For models:
C-13910
C-13911
C-20910
COLOR TELEVISION
USER’S GUIDE
AV-20920
AV-20921
AV-27920
(Illustration of AV-27920 and RM-C754)
IMPORTANT NOTE TO THE CUSTOMER:
In the spaces below, enter the model and serial number
for your television (located on the rear of the television cabinet).
Staple your sales receipt or invoice to the inside cover of this guide.
Keep this user’s guide in a convenient place for future reference.
Keep the carton and original packaging for future use.
Serial Number
Model Number
Download from Www.Somanuals.com. All Manuals Search And Download.
6 If an outside antenna is connected to the TV set, be sure the
antenna system is grounded so as to provide some protection
against voltage surges and built-up static charges. Section 810
of the National Electrical Code provides information with respect
to proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit, size
of grounding conductors, location of antenna discharge unit,
connection requirements for the grounding electrode.
13 For added protection of the TV set during a lightning storm or
when the TV set is to be left unattended for an extended period
of time, unplug it from the wall outlet and disconnect the
antenna. This will prevent damage to product due to lightning
storms or power line surges.
14 A TV set and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause
the TV set and cart combination to overturn.
7 An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines or
circuits. When installing an outside antenna system, extreme
care should be taken to keep from touching such power
lines or circuits as contact with them might be fatal.
SERVICE
15 Unplug this TV set from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the TV set.
C. If the TV set has been exposed to rain or water.
D. If the TV set does not operate normally by following the
operating instructions. Adjust only those controls that are
covered in the operating instructions as improper adjust-
ment of other controls may result in damage and will often
require extensive work by a qualified technician to restore
the TV set to normal operation.
8 TV sets are provided with ventilation openings in the cabinet
to allow heat generated during operation to be released.
Therefore:
E. If the TV set has been dropped or damaged in any way.
F. When the TV set exhibits a distinct change in perfor-
mance — this indicates a need for service.
— Never block the bottom ventilation slots of a portable TV
set by placing it on a bed, sofa, rug, etc.
— Never place a TV set in a “built-in” enclosure unless
proper ventilation is provided.
16 Do not attempt to service this TV set yourself as opening or
removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service personnel.
— Never cover the openings with a cloth or other material.
— Never place the TV set near or over a radiator or heat registe.r
9 To avoid personal injury:
17 When replacement parts are required, have the service
technician verify in writing that the replacement parts he uses
have the same safety characteristics as the original parts.
Use of manufacturer’s specified replacement parts can
prevent fire, shock, or other hazards.
— Do not place a TV set on a sloping shelf unless properly secured.
— Use only a cart or stand recommended by the TV set
manufacturer.
18 Upon completion of any service or repairs to this TV set,
please ask the service technician to perform the safety check
described in the manufacturer’s service literature.
— Do not try to roll a cart with small casters across thresh-
olds or deep pile carpets.
— Wall or shelf mounting should follow the manufacturer’s
instructions, and should use a mounting kit approved by
the manufacturer.
19 When a TV set reaches the end of its useful life, improper
disposal could result in a picture tube implosion. Ask a
qualified service technician to dispose of the TV set.
USE
20 Note to CATV system installer.
10 Caution children about dropping or pushing objects into the TV set
through cabinet openings. Some internal parts carry hazardous
voltages and contact can result in a fire or electrical shock.
This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry
as practical.
11 Unplug the TV set from the wall outlet before cleaning. Do
not use liquid or an aerosol cleaner.
12 Never add accessories to a TV set that has not been designed for
this purpose. Such additions may result in a hazard.
Download from Www.Somanuals.com. All Manuals Search And Download.
WELCOME!
Congratulations on your new television purchase! We thank you for choosing JVC.
We know you are anxious to start watching your new television, but before you operate it,
please read this guide and then keep it handy for future reference. After all, you just bought a great
TV with a lot of terrific features, you should know what each feature is and how to use it properly!
Please note as you read through this guide, that there are illustrations of select models for
your reference. There are several models in this guide and therefore each illustration will not be of
the model you own. Just be sure to look for the similar feature on your TV.
Again, congratulations and thank you for choosing JVC! Enjoy!
TABLE OF CONTENTS
CONNECTIONS
Menu Functions Cont...
Sound Settings
Connections Checklist . . . . . . . . . . . . . 5
Front Panel Diagrams . . . . . . . . . . . . . . 5
Rear Panel Diagrams . . . . . . . . . . . . . . 6
Cable Connections . . . . . . . . . . . . . . . 6
Audio Video Connections . . . . . . . . . . . 7
Connecting to External Amplifier . . . . . . . . 7
Connecting to a Camcorder . . . . . . . . . . 7
Bass . . . . . . . . . . . . . . . . . . 15
Treble . . . . . . . . . . . . . . . . . . 15
Balance . . . . . . . . . . . . . . . . . 15
MTS (Multi-channel TV Sound) . . . . 15
Some Sound Advice . . . . . . . . . . 15
General Items
TV Speaker . . . . . . . . . . . . . . . 16
Set Clock . . . . . . . . . . . . . . . 16
On/Off Timer . . . . . . . . . . . . . . 17
Channel Summary . . . . . . . . . . . 17
Set Lock Code . . . . . . . . . . . . . 18
GETTING STARTED
Remote Controls . . . . . . . . . . . . . . . . . 8
Power . . . . . . . . . . . . . . . . . . . . . . 9
Adjusting Volume . . . . . . . . . . . . . . . . 9
Changing Channels . . . . . . . . . . . . . . . 9
Remote Programming . . . . . . . . . . . . . 10
CATV & Satellite Codes . . . . . . . . . . . . 10
VCR Codes . . . . . . . . . . . . . . . . . . . 11
BUTTON FUNCTIONS
Display . . . . . . . . . . . . . . . . . . . . . 19
Closed Caption . . . . . . . . . . . . . . . . . 19
Video Status . . . . . . . . . . . . . . . . . . 19
Sleep Timer . . . . . . . . . . . . . . . . . . . 19
Hyper Surround . . . . . . . . . . . . . . . . 19
Number Buttons (10 Key Pad) . . . . . . . . 20
100+ . . . . . . . . . . . . . . . . . . . . . . 20
Muting . . . . . . . . . . . . . . . . . . . . . 20
Menu Buttons . . . . . . . . . . . . . . . . . . 20
TV/Video . . . . . . . . . . . . . . . . . . . . 20
Return+. . . . . . . . . . . . . . . . . . . . 20
VCR Buttons . . . . . . . . . . . . . . . . . . 20
MENU FUNCTIONS
Using the Menu . . . . . . . . . . . . . . . . 12
Initial Setup
Auto Tuner Setup. . . . . . . . . . . . 13
Background . . . . . . . . . . . . . 13
Closed Caption . . . . . . . . . . . . 13
Language (for on-screen menus) . . 13
Picture Settings
Tint . . . . . . . . . . . . . . . . . . . 14
Color . . . . . . . . . . . . . . . . . . 14
Picture . . . . . . . . . . . . . . . . . 14
Bright . . . . . . . . . . . . . . . . . . 14
Detail . . . . . . . . . . . . . . . . . . 14
Noise Muting . . . . . . . . . . . . . . 14
Set Video Status . . . . . . . . . . . . 14
APPENDICES
Troubleshooting . . . . . . . . . . . . . . . . 21
Limited Warranty . . . . . . . . . . . . . . . . 22
Authorized Service Centers . . . . . . . . . . 23
Specifications . . . . . . . . . . . . . . . . . 24
Download from Www.Somanuals.com. All Manuals Search And Download.
