Parts
Manual
Fast-Vac
Grass Collection Systems
Models:
5100857
5600002
5600003
5600004
5600057
5600148
Description:
3-Bag Dump From Seat
2-Bag Collection System (S150X - 48" Mower Deck)
3-Bag Collection System (S150X - 48" Mower Deck)
3-Bag Collection System (S150X S/N: 2012628762 & Below - 52" Mower Deck)
3-Bag Collection System (S200X - 61" Mower Deck)
3-Bag Collection System (S150X S/N: 2012628763 & Above - 52" Mower Deck)
Briggs and Stratton Yard Power Products Group
5375 North Main Street
Munnsville, NY 13409 USA
800-933-6175
5101356
Revision 00
Rev. Date:
10/2007
TP 400-7356-00-AT-SP
Table Of Contents
MODEL COMPONENTS
PAGE
Blower Group .....................................................................................................................................................................
Blower Mount & Drive Group .............................................................................................................................................
2-Bag Catcher & Cover Group ...........................................................................................................................................
3-Bag Catcher & Cover Group ...........................................................................................................................................
3-Bag Dump From Seat .....................................................................................................................................................
Weight Mount Group .........................................................................................................................................................
Decals - Brand, Safety & Information .................................................................................................................................
Bagger Mount Group .........................................................................................................................................................
Model Reference Sheet 1 - Models w/Rubber Discharge chute ........................................................................................
Model Reference Sheet 2 - Models w/Rubber Discharge chute ........................................................................................
4
6
8
10
12
14
16
18
20
21
Torque Specification Chart ............................................................................................. Inside Back Cover
Blower Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5600148 (S150X S/N: 2012628763 & Above - 52" Mower Deck)
5600057 (S200X - 61" Mower Deck)
5600004 (S150X S/N: 2012628762 & Below - 52" Mower Deck)
5600003 (S150X - 48" Mower Deck)
5600002 (S150X - 48" Mower Deck)
© Copyright 2007 Briggs and Stratton. All Rights Reserved.
4
TP 400-7356-00-AT-SP
Blower Group
REF NO PART NO.
QTY.
1
DESCRIPTION
BLOWER HOUSING
1
2
5403723A
5403750A
5403754A
7100021
1
BACK PLATE
3
1
BLOWER IMPELLER
4
2
BEARING, FLANGE, 1" Bore
BOLT, 5/16-18 X 3/4" Self Tap
BELT GUARD
5
7091541
5
6
5403736A
5021097
1
7
1
PULLEY, IDLER V-NOTCH, 5"
IDLER PULLEY ASSEMBLY
BELT KEEPER
8
3043613
2
9
5403749A
5403740A
5025156
2
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
1
KEEPER, BELT TENSIONER
WASHER 3/8" SAE
2
5025013X16
5025017X18
5025056
2
BOLT, 3/8-16 X 2
1
BOLT, 1/2-13 X 2-1/4
1
NUT, 1/2-13 Hex Nylon Lock
NUT, 3/8-16 Hex Large Serrated Flange
BOLT, 5/16-18 X 1-1/4
U-CLIP, 5/16-18
5025394
4
5025011X10
5022308
1
3
7091811
6
BOLT, 5/16-18 X 5/8" Self Lock
CARRIAGE BOLT, 5/16-18 X 3/4
NUT, 5/16-18 Hex Nylock Flange
RETAINING RING, 1/2"
FLANGE BEARING, 9/16"
IDLER STUD
5025145X6
5025392
6
6
7010776
1
7014409
2
7044995
1
7091804
2
FLAT WASHER, 9/16" Narrow
IDLER ARM
5403746
1
5025171
1
WASHER, 3/8 Lock
5025035
1
NUT, 3/8-24 Hex
5020807
1
SPRING, Extension
7091575
1
NUT, 5/16-18 Hex Center Lock
BOLT, 3/8-16 X 6" GD5
5025013X48
1
Footnotes
The above parts group applies to the following Mfg. Nos.:
5600148 (S150X S/N: 2012628763 & Above - 52" Mower Deck)
5600057 (S200X - 61" Mower Deck)
5600004 (S150X S/N: 2012628762 & Below - 52" Mower Deck)
5600003 (S150X - 48" Mower Deck)
5600002 (S150X - 48" Mower Deck)
© Copyright 2007 Briggs and Stratton. All Rights Reserved.
5
TP 400-7356-00-AT-SP
Blower Mount & Drive Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5600003 (S150X - 48" Mower Deck)
5600004 (S150X S/N: 2012628762 & Below - 52" Mower Deck)
5600002 (S150X - 48" Mower Deck)
5600057 (S200X - 61" Mower Deck)
5600148 (S150X S/N: 2012628763 & Above - 52" Mower Deck)
© Copyright 2007 Briggs and Stratton. All Rights Reserved.
