FV5 English 3/12/02 2:49 PM Page 1
For models:
AV-20320
AV-20321
C-20310
COLOR TELEVISION
USER'S GUIDE
C-13310
C-13311
Illustration of AV-20320 and RM-C205
IMPORTANT NOTE TO THE CUSTOMER
In the space below, enter the model number and serial number of your television (located at
the rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of
this guide. Keep this user's guide in a convenient place for future reference. Keep the carton
and original packaging for future use.
Serial Number
Model Number
LCT1146-001A-A
0102-TN-FAA-JIM
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 3
IMPORTANT SAFEGUARDS
CAUTION:
Please read and retain for your safety.
Electrical energy can perform many useful functions. This TV set has been engineered and
manufactured to assure your personal safety. But improper use can result in potential elec-
trical shock or fire hazards. In order not to defeat the safeguards incorporated in this TV set,
observe the following basic rules for its installation, use and servicing.
And also follow all warnings and instructions marked on your TV set.
INSTALLATION
1 Your TV set is equipped with a polarized AC line plug (one blade
(POLARIZED-TYPE)
of the plug is wider than the other). This safety feature allows
the plug to fit into the power outlet only one way. Should you be
unable to insert the plug fully into the outlet, try reversing the
plug. Should it still fail to fit, contact your electrician.
2 Operate the TV set only from a power source as indicated on the TV set or refer to the oper-
ating instructions for this information. If you are not sure of the type of power supply to your
home, consult your TV set dealer or local power company. For battery operation, refer to the
operating instructions.
3 Overloaded AC outlets and extension cords are dangerous, and so are frayed power cords
and broken plugs. They may result in a shock or fire hazard. Call your service technician for
replacement.
4 Do not allow anything to rest on or roll over the power cord, and do not place the TV set
where power cord is subject to traffic or abuse. This may result in a shock or fire hazard.
5 Do not use this TV set near water — for example, near a bathtub, washbowl, kitchen sink, or
laundry tub, in a wet basement, or near swimming pool, etc.
6 If an outside antenna is connected to the TV set, be sure the antenna system is grounded so
as to provide some protection against voltage surges and built-up static charges. Section
810 of the National Electrical Code provides information with respect to proper grounding of
the mast and supporting structure, grounding of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location of antenna discharge unit, connection require-
ments for the grounding electrode.
IMPORTANT RECYCLING INFORMATION
This product utilizes both a Cathode Ray Tube (CRT) and other com-
ponents that contain lead. Disposal of these materials may be regu-
lated in your community due to environmental considerations. For
disposal or recycling information, please contact your local authori-
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 4
7 An outside antenna system should not be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can fall into such power lines or circuits.
When installing an outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be fatal.
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
8 TV sets are provided with ventilation openings in the cabinet to allow heat generated during
operation to be released.
Therefore:
— Never block the bottom ventilation slots of a portable TV set by placing it on a bed, sofa,
rug, etc.
— Never place a TV set in a “built-in” enclosure unless proper ventilation is provided.
— Never cover the openings with a cloth or other material.
— Never place the TV set near or over a radiator or heat register.
9 To avoid personal injury:
— Do not place a TV set on a sloping shelf unless properly secured.
— Use only a cart or stand recommended by the TV set manufacturer.
— Do not try to roll a cart with small casters across thresholds or deep pile carpets.
— Wall or shelf mounting should follow the manufacturer’s instructions, and should use a
mounting kit approved by the manufacturer.
USE
10 Caution children about dropping or pushing objects into the TV set through cabinet open-
ings. Some internal parts carry hazardous voltages and contact can result in a fire or elec-
trical shock.
11 Unplug the TV set from the wall outlet before cleaning. Do not use liquid or an aerosol
cleaner.
12 Never add accessories to a TV set that has not been designed for this purpose. Such addi-
tions may result in a hazard.
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 5
13 For added protection of the TV set during a lightning storm or when the TV set is to be left
unattended for an extended period of time, unplug it from the wall outlet and disconnect the
antenna. This will prevent damage to product due to lightning storms or power line surges.
14 A TV set and cart combination should be moved with care. Quick stops, excessive force,
and uneven surfaces may cause the TV set and cart combination to overturn.
SERVICE
15 Unplug this TV set from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the TV set.
C. If the TV set has been exposed to rain or water.
D. If the TV set does not operate normally by following the operating instructions. Adjust
only those controls that are covered in the operating instructions as improper adjustment
of other controls may result in damage and will often require extensive work by a quali-
fied technician to restore the TV set to normal operation.
E. If the TV set has been dropped or damaged in any way.
F. When the TV set exhibits a distinct change in performance — this indicates a need for
service.
16 Do not attempt to service this TV set yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service person-
nel.
17 When replacement parts are required, have the service technician verify in writing that the
replacement parts he uses have the same safety characteristics as the original parts. Use
of manufacturer’s specified replacement parts can prevent fire, shock, or other hazards.
18 Upon completion of any service or repairs to this TV set, please ask the service technician
to perform the safety check described in the manufacturer’s service literature.
19 When a TV set reaches the end of its useful life, improper disposal could result in a picture
tube implosion. Ask a qualified service technician to dispose of the TV set.
20 Note to CATV system installer.
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of
the NEC that provides guidelines for proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system of the building, as close to the
point of cable entry as practical.
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 6
Table of Contents
UNPACKING YOUR TV . . . . . 7
BUTTON FUNCTIONS . . . . . 37
Menu. . . . . . . . . . . . . . . . . . . 37
Exit. . . . . . . . . . . . . . . . . . . . 37
Display . . . . . . . . . . . . . . . . . . 37
Video Status . . . . . . . . . . . . . . . 38
Sleep Timer . . . . . . . . . . . . . . . . 38
Muting . . . . . . . . . . . . . . . . . . 38
100+ . . . . . . . . . . . . . . . . . . . 39
Return+. . . . . . . . . . . . . . . . . . 39
Input. . . . . . . . . . . . . . . . . . . 39
VCR Buttons . . . . . . . . . . . . . . . 39
TV MODELS and REMOTES
GUIDE . . . . . . . . . . . . . . 8
QUICK SETUP GUIDE . . . . . 10
CONNECTIONS . . . . . . . . . 13
Cable and VCR Connections . . . . . . . 13
Stereo VCR/DVD Connections . . . . . . 15
Connecting to an External Amplifier . . . 15
Connecting to a Camcorder . . . . . . . 16
Headphone or Earphone Connection . . . 16
APPENDICES . . . . . . . . . . 40
Troubleshooting . . . . . . . . . . . . . 40
Warranty . . . . . . . . . . . . . . . . . 41
Authorized Service Centers . . . . . . . 43
Specifications. . . . . . . . . . . . . . . 44
REMOTE CONTROL . . . . . . 17
Remote Control Basics. . . . . 17
Changing the Batteries. . . . . 17
ONSCREEN MENUS . . . . . . 18
Using the Guide . . . . . . . . . . . . . 18
The Onscreen Menus . . . . . . . . . . . 18
Auto Tuner Setup . . . . . . . . . . . . . 19
Channel Summary. . . . . . . . . . . . 20
V-Chip. . . . . . . . . . . . . . . . . . . 21
Set Lock Code. . . . . . . . . 28
Picture Settings
Tint . . . . . . . . . . . . . . . 29
Color . . . . . . . . . . . . . . 29
Picture . . . . . . . . . . . . . 29
Bright . . . . . . . . . . . . . 29
Detail . . . . . . . . . . . . . 29
Noise Muting . . . . . . . . . 30
Set Video Status . . . . . . . . 30
Sound Settings
Bass . . . . . . . . . . . . . . 31
Treble . . . . . . . . . . . . . 31
Balance . . . . . . . . . . . . 31
MTS (Multi-channel Sound) . . 32
TV Speaker . . . . . . . . . . 32
General Items
Auto Clock Set . . . . . . . . . 33
Manual Clock Set. . . . . . . 34
On/Off Timer . . . . . . . . . . 35
Language. . . . . . . . . . . 35
Closed Caption . . . . . . . . 36
Background . . . . . . . . . . 36
6
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 7
Unpacking Your Television
Thank you for your purchase of a JVC Color Television. Before you begin setting up your new
television, please check to make sure you have all of the following items. In addition to this
guide, your television box should include:
1 Remote
Control
Two AA
Batteries
1 Television
Note:Your television
and/or remote control
may differ from the
examples illustrated
here.
