Интернет-магазин
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD/CD RECEIVER
KD-DV7406/KD-DV7405
For canceling the display demonstration, see page 7.
For installation and connections, refer to the separate manual.
INSTRUCTIONS
GET0532-005A
[A]
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best
possible performance from the unit.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to
qualified service personnel.
3. CAUTION: Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical
instruments.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
For safety...
• Do not raise the volume level too much, as this will
block outside sounds, making driving dangerous.
[European Union only]
• Stop the car before performing any complicated
operations.
Temperature inside the car...
Caution:
If you have parked the car for a long time in hot or cold
weather, wait until the temperature in the car becomes
normal before operating the unit.
If the temperature inside the car is below 0°C, the
movement of animation and text scroll will be halted
on the display to prevent the display from being
blurred.
appears on the display.
When the temperature increases, and the operating
temperature is resumed, these functions will start
working again.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNINGS:
(To prevent accidents and damage)
How to reset your unit
• DO NOT install any unit or wire any cable in
a location where;
– it may obstruct the steering wheel and
gearshift lever operations.
– it may obstruct the operation of safety
devices such as air bags.
– it may obstruct visibility.
• Your preset adjustments will also be erased (except the
• DO NOT operate the unit while driving.
• If you need to operate the unit while
driving, be sure to look around carefully.
• The driver must not watch the monitor
while driving.
registered Bluetooth device, see pages 26 and 27).
How to forcibly eject a disc
If the parking brake is not engaged,
“DRIVER MUST NOT WATCH THE MONITOR
WHILE DRIVING.” appears on the monitor,
and no playback picture will be shown.
– This warning appears only when the
parking brake lead is connected to the
parking brake system built in the car
(refer to the Installation/Connection
Manual).
“Please Eject” appears on the display.
• Be careful not to drop the disc when it ejects.
• If this does not work, reset your unit.
Caution on volume setting:
Digital devices (CD/USB) produce very little noise
compared with other sources. Lower the volume before
playing these digital sources to avoid damaging the
speakers by sudden increase of the output level.
Caution for DualDisc playback
The Non-DVD side of a “DualDisc” does not comply with
the “Compact Disc Digital Audio” standard. Therefore,
the use of Non-DVD side of a DualDisc on this product
may not be recommended.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
How to use the M MODE and SEL
buttons
Detaching the control panel
If you use M MODE or SEL (select), the display and some
controls (such as the number buttons,
4
/¢ buttons, 5/∞ buttons, and the
control dial) enter the corresponding control mode.
Ex.: When you press number button 1 after pressing
M MODE, to operate the FM tuner.
Avoid touching the connectors.
Attaching the control panel
To use these controls for original functions, press
M MODE again.
• However, pressing SEL makes the unit enters a
different mode.
• Waiting for about 15 seconds (or 30 seconds for
Bluetooth sources) without pressing any of these
buttons will automatically cancels the control.
Opening and closing the control
panel
Indication language:
In this manual, English indications are used
for purposes of explanation. You can select
the indication language on the monitor on the
“LANGUAGE” setting (see page 45).
Open...
Close...
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
INTRODUCTIONS
Playable disc type ...........................................................................................................................
Preparation.....................................................................................................................................
6
7
OPERATIONS
Basic operations..............................................................................................................................
• Using the control panel............................................................................................................................
• Using the remote controller (RM-RK252).................................................................................................
8
8
9
Listening to the radio...................................................................................................................... 12
Disc operations................................................................................................................................ 14
• Operations using the control panel.......................................................................................................... 15
• Operations using the remote controller (RM-RK252)............................................................................... 18
Listening to the USB device............................................................................................................. 24
Dual Zone operations ...................................................................................................................... 25
EXTERNAL DEVICES
Listening to the Bluetooth® devices................................................................................................ 26
• Using the Bluetooth cellular phone ......................................................................................................... 28
• Using the Bluetooth audio player ............................................................................................................ 30
Listening to the CD changer ............................................................................................................ 31
Listening to the iPod....................................................................................................................... 32
Listening to the other external components ................................................................................... 36
SETTINGS
Selecting a preset sound mode ....................................................................................................... 38
General settings — PSM ................................................................................................................ 40
Disc setup menu.............................................................................................................................. 45
Bluetooth settings .......................................................................................................................... 47
Title assignment ............................................................................................................................. 48
REFERENCES
Maintenance................................................................................................................................... 49
More about this unit ....................................................................................................................... 50
Troubleshooting.............................................................................................................................. 58
Specifications.................................................................................................................................. 62
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Playable disc type
Disc type
DVD
Recording format, file type, etc
DVD Video (Region Code: 4) *1
Playable
DVD Audio
DVD-ROM
DVD Recordable/Rewritable
(DVD-R/-RW *2, +R/+RW *3)
• DVD Video: UDF bridge
• DVD-VR
• DivX/MPEG-1/MPEG-2/MP3/
WMA/WAV: ISO 9660 level 1,
level 2, Romeo, Joliet
DVD Video
DVD-VR
DivX/MPEG1/MPEG2
MP3/WMA/WAV
AAC
JPEG/MPEG4
DVD+VR
DVD-RAM
Dual Disc
CD/VCD
DVD side
Non-DVD side
Audio CD/CD Text (CD-DA)/DTS-CD *4
VCD (Video CD)
SVCD (Super Video CD)
CD-ROM
CD-I (CD-I Ready)
CD-DA
CD Recordable/Rewritable
(CD-R/-RW)
• ISO 9660 level 1, level 2, Romeo,
Joliet
DivX/MPEG1/MPEG2
MP3/WMA/WAV
AAC
JPEG/MPEG4
1
*
*
If you insert a DVD Video disc of an incorrect Region Code, “REGION CODE ERROR” appears on the monitor.
DVD-R recorded in multi-border format is also playable (except for dual layer discs). DVD-RW dual layer discs are not
playable.
It is possible to play back finalized +R/+RW (Video format only) discs. +RW double layer discs are not playable.
To reproduce DTS sound, use the DIGITAL OUT terminal (see also pages 46 and 56).
2
3
4
*
*
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Cancel the display demonstration and set the clock
• See also pages 40 and 41.
Turn on the power.
1
2
Enter the PSM settings.
Cancel the display demonstrations
Select “Demo,” then “Off.”
3
Set the clock
Select “Clock Hr” (hour), then adjust the hour.
Select “Clock Min” (minute), then adjust the minute.
Select “24H/12H,” then “24Hours” or “12Hours.”
Finish the procedure.
4
Changing the display information and pattern
When the power is turned off: Check the current clock time
Ex.: When tuner is selected as the source
Source operation display
Audio level meter display
• If a station has been assigned a title, station
title appears after about 5 seconds.
(see “LevelMeter” on page 40)
• To assign a title to a station, see page 48.
INTRODUCTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Basic operations
Using the control panel
1
• TUNER: Select preset station.
• DISC/USB/CD-CH: Select title/program/
playlist/folder.
• USB-iPod: Enter the main menu [Hold].
• iPod: Enter the main menu/Pause playback/
Confirm selection.
9
• Volume control [Turn].
• Select the source [Press]*1.
TUNER = DISC*2 = USB*2 (or USB-iPod)*2
= CD-CH*2/iPod*2 (or EXT IN) =
BT-PHONE*2 = BT-AUDIO*2 = LINE IN =
AV IN = (back to the beginning)
• BT-PHONE/BT-AUDIO: Select a registered
device.
• Turn on the power.
p
q
• Select/adjust the sound mode.
• Enter the PSM settings [Hold].
• TUNER: Select preset station.
2
• Turn off the power [Hold].
• Attenuate the sound (if the power is on).
Display window
USB (Universal Serial Bus) input jack
Select the sound mode
Flip down the control panel.
• To eject the disc, flip down the control panel
then press 0 on the unit.
• DISC/USB/CD-CH: Select chapter/title/
program/folder/track/disc (for CD changer).
• BT-PHONE: Dial preset phone number*3.
• Enter functions mode.
• BT-PHONE: Activate Voice Dialing [Hold].
Change the display information and pattern.
• TUNER: Select the bands.
3
4
5
6
w
e
r
• DISC/USB/USB-iPod: Start/pause playback.
• BT-AUDIO: Start/pause playback.
7
8
AV-IN (video) input jack
• TUNER: Search for station.
• DISC/USB/USB-iPod/CD-CH/iPod: Select
chapter/track.
1
*
Holding SOURCE will enter the Bluetooth menu if a
Bluetooth phone is connected.
You cannot select these sources if they are not ready
or not connected.
• BT-AUDIO: Reverse skip/forward skip.
2
*
3
*
For storing preset phone number, see page 30.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the remote controller (RM-RK252)
Installing the battery
R03/LR03/AAA
Insert the batteries into the remote controller by
matching the polarity (+ and –) correctly.
Caution:
Battery shall not be exposed to excessive heat such as
sunshine, fire, or the like.
If the effectiveness of the remote controller
decreases, replace both batteries.
Before using the remote controller:
• Aim the remote controller directly at the remote
sensor on the unit.
• DO NOT expose the remote sensor to bright light
(direct sunlight or artificial lighting).
IMPORTANT:
If Dual Zone is activated (see page 25), the remote
controller only functions for operating the DVD/CD
player.
Remote sensor
1*1
button
• Turns the power on if pressed briefly or
attenuates the sound when the power is on.
• Turns the power off if pressed and held.
Continued on the next page
OPERATIONS
9
Download from Www.Somanuals.com. All Manuals Search And Download.
2
5/∞ buttons
3
VOL (volume) + / – buttons
• TUNER: Selects the preset stations.
• DISC:
– DVD-Video: Selects the title.
– DVD-VR: Selects the program/playlist.
– DivX/MPEG Video/MP3/WMA/WAV: Selects
the folders if included.
• Adjusts the volume level.
2nd VOL (volume) buttons
• Adjust the volume level through the 2nd AUDIO
OUT plug when pressed with SHIFT button (see
page 25).
• USB:
4* 2 ASPECT button
• Not applicable for this unit.
– DivX/MPEG Video/MP3/WMA/WAV: Selects
the folders if included.
• CD-CH: Selects the folders if included.
• IPOD:
– 5:Enters the main menu (then 5/ ∞/
5*1 PHONE button
• Answer incoming calls.
• Enters “Redial” menu when a Bluetooth phone
is connected [Hold].
4
/ ¢ work as menu
selecting buttons.)
5: Returns to the previous menu.
∞: Confirms the selection.
– ∞:Pauses or resumes playback.
6* 2 SETUP button
• Enters disc setup menu (during stop).
4
/ ¢ buttons
7* 2 TOP M (menu) button
• TUNER:
• DVD-Video/DivX: Shows the disc menu.
• DVD-VR: Shows the Original Program screen.
• VCD: Resumes PBC playback.
– Searches for stations automatically if pressed
briefly.
– Searches for stations manually if pressed and
held.
• USB-iPod: Enters the search mode menu (see
page 34).
• DISC/USB/USB-iPod/CD-CH:
– Reverse skip/forward skip if pressed briefly.
– Reverse search/forward search if pressed and
held.
8* 2 OSD (on-screen display) button
• Shows the on-screen bar.
• BT-AUDIO: Reverse skip/forward skip if pressed
briefly.
• IPOD:
– Reverse skip/forward skip if pressed briefly.
– Reverse search/forward search if pressed and
held.
9
p
q
SHIFT button
• Functions with other buttons.
DISP (display) button
• Changes the display information.
