For Serial Nos.
510,000 & Higher
Part No. 103-9195 Rev. A
Download from Www.Somanuals.com. All Manuals Search And Download.
EXMARK PARTS PLUS® PROGRAM
EFFECTIVE DATE: September 1, 1995
Program
If your Exmark dealer does not have the Exmark part in stock,
Exmark will get the parts to the dealer the next business day or
the part will be FREE* Guaranteed!!
How the Program Works
1.
If dealer does not have part in stock for a "down" unit at
the time of request by customer, the dealer contacts his
distributor by 1:00 p.m., local time, and requests Exmark
Parts Plus® shipment of six (6) line items or less.
2.
Distributor ships part(s) to dealer or customer, as
requested by dealer, same day, overnight UPS
Distributor bills dealer for part and freight charges where
applicable.
3.
4.
5.
6.
If distributor does not have the part(s) in stock to satisfy Exmark Parts Plus® order, he contacts Exmark by 3:00 p.m.,
central time, with an Exmark Parts Plus® order of six (6) line items or less.
If order is received by 3:00 p.m. central time, Exmark ships part(s) direct to dealer or customer, as requested by
distributor, same day, overnight UPS, Exmark bills the distributor for parts and shipping charges, where applicable.
The customer pays for the part and freight if it is shipped under the Exmark Parts Plus® and if it arrives in
accordance to the program.
Who pays for the part and freight if it fails to arrive overnight in accordance to the program?
A. Under any circumstance the customer does not pay.
B. If the part does not arrive overnight due to:
1. The dealer not submitting the Exmark Parts Plus® order to his Exmark distributor by 1:00 p.m., the dealer
pays for the part and freight.
2. The Distributor being unable to ship the part the same day or not submitting the Exmark Parts Plus® order
to Exmark by 3:00 p.m., central time, the Distributor pays for the part and freight.
3. Exmark being unable to ship the part and the Exmark parts order is received by 3:00 p.m., central time,
Exmark pays for the part and freight.
4. If the part does not arrive overnight due to the shipper (UPS), the shipper pays for the freight and Exmark
pays for the part.
The following restrictions apply -- The Exmark Parts Plus® Program is available only through participating Exmark
Dealers and applies only to orders submitted on this program Monday through Thursday. Parts Plus service is available
only in the 48 contiguous United States. UPS has initiated a Saturday delivery program to many areas of the continental
United States and can be requested for an overnight shipment on Friday to be delivered Saturday. The next day air
charge, plus the Saturday delivery fee will be the responsibility of the purchaser. Exmark Mfg. will assume no
responsibility for Saturday delivery shipments. To qualify, all Exmark Parts Plus® orders must be received by Exmark by
3:00 p.m., central time. Orders must be six (6) line items or less. Exclusions from the Exmark Parts Plus® Program are:
Any wholegood or accessory in its entirety, engines and engine replacement parts, 5-speed Peerless transmissions and
5-speed transaxles, hydraulic or hydrostatic wheel motors, cutter decks and engine decks or any item exceeding United
Parcel Service size and weight restrictions.
Due to UPS restrictions, aerosol spray paint is considered a hazardous material and cannot be shipped via UPS next day
or Second Day Air.
Exmark Manufacturing stocks a limited supply of parts for transaxles, pumps and wheel motors. These parts can be
ordered for Next Day Air shipment but will not be guaranteed per the Parts Plus Program.
- ii -
Download from Www.Somanuals.com. All Manuals Search And Download.
CONGRATULATIONS on the purchase of your Exmark Mower. This product has been carefully
designed and manufactured to give you a maximum amount of dependability and years of trouble-
free operation.
OPERATOR'S MANUAL
This manual contains assembly, operating, maintenance, adjustment, and safety instructions for
your Exmark mower.
BEFORE OPERATING YOUR MOWER, CAREFULLY READ THIS MANUAL IN ITS ENTIRETY.
