Snapper Lawn Mower RLW359T User Manual

Parts Manual for  
19" LIGHT WEIGHT (STANDARD & OPP)  
WALK BEHIND MOWERS  
SERIES 9  
MODEL  
DLW359T  
DLW409R2  
LW359T  
LW359T2  
ODLW309T  
RLW359T  
McDonough, GA, 30253 U.S.A.  
COPYRIGHT © 2005  
SNAPPER PRODUCTS, INC.  
ALL RIGHTS RESERVED.  
Manual No. 7006039  
TP 400-5096-1-WB-N  
Revision 1, 9/16/2005  
Table Of Contents  
PAGE  
4
GROUP  
Handles & Controls  
Cutting Deck, Blade, Interlock  
Cutting Deck, Blade, Interlock (OPP Models Only)  
Wheels, Guards, Axles  
6
8
10  
12  
14  
16  
18  
20  
22  
Wheels, Guards, Axles (OPP Models Only)  
Decals  
Accessory - Grass Bag  
Accessory - Side Chute, Adapter  
Accessory - Recycling Kits  
Accessory - Snapperizer  
19" LIGHT WEIGHT (STANDARD & OPP)  
SERIES 9  
Manual No. 7006039  
TP 400-5096-1-WB-N  
3
Handles & Controls  
Manual No. 7006039  
TP 400-5096-1-WB-N  
19" LIGHT WEIGHT (STANDARD & OPP)  
SERIES 9  
4
Handles & Controls  
Item Part No  
Qty Description  
Note  
1
2
7074384  
7033477  
HANDLE, Upper  
HANDLE, Upper  
Was 33473  
Was 33474 (For OPP Models  
Only)  
7036350  
7033406  
7033985  
7033986  
7017072  
7033904  
7022379  
7024143  
7027475  
7014343  
7023813  
7022550  
7024140  
7090095  
7016544  
7023735  
7091013  
7024088  
7090898  
7090799  
7091601  
7091022  
7090053  
7090391  
HANDLE, Middle  
HANDLE, Middle  
(For OPP Models Only)  
Was 38469  
3
4
5
6
7
HANDLE, Lower Left Hand  
HANDLE, Lower Right Hand  
CONTROL, Blade  
Was 38468  
CLIP, Blade Control  
Was 32829  
Was 24146  
CABLE, Blade Control (Tecumseh 4-Cycle)  
CABLE, Blade Control (Tecumseh 2-Cycle)  
CABLE, Blade Control (Robin 2-Cycle)  
BUSHING  
8
9
CLIP, Wiring Harness  
10  
CONTROL, Throttle (Tecumseh)  
CONTROL, Throttle (Robin)  
NUT, 1/4-28 Hex  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
Was 91024  
2
4
4
PLUG  
(For OPP Models Only)  
KNOB, 5/16-18  
SCREW, 5/16-18 x 2" Curved Head  
DECAL, Blade Control  
SCREW, #10-32 x 5/16" Sems  
BOLT, 5/16-18 x 5/8" Short Neck Carriage  
NUT, 5/16-18 Hex Flange Lock  
SCREW, 1/4-28 x 1-3/4" Hex Head Cap  
WASHER, 1/4 Internal Tooth Lock  
WASHER, 5/16 Internal Tooth Lock  
4
4
Was 91026  
Was 91070  
Was 91023  
Was 91068  
Footnotes:  
19" LIGHT WEIGHT (STANDARD & OPP)  
SERIES 9  
Manual No. 7006039  
TP 400-5096-1-WB-N  
5
Cutting Deck, Blade, Interlock  
Manual No. 7006039  
TP 400-5096-1-WB-N  
19" LIGHT WEIGHT (STANDARD & OPP)  
SERIES 9  
6
Cutting Deck, Blade, Interlock  
Item Part No  
Qty Description  
Note  
1
7057662  
DECK, Mower  
Was 47972 (Includes painted  
deck with decals)  
2
7019795  
7017167  
7090167  
7012063  
7010783  
7012927  
7015626  
7033408  
7012048  
7090385  
7090379  
7090071  
7091584  
7090595  
7091601  
7011762  
7090324  
BLADE, Cutter  
BLADE, Cutter  
(For Recycling Models Only)  
3
4
5
6
SCREW, 3/8-24 x 2" Hex Head Cap (Gr. 5)  
WASHER, Cone  
KEY, Hi-Pro (Tecumseh 2-Cycle)  
HUB, Blade Drive (Tecumseh 2-Cycle)  
HUB, Drive Blade (Tecumseh 4-Cycle & Robin 2-Cycle)  
SPRING, Interlock  
7
8
INSULATOR, Interlock  
9
WASHER, #8 Tab  
10  
11  
12  
13  
14  
15  
16  
SCREW, #8-18 x 3/4" Self-Tapping  
SCREW, 1/4-20 x 3/4" Hex Flange Lock  
NUT, 1/4-20 Hex Flange  
2
3
3
Was 90583  
BOLT, 5/16-18 x 3/4" Hex Flange Lock  