In menu selecting mode:
1/ ¡ buttons
– Selects an item if pressed briefly. (Then, press
∞ to confirm the selection.)
– Skips 10 items at a time if pressed and held.
• DVD-Video: Slow motion playback (during
pause).
• DVD-VR/VCD: Forward slow motion playback
(during pause).
• DISC/USB/USB-iPod: Reverse search/forward
search.
w*1 SOURCE button
• Selects the source.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
e
r
3 (play) / 8 (pause) button
• DISC/USB/USB-iPod/BT-AUDIO: Starts/pauses
playback.
DIRECT button
• DISC/USB: Enters direct search mode for
chapter/title/program/playlist/folder/track
when pressed with SHIFT button (see page 18
for details).
(end call) button
• Ends the call.
CLR (clear) button
BAND/ 7 (stop) buttons
• TUNER: Selects the bands.
• DISC/USB/USB-iPod/BT-AUDIO: Stops
playback.
• DISC/USB: Erases the misentry when pressed
with SHIFT button.
1
2
*
When Dual Zone is activated, these buttons cannot be
used.
Functions as number buttons/* (asterisk)/# (hash)
when pressed with SHIFT button.
TUNER: Selects the preset stations (1 – 6).
DISC: Enters chapter/title/program/playlist/folder/
t* 2 RETURN button
• VCD: Returns to the PBC menu.
• USB-iPod: Returns to Control Screen.
*
–
–
y* 2 MENU button
• DVD-Video/DivX: Shows the disc menu.
• DVD-VR: Shows the Playlist screen.
• VCD: Resumes PBC playback.
• USB-iPod: Enters the search mode menu (see
page 34).
track number after entering search mode by
pressing SHIFT and DIRECT (see page 18 for details).
u* 2 %/ fi buttons
• DVD-Video: Makes selection/settings.
• CD-CH: Changes discs in the magazine.
@/ # buttons
• DVD-Video: Makes selection/settings.
• DivX/MPEG Video: Skips back or forward by
about five minutes.
ENT (enter) button
• Confirms selection.
i* 2 DUAL button
• Activates or deactivates Dual Zone.
o
SURROUND button
• Not applicable for this unit.
OPERATIONS
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the radio
Select “TUNER.”
1
Select the bands.
2
Search for a station to listen—Auto Search.
Manual Search: Hold either one of the buttons until “M” lights up on the display, then
press it repeatedly.
3
• When receiving an FM stereo broadcast with sufficient signal strength,
on the display.
lights up
When an FM stereo broadcast is
hard to receive
FM station automatic presetting
—SSM (Strong-station Sequential
Memory)
1
2
You can preset up to six stations for each band.
1
2
3
While listening to a station...
Reception improves, but stereo effect will be lost.
•
lights up on the display.
3
Exit from the setting.
Local FM stations with the strongest signals are
searched and stored automatically in the selected
FM band.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual presetting
Ex.: Storing FM station of 92.5 MHz into preset number
4 of the FM1 band.
Using the number buttons
4
5
Select the preset number you want to store
into.
1
2
• You can move to the lists of the other FM bands
by pressing number button 5 (
6 ( ) repeatedly.
) or
Store the station.
3
Preset number flashes for a while.
Listening to the preset station on
the Preset Station List
Using the Preset Station list
• When
is shown on the display, you can
1
2
Display the Preset Station List, then select
the preset station you want to listen to.
move back to the previous screen by pressing number
button 3.
1
Follow steps 1 and 2 of “Using the number
buttons” above.
Change to the selected station.
• By holding 5 / ∞, the Preset Station List will
also appear (go to step 4).
2
3
Display the Preset Station List.
OPERATIONS
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc operations
Before performing any operations...
Turn on the monitor to watch the playback picture. If you turn on the monitor, you can also control playback of other
discs by referring to the monitor screen. (See pages 20 – 23.)
The disc type is automatically detected, and playback starts automatically (for DVD: automatic start depends on its
internal program).
If the current disc does not have any disc menu, all tracks will be played repeatedly until you change the source or
eject the disc.
If “ ” appears on the monitor when pressing a button, the unit cannot accept the operation you have tried to
do.
• In some cases, without showing “ ,” operations will not be accepted.
Open the control panel.
1
Make sure to detach the USB device before opening the control
panel, as it might block the opening mechanism.
• To detach the USB device, see page 24.
Insert the disc.
Playback starts automatically.
2
Start playback if necessary.
3
To stop play and eject the disc
Prohibiting disc ejection
• Press SOURCE to listen to another playback source.
To cancel the prohibition, repeat the same
procedure.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations using the control panel
Pressing (or holding) the following buttons allows you to...
Disc type
(Number buttons)*3
[Press] Select chapter
[Hold] Reverse/fast-forward
chapter*1
Select title
During stop: Locate title
During play/pause: Locate
chapter
[Press] Select chapter
[Hold] Reverse/fast-forward
chapter*1
Select program number/ During stop: Locate program
playlist number
During play/pause: Locate
chapter
[Press] Select track
[Hold] Reverse/fast-forward track*2
Select folder
Locate particular folder directly
[Press] Select track
[Hold] Reverse/fast-forward track*1
Locate particular track directly
(PBC not in use)
—
[Press] Select track
[Hold] Reverse/fast-forward track*1
Select folder
Locate particular folder directly
[Press] Select track
[Hold] Reverse/fast-forward track*1
Locate particular track directly
—
1
2
3
*
*
*
Search speed:
Search speed:
Press to select number 1 to 6; hold to select number 7 to 12.
Continued on the next page
OPERATIONS
15
Download from Www.Somanuals.com. All Manuals Search And Download.
After pressing M MODE, press the following buttons to...
Disc type
Skip 10 chapters (during
play or pause)
Repeat Chapter:
Repeat current chapter
Repeat Title:
—
—
Repeat current title
Skip 10 chapters (during
play or pause)
Repeat Chapter:
Repeat current chapter
Repeat Program:
Repeat current program (not
available for Playlist Playback)
Skip 10 tracks (within the
same folder)
Repeat Track:
Repeat current track
Repeat Folder:
Random Folder:
Randomly play all tracks of
current folder, then tracks of
next folders
Repeat current folder
Random All:
Randomly play all tracks
Skip 10 tracks (PBC not in
use)
Repeat Track:
Random All:
Repeat current track (PBC not in Randomly play all tracks (PBC
use)
not in use)
Skip 10 tracks (within the
same folder)
Repeat Track:
Repeat current track
Repeat Folder:
Random Folder:
Randomly play all tracks of
current folder, then tracks of
next folders
Repeat current folder
Random All:
Randomly play all tracks
Skip 10 tracks
Repeat Track:
Random All:
Repeat current track
Randomly play all tracks
• You can also cancel the playback mode by selecting “Off” or press number button 4 (
).
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a folder/track on the list
(only for MP3/WMA/WAV file)
5
Change to the selected item.
A
If File List is selected
The list disappears and playback
• When
is shown on the display, you can
move back to the previous screen by pressing number
button 3.
starts.
1
B
If Folder List is selected
2
Select “LIST.”
• If the current folder is selected, File List
appears, then repeat steps 4 and 5 A to
start playback.
3
Select the list type.
• If another folder is selected, playback starts
from the 1st file of the selected folder.
4
Select an item.
Ex.: When “File” is selected in step 3
• You can move to the other lists by pressing
number button 5 (
repeatedly.
) or 6 (
)
OPERATIONS
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations using the remote controller (RM-RK252)
Disc
/
Button
Stop play
Stop play
Start play/Pause (if pressed during play)
Start play/Pause (if pressed during play)
• Reverse/forward chapter search*1 (No
sound can be heard.)
• Slow motion*2 during pause (No sound can
be heard.)
Reverse/forward track search*4 (No sound can
be heard.)
* DVD-VR: Reverse slow motion does not work.
[Press] Select chapter (during play or pause)
[Press] Select track (during play or pause)
[Hold] Reverse/fast-forward chapter search*3 [Hold] Reverse/fast-forward track search*5
(No sound can be heard.)
• DVD-Video: Select title (during play or
pause)
Select folder
• DVD-VR: Select program/playlist (during
play or pause)
• Skip back or forward the scenes by about
five minutes
—
• Select chapter
To search for chapter/title/program/playlist/folder/track directly (DVD/DivX/MPEG Video/VCD/
MP3/WMA/WAV/CD)
1
While holding SHIFT, press DIRECT repeatedly to select the desired search mode.
DVD-Video
DVD-VR
:
:
VCD :
CD
:
DivX/MPEG Video :
MP3/WMA/WAV
:
2
3
While holding SHIFT, press the number buttons (0 – 9) to enter the desired number.
Press ENT (enter) to confirm.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Stop play
Stop play
Stop play
Start play/Pause (if pressed during Start play/Pause (if pressed during Start play/Pause (if pressed during
play)
play)
play)
Reverse/forward track search*1
• Forward slow motion*2 during
pause. (No sound can be heard.)
* Reverse slow motion does not work.
Reverse/forward track search*1
Reverse/forward track search*1
[Press] Select track (during play or [Press] Select track (during play or [Press] Select track (during play or
pause) pause) pause)
[Hold] Reverse/fast-forward track [Hold] Reverse/fast-forward track [Hold] Reverse/fast-forward track
search*3 (No sound can be
search*3
search*3
heard.)
Select folder
—
—
—
—
—
• For DivX/MPEG Video/MP3/WMA/WAV, track is searched within the same folder.
• To erase a misentry, press CLR (clear) while holding SHIFT.
• To return to the previous screen, press RETURN.
1
*
*
*
*
*
Search speed:
Slow motion speed:
Search speed:
Search speed:
Search speed:
2
3
4
5
Continued on the next page
OPERATIONS
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Using menu driven features... (DVD-Video/
DVD-VR)
Operations using the
on-screen bar
(DVD/DVD-VR/DivX/MPEG Video/VCD)
These operations are possible on the monitor using the
remote controller.
1
2
Press TOP M/MENU to enter the menu screen.
Press %/ fi/ @* / #* to select an item you want
to start play.
3
Press ENT (enter) to confirm.
1
2
3
Show the on-screen bar (see page 21).
* Not applicable for DVD-VR.
(twice)
Canceling the PBC playback... (VCD)
Select an item.
1
2
During stop, press DIRECT while holding SHIFT.
Hold SHIFT, then press the number buttons (0 – 9)
to enter the desired number.
3
Press ENT (enter) to confirm.
Make a selection.
If pop-up menu appears...
• To resume PBC, press TOP M/MENU.
• To cancel pop-up menu, press RETURN.
• For entering time/numbers, see the following.
Entering time/numbers
Press %/ fi to change the number, then press @/ # to
move to the next entry.
• Each time you press %/ fi, the number increases/
decreases by one value.
• After entering the numbers, press ENT (enter).
• It is not required to enter the zero and tailing zeros
(the last two digits in the example below).
Ex.: Time search
DVD: _:_ _:_ _ (Ex.: 1:02:00)
Press % once, then # twice to go to the third entry, %
twice, then press ENT (enter).
To remove the on-screen bar
20
Download from Www.Somanuals.com. All Manuals Search And Download.
On-screen bar
Ex.: DVD-Video
Information
Operation
6
7
Playback status
Play
1
2
Disc type
• DVD-Video/DTS-CD: Audio signal format type
Forward/reverse search
Forward/reverse slow-motion
Pause
Stop
and channel
• VCD:PBC
Playback mode*1
DVD-Video:
DVD-VR:
3
T. RPT: Title repeat
Operation icons
C. RPT: Chapter repeat
C. RPT: Chapter repeat
PG. RPT: Program repeat
Change time indication (see 5)
Time Search (Enter the elapsed playing
time of the current title/program/
playlist or of the disc.)
