Husqvarna Lawn Mower Accessory 115 247227 R1 User Guide

Operator's Manual 2009-09  
Grass Catcher  
54"  
Model 966 445001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
SAfETy.....................................................................5  
OPERATION ...........................................................14  
TIPS TO ImPROVE BAGGING....................14  
GENERAL OPERATION................................5  
SLOPE OPERATION.....................................5  
CHILDREN ...................................................6  
SERVICE.......................................................6  
CUSTOmER RESPONSIBILITIES ...........................15  
GENERAL RECOmmENDATIONS..............15  
STORAGE...................................................15  
CONTAINER CONTENTS .........................................8  
ASSEmBLy ...............................................................9  
PARTS.....................................................................16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONGRATULATIONS on your purchase of a new  
Grass Catcher. It has been designed, engineered  
and manufactured to give you the best possible  
dependability and performance.  
Should you experience any problem you cannot  
easily remedy, contact the nearest authorized service  
center/ department. They have competent, well-  
trained technicians and the proper tools for service  
and repairs.  
KNOW YOUR GRASS CATCHER  
READ THIS OPERATION mANUAL AND SAfETy  
RULES BEfORE ASSEmBLING OR OPERATING  
yOUR GRASS CATCHER. Compare the illustrations  
with the carton contents to familiarize yourself  
with the parts before starting the assembly. Study  
the operating instructions and safety precautions  
thoroughly to insure proper functioning of your Grass  
Catcher and to prevent injury to yourself and others.  
Save this manual for future reference.  
Read and retain this manual. The instructions will  
enable you to assemble and maintain your collection  
system properly. Always observe the SAfETy RULES.  
The operation of any mower can result  
in foreign objects thrown into the  
eyes, which can result in severe eye  
damage. ALWAYS wear safety glasses  
or eye shields before starting your  
mower and while mowing. Standard  
safety glasses are recommended or  
a wide vision safety mask for over  
spectacles.  
WARNING!  
Engine exhaust, some of its  
constituents, and certain vehicle  
components contain or emit  
chemicals known to the State of  
California to cause cancer and birth  
defects or other reproductive harm.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY  
SAFE OPERATION PRACTICES FOR RIDE-ON MOWERS  
DANGER !  
THIS CUTTING mACHINE IS CAPABLE Of AmPUTATING HANDS AND fEET  
AND THROWING OBJECTS. fAILURE TO OBSERVE THE fOLLOWING  
SAfETy INSTRUCTIONS COULD RESULT IN SERIOUS INJURy OR DEATH.  
DO NOT operate mower with grass catcher,  
unless the front weights are installed.  
GENERAL OPERATION  
Read, understand and follow all instructions in the  
manual and on the machine before starting.  
Keep machine free of grass, leaves or other  
debris buildup which can touch hot exhaust/  
engine parts and burn. Do not allow the mower  
deck to plow leaves or other debris which can  
cause buildup to occur. Clean any oil or fuel  
spillage before operating or storing the machine.  
Allow machine to cool before storage.  
Only allow responsible adults, who are familiar  
with the instructions, to operate the machine.  
Clear the area of objects such as rocks, stones,  
toys, wire etc., which could be picked up and  
thrown by the blades.  
Be sure the area is clear of all people and pets  
before mowing. Stop the machine if anyone enters  
the area.  
SLOPE OPERATION  
Slopes are a major factor related to loss-of-control and  
tipover accidents, which can result in severe injury or  
death. All slopes require extra caution. If you cannot  
back up the slope or if you feel uneasy on it, do not  
mow it.  
Never carry passengers or children even with  
blades off.  
Do not mow in reverse unless absolutely  
necessary. Always look down and behind before  
and while backing.  
DO  
Be aware of the mower discharge direction and  
do not direct it towards anyone. Do not operate  
the mower without either the entire grass catcher  
or the guard in place.  
mow up and down slopes (10° max.), not across.  
Remove obstacles such as rocks, tree limbs, etc.  