6
TP 400-7356-00-AT-SP
Blower Mount & Drive Group
REF NO PART NO.
QTY.
DESCRIPTION
1
2
-
-
BLOWER ASSEMBLY
5402380A
5100847
7091811
5025013X8
5025096
5022205
5025391
5046807
5022726
5022308
5061858A
5400007A
5022319
5023177
5021006
5403650A
1
2
6
3
3
1
1
1
1
2
1
1
2
1
1
1
WELD, BLOWER MOUNT 61 BLACK (All Models - 61" Mower Deck)
SNAPPERPIN, 5/16 X 2
3
4
BOLT, 5/16-18 X 3/4" SELF LOCK
5
BOLT, 3/8-16 X 1" GD5 YZ
6
NUT, 3/8-16 HEX NYLON LOCK
7
EYEBOLT, 1/4-20 X 2
8
NUT, 1/4-20 HEX NYLOCK FLANGE
PULLEY, BLOWER AXLE, 52 (All Models - 52" Mower Deck)
KEY 1/4 SQ X 1 1/2 LONG
9
10
11
12
13
14
15
16
17
BODY CLIP, 5/16-18 X 1/2" DEEP
GUARD, DECK - BLACK (All Models - 48" & 52" Mower Decks)
SHIELD, BELT (All Models - 48" & 52" Mower Decks)
KNOB, PLASTIC, 5/16-18 X 3/4"
PULLEY, BLOWER 52" DECK (All Models - 52" Mower Deck)
BELT, #7-6717, 88.8" E.L. (All Models - 52" Mower Deck)
WELD, BLOWER MOUNT 52 BLACK (S/N: 2012628763 & Above Models - 52"
Mower Deck)
18
19
5402633A
5402354A
1
1
WELD, BLOWER MOUNT 48 BLACK (All Models - 48" Mower Deck)
WELD, BLOWER MOUNT 52 BLACK (S/N: 2012628762 & Below Models - 52"
Mower Deck)
20
21
22
23
24
25
26
5022844
5046806
5046808
5023176
5046702
5401436A
5061858A
1
1
1
1
1
1
1
BELT, #7-6718, 92.0" E.L. (All Models - 48" & 61" Mower Decks)
PULLEY, BLOWER AXLE, 48 (All Models - 48" Mower Deck)
PULLEY, BLOWER AXLE, 61 (All Models - 61" Mower Deck)
PULLEY, BLOWER 48" DECK (All Models - 48" Mower Deck)
PULLEY, BLOWER 61" DECK (All Models - 61" Mower Deck)
SHIELD, BELT (All Models - 61" Mower Deck)
GUARD, DECK - BLACK (All Models - 61" Mower Deck)
Footnotes
The above parts group applies to the following Mfg. Nos.:
5600003 (S150X - 48" Mower Deck)
5600004 (S150X S/N: 2012628762 & Below - 52" Mower Deck)
5600002 (S150X - 48" Mower Deck)
5600057 (S200X - 61" Mower Deck)
5600148 (S150X S/N: 2012628763 & Above - 52" Mower Deck)
© Copyright 2007 Briggs and Stratton. All Rights Reserved.
7
TP 400-7356-00-AT-SP
2-Bag Catcher & Cover Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5600002 (S150X - 48" Mower Deck)
© Copyright 2007 Briggs and Stratton. All Rights Reserved.
8
TP 400-7356-00-AT-SP
2-Bag Catcher & Cover Group
REF NO PART NO.
QTY.
DESCRIPTION
2 BAG AIR DOME
1
2
5100153
5100150
5100152
5100151
5025011X6
5025155
5025170
5025056
5025018X24
5025158
5025057
5025392
5022875
5022833
5022876
5400147A
5100036A
5100730
5100729
1
2
2
1
12
8
4
3
3
2
2
4
1
1
1
1
1
2
2
CATCHER BAG W/ HANDLE
GAS CYLINDER
3
4
DETENT PIN W/ LANYARD
BOLT, 5/16-18 X 3/4" GRD5
WASHER, 5/16" SAE
WASHER, 5/16" LOCK
NUT, 1/2-13 HEX NYLON LOCK
BOLT, 1/2-20 X 3" GD5
WASHER, 1/2" SAE
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
NUT 5/16-18 HEX NYLON LOCK
NUT 5/16-18 HEX NYLOCK FLANGE
HOSE CLAMP
HOSE
HOSE CLAMP
WELD, INLET BLOWER
BAFFLE
BAG FRAME CONNECTOR, PLASTIC
BAG FRAME
Footnotes
The above parts group applies to the following Mfg. Nos.:
5600002 (S150X - 48" Mower Deck)
© Copyright 2007 Briggs and Stratton. All Rights Reserved.