INPUT—2
VIDEO
AUDIO
MONO
L
/
R
MENU
CHANNEL
OPERATE
VOLUME
POWER
ON
TIMER
Once you have unpacked your television, the next step is to connect it to your antenna/cable
or satellite system and to connect the audio/video devices you want to use with your televi-
sion. To make these connections you will use plugs like the ones illustrated below.
A/V Input Plug
RF Connectors
Used to connect
audio/video devices like
Used to connect a
coaxial cable from an
VCRs, DVD players, stereo
external antenna or Cable
amplifiers, game consoles,
TV system.
etc.
We recommend that before you start using your new television, you read this entire User’s
Guide so you can learn about your new television’s many great features. But if you’re anxious
to start using your television right away, a quick setup guide follows on pages 10 - 12.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 8
TV Models and Remotes Guide
NOTE: Before you connect your televison to another device, please refer to the proper dia-
grams for your TV and remote, depending on the model that you have purchased.
These will help assist you in understanding how to connect your television to another
device, as well as use the remote to set up your televison.
Rear Panel Diagram
INPUT
OUTPUT
VIDEO—
75‰
(VHF/UHF)
L
L/ MONO
l
AUDIO
I
R
R
MODELS: AV-20320, AV-20321
Front Panel Diagram
INPUT—2
VIDEO
AUDIO
L / MONO
R
MODELS: AV-20320, AV-20321
INPUT
VIDEO AUDIO
MODELS: C-20310, C-13310, C-13311
8
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 9
TV Models and Remotes Guide
VIDEO
SLEEP
TIMER
VIDEO
SLEEP
TIMER
POWER
INPUT
STATUS
POWER
INPUT
STATUS
DISPLAY
DISPLAY
1
2
3
6
1
2
3
6
4
5
8
0
4
5
8
0
7
9
7
9
100+
RETURN+
100+
RETURN+
MUTING
V
CHIP
MUTING
V—CHIP
+
CH
+
CH
VOL
VOL
VOL
VOL
+
+
CH
CH
MENU
EXIT
MENU
EXIT
VCR CONTROL
VCR CONTROL
CHANNEL
POWER TV/VCR
CHANNEL
POWER TV/VCR
REW
PLAY
FF
REW
PLAY
FF
PAUSE
REC
STOP
PAUSE
STOP
REC
RM-C205
RM-C205W
Remote Control RM-C205W
MODEL: AV-20321, C-13311
Remote Control RM-C205
MODEL: AV-20320, C-20310,
C-13310
9
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 10
Quick Setup 1
Getting Started
These quick setup pages will provide you, in three easy steps, with the basic information you
need to begin using your new television right away. This information includes basic instructions
on operating your remote control, making a simple cable/antenna and optional VCR connection
and, finally, information on programming your television's Auto Tuner.
If you have questions, or for more detailed information on any of these steps, please consult
the other detailed sections of this guide.
Step One - The Remote Control
The remote control is the key to operating your
television's many great features. Before you can
operate your remote control, you first need to
install the batteries (included).
Raise the latch on the remote’s back cover to
remove. Insert two batteries carefully noting the “+”
and “–” markings, placing the “–” end in the unit
first. Snap the cover back into place.
Basic Operation
Turn the television on and off by pressing the POWER button at the top right cor-
ner of the remote.
POWER
The four key feature buttons at the center of the remote can be
use for basic operation of the television. The top and bottom
buttons will scan forward and back through the available chan-
nels. The right and left buttons will turn the volume up or down.
These buttons are also marked with four arrows and are also
MUTING
V
CHIP
+
CH
VOL
+
VOL
used with JVC's onscreen menu system. You will need to use
these buttons later in the Quick Setup.
CH
The next step is to connect your television to an antenna or
MENU
EXIT
cable.
10
Proceed to Step Two
"
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 11
Quick Setup 2
Step Two - Making Basic Connections
Next you will need to connect your television to an antenna or cable system. The most basic
antenna/cable connection is shown below. For more detailed connections, such as ones where
a cable box is required, see pages 13 and 14.
Cable/RF connector
INPUT
OUTPUT
VIDEO—
75‰
(VHF/UHF)
L
L/ MONO
l
AUDIO
I
R
R
Illustration of AV-20320
1) Connect an RF cable out from the wall outlet in to the RF Input on the back of the TV.
You may also wish to connect a VCR at this point. A basic stereo VCR connection is shown
below. For detailed instructions on connecting other components or a home theater system,
see pages 13 to 16.
Note: A VCR is not required to operate your television.The connection shown below is for
stereo televisions only (models AV-20320, and AV-20321 only). All others use connections
shown on pages 13 and 14.
AV Cables/Plugs
INPUT
OUTPUT
VIDEO—
75‰
(VHF/UHF)
L/ MONO
IN
l
AUDIO
I
R
OUT
Illustration of AV-20320
1) Connect the yellow video cable out from the VCR’s Video Output, in to the TV’s Video Input
jack.
2) Connect the white audio cable out from the VCR’s Left Audio Output, in to the TV’s Left
Audio Input Jack.
3) Connect the red audio cable out from the VCR’s Right Audio Output, in to the TV’s Right
Audio Input jack.
Finally, once you have finished your connections, plug the power cord into the nearest power
outlet and turn on the television.
Proceed to Step Three
11
"
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 12
Quick Setup 3
Step Three - Auto Tuner Setup
JVC’s onscreen menu system lets you set your television up to meet your own personal view-
ing preferences. The menu screens and their features are discussed in detail in this book. The
menu settings are optional, you can set as many or as few of them as you wish. But to begin
watching your television right away you will need to run the Auto Tuner Setup. This lets your tel-
evision learn the channels it is able to receive. To run the Auto Tuner Setup follow the steps
below.
Press the MENU button on the remote control.