Watch for holes, ruts, or bumps. Uneven terrain  
could overturn the machine. Tall grass can hide  
obstacles.  
Slow down before turning.  
Never leave the machine unattended when the  
engine is running. Always turn off the blades, set  
the parking brake, stop the engine and remove  
the key before leaving the machine.  
Use slow speed. Choose a low speed so that you  
will not have to stop while on the slope.  
Use extra care with grass catchers or other  
attachments. These can change the stability of  
the machine.  
Keep all movement on the slopes slow and  
gradual. Do not make sudden changes in speed  
or direction.  
Avoid starting or stopping on a slope. If tires  
lose traction, disengage the blades and proceed  
slowly straight down the slope.  
Turn off blades when not mowing.  
Stop engine before removing grass catcher or  
unclogging chute.  
mow only in daylight or good artificial light.  
Do not operate the machine while under the  
influence of alcohol or drugs.  
Watch out for traffic when operating near or  
crossing roadways.  
Use extra care when loading and unloading the  
machine onto a trailer or truck.  
Data indicates that operators, age 60 years and  
above, are involved in a large percentage of  
riding mower-related injuries. These operators  
should evaluate their ability to operate the riding  
mower safely enough to protect themselves and  
others from serious injury.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY  
SAFE OPERATION PRACTICES FOR RIDE-ON MOWERS  
DO NOT  
Use extra care in handling gasoline and other  
fuels. They are flammable and vapors are  
explosive.  
Do not turn on slopes unless necessary, and then,  
turn slowly and gradually downhill, if possible.  
- Use only an approved container.  
- Never remove gas cap or add fuel with the  
engine running.  
- Allow engine to cool before refueling.  
- Do not smoke.  
Do not mow near drop-off, ditches, or  
embankments. The mower could suddenly turn  
over if a wheel is over the edge of a cliff or ditch,  
or if an edge caves in.  
Do not mow on wet grass. Reduced traction  
could cause sliding.  
- Never refuel the machine indoors.  
Do not try to stabilize the machine by putting your  
foot on the ground.  
- Never store the machine or fuel container  
inside where there is an open flame, such as  
a water heater.  
CHILDREN  
Never run a machine inside a closed area.  
Tragic accidents can occur if the operator is not  
Keep nuts and bolts, especially blade attachment  
bolts, tight and keep equipment in good  
condition.  
Never tamper with safety devices. Check for  
proper operation regularly.  
Keep machine free of grass, leaves, or other  
debris buildup. Clean oil or fuel spillage. Allow  
machine to cool before storing.  
Stop and inspect the equipment if you strike an  
object. Repair, if necessary, before restarting.  
alert to the presence of children. Children are  
often attracted to the machine and the mowing  
activity. Never assume that children will remain  
where you last saw them.  
NEVER allow children to operate the machine.  
Keep children out of the mowing area and under  
the watchful care of another responsible adult.  
Be alert and turn off the machine if children enter  
the area.  
Before and when backing, look behind and down  
for small children.  
Never carry children. They may fall off and be  
seriously injured or interfere with safe machine  
operation.  
Use extra care when approaching blind corners,  
shrubs, trees, or other objects that may obscure  
vision.  
Never make adjustments or repairs with the  
engine running.  
Grass catcher components are subject to wear,  
damage, and deterioration, which could expose  
moving parts or allow objects to be thrown.  
frequently check components and replace  
with manufacturer’s recommended parts, when  
necessary.  
SERVICE  
mower blades are sharp and can cut. Wrap the  
blade(s) or wear gloves, and use extra caution  
when servicing them.  
Check brake operation frequently. Adjust and  
service as shown in the Operator’s manual.  
The operation of any mower can result in foreign  
objects thrown into the eyes, which can result  
in severe eye damage. Always wear safety  
glasses or eye shields while operating your  
mower or performing any adjustments or repairs.  
We recommend a wide vision safety mask over  
spectacles or standard safety glasses.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY  
SAFE OPERATION PRACTICES FOR RIDE-ON MOWERS  
NEVER allow children to operate the machine.  
