45.

● It is not possible to timer-record a TV programme with a

SHOWVIEW number which starts with “0”.

Satellite Receiver Users

To timer-record a satellite broadcast using the SHOWVIEW

system:

I ^{Set the category.}

PROGRAMME

A Perform “Automatic Satellite Programme Recording” on

page 47.

A Press w e to move the

CHILDREN

EDUCATIONS

RELIGIOUS

SPECIAL

CLASSICS

MOVIES

SERIES

COMEDY

MUSIC

DRAMA

NEWS

arrow to “CATEGORY“,

then press OK. The

category set screen

appears.

B Perform steps A – K. In step F, the front display panel

shows “L2” for the channel position. In step H, you

cannot set “VPS/PDC” to “ON”.

SHOPPING

OTHERS

SHOW

SPORTS

UNDECIDED

C Leave the satellite receiver’s power on.

RETURN

B Press w r e t to select

the desired category, then

press OK.

INDEX

SELECT WITH

THEN PRESS [OK]

SELECT OK

C Confirm the arrow is on

“RETURN”, then press

OK. The programme

screen resumes.

J ^{Return to the normal screen.}

Press w r e t to move the arrow to “CONFIRM”, then

press OK. “PROGRAMME COMPLETED” appears on the

TV screen for about 5 seconds, then the normal screen

appears.

● If “PROGRAMME OVERLAPPED” appears on the TV screen,

see page 46.

K ^{Engage the recorder’s timer mode.}

Press # (TIMER). The recorder turns off automatically and

“#” appears on the front display panel.

● To disengage the timer mode, press # (TIMER) again.

Download from Www.Somanuals.com. All Manuals Search And Download.

TIMER RECORDING (cont.)

A ^{Turn on the recorder.}

Express Timer

Programming

Press 1.

B ^{Select the deck.}

Press HDD or S-VHS.

You can programme this recorder to timer-record as many as 16

programmes.

● For the VHS deck:

Insert a cassette with the record safety tab intact.

If you do not know the SHOWVIEW number for the programme

you wish to record, use the following procedure to set your

recorder to timer-record the programme.

C ^{Access the programme screen.}

PROGRAMME

Press PROG.

Before performing Express Timer Programming:

● Make sure that the recorder’s built-in clock is set properly.

● Turn on the TV and select the AV mode.

● When “PROGRAMME FULL

VPS/PDC

RECORD TO

HDD

REC MODE

SEP

WEEKLY/DAILY

DATE

DELETE UNWANTED TIMER

PROGRAMME” appears on

the TV screen, you need to

cancel some of the reserved

programmes. (੬ pg. 46)

TV PROG

START

STOP

– – : – –

– –/– –/– – – – –

– –

CONFIRM

CANCEL

CATEGORY

UNDECIDED

CHANGE SETTINGS BY REMOTE

THEN CONFIRM

PROG.

EXIT

–

START STOP DATE

D ^{Enter the programme start time.}

Press START+/– to enter the time you want recording to

start.

● Press and hold START+/– to move in 30-minute increments, or

press and release repeatedly to move 1 minute at a time.

E ^{Enter the programme stop time.}

Press STOP+/– to enter the time you want recording to

stop.

● Press and hold STOP+/– to move in 30-minute increments, or

press and release repeatedly to move 1 minute at a time.

F ^{Enter the programme date.}

Press DATE+/–.

● The current date appears on the TV screen. The date you enter

appears in its place.

G ^{Enter the channel position.}

Press PR+/–.

H ^{Set the tape speed.}

Press MODE (p).

● For the VHS deck:

It is not possible to select EP mode if “COLOUR SYSTEM” is

set to “MESECAM”. (੬ pg. 76)

Download from Www.Somanuals.com. All Manuals Search And Download.

Satellite Receiver Users

I ^{Set the VPS/PDC mode.}

To timer-record a satellite broadcast using Express Timer

Programming:

Press VPS/PDC to select “ON” or “OFF”.

● If “VPS/PDC ON” is displayed on the TV screen, VPS/PDC is

set to ON.

A Perform “Automatic Satellite Programme Recording” on

page 47.

B Perform steps A – L. In step G, press the number key “0”

to change “TV PROG” to “SAT”. The front display panel

shows “L2” for the channel position. Then press PR+/– to

enter the channel position for the satellite broadcast. In

step I, you cannot set “VPS/PDC” to “ON”.

C Leave the satellite receiver’s power on.

● If “VPS/PDC OFF” is displayed on the TV screen, VPS/PDC is

set to OFF.

੬ “VPS/PDC Recording” in the right column

J ^{Set the category.}

PROGRAMME

A Press w e to move the

CHILDREN

EDUCATIONS

RELIGIOUS

SPECIAL

CLASSICS

MOVIES

SERIES

COMEDY

MUSIC

DRAMA

NEWS

arrow to “CATEGORY”,

then press OK. The

category set screen

appears.

VPS/PDC Recording

SHOPPING

OTHERS

SHOW

SPORTS

UNDECIDED

Now available from some TV stations, PDC (Programme

Delivery Control) and VPS (Video Programme System) are

service designed to assure safe, accurate timer recording.

With this system, special code signals are transmitted

together with the audio/video signals. These code signals

control your video recorder and have precedence over the

advertised times you may have preset into the timer. This

means that your recorder will start and stop recording when

the preset TV programmes actually start and end — even if

the broadcast time of a preset TV programme is changed.

RETURN

B Press w r e t to select

the desired category, then

press OK.

INDEX

SELECT WITH

THEN PRESS [OK]

SELECT OK

C Confirm the arrow is on

“RETURN”, then press

OK. The programme

screen resumes.

NOTES:

K ^{Return to the normal screen.}

● When you use Express Timer Programming, set the start

time (VPS or PDC time) exactly as advertised in the TV

listing. A different time than advertised will result in no

recording.

Press w r e t to move the arrow to “CONFIRM”, then

press OK. “PROGRAMME COMPLETED” appears on the

TV screen for about 5 seconds, then the normal screen

appears.

● VPS/PDC recording is also possible when a satellite

receiver or a cable system is connected to AV2 (L-2) IN/

DECODER connector on your recorder.

● VPS/PDC recording is also possible via the AV1 (L-1) IN/

OUT connector.

● If “PROGRAMME OVERLAPPED” appears on the TV screen,

see page 46.

L ^{Engage the recorder’s timer mode.}

How to check if the station being received transmits a

VPS/PDC signal (VHS deck only)

A Press – –:– – until the channel position appears on the

front display panel.

Press # (TIMER). The recorder turns off automatically and

“#” appears on the front display panel.

● To disengage the timer mode, press # (TIMER) again.

B Hold down START+ for about 5 seconds.

“VPS/PDC” appears blinking on the front display panel.

If a VPS/PDC signal is detected from the station,

“VPS/PDC” will stop blinking.

If no VPS/PDC signal is detected from the station,

“VPS/PDC” will blink at a slower rate.

C Press – –:– – or START+ again to return to normal display.

NOTES:

● To Timer-Record Weekly Or Daily Serials . . .

. . . anytime during steps D through I, press WEEKLY (number

key “9”) for weekly serials or DAILY (number key “8”) for daily

serials (Monday – Friday). Either “WEEKLY” or “DAILY”

appears on the TV screen. Pressing the button again makes the

corresponding indication disappear.

● During timer recording . . .

. . .it is not possible to disengage the timer mode.

. . .it is not possible to change the recording deck (HDD or

VHS).

Download from Www.Somanuals.com. All Manuals Search And Download.

TIMER RECORDING (cont.)

C ^{Access the Programme screen.}

PROGRAMME

Press r t to select the

programme, then press OK.

VPS/PDC

RECORD TO

HDD

REC MODE

SEP

WEEKLY/DAILY

WEEKLY

TV PROG

5 CH

START

23:30

STOP

00:00

DATE

12/06/01 TUE

CONFIRM

CANCEL

CATEGORY

UNDECIDED

–

CHANGE SETTINGS BY REMOTE

THEN CONFIRM

PROG.

EXIT

START STOP DATE

To cancel or change a programme...

D ^{Cancel or change a programme.}

To cancel the programme, press w r e t to move the

arrow to “CANCEL“, then press OK.

To change programme settings, press the appropriate

button: START+/–, STOP+/–, DATE+/–, PR+/–, VPS/PDC

and/or MODE (p).

● You can change “TV PROG” to “SAT” for the channel position

by pressing the number key “0”.

E ^{Return to the normal screen.}

Check, cancel and change programmes

Press w r e t to move the arrow to “CONFIRM“, then

press OK.

A ^{Disengage the timer mode. (VHS deck only)}

Press # (TIMER), then press 1.

F ^{Return to the timer mode.}

Press # (TIMER).

B ^{Access the Programme Check screen.}

DATE

PROGRAMME CHECK

Press ".

START–STOP PROG. RECORD TO REC MODE VPS/PDC

12/06/01 TUE 15:40

–

16:00 PR.

HDD

S-VHS/VHS

OFF

INDEX

SELECT WITH

THEN PRESS [OK]

SELECT OK EXIT

Download from Www.Somanuals.com. All Manuals Search And Download.

ATTENTION

● Be sure not to turn on the satellite receiver before the

Automatic Satellite

Programme

programme is executed; otherwise, the recorder will start

recording when the satellite receiver’s power is turned on.

● If you have connected another appliance other than a

satellite receiver to the AV2 (L-2) IN/DECODER connector,

be sure not to engage the Automatic Satellite Programme

Recording mode; otherwise, the recorder will start

recording when the connected appliance’s power is turned

on.

Recording

● Automatic Satellite Programme Recording and

timer-recording cannot be done at the same time.

Before performing the following steps:

NOTE:

● Make sure the satellite receiver is connected to the recorder’s

AV2 (L-2) IN/DECODER connector. (੬ pg. 70, 71)

● Programme the timer on the satellite receiver.

This function is available for the HDD deck only.

This function allows you to automatically record a

satellite programme which is timer-programmed on your

external satellite receiver. Connect a satellite receiver to

the recorder’s AV2 (L-2) IN/DECODER connector and

programme the timer on the satellite receiver. When the

signals come into the recorder from the satellite receiver,

the recorder automatically turns on and starts recording

on HDD deck.

A ^{Select the L-2 SELECT mode.}

Set “L-2 SELECT” to “A/V” or “SAT” (੬ pg. 65).

● When you select “SAT”, refer to “IMPORTANT” on page 70.

B ^{Set the recording speed.}

Press MODE (p).

Engage the Automatic Satellite Programme

Recording mode.

Press and hold SAT# for about 2 seconds. The SAT#

button lights up.

NOTES:

● To disengage the Automatic Satellite Programme Recording mode, press SAT#.

● If the recorder’s power is off, it is not possible to engage the Automatic Satellite Programme Recording mode.

● In step C, if the SAT# button does not light but instead blinks quickly even though your satellite receiver’s power is off, Automatic

Satellite Programme Recording will not work properly with that satellite receiver*. If this is the case, perform “Express Timer

Programming” (੬ pg. 44) to timer-record a satellite programme.

* Some satellite receivers output signals even if the power is off. Automatic Satellite Programme Recording is not possible with those satellite receivers.

● The SAT# button blinks while Automatic Satellite Programme Recording is in progress.

● For timer programming of the satellite receiver, refer to the instruction manual of the satellite receiver.

● Automatic Satellite Programme Recording is not possible if your satellite receiver does not have a timer.

● Pressing the recorder’s 1 button while Automatic Satellite Programme Recording is in progress turns off the recorder’s power and

disengages the Automatic Satellite Programme Recording mode.

● If there are more than one satellite programmes you wish to record with Automatic Satellite Programme Recording, it is not possible

to set different recording speeds for each programme.

● Depending on the type of satellite receiver, the recorder may not record a slight portion of the beginning of the programme or may

record slightly longer than the actual length of the programme.