Press the "# buttons to move to AUTO TUNER SETUP
Press the $% buttons to begin AUTO TUNER SETUP
TUNER MODE
:
CABLE AIR
START
$% To choose CABLE (if you are connected to a cable system) or AIR (if you use an antenna)
"# To move to START
$% To start Auto Tuner Setup
The Auto Tuner will now memorize all of the clear, active channels your television can receive.
This will take one or two minutes.
NOW
PROGRAMMING!
48
The Auto Tuner is finished when the message PROGRAMMING OVER! appears onscreen.
The Auto Tuner programming is now complete. You can now begin watching your television, or
you can continue on in this guide for more information on connecting audio/video devices, pro-
gramming your remote control, or using the JVC onscreen menu system to customize your tel-
evision viewing experience.
The Quick Setup is complete
STOP
12
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 13
Connections
Cable and VCR Connections
There are two basic types of antenna or cable connections:
• If you have an antenna or have a cable system that does not require you use a cable box
to select channels, please refer to Diagram #1.
• If you have a cable system that requires the use of a cable box to access any or all of the
channels, please refer to Diagram #2.
• For your convenience, connection to a VCR is also shown in the following diagrams. You
may omit the VCR from your connections if you wish.
Diagram #1
INPUT
OUTPUT
VIDEO—
75‰
(VHF/UHF)
L/ MONO
L
l
AUDIO
I
R
R
IN
OUT
Illustration of AV-20320
1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the VCR.
2) Connect an RF cable from the RF Output of the VCR, in to the RF Input on the back of the
TV.
• Please consult your VCR’s owner’s manual for more information on its operation.
• See page 15 for instructions on making stereo connections with your VCR (for television
models AV-20320, and AV-20321 only).
13
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 14
Connections
Cable and VCR Connections - Continued
Diagram #2
INPUT
OUTPUT
VIDEO—
75‰
(VHF/UHF)
OUT IN
CABLE BOX
L/ MONO
L
l
AUDIO
I
R
R
VCR
(Yellow)
IN
(White)
(Red)
OUT
Illustration of AV-20320
1) Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the cable box.
2) Connect an RF cable from the RF Output on the cable box, in to the RF Input on the back
of the VCR.
3) Connect an RF cable from the RF Output on the VCR, in to the RF Input on the back of the
TV.
• Please consult your VCR’s owner’s manual for more information on its operation.
• See page 15 for instructions on making stereo connections with your VCR (for television
models AV-20320, and AV-20321 only).
The connection diagrams are intended to show some basic connections. Some cable
companies may require special connections to properly use your television. If you fol-
low these diagrams and the television does not work properly, contact your local
cable operator for more connection information.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 15
Connections
Stereo VCR/DVD Connections
If you have a Stereo model television (AV-20320, AV-20321), you can use the connection
shown below for high-quality stereo sound from your HiFi VCR. You can also use this diagram
to connect your television to a DVD player.
Stereo VCR or DVD Player
Illustration of AV-20320
IN
INPUT
OUTPUT
T
VIDEO—
75‰
(VHF/UHF)
L/ MONO
l
AUDIO
I
R
1) Connect the yellow video cable out from the VCR’s Video Output, in to the TV’s Video Input
jack
2) Connect the white audio cable out from the VCR’s Left Audio Output, in to the TV’s Left
Audio Input Jack.
3) Connect the red audio cable out from the VCR’s Right Audio Output, in to the TV’s Right
Audio Input jack.
Connecting to an External Amplifier
Available on Stereo models (AV-20320, AV-20321) only.
INPUT
OUTPUT
VIDEO—
75‰
(VHF/UHF)
L
L/ MONO
l
AUDIO
I
R
R
Illustration of AV-20320
1) Connect the white audio cable from the TV’s Left Audio Output jack to the Amplifier’s Left
Audio Input jack.
2) Connect the red audio cable from the TV’s Right Audio Output jack to the Amplifier’s Right
Audio Input jack.
• See also “TV Speaker” on page 32 for more information on using external speakers.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 16
Connections
Connecting to a Camcorder
You may connect a camcorder to your television by using the front Input Jacks. You may also
connect a game console or other equipment using these jacks. Camcorders may also be con-
nected to the television’s rear input jacks.
INPUT—2
VIDEO
AUDIO
L / MONO
R
Illustration of AV-20320
1) Connect the yellow video cable out from the Camcorder’s Video Output, in to the TV’s
Video Input jack.
2) Connect the white audio cable out from the Camcorder’s Left Audio Output, in to the TV’s
Left Audio Input Jack.
3) Connect the red audio cable out from the Camcorder’s Right Audio Output, in to the TV’s
Right Audio Input Jack.
• If your Camcorder is a mono sound model it will have only one audio jack. Connect it to the
TV’s Left Audio Jack.
Headphone or Earphone Connection
You can connect a pair of headphones or earphone to the television using the headphone jack
on the front panel. Models AV-20320 and AV-20321 have a headphone jack. Models C-13310,
C-13311 and C-20310 have an earphone jack.
1) Plug a headphone/earphone jack into the headphone jack on the television’s front panel.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 17
Remote Control
Remote Control Basics
Before you can operate the remote control, you must first
install the batteries (included). See “Changing the Batteries”
at the bottom of this page for instructions. (For an illustration,
please see page 10.)
•
Press the POWER button to turn the television on or off.
•
•
Press the CH+ and CH– buttons to scan through the chan-
nels. Tap the CH+ or CH– button to move through the chan-
nels one channel at a time.
To move rapidly through the channels using JVC’s
Hyperscan feature, press and hold CH+ or CH–. The chan-
nels will zip by at a rate of five channels per second.
•
•
•
Press VOL+ or VOL– to raise or lower the volume. An indicator
bar will appear onscreen to show you the television volume
level.
The CH+/- and VOL+/– buttons are also used to navigate
JVC’s onscreen menu system.
You can directly access specific channels using the 10-key
pad.
•
•
For more information on remote control button features, see
pages 37 to 39. For information on using the onscreen
menus, see page 18.
Notes: Remote control model RM-C205 is shown at the left.
A different color remote control may have come with your
television.
Changing the Batteries
Raise the latch on the remote’s back cover to remove it.
Insert two AA batteries (supplied), carefully noting the "+" and "–" markings on the batteries
and on the remote control. To avoid a potential short circuit, insert the "–" end first. Be sure to
use only size AA batteries.
When batteries are installed, snap the cover back into place (until it clicks into position).
• If the remote control acts erratically, replace the batteries. Typical battery life is six months to
one year. We recommend using alkaline batteries for longer battery life.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 18
Onscreen Menus
Using the Guide
Certain symbols are used throughout this guide to help you learn about the features of your
new television. The ones you will see most frequently are:
"# Up and Down arrows mean press the CHANNEL UP or CHANNEL DOWN buttons. Pressing
the UP or DOWN buttons let you:
• Move vertically in a main menu screen
• Move through a submenu screen
• Move to the next letter, number, or other choice in a submenu
• Back up to correct an error
• Scan through TV channels (when not in a menu screen)
$% Left and right arrows mean press the VOLUME LEFT or VOLUME RIGHT buttons to:
• Select a highlighted menu item
• Select an item in a submenu
• Select numbers in certain menu options
• Turn the volume up or down (when not in a menu screen)
The "Press Button" icon means you should press the button named on your remote con-
trol. (Button names appear in SMALL CAPITAL LETTERS.)