DivX/MPEG Video: T. RPT: Track repeat
F. RPT: Folder repeat
Title Search (by its number)
Chapter Search (by its number)
Track Search (by its number)
Change the audio language or audio
channel
F. RND: Folder random
A. RND: All random
T. RPT: Track repeat
A. RND: All random
VCD*2:
4
Playback information
Current title/chapter
Change or turn off the subtitle
language
Current program/chapter
Change the view angle
Current playlist/chapter
Repeat play*1
Random play*1
Current track
Current folder/track
Time indication
1
5
*
For repeat play/random play, see also page 16.
While PBC is not in use.
2
Elapsed playing time of the disc
(For DVD-Video/DVD-VR, elapsed
playing time of the current title/
program/playlist.)
*
3
*
Not applicable for DVD-VR.
DVD-Video/DVD-VR: Remaining
title/program/playlist time
VCD: Remaining disc time
Elapsed playing time of the current
chapter/track*3
Remaining time of the current
chapter/track*3
OPERATIONS
21
Download from Www.Somanuals.com. All Manuals Search And Download.
7
8
Track information
Track list with the current track selected
Operations using the control
screen
(DivX/MPEG Video/MP3/WMA/WAV/CD)
These operations are possible on the monitor using the
remote controller.
To select a playback mode
1
While control screen is displayed...
1
Show the control screen.
DivX/MPEG Video: Press 7 during play.
MP3/WMA/WAV/CD: Automatically appear during
play.
Playback mode selection screen appears on the
folder list section of the control screen.
Select a playback mode.
2
3
2
3
4
Select “Folder” column or “Track” column
(except for CD).
Select an item.
REPEAT:
Select a folder or track.
RANDOM:
Start playback.
DivX/MPEG Video: Press ENT (enter) or 3/8.
MP3/WMA/WAV/CD: Playback starts automatically.
Mode
Playback functions
F. RPT
Repeat current folder
(folder repeat):
T. RPT
(track repeat):
Repeat current track
Control screen
A. RND
Randomly play all tracks
(all random):
F. RND
Randomly play all tracks of
(folder random): current folder, then tracks of
next folders
4
Confirm the selection.
Ex.: MP3/WMA/WAV disc
* Not selectable for CD.
1
2
3
4
5
6
Current folder number/total folder number
Folder list with the current folder selected
Selected playback mode
Elapsed playing time of the current track
Operation mode icon ( 3, 7, 8, ¡, 1 )
Current track number/total number of tracks in the
current folder (total number of tracks on the disc)
22
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Current page/total number of the pages included
in the list
Current folder/track (highlighted bar)
Operations using the list
screen
(DVD-VR/DivX/MPEG Video/MP3/WMA/WAV)
These operations are possible on the monitor using the
remote controller.
List screen (DVD-VR)
You can use ORIGINAL PROGRAM or PLAY LIST screen
anytime while playing DVD-VR with its data recorded.
List screen (DivX/MPEG Video/MP3/WMA/
WAV)
1
Select a list screen.
Before playing, you can display the folder list/track list
to confirm the contents and start playing a track.
1
Display the folder list while stop.
2
Select an item from the folder list.
• Track list of the selected folder appears.
• To go back to the folder list, press RETURN.
3
Select a track to start playing.
or
1
2
3
Program/playlist number
Recording date
Recording source (TV station, the input
terminal of the recording equipment, etc.)
Start time of recording
Title of the program/playlist*
Current selection (highlighted bar)
Creating date of playlist
• MP3/WMA/WAV: Control screen appears (see
page 22).
4
5
6
7
8
9
Number of chapters
Playback time
* The title of the original program or playlist may
not be displayed depending on the recording
equipment.
Ex.: Folder list
2
Select an item from the list.
1
2
Current folder number/total folder number
Current track number/total number of tracks in the
current folder
OPERATIONS
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the USB device
You can connect a USB mass storage class device such as a USB memory, portable HDD, etc. to the unit.
• You can also connect an Apple iPod to the USB input jack. For details of the operations, see pages 32 – 36.
This unit can play DivX/MPEG Video/MP3/WMA/WAV tracks stored in a USB device.
All tracks will be played repeatedly until you change the source or detach the USB device.
USB input jack
1
2
USB memory
Turn on the monitor to watch the playback picture if
you play back a DivX/MPEG file. You can also control
playback by referring to the monitor screen. (See also
pages 20 – 23.)
You can operate the USB device in the same way you
operate the files on a disc. (See pages 15 – 23.)
• You cannot select “USB” when Dual Zone is in use
(see page 25).
• See pages 18 – 23 for operation using the remote
controller.
• See pages 45 and 46 for more settings.
Cautions:
• Avoid using the USB device if it might hinder your
safety driving.
• Do not pull out and attach the USB device repeatedly
while “Reading” is shown on the display.
• Do not start the car engine if a USB device is
connected.
• This unit may not be able to play the files depending
on the type of USB device.
• Operation and power supply may not work as
intended for some USB devices.
If “ ” appears on the monitor when pressing a
button, the unit cannot accept the operation you
have tried to do.
• In some cases, without showing “ ,” operations
will not be accepted.
If a USB device has been attached...
Playback starts from where it has
been stopped previously.
• You cannot connect a computer to the USB input
terminal of the unit.
• Make sure all important data has been backed up to
avoid losing the data.
• If a different USB device is
currently attached, playback starts
from the beginning.
• Do not leave a USB device in the car, expose to direct
sunlight, or high temperature to avoid deformation
or cause damages to the device.
To stop play and detach the USB device
Straightly pull it out from the unit.
• Press SOURCE to listen to another playback source.
• Some USB devices may not work immediately after
you turn on the power.
• For more details about USB operations, see pages 51
and 52.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Zone operations
You can enjoy disc playback on the external monitor connected to the VIDEO output terminal and 2nd AUDIO OUT
plugs while listening to any source (other than “AM” and “USB”) through the speakers.
• You cannot select “AM” or “USB” as the source when Dual Zone is activated.
• When Dual Zone is in use, you can only operate the DVD/CD player using the remote controller. For operations, see
pages 18 – 23.
These operations are possible on the monitor using the remote controller.
Activate Dual Zone.
• DUAL indicator lights up on the display.
1
The main source automatically changes to “DISC.”
To select a different source (main source) to listen through the speakers,
press SOURCE on the control panel.
• By using the buttons on the control panel, you can operate the newly
selected source without affecting Dual Zone operations.
Adjust the volume through the 2nd AUDIO OUT plug.
2
Operate the DVD/CD player using the remote controller by
referring to the monitor screen.
3
—
To cancel Dual Zone operations
On the control panel:
1
2
Enter Dual Zone settings.
Activate or deactivate Dual Zone.
• DUAL indicator goes off.
The source automatically changes to “DISC” when
Dual Zone is activated.
OPERATIONS
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the Bluetooth® devices
For Bluetooth operations, it is required to connect the
Bluetooth Adapter (KS-BTA200) to the CD changer
jack on the rear of this unit.
Registering using “Open”
Preparation: Operate the device to turn on its
Bluetooth function.
• Refer also to the instructions supplied with the
Bluetooth adapter and the Bluetooth device.
• Refer to the list (included in the box) to check
the countries where you may use the Bluetooth®
function.
1
Select “BT-PHONE” or “BT-AUDIO.”
To use a Bluetooth device through the unit
(“BT-PHONE” and “BT-AUDIO”) for the first time,
you need to establish Bluetooth wireless connection
between the unit and the device.
2
Select “New.”
• Once the connection is established, it is registered in
the unit even if you reset your unit. Up to five devices
can be registered in total.
• Only one device can be connected at a time for each
source (“BT-PHONE” and “BT-AUDIO”).
3
4
Enter setting menu.
Select “Open.”
Registering a Bluetooth device
Registration (Pairing) methods
Use either of the following items in the Bluetooth menu
to register and establish the connection with a device.
• Select “BT-PHONE” or “BT-AUDIO” as the source to
operate the Bluetooth menu.
5
Enter a PIN (Personal Identification Number)
code to the unit.
• You can enter any number you like (1-digit to
16-digit number). [Initial: 0000]
• To enter a PIN code less than 4-digit, firstly
delete the initial PIN code (0000) by pressing
Open
Make the unit ready to establish a new
Bluetooth connection.
Connection is established by operating the
Bluetooth device.
Search Make the unit ready to establish a new
Bluetooth connection.
number button 5 (
) .
* Some devices have their own PIN code. Enter the
specified PIN code to the unit.
Connection is established by operating
the unit.
1
Move to the next (or previous) number
position.
• When
is shown on the display, you can
move back to the previous screen by pressing number
button 3.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Select a number or blank space.
2
3
Select a device you want to connect.
• For available devices...
1 Enter the specific PIN code of the device to
the unit.
3
4
Repeat steps 1 and 2 until you finish
entering a PIN code.
Confirm the entry.
Refer to the instructions supplied with the
device to check the PIN code.
“Open...” flashes on the display.
2 Use the Bluetooth device to connect.
Now connection is established and you can
use the device through the unit.
6
Use the Bluetooth device to search and
connect.
On the device to be connected, enter the same
PIN code you have just entered for this unit.
“Connected (and device name)” appears on the
display.
• For special device...
Use “Open” or “Search” to connect.
Connecting/disconnecting/deleting a
registered device
Now connection is established and you can use the
device through the unit.
1
Select “BT-PHONE” or “BT-AUDIO.”
The device remains registered even after you
disconnect the device. Use “Connect“ (or activate
“Auto Connect”) to connect the same device from
next time on. (See the following and page 47.)
2
Select a registered device you want to
connect/disconnect/delete.
Connecting a device
Perform steps 1 – 3 on page 26, then...
1
• Select “Search” to search for available
devices.
The unit searches and displays the list of the
available devices.
If no available device is detected, “Device not
found” appears.
3
4
Enter setting menu.
• Select “Special” to connect a special device.
The unit displays the list of the preset devices.
• Select “Connect” or “Disconnect” to
connect/disconnect the selected device.
Continued on the next page
EXTERNAL DEVICES 27
Download from Www.Somanuals.com. All Manuals Search And Download.
• Select “Delete,” then confirm the selection.
Press number button 3 to
select “No” or return to the
previous screen.
You can set the unit to connect the Bluetooth device automatically when the unit is turned on. (See
“Auto Connect” on page 47.)
Using the Bluetooth cellular phone
Select “BT-PHONE.”
1
Enter Bluetooth menu.
2
Establish the connection with a device, then make a call (or settings
using the Bluetooth menu). (See pages 29 and 47.)
3
—
When a call comes in....
When a text message comes in....
The source is automatically changed to “BT-PHONE.”
If the cellular phone is compatible with Text Message
(notified through JVC Bluetooth adapter) and “Message
Info” is set to “Auto” (see page 47), the unit rings and
“Received Message” appears on the display to inform
you of the message arrival.
When “Auto Answer” is activated....
The unit answers the incoming calls automatically, see
page 47.
• When “Auto Answer” is deactivated, press any
button (except
incoming call.
/control dial) to answer the
To end the call
Hold any button (except
/control dial).
• You can adjust the microphone volume level (see
page 47).
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Making a call
You can make a call using one of the Dial Menu items.
* Displayed only when your cellular phone is
equipped with these functions.