9
TP 400-7356-00-AT-SP
3-Bag Catcher & Cover Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5600004 (S150X S/N: 2012628762 & Below - 52" Mower Deck)
5600148 (S150X S/N: 2012628763 & Above - 52" Mower Deck)
5600003 (S150X - 48" Mower Deck)
5600057 (S200X - 61" Mower Deck)
© Copyright 2007 Briggs and Stratton. All Rights Reserved.
10
TP 400-7356-00-AT-SP
3-Bag Catcher & Cover Group
REF NO PART NO.
QTY.
DESCRIPTION
1
2
5100154
5100150
5100152
5100151
5025011X6
5025155
5025170
5025056
5025018X24
5025158
5025057
5025392
5022875
5022833
5022876
5400145A
5400197A
5100730
5100729
1
3
3 BAG AIR DOME
CATCHER BAG W/ HANDLE
GAS CYLINDER
3
2
4
1
DETENT PIN W/ LANYARD
BOLT, 5/16-18 X 3/4" GRD5
WASHER, 5/16" SAE
5
14
10
6
6
7
WASHER, 5/16" LOCK
8
4
NUT, 1/2-13 HEX NYLON LOCK
BOLT, 1/2-20 X 3" GD5
WASHER, 1/2" SAE
9
4
10
11
12
13
14
15
16
17
18
19
2
4
NUT, 5/16-18 HEX NYLON LOCK
NUT, 5/16-18 HEX NYLOCK FLANGE
CLAMP, HOSE, UPPER
HOSE, FLEXIBLE, 7" DIA. X 58
CLAMP, HOSE, LOWER
WELD, INLET BLOWER 3-BAG BLACK
BAFFLE
4
1
1
1
1
1
1
BAG FRAME CONNECTOR, PLASTIC
BAG FRAME
1
Footnotes
The above parts group applies to the following Mfg. Nos.:
5600004 (S150X S/N: 2012628762 & Below - 52" Mower Deck)
5600148 (S150X S/N: 2012628763 & Above - 52" Mower Deck)
5600003 (S150X - 48" Mower Deck)
5600057 (S200X - 61" Mower Deck)
© Copyright 2007 Briggs and Stratton. All Rights Reserved.
11
TP 400-7356-00-AT-SP
3-Bag Dump From Seat
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5100857
© Copyright 2007 Briggs and Stratton. All Rights Reserved.
12
TP 400-7356-00-AT-SP
3-Bag Dump From Seat
REF NO PART NO.
QTY.
DESCRIPTION
MASTER LINK, LH
MASTER LINK, RH
DRIVE LINK
1
2
5100857X1
5100857X2
5100857X4
5100857X5
5100857X7
5100857X9
5100857X10
5100857X11
5100857X12
5100857X13
5100857X14
5100857X26
5100857X29
5100857X32
5100857X33
5100857X34
5100857X37
5100857X41
5100857X43
4
5
SLAVE LINK
7
TORQUE LINK ASSEMBLY
HANDLE PIVOT
9
10
11
12
13
14
26
29
32
33
34
37
41
43
LATCH ASSEMBLY, LH
LATCH ASSEMBLY, RH
TENSION SPRING
GAS SPRING
CABLE ADJUST. BLOCK
DFS WELD LEVER
RUBBER STOPPER
RUBBER GRIP
RUBBER GRIP
1/16 CABLE
1/16 CABLE TIE
FLANGE BUSHING
SHOULDER BOLT
Footnotes
The above parts group applies to the following Mfg. Nos.:
5100857
© Copyright 2007 Briggs and Stratton. All Rights Reserved.
13
TP 400-7356-00-AT-SP
Weight Mount Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5600148 (S150X S/N: 2012628763 & Above - 52" Mower Deck)
5600057 (S200X - 61" Mower Deck)
5600002 (S150X - 48" Mower Deck)
5600003 (S150X - 48" Mower Deck)
5600004 (S150X S/N: 2012628762 & Below - 52" Mower Deck)
© Copyright 2007 Briggs and Stratton. All Rights Reserved.
14
TP 400-7356-00-AT-SP
Weight Mount Group
REF NO PART NO.
QTY.
