JVC Car Stereo System GET0260 003B User Manual

CD RECEIVER

RECEPTEUR CD

KD-G312/KD-G311

For canceling the display demonstration, see page 7.

Pour annuler la démonstration des affichages, référez-vous à la page 7.

For installation and connections, refer to the separate manual.

Pour l’installation et les raccordements, se référer au manuel séparé.

INSTRUCTIONS

MANUEL D’INSTRUCTIONS

GET0260-003B

[EX/EU]

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

How to reset your unit ...........................

How to forcibly eject a disc...................

How to read this manual........................

How to use the MODE button...............

Sound adjustments ................18

Selecting preset sound modes

(C-EQ: custom equalizer) .................. 18

Adjusting the sound............................... 19

Control panel

General settings — PSM .........20

— KD-G312/KD-G311 ............... 5

Basic procedure ..................................... 20

Parts identification.................................

Detaching the control

Getting started....................... 6

panel ..................................22

Basic operations...........................

Canceling the display demonstrations...

Setting the clock ....................................

Using the remote controller

— RM-RK60............................23

Main elements and features................... 23

Radio operations ................... 8

Listening to the radio...........................

Storing stations in memory....................

Maintenance..........................24

More about this receiver ........25

Troubleshooting.....................27

Specifications.........................29

Listening to a preset station................... 10

FM RDS operations.................11

Searching for your favorite FM RDS

programme....................................... 11

Storing your favorite programmes......... 12

Using the standby receptions................. 12

Tracking the same programme

—Network-Tracking Reception ........ 13

Disc operations ......................14

Playing a disc ..................................... 14

Changing the display information ......... 16

Selecting the playback modes................ 17

*For safety....

• Do not raise the volume level too much, as

this will block outside sounds, making driving

dangerous.

• Stop the car before performing any

complicated operations.

*Temperature inside the car....

If you have parked the car for a long time in

hot or cold weather, wait until the temperature

in the car becomes normal before operating the

unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to read this manual

How to use the MODE button

The following methods are used to make the

explanations simple and easy-to-understand:

• Some related tips and notes are explained in

“More about this receiver” (see page 25).

• The control panel illustrations used for

explanation in this manual is KD-G311.

• Button operations are mainly explained with

the illustrations as follows:

If you press MODE, the receiver goes into

functions mode, then the number buttons and

¢/4

buttons work as different

function buttons.

Ex.: When number button 2 works as

MO (monaural) button.

Press briefly.

Press repeatedly.

Press either one.

Time countdown indicator

To use these buttons for original functions

again after pressing MODE, wait for

5 seconds without pressing any of these buttons

until the functions mode is cleared.

• Pressing MODE again also clears the

functions mode.

Press and hold until

your desired response

begins.

Press and hold both

buttons at the same

time.

Download from Www.Somanuals.com. All Manuals Search And Download.

Control panel — KD-G312/KD-G311

Parts identification

Display window

1 +/– buttons

(control panel release) button

2 DISP (display) button

3 Loading slot

; Number buttons

4 Display window

5 MODE button

6 0 (eject) button

Display window

a Tunerreceptionindicators—MO(monaural),

ST (stereo)

¢/4

buttons

s WMA indicator

d RDS indicators—TP, PTY, AF, REG

f MP3 indicator

g CD indicator

h Playback mode / item indicators—

RND (random),

RPT (repeat)

j LOUD (loudness) indicator

k EQ (equalizer) indicator

l Sound mode (C-EQ: custom equalizer)

indicators—ROCK, CLASSIC, POPS,

HIP HOP, JAZZ, USER

(standby/on/attenuator) button

9 SEL (select) button

p Remote sensor

• You can control this receiver with an

optionally purchased remote controller.

• DO NOT expose the remote sensor to

strong light (direct sunlight or artificial

lighting).

(disc),

(folder),

q EQ (equalizer) button

w MO (monaural) button

e SSM (Strong-station Sequential Memory)

button

r CD button

t FM/AM button

•

also works as the time countdown

indicator.

/ Disc information indicators—TAG (ID3

Tag), (folder), (track/file)

y RPT (repeat) button

u RND (random) button

i T/P (traffic programme/programme type)

button

z Main display

x Source display / Volume level indicator

c Tr (track) indicator

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting started

Basic operations

To drop the volume in a moment (ATT)

To restore the sound, press it

again.

To turn off the power

You cannot select “CD” as the playback

source if there is no disc in the loading

slot.

Caution on volume setting:

Discs produce very little noise compared

with other sources. Lower the volume

before playing a disc to avoid damaging

the speakers by the sudden increase of the

output level.

Volume level appears.

Volume level indicator

⁄

Adjust the sound as you want.

(See pages 18 and 19.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Canceling the display

demonstrations

If no operations are done for about 20 seconds,

display demonstration starts.

Setting the clock

[Initial: DEMO ON]—see page 20.

2 Set the hour, minute, and clock

system.

1 Select “CLOCK H” (hour), then

adjust the hour.

2 Select “CLOCK M” (minute),

then adjust the minute.

3 Select “24H/12H,” then select

“24H” (hour) or “12H” (hour).

3 Finish the procedure.

To check the current clock time when the

power is turned off

4 Finish the procedure.

To activate the display demonstration

In step 3 above...

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio operations

Listening to the radio

To tune in to a station manually

In step Ÿ on the left...

Lights up when receiving an FM stereo

broadcast with sufficient signal strength.

Selected band appears.

Start searching for a station.

2 Select the desired station frequencies.

When a station is received, searching

stops.

To stop searching, press the same

button again.

Download from Www.Somanuals.com. All Manuals Search And Download.

When an FM stereo broadcast is hard to

receive

Storing stations in memory

You can preset six stations for each band.

FM station automatic presetting—

SSM (Strong-station Sequential

Memory)

1 Select the FM band (FM1 – FM3)

you want to store into.

Lights up when monaural mode is activated.

Reception improves, but stereo effect will

be lost.

To restore the stereo effect, repeat the same

procedure so that the MO indicator goes off.

“SSM” flashes, then disappears when

automatic presetting is over.

Local FM stations with the strongest signals are

searched and stored automatically in the FM

band.

Download from Www.Somanuals.com. All Manuals Search And Download.

Manual presetting

Ex.:Storing FM station of 92.5 MHz into the

preset number 4 of the FM1 band.

Listening to a preset station

2 Select the preset station (1 – 6) you

want.

To check the current clock time while

listening to an FM (non-RDS) or AM station

• For FM RDS stations, see page 13.

Preset number flashes for a while.

Download from Www.Somanuals.com. All Manuals Search And Download.

FM RDS operations

Searching for your favorite FM RDS programme

You can tune in to a station broadcasting your

favorite programme by searching for a PTY code.

Start searching for your favorite

programme.

•

To store your favourite programme, see page

12.

If there is a station broadcasting a

programme of the same PTY code as

you have selected, that station is tuned

in.

The last selected PTY code appears.

Select one of your favorite

programme type.

PTY codes

NEWS, AFFAIRS, INFO, SPORT,

EDUCATE, DRAMA, CULTURE,

SCIENCE, VARIED, POP M (music),

ROCK M (music), EASY M (music),

LIGHT M (music), CLASSICS,

OTHER M (music), WEATHER,

FINANCE, CHILDREN, SOCIAL,

RELIGION, PHONE IN, TRAVEL,

LEISURE, JAZZ, COUNTRY,

Select one of the twenty-nine PTY

codes.

NATION M (music), OLDIES,

FOLK M (music), DOCUMENT

Ex.: When “ROCK M” is selected

Download from Www.Somanuals.com. All Manuals Search And Download.

3 Repeat steps 1 and 2 to store

other PTY codes into other preset

numbers.

What you can do with RDS

RDS (Radio Data System) allows FM

stations to send an additional signal along

with their regular programme signals.

By receiving the RDS data, this receiver can

do the following:

4 Finish the procedure.

•

Programme Type (PTY) Search (see page 11)

• Temporarily switches to Traffic

Announcement—TA Standby Reception

(see the right column)

•

Temporarily switches to your favorite

programme—PTY Standby Reception (see

pages 13 and 21)

Using the standby receptions

•

Tracing the same programme automatically

—Network-Tracking Reception (see page 13)

TA Standby Reception

TA Standby Reception allows the receiver to

switch temporarily to Traffic Announcement

(TA) from any source other than AM.

The volume changes to the preset TA volume

level (see page 21).

• Programme Search (see page 21)

Storing your favorite programmes

You can store six favorite programme types.

To activate TA Standby Reception

The TP indicator either

lights up or flashes.

Preset programme types in the number buttons

(1 to 6):

• If the TP indicator lights up, TA Standby

Reception is activated.

• If the TP indicator flashes, TA Standby

Reception is not yet activated. (This occurs

when you are listening to an FM station

without the RDS signals required for TA

Standby Reception.)

1 Select a PTY code (see page 11).

2 Select the preset number (1 – 6) you

want to store into.

To activate TA Standby Reception, tune in to

another station providing these signals. The

TP indicator will stop flashing and remain lit.

To deactivate the TA Standby Reception

The TP indicator goes off.

Ex.: When “ROCK M” is selected

Download from Www.Somanuals.com. All Manuals Search And Download.

PTY Standby Reception

PTY Standby Reception allows the receiver

to switch temporarily to your favorite PTY

programme from any source other than AM.

Tracking the same programme—

Network-Tracking Reception

When driving in an area where FM reception

is not sufficient enough, this receiver

automatically tunes in to another FM RDS

station of the same network, possibly

broadcasting the same programme with stronger

signals (see the illustration below).

To activate and select your favorite PTY

code for PTY Standby Reception, see page

21.

The PTY indicator either lights up or flashes.

When shipped from the factory, Network-

Tracking Reception is activated.

• If the PTY indicator lights up, PTY Standby

Reception is activated.

To change the Network-Tracking Reception

setting, see page 21.

• If the PTY indicator flashes, PTY Standby

Reception is not yet activated.

To activate PTY Standby Reception, tune in

to another station providing these signals. The

PTY indicator will stop flashing and remain

lit.

Programme A broadcasting on different

frequency areas (01 – 05)

To deactivate the PTY Standby Reception,

select “OFF” for the PTY code (see page 21).

The PTY indicator goes off.

To check the current clock time while

listening to an FM RDS station

Download from Www.Somanuals.com. All Manuals Search And Download.

Disc operations

Playing a disc

All tracks will be played

repeatedly until you change

the source or eject the disc.

• When inserting an audio CD or a CD Text

disc:

About MP3 and WMA discs

MP3 and WMA (Windows Media^®Audio)

“tracks” (words “file” and “track” are used

interchangeably) are recorded in “folders.”

Total playing time of Total track number

the inserted disc

of the inserted disc

• When inserting an MP3 or a WMA disc:

CD Text: Disc title/performer =

Track title appears automatically

(see page 16).

Total folder

number

Total file

number

Elapsed playing Current track

time

number

Disc information appears

automatically (see page 16).

To stop play and eject the disc

Selected folder number

Elapsed

playing time

Current track

number

* Either the MP3 or WMA indicator lights up

depending on the detected file.

Download from Www.Somanuals.com. All Manuals Search And Download.

To fast-forward or reverse the track

To locate a particular track (for CD) or

folder (for MP3 or WMA discs) directly

To select a number from 01 – 06:

Fast-forwards.

Reverses.

To select a number from 07 – 12:

To go to the next or previous tracks

To the following tracks.

• To use folder search on MP3/WMA discs, it

is required that folders are assigned with

2-digit numbers at the beginning of their

folder names—01, 02, 03, and so on.

To the beginning of the current track, then

the previous tracks.

• To select a particular track in a folder

(for MP3 or WMA disc) after selecting a

folder:

To go to the next or previous folders

(only for MP3 or WMA discs)

Prohibiting disc ejection

You can lock a disc in the loading slot.

To next folders.

To previous folders.

To cancel the prohibition, repeat the same

procedure.