AUTO TUNER SETUP
CHANNEL SUMMARY
V-CHIP
SET LOCK CODE
SELECT
OPERATE
BY
BY
EXIT BY
EXIT
The Onscreen Menus
To bring up the onscreen menu, press the MENU button on the remote control. The item that
appears in yellow is the one currently selected.
Note: Menus shown in this book are illustrations, not exact replications of the television’s
onscreen displays.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 19
Initial Setup
Auto Tuner Setup
If you have already run the Auto Tuner as part of the quick setup earlier in this guide,
please skip ahead to “Channel Summary” to continue setting up your television.
In Auto Tuner Setup, the TV automatically scans through all available channels, memorizing the
active ones and skipping over blank ones or channels with weak signals. This means when you
scan (using the CHANNEL +/– buttons) you will receive only clear, active channels.
Press the MENU button
"#
To AUTO TUNER SETUP
To operate
$%
$%!
To choose CABLE or AIR
To move to START
"#
$%
To start Auto Tuner Setup
NOW
PROGRAMMING !
48
Programming will take approximately 1 to 2
minutes.
PROGRAMMING OVER!
• Noise Muting will not work during Auto Tuner Setup.
NOTE:
• Some cable systems experience interference from radio frequencies on cable Channel 95.
You may delete this channel from your scan by removing the “X” next to it on the Channel
Summary screen shown on the next page.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 20
Initial Setup
Channel Summary
Channel Summary allows you to customize the line-up of channels received by your TV. You
can add or delete channels from the line-up or prevent any unauthorized viewers from watch-
ing any or all 181 channels.
Press the MENU button
"#
To CHANNEL SUMMARY
To operate
$%
:
CH ADD
01
CH ADD
:
:
:
06
07
08
09
10
02
03
04
05
X
X
X
:
:
X
X
The Channel Summary screen (above) will now be displayed with the channels set to scan
marked with an "X". You can delete channels from the scan by removing the "X". If any chan-
nels were missed during Auto Tuner Setup and you wish to add them, you may by placing an
"X" next to the channel number.
"#
To the ADD column
$%
To include or delete from scan
EXIT when finished
You can block access to a channel by activating the Channel Lock.
"#
To CHANNEL SUMMARY
$%
"#
To operate
To the Lock Column
ZERO to lock or unlock that channel
EXIT when finished
Channel Guard Message
When a viewer attempts to watch a guarded channel, the following message appears:
To watch a channel that you have locked, enter
the Lock Code using the 10 key pad.
If the wrong code is entered, the message
“INVALID LOCK CODE!” will flash on the screen:
THIS CHANNEL IS LOCKED BY
CHANNEL GUARD.
PLEASE ENTER LOCK CODE BY
10 KEY PAD TO UNLOCK IT.
The channel cannot be accessed until the correct
code is entered.
NO. - - - -
• Once a channel has been unlocked, it will remain unlocked until the television is turned off.
• See also “Set Lock Code”, page 28.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 21
V-Chip
Your TV is equipped with V-Chip technology which enables TV Parental Guidelines (for United
States and Canada) and Movie (MPAA) Guideline controls. V-Chip technology allows you to
program your TV to receive, or not to receive, programs based on content according to the
guidelines. Programs which exceed the ratings limits you set will be blocked. When a viewer
attempts to watch a blocked channel, this message appears:
THIS PROGRAMMING EXCEEDS
YOUR RATING LIMITS.
PLEASE ENTER LOCK CODE BY
10 KEY PAD TO UNLOCK IT.
NO. - - - -
The channel will remain blocked until the correct lock code is entered (see page 28 for informa-
tion on setting your lock code).
You can customize the V-Chip settings of your television to match your personal tastes. The
V-Chip menu below is the starting point for your V-Chip settings.
V-CHIP
ON OFF
SET US TV RATINGS
SET MOVIE RATINGS
SET CANADIAN RATINGS ENG
SET CANADIAN RATINGS FRE
UNRATED VIEW BLOCK
FINISH
You can use US V-Chip settings (for programming broadcast from the United States), Canadian
V-Chip settings (for programming broadcast from Canada), and movie ratings.You may use any or
all of the settings (US V-Chip, Canada V-Chip, Movie ratings). Descriptions for setting each of the
three V-Chip formats appear in the next seven pages along with descriptions of the rating cate-
gories.
To access the rating categories:
Press the MENU button
"#
To V-CHIP
$%
To operate (Lock icon
will appear)
Press ZERO to access the V-Chip menu
$%
"#
To turn V-Chip ON or OFF (V-Chip must be turned ON for rating settings to operate)
To move to SET US TV RATINGS, SET MOVIE RATINGS, or SET CANADIAN RAT-
INGS, (see following pages for descriptions of each item).
Special Note about Ratings
Some programs are not broadcast with a ratings signal. Therefore, even if you setup V-Chip
ratings limits, these programs will not be blocked. Parents are cautioned to preview the con-
tents of these programs or movies.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 22
V-Chip
US V-Chip Ratings
U.S. PARENTAL RATING SYSTEMS
Programs with the following ratings are appropriate for children.
❒ TVY is Appropriate for All Children.
Programs are created for very young viewers and should be suitable for all ages, including
children ages 2 - 6.
❒ TV Y7 is for Older Children.
Most parents would find such programs suitable for children 7 and above. These programs
may contain some mild fantasy violence or comedic violence, which children should be able
to discern from reality.
Programs with the following ratings are designed for the entire audience.
❒ TV G stands for General Audience.
Most parents would find these programs suitable for all age groups. They contain little or no
violence, no strong language, and little or no sexual dialog or situations.
❒ TV PG Parental Guidance Suggested.
May contain some, but not much, strong language, limited violence, and some suggestive
sexual dialog or situations. It is recommended that parents watch these programs first, or with
their children.
❒ TV 14 Parents Strongly Cautioned.
Programs contain some material that may be unsuitable for children under the age of 14
including possible intense violence, sexual situations, strong coarse language, or intensely
suggestive dialog. Parents are cautioned against unattended viewing by children under 14.
❒ TV MA Mature Audiences Only.
These programs are specifically for adults and may be unsuitable for anyone under 17 years
of age. TV MA programs may have extensive V, S, L, or D.
Viewing Guidelines
In addition to the ratings categories explained above, information on specific kinds of content
are also supplied with the V-Chip rating. These types of content may also be blocked. The con-
tent types are:
• L stands for strong LANGUAGE
• D stands for suggestive DIALOG
• V/FV is for VIOLENCE/FANTASY VIOLENCE
• S stands for SEXUAL CONTENT
22
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 23
V-Chip
Setting US V-Chip Ratings
Press the MENU button
"#
To V-CHIP
$%
To operate (Lock icon
will appear)
Press ZERO to access the V-Chip menu
V-CHIP
ON OFF
SET US TV RATINGS
SET MOVIE RATINGS
SET CANADIAN RATINGS ENG
SET CANADIAN RATINGS FRE
UNRATED VIEW BLOCK
FINISH
$%
"#
To turn V-Chip ON or OFF
To move to SET US TV RATINGS
$%
To operate
Directions to set US V-Chip Ratings
Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV, S, etc.) and press
the or#!to move the cursor to the correct location. Press or to turn the locking feature on or
off. An item is locked if the icon appears instead of a “—”.