By following the operating, maintenance, and safety instructions, you will prolong the life of your
mower, maintain its maximum efficiency, and promote safe operation.
If additional information is needed, or should you require trained mechanic service, contact your
authorized Exmark equipment dealer or distributor.
All Exmark equipment dealers and distributors are kept informed of the latest methods of servicing
and are equipped to provide prompt and efficient service in the field or at their service stations. They
carry ample stock of service parts or can secure them promptly for you from the factory.
All Exmark parts are thoroughly tested and inspected before leaving the factory; however, attention
is required on your part if you are to obtain the fullest measure of satisfaction and performance.
- iii -
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
1. SAFETY
PAGE
1.1 Safety Alert Symbol.................................................................................... 1
1.2 Training....................................................................................................... 1
1.3 Preparation.............................................................................................. 1-3
1.4 Operation................................................................................................. 3-5
1.5 Maintenance & Storage........................................................................... 5-6
1.6 Safety Signs ............................................................................................... 7
2. SPECIFICATIONS
2.1 Model Numbers.......................................................................................... 8
2.2 Engine ........................................................................................................ 8
2.3 Fuel System................................................................................................ 8
2.4 Safety Interlock System.............................................................................. 8
2.5 Transmission.............................................................................................. 8
2.6 Deck ........................................................................................................... 8
2.7 Dimensions................................................................................................. 8
3. ASSEMBLY INSTRUCTIONS
3.1 Installing the Handle................................................................................ 8-9
3.2 Installing the Starter Rope.......................................................................... 9
3.3 Installing the Fuel Tank ............................................................................ 10
3.4 Installing the Discharge Tunnel Plug................................................... 10-11
3.5 Service the Engine .............................................................................. 11-12
4. OPERATION INSTRUCTIONS
4.1 Controls ............................................................................................... 12-13
4.2 Pre-Start .............................................................................................. 13-14
4.3 Operating Instructions ......................................................................... 14-21
5. MAINTENANCE
5.1 Checking the Engine Oil Level ................................................................. 22
5.2 Checking the Blade Brake Clutch............................................................. 22
5.3 Cleaning the Underside of the Lawn Mower Housing ......................... 22-23
5.4 Cleaning the Discharge Tunnel and Plug................................................. 23
5.5 Servicing the Air Filter ......................................................................... 23-25
5.6 Maintaining the Blade.......................................................................... 25-27
5.7 Cleaning the under the belt cover........................................................ 27-28
5.8 Cleaning the Blade Brake Clutch Shield................................................... 28
5.9 Emptying the Fuel Tank and Cleaning the Fuel Filter .............................. 28
5.10 Lubricating the Pivot Arms ....................................................................... 29
5.11 Adjusting the Self-Propelled Drive............................................................ 29
5.12 Servicing the Spark Plug ..................................................................... 29-30
5.13 Changing the Engine Oil........................................................................... 30
5.14 Changing the Oil Filter......................................................................... 30-31
5.15 Lubricating the Gear Case ....................................................................... 32
5.16 Adjusting the Blade Brake Cable.............................................................. 32
5.17 Servicing the Wheels................................................................................ 32
6. STORAGE
6.1 Preparing the fuel system......................................................................... 33
6.2 Preparing the Engine................................................................................ 34
6.3 General Storage Information.................................................................... 34
6.4 Removing the Lawn Mower from Storage........................................... 34-35
7. ACCESORIES......................................................................................35
8. TROUBLESHOOTING ....................................................................35-36
9. WARRANTY.........................................................................................37
- iv -
Download from Www.Somanuals.com. All Manuals Search And Download.
1. SAFETY
This lawn mower meets or exceeds the CPSC blade safety requirements for walk-
behind rotary mowers and the B71.4 specifications of the American National Standards
Institute in effect at the time of production.
Exmark designed and tested this lawn mower to offer reasonably safe service; however,
failure to comply with the following instructions may result in personal injury.
