ITT TV Antenna CTV 29 100 ST User Manual

CTV 29-100 ST  
Bedienungsanleitung  
Operating Instructions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Television  
Thank you for buying this television which is designed to give you many years of  
satisfactory service.  
You may already be familiar with using a television but do please take time to read these  
instructions. They are designed to familiarise you with the units many new features and  
to ensure you get the very best out of your purchase.  
Special features  
• 100 Hz digital scan.  
• 9 page teletext.  
• Fastext and/or Toptext (Optional).  
• Letterbox, Subtitle 1 & 2, 16:9, 14:9 picture formats ( for Widescreen TV sets) (Optional).  
• Digital Colour Transition Improvement (DCTI).  
• Digital Comb Filter (DCF) (Optional).  
• Digital Luminance Transition Improvement (DLTI).  
• Manual degaussing (Optional).  
• Scan Velocity Modulation (SVM.) (Optional).  
• Dynamic Focus (Optional).  
• 3 step Zoom function (Optional).  
2
• Picture freeze function  
• Automatically switch to stand by in five mihutes after a channel ceases to transmit or  
selecting a channel which has no transmission (Auto off function).  
• Virtual Dolby surround (Optional).  
• Subwoofer (optional).  
• Dynamic Bass Enhancement (Optional).  
• Back audio out.  
• 5 band graphic equaliser.  
• Automatic Volume Limiting (AVL).  
• Programme Editing Table.  
• Naming the channels.  
Your TV can receive stereo channels directly (NICAM optional).  
• Automatic tuning system with country selection (ATS).  
• 100 Programme Memory.  
• Cable/Hyperband tuner.  
• Manual Fine Tuning.  
• Child Lock.  
• Return to the last channel viewed (SWAP).  
• Normalisation system to recall the setting in memory after the volume, colour,contrast,  
brightness settings have been changed (PP).  
• Picture adjustment using one button (Picture Smart Control).  
• Sound adjustment using one button (Sound Smart Control).  
• Advanced On Screen Display.  
• Infrared Remote Control.  
• Programmable on/off timer.  
• Multi language menu system (10).  
• Stereo headphone socket.  
• 2 Scart Sockets: Video cassette recorder, satellite receiver, video disc player,DVD, TV  
games or a home computer can be connected to this AV socket with an appropriate  
connecting cable (3rd Scart socket is optional).  
• S-Video connection.  
• Audio/Video RCA sockets.  
is a registered trademark of ITT manufacturing Enterprises, Inc., a  
subsidiary of ITT Industries, Inc., and is used under license.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety is Important  
Your safety and the safety of others is important. Please, therefore, ensure you read  
the Safety  
instructions before you operate this television.  
Safety instructions  
Read all the safety instructions before first use of your TV.  
!
• Position the television so that direct light does not fall on  
the screen. Excessive light will cause a washed out effect.  
Position the power supply lead and other leads so that  
they are not likely to be walked on or pinched by things  
placed on or against them.  
3
• Do not place objects filled with liquid such as vase or  
flower pot on the television top.  
Do not expose the TV to dripping or splashing of liquids.  
Do not place naked flame sources such as lighted candles  
on the TV set.  
• Make sure that no naked flame sources, such as lighted  
candles, are placed on top of the appliance.  
• Do not place the television near heat sources such as  
radiators, ovens, stoves, etc.  
• Do not use the television near any apparatus that produces  
a magnetic field such as HI-FI speakers or electric motors  
otherwise colourpurity may be affected.  
• The heat built up in the set escapes through ventilation  
holes, so do not cover the set by drapes, clothes etc. that may  
block air circulation. Do not place the television on carpet  
or soft furnishings.  
• NEVER let children push anything into the holes or slots  
on the case.  
• Clean the TV Screen using a slightly damp cloth or chamois  
leather. Never use abrasive cleaning agents like liquid or  
aerosol cleaners.  
• Remove the mains plug from the socket outlet while cleaning.  
• If you wish to place the television on a shelf or in a wall  
unit always ensure there is a minimum air gap of 8 cm  
around the top, sides and rear of the television, to assist  
ventilation.  
• Your TV set is designed to operate with mains voltages  
230VAC; 50Hz. Do not connect your TV set to power sources  
other than the mains supply.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
Please Note  
When not in use disconnect the plug  
from the mains power supply.  
Remove your Television carefully  
from the box. You may wish to  
store the packaging for future use.  
Press the Power button on  
the front of the TV. The  
standby indicator will  
In the box  
Inside your this package you should have:  
illuminate.  
Television  
Remote control  
User guide  
Press a Numeric button or the  
Program up or Program down  
button on the remote handset or  
Program up or Program down  
button on the front panel to  
switch the TV on.  
• AAA batteries x 2  
4
Read these instructions before use.  
Aerial connection  
To connect an aerial, plug the aerial lead  
into the aerial socket on the rear of the  
TV.  
The standby indicator remains on.  
The picture will appear after a  
few seconds.  
Press the Standby button to switch  
the TV to standby. The standby  
indicator will brighter.  
Please Note  
Do not leave the television on standby  
unattended or overnight.  
Switching the TV on for the first time  
To install your TV, please read the sections  
“TV controls” and “ Tuning the television”.  
You can use an outdoor or indoor aerial.  
Battery fitting  
However, if you use an indoor aerial the  
quality of the reception may be reduced  
and adjustment of the aerial may be  
required when changing programs.  
Insert the 2 AAA Batteries supplied into  
the compartment on the rear of the remote  
control, ensure you follow the polarity  
diagram inside the compartment.  
Please note  
If you live in a poor reception area or use an  
indoor aerial you may experience loss or  
corruption of teletext transmissions.  
Switching on  
Mains power  
Connect the mains plug into the mains  
socket and switch on.  