NUT, 5/16-18 Hex Flange Lock  
COVER, Spark Plug  
Was 90585  
(Not Shown)  
2
SCREW, 3/8-16 x 1" Self-Tapping  
Footnotes:  
19" LIGHT WEIGHT (STANDARD & OPP)  
SERIES 9  
Manual No. 7006039  
TP 400-5096-1-WB-N  
7
Cutting Deck, Blade, Interlock (OPP Models Only)  
Manual No. 7006039  
19" LIGHT WEIGHT (STANDARD & OPP)  
SERIES 9  
TP 400-5096-1-WB-N  
8
Cutting Deck, Blade, Interlock (OPP Models Only)  
Item Part No  
Qty Description  
Note  
1
7057662  
DECK, Mower  
Was 52502 (Includes painted  
deck with decals)  
2
3
7022396  
7090167  
7012063  
7022390  
7033408  
7012048  
7090385  
7090379  
7090071  
7091584  
7090324  
7011762  
BLADE, Cutter  
SCREW, 3/8-24 x 2" Hex Head Cap (Gr. 5)  
4
WASHER, Cone  
5
HUB, Blade Drive (Tecumseh 2-Cycle)  
SPRING, Interlock  
6
7
INSULATOR, Interlock  
8
WASHER, #8 Tab  
9
SCREW, #8-18 x 3/4" Self-Tapping  
SCREW, 1/4-20 x 1/2" Hex Head Cap  
NUT, 1/4-20 Hex Flange  
SCREW, 3/8-16 x 1" Self-Tapping  
COVER, Spark Plug  
10  
11  
12  
13  
2
2
3
Was 91145  
Was 91065  
(Not Shown)  
Footnotes:  
19" LIGHT WEIGHT (STANDARD & OPP)  
SERIES 9  
Manual No. 7006039  
TP 400-5096-1-WB-N  
9
Wheels, Guards, Axles  
Manual No. 7006039  
TP 400-5096-1-WB-N  
19" LIGHT WEIGHT (STANDARD & OPP)  
SERIES 9  
10  
Wheels, Guards, Axles  
Item Part No  
Qty Description  
Note  
1
2
7022259  
7013024  
7013320  
7013307  
7090122  
7034357  
7022260  
7032118  
7013027  
7018444  
7017829  
2
4
WHEEL, Front 7 x 1.75  
HUB-CAP, Wheel  
3
BUSHING, Height Adjustment  
SPRING, Front Axle  
WASHER, 3/8" Flat  
AXLE, 3/8 x 19-3/8"  
WHEEL, Rear 8 x 2.00  
CLIP, Rear Guard  
4
5
6
2
2
2
2
6
Was 37946  
7
8
9
SPRING, Rear Guard  
GUARD, Rear Foot  
PLUG, Wheel  
10  
11  
4
Footnotes:  
19" LIGHT WEIGHT (STANDARD & OPP)  
SERIES 9  
Manual No. 7006039  
TP 400-5096-1-WB-N  
11  
Wheels, Guards, Axles (OPP Models Only)  
Manual No. 7006039  
TP 400-5096-1-WB-N  
19" LIGHT WEIGHT (STANDARD & OPP)  
SERIES 9  
12  
Wheels, Guards, Axles (OPP Models Only)  
Item Part No  
Qty Description  
WHEEL, Front 7 x 1.75 (2)  
Note  
1
2
7022795  
7022374  
7024280  
7024086  
7090913  
7091142  
7091149  
7012309  
7022376  
7091150  
WHEEL, Rear 8 x 2.00 (2)  
GUARD, Rear Foot  
3
4
SUPPORT, Foot Guard  
5
2
4
8
4
4
SCREW, #10-24 x 1/2" Hex Washer Self-Tap (Torx)  
SCREW, 3/8-16 x 3-1/8" Hex Head Cap  
WASHER, 3/8" Flat  
6
7
8
BUSHING, Axle  
Was 22375  
9
BUSHING, Height Adjustment  
NUT, 3/8-16 Hex Center Lock  
10  
Footnotes:  
19" LIGHT WEIGHT (STANDARD & OPP)  
SERIES 9  
Manual No. 7006039  
TP 400-5096-1-WB-N  
13  
Decals  
Manual No. 7006039  
TP 400-5096-1-WB-N  
19" LIGHT WEIGHT (STANDARD & OPP)  
SERIES 9  
14  
Decals  
Item Part No  
Qty Description  
DECAL, Mulching Chamber/Foot Probe  
Note  
1
2
3
4
5
6
7
7024263  
7024088  
7013312  
7013010  
7024220  
7024169  
7024214  
DECAL, Blade Control  
DECAL, Caution  
DECAL, Danger  
DECAL, SNAPPER  
DECAL, Hi-Vac/Foot Probe  
DECAL, SNAPPER (Recycling)  
Footnotes:  
19" LIGHT WEIGHT (STANDARD & OPP)  
SERIES 9  
Manual No. 7006039  
TP 400-5096-1-WB-N  
15  
Accessory - Grass Bag  
Manual No. 7006039  
TP 400-5096-1-WB-N  
19" LIGHT WEIGHT (STANDARD & OPP)  
SERIES 9  
16  
Accessory - Grass Bag  
Item Part No  