DESCRIPTION
1
2
3
4
5
6
7
5025018X10
5025158
5049082A
5025098
5049143
5025210
1717627
2
2
1
2
1
2
3
BOLT, 1/2-20 X 1-1/4" GD5 YZ
WASHER, 1/2 SAE
HOLDER ASMY - WEIGHT
NUT, 1/2-20 HEX NYLON LOCK
ROD- .500DIA 13.75LG YELLOW
PIN, HAIR
WEIGHT, 50LBS
Footnotes
The above parts group applies to the following Mfg. Nos.:
5600148 (S150X S/N: 2012628763 & Above - 52" Mower Deck)
5600057 (S200X - 61" Mower Deck)
5600002 (S150X - 48" Mower Deck)
5600003 (S150X - 48" Mower Deck)
5600004 (S150X S/N: 2012628762 & Below - 52" Mower Deck)
© Copyright 2007 Briggs and Stratton. All Rights Reserved.
15
TP 400-7356-00-AT-SP
Decals - Brand, Safety & Information
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5600004 (S150X S/N: 2012628762 & Below - 52" Mower Deck)
5600003 (S150X - 48" Mower Deck)
5600148 (S150X S/N: 2012628763 & Above - 52" Mower Deck)
5600002 (S150X - 48" Mower Deck)
5600057 (S200X - 61" Mower Deck)
© Copyright 2007 Briggs and Stratton. All Rights Reserved.
16
TP 400-7356-00-AT-SP
Decals - Brand, Safety & Information
REF NO PART NO.
QTY.
DESCRIPTION
DECAL, Fast-Vac
1
2
3
4
5
5046944
5046850
5046851
5046883
7027733
1
1
1
1
1
DECAL, Danger/Warning
DECAL, Warning-Blower
DECAL, Warning-Shield
DECAL, Ear Protection
Footnotes
The above parts group applies to the following Mfg. Nos.:
5600004 (S150X S/N: 2012628762 & Below - 52" Mower Deck)
5600003 (S150X - 48" Mower Deck)
5600148 (S150X S/N: 2012628763 & Above - 52" Mower Deck)
5600002 (S150X - 48" Mower Deck)
5600057 (S200X - 61" Mower Deck)
© Copyright 2007 Briggs and Stratton. All Rights Reserved.
17
TP 400-7356-00-AT-SP
Bagger Mount Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
5600002 (S150X - 48" Mower Deck)
5600057 (S200X - 61" Mower Deck)
5600148 (S150X S/N: 2012628763 & Above - 52" Mower Deck)
5600003 (S150X - 48" Mower Deck)
5600004 (S150X S/N: 2012628762 & Below - 52" Mower Deck)
© Copyright 2007 Briggs and Stratton. All Rights Reserved.
18
TP 400-7356-00-AT-SP
Bagger Mount Group
REF NO PART NO.
QTY.
DESCRIPTION
1
2
3
4
5
6
7
8
9
5400043A
5025394
2
WELD, MOUNT, POST
14
10
2
NUT, 3/8-16 HEX NYLOCK FLANGE
BOLT, 3/8-16 X 1" GD5 YZ
PIN, HITCH, .50 X 3.25 W/ LAY
MOUNT, TAB, BLACK
5025013X8
5100013
5400041A
5400149A
5025013X10
5025156
2
1
WELD, BAGGER MOUNT
BOLT, 3/8-16 X 1-1/4" GD5 YZ
WASHER 3/8" SAE
4
6
5022848
2
CAP, PLASTIC, 1-1/2" X 1-1/2"
Footnotes
The above parts group applies to the following Mfg. Nos.:
5600002 (S150X - 48" Mower Deck)
5600057 (S200X - 61" Mower Deck)
5600148 (S150X S/N: 2012628763 & Above - 52" Mower Deck)
5600003 (S150X - 48" Mower Deck)
5600004 (S150X S/N: 2012628762 & Below - 52" Mower Deck)
© Copyright 2007 Briggs and Stratton. All Rights Reserved.
19
TP 400-7356-00-AT-SP
Model Reference Sheet 1 - Models w/Rubber Discharge chute
356ESRF0
The above parts group applies to the following Mfg. Nos.:
5600057 (S200X - 61" Mower Deck)
5600148 (S150X S/N: 2012628763 & Above - 52" Mower Deck)
5600004 (S150X S/N: 2012628762 & Below - 52" Mower Deck)
5600003 (S150X - 48" Mower Deck)
5600002 (S150X - 48" Mower Deck)
TP 400-7356-00-AT-SP
© Copyright #NamBeriggs and Stratton. All Rights Reserved.