Download from Www.Somanuals.com. All Manuals Search And Download.

Changing the display information

While playing an audio CD or a CD Text

*¹If the current disc is an audio CD, “NO NAME” appears.

While playing an MP3 or WMA disc

• When “TAG DISP” is set to “TAG ON” (see page 21)

*²If an MP3/WMA file does not have ID3 tags, folder name and file name appear. In this

case, the TAG indicator will not light up.

• When “TAG DISP” is set to “TAG OFF”

Download from Www.Somanuals.com. All Manuals Search And Download.

Selecting the playback modes

You can use only one of the following playback modes at a time.

2 Select your desired playback mode.

Repeat play

Mode

Plays repeatedly

TRK RPT:

The current track.

• RPT lights up.

FLDR RPT*: All tracks of the current folder.

and RPT light up.

•

RPT OFF:

Cancels.

Ex.: When “TRK RPT” is selected while

playing an MP3 disc

Random play

Mode

Plays at random

FLDR RND*: All tracks of the current folder,

then tracks of the next folder

and so on.

• RND and

light up.

DISC RND: All tracks of the current disc.

• RND and

Cancels.

light up.

RND OFF:

Ex.: When “DISC RND” is selected while

playing an MP3 disc

*Only while playing an MP3 or WMA disc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Sound adjustments

Selecting preset sound modes (C-EQ: custom equalizer)

You can select a preset sound mode suitable to

the music genre.

Preset values

Indication

For:

BAS TRE LOUD

00 00 OFF

USER

ROCK

(Flat sound)

+03 +01 ON

+01 –02 OFF

+04 +01 OFF

Rock or

disco music

CLASSIC

Classical

music

POPS

Light music

HIP HOP

+02

Funk or rap

music

JAZZ

+02 +03 OFF

Jazz music

*¹BAS: Bass

*²TRE: Treble

*³LOUD: Loudness

Ex.: When “ROCK” is selected

Indication pattern for each sound mode:

Download from Www.Somanuals.com. All Manuals Search And Download.

Indication

BAS*¹

(bass)

To do:

Range

Adjusting the sound

You can adjust the sound characteristics to your

preference.

Adjust the bass.

–06 (min.)

+06 (max.)

TRE*¹

(treble)

Adjust the treble.

–06 (min.)

+06 (max.)

FAD*²

(fader)

Adjust the front

and rear speaker

balance.

R06 (Rear

only)

F06 (Front

only)

BAL

Adjust the left

L06 (Left

only)

Ex.: When “TRE” is selected

(balance) and right speaker

balance.

R06 (Right

only)

LOUD*¹

(loudness) high frequencies

Boost low and

LOUD ON

Indication pattern changes as

you adjust the level.

to produce a well- LOUD OFF

balanced sound at

low volume level.

VOL*³

Adjust the volume. 00 (min.) to

(volume)

30 or 50

(max.)*⁴

*¹When you adjust the bass, treble, or

loudness, the adjustment you have made is

stored for the currently selected sound mode

(C-EQ) including “USER.”

*²If you are using a two-speaker system, set

the fader level to “00.”

*³Normally the +/– buttons work as the volume

control. So you do not have to select “VOL”

to adjust the volume level.

*⁴Depending on the amplifier gain control

setting. (See page 21 for details.)

Download from Www.Somanuals.com. All Manuals Search And Download.

General settings — PSM

3 Adjust the PSM item selected.

Basic procedure

You can change PSM (Preferred Setting Mode)

items listed in the table that follows.

4 Repeat steps 2 and 3 to adjust the

other PSM items if necessary.

5 Finish the procedure.

2 Select a PSM item.

Ex.: When you select “DIMMER”

Indications

Selectable settings, [reference page]

DEMO

Display demonstration

DEMO ON: [Initial]; Display demonstration will be activated

automatically if no operation is done for about

20 seconds, [7].

DEMO OFF: Cancels.

0 – 23 (1 – 12), [7]

CLOCK H

[Initial: 0 (0:00)]

Hour adjustment

00 – 59, [7]

CLOCK M

[Initial: 00 (0:00)]

Minute adjustment

12H O 24H, [7]

[Initial: 24H]

24H/12H

24 hours or 12 hours time

display

CLK ADJ

AUTO: [Initial]; The built-in clock is automatically adjusted

Clock adjustment

using the CT (clock time) data in the RDS signal.

OFF:

Cancels.

Download from Www.Somanuals.com. All Manuals Search And Download.

Indications

Selectable settings, [reference page]

AF-REG

When the received signals from the current station become weak...

Alternative frequency/

regionalization reception

AF:

[Initial]; Switches to another station (the programme

may differ from the one currently received), [13].

• The AF indicator lights up.

AF REG: Switches to another station broadcasting the same

programme.

• The AF and REG indicators light up.

OFF:

Cancels.

PTY-STBY

PTY standby

Activates PTY Standby Reception with one of the 29 PTY codes,

[13].

OFF [Initial]

29 PTY codes, [11]

(back to the beginning)

TA VOL

[Initial: VOL 20]; VOL 00 – VOL 30 or 50*, [12]

Traffic announcement

volume

* Depends on the amplifier gain control.

P-SEARCH

Programme search

ON:

Using the AF data, the receiver tunes in to another

frequency broadcasting the same programme as the

original preset RDS station is if the preset station

signals are not sufficient.

OFF:

[Initial]; Cancels.

DIMMER

ON:

Activates dimmer.

Dimmer

OFF:

[Initial]; Cancels.

TEL

MUTING 1/MUTING 2: Select either one which mutes the

Telephone muting

sounds while using the cellular phone.

OFF:

[Initial]; Cancels.

SCROLL*

ONCE: [Initial]; Scrolls the disc information once.

Scroll

AUTO: Repeats scrolling (5-second intervals in between).

OFF:

Cancels.

• Pressing DISP for more than one second can scroll the display

regardless of the setting.

TAG DISP

TAG ON:

[Initial]; Shows the ID3 tag while playing

Tag display

MP3/WMA tracks, [16].

TAG OFF: Cancels.

AMP GAIN

Amplifier gain control

You can change the maximum volume level of this receiver.

LOW PWR: VOL 00 – VOL 30 (Select this if the maximum

power of the speaker is less than 50 W to prevent

them from damaging the speaker.)

HIGH PWR: [Initial]; VOL 00 – VOL 50

* Some characters or symbols will not be shown (and will be blanked) on the display.

(Ex. “ABCå!d#” ]“ABCA D ”.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Detaching the control panel

When detaching or attaching the control panel,

Attaching the control panel

be careful not to damage the connectors on

the back of the control panel and on the panel

holder.

Detaching the control panel

Before detaching the control panel, be sure to

turn off the power.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the remote controller — RM-RK60

This receiver can be remotely controlled as

instructed here (with an optionally purchased

Main elements and features

remote controller). We recommend that you use

remote controller RM-RK60 with your receiver.

• When operating, aim the remote controller

directly at the remote sensor on the

receiver. Make sure there is no obstacle in

between.

Installing the lithium coin battery

(CR2025)

(standby/on attenuator) button

• Turns on and off the power and also

attenuates the sound.

2 SRC (source) button

Warning:

• Selects the source.

3 R (reverse) / F (forward) buttons

• Searches for stations if pressed briefly.

• Fast-forwards or reverses the track if

pressed and held.

• Changes the tracks of the disc.

4 SOUND button

• Store the battery in a place where children

cannot reach to avoid risk of accident.

• To prevent the battery from over-heating,

cracking, or starting a fire:

– Do not recharge, short, disassemble, or

heat the battery or dispose of it in a fire.

– Do not leave the battery with other

metallic materials.

– Do not poke the battery with tweezers or

similar tools.

– Wrap the battery with tape and insulate

when throwing away or saving it.

• Selects the sound mode (C-EQ: custom

equalizer).

5 U (up) / D (down) buttons

• U (up): Changes the FM/AM bands.

• D (down): Changes the preset stations.

• Changes the folder of the MP3/WMA

discs.

6 VOLUME +/– buttons

• Adjusts the volume level.

Caution:

The receiver is equipped with the steering

wheel remote control function.

• See the Installation/Connection Manual

(separate volume) for connection.

Download from Www.Somanuals.com. All Manuals Search And Download.

Maintenance

How to clean the connectors

To keep discs clean

Frequent detachment will deteriorate the

connectors.

A dirty disc may not play correctly.

If a disc does become dirty, wipe

it with a soft cloth in a straight line

from center to edge.

To minimize this possibility, periodically wipe

the connectors with a cotton swab or cloth

moistened with alcohol, being careful not to

damage the connectors.

• Do not use any solvent (for

example, conventional record cleaner, spray,

thinner, benzine, etc.) to clean discs.

To play new discs

New discs may have some rough

spots around the inner and outer

edges. If such a disc is used, this

receiver may reject the disc.

Connector

To remove these rough spots, rub the edges

with a pencil or ball-point pen, etc.

Moisture condensation

Moisture may condense on the lens inside the

CD player in the following cases:

• After starting the heater in the car.

• If it becomes very humid inside the car.

Should this occur, the CD player may

malfunction. In this case, eject the disc and

leave the receiver turned on for a few hours

until the moisture evaporates.

How to handle discs

When removing a disc from

its case, press down the center

holder of the case and lift the

disc out, holding it by the

edges.

Center holder

• Always hold the disc by the edges. Do not

touch its recording surface.

When storing a disc into its case, gently insert

the disc around the center holder (with the

printed surface facing up).

• Make sure to store discs into the cases after

use.

Do not use the following discs:

Stick-on

Sticker

Warped

label

residue

Disc

disc

Download from Www.Somanuals.com. All Manuals Search And Download.

More about this receiver

General

Basic operations

• This receiver has been designed to reproduce

CDs/CD Texts, and CD-Rs (Recordable)/

CD-RWs (Rewritable) in audio CD (CD-DA),

MP3 and WMA format.

Turning on the power

• By pressing CD or FM/AM on the receiver,

you can also turn on the power.

• When a disc has been loaded, selecting “CD”

for the playback source starts disc play.

Turning off the power

• If you turn off the power while listening to a

disc, disc play will start from where playback

has been stopped previously, next time you

turn on the power.

Inserting a disc

• When a disc is inserted upside down, the disc

automatically ejects.

• Do not insert 8 cm discs (single CD) and

unusual shape discs (heart, flower, etc.) into

the loading slot.

Tuner operations

Storing stations in memory

• During SSM search...

– All previously stored stations are erased and

stations are stored newly.

– Received stations are preset in No. 1 (lowest

frequency) to No. 6 (highest frequency).

– When SSM is over, the station stored in

No. 1 will be automatically tuned in.

• When storing a station manually, a previously

preset station is erased when a new station is

stored in the same preset number.

Playing a disc

• While fast-forwarding or reversing on an MP3

or WMA disc, you can only hear intermittent

sounds.

Playing a CD-R or CD-RW

• Use only “finalized” CD-Rs or CD-RWs.

• This receiver can play back only the files of

the same type which is first detected if a disc

includes both audio CD (CD-DA) files and

MP3/WMA files.

• This receiver can play back multi-session

discs; however, unclosed sessions will be

skipped while playing.

• Some CD-Rs or CD-RWs may not play

back on this receiver because of their disc

characteristics, and for the following causes:

– Discs are dirty or scratched.

– Moisture condensation occurs on the lens

inside the receiver.

FM RDS operations

• Network-Tracking Reception requires two

types of RDS signals—PI (Programme

Identification) and AF (Alternative

Frequency) to work correctly. Without

receiving these data correctly, Network-

Tracking Reception will not operate.

• If a Traffic Announcement is received, the

volume level (TA Volume) automatically

changes to the preset level.

– The pickup lens inside the receiver is dirty.

– CD-R/CD-RW on which the files are

written with “Packet Write” method.

– There are improper recording conditions

(missing data, etc.) or media conditions

(stain, scratch, warp, etc.).

