Initial Technology Flat Panel Television DTV 172 User Manual

DTV-172  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS (FOR DVD PLAYER)  
BASIC OPERATIONS  
PLAY DISCS  
29-33  
29  
PAUSE  
29  
OSD  
29-32  
32  
VOLUME CONTROL  
DVD MENU PLAY  
32  
SELECT WITH NUMBER BUTTONS  
33  
PLAY DISCS IN VARIOUS WAYS  
33-39  
33-34  
34  
AUDIO MODE  
MUTE  
FAST PLAY  
34  
SLOW PLAY  
35  
REPEAT PLAY  
35-36  
36  
ZOOM PLAY  
SELECT SUBTITLES  
36  
ANGLES SELECT  
37  
PROGRAM PLAY  
37-38  
38  
SHUFFLE (RANDOM) PLAY  
MENU SETTING  
39-43  
40-41  
41-42  
42  
GENERAL SETUP  
AUDIO SETUP  
VIDEO SETUP  
PASSWORD SETUP  
42  
PREFERENCES  
43  
MP3 OPERATIONS  
43  
KODAK PICTURE CD PLAYBACK  
USB AND DIGITAL CARD PLAY OPERATION  
TROUBLESHOOTING  
44  
45  
46  
TECHNICAL SPECIFICATIONS  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT INFORMATION  
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE  
THIS PRODUCT TO RAIN OR MOISTURE.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
The lightning flash with arrowhead symbol, within an equilateral triangle,  
is intended to alert the user to the presence of uninsulated ''dangerous  
voltage'' within the product's enclosure that may be of sufficient  
magnitude to constitute a risk of electric shock to persons.  
The exclamation point within a triangle is intended to alert the user to the  
presence of important operation and maintenance (servicing) instructions  
in the literature accompanying the product.  
FCC RF INTERFERENCE STATEMENT  
NOTE:  
This equipment has been tested and found to comply with the limit for a Class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation.  
This equipment generates, uses and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions, may cause harmful interference to  
radio communications. However, there is no guarantee that interference will not occur in a  
particular installation.  
If this equipment does not cause harmful interference to radio or television reception which  
can be determined by turning the equipment off and on, the user is encourage to try to  
correct the interference by one or more of the following measure.  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Correct the equipment into an outlet on a circuit different from that to which the receiver  
is connected.  
Consult the dealer or an experienced radio, TV technical for help.  
Only shielded interface cable should be used.  
page1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY PRECAUTIONS  
The present set has been designed and manufactured to assure personal safety. Improper use  
can result in electric shock or fire hazard. The safeguards incorporated in the present unit will  
protect you if you observe the following procedures in installing, using and servicing. The present  
unit is fully transistorized and does not contain any element that can be repaired by the user.  
1. Read these instructions - All operating instructions must be read and understood before the  
product is operated.  
2. Keep these instructions - These safely and operating instructions must be kept in a safe place  
for future reference.  
3. Heed all warnings - All warnings on the product and in the instructions must be observed closely.  
4. Follow instructions - All operating instructions must be followed.  
5. Attachment - Do not use attachments not recommended by the manufacturer. Use of inadequate  
attachments can result in accidents.  
6. Power source - This product must operate on a power source specified on the model label. If  
you are not sure of the type of power supply used in your home, consult your dealer or local  
power company.  
7. AC cord protection - The AC cords must be routed properly to prevent people from stepping on  
them or objects from resting on them. Check the cords at the plugs and product.  
8. Overloading - Do not overload AC outlets or extension cords. Overloading can cause fire or  
electric shock.  
9. Entering of objects and liquids - Never insert an object into the product through vents or  
openings. High voltage flows in the product, and inserting an object can cause electric shock  
and/or short internal parts. For the same reason, do not spill water or liquid on the product.  
10. Servicing - Do not attempt to service the product yourself. Removing covers can expose you  
to high voltage and other dangerous conditions. Request a qualified service person to  
perform servicing.  
11. Repair - If any of the following conditions occurs, unplug the AC cord from the AC outlet, and  
request a qualified service person to perform repairs.  
a) When the AC cord or plug is damaged.  
b) When a liquid was spilled on the product or when objects have fallen into the product.  
c) When the product has been exposed to rain or water.  
d) When the product does not operate properly as described in the operating instructions. Do  
not touch the controls other than those described in the operating instructions. Improper  
adjustment of controls not described in the instructions can cause damage, which often  
requires extensive adjustment work by a qualified technician.  
e) When the product has been dropped or damaged.  
page2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY PRECAUTIONS  
f) When the product displays an abnormal condition. Any noticeable abnormality in the product  
indicates that the product needs servicing.  
12. Replacement parts - In case the product needs replacement parts, make sure that the service  
person uses replacement parts specified by the manufacturer, or those with the same  
characteristics and performance as the original parts. Use of unauthorized parts can result in  
fire, electric shock and/or other danger.  
13. Safety checks - Upon completion of service or repair work, request the service technician to  
perform safety checks to ensure that the product is in proper operating condition.  
14. Wall or ceiling mounting - When mounting the product on a wall or ceiling, be sure to install  
the product according to the method recommended by the manufacturer.  
15. Unplug the AC cord from the AC outlet before installing the speakers.  
16. Cleaning - Unplug the AC cord from the AC outlet before cleaning the product. Use only with  
a dry cloth to clean this apparatus. Do not use liquid or aerosol cleaners.  
17. Water and moisture - Do not use this product near water such as bathtub, washbasin, kitchen  
sink and laundry tub, swimming pool and in a wet basement. TV set shall not be exposed to  
dripping or slashing and no objects filled with liquid, such as vases, shall be placed on the TV  
set.  
18. Stand - Do not place the product on an unstable cart, stand, tripod or table. Unstable installation  
is likely to make the product fall resulting in serious injuries as well as material damage. Use  
only the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the  
apparatus.  
19. When a cart is used, use caution when moving the cart/apparatus combination to void injury  
from tip-over.  
20. Ventilation - The vents and other openings in the cabinet are designed for ventilation. Do not  
cover or block them since insufficient ventilation can overheat and/or shorten the product’s  
life span. Do not place the product on the bed, sofa, rug or other similar surfaces since they  
can block ventilation openings. This product is not designed for built-in installation; do not  
place the product in an enclosed place such as a bookcase or rack unless proper ventilation  
is provided or the manufacturer's instructions are followed.  
21. The LCD panel used in this product is made of glass. Therefore, it can be broken when the  
product is dropped or gets shock. Be careful not to be injured by glass pieces in case the  
panel is broken.  
22. Heat sources - Do not install near any heat sources such as radiators, heat registers, stoves,  
or other apparatus (including amplifiers) that produce heat.  
23. The LCD panel is a product of very high technology with 2,949,120 thin film transistors, giving  
you fine picture details. Occasionally, a few non-active pixels may appear on the screen as a  
fixed blue, green or red point. Please note that this does not affect your product's performance.  
page3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SUPPLIED ACCESSORIES  
Make sure the following accessories are provided with the product.  
Power adapter  
USB Extension Cable  
AV cables  
POWER  
MPX  
OSD  
OPEN  
1
5
9
2
6
3
7
4
8
AUTO/USB/CARD  
DTV-172  
10/0  
+10  
CAPTION  
MUTE  
LAST  
VOL  
CH  
TV/DVD  
TV MENU  
/AUX/PC  
OK  
DVD TITLE  
DVD MENU  
STOP  
PLAY  
PAUSE  
SKIP  
SEARCH  
ZOOM  
SLOW  
SETUP  
REPEAT  
SUBTITLE  
RETURN  
WIDE  
P. MODE  
A. MODE  
REMAIN  
AUDIO  
ANGLE  
RC-173DT  
Remote control  
Component Video Cable or  
Y/Pb/Pr cable  
User guide  
Audio cable for  
component input  
page4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION  
INSERTING BATTERIES INTO THE REMOTE CONTROL  
Insert supplied batteries via the battery compartment on the back of the remote control.  
Make sure polarity matches the (+) and (-) marks inside the compartment.  
+
-
-
+
USING THE REMOTE CONTROL UNIT  
Use the remote control by pointing it towards the remote  
sensor on the TV. Objects between the remote control and  
the sensor may disrupt operation.  
Effective range is 20 feet but is dependant on what your  
viewing angle is.  
Range can also be affected by direct sunlight on the TV's  
sensor.  
POWER  
MPX  
OSD  
OPEN  
1
5
9
2
6
3
7
4
8
AUTO/USB/CARD  
10/0  
+10  
CAPTION  
MUTE  
LAST  
VOL  
CH  
T
V
/
DV  
D
TV MENU  
/
AU  
X
/
P
C
OK  
DVD TITLE  
DVD MENU  
STOP  
PLA  
Y
PAUSE  
SKIP  
SEARCH  
ZOOM  
SLOW  
SETUP  
RETURN  
WIDE  
P
.
MODE  
REMAIN  
AUDIO  
REPEAT  
A. MODE  
SUBTITLE  
ANGLE  
RC-173DT  
CAUTIONS REGARDING REMOTE CONTROL UNIT  
Do not expose remote to liquids, direct sunlight or shock.  
The remote control unit may not work properly if the remote sensor window of the Display is  
under direct sunlight or strong lighting. In such case, change the angle of the lighting or Display,  
or operate the remote control unit closer to the remote sensor window.  
page5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FUNCTIONAL OVERVIEW  
FRONT VIEW  
4
5
6
7
8
CH  
CH  
VOL  
VOL  
TV/DVD/AUX/PC  
9
USB  
10  
11  
SD/  
MMC  
MEMORY  
STICK  
DVD/CARD/USB  
12  
STOP  
PLAY  
13  
14  
EJECT  
15  
3 2  
1
1) REMOTE SENSOR  
2) POWER ON INDICATOR  
3) STANDBY INDICATOR  
4) TV/DVD/AUX/PC: Use to select the AV signal source between: TV, DVD,AUX-Video, AUX-S-  
Video, AUX-Component,PC, and use the OK button to confirm.  