C O N N E C T I O N S 5
CONNECTIONS CHECKLIST — READ ME FIRST!
The Connections Checklist — Read Me First! section of this guide is a list of ideas to keep in mind
when you set out to perform your connections. It is designed to help us not-so-technically-
advanced individuals. If you read this section, and can’t identify the plugs, connectors, and
components you have, do not be afraid to seek help.
1) Always refer to the connection instructions in the user’s
A/V input plug
guide for your components first! The manufacturer will
provide the most detailed information about their products.
2) Know your jacks and plugs — most are color coded:
• Yellow plugs are Video connections
• Red plugs are Right Audio connections
• White or black plugs are Left Audio (Mono) connec-
tions (if your VCR is mono, it will have a white or
black plug, no red)
RF Connectors
3) Perform one hookup at a time. If you have many
accessories to connect, make sure each connection is
correct by checking to see that it works properly before
attempting the next connection.
4) Unplug the power cord between each connection.
S-Video Plug
5) In and Out Concept. Remember In and Out. The Output jack
from one piece will go to the Input jack of the other — read the
jack panels, they are all labeled.
FRONT PANEL DIAGRAMS
AV-27920 Front Panel
AV-20920 • AV-20921 • C-20910 Front Panel
C-13910 • C-13911 Front Panel
Download from Www.Somanuals.com. All Manuals Search And Download.
6 C O N N E C T I O N S
REAR PANEL DIAGRAMS
C-13910 • C-13911
C-20910
CABLE CONNECTIONS
There are two basic types of antenna/cable hookups, but they are easy to distinguish.
#1 If you have an antenna, or have a cable TV system that does not require you to use a cable box to tune
channels, use diagram #1. (No cable box, Diagram #1.)
#2 If you use a cable box to access any or all channels, use diagram #2. (Cable box, Diagram #2.)
1) Connect the cable or antenna
#1
wire out from the wall, in to the
VCR RF input.
2) Connect an RF cable out from the
VCR output, in to the TV’s RF input.
❒ Refer to the VCR’s instructions.
❒ If you want to use the VCR as a
separate tuner, (in other words
not be required to have the VCR
on Channel 3 or 4 when the
power is on) you can connect a
two-way splitter in between the
cable and the VCR connections.
Illustration of C-20910
1) Connect the cable wire out from
the wall in to the cable box RF
input.
#2
2) Connect an RF cable out from
the cable box, in to VCR RF
input.
3) Connect an RF cable out from
VCR RF output, in to TV VHF/UHF
input.
❒ Refer to the VCR and/or cable
Illustration of C-20910
box instructions.
Download from Www.Somanuals.com. All Manuals Search And Download.
C O N N E C T I O N S 7
AUDIO VIDEO CONNECTIONS — STEREO
For models AV-27920, AV-20920 and AV-20921, you can get stereo sound from a stereo VCR by
connecting Audio/Video Cables (yellow, white or black, and red).
1) Connect the yellow video cable from the
VCR Video output jack, into the TV Video
input jack.
2) Connect the white (or black) audio cable
from the VCR Left Audio output jack, into
the TV Left Audio input jack.
3) Connect the red audio cable from the
VCR’s Right Audio output jack into the
TV’s Right Audio input jack.
❒ The C-13910, C-13911, and C-20910 do
Illustration of AV-20920
not have red audio jacks because they are
mono televisions.
❒ If your VCR is mono it will have only one
audio out jack.
❒ Refer to the VCR’s instructions.
CONNECTING TO AN EXTERNAL AMPLIFIER
AV-20920, AV-20921 & AV-27920 only.
If you set the TV Speaker to off (see
page 16 for special setup), you can
adjust the amplifier’s sound with the
TV remote’s VOLUME -/+ button!
1) Connect a white audio cable from
the TV Left Audio output jack into
the Amplifier’s Left Audio input.
2) Connect a red audio cable from
the TV Right Audio output jack into
Illustration of AV-20920
the Amplifier’s Right Audio input.
❒ Refer to the amplifier’s instructions.
CONNECTING TO A CAMCORDER
You can connect a camcorder right to your TV.
1) Connect a white audio cable from the
camcorder output into the TV’s Left Audio
input jack.
2) Connect a yellow video cable from the cam-
corder output into the TV’s Video input jack.
3) If you have both a stereo model TV and
camcorder, connect the red audio cable
from the camcorder output into the TV Right
audio input jack.
Illustration of AV-20920
❒ Refer to the camcorder’s instructions.
Download from Www.Somanuals.com. All Manuals Search And Download.
8 G E T T I N G S T A R T E D
REMOTE CONTROLS
RM-C754
AV-27920
RM-C751
AV-20920 • AV-20921
RM-C542
C-13910 • C-13911
C-20910
CHANGING THE BATTERIES
Be sure to use only size AA batteries.
Push down or raise the latch on the remote's back
cover to remove it.
1
2
Insert the two supplied AA batteries, carefully noting
the “+” and “–” markings on the batteries and remote
control. To avoid a short circuit, insert “–” end first.
Snap the cover back into place.
3
RM-C542
❒ If the remote control acts erratically, replace the batteries.
Typical battery life is usually about six months to one year.
❒ We recommend alkaline batteries for a longer battery life.
RM-C754/RM-C751 USERS NOTE:
When you change the batteries, try to complete the task
within three minutes. If it takes longer than 3 minutes, the
remote control codes for your VCR and/or Cable box will
have to be reset (page 10).
RM-C754 • RM-C751
Download from Www.Somanuals.com. All Manuals Search And Download.
G E T T I N G S T A R T E D 9
POWER
❒ Press the POWER button on the remote control or the TV front panel. The power lamp will glow red.
(On the AV-27920, the On Timer lamp will glow red.)
❒ Make sure that the TV/CATV switch is set to TV (RM-C754 and RM-C751 only). Switch to CATV
only if you plan to operate a cable box. If you switch to CATV you will not be able to operate the
TV functions with the remote, only the cable box functions!
❒ To turn the power off, press the POWER button again. The power lamp will go out.
❒ The On Timer lamp will glow red when the On/Off Timer is set, even when the TV power is off.
ADJUSTING VOLUME
1
2
CHANGING CHANNELS
10 key direct access.
1
Press the numbers on the remote’s 10 key pad. For single-digit channel numbers press 0 then the
number. For channels above 100, press the 100+ button plus the 2-digit number.