● If you engage the Automatic Satellite Programme Recording mode when the satellite receiver’s power is on, the recorder will not

start Automatic Satellite Programme Recording even though the SAT# button blinks. When the satellite receiver shuts off once and

is turned back on again, the recorder starts recording.

● You can also record a programme from your cable system in the same way if the system has a timer.

● Just Clock (੬ pg. 88) does not work when the Automatic Satellite Programme Recording mode is engaged.

● When the Automatic Satellite Programme Recording mode is engaged, or the recorder’s power is turned off after Automatic Satellite

Programme Recording is finished, the recorder will not enter the Timer mode even though “AUTO TIMER” is set to “ON”

(੬ pg. 78).

Download from Www.Somanuals.com. All Manuals Search And Download.

REMOTE CONTROL FUNCTIONS

On the remote control

Remote A/B/C/D Code Switching

The remote control is capable of controlling four JVC video

recorders independently. Each of recorders can respond to one

of four codes (A, B, C or D). The remote control is preset to send

A code signals because your video recorder is initially set to

respond to A code signals. You can easily modify your video

recorder to respond to B, C or D code signals.

A ^{Display the code.}

Press and hold HDD on the remote control for over 2

seconds. The code currently set blinks on the LCD panel.

B ^{Change the remote control code.}

Press the number key “1” for A, “2” for B, “3” for C or

“4” for D.

LCD panel

C ^{Set the remote control code.}

Press OK to set the code.

On the recorder

D ^{Display the code.}

Press 4 on the recorder for over 5 seconds while the

recorder is turned off. The code currently set appears on

the front display panel.

● If the code displayed on the front display panel is different

from the code set on the remote control, go to step E.

E ^{Change the recorder’s code.}

Press 8 on the remote control. The code currently set on

the remote control will be applied to the recorder.

Download from Www.Somanuals.com. All Manuals Search And Download.

TV Multi-Brand Remote Control

A ^{Set the TV brand code.}

Your remote control can operate the basic functions of your TV

set. In addition to JVC TVs, other manufacturer’s TVs can also be

controlled.

Press TV/CABLE/SAT to switch the display to “TV” and

keep pressing the button down until “TV-_ _” appears.

Enter your TV’s brand code using the number keys, then

press OK.

Before performing the following steps:

Turn off the TV using its remote control.

Press 1 on the recorder’s remote control to turn on the

TV and try operations (੬ step B).

● Once you have set the remote control to operate the TV, you

do not have to repeat this step until you replace your remote

control’s batteries.

LCD panel

● Some brands of TV have more than one code. If the TV does

not function with one code, try entering another.

B ^{Operate the TV.}

First, press TV/CABLE/SAT to switch the display to “TV”.

Then press the corresponding button: 1, TV/VCR,

TV PR +/–, TV %+/– (Volume), ^ (TV Muting),

number keys.

● For some brands of TV, you must press OK after having pressed

the number keys.

IMPORTANT

Although the provided remote control unit is compatible with

JVC televisions, as well as many other models, it may not work

with your TV, or in some instances, may have limited function

capability.

BRAND NAME

CODE

JVC

01, 23, 24, 25

BLAUPUNKT

BRANDT

FERGUSON

FINLUX

FUNAI

LG/GOLDSTAR

GRAETZ

GRUNDIG

HITACHI

ITT

Control Your TV Using Additional Buttons

LUXOR

MITSUBISHI

MIVAR

Use the number keys, and the p button, & button or #

button to select the TV’s channel.

NEC

● With televisions under Code 01, 02, 07, 10, 11, 14, 20, 23,

24, 25, 27, 33 or 35, the p button corresponds to the

1-digit/2-digit entry switching button (often labelled – /– –)

of your TV’s remote control.

● With televisions under Code 01, 28, 29 or 34, the &

button corresponds to the 10 + button, and the # button

corresponds to the 20 + button of your TV’s remote

control.

NOKIA

NORDMENDE

PANASONIC

PHILIPS

SABA

SALORA

SAMSUNG

SELECO

02, 12, 33, 34, 35

SHARP

SONY

TELEAVIA

TELEFUNKEN

THOMSON

TOSHIBA

NOTE:

The way these buttons are used is determined by your TV.

Use these buttons as instructed for your TV’s remote control.

Download from Www.Somanuals.com. All Manuals Search And Download.

REMOTE CONTROL FUNCTIONS (cont.)

Satellite Receiver Multi-Brand Remote

Control

A ^{Set the satellite receiver brand code.}

Press TV/CABLE/SAT to switch the display to “CABLE

SAT” and keep pressing the button down until “SATCBL-

_ _” appears.

Your remote control can operate the basic functions of your

satellite receiver set. In addition to JVC satellite receivers, other

manufacturer’s satellite receivers can also be controlled.

Enter your satellite receiver’s brand code using the

number keys, then press OK.

Press 1 on the recorder’s remote control to turn on the

satellite receiver and try operations (੬ step B).

● Once you have set the remote control to operate the satellite

receiver, you do not have to repeat this step until you replace

your remote control’s batteries.

Before performing the following steps:

Turn off the satellite receiver using its remote control.

● Some brands of satellite receiver have more than one code. If

the satellite receiver does not function with one code, try

entering another.

LCD panel

B ^{Operate the satellite receiver.}

First, press TV/CABLE/SAT to switch the display to

“CABLE SAT”.

Then press the corresponding button: 1, TV PR +/–,

number keys.

● For some brands of satellite receiver, you must press p after

having pressed the number keys.

● The number keys may not function with some satellite

receivers.

BRAND NAME

CODE

JVC

AMSTRAD

CANAL SATELLITE

CANAL +

D-BOX

60, 61, 62, 63, 92

ECHOSTAR

ECHOSTAR (VIA DIGITAL)

FINLUX

78, 79, 80

FORCE

GALAXIS

GRUNDIG

HIRSCHMANN

ITT NOKIA

JERROLD

KATHREIN

LUXOR

64, 65

64, 78

70, 71

IMPORTANT

MASCOM

MASPRO

NOKIA

Although the provided remote control unit is compatible with

JVC satellite receivers, as well as many other models, it may not

work with your satellite receiver, or in some instances, may have

limited function capability.

PACE

65, 67, 74, 86, 92

PANASONIC

PHILIPS

66, 84

RFT

SAGEM

SALORA

SIEMENS

SKYMASTER

TPS

TRIAX

WISI

Download from Www.Somanuals.com. All Manuals Search And Download.

EDITING

The display for modification or deletion

HDD NAVIGATION

INDEX

EASY DUBBING

EDITING

About Hybrid

Navigation

3 / 6

TOTAL TIME 0H00M REMAIN TIME 11H07M (SP)

12/06/01 TUE 12/06/01 TUE 12/06/01 TUE 12/06/01 TUE

[UNDECIDED]

12/06/01 TUE 10:30 – 12:55 PR.

145min

PLAY MODIFY DELETE

CANCEL

In the sections “Playback with HDD Navigation” (੬ pg. 24)

and “Playback with VCR Navigation” (੬ pg. 32), it is briefly

described how to search for the beginning of each recorded

programme using the Navigation functions. More detailed

explanations are provided in this section using HDD Navigation

by way of example.

INDEX NAVIGATION

SELECT WITH

THEN PRESS [OK]

SELECT OK EXIT

The display for easy dubbing

HDD NAVIGATION

This recorder has a built-in Hybrid Navigation system, which

consists of two Navigation systems (HDD Navigation and VCR

Navigation). Using Navigation system, you can easily modify

registered information or edit the programme when dubbing

from the HDD deck to VHS deck, as well as search for the

beginning of each programme.

INDEX

EASY DUBBING

EDITING

3 / 6

TOTAL TIME 0H00M REMAIN TIME 11H07M (SP)

12/06/01 TUE 12/06/01 TUE 11/06/01 MON 10/06/01 SUN

[UNDECIDED]

12/06/01 TUE 10:30 – 12:55 PR.

145min

DUB START DUB/DEL CANCEL

About registration of information

INDEX NAVIGATION

The following information is automatically registered for each

programme when ordinary recording or timer recording is

performed, then stored in an area specified on the hard disk. For

the VHS deck, set “NAVIGATION” to “ON” (੬ pg. 75).

● index* (reduced still pictures to show programme titles)

● programme title*

SELECT WITH

THEN PRESS [OK]

AND [MEMO]

SELECT OK EXIT

The display for editing

HDD NAVIGATION

● category*

R.A.EDIT

● date and time

● channel

● recording speed

● length of recording time

The items marked with an asterisk (*) can be easily modified and

registered again after recording by using Navigation system.

0:05:10

0:01:42

0:10:18

–:––:––

0:06:37

0:02:53

–:––:––

0:10:18

IN / OUT

EDIT START

MODIFY

RETURN TOTAL 0:01:50

INDEX NAVIGATION

SEARCH IN/OUT POINT WITH [345 9]

THEN PRESS IN/OUT

About editing of programmes

SELECT OK EXIT

Navigation system has four functions for editing of programmes.

● “Modify Information” (੬ pg. 52)

● “Delete Information” (੬ pg. 55)

● “Easy Dubbing from HDD deck to VHS deck” (੬ pg. 56)

● “Random Assemble Editing” (੬ pg. 60)

The limitations of registration

You can register information up to 60 programmes in HDD

Navigation. In VCR Navigation, you can register information up

to 2000 programmes or up to 680 cassettes.

To register the information for VCR Navigation, you need to

record a programme for more than 8 minutes in SP mode (for

more than 15 minutes in LP mode or for more than 23 minutes

in EP mode).

When the amount of information is at the limits of registration,

you cannot record new programme any more. In this case, you

need to delete old programmes to register new one (੬ pg. 55).

Download from Www.Somanuals.com. All Manuals Search And Download.

EDITING (cont.)

C ^{Access the Navigation screen.}

● The Navigation screen corresponding to the selected deck

appears.

● For the VHS deck:

Modify

Information

NOTE:

Press NAVIGATION.

When “NAVIGATION” is set to “OFF” (੬ pg. 75), the

Navigation screen does not appear.

D ^{Select the programme.}

The Navigation systems cannot work during recording on the

HDD deck or in SAT# mode (੬ pg. 47).

Press w e to move the arrow to select one programme

you want to modify, then press t or OK.

E ^{Access the modify screen.}

A Press w e to move the arrow to “MODIFY”, then press

OK.

B Press w e to move the arrow to “MODIFY INDEX”,

then press OK. The “MODIFY INDEX” screen appears.

F ^{Register new index.}

HDD NAVIGATION

A Search for the picture

MODIFY INDEX

MODIFY TITLE

MODIFY CATEGORY

from the programme by

pressing the appropriate

buttons (3, 4, 5, or

9). The pictures of the

programme appear on the

left window.

REPLACE

0:10:30

[UNDECIDED]

SP 30min

12/06/01 TUE 12:25 – 12:55 PR.

RETURN

INDEX NAVIGATION

SELECT PICTURE WITH [34 5 9]

THEN PRESS "REPLACE"

SELECT OK EXIT

B Confirm the arrow is on

“REPLACE”, then press

OK to register new index.

New index appears on the

right window.

● When you press OK with the arrow on “RETURN” you can

return the previous screen.

G ^{Return to the normal screen.}

Press NAVIGATION.

● For the VHS deck:

Press 8 to cancel pause mode after pressing NAVIGATION.

Modify Index

A ^{Turn on the recorder.}

Press 1.

B ^{Select the deck.}

Press HDD or S-VHS.

● For the VHS deck:

Insert a cassette with the record safety tab intact.

Download from Www.Somanuals.com. All Manuals Search And Download.

Modify Programme Title

Perform steps A to D of “Modify Index” (੬ pg. 52) before

continuing.

A ^{Access the modify screen.}

A Press w e to move the arrow to “MODIFY”, then press

OK.

B Press w e to move the arrow to “MODIFY TITLE”,

then press OK. The “MODIFY TITLE” screen appears.