• CD-RWs may require a longer readout time

since the reflectance of CD-RWs is lower

than that of regular CDs.

Disc operations

Caution for DualDisc playback

• The Non-DVD side of a “DualDisc” does

not comply with the “Compact Disc Digital

Audio” standard. Therefore, the use of Non-

DVD side of a DualDisc on this product may

not be recommended.

To be continued....

Download from Www.Somanuals.com. All Manuals Search And Download.

• Do not use the following CD-Rs or CD-RWs:

– Discs with stickers, labels, or protective seal

stuck to the surface.

– Discs on which labels can be directly

printed by an ink jet printer.

Using these discs under high temperatures or

high humidities may cause malfunctions or

damages to discs.

• This receiver can play back the files recorded

in VBR (variable bit rate).

The files recorded in VBR have a discrepancy

in elapsed time display, and do not show

the actual elapsed time. Especially, after

performing the search function, this difference

becomes noticeable.

• This receiver cannot play back the following

files:

– MP3 files encoded with MP3i and MP3

PRO format.

– MP3 files encoded in an unappropriated

format.

– MP3 files encoded with Layer 1/2.

– WMA files encoded with lossless,

professional, and voice format.

– WMA files which are not based upon

Windows Media^®Audio.

– WMA files copy-protected with DRM.

– Files which have the data such as WAVE,

ATRAC3, etc.

Playing an MP3/WMA disc

• This receiver can play back MP3/WMA files

with the extension code <.mp3> or <.wma>

(regardless of the letter case—upper/lower).

• This receiver can show the names of albums,

artists (performer), and ID3 Tag (Version 1.0,

1.1, 2.2, 2.3, or 2.4) for MP3 files and for

WMA files.

• This receiver can handle only one-byte

characters. No other characters can be

correctly displayed.

• This receiver can play back MP3/WMA files

meeting the conditions below:

– Bit rate: 8 kbps — 320 kbps

• The search function works but search speed is

not constant.

– Sampling frequency:

Changing the source

• If you change the source, playback also stops

(without ejecting the disc).

Next time you select “CD” for the playback

source, disc play starts from where it has been

stopped previously.

48 kHz, 44.1 kHz, 32 kHz (for MPEG-1)

24 kHz, 22.05 kHz, 16 kHz (for MPEG-2)

– Disc format: ISO 9660 Level 1/ Level 2,

Romeo, Joliet, Windows long file name

• The maximum number of characters for file/

folder names vary among the disc format used

(includes 4 extension characters—<.mp3> or

<.wma>).

– ISO 9660 Level 1: up to 12 characters

– ISO 9660 Level 2: up to 31 characters

– Romeo*: up to 128 (72) characters

– Joliet*: up to 64 (36) characters

– Windows long file name*: up to 128 (72)

characters

* The parenthetic figure is the maximum

number of characters for file/folder names

in case the total number of files and folders

is 313 or more.

• This receiver can recognize the total of 512

files, of 200 folders, and of 8 hierarchies.

Ejecting a disc

• If the ejected disc is not removed within

15 seconds, the disc is automatically inserted

again into the loading slot to prevent it from

dust. (Disc will not play this time.)

General settings—PSM

• If you change the “AMP GAIN” setting from

“HIGH PWR” to “LOW PWR” while the

volume level is set higher than “VOL 30,” the

receiver automatically changes the volume

level to “VOL 30.”

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service

center.

Symptoms

Causes

Remedies

The volume level is set to

the minimum level.

• Sound cannot be heard

from the speakers.

Adjust it to the optimum

level.

Connections are incorrect.

Check the cords and

connections.

The built-in microcomputer

may have functioned

• The receiver does not

work at all.

Reset the receiver (see page

2).

incorrectly due to noise, etc.

Signals are too weak.

• SSM automatic presetting

does not work.

Store stations manually.

Connect the aerial firmly.

Insert the disc correctly.

The aerial is not connected

firmly.

• Static noise while listening

to the radio.

Disc is inserted upside

down.

• Disc automatically ejects.

CD-R/CD-RW is not

finalized.

• CD-R/CD-RW cannot be

played back.

• Insert a finalized CD-R/

CD-RW.

• Tracks on the CD-R/

CD-RW cannot be

skipped.

• Finalize the CD-R/

CD-RW with the

component which you

used for recording.

Disc is locked.

• Disc can be neither played

back nor ejected.

Unlock the disc (see page

15).

The CD player may have

functioned incorrectly.

Eject the disc forcibly (see

page 2).

You are driving on rough

roads.

• Disc sound is sometimes

interrupted.

Stop playback while driving

on rough roads.

Disc is scratched.

Change the disc.

Connections are incorrect.

Check the cords and

connections.

• “NO DISC” appears on the No disc is in the loading

Insert a disc into the loading

slot.

display.

slot.

Disc is inserted incorrectly.

Insert the disc correctly.

Download from Www.Somanuals.com. All Manuals Search And Download.

Symptoms

Causes

Remedies

No MP3/WMA tracks are

recorded on the disc.

Change the disc.

• Disc cannot be played

back.

MP3/WMA tracks do not

have the extension code

<.mp3> or <.wma> in their

file names.

Add the extension code

<.mp3> or <.wma> to their

file names.

MP3/WMA tracks are not

recorded in the format

compliant with ISO 9660

Change the disc.

(Record MP3/WMA

tracks using a compliant

Level 1, Level 2, Romeo, or application.)

Joliet.

Skip to another track or

• Noise is generated.

The track played back

is not an MP3/WMA

track (although it has the

extension code <.mp3> or

<.wma>).

change the disc. (Do not add

the extension code <.mp3>

or <.wma> to non-MP3 or

WMA tracks.)

Readout time varies due to

the complexity of the folder/ hierarchies and folders.

file configuration.

Do not use too many

• A longer readout time is

required (“CHECK” keeps

flashing on the display).

Playback order is determined

when the files are recorded.

• Tracks cannot be played

back as you have intended

them to play.

This sometimes occurs

during play. This is caused

by how the tracks are

recorded on the disc.

• Elapsed playing time is not

correct.

The current disc does not

contain any MP3/WMA

tracks.

Insert a disc that contains

MP3/WMA tracks.

• “NO FILES” appears on

the display.

This receiver can only

• Correct characters are

not displayed (e.g. album

name).

display alphabets (capital:

A – Z), numbers, and a

limited number of symbols.

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

AUDIO AMPLIFIER SECTION

Maximum Power Output:

CD PLAYER SECTION

Type: Compact disc player

Front: 50 W per channel

Rear: 50 W per channel

Signal Detection System: Non-contact optical

pickup (semiconductor laser)

Continuous Power Output (RMS):

Front: 19 W per channel into 4 Ω, 40 Hz

to 20 000 Hz at no more than 0.8%

total harmonic distortion.

Number of Channels: 2 channels (stereo)

Frequency Response: 5 Hz to 20 000 Hz

Dynamic Range:

96 dB

Signal-to-Noise Ratio: 98 dB

Wow and Flutter: Less than measurable limit

MP3 Decoding Format:

Rear: 19 W per channel into 4 Ω, 40 Hz

to 20 000 Hz at no more than 0.8%

total harmonic distortion.

MPEG1/2 Audio Layer 3

Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)

Tone Control Range:

Max. Bit Rate: 320 kbps

WMA (Windows Media^®Audio) Decoding

Format:

Bass:

10 dB at 100 Hz

Treble: 10 dB at 10 kHz

Frequency Response: 40 Hz to 20 000 Hz

Signal-to-Noise Ratio: 70 dB

Max. Bit Rate: 192 kbps

Line-Out Level/Impedance:

GENERAL

2.5 V/20 kΩ load (full scale)

Power Requirement:

Output Impedance: 1 kΩ

Operating Voltage:

Other Terminal: Steering wheel remote input

DC 14.4 V (11 V to 16 V allowance)

Grounding System: Negative ground

Allowable Operating Temperature:

0°C to +40°C

Dimensions (W × H × D):

Installation Size (approx.):

182 mm × 52 mm × 150 mm

Panel Size (approx.):

TUNER SECTION

Frequency Range:

FM: 87.5 MHz to 108.0 MHz

AM: (MW) 522 kHz to 1 620 kHz

(LW) 144 kHz to 279 kHz

188 mm × 58 mm × 11 mm

Mass (approx.):

[FM Tuner]

Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)

50 dB Quieting Sensitivity:

16.3 dBf (1.8 µV/75 Ω)

1.3 kg (excluding accessories)

Alternate Channel Selectivity (400 kHz): 65 dB

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 30 dB

Design and specifications are subject to change

without notice.

Capture Ratio: 1.5 dB

[MW Tuner]

Sensitivity: 20 µV

Selectivity: 35 dB

[LW Tuner]

Sensitivity: 50 µV

• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft

Corporation in the United States and/or other countries.

Download from Www.Somanuals.com. All Manuals Search And Download.

Having TROUBLE with operation?

Please reset your unit

Refer to page of How to reset your unit

Vous avez des PROBLÈMES de fonctionnement?

Réinitialisez votre appareil

Référez-vous à la page intitulée Comment réinitialiser votre appareil

EN, FR

0105DTSMDTJEIN

Download from Www.Somanuals.com. All Manuals Search And Download.

KD-G312/KD-G311

Installation/Connection Manual

Manuel d’installation/raccordement

GET0260-010B

[EX/EU]

0105DTSMDTJEIN

EN, FR

ENGLISH

FRANÇAIS

This receiver is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If

your vehicle does not have this system, a voltage inverter is required, which can be purchased

at JVC IN-CAR ENTERTAINMENT dealers.

Cet appareil est conçu pour fonctionner sur des sources de courant continu de 12 V à masse

NEGATIVE. Si votre véhicule n’offre pas ce type d’alimentation, il vous faut un convertisseur de tension,

que vous pouvez acheter chez un revendeur d’autoradios JVC.

Parts list for installation and connection

The following parts are provided for this receiver.

After checking them, please set them correctly.

Liste des pièces pour l’installation et raccordement

Les pièces suivantes sont fournies avec cet appareil.

Après vérification, veuillez les placer correctement.

A / B

Power cord

Cordon d’alimentation

Sleeve

Manchon

Trim plate

Plaque d’assemblage

Hard case/Control panel

Etui de transport/Panneau de

commande

Washer (ø5)

Rondelle (ø5)

Lock nut (M5)

Ecrou d’arrêt (M5)

Mounting bolt (M5 x 20 mm)

Boulon de montage (M5 x 20 mm)

Rubber cushion

Amortisseur en caoutchouc

Handles

Poignées

INSTALLATION (IN-DASH MOUNTING)

The following illustration shows a typical installation. If you have any questions or require

information regarding installation kits, consult your JVC IN-CAR ENTERTAINMENT dealer or a

company supplying kits.

INSTALLATION (MONTAGE DANS LE TABLEAU DE BORD)

L’illustration suivante est un exemple d’installation typique. Si vous avez des questions ou avez besoin

d’information sur des kits d’installation, consulter votre revendeur d’autoradios JVC ou une compagnie

d’approvisionnement.

•

If you are not sure how to install this receiver correctly, have it installed by a qualified technician.

• Si l’on n’est pas sûr de pouvoir installer correctement cet appareil, le faire installer par un technicien qualifié.

Do the required electrical connections.

Réalisez les connexions électriques.

*¹When you stand the receiver, be

careful not to damage the fuse on

the rear.

Bend the appropriate tabs to hold the

sleeve firmly in place.

Tordez les languettes appropriées pour

maintenir le manchon en place.

Lorsque vous mettez l’appareil à la

verticale, faire attention de ne pas

endommager le fusible situé sur l’arrière.

Removing the receiver / Retrait de l’appareil

Before removing the receiver, release the rear section.

Avant de retirer l’appareil, libérer la section arrière.