CHANNEL -/+ button.
2
Press the CHANNEL -/+ button, it will scan the channels in order.
❒ NOTE: After you operate the Auto Tuner Setup (page 13), all of the blank, or empty, channels will be
removed from scanning so that there is no noise or channel snow when you scan, only active channels.
3 Return.
Press and release the RETURN+ button to return to the previous channel. First, select a channel
(game #1). Then, select another channel (game #2) with the 10 key pad and push the RETURN+
button to flip directly back and forth.
Return+ .
4
Press and hold down the RETURN+ button for three seconds. The message, “RETURN CHANNEL
PROGRAMMED !” will appear and you can scan as you wish with the CHANNEL -/+ button. Press
RETURN+ again and you will go back to the Return+ channel you programmed.
To cancel the Return+ channel, press and hold down the RETURN+ button for another three seconds
and the message, “RETURN CHANNEL CANCELED !” appears.
❒ Pressing any number key or turning the TV off will also cancel a Return+ channel.
Download from Www.Somanuals.com. All Manuals Search And Download.
0
1 R E M O T E P R O G R A M M I N G
SETTING THE CATV & VCR CODES
Many CATV & VCR brands have more than one code. If the first code in the list does not work, try the other
codes listed. If your CATV box or your VCR do not respond to any of the codes listed for the manufacturer, use
the remote control for that accessory to operate it.
CABLE BOX OR SATELLITE SETUP FOR RM-C754 AND RM-C751
1) Determine the correct code from the “CATV & Satellite Codes” chart below.
2) Slide the 2-Way Mode Selector Switch to CATV.
3) Press and hold down the DISPLAY button.
4) Enter the 2-digit code with the 10 key pad while continuing to hold down the DISPLAY button.
5) Release the DISPLAY button.
6) Confirm the operation of the cable box.
CATV & Satellite Codes
CABLE BOXES
CODES
CABLE BOXES
CODES
CABLE BOXES
CODES
Memorex
Movietime
NSC
07
Starquest
Sylvania
Tandy
04
19 35
62
ABC
Antronix
Archer
35 01 11 02 33 91 55
44
29 01 44 88 91 63 42 30 52 76
32 39 29 42 44 88 40 38 60
38 40 32
Oak
11 46 10 12 47
16 17
07
13 20 23 24 96 30 84
05 06 78
Teknika
Telecaption
Teleview
Texscan
Tocom
74 54
92 77
32 40 42 78 94
18 19 35
33 34 48 49 01 42 91 73
36 07 66 70
04
40
Belcor
82
82
Panasonic
Paragon
Philips
Pioneer
Popular Mechanics 59
Cablestar
Cabletenna
Cableview
Century
Citizen
Colour Voice
Comtronice
Contec
29 01 44 88 91 76
63 44 42 30 52 88
63 44 42 30 52 88
63 44 42 30 52 88
23
Toshiba
Tusa
Pulsar
Quest
63 44 42 30 52 88 07
01 02 03 04 34 55 83 85 91 93 TV86
95
42 21
10
Uniden Satellite 65 69
RCA
16 17
51 44 88 53
59 63 44 42 30 52 88
14 41
Unika
29 01 44 88 91 63 42 30 52
76
11
01
42 43 44 52 63 88 82
07 50 23 45
64
64
Curtis
Diamond
Drake
Eagle
Eastern
Focus
08 09 56 61 87 90
29 01 44 88 91 76
37 67 71
13 22 58 62 20 40 26 21
28 99
Realistic
Recoton
Regal
Regency
Rembrandt
Runco
United Artists
United Cable
Universal
Videoway
Vid Tech
Vidter
28 99
32 39 29 42 44 88 02 60
07
68 72
59
GCElectronics 63 44 42 30 52 88 82
Gemini 04 85 32 30
Salora
Samsung
Scientific Atlanta 08 09 56 61 87 90
Sheritech
Signal
16 17 06 32 40 42 78 94
Viewstar
Zenith
Zentek
13 22 58 62 20 40 26 21
07 50 23 75
59
General Electric 57
General Instruments 01 02 03 04 34 55 83 85 91 93
95
27
13 22 58 62 20 40 26 04 42 32
42 78 94 21
02
32 40 42 78 94 63 44 30 52 88
16 17
Gerrard
Hamlin
Hitachi
Hytex
63 44 42 30 52 88
14 15 28 41 99
31 79 02 80
11
Signature
SL Marx
Sprucer
DIGITAL
SATELLITE
SYSTEMS
CODES
Jerrold
01 02 03 04 34 55 83 85 91 93
StandadrComponents 32 39 29 42 44 88 18 60
95
Starcom
Stargate
01 04 55
32 40 42 78 94 04 63 44 30 52
88
Macom
Magnavox
Matsushita
31 79 80
25 26 13
16 17
97
98
RCA
Sony
VCR SETUP FOR RM-C754 AND RM-C751
The remote is pre-programmed with the VCR codes for power on and power off, play, stop, fast-forward,
rewind, and channel up and down.
1) Determine the correct code from the “VCR Codes” chart (next page).
2) Slide the 2-Way Mode Selector Switch to TV.
3) Press and hold down the DISPLAY button.
4) Enter the 2-digit code with the 10 key pad while continuing to hold down the DISPLAY button.
5) Release the DISPLAY button.
6) Confirm the operation of the VCR.
❒ When you record a channel, press the PLAY button while continuing to hold down the REC button.
Download from Www.Somanuals.com. All Manuals Search And Download.