B ^{Enter new title.}

HDD NAVIGATION

Press w r e t to move the

MODIFY INDEX

MODIFY TITLE

MODIFY CATEGORY

arrow to the desired letter or

command, then press OK.

Repeat this process to

complete the title.

•

–

[

]

ENTER

DELETE

DELETE ALL

[UNDECIDED]

30min

12/06/01 TUE 12:25 – 12:55 PR.

RETURN

INDEX NAVIGATION

SELECT WITH

THEN PRESS [OK]

SELECT OK EXIT

● To correct a letter, press w r e t to move the arrow to

“DELETE” or “DELETE ALL”, then press OK.

● You can enter the letters up to 15.

● You can also enter the new title with number keys. For

example, when you press 2 repeatedly, “A”, ”B”, ”C”, ”2”, ”A”

appears by turns. You can use the following buttons.

Number keys: for entering letters, numbers, marks (–, +, *)

and blank space

< > buttons: for moving the entering or inserting point

DEL button: for correcting a letter

C ^{Register new title.}

Press w r e t to move the arrow to “ENTER“, then press

OK.

D ^{Return to the Navigation screen.}

Press w r e t to move the arrow to “RETURN“, then

press OK. The Navigation screen appears again.

E ^{Return to the normal screen.}

Press NAVIGATION.

Download from Www.Somanuals.com. All Manuals Search And Download.

EDITING (cont.)

Modify Category

Perform steps A to D of “Modify Index” (੬ pg. 52) before

continuing.

A ^{Access the modify screen.}

A Press w e to move the arrow to “MODIFY”, then press

OK.

B Press w e to move the arrow to “MODIFY

CATEGORY”, then press OK. The “MODIFY

CATEGORY” screen appears.

B ^{Select new category.}

arrow to the desired category,

then press OK.

HDD NAVIGATION

Press w r e t to move the

MODIFY INDEX

MODIFY TITLE

MODIFY CATEGORY

CHILDREN

EDUCATIONS

RELIGIOUS

SPECIAL

CLASSICS

MOVIES

SERIES

COMEDY

MUSIC

DRAMA

NEWS

SHOW

SHOPPING

SPORTS

OTHERS

UNDECIDED

[UNDECIDED]

SP 30min

12/06/01 TUE 12:25 – 12:55 PR.

RETURN

INDEX NAVIGATION

SELECT WITH

THEN PRESS [OK]

SELECT OK EXIT

C ^{Register new category.}

Press w r e t to move the arrow to “RETURN“, then

press OK. The Navigation screen appears again.

D ^{Return to the normal screen.}

Press NAVIGATION.

Download from Www.Somanuals.com. All Manuals Search And Download.

Delete Information

For HDD Navigation:

When you delete the registered information of a programme, the

recorder delete the programme itself on the hard disk drive. The

deleted programme is never resumed.

For VCR Navigation:

When you delete the registered information of a programme, the

recorder delete only the information on the hard disk drive. The

programme itself cannot be deleted with VCR Navigation.

Perform steps A to C of “Modify Index” (੬ pg. 52) before

continuing.

A ^{Select the programme.}

Press w e to move the arrow to select one programme

whose information you want to delete, then press t or

OK.

● For the VHS deck:

You can delete all the information of a cassette at the

“CASSETTE #”.

B ^{Access the delete screen.}

Press w e to move the arrow to “DELETE”, then press OK.

The message appears for your confirmation.

C ^{Confirm the deletion.}

Press w e to select “DELETE”, then press OK.

● When you cancel the deletion, select “CANCEL”, then press

OK.

D ^{Return to the normal screen.}

Press NAVIGATION.

Download from Www.Somanuals.com. All Manuals Search And Download.

EDITING (cont.)

Easy Dubbing from HDD deck to VHS

deck

Dubbing

Because this recorder includes both HDD deck and VHS deck,

you can easily use it for dubbing without connecting any other

equipment.

A ^{Access the HDD Navigation screen.}

Press HDD, then press NAVIGATION. The HDD

Navigation screen appears.

B ^{Access the Easy Dubbing screen.}

Press w e to move the arrow to “EASY DUBBING”, then

press OK. The Easy Dubbing screen appears.

C ^{Select the programme(s).}

HDD NAVIGATION

Press w e to move the arrow

INDEX

EASY DUBBING

EDITING

to the desired programme,

then press OK.

3 / 6

TOTAL TIME 0H00M REMAIN TIME 11H07M (SP)

● When you want to select the

plural programmes, press

MEMO after selecting the

desired programme. The

numbers of the playback order

appear on the index. You can

select up to 8 programmes.

12/06/01 TUE 12/06/01 TUE 11/06/01 MON 10/06/01 SUN

[UNDECIDED]

12/06/01 TUE 10:30 – 12:55 PR.

145min

DUB START DUB/DEL CANCEL

INDEX NAVIGATION

SELECT WITH

THEN PRESS [OK]

AND [MEMO]

SELECT OK EXIT

● When you want to correct the order, move the arrow on the

desired index and press MEMO. The number disappears and

the recorder re-numbers the other programmes automatically.

● When you want to cancel the order, move the arrow to

“CANCEL” and press OK.

D ^{Select the dubbing option.}

Press w r e t to move the arrow to “DUB START” or

“DUB/DEL”, then press OK. The message for preparing a

cassette appears.

● When “DUB START” is selected, the programmes remains on

the hard disk after dubbing.

● When “DUB/DEL” is selected, the recorder delete the

programmes on the hard disk after dubbing automatically.

Download from Www.Somanuals.com. All Manuals Search And Download.

E ^{Select the VHS deck.}

Press S-VHS.

F ^{Load a cassette.}

Insert a cassette with the record safety tab intact.

G ^{Set the recording speed.}

Press MODE (p).

● For the VHS deck:

It is not possible to select EP mode if “COLOUR SYSTEM” is

set to “MESECAM”. (੬ pg. 76)

H ^{Locate the start point.}

A Search for the point where you want to start dubbing

by pressing 4, 5 or 3 then press 8.

B Press 7 and 9 simultaneously to enter the Record-

Pause mode.

I ^{Select the HDD deck.}

Press HDD. The Easy Dubbing screen appears again.

● To cancel dubbing, select “CANCEL”.

J ^{Start dubbing.}

Press w e to move the arrow to “DUB START”, then press

OK. When the dubbing completes successfully, the

message “DUBBING COMPLETED” appears on the TV

screen.

● To stop dubbing, press 8.

● Once the dubbing is stopped, it can not be resumed. In this

case, the message appears on the TV screen, and the

programmes on the hard disk drive are not deleted even

though “DUB/DEL” is selected.

NOTE:

If you start dubbing without setting the VHS deck to Record

Pause mode in step H, you can watch the preview.

Download from Www.Somanuals.com. All Manuals Search And Download.

EDITING (cont.)

You can dub selected scenes from the HDD deck to a cassette,

starting and stopping wherever you wish.

Normal Dubbing

A ^{Load a cassette.}

(from HDD to VHS)

Insert a cassette with the record safety tab intact.

B ^{Prepare the HDD deck for dubbing.}

A Press HDD and select the programme to be dubbed.

You can select the programme by HDD Navigation.

(੬ pg. 24)

B Press PR+/– to set the channel other than “DUB”.

C ^{Locate the start point.}

A Search for the point where you want to start dubbing

by pressing 4, 5 or 3 then press 8.

B Press 3 a little, then press 4 to start playback.

C Press 9 to pause playback a little before the start

point.

D ^{Prepare the VHS deck for dubbing.}

A Press S-VHS.

B Press PR+/– to set the channel “DUB”.

C Press MODE (p) to select tape speed.

D Search for the point where you want to start dubbing

by pressing 4, 5 or 3 then press 8.

E ^{Start dubbing.}

A Press HDD and 4 to start playback.

B Press S-VHS and 7 (7 and 4 on the remote control)

to start dubbing.

F ^{End dubbing.}

Press 8. Then press HDD and press 8.

NOTES:

● There may be a discrepancy of several seconds between where

you intend editing to start, and where it actually starts.

● The superimposed indication during the operation or dubbing

is not recorded.

Download from Www.Somanuals.com. All Manuals Search And Download.

You can dub selected scenes from a cassette to the HDD deck,

starting and stopping wherever you wish.

Normal Dubbing

A ^{Load a cassette.}

(from VHS to HDD)

Insert a cassette with the record safety tab intact.

B ^{Prepare the VHS deck for dubbing.}

A Press S-VHS and select the programme to be dubbed.

You can select the programme by VCR Navigation.

(੬ pg. 32)

B Press PR+/– to set the channel other than “DUB”.

● Set “PICTURE CONTROL” to “EDIT” (੬ pg. 77).

C ^{Locate the start point.}

A Search for the point where you want to start dubbing

by pressing 4, 5 or 3 then press 8.

B Press 3 a little, then press 4 to start playback.

C Press 9 to pause playback a little before the start

point.

D ^{Prepare the HDD deck for dubbing.}

A Press HDD.

B Press PR+/– to set the channel “DUB”.

C Press MODE (p) to select recording speed.

E ^{Start dubbing.}

A Press S-VHS and 4 to start playback.

B Press HDD and 7 (7 and 4 on the remote control) to

start dubbing.

● To enter Record-Pause mode, press and hold 7 and press 9

on the remote control. To resume recording, press and hold 7

and press 4 on the remote control.

F ^{End dubbing.}

Press 8. Then press S-VHS and press 8.

NOTES:

● There may be a discrepancy of several seconds between where

you intend editing to start, and where it actually starts.

● The superimposed indication during the operation or dubbing

is not recorded.

● For HDD deck, the recording pause takes effect only when the

recorder is recording on the HDD deck with the channel set to

“L-1”, “F-1”, or “DUB”. The recording pause is released in 5

minutes automatically. Picture and sound may be distorted at

the point where the recording pause is released.

● Dubbing copyright guarded tape is not possible.

● When you select “EDIT” to dub tapes in step B, be sure to

select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”)

after you finish dubbing the tapes.

Download from Www.Somanuals.com. All Manuals Search And Download.

EDITING (cont.)

8-programme Editing Memory

Random Assemble

Editing

(1 programme x 8 scenes)

By using the Random Assemble Editing function, you can select

up to 8 scenes from a previously recorded programme on the

HDD deck and automatically dub them onto a cassette on the

VHS deck.

Random Assemble Editing is possible only when dubbing from

the HDD deck to the VHS deck.

A ^{Load a cassette.}

Insert a cassette with the record safety tab intact.

B ^{Select the HDD deck.}

Press HDD.

C ^{Access the HDD Navigation screen.}

Press NAVIGATION. The HDD Navigation screen

appears.

D ^{Access the edit screen.}

Press w e to move the arrow to “EDITING”, then press

OK.

E ^{Select the programme.}

Press w e to move the arrow to select one programme

you want to edit, then press t or OK.

F ^{Access the R.A.Edit screen.}

Press OK at the “R.A.EDIT”. The R.A.Edit screen appears.

G ^{Start playback of the source programme.}

Press 4 to start playback. The playback pictures appear

in the window of the R.A.Edit screen. The first edit-in

time starts counting with the arrow to “IN/OUT”.

Download from Www.Somanuals.com. All Manuals Search And Download.

I ^{Select other edit-in and edit-out points.}

Repeat step H. You can select up to 8 pairs of edit-in and

edit-out points.

To modify the points

A Move the arrow to “MODIFY”, then press OK.

B Press w r e t to select the desired point, then press

OK. The selected point starts couting.

C Repeat step H.

J ^{Access the Start Editing screen.}

Press w r e t to move the arrow to “EDIT START”, then

press OK. The Start Editing screen with message appear.

K ^{Prepare the VHS deck for dubbing.}

A Press S-VHS.

B Search for the point where you want to start dubbing

by pressing 4, 5 or 3 then press 8.

C Press 7 and 9 simultaneously to enter the Record-

Pause mode.