When using the optional stay / Lors When installing the receiver without using the sleeve / Lors de

de l’utilisation du hauban en option l’installation de l’appareil scans utiliser de manchon

In a Toyota for example, first remove the car radio and install the receiver in its place.

Par exemple dans une Toyota, retirer d’abord l’autoradio et installer l’appareil à la

place.

Stay (option)

Hauban (en

option)

Fire wall

Cloison

* Not included for this

receiver.

* Non fourni avec cet appareil.

Flat type screws

(M5 x 8 mm)*

Vis à tête plate

(M5 x 8 mm)*

Dashboard

Tableau de

bord

Bracket*

Support*

Screw (option)

Vis (en option)

Flat type screws

(M5 x 8 mm)*

Vis à tête plate

(M5 x 8 mm)*

Pocket

Poche

Bracket*

Support*

Insert the two handles, then

pull them as illustrated so

that the receiver can be

removed.

Insérez les deux poignées, puis

tirez de la façon illustrée de

façon à retirer l’appareil.

Note

: When installing the receiver on the mounting bracket, make

sure to use the 8 mm-long screws. If longer screws are

used, they could damage the receiver.

Install the receiver at an

angle of less than 30˚.

Installez l’appareil avec un

angle de moins de 30˚.

Remarque : Lors de l’installation de l’appareil sur le support de montage,

s’assurer d’utiliser des vis d’une longueur de 8 mm. Si des vis plus

longues sont utilisées, elles peuvent endommager l’appareil.

PRECAUTIONS sur l’alimentation et la connexion

PRECAUTIONS on power supply and speaker

des enceintes:

connections:

• NE CONNECTEZ PAS les fils d’enceintes du cordon

d’alimentation à la batterie; sinon, l’appareil serait

sérieusement endommagé.

• DO NOT connect the speaker leads of the power cord to

the car battery; otherwise, the receiver will be seriously

damaged.

• AVANT de connecter les fils d’enceintes du cordon d’alimentation aux

enceintes, vérifiez le câblage des enceintes de votre voiture.

• BEFORE connecting the speaker leads of the power cord to the

speakers, check the speaker wiring in your car.

EN CAS DE DIFFICULTES

TROUBLESHOOTING

• Le fusible saute.

• The fuse blows.

* Les fils rouge et noir sont-ils racordés correctement?

* Are the red and black leads connected correctly?

• L’appareil ne peut pas être mise sous tension.

* Le fil jaune est-elle raccordée?

• Power cannot be turned on.

* Is the yellow lead connected?

• Pas de son des enceintes.

* Le fil de sortie d’enceinte est-il court-circuité?

• No sound from the speakers.

* Is the speaker output lead short-circuited?

• Le son est déformé.

• Sound is distorted.

* Is the speaker output lead grounded?

* Are the “–” terminals of L and R speakers grounded in common?

* Le fil de sortie d’enceinte est-il à la masse?

* Les bornes “–” des enceintes gauche et droit sont-elles mises ensemble à la masse?

• Interférence avec les sons.

La prise arrière de mise à la terre est-elle connectée au châssis de la voiture avec un cordon court et épais?

• Noise interfere with sounds.

* Is the rear ground terminal connected to the car’s chassis using shorter and thicker cords?

• L’appareil devient chaud.

• Receiver becomes hot.

* Le fil de sortie d’enceinte est-il à la masse?

* Is the speaker output lead grounded?

* Les bornes “–” des enceintes gauche et droit sont-elles mises ensemble à la masse?

* Are the “–” terminals of L and R speakers grounded in common?

• Cet appareil ne fonctionne pas du tout.

* Avez-vous réinitialisé votre appareil?

• This receiver does not work at all.

* Have you reset your receiver?

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

FRANÇAIS

ELECTRICAL CONNECTIONS

RACCORDEMENTS ELECTRIQUES

To prevent short circuits, we recommend that you disconnect the battery’s negative terminal and Pour éviter tout court-circuit, nous vous recommandons de débrancher la borne négative de la batterie et

make all electrical connections before installing the receiver.

• Be sure to ground this receiver to the car’s chassis again after installation.

d’effectuer tous les raccordements électriques avant d’installer l’appareil.

• Assurez-vous de raccorder de nouveau la mise à la masse de cet appareil au châssis

de la voiture après l’installation.

Notes:

• Replace the fuse with one of the specified rating. If the fuse blows frequently, consult your JVC Remarques:

IN-CAR ENTERTAINMENT dealer.

• Remplacer le fusible par un de la valeur précisée. Si le fusible saute souvent, consulter votre revendeur

d’autoradios JVC.

• Il est recommandé de connecter des enceintes avec une puissance de plus de 50 W (les enceintes arrière

et les enceintes avant, avec une impédance comprise entre 4 Ω et 8 Ω). Si la puissance maximum est

inférieure à 50 W, changez “AMP GAIN” pour éviter d’endommager vos enceintes (voir page 21 du

MANUEL D’INSTRUCTIONS).

• Pour éviter les court-circuits, couvrir les bornes des fils qui ne sont PAS UTILISÉS avec de la bande

isolante.

• Le dissipateur de chaleur devient très chaud après usage. Faire attention de ne pas le toucher en retirant

cet appareil.

• It is recommended to connect to the speakers with maximum power of more than 50 W (both

at the rear and at the front, with an impedance of 4 Ω to 8 Ω). If the maximum power is less

than 50 W, change “AMP GAIN” setting to prevent the speakers

from being damaged (see page 21 of the INSTRUCTIONS).

• To prevent short-circuit, cover the terminals of the UNUSED

leads with insulating tape.

Heat sink

Dissipateur de chaleur

• The heat sink becomes very hot after use. Be

careful not to touch it when removing this receiver.

A Typical connections / Raccordements typiques

Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause Avant de commencer la connexion: Vérifiez attentivement le câblage du véhicule. Une

serious damage to this receiver.

The leads of the power cord and those of the connector from the car body may be different in

color.

connexion incorrecte peut endommager sérieusement l’appareil.

Le fil du cordon d’alimentation et ceux des connecteurs du châssis de la voiture peuvent être différents

en couleur.

1 Connect the colored leads of the power cord in the order specified in the illustration below.

2 Connect the aerial cord.

Connectez les fils colorés du cordon d’alimentation dans l’ordre spécifié sur l’illustration ci-dessous.

2 Connectez le cordon d’antenne.

3 Finally connect the wiring harness to the receiver.

3 Finalement, connectez le faisceau de fils à l’appareil.

Note: If your vehicle does not have any accessory terminal, move the fuse from the fuse

position 1 (initial position) to fuse position 2, and connect the red lead (A7) to the positive (+)

battery terminal.

Remarque: Si votre véhicule ne possède pas de borne accessoire, déplacez le fusible de la position de

fusible 1 (position originale) à la position de fusible 2 et connectez le fil rouge (A7) à la borne positive

(+) de la batterie.

• The yellow lead (A4) is not used in this case.

• Le fil jaune (A4) n’est pas utilisé dans ce cas.

To steering wheel remote controller (see diagram

)

Pour la télécommande de volant (voir le diagramme

)

Fuse position 2 / Position de fusible 2

Fuse position 1 / Position de fusible 1

Rear ground

terminal

Borne arrière de

masse

*¹Not included for this receiver

Ignition switch

15 A fuse

Fusible 15 A

Non fourni avec cet appareil

Interrupteur d’allumage

Line out (see diagram

)

Sortie de ligne

(voir le diagramme

Aerial terminal

Borne de l’antenne

Black

Noir

)

To metallic body or chassis of the car

Vers corps métallique ou châssis de la voiture

Yellow*²

To a live terminal in the fuse block connecting to the car battery

(bypassing the ignition switch) (constant 12 V)

Jaune*²

À une borne sous tension du porte-fusible connectée à la batterie de la voiture

(en dérivant l’interrupteur d’allumage) (12 V constant)

Red

Rouge

To an accessory terminal in the fuse block

Fuse block

Porte-fusible

Vers borne accessoire du porte-fusible

Before checking the operation of this receiver

prior to installation, this lead must be connected,

otherwise power cannot be turned on.

Pour vérifier le fonctionnement de cet appareil avant

installation, ce fil doit être raccordé, sinon l’appareil

ne peut pas être mis sous tension.

Blue with white stripe

Bleu avec bande blanche

To the remote lead of other equipment or power aerial if any (200 mA max.)

Au fil de télécommande de l’autre appareil ou à l’antenne automatique s’il y en a une

(200 mA max.)

Brown

Marron

To cellular phone system

À un système de téléphone cellulaire

White with black stripe

White

Gray with black stripe

Gray

Green with black stripe

Green

Purple with black stripe

Purple

Blanc avec bande noire

Blanc

Gris avec bande noire

Gris

Vert avec bande noire

Vert

Violet avec bande noire

Violet

Left speaker (front)

Right speaker (front)

Left speaker (rear)

Right speaker (rear)

Enceinte gauche (avant)

Enceinte droit (avant)

Enceinte gauche (arrière)

Enceinte droit (arrière)

Connecting the external amplifier / Connexion d’un amplificateur extérieur

You can connect an amplifier to upgrade your car stereo system.

• Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so • Connectez le fil de commande à distance (bleu avec bande blanche) au fil de commande à distance de

that it can be controlled through this receiver.

l’autre appareil de façon qu’il puisse être commandé via cet appareil.

• Disconnect the speakers from this receiver, connect them to the amplifier. Leave the • Déconnectez les enceintes de cet appareil et connectez-les à l’amplificateur. Laissez

Vous pouvez connecter un amplificateur pour améliorer votre système autoradio.

speaker leads of this receiver unused.

les fils d’enceintes de cet appareil inutilisés.

Rear speakers

Enceintes arrière

Remote lead

Fil d’alimentation à distance

Y-connector (not supplied for this receiver)

Connecteur Y (non fourni avec cet appareil)

*³Firmly attach the ground wire to the metallic

body or to the chassis of the car—to the place

not coated with paint (if coated with paint,

remove the paint before attaching the wire).

Failure to do so may cause damage to the

receiver.

Attachez solidement le fil de mise à la masse au

châssis métallique de la voiture—à un endroit qui

n’est pas recouvert de peinture (s’il est recouvert

de peinture, enlevez d’abord la peinture avant

d’attacher le fil). L’appareil peut être endommagé si

cela n’est pas fait correctement.

JVC Amplifier

JVC Amplificateur

Remote lead (Blue with white stripe)

Fil d’alimentation à distance (Bleu avec bande blanche)

Signal cord (not supplied for this receiver)

Cordon de signal (non fourni avec cet appareil)

To the remote lead of other equipment or power

aerial if any

Au fil de télécommande de l’autre appareil ou à l’antenne

automatique s’il y en a une

Front speakers

Enceintes avant

Connecting to the steering wheel remote controller / Connexion de la télécommande de volant

If your car is equipped with the steering wheel remote controller, you can operate this receiver using the

OE remote adapter (not supplied)

Adaptateur pour télécommande au volant (non fourni)

controller. To do it, a JVC’s OE remote adapter (not supplied) which matches with your car is required.

Consult your JVC IN-CAR ENTERTAINMENT dealer for details.

Steering wheel remote input

Entrée de la télécommande de volant

Si votre voiture est munie d’une télécommande de volant, vous pouvez commander cet autoradio en utilisant la

télécommande. Pour le faire, un adaptateur pour télécommande au volant JVC (non fourni) correspondant à votre

voiture est nécessaire. Consultez votre revendeur d’autoradio JVC pour les détails.

Steering wheel remote controller (equipped in the car)

Télécommande de volant (installée dans la voiture)

Download from Www.Somanuals.com. All Manuals Search And Download.