1
1
R E M O T E P R O G R A M M I N G
VCR Codes
VCRs
CODES
VCRs
CODES
VCRs
Quarter
Quartz
Quasar
CODES
Admiral
84 40 07 31 06 65
46
31 35 94 27 03 87 34 28 26 29 Homeline
HI-Q
Hitachi
08
16
16
Aiko
Aiwa
Akai
39 02 25 89 94 28 64 70 81
89 15 31 36 46 47 79 94
90 91
28 15 26 29 53 55 59
65 02 15 27 03 05 94
26 29 28 64
65 01 02 05 06 41 42 71 04 18
03 56 92 72
32 33 20 26 28 64 21
Images
ITT
J.C. Penney
American High 01 05
Radix
Radio Shack
Randex
15
31 15
Asha
Astra
03
03 94 52 15 27 89 32 90 91 83 Jensen
89 15 31 36 46 47 79 94
98 03 02 05 06 56 57 72 34 04
99 70 75
65 07 15 16 08 31 32 01 05 84
40 09 03
Audio Dynamics 26 27 88 97 64
JVC
00 85 28 15 26 29 64 53 55 59 RCA
26 28 29 27 64 16
Audiovox
Aventura
Beaumark
15
Kenwood
31 35 94 27 03 87 34 28 26 29 KLH
98 03 02 05 06 56 57 72 34 04 Kodak
35 43
01 05 15
Realistic
99 75
Lloyd
31 35 94 27 03 87 34 28 26 29 Ricoh
30
Belcor
34 35 46 47
16 08 76
10 12 35 87 77 78
15
Lloyd’s
Logik
LXI
11
31 35 94 27 03 87 34 28 26 29 Sanky
15 Sansui
34 35 46 47 03 94 52 15 27 89 Samsung
32 90 91 83
Runco
24
Bell & Howell
Broksonic
Calix
18 24 07 84
43 31 26 28 64 29 03
03 94 52 15 27 89 32 90 91 25
83
Magnasonic
Candle
03 94 52 15 27 89 32 90 91 83
Canon
65 01 02 05 06 41 42 71 04 18 Magnavox
03 56 92 22
65 18 05 25 31 01 24 06 56 35 Sanyo
16 08 76 03
94 27 03 87 34 28 26 29
Scott
10 11 19 74 87 25 12 14
02 15 16 09 08 61 34 19 65 31
67 01 05 39 51 73 70 00 85
34 35 46 47
84 40 07 31 06 65
35 43
03 94 52 15 27 89 32 90 91 83
65 01 02 05 06 41 42 71 04 18
03 56 92 84 40 07 31 06
35 43
Capehart
Carrera
Carver
CCE
Citizen
Classic
Colortyne
Colt
34 35 46 47
Magnin
03 94 52 15 27 89 32 90 91 83 Sears
27 21 01 05 18 24
03 94 52 15 27 89 32 90 91 83 Marantz
18 24
Marta
89 15 31 36 46 47 79 94
Semitsu
35 46
Matsui
03 94 52 15 27 89 32 90 91 26 Sharp
89 15 31 36 46 47 79 94
89 15 31 36 46 47 79 94
27 21 01
31 16 29 83
01 05
Shintom
Shogun
Matsushita
Megasonic
02 15 16 09 08 61 34 19 65 31 Signature
67
35
Craig
03 08 15 43 31 26 28
MEI
01 05
Singer
Crosley
Curtis
31 35 94 27 03 87 34 28 26 29 Memorex
34 35 46 47 03 94 52 15 27 89
65 15 08 31 07 16 01 05 18 84 Sony
23 30 38 50 49 16 17 01 05 48
31 35 94 27 03 87 34 28 26 29
02 39
03 24
Soundesign
STS
32 90 91 83
MGA
19 92 20 21 67 80 95 45
Curtis Mathes
65 01 02 05 06 41 42 71 04 18 MGN
03 56 92
03 94 52 15 27 89 32 90 91 83 Midland
34 35 46 47 25
03 94 52 15 27 89 32 90 91 83 Sylvania
MGN Technology 03 Symphonic
98 03 02 05 06 56 57 72 34 04 Syqmax
65 96 18 05 31 25 01 19 45
31 35 94 27 03 87 34 28 26 29
34 35 46 47
26 29 28 64
31 35 94 27 03 87 34 28 26 29
64
Cyberex
Daewoo
Daytron
DBX
99 75
Tatung
Teac
34 35 46 47
Minolta
39 02 25 89 94 70
19 92 20 21 67 80 95 29 45
26 27 88 97 64
Mitsubishi
Denon
98 03 02 05 06 56 57 72 34 04 Mont. Ward
99 75
65 01 02 05 06 41 42 71 04 18 Technics
03 56 92 84 40 07 31 06
65 01 02 05 06 41 42 71 04 18
03 56 92
Dumont
03 94 52 15 27 89 32 90 91 83 Motorola
31 35 94 27 03 87 34 28 26 29 MTC
89 15 31 36 46 47 79 94
01 05 07 84
31 35 94 27 03 87 34 28 26 29 Teknika
52 15 89 32 90 91 83
31 35 94 27 03 87 34 28 26 29 Thomas
Technivox
89 15 31 36 46 47 79 94
31 36 65 01 15 05
11 31
31 35 94 27 03 87 34 28 26 29
11 31 03
Dynatech
Dynatone
Electrohome
Electron
Telefunken
19 92 20 21 67 80 95 15 45
Multitech
98 03 02 05 06 56 57 72 34 04 NAD
54
TMK
99 75
28 15 26 29 53 55 59
38
10 87 11 12 13 14 08 15 86 37 Nikko
62 19 25 65 58 78 77 31 45 20 Noblex
National
NEC
98 03 02 05 06 56 57 72 34 04 Toshiba
02 25 73 19 45 09
03 94 52 15 27 89 32 90 91 83
03 94 52 15 27 89 32 90 91 83
25
Electrophonic
Emerex
Emerson
99 75
Totevision
Unitech
Vector
26 27 88 97 28 64 29
89 15 31 36 46 47 79 94
03
Vector Research 27 21 01
21 60 66
Olympus
65 01 02 05 06 41 42 71 04 18 Video Concepts
27 21 01 25 20
Encore
65 01 02 05 06 41 42 71 04 18
03 56 92
39 02 25 89 94 70
08 09 51 16
03 56 92
54 15 07 84
84 40 07 31 06 65
65 01 02 05 06 41 42 71 04 18 XR-1000
03 56 92 72 82
Videosonic
Wards
26 27 31 16 29 03
31 01 05 02 08 07 84 40 35 06
56 25 03
31 35 94 27 03 87 34 28 26 29
01 05
Optimus
Optonica
Panasonic
Everex
Fisher
Fuji
01 05 23
Funai
Garrard
GE
Goldstar
Go Video
Gradiente
Granada
31 35 94 27 03 87 34 28 26 29 Paxsonic
03 94 52 15 27 89 32 90 91 83 Yamaha
26 27 31 16 29 28 64
93 23 24 30 18
31
Penney
Pentax
Philco
01 05 15 27 02 39 51 03
65 02 39 70
Zenith
65 03 04 05 06 56 01 57
89 15 31 36 46 47 79 94 27
65 01 02 05 06 41 42 71 04 18
03 56 92 34 35 46 47
65 96 18 05 31 25 01 40
89 15 31 36 46 47 79 94
39 02 25 89 94 54 44 29 70
34 35 46 47
90 91
31
Philips
65 01 02 05 06 41 42 71 04 18 Pilot
03 56 92
01
Pioneer
Portland
Grundig
Harley Davidson 31 35 94 27 03 87 34 28 26 29 Proscan
Harmon/Kardon 21 19 27 20
98 03 02 05 06 56 57 72 34 04
99 75
Harvard
Harwood
35 43
35
Protec
Pulsar
35
34 35 46 47 18 24 03 94 52 15
27 89 32 90 91 83
Headquarter
16
Download from Www.Somanuals.com. All Manuals Search And Download.
2
1 U S I N G T H E M E N U
USING THIS GUIDE:
PICTURE SETTINGS
Throughout this guide there are certain symbols
we use as shorthand to show you what to do.