1.1 SAFETY ALERT SYMBOL
This SAFETY ALERT SYMBOL
is used both in this manual and on the machine to
identify important safety messages which must be followed to avoid accidents. This
symbol means:
ATTENTION! BECOME ALERT!
YOUR SAFETY IS INVOLVED!
The safety alert symbol appears above information which alerts you to unsafe actions or
situations and will be followed by the word DANGER, WARNING, or CAUTION.
DANGER: White lettering/Red background. Indicates an imminently hazardous situation
which, if not avoided, WILL result in death or serious injury.
WARNING: Black lettering/Orange background. Indicates a potentially hazardous
situation which, if not avoided, COULD result in death or serious injury.
CAUTION: Black lettering/Yellow background. Indicates a potentially hazardous situation
which, if not avoided, MAY result in minor or moderate injury.
1.2 TRAINING
1.2.1
Regard the Exmark mower as a piece of power equipment andteach this regard
to all who operate this unit.
1.2.2
Read the instructions carefully. Familiarize yourself with the controls and the
proper use of the equipment. If the operator(s) or mechanic(s) can not read
English it is the owner’s responsibility to explain this material to them.
1.2.3
1.2.4
Do not allow operation of this machine by untrained personnel. Never allow
children, teenagers, or people unfamiliar with these instructions to use the
mower. Local regulations may restrict the age of the operator.
Avoid mowing while people, especially children, or pets, are nearby. Keep in
mind that the operator or user is responsible for accidents or hazards occurring
to other people or their property.
1.3 PREPARATION
1.3.1
Evaluate the terrain to determine what accessories and attachments are needed
to properly and safely perform the job. Only use accessories and attachments
approved by Exmark.
1.3.2
The use of personal protective equipment, such as (but not limited to) protection
for the eyes, ears, feet, and head is recommended.
CAUTION
POTENTIAL HAZARD
♦ This machine produces sound levels in excess of 85
dBA at the operator’s ear when in operation.
WHAT CAN HAPPEN
♦ Exposure to sound levels of 85 dBA or above for
extended periods of time can cause hearing loss.
HOW TO AVOID THE HAZARD
♦ Wear hearing protection when operating this machine.
- 1 -
Download from Www.Somanuals.com. All Manuals Search And Download.
1.3.3
1.3.4
While mowing, always wear substantial footwear and long trousers. Do not
operate equipment when barefoot or when wearing open sandals.
Thoroughly inspect the area where the equipment is to be used and remove all
stones, sticks, wires, bones, and other foreign objects which may damage the
equipment or cause personal injury to the operator or bystanders.
WARNING
POTENTIAL HAZARD
♦ Engine exhaust contains carbon monoxide, which is an
odorless deadly poison.
WHAT CAN HAPPEN
♦ Carbon monoxide can kill you.
HOW TO AVOID THE HAZARD
♦ Do not run engine indoors or in a small confined area
where dangerous carbon monoxide fumes can collect.
DANGER
POTENTIAL HAZARD
♦ In certain conditions gasoline is extremely flammable
and highly explosive.
WHAT CAN HAPPEN
♦ A fire or explosion from gasoline can burn you, others,
and cause property damage.
HOW TO AVOID THE HAZARD
♦ DO NOT smoke while refueling, and stay away from
an open flame or where gasoline fumes may be ignited
by spark.
♦ Refuel only outdoors.
♦ Store gasoline in an approved container and keep it out
of the reach of children.
♦ Add fuel before starting the engine. Never remove the
cap of the fuel tank or add fuel when engine is running
or when the engine is hot.
♦ Never fill the fuel tank so that the gasoline level rises
above a level that is 1/2” (1.3 cm) below the bottom of
the filler neck to allow for gasoline expansion and
prevent fuel spillage.
♦ If fuel is spilled, DO NOT attempt to start the engine.