"
$
%
For example. To block viewing of all TV 14 shows, move the cursor to the top row of that
column and add a lock icon. Once you've put a lock on the top row, everything in that column is
automatically locked.
"#
To the TV 14 Column
To turn on the lock
$%
TV TV TV TV TV TV
Y
MA 14
PG
G
Y7
V/ FV
S
L
D
FINISH
"#
To FINISH
To save settings and exit
$%
• If you want to change the setup, move the cursor to the top column and change the lock icon
to “—” by pressing or again. You may then select individual categories to block.
$
%
23
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 24
V-Chip
Setting ratings with the V-Chip button
To access Rating information about a certain program, press the V-CHIP button while viewing
that program. A display like this will appear:
PROGRAM IS RATED
:
TV-PG - V
If you decide you want to block this category of viewing, press "0" while the above screen is
visible, and all programs from that category will be blocked.
Example 1:
If you want to set your V-Chip settings to block all programming above TV PG:
Press ZERO when TV-PG is displayed
TV TV TV TV TV TV
MA 14
PG
G
Y7
Y
V/ FV
S
L
D
All Programming above TV PG will be blocked.
Example 2:
If you want to set your V-Chip settings to block all programming above a current setting such
as TV PG-V (with violence):
Press ZERO when TV-PG - V is displayed
TV TV TV TV TV TV
Y
MA 14
PG
G
Y7
V/ FV
S
L
D
All Programming above TV PG - V (with Violence) will be blocked.
• For Children's programming you can block TV-Y and Y7 programs by Pressing “0” when Y is
displayed during a program. Programming for audiences other than children’s audiences will
not be affected.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 25
V-Chip
Movie Ratings
❒ NR - Not Rated.
This is a film which has no rating. In many cases these films were imported from countries
which do not use the MPAA ratings system. Other NR films may be from amateur producers
who didn’t intend to have their film widely released.
NR (Not Rated) Programming may contain all types of programming including chil-
dren's programming, foreign programs, or adult material.
❒ G – General Audience.
In the opinion of the review board, these films contain nothing in the way of sexual content,
violence, or language that would be unsuitable for audiences of any age.
❒ PG – Parental Guidance.
Parental Guidance means the movie may contain some contents such as mild violence,
some brief nudity, and strong language. The contents are not deemed intense.
❒ PG-13 – Parents Strongly Cautioned.
Parents with children under 13 are cautioned that the content of movies with this rating may
include more explicit sexual, language, and violence content than movies rated PG.
❒ R - Restricted.
These films contain material that is explicit in nature and is not recommended for
unsupervised children under the age of 17.
❒ NC-17 - No One Under 17.
These movies contain content which most parents would feel is too adult for their children to
view. Content can consist of strong language, nudity, violence, and suggestive or explicit
subject matter.
❒ X - No One under 18.
Inappropriate material for anyone under 18.
Directions to set Movie (MPAA) Ratings
Press the MENU button
"#
To V-CHIP
$%
To operate (Lock icon
appears)
Press ZERO to access V-Chip setup options
"#
To SET MOVIE RATINGS
To enter movies menu
$%
For example, to block viewing of X and NC-17 rated from shows:
"#
To the X Column
$%
To turn on the lock
N -17
P-13
X
C
R
G
PG
G
NR
FINISH
"#
$%
"#
$%
To the NC-17 Column
To turn on the lock
To FINISH
To save settings and exit
25
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 26
V-Chip
Canadian V-Chip Ratings
❒ E - Exempt.
Exempt programming includes: news, sports, documentaries and other information
programming, talk shows, music videos, and variety programming.
❒ C – Programming Intended for Children.
Violence Guidelines: There will be no realistic scenes of violence. Depictions of aggressive
behavior will be infrequent and limited to portrayals that are clearly imaginary, comedic or
unrealistic in nature.
❒ C8+ – Programming Intended for Children 8 and Over.
Violence Guidelines: Any realistic depictions of violence will be infrequent, discreet, of low
intensity and will show the consequences of the acts. There will be no offensive language,
nudity or sexual content.
❒ G – General Audience.
Programming will contain little violence and will be sensitive to themes which could affect
younger children.
❒ PG - Parental Guidance.
Programming intended for a general audience, but which may not be suitable for younger
children. Parents may consider some content not appropriate for children aged 8-13.
❒ 14+ - 14 Years and Older.
Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens and
early teens. Programming may contain mature themes and scenes of intense violence.
❒ 18+ - Adult.
Material intended for mature audiences only.
Directions to set Canadian V-Chip Ratings:
Press the MENU button
"#
To V-CHIP
$%
To operate (Lock icon
appears)
Press ZERO to access V-Chip setup options
"#
To SET CANADIAN RATINGS ENG (for English)
To enter ratings menu
$%
18+ 14+ PG
G
C8+
C
FINISH
For example, to block viewing of programming rated 14+ and 18+:
"#
To the 18+ Column
To turn on the lock
$%
"#
To the 14+ Column
$%
"#
To turn on the lock
To FINISH
To save settings and exit
$%
• For instructions on “SET CANADIAN RATINGS FRE (in French)”, please see page 26 in the French
side of this user’s guide.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 27
V-Chip
Unrated Programs
Notes About Unrated Programs:
Unrated programming refers to any programming which does not contain a rating signal.
Programming on television stations which do not broadcast rating signals will be placed in the
“Unrated Programming" category.
Examples of Unrated programs:
Emergency Bulletins
Locally Originated Programming
News
Political Programs
Public Service Announcements
Religious Programs
Sports
Weather
Some Commercials
• TV programs or movies that do not have rating signals will be blocked if the Unrated
Category is set to BLOCK.
Directions to Block Unrated Programs:
You can block programs that are not rated.
Press the MENU button
"#
To V-CHIP
$%
To operate (Lock icon
appears)
Press ZERO to access V-Chip setup options
To UNRATED
"#
UNRATED
VIEW
BLOCK
$%
To VIEW or BLOCK
Press EXIT when done
27
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 28
V-Chip
Set Lock Code
Channel Guard and V-Chip settings are protected by a four-digit Lock Code. Your TV comes
pre-set with a Lock Code of "0000". You may change the code to any four-digit number you
wish. To change the Lock Code, follow the steps below.
Press the MENU button
"#
To SET LOCK CODE
To operate (Lock icon
$%
appears)
Press ZERO to access the Lock Code
LOCK CODE
0 00
0
FINISH
The first digit will be highlighted
$%
"#
To select the number
To move to the next digit
Continue to follow these directions for all four numbers
"#
To FINISH
$%
To save settings and exit
Your Lock Code is now set.
NOTES:
• After a power interruption you must reset the Lock Code.
• Write your Lock Code number down and keep it hidden from potential viewers.
• If you forget the Lock Code, a new code may be set using the steps listed above.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 29
Picture Settings
Tint
Tint allows you to adjust the levels of red and green in your TV picture.