When you see them, keep these factors in mind:
TINT
-------------||-------------
COLOR
PICTURE
BRIGHT
DETAIL
-------------||-------------
-------------||-------------
-------------||-------------
-------------||-------------
Up and down arrows mean press the MENU
UP or MENU DOWN buttons. Pressing the up
or down buttons allows you to:
• Move vertically in the main menu screen
• Move through a submenu, or
EXIT BY
EXIT
SELECT
OPERATE
BY
BY
• Move to the next letter, number, or other
choice in a submenu, or
PICTURE SETTINGS SCREEN 2
• Back up to correct an error
NOISE MUTING
ON OFF
SET VIDEO STATUS
Left and right arrows mean press the
MENU LEFT or MENU RIGHT button to:
• Select the highlighted item, or
• Select the options in a submenu
EXIT BY
EXIT
SELECT
OPERATE
BY
BY
The “Press Button” means you should
press that button on the remote control
SOUND SETTINGS (Stereo Models Only)
❒
Important information, or a note, about a
feature follows a cube like this one.
BASS
-------------||-------------
-------------||-------------
-------------||-------------
STEREO SAP MONO
TREBLE
BALANCE
MTS
SMALL CAPITAL LETTERS are used when we
refer to buttons … this is important
because some menu functions have the
same name.
ON AIR
TV SPEAKER
ON OFF
EXIT BY
EXIT
SELECT
OPERATE
BY
BY
THE ONSCREEN MENUS:
To bring up the onscreen menu, press any of
the 4-way cursor control (MENU) buttons on the
remote, and the menu will appear on the screen.
The item that appears yellow is the selected item.
GENERAL ITEMS
SET CLOCK
ON/ OFF TIMER
CHANNEL SUMMARY
SET LOCK CODE
When you first turn on the TV, the Picture Settings
menu will appear. However, since Initial Setup is
so important, this guide begins here.
INITIAL SETUP ITEMS
EXIT BY
EXIT
SELECT
OPERATE
BY
BY
AUTO TUNER SETUP
BACKGROUND
CLOSED CAPTION
LANGUAGE
BLACK CLEAR
ENG FRE SPA
❒ If you use the MENU button on the TV’s
front panel, an additional menu
indicating the current channel and the
TV/Video status will appear before the
picture settings screen.
EXIT BY
EXIT
SELECT
BY
BY
OPERATE
Download from Www.Somanuals.com. All Manuals Search And Download.
1
3
I N I T I A L S E T U P
AUTO TUNER SETUP
CLOSED CAPTION
If they are included in a program, you
can view closed captions or text
information.
NOTES:
During Auto Tuner Setup, the TV will
automatically scan through all available
channels and memorize the active
ones so that when you scan, you do
not pick up weak or noisy channels.
During Initial
Setup, the TV will
be programmed
to only receive
active channels.
Once the
To CLOSED CAPTION
To operate and select a caption
or text channel
To AUTO TUNER SETUP
To operate
channels are
activated by the
Auto Tuner Setup
they will be
CAPTION: CC1 CC2 CC3 CC4
TEXT
:
T1 T2 T3 T4
FINISH
included in Scan.
TUNER MODE
CABLE AIR
START
Some weak
channels may be
included or
TO FINISH
omitted during
this procedure.
You can add or
delete any
channels for
scanning in the
Channel Summary,
page 17.
To save settings
To choose CABLE or AIR
To move to START
EXIT when finished
To start Auto Tuner Setup
Note: Captions are usually found on
CC1 and text on T1. The other
caption and text channels are
workable but are for future
purposes.
NOW
PROGRAMMING!
48
The Programming takes approximately
1 to 2 minutes
Note: See page 19 for complete
details on how to access
captioning with the CLOSED
CAPTION button.
PROGRAMMING OVER!
Note: You should perform the Auto
Tuner Setup for both Cable and
Air, if you have cable or a
satellite system.
LANGUAGE
Choose from English, French, or
Spanish on-screen menus and displays.
Note: Noise Muting will not work
while Auto Tuner Setup is
working.
To LANGUAGE
To activate
LANGUAGE
ENG FRE
SPA
EXIT when finished
BACKGROUND BLACK CLEAR
Download from Www.Somanuals.com. All Manuals Search And Download.
4
1 P I C T U R E S E T T I N G S
DETAIL
TINT
NOTES:
Detail allows you to adjust the level of
detail within the picture.
Tint allows you to adjust the levels of
red and green in the picture.
To exit the Picture
Settings menu,
press the EXIT
To DETAIL
button at any time.
To TINT
To make the picture sharper
To make the picture smoother
To move to the next or previous
To accentuate green
To accentuate red
To move to the next or previous
COLOR
NOISE MUTING
Color allows you to adjust both the
vividness and subtlety of the color.
Eliminates noise from channels that
are not broadcasting or are too weak.
To NOISE MUTING
To turn ON/OFF
To COLOR
To make colors more vivid
To subdue colors
Note: Noise Muting will not work
when you operate Auto Tuner
Setup or Channel Summary.
To move to the next or previous
PICTURE
SET VIDEO STATUS
Picture allows you to adjust the range
between black and white in the
picture.
Save Picture Settings as “Choice”.
To SET VIDEO STATUS
To operate
To PICTURE
To increase contrast
To decrease contrast
To move to the next or previous
TINT
-------------||-------------
COLOR -------------||-------------
PICTURE -------------||-------------
BRIGHT -------------||-------------
DETAIL -------------||-------------
BRIGHT
SAVE AS CHOICE
Adjust the degree of light and dark in
the picture.
To operate the TINT option
To move to the next option
To BRIGHT
Repeat the above steps for each setting
To lighten the picture
To darken the picture
To move to the next or previous
To SAVE AS CHOICE
To save settings and exit
Note: Access your “Choice” settings
by pressing the VIDEO STATUS
button on the remote control.
Download from Www.Somanuals.com. All Manuals Search And Download.
1
5
S O U N D S E T T I N G S
BASS
MTS (Multi-Channel
NOTES:
The Bass level adjustment feature
allows you to raise or lower the level of
lower frequencies in the TV’s sound.
Television Sound)
STEREO SETS
ONLY!!
MTS technology gives you a choice
among stereo, mono, and Second
Audio Programs (SAP).
Bass, Treble,
Balance, and MTS
are available on:
To BASS
To emphasize bass
To reduce bass
To move to next
To MTS
• AV-20920
• AV-20921
• AV-27920
MTS
STEREO SAP MONO
TREBLE
ON AIR
MTS has no effect
on normal sound
broadcasts.
The Treble level adjustment feature
allows you to raise or lower the level of
higher frequencies in the TV’s sound.
Select the mode
(The ON AIR arrow tells you if
the current signal contains
Stereo or SAP)
To TREBLE
To increase treble
To decrease treble
To move to next
Note: Keep the TV in STEREO mode
to get the fullest sound
quality.
BALANCE
Note: SAP will allow you to hear an
alternative soundtrack, if
available.
The Balance adjustment feature
allows you to center the TV’s sound
to your needs.
Note: Choose MONO to reduce
excess noise in a program or
channel.