Move away from the area of the spill and avoid creating
any source of ignition until fuel vapors have dissipated.
♦ Do not operate without entire exhaust system in place
and in proper working condition.
- 2 -
Download from Www.Somanuals.com. All Manuals Search And Download.
DANGER
POTENTIAL HAZARD
♦ In certain conditions gasoline is extremely flammable
and highly explosive.
WHAT CAN HAPPEN
♦ A static charge can ignite gasoline vapors. A fire or
explosion from gasoline can burn you, others, and
cause property damage.
HOW TO AVOID THE HAZARD
♦ Purchase and store gasoline only in an approved
container.
♦ Always place gasoline containers on the ground away
from your vehicle before filling.
♦ Do not fill gasoline containers inside a vehicle or on a
truck or trailer bed because interior carpets or plastic
truck bed liners may insulate the container and slow
the loss of any static charge.
♦ When practical, remove gas-powered equipment from
the truck or trailer and refuel the equipment with its
wheels on the ground.
♦ If this is not possible, then refuel such equipment on a
truck or trailer from a portable container, rather than
from a gasoline dispenser nozzle.
♦ If a gasoline dispenser nozzle must be used, keep the
nozzle in contact with the rim of the fuel tank or
container opening at all times until fueling is complete.
WARNING
POTENTIAL HAZARD
♦ Gasoline vapor can collect inside enclosed trailers and
may be ignited by electrical sparks or hot
engine/exhaust components.
WHAT CAN HAPPEN
♦ Explosion and fire may occur, resulting in property
damage, personal injury and/or death.
HOW TO AVOID THE HAZARD
♦ Provide adequate ventilation of any enclosed trailer to
prevent build up of gasoline vapors, especially at floor
level.
♦ Refuel only outdoors, never inside an enclosed trailer.
♦ Be sure all fuel tanks and gasoline storage containers
have proper caps installed to prevent spillage and
minimize vapor escaping into the trailer.
♦ Do not place any equipment that is leaking gasoline in
an enclosed trailer.
1.4 OPERATION
Although hazard control and accident prevention are partially dependent upon the
design and configuration of the equipment, these factors are also dependent upon
the awareness, concern, prudence, and proper training of the personnel involved in
the operation, transport, maintenance, and storage of the equipment. It is essential
that all Operator Safety Mechanisms be connected and in operating condition prior
to use for mowing.
- 3 -
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
POTENTIAL HAZARD
♦ Hands, feet, hair, clothing, or accessories can become
entangled in rotating parts.
WHAT CAN HAPPEN
♦ Contact with rotating parts can cause traumatic amputation
or severe lacerations.
HOW TO AVOID THE HAZARD
♦ Do not operate the machine without guards, shields and
safety devices in place and working.
♦ Keep hands, feet, hair, jewelry, or clothing away from
rotating parts.
1.4.1
1.4.2
Give complete, undivided attention to the job at hand.
Mow only in daylight or in good artificial light, keeping away from holes or hidden
hazards. DO NOT operate the mower when children or others are in the area.
1.4.3
1.4.4
When feasible, avoid operating the equipment in wet grass.
Use EXTREME caution when mowing and/or turning on slopes as loss of traction
and/or tip-over could occur. The operator is responsible for safe operation on
slopes.
DANGER
POTENTIAL HAZARD
♦ Mowing on wet grass or steep slopes can cause sliding and
loss of control.
WHAT CAN HAPPEN
♦ Loss of control and/or loss of operator’s footing could result
in a fall with an arm or leg getting under the mower or
engine deck, which may result in serious injury or death.
HOW TO AVOID THE HAZARD
♦ Mow across slopes, never up and down.
♦ Do not mow slopes when grass is wet.
♦ Do not mow near drop-offs or near water.
♦ Do not mow excessively steep slopes.
♦ Reduce speed and use extreme caution on slopes.