Connect the TV mains plug into your domestic  
mains socket outlet (230 V 50 Hz AC).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control Unit  
Front panel  
Program Down/Up button  
P-  
P+  
Volume Down/Up button.  
V-  
V+  
5
General  
Program ON/OFF switch  
Stand by (Depends on model)  
Stand by indicator  
(External connections: (Rear)  
AV1 scart (RGB)  
External Connections: (Front or side)  
AV3/AV4  
R
Right audio RCA (Red)  
AUDIO  
AV2 scart (Composite)  
L
Left audio RCA (White)  
Video RCA (Yellow)  
AV3 scart (RGB) (Optional)  
Aerial socket  
VIDEO  
Power cable  
S-Video connection  
S-VIDEO  
Headphone socket  
Optional  
SUBWOOFER  
You may wish to connect  
audio amplifier or any  
similar devices to audio  
out. The output is always  
the current channel you  
are watching.  
R
AUDIO  
OUT  
L
It is used for external  
subwoofer in 33” televisions  
Please note  
• See the external connections table on next page for avaible connections depending the size and  
model of your TV set.  
• Do not use Video RCA and S-Video connections at the same time, otherwise they will effect the  
picture each other.  
• RGB inpuks from scart will give you better picture quality.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
External connections table  
Picture tube  
size/typee  
28”  
4:3  
28”  
16:9  
29”  
4:3  
32”  
16:9  
33”  
4:3  
AV1 Scart  
STD.  
STD.  
STD.  
STD.  
STD.  
STD.  
OPT.  
STD.  
OPT.  
STD.  
OPT.  
STD.  
OPT.  
AV2 Scart  
AV3 Scart  
STD.  
OPT.  
Headphone  
socket  
STD.  
STD.  
STD.  
STD.  
STD.  
Audio/Video  
RCA  
OPT.  
OPT.  
OPT.  
OPT.  
OPT.  
OPT.  
OPT.  
OPT.  
OPT.  
OPT.  
S-Video  
socket  
6
Back audio  
out  
OPT.  
OPT.  
OPT.  
OPT.  
OPT.  
STD : Standart  
OPT : Optional  
N/A : Not available  
Please note:  
The Audio/Video RCA, S-Video and Headphone socket can be placed on the front panel  
or on the right-hand side of the cabinet depanding to the model of your TV.  
Remote control  
Standby  
Mute  
Numeric buttons  
OK/Zoom (Opt.)  
Two digit  
AV  
Swap  
Menu  
Program up  
Volume down  
Volume up  
Picture format  
Red teletext button  
Sound Menu button  
Features Menu button  
PAT  
SCAN  
FREEZE  
Reveal info (Text)  
Picture Scan button  
Double heigth (Text)  
Picture Freeze button  
Index page (P100)  
Picture and Text (PAT) button  
TV mode button (Text)  
Sound smart control  
Picture smart control  
SMART CONTROLS  
Picture source button (Text)  
Sound mode button  
Sub page button (Text)  
Clock button  
Green teletext button  
Picture Menu button  
Blue teletext button  
Setup Menu button  
Yellow teletext button  
Program table button  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the TV  
Turning on for the first time and Tuning  
Programme selection  
When you first turn your TV on, “  
Press the Program up or Program  
Language” menu willl appear. To  
search on the languages, use the  
Program up or Program down.  
Volume up or Volume down  
butttons and choose your desired  
language and press “OK” button.  
down buttons on the TV or remote  
control or press a Numeric button  
to select a programme.  
To select a programme whose  
number is greater than 9 using the  
numeric buttons, press the -/--  
button first and then press the two  
Numeric buttons. For example, to  
select programme 12, press the-/--  
button followed by1 and then 2.  
Then “Country Selection” menu will  
appear. Choose your country using  
Program up or Program down.  
Volume up or Volume down and  
press “OK” button. “Autoprogram”  
process will begin and oll the  
channels will be searched and stored.  
7
You can also select a program by  
pressing in the Yellow button to  
see the Program Table.  
TV controls  
Stand-By mode  
When your TV is working on, press  
the red “STAND-BY” button on the  
right upper corner of your remote  
control to switch off and the Stand-  
By indicator (Led) will be brighter.  
To turn on your TV again, press one  
off the numaric buttons, Program up  
or Program down.  
PROGRAM TABLE  
P00 ----  
P01 ITV  
P02 TV4  
P03 CNN  
P005 P010  
P006 P011  
P007 P012  
P008 P013  
P04 BBC1 P009 P014  
SKIP DELETE MOVE NAME  
Please Note: If you will not use your TV for  
a long time, do not leave it on Stand-By mode,  
instead switch it off from the power button  
on the front panel of the TV set. If you always  
leave your TV on Stand-By mode,  
demognetization process will notoccur and  
that will couse coloring problems. If you  
occurs, press the power button to switch off  
your TV and weit until it cools off.  
Use theProgram up and Program  
down buttons to scroll through the  
programme numbers. When you  
find the program number you want  
press theOK button again.  
Press theTV/TX button to close the  
Program Table.  
Volume  
Mute  
Press the Volume + or Volume -  
button on the TV or the Vol or  
Vol button on the remote control.  
A sound level bar will appear on the  
screen.  
To mute the sound press the Mute  
button on the remote control. A  
loudspeaker symbol will appear on  
the screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press the Mute button again to  
restore the sound. The symbol  
will disappear.  
Tuning the television  
There are two ways of tuning your television:  
Manual, where you control the tuning process  
or  
Autoprogram where the television does it all  
automatically.  
Pressing Volume up buttons  
will also restore the sound.  
But pressing the Volume down  
button will increase the volume  
without restoring.  
Your TV will sort all the channels with the  
ATS. Sorting will be performed in the  
following order:  
PP  
Personal preference. Press the  
PP  
button to revert to the  
default settings for the TV.  
