JBL Portable Speaker AC2212 00 User Manual

Compact 2-Way Loudspeaker

with 1 x 12" LF

AC2212/00

Key Features:

᭤

100° x 100° Coverage.

PT™ Progressive Transition™

Waveguide for good pattern control

with low distortion.

᭤

Bi-Amp/Passive Switchable.

Optional U-Bracket for easy installation.

Optional planar array frame kit

(see AE Series Array Guide).

Applications:

᭤

Lecture halls

Houses of worship

Speciﬁcations:

Corporate learning centers

Small performing arts facilities

Theatrical sound design

Auditoriums

System:

Frequency Range (-10 dB): 50 Hz – 19 kHz

Frequency Response ( 3 dB): 55 Hz – 17 kHz

Coverage Pattern: 100° x 100°

Directivity Factor (Q): 7.1

Directivity Index (DI): 8.5 dB

Sports facilities

Crossover Modes: Bi-amp/Passive switchable

Passive Crossover Slopes : 4th order (24 dB/oct) Transitional HP & LP, 1.3 kHz

Transducer Power Rating (AES) : LF: 300 W (1200 W peak), 2 hrs

Themed entertainment venues

AC2212/00 is a compact 2-way full-

250 W (1000 W peak), 100 hrs

HF: 50 W (200 W peak), 2 hrs

range loudspeaker system comprised of

one 300 mm (12 in) low frequency

driver and one 38 mm (1.5 in) exit/

44 mm (1.75 in) voice-coil compression

driver. The PT Progressive Transition

waveguide provides wide 100° by 100°

coverage. High-slope passive crossovers

minimize band overlap.

Long-Term System Power Rating (IEC) : Passive mode: 250 W (1000 W peak), 100 hrs

Maximum SPL : Bi-amp mode:

LF: 120 dB-SPL cont avg (126 dB peak)

HF: 126 dB-SPL cont avg (132 dB peak)

Passive mode:

120 dB-SPL cont avg (126 dB peak)

System Sensitivity (1W @ 1m): Passive mode: 95 dB SPL

Transducers:

Low Frequency Driver: 1 x JBL M112-8 300 mm (12 in) driver with 63 mm (2.5 in) voice coil

Nominal Impedance: 8 ohms

The cabinet is ﬁtted with M10

threaded suspension points. Optional

U-bracket, as well as pre-engineered

array bracketry is available for easy

installation. Four threaded inserts locat-

ed on back of the enclosure allow

attachment of an Omnimount™ or

similar mounting bracket.

Sensitivity (1W @ 1m, within operational band): 95 dB SPL

High Frequency Driver: JBL 2418H-1/MTA, 38 mm (1.5 in) exit compression driver,

44 mm (1.75 in) voice coil

Nominal Impedance: 8 ohms

Sensitivity (1W @ 1m): 109 dB SPL

Waveguide: PT-F1010HF

Physical:

Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior

grade 11-ply Finnish birch plywood

AC2212/00 is part of JBL’s AE

Application Engineered Series, a

versatile family of loudspeakers for a

wide variety of ﬁxed installation

applications.

Suspension Attachment: 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded

hardware. 4 x M6 on rear for Omnimount™ 100 Series

Finish: Black DuraFlex™ ﬁnish. White available upon request.

Grille: Powder coated 14 gauge perforated steel, with acoustically trans-

parent black foam backing.

Input Connector: NL4 Neutrik Speakon and CE-compliant covered barrier strip

terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG)

wire or max width 9 mm (.375 in) spade lugs. Speakon in paral-

lel with barrier strip for loop-through.

Environmental Speciﬁcations: Mil-Std 810; IP-x3 per IEC529.

Dimensions (H x W x D): 548 x 355 x 352 mm

(21.6 x 14.0 x 13.9 in)

Net Weight: 19.1 kg (42 lb)

Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers

U-Bracket MTU-4

Optional planar array frame kit. See AE Series Bracket Guide

Bi-amp mode, with recommended active tuning.

Resultant engineered acoustical response of crossover network and components.