Press the MENU button
"#
%
$
"#
To TINT
To increase the levels of green
To increase the levels of red
To move to the next setting
Color
The color function lets you make all the colors in the TV picture appear either more vivid or
subtle.
Press the MENU button
"#
%
$
"#
To COLOR
To make the colors more vivid
To make the colors more subdued
To move to the next setting
Picture
Picture allows you to adjust the levels of black and white on the TV screen, giving you a darker
or brighter picture overall.
Press the MENU button
"#
%
$
"#
To PICTURE
To increase the level of contrast
To decrease the level of contrast
To move to the next setting
Bright
You can adjust the overall brightness of the TV picture with the Bright control.
Press the MENU button
"#
%
$
"#
To BRIGHT
To lighten the picture
To darken the picture
To move to the next setting
Detail
The Detail feature adjusts the level of fine detail displayed in the picture.
Press the MENU button
"#
%
$
"#
To DETAIL
To make the picture sharper (more detail)
To make the picture smoother (less detail)
To move to the next setting
29
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 30
Picture Settings
Noise Muting
This feature inserts a blank blue screen over channels which are not broadcasting or are too
weak to be received clearly.
Press the MENU button
"#
To NOISE MUTING
$%
To turn Noise Muting ON or OFF
• Noise Muting will not work during Auto Tuner Setup or when you operate Channel Summary.
Set Video Status
With Set Video Status, you can save your own set of picture quality adjustments as “Choice”
and have access to them at the touch of a button.
Press the MENU button
"#
To SET VIDEO STATUS
To operate
$%
TINT
-------------|-------------
COLOR
-------------|-------------
PICTURE -------------
BRIGHT -------------
DETAIL -------------
SAVE AS CHOICE
|-------------
|-------------
|-------------
$%
To set the TINT levels
"#
To move to the next option
Repeat these steps until all levels are set.
"#
To SAVE AS CHOICE
$%
To save settings and exit
• You must use SAVE AS CHOICE to exit the Set Video Status menu, otherwise your prefer-
ences will not be saved.
• You can access your “Choice” settings at any time by pressing the VIDEO STATUS button on
the remote control.
NOTE:
The setting screen will disappear if you do not make any adjustments or move to the next set-
ting in approximately three seconds. Any changes you have made to picture settings up to that
point will be stored. You can exit the Picture Settings menu at any time by pressing the EXIT
button on the remote control.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 31
Sound Settings
Please note: The Sound Settings options are available on Stereo televisions (models
AV-20320 and AV-20321) only.
Bass
You can increase or decrease the level of low-frequency sound in the TV’s audio with the Bass
adjustment.
Press the MENU button
"#
To BASS
%
$
To increase the bass
To decrease the bass
"#
To move to the next setting
Treble
Use Treble to adjust the level of high-frequency sound in your TV’s audio.
Press the MENU button
"#
To TREBLE
%
$
To increase the treble
To decrease the treble
To move to the next setting
"#
Balance
Adjust the level of sound between the TV’s two speakers with the Balance setting.
Press the MENU button
"#
To BALANCE
%
$
To shift the balance towards the right speaker
To shift the balance towards the left
speaker
"#
To move to the next setting
NOTE:
You can leave the Sound Settings menu at any time by pressing the EXIT button on the remote
control.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 32
Sound Settings
MTS (Multi-Channel Television Sound)
MTS technology allows several audio signals to be broadcast at once, giving you a choice in
what you wish to hear with a TV program. In addition to mono or stereo sound, an MTS broad-
cast may also include a Second Audio Program (SAP).
Press the MENU button
"#
To MTS
$%
Select the mode
(The ON AIR arrow tells you if a broadcast is in Stereo and/or contains an SAP).
• Keep the TV in STEREO mode to get the best sound quality. The sound will work in
STEREO mode even if a certain broadcast is in MONO sound only.
• Choose the MONO setting to reduce excessive noise on a certain channel or broadcast.
• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.
TV Speaker
If your TV is connected to a stereo system, you can turn off the TV speakers and listen to the
audio through your stereo.
Press the MENU button
"#
To TV SPEAKER
TV SPEAKER
ON
OFF
$%
To turn the TV's speakers ON or OFF
EXIT when finished
• Before you turn the TV Speaker setting from OFF to ON, make sure that the TV volume
level is low! If the TV volume is set too high, the sound level will be extremely loud.
• After a power interruption, the TV Speaker settings will return to “ON”.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 33
General Items
Auto Clock Set
Before you use any of your TV’s timer functions, you must first set the clock. You may precisely
set your clock using the XDS time signal broadcast by most Public Broadcasting stations. To
set the clock using the XDS signal:
Enter the channel number of your local PBS station
Press MENU
"#
To SET CLOCK
To operate
$%
$%
To AUTO
MODE
AUTO MANUAL
TIME ZONE
D.S.T.
EASTERN
ON OFF
FINISH
"#
To TIME ZONE
$%
To select your time zone
ATLANTIC
CENTRAL
ALASKA
PACIFIC
EASTERN
MOUNTAIN
HAWAII
"#
$%
"#
$%
To move to Daylight Savings Time (D.S.T.)
To turn D.S.T. ON or OFF
To FINISH
To save settings and exit
• If you do not have a PBS station in your local area, you will have to set the clock manually.
See ‘Manual Clock Set’ at the top of the next page for instructions.
• The Daylight Savings Time feature automatically adjusts your TV’s clock for Daylight Savings.
The clock will move forward one hour at 2:00 am on the first Sunday in April. The clock will
move back one hour at 2:00 am on the last Sunday in October.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 34
General Items
Manual Clock Set
To set your clock manually (without using the XDS signal), choose MANUAL from the Set Clock
menu and follow the steps below.
"#
$%
$%
To SET CLOCK
To operate
To MANUAL
MODE
TIME
AUTO MANUAL
--:-- --
START CLOCK
"#
To move to the hour
$%
"#
To set the hour
To move to minutes
$%
"#
To set the minutes
To move to START CLOCK
To start clock and exit
$%
THANK YOU !!
NOTE:
You will have to reset the clock after a power interruption of 90 seconds or longer. You must set
the clock before operating any timer functions.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 35
General Items
On/Off Timer
The On/Off timer lets you program your television to turn itself on or off. You can use it as an
alarm to wake up, to help you remember important programs, or as a decoy when you're not
home.
Press the MENU button
"#
To ON/OFF TIMER
$%
To operate (begins with ON TIME)
$%
To set the hour (AM/PM) you want the TV to turn on
To move to minutes
#
$%
To set the minutes
#
To accept ON TIME and move to OFF TIME (the time the TV will turn off). Set the
OFF TIME the same way as ON TIME
#
To accept OFF TIME and move to
CHANNEL
$%
To select channel
To move to MODE
#
$%
Choose ONCE or EVERYDAY
To ON/OFF TIMER
#
$%
Choose YES to accept the timer setting, choose NO if you don't wish to accept
To FINISH
#
$%
To save settings
Language
You can choose to view your onscreen menus in three languages: English, French, or Spanish.
Press the MENU button
"#
To LANGUAGE
$%
To choose a language
ENGLISH
FRENCH
SPANISH
EXIT when finished
NOTES:
• The On/Off time cannot be set to locked or guarded channels.