To BALANCE
To shift the speaker balance
to the right
To shift the speaker balance
to the left
To move to next
Some Sound Advice
You can tell if a program is broadcast in stereo by the position of the ON AIR arrow in the MTS
menu. Unfortunately, it is common for some cable companies to squash the transmission of
stereo programs to mono because they only have mono equipment. If connected to a cable
system, the sound is at the mercy of that cable company — if they broadcast in mono, you
receive mono sound regardless of the original stereo programming.
Fortunately, most programs that are broadcast in stereo are aired on the major television
networks. If you connect your TV to an antenna instead of cable, and set the tuner mode in the
Auto Tuner Setup to “Air” instead of “Cable,” you will be able to pick up stereo broadcasts in
stereo.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
1 G E N E R A L I T E M S
TV SPEAKER
SET CLOCK
NOTES:
You can listen to the TV speakers, or
if your set is connected to a stereo,
turn them off to listen to the stereo
speakers.
The Clock is the heart of all timer
functions. You must set the clock
before any timer functions will work.
TV Speaker is
available on:
• AV-20920
• AV-20921
• AV-27920
To SET CLOCK
To operate
To TV SPEAKER
To turn the speaker ON
or OFF
TIME
1 2 : 3 4 AM
START CLOCK
TV SPEAKER
ON OFF
EXIT when finished
To set the hour (AM/PM)
To move to minutes
To set the minutes
Note: TV Speaker will be cancelled
after a power interruption.
Note: Before you set TV Speaker
from Off to On, make sure
that the TV volume level is
low! If the volume is set too
high, the sound will be
To move to START CLOCK
when done with settings
To start the clock
extremely loud.
THANK YOU !!
If you want to synchronize the TV
clock with another clock or time signal,
press LEFT or RIGHT MENU arrow at the
appropriate time, and the clock will start.
Note: If the TV is unplugged or you
experience a power outage,
you must reset the clock in
order for any of your timer
functions to work.
CLOCK SET MESSAGE:
If you do not set the clock but attempt
to use a timer function anyway, you
will get the following message:
PLEASE SET CLOCK FIRST !!
TIME
– – : – – – –
START CLOCK
Download from Www.Somanuals.com. All Manuals Search And Download.
1
7
G E N E R A L I T E M S
ON/OFF TIMER
CHANNEL SUMMARY
NOTES:
Use the On/Off Timer as an alarm to
wake up, as a program reminder, or
as a decoy when you’re out of the
house.
You can add or delete channels from
the channel scanning. You can also
lock out any “unauthorized” viewers
from one or up to all 181 channels.
There are two
sections in Channel
Summary.
To move up and
down a column
(e.g. from channel
to channel) use the
CHANNEL-/+ button.
To ON/OFF TIMER
To operate
To CHANNEL SUMMARY
To operate
ADD
ON TIME
12 : 00 AM
12 : 00 AM
07
To move from item
to item (e.g. from
channel number to
add to lock) use
the arrow up/down
keys.
You can manually set channels to scan
that were too weak to be picked up
during Auto Tuner Setup. (If you have
not performed the Auto Tuner Setup
described on page 13, do so now.)
Conversely, if a channel was too weak
to receive a good picture but was
picked up anyway, delete it by
removing the X.
OFF TIME
CHANNEL
MODE
ONCE EVERYDAY
YES NO
ON/ OFF TIMER
FINISH
Noise Muting will
not work while you
operate the
To set the hour (AM/PM) you
want the TV to turn on
Channel Summary.
To move to minutes
To set the minutes
CHANNEL -/+ to select the channel
To accept ON TIME and to
move to OFF TIME (set time for
TV to turn off)
CH
01
02
03
04
05
ADD
–
:
CH
06
07
08
09
10
ADD
X
–
–
–
–
–
–
:
–
–
–
–
–
X
:
:
:
:
To move to CHANNEL
X
–
X
X
X
To select channel
To move to MODE
X
Choose ONCE or EVERYDAY
To YES NO
To the ADD column
To include or delete from scan
EXIT when finished
Choose YES for on, NO for off
To FINISH
Note: Channels set to scan will be
To save settings
marked with an X.
THANK YOU !!
Note: Some cable systems experience
interference from radio frequen-
cies on Cable Channel 95. If
you like, you can delete this
channel from scanning by
removing the X.
Note: In order for ON/OFF Timer to
work, the clock must be set.
After a power interruption it will
be cancelled.
Note: ON/OFF Timer cannot be set to
locked or guarded channels.
Continued next page ...
Download from Www.Somanuals.com. All Manuals Search And Download.
18 G E N E R A L I T E M S
CHANNEL GUARD - LOCK
SET LOCK CODE
The Lock Code locks and unlocks
Channel Guard. Write this three digit
number down and keep it where
would-be viewers will not look for it!
To CHANNEL SUMMARY
To operate
To the Lock column
To SET LOCK CODE
To operate
The access code zero (0) to
lock or unlock that channel
The padlock icon appears
CH
01
02
03
04
05
ADD
X
:
:
:
:
:
:
CH
06
07
08
09
10
ADD
X
–
–
–
–
–
–
–
X
X
–
Zero (the access code is zero)
X
X
X
–
–
X
LOCK CODE
000
FINISH
Use the CHANNEL-/+ button to go to any
other channel you want to lock
To the first number place
EXIT when finished
To choose the number
CHANNEL GUARD MESSAGE:
To move to the next place
This message appears when a viewer
attempts to watch a guarded channel:
Continue to follow these directions for
all three numbers
THIS CHANNEL IS LOCKED BY
CHANNEL GUARD.
To FINISH
PLEASE ENTER LOCK CODE BY
10 KEY PAD TO UNLOCK IT.
To save settings and exit
NO. –––
Note: If you forget the Lock Code
you can set another one this
same way.
To watch a channel you have locked,
enter the lock code using the 10 key
pad.
Note: After a power interruption you
must reset the lock code.
If the wrong lock code is entered, this
message will flash on the screen:
INVALID LOCK CODE !
Download from Www.Somanuals.com. All Manuals Search And Download.
1
9
B U T T O N
F U N C T I O N S
DISPLAY
VIDEO STATUS
NOTES:
The Display screen shows the current
status of timers and inputs.
The VIDEOSTATUSbutton lets you select the
“Choice” settings of the Set Video Status
menu, or raise the level of detail with
“Game”, or reset to factory settings.
Please note that if
the clock,
DISPLAY
SleepTimer, or
On/Off Timer are
not set, the initial
Display screen
will state “Clock
Not Set,” “Sleep
Timer Off,” and
“On/Off Timer
07
NOW
SLEEP TIMER
ON/ OFF TIMER
ON TIME
“Standard” resets the picture settings
to factory standard levels.
12:20 PM
OFF
EVERYDAY
7:00 PM
10:00 PM
“Choice” consists of the settings that
you saved in the Set Video Status
menu, page 14.
Off,” respectively.
OFF TIME
“Game” enhances video graphics.