• When
is shown on the display, you can
– If not displayed, try to transfer the phone book
memory of the cellular phone to this unit.
(Refer to the instruction manual supplied with
your cellular phone.)
– With some cellular phones, the phone book
memory is transferred automatically.
move back to the previous screen by pressing number
button 3.
1
Select “BT-PHONE.”
5
Select the name/phone number you want to
call.
2
3
Enter setting menu.
Select “Dial Menu.”
How to enter phone number
Select a number.
4
Select the method to make a call.
Move the entry position.
Confirm the entry.
• Redial*: Shows the list of the phone numbers
you have dialed. Go to the following step.
• Received*: Shows the list of the received calls.
Go to the following step.
• Phonebook*: Shows the phone book of the
connected cellular phone. Go to the following
step.
• Missed*: Shows the list of the missed calls. Go
to the following step.
• Number: Shows the phone number entry
screen. See “How to enter phone number” on the
right column.
• Voice Dial (Only accessible when the connected
cellular phone has the voice recognition system):
Speak the name (registered words) you want to
call.
Continued on the next page
EXTERNAL DEVICES 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Using voice command
2
3
Select a phone number.
You can also enter a new phone
1
“Say...” appears on the display.
number (see also “How to enter
phone number” on page 29) to store.
2
Speak the name (registered words) you want
to call.
Select a preset number to store.
• You can also use voice command from the Dial
Menu. Select “Voice Dial” from the Dial Menu.
• If your cellular phone does not support the voice
recognition system, “Error” appears on the
display.
To call a preset number
While in Bluetooth phone....
Presetting the phone number
You can preset up to six phone numbers.
• When is shown on the display, you can
move back to the previous screen by pressing number
button 3.
Display the phone number you want to
preset by using one of the “Dial Menu” items.
1
Using the Bluetooth audio player
• Operations and display indications differ depending on their availability on the connected audio player.
Select “BT-AUDIO.”
If playback does not start automatically, operate the Bluetooth audio player to start playback.
• If playback does not pause when you change the source, operate the Bluetooth audio player to
pause playback.
• Refer also to pages 27 and 28 for connecting/
Reverse skip/forward skip
disconnecting/deleting a registered device.
Start/pause playback
Bluetooth Information:
If you wish to receive more information about
Bluetooth, visit the following JVC web site: <http://
www.jvc-victor.co.jp/english/car/>.
Enter setting menu (Device list)
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the CD changer
It is recommended to use a JVC MP3-compatible CD changer with your unit. You can connect a CD changer to the
CD changer jack on the rear of the unit.
• You can only play conventional CDs (including CD Text) and MP3 discs.
Preparation: Make sure “Changer” is selected for the external input setting, see page 42.
Select “CD-CH.”
1
Select a disc to start playing.
[Press] For selecting disc number 1 – 6.
[Hold] For selecting disc number 7 – 12.
2
After pressing M MODE, press the following buttons to...
[Press] Select track
Skip 10 tracks
[Hold] Reverse/fast-forward track
MP3: Within the same folder
*
MP3: Select folders
Repeat Track:
Repeat current track
Repeat Folder:
MP3: Repeat all tracks of current
folder
* By holding either one of the buttons, you can display
the Disc List (see page 17).
Repeat Disc:
Repeat all tracks of the current disc
To select a disc/folder/track on the list
See “Selecting a folder/track on the list (only for MP3/
WMA/WAV file)” on page 17.
Select “Disc” in step 3 to display the Disc List of the CD
changer.
Random Folder:
MP3: Randomly play all tracks of
the current folder, then tracks of the
next folder
Random Disc:
Randomly play all tracks of current
disc
Random All:
Randomly play all tracks of the discs
in the magazine
• You can also cancel the playback mode by selecting
“Off” or press number button 4 (
).
EXTERNAL DEVICES 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the iPod
You can connect an Apple iPod using the following cable or adapter:
To:
Cable or adapter:
Connect to:
Listen to the
music
USB 2.0 cable (supplied for the iPod)
USB input jack on the control panel
Interface adapter for iPod, KS-PD100
(not supplied)
CD changer jack on the rear of the unit
Preparation: Make sure “Changer” is selected for
the external input setting, see page 42.
Watch the video USB Audio and Video cable for iPod,
KS-U19 (not supplied)
USB input jack and AV-IN input jack on the control
panel
• Turn on the monitor to watch the video.
• You can control playback from the unit.
• Disconnecting the iPod will stop playback. Press SOURCE to listen to another playback source.
• For details, refer also to the manual supplied for your iPod.
• See also page 53.
Caution:
• Avoid using the iPod if it might hinder your safety while driving.
• Make sure all important data has been backed up to avoid losing the data.
When connecting with the USB cable
Connect using USB 2.0 cable (supplied for iPod): Connect using USB Audio and Video cable for
iPod, KS-U19 (not supplied):
AV-IN input jack
USB input jack
USB input jack
USB cable supplied
for your iPod
KS-U19 (not supplied)
Playback starts automatically from where it had been paused previously.*
* Not applicable for video files.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations using the control
screen
[Press] Go to the next or previous
track
[Hold] Fast-forward or reverse the
track during playback
• These operations are possible on the monitor using
the remote controller.
[Hold] Enter main menu
• Connect your iPod to the USB input jack on the
control panel using the USB cable supplied for your
iPod, or KS-U19 for watching video file.
[Press] Pause/resume playback.
1
Turn on the monitor.
Selecting a track from the menu
1
2
3
Enter the main menu.
Select the desired menu.
Confirm the selection.
Control screen appears on the monitor.
1
2
Current category number/total category
number
Category list with the current category
selected
3
4
5
Elapsed playing time of the current track
Operation mode icon ( 3, 7, 8, ¡, 1 )
Current track number/total number of tracks
in the current category
Track information
Track list with the current track selected
• By holding ¢ , you can start play back the
selected item directly.
• By holding 4 , you can exit from the menu.
• By holding 5/∞, you can fast skip in every layer of
the main menu.
6
7
Menu items:
For Music:
“Playlists,” “Artists,” “Albums,” “Songs,” “Podcasts,”
“Genres,” “Composers,” or “Audiobooks”
For Videos:
“Video Playlists,” “Movies,” “Music Videos,” “TV Shows,”
or “Video Podcasts”
• If a track is selected, playback starts automatically.
• If the selected item has another layer, you will enter
the layer. Repeat steps 2 and 3 until the desired track
is played.
Continued on the next page
EXTERNAL DEVICES 33
Download from Www.Somanuals.com. All Manuals Search And Download.
• To return to the previous search mode screen,
press MENU.
2
Select the desired item.
• To return to the control screen, press RETURN.
To select a playback mode/change the speed
of the Audiobooks
If the selected item has another layer, you will
enter the layer. Repeat this step until the desired
track is played.
1
While control screen is displayed...
To select a track from Search Mode
Playback mode selection screen appears on the
category list section of the control screen.
1
Enter Search Mode menu.
or
2
3
Select an item.
Select a playback mode/speed.
REPEAT:
RANDOM:
2
3
Select an menu item.
AUDIO BOOK:
• Selecting Shuffle Songs starts playback.
REPEAT ONE
REPEAT ALL
Same as “Repeat One.”
Same as “Repeat All.”
Same as “Shuffle Albums.”
Select a search mode category, then the desired
track/video.
RANDOM
ALBUMS*
RANDOM
SONGS
Same as “Shuffle Songs.”
NORMAL
FASTER
SLOWER
Plays at normal speed.
Plays faster.
Search modes category:
For Music:
“Playlists,” “Artists,” “Albums,” “Songs,” “Podcasts,”
“Genres,” “Composers,” or “Audiobooks”
For Videos:
Plays slower.
* Functions only if you select “All Albums” or “All” in
“Albums” of the main “MENU.”
“Video Playlists,” “Movies,” “Music Videos,”
“TV Shows,” or “Video Podcasts”
• Available Search Modes depend on the type of your
iPod.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Confirm the selection.
Selecting a track from the menu
1
2
Enter the main menu.
• You can also change the settings from the PSM
(Preferred Setting Mode) items. See “AudioBooks” on
page 42.
Select the desired menu.
When connecting with the
interface adapter
Playlists Ô Artists Ô Albums Ô Songs Ô
Genres Ô Composers
CD changer jack
3
Confirm the selection.
• By holding 4 /¢ , you can fast skip
during song search in the main menu.
• If a track is selected, playback starts automatically.
• If the selected item has another layer, you will enter
the layer. Repeat steps 2 and 3 until the desired track
is played.
Selecting the playback modes
Playback starts automatically from where it had been
paused previously.
• If an iPod has been connected, press SOURCE to select
“iPod” to listen to music.
After pressing M MODE, press the following buttons
to...
Repeat One:
Same as “Repeat One.”
Repeat All:
Same as “Repeat All.”
Repeat Off:
Cancels.
Random Album*2:
Same as “Shuffle Albums.”
Random Song:
Same as “Shuffle Songs.”
Random Off:
[Press] Go to the next or previous
track
[Hold] Fast-forward or reverse the
track during playback
[Press] Enter main menu when you
press 5. Pause/resume
1
*
playback when ∞ is pressed.
Cancels.
1
2
*
*
Not applicable for video files.
Functions only if you select “All Albums” or “All” in
“Albums” of the main “MENU.”
Continued on the next page
EXTERNAL DEVICES 35
Download from Www.Somanuals.com. All Manuals Search And Download.
The menu selecting mode will be canceled:
• If no operations are performed for about:
– 5 seconds for iPod connected through KS-PD100.
– 15 seconds for iPod connected to the USB input
jack.
• When you confirm the selection of a track.
Listening to the other external components
You can connect an external component to:
• CD changer jack on the rear of this unit using the following adapters:
– Line Input Adapter, KS-U57
– AUX Input Adapter, KS-U58
Preparation: Make sure “Ext In” is selected for the external input setting, see page 42.
• AV-IN (video) input jack on the control panel.
Preparation: Make sure to connect and turn on the monitor to watch the playback picture. If the parking brake
is not engaged, “Parking Brake” appears on the display and no playback video on the monitor. For connection, see
Installation/Connection Manual (separate volume).
• LINE IN terminals on the rear of this unit.
Select “EXT IN,” “LINE IN,” or “AV IN.”
1
Turn on the connected component and start playing the source.
Adjust the volume.
—
—
2
3
Adjust the sound as you want (see pages 38 and 39).
4
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting an external component to the AV-IN input jack
Portable Video/Audio
player*
AV mini plug cable (supplied)
* Portable Video/Audio player of this pin-allocation can be connected:
1
2
3
4
Audio (R)
Video
GND
GND
Video
Audio (L)
Camcorder
Audio (R) Audio (L)
Audio (R) Audio (L)
iPod, etc.
AUX
GND
EXTERNAL DEVICES 37
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a preset sound mode
You can select a preset sound mode suitable to the music genre (iEQ: intelligent equalizer).
Select “EQ.”
1
2
Select “On.”
• If “Bypass” is selected, you can listen to the original
sound mode recorded.
display.
lights up on the
Select a preset sound mode.
3
Preset value setting for each sound mode
Sound mode
Preset value
Band 1 (100 Hz) Band 2 (320 Hz) Band 3 (1 kHz) Band 4 (3.2 kHz) Band 5 (10 kHz)
USER
ROCK
CLASSIC
POPS
HIP HOP
JAZZ
0
0
0
0
0
0
–2
+1
0
0
+1
0
+2
+1
+2
+3
+2
0
+4
+3
+2
+2
+1
+1
+2
+1
+1
+1
0
+2
Adjusting the sound
You can adjust the sound characteristics to your
preference.