(See TV setup).  
a- Selected country’s channels with teletext  
and channel names.  
b- Selected country’s channels with teletext  
and without channel names.  
c- Selected country’s channels without  
teletext.  
Swap  
Select the programme you would  
like to recall by pressing SWAP  
button. Selected programme  
number will appear on the upper  
left side of the screen. While  
d- Foreign channels with teletext and channel  
names.  
8
watching any programme, you  
can recall the selected one by  
pressing SWAP button again.  
If you press swap button again you  
can recall the last programme you  
watched. You can cancel SWAP  
function by pressing MENU button.  
Please Note  
If the TV is set to a channel with no signal the  
TV will return to standby in 5 minutes.  
The last minute remaining is displayed on  
the screen.  
SWAP  
SWAP  
PR 01  
PR 11 PR 12  
PR 13...  
PR 01  
Automatic tuning (Autoprogram)  
There are two ways to access the SETUP  
menu:  
AV  
Your TV has 2 ( 3. scart opt. ) scarts  
so every time you press your AV  
button, your input will change as  
follows:  
Press the blue Setup button.  
or  
Press the Menu button and use the  
Program down button to select  
SETUP. Press the OK button to  
enter the SETUP menu.  
1 AV1 when using SCART socket 1  
(RGB support) (Option).  
2 AV2 when using SCART socket 2.  
3 AV3 when using SCART socket 3  
(RGB support) (Optional).  
4 AV3-S for S-Video equipment to scart 3  
(S-VHS/Scart adapter is needed).  
5 AV4 when using the RCA sockets  
of the TV.  
MAIN MENU  
6
AV4-S when using the S-video socket.  
Press the AV button again to  
return to TV.  
SETUP  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Please note  
Manual tuning  
If you want to tune manually:  
The system will displayed automatically on  
SYSTEM row i.e.BG, L, I, DK depending  
the receiving broadcasting system of the  
country. In some countries the broadcasting  
system can be both in BG/DK or BG/LL´.  
Only the TV sets produced with Pal Secam  
BG/DK or Pal Secam BG/LL´ systems can  
receive both BG/DK or BG/LL´ broadcasts.  
In this case the user can select the required  
SYSTEM using Volume up/down buttons.  
In the Setup menu select  
PROGRAM NO using  
the Program down button  
and use the Volume up  
button to change the Program No  
to 01.  
Starting with Program 01, tune  
in the first channel as follows:  
Please note  
If you do not press any buttons for 15 seconds  
the TV will exit the menu system.  
Use the Program down button  
to select SEARCH.  
Use the Program down button to  
select AUTOPROGRAM and  
press  
the OK button. A list of  
countries will appear. Select  
the desired country using  
Press the Volume up or Volume  
down button to start the tuning  
search.  
9
When the search finds a strong  
channel signal it will stop  
Program and Volume buttons.  
searching. The picture will appear.  
When you are sure the aerial is  
connected properly press the OK  
button. Autoprogam will start.  
AUTOPROGRAM will flash.  
SETUP  
To cancel Autoprogram whilst it  
isworking press the Menubutton  
repetitively.  
As Autoprogram stores a channel  
it will appear briefly on the screen  
before the search continues.  
Use theProgram down button to  
select PROGRAM NO.  
Your TV is now tuned and ready to use.  
Please note:  
Use theVolume up/down  
or numeric  
buttons to select the desired  
programme number.  
If auto sort fails to arrange the programmes  
in the required sequence please refer to  
programme organising.  
Use the Program down button to  
select STORE. Press theOKbutton  
and STORED will appear on the  
STORE line.  
You have now stored the first  
channel.  
Use the Program up button to  
select again SEARCH and  
continue the tuning procedure  
until you have tuned in all the  
programmes you want or the  
television can receive.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuning with channel numbers  
Enter the SETUP menu by pressing  
the blue button.  
Fine tuning  
Although the search and Autoprogram  
will automatically try and tune to the  
best reception, in areas of poor reception  
a bit of fine tuning may be required.  
Press OK button when CHANNEL  
row is blue.  
In the SETUP menu use the  
Program up/down buttons to  
select FINE TUNING. Use the  
Volume up and Volume down  
buttons to fine tune.  
Use OK button to select “S” for  
cable channels and “C” for  
terrestrial broadcast.  
Enter the channel number using the  
Numeric buttons or use the  
Volume up/down buttons on your  
remote control.  
When you have finished use the  
Program down button to select  
STORE and press the OK button.  
Use the Program down button to  
select PROGRAM NUMBER.  
10  
Use the Volume up/down or  
numeric buttons to select the desired  
programme number.  
SETUP  
+ 10  
Use the Program down button to  
select STORE. Press the  
OKbutton  
and STORED will appear on the  
STORE line.  
You have now stored the first  
channel.  
Use the Program up button to  
select again CHANNEL and continue  
the tuning procedure until you  
have tuned in all the programmes  
you want or the television can  
receive.  
To exit the SETUP menu press the  
TV/TX button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Please Note  
Program organising  
Some TV channels may send their  
names with teletext transmission. In this  
case their names will be automatically  
shown on the name line.  
Once you have tuned in all the channels you  
want, you can change their programme  
number, if required, and name them.  
To enter the PROGRAM TABLE  
menu press the Menu button and  
select PROGRAM TABLE and press  
the OK button or press directly the  
Yellow button.  
To move the programmes  
You can move the programmes around the  
programme list to the order you want  
Select the programme you want to  
move and press the Green button.  
The programme will turn to yellow.  
Select the number you want to move  
and press the Green button  
again and the programme will be  
moved to that number.  
PROGRAM TABLE  
P00 ----  
P01 ITV  
P02 TV4  
P03 CNN  
P005 P010  
P006 P011  
P007 P012  
P008 P013  
11  
P04 BBC1 P009 P014  
All the following programmes are  
shifted down by one place.  