L ^{Access the Start Editing screen.}

Press HDD. The Start Editing screen with message appear

again.

M ^{Start editing.}

Press w r e t to move the arrow to “OK”, then press

OK. The editing starts. The message “EDITING

COMPLETED” appears when the editing is complete

successfully.

H ^{Set edit-in and edit-out points.}

HDD NAVIGATION

R.A.EDIT

A Find the point where you

N ^{Return to R.A.Edit screen.}

want the edited scene to

begin, then press OK with

0:05:10

0:01:42

0:10:18

–:––:––

0:06:37

0:02:53

–:––:––

Press OK.

the arrow to “IN/OUT”.

The edit-in time is fixed

and the edit-out time starts

counting.

0:10:18

● If you want to continue to edit, start from step G.

IN / OUT

EDIT START

MODIFY

RETURN TOTAL 0:01:50

O ^{Stop editing.}

INDEX NAVIGATION

SEARCH IN/OUT POINT WITH [345 9]

THEN PRESS IN/OUT

SELECT OK EXIT

Press NAVIGATION. The VHS deck stops recording and

enters the Record-Pause mode. Press S-VHS, then press

B Find the point where you want the edited scene to

end, then press OK with the arrow to “IN/OUT”. The

edit-out time is fixed and the next edit-out time starts

counting.

● Press 3, 4, 5 or 9 to find the edit-in and edit-out

points.

Download from Www.Somanuals.com. All Manuals Search And Download.

EDITING (cont.)

You can use a camcorder as the source player and your

recorder as the recording deck.

Edit From A

Camcorder

A ^{Make connections.}

A If the camcorder has no S-VIDEO output connector ...

... connect the camcorder’s AUDIO OUT and VIDEO

OUT connectors to the recorder’s front panel AUDIO

and VIDEO input connectors.

AUDIO input

B If the camcorder has an S-VIDEO output connector ...

... connect the camcorder’s AUDIO OUT and

S-VIDEO OUT connectors to the recorder’s front panel

AUDIO and S-VIDEO input connectors.

Recorder

● When using a monaural camcorder, connect its AUDIO OUT

connector to the AUDIO L input connector on your recorder.

● For the VHS deck:

When a Master Edit Control-equipped JVC camcorder is used,

the camcorder is capable of controlling the recorder. Refer to

the camcorder’s instruction manual for operating procedure.

VIDEO

input

PAUSE

connector

Audio cable

(not provided)

Video cable

(not provided)

AUDIO

OUT

Camcorder

VIDEO OUT

Mini-plug cable

(not provided)

(JVC camcorder only)

Player

EDIT

AUDIO input

Recorder

S-VIDEO

input

Audio cable

(not provided)

PAUSE

connector

AUDIO

OUT

S-Video cable

(not provided)

Camcorder

S-VIDEO OUT

Mini-plug cable

(not provided)

(JVC camcorder only)

Player

EDIT

Download from Www.Somanuals.com. All Manuals Search And Download.

B ^{Select the recording deck.}

Press HDD or S-VHS.

C ^{Set the recorder’s input mode.}

Press AUX (number key “0”) and/or PR to select “F-1”.

● Set “F-1 INPUT” to “VIDEO” for the VIDEO input connector,

or “S-VIDEO” for the S-VIDEO input connector, depending on

the connector being used (੬ pg. 65).

D ^{Set the edit mode. (VHS deck only)}

See “PICTURE CONTROL” on page 77.

E ^{Start the camcorder.}

Engage the Play mode of the camcorder.

F ^{Start the recorder.}

Engage the Record mode of the recorder.

NOTES:

● All necessary cables can be obtained from your dealer.

● When you select “EDIT” to dub tapes in step D, be sure to

select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”)

after you finish dubbing the tapes.

● For HDD deck, the recording pause takes effect only when the

recorder is recording on the HDD deck with the channel set to

“L-1”, “F-1”, or “DUB”. The recording pause is released in 5

minutes automatically. Picture and sound may be distorted at

the point where the recording pause is released.

Download from Www.Somanuals.com. All Manuals Search And Download.

EDITING (cont.)

Select the output or input mode for the AV1

(L-1) IN/OUT connector.

Output/Input Set

HDD/VCR SET UP FUNCTION SET UP

FUNCTION

INITIAL SET UP

A Press rt to move the

arrow to “L-1 OUTPUT”

or “L-1 INPUT”, then

press OK.

INPUT/OUTPUT

L-1 OUTPUT

VIDEO

S-VIDEO

L-1 INPUT

L-2 SELECT

F-1 INPUT

VIDEO

A/V

VIDEO

B Press rt to select the

appropriate setting, then

press OK.

* The default setting is bold in

the table below.

INDEX

SELECT WITH

THEN PRESS [OK]

SELECT OK EXIT

⁸L-1 OUTPUT

VIDEO:

If a connected appliance’s input is

compatible only with regular video

signals, set to “VIDEO”.

If a connected appliance’s input is

compatible with Y/C signals, set to

“S-VIDEO”. You can obtain

S-VIDEO:

high-quality S-VHS picture. (For

connection, be sure to use a 21-pin

SCART cable that is compatible with

the Y/C signal.)

⁸L-1 INPUT

VIDEO:

If a connected appliance’s output is

compatible only with regular video

signals, set to “VIDEO”.

If a connected appliance’s output is

compatible with Y/C signals, set to

“S-VIDEO”. You can obtain

S-VIDEO:

high-quality S-VHS picture. (For

connection, be sure to use a 21-pin

SCART cable that is compatible with

the Y/C signal.)

L-1 OUTPUT and L-1 INPUT Setting

The AV1 (L-1) IN/OUT connector accepts and delivers either a

composite signal (regular video signal) or a Y/C signal (a signal

in which the luminance and chrominance signals are separated).

Set “L-1 OUTPUT” and “L-1 INPUT” to the appropriate mode

depending on the type of appliance connected to the recorder’s

AV1 (L-1) IN/OUT connector.

D ^{Return to the normal screen.}

Press MENU.

NOTES:

● If “L-1 OUTPUT” is set to “S-VIDEO”, it is impossible to set

“L-1 INPUT” to “S-VIDEO”.

● If “L-2 SELECT” is set to “DECODER”, it is impossible to set

“L-1 INPUT” to “S-VIDEO”.

A ^{Access the Main Menu screen.}

Press MENU.

B ^{Access the Input/Output Set screen.}

A Press w e to move the arrow to “FUNCTION SET UP”,

then press t or OK.

B Press w e to move the arrow to “INPUT/OUTPUT”,

then press OK.

Download from Www.Somanuals.com. All Manuals Search And Download.

L-2 SELECT Setting

F-1 INPUT Setting

Set “L-2 SELECT” to the appropriate mode depending on the

type of appliance connected to the recorder’s AV2 (L-2) IN/

DECODER connector.

Set “F-1 INPUT” to the appropriate mode depending on the

connector (VIDEO or S-VIDEO) being used on the front panel.

Perform steps A and B of “L-1 OUTPUT and L-1 INPUT

Setting” on page 64.

Perform steps A and B of “L-1 OUTPUT and L-1 INPUT

Setting” on page 64.

Select the input mode for the VIDEO/S-

Select the input mode for the AV2 (L-2) IN/

VIDEO connector.

DECODER connector.

HDD/VCR SET UP FUNCTION SET UP

FUNCTION

INITIAL SET UP

A Press rt to move the

arrow to “F-1 INPUT”,

then press OK.

B Press rt to select the

appropriate setting, then

press OK.

* The default setting is bold in

the table below.

INPUT/OUTPUT

HDD/VCR SET UP FUNCTION SET UP

FUNCTION

INITIAL SET UP

A Press rt to move the

arrow to “L-2 SELECT”,

then press OK.

B Press rt to select the

appropriate setting, then

press OK.

* The default setting is bold in

the table below.

INPUT/OUTPUT

L-1 OUTPUT

VIDEO

A/V

L-1 INPUT

L-2 SELECT

F-1 INPUT

L-1 OUTPUT

VIDEO

L-1 INPUT

L-2 SELECT

F-1 INPUT

VIDEO

S-VIDEO

A/V

VIDEO

DECODER

SAT

INDEX

SELECT WITH

THEN PRESS [OK]

SELECT OK EXIT

INDEX

SELECT WITH

THEN PRESS [OK]

SELECT OK EXIT

⁸F-1 INPUT

⁸L-2 SELECT

VIDEO:

When connecting an appliance to

the VIDEO input connector, set to

“VIDEO”.

When connecting an appliance to

the S-VIDEO input connector, set to

“S-VIDEO”.

A/V:

To use this recorder as the recording

deck with the player connected to

the AV2 (L-2) IN/DECODER

connector, or to use the satellite

receiver connected to the AV2 (L-2)

IN/DECODER connector.

S-VIDEO:

DECODER: To use a decoder connected to the

AV2 (L-2) IN/DECODER connector.

B ^{Return to the normal screen.}

SAT:

To view a satellite programme with

the TV set while the recorder is

turned off. (੬ pg. 70)

Press MENU.

B ^{Return to the normal screen.}

Press MENU.

NOTES:

● If you have a satellite receiver or a decoder connected to the

AV2 (L-2) IN/DECODER connector, be sure to set “L-2

SELECT” back to appropriate mode after editing.

● If you are not connecting a satellite receiver or a decoder to

the AV2 (L-2) IN/DECODER connector, leave “L-2 SELECT” set

to “A/V”.

● The default setting is “A/V”; if the recorder’s memory backup

has expired due to a power cut or because the AC was

removed from the recorder, “A/V” will be automatically

selected when the power is restored to the recorder. If you are

using a satellite receiver or a decoder, be sure to set “L-2

SELECT” back to appropriate mode.

● When “L-2 SELECT” is set to “SAT”, “SAT” appears on TV

screen or front display panel instead of “L-2” or “L2”.

● If “L-1 OUTPUT” is set to “S-VIDEO”, it is impossible to set

“L-2 SELECT” to “DECODER”.

Download from Www.Somanuals.com. All Manuals Search And Download.

EDITING (cont.)

You can use your recorder as the source player or as the

recording deck.

Edit To Or From

Another Video

Recorder

A ^{Make connections.}

Connect the player’s 21-pin SCART connector to the

recorder’s 21-pin SCART connector as illustrated on

page 67.

A When using your recorder as the source player ...

... connect its AV1 (L-1) IN/OUT connector to the

recording deck.

B When using your recorder as the recording deck ...

... connect its AV1 (L-1) IN/OUT or AV2 (L-2) IN/

DECODER connector to the source player.

C If another recorder is compatible with the Y/C signal ...

... connect your recorder’s AV1 (L-1) IN/OUT

connector to another recorder.

With C connection ...

● When using your recorder as the recording deck, set “L-1

INPUT” to “S-VIDEO” and “L-2 SELECT” to “A/V” (੬ pg. 64,

65).

● When using your recorder as the source player, set “L-1

OUTPUT” to “S-VIDEO” (੬ pg. 64).

B ^{Select the recording deck.}

Press HDD or S-VHS.

C ^{Set the input mode of recording deck.}

With this video recorder, press AUX (number key “0”)

and/or PR to select “L-1” for the AV1 (L-1) IN/OUT

connector, or “L-2” for the AV2 (L-2) IN/DECODER

connector, depending on the connector being used.

● When using another recorder as the recording deck, refer to its

instruction manual.

● When using the AV2 (L-2) IN/DECODER connector, set “L-2

SELECT” to “A/V” (੬ pg. 65).

D ^{Set the edit mode.}

See “PICTURE CONTROL” on page 77.

Advantages of S-VHS video recorders

You can edit from VHS to S-VHS, S-VHS to VHS, or, from

S-VHS to S-VHS.

E ^{Start the source player.}

● From VHS to S-VHS: Record VHS playback signals in the

S-VHS mode. Although the picture quality is inherently

limited by that of the original, the edited tape has better

picture quality than those made by VHS-to-VHS editing.