AES standard, one decade pink noise with 6 dB crest factor within device's operational band, free air. Standard AES 2 hr rating

plus long-term 100 hr rating are speciﬁed for low-frequency transducers.

IEC standard, full bandwidth pink noise with 6 dB crest factor, 100 hours.

Calculated based on power rating and sensitivity, exclusive of power compression.

Anechoic sensitivity in free ﬁeld, no additional sensitivity gain from boundary loading.

JBL continually engages in research related to product improvement. Changes introduced into existing products without notice

Download from Www.Somanuals.com. All Manuals Search And Download.

are an expression of that philosophy.

᭤ AC2215/64 Compact 2-Way Loudspeaker with 1 x 15" LF

Beamwidth

Horizontal Off-Axis Frequency Response

Directivity Index, Q

Vertical Up Off-Axis Frequency Response

Dimensions

Dimensions in mm (in)

Vertical Down Off-Axis Frequency Response

For more detailed dimensional information, refer to Application Data Sheet

Measurements obtained in full passive crossover mode with no signal

processing. Graphs are from unaltered measured data.

Download from Www.Somanuals.com. All Manuals Search And Download.

Horizontal 1/3 Octave Polars

Download from Www.Somanuals.com. All Manuals Search And Download.

᭤ AC2215/64 Compact 2-Way Loudspeaker with 1 x 15" LF

Vertical 1/3 Octave Polars

JBL Professional

8500 Balboa Boulevard, P.O. Box 2200

Northridge, California 91329 U.S.A.

SS AC2215/64

CRP 10M

7/02

A Harman International Company

Download from Www.Somanuals.com. All Manuals Search And Download.

Compact 2-Way Loudspeaker

with 1 x 15" LF

AC2215/00

Key Features:

᭤

100° x 100° Coverage.

PT™ Progressive Transition™

Waveguide for good pattern control

with low distortion.

᭤

Bi-Amp/Passive Switchable.

Optional U-Bracket for easy installation

(see AE Series Bracket Guide).

Applications:

᭤

Small performing arts facilities

Houses of worship

Theatrical sound design

Auditoriums

Speciﬁcations:

System:

Sports facilities

Frequency Range (-10 dB): 42 Hz – 19 kHz

Frequency Response ( 3 dB): 50 Hz – 17 kHz

Themed entertainment venues

AC2215/00 is a compact 2-way full-

Coverage Pattern: 100° x 100°

Directivity Factor (Q): 7.1

range loudspeaker system comprised of

one 380 mm (15 in) low frequency

driver and one 38 mm (1.5 in) exit/

44 mm (1.75 in) voice-coil compression

driver. The PT Progressive Transition

waveguide provides wide 100° by 100°

coverage. High-slope passive crossovers

minimize band overlap.

Directivity Index (DI): 8.5 dB

Crossover Modes: Bi-amp/Passive switchable

Passive Crossover Slopes : 4th order (24 dB/oct) Butterworth HP & LP, 1300 Hz

Transducer Power Rating (AES) : LF: 275 W (1100 W peak), 2 hrs

250 W (1000 W peak), 100 hrs

HF: 50 W (200 W peak), 2 hrs

Long-Term System Power Rating (IEC) : Passive mode: 250 W (1000 W peak), 100 hrs

Maximum SPL : Bi-amp mode:

LF: 121 dB-SPL cont avg (127 dB peak)

HF: 126 dB-SPL cont avg (132 dB peak)

Passive mode:

The cabinet is ﬁtted with M10

threaded suspension points. Optional

U-bracket is available for easy

installation.

121 dB-SPL cont avg (127 dB peak)

System Sensitivity (1W @ 1m): Passive mode: 97 dB SPL

Transducers:

Low Frequency Driver: 1 x JBL M115-8A 380 mm (15 in) driver with 63 mm (2.5 in) voice coil

Nominal Impedance: 8 ohms

Sensitivity (1W @ 1m, within operational band): 97 dB SPL

High Frequency Driver: JBL 2418H-1/MTA, 44 mm (1.75 in) voice coil

AC2215/00 is part of JBL’s AE

Application Engineered Series, a

versatile family of loudspeakers for a

wide variety of ﬁxed installation

applications.