♦ Avoid sudden turns or rapid speed changes.
• Progressively greater care is needed as the slope increases.
• Watch for ditches, holes, rocks, dips, and rises that change the operating
angle, as rough terrain could overturn the machine.
• Remove or mark obstacles such as rocks, tree limbs, etc. from the mowing
area. Tall grass can hide obstacles.
• Use extreme care with grass catchers or attachments. These can change the
stability of the machine and cause loss of control.
1.4.5
1.4.6
Use EXTREME caution when backing up. LOOK BEHIND YOU!!
Stop the blades when crossing surfaces other than grass, if mower must be tilted
for transportation, and when transporting the mower to and from the area to be
mowed.
1.4.7
Never operate the mower with damaged guards, shields, or covers. Always
have safety shields, guards, switches, and other devices in place and in proper
working condition.
- 4 -
Download from Www.Somanuals.com. All Manuals Search And Download.
1.4.8
1.4.9
Do Not change the engine governor settings or overspeed the engine. Operating
an engine at excessive speed may increase the hazard of personal injury.
Never attempt to make wheel height adjustments while the engine is running.
1.4.10 Start the engine carefully according to instructions with feet well away from the
blades.
1.4.11 Keep hands, feet, and clothing away from rotating parts while the mower is being
operated. Keep clear of the discharge opening at all times.
1.4.12 Stop the engine, wait for all moving parts to stop, and remove the spark plug
wire(s) and/or remove key:
a) Before checking, cleaning, or working on the mower.
b) After striking a foreign object (inspect the mower for damage and make
repairs before restarting and operating the mower).
c) Before clearing blockages.
d) Whenever you leave the mower.
1.4.13 Stop the engine and wait for all moving parts to stop:
a) Before removing the grass catcher.
b) Before refueling.
c) Before making height adjustments.
1.4.14 To extend the life the engine brake, place the throttle control in the “slow”
position; then stop the engine.
1.4.15 The fuel system is provided with a shut-off valve. The fuel shut-off valve is used
to shut off the fuel when:
a) The machine will not be used for a few days
b) During transport to and from the job
c) When parking inside a building
1.4.16 This mower was designed for one operator only. Keep all others away from
mower during operation.
1.4.17 Do Not mow with the discharge deflector raised, removed or altered unless
there is a grass collection system or mulch kit in place and working properly.
1.4.18 Grass catcher components are subject to wear, damage and deterioration, which
could expose moving parts or allow objects to be thrown. Frequently check the
components and replace them with the manufacturer’s recommended parts
when necessary.
1.4.19 Be aware of the mower discharge and direct discharge away from others.
1.4.20 Do Not operate mower under the influence of alcohol or drugs.
1.4.21 Use care when approaching blind corners, shrubs, trees, or other objects that
may obscure vision.
1.5 MAINTENANCE AND STORAGE
1.5.1
For engine maintenance, follow the engine manufacturer's recommendations
precisely as stated in the engine manual.
1.5.2
Keep engine and engine area free from accumulation of grass, leaves, excessive
grease or oil, and other debris which can accumulate in these areas. These
materials can become combustible and may result in a fire.
1.5.3
1.5.4
Store fuel in a container specifically designed for this purpose. Store the fuel
container in a cool, dry place.
Keep the mower and fuel container in locked storage to prevent children from
playing or tampering with them.
- 5 -
Download from Www.Somanuals.com. All Manuals Search And Download.
1.5.5
1.5.6
Gasoline powered equipment or fuel containers should not be stored in a basement
or any enclosed area where open pilot lights or heat appliances are present.
Maximum mowing results and safety can only be achieved if the mower is
properly maintained and operated correctly.
1.5.7
Check all bolts frequently to maintain proper tightness.
1.5.8
1.5.9
Keep all guards, shields and safety devices in place and in safe working condition.
Frequently check for worn or damaged components that could create a hazard.
