U
STIGA
V
M U LT I C L I P
1
48
48 E
SVENSKA ............................... 1
SUOMI .................................... 7
DANSK ................................. 13
NORSK ................................. 19
DEUTSCH ............................ 25
ENGLISH .............................. 31
FRANÇAIS ............................ 37
NEDERLANDS ...................... 43
ITALIANO .............................. 49
ESPAÑOL ............................. 55
PORTUGUÊS ....................... 61
POLSKI ................................. 67
LATVISKI .............................. 73
LIETUVIŠKAI ........................ 79
êìëëäàâ ............................ 85
ČESKY ................................. 91
SLOVENSKO ........................ 97
PRO 48
51 S
BRUKSANVISNING
KÄYTTÖOHJEET
WA
51 SE
L
BRUGSANVISNING
Model: . . . . . . . . . . . . . . . .
Type: . . . . . . . . . . .
BRUKSANVISNING
PRO 51 S
GEBRAUCHSANWEISUNG
INSTRUCTIONS FOR USE
MODE D’EMPLOI
dB
A
GEBRUIKSAANWIJZING
ISTRUZIONI PER L’USO
INSTRUCCIONES DE USO
INSTRUÇÕES DE UTILIZAÇÃO
INSTRUKCJA OBSŁUGI
LIETOŠANAS PAMÅC BA
NAUDOJIMOINSTRUKCIJA
àçëíêìäñàü èéãúáéÇÄíÖãü
NÁVOD K POUŽITÍ
(Year) . . . . . . .
S/N° . . . . . . . . . . . . . . . .
2
NAVODILA ZA UPORABO
M O W I N G A H E A D
71503842/0
Manufactured by:
GGP ITALY SPA - Via del Lavoro, 6 - 31033 Castelfranco Veneto (TV) - ITALY
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
GB
GB
space where dangerous carbon monoxide
fumes can collect.
2) Mow only in daylight or good artificial light.
3) If possible, avoid operating the equipment in
wet grass.
SAFETY REGULATIONS
A) TRAINING
4) Always be sure of your footing on slopes.
5) Walk, never run and do not allow yourself to
be pulled along by the lawnmower.
6) Mow across the face of slopes, never up and
down.
1) Read the instructions carefully. Get familiar
with the controls and proper use of the equip-
ment. Learn how to stop the engine quickly.
2) Only use the lawnmower for the purpose for
which it was designed, i.e. for cutting grass. Any
other use can be hazardous, causing damage to
the machine.
7) Exercise extreme caution when changing
direction on slopes.
8) Do not mow on slopes of more than 20°.
9) Exercise extreme caution when pulling the
lawnmower towards you.
3) Never allow children or people unfamiliar with
these instructions to use the lawnmower. Local
regulations may restrict the age of the operator.
4) Never use the lawnmower:
10) Stop the blade if the lawnmower has to be
tilted for transportation when crossing surfaces
other than grass, and when transporting the
lawnmower to and from the area to be mowed.
11) Never operate the lawnmower with defec-
tive guards.
– When people, especially children, or pets are
nearby.
– If the operator has taken medicine or sub-
stances that can affect his ability to react and
concentrate.
12) Do not change the engine governor settings
or overspeed the engine.
5) Remember that the operator or user is
responsible for accidents or hazards occurring
to other people or their property.
13) On power-driven models, disengage the
drive clutch before starting the engine.
14) Start the engine carefully, following the
instructions and keeping feet well away from
the blade.
B) PREPARATION
15) Do not tilt the lawnmower when starting the
engine. Start the engine on a flat surface that is
free of obstacles and tall grass.
1) While mowing, always wear sturdy footwear
and long trousers. Do not operate the equip-
ment when barefoot or wearing open sandals.
2) Thoroughly inspect the area where the equip-
ment is to be used and remove all objects which
may be thrown by the machine or damage the
cutter assembly and the engine (stones, sticks,
metal wire, bones, etc.)
16) Do not put hands or feet near or under rotat-
ing parts.
17) Never pick up or carry a lawnmower while
the engine is running.
18) Stop the engine and disconnect the spark
plug wire:
3) WARNING: DANGER! Engine fuel is highly
flammable:
– Before carrying out any work underneath the
cutting deck;
– Store fuel in containers specifically designed
for this purpose.
– Before checking, cleaning or working on
lawnmower;
– Refuel using a funnel and outdoors only. Do
not smoke while refuelling or whenever han-
dling the fuel.
– After striking a foreign object. Inspect the
lawnmower for damage and make repairs
before restarting and operating the lawnmower;
– If the lawnmower starts to vibrate abnormal-
ly (find and remove the cause of the vibration
immediately).
– Add fuel before starting the engine. Never
remove the cap of the fuel tank or add fuel while
the engine is running or when the engine is hot.