Nominal Impedance: 8 ohms

Sensitivity (1W @ 1m): 109 dB SPL

Waveguide: PT-F1010HF

Physical:

Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior

grade 11-ply Finnish birch plywood

Suspension Attachment: 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded

hardware

Finish: Black DuraFlex™ ﬁnish. White available upon request.

Grille: Powder coated 14 gauge perforated steel, with acoustically trans-

parent black foam backing.

Input Connector: NL4 Neutrik Speakon and CE-compliant covered barrier strip

terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG)

wire or max width 9 mm (.375 in) spade lugs. Speakon in paral-

lel with barrier strip for loop-through.

Environmental Speciﬁcations: Mil-Std 810; IP-x3 per IEC529.

Dimensions (H x W x D): 637 x 422 x 504 mm

(25.1 x 16.6 x 19.9 in)

Net Weight: 25.0 kg (55 lb)

Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers

U-Bracket MTU-2

Bi-amp mode, with recommended active tuning.

Resultant engineered acoustical response of crossover network and components.

AES standard, one decade pink noise with 6 dB crest factor within device's operational band, free air. Standard AES 2 hr rating

plus long-term 100 hr rating are speciﬁed for low-frequency transducers.

IEC standard, full bandwidth pink noise with 6 dB crest factor, 100 hours.

Calculated based on power rating and sensitivity, exclusive of power compression.

Anechoic sensitivity in free ﬁeld, no additional sensitivity gain from boundary loading.

JBL continually engages in research related to product improvement. Changes introduced into existing products without notice

are an expression of that philosophy.

Download from Www.Somanuals.com. All Manuals Search And Download.

᭤ AC2215/00 Compact 2-Way Loudspeaker with 1 x 15" LF

Beamwidth

Horizontal Off-Axis Frequency Response

Directivity Index, Q

Vertical Up Off-Axis Frequency Response

Dimensions

Dimensions in mm (in)

Vertical Down Off-Axis Frequency Response

For more detailed dimensional information, refer to Application Data Sheet

Measurements obtained in full passive crossover mode with no signal

processing. Graphs are from unaltered measured data.

Download from Www.Somanuals.com. All Manuals Search And Download.

Horizontal 1/3 Octave Polars

Download from Www.Somanuals.com. All Manuals Search And Download.

᭤ AC2215/00 Compact 2-Way Loudspeaker with 1 x 15" LF

Vertical 1/3 Octave Polars

JBL Professional

8500 Balboa Boulevard, P.O. Box 2200

Northridge, California 91329 U.S.A.

SS AC2215/00

CRP 10M

7/02

A Harman International Company

Download from Www.Somanuals.com. All Manuals Search And Download.

Compact 2-Way Loudspeaker

with 1 x 12" LF

AC2212/95

Key Features:

᭤

90° x 50° Coverage.

PT™ Progressive Transition™

Waveguide for good pattern control

with low distortion.

᭤

Bi-Amp/Passive Switchable.

Optional U-Bracket for easy installation.

Optional planar array frame kit

(see AE Series Bracket Guide).

Applications:

᭤

Lecture halls

Houses of worship

Speciﬁcations:

Corporate learning centers

Small performing arts facilities

Theatrical sound design

Auditoriums

System:

Frequency Range (-10 dB): 50 Hz – 19 kHz

Frequency Response ( 3 dB): 55 Hz – 17 kHz

Coverage Pattern: 90° x 50°

Directivity Factor (Q): 8.9

Directivity Index (DI): 9.5 dB

Sports facilities

Crossover Modes: Bi-amp/Passive switchable

Passive Crossover Slopes : 3rd order (18 dB/oct) Butterworth HP & LP, 1700 Hz

Transducer Power Rating (AES) : LF: 300 W (1100 W peak), 2 hrs

Themed entertainment venues

Delay/ﬁll locations of larger systems

AC2212/95 is a compact 2-way full-

250 W (1000 W peak), 100 hrs

HF: 30 W (120 W peak), 2 hrs

Long-Term System Power Rating (IEC) : Passive mode: 250 W (1000 W peak), 100 hrs

range loudspeaker system comprised of

one 300 mm (12 in) low frequency

driver and one 25 mm (1 in) voice-coil

compression driver. The PT Progressive

Transition waveguide provides 90° by

50° coverage. High-slope passive

crossovers minimize band overlap and

well-controlled off-axis response

enhances arrayability.