CD RECEIVER

РЕСИВЕР С ПРОИГРЫВАТЕЛЕМ КОМПАКТ-ДИСКОВ

KD-G317

В соответствии с Законом Российской Федерации “О защите прав

потребителей” срок службы (годности) данного товара “по истечении

которого он может представлять опасность для жизни, здоровья

потребителя, причинять вред его имуществу или окружающей среде”

составляет семь (7) лет со дня производства. Этот срок является

временем, в течение которого потребитель данного товара может

безопасно им пользоваться при условии соблюдения инструкции по

эксплуатации данного товара, проводя необходимое обслуживание,

включающее замену расходных материалов и/или соответствующее

ремонтное обеспечение в специализированном сервисном центре.

Дополнительные косметические материалы к данному товару,

поставляемые вместе с ним, могут храниться в течение двух (2) лет со

дня его производства.

Срок службы (годности), кроме срока хранения дополнительных

косметических материалов, упомянутых в предыдущих двух пунктах,

не затрагивает никаких других прав потребителя, в частности,

гарантийного свидетельства JVC, которое он может получить в

соответствии с законом о правах потребителя или других законов,

связанных с ним.

For installation and

connections, refer to the

separate manual.

Указания по установке и

выполнению соединений

приводятся в отдельной

инструкции.

For canceling the display demonstration, see page 7.

Информацию об отмене демонстрации функций дисплея см. на стр. 7.

INSTRUCTIONS

ИНСТРУКЦИИ ПО ЭКСПЛУАТАЦИИ

GET0261-001A

[EE]

Download from Www.Somanuals.com. All Manuals Search And Download.

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to

obtain the best possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave

all servicing to qualified service personnel.

3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated.

Avoid direct exposure to beam.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

Warning:

How to forcibly eject a disc

If a disc cannot be recognized by the

receiver or cannot be ejected, ejects the disc

as follows.

If you need to operate the receiver while

driving, be sure to look ahead carefully or

you may be involved in a traffic accident.

How to reset your unit

• If this does not work, try to reset your

receiver.

• Be careful not to drop the disc when it

ejects.

• This will reset the microcomputer. Your

preset adjustments will also be erased.

• If a disc is loaded, it will eject. Be careful

not to drop the disc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

How to reset your unit ...........................

How to forcibly eject a disc...................

How to read this manual........................

How to use the MODE button...............

Sound adjustments ................18

Selecting preset sound modes

(C-EQ: custom equalizer) .................. 18

Adjusting the sound............................... 19

Control panel — KD-G317......... 5

Parts identification.................................

General settings — PSM .........20

Basic procedure ..................................... 20

Getting started....................... 6

Detaching the control

Basic operations...........................

Canceling the display demonstrations...

Setting the clock ....................................

panel ..................................22

Using the remote controller

— RM-RK60............................23

Main elements and features ................... 23

Radio operations ................... 8

Listening to the radio...........................

Storing stations in memory....................

Maintenance..........................24

More about this receiver ........25

Troubleshooting.....................27

Specifications.........................29

Listening to a preset station................... 10

FM RDS operations.................11

Searching for your favorite FM RDS

programme....................................... 11

Storing your favorite programmes......... 12

Using the standby receptions................. 12

Tracking the same programme

—Network-Tracking Reception ........ 13

Disc operations ......................14

Playing a disc ..................................... 14

Changing the display information ......... 16

Selecting the playback modes................ 17

*For safety....

• Do not raise the volume level too much, as

this will block outside sounds, making driving

dangerous.

• Stop the car before performing any

complicated operations.

*Temperature inside the car....

If you have parked the car for a long time in

hot or cold weather, wait until the temperature

in the car becomes normal before operating the

unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to read this manual

How to use the MODE button

The following methods are used to made the

explanations simple and easy-to-understand:

• Some related tips and notes are explained in

“More about this receiver” (see page 25).

• Button operations are mainly explained with

the illustrations as follows:

If you press MODE, the receiver goes into

functions mode, then the number buttons and

¢/4

buttons work as different

function buttons.

Ex.: When number button 2 works as

MO (monaural) button.

Press briefly.

Press repeatedly.

Press either one.

Time countdown indicator

To use these buttons for original functions

again after pressing MODE, wait for

5 seconds without pressing any of these buttons

until the functions mode is cleared.

• Pressing MODE again also clears the

functions mode.

Press and hold until

your desired response

begins.

Press and hold both

buttons at the same

time.

Download from Www.Somanuals.com. All Manuals Search And Download.

Control panel — KD-G317

Parts identification

Display window

1 +/– buttons

(control panel release) button

2 DISP (display) button

3 Loading slot

; Number buttons

4 Display window

5 MODE button

Display window

a Tunerreceptionindicators—MO(monaural),

ST (stereo)

6 0 (eject) button

¢/4

buttons

s WMA indicator

d RDS indicators—TP, PTY, AF, REG

f MP3 indicator

g CD indicator

h Playback mode / item indicators—

RND (random),

RPT (repeat)

j LOUD (loudness) indicator

k EQ (equalizer) indicator

l Sound mode (C-EQ: custom equalizer)

indicators—ROCK, CLASSIC, POPS,

HIP HOP, JAZZ, USER

(standby/on/attenuator) button

9 SEL (select) button

p Remote sensor

• You can control this receiver with an

optionally purchased remote controller.

• DO NOT expose the remote sensor to

strong light (direct sunlight or artificial

lighting).

(disc),

(folder),

q EQ (equalizer) button

w MO (monaural) button

e SSM (Strong-station Sequential Memory)

button

r CD button

t FM/AM button

•

also works as the time countdown

indicator.

/ Disc information indicators—TAG (ID3

Tag), (folder), (track/file)

y RPT (repeat) button

u RND (random) button

i T/P (traffic programme/programme type)

button

z Main display

x Source display / Volume level indicator

c Tr (track) indicator

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting started

Basic operations

To drop the volume in a moment (ATT)

To restore the sound, press it

again.

To turn off the power

You cannot select “CD” as the playback

source if there is no disc in the loading

slot.

Caution on volume setting:

Discs produce very little noise compared

with other sources. Lower the volume

before playing a disc to avoid damaging

the speakers by the sudden increase of the

output level.

Volume level appears.

Volume level indicator

⁄

Adjust the sound as you want.

(See pages 18 and 19.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Canceling the display

demonstrations

If no operations are done for about 20 seconds,

display demonstration starts.

Setting the clock

[Initial: DEMO ON]—see page 20.

2 Set the hour and minute.

1 Select “CLOCK H” (hour), then

adjust the hour.

2 Select “CLOCK M” (minute),

then adjust the minute.

3 Finish the procedure.

To check the current clock time when the

power is turned off

4 Finish the procedure.

To activate the display demonstration

In step 3 above...

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio operations

Listening to the radio

To tune in to a station manually

In step Ÿ on the left...

Lights up when receiving an FM stereo

broadcast with sufficient signal strength.

Selected band appears.

Start searching for a station.

2 Select the desired station frequencies.

When a station is received, searching

stops.

To stop searching, press the same

button again.

Note:

FM1 and FM2: 87.5 MHz – 108.0 MHz

FM3: 65.00 MHz – 74.00 MHz

Download from Www.Somanuals.com. All Manuals Search And Download.

When an FM stereo broadcast is hard to

receive

Storing stations in memory

You can preset six stations for each band.

FM station automatic presetting—

SSM (Strong-station Sequential

Memory)

1 Select the FM band (FM1 – FM3)

you want to store into.

Lights up when monaural mode is activated.

Reception improves, but stereo effect will

be lost.

To restore the stereo effect, repeat the same

procedure so that the MO indicator goes off.

“SSM” flashes, then disappears when

automatic presetting is over.

Local FM stations with the strongest signals are

searched and stored automatically in the FM

band.

Download from Www.Somanuals.com. All Manuals Search And Download.

Manual presetting

Ex.:Storing FM station of 92.5 MHz into the

preset number 4 of the FM1 band.

Listening to a preset station

2 Select the preset station (1 – 6) you

want.

To check the current clock time while

listening to an FM (non-RDS) or AM station

• For FM RDS stations, see page 13.

Preset number flashes for a while.

Download from Www.Somanuals.com. All Manuals Search And Download.

FM RDS operations

Searching for your favorite FM RDS programme

You can tune in to a station broadcasting your

favorite programme by searching for a PTY code.

Start searching for your favorite

programme.

The last selected PTY code appears.

If there is a station broadcasting a

programme of the same PTY code as

you have selected, that station is tuned

in.

Select one of your favorite

programme type.

PTY codes

NEWS, AFFAIRS, INFO, SPORT,

EDUCATE, DRAMA, CULTURE,

SCIENCE, VARIED, POP M (music),

ROCK M (music), EASY M (music),

LIGHT M (music), CLASSICS,

OTHER M (music), WEATHER,

FINANCE, CHILDREN, SOCIAL,

RELIGION, PHONE IN, TRAVEL,

LEISURE, JAZZ, COUNTRY,

Select one of the twenty-nine PTY

codes.

NATION M (music), OLDIES,

FOLK M (music), DOCUMENT

Ex.: When “ROCK M” is selected

Download from Www.Somanuals.com. All Manuals Search And Download.

3 Repeat steps 1 and 2 to store

other PTY codes into other preset

numbers.

What you can do with RDS

RDS (Radio Data System) allows FM

stations to send an additional signal along

with their regular programme signals.

By receiving the RDS data, this receiver can

do the following:

4 Finish the procedure.

•

Programme Type (PTY) Search (see page 11)

• Standby Reception of Traffic

Announcement—TA (see the following) or

your favorite programme (PTY) (see pages

13 and 21)

Using the standby receptions

•

Tracing the same programme automatically

—Network-Tracking Reception (see page 13)

• Programme Search (see page 21)

TA Standby Reception

TA Standby Reception allows the receiver to

switch temporarily to Traffic Announcement

(TA) from any source other than AM.

The volume changes to the preset TA volume

level (see page 21).

Storing your favorite programmes

You can store six favorite programme types.

To activate TA Standby Reception

Preset programme types in the number buttons

(1 to 6)

The TP indicator either

lights up or flashes.

• If the TP indicator lights up, TA Standby

Reception is activated.

1 Select a PTY code (see page 11).

• If the TP indicator flashes, TA Standby

Reception is not yet activated. (This occurs

when you are listening to an FM station

without the RDS signals required for TA

Standby Reception.)

2 Select the preset number (1 – 6) you

want to store into.

To activate TA Standby Reception, tune in to

another station providing these signals. The

TP indicator will stop flashing and remain lit.

To deactivate the TA Standby Reception

The TP indicator goes off.

Ex.: When “ROCK M” is selected

Download from Www.Somanuals.com. All Manuals Search And Download.

PTY Standby Reception

PTY Standby Reception allows the receiver

to switch temporarily to your favorite PTY

programme from any source other than AM.

Tracking the same programme—

Network-Tracking Reception

When driving in an area where FM reception

is not sufficient enough, this receiver

automatically tunes in to another FM RDS

station of the same network, possibly

broadcasting the same programme with stronger

signals (see the illustration below).

To activate and select your favorite PTY

code for PTY Standby Reception, see page

21.

The PTY indicator either lights up or flashes.

When shipped from the factory, Network-

Tracking Reception is activated.

• If the PTY indicator lights up, PTY Standby

Reception is activated.

To change the Network-Tracking Reception

setting, see page 21.

• If the PTY indicator flashes, PTY Standby

Reception is not yet activated.

To activate PTY Standby Reception, tune in

to another station providing these signals. The

PTY indicator will stop flashing and remain

lit.

Programme A broadcasting on different

frequency areas (01 – 05)

To deactivate the PTY Standby Reception,

select “OFF” for the PTY code (see page 21).

The PTY indicator goes off.

To check the current clock time while

listening to an FM RDS station

Download from Www.Somanuals.com. All Manuals Search And Download.

Disc operations

Playing a disc

All tracks will be played

repeatedly until you change

the source or eject the disc.

• When inserting an audio CD or a CD Text

disc:

About MP3 and WMA discs

MP3 and WMA (Windows Media^®Audio)

“tracks” (words “file” and “track” are used

interchangeably) are recorded in “folders.”