5) MUTE: Mute the sound.  
6) PREV/NEXT (CH+/-): To skip to the previous/next chapter (previous/next channel).  
7) VOLUME+/-: Use to adjust the volume.  
8) POWER BUTTON: Use to turn the unit on and off.  
9) DISC SLOT: Insert a DVD or CD disc to play under DVD status.  
10) USB  
11) MULTI MEDIA CARD/SD/MEMORY STICK  
12) DVD/CARD/USB: In DVD status, when there are USB and MMC/SD/MEMORY STICK card  
being played, use to shift among DVD, USB and CARD.  
13) STOP: Use to stop the DVD playback.  
14) PLAY BUTTON: Use to begin the DVD playback.  
15) EJECT BUTTON: Use to eject the disc being played in the disc slot.  
page6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FUNCTIONAL OVERVIEW  
REAR VIEW  
AV1 IN  
VIDEO  
AUDIO  
L
1
2
3
S-VIDEO  
AV OUT  
VIDEO  
AUDIO  
R
L
R
C
R /  
B /  
Y
P
P
R
L
C
B
AUDIO  
R
AV2 IN  
AUDIO  
VGA  
4
5
6
PHONES  
DC IN  
1) AV1 IN (Composite Video, S-Video and Audio In)  
2) AV OUT (Composite Video and Audio Out)  
3) AV2 IN (Component Video and Audio In)  
4) VGA, Audio (PC Input)  
5) PHONES  
6) DC IN  
page7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FUNCTIONAL OVERVIEW  
REMOTE CONTROL  
34  
33  
POWER  
OSD  
OPEN  
MPX  
32  
1
1
2
6
3
7
4
5
9
8
AUTO/USB/CARD  
2
31  
30  
10/0  
+10  
3
4
CAPTION  
MUTE  
LAST  
VOL  
CH  
29  
28  
5
6
TV/DVD  
TV MENU  
/AUX/PC  
7
8
9
OK  
DVD TITLE  
DVD MENU  
STOP  
27  
PLAY  
PAUSE  
10  
11  
12  
26  
25  
24  
23  
22  
21  
20  
SKIP  
SEARCH  
ZOOM  
SLOW  
SETUP  
REPEAT  
SUBTITLE  
RETURN  
WIDE  
13  
14  
15  
16  
17  
P. MODE  
A. MODE  
REMAIN  
AUDIO  
ANGLE  
19  
18  
RC-173DT  
1) POWER: Use to turn the unit on and off.  
2) Number Buttons: Use to set the channel and to enter DVD chapter numbers.  
3) CAPTION: Use to select close caption mode.  
4) VOLUME+/-: Use to adjust the volume.  
5) LAST: Press to return to the previous channel in normal viewing mode.  
6) TV/DVD/AUX/PC: Use to bring up the AV signal source selection screen and use the  
buttons to select between: TV, DVD/USB/CARD, AUX-Video, AUX-S-Video, AUX-  
Component,PC, and press the OK button to confirm.  
/
7) Cursor Buttons: Use to navigate in menus.  
page8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FUNCTIONAL OVERVIEW  
REMOTE CONTROL (CONTINUED)  
8) OK: Use to confirm your selections.  
9) DVD TITLE: Use to bring up the DVD title menu.  
10) PLAY:Use to begin the DVD playback.  
11)PAUSE:Use to pause the DVD playback.  
12) PREV/NEXT: Use to skip to the previous/next chapter.  
13) ZOOM: Use to zoom the DVD playback picture.  
14) SLOW: Use to slow the DVD playback speed.  
15) P. MODE: Use to shift DVD play mode.  
16) REMAIN: Use to display the time of the DVD playback.  
17) A. MODE: Use to shift the DVD playback audio mode.  
18) AUDIO: Use to shift DVD audio language.  
19) SUBTITLE: Use to shift DVD subtitle language.  
20) ANGLE: Use to shift DVD viewing angle.  
21) REPEAT: Use to repeat the DVD playback.  
22) WIDE: In DVD mode, use to set TV display mode.  
23) SETUP: Use to bring up DVD setup menu.  
24) RETURN: Return to the previous menu screen.  
25) FF/FR: Use to play DVD fast forward/backward.  
26) STOP: Use to stop the DVD playback.  
27) DVD MENU: Use to bring up the DVD root menu.  
28) TV MENU: Use to bring up TV menu; and exits TV menu by pressing again.  
29) CH+/-:Use to skip to the previous/next channel.  
30) MUTE: Mute the sound.  
31) AUTO/USB/CARD: Auto adjustment for PC signals. In DVD status, use to shift among DVD,  
USB and CARD.  
32) OPEN( ):Use to eject the disc being played in the disc slot.  
33) OSD: Use to bring up the DVD On-Screen-Display.  
34) MPX: Use to select MPX mode.  
page9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
page10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONNECTIONS  
1. CONNECT TO POWER  
a. Connect the mini plug of the AC power adapter to DC IN jack on the back of the DTV-172.  
b. Connect the power plug of the AC power adapter to the power socket.  
2. SYSTEM CONNECTIONS  
a. Using the antenna input: Connect the antenna terminal from an antenna or cable/satellite  
receiver to the antenna input terminal on the DTV-172; use the TV/DVD/AUX/PC button and  
the  
/
buttons to set the DTV-172's signal source to "TV".  
b. Using the AV1 RCA Video/Audio input: Connect compatible AV equipment to the DTV-172  
through the AV1 IN jacks on DTV-172 (Composite Video and Audio input jacks); use the  
TV/DVD/AUX/PC button and the  
Video".  
/
buttons to set the DTV-172's signal source to "AUX-  
c. Using the AV1 S-Video and RCA Audio input: Connect AV equipment to the DTV-172  
through the AV1 IN jacks on DTV-172 (S-Video and Audio input jacks); use the  
TV/DVD/AUX/PC button and the  
Video”.  
/
buttons to set the DTV-172’s signal source to “AUX-S-  
d. Using the AV2 Component input: The AV2 input may be used for Progressive scan or HDTV  
inputs; use the TV/DVD/AUX/PC button and the  
source to "AUX-Component".  
/
buttons to set the DTV-172's signal  
e. Using the VGA connector: Connect a PC computer to the DTV-172 through the VGA socket  
on DTV-172. The Mini-plugged next to the VGA input is for audio associated with this type of  
signal. Audio cables for this purpose are supplied with the DTV-172. Use the TV/DVD/AUX/PC  
button and the  
/
buttons to set the DTV-172’s signal source to “PC”. DTV-172 monitor’s  
native resolution for computer use is 1024x768.  
f. Using the AV out, RCA Video/Audio output: Connect the DTV-172 to another TV Monitor  
through the AV OUT jacks on DTV-172 (Composite Video and Audio output jacks); now you  
can use the TV Monitor as an external monitor. Signals from the Antenna, AV1 and Internal DVD  
player will be available at this point.  
page11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATIONS  
POWER  
TV/DVD/  
POWER  
OSD  
OPEN  
MPX  
AUX/PC  
POWER  
1
5
9
2
6
3
7
4
CH  
CH  
VOL  
VOL  
TV/DVD/AUX/PC  
8
AUTO/USB/CARD  
10/0  
+10  
CAPTION  
MUTE  
LAST  
VOL  
CH  
TV/DVD/  
AUX/PC  
TV/DVD  
/AUX/PC  
TV MENU  
OK  
DVD TITLE  
DVD MENU  
STOP  
PLAY  
PAUSE  
SKIP  
SEARCH  
ZOOM  
SLOW  
SETUP  
REPEAT  
SUBTITLE  
RETURN  
WIDE  
P. MODE  
A. MODE  
REMAIN  
AUDIO  
ANGLE  
TURNING ON THE POWER  
1. Press POWER button on the front panel to turn on the TV set. The STANDBY/ON indicator  
lights up green.  
2. If the STANDBY/ON indicator still lights up red, press POWER on the remote control to turn  
the TV set on.  
TURNING OFF THE POWER  
1. Press POWER on the remote control, the image on the screen disappears and the  
STANDBY/ON indicator changes from green to red.  
2. Press the POWER button on the front panel to turn the TV set off.  
NOTE: Small amounts of electric power is still consumed even when the power is turned off.  
TV/AV MODE SELECTION  
By pressing the TV/DVD/AUX/PC on the TV set and confirming by the OK button, you can  
change the mode as follows:  
TV  
DVD/USB/CARD  
AUX-Video  
AUX-S-Video  
AUX-Component  
PC  
page12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WATCHING TV  
TURNING ON THE POWER  
1. Press POWER button on the front panel to turn on the TV set. The STANDBY/ON indicator  
lights up green.  
2. If the STANDBY/ON indicator still lights up red, press POWER on the remote control to turn  
the TV set on.  
TURNING OFF THE POWER  
1. Press POWER on the remote control, the image on the screen disappears and the  
STANDBY/ON indicator changes from green to red.  
2. Press the POWER button on the front panel to turn the TV set off.  
NOTE: Weak electric power is still consumed even when the power is turned off.  
SIMPLE BUTTON OPERATIONS FOR CHANGING CHANNELS  
You can change channels in several ways.  