● From S-VHS to VHS: Because the picture quality of the

source material is very high, the edited tape has better

picture quality than those made by VHS-to-VHS editing.

● From S-VHS to S-VHS: All signals will be transferred with

minimum degradation.

Engage the Play mode of the source player.

F ^{Start the recording deck.}

Engage the Record mode of the recording deck.

Download from Www.Somanuals.com. All Manuals Search And Download.

TV receiver

Player

Your recorder

Recorder

Your recorder

TV receiver

21-pin SCART cable

(not provided)

AV mode

21-pin SCART cable

(not provided)

Another recorder

Recorder

Player

TV receiver

Recorder

Your recorder

S-Video cable

(provided)

21-pin SCART cable

(not provided)

Another recorder

Player

NOTES:

● All necessary cables can be obtained from your dealer.

● For Y/C signal input/output, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.

● When you select “EDIT” to dub tapes in step D, be sure to select “AUTO” (or “NORM” when “B.E.S.T.” is set to “OFF”) after you

finish dubbing the tapes.

● When you use this recorder as the source player for editing, be sure to set “O.S.D.” to “OFF” before starting (੬ pg. 78).

● If you are using another recorder with S-Video and Audio input/output connectors, you can connect those connectors to this

recorder’s S-VIDEO and AUDIO input/output connectors.

When using your recorder as the source player ...

... connect its rear panel S OUT and AUDIO OUT connectors to the recording deck’s S-Video and Audio input connectors.

When using your recorder as the recording deck ...

... connect its front panel S-VIDEO and AUDIO input connectors to the source player’s S-Video and Audio output connectors. Then,

set the recorder’s input mode to “F-1”, and set “F-1 INPUT” to “S-VIDEO” (੬ pg. 65).

Download from Www.Somanuals.com. All Manuals Search And Download.

EDITING (cont.)

Audio Dubbing

Audio Dubbing replaces the normal audio sound of a

previously recorded tape with a new soundtrack.

ATTENTION:

● Audio dubbing is not possible on the HDD deck.

● Audio dubbing is not possible with a cassette recorded in

EP mode.

Normal audio track

Pre-recorded tape

Video/Hi-Fi audio

track

Audio-dubbed tape

Your recorder

CD player, etc.

Mixer output

Audio mixer

Original sound

AUDIO OUT

Your recorder

Download from Www.Somanuals.com. All Manuals Search And Download.

A ^{Make connections.}

F ^{Start dubbing.}

Connect an audio component to the AUDIO L + R input

connectors on the recorder’s front panel.

Engage the audio component’s Play mode, then press 4

to start the tape in your recorder; Audio Dubbing begins

at this point.

● When connecting a monaural audio component, use only the

recorder’s AUDIO L input connector.

● “o” blinks and “u” is displayed on the front display panel.

● To stop dubbing temporarily, press 9. Press 4 to resume

dubbing.

B ^{Select the VHS deck.}

Press S-VHS.

G ^{End Audio Dubbing.}

Press 8 to stop the tape in your recorder, and engage the

audio component’s Stop mode.

C ^{Set the recorder’s input mode.}

Press AUX (number key “0”) and/or PR to select “F-1”.

NOTES:

● When monitoring the sound during Audio Dubbing, the

normal soundtrack is automatically selected. If you wish to

hear the mixed sound (Hi-Fi + Normal soundtracks), press

AUDIO to select “HI FI NORM” (੬ pg. 36).

D ^{Locate the start point.}

Press 4 to start playback of the tape in your recorder, and

press 9 when you reach the point where you want to start

dubbing.

● Audio Dubbing stops automatically when the counter reaches

“0:00:00”, and the recorder enters the Play mode. Check the

counter reading before dubbing.

● Audio Dubbing is also possible using the rear panel AV1 (L-1)

IN/OUT or AV2 (L-2) IN/DECODER connector. When using

these 21-pin SCART connectors, be sure to select the correct

input mode (“L-1” or “L-2”) in step C.

● Audio Dubbing is not possible with cassettes whose record

safety tab has been removed.

E ^{Engage the Audio Dubbing mode.}

● Your recorder enters the Audio Dubbing Pause mode. (“o”

blinks, “u” and “i” light up on the front display panel.)

● To perform Audio Dubbing with audio mixing, press AUDIO

to select “L j h R” at this point.

* Audio Dubbing with audio mixing is not possible if you are using a

monaural audio component, or if you don’t have an audio mixer.

Press A.DUB.

● When playing back an audio-dubbed tape, press AUDIO to

select the soundtrack you wish to hear. (੬ pg. 36)

Download from Www.Somanuals.com. All Manuals Search And Download.

SYSTEM CONNECTIONS

Connecting To A Satellite Receiver

NOTES:

Simple Connections

● Set “L-2 SELECT” to “A/V” (੬ pg. 65).

This is an example of simple connection if your TV has

one 21-pin AV input (SCART) connector.

● You can use Automatic Satellite Programme Recording

function (੬ pg. 47) with this connection.

● To record a programme via the satellite receiver, select L-2

mode by pressing AUX (number key “0”) and/or PR so that

“L-2” appears on the front display panel.

● For details, refer to the instruction manual of the satellite

receiver.

Connect the satellite receiver to the AV2 (L-2) IN/

DECODER connector, then connect the AV1 (L-1) IN/

OUT connector to the TV’s connector.

Aerial

connector

Outdoor unit

Aerial

Back of TV

TV aerial

cable

Satellite cable

Satellite receiver

ANTENNA IN

ANTENNA OUT

VCR

DECODER

21-pin SCART connector

Mains outlet

AV1 (L-1) IN/OUT ENTREE/SORTIE

ANTENNA

ANTENNE

OUT

SORTIE

ENTREE

AUDIO

OUT

SORTIE

SAT CONTROL

CONTROLEUR SAT

IN/DECODER

AV2 (L-2)

OUT

SORTIE

ENTREE/DECODEUR

Back of recorder

IMPORTANT

When you set “L-2 SELECT” to “SAT” (੬ pg. 65), it is possible to view a satellite broadcast with the TV set to its AV mode even if

the recorder is turned off. When the recorder is in Stop mode or recording, press TV/VCR on the remote control to turn off the VCR

indicator on the front display panel.

● If you turn on the recorder when the satellite receiver’s power is off, nothing appears on the TV screen. In this case, turn on the

satellite receiver, or set the TV to its TV mode, or press TV/VCR on the remote control to set the recorder to the video mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

NOTES:

Perfect Connections

● Set “L-2 SELECT” to “A/V” (੬ pg. 65).

This is an example of recommended connection if your

TV has two 21-pin AV input (SCART) connectors.

Connect the decoder to the satellite receiver’s connector

if you have a decoder, AV1 (L-1) IN/OUT connector to

TV’s connector, and AV2 (L-2) IN/DECODER connector

to the satellite receiver’s connector. Then connect the

satellite receiver and TV.

● You can use Automatic Satellite Programme Recording

function (੬ pg. 47) with this connection.

● To record a programme via the satellite receiver, select L-2

mode by pressing AUX (number key “0”) and/or PR so that

“L-2” appears on the front display panel.

● To receive a scrambled broadcast, descramble the signal with

the satellite receiver.

● For details, refer to the instruction manual of the satellite

receiver and decoder.

21-pin SCART

connector

Aerial

Outdoor unit

Satellite cable

Back of TV

TV aerial

cable

Satellite receiver

ANTENNA IN

VCR

DECODER

EXT.1

EXT.2

ANTENNA OUT

Aerial

connector

Decoder

AV1 (L-1) IN/OUT ENTREE/SORTIE

ANTENNA

ANTENNE

OUT

SORTIE

ENTREE

AUDIO

OUT

SORTIE

SAT CONTROL

CONTROLEUR SAT

IN/DECODER

ENTREE/DECODEUR

AV2 (L-2)

OUT

SORTIE

Back of recorder

Mains outlet

Download from Www.Somanuals.com. All Manuals Search And Download.

SYSTEM CONNECTIONS (cont.)

The AV2 (L-2) IN/DECODER connector can be used as an

input connector for an external decoder (descrambler).

Simply connect a decoder and you can enjoy the variety

of programming that is available through scrambled

channels.

Connecting/Using

A Decoder

A ^{Select the input mode.}

Set “L-2 SELECT” to “DECODER”. (੬ pg. 65)

TV receiver

B ^{Connect the decoder.}

Connect your recorder’s AV2 (L-2) IN/DECODER

connector to the decoder’s 21-pin SCART connector

using a 21-pin SCART cable.

RF cable

(provided)

TV aerial

cable

C ^{Set the tuner.}

AV1 (L-1) IN/OUT

Perform the procedure as described in “When Receiving

A Scrambled Broadcast” on page 86.

AV2 (L-2) IN/DECODER

Decoder

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting/Using A Stereo System

These instructions enable you to connect your video recorder to your Hi-Fi stereo system (if you have one) and listen to

the soundtrack through the stereo.

FM tuner

CD player

Stereo amplifier

AUX IN or TAPE MONITOR

Audio cable

(not provided)

Mains outlet

Speaker

Television

Speaker

AV1 (L-1) IN/OUT ENTREE/SORTIE

ANTENNA

ANTENNE

OUT

SORTIE

ENTREE

AUDIO

OUT

SORTIE

SAT CONTROL

CONTROLEUR SAT

IN/DECODER

AV2 (L-2)

OUT

SORTIE

ENTREE/DECODEUR

Back of recorder

AUDIO OUT

CAUTIONS:

Make connections.

● This recorder has a dynamic range of more than 80 dB with

regards to its Hi-Fi audio capability. It is recommended that

you check the maximum level if you are going to listen to the

Hi-Fi audio signals through a stereo amplifier. A sudden surge

in the input level to the speakers may damage them.

Connect the AUDIO OUT L and R connectors on your

video recorder to the AUX IN or TAPE MONITOR

connectors on your stereo system’s receiver or amplifier.

● Some speakers and televisions are specially shielded to

prevent television interference. If both are of the non-shielded

type, do not place the speakers adjacent to the TV set as this

can adversely affect the video playback picture.

NOTE:

When listening to sound through the connected stereo system,

turn the TV’s volume down completely.

Download from Www.Somanuals.com. All Manuals Search And Download.

SUBSIDIARY SETTINGS

You can change various mode settings on the TV screen

by following the procedure described below.

The table below shows the structure of the menu system.

Mode Set

HDD SET UP (੬ pg. 75)

VCR SET UP 1 (੬ pg. 75)

VCR SET UP 2 (੬ pg. 77)

Turn on the TV and select the AV mode.

HDD/VCR SET UP

FUNCTION (੬ pg. 78)

FUNCTION SET UP

INITIAL SET UP

INPUT/OUTPUT (੬ pg. 64)

TUNER SET (੬ pg. 80)

INITIAL SET (੬ pg. 20, 79, 88)

● For each mode setting, see pages 75 to 78.

● The procedure shows how to set “LIVE MEMORY” to

“3HR” on the “HDD SET UP” screen as an example.

A ^{Access the Main Menu screen.}

Press MENU.

B ^{Access the HDD Set Up screen.}

HDD/VCR SET UP FUNCTION SET UP INITIAL SET UP

A Press w e to move the

HDD SET UP

VCR SET UP 1

VCR SET UP 2

arrow to “HDD/VCR SET

UP”, then press t or OK.

B Press w e to move the

arrow to “HDD SET UP”,

then press OK.

LIVE MEMORY

AUDIO REC

1HR

NICAM

INDEX

SELECT WITH

THEN PRESS [OK]

SELECT OK EXIT

C ^{Select the mode.}

Press rt to move the arrow to “LIVE MEMORY”, then

press OK.

D ^{Select the mode setting.}

then press OK.