SKIP DELETE MOVE NAME  
To delete a programme  
PROGRAM 01 will be selected and the  
channel stored under PROGRAM 01 will be  
shown on the screen.  
To delete a programme, select it and  
press the Pink button.  
The programme will be deleted.  
The details of the program will be shown  
across the top of the screen i.e. P1 CH31.  
All the following programmes are  
shifted up by one position.  
The buttons used to edit the programs are  
shown at the bottom of the display:  
To skip programmes  
Skipped programmes will not appear  
when you move through the program  
list using the Program up/  
Program down buttons.  
They can still be selected using the  
numeric buttons or the OK button.  
Blue button  
Green button  
Pink button  
Red button  
-
-
-
-
Name  
Move  
Delete  
Skip  
To name the programmes  
Press theBlue button, the selected  
line will turn blue and the CH will  
be highlighted.  
Select the programs you want to  
skip  
and press the Redbutton. The  
program will turn red. To unskip the  
program press the Redbutton again.  
Use theProgram up and Program  
down buttons to select the letters  
and numbers and theVolume up  
and Volume down buttons to  
move through the name.  
To exit the PROGRAM EDIT press  
the TV/TX button once or the  
Menu button twice.  
When you select a programme, the  
information you entered in the  
PROGRAM EDIT menu will appear  
on the top of the screen i.e. P1  
Press the Blue button again to store  
the name.  
BBC1.  
Repeat this process to name all the  
programmes.  
This will disappear after  
about three seconds.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Volume  
TV set up  
The TV set up is accessed through a menu  
system.  
Sets default volume using the Volume up  
and down buttons.  
To save your settings, select  
STORE  
STORED  
the Menu button to go back to  
the previous menu.  
and press the OKbutton.  
will be displayed. Press  
Once you have stored your set up, this is the  
set up the TV will default to when you switch  
it on.  
To enter the MAIN menu press the  
Menu button.  
Balance  
Sets the sound balance  
mode using the Volume up  
and down buttons  
Once in the MAIN menu use the  
Program up and Program down  
buttons to select items in the menu  
and the OK to access sub menus  
or use the coloured fastext buttons  
for quick access.  
To save your settings, select  
STORE  
and press the OKbutton.  
STOREDwill be displayed. Press  
the Menu button to go back to the  
previous menu.  
12  
Red button - SOUND  
Green button - PICTURE  
Pink button - FEATURES  
Sound type  
This item shows STEREO when receiving  
stereo  
transmissions.  
transmission and MONO for mono  
MAIN MENU  
The TV can be produced to receive the  
NICAM broadcasts as a optional  
feature.  
If the channel you are watching is in  
Nicam stereo the On Screen Display  
will show NICAM STEREO for a  
while.  
Please note  
If you do not press any buttons for 15 seconds  
the TV will exit the menu system.  
Please Note  
If, while watching a nicam stereo channel,  
the signal strength drops and the system  
cannot receive nicam stereo the OSD will  
show MONO. If the signal strength  
increases again and nicam stereo can be  
received again, the OSD will show  
NICAM STEREO.  
Sound menu (red button)  
SOUND  
VOLUME  
Dual I/II  
BALANCE  
SOUND TYPE  
STORE  
Some broadcasters supply the programmes  
in two languages. To able to listen the  
second language select DUAL II by  
SOUND TYPE using Volume up/down  
buttons.  
MONO  
HEADPHONE  
SOUND FEATURES  
To save your settings, select STORE  
and press theOK button. STORED  
will be displayed. Press the Menu  
button to go back to the previous  
menu.  
Select the required item in the menu  
using the Program up/down buttons  
and make the changes pressing  
Volume up/down buttons. Use the  
OK button to enter HEADPHONE  
and SOUND FEATURES sub  
menus.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press OK to enter the Sound Features.  
Headphone  
You can set up the volume, balance, bass  
treble and sound type (stereo or mono)  
of the headphone output.  
Use OK button to enter the HEADPHONE  
menu.  
SOUND FEATURES  
SOUND MODE  
AVL  
SPATIAL  
ON  
ON  
DYNAMIC BASS  
EQUALIZER  
HEADPHONE  
VOLUME  
BALANCE  
BASS  
Sound mode  
TREBLE  
You can select NORMAL, SPATIAL or  
DOLBY VIRTUAL (optional)using the  
Volume up/down buttons.  
MONO  
SOUND TYPE  
STORE  
SPATIAL sound is an ‘expanded stereo’. It  
gives the impression that the two speakers in  
the TV are further apart than they really are.  
13  
To save your settings, select STORE  
and press theOK button. STORED  
will be displayed. Press theMenu  
button to go back to the previous  
menu.  
“Virtual Dolby Surround sound is based on  
Dolby Pro Logic decoding for the  
reproduction of Left, Right, Centre and  
Surround channels using two loudspeakers.  
Manufactured under license from Dolby  
Laboratories.  
Sound Features  
“Dolby”, “Pro Logic” and the double-D  
symbol are trademarks of Dolby  
Laboratories.  
You can set up the Sound Mode, AVL Mode  
Dynamic Bass (Optional), Subwoofer  
(Optional) and Equalizer from Sound  
Features menu.  
Please Note  
To get the surround effects in “ Dolby Virtual”  
mode, you must apply a Dolby Pro Logic  
coded input to the TV. You can’t adjust the  
AVL and EQUALIZER in DOLBY VIRTUAL  
mode.  
To access the Sound Features menu press  
the Red button on the remote control and  
press Volume down button to select Sound  
Features.  
AVL  
TV transmitters have different sound levels.  
AVL (automatic volume limiting) maintains  
the same sound level as you switch from  
program to program.  
To apply this press Volume up or down  
button and select ON for AVL in Sound  
Features menu.  
Dynamic Bass (Optional)  
To give depth effect to bass sound you can  
select Dynamic Bass as ON.  