Be sure the area is clear of other people before  
mowing. Stop machine if anyone enters the area.  
CAUTION  
In order to prevent accidental starting  
when setting up, transporting,  
adjusting or making repairs, always  
disconnect spark plug wire and place  
wire where it cannot contact spark  
plug.  
Never carry passengers or children even with the  
blades off.  
Do not drive in reverse unless absolutely  
necessary. Always look down and behind before  
and while backing.  
Never carry children. They may fall off and be  
seriously injured or interfere with safe machine  
operation.  
Keep children out of the mowing area and under  
the watchful care of another responsible adult.  
Be alert and turn machine off if children enter the  
area.  
Before and when backing, look behind and down  
for small children.  
WARNING  
mow up and down slopes (10° max), not across.  
Remove obstacles such as rocks, tree limbs, etc.  
Watch for holes, ruts, or bumps. Uneven terrain  
could overturn the machine. Tall grass can hide  
obstacles.  
Engine exhaust, some of its  
constituents, and certain vehicle  
components contain or emit  
chemicals known to the State of  
California to cause cancer and birth  
defects or other reproductive harm.  
Use a slow speed while on slope or hill.  
Avoid starting or stopping on a slope. If tires  
lose traction, disengage the blades and proceed  
slowly straight down the slope.  
If machine stops while going uphill, disengage  
blades, shift into reverse and back down slowly.  
Do not turn on slopes unless necessary, and then,  
turn slowly and gradually downhill, if possible.  
CAUTION  
WARNING  
Look for this symbol to point out  
important safety precautions. It  
means CAUTION! BECOME ALERT!  
YOUR SAFETY IS INVOLVED.  
Battery posts, terminals and related  
accessories contain lead and lead  
compounds, chemicals know to  
the State of California to cause  
cancer and birth defects or other  
reproductive harm. Wash hands after  
handling.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
UNPACKING INSTRUCTIONS  
CONTAINER CONTENTS  
Remove all parts and packing materials from  
3 - Soft Bag Containers 1 - Upper Chute  
carton.  
1 - Lower Chute  
1 - Cover Assembly  
1 - Catcher mount  
1 - Catcher Hitch  
1 - Cast Weight  
Hardware  
Check carton contents against list. Be sure all  
parts are there.  
TOOLS REQUIRED  
½" Wrench (2)  
9/16" Wrench  
9/16" Socket wrench  
Drill and 5/16" bit  
PARTS IDENTIFICATION  
COVER ASSEMBLY  
UPPER CHUTE  
DUMP BAG  
INDICATOR  
CHUTE LATCH  
LOWER CHUTE  
BAG  
CONTAINERS  
NOTE: When right hand (RH) and left hand (LH.) are mentioned in this manual, it means when seated  
on the mower in the operator’s position.  
CAUTION  
BEFORE ASSEMBLING GRASS CATCHER TO MOWER:  
• Place motion control levers in “NEUTRAL” position.  
• Set parking brake.  
• Turn ignition key “OFF” and remove key.  
• Make sure the blades and all moving parts have completely stopped.  
• Disconnect spark plug and place wire where it cannot come in contact with plug.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLY  
BAGGER MOUNT - 2009 Models  
BAGGER SUPPORT -2008 and Prior Models  
1
1. Install the bagger mount tube to the rear guard  
with 5/16-18 x 3¼ bolts and flange nuts from kit.  
NOTE: Depending on model, rear guard hole may  
need to be drilled out to 5/16" if kit hardware is too  
large.  
Remove rear engine guard (if installed) by removing  
the six bolts that attach the guard to the frame.  
1. Place hitch on the rear of the mower.  
Engine  
Guard  
Bolts  
Engine  
Guard  
Bolts  
2. Install kit support straps on the outside of the  
mount tube as shown in the illustration. Using  
a 5/16-18 x 1¼ bolt, attach the front side of the  
strap to the fender support. Do not add flange  
nut at this time. Place the reinforcement plate to  
the outside of the fender support. Secure with  
additional 1¼ bolt and fasten both bolts with  
flange nuts. Repeat steps on opposite side.  