HDD/VCR SET UP FUNCTION SET UP INITIAL SET UP

Press rt to select “3HR”,

HDD SET UP

VCR SET UP 1

VCR SET UP 2

LIVE MEMORY

AUDIO REC

1HR

OFF

NICAM

30MIN

1HR

3HR

INDEX

SELECT WITH

THEN PRESS [OK]

SELECT OK EXIT

E ^{Return to the normal screen.}

Press MENU.

Download from Www.Somanuals.com. All Manuals Search And Download.

HDD SET UP

* The default setting is bold in the table below.

When this function is set to “30MIN”, “1HR” or “3HR”, you can enjoy the

selected length of the time for “Live Memory Playback” (੬ pg. 26).

⁸LIVE MEMORY

OFF

30MIN

1HR

3HR

When this function is set to “NICAM”, the NICAM audio programme will be

recorded.

When this function is set to “MONO”, the Standard (monaural) audio

programme will be recorded.

⁸AUDIO REC

NICAM

MONO

NOTE:

This function works only on the NICAM bilingual programme.

VCR SET UP 1

* The default setting is bold in the table below.

When a programme is recorded on the cassette with this function set to “ON”,

you can use VCR Navigation (੬ pg. 32, 51).

⁸NAVIGATION

OFF

Your recorder can record in S-VHS (Super VHS), S-VHS ET or VHS.

⁸S-VHS

AUTO

● To record in S-VHS:

OFF

Set “S-VHS” to “AUTO”. Then, insert a cassette marked “S-VHS”. The S-VHS

indicator lights up on the front display panel.

The S-VHS recording mode is selected.

● To record in S-VHS ET on a VHS cassette:

See “Super VHS ET (S-VHS ET)” on page 39.

● To record in VHS:

Insert a cassette marked “VHS”.

If the S-VHS ET mode is activated, press S-VHS ET. “S-VHS ET : OFF“ appears

on the TV screen, if “O.S.D.“ is set to “ON“.

The VHS recording mode is automatically selected regardless of the “S-VHS”

mode setting.

● To record in VHS on an S-VHS cassette:

Insert a cassette marked “S-VHS”. The S-VHS indicator lights up on the front

display panel. Then, set “S-VHS” to “OFF”. The S-VHS indicator goes off.

The VHS recording mode is selected.

NOTE:

When playing back a tape that has been recorded in S-VHS or S-VHS ET, the S-VHS

indicator lights up on the front display panel regardless of the “S-VHS” mode setting.

Download from Www.Somanuals.com. All Manuals Search And Download.

SUBSIDIARY SETTINGS (cont.)

VCR SET UP 1 (cont.)

* The default setting is bold in the table below.

When this function is set to “ON”, the recorder automatically switches to LP

mode to allow complete recording if there is not enough tape to record the

entire programme while timer-recording in SP mode.

⁸AUTO SP^]LP TIMER

OFF

For Example . . .

Recording a programme of 210 minutes in length onto a 180-minute tape

Approximately 150 minutes

SP mode

Approximately 60 minutes

LP mode

Total 210 minutes

Make sure you set this function to “ON”, before the timer-recording starts.

NOTES:

● If you have programmed the recorder to timer-record 2 or more programmes, the

second programme and those thereafter may not fit on the tape if you set “AUTO

SP]LP TIMER” to “ON”. In this case, make sure the mode is not engaged, then set the

tape speed manually during timer programming.

● In order to ensure that the recording fits on the tape, this feature may leave a slight

non-recorded section at the end of the tape.

● There may be some noise and sound disturbance at the point on the tape where the

recorder switches from SP to LP mode.

● The Auto SP]LP Timer feature is not available during ITR (Instant Timer Recording),

and the feature will not work properly with any tapes longer than E-180, or with some

tapes of shorter lengths.

● If you perform timer recording with both VPS/PDC and the Auto SP]LP Timer

activated, and the programme goes beyond its originally scheduled length, there may

be times when the programme cannot be recorded in its entirety.

You can play back PAL, NTSC and MESECAM tapes, or record PAL and SECAM*

signals on this recorder. Select the appropriate colour system.

⁸COLOUR SYSTEM

PAL/NTSC

MESECAM

PAL/NTSC: To record PAL signals, or play back a PAL or NTSC tape.

MESECAM: To record SECAM signals, or play back a MESECAM tape.

* SECAM signals will be recorded as MESECAM on this recorder; MESECAM is the

designation for tapes with SECAM signals that have been recorded on a

MESECAM-compatible PAL video cassette recorder.

NOTES:

● It is not possible to record in S-VHS if “MESECAM” is selected. The recording mode is

forced to change to VHS.

● If “MESECAM” is selected when the tape speed is set to EP mode, the tape speed will be

forced to change to LP mode.

● It is not possible to select EP mode if “MESECAM” is selected.

About NTSC Playback

● Some TVs shrink the picture vertically and place black bars at the top and bottom of the

TV screen. This is not a malfunction on the part of either the video recorder or the TV.

● The picture may roll up and down. This can be corrected using the V-HOLD control

found on some TVs. (This cannot be corrected if the TV does not have a V-HOLD

control.)

● The counter and tape remaining time readings will be incorrect.

● During search, still, or frame-by-frame playback, the picture will be distorted, and there

may be a loss of colour.

● Depending on the type of TV, the top and bottom portions of superimposed displays

may be cut off during NTSC playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

VCR SET UP 2

* The default setting is bold in the table below.

You can set the B.E.S.T. (Biconditional Equalised Signal Tracking) system to

“ON” or “OFF” (੬ pg. 41).

⁸B.E.S.T.

OFF

This feature helps you to adjust the playback picture quality according to your

⁸PICTURE CONTROL

preference. Normally select “AUTO”.

AUTO

EDIT

AUTO:

Provides the optimised picture benefits of the B.E.S.T. Picture

System.

Minimizes picture degradation during editing (recording and

playback).

Reduces image coarseness when viewing overplayed tapes

containing a lot of noise.

SOFT

SHARP

EDIT:

SOFT:

SHARP:

Clearer, sharper-edged picture when viewing images with lots

of flat, same-coloured surfaces such as cartoons.

NOTES:

● When you select “EDIT”, “SOFT” or “SHARP”, the selected mode will not change until

you select another mode.

● When you select “EDIT” to dub tapes, be sure to select “AUTO” after you finish

dubbing the tapes.

● When “B.E.S.T.” is “OFF”, “PICTURE CONTROL” switches automatically from “AUTO”

to “NORM”.

When this function is set to “ON”, the Digital 3R picture system applies edge

⁸DIGITAL 3R

correction to the luminance signal to enhance detail.

OFF

NOTES:

● Normally it is recommended to keep “DIGITAL 3R” set to “ON”.

● Depending on the type of tape being used, picture quality may be better with “DIGITAL

3R” set to “OFF”.

● If you use the recorder as the source player for editing, be sure to set “DIGITAL 3R” to

“OFF” before starting.

Your recorder is equipped with the Digital TBC (Time Base Corrector) that

removes jitter from fluctuating video signals to deliver a stable picture even with

old tapes and rental cassettes.

The on/off of Digital 3-DNR (Noise Reduction) which cuts noise and enables

clear picture reproduction is also linked to this function.

We recommend that you set “DIGITAL TBC/NR” to “ON” when...

... playing back a tape recorded on a camcorder.

⁸DIGITAL TBC/NR

OFF

... playing back a tape repeatedly used.

... using this video recorder as the source player for editing.

NOTES:

● If you play back a tape recorded under poor TV reception condition, the picture may

become more stable with Digital TBC/NR set to off.

● When “DIGITAL TBC/NR” is set to “ON”, if you play back a tape where certain types of

signals are recorded (using a PC or some character generators), the playback picture

may be distorted. If this is the case, set “DIGITAL TBC/NR” to “OFF”.

● When playing back a MESECAM tape, Digital TBC/NR does not function even though

“DIGITAL TBC/NR” is set to “ON”.

Download from Www.Somanuals.com. All Manuals Search And Download.

SUBSIDIARY SETTINGS (cont.)

VCR SET UP 2 (cont.)

* The default setting is bold in the table below.

When this function is set to “ON”, you can automatically correct vertical

vibration in the picture when playing back unstable recordings made on

another recorder.

⁸VIDEO STABILIZER

OFF

NOTES:

● When you finish viewing a tape, be sure to set this function to “OFF”.

● Regardless of the setting, this function has no effect during recording and during special

effects playback.

● The on-screen display may jitter vertically when this function is set to “ON”.

● To watch recordings with close-caption, set this function to “OFF”.

● Video Stabilizer and Digital TBC/NR cannot be used at the same time. If you activate

Digital TBC/NR when “VIDEO STABILIZER” is set to “ON”, Video Stabilizer will be

automatically turned “OFF”.

FUNCTION

* The default setting is bold in the table below.

When this function is set to “ON”, various operational indicators appear on the

⁸O.S.D.

TV screen. Messages appear in the selected language (੬ pg. 17, 18).

OFF

NOTES:

● When you use this recorder as the source player for editing, be sure to set “O.S.D.” to

“OFF” before starting.

● During playback, the operation mode indicators may be disturbed depending on the

type of tape being used.

When this function is set to “ON”, the timer is automatically engaged when the

recorder power is turned off, and automatically disengaged when the recorder

is powered back on.

⁸AUTO TIMER

OFF

NOTE:

For safety, when “AUTO TIMER” is set to “OFF”, all other recorder functions are disabled

while the Timer mode is engaged. To disengage the timer, press # (TIMER).

When this function is set to “ON”, you can easily start recording the

programme that you are watching on your TV. Press and hold 7 and press 4 on

the remote control, or press 7 on the recorder.

⁸DIRECT REC

OFF

NOTES:

● When you use the Direct Rec function, be sure to use a TV offering T-V LINK, etc. and

connect a fully-wired 21-pin SCART cable between the recorder and the TV

(੬ pg. 12).

● If “DIRECT REC” is set to “OFF”, the 7 button functions as described in “Basic

Recording” (੬ pg. 22, 30).

● During the Direct Rec, “– –” appears on the front display panel.

● If a programme is recorded with the Direct Rec, the station name will not be registered

for the Navigation. “– – – –” will be displayed for the station name.

● Retake function (੬ pg. 38) does not work during Direct Rec.

● Even if there is no power supply for more than 60 minutes, the recorder keeps the

setting.

● If you use the remote control of your TV to record the programme with the Direct Rec,

the programme will be recorded on the HDD deck, even if you select the VHS deck. In

this case, first few seconds of the programme will not be recorded.

Download from Www.Somanuals.com. All Manuals Search And Download.

SHOWVIEW^®System Setup

IMPORTANT

Normally, Auto Set Up (੬ pg. 14), Preset Download (੬ pg. 16) or Auto Channel Set (੬ pg. 80) sets the Guide Program numbers

automatically. You need to set the Guide Program numbers manually only in the following cases.

● When timer-programming with the SHOWVIEW system, the channel position, where the station you wish to record is received on

your recorder, is not selected,

when you add a channel after Auto Set Up, Preset Download or Auto Channel Set has taken place,

—Set the Guide Program number for that station manually.

● When you wish to timer-record a satellite programme with the SHOWVIEW system,

—Set the Guide Program numbers for all satellite broadcasts received on your satellite receiver.

Turn on the TV and select the AV mode.

Guide Program Number Set

E ^{Enter the receiving channel position number.}

Press the number key “0” to

A ^{Access the Main Menu screen.}

select “TV PROG” or “SAT”.

Then press rt to input the

Press MENU.

number of the recorder’s

channel position on which the

Guide Program number’s

B ^{Access the Initial Set screen.}

broadcast is received by the

HDD/VCR SET UP FUNCTION SET UP INITIAL SET UP

A Press w e to move the

arrow to “INITIAL SET

UP”, then press t or OK.

B Press w e to move the

arrow to “INITIAL SET”,

then press OK.

recorder or the satellite

receiver. Then press OK or e.