3
Adjust the selected setting item.
A
Fad/Bal (Fader/Balance)
1
Press number button 1 (
)
to move to the “Fad/Bal” adjustment
display.
• When
is shown on the display, you can
move back to the previous screen by pressing number
button 3 or 6.
2
Adjust the speaker output balance by
pressing:
1
5 / ∞: between the front and rear
speakers. [F6 to R6]
4
/¢ : between the left and
right speakers. [L6 to R6]
Subwoofer
2
B
1
Press number button 1 (
) to
move to the “Subwoofer” adjustment
display.
• For “EQ” setting, see above.
2
Use 4 /¢ to select a cutoff
frequency to the subwoofer.
• Off*: All signals are sent to the
subwoofer.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
• 55Hz: Frequencies higher than 55 Hz
are cut off.
• 85Hz: Frequencies higher than 85 Hz
are cut off.
• 120Hz: Frequencies higher than 120 Hz
are cut off.
Turn the control dial to adjust the
subwoofer output level. [0 to 8]
Storing your own sound modes
You can adjust the sound modes and store your own
adjustments in memory.
• When
is shown on the display, you can
move back to the previous screen by pressing number
button 6.
3
4
1
Press number button 1 (
) to
move to another setting level.
2
3
Select a sound mode.
4
/¢ : select the quality of
LPF. [–12dB/oct or –24dB/oct]
Control dial: Turn the control dial to select
the subwoofer phase. [0deg (normal) or
180deg (reverse)]
Select a frequency range to adjust.
* If “Off” is selected in step 2, you can only
adjust the subwoofer phase.
C
Hi Pass (Hi Pass Filter)
Turn the control dial to select the cutoff
frequency to the front/rear speakers. Set this
to match the LPF setting.
4
Adjust the sound elements of the selected
frequency range.
• Off:
All signals are sent to the front/rear
speakers.
1
Press 4 /¢ to select the
frequency band, then press 5 / ∞ to
enhanced level for the selected frequency
band. [–6 to +6]
• 62Hz: Frequencies lower than 62 Hz are
cut off.
• 95Hz: Frequencies lower than 95 Hz are
cut off.
• 135Hz: Frequencies lower than 135 Hz are
cut off.
VolAdjust, [–5 to +5]
2
3
Press number button 5 (
the control dial to select the frequency.
Press number button 5 (
), then turn
), then turn
D
the control dial to select the quality slope (Q).
Turn the control dial to adjust the input level
of each source (except FM).
Adjust to match the input level of the FM
sound level.
• Before making an adjustment, select the
source you want to adjust.
5
6
Repeat steps 3 and 4 to adjust the other
frequency bands.
Store the adjustments.
E
Loudness, [Off or On]
Turn the control dial to select “Off” or
“On.” When “On” is selected, low and high
frequencies sound are boosted to produce a
well-balanced sound at low volume level.
4
Exit from the setting.
Download from Www.Somanuals.com. All Manuals Search AndSDEoTwTnlIoNaGd.S 39
General settings—PSM
You can change PSM (Preferred Setting Mode) items
listed in the table below and on pages 41 and 42.
4
Adjust the selected PSM item.
1
Enter the PSM settings.
5
6
Repeat steps 2 – 4 to adjust other PSM items
if necessary.
2
Select a PSM category.
Finish the procedure.
To display the rest
3
Select a PSM item.
By pressing either one of the buttons repeatedly,
you can also move to the item of the other
categories.
Category Indication
Item
Setting, [reference page]
(
: Initial)
Demo
Display
demonstration
• On
:
Display demonstration will be activated automatically if no
operation is done for about 20 seconds, [7].
Cancels.
• Off
:
:
LevelMeter
• Meter 1
Select the different level meter patterns.
Audio level meter • Meter 2
• Press DISP to show the selected level meter.
Clock Disp*1
Clock display
• On
:
Clock time is shown on the display when the power is
turned off.
• Off
:
Cancels; pressing DISP will show the clock time for about
5 seconds when the power is turned off, [7].
1
*
If the power supply is not interrupted by turning off the ignition key of your car, it is recommended to select “Off” to
save the car’s battery.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Category Indication
Clock Hr
Item
Setting, [reference page]
(
: Initial)
1 – 12AM/
1 – 12PM
(0 – 23)
:
Initial: 1 (1:00AM), [7].
Hour adjustment
Clock Min
Minute adjustment
00 – 59
:
:
Initial: 00 (1:00AM), [7].
24H/12H
• 12Hours
See also page 7 for setting.
Time display mode • 24Hours
Scroll*2
Scroll
• Once
• Auto
• Off
:
:
:
Scrolls the track information once.
Repeats scrolling (at 5-second intervals).
Cancels. (Holding DISP can scroll the display regardless of the
setting.)
Dimmer
Dimmer
• Auto
• Off
• On
:
:
:
:
Dims the display when you turn on the headlights.
Cancels.
Dims the display and button illumination.
Set the timer for dimmer, [43].
Any hour – Any hour
• Time Set
From – To*3
—
:
:
Initial: 6PM – 7AM.
Contrast
Contrast
1 – 8
Initial: 5
Adjust the display contrast to make the display indications
clear and legible.
LCD Type
Display type
• Auto
:
Positive pattern will be selected during the day time*4; while
negative pattern will be used during the night time*4.
Positive pattern of the display.
• Positive
• Negative
:
:
Negative pattern of the display.
Tag
Tag display
• On
• Off
:
:
Shows the tag while playing MP3/WMA/WAV tracks.
Cancels.
NTSC/PAL*5
Video format
• PAL
• NTSC
:
:
Select this if your monitor is of the PAL color system.
Select this if your monitor is of the NTSC color system.
2
3
4
5
*
*
*
*
Some characters or symbols will not be shown correctly (or will be blanked) on the display.
Adjustable only when “Dimmer” is set to “Time Set.”
Depends on the “Dimmer” setting.
The newly selected video format takes effect only after you turn on the power again or change the source.
Continued on the next page
Download from Www.Somanuals.com. All Manuals Search AndSDEoTwTnlIoNaGd.S 41
Category Indication
Item
Setting, [reference page]
(
: Initial)
IF Band
Intermediate
frequency band
• Auto
:
:
Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
Subject to interference noises from adjacent stations, but
sound quality will not be degraded and the stereo effect will
remain.
• Wide
Ext Input*6
External input
• Changer
• Ext In
:
:
To use a JVC CD changer, [31], or an Apple iPod, [32].
To use any other external component, [36].
AudioBooks*7
Speed control of
“Audiobook”
• Normal
• Faster
• Slower
:
You can select the playback speed of the “Audiobook” sound
file in your iPod.
• Initial selected item depends on your iPod setting.
Amp Gain
Amplifier gain
control
• High PWR
• Low PWR
:
:
Volume 00 – Volume 50
Volume 00 – Volume 30 (Select if the maximum power of each
speaker is less than 50 W to prevent damaging the speaker.)
Rear Spk*8
Rear speaker output • Off
• On
:
:
Select this to turn on the rear speaker output.
Cancels.
Color Sel
Color selection
Initial: All
Source;
:
Select your favorite display color for each source (or for all
sources), [43, 44].
Color: Pale
Color Set
Color setting
—
:
Create your own colors, and select them for the display color,
[44].
Day Color
NightColor
00 — 11
00 — 11
00 — 11
:
:
:
:
:
User color during the day time*9.
User color during the night time*9.
Initial: Day Color: 07, NightColor: 05
Initial: Day Color: 07, NightColor: 05
Initial: Day Color: 07, NightColor: 05
Red
Green
Blue
Key Illum
Illumination switch • Green
• Red
:
You can select some of the buttons illumination according to
your preference.
6
*
Displayed only when one of the following sources is selected—TUNER, DISC, USB, USB-iPod, LINE IN, AV IN, or
Bluetooth.
Displayed only when an iPod is connected to the USB input jack and playback is controlled from the unit.
Displayed only when Dual Zone is activated (see page 25).
Depends on the “Dimmer” setting.
7
8
9
*
*
*
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the time for dimmer
Changing the display color
• When
is shown on the display, you can
You can select your favorite display color for each source
move back to the previous screen by pressing number (or all sources).
button 3. • When
Follow steps 1 to 3 on page 40.
is shown on the display, you can
move back to the previous screen by pressing number
button 3 or 6.
1
• In step 2, select “DISP.”
Setting the display color
• In step 3, select “Dimmer.”
1
Follow steps 1 to 3 on page 40.
• In step 2, select “COLOR.”
• In step 3, select “Color Sel.”
2
Select “Time Set.”
2
3
Select a source.
3
4
Adjust the dimmer start time.
1
Turn the control dial to set the dimmer start
time.
All Source*1 Ô DISC Ô Changer*3 (or
Ext In*2) Ô Line In Ô USB*3 Ô FM
Ô AM Ô iPod*3 Ô BT Phone*3 Ô BT
Audio*3 Ô AV In Ô (back to the beginning)
2
Press ¢ to select “To.” Then, turn the
control dial to set the dimmer end time.
Exit from the setting.
1
*
When you select “All Source,” you can use the
same color for all the sources.
2
3
*
*
Depends on the “Ext Input” setting, see page 42.
Displayed only when the target component is
connected.
Continued on the next page
Download from Www.Somanuals.com. All Manuals Search AndSDEoTwTnlIoNaGd.S 43
Creating your own color—User Color
You can create your own colors—“Day Color” or
“NightColor.”
4
Select a color.
1
Follow steps 1 to 3 on page 40.
• In step 2, select “COLOR.”
• In step 3, select “Color Set.”
Pale Ô Aqua Ô Sky Ô Sea Ô Leaves
Ô Grass Ô Apple Ô Rose Ô Amber Ô
Honey Ô Violet Ô Grape Ô Every*4 Ô
User*5 Ô (back to the beginning)
2
Select “Day Color” or “NightColor.”
4
*
*
The color changes every 2 seconds.
The user-edited colors—“Day Color” and
“NightColor” will be applied (see the right
column for details).
5
3
4
Select a primary color.
5
6
Repeat steps 3 and 4 to select the color for
each source (except when selecting “All
Source” in step 3).
Adjust the level (00 to 11) of the selected
primary color.
Exit from the setting.
5
6
Repeat steps 3 and 4 to adjust other primary
colors.
Exit from the setting.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc setup menu
These operations are possible on the monitor using the remote controller.
1
2
3
Enter the disc setup menu while stop.
Select a menu.
Select an item you want to set up.
• To cancel pop-up menu, press RETURN.
4
Select an option.
To return to normal screen
Menu
Item
MENU
Setting
Select the initial disc menu language. Refer also to “Language codes” on page 57.
LANGUAGE
AUDIO
Select the initial audio language. Refer also to “Language codes” on page 57.
LANGUAGE
SUBTITLE
Select the initial subtitle language or remove the subtitle (OFF). Refer also to
“Language codes” on page 57.
ON SCREEN
LANGUAGE
Select the language for the on screen display.
MONITOR TYPE Select the monitor type to watch a wide screen picture on your monitor.
Continued on the next page
Download from Www.Somanuals.com. All Manuals Search AndSDEoTwTnlIoNaGd.S 45
Menu
Item
Setting
OSD POSITION Select the on-screen bar position on the monitor.
• 1
• 2
:
:
Higher position
Lower position (Guidance below the disc setup menu will disappear.)
DIGITAL AUDIO Select the signal format to be emitted through the DIGITAL OUT (Optical) terminal.