Rear Engine  
Guard  
NOTE: The front side of the kit support straps  
should be on the inside of the mower frame.  
3. Tighten all hardware.  
Drill rear guard hole  
8063-045  
to 5/16" if needed  
Support Strap  
3. Install two of the previously removed bolts through  
rear of the hitch weldment.  
4. Secure the sides of the hitch to the frame with  
5/16-18 x ¾ bolts and washers from the new  
hardware, (two per each side).  
8063-044  
Mount Tube  
Reinforcement  
Plate  
8063-046  
Previously  
Hitch  
Removed  
Hardware  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLY  
INSTALLING CHUTE SUPPORT  
CONTAINER MOUNTING  
2
3
1. Position upper chute support against bagger inlet,  
flush at outer edges. See Illustration.  
Remove plastic end caps from the center two bag  
support arms. fully insert spacer plugs into the ends  
of the support tubes. It may be necessary to tap the  
spacers into place with a hammer or mallet. Replace  
the plastic end cap back over the spacer. The  
additional extension will hold the hood more securely  
when latched.  
2. Using support as a template, drill two 3/8 holes into  
bagger hood.  
Upper Chute Support  
Insert spacers and  
replace caps  
8063-047  
Bagger Inlet  
8063-049  
3. Secure upper chute support to hood with hex  
bolts, washers and nyloc nuts.  
Remove center  
end caps  
Flex Trim  
MOUNTING COVER ASSEMBLY  
4
NOTE: Assistance from another person may  
ease mounting the cover assembly to mower.  
1. Lift and rotate cover to align the cover brackets  
with support assembly tubes.  
2. Slide the cover down over the support tubes until  
secure.  
8063-048  
8063-050  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLY  
CONTAINER MOUNTING  
LOWER CHUTE INSTALLATION  
5
6
1. Install containers on supports, overlapping at  
center supports.  
1. Raise and hold deflector shield in upright position.  
2. fit lower chute as shown and hook rear latch to  
2. Close cover and lock latch handles over center  
support tubes.  
mower deck.  
3. Align the bracket slot on lower chute with the  
deflector bracket tab on the mower deck. Slide  
chute down over tab.  
4. With the lower chute in proper position, hold the  
chute securely while hooking the front latch to the  
mower deck.  
NOTE: While hooking the latches, the deflector  
shield may try to push the chute away from the  
mower deck opening. It is important to hold the  
chute in position while hooking the latches to  
the mower deck.  
Deflector  
Shield  
Deflector  
Bracket  
Tab  
Center  
Support  
Tubes  
8063-009  
WARNING  
8063-038  
DO NOT operate mower unless  
container is properly installed.  
Container is subject to wear and  
deterioration, check containers  
frequently, replace when cracked or  
damaged. Use only a recommended  
replacement container.  
Front Latch  
Rear Latch  
CAUTION  
CAUTION  
Before raising deflector shield, turn  
mower engine off. DO NOT remove  
deflector shield from mower. Raise  
and hold shield when attaching lower  
chute and allow it to rest on chute  
while in operation.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLY  
UPPER CHUTE INSTALLATION  
CHUTE / HOOD INSTALLATION  
7
8
1. Attach bungee latch assembly from kit as  
1. Push upper chute through the gasketed opening  
illustrated.  
in the cover assembly.  
2. Rotate chute so the chute opening is downwards  
toward the container bags.  
Hood Inlet  
8063-051  
8063-015  
2. Slide upper chute onto lower chute, lining up  
notches and channels.  
3. Stretch bungee latch up onto acorn nut on upper  
chute to secure.  
Rotate upper chute  
to point downwards  
towards bags  
LEVELING MOWER DECK  
9
Be sure deck is properly leveled for best mower  
performance. See your mower operator’s manual for  
instructions.  
8063-039  
8063-040  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLY  
FRONT WEIGHTS  
CAUTION  
102008 and Prior Models  
DO NOT operate mower with grass  
catcher, unless the front weights are  
installed.  