Total playing time of Total track number

the inserted disc

of the inserted disc

• When inserting an MP3 or a WMA disc:

CD Text: Disc title/performer =

Track title appears automatically

(see page 16).

Total folder

number

Total file

number

Elapsed playing Current track

time

number

Disc information appears

automatically (see page 16).

To stop play and eject the disc

Selected folder number

Elapsed

playing time

Current track

number

* Either the MP3 or WMA indicator lights up

depending on the detected file.

Download from Www.Somanuals.com. All Manuals Search And Download.

To fast-forward or reverse the track

To locate a particular track (for CD) or

folder (for MP3 or WMA discs) directly

To select a number from 01 – 06:

Fast-forwards.

Reverses.

To select a number from 07 – 12:

To go to the next or previous tracks

To the following tracks.

• To use folder search on MP3/WMA discs, it

is required that folders are assigned with

2-digits number at the beginning of their

folder names—01, 02, 03, and so on.

To the beginning of the current track, then

the previous tracks.

• To select a particular track in a folder

(for MP3 or WMA disc) after selecting a

folder:

To go to the next or previous folders

(only for MP3 or WMA discs)

Prohibiting disc ejection

You can lock a disc in the loading slot.

To next folders.

To previous folders.

To cancel the prohibition, repeat the same

procedure.

Download from Www.Somanuals.com. All Manuals Search And Download.

Changing the display information

While playing an audio CD or a CD Text

*¹If the current disc is an audio CD, “NO NAME” appears.

While playing an MP3 or WMA disc

• When “TAG DISP” is set to “TAG ON” (see page 21)

*²If an MP3/WMA file does not have ID3 tags, folder name and file name appear. In this

case, the TAG indicator will not light up.

• When “TAG DISP” is set to “TAG OFF”

Download from Www.Somanuals.com. All Manuals Search And Download.

Selecting the playback modes

You can use only one of the following playback modes at a time.

2 Select your desired playback mode.

Repeat play

Mode

Plays repeatedly

TRK RPT:

The current track.

• RPT lights up.

FLDR RPT*: All tracks of the current folder.

and RPT light up.

•

RPT OFF:

Cancels.

Ex.: When “TRK RPT” is selected while

playing an MP3 disc

Random play

Mode

Plays at random

FLDR RND*: All tracks of the current folder,

then tracks of the next folder

and so on.

• RND and

light up.

DISC RND: All tracks of the current disc.

• RND and

Cancels.

light up.

RND OFF:

Ex.: When “DISC RND” is selected while

playing an MP3 disc

*Only while playing an MP3 or WMA disc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Sound adjustments

Selecting preset sound modes (C-EQ: custom equalizer)

You can select a preset sound mode suitable to

the music genre.

Preset values

Indication

For:

BAS TRE LOUD

00 00 OFF

USER

ROCK

(Flat sound)

+03 +01 ON

+01 –02 OFF

+04 +01 OFF

Rock or

disco music

CLASSIC

Classical

music

POPS

Light music

HIP HOP

+02

Funk or rap

music

JAZZ

+02 +03 OFF

Jazz music

*¹BAS: Bass

*²TRE: Treble

*³LOUD: Loudness

Ex.: When “ROCK” is selected

Indication pattern for each sound mode:

Download from Www.Somanuals.com. All Manuals Search And Download.

Indication

BAS*¹

(bass)

To do:

Range

Adjusting the sound

You can adjust the sound characteristics to your

preference.

Adjust the bass.

–06 (min.)

+06 (max.)

TRE*¹

(treble)

Adjust the treble.

–06 (min.)

+06 (max.)

FAD*²

(fader)

Adjust the front

and rear speaker

balance.

R06 (Rear

only)

F06 (Front

only)

BAL

Adjust the left

L06 (Left

only)

Ex.: When “TRE” is selected

(balance) and right speaker

balance.

R06 (Right

only)

LOUD*¹

(loudness) high frequencies

Boost low and

LOUD ON

Indication pattern changes as

you adjust the level.

to produce a well- LOUD OFF

balanced sound at

low volume level.

VOL*³

Adjust the volume. 00 (min.) to

(volume)

30 or 50

(max.)*⁴

*¹When you adjust the bass, treble, or

loudness, the adjustment you have made is

stored for the currently selected sound mode

(C-EQ) including “USER.”

*²If you are using a two-speaker system, set

the fader level to “00.”

*³Normally the +/– buttons work as the volume

control. So you do not have to select “VOL”

to adjust the volume level.

*⁴Depending on the amplifier gain control

setting. (See page 21 for details.)

Download from Www.Somanuals.com. All Manuals Search And Download.

General settings — PSM

3 Adjust the PSM item selected.

Basic procedure

You can change PSM (Preferred Setting Mode)

items listed in the table that follows.

4 Repeat steps 2 and 3 to adjust the

other PSM items if necessary.

5 Finish the procedure.

2 Select a PSM item.

Ex.: When you select “DIMMER”

Indications

Selectable settings, [reference page]

DEMO

Display demonstration

DEMO ON: [Initial]; Display demonstration will be activated

automatically if no operation is done for about

20 seconds, [7].

DEMO OFF: Cancels.

CLOCK H

0 – 23, [7]

Hour adjustment

[Initial: 0 (0:00)]

00 – 59, [7]

CLOCK M

[Initial: 00 (0:00)]

Minute adjustment

CLK ADJ

AUTO: [Initial]; The built-in clock is automatically adjusted

Clock adjustment

using the CT (clock time) data in the RDS signal.

OFF:

Cancels.

Download from Www.Somanuals.com. All Manuals Search And Download.

Indications

Selectable settings, [reference page]

AF-REG

When the received signals from the current station become weak...

Alternative frequency/

regionalization reception

AF:

[Initial]; Switches to another station (the programme

may differ from the one currently received), [13].

• The AF indicator lights up.

AF REG: Switches to another station broadcasting the same

programme.

• The AF and REG indicators light up.

OFF:

Cancels.

PTY-STBY

PTY standby

Activates PTY Standby Reception with one of the 29 PTY codes,

[13].

OFF [Initial]

29 PTY codes, [11]

(back to the beginning)

TA VOL

[Initial: VOL 20]; VOL 00 – VOL 30 or 50*, [12]

Traffic announcement

volume

* Depends on the amplifier gain control.

P-SEARCH

Programme search

ON:

Using the AF data, the receiver tunes in to another

frequency broadcasting the same programme as the

original preset RDS station is if the preset station

signals are not sufficient.

OFF:

[Initial]; Cancels.

DIMMER

ON:

Activates dimmer.

Dimmer

OFF:

[Initial]; Cancels.

TEL

MUTING 1/MUTING 2: Select either one which mutes the

Telephone muting

sounds while using the cellular phone.

OFF:

[Initial]; Cancels.

SCROLL*

ONCE: [Initial]; Scrolls the disc information once.

Scroll

AUTO: Repeats scrolling (5-seconds interval in between).

OFF:

Cancels.

• Pressing DISP for more than one second can scroll the display

regardless of the setting.

TAG DISP

TAG ON:

[Initial]; Shows the ID3 tag while playing

Tag display

MP3/WMA tracks, [16].

TAG OFF: Cancels.

AMP GAIN

Amplifier gain control

You can change the maximum volume level of this receiver.

LOW PWR: VOL 00 – VOL 30 (Select this if the maximum

power of the speaker is less than 50 W to prevent

them from damaging the speaker.)

HIGH PWR: [Initial]; VOL 00 – VOL 50

* Some characters or symbols will not be shown (and will be blanked) on the display.

(Ex. “ABCå!d#” ]“ABCA D ”.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Detaching the control panel

When detaching or attaching the control panel,

Attaching the control panel

be careful not to damage the connectors on

the back of the control panel and on the panel

holder.

Detaching the control panel

Before detaching the control panel, be sure to

turn off the power.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the remote controller — RM-RK60

This receiver can be remotely controlled as

instructed here (with an optionally purchased

Main elements and features

remote controller). We recommend that you use

remote controller RM-RK60 with your receiver.

• When operating, aim the remote controller

directly at the remote sensor on the

receiver. Make sure there is no obstacle in

between.

Installing the lithium coin battery

(CR2025)

(standby/on attenuator) button

• Turns on and off the power and also

attenuates the sound.

2 SRC (source) button

Warning:

• Selects the source.

3 R (reverse) / F (forward) buttons

• Searches for stations if pressed briefly.

• Fast-forwards or reverses the track if

pressed and held.

• Changes the tracks of the disc.

4 SOUND button

• Store the battery in a place where children

cannot reach to avoid risk of accident.

• To prevent the battery from over-heating,

cracking, or starting a fire:

– Do not recharge, short, disassemble, or

heat the battery or dispose of it in a fire.

– Do not leave the battery with other

metallic materials.

– Do not poke the battery with tweezers or

similar tools.

– Wrap the battery with tape and insulate

when throwing away or saving it.

• Selects the sound mode (C-EQ: custom

equalizer).

5 U (up) / D (down) buttons

• U (up): Changes the FM/AM bands.

• D (down): Changes the preset stations.

• Changes the folder of the MP3/WMA

discs.

6 VOLUME +/– buttons

• Adjusts the volume level.

Caution:

Download from Www.Somanuals.com. All Manuals Search And Download.

Maintenance

How to clean the connectors

To keep discs clean

Frequent detachment will deteriorate the

connectors.

A dirty disc may not play correctly.

If a disc does become dirty, wipe

it with a soft cloth in a straight line

from center to edge.

To minimize this possibility, periodically wipe

the connectors with a cotton swab or cloth

moistened with alcohol, being careful not to

damage the connectors.

• Do not use any solvent (for

example, conventional record cleaner, spray,

thinner, benzine, etc.) to clean discs.

To play new discs

New discs may have some rough

spots around the inner and outer

edges. If such a disc is used, this

receiver may reject the disc.

Connector

To remove these rough spots, rub the edges

with a pencil or ball-point pen, etc.

Moisture condensation

Moisture may condense on the lens inside the

CD player in the following cases:

• After starting the heater in the car.

• If it becomes very humid inside the car.

Should this occur, the CD player may

malfunction. In this case, eject the disc and

leave the receiver turned on for a few hours

until the moisture evaporates.

How to handle discs

When removing a disc from

its case, press down the center

holder of the case and lift the

disc out, holding it by the

edges.

Center holder

• Always hold the disc by the edges. Do not

touch its recording surface.

When storing a disc into its case, gently insert

the disc around the center holder (with the

printed surface facing up).

• Make sure to store discs into the cases after

use.

Do not use the following discs:

Stick-on

Sticker

Warped

label

residue

Disc

disc

Download from Www.Somanuals.com. All Manuals Search And Download.

More about this receiver

Inserting a disc

• When a disc is inserted upside down, the disc

automatically ejects.

• Do not insert 8 cm discs (single CD) and

unusual shape discs (heart, flower, etc.) into

the loading slot.

Basic operations

Turning on the power

• By pressing CD or FM/AM on the receiver,

you can also turn on the power.

Turning off the power

• If you turn off the power while listening to a

disc, disc play will start from where playback

has been stopped previously, next time you

turn on the power.

Playing a disc

• While fast-forwarding or reversing on an MP3

or WMA disc, you can only hear intermittent

sounds.

Tuner operations

Storing stations in memory

• During SSM search...

– All previously stored stations are erased and

stations are stored newly.

– Received stations are preset in No. 1 (lowest

frequency) to No. 6 (highest frequency).

– When SSM is over, the station stored in

No. 1 will be automatically tuned in.

• When storing a station manually, a previously

preset station is erased when a new station is

stored in the same preset number.

Playing a CD-R or CD-RW

• Use only “finalized” CD-Rs or CD-RWs.

• This receiver can play back only the files of

the same type which is first detected if a disc

includes both audio CD (CD-DA) files and

MP3/WMA files.

• This receiver can play back multi-session

discs; however, unclosed sessions will be

skipped while playing.