To supply this press Volume up or down  
button and select ON for Dynamic Bass in  
Sound Features menu.  
Note: If you select Dynamic Bass as ON  
Subwoofer will also be automatically ON.  
(If the set has subwoofer option).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Equalizer  
Once you have switched the TV off  
the equalizer setting will revert to the  
stored setting.  
To access the 5 band equalizer menu  
press Volume up or down button  
and press OK on the Equalizer line.  
When you have finished in the  
Sound sub-menu select STORE and  
press the OKbutton.  
EQUALIZER  
MUSIC  
SPORTS  
CINEMA  
SPEECH  
To exit the sub-menu press the  
Menu button and return to the  
main menu.  
USER1  
USER2  
100 330  
1
3.3  
10  
Hz Hz KHz KHz KHz  
Picture menu (Green button)  
PICTURE  
In this menu there are a series of preset  
equalizer settings for different types  
of sound output.  
There are four music settings - MUSIC,  
SPORTS, CINEMA, SPEECH and  
USER1 & USER2 modes.  
14  
BRIGHTNESS  
CONTRAST  
COLOUR  
SHARPNESS  
STORE  
PICTURE FEATURES  
USER modes allow you to set your own  
sound outputs as follows:  
The picture menu allows you to set up the  
following:  
BRIGHTNESS  
CONTRAST  
COLOUR  
Press the OK button to enter the  
EQUALIZER menu.  
Use the Program downbutton to  
select USER1.  
Press OK button to adjust the  
frequency band levels.  
SHARPNESS  
and the other PICTURE FEATURES  
Use the Volume up button to select  
the KHz column you want to  
change.  
To change, for example, the colour,  
select it using Program up and down  
buttons.  
Use the Program up/down  
buttons to make the changes.  
Use the Volume up and Volume  
down buttons to change the setting.  
To save your settings, press the OK  
button. Press the Menu button to  
go back to the previous menu.  
To save your settings, select STORE  
and press theOKbutton. STORED  
will be displayed.  
You can also adjust the settings of USER2  
by the same method.  
These settings are stored as USER  
picture type.  
You can change the equalizer setting  
whilst watching the TV using the  
sound Smart control.  
You can change the picture type whilst  
watching the TV using the picture Smart  
control.  
Press the sound Smart control to  
page through the different equalizer  
settings and select the one you  
want.  
Press the picture Smart control to  
page through the different picture  
types and select the one you want:  
SOFT, NATURAL, RICH or USER.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture Features  
In the picture menu use the  
Features Menu (Purple button)  
To select Features menu press  
the menu button and using the  
Program up and down buttons  
select Features.  
Program down button to select  
PICTURE FEATURES and  
press OK.  
In this menu you can adjust the  
picture quality features.  
You can also select the Features  
menu directly by pressing the  
purple button on the remote  
control.  
Use the Program up and down  
buttons to select your desired  
picture feature and use Volume  
up and down buttons to adjust  
this feature.  
The Features menu allows you  
to set up the following:  
CHILD LOCK  
BLUE BACK  
DEGAUSS (opt.)  
AV OUT  
NOISE REDUCTION: You can  
reduce the noise effects in the  
pictures by selecting low, medium  
or high.  
15  
LANGUAGE  
TIMER  
CTI (Colour Transient Improvement):  
You can improve the colour transitions in  
the picture by selecting ON or OFF.  
Use the Program up and down  
buttons to select the feature you  
wish to change and use Volume  
up and down buttons to adjust  
this feature.  
PICTURE FEATURES  
NOISE REDUCTION  
CTI  
LOW  
ON  
IMPORTANT NOTE: Your TV has Digital  
Comb Filter and DLTI (Digital Luminance  
Transient Improvement) features to improve  
picture quality. These features are set ON  
and they can not be changed by the end user.  
FEATURES  
CHILD LOCK  
BLUE BACK  
DEGAUSS  
OFF  
OFF  
OFF  
TV  
SCART SOURCE  
LANGUAGE  
TIMER  
AV2 & AV3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Child Lock: Using the Child  
Lock, you can lock any Program  
you want so that adult channels  
can not be watched by children.  
Language: You can select one of the 10  
languages by pressing OK button in the  
language selection.  
Timer: Use Program up and down  
buttons to select Timer in the features  
menu. Using the Timer fuction, you can  
switch to a specific programme at a pre-  
programmed time or you can turn your TV  
off at the time you want your TV to be  
turned off.  
You can cancel child lock any time  
you want. To cancel Child Lock,  
select Child Lock as OFF when  
you are watching that program.  
Blue Back (Optional): When there  
is no broadcast, you can select the  
background purely blue instead  
of snowy picture.  
Press OK to access the Timer menu.  
TİMER  
Select blue back as ON.  
CLOCK  
17:10  
--/--  
--/--  
P05  
16  
ON TIME  
OFF TIME  
PROGRAM NO  
Degauss (Optional): If you leave your TV  
on stand-by mode for a long time or  
because of strong electro-magnetic field  
sources, there may be cloudy effects over  
the picture.  
Clock: Use the numeric buttons to set the  
real time.  
To prevent such effects select DEGAUSS  
and press Volume up button.  
DEGAUSS will be ON for a short time,  
the screen will be cleaned and DEGAUSS  
will be OFF again.  
On Time: Use the numeric buttons to set  
the time that you want your TV to be turned  
on (TV should be on stand-by mode).  
Off Time: Use the numeric buttons to set  
the time that you want your TV to be turned  
off (Stand-by mode).  
Scart Source: You can select the output  
from your TV to the devices connected to  
your 2nd and 3rd scarts. So if you want to  
record or copy the program you are  
watching, you should output this program  
to AV2 or AV3, inputs.  
Program No: Use the numeric buttons to  
set the programme number that will be  
shown when you set the On Time.  