● To timer-record a satellite

programme with the SHOWVIEW

system, you need to install the

provided Satellite Controller and

perform the procedure described

in “Satellite Receiver Control

Setting” (੬ pg. 19).

TUNER SET

INITIAL SET

(Example) If ZDF is received on

channel position 2.

CLOCK SET

GUIDE PROG SET

SAT CONTROL SET

INDEX

SELECT WITH

THEN PRESS [OK]

SELECT OK EXIT

● Repeat steps D and E as

necessary.

C ^{Access the Guide Program Set screen.}

F ^{Return to the normal screen.}

Press rt to move the highlight bar (pointer) to “GUIDE

PROG SET”, then press OK or e.

Press MENU.

D ^{Enter the Guide Program number.}

Guide Program Number

Press rt to enter the Guide

Program number for the desired

station as shown in the TV

listings. Then press OK or e.

“Guide Program (GUIDE PROG) number” refers to the

assigned TV station numbers, according to broadcast area,

for the SHOWVIEW timer recording. The Guide Program

numbers can be found in most TV listings.

(Example) When inputting the

Guide Program

number 2 for ZDF.

Download from Www.Somanuals.com. All Manuals Search And Download.

SUBSIDIARY SETTINGS (cont.)

IMPORTANT

Perform the following steps only if —

Tuner Set

— Auto Channel Set has not been set correctly by Auto Set

Up or by Preset Download (੬ pg. 14, 16).

— you have moved to a different area or if a new station

starts broadcasting in your area.

Turn on the TV and select the AV mode.

Your recorder needs to memorize all necessary stations in

channel positions in order to record TV programmes. Auto

Channel Set automatically assigns all receivable stations in your

area to call them up by using the PR buttons without going

through any vacant channels.

Auto Channel Set

A ^{Turn on the recorder.}

Press 1.

B ^{Access the Main Menu screen.}

Press MENU.

C ^{Access the Tuner Set screen.}

HDD/VCR SET UP FUNCTION SET UP INITIAL SET UP

A Press w e to move the

TUNER SET

INITIAL SET

arrow to “INITIAL SET

UP”, then press t or OK.

B Press w e to move the

arrow to “TUNER SET”,

then press OK.

TUNER SET

AUTO CH SET

MANUAL CH SET

INDEX

SELECT WITH

THEN PRESS [OK]

SELECT OK EXIT

D ^{Access the Auto Channel Set screen.}

Press rt to move the

TUNER SET

highlight bar (pointer) to

AUTO CH SET

MANUAL CH SET

“AUTO CH SET”, then press

OK or e.

E ^{Select your country.}

Press rt to move the highlight bar (pointer) to your

country’s name, then press OK or e.

F ^{Select the language.}

Press rt to move the highlight bar (pointer) to the

language of your choice.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT

G ^{Perform Auto Channel Set.}

● In certain reception conditions, station names may not be

stored correctly, and Auto Guide Program Number Set may

not work properly. If the Guide Program numbers are not

set properly when you timer-record a TV programme using

the SHOWVIEW system, the recorder will record a TV

programme of a different station. When programming the

timer using the SHOWVIEW system, be sure to check the

desired channel is selected correctly (੬ pg. 42,

“SHOWVIEW^®Timer Programming”).

Press OK twice.

● You can set up the recorder’s

tuner also by Preset

Download. (੬ pg. 16)

● The Auto Set screen appears,

and remains on screen while

the recorder searches for

receivable stations. As Auto

Channel Set progresses, the

“q” mark on the TV screen

● Your video recorder memorizes all detected stations even if

reception of some of them is poor. You can delete those

stations with an unacceptable picture (੬ pg. 83, “Delete

A Channel”).

moves from left to right. Wait

Beginning

End

until the TV screen as shown

in step H appears.

NOTES:

● Fine tuning is performed automatically during Auto Channel

Set. If you want to perform tuning manually, refer to page 86.

● If you perform Auto Channel Set when the aerial cable is not

connected properly, “SCAN COMPLETED –NO SIGNAL–”

appears on the TV screen in step H. When this happens, make

sure of the aerial connection and press OK; Auto Channel Set

will take place again.

H ^{View the Confirmation screen.}

After “SCAN COMPLETED” is

displayed on the TV screen for

about 5 seconds, the

Confirmation screen looking

like the one to the right

● If no sound accompanies the picture or the audio sounds

unnatural on some channels that have been stored by Auto Set

Up, the TV system setting for those channels may be incorrect.

Select the appropriate TV system for those channels

(੬ pg. 86, “INFORMATION”).

appears. The stations your

recorder located appear on a

Confirmation screen —

channel positions (PR),

channels (CH) and station names (ID – ੬ pg. 87). The

blueback screen and the programme currently being

broadcast by the blinking station appear alternately for 8

seconds each. To view the next page, use the rt w e

button on the remote control.

● The stations located in the selected country appear at the top

of the list.

● The Guide Program numbers will also be set automatically

during Auto Channel Set.

I ^{Return to the normal screen.}

Press MENU.

● Using the Confirmation screen, you can skip or add channel

positions, enter station names and perform other operations.

Refer to pages 82 – 86 for the procedures.

● Depending on reception conditions, the stations may not be

stored in order, and the station names may not be stored

correctly.

● For information on scrambled broadcasts, refer to page 86.

Download from Www.Somanuals.com. All Manuals Search And Download.

SUBSIDIARY SETTINGS (cont.)

Manual Channel Set

Store channels that were not stored during Auto Set Up

(੬ pg. 14), Preset Download (੬ pg. 16) or Auto Channel Set

(੬ pg. 80).

A ^{Access the Main Menu screen.}

Press MENU.

B ^{Access the Tuner Set screen.}

HDD/VCR SET UP FUNCTION SET UP INITIAL SET UP

A Press w e to move the

TUNER SET

INITIAL SET

arrow to “INITIAL SET

UP”, then press t or OK.

B Press w e to move the

arrow to “TUNER SET”,

then press OK.

TUNER SET

AUTO CH SET

MANUAL CH SET

INDEX

SELECT WITH

THEN PRESS [OK]

SELECT OK EXIT

C ^{Access the Confirmation screen.}

Press rt to move the highlight bar (pointer) to

“MANUAL CH SET”, then press OK or e. The

Confirmation screen appears.

D ^{Select the channel position.}

Press rt w e until an open

position in which you want

to store a channel begins

blinking, then press OK. The

Manual Channel Set screen

appears.

● The blueback screen and the

programme currently being

broadcast by the selected

channel appear alternately for

8 seconds each.

(Example) To store in position 12.

E ^{Select the band.}

Press rt to change the band

between CH (regular) and CC

(cable), then press e.

Download from Www.Somanuals.com. All Manuals Search And Download.

Delete A Channel

Perform steps A and C of “Manual Channel Set” on page 82

to access the Confirmation screen before continuing.

F ^{Input the channel.}

Press the number keys to input the channel number you

want to store.

● Input “0” before any single number entries.

● To input the registered station name (ID – ੬ pg. 87), press e

until “– – – –” (ID setting) begins blinking, then press rt.

● For fine tuning adjustment, press e until “+/–” begins blinking,

then press rt. While tuning, “+” or “–” appears.

● When storing a channel that sends scrambled broadcasts,

press e until “OFF” (Decoder setting) blinks, then press rt

to set “DECODER” to “ON” (“OFF” is the default setting).

● When “L-2 SELECT” is set to “A/V” or “SAT”, the “DECODER”

setting cannot be changed (੬ pg. 65).

A ^{Select the item.}

blinking.

Press rt w e until the item you want to delete begins

B ^{Delete a channel.}

Press &.

● The item directly beneath the cancelled one moves up one

line.

G ^{Enter new channel information.}

● Repeat steps A and B as necessary.

Press OK and the Confirmation screen appears.

● Repeat steps D – G as necessary.

C ^{Close the Confirmation screen.}

Press MENU.

H ^{Close the Confirmation screen.}

Press MENU.

● To change positions, see “Change Station Channel Position”

(੬ pg. 84).

● If you wish to set station names other than the ones registered

in your recorder, see “Set Stations (B)” (੬ pg. 85).

ATTENTION

Guide Program numbers are not set when channels are

stored manually. If an attempt is made at timer programming

with the SHOWVIEW system in this state, “SET GUIDE PROG

THEN RETRY” appears on the TV screen; set the Guide

Program Numbers (੬ pg. 79) manually.

Download from Www.Somanuals.com. All Manuals Search And Download.

SUBSIDIARY SETTINGS (cont.)

Change Station Channel Position

Perform steps A and C of “Manual Channel Set” on page 82

to access the Confirmation screen before continuing.

A ^{Select the item.}

Press rt w e until the item you want to move begins

blinking. Then press OK and the station name (ID) and its

channel (CH) number begin blinking.

B ^{Select the new position.}

Press rt w e to move the station to the new channel

position, then press OK.

Example: If you moved the station in position 4 to position 2, the

stations originally in positions 2 and 3 each move

down one space.

● Repeat steps A and B as necessary.

C ^{Close the Confirmation screen.}

Press MENU.

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Stations (A)

Set Stations (B)

Set station names that are registered in your recorder.

Set station names other than the ones registered in your recorder.

Perform steps A and C of “Manual Channel Set” on page 82

to access the Confirmation screen before continuing.

Perform steps A and C of “Manual Channel Set” on page 82

to access the Confirmation screen and then perform steps A

and B of “Set Stations (A)” in the left column before

continuing.

A ^{Select the item.}

Press rt w e until the item you want begins blinking.

A ^{Select the character for station name.}

Press e until the first letter of

the station name begins

blinking.

B ^{Access the Manual Channel Set screen.}

Press OK twice.

C ^{Select the new station.}

Press e until the station

name (ID) begins blinking,

then press rt until the new

station’s name (ID) you want

to store begins blinking.

Registered station names

(੬ pg. 87) appear as you

press rt.

B ^{Enter the new character.}

Press rt to cycle through the characters (A–Z, 0–9, –, f,

+, I (space) ) and stop when the desired character is

indicated, then press e to enter. Enter the remaining

characters the same way (maximum of 4). After entering

all characters, press OK.

● The Confirmation screen appears.

D ^{Switch the stations.}

● If you make a mistake, press w until the incorrect character

begins blinking. Then enter the correct character by pressing

rt.

Press OK.

● The Confirmation screen appears.

● Repeat steps A – D as necessary.

C ^{Close the Confirmation screen.}

E ^{Close the Confirmation screen.}

Press MENU.

NOTE:

The characters available for the station name (ID) are A–Z, 0–9,

–, f, +, I (space) (maximum of 4).

Download from Www.Somanuals.com. All Manuals Search And Download.

SUBSIDIARY SETTINGS (cont.)

When Receiving A Scrambled

Broadcast

A ^{Select the decoder mode.}

Set “L-2 SELECT” to “DECODER” (੬ pg. 65).

B ^{Access the Confirmation screen.}

Perform steps A and C of “Manual Channel Set” on

page 82.

C ^{Select the position.}

Press rt w e to select the channel position

broadcasting scrambled programmes, then press OK

twice.

D ^{Change the decoder setting.}

Press e until “OFF” (decoder setting) begins blinking,

and set it to “ON” by pressing rt.

Fine-Tuning Channels Already Stored

Perform steps A and C of “Manual Channel Set” on page 82

E ^{Return to the Confirmation screen.}

to access the Confirmation screen before continuing.

Press OK.

● Repeat steps C – E as necessary.

A ^{Select the channel to fine-tune.}

Press rt w e until the channel you want to tune begins

F ^{Close the Confirmation screen.}

blinking.

Press MENU.

B ^{Access the Manual Channel Set screen.}

INFORMATION

Press OK twice. The Manual Channel Set screen appears.

If you live in Eastern Europe, “TV SYSTEM” setting appears

instead of “DECODER” setting on the Manual Channel Set

screen. When you can see the picture but can hear no audio,

select appropriate TV system (D/K or B/G). Normally, TV

programmes are broadcasted as follows.