Using CH+/- on the remote unit  
POWER  
OSD  
OPEN  
MPX  
CH+/-  
1
5
9
2
6
3
7
4
8
AUTO/USB/CARD  
CH  
CH  
VOL  
VOL  
TV/DVD/AUX/PC  
10/0  
+10  
CAPTION  
MUTE  
LAST  
CH+/-  
VOL  
CH  
TV/DVD  
TV MENU  
/AUX/PC  
OK  
DVD TITLE  
DVD MENU  
STOP  
PLAY  
PAUSE  
SKIP  
SEARCH  
ZOOM  
SLOW  
SETUP  
REPEAT  
SUBTITLE  
RETURN  
WIDE  
P. MODE  
A. MODE  
REMAIN  
AUDIO  
ANGLE  
1. Press CH+ to increase channel number.  
2. Press CH- to decrease channel number.  
NOTE: CH+/- on the TV set operates the same as CH+/- on the remote unit.  
page13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WATCHING TV  
Using number buttons on the remote unit  
POWER  
OSD  
OPEN  
MPX  
1
5
9
2
6
3
7
4
NUMBER BUTTONS  
8
AUTO/USB/CARD  
10/0  
+10  
CAPTION  
MUTE  
LAST  
VOL  
CH  
Select the channels directly by pressing the number buttons.  
EXAMPLE:  
To select a 1-digit channel (e.g. channel 2):  
Press 2 .  
To select a 2-digit channel (e.g. channel 12):  
Press 1 ,followed by 2 .  
USING LAST ON THE REMOTE UNIT  
POWER  
OSD  
OPEN  
MPX  
1
5
9
2
6
3
7
4
8
AUTO/USB/CARD  
10/0  
+10  
CAPTION  
MUTE  
LAST  
VOL  
CH  
LAST  
TV/DVD  
TV MENU  
/AUX/PC  
OK  
DVD TITLE  
DVD MENU  
Press LAST to switch the currently tuned channel to the previous tuned channel.  
Press LAST again to switch back to the currently tuned channel.  
page14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WATCHING TV  
SIMPLE BUTTON OPERATION FOR CHANGING VOLUME/SOUND  
Changing the volume  
You can change the volume on the front panel or on the remote control unit.  
POWER  
OSD  
OPEN  
MPX  
1
5
9
2
6
3
7
4
8
AUTO/USB/CARD  
10/0  
+10  
CAPTION  
MUTE  
LAST  
VOLUME+/-  
VOL  
CH  
TV/DVD  
/AUX/PC  
TV MENU  
OK  
1. Press VOL+ to increase the volume.  
2. Press VOL- to decrease the volume.  
Using MUTE on the remote control  
Press MUTE to mute the current sound output.  
POWER  
OSD  
OPEN  
MPX  
1
5
9
2
6
3
7
4
8
AUTO/USB/CARD  
10/0  
+10  
CAPTION  
MUTE  
LAST  
VOL  
CH  
MUTE  
1. Press MUTE . ''  
'' will display on the screen.  
2. Press MUTE again to cancel the mute.  
page15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MENU ADJUSTMENT  
TV TUNER ADJUSTMENT  
Press TV MENU to bring up the TV menu screen.  
Press  
/
to select "Settings" and press to enter into the items below ''Settings''.  
NOTE: Only when in TV status, there is "TV Tuner"option below "Settings".  
Make sure press TV MENU to exit TV menu screen before other operatings.  
TV Source  
This will help you to select the TV's signal source.  
1. Press TV MENU to bring up the TV menu screen.  
2. Press  
/
to select "Settings" and press to select "TV Tuner".  
3. Press to enter "TV Tuner" menu.  
page16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MENU ADJUSTMENT  
TV TUNER ADJUSTMENT (CONTINUED)  
4. Press  
5. Press  
/
/
to select "TV Source".  
to select your desired TV source between Antenna and Cable; press OK to  
return; press TV MENU to exit.  
Automatic channel search  
Channel auto search finds and memorizes all channels viewable in your area. Select one  
between ANTENNA and CABLE before this operation.  
1. Press TV MENU to bring up the TV menu screen.  
2. Press  
3. Press to enter "TV Tuner" menu.  
4. Press to select "Auto Search".  
/
to select "Settings" and press to select "TV Tuner".  
/
5. Press to begin the searching. Wait until the searching ends.  
NOTE: The illustrations and on-screen displays in this manual are for explanation purposes and  
may vary from the actual operations.  
Fine tune  
1. Press TV MENU to bring up the TV menu screen.  
2. Press  
3. Press to enter "TV Tuner" menu.  
4. Press to select "Fine Tune".  
5. Press to enter "Fine Tune" screen.  
6. Press to tune for a better picture and sound; press OK to return; press TV MENU to exit.  
Channel skip  
1. Press TV MENU to bring up the TV menu screen.  
2. Press to select "Settings" and press to select "TV Tuner".  
3. Press to enter "TV Tuner" menu.  
/
to select "Settings" and press to select "TV Tuner".  
/
/
/
4. Press  
5. Press  
/
/
to select "Channel Skip".  
to select between "On" and "Off"; press OK to return; press TV MENU to exit.  
Current channel number selection  
1. Press TV MENU to bring up the TV menu screen.  
2. Press  
/
to select "Settings" and press to select "TV Tuner".  
3. Press to enter "TV Tuner" menu.  
4. Press  
5. Press  
/
/
to select "Current Channel".  
to select a current channel number you want; press OK to return; press  
TV MENU to exit.  
page17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MENU ADJUSTMENT  
CONTENT BLOCKING  
Password  
1. Press TV MENU to bring up the TV menu screen.  
2. Press  
/
to select "Settings" and press to select "Content Blocking".  
3. Press to enter "Content Blocking (Password)" menu.  
4. Press to select "Enter" and press to enter the password.  
5. Press  
/
to select digit and press  
/
to change the selected digit.  
6. Press to select "OK" and press OK to check the password. Then there will be "Change"  
and "Clear" under "Enter".  
7. Press to select "Change" and press to change the password.  
8. Press  
/
to select digit and press  
/
to change the selected digit.  
9. Press to select "OK" and press OK to confirm your change.  
10. Press to select "Clear" and press  
TV MENU to exit.  
to clear the password; press OK to return; press  
NOTE:The preset password is 000000.  
page18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MENU ADJUSTMENT  
PICTURE ADJUSTMENT  
Press TV MENU to bring up the TV menu screen.  
Press  
/
to select ''Picture'' and press to enter into below items.  
Contrast  
1. Press TV MENU to bring up the TV menu screen.  
2. Press  
3. Press  
4. Press  
/
/
/
to select ''Picture''.  
to move to ''Contrast''.  
to adjust the picture contrast; press OK to return; press TV MENU to exit.  
Brightness  
1. Press TV MENU to bring up the TV menu screen.  
2. Press  
3. Press  
4. Press  
Color  
/
/
/
to select ''Picture''.  
to move to ''Brightness''.  
to adjust the picture brightness; press OK to return; press TV MENU to exit.  
1. Press TV MENU to bring up the TV menu screen.  
2. Press  
3. Press  
4. Press  
/
/
/
to select ''Picture''.  
to move to ''Color''.  
to adjust the picture color; press OK to return; press TV MENU to exit.  
Sharpness  
1. Press TV MENU to bring up the TV menu screen.  
2. Press  
3. Press  
4. Press  
/
/
/
to select ''Picture''.  
to move to ''Sharpness''.  
to adjust the picture sharpness; press OK to return; press TV MENU to exit.  
NOTE: In DVD status, there is no "Sharpness"; there is "Phase".  
In Video and S-Video status, there is “Tint” options under “color”.  
page19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MENU ADJUSTMENT  
AUDIO ADJUSTMENT  
Press TV MENU to bring up the TV menu screen.  
Press  
/
to select ''Audio'' and press to enter into below items.  
36  
38  
39  
37  
Mono  
MPX  
equalizer  
down for audio settings  
Volume  
1. Press TV MENU to bring up the TV menu screen.  
2. Press  
3. Press  
4. Press  
Bass  
/
/
/
to select ''Audio''.  
to move to ''Volume''.  
to adjust the volume; press OK to return; press TV MENU to exit.  
1. Press TV MENU to bring up the TV menu screen.  
2. Press  
3. Press  
4. Press  
exit.  
/
/
/
to select ''Audio''.  
to move to ''Bass''.  
to adjust the bass weaker or stronger; press OK to return; press TV MENU to  
Treble  
To stress high frequency sound  
1. Press TV MENU to bring up the TV menu screen.  
2. Press  
3. Press  
4. Press  
exit.  
/
/
/
to select ''Audio''.  
to move to ''Treble''.  
to adjust the treble weaker or stronger; press OK to return; press TV MENU to  
page20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MENU ADJUSTMENT  
AUDIO ADJUSTMENT (CONTINUED)  
Balance  
1. Press TV MENU to bring up the TV menu screen.  
2. Press  
3. Press  
4. Press  
/
/
/
to select ''Audio''.  
to move to ''Balance''.  
to adjust audio output between left and right speakers; press OK to return; press  
TV MENU to exit.  
MPX  
This function is to select a MPX mode.  
1. Press TV MENU to bring up the TV menu screen.  
2. Press  
3. Press  
4. Press  
/
/
/
to select ''Audio''.  
to move to ''MPX''.  
to select a MPX mode; press OK to return; press TV MENU to exit.  
NOTE: You can also use the MPX button on the remote control to select a MPX mode.  
Equalizer  
1. Press TV MENU to bring up the TV menu screen.  
2. Press  
3. Press  
/
/
to select “Audio”.  
to move to “Equalizer”.  