Maximum SPL : Bi-amp mode:

LF: 120 dB-SPL cont avg (126 dB peak)

HF: 127 dB-SPL cont avg (133 dB peak)

Passive mode:

120 dB-SPL cont avg (126 dB peak)

System Sensitivity (1W @ 1m): Passive mode: 95 dB SPL

Transducers:

Low Frequency Driver: 1 x JBL M112-8 300 mm (12 in) driver with 63 mm (2.5 in) voice coil

Nominal Impedance: 8 ohms

Sensitivity (1W @ 1m, within operational band): 95 dB SPL

High Frequency Driver: JBL 2412H compression driver, 25 mm (1 in) voice coil

The cabinet is ﬁtted with M10

threaded suspension points. Optional

U-bracket, as well as pre-engineered

array bracketry is available for easy

installation. Four threaded inserts locat-

ed on back of the enclosure allow

attachment of an Omnimount™ or

similar mounting bracket.

Nominal Impedance 8 ohms

Sensitivity (1W @ 1m): 112 dB SPL

Waveguide: PT-F95HF-1

Physical:

Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior

grade 11-ply Finnish birch plywood

Suspension Attachment: 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded

hardware. 4 x M5 on rear for Omnimount™ 100 Series

Finish: Black DuraFlex™ ﬁnish. White available upon request.

Grille: Powder coated 14 gauge perforated steel, with acoustically trans-

parent black foam backing.

AC2212/95 is part of JBL’s AE

Application Engineered Series, a

versatile family of loudspeakers for a

wide variety of ﬁxed installation

applications.

Input Connector: NL4 Neutrik Speakon and CE-compliant covered barrier strip

terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG)

wire or max width 9 mm (.375 in) spade lugs. Speakon in paral-

lel with barrier strip for loop-through.

Environmental Speciﬁcations: Mil-Std 810; IP-x3 per IEC529.

Dimensions (H x W x D): 548 x 355 x 352 mm

(21.6 x 14.0 x 13.9 in)

Net Weight: 17.3 kg (38 lb)

Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers

U-Bracket MTU-4

Optional planar array frame kit. See AE Series Bracket Guide

Bi-amp mode, with recommended active tuning.

Resultant engineered acoustical response of crossover network and components.

AES standard, one decade pink noise with 6 dB crest factor within device's operational band, free air. Standard AES 2 hr rating

plus long-term 100 hr rating are speciﬁed for low-frequency transducers.

IEC standard, full bandwidth pink noise with 6 dB crest factor, 100 hours.

Calculated based on power rating and sensitivity, exclusive of power compression.

Anechoic sensitivity in free ﬁeld, no additional sensitivity gain from boundary loading.

JBL continually engages in research related to product improvement. Changes introduced into existing products without notice

are an expression of that philosophy.

Download from Www.Somanuals.com. All Manuals Search And Download.

᭤ AC2212/95 Compact 2-Way Loudspeaker with 1 x 12" LF

Beamwidth

Horizontal Off-Axis Frequency Response

Directivity Index, Q

Vertical Up Off-Axis Frequency Response

Dimensions

Dimensions in mm (in)

Vertical Down Off-Axis Frequency Response

For more detailed dimensional information, refer to Application Data Sheet

Measurements obtained in full passive crossover mode with no signal

processing. Graphs are from unaltered measured data.

Download from Www.Somanuals.com. All Manuals Search And Download.

Horizontal 1/3 Octave Polars

Download from Www.Somanuals.com. All Manuals Search And Download.

᭤ AC2212/95 Compact 2-Way Loudspeaker with 1 x 12" LF

Vertical 1/3 Octave Polars

JBL Professional

8500 Balboa Boulevard, P.O. Box 2200

Northridge, California 91329 U.S.A.