• Some CD-Rs or CD-RWs may not play

back on this receiver because of their disc

characteristics, and for the following causes:

– Discs are dirty or scratched.

– Moisture condensation occurs on the lens

inside the receiver.

FM RDS operations

• Network-Tracking Reception requires two

types of RDS signals—PI (Programme

Identification) and AF (Alternative

Frequency) to work correctly. Without

receiving these data correctly, Network-

Tracking Reception will not operate.

• If a Traffic Announcement is received, the

volume level (TA Volume) automatically

changes to the preset level.

– The pickup lens inside the receiver is dirty.

– CD-R/CD-RW on which the files are

written with “Packet Write” method.

– There are improper recording conditions

(missing data, etc.) or media conditions

(stain, scratch, warp, etc.).

• CD-RWs may require a longer readout time

since the reflectance of CD-RWs is lower

than that of regular CDs.

• Do not use the following CD-Rs or CD-RWs:

– Discs with stickers, labels, or protective seal

stuck to the surface.

– Discs on which labels can be directly

printed by an ink jet printer.

Using these discs under high temperatures or

high humidities may cause malfunctions or

damages to discs.

Disc operations

General

• This receiver has been designed to reproduce

CDs/CD Texts, and CD-Rs (Recordable)/

CD-RWs (Rewritable) in audio CD (CD-DA),

MP3 and WMA format.

• When a disc has been loaded, selecting “CD”

for the playback source starts disc play.

Download from Www.Somanuals.com. All Manuals Search And Download.

• This receiver cannot play back the following

files:

– MP3 files encoded with MP3i and MP3

PRO format.

– MP3 files encoded in an unappropriated

format.

– MP3 files encoded with Layer 1/2.

– WMA files encoded with lossless,

professional, and voice format.

– WMA files which are not based upon

Windows Media^®Audio.

– WMA formatted files copy-protected with

DRM.

– Files which have the data such as WAVE,

ATRAC3, etc.

Playing an MP3/WMA disc

• This receiver can play back MP3/WMA files

with the extension code <.mp3> or <.wma>

(regardless of the letter case—upper/lower).

• This receiver can show the names of albums,

artists (performer), and ID3 Tag (Version 1.0,

1.1, 2.2, 2.3, or 2.4) for MP3 files and for

WMA files.

• This receiver can handle only one-byte

characters. No other characters can be

correctly displayed.

• This receiver can play back MP3/WMA files

meeting the conditions below:

– Bit rate: 8 kbps — 320 kbps

– Sampling frequency:

• The search function works but search speed is

not constant.

48 kHz, 44.1 kHz, 32 kHz (for MPEG-1)

24 kHz, 22.05 kHz, 16 kHz (for MPEG-2)

– Disc format: ISO 9660 Level 1/ Level 2,

Romeo, Joliet, Windows long file name

• The maximum number of characters for file/

folder names vary among the disc format used

(includes 4 extension characters—<.mp3> or

<.wma>).

– ISO 9660 Level 1: up to 12 characters

– ISO 9660 Level 2: up to 31 characters

– Romeo*: up to 128 (72) characters

– Joliet*: up to 64 (36) characters

– Windows long file name*: up to 128 (72)

characters

* The parenthetic figure is the maximum

number of characters for file/folder names

in case the total number of files and folders

is 313 or more.

Changing the source

• If you change the source, playback also stops

(without ejecting the disc).

Next time you select “CD” for the playback

source, disc play starts from where it has been

stopped previously.

Ejecting a disc

• If the ejected disc is not removed within

15 seconds, the disc is automatically inserted

again into the loading slot to prevent it from

dust. (Disc will not play this time.)

General settings—PSM

• If you change the “AMP GAIN” setting from

“HIGH PWR” to “LOW PWR” while the

volume level is set higher than “VOL 30,” the

receiver automatically changes the volume

level to “VOL 30.”

• This receiver can recognize the total of 512

files, of 200 folders, and of 8 hierarchies.

• This receiver can play back the files recorded

in VBR (variable bit rate).

The files recorded in VBR have a discrepancy

in elapsed time display, and do not show

the actual elapsed time. Especially, after

performing the search function, this difference

becomes noticeable.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service

center.

Symptoms

Causes

Remedies

The volume level is set to

the minimum level.

• Sound cannot be heard

from the speakers.

Adjust it to the optimum

level.

Connections are incorrect.

Check the cords and

connections.

The built-in microcomputer

may have functioned

• The receiver does not

work at all.

Reset the receiver (see page

2).

incorrectly due to noise, etc.

Signals are too weak.

• SSM automatic presetting

does not work.

Store stations manually.

Connect the aerial firmly.

Insert the disc correctly.

The aerial is not connected

firmly.

• Static noise while listening

to the radio.

Disc is inserted upside

down.

• Disc automatically ejects.

CD-R/CD-RW is not

finalized.

• CD-R/CD-RW cannot be

played back.

• Insert a finalized CD-R/

CD-RW.

• Tracks on the CD-R/

CD-RW cannot be

skipped.

• Finalize the CD-R/

CD-RW with the

component which you

used for recording.

Disc is locked.

• Disc can be neither played

back nor ejected.

Unlock the disc (see page

15).

The CD player may have

functioned incorrectly.

Eject the disc forcibly (see

page 2).

You are driving on rough

roads.

• Disc sound is sometimes

interrupted.

Stop playback while driving

on rough roads.

Disc is scratched.

Change the disc.

Connections are incorrect.

Check the cords and

connections.

• “NO DISC” appears on the No disc is in the loading

Insert a disc into the loading

slot.

display.

slot.

Disc is inserted incorrectly.

Insert the disc correctly.

Download from Www.Somanuals.com. All Manuals Search And Download.

Symptoms

Causes

Remedies

No MP3/WMA tracks are

recorded on the disc.

Change the disc.

• Disc cannot be played

back.

MP3/WMA tracks do not

have the extension code

<.mp3> or <.wma> in their

file names.

Add the extension code

<.mp3> or <.wma> to their

file names.

MP3/WMA tracks are not

recorded in the format

compliant with ISO 9660

Change the disc.

(Record MP3/WMA

tracks using a compliant

Level 1, Level 2, Romeo, or application.)

Joliet.

Skip to another track or

• Noise is generated.

The track played back

is not an MP3/WMA

track (although it has the

extension code <.mp3> or

<.wma>).

change the disc. (Do not add

the extension code <.mp3>

or <.wma> to non-MP3 or

WMA tracks.)

Readout time varies due to

the complexity of the folder/ hierarchies and folders.

file configuration.

Do not use too many

• A longer readout time is

required (“CHECK” keeps

flashing on the display).

Playback order is determined

when the files are recorded.

• Tracks cannot be played

back as you have intended

them to play.

This sometimes occurs

during play. This is caused

by how the tracks are

recorded on the disc.

• Elapsed playing time is not

correct.

The current disc does not

contain any MP3/WMA

tracks.

Insert a disc that contains

MP3/WMA tracks.

• “NO FILES” appears on

the display.

This receiver can only

• Correct characters are

not displayed (e.g. album

name).

display alphabets (capital:

A – Z), numbers, and a

limited number of symbols.

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

AUDIO AMPLIFIER SECTION

Maximum Power Output:

CD PLAYER SECTION

Type: Compact disc player

Front: 50 W per channel

Rear: 50 W per channel

Signal Detection System: Non-contact optical

pickup (semiconductor laser)

Continuous Power Output (RMS):

Front: 19 W per channel into 4 Ω, 40 Hz

to 20 000 Hz at no more than 0.8%

total harmonic distortion.

Number of Channels: 2 channels (stereo)

Frequency Response: 5 Hz to 20 000 Hz

Dynamic Range:

96 dB

Signal-to-Noise Ratio: 98 dB

Wow and Flutter: Less than measurable limit

MP3 Decoding Format:

Rear: 19 W per channel into 4 Ω, 40 Hz

to 20 000 Hz at no more than 0.8%

total harmonic distortion.

MPEG1/2 Audio Layer 3

Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)

Tone Control Range:

Max. Bit Rate: 320 kbps

WMA (Windows Media^®Audio) Decoding

Format:

Bass:

10 dB at 100 Hz

Treble: 10 dB at 10 kHz

Frequency Response: 40 Hz to 20 000 Hz

Signal-to-Noise Ratio: 70 dB

Line-Out Level/Impedance:

2.5 V/20 kΩ load (full scale)

Output Impedance: 1 kΩ

Max. Bit Rate: 192 kbps

GENERAL

Power Requirement:

Operating Voltage:

DC 14.4 V (11 V to 16 V allowance)

Grounding System: Negative ground

Allowable Operating Temperature:

0°C to +40°C

TUNER SECTION

Frequency Range:

FM1/FM2: 87.5 MHz to 108.0 MHz

Dimensions (W × H × D):

Installation Size (approx.):

182 mm × 52 mm × 150 mm

Panel Size (approx.):

FM3:

AM:

65.00 MHz to 74.00 MHz

(MW) 522 kHz to 1 620 kHz

(LW) 144 kHz to 279 kHz

188 mm × 58 mm × 11 mm

Mass (approx.):

[FM Tuner]

Usable Sensitivity: 11.3 dBf (1.0 µV/75 Ω)

50 dB Quieting Sensitivity:

1.3 kg (excluding accessories)

16.3 dBf (1.8 µV/75 Ω)

Alternate Channel Selectivity (400 kHz): 65 dB

Frequency Response: 40 Hz to 15 000 Hz

Stereo Separation: 30 dB

Design and specifications are subject to change

without notice.

Capture Ratio: 1.5 dB

[MW Tuner]

Sensitivity: 20 µV

Selectivity: 35 dB

[LW Tuner]

Sensitivity: 50 µV

• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft

Corporation in the United States and/or other countries.

Download from Www.Somanuals.com. All Manuals Search And Download.

Having TROUBLE with operation?

Please reset your unit

Refer to page of How to reset your unit

Затруднения при эксплуатации?

Пожалуйста, перезагрузите Ваше устройство

Для получения информации о перезагрузке Вашего

устройства обратитесь на соответствующую страницу

EN, RU

1104DTSMDTJEIN

Download from Www.Somanuals.com. All Manuals Search And Download.

KD-G317

Installation/Connection Manual

Руководство по установке/подключению

GET0261-002A

[EE]

1104DTSMDTJEIN

EN, RU

РУССКИЙ

ENGLISH

Это устройство разработано для эксплуатации на 12 В постоянного напряжения с

минусом на массе. Если Ваш автомобиль не имеет этой системы, требуется инвертор

напряжения, который может быть приобретен у дилера автомобилнего специалиста JVC.

This receiver is designed to operate on 12 V DC, NEGATIVE ground electrical systems. If

your vehicle does not have this system, a voltage inverter is required, which can be purchased

at JVC IN-CAR ENTERTAINMENT dealers.

Список деталей для установки и подключения

Следующие детали поставлены в комплекте с устройством.

После проверки комплектации, пожалуйста, установите их правильно.

Parts list for installation and connection

The following parts are provided for this receiver.

After checking them, please set them correctly.

A / B

Power cord

Кабель питания

Sleeve

Муфта

Trim plate

Декоративную панель

Hard case/Control panel

Жесткий футляр/

панель управления

Washer (ø5)

Шайба (њ5)

Lock nut (M5)

Фиксирующая гайка (M5)

Mounting bolt (M5 x 20 mm)

Крепежный болт (M5 x 20 мм)

Rubber cushion

Резиновый чехол

Handles

Рычаги

УСТАНОВКА (УСТАНОВКА В ПРИБОРНУЮ ПАНЕЛЬ)

INSTALLATION (IN-DASH MOUNTING)

На следующих иллюстрациях показана типовая установка. Если у Вас есть какие-либо

вопросы, касающиеся установки, обратитесь к Вашему дилеру автомобилнего

специалиста JVC или в компанию, поставляющую соответствующие принадлежности.