4. Press to enter “Equalizer” menu.  
5. Press to select every options and press  
6. Press OK to return; press TV MENU to exit.  
/
/
to adjust.  
page21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MENU ADJUSTMENT  
WINDOW ADJUSTMENT  
PC mode input format  
Resolution  
V freq. (Hz)  
H freq. (KHz)  
60  
72  
75  
85  
70  
31.5  
37.9  
37.5  
43.3  
31.5  
640×480  
640×480  
640×480  
640×480  
720×400  
VGA  
60  
75  
85  
72  
60  
70  
75  
37.9  
46.9  
53.7  
48.1  
48.4  
56.5  
60.2  
800×600  
800×600  
800×600  
800×600  
1024×768  
1024×768  
1024×768  
SVGA  
XGA  
In case of inputting the PC signal other than above signals, ''OUT OF RANGE'' will display.  
Setup your PC software  
Even if your actual display-setting screen looks different from the windows below, basic setup  
methods will be applied in most of the case.  
1. First, click on ''Setting'' on the Windows Start menu. While ''Setting'' is selected, move the cursor  
to submenu ''Control Panel''.  
page22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MENU ADJUSTMENT  
WINDOW ADJUSTMENT (CONTINUED)  
2. When the control panel screen appears, click on ''Display'' and a display dialog box displays.  
3. Navigate to the ''Setting'' tab on the display dialog box. The correct setting of size (resolution) is  
''1024 x 768 pixels''.  
Check the vertical frequency of your PC.  
page23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MENU ADJUSTMENT  
WINDOW ADJUSTMENT (CONTINUED)  
Press TV MENU to bring up the TV menu screen.  
Press  
/
to select ''Window'' and press  
to enter into below items.  
H-Position  
1. Press TV MENU to bring up the TV menu screen.  
2. Press  
3. Press  
4. Press  
/
/
/
to select ''Window''.  
to move to ''H-Position''.  
to adjust the horizontal position of displayed image; press OK to return; press  
TV MENU to exit.  
Image Size  
1. Press TV MENU to bring up the TV menu screen.  
2. Press  
3. Press  
4. Press  
/
/
/
to select ''Window''.  
to move to ''Image Size''.  
to select an image size between:Fill All and Force 4:3; press OK to return; press  
TV MENU to exit.  
Close Caption Mode  
1. Press TV MENU to bring up the TV menu screen.  
2. Press  
3. Press  
4. Press  
/
/
/
to select ''Window''.  
to move to ''Close Caption Mode''.  
to select close caption mode; press OK to return; press TV MENU to exit.  
NOTE: You can also use the CAPTION button on the remote control to select close caption  
mode.  
Close Caption  
1. Press TV MENU to bring up the TV menu screen.  
2. Press  
3. Press  
4. Press  
/
/
/
to select ''Window''.  
to move to ''Close Caption''.  
to control close caption; press OK to return; press TV MENU to exit.  
NOTE: In DVD, PC and COMPONENT Status, there are only “Image size” and “H position”  
options.  
page24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MENU ADJUSTMENT  
OPTIONS ADJUSTMENT  
Press TV MENU to bring up the TV menu screen.  
Press  
/
to select ''Options'' and press to enter into below items.  
osd timeout  
sleep time  
time remaining  
nvram  
never  
0 minutes  
- 123 minutes -  
Menu Background  
1. Press TV MENU to bring up the TV menu screen.  
2. Press  
3. Press  
4. Press  
/
/
/
to select ''Options''.  
to move to ''Menu Background''.  
to select the menu background between:Translucent and Opaque; press OK to  
return; press TV MENU to exit.  
page25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MENU ADJUSTMENT  
OPTIONS ADJUSTMENT (CONTINUED)  
OSD Timeout  
1. Press TV MENU to bring up the TV menu screen.  
2. Press  
3. Press  
4. Press  
/
/
/
to select ''Options''.  
to move to ''OSD Timeout''.  
to set “OSD Timeout”; press OK to return; press TV MENU to exit.  
Sleep Time  
1. Press TV MENU to bring up the TV menu screen.  
2. Press  
3. Press  
4. Press  
/
/
/
to select ''Options''.  
to move to ''Sleep Time''.  
to set “Sleep Time”; press OK to return; press TV MENU to exit.  
Reset Nvram  
1. Press TV MENU to bring up the TV menu screen.  
2. Press  
3. Press  
/
/
to select ''Options''.  
to move to ''Reset Nvram''.  
4. Press to reset all settings to factory setting.  
NOTE: In PC status,there is "Back Light" option under "Menu Background".The operation is all  
the same as "Menu Background".  
page26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
Please check the following items before asking for repair service.  
Symptom  
Neither picture nor  
sound.  
Check Items  
- Check the contact of sockets is all right.  
- Check the TV main power is on.  
Picture is OK, but no  
sound.  
- Check the volume control is set to minimum or mute.  
- Check the color control and adjust it properly.  
Sound is OK, but no  
color.  
- Check the programme is in color or in black & white.  
-Check the antenna is installed correctly and if not, adjust the antenna  
toward the broadcasting station.  
The picture is  
overlapped image.  
-Check the ''FINE TUNE ''is set up correctly and if not, adjust the fine  
tuning properly.  
- Check the antenna or its connection is correct and if not, correct the  
antenna fault or connection cable fault.  
Picture has ''snow  
noise ''.  
- Check if car traffic or neon sign disturbs the sound effect.  
- Check the susceptible interference by other electronic devices such  
as radio and television and keep magnetic or electronic devices away  
from the TV.  
Stripes on picture.  
Bad stereo or SAP  
sound.  
- Long distance from the station or other radio waves can generate bad  
sound. Reception. If so, change the mode to Mono.  
- Check if the batteries in the Remote control die.  
Remote control does  
not work.  
- Check if any object between IR sensor of the TV and the Remote  
control does not obstruct.  
- Check the resolution and frequency of your PC. Then, adjust them to  
optimum condition for LCD TV: 1024X768 and 60Hz.  
''Out Of Range''  
appears on the  
screen.  
- Refer to the table of PC mode input format indicated on page 22. (Not  
being registered resolution and frequency on the table won't be displayed.)  
''No Signal'' appears  
on the screen.  
-Ensure that the signal cable is firmly connected to PC and TV.  
-Adjust the PHASE control. (Refer to the PICTURE ADJUSTMENT.)  
Image is not clear.  
Image is not  
centered.  
- Adjust the H-POSITION, and IMAGE SIZE Control. (Refer to  
the WINDOW ADJUSTMENT.)  
page27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
PANEL  
17'' WIDE TFT LCD  
1280 X RGB X 768 (WXGA)  
370 X 222  
RESOLUTION  
LCD  
ACTIVE AREA (mm)  
VIEWING ANGLE (°,U/D/L/R)  
CONTRAST RATIO  
45/45/60/60  
400:1  
BRIGHTNESS (cd/m2)  
WITH STAND (mm)  
450  
500 X 352 X 220  
500 X 292 X 83  
13.7lbs (6.6kg)  
NTSC  
DIMENSION  
WITHOUT STAND (mm)  
WEIGHT (WITHOUT ACCESSORIES)  
TV STANDARD  
TUNING SYSTEM  
ELECTRIC TUNING SYSTEM  
VHF/UHF  
TV-FUNCTION  
FREQUENCY RANGE  
STEREO  
MTS + SAP  
CATV  
125 CHANNELS  
DC12V, AC100-240V~, 50/60Hz  
4W + 4W  
INPUT POWER  
SOUND OUTPUT  
POWER CONSUMPTION  
AV IN  
45W  
VIDEO, S-VIDEO, AUDIO L&R  
Y, Pb (Cb), Pr (Cr)  
VIDEO OUT  
COMPONENT  
MONITOR OUT  
TERMINALS  
HEADPHONE  
PC IN  
3.5mm STEREO MINI-JACK  
D-SUB 15PIN RGB IN  
F-TYPE  
ANTENNA IN  
page28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATIONS (FOR DVD PLAYER)  
DVD  
CD  
DVD  
CD  
Pause  
Play Discs  
Press  
1. Press POWER to turn on the unit.  
TV/DVD  
TV MENU  
/AUX/PC  
2. Press the TV/DVD/AUX/PC button on the  
OK  
DVD TITLE  
DVD MENU  
PLAY  
PAUSE  
STOP  
remote control to bring up the AV signal  
source selection screen and use the  
SKIP  
SEARCH  
PAUSE  
/
ZOOM  
SLOW  
SETUP  
REPEAT  
SUBTITLE  
RETURN  
WIDE  
P. MODE  
A. MODE  
REMAIN  
AUDIO  
buttons to select "DVD", press the OK  
button to confirm.  
ANGLE  
RC-173DT  
3. Insert a disc into the disc slot, with the  
label side facing to yourself.  
4. The unit begins to read the disc.  
DVD  
5. Press (PLAY) to play the disc.  
To pause playback of a DVD while it is playing,  
press .The unit enters step play status. Each  
AFTER STEP 4 IS FINISHED:  
time you press  
, the picture advances one frame.  
If playing a DVD, the TV screen shows DVD menu or  
title menu.  
CD  
If playing a CD, press (PLAY), and the unit plays  
the disc according to the track numbers.  
5. Stop playback.  
Press  
to make playback pause.  
Press (PLAY)to resume playback.  
Press .  
DVD  
CD  
OSD  
OSD  
POWER  
MPX  
OSD  
OPEN  
1
5
9
2
6
3
7
4
8
AUTO/USB/CARD  
10/0  
+10  
CAPTION  
6. Press the button on the remote control to remove the  
disc and turn off the unit.  
MUTE  
LAST  
VOL  
CH  
TV/DVD  
/AUX/PC  
TV MENU  
You have to push "" button twice to stop playback  
of a DVD disc.  