1.5.10 All replacement parts must be the same as or equivalent to the parts supplied as
original equipment.
1.6 SAFETY SIGNS
1.6.1
Keep all safety signs legible. Remove all grease, dirt and debris from safety
signs and instructional labels.
1.6.2
1.6.3
Safety signs must be replaced if they are missing or illegible.
When new components are installed, be sure that current safety signs are
affixed to the replaced components.
1.6.4
1.6.5
1.6.6
New safety signs may be obtained from your authorized Exmark equipment
dealer or distributor or from Exmark Mfg. Co. Inc.
Safety signs can be affixed by peeling off the backing to expose the adhesive
surface. Apply only to a clean, dry surface. Smooth to remove any air bubbles.
Familiarize yourself with the following safety signs and instruction labels. They
are critical to the safe operation of your Exmark commercial mower.
PART NO.: 104-1329
LOCATION: Center of
Handle Bar
PART NO.: 77-0500
LOCATION: On Discharge Plug
For Push Units
PART NO.: 68-7410
LOCATION: Top Center of
Mower Deck
PART NO.: 52-2610
LOCATION: Top Center of
Mower Deck
For Self-Propelled Units
PART NO.: 52-2620
LOCATION: Top Center of
Mower Deck
PART NO.: 93-7398
LOCATION: On Discharge Tunnel
PART NO.: 98-8017
LOCATION: On Grass Bag
- 6 -
Download from Www.Somanuals.com. All Manuals Search And Download.
For Units with a Blade Brake Clutch
PART NO.: 43-8480
LOCATION: Top RH Surface of Mower Deck
For Units without a Blade Brake Clutch
PART NO.: 39-5770
LOCATION: Top RH Surface of Mower Deck
For Units with a Blade Brake Clutch
PART NO.: 1-213240
LOCATION: Top Rear Surface of
Mower Deck
For Units with a
For Units without a
Blade Brake Clutch
PART NO.: 103-6328
LOCATION: Top Surface of
Throttle Control
Blade Brake Clutch
PART NO.: 103-6327
LOCATION: Top Surface of
Throttle Control
For Units without a Blade Brake Clutch
PART NO.: 104-8585
LOCATION: Top LH Surface of Mower Deck
For Self-Propelled Units
PART NO.: 103-6329
LOCATION: Top Surface of
Shifter Control
- 7 -
Download from Www.Somanuals.com. All Manuals Search And Download.
2. SPECIFICATIONS
2.1 MODEL NUMBER:
M216HSP; M216HSPC; M216KA; M216KASP; M216KASPC
2.2 ENGINE
2.2.1 Engine Specifications: See your engine owner's manual.
2.2.2 RPM (No Load): 3300 rpm
2.3 FUEL SYSTEM
2.3.1 Capacity: 4 qt. (3.8 liter) Kawasaki Units; 2.1 qt (2.0 liter) Honda Units
2.3.2 Type of Fuel: Use only clean, fresh, regular grade, unleaded gasoline with the
pump sticker octane rating of 87 or higher. In countries using the research
method, it should be 90 octane minimum.
2.3.3 Fuel Filter: Non –replaceable, in tank
2.3.4 Fuel Shut Off Valve (Kawasaki Units Only): in-line, 1/4 turn
2.4 SAFETY INTERLOCK SYSTEM
For units without a Blade Brake Clutch: Operator must have the blade control bail
depressed to start the engine. Releasing the blade control bail will cause the engine to
stop.
2.5 TRANSMISSION
2.5.1 3 speeds forward
Speed range: 1st - 2.0 mph (3.2 km/h)
2nd - 2.9 mph (4.6 km/h)
3rd - 4.1 mph (6.6 km/h)
2.6 DECK
2.9.1 Cutting Width: 21” (53 cm)
2.9.2 Blade Brake: When the blade engagement control is moved to the disengaged
position a friction brake pad stops the rotation of the blades.