• Если Вы не знаете точно, как следует устанавливать это устройство, обратитесь к

квалифицированному специалисту.

The following illustration shows a typical installation. If you have any questions or require

information regarding installation kits, consult your JVC IN-CAR ENTERTAINMENT dealer or a

company supplying kits.

•

If you are not sure how to install this receiver correctly, have it installed by a qualified technician.

Do the required electrical connections.

Выполните необходимые

подключения контактов, как

показано на оборотной стороне

этой инструкции.

*¹When you stand the receiver, be

careful not to damage the fuse on

the rear.

*¹Устанавливайте устройство таким

образом, чтобы не повредить

предохранитель, расположенный

сзади.

Bend the appropriate tabs to hold

the sleeve firmly in place.

Отогните соответствующие

фиксаторы, предназначенные

для прочной установки корпуса.

Removing the receiver / Удаление устройства

Before removing the receiver, release the rear section.

Перед удалением устройства освободите заднюю часть.

When using the optional stay / При When installing the receiver without using the sleeve /

использовании дополнительной

стойки

При установке устройства без использования муфты

In a Toyota for example, first remove the car radio and install the receiver in its place.

В автомобилях “Toyota”, например, сначала удалите автомобильную

магнитолу, затем установите на ее место это устройство.

Stay (option)

Стойка

(дополнительно)

* Not included for this receiver.

Fire wall

Стена

Flat type screws

(M5 x 8 mm)*

* Не входят в комплект.

Крепежные винты

(M5 x 8 мм)*

Bracket*

Кронштейн*

Dashboard

Приборная

Flat type screws

(M5 x 8 mm)*

Крепежные винты

(M5 x 8 мм)*

панель

Screw (option)

Винт

(дополнительно)

Pocket

Карман

Bracket*

Кронштейн*

Insert the two handles, then

pull them as illustrated so

that the receiver can be

removed.

Вставьте два рычажка,

затем потяните их, как

показано на рисунке,

чтобы вынуть устройство.

Note

: When installing the receiver on the mounting bracket,

make sure to use the 8 mm-long screws. If longer screws

are used, they could damage the receiver.

Install the receiver at an

angle of less than 30˚.

Установите устройство

под углом менее 30°.

Примечание : При установке устройства на крепежный кронштейн,

используйте только винты длиной 8 мм. При

использовании более длинных винтов можно

повредить устройство.

TROUBLESHOOTING

BЫЯВЛЕНИЕ НЕИСПРАВНОСТЕЙ

• The fuse blows.

• Сработал предохранитель.

* Are the red and black leads connected correctly?

* Правильно ли подключены черный и красный провода?

• Power cannot be turned on.

* Is the yellow lead connected?

• Питание не включается.

* Подключен ли желтый провод?

• No sound from the speakers.

* Is the speaker output lead short-circuited?

• Звук не выводится через громкоговорители.

* Нет ли короткого замыкания на кабеле выхода громкоговорителей?

• Sound is distorted.

* Is the speaker output lead grounded?

* Are the “–” terminals of L and R speakers grounded in common?

• Звук искажен.

* Заземлен ли провод выхода громкоговорителей?

* Заземлены ли разъемы “–” правого (R) и левого (L) громкоговорителей?

• Noise interfere with sounds.

* Is the rear ground terminal connected to the car’s chassis using shorter and thicker cords?

• Шум мешает звучанию.

* Соединен ли находящийся сзади зажим заземления с шасси автомобиля с помощью

более короткого и тонкого шнуров?

• Receiver becomes hot.

* Is the speaker output lead grounded?

* Are the “–” terminals of L and R speakers grounded in common?

• Устройство нагревается.

* Заземлен ли провод выхода громкоговорителей?

* Заземлены ли разъемы “–” правого (R) и левого (L) громкоговорителей?

• This receiver does not work at all.

* Have you reset your receiver?

• Приемник не работает.

* Выполнена ли перенастройка приемника?

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

РУССКИЙ

ЭЛЕКТРИЧЕСКИЕ ПОДКЛЮЧЕНИЯ

ELECTRICAL CONNECTIONS

Для предотвращения коротких замыканий мы рекомендуем Вам отсоединить

отрицательный разъем аккумулятора и осуществить все подключения перед установкой

устройства.

To prevent short circuits, we recommend that you disconnect the battery’s negative terminal and

make all electrical connections before installing the receiver.

• Be sure to ground this receiver to the car’s chassis again after installation.

• После установки обязательно заземлите данное устройство на шасси

автомобиля.

Notes:

• Replace the fuse with one of the specified rating. If the fuse blows frequently, consult your JVC

IN-CAR ENTERTAINMENT dealer.

Примечания:

• Заменяйте предохранитель другим предохранителем указанного класса. Если

предохранитель сгорает слишком часто, обратитесь к дилеру автомобилнего

специалиста JVC.

• Рекомендуется подключать динамики с максимальной мощностью более 50 Вт (к

задней и передней панели устройства, с полным сопротивлением от 4 Ω до 8 Ω). Если

максимальная мощность динамиков менее 50 Вт, перейдите в режим “AMP GAIN”,

чтобы предотвратить их повреждение (см. ИНСТРУКЦИИ ПО ЭКСПЛУАТАЦИИ на

стр. 21).

• It is recommended to connect to the speakers with maximum power of more than 50 W (both

at the rear and at the front, with an impedance of 4 Ω to 8 Ω). If the maximum power is less

than 50 W, change “AMP GAIN” setting to prevent the speakers from being damaged (see

page 21 of the INSTRUCTIONS).

• To prevent short-circuit, cover the terminals of the UNUSED leads with insulating tape.

• The heat sink becomes very hot after use. Be careful not to touch it when removing this

receiver.

• Для предотвращения короткого замыкания заклейте НЕИСПОЛЬЗУЕМЫЕ концы

изолирующей лентой.

Heat sink

• Радиатор во время использования сильно нагревается. Старайтесь его не трогать во

время удаления устройства.

Радиатор

A Typical connections / Типичные подключения

Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause Перед началом подключений: Тщательно проверьте проводку в автомобиле.

serious damage to this receiver.

The leads of the power cord and those of the connector from the car body may be different in

color.

Неправильное подключение может привести к серьезному повреждению устройства.

Жилы силового кабеля и жилы соединителя от кузова автомобиля могут быть разного

цвета.

1 Connect the colored leads of the power cord in the order specified in the illustration below.

2 Connect the aerial cord.

1 Подсоедините цветные провода шнура питания в указанном ниже порядке.

2 Подключите кабель антенны.

3 В последнюю очередь подключите электропроводку к устройству.

Примечание: Если в Вашем автомобиле никакого вспомогательного разъема

не имеется, переставьте предохранитель из положения 1 предохранителя

(первоначальное положение) в положение 2 предохранителя и подключите красный

провод (А7) к положительному (+) полюсу аккумулятора.

3 Finally connect the wiring harness to the receiver.

Note: If your vehicle does not have any accessory terminal, move the fuse from the fuse

position 1 (initial position) to fuse position 2, and connect the red lead (A7) to the positive (+)

battery terminal.

• The yellow lead (A4) is not used in this case.

• Желтый провод (А4) в этом случае не используется.

Fuse position 2 / Положение 2 предохранителя

Fuse position 1 / Положение 1 предохранителя

Rear ground

terminal

Задний разъем

заземления

15 A fuse

Предохранитель 15 A

*¹Not included for this receiver

Ignition switch

*¹Не входит в комплект

Line out (see diagram

)

Переключатель зажигания

К выходу (см. схему

)

Aerial terminal

Разъем антенны

Black

Черный

To metallic body or chassis of the car

К металлическому корпусу или шасси автомобиля

Yellow*²

Желтый*²

To a live terminal in the fuse block connecting to the car battery

(bypassing the ignition switch) (constant 12 V)

К разъему фазы в блоке предохранителя (минуя блок зажигания)

(постоянный 12 В)

Red

Красный

To an accessory terminal in the fuse block

Fuse block

Блок

предохранителя

К вспомогательному разъему в блоке предохранителя

Before checking the operation of this

Blue with white stripe

Синий с белой полосой

receiver prior to installation, this lead must be

connected, otherwise power cannot be turned

on.

To the remote lead of other equipment or power aerial if any (200 mA max.)

К удаленному проводу другого оборудования или антенны (макс. 200 мА)

*²Перед проверкой работы устройства

подключите этот провод, иначе питание не

включится.

Brown

Коричневый

To cellular phone system

К системе сотового телефона

White with black stripe

Белый с черной

полосой

White

Gray with black stripe

Gray

Green with black stripe

Green

Purple with black stripe

Purple

Пурпурный

Белый Серый с черной

полосой

Серый Зеленый с черной

полосо

Зеленый Пурпурный с черной

полосой

Right speaker (rear)

Правый

громкоговоритель

(задний)

Left speaker (front)

Левый громкоговоритель

(передний)

Right speaker (front)

Правый громкоговоритель

(передний)

Left speaker (rear)

Левый громкоговоритель

(задний)

Connecting the external amplifier / Подключение внешнего усилителя

You can connect an amplifier to upgrade your car stereo system.

Можно подключить усилитель для обновления автомобильной стереосистемы.

• Connect the remote lead (blue with white stripe) to the remote lead of the other equipment so • Подсоедините провод внешнего устройства (синий с белой полосой) к проводу

that it can be controlled through this receiver.

• Disconnect the speakers from this receiver, connect them to the amplifier. Leave the

speaker leads of this receiver unused.

внешнего устройства другого оборудования так, чтобы им можно было управлять с

этого устройства.

• Отсоедините громкоговорители от данного устройства, подключите их

к усилителю. Оставьте провода громкоговорителей данного устройства

неиспользованными.

Rear speakers

Задние громкоговорители

*³Firmly attach the ground wire to the metallic

Remote lead

Провод внешнего устройства

Y-connector (not supplied for this receiver)

body or to the chassis of the car—to the place

not coated with paint (if coated with paint,

remove the paint before attaching the wire).

Failure to do so may cause damage to the

receiver.

Разъем Y (не входит в комплект)

JVC Amplifier

JVC-усилитель

Remote lead (Blue with white stripe)

Провод внешнего устройства (Синий с белой полосой)

*³Плотно прикрепите заземляющий провод

к металлическому кузову или шасси

автомобиля—в месте, не покрытом краской

(если оно покрыто краской, удалите

краску перед тем, как прикреплять

провод). Невыполнение этого требования

может привести к повреждению данного

устройства.

Signal cord (not supplied for this receiver)

Кабель сигнала (не входит в комплект)

To the remote lead of other equipment or power aerial if any

К удаленному проводу другого оборудования или антенны

Front speakers

Передние громкоговорители

ПРЕДОСТЕРЕЖЕНИЯ по питанию и подключению

громкоговорителей:

• НЕ подключайте провода громкоговорителей к

аккумулятору автомобиля, иначе устройство будет

повреждено.

PRECAUTIONS on power supply and speaker

connections:

• DO NOT connect the speaker leads of the power cord to

the car battery; otherwise, the receiver will be seriously

damaged.

• ПЕРЕД подключением проводов громкоговорителей

к кабелю питания громкоговорителя проверьте схему

соединений громкоговорителей в Вашем автомобиле.

• BEFORE connecting the speaker leads of the power cord to the

speakers, check the speaker wiring in your car.

Download from Www.Somanuals.com. All Manuals Search And Download.

Ingersoll Rand Marine Radio 23644 400 User Manual
Intel Computer Hardware PX865PE7 User Manual
Jenn Air Cooktop DOWNDRAFT RADIANT COOKTOP User Manual
John Deere Spreader SS1023B User Manual
Kathrein Power Supply NCF 13 User Manual
Kenwood Carpet Cleaner FS260 User Manual
King Canada Nail Gun 8234 User Manual
KitchenAid Blender FOOD GRINDER User Manual
KitchenAid Cooktop 8284670 User Manual
Kompernass Kitchen Grill KH 1140 User Manual