The following options are possible  
• TV¡AV2 & AV3: The current program  
you are watching,  
• TUNER ¡AV2 & AV3: The program you  
have last selected,  
AV1, AV2, AV3, AV3-S, AV4, AV4-  
S¡AV2 & AV3: The devices connected to  
these inputs; are output to the 2nd and 3rd  
scarts.  
Note: 3rd. Scart is optional.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture format  
You can adjust the picture format  
Subwoofer (optional)  
A sub woofer speaker can be fitted  
within the TV case as an option  
depending to the model.  
of your TV according to the  
program format you are watching.  
Press the “16:9” button to change  
the Picture format.  
For 33”(84cm) TV sets there  
is an external subwoofer (optional)  
to be fixed as shown below.  
Avaible formats are 16:9, 14:9, 4:3,  
Letterbox, Subtitle1, Subtitle2 (Optional).  
16:9 and 14:9 are the screen formats of  
widescreen TV sets (28” SF/PF, 32” SF/PF).  
The TV will automatically switch to this  
format if it detects 16:9 format from the  
SCART inputs.  
16:9 Colour television  
4:3 Colour television  
R
17  
AUDIO OUT  
L
AV3  
4:3 TV  
picture format.  
AV1  
AV2  
Select Sound menu and press  
Program down button to access  
Sound Features menu.  
14:9 TV  
picture format.  
Press Program down button and  
select SUBWOOFER line.  
16:9 TV  
picture format.  
Press the Volume up button to  
switch the Subwoofer on or off.  
L Box (Letter box), Useful for watching  
video, some film formats and Pal-Plus format.  
SOUND FEATURES  
SOUND MODE  
AVL  
SUBWOOFERL  
DYNAMIC BASS  
EQUALIZER  
SPATIAL  
ON  
ON  
ON  
Subtitle1:If you can not see subtitles at the bottom of the  
screen, especially when watching 4:3 pictures in Letter box  
format, select Subtitle1.  
Note: If your TV has Subwoofer and if  
you turn on the Dynamic Bass, the  
subwoofer will also automatically  
turn on. You can not turn your subwoofer  
off when Dynamic Bass is on.  
Subtitle2:When Subtitle1 is not enough,select the picture  
format as Subtitle2.  
Setup menu (blue button)  
Program table menu (yellow button)  
These two menus are explained under  
Tuning the TV’and “Program Organising”.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER FEATURES  
PAT (Picture and Text)  
In the double window function, you can also  
display the teletext screen in the second  
window. Press the PAP button to see the  
double window function and then press the  
purple button on the remote control to see the  
PAT mode.  
Picture freeze  
When you press "FREEZE" key on  
your remote control, the picture on  
the screen becomes fixed. To get  
out of the position, press the same  
key again.  
FREEZE  
TeleText  
Mode  
Picture scan (Optional)  
You can scan the programmes  
starting from the current programme  
you have been watching, on the  
screen within twelve frames. Press  
"SCAN" key on your command  
for this.  
SCAN  
To view the desired one from these  
programmes, press "OK" during  
scanning. The programme you  
chose will appear on the screen. To  
exit, press "SCAN" key.  
18  
Blank programmes will not be  
scanned.  
Zoom Function (Optional)  
Pressing OK button zooms in to the  
picture. Zoom function is  
performed towards the center of  
the picture.  
There are 3 steps Zoom, each time  
you press the OK button.  
ZOOM1, ZOOM2, ZOOM3.  
You can also scroll on the picture  
by pressing Program up or down  
and Volume up and down buttons.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Teletext  
Teletext is an information system that displays  
text on your TV screen. Using the teletext  
control buttons you can view pages of  
information that are listed in the teletext  
index.  
TV/text mix  
To view a page of text whilst  
watching a TV programme press  
theMIX  
button. The text will be  
superimposed over the TV  
programme.  
Please Note  
No on screen display is available in text mode.  
The contrast, brightness and colour cannot be  
changed but the volume control is still  
available.  
Press the MIX button again to return  
to the text page.  
Page search whilst watching TV  
In Text mode press theUpdate  
button. The TV will return to TV  
mode with the text page number in  
the top left hand corner of the  
screen.  
19  
To enter Text mode  
Please Note  
Make sure the TV channel you are watching  
transmits teletext.  
Enter the page number you want  
using the Numeric buttons.  
Press theTV/TEXTbutton. The text  
page will appear, normally the index  
page.  
The top line of the text page will  
appear whilst the text searches for  
your page. When the page is found  
the number will remain in the top  
left hand corner of the screen.  
To exit Text mode  
Press the TV/TXTbutton. The TV  
will return to the channel you were  
watching.  
Press the Update button to view  
your selected page of text.  
To select a page of text  
Find the number of the page in the  
index and enter it using the  
Numeric buttons. The number of  
the page will appear in the top left  
hand corner of the screen.  
Double height text  
If you have difficulty reading the  
text on the TV you can double the  
height of the text.  
The page counter will search for your  
page. When it finds it, the page will  
be displayed.  
FREEZE  
Press the Double height button.  
The top half of the page will be  
displayed in double height text.  
To move to the next page of text  
press the Program up button.  
FREEZE  
Press the Double height button  
again. The bottom half of the page  
will be displayed in double height  
text.  
To move to the previous page press  
the Program down button.  
FREEZE  
PAT  
Press the Double height button  
again to return to the full page.  
To return to the index page press the  
P100 button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Page Stop  
If the page of text you have selected  
To reveal information  
Press the Rev button to reveal  
concealed information (quiz  
answers etc.).  
SCAN  
contains sub pages, these sub pages  
will automatically be displayed in  
order with a delay to allow you to  
read the page.  
SCAN  
Press the Revbutton again to  
conceal the information again.  
To stop the move to the next sub  
page press theHOLDbutton. STOP  
will appear in the top left hand  
corner.  