– If fuel is spilled, do not attempt to start the
engine but move the machine away from the
area of spillage and avoid creating any source
of ignition until the fuel has evaporated and the
vapour dispersed.
19) Stop the engine:
– Whenever you leave the lawnmower unat-
tended. Remove the key from models with elec-
tric starters.
– Before refuelling.
– Replace all fuel tanks and containers caps
securely.
4) Substitute faulty silencers.
5) Before use, always inspect the machine,
especially the condition of the blades, and
check that the screws and cutting assembly are
not worn or damaged. Replace worn or dam-
aged blades and screws in sets to preserve bal-
ance.
– Before adjusting the cutting heigh.
20) Reduce the throttle before turning off the
engine and turn the fuel off when you have fin-
ished mowing, following the instructions in the
engine handbook.
21) When mowing, always keep to a safe dis-
tance from the rotating blade. This distance is
the length of the handle.
D) MAINTENANCE AND STORAGE
C) OPERATION
1) Keep all nuts, bolts and screws tight to be
sure the equipment is in safe working condition.
1) Do not operate the engine in a confined
Download from Www.Somanuals.com. All Manuals Search And Download.
31
ENGLISH
GB
GB
Regular maintenance is essential for safety and
performance.
2) Never store the equipment with fuel in the
tank inside a building where vapour may reach
a flame or a spark or a source of extreme heat.
3) Allow the engine to cool before storing in an
enclosed space.
•
•
Clean the air filter according to the directions.
When, after many years of service, your
machine needs to be replaced or is no longer
required, we recommended that the machine is
returned to your distributor for recycling.
4) To reduce the fire hazard, keep the engine,
exhaust silencer, battery compartment and fuel
storage area free of grass, leaves, or excessive
grease. Do not leave containers with grass cut-
tings in rooms.
5) If the fuel tank has to be drained, this should
be done outdoors and when the engine is cool.
6) Wear strong work gloves when removing and
reassembling the blade.
7) Check the blade’s balance after sharpening.
8) For reasons of safety, do not use the equip-
ment with worn or damaged parts. Parts are to
be replaced and not repaired. Use genuine
spare parts (blades should always bear the
PRODUCT IDENTITY
The identity of the product is determined by the
article and serial numbers of the machine.
These can be found on the label fixed to the chas-
sis of the machine:
symbol
). Parts that are not of the same qual-
ity can damage the equipment and be danger-
ous for your safety.
ART. NR
➔
SERIE NR.
9) Whenever the machine is to be handled,
transported or tilted you must:
– wear strong working gloves;
– grasp the machine at the points that offer a
safe grip, taking account of the weight and its
distribution.
Use this identification whenever you contact a
service workshop or buy replacement parts.
As soon as possible after buying the machine,
write the above numbers on the back page of this
booklet.
THE ENVIRONMENT
The manufacturer reserves the right to make
changes to the product without prior notice.
In order to protect the environment, we recom-
mend that the following points should be given
special consideration:
•
•
Always use pure unleaded petrol.
Always use a funnel and/or a petrol can with a
level control to avoid spillage when refilling the
fuel tank.
•
•
Do not fill the fuel tank completely.
Do not overfill with engine and/or transmission
oil.
When changing the oil, ensure that all the used
oil is collected. Avoid spillage. Take the used oil
to a recycling unit.
Do not dispose of used oil filter in a rubbish bin.
Take it to a recycming unit.
Do not dispose of used lead-acid batteries in a
rubbish bin. Take them to a battery collection
point for recycling (applies to battery-powered
machines and machines with battery start).
Replace the silencer if faulty. When carrying out
repairs, always use original spare parts.
If the machines was originally equipped with a
catalyser which is now faulty, a new one must
be fitted when the silencer is replaced.
Always seek professional help when the carbu-
rettor requires adjustment.
•
•
•
•
•
•
Download from Www.Somanuals.com. All Manuals Search And Download.
32
ENGLISH
GB
GB
HANDLE, LOWER PART
IMPORTANT
Fold back and screw tight the lower part of the
handle using the screws A (fig. 2).
For the instructions relative to the engine and
the battery, please read the relevant instruction
handbooks.
Equipment which is marked with an asterisk (*)
comes as standard in certain models or countries.
Certain models do not have throttle control. The
engine’s speed is set for optimal function and min-
imal exhaust emissions.
HANDLE, UPPER PART
Fit the upper part of the handlebar (fig. 3). The
height of the handlebar above the ground can be
adjusted within certain limits since the lower part is
provided with slotted holes at the rear (fig. 4).
If necessary the upper part can be turned to one
side to facilitate mowing close up to walls (fig. 5).
SYMBOLS
The following symbols can be found on the
machine to remind you of the care and attention
that are required during use.