1. Remove foot rest from the front of the mower.  
2. Remove the two front bolts that secure the caster  
to the sides of the frame.  
3. Remove the two bolts that secure the caster to the  
bottom of the frame.  
4. Place weight bracket on the front of the frame.  
5. Secure the weight bracket to the frame with the  
four previously removed bolts.  
6. Install weight to the weight bracket with two  
3/8-16 x 2 bolts and two 3/8-16 nuts from the new  
hardware.  
7. Install foot rest on the weight bracket with six  
#10-12 x 1¼ and two #10-12 x 1 screws from the  
new hardware.  
NOTE: the shorter screws go in the center.  
Foot Rest  
Cast Weight  
8063-054  
Weight Bracket  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATION  
TIPS TO IMPROVE BAGGING  
follow the mower operation instructions in the mower  
operator’s manual.  
If the grass catcher fails to pick up cut grass  
or leaves, it is an indication that clogging has  
occurred in the system or that the grass catcher  
containers are full.  
When utilizing the grass catcher on a lawn where  
grass and leaf bagging equipment has not been  
used, thatch and debris that has accumulated for  
long periods of time will be picked up. The amount  
collected and the total time of operation may be  
greater than experienced with regular use of the grass  
catcher.  
a. Disengage blades, place motion control  
levers in neutral position.  
- Unlatch and raise cover.  
- Slide out containers and dispose of  
clippings.  
Always run throttle at full speed when bagging.  
Select a speed low enough to give good mower  
cutting performance, good quality cut and good  
bagging performance.  
- Replace containers, close cover, and latch.  
b. Unlatch chutes and check for clogging.  
- Remove all debris in chute.  
NOTE: It may be necessary to overlap width of  
cut to suit your conditions.  
- Reassemble and latch chutes.  
If grass is extremely tall, it should be mowed  
twice. The first time relatively high, the second  
time to desired height.  
CAUTION  
• DO NOT operate mower with grass  
catcher partially installed.  
Use left hand side of mower for trimming.  
Plastic trash bags (3.0 mil, 30 gallon) can be  
inserted inside grass catcher containers for ease  
of debris disposal. To remove the plastic trash  
bags when full:  
a. Disengage blades, shift into neutral, engage  
the parking brake and stop the engine.  
b. Unlatch and raise cover.  
c. Remove one container at a time by grasping  
container handles and pulling toward the rear,  
off of the tube rails.  
d. With the container resting on the ground,  
close and secure the top of the plastic lawn  
bag.  
• Disengage blades and stop engine  
before leaving mower seat to empty  
containers, unclogging chutes, etc.  
• Close cover before starting.  
• Disengage mower blades when  
crossing driveways or gravel  
surfaces and other areas where  
thrown objects could be a hazard.  
• DO NOT attempt to vacuum up  
cans or other potentially hazardous  
projectiles.  
e. Tip the container on its side and slide the  
filled bag from the container.  
f. Install a new plastic lawn bag with the edges  
of the bag draped over upper lip of the  
container.  
g. Repeat for other containers.  
h. Reinstall containers making sure containers  
overlap left at center supports.  
i. Close cover and secure latches over center  
support tubes.  
Avoid cutting wet grass or mowing in the morning  
while the dew is still heavy. Grass clippings  
collected under these conditions tend to be sticky  
and adhere to the walls of the flow path causing  
clogging.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CUSTOMER RESPONSIBILITIES  
GENERAL RECOMMENDATIONS  
STORAGE  
Always observe safety rules when performing any  
maintenance.  
When grass catcher is to be stored for a period of  
time, clean it thoroughly, remove all dirt, grass, leaves,  
etc. Store in a clean, dry place.  
Before each use check for loose fasteners.  
Clean unit thoroughly after each use.  
BLADE CARE  
for best results mower blades must be kept  
sharp. Replace bent or damaged blades.  
See BLADE CARE instructions in your mower  
operator’s manual.  