The On-Screen Display (OSD) contains many playback  
features.To see the Display, press the OSD button on  
the remote while a disc is playing. The Display appears  
across the top of the screen.Each feature is illustrated with  
an icon. Use the or buttons on the remote to move  
through the different icons in the Display.  
When an icon is highlighted, use the or butons on the  
remote to scroll through the choices displayed in the text  
box under the icons.  
page29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATIONS (FOR DVD PLAYER)  
Remember, you can only access the Display when you're  
playing a disc. Also, the Display features are only  
available if the disc was created with that particular  
feature (i.e., if you select the Subtitle icon, you won't be  
able to change the subtitle language unless the author of  
the disc created the disc with subtitles).  
2. Press the or buttons to highlight the Chapter icon.  
3. Press the or buttons to go to the previous or next  
chapter.  
Notes: The chapter feature won't work if the disc isn't  
formatted with separate chapters.  
You can also advance to the next chapter by pressing  
on the remote and go to the preceding chapter by  
The invalid symbol " " appears on the screen when you  
press a button that doesn't have any function. If one of  
the icons is "grayed out ",that Display feature isn't  
available for the disc you're playing. To make the Display  
disappear from the screen, press OSD on the remote.  
pressing  
on the remote.  
Changing the Audio Language  
If the disc was created with different language tracks  
(recorded in different languages), you can use the Display  
to temporarily change the DVD player's Audio Language  
setting.  
DVD  
1. While the disc is playing, press OSD on the remote  
to bring up the Display.  
DVD discs have the following playback features:Title,  
Chapter, Audio, Subtitle, Angle and Repeat.  
Select a Title  
2. Press the or buttons to highlight the Audio icon.  
The current audio language appears in the text box  
below the row of icons.  
Some discs contain more than one title. For example,  
there might be four movies on one disc (each movie might  
be considered a title).  
3. Press the or buttons to scroll through the audio  
languages that are available on the disc until the audio  
language you want to use appears in the text box.  
Audio will be played in that language.  
Each title is divided into chapters. To select a title:  
1. While the disc is playing, press OSD on the remote  
to bring up the Display.  
4. To make the Display disappear, press the OSD button  
on the remote.  
2. If the Title icon on the Display isn't highlighted, use the  
or buttons to highlight it.  
Note: The language feature only works if the disc was  
created with multiple audio tracks. When you choose an  
audio language from the Display, you only override the  
audio language setting in the DVD player's main menu  
temporarily.  
3. Press the or buttons to go to the previous or next  
title.  
Note: Some discs only have one title.  
Select a Chapter  
The audio language can also the changed through the  
DVD player menu.  
Because DVD discs use digital technology, a title can be  
divided into individual chapters (similar to tracks on a CD).  
You can skip to a specific chapter by using the Chapter  
feature in the Display.  
Selecting the Subtitle Language  
If the disc was created with subtitles, you can use the  
Display to change the Subtitle language.  
1. While the disc is playing, press OSD on the remote  
to bring up the Display.  
page30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATIONS (FOR DVD PLAYER)  
All - repeats the disc that is playing  
1. When the disc is playing, press OSD on the remote  
to bring up the Display.  
Title - repeats the title that is playing  
Chapter - repeats the chapter that is playing  
2. Press the or buttons to highlight the Subtitle icon.  
3. Press the or buttons to scroll through the subtitle  
languages that are available on the disc until the  
subtitle language you want to use appears in the text  
box. The subtitles will be shown in that language.  
4. To make the Display disappear, press the OSD button  
on the remote.  
To Use Repeat:  
1. While a disc is playing, press OSD on the remote to  
bring up the Display.  
2. Highlight the Repeat icon.  
3. Press the or buttons to scroll through the Repeat  
options until the Repeat option you want is displayed in  
the text box.  
4. The selected repeat option will loop repeatedly until  
you turn Repeat off.  
Notes: Changing the subtitle language with the Display  
will only affect the disc currently being played. When the  
disc is removed or the player is turned off, the subtitle  
language will revert to the language setting specified  
through the DVD player main menu.  
How to Cancel Repeat:  
There are three ways to cancel Repeat:  
Press STOP twice.  
Go to Repeat icon in the Display and select Off.  
The subtitle language can also be changed through the  
DVD player menu.  
Eject the disc.  
CD  
LAYING CD  
Changing the Camera Angle  
CD discs have the following playback features: Track,  
L/R, and Repeat.  
Some discs contain multiple angles of a particular scene  
or sequence. If the disc only has one angle, this feature  
won't work. When multiple angles are available, to  
change the camera angle:  
Select a Specific Track  
1. While the disc is playing, press OSD on the remote  
to bring up the Display.  
1. When a disc is playing, press OSD on the remote to  
bring up the Display.  
2. Highlight the Track icon.  
3. Press the or buttons to scroll through the track  
numbers.  
2. The Angle icon will display the number of angles  
available. For example, if there are 3 different angles,  
the icon will read 1 of 3, This means angle 1 is  
currently being played.  
Changing the Audio Channel Output  
If you are playing a Stereo CD, you can change the  
channel output from the player.  
1. Press OSD on the remote to bring up the Display.  
2. Highlight the L/R icon on the Display.  
3. The audio channel choices appear in the text box.  
Press the or buttons to scroll through the choices:  
LEFT MONO, RIGHT MONO, MIXED MONO or  
STEREO. Whatever choice is displayed becomes the  
active choice.  
3. Press the or buttons to scroll through the angle  
choices. The angle number displayed in the text  
window is automatically shown.  
4. To make the Display disappear, press the OSD button  
on the remote.  
Using the Repeat Feature  
Using the Repeat Feature  
The default mode for the Repeat feature is off. There are  
three Repeat options:  
The default mode for the Repeat feature is off. There are  
two Repeat options for CDs:  
All - repeats the disc that is playing  
Track - repeats the track that is playing  
page31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATIONS (FOR DVD PLAYER)  
DVD  
To Use Repeat:  
DVD Menu Play  
1. While a disc is playing, press OSD on the remote  
to bring up the Display.  
2. Highlight the Repeat icon.  
Some DVDs have title menus and chapter menus.  
Press (PLAY), the screen shows the menu.  
3. Press the or buttons to scroll through the  
Repeat options until the Repeat option you want is  
displayed in the text box.  
Press  
or  
to skip to the next or previous page.  
Select with number buttons or direction buttons.  
4. The selected repeat option will loop repeatedly until  
you turn Repeat off.  
1.  
Root  
Menu  
2.  
Volume Control  
11.  
DVD  
CD  
Example: select track 13.  
Press VOLUME on the TV or amplifier to adjust the  
volume.  
1. Press  
to enter the next menu.  
Press VOLUME on the remote control.  
12.  
Root  
Menu  
13.  
POWER  
MPX  
OSD  
OPEN  
14.  
15.  
1
5
9
2
6
3
7
4
8
AUTO/USB/CARD  
10/0  
+10  
CAPTION  
MUTE  
LAST  
2. Press number buttons to select directly.  
VOL  
CH  
VOLUME+,-  
TV/DVD  
/AUX/PC  
TV MENU  
OK  
+
3
+10  
1. Press + to raise the volume.  
You can also select as follows:  
1. Press to select track 13.  
POWER  
MPX  
OSD  
OPEN  
1
5
9
2
6
3
7
4
8
AUTO/USB/CARD  
2. Press - to lower the volume.  
10/0  
+10  
CAPTION  
12.  
13.  
14.  
15.  
MUTE  
LAST  
VOL  
CH  
Root  
Menu  
TV/DVD  
/AUX/PC  
TV MENU  
OK  
DVD TITLE  
DVD MENU  
STOP  
PLA  
Y
PAUSE  
SKIP  
SEARCH  
ZOOM  
SLOW  
SETUP  
REPEAT  
SUBTITLE  
RETURN  
WIDE  
P.  
MODE  
REMAIN  
AUDIO  
A. MODE  
ANGLE  
RC-173DT  
2. Press (PLAY) to start playing track 13.  
Press DVD TITLE once to return to the title menu.  
Press DVD MENU once to return to the root menu.  
page32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BASIC OPERATIONS  
PLAY DISCS IN VARIOUS WAYS  
Select with Number  
DVD  
CD  
Audio Mode  
Buttons  
CD  
You may select a language from a multi-language DVD.  
You may select the right channel, left channel, or stereo  
options from a multi-channel CD.  
Load a disc. Press number buttons to select tracks after  
the unit finishes reading the disc.  
TV/DVD  
/AUX/PC  
TV MENU  
OK  
DVD TITLE  
DVD MENU  
PLAY  
PAUSE  
STOP  
SKIP  
SEARCH  
1. If the track number isn't over 10, just  
push buttons 1-10.  
ZOOM  
SLOW  
SETUP  
REPEAT  
SUBTITLE  
RETURN  
WIDE  
P. MODE  
A. MODE  
REMAIN  
AUDIO  
ANGLE  
A.MODE  
AUDIO  
Example: push 8 to select track 8.  
RC-173DT  
DVD  
8
To select a language, press AUDIO .  
The screen will show the following in order:  
AUDIO 1/2:AC-3 5.1CH  
The screen shows:  
TRACK08/20 00:00  
AUDIO 2/2:AC-3 5.1CH  
2. If the track number is over 10, press + 10 once and a  
button between 1-10.  
Different discs may differ in languages available.  
Example: if you select track 12, press +10 once and  
button 2 .  