CABLE HOLDER
Secure the cables in the cable holders (fig. 6):
The symbols mean:
D: Start/Stop cable + Throttle cable (*)
E: Clutch cable (*) + Electric cable (*)
Important: Read the instruction handbook
before using the
BATTERY (*)
The electrolyte in the battery is toxic and
corrosive. It can cause serious corrosion
damage etc. Avoid all contact with skin,
eyes and clothing.
Warning! Keep onlookers away. Beware of
objects being flung out.
Before starting for the first time the battery should
be charged for 24 hours, see further information
under the heading MAINTENANCE, BATTERY.
Insert ignition key (*) into the ignition lock.
Warning! Keep hands and feet clear of the
cutting deck when the machine is running.
Warning! Before starting any repair work,
remove the spark plug cable from the spark
plug.
USING THE MOWER
Warning! Always tilt the lawnmower
backwards when cleaning the
STARTING THE ENGINE
underside. Petrol and oil can run out
if the lawnmower is tilted in the other direction.
1. Place the lawnmower on flat, firm ground. Do
not start in long grass.
2. Make sure the spark plug cable is connected to
the spark plug.
3. Set the clutch control M to
(fig. 7).
INSTALLATION
4. Press in the Start/Stop loop G towards the han-
dle. NOTE! The Start/Stop loop G must be kept
pressed in to prevent the engine stopping (fig.
8).
HANDLE/BUMPER (*)
Press in the end plugs in the openings on the han-
dle. Place the handle on the cover so that the holes
in the handle are aligned with the holes in the cover.
5a Manual start: Grasp the starter handle and start
the engine by pulling briskly on the starter cord.
Thread through the carriage bolts from underneath
and secure with the locking nuts U. Press on the
nut caps V (fig 1).
5b Electric start (K*): Start the engine by turning
the ignition key clockwise. Release the key as
soon as the engine starts. Always make short
Download from Www.Somanuals.com. All Manuals Search And Download.
33
ENGLISH
GB
GB
attempts at starting in order to prevent dis-
charging the battery.
best MULCHING effect:
1. Use a high engine speed (full throttle).
2. Do not mow when the grass is wet.
6. For the best mowing results, the engine should
always be driven at full throttle.
3. Do not cut the grass too short. Not more than
1/3rd of the length should be cut off.
4. Ensure that the area under the mower casing is
always kept clean.
STOPPING THE ENGINE
5. Always use a well-sharpened blade.
The engine may be very warm immedi-
ately after it is shut off. Do not touch the
silencer, cylinder or cooling flanges. This
can cause burn injuries.
CUTTING HEIGHT
Type I
Do not set the cutting height so low that
the blade(s) come into contact with
uneven ground.
Release the Start/Stop loop G (fig. 8) to stop the
engine.
The mower has single-lever control for adjusting
the cutting height. Pull the lever out, and set the
cutting height to one of the nine positions best
suited to your lawn (fig. 9).
Type II
Release the Start/Stop loop G (fig. 7) to stop the
engine.
Disengage the drive. Set the clutch control M to
(fig. 7).
MAINTENANCE
If the start/stop loop ceases to work,
stop the engine by removing the spark
plug cable from the spark plug.
Immediately take the lawn mower to an
authorised workshop for repair.
IMPORTANT – Regular, careful maintenance is
essential for keeping the safety level and origi-
nal performance of the machine unchanged in
time.
Wear strong working gloves during any cleaning,
maintenance or adjustment operation on the
machine.
REAR WHEEL DRIVE (*)
Type I
Should it be necessary to access the lower part,
only tilt the machine from the side shown in the
engine handbook; following the relative instruc-
tions.
Engage the drive by pressing the clutch loop J
towards the handle. Disengage the drive by releas-
ing the clutch loop J (fig. 8).
CLEANING
Carefully clean the machines with water after each
cut; remove the grass debris and mud accumulat-
ed inside the chassis to avoid their drying and thus
making the next start-up difficult.
Type II
Engage the drive by moving the clutch control M to
(fig. 7). Make sure the clutch control is always
moved fully either to one or the other position.
The paintwork on the inside of the chassis may
peel off in time due to the abrasive action of the cut
grass; in this case, intervene promptly by touching
up the paintwork using a rustproof paint to prevent
the formation of rust that would lead to corrosion of
the metal.
MOWING TIPS
Before mowing the lawn, take care to remove any
stones, toys and other hard objects.
Remove the transmission casing by removing the
screws S (fig. 10) and clean around the transmis-
sion (*) and drive belts (*) with a brush or com-
pressed air once or twice a year.
A machine with the MULCHING system cuts the
grass, chops it finely and then blows it down into
the lawn.