• In order for the On/Off timer to work, the clock must be set.
• After a power interruption, the Timer settings must be reset.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 36
General Items
Closed Caption
Use this function to display the Closed Captioning text onscreen (when included in a broad-
cast).
Press the MENU button
"#
To CLOSED CAPTION
To operate
$%
MODE
:
CAPTION
CAPTION
TEXT
:
:
CC1 CC2 CC3 CC4
T1
T2 T3
T4
FINISH
$%
"#
To select CAPTION, TEXT, or OFF
To move to CAPTION or TEXT
$%
"#
To select a caption (CC1 to CC4) or text channel (T1 to T4)
To accept that selection and move to FINISH
$%
To save settings and exit
Background
This feature inserts either a black or clear background behind the onscreen menu displays.
Press the MENU button
"#
To BACKGROUND
BACKGROUND
BLACK CLEAR
$%
To turn Set Background to BLACK or CLEAR
EXIT when finished
NOTES:
• Closed Captions subtitles are usually found on closed caption channel CC1. Some programs
may include additional text information which is usually found on text channel T1. The other
channels are available for future use.
• Closed captioning may not work correctly if the signal being received is weak or if you are
playing a video tape.
• Most broadcasts containing Closed Captioning will display a notice at the start of the pro-
gram.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 37
Button Functions
Menu
The MENU button allows you to access JVC’s onscreen menu system. Press MENU to activate
the onscreen menu system.
• See individual topics (like “Set Video Status”) for specific information on using menus.
Exit
Press the EXIT button to leave a menu screen.
Display
The Display screen shows the current status of timers and inputs.
Press the DISPLAY button
07
NOW
12:20 PM
OFF
EVERYDAY
7:00 PM
10:00 PM
SLEEP TIMER
ON/ OFF TIMER
ON TIME
OFF TIME
• The channel or AV input (Channel 07)
• The current time (12:20 pm)
• Sleep Timer status/minutes remaining (The Sleep Timer is off)
• On/Off Timer status (Set to turn on everyday at 7:00 PM, off at 10:00 PM)
• Each Press of the DISPLAY button changes the display mode:
Display
Time
Channel
Off
Display - Full screen shown above
Time - Shows the current time only
Channel - Shows the current channel
Off - Turns Display off
• You may also turn off the Display at any step by pressing EXIT.
NOTE:
• Please note that if the Clock, Sleep Timer or On/Off Timer are not set, the Display screen will
show: "CLOCK NOT SET", "SLEEP TIMER OFF", and "ON/OFF TIMER OFF" respectively.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 38
Button Functions
Video Status
The VIDEO STATUS button gives you a choice of three TV picture display settings, including a
display of your own preferences.
Standard - Resets the picture display to the factory settings.
Choice - Displays the setting levels you specified on the "Set Video Status" Menu
(see page 30).
Game - Enhanced settings designed especially for video games.
Press the VIDEO STATUS button
CHOICE
GAME
STANDARD
Sleep Timer
The Sleep Timer can turn the TV off for you after you fall asleep. Program it to work in intervals
of 15 minutes, for a total time of up to 180 minutes.
Press the SLEEP TIMER button
0 15 30 45 60 75 90 105 120 135 150 165 180
Sleep Timer Message
20 seconds before the automatic shutoff, this message will appear:
GOOD NIGHT!!
PUSH SLEEP TIMER BUTTON
TO EXTEND.
You then have 20 seconds to press the Sleep Timer button to delay the shutoff for another
15 minutes.
Muting
The MUTING button instantly turns the volume down completely when you press it. Press
MUTING and the volume level will instantly go to zero. To restore the volume to its previous level,
press MUTING again.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 39
Button Functions
100+ Button
Use the 100+ button to directly access channels above Channel 99. For example to move to
channel 124, press 100+, 2 (two), 4 (four).
Return+
The RETURN+ button has two functions:
Return - Returns to the channel viewed just before the channel currently onscreen.
Return+ - Lets you program a specific channel to return to while scanning through the
channels.
RETURN+ and hold for three seconds
RETURN CHANNEL
PROGRAMMED !
Scan using the CHANNEL+/– buttons
RETURN+
You will return to your programmed channel.
• To cancel your Return+ channel, press and hold the RETURN+ button for three seconds. The
message “RETURN CHANNEL CANCELLED!” will appear.
• Return+ works only with CHANNEL+/–. Pressing any number key will cancel Return+.
Input
Selects the signal input source for the television: TV, for Antenna or Cable; Video 1; or Video 2,
for video devices like VCRs, DVD players, or camcorders.
INPUT
AV-20320 and AV-20321 users.
TV VIDEO-1 VIDEO-2
C-13310, C-13311, and C-20310 users.
TV VIDEO
VCR Buttons
You can use this remote control to operate the basic functions of your VCR. These functions
include: play, record, rewind, fast-forward, stop, pause, channel scan, TV / VCR, power on, and
power off.
• Please note: The RM-C205 and RM-C205W remote controls can only be used with
JVC brand VCRs.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 40
Troubleshooting
PROBLEMS
CHECK
There is no power
• See if the power cord became unplugged.
• Check for a blown fuse or circuit breaker or a power outage.
There is no picture
or sound
• The antenna could be disconnected.
• The input mode could be set improperly. See page 39.
• The tuner (Auto Tuner Setup) could be set improperly. See page 19.
• The TV station may be having difficulties. Check to see if other stations are working.
Remote control is not • Check to see that the batteries are still working and properly installed.
operating properly or • Make sure the remote has a clear sight path to the TV.
at all
You cannot select a
certain channel
• You may be too far from the TV. You must be within 23 feet (7 meters).
• Make sure the channels have been programmed. See "Channel Summary", page 20.
• Check to see if the channel is locked. See "Channel Summary - Lock" page 20.
The power turns off
by itself
• Make sure the set did not become unplugged.
• Perhaps the On/Off Timer is set. See page 35.
• Check to see if the Sleep Timer was set. See page 38.
The clock is wrong
• The power was interrupted and the clock was not reset. See page 33.
• There is a problem with the TV. Unplug the set and call for service.
The On Timer is
blinking
The color quality
is poor
• Tint and Color may be improperly adjusted. See page 29.
• The Video Status mode may be turned to the wrong setting. See page 30.
There are lines
across the picture
• There could be interference from another electrical appliance, such as a computer,
another TV or VCR. Move any such appliances further away from the TV.
• There could be interference from a high-wattage appliance, like a hairdryer or vacuum,
operating nearby. Move the antenna away from the appliance or change to a coaxial
cable connection which is less prone to interference.
The picture is spotted
There are double
pictures (ghosts)
• A building or passing airplane can reflect the original signal and produce a second,
slightly delayed one. Adjust your antenna position.
Picture is snowy
(image noise)
• Your antenna may be damaged, disconnected or turned. Check the antenna
connection. If the antenna is damaged, replace it.
Screen is 80% black • The Closed Caption Text mode is on. Turn it off in the Closed Caption Menu, page 36.
Stereo or bilingual
programs can't be
heard
• Make sure the MTS settings are correct. See "MTS" on page 32.