To select audio channel option, press A.MODE ,  
the screen shows the following in order:  
A.MODE  
MONO LEFT  
+
2
+10  
A.MODE  
MONO RIGHT  
The screen shows:  
A.MODE  
MIXED MONO  
TRACK12/20 00:00  
A.MODE  
STEREO  
page33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAY DISCS IN VARIOUS WAYS  
CD  
Fast Play  
DVD  
CD  
To select audio channel option when for CD playback,  
press A.MODE . The screen will show the following in  
order:  
When playing a disc, you can play it in fast-forward or  
fast-reverse mode to find what you want to view.  
A.MODE  
MONO LEFT  
DVD OR CD  
1. While disc is playing, press  
to play in fast-forward  
A.MODE  
mode. Each time you press the button, the screen shows  
the following in order:  
MONO RIGHT  
2X  
4X  
8X  
16X  
32X  
A.MODE  
FF  
MIXED MONO  
A.MODE  
STEREO  
2. While disc is playing, press  
to play in fast-reverse  
mode. Each time you press the button, the screen shows  
the following in order:  
You may select one mode.  
Notes:  
Different discs differ in languages available.  
2X  
4X  
8X  
16X  
32X  
FR  
DVD  
CD  
Mute  
When playing a disc, this function removes the sound.  
1. TO REMOVE SOUND  
3. Press  
(PLAY) to switch to normal play while in fast-  
Press MUTE , the screen shows "  
MUTE  
".  
forward or fast-reverse playing mode.  
2. TO RESUME SOUND  
Press MUTE again, to resume sound.  
page34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAY DISCS IN VARIOUS WAYS  
DVD  
Playing A Disc Repeatedly  
Slow Play  
Enjoy slow motion by the following the steps below.  
PLAY  
PAUSE  
STOP  
DVD  
SKIP  
SEARCH  
ZOOM  
P. MODE  
A. MODE  
SLOW  
SETUP  
REPEAT  
SUBTITLE  
RETURN  
WIDE  
REMAIN  
AUDIO  
You can repeat a title or chapter.  
1. To repeat a chapter:  
SLOW  
ANGLE  
RC-173DT  
Press REPEAT , the screen will show:  
DVD  
REPEAT  
1. Press SLOW to play in slow motion.  
SLOW  
CHAPTER  
2. To repeat a title:  
Press REPEAT twice, the screen will show:  
The screen shows the following in order:  
REPEAT  
1/2  
1/4  
1/8  
1/4  
1/16  
1/2  
TITLE  
1/16  
1/8  
2. Press (PLAY) to resume play at normal speed.  
3. To repeat all:  
Press REPEAT third time, the screen shows  
"
ALL".  
DVD  
CD  
Repeat Play  
4. To remove "REPEAT" function:  
Press REPEAT until "  
ALL" disappears.  
This function can be used to repeatedly play a title,  
chapter, track, or a whole disc.  
CD  
You may repeat a track or an entire disc according to  
the following steps.  
LAST  
1. To repeat a track:  
TV/DVD  
/AUX/PC  
TV MENU  
OK  
DVD TITLE  
DVD MENU  
Press REPEAT , the screen shows "  
The unit plays the current track.  
TRACK".  
PLAY  
PAUSE  
STOP  
SKIP  
SEARCH  
ZOOM  
SLOW  
SETUP  
REPEAT  
SUBTITLE  
RETURN  
WIDE  
P. MODE  
A. MODE  
REMAIN  
AUDIO  
ANGLE  
REPEAT  
RC-173DT  
page35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAY DISCS IN VARIOUS WAYS  
REPEAT  
Select Subtitles  
TRACK  
DVD  
This operation works only with discs with multiple subtitle  
languages recorded.  
2. To repeat a disc:  
Press REPEAT , the screen shows "  
The unit plays all the tracks on the disc.  
REPEAT  
ALL".  
LAST  
TV/DVD  
TV MENU  
/AUX/PC  
OK  
ALL  
DVD TITLE  
DVD MENU  
PLAY  
PAUSE  
STOP  
SKIP  
SEARCH  
ZOOM  
SLOW  
SETUP  
REPEAT  
SUBTITLE  
RETURN  
WIDE  
P. MODE  
A. MODE  
REMAIN  
AUDIO  
ANGLE  
3. To remove "REPEAT" function:  
SUBTITLE  
Press REPEAT till "  
ALL" disappears.  
RC-173DT  
DVD  
Zoom Play  
This function can be used to watch a motion or  
motionless picture.  
DVD  
PLAY  
PAUSE  
STOP  
SKIP  
SEARCH  
ZOOM  
P. MODE  
A. MODE  
SLOW  
SETUP  
REPEAT  
SUBTITLE  
RETURN  
WIDE  
1. Press SUBTITLE repeatedly until the desired  
language is selected.  
ZOOM  
REMAIN  
AUDIO  
ANGLE  
The screen shows:  
RC-173DT  
1. Press ZOOM during playback,  
the screen shows:  
SUBTITLE  
2X  
SUBTITLE01/03:ENGLISH  
The picture is enlarged twice the size.  
2. Press ZOOM again, the screen shows:  
2. Remove the subtitle.  
Press SUBTITLE until the screen shows "TURN  
OFF SUBTITLE".  
3X  
Notes:  
The picture is enlarged three times the size.  
Note: The unit has six zoom levels:  
For some discs, subtitles cannot be removed.  
Different discs differ in the language of subtitles.  
2X,  
3X, 4X, 1/2 ,  
1/3 , and  
If the subtitles of discs cannot be selected, the  
1/4 .  
screen shows "  
" when you press SUBTITLE .  
3. Press  
,
,
,
to move the enlarged picture.  
4. To resume the picture, press ZOOM until the  
picture is in normal size.  
page36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAY DISCS IN VARIOUS WAYS  
DVD  
CD  
Angles Select  
Program Play  
OK  
DVD  
DVD TITLE  
DVD MENU  
PLAY  
PAUSE  
STOP  
SKIP  
SEARCH  
ZOOM  
SLOW  
SETUP  
REPEAT  
SUBTITLE  
RETURN  
WIDE  
Some discs have images with different viewing angles,  
you may select among them. For example, when you  
watch a running train, you may watch it from the front, the  
left window or the right window without stopping it.  
P. MODE  
A. MODE  
REMAIN  
AUDIO  
ANGLE  
P.MODE  
RC-173DT  
To use the program playback feature, you must enter  
the order in which you want the titles (and chapters) on  
the DVD or the tracks on the CD to play by creating a  
program.  
LAST  
TV/DVD  
TV MENU  
/AUX/PC  
OK  
DVD TITLE  
DVD MENU  
PLAY  
PAUSE  
STOP  
SKIP  
SEARCH  
DVD  
ZOOM  
SLOW  
SETUP  
REPEAT  
SUBTITLE  
RETURN  
WIDE  
P. MODE  
A. MODE  
REMAIN  
AUDIO  
1. Press P.MODE until the screen shows:  
ANGLE  
ANGLE  
PROGRAM: TT(20)/CH (  
--)  
RC-173DT  
01 TT:_ _ CH:_ _ 06 TT:_ _ CH:_ _  
02 TT:_ _ CH:_ _ 07 TT:_ _ CH:_ _  
03 TT:_ _ CH:_ _ 08 TT:_ _ CH:_ _  
04 TT:_ _ CH:_ _ 09 TT:_ _ CH:_ _  
05 TT:_ _ CH:_ _ 10 TT:_ _ CH:_ _  
Example:  
A DVD has four viewing angles at your option.  
1. Press ANGLE to select ANGLE1.  
EXIT  
NEXT  
2. Use the number buttons on the remote to enter the title  
(and chapter) you want to play first. The title (and  
chapter) number you entered appears in the box. For  
example: Enter Chapter 1 in Title 8, the screen shows:  
1/4  
PROGRAM: TT(20)/CH (  
--)  
01 TT:0 8 CH:0 1 06 TT:_ _ CH:_ _  
02 TT:_ _ CH:_ _ 07 TT:_ _ CH:_ _  
03 TT:_ _ CH:_ _ 08 TT:_ _ CH:_ _  
04 TT:_ _ CH:_ _ 09 TT:_ _ CH:_ _  
05 TT:_ _ CH:_ _ 10 TT:_ _ CH:_ _  
EXIT  
START  
NEXT  
2. Press ANGLE to select other angles, the  
screen shows respectively:  
3. The cursor jumps to the next spot in the program list  
section. Make sure the box is highlighted and enter  
your next track.  
4.Continue adding title (and chapter) until your program  
is complete. You can play your program by highlighting  
START and press PLAY .  
2/4 (select ANGLE2)  
3/4 (select ANGLE3)  
4/4 (select ANGLE4)  
Note: If you want to program more than 10 titles (and  
chapters), highlight NEXT and press PLAY to  
go to the next page. Proceed to program 11-20 in  
the same way titles 1-10 were programmed.  
5. To remove program playback, press the STOP button  
twice during the program play.  
3. To resume normal playback, press ANGLE to select  
original angle.  
page37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAY DISCS IN VARIOUS WAYS  
CD  
Shuffle (Random) Play  
1. Press P.MODE until the screen shows:  
DVD  
CD  
PROGRAM: TRACK (01-20)  
The unit can play DVD chapters or audio tracks in  
random order.  
01 _ _  
02 _ _  
03 _ _  
04 _ _  
05 _ _  
06 _ _  
07 _ _  
08 _ _  
09 _ _  
10 _ _  
The order is different each time.  
1. Press P.MODE to select shuffle or random play  
mode when a disc is playing.  