Once every season, the drive wheels (*) should be
cleaned internally. Remove both wheels. Clean the
gear wheel and the wheel gear rim of grass and dirt
using a brush or compressed air (fig. 11).
The grass clippings need not be collected.
The following rules should be observed to give the
Download from Www.Somanuals.com. All Manuals Search And Download.
34
ENGLISH
GB
GB
LUBRICATING DRIVE SHAFT (*)
when pushing the lawnmower. With the clutch
loop fully pressed in (position 2) it should not be
possible to push the mower. Unscrew the nipple
T until this position is achieved.
Once per season, the wedge on the drive shaft
should be greased. Remove the wheel (wheel cap,
screw and washer). Then remove the circlip and
washer so that the gear wheel can be removed
from the shaft. Lubricate the wedge with universal
grease.
Type II
Check the clutch function (fig. 16):
Reinstall the wedge (the wedge is installed differ-
ently on the right and left side, fig. 12-13). Install
the gear wheel so that the «L» faces out on the left
side and the «R» faces out on the right side
(machine viewed from the rear).
1. Push the mower forwards and backwards with
disengaged transmission.
2. Set the clutch control to the
position and
push the mower until the front wheels engage.
3. In this position, the spring H should be extend-
ed 6 mm from it’s unloaded position to provide
sufficient locking force in the transmission.
4. If the spring is not extended sufficiently, adjust
the wire nipple I at the handlebar.
BATTERY (*)
In normal use during the season, the battery is
charged by the engine. If the engine cannot be
started with the ignition key, it may be because the
battery is 'dead'.
5. First loosen the locking nut S and then adjust
the nipple I.
6. Set the clutch control to the
position and
check that the transmission is disengaged by
rolling the mower forwards and backwards.
Connect the battery charger (provided) to the bat-
tery, then connect the charger to a wall socket and
charge for 24 hours (fig. 14).
ADJUSTING DRIVE BELT (*)
The battery charger may not be connected directly
to the engine terminal. It is not possible to start the
engine with the charger as the power source and
the charger could be damaged.
Check the belt tension regularly. The drive belt is
correctly adjusted when the shoulder bolt K is cen-
tred in the front hole on the engine bracket (fig. 17).
Incorrect belt tension can bring about abnormal
vibrations in the handle (the belt is tensioned too
tightly) or the belt can start to slide (the belt is not
tensioned enough).
WINTER STORAGE
Remove the battery and store it fully charged (see
above) in a dry, cool place (between 0°C and
+15°C). At least once during the winter storage
period, the battery should be maintenance-
charged.
Adjust the drive belt as follows (fig. 17):
Stop the engine and remove the spark plug cable
from the spark plug.
Before the start of the season, the battery should
be charged once again for 24 hours.
Dismantle the transmission casing. Undo the screw
L. Pull the transmission forwards so that the belt is
tensioned and tighten the screw L.
The drive belt must be adjusted so that the shoul-
der bolt K is centred in the front hole on the engine
bracket.
ADJUSTING CLUTCH CABLE (*)
Type I
If the drive does not engage when the clutch loop
is pressed against the handle, or if the lawnmower
feels cumbersome or slow, this may be because
the clutch in the transmission is slipping. To rectify
this situation, adjust the clutch cable as follows
(with the engine off):
SHOCK-ABSORBER
Fig. 18. Check the shock-absorber and the insulat-
ing sleeves twice per season. Replace in the event
of damage or wear.
1. When the clutch loop is released, it should be
possible to push the mower backwards without
any resistance. If this is not the case, screw in
the nipple T until the mower can be pushed (fig.
15).
CHANGING BLADES
To replace the blade, undo the screw (fig. 19-20).
Fit the new blade so that the stamped logo is
turned up facing the blade holder (not facing the
grass).
2. When the clutch loop is pressed in approx. 2 cm
(position 1), there should be some resistance
Download from Www.Somanuals.com. All Manuals Search And Download.
35
ENGLISH
GB
GB
Reinstall as illustrated. Tighten the screw properly.
Tightening torque 40 Nm.
When replacing the blade, the blade screw should
also be replaced.
SHARPENING THE BLADES
Sharpening of the blades must be done by wet
method grinding, using a whetstone or a grind-
stone.
For safety reasons, the blades should not be
sharpened on an emery wheel. A very high temper-
ature could cause the blades to become brittle.
STORAGE
The same petrol must not remain in the tank for
more than one month.
Thoroughly clean the mower and store it indoors in
a dry place.
SERVICING
Genuine spare parts are supplied by service work-
shops and by many dealers.
We recommend that you take the machine to an
authorised service station for annual servicing,
maintenance and inspection of safety equipment.
For service and spare parts, please contact the
dealer where the machine was purchased.
Download from Www.Somanuals.com. All Manuals Search And Download.
36
|