There is no sound
• The TV Speaker option may be turned off. See page 32.
from the TV's speakers
Static electricity
• It is normal to feel static electricity if you brush or touch the screen.
You hear occasional • It is normal for the TV to make crackling sounds when first turned on or off. Unless
crackling sounds
the sound or picture become abnormal, this is fine.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 41
Warranty
JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth
below ONLY TO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE
MATERIALS AND WORKMANSHIP from the date of original retail purchase for the period shown
below (the “Warranty Period”) (PICTURE TUBE is covered for Two (2) years.)
Parts
Labor
1 YEAR
1 YEAR
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE
DISTRICT OF COLUMBIA AND COMMONWEALTH OF PUERTO RICO.
WHAT WE WILL DO:
If this product is found to be defective within the warranty period, JVC will repair or
replace defective parts at no charge to the original owner. Such repair and replacement
services shall be rendered by JVC during regular business hours at JVC authorized
service centers. Parts used for replacement are warranted only for the remainder of this
Warranty Period. All products and parts thereof may be brought to a JVC authorized
service center on a carry-in basis. Televisions with a screen size of 25 inches and larger
may be covered on an in-home basis where such service is available.
WHAT YOU MUST DO FOR WARRANTY SERVICE:
To determine if in-home service is available in your area, either contact the selling dealer (retail-
er) or call 1-800-537-5722 to locate the nearest JVC authorized service center. Service loca-
able, will require clear access to the Television by the service representatives. If in-home service
is not available, carry in service will be provided.
If service is not locally available, box the product carefully, preferably in its original car-
ton, and ship, insured, with a copy of your bill of sale plus a letter of explanation of the
problem to the nearest JVC Factory Service Center, the name and location which will be
given to you by the toll free number.
If you have any questions concerning your JVC Product, please contact our Customer
Relations Department.
WHAT IS NOT COVERED:
This limited warranty provided by JVC does not cover:
1) Products which have been subject to abuse, accident, alteration, modification, tam-
pering, negligence, misuse, faulty installation, lack of reasonable care, or if repaired
or serviced by anyone other than a service facility authorized by JVC to render such
service, or if affixed to any attachment not provided with the products, or if the model
or serial number has been altered, tampered with, defaced or removed;
2) Initial installation, installation and removal from "built-in" entertainment centers and
other mounting systems;
3) Operational adjustments covered in the Owner’s Manual, normal maintenance, video
and audio head cleaning;
4) Damage that occurs in shipment, due to an act of God, and cosmetic damage;
5) Signal reception problems and failures due to line power surge;
6) Video Pick-up Tubes/CCD Image Sensor, Cartridge, Stylus (Needle) are covered for 90
days from the date of purchase;
7) Accessories;
8) Batteries (except that Rechargeable Batteries are covered for 90 days from date of pur-
chase.)
There are no express warranties except as listed above.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 42
Warranty
THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY
OF MERCHANTABILTY, IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY
HEREIN.
JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVE-
NIENCE, OR ANY OTHER DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSE-
QUENTIAL (INCLUDING, WITHOUT LIMITATION, DAMAGE TO TAPES, RECORDS OR
DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY
BREACH OF THIS WARRANTY, ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING
THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE,
ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion of incidental or consequential damages or limi-
tations on how long the warranty lasts, so these exclusions or limitations may not
apply to you. This warranty gives you specific legal rights and you may also have other
rights which vary state to state.
JVC COMPANY OF AMERICA
1700 Valley Road
DIVISION OF JVC AMERICAS CORP.
Wayne, New Jersey 07470
REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY. THIS WARRANTY
DOES NOT APPLY FOR DETAILS OF REFURBISHED PRODUCT WARRANTY.
PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY INFORMATION
PACKAGED WITH EACH REFURBISHED PRODUCT.
For customer use:
Enter below the Model No. and Serial No. which is located either on the rear, bottom or
side of the cabinet.
Retain this information for future reference.
Model No.:
Serial No.:
Purchase Date:
Name Of Dealer:
42
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 43
Authorized Service Centers
QUALITY
SERVICE
HOW TO LOCATE YOUR JVC SERVICE CENTER
TOLL FREE: 1 (800) 537-5722
Dear Customer,
In order to receive the most satisfaction from your purchase, please read the
instruction booklet before operating the unit. In the event that repairs are neces-
sary, or for the address nearest your location within the Continental United
States, please call
1-800-537-5722 for your nearest authorized servicer or visit our website at
Remember to retain your Bill of Sale for Warranty Service.
Don’t service the television yourself
Caution
To prevent electrical shock, do not open the cabinet. There are no user serviceable
parts inside. Please refer to qualified service personnel for repairs.
Accessories
To purchase accessories for your JVC product, you may contact your local JVC
Dealer. From the 48 Continental United States call toll free: 1 (800) 882-2345 or on
the web at www.JVC.com
For service in Canada
To locate your local JVC service center or dealer in Canada please call:
En Français (Montréal):
1 (514) 871-1311
In Eastern Canada:
1 (416) 293-1311
In Western Canada:
1 (604) 270-1311
Or visit us on the web at www.JVC.ca
43
Download from Www.Somanuals.com. All Manuals Search And Download.
FV5 English 3/12/02 2:49 PM Page 44
Specifications
MODEL
C-13310
C-13311
AV-20320
AV-20321
C-20310
NTSC, BTSC System
(Multi-Channel Sound)
Reception Format
Reception Range
NTSC System
VHF 2 to 13, UHF 14 to 69
Sub Mid, Mid, Super, Hyper and Ultra bands
(181 channel frequency synthesizer system)
Power Source
AC 120V, 60Hz
Power
Consumption
60W / 1.1A
87W / 1.4A
Screen Size
13 inch / 34 cm
measured diagonally
full square
20 inch / 51 cm
measured diagonally
full square
Audio Output
Speakers
1W
1W + 1W
3 1/16 / 8 cm
round x 1
2 x 3 1/2 / 5x9 cm
oval x 1
2 x 3 1/2 / 5x9 cm
oval x 2
Antenna Terminal
75 ohms (VHF/UHF) (F-type connector)
External Input
Jacks
Video: 1 Vp-p, 75 ohms
Audio: 500mVrms (-4dBs) high impediance
More than 0 to 1550
Variable Audio
Output
mVrms (+6 dBs)
Low impedance
(400 Hz when modulated
100%)
Headphone Jack
fl3.5 mm x 1
19 7/8 x 17 7/8 x 19 1/2
50.3 x 45.2 x 49.3
Dimensions (Inch) 14 3/8 x 13 1/8 x 14 3/4
WxHxD (cm)
36.4 x 33.4 x 37.4
19.8 / 9.0
43.2 / 19.6
43.8 / 19.9
Weight (lbs / kg)
Accessories
Remote control unit x 1 / AA batteries x 2
*Specifications subject to change without notice.
JVC COMPANY OF AMERICA
Division of JVC Americas Corp.
1700 Valley Road
JVC CANADA, INC.
21 Finchdene Square
Scarborough, Ontario
Canada, M1X 1A7
Wayne, New Jersey, 07470
Download from Www.Somanuals.com. All Manuals Search And Download.
|