Clock  
Press the Sub button, whilst  
watching a TV program , to  
display the time.  
To continue moving through the sub  
pages press theHOLD button again.  
Fast text  
At the bottom of the teletext screen is a row  
of subject headings in red, green yellow and  
blue.  
20  
To select a sub page  
If the page of text you are viewing  
contains sub pages, the number of  
the sub page you are on and the total  
number of sub pages is displayed on  
the right of the screen i.e. 1/7.  
The remote control has a row of coloured  
buttons corresponding to the row of  
coloured subjects on the screen.  
To select a sub page press the SUB  
button. The number in the top left  
hand corner will be replaced by S  
followed by 4 asterisks.  
Pressing one of the coloured buttons will  
take you directly to the page  
corresponding to the subject heading.  
Enter the number of the sub page,  
using theNumeric buttons in the  
format S0001 for sub page 1.  
Toptext (optional)  
5
At the bottom of the teletext screen is a row  
of subject headings in yellow and blue.  
Pressing yellow or blue buttons on the  
remote control, selects the related Subject.  
Next page can be selected by pressing the red  
button and previous page can be selected  
by pressing the green button.  
The teletext will search for the sub  
page. This may take some time. To  
return to the TV whilst the teletext  
is searching press the Update  
button.  
Note: Fastext and Toptext features are not  
available in every program.  
When the page number is found it  
will appear in the top left hand  
corner of the screen.  
Press the Update button again to  
view the text page.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting external  
equipment  
You can connect a wide range of audio and  
video equipment to your TV.  
Via RCA lead (optional)  
Make sure the TV and video recorder are  
both switched off.  
Connecting a video  
recorder  
Plug one end of the RCA lead into the video  
and audio out sockets on the back of the  
video recorder and plug the other end into  
the video and audio in sockets of the TV.  
Via SCART  
Make sure the TV and video recorder are  
both switched off.  
21  
Plug one end of the SCART lead (not  
supplied) into the back of the video recorder  
and the other end into one of the SCART  
sockets on the back of the TV.  
If the sound is in mono use the Audio Input  
L. In the SOUND menu select MONO.  
Press the AV button repetitively  
and select the AV3 (AV4 optional)  
mode.  
AV  
Switch on the video recorder and the TV.  
Press the AV button on the remote  
control to select AV1, AV2 or AV3  
(optional) to correspond with  
SCART socket you are using on  
the back of the TV.  
Please note:  
When using RCA lead, you should select AV4  
in 3 Scart models and AV3 in 2 Scart models.  
AV  
Please note:  
You can connect a RGB external equipment  
via Scart 3 (optional) or Scart 1. It is necessary  
to you use full Scart cable for this purpose.  
Select the video outputs of external device  
by using its menu to RGB if it’s avaible.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Via aerial socket  
Make sure the TV and video recorder are  
both switched off.  
S-Video Player  
If you have an S-Video player you can  
connect it to SCART socket 3 (optional)  
via an adaptor from scart to S-Video/RCA  
audio (not supplied).  
Unplug the aerial lead form the TV and plug  
it into the aerial socket on the video  
recorder (if fitted).  
Press the AV button repetitively  
to select AV3-S.(3 scart models only)  
AV  
Plug a coaxial plug into the RF out socket on  
the rear of the video recorder and plug the  
other end into the aerial socket of the TV.  
Via RCA lead and S-Video socket  
You can also connect it through the  
S-Video socket of the TV.  
Switch on the video recorder and the TV.  
If your video recorder has a test signal, switch  
it on. (Refer to the video recorder user guide).  
Plug the S-Video plug into the S-Video  
socket and the audio leads into the audio  
sockets.  
22  
See ‘Tuning the TV’ and carry out the tuning  
procedure for the video recorder test signal.  
Select a programme number 0.  
Press the AV button repetitively  
to select AV3-S or AV4-S (optional).  
AV  
AV3/AV4  
R
L
R
VIDEO  
AUDIO OUT  
L
AV3  
AV1  
AV2  
AV3/AV4  
R
L
VIDEO  
S-Video In  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Via RCA lead (optional)  
Make sure the TV and DVD player are both  
switched off.  
Connecting a DVD  
player  
Via SCART  
Make sure the TV and DVD player are both  
switched off.  
Plug one end of the RCA lead into the video  
and audio out sockets on the back of the  
DVD player and plug the other end into the  
video and audio in sockets of the TV.  
Plug one end of the SCART lead (not  
supplied) into the back of the DVD player  
and the other end into one of the SCART  
sockets on the back of the TV.  
Press the AV button repetitively and  
select the AV3 (AV4 optional) mode.  
AV  
Switch on the DVD and the TV.  
Via RCA lead and S-Video socket  
You can also connect it through the  
S-Video socket of the TV.  
Press theAV button on the remote  
23  
control to select AV1, AV2 or AV3  
correspond with SCART socket  
you are using on the back of the TV.  
AV  
Plug the S-Video plug into the S-Video  
socket and the audio leads into the audio  
sockets.  
Note: Scart 1 and Scart 3 (optional)  
will give you RGB picture quality.  
For DVD connections RGB capable scart  
sockets (AV1 or AV3) are recommended.  
Press the AV button repetitively  
to select AV3-S or AV4-S (optional).  
AV  
AV3/AV4  
R
L
R
VIDEO  
AUDIO OUT  
L
AV3  
AV1  
AV2  
AV3/AV4  
R
L
VIDEO  
S-Video In  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting a decoder  
Via SCART  
Make sure the TV and decoder are both  
switched off.  
Plug one end of the RCA lead into the video  
and audio out sockets on the back of the  
decoder and plug the other end into the video  
and audio in sockets on  
the TV.  
Press the AV button repetitively and  
select the AV3 mode (AV4 optional).  