20
Model Reference Sheet 2 - Models w/Rubber Discharge chute
356ESRF1
The above parts group applies to the following Mfg. Nos.:
5600057 (S200X - 61" Mower Deck)
5600148 (S150X S/N: 2012628763 & Above - 52" Mower Deck)
5600004 (S150X S/N: 2012628762 & Below - 52" Mower Deck)
5600003 (S150X - 48" Mower Deck)
5600002 (S150X - 48" Mower Deck)
TP 400-7356-00-AT-SP
© Copyright #NamBeriggs and Stratton. All Rights Reserved.
21
Hardware Identification & Torque Specifications
Common Hardware Types
Torque Specification Chart
Hex Head Capscrew
FOR STANDARD MACHINE HARDWARE (Tolerance 20%)
Washer
No
Marks
Hardware
Grade
Lockwasher
Carriage Bolt
SAE Grade 2
SAE Grade 5
in/lbs
SAE Grade 8
in/lbs
Hex Nut
Size Of
in/lbs
Hardware ft/lbs
Nm.
2.1
2.3
3.1
3.5
7.6
ft/lbs
Nm.
ft/lbs
Nm.
Standard Hardware Sizing
8-32
8-36
19
20
27
31
66
76
11
12
20
23
30
35
50
55
65
30
31
43
49
8
10
17
19
30
35
50
55
3.4
3.5
4.9
41
43
60
68
12
14
25
27
45
4.6
4.9
6.8
7.7
16.3
19.0
34.0
34.0
61.2
When a washer or nut is identified as 1/2”, this is the
Nominal size, meaning the inside diameter is 1/2 inch; if a
second number is present it represent the threads per inch
10-24
10-32
1/4-20
1/4-28
5/16-18
5/16-24
3/8-16
3/8-24
7/16-14
7/16-20
1/2-13
1/2-20
9/16-12
9/16-18
5/8-11
5/8-18
3/4-10
3/4-16
7/8-9
5.5
When bolt or capscrew is identified as 1/2 - 16 x 2”, this
means the Nominal size, or body diameter is 1/2 inch; the
second number represents the threads per inch (16 in this
example, and the final number is the body length of the
bolt or screw (in this example 2 inches long).
10.9
13.6
23.1
25.8
40.8
47.6
68.0
74.8
8.6
15.0
16.3
27.2
31.3
40.8
47.6
68.0
74.8
88.4
The guides and ruler furnished below are designed to
help you select the appropriate hardware and tools.
50
70
80
68.0
95.2
0
108.8
149.6
163.2
204.0
231.2
299.2
326.4
525.0
571.2
816.0
897.6
1/4
75 102.0
90 122.4
110
110
120
150
170
220
240
386
420
600
660
Nut, 1/2”
1/2
Inside
Diameter
149.6
163.2
204.0
244.8
353.6
408.0
544.0
598.4
788.8
3/4
75 102.0
90 122.4
100
160
180
140
155
220
240
120
150
180
260
300
400
440
580
640
1
2
3
4
136
1/4
217.6
244.8
190.4
210.8
299.2
326.4
1/2
3/4
7/8-14
1-8
1-12
Screw, 1/2 x 2
900 1,244.0
Body
Diameter
870.4 1,000 1,360.0
1/4
NOTES
1/2
1. These torque values are to be used for all hardware
excluding: locknuts, self-tapping screws, thread forming
screws, sheet metal screws and socket head setscrews.
2. Recommended seating torque values for locknuts:
a. for prevailing torque locknuts - use 65% of grade 5
torques.
b. for flange whizlock nuts and screws - use 135% of
grade 5 torques.
3. Unless otherwise noted on assembly drawings, all torque
values must meet this specification.
Body
Length
3/4
1/4
1/2
3/4
Wrench & Fastener Size Guide
1/2
7/16
DIA.
DIA.
3/8
5/16
1/4
1/4” Bolt or Nut
Wrench—7/16”
5/16” Bolt or Nut
Wrench—1/2”
3/8” Bolt or Nut
Wrench—9/16”
7/16” Bolt or Nut
Wrench (Bolt)—5/8”
Wrench (Nut)—11/16”
1/2” Bolt or Nut
Wrench—3/4”
Parts
Manual
Fast-Vac
Grass Collection Systems
IT IS THE POLICY OF FERRIS INDUSTRIES TO IMPROVE ITS PRODUCTS WHENEVER IT
IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE
CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY
OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS MANUFACTURED
Briggs and Stratton Yard Power Products Group
5375 North Main Street
Munnsville, NY 13409 USA
800-933-6175
© Copyright 2007 Briggs and Stratton Corporation
All Rights Reserved. Printed In USA.
|