❑ The channel or AV input (Channel 07)
❑ Current time (12:20 PM)
VIDEO STATUS
❑ Sleep Timer status minutes remain-
CHOICE
GAME
STANDARD
ing (Off)
❑ On/Off Timer status (Everyday, on
at 7:00 PM, off at 10:00 PM)
❒ Each press of the DISPLAY button
changes the display mode:
SLEEP TIMER
Sleep Timer turns off the TV for you in
case you fall asleep. Program it to
work in intervals of 15 minutes up to
180 minutes.
DISPLAY
TIME
CHANNEL
OFF
SLEEP TIMER
CLOSED CAPTION
View the closed captions or text when
included in a program.
0 15 30 45 60 75 90 105 120 135 150 165 180
CLOSED CAPTION
CC
TEXT
OFF
SLEEP TIMER MESSAGE:
20 seconds prior to the automatic
shut-off, this message will appear:
Note: To change caption or text
channels see page 13.
Note: To access a captioning option
or to turn one off, allow the
display to remain on screen
until it disappears. In a few
seconds the captions will start.
Note: CC2, CC3, CC4, T2, T3, and
T4 are functional, however,
they are for future purposes.
Note: If a large black box covers
80% of your screen, the Text
Mode is probably set. Press
CLOSED CAPTION to turn it off.
GOOD NIGHT ! !
PUSH SLEEP TIMER BUTTONTO EXTEND.
You then have 20 seconds to press the
SLEEP TIMER button to delay turn off for
another 15 minutes.
Download from Www.Somanuals.com. All Manuals Search And Download.
0
2 B U T T O N F U N C T I O N S
NUMBER BUTTONS
RETURN+
There are two kinds of Return…
NOTES :
10 KEY PAD
Press two of the number buttons to move
to single and double digit channels.
Only RM-C754
and RM-C751,
universal remote
controls, have VCR
control buttons.
Return+ — Set a “Return Channel” to
return to after scanning with CHANNEL -/+.
To move to Channel 7:
0 (zero)
RETURN+ and hold for 3 seconds
RETURN CHANNEL
PROGRAMMED !
7 (seven)
Scan with CHANNEL -/+
100 + BUTTON
The 100+ button accesses all channels
above Channel 99.
RETURN+
Note: To cancel a Return channel, press
and hold Return+ for another 3 seconds
until “Return Channel Canceled!” appears.
To move to Channel 124:
100+
Return — Return to the last channel
viewed after moving to another channel
via the 10 key pad.
2 (two)
4 (four)
RETURN+
MUTING
Move to another channel with
the 10 key pad.
The MUTING button turns the sound off
completely when you press it.
RETURN+
MUTING
Note: When PIP is on, the RETURN+
button function affects only the main
screen.
The sound will turn off
completely.
Note: To return the the original volume
press MUTING again.
VCR BUTTONS
RM-C754 and RM-C751 Only. This
remote will control your VCR. You can
play, rewind and fast-forward, record,
pause, stop, channel scan, and power
on and off.
MENU BUTTONS
The MENU buttons allow you to control
the options located in the menu
screens. A complete discussion on
these buttons and on the menu system
is located on page 12.
Note: The remote is preset to control a
JVC VCR. Put in the code 00 for
a JVC brand VCR. For any other
brand, you must set the manufac-
turer’s code (page 11).
TV
VIDEO
Download from Www.Somanuals.com. All Manuals Search And Download.
2
1
T R O U B L E S H O O T I N G
CHECK
PROBLEMS
There is no power
• See if the power cord became unplugged.
• Perhaps you have experienced a blown circuit breaker or fuse or a power outage.
There is no picture • The antenna could be disconnected.
or no sound
• The input mode (TV or Video) could not be set properly, refer to page 20.
• The tuner mode (in the Auto Tuner Setup) could be set improperly, refer to page 13.
• The station may be having difficulties, check to see if other channels are operating normally.
• Check that the batteries are still working and properly installed.
• Make sure there are no objects blocking a clear path from the remote to the TV.
• Check that the TV/CATVswitch is in the proper position (RM-C754 and RM-C751) — set to TV to view television.
Remote control is
not operating or
operating properly
You cannot select a • Maybe you are too far from the TV, you must be within 23 feet (or 7 meters).
certain channel
• Make sure the channels are programmed. See Channel Summary, page 17.
• Perhaps the channel is locked, select it with the 10 key pad and follow instructions.
• Perhaps the On/Off Timer is set, press the power button, check page 17.
• The power was interrupted or the power cord unplugged. Reset the clock, check page 16.
• The Sleep Timer may be set.
The power turns off
by itself
The clock is wrong • The power was interrupted and the clock not reset. Reset the clock, check page 16.
On Timer is blinking • There is a problem with the TV. Unplug the set and call for service.
CHECK
PICTURE
The picture color
quality is poor
• Tint and color may be improperly adjusted. Check page 14.
• Video Status mode may be set to an inappropriate setting. Check page 14.
• There could be interference from another energy consuming appliance, such as a computer,
another TV or VCR. Move any other such appliances farther away from the TV.
There are lines
across the picture
The picture is
spotted
• There could be interference from a running high wattage appliance such as a hair-dryer, vacuum
cleaner, or neon sign. You will have to move the antenna away from the source of the interfer-
ence or change it to a coaxial cable which is less prone to interference.
Double picture
(Ghosts)
• A building or airplane can reflect the original signal producing a second, delayed one. Adjust
the antenna position.
• The antenna may be damaged, disconnected or turned. Check the antenna connection,
page 6. If it is damaged, you will have to replace it.
Snowy picture/
Image noise
Screen is 80% black • Closed Caption Text Mode is on. Press the CLOSED CAPTION button until you select Off.
CHECK
SOUND
Bilingual or stereo
• Make sure the MTS mode is properly set. Refer to page 15 for details on setting MTS Modes.
programscan’tbeheard
There is no sound
• TV Speakers may be turned off in the menu, see page 16.
from the TV speakers
DON’T WORRY ABOUT THIS,IT’S NORMAL
NOT A PROBLEM
Static electricity
• It is normal to feel a surge of static electricity if you brush over or touch the screen.
• It is normal for the TV to emit crackling sounds when turned on or off. Unless the sound or
picture become abnormal, this is fine.
You hear occasional
crackling sounds
Download from Www.Somanuals.com. All Manuals Search And Download.
2
2 L I M I T E D W A R R A N T Y
For Canadian model televisions, see separate sheets for Warranty/Garantie and
JVC Authorized Service Centers in Canada.
JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below TO THE ORIGINAL
PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of original purchase
for the period as shown below (the “Warranty Period”). The picture tube is covered for two years.
Model No.
Serial No.
Parts
Labor
1 YEAR
1 YEAR
This limited warranty is valid only in the fifty (50) United States, The District of Columbia and the Commonwealth of Puerto
Rico.