EXIT  
NEXT  
2. Use the number buttons on the remote to enter the  
track number you want to play first. The track number  
entered appears in the box. The example: To program  
track 8 of a CD to play first, enter 8, and the screen  
shows:  
P.MODE  
The screen shows:  
PROGRAM: TRACK (01-20)  
01 08  
02 _ _  
03 _ _  
04 _ _  
05 _ _  
06 _ _  
07 _ _  
08 _ _  
09 _ _  
10 _ _  
SHUFFLE  
OR  
RANDOM  
EXIT  
START  
NEXT  
2. Shuffle or random play will begin.  
3. The cursor jumps to the next spot in the program list  
section. Make sure the box is highlighted and enter  
your next track.  
3. Remove shuffle or random play.  
When playing a DVD disc, press twice.  
When playing a CD disc, press twice.  
4. Continue adding tracks until your program is  
complete. You can play your program by highlighting  
START and press PLAY .  
Note: If you want to program more than 10 tracks,  
highlight NEXT and press PLAY to go to next  
page. Program 11-20 in the same way 1-10 were  
programmed.  
5. To remove program playback, press the STOP button  
during the program play.  
page38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MENU SETTING  
According to the recorded information and external  
equipment, set the following functions for the player to  
The screen shows:  
obtain the best playing status.  
LAST  
-- Audio Setup Page --  
TV/DVD  
/AUX/PC  
TV MENU  
OK  
DVD TITLE  
DVD MENU  
Speaker Setup  
Dolby Digital Setup  
Channel Equalizer  
3D Processing  
PLAY  
PAUSE  
STOP  
SKIP  
SEARCH  
ZOOM  
SLOW  
SETUP  
REPEAT  
SUBTITLE  
RETURN  
WIDE  
P. MODE  
A. MODE  
REMAIN  
AUDIO  
SETUP  
ANGLE  
Main Page  
RC-173DT  
Go To Speaker Setup Page  
1.Press SETUP to set options in the main menu.  
SETUP  
Press direction buttons ( or ) to highlight "Dolby  
Digital Setup", and press (PLAY) to enter "Dolby  
Digital Setup" Page. The screen shows the submenu  
for your selection.  
The screen shows:  
The main menu appears on the screen, with icons across  
the top of the screen, illustrating General Setup, Audio  
Setup, Video Setup,Preference, Password Setup, and  
Exit Setup.  
--Dolby Digital Setup--  
Dual Mono STR  
Stereo  
The screen shows:  
Left Mono  
Right Mono  
Mixed Mono  
D.R.C  
--Setup Menu--Main page --  
General Setup  
Audio Setup  
Audio Setup  
Press direction buttons  
The screen shows:  
,
to select "Left Mono".  
Video Setup  
Preferences  
Password Setup  
Exit Setup  
Go To General Setup Page  
--Dolby Digital Setup--  
Dual Mono STR  
Stereo  
2. Press direction buttons ( or ) to select and press  
(PLAY) to confirm.  
Left Mono  
Right Mono  
Mixed Mono  
Example: Select "Audio Setup" and do some setup.  
Press direction button to highlight "Audio Setup",  
D.R.C  
press (PLAY) to enter "Audio Setup Page".  
Audio Setup  
page39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MENU SETTING  
Press  
(PLAY) to confirm your selection. Set "Dual  
-- General Setup Page --  
Mono" in "Dolby Digital Setup" to "Left Mono".  
TV Display  
Wide  
Normal/PS  
Normal/LB  
Wide  
On  
The sereen shows:  
Captions  
On  
Off  
Screen Save On  
Last Memory On  
Main Page  
On  
Off  
On  
Off  
--Dolby Digital Setup--  
Dual Mono  
L
Stereo  
Left Mono  
Right Mono  
Mixed Mono  
TV DISPLAY  
D.R.C  
1. NORMAL/PS  
Audio Setup  
This is selected when the unit is connected  
to a normal TV.  
Wide-screen images are shown on the screen, but  
with some parts cut automatically.  
3. Exit setup menu.  
Press the direction button to exit from "Dual  
Mono".  
Press the direction button to exit from "Dolby  
Digital Setup".  
Press the direction button to highlight "Main Page"  
and press (PLAY). The screen shows:  
2. NORMAL/LB  
This is selected when the unit is connected  
to a normal TV. Wide-screen images are  
shown on the screen with black bars on the  
top and bottom of the screen.  
Setup Page -- Main Page  
General Setup  
Audio Setup  
Video Setup  
Preferences  
Password Setup  
Exit Setup  
Go To Audio setup Page  
3. WIDE  
This is selected when the unit is connected to a  
wide-screen TV.  
Press the direction button to highlight "Exit Setup"  
and press (PLAY) to exit setup menu completely.  
NOTE:You can also keep pressing the direction button  
until the cursor is moved to the last icon illustrating  
Exit, then press the (PLAY) button to exit setup  
menu completely.  
General Setup  
NOTE: You can use the WIDE button on the remote  
control to set TV display mode.  
The setting structure is :  
page40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MENU SETTING  
Lt/Rt  
CAPTIONS  
A disc recorded multi channel soundtrack, the output  
signal will be incorported to left and right channel.  
STEREO  
A disc recorded multi channel soundtrack, the output  
signal will be incorported to stereo.  
ON  
Subtitles are shown.  
OFF  
Subtitles are hidden.  
SCREEN SAVER  
DOLBY DIGITAL SETUP  
The screen saver image appears when the unit stops or  
the image is frozen for a few minutes. The screen saver  
prevents damage to the TV screen.  
The setting structure is:  
- - Dolby Digital Setup - -  
ON: Start the screen saver.  
Dual Mono  
STR  
Stereo  
OFF: Remove the screen saver.  
Left Mono  
Right Mono  
Mixed Mono  
LAST MEMORY  
The unit can memory the point of a disc where the  
power is off and play from the point when you turn on  
the unit again.  
FULL  
3/4  
2/4  
D.R.C  
1/4  
OFF  
Audio Setup  
ON: This function is on and works.  
OFF: This function is off and does not work.  
DUAL MONO  
This is the output mode of the L and R signals of the  
set audio output. If it is set to "MIXED MONO", the  
function only works when the DVD being played is 5.1-  
channel.  
Audio Setup  
The setting structure is:  
D.R.C  
This is selected to adjust linear compression rate to  
obtain the different compression results of the signals.  
- - Audio Setup Page - -  
Speaker Setup  
EQUALIZER  
Dolby Digital Setup  
Channel Equalizer  
3D Processing  
This will help you to select graphic equalizer patterns  
according to the genre of the music being played,and  
adjust the equalizer.  
Main Page  
The setting structure is:  
SPEAKER SETUP  
- - Channel Equalizer - -  
EQ Type  
None  
None  
Rock  
Pop  
The setting structure is:  
Live  
- - Speaker Setup Page - -  
Dance  
Techno  
Classic  
Soft  
Downmix  
STR  
Lt/Rt  
Stereo  
Audio Setup  
Audio Setup  
EQ TYPE  
You can select music category by pressing the direction  
buttons and confirm by pressing the PLAY button.  
page41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MENU SETTING  
MEDIUM  
3D PROCESSING  
The sharpness level is medium.  
LOW  
The setting structure is:  
The sharpness level is lowest.  
- - 3D Processing Page - -  
BRIGHTNESS  
V SURR  
Off  
On  
Off  
You can use the or button to adjust the brightness.  
CONTRAST  
Reverb Mode Off  
Off  
Concert  
You can use the or button to adjust the contrast.  
Living Room  
Hall  
Bathroom  
Cave  
Password Setup  
The setting structure is :  
Arena  
Church  
Audio Setup  
- - Password Setup Page - -  
V SURR  
PW Mode  
Off  
On  
Off  
Use to turn the above function off.  
REVERB MODE  
Password  
Main Page  
Change  
Use to select a Reverb Mode which you want.  
PASSWORD MODE  
ON: The password function is on and "PARENTAL"  
is dim and cannot be selected.  
Video Setup  
The setting structure is:  
OFF: The password is locked, "PARENTAL" can  
be selected.  
- - Video Setup Page - -  
PASSWORD CHANGE  
Sharpness  
High  
High  
Select this to adapt the code, the screen shows:  
Medium  
Low  
Brightness  
Contrast  
Main Page  
00  
00  
Old Password  
New Password  
Confirm PWD  
OK  
SHARPNESS  
Enter a password according to the screen.  
Note: The password is automatically factory set to  
99999.  
Use to select the sharpness level.  
HIGH  
The sharpness level is highest.  
page42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MENU SETTING  
MP3 OPERATIONS  
SELECT TRACKS WITH  
Preferences  
NUMBER BUTTONS  
The setting structure is :  
1. Insert a disc, the unit will search disc information.  
The TV screen displays main menu.  
- - Preference Page - -  
Audio  
ENG  
English  
French  
00:00  
00:00  
Spanish  
Chinese  
Japanese  
001/012 FOLDER  
\
Subtitle ENG English  
CD01  
CD02  
CD03  
CD04  
CD05  
CD06  
French  
Spanish  
Chinese  
Japanese  
Off  
Disc Menu  
Parental  
ENG  
English  
French  
Spanish  
Chinese  
Japanese  
2.Press direction key to select song folder.  
Press (PLAY) to confirm selection. Example:  
Select MP3-02, the TV screen displays.  
08  
1 G  
2
00:00  
00:00  
3 PG  
001/016 FOLDER  
4 PG 13  
5 PGR  
6 R  
\CD02\  
..  
7 NC17  
8 ADULT  
wave-11  
wave-12  
wave-13  
wave-14  
wave-15  
Default  
Reset  
Main Page  
3. Press direction buttons to select a song. Press  
(PLAY) button to start playback.  
4. Press or button to select other tracks in stop  
mode.  
5. In stop mode, select the folder icon (UP DIR 1) on  
the left side, then press (PLAY) button to return to  
the main menu.  