OUTPUT
• OFF
• PCM ONLY
:
:
Cancels.
Select for an amplifier or a decoder incompatible
with Dolby Digital, DTS, MPEG Audio, or when
connecting to a recording device.
Select for an amplifier or a decoder compatible
with Dolby Digital.
• DOLBY DIGITAL/PCM
• STREAM/PCM
:
:
Select for an amplifier or a decoder compatible
with Dolby Digital, DTS, and MPEG Audio.
DOWN MIX
D. RANGE
When playing back a multi-channel disc, this setting affects the signals reproduced
through the LINE OUT jacks (and through the DIGITAL OUT terminal when “PCM
ONLY” is selected for “DIGITAL AUDIO OUTPUT”).
• SURROUND COMPATIBLE : Select to enjoy multi-channel surround audio by
connecting an amplifier compatible with Dolby
Surround.
• STEREO
:
Normally select this.
You can enjoy a powerful sound at low or middle volume levels while playing a
COMPRESSION Dolby Digital software.
• AUTO
:
:
Select to apply the effect to multi-channel
encoded software (excluding 1-channel and
2-channel software).
• ON
Select to always use this function.
DivX
This unit has its own Registration Code. Once you have played back a disc in which
REGISTRATION the Registration Code recorded, this unit’s Registration Code is overwritten for
copyright protection.
FILE TYPE (DISC) Select playback file type when a disc contains different types of files.
• AUDIO
• VIDEO
• AUDIO + VIDEO
:
:
:
Play MP3/WMA/WAV files.
Play DivX/MPEG Video files.
Play MP3/WMA/WAV/DivX/MPEG Video files.
FILE TYPE (USB) Select playback file type when a USB contains different types of files.
• AUDIO
• VIDEO
• AUDIO + VIDEO
:
:
:
Play MP3/WMA/WAV files.
Play DivX/MPEG Video files.
Play MP3/WMA/WAV/DivX/MPEG Video files.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Bluetooth settings
You can change the settings listed on the right column
according to your preference.
Setting menu ( : Initial)
Auto Connect
When the unit is turned on, the connection is
established automatically with...
• When
is shown on the display, you can
move back to the previous screen by pressing number
button 3.
Off:
No Bluetooth device.
Last:
The last connected Bluetooth device.
1
Select “BT-PHONE” or “BT-AUDIO.”
Order: The available registered Bluetooth device
found at first.
Auto Answer
Only for the device being connected for “BT-PHONE.”
On:
The unit answers the incoming calls
automatically.
The unit does not answer the calls
automatically. Answer the calls manually.
2
3
Enter the Bluetooth menu.
Select “Setting.”
Off:
Reject: The unit rejects all incoming calls.
Message Info
Only for the device being connected for “BT-PHONE.”
Auto:
The unit informs you of the arrival of
a message by ringing and displaying
“Received Message.”
4
Select a setting item.
Manual: The unit does not inform you of the arrival of
a message.
MIC setting (microphone setting)
Only for the device being connected for “BT-PHONE.”
Adjust the built-in microphone volume,
[LEVEL 01/02/03].
1
*
*
Displayed only when a Bluetooth phone is
connected.
Appears only when a Bluetooth phone is
connected and it is compatible with text message
(notified through JVC Bluetooth adapter).
Bluetooth Audio: Shows only “Version.”
Version
2
3
The Bluetooth software and hardware versions are
shown.
*
5
Change the setting accordingly.
Download from Www.Somanuals.com. All Manuals Search AndSDEoTwTnlIoNaGd.S 47
Title assignment
You can assign titles to 30 station frequencies (FM and
AM) using 10 characters (maximum) for each title.
To erase the entire title
In step 3 on the left column...
• When
is shown on the display, you can
move back to the previous screen by pressing number
button 3.
1
Select “TUNER.”
Available characters
Upper case
2
3
Show the title entry screen.
Lower case
Numbers and symbols
Assign a title.
1
Press number button 4 (
to select a character set.
) repeatedly
2
3
4
Turn the control dial to select a character. (For
available characters, see the right column.)
Use 4 /¢ to move to the next (or
previous) character position.
Repeat steps 1 to 3 until you finish entering
the title.
4
Store the title.
48 SETTINGS
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
How to clean the connectors
To keep discs clean
Frequent detachment will deteriorate the connectors.
To minimize this possibility, periodically wipe the
connectors with a cotton swab or cloth moistened with
alcohol, being careful not to damage the connectors.
A dirty disc may not play correctly.
If a disc does become dirty, wipe it with
a soft cloth in a straight line from center
to edge.
• Do not use any solvents (for example, conventional
record cleaner, spray, thinner, benzine, etc.) to clean
discs.
Connectors
To play new discs
New discs may have some rough spots
around the inner and outer edges. If
such a disc is used, this unit may reject
the disc.
Moisture condensation
Moisture may condense on the lens inside the unit in
the following cases:
• After starting the heater in the car.
To remove these rough spots, rub the edges with a
pencil or ball-point pen, etc.
• If it becomes very humid inside the car.
Should this occur, the unit may malfunction. In this
case, eject the disc and leave the unit turned on for a
few hours until the moisture has evaporated.
Do not use the following discs:
Single CD (8 cm disc)
Warped disc
How to handle discs
When removing a disc from its case,
press down the center holder of the
case and lift the disc out, holding it by
the edges.
Center holder
Sticker and
sticker residue
Stick-on label
• Always hold the disc by the edges. Do not touch its
recording surface.
When storing a disc in its case, gently insert the
disc around the center holder (with the printed surface
facing up).
C-thru Disc (semi-
transparent disc)
Unusual shape
• Make sure to store discs in cases after use.
Transparent or semi-transparent
parts on its recording area
REFERENCES 49
Download from Www.Somanuals.com. All Manuals Search And Download.
More about this unit
Basic operations
Disc operations
Turning on the power
General
• By pressing SOURCE on the unit, you can also turn on
the power. If the source is ready, playback also starts.
• In this manual, words “track” and “file” are
interchangeably used.
• This unit can only play back audio CD (CD-DA) files if
different type of files are recorded in the same disc.
Turning off the power
• If you turn off the power while listening to a track,
playback will start from where it had been stopped
previously next time you turn on the power.
Inserting a disc
• When a disc is inserted upside down, “Please Eject”
appears on the display. Press OPEN, then 0 to eject
the disc.
General
• If you change the source while listening to a disc,
playback stops.
Ejecting a disc
Next time you select “DISC” as the playback source,
playback will start from where it had been stopped
previously.
• After ejecting a disc or removing a USB device,
“No Disc” or “No USB” appears and you cannot
operate some of the buttons. Insert another disc,
reattach a USB device, or press SOURCE to select
another playback source.
• If the ejected disc is not removed within 15 seconds,
the disc is automatically inserted again into the
loading slot to protect it from dust. Playback starts
automatically.
• After ejecting a disc, “NO DISC” appears and you
cannot operate some of the buttons. Insert another
disc or press SOURCE to select another playback
source.
Playing Recordable/Rewritable discs
Tuner operations
• This unit can recognize a total of 5 000 files and 250
folders (a maximum of 999 files per folder).
• This unit can recognize a total 25 characters for file/
folder names.
Storing stations in memory
• During SSM search...
– All previously stored stations are erased and the
stations are stored anew.
– Received stations are preset in No. 1 (lowest
frequency) to No. 6 (highest frequency).
– When SSM is over, the station stored in No. 1 will
be automatically tuned in.
• When storing a station manually, the previously
preset station is erased when a new station is stored
in the same preset number.
• Use only “finalized” discs.
• This unit can play back multi-session discs; however,
unclosed sessions will be skipped while playing.
• This unit may be unable to play back some discs
or files due to their characteristics or recording
conditions.
• Rewritable discs may require a longer readout time.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
• Audio stream should conform to MP3 or Dolby
Digital.
• This unit does not support GMC (Global Motion
Compression).
Playing DVD-VR files
• For details about DVD-VR format and playlist, refer
to the instructions supplied with the recording
equipment.
• The file encoded in the interlaced scanning mode
may not be played back correctly.
• This unit cannot play back the following files:
– Files encoded in Codec (Compressor-decompressor)
other than DivX Codec.
• The maximum bit rate for video signals (average) is
4 Mbps.
• If you want to know more about DivX, visit
<http://www.divx.com>.
Playing MP3/WMA/WAV files
• The maximum number of characters for folder and
file names is 25 characters; 128 characters for MP3/
WAV and 64 characters for WMA tag information.
• This unit can play back files with the extension code
<.mp3>, <.wma>, or <.wav> (regardless of the
letter case—upper/lower).
• This unit can show the names of albums, artists
(performer), and Tag (Version 1.0, 1.1, 2.2, 2.3, or
2.4) for the MP3/WMA/WAV files.
• This unit can display only one-byte characters. No
other characters can be correctly displayed.
• This unit can play back files recorded in VBR (variable
bit rate).
Files recorded in VBR have a discrepancy in elapsed
time indication.
Playing MPEG Video files
• This unit can play back MPEG Video files with the
extension code <.mpg>, <.mpeg>, or <.mod>*.
* <.mod> is an extension code used for the MPEG-2 files
recorded by JVC Everio camcorders.
• Audio stream should conform to MPEG1 Audio
Layer 2.
• This unit cannot playback the following files:
– WMV (Windows Media Video) files
– RM (Real Media) format files
• The maximum bit rate for video signals (average) is
4 Mbps.
• This unit cannot play back the following files:
– MP3 files encoded with MP3i and MP3 PRO format.
– MP3 files encoded with Layer 1/2.
– WMA files encoded with lossless, professional, and
voice format.
– WMA files which are not based upon Windows
Media® Audio.
Changing the source
– WMA files copy-protected with DRM.
– Files which have the data such as ATRAC3, etc.
– AAC files and OGG files.
• If you change the source, playback also stops
(without ejecting the disc).
Next time you select “DISC” for the playback source,
disc play starts from where it has been stopped
previously.
Playing DivX files
• This unit can play back DivX files with the extension
code <.divx>, <.div>, <.avi> (regardless of the
letter case—upper/lower).
• This unit supports DivX Media Format files, <.divx>
or <.avi>.
• This unit can display a unique registration code—
DivX Video-on-Demand (VOD—a kind of Digital
Rights Management). For activation and more
details, visit <www.divx.com/vod>.
USB operations
• Connecting a USB device automatically changes the
source to “USB.”
• While playing from a USB device, the playback order
may differ from the one from other players.
• This unit may be unable to play back some USB
devices or some files due to their characteristics or
recording conditions.
Continued on the next page
REFERENCES 51
Download from Www.Somanuals.com. All Manuals Search And Download.
• Depending on the shape of the USB devices and
connection ports, some USB devices may not be
attached properly or the connection might be loose.
• When connecting a USB mass storage class device,
refer also to its instructions.
• Connecting condition may vary depending on the
circumstances around you.
• When the unit is turned off, the device is
disconnected.
• Connect one USB mass storage class device to the unit
at a time. Do not use a USB hub.
• This unit is compatible with the USB Full-Speed.
• If the connected USB device does not have the correct
files, “No File” appears.
appears when the connection is established.
Appears when the Bluetooth phone is
connected.
Appears when the Bluetooth audio player
is connected.
• This unit can play back MP3 files recorded in VBR
(variable bit rate).
Appears when the Bluetooth phone and
Bluetooth audio player are connected.
• The maximum number of characters for folder and
file names is 25 characters; 128 characters for MP3/
WAV and 64 characters for WMA Tag information.