Plug one end of the SCART lead (not  
supplied) into the back of the decoder and the  
other end into the SCART 1  
on the back of the TV.  
Please Note  
You can record from one external device to  
another via scart sockets. You should select  
the source and destination of video using  
FEATURES menu. If you select the source  
as AV3/AV3-S or AV4/AV4-S (optional) you  
will have a “ WARNING: COPY  
Switch on the decoder and the TV.  
Press the AV button on the remote  
control to select AV1.  
AV  
24  
FUNCTION ACTIVE” message on the  
screen. You will not have picture at  
AV4/AV4-S if you select source  
Via RCA lead  
Make sure the TV and decoder are both  
switched off.  
AV3/AV3-S or vice versa.  
You can connect NTSC supported equipment  
to the TV via the SCART sockets and  
adjusting the colour via the PICTURE  
menu.  
Note: For Decoder connection Via RCA  
lead your Decoder device should have the  
tuner built in.  
AV3/AV4  
R
AUDIO OUT  
L
AV3  
AV1  
AV2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting TV with video and satellite/digital  
receiver  
ANT IN  
Scart 1 TV IN/OUT  
Scart 2 AUXIN  
Scart Socket  
ANT OUT  
Antenna  
socket  
DIGITAL SATALLITE RECEIVER  
VIDEO RECORDER  
BEHIND THE TELEVISION  
25  
Connecting TV with camcorder  
AV1/AV2/AV3  
AV3  
(3 scart models only)  
AV3/AV4  
R
L
VIDEO  
S-Video In  
S-Video camcorder  
Camcorder  
Connecting TV games and computer  
AV1  
AV3/AV4  
R
L
VIDEO  
S-Video In  
S-Video TV Game Player  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Help and service tips  
No sound  
TheTVdoes not work  
Make sure it is plugged into the mains supply  
and switched on.  
Is the sound muted? Press the Mute  
button.  
Is the volume turned down?  
Are there headphones connected?  
Poorpicture  
Is the aerial plugged in?  
Sound coming from only one  
speaker  
If you are using a set top aerial is it  
properly aligned for the best signal.  
Make sure the aerial is not to close to  
neon lights, loudspeakers etc.  
Try changing the direction of the outdoor  
aerial. High buildings and mountains can  
cause ghost pictures or double images.  
The picture quality may be reduced by  
connecting two external sources at once.  
Disconnect one of the sources.  
Is the balance set to one side? See the  
sound menu.  
If you have external speakers, has one of  
them become disconnected.  
No response to the remote control  
Try changing the batteries.  
Is there an obstruction between the  
remote control and the sensor on the TV.  
26  
Adjust the fine tuning.  
If nothing works  
No picture  
If you have tried the above solutions and none  
seem to work, try switching the unit off and  
on again.  
Is the aerial plugged in properly?  
Is the aerial lead damaged?  
Are all the plugs in the aerial lead fitted  
correctly?  
If this does not work contact your supplier or  
TV repair technician. Never attempt to  
repair a defective TV yourself.  
Have you pressed the correct buttons on  
the remote control?  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical specifications table  
Picture tube 28”  
28”  
28”  
29”  
29”  
32”  
32”  
33”  
4:3  
size/typee  
4:3  
16:9 SF 16:9 PF 4:3 SF 4:3 PF 16:9 SF 16:9 PF  
Screen size  
70 cm 70 cm 70 cm 72 cm 72 cm 82 cm 82 cm 84 cm  
66 cm 66 cm 66 cm 68 cm 68 cm 77 cm 77 cm 80 cm  
2x12 W 2x12 W 2x12 W 2x12 W 2x12 W 2x12 W 2x12 W 2x12 W  
90 W 100 W 100 W 105 W 105 W 110 W 110 W 125 W  
Visible  
screen size  
Sound Output  
(%10 THD)  
Power  
consumption  
Stand by  
Power  
consumption  
4 W  
4 W  
4 W  
4 W  
4 W  
4 W  
4 W  
4 W  
optional optional optional optional optional optional optional optional  
20 W 20 W 20 W 20 W 20 W 20 W 20 W 20 W  
Subwoofer  
27  
Dolby  
Virtual  
optional optional optional optional optional optional optional optional  
SF : Superflat picture tube  
PF : Pureflat picture tube  
16:9: Widescreen TV  
4:3 : Conventional TV  
Please note:  
Using a subwoofer causes 20 W extra power consumption and supplies maximum 20 W  
extra sound output.  
General technical specifications  
Power Supply  
AC: ................................................... 230-240V50Hz  
Number of preset programmes ......... 100  
RFAerial input .................................... 75 ohm (unbalanced)  
Speaker empedance ........................... 8 ohm  
Sound Systems...................................... Mono/Stereo/NICAM (optional)  
Batteries ............................................ 2x AAA  
Receiving channels ............................... VHF (Band I Channels 2-4)  
............................................................. VHF (Band III Channels 5-12)  
............................................................... UHF(Channels 21-69)  
.............................................................. Cable TV (S1-S20/S21-S41)  
Please note: Your TV set is produced to receive only “one “ of this colour and sound system  
options which is based one your countries norms and can not be changed by user except  
BG/DK and BG/LL´ if both systems are avaible to receive (BG or DK and BG or LL´). Please  
refer to “Tuning the TV”.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BCE.801  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Refrigerator RA 24I S User Manual
Insignia Model Vehicle NS 32D200NA14 User Manual
Insignia Video Game Headset NS PAH5101 User Manual
JAI Security Camera CV M538 User Manual
Jenn Air Food Warmer JWD2030WS User Manual
JVC DVD VCR Combo MV45U User Manual
Karcher Pressure Washer K 550 M User Manual
Kenmore Marine Battery 4272 User Manual
KitchenAid Double Oven KEBS177X User Manual
Konica Minolta Marine Radio CS 2000 User Manual