LANGUAGE SELECTION  
If a language mentioned above is recorded on the disc,  
you can select sound, subtitles or disc menu languages. If  
not, the language recorded on the disc is shown.  
PARENTAL LOCK  
When playing a disc with parental lock function, you may  
select an age control grade according to the rating your  
desire.  
6. Press  
or  
to play previous or next songs.  
Example: If "PG" is selected, you cannot play DVD video  
discs rated higher than the PG grade.  
DEFAULT >> RESET  
Each function setting returns to the initial status in the  
factory if you select this option.  
OTHER FUNCTIONS  
During playback of MP3 discs, the unit features mute,  
volume control, and repeat play. Operations are the  
same as CD.  
Note:  
"PREFERENCES" can only be selected when password  
is OFF when the unit is in stop mode.  
page43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KODAK PICTURE CD PLAYBACK  
A Kodak Picture CD has the size and shape of a regular CD. You can order a KODAK Picture CD simply by  
checking the box on the photofinishing envelope when you drop off a roll of film (35 mm or Advanced Photo  
System (APS) color print film) at the time of processing in photo processing outlet displaying "Kodak Picture  
CD"sign. When your order is returned, you receive your prints, negatives, and your full roll of pictures safely  
stored on your KODAK Picture CD. Each KODAK Picture CD brings you the tools to enhance, share and  
manage your pictures on your computer.  
Now, you can playback Kodak Picture CDs on XXX DVD players and view your pictures on your TV in the  
comfort of your living room.  
Playing back your Kodak Picture CD  
The new feature enables the decoding of JPEG files from a Kodak Picture CD disk.  
Playback modes  
Normal  
When a Kodak Picture CD is inserted on a player an automatic slide show is launched. Each picture in the Kodak  
Picture CD will be displayed consecutively in a slide-show fashion and will be scaled to fit in the TV screen. Twelve  
slideshow transition modes are provided, use "PLAY MODE" key to select.Select transition mode prior to start of  
slideshow if one mode is desired for the entire show.  
Mode 8: wipe from right bottom to left top  
Mode 9: wipe from center to top/bottom  
Mode 10: wipe from center to left/right  
Mode 11: wipe from top/bottom to center  
Mode 12: wipe from left/right to center  
Mode 13: horizontal blinds  
Mode 14: vertical blind  
Mode 15: wipe from edge to center  
Mode 16: random  
Mode 0: no special transition effect (by default)  
Mode 1: wipe from top to bottom  
Mode 2: wipe from bottom to top  
Mode 3: wipe from left to right  
Mode 4: wipe from right to left  
Mode 5: wipe from left top to right bottom  
Mode 6: wipe from right top to left bottom  
Mode 7: wipe from left bottom to right top  
Customer can set transition effects for each picture in a slideshow by using the "PLAY MODE" functions while  
viewing a slideshow.The last transition mode selected will be used in any future slideshows.  
To display an image indefinitely, press the PAUSE key. To view the Next or Previous picture press NEXT or  
PREVIOUS keys. To resume the slideshow press the PLAY key.  
Image Rotation  
There are four modes to rotate a picture:"Invert", "Mirror", "Left", and "Right". These operations are allowed only  
when a picture is being displayed normally and will be cancelled automatically when a new picture is displayed.The  
arrow key is used to select the diferent rotation modes:  
Up  
-Invert/Normal  
-Mirror/Normal  
-Turn left  
Down  
Left  
Right  
-Turn right  
Zoom  
We provide both ZOOM in/out and Zoom pan function for the pictures. The "ZOOM" key is used to turn on or off this  
function. When this mode is on, any picture will be displayed at the last ratio selected by the user. A message on the  
screen will indicate the current Zoom ratio.  
If zoom mode is on, "FF" and "FR" keys are used to control the ratio of zoom in/out. With ZOOM mode off, a picture  
is scaled to fit the TV screen.  
Notes: During ZOOM function, slideshow transition and image rotation are disabled. TO cancel the ZOOM function,  
press the ZOOM key again and resume the slideshow.  
Digest  
The "MENU" or "STOP" key is used to display thumbnail size pictures. After it is enabled, up to 12 scaled-down  
thumbnail pictures will be displayed on the screen. The "NEXT" and "PREV" keys can be used to display the next/prev  
nine pictures in the the Kodak Picture CD.  
You can select any of the nine displayed thumbnails by using the Arrow Keys and pressing the "PLAY" key. The  
thumbnail will be enlarged to fit the TV screen and the slide show will statr. If you desire to display an image  
indefinitely, press the PAUSE key. To view the Next or Previous picture press NEXT or PREVIOUS keys. To resume  
the slideshow press the PLAY key.  
IMPORTANT NOTE:  
Quality of pictures displayed on the screen is highly dependent on the viewing device.  
page44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USB AND DIGITAL CARD PLAY OPERATION  
USB and DIGITAL CARD (MMC/SD /Memory Stick card ) can memory MP3 songs and digital  
pictures .  
How to select USB/ DIGITAL CARD to play  
1. Turn on the power of this unit .  
2. Insert USB to the " USB" Socket on the side of this unit ; insert MMC/SD/Memory Stick card to  
the DIGITAL CARD Socket .  
USB  
USB  
SD/  
MMC  
MEMORY  
STICK  
DIGITAL CARD  
DVD/CARD/USB  
STOP  
PLAY  
EJECT  
3. Press TV/DVD/AUX/PC to select " DVD " mode .  
4. Press "DVD/CARD/USB" button on the side of the unit or " AUTO/USB/CARD" button on the  
remote control to switch : DVD /USB/CARD.  
POWER  
OSD  
OPEN  
MPX  
1
5
9
2
6
3
7
4
8
AUTO/USB/CARD  
USB  
SD/  
MMC  
USB/CARD  
10/0  
+10  
CAPTION  
MEMORY  
STICK  
DVD/  
MUTE  
LAST  
DVD/CARD/USB  
VOL  
CH  
STOP  
PLAY  
CARD/USB  
EJECT  
TV/DVD  
/AUX/PC  
TV MENU  
OK  
How to play USB /DIGITAL CARD  
1. In DVD mode , press "DVD/CARD/USB" or "AUTO/USB/CARD" button on the remote control  
to switch. Example :  
00:00  
00:00  
001/012 FOLDER  
\
MP3  
JPG  
D U1  
"U1" indicates USB.  
2. Press "DVD/CARD/USB" button or "AUTO/USB/CARD" button on the remote control to switch.  
1) If insert " Memory Stick " card to the DIGITAL CARD socket , the screen displays " U3"  
when the unit was switched to DIGITAL CARD play .  
2) If insert " MMC " card or "SD" card , the screen displays " U4" when the unit was switched  
to DIGITAL CARD play .  
3. When playing MP3 songs and digital pictures in USB and Digitial Card, the unit features mute,  
repeat, and zoom play. Operations are the same as MP3 and Kodak Picture CD operation.  
4. If you are playing USB/MMC/Memory Stick/SD card , this unit will be switched to DVD reading  
mode automatically when pulling the media being played .  
NOTE: According to the content of the USB and DIGITAL CARD , the display picture will be  
different .  
page45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
If you experience the following problems while using the unit, this troubleshooting guide can help you.  
No sound  
Disc cannot be played  
Check if the unit is connected securely.  
There is no disc in the unit.  
Make sure the TV or amplifier is working properly.  
Put the disc on the disc tray properly with the label  
Make sure the amplifier is set to receive DVD signal  
side up.  
output.  
Clean the disc.  
Moisture has condensed in the unit. Remove the  
disc and leave the unit on for about an hour.  
No image  
Check if the unit is connected securely.  
Make sure the TV is working properly.  
The unit doesn't operate normally  
Make sure the color system is set correctly.  
Disconnect the power plug and insert it into the wall  
outlet again.  
Bad sound quality  
Make sure the audio output mode is set correctly.  
Remote control does not work  
Make sure the audio connection between the unit and  
Remove barriers between the remote control and the  
amplifier is in place.  
unit.  
Point the remote control at the remote control sensor  
of the unit.  
Replace the batteries with new ones.  
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other  
intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology  
must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise  
authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.  
page46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TECHNICAL SPECIFICATIONS  
Wavelength 650nm  
NTSC  
Laser  
Video system  
20Hz ~ 20KHz±2.5dB  
Frequency response  
Signal/noise ratio  
Audio distortion + noise  
Channel separation  
Dynamic range  
80dB  
- 60dB (1KHz)  
80dB ( 1KHz)  
80dB ( 1KHz)  
+0.2V  
-0.5V  
output level:  
2V  
Audio out  
(analog audio)  
Load impedance: 10K  
Output  
output level:  
1Vp-p±20%  
Video out  
Load impedance: 75 , imbalance, negative polarity  
Power supply  
Power Consumption  
DC12V, AC100~240V , 50/60Hz  
20W  
This manual is only for your reference, any change to the design and specifications will not be advised.  
page47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LCD VIEWING ANGLE ADJUSTMENT  
Horizontal Adjustment  
5
5
Vertical Adjustment  
10  
page48  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Insignia Video Game Controller NS GPS4HA101 User Manual
Jensen Radio JTA300 User Manual
JOBO Power Supply Premio Battery User Manual
John Deere Snow Blower ST0927 User Manual
Joovy Stroller 320 User Manual
JVC Home Theater System LVT2099 029A User Manual
Keys Fitness Home Gym CM708EL User Manual
KitchenAid Trash Compactor 4KUCS181T User Manual
Klark Teknik Garage Door Opener HELIX DN9848E User Manual
Kodak Digital Camera 3700ix User Manual