Qty Description  
Note  
7061918  
7059322  
KIT, Grass Bag  
Was 60934 (Includes 1 thru 5)  
Was 60932 (Includes 1 thru 4)  
Was 51899  
KIT, Grass Bag  
1
2
3
4
5
7059322  
7017069  
7051906  
7042489  
7016050  
ASSEMBLY, Grass Bag (Door Type)  
BAG, KWIK-N-EZY  
ASSEMBLY, Bag Wire  
CONNECTOR, Grass Bag  
ADAPTER, Bag  
Was 47969  
Footnotes:  
19" LIGHT WEIGHT (STANDARD & OPP)  
SERIES 9  
Manual No. 7006039  
TP 400-5096-1-WB-N  
17  
Accessory - Side Chute, Adapter  
Manual No. 7006039  
TP 400-5096-1-WB-N  
19" LIGHT WEIGHT (STANDARD & OPP)  
SERIES 9  
18  
Accessory - Side Chute, Adapter  
Item Part No  
Qty Description  
Note  
1
2
3
4
5
6
7053681  
7035771  
7090799  
7024085  
7011791  
7091076  
ADAPTER, Bag  
CHUTE, Side  
Was 16088  
Was 60956  
Was 91026  
3
3
3
3
BOLT, 5/16-18 x 5/8" Short Neck Carriage  
NUT, 5/16-18 Wing  
RETAINER, 5/16 Bolt  
WASHER, 5/16 Flat  
Footnotes:  
19" LIGHT WEIGHT (STANDARD & OPP)  
SERIES 9  
Manual No. 7006039  
TP 400-5096-1-WB-N  
19  
Accessory - Recycling Kits  
Manual No. 7006039  
TP 400-5096-1-WB-N  
19" LIGHT WEIGHT (STANDARD & OPP)  
SERIES 9  
20  
Accessory - Recycling Kits  
Item Part No  
Qty Description  
Note  
7061029  
KIT, Recycling Cover  
(Includes items 1 thru 4)  
1
2
3
4
7017167  
7017169  
7090167  
7012063  
7061033  
7017167  
7016814  
7090167  
7012063  
BLADE, 19" Recycling  
COVER  
SCREW, 3/8-24 x 2" Hex Head Cap (Gr. 5)  
WASHER, Cone  
KIT, Recycling Plug  
(Includes items 1 thru 4)  
1
2
3
4
BLADE, 19" Recycling  
PLUG, Chute Adapter  
SCREW, 3/8-24 x 2" Hex Head Cap (Gr. 5)  
WASHER, Cone  
Footnotes:  
This Kit is used on Side Discharge Models.  
This Kit is used on models with grass bags.  
19" LIGHT WEIGHT (STANDARD & OPP)  
SERIES 9  
Manual No. 7006039  
TP 400-5096-1-WB-N  
21  
Accessory - Snapperizer  
Manual No. 7006039  
TP 400-5096-1-WB-N  
19" LIGHT WEIGHT (STANDARD & OPP)  
SERIES 9  
22  
Accessory - Snapperizer  
Item Part No  
Qty Description  
Note  
7060450  
KIT, Snapperizer  
(Includes items 1 thru 5)  
1
2
3
4
5
7051246  
7039762  
7091297  
7090187  
7012587  
ASSEMBLY, Screen Fastener  
RING, Bottom  
3
3
3
NUT, 5/16-24 Hex  
WASHER, 5/16 Split Lock  
SPRING  
Was 90223  
Footnotes:  
19" LIGHT WEIGHT (STANDARD & OPP)  
SERIES 9  
Manual No. 7006039  
TP 400-5096-1-WB-N  
23  
Parts Manual for  
19" LIGHT WEIGHT (STANDARD & OPP)  
WALK BEHIND MOWERS  
SERIES 9  
IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS  
WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE  
RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS  
AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE  
SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY.  
McDonough, GA, 30253 U.S.A.  
COPYRIGHT © 2005  
SNAPPER PRODUCTS, INC.  
Manual No. 7006039  
ALL RIGHTS RESERVED.  
Revision 1, 9/16/2005  
TP 400-5096-1-WB-N  

Billy Goat Lawn Mower HP3400 page
Black Decker Lawn Sweeper NSW18 User Manual
Bolens Lawn Mower 111 436R000 User Manual
Bolens Lawn Mower 149 813 000 User Manual
Cub Cadet Lawn Mower LT 2138 User Guide
Snapper Lawn Mower 150Z ZTR Series User Guide
Snapper Lawn Mower P 10603 User Manual
Snapper Lawn Mower W36120 User Manual
Swisher Lawn Mower POL 10550 User Guide
Tiger Lawn Mower Accessory FLX10 User Guide