JVC WILL:
If this product is found to be defective, repair or replace defective parts at no charge to the original owner. Such repairs will
be made during regular business hours only at JVC authorized service centers. All parts repaired or replaced are warrantied
for the remainder of this Warranty Period only. All products and parts should be brought to an authorized service center on
a carry-in basis except for those models with a screen size larger than 25 inches which are covered on an in-home basis.
YOU MUST:
• Return your products to a JVC authorized service center with a copy of your bill of sale. For the authorized JVC service
center nearest you, call toll free (800) 252-5722.
• If service is not locally available, box the product carefully, preferably in its original container, and ship it, insured, to the
nearest authorized service center with a copy of the bill of sale and a letter of explanation as to the problem. Call the toll free
number above for the address.
WHAT IS NOT COVERED:
1) Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty
installation, lack of reasonable care, or if repaired or serviced by anyone other than a service facility authorized by JVC to
render such service, or if connected to any attachment not provided with the products, or if the model or serial number has
been altered, tampered with, or removed;
2) Initial installation, removal for repair, and reinstallation after repair is not covered;
3) Operational adjustments covered in the Owner’s manual, normal maintenance, video and audio head cleaning;
4) Damage that occurs during shipment, due to an act of God, or of consequence to cosmetic changes;
5) Signal reception problems and failures due to line power surges;
6) Video Pick-up Tubes/CCD Image Sensor, Cartridge, Stylus (Needle) are covered for 90 days from the date of purchase;
7) Accessories, and;
8) Batteries (except for rechargeable batteries which are covered for 90 days from date of purchase.)
There are no express warranties except as listed above.
THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILTY, IS LIMITED
TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.
JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THIS PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER
DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, WITHOUT LIMITATION, DAMAGE TO
TAPES, RECORDS OR DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF
THIS WARRANTY, ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY AND
FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion of incidental or consequential damages or limitations on how long the warranty lasts,
so these may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary
state to state.
If you have questions concerning your JVC product, please contact our Customer Relations Department:
JVC COMPANYOF AMERICA
41 Slater Drive
DIVISION OF US JVC CORP.
Elmwood Park, New Jersey 07407
Refurbished products carry a separate warranty. This warranty does not apply for details of refurbished product warranty.
Please refer to the refurbished product warranty information packaged with each refurbished product.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
A U T H O R I Z E D S E R V I C E C E N T E R S 3
For Canadian model televisions, see separate sheets for Warranty/Garantie and
JVC Authorized Service Centers in Canada.
CALL TOLL FREE (800) 252-5722
1)
2)
3)
4)
To locate the JVC Authorized Service Center nearest you.
To purchase parts or accessories.
For customer relations or hook-up assistance.
To locate the JVC authorized dealer nearest you.
JVC SERVICE & ENGINEERING
COMPANY OF AMERICA
DIVISION OF U.S. JVC CORP.
FACTORY SERVICE CENTER LOCATIONS
Dear customer;
In order to receive the most satisfaction from your purchase, read this guide before operating the unit, and before calling
for service make sure you check the Troubleshooting pages at the end of this book. In the event that repair is necessary, or
for the address nearest you, please refer to the factory service center list below, or within the continental United States, call
the toll free number above for an authorized service center. Remember to retain your bill of sale for warranty service.
107 Little Falls Road
Fairfield, NJ 07004-2105
(201) 808-9279
1500 Lakes Parkway
Lawrenceville, GA 30243-5357
(404) 339-2522
705 Enterprise Street
Aurora, IL 60504-8149
(708) 851-7855
5665 Corporate Avenue
Cypress, CA 90630-0024
(714) 229-8011
10700 Hammerly Suite 110
Houston, TX 77043
(713) 935-9331
2969 Mapunapuna Place
Honolulu, HA 96819-2040
(808) 833-5828
230 Eliot Street
Ashland, MA 01721-2377
(508) 881-5923
8192 State Road 84
Davie, FL 33324
(954) 472-1960
890 Dubuque Avenue
South San Francisco, CA 94080-1804
(415) 871-2666
Sophisticated electronic products may require occasional service. Just as quality is a keyword in the engineering
and production of the wide array of JVC products, service is key to maintaining the high level of performance for
which JVC is world famous. The JVC service and engineering organization stands behind our products.
National Headquarters
JVC Service & Engineering Company of America
Division of U.S. JVC Corp.
107 Little Falls Road
Fairfield, NJ 07004-2105
SHIPPING INSTRUCTIONS
THERE ARE NO USER
SERVICEABLE PARTS INSIDE
• Pack the TV in the original carton or one of equivalent size and
strength. Use the original foam cushions or equivalent padding.
• Enclose a letter of explanation stating the problem that exists
and a copy of the bill of sale.
THIS TV! TO PREVENT
ELECTRIC SHOCK, DO NOT
OPEN CABINET AND DO NOT
ATTEMPT TO
• Print your home address on both the outside and inside of the
shipping carton.
SERVICE THIS TVYOURSELF.
• Send to address nearest you in the list above.
Download from Www.Somanuals.com. All Manuals Search And Download.
MODEL
C-13910
C-13911
C-20910
AV-20920
AV-20921
AV-27920
NTSC System
NTSC, BTSC System (Multi Channel Sound)
VHF 2 to 13. UHF 14 to 69
Reception format
Reception range
Sub Mid, Super, Hyper and Ultra bands
(181 channel frequency synthesizer system)
Power consumption
Screen size
Max. 60W / 1.1A
Max. 87W / 1.4A
Max. 87W / 1.4A
Max. 113W / 1.8A
13 inch / 34 cm
measured diagonally
20 inch / 51 cm
measured diagonally
full square
27 inch / 68 cm
measured diagonally
full square
Audio output
Speakers
1W
1W
1W x 2
1.2W x 2
5
1
5
1
5
1
1
1 /16 x 3 /2 / 5 x 9cm 1 /16 x 3 /2 / 5 x 9cm 1 /16 x 3 /2 / 5 x 9 cm
3 /8 / 8 cm round x 1
oval x 1
oval x 2
oval x 2
75 ohms (VHF/UHF) (F-type Connector)
Antenna terminal
Video: 1 Vp-p, 75 ohms
External input jacks
Audio: 500mVrms (-4dBs) high impedance
Variable audio
output
More than 0 to 1550mVrms (+6dBs)
Low impedance (400 Hz when modulated 100%)
—
7
7
1
3
1
3
3
3
1
Dimensions (inches)
WxHxD (cm)
19 /8 x 17 /8 x 19 /2
50.3 x 45.2 x 49.3
14 /8 x 13 /4 x 14 /4
36.4 x 33.4 x 37.4
25 /4 x 23 /8 x 19 /2
65.4 x 59.3 x 49.4
Weight (lbs. / kg.)
19.8 / 9.0
43.2 / 19.6
43.8 / 19.9
68.6 / 31.1
Accessories
Remote control unit x 1 / AA batteries x 2
Specifications subject to change without notice.
LCT0107-001A-A
0198-TN-JII-JIM
Download from Www.Somanuals.com. All Manuals Search And Download.
|