SS AC2212/95

CRP 10M

7/02

A Harman International Company

Download from Www.Somanuals.com. All Manuals Search And Download.

Compact 2-Way Loudspeaker

with 1 x 12" LF

AC2212/64

Key Features:

᭤

60° x 40° Coverage.

PT™ Progressive Transition™

Waveguide for good pattern control

with low distortion.

᭤

Bi-Amp/Passive Switchable.

Optional U-Bracket for easy installation.

Optional planar array frame kit

(see AE Series Array Guide).

Applications:

᭤

Lecture Halls

Houses of worship

Speciﬁcations:

Corporate learning centers

Small performing arts facilities

Theatrical sound design

Auditoriums

System:

Frequency Range (-10 dB): 50 Hz – 19 kHz

Frequency Response ( 3 dB): 55 Hz – 17 kHz

Coverage Pattern: 60° x 40°

Directivity Factor (Q): 17.8

Directivity Index (DI): 12.5 dB

Crossover Modes: Bi-amp/Passive switchable

Sports factilities

Themed entertainment venues

Delay/ﬁll locations of larger systems

AC2212/64 is a compact 2-way full-

Passive Crossover Slopes : 3rd order (18 dB/oct) Transitional HP & LP, 2.1 kHz

Transducer Power Rating (AES) : LF: 300 W (1100 W peak), 2 hrs

250 W (1000 W peak), 100 hrs

HF: 30 W (120 W peak), 2 hrs

Long-Term System Power Rating (IEC) : Passive mode: 250 W (1000 W peak), 100 hrs

range loudspeaker system comprised of

one 300 mm (12 in) low frequency

driver and one 38 mm (1.5 in) exit/

25 mm (1 in) voice-coil compression

driver. The PT Progressive Transition

waveguide provides 60° by 40° cover-

age in vertical cabinet orientation.

High-slope passive crossovers minimize

band overlap and well-controlled off-

axis response enhances arrayability.

Maximum SPL : Bi-amp mode:

LF: 120 dB-SPL cont avg (126 dB peak)

HF: 129 dB-SPL cont avg (135 dB peak)

Passive mode:

120 dB-SPL cont avg (126 dB peak)

System Sensitivity (1W @ 1m): Passive mode: 95 dB SPL

Transducers:

Low Frequency Driver: 1 x JBL M112-8 300 mm (12 in) driver with 63 mm (2.5 in) voice coil

Nominal Impedance: 8 ohms

Sensitivity (1W @ 1m, within operational band): 95 dB SPL

High Frequency Driver: JBL 2412H/MTA, 38 mm (1.5 in) exit compression driver, 25 mm

(1 in) voice coil

Nominal Impedance: 8 ohms

The cabinet is ﬁtted with M10

threaded suspension points. Optional

U-bracket, as well as pre-engineered

array bracketry is available for easy

installation. Four threaded inserts locat-

ed on back of the enclosure allow

attachment of an Omnimount™ or

similar mounting bracket.

Sensitivity (1W @ 1m): 114 dB SPL

Waveguide: PT-F64HF

Physical:

Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior

grade 11-ply Finnish birch plywood

Suspension Attachment: 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded

hardware plus 4 M5 on rear for Omnimount™ 100 Series

Finish: Black DuraFlex™ ﬁnish. White available upon request.

Grille: Powder coated 14 gauge perforated steel, with acoustically trans-

parent black foam backing.

AC2212/64 is part of JBL’s AE

Application Engineered Series, a

versatile family of loudspeakers for a

wide variety of ﬁxed installation

applications.

Input Connector: NL4 Neutrik Speakon and CE-compliant covered barrier strip

terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG)

wire or max width 9 mm (.375 in) spade lugs. Speakon in paral-

lel with barrier strip for loop-through.

Environmental Speciﬁcations: Mil-Std 810; IP-x3 per IEC529.

Dimensions (H x W x D): 548 x 355 x 352 mm

(21.6 x 14.0 x 13.9 in)

Net Weight: 18.1 kg (40 lb)