CAUTION  
CAUTION  
BEFORE PERFORMING  
MAINTENANCE, SERVICE OR  
ADJUSTMENTS:  
Grass catcher components are  
subject to wear, damage and  
deterioration, which could expose  
moving parts or allow objects to be  
thrown. Frequently check components  
and replace with manufacturer’s  
recommended parts when necessary.  
• Place motion control levers in  
“NEUTRAL” position.  
• Set parking brake.  
• Place clutch control in  
“DISENGAGED” position.  
• Turn ignition key to “OFF” position.  
• Make sure blades and all moving  
parts have completely stopped.  
• Disconnect spark plug wire(s) from  
spark plug(s) and place wire where  
it cannot come in contact with plug.  
CAUTION  
Do not leave grass in bagger  
containers. Empty containers after  
each use and before storing. Failure  
to do so may result in spontaneous  
combustion which could develop  
into a fire.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REPAIR PARTS  
12  
11  
3
2
12  
3
1
8
10  
4
5
6
7
9
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REPAIR PARTS  
ITEM PART NO.  
QTY.  
DESCRIPTION  
ITEM PART NO.  
QTY.  
DESCRIPTION  
1.. 532 192709....1 ....SCREEN, COVER  
7.. 532 192786....2 ....PIN, HINGE  
2.. 532 195373....1 ....COVER  
8.. 532 192550....1 ....SEAL, COVER  
3.. 539 976952....6 ....SCREW #10-24 x 5/8  
4.. 539 108096....2 ....HAIR PIN  
9.. 532 400226....3 ....CONTAINER, SOfT BAG  
10.. 532 192603....1 ....GASKET, COVER  
11.. 532 130895....2 ....HANDLE, BAGGER COVER  
12.. 539 976977....6 ....NUT #10-24 CROWNLOCK  
5.. 539 108097....4 ....PLUG, TUBING END  
6.. 532 176990....1 ....BAGGER, fRAmE  
NOTE: ALL fASTENERS ARE GRADE 5 UNLESS OTHERWISE SPECIfIED.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REPAIR PARTS  
23  
11  
12  
22  
8
23  
18  
7
19  
3
10  
6
32  
20 19 9 23  
2
21 22  
23  
36  
31  
5
17  
30  
35  
14  
28  
1
13  
25  
22  
24  
15  
27  
34  
35  
29  
28  
16  
33  
4
26  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REPAIR PARTS  
ITEM PART NO.  
QTY.  
DESCRIPTION  
ITEM PART NO.  
QTY.  
DESCRIPTION  
1.. 539 113204....1 ....CHUTE, LOWER  
2.. 539 108141....1 ....CHUTE, UPPER  
3.. 539 108082....1 ....DUmP BAG INDICATOR  
4.. 539 108194....2 ....LATCH  
21.. 539 101520....2 ....BOLT, HEX 5/16-18 x 3¼  
22.. 539 990188..10 ....WASHER 5/16 SAE  
23.. 539 112899..10 ....NUT 5/16-18 fLANGE NyLOC  
24.. 539 108447....1 ....DECAL, CE  
5.. 539 108088....1 ....LATCH, HOOD  
25.. 539 107899....4 ....BOLT, HEX 5/16-18 x ¾ GR8  
26.. 539 990588....2 ....BOLT, HEX 3/8-16 x 2  
27.. 539 976979....2 ....NUT 3/8-16 NyLOC  
28.. 539 108089....3 ....PLATED, WELD NUT  
29.. 539 109552....3 ....LOCKWASHER 3/16  
30.. 539 108083....1 ....SCREW #10-24 x 11/8  
31.. 539 108086....1 ....NUT, ACORN #10-24  
32.. 539 108081....1 ....SCREW #10-14 x ½  
33.. 539 113182....2 ....SCRW #10-12 X 1 WASH HD  
34.. 539 113183....6 ....SCRW #10-12 X 1¼ WSH HD  