• This unit can recognize a total of 5 000 files and 250
folders (999 files per folder).
Icons for phone types
These icons indicate the phone type set on the device:
• The unit cannot recognize a USB mass storage class
device whose rating is other than 5 V and exceeds
500 mA.
• USB devices equipped with special functions such as
data security functions cannot be used with the unit.
• Do not use a USB device with 2 or more partitions.
• This unit may not recognized a USB device connected
through a USB card reader.
:
:
:
Cellular phone
Household phone
Office
:
:
:
General
Other than above
Unknown
Warning messages for Bluetooth operations
• Connection Error:
The device is registered but the connection has failed.
Use “Connect” to connect the device again. (See
page 27.)
• This unit may not play back files in a USB device
properly when using a USB extension cord.
• This unit cannot assure proper functions or supply
power to all types of USB devices.
• Error
• For MPEG1/2 files: The maximum bit rate for video
signals (average) is 2 Mbps.
Try the operation again. If “Error” appears again,
check if the device supports the function you have
tried.
• Device not found
No available Bluetooth device is detected by
“Search...”.
• Loading...
The unit is updating the phone book and/or text
messages.
Bluetooth operations
General
• While driving, do not perform complicated operation
such as dialing the numbers, using phone book, etc.
Stop your car in a safe place before you perform these
operations.
• Some Bluetooth devices may not be connected to
this unit depending on the Bluetooth version of the
device.
• This unit may not work for some Bluetooth devices.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
• Please Wait...
The unit is preparing to use the Bluetooth function. If
• iPod shuffle and iPhone cannot be used with this
unit.
the message does not disappear, turn off and turn on
• You can control the iPod from this unit when “JVC” or
the unit, then connect the device again (or reset the
“
” appears on the iPod display after connection.
unit).
• Reset 08
• The song order displayed on the selection menu of
this unit may differ from that of the iPod.
• If playback is stopped, select a track from the
selection menu or press 3/8 (BAND) to play back
the same track again.
Check the connection between the adapter and this
unit.
• The text information may not be displayed correctly:
– Some characters such as accented letters cannot be
shown correctly on the display.
– Depends on the condition of communication
between the iPod and the unit.
• If the text information includes more than
16 characters, it scrolls on the display. This unit can
display up to 128 characters.
iPod
• Controllable iPod (connected through....):
(A) KS-PD100:
– iPod with dock connector (3rd Generation)
– iPod with click wheel (4th Generation)
– iPod nano (1st & 2nd*1 Generation)
– iPod mini (1st Generation)
– iPod video (5th Generation)*2
– iPod photo
(B) USB input jack:
– iPod nano (1st & 2nd Generation)
– iPod video (5th Generation)*3
When you connect the iPod nano to the interface
adapter, be sure to disconnect the headphones;
otherwise, no sound is heard.
It is not possible to browse video files on the “Videos”
menu while the iPod is connected to the interface
adapter.
To watch the video with its audio, connect the iPod
using USB Audio and Video cable (not supplied).
• Update your iPod to the latest software version
before using it with this unit.
Notice:
When operating an iPod, some operations may not
be performed correctly or as intended. In this case,
visit the following JVC web site:
co.jp/english/car/>
– For the inferface adapter connection: <http://
index.html>
1
*
*
*
2
3
Title assignment
• If you try to assign titles to more than 30 station
frequencies, “Name Full” appears. Delete unwanted
titles before assignment.
– You can check the software version of your iPod
under “About” in the “Setting” menu of the iPod.
– For details about updating your iPod, visit
<http://www.apple.com>.
• While the unit is being turned on, the iPod is charged
through this unit.
Continued on the next page
REFERENCES 53
Download from Www.Somanuals.com. All Manuals Search And Download.
General settings—PSM
• “Auto” setting for “Dimmer” may not work correctly
on some vehicles, particularly on those having a
control dial for dimming.
In this case, change the “Dimmer” setting to any
other than “Auto.”
• If “LCD Type” is set to “Auto,” the display pattern
will change to the “Positive” or “Negative” pattern
depending on the “Dimmer” setting.
• If you change the “Amp Gain” setting from
“High PWR” to “Low PWR” while the volume level is
set higher than “Volume 30,” the unit automatically
changes the volume level to “Volume 30.”
About sounds reproduced through the
rear terminals
• Through the analog terminals (Speaker out/
LINE OUT):
2-channel signal is emitted. When playing a
multi-channel encoded disc, multi-channel
signals are downmixed. DTS sound cannot be
reproduced. (AUDIO—DOWN MIX: see page 46.)
• Through DIGITAL OUT (optical):
Digital signals (Linear PCM, Dolby Digital, DTS,
MPEG Audio) are emitted through this terminal.
(For more details, see table on page 56.)
To reproduce multi-channel sounds such as
Dolby Digital, DTS, and MPEG Audio, connect an
amplifier or a decoder compatible with these
multi-channel sources to this terminal, and set
“DIGITAL AUDIO OUTPUT” correctly. (See page 46.)
• About Dual Zone:
Disc setup menu
• When the language you have selected is not recorded
on a disc, the original language is automatically used
as the initial language. In addition, for some discs,
the initial languages settings will not work as you set
due to their internal disc programming.
• When you select “16:9” for a picture whose aspect
ratio is 4:3, the picture slightly changes due to the
process for converting the picture width.
Through the 2nd AUDIO OUT, 2-channel signal is
emitted. When playing a multi-channel encoded
disc, multi-channel signals are downmixed. (See
page 25.)
• Even if “4:3 PAN SCAN” is selected, the screen size
may become “4:3 LETTERBOX” for some discs.
Adjustable sound elements
Range/selectable items
Sound elements
Frequency
Band 1
(100 Hz)
Band 2
(320 Hz)
Band 3
(1 kHz)
Band 4
(3.2 kHz)
Band 5
(10 kHz)
68 Hz
210 Hz
680 Hz
2.1 kHz
6.8 kHz
100 Hz
150 Hz
320 kHz
460 kHz
1 kHz
1.5 kHz
3.2 kHz
4.6 kHz
10 kHz
15 kHz
Level
–6 to +6
–6 to +6
–6 to +6
–6 to +6
–6 to +6
Q (Q-slope)
Q0.7
Q1.0
Q1.4
Q2.0
Q0.7
Q1.0
Q1.4
Q2.0
Q0.7
Q1.0
Q1.4
Q2.0
Q0.7
Q1.0
Q1.4
Q2.0
Q0.7
Q1.0
Q1.4
Q2.0
54
Download from Www.Somanuals.com. All Manuals Search And Download.
On-screen guide icons
During playback, the following guide icons may appear for a while on the monitor.
:
:
:
:
:
:
Playback
Pause
DVD-Video/VCD: Forward slow motion
DVD-Video: Reverse slow motion
Forward search
Reverse search
DVD: The following icons appear at the beginning of a scene containing:
:
:
:
Multi-subtitle languages
Multi-audio languages
Multi-angle views
• Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
• “DTS” and “DTS Digital Out” are registered trademarks of DTS, Inc.
• “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation registered in the US, Japan and other
countries.
• DivX, DivX Ultra Certified, and associated logos are trademarks of DivX, Inc. and are used under license.
• Official DivX® Ultra Certified product
• Plays all versions of DivX® video (including DivX® 6) with enhanced playback of DivX® media files and the DivX®
Media Format
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
• The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Victor
Company of Japan, Limited (JVC) is under license. Other trademarks and trade names are those of their respective
owners.
• iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
• This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual
property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended
for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or
disassembly is prohibited.
Continued on the next page
REFERENCES 55
Download from Www.Somanuals.com. All Manuals Search And Download.
Output signals through the DIGITAL OUT terminal
Output signals are different depending on the “DIGITAL AUDIO OUTPUT” setting on the setup menu (see
page 46).
Output Signal
Playback Disc
STREAM/PCM
DOLBY DIGITAL/
PCM
PCM ONLY
OFF
DVD-Video 48 kHz, 16/20/24 bits
48 kHz, 16 bits stereo Linear PCM *
Linear PCM
96 kHz Linear PCM
Dolby Digital
48 kHz, 16 bits stereo Linear PCM
48 kHz, 16 bits
stereo Linear PCM
Dolby Digital bitstream
DTS
MPEG Audio
DTS bitstream
48 kHz, 16 bits stereo Linear PCM
48 kHz, 16 bits stereo Linear PCM
MPEG bitstream
Audio CD, Video CD
44.1 kHz, 16 bits stereo Linear PCM /
48 kHz, 16 bits stereo Linear PCM
DTS bitstream 48 kHz, 16 bits stereo Linear PCM
OFF
Audio CD with DTS
DivX/
MPEG
Dolby Digital
48 kHz, 16 bits
stereo Linear PCM
Dolby Digital bitstream
MPEG Audio
32/44.1/48 kHz, 16 bits Linear PCM
32/44.1/48 kHz, 16 bits Linear PCM
44.1 kHz, 16 bits stereo Linear PCM
MP3/WMA
WAV
* Digital signals may be emitted at 20 or 24 bits (at their original bit rate) through the DIGITAL OUT terminal if the
discs are not copy-protected.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Language codes
Code Language
AA Afar
Code Language
FA Persian
FI Finnish
FJ Fiji
Code Language
KK Kazakh
Code Language
NO Norwegian
OC Occitan
Code Language
ST Sesotho
AB Abkhazian
AF Afrikaans
AM Ameharic
AR Arabic
KL Greenlandic
KM Cambodian
KN Kannada
SU Sundanese
OM (Afan) Oromo SW Swahili
FO Faroese
FY Frisian
GA Irish
OR Oriya
TA Tamil
TE Telugu
TG Tajik
KO Korean (KOR)PA Panjabi
AS Assamese
AY Aymara
AZ Azerbaijani
BA Bashkir
KS Kashmiri
KU Kurdish
KY Kirghiz
LA Latin
PL Polish
GD Scots Gaelic
GL Galician
GN Guarani
PS Pashto, Pushto TH Thai
QU Quechua
TI Tigrinya
RM Rhaeto-
Romance
TK Turkmen
BE Byelorussian GU Gujarati
LN Lingala
RN Kirundi
TL Tagalog
BG Bulgarian
BH Bihari
HA Hausa
HI Hindi
LO Laothian
LT Lithuanian
RO Rumanian
TN Setswana
RW Kinyarwanda TO Tonga
BI Bislama
HR Croatian
LV Latvian, Lettish SA Sanskrit
TR Turkish
TS Tsonga
TT Tatar
BN Bengali, Bangla HU Hungarian
MG Malagasy
MI Maori
SD Sindhi
SG Sangho
BO Tibetan
BR Breton
CA Catalan
CO Corsican
CS Czech
HY Armenian
IA Interlingua
IE Interlingue
IK Inupiak
MK Macedonian SH Serbo-Croatian TW Twi
ML Malayalam
MN Mongolian
MO Moldavian
MR Marathi
SI Singhalese
SK Slovak
UK Ukrainian
UR Urdu
IN Indonesian
IS Icelandic
IW Hebrew
SL Slovenian
SM Samoan
UZ Uzbek
VI Vietnamese
VO Volapuk
WO Wolof
XH Xhosa
YO Yoruba
ZU Zulu
CY Welsh
DZ Bhutani
EL Greek
MS Malay (MAY)SN Shona
JA Japanese
MT Maltese
MY Burmese
NA Nauru
NE Nepali
SO Somali
SQ Albanian
SR Serbian
SS Siswati
EO Esperanto
ET Estonian
EU Basque
JI
Yiddish
JW Javanese
KA Georgian
REFERENCES 57
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
What appears to be trouble is not always serious. Check the following points before calling a service center.