C ^{Perform tuning.}

Press e until “+/–” begins blinking, then press rt until

the picture is its clearest. Then press OK.

● The Confirmation screen appears.

For Eastern Europe : D/K

For Western Europe : B/G

A Select a country in Eastern Europe in step E on page 80.

B Press e until the TV system (D/K or B/G) blinking on the

Manual Channel Set screen in step E on page 82.

C Press rt to select appropriate TV System (D/K or B/G).

● Repeat steps A – C as necessary.

D ^{Close the Confirmation screen.}

Press MENU.

Download from Www.Somanuals.com. All Manuals Search And Download.

TV Station And ID List

ID*

STATION NAME

ID*

STATION NAME

1000

3SAT

ADLT

ANT3

ARD

ARTE

BBC

TV1000

3SAT

ORF3

OWL3

PREM

PRO7

RAI1

RAI2

RAI3

RET4

ORF3

OWL3

PREMIERE

PRO7

ADULT

ANTENA3

ARD

RAI1

ARTE

RAI2

BBC GROUP

BBC1

RAI3

BBC1

BBC2

BR3

RETE4

BBC2

TELE21

RTBF1 or 2

RTL

BAYERN3

CANAL PLUS

PORTUGUSES

CANALE5

KETNET CANVAS

CHANNEL4

CHANNEL5

CHILD

RTBF

RTL

C+

RTL2

RTL4

RTL5

RTP

RTL2

CAN5

CANV

CH4

RTL4

RTL5

RTP

CH5

SCHWEIZ4

SAT1

CHLD

CINE

CLUB

CMT

CNN

CSUR

DISC

SAT1

SBS

CINEMA

TELECLUB

CMT

SBS

SHOW

SIC

SHOW

SOCIEDADE

SKY CHANNEL

SKY NEWS

SPORT

SUPER RTL

STAR-TV

SVT1

CNN

SKY

ANDALUCIA

DISCOVERY

DR TV

SKYN

SPRT

SRTL

STAR

SVT1

SVT2

SWR

TCC

TELE

TEL5

TF1

DRS

DSF

DRS

DSF

ETB1

ETB2

EURO

EUSP

FEMM

FILM

FNET

FR2

ETB1

SVT2

ETB2

SUEDWEST3

TCC

EURONEWS

EUROSPORTS

FEMMAN

FILM

TELE

TELE5

TF1

FILMNET

France2

France3

GALAVISION

HESSEN3

INFO-KANAL

ITALIA1

ITALIA7

ITV

TM3

TMC

TNT

TRT

TM3

TELEMONTECARLO

TNT INT

TRT INT

TSI

FR3

GALA

HR3

TSI

INFO

ITA1

TSR

TV1

BRTN TV1

TV2

ITA7

TV2

ITV

TV3

JSTV

KA2

TV4

KA2

TV5

KAB1

KAN2

LOCA

KABEL1

KANAL2

LOCAL

TV6

TVE1

TVE2

TVG

TVI

TVE1

TVE2

TV GALICIA

TV INDEPENDENT

TV NORGE

VIDEO

VERONICA

VH-1

MBC

MCM

MDR

MOVE

MTV

MTV3

N-TV

NBC

NDR3

NED1

NED2

NED3

NEWS

NICK

NRK

MBR

MCM

TVN

VCR

VERO

VH-1

VIVA

VIV2

VMTV

VOX

VT4

VTM

WDR1

WDR3

YLE1

YLE2

ZDF

ZTV

MDR

MOVIE

MTV

MTV3

VIVA

VIVA2

NORD3

N-TV

VIDEO MUSIC

VOX

NBC SUPER

NDR

VT4

NED1

VTM

NED2

West1

NED3

West3

YLE1

NICKELODEON

NRK

YLE2

ZDF

NRK2

ODE

ORF1

ORF2

NRK2

ZTV

ODEON

ORF1

* The “ID” abbreviation is what is shown on-screen in lieu of the

station name. The “ID” abbreviation is listed in the

Confirmation screen and is displayed on the TV screen when

the recorder is tuned to a different station.

ORF2

Download from Www.Somanuals.com. All Manuals Search And Download.

SUBSIDIARY SETTINGS (cont.)

IMPORTANT

If you performed Auto Set Up (੬ pg. 14), Preset Download

(੬ pg. 16) or Auto Channel Set (੬ pg. 80), without ever

having set the clock previously, the recorder’s built-in clock is

also set automatically.

Clock Set

Perform the following steps only if —

—Auto Clock Set has not been performed correctly by Auto

Set Up, Preset Download or Auto Channel Set.

Turn on the TV and select the AV mode.

—the recorder’s memory backup has expired.

—you want to change Just Clock setting (੬ “Just Clock” in

the left column).

A ^{Turn on the recorder.}

Press 1.

B ^{Access the Main Menu screen.}

Press MENU.

C ^{Access the Initial Set screen.}

HDD/VCR SET UP FUNCTION SET UP INITIAL SET UP

A Press w e to move the

TUNER SET

INITIAL SET

arrow to “INITIAL SET

UP”, then press t or OK.

B Press w e to move the

arrow to “INITIAL SET”,

then press OK.

INITIAL SET

CLOCK SET

GUIDE PROG SET

SAT CONTROL SET

INDEX

SELECT WITH

THEN PRESS [OK]

SELECT OK EXIT

D ^{Access the Clock Set screen.}

Press rt to move the highlight bar (pointer) to “CLOCK

SET”, then press OK or e. The Clock Set screen appears.

Just Clock

The Just Clock function provides accurate time keeping

through automatic adjustments at regular intervals, by

reading data from a PDC signal.

The Just Clock option can be set “ON” or “OFF” at the Clock

Set screen (the default setting is “OFF”). Press OK until the

Just Clock setting begins blinking, then press rt to change

the setting.

IMPORTANT: If you turn off Just Clock, the accuracy of your

recorder’s built-in clock may be reduced, which could

adversely effect timer recording. We recommend you to keep

Just Clock on. In cases where the clock setting data from a

PDC signal is incorrect, however, you are advised to keep

Just Clock set to “OFF”.

NOTE:

When you have selected MAGYARORSZÁG (36), CESKÁ

REPUBLIKA (42), POLSKA (48), or OTHER EASTERN EUROPE

(EE) for the country setting (੬ pg. 14, 18), you cannot use Just

Clock function. Skip steps F and G on page 89.

Download from Www.Somanuals.com. All Manuals Search And Download.

NOTES:

E ^{Set the date and time.}

● Just Clock (when set to “ON”) adjusts the recorder’s built-in

clock every hour, except for 23:00, 0:00, 1:00 and 2:00.

● Just Clock is not effective when ...

Press rt to set the time, then press OK or e. The

“DATE” display begins blinking. Repeat the same

procedure to set the date and year.

... the recorder’s power is on.

... the recorder is in the Timer mode.

... a difference of more than 3 minutes exists between the

built-in clock’s time and the actual time.

... the recorder is in the Automatic Satellite Programme

Recording mode (੬ pg. 47).

● When you set the time, press and hold rt to change the time

by 30 minutes.

● When you set the date, press and hold rt to change the date

by 15 days.

... “L-2 SELECT” is set to “SAT” (੬ pg. 65).

● If Just Clock is set to “ON”, the recorder’s clock is

automatically adjusted at the start/end of Summer Time.

● Just Clock may not function properly depending on the

reception condition.

F ^{Set Just Clock.}

The default setting is “OFF”. Set as desired by pressing

rt, then press OK or e.

● For the Just clock function, refer to “Just Clock” on page 88.

● If you set to “OFF”, you can disregard the next step as you

won’t be able to receive regular clock adjustments.

Set the source channel position for clock

data.

The recorder is preset to receive clock setting and

adjustment data from channel position 1.

Press rt to set the channel position to the number

representing the station transmitting clock setting data,

then press OK or e.

H ^{Start the clock operation.}

Press MENU.

Download from Www.Somanuals.com. All Manuals Search And Download.

TROUBLESHOOTING

Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are

often easily corrected, and this can save you the trouble of sending your video recorder off for repair.

POWER

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

1. No power is supplied to the

recorder.

● The mains power cord is

disconnected.

Connect the mains power cord.

2. The clock is functioning properly, ● “#” is displayed on the front

Press the # button to turn the “#”

but the recorder cannot be

powered.

display panel with “AUTO TIMER” indicator off.

set to “OFF”.

3. The remote control won’t function. ● The batteries are discharged.

Replace the dead batteries with new

ones.

TAPE TRANSPORT

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

1. The tape does not run during

recording.

● “i” is displayed on the front display Press 4 to turn the “i” indicator off.

panel.

2. The tape will not rewind or

fast-forward.

● The tape is already fully rewound or Check the cassette.

fast-forwarded.

PLAYBACK

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

1. The playback picture does not

appear while the tape is running.

● The TV receiver is not set to the AV Set the TV to its AV mode.

mode.

2. Noise appears during visual

search.

● This is normal.

3. Noise appears during normal

playback.

● The automatic tracking mode is

engaged.

Try manual tracking. (੬ pg. 36)

4. The playback picture is blurred or ● The video heads may be dirty.

interrupted while TV broadcasts

are clear or “USE CLEANING

Use a dry cleaning cassette TCL-2UX

or consult your JVC dealer.

CASSETTE” message appears on

the screen.

5. Breaks are noticeable in Hi-Fi

soundtrack.

● The automatic tracking mode is

engaged.

Try manual tracking. (੬ pg. 36)

Download from Www.Somanuals.com. All Manuals Search And Download.

RECORDING

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

1. Recording cannot be started.

● There is no cassette loaded, or the

cassette loaded has had its record

safety tab removed.

Insert a cassette, or using adhesive

tape, cover the hole where the tab

was removed.

2. TV broadcasts cannot be

recorded.

● “L-1”, “L-2”, “F-1”, “DUB“ or

“SAT” has been selected as the

input mode.

Set to the desired channel.

Confirm that the source is properly

connected.

3. Tape-to-tape editing is not

possible.

● The source (another video recorder,

camcorder) has not been properly

connected.

● All necessary power switches have Confirm that all units’ power switches

not been turned on.

are turned on.

● The input mode is not correct.

Set the input mode to “L-1”, “L-2” or

“F-1”.

Confirm that the camcorder is properly

connected.

4. Camcorder recording is not

possible.

● The camcorder has not been

properly connected.

● The input mode is not correct.

Set the input mode to “L-1”, “L-2” or

“F-1”.

Download from Www.Somanuals.com. All Manuals Search And Download.

TROUBLESHOOTING (cont.)

TIMER RECORDING

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

1. Timer recording won’t work.

● The clock and/or the timer have

been set incorrectly.

Re-perform the clock and/or timer

settings.

● The timer is not engaged.

Press # and confirm that “#” is

displayed on the front display panel.

2. Timer programming is not

possible.

● Timer recording is in progress.

Timer programming can’t be

performed while a timer recording is

in progress. Wait until it finishes.

3. “#” and “[” on the front display ● The timer is engaged but there’s no Load a cassette with the record safety

panel won’t stop blinking.

cassette loaded.

tab intact, or cover the hole using

adhesive tape.

● The loaded cassette has had its

record safety tab removed.

Remove the cassette and cover the

hole with adhesive tape, or insert a

cassette with the record safety tab

intact.

● The end of the tape was reached

during timer recording.

The programme may not have been

recorded in its entirety. Next time

make sure you have enough time on

the tape to record the entire

programme.

4. “#” blinks for 10 seconds and the ● # has been pressed when there are Check the programmed data and re-

Timer mode is disengaged.

no programs in memory.

program as necessary, then press #

again.

5. The SHOWVIEW system does not

timer-record properly.

● The recorder’s channel positions

have been set incorrectly.

Refer to “Guide Program Number

Set” (੬ pg. 79) and re-perform the

procedure.

Download from Www.Somanuals.com. All Manuals Search And Download.