35.. 539 976952....3 ....SCREW #10-24 x 5/8  
36.. 539 108084....4 ....WASHER 3/16 x ¾ 16 GA  
NOT SHOWN  
6.. 539 131091....1 ....TUBE mOUNT  
7.. 522 854502....1 ....STRAP, SUPPORT, LT  
8.. 522 854402....1 ....STRAP, SUPPORT, RT  
9.. 523 112802....2 ....REINfORCE PLATE  
10.. 539 110234....1 ....SUPPORT, CHUTE  
11.. 539 112294....1 ....fLEX TRIm  
12.. 522 801301....2 ....SPACER PLUG  
13.. 539 108163....1 ....DECAL, CATCHER  
14.. 505 338202....1 ....REAR COLLECTION HITCH  
15.. 539 113225....1 ....WEIGHT BRACKET  
16.. 539 113177....1 ....WEIGHT, CAST  
17.. 539 108085....1 ....SPACER, SPLIT  
18.. 539 976937....2 ....BOLT, HEX 5/16-18 x 2  
19.. 539 990627....4 ....BOLT, HEX 5/16-18 x 1¼  
20.. 539 110472....2 ....BOLT, RD HD 5/16-18 x 1¼  
539 990598 ... 4.... WASHER ¼ fLAT  
539 113226 ... 4.... BOLT 5/16-18 x 1 THD fRm  
NOTE: ALL fASTENERS ARE GRADE 5 UNLESS OTHERWISE SPECIfIED.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TORQUE CHART  
Torque Specifications  
Hex Head Cap Screws  
The torque values shown should be used as a general guideline when specific torque values are not given.  
U.S. Standard Hardware  
Grade  
SAE Grade 5  
SAE Grade 8  
Flangelock Screw  
w/Flangelock Nut  
ft./lbs  
ft./lbs  
Nm  
12  
ft./lbs  
13  
Nm  
18  
ft./lbs  
Nm  
¼
5/16  
3/8  
9
18  
24  
28  
38  
24  
40  
33  
54  
31  
42  
46  
62  
7/16  
50  
68  
75  
108  
156  
224  
305  
502  
801  
1912  
½
75  
102  
150  
203  
339  
513  
1060  
115  
165  
225  
370  
591  
1410  
9/16  
5/8  
110  
150  
250  
378  
782  
¾
7/8  
11/8  
** Grade 5 - Minimum commercial quality (lower quality not recommended)  
Metric Standard Hardware  
Grade  
ft./lbs  
Grade 8.8  
ft./lbs  
Grade 10.9  
Grade 12.9  
Nm  
2
ft./lbs  
2.2  
Nm  
3
ft./lbs  
2.7  
Nm  
3.6  
7
M4  
M5  
1.5  
3
4
4.5  
6
5.2  
M6  
5.2  
7
7.5  
10  
8.2  
11  
M7  
8.2  
11  
12  
16  
15  
20  
M8  
13.5  
24  
18  
18.8  
35.2  
62.2  
100  
147  
202  
275  
390  
498  
474  
25  
21.8  
43.5  
75  
29  
M10  
M12  
M14  
M16  
M18  
M20  
M22  
M24  
M27  
32  
47  
58  
43.5  
70.5  
108  
142  
195  
276  
353  
530  
58  
83  
100  
159  
235  
323  
440  
628  
794  
1205  
94  
133  
196  
269  
366  
520  
664  
996  
119  
176  
242  
330  
471  
596  
904  
144  
190  
260  
368  
470  
707  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P/N 115 247227 R1  
06/15/09  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Agri Fab Lawn Mower 45 02671 page
Craftsman Lawn Mower 2473729 User Guide
Exmark Lawn Mower TT20KCE User Guide
Global Machinery Company Lawn Mower RL501A User Guide
Husqvarna Lawn Mower 47 User Guide
Husqvarna Lawn Mower YTH2042XP User Guide
Sears Lawn Mower 91728861 User Guide
Sears Lawn Mower 917372852 User Guide
Snapper Lawn Mower FRP21600TV User Manual
Snapper Lawn Mower MZM2301KH ZM5202M MZM5203M ZM6102M User Manual