Symptom
Remedy/Cause
• Sound cannot be heard from the speakers.
• Adjust the volume to the optimum level.
• Check the cords and connections.
• The unit does not work at all.
Reset the unit (see page 3).
• “Connect Error” appears on the display.
Remove the control panel, wipe the connector, then
attach it again (see page 4).
• SSM automatic presetting does not work.
• Static noise while listening to the radio.
• Disc cannot be played back.
Store stations manually.
Connect the antenna firmly.
Insert the disc correctly.
• Disc can be neither played back nor ejected. • Unlock the disc (see page 14).
• Eject the disc forcibly (see page 3).
• Recordable/Rewritable discs cannot be
played back.
• Tracks on the Recordable/Rewritable discs
cannot be skipped.
• Insert a finalized disc.
• Finalize the discs with the component which you
have used for recording.
• Disc cannot be recognized.
Eject the disc forcibly (see page 3).
• Sound and pictures are sometimes
interrupted or distorted.
• Stop playback while driving on rough roads.
• Change the disc.
• Check the cords and connections.
• No playback picture (DVD-Video/DivX/MPEG/ Parking brake wire is not connected properly. (See
VCD) appears on the monitor.
Installation/Connection Manual.)
• No picture appears on the monitor at all.
• Connect the video cord correctly.
• Select a correct input on the monitor.
• The monitor shows black and white wavy
pictures (DVD-Video/DivX/MPEG/VCD).
Select an appropriate video format (PAL/NTSC) for your
monitor (see page 41).
• The left and right edges of the picture are
missing on the monitor.
Select “4:3 LETTERBOX” (see page 45).
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Remedy/Cause
• Change the disc.
• Disc cannot be played back.
• Record the tracks using a compliant application in
the appropriate discs (see page 6).
• Add the extension code <.divx>, <.div>, <.avi>,
<.mpg>, <.mpeg>, <.mp3>, <.wma>, or
<.wav> to the file names.
• Noise is generated.
Skip to another track or change the disc.
• Tracks cannot play back as you have intended Playback order is determined when files are recorded.
them to play.
• Longer readout time is required (“Reading” Readout time varies due to the complexity of the
keeps flashing on the display).
folder/file configuration. Do not use too many
hierarchies and folders.
• No sound can be heard when picture is
displayed while playing a DivX/MPEG Video
file.
• Record the audio track using MP3 or Dolby Digital as
the audio stream of DivX files.
• Record the audio track using MPEG1 Audio Layer 2 as
the audio stream for MPEG Video files.
• Elapsed playing time is not correct.
This sometimes occurs during playback. This is caused
by how the tracks are recorded.
• “Please Eject” appears on the display.
Insert a disc that contains tracks of appropriate formats.
• Correct characters are not displayed (e.g.
album name).
This unit can only display letters (capital: A – Z,
small: a – z), numbers, and a limited number of
symbols (see page 48).
• Noise is generated.
• The track played back is not a playable file format
(MP3/WMA/WAV). Skip to another file.
• Do not add the extension code <.mp3>, <.wma>,
or <.wav> to non-MP3/WMA/WAV tracks.
• Tracks cannot play back as you have intended Playback order may differs from the one played back
them to play.
using other players.
• “Reading” keeps flashing on the display.
• Readout time varies depending on the USB device.
• Do not use too many hierarchy, folders and empty
folders.*
• Turn off the power then on again.
• Do not pull out or connect the USB device repeatedly
while “Reading” is displayed on the display.
* Folder that is phisically empty or folder that contains
data but does not contain valid MP3/WMA/WAV track.
Continued on the next page
REFERENCES 59
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Remedy/Cause
• “No File” flashes on the display.
• “No USB” appears on the display.
Connect a USB device that contains tracks encoded in an
appropriate format.
• “Not Support” appears on the display and The track is unplayable.
track skips.
• “Read failed” appears on the display.
The connected USB device may be malfunctioning,
or may not have been formatted correctly. The files
included in the USB device are corrupted.
• Correct characters are not displayed (e.g.
album name).
For available characters, see page 48.
• While playing a track, sound is sometimes The tracks have not been properly copied into the USB
interrupted.
device. Copy tracks again into the USB device, and try
again.
• The sound is interrupted or skipped during • Turn off, then turn on the unit.
playback of a USB device. • Connect the device again, when the sound is not yet
restored.
• Bluetooth device does not detect the unit. The unit can be connected with one Bluetooth cellular
phone and one Bluetooth audio device at a time.
While connecting a device, this unit cannot be detected
from another device. Disconnect currently connected
device and search again.
• The unit does not detect the Bluetooth
device.
• Check the Bluetooth setting of the device.
• Search from the Bluetooth device. After the device
detects the unit, select “Open...” on the unit to connect
the device. (See page 26.)
• The unit does not make pairing with the
Bluetooth device.
• Enter the same PIN code for both the unit and target
device.
• Select the device name from “Special,” then try to
connect again. (See page 27.)
• Phone sound quality is poor.
• Reduce the distance between the unit and the
Bluetooth cellular phone.
• Move the car to a place where you can get a better
signal reception.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Remedy/Cause
• The sound is interrupted or skipped during • Reduce the distance between the unit and the
playback of a Bluetooth audio player.
Bluetooth audio player.
• Turn off, then turn on the unit.
• When the sound is not yet restored: Connect the player
again.
• The connected audio player cannot be
controlled.
Check whether the connected audio player supports
AVRCP (Audio Video Remote Control Profile).
(Operations depend on the connected audio player.)
• “No Disc” appears on the display.
• “No Magazine” appears on the display.
• “Reset 08” appears on the display.
Insert a disc into the magazine.
Insert the magazine.
Connect this unit and the CD changer correctly and press
the reset button of the CD changer.
• “Reset 01” – “Reset 07” appears on the
display.
Press the reset button of the CD changer.
• The CD changer does not work at all.
Reset the unit (see page 3).
• The iPod does not turn on or does not work. • Check the connecting cable and its connection.
• Update the firmware version.
• Charge the battery.
• The sound is distorted.
Deactivate the equalizer either on this unit or the iPod.
• “Disconnect” appears on the display.
• Check the connecting cable and its connection.
• Charge the battery.
• Playback stops.
The headphones are disconnected during playback.
Restart the playback operation (see pages 32 and 33).
• No sound can be heard when connecting an • Disconnect the headphones from the iPod nano.
iPod nano.
• Update the firmware version of the iPod nano.
• “No File” appears on the display.
No tracks are stored. Import tracks to the iPod.
• “Reset 01” – “Reset 07” appears on the
display.
Disconnect the adapter from both this unit and iPod.
Then, connect it again.
• “Reset 08” appears on the display.
Check the connection between the adapter and this unit.
Reset the iPod.
• The iPod’s controls do not work after
disconnecting from this unit.
REFERENCES 61
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Maximum Power
Output:
Front/Rear:
Front/Rear:
50 W per channel
Continuous Power
Output (RMS):
19 W per channel into 4 Ω, 40 Hz
to 20 000 Hz at no more than 0.8%
total harmonic distortion
Load Impedance:
4 Ω (4 Ω to 8 Ω allowance)
Equalizer Control
Range:
Frequency:
Band 1: 68 Hz, 100 Hz, 150 Hz
Band 2: 210 Hz, 320 Hz, 460 Hz
Band 3: 680 Hz, 1 kHz, 1.5 kHz
Band 4: 2.1 kHz, 3.2 kHz, 4.6 kHz
Band 5: 6.8 kHz, 10 kHz, 15 kHz
Level:
10 dB
Signal to Noise Ratio:
Audio Output Level:
80 dB
Digital (DIGITAL OUT: Optical):
Signal wave length: 660 nm
Output level: –21 dBm to –15 dBm
2.5 V/20 kΩ load (full scale)
1 kΩ
Line-Out Level/Impedance:
Output Impedance:
Subwoofer-out Level/Impedance:
2.5 V/20 kΩ load (full scale)
PAL/NTSC
Color system:
Video Output (composite):
Other Terminal:
1 Vp-p/75 Ω
CD changer, AV-IN (video) input jack, USB input jack, Antenna input, 2nd AUDIO
OUT, LINE IN
Frequency Range:
FM Tuner:
FM:
87.5 MHz to 108.0 MHz
531 kHz to 1 602 kHz
11.3 dBf (1.0 μV/75 Ω)
16.3 dBf (1.8 μV/75 Ω)
65 dB
AM:
Usable Sensitivity:
50 dB Quieting Sensitivity:
Alternate Channel Selectivity (400 kHz):
Frequency Response:
Stereo Separation:
Sensitivity:
40 Hz to 15 000 Hz
30 dB
AM Tuner:
20 μV
Selectivity:
35 dB
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Signal Detection System: Non-contact optical pickup (semiconductor laser)
Number of Channels:
Frequency Response:
2 channels (stereo)
DVD, fs=48 kHz/96 kHz:
CD, fs=44.1 kHz:
16 Hz to 22 000 Hz
16 Hz to 20 000 Hz
96 dB/98 dB
Dynamic Range/Signal-to-Noise Ratio:
Wow and Flutter:
Less than measurable limit
DivX/MPEG
Video:
Video: Max. Resolution:
720 × 480 pixels (30 fps)
720 × 576 pixels (25 fps)
Audio: Bit Rate:
DivX: 32 kbps – 320 kbps
MPEG Video: 32 kbps – 320 kbps
Sampling Frequency: DivX:
MPEG-1: 32 kHz, 44.1 kHz, 48 kHz
MPEG-2: 16 kHz, 22.05 kHz, 24 kHz
Sampling Frequency: MPEG Video: 32 kHz, 44.1 kHz, 48 kHz
MP3:
Bit Rate:
32 kbps – 320 kbps
Sampling Frequency:
MPEG-1: 32 kHz, 44.1 kHz, 48 kHz
MPEG-2: 16 kHz, 22.05 kHz, 24 kHz
WMA:
WAV:
Bit Rate:
32 kbps – 320 kbps
Sampling Frequency:
Quantization Bit Rate:
Sampling Frequency:
22.05 kHz, 32 kHz, 44.1 kHz, 48 kHz
16 bit
44.1 kHz
USB Standards:
USB 1.1, USB 2.0
Full Speed:
Data Transfer Rate:
Maximum 12 Mbps
Maximum 1.5 Mbps
Mass storage class
Low Speed:
Compatible Device:
Compatible File System:
Playable Audio Format:
Max. Current:
FAT 32/16/12
DivX/MPEG1/MPEG2/MP3/WMA/WAV
500 mA/5 V
Power Requirement:
Grounding System:
Operating Voltage:
DC 14.4 V (11 V to 16 V allowance)
Negative ground
Allowable Operating Temperature:
0°C to +40°C
Dimensions
(W × H × D):
Installation Size (approx.):
Panel Size (approx.):
182 mm × 52 mm × 159 mm
188 mm × 58 mm × 6 mm
1.5 kg (excluding accessories)
Mass (approx.):
Design and specifications are subject to change without notice.
REFERENCES 63
Download from Www.Somanuals.com. All Manuals Search And Download.
Having TROUBLE with operation?
Please reset your unit
Refer to page of How to reset your unit
EN
© 2008 Victor Company of Japan, Limited
0108DTSMDTJEIN
Download from Www.Somanuals.com. All Manuals Search And Download.
|