2.9.3 Cutting Height: Adjusts in 1/2" (.64 cm) increments from .75” to 3.25” (1.9 cm-8.3 cm).
2.7 DIMENSIONS
2.10.1 Overall Width: 22.25”
2.10.2 Overall Length and Height:
Handle Setting
High
Length
Height
60.5” (153.7 cm)
64.25” (163.2 cm)
67.0” (170.2 cm)
42.75” (108.6 cm)
40.38 (102.6 cm)
37.88 (96.2 cm)
Medium
Low
2.10.3 Curb Weight*: 122 lbs (55 kg)
*Weights will vary slightly depending on engine option.
3. ASSEMBLY INSTRUCTIONS
NOTE: Determine the left and right sides of the machine from the normal operating position.
3.1 Installing the Handle
1. Mount the handle to the outside of the lawn mower housing (using the top hole) with
2 cap screws (Fig. 1), washers, and thin nylon insert locknuts.
2. Secure the handle latches to the handle with 2 carriage bolts (5/16–18 x 1-3/4 in.),
and black knobs (Fig. 1).
- 8 -
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: You can adjust the handle height for comfortable operation. Stand behind
the handle to determine the height. To adjust the handle height, position the
carriage bolts into the upper, middle, or lower mounting holes in the handle latches
and secure with the black knobs.
3. For units with Honda Engines: Slide the bag support rod through the bag alignment
plate and into the upper, middle, or lower mounting holes in the handle and secure
each end with a cap locknut (Fig. 1). The bag support rod mounting hole location
corresponds with the mounting hole location for the handle latches as shown in the
table below.
Bag Support Rod
Handle Latch
Mounting Hole Location
Mounting Hole Location
Lower
Middle
Upper
Lower
Middle
Upper
Secure the top of the bag alignment plate with a carriage bolt and cap locknut (Fig. 1).
For units with Kawasaki Engines: Slide the bag support rod into the upper, middle,
or lower mounting holes in the handle and secure each end with a cap locknut (Fig.
1). The bag support rod mounting hole location corresponds with the mounting hole
location for the handle latches as shown in the table above.
4. Use a cable tie to secure the control cables to the left handle below the bag support
rod.
Figure 1
3.2 Installing the Starter Rope (Units without a Blade Brake Clutch Only)
1. Pull the starter rope from the engine through the rope guide on the handle (Fig 2.).
Rope Guide
Starter Rope
Figure 2
- 9 -
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3 Installing the Fuel Tank and the Fuel Line (Units with Kawasaki Engines Only)
1. Start the two self-tapping screws into the bottom of the fuel tank and then remove
the screws (Fig. 3).
2. Hook the plastic clips on the front of the fuel tank onto the fuel tank bracket (Fig. 3).
3. Secure the fuel tank to the tank base with the two self-tapping screws (Fig. 3). Do
not overtighten the screws.
Fuel Tank
Plastic Clips
Fuel Tank
Bracket
Self Tapping
Screw
Tank Base
Figure 3
4. Remove the red cap from the end of the fuel line and from the end of the elbow
fitting on the fuel tank (Fig. 4).
5. Slide the end of the fuel line onto the elbow fitting (Fig. 4).
6. Secure the fuel line in place with the fuel line clamp (Fig. 4).
Elbow Fitting
Fuel Valve
Fuel Line
Figure 4
3.4 Installing the Discharge Tunnel Plug
1. Open the discharge door by pulling forward on the handle and moving it rearward
(Fig. 5). Hold the discharge door handle to prevent the spring-loaded door from
closing while you insert the plug.
Discharge Door Handle
Plug rotated clockwise
.
Figure 5
- 10 -
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Since the plug is slightly wider than the discharge tunnel opening, rotate the plug
clockwise slightly while inserting it (Fig. 5).
Note: Ensure that the arrow on the plug decal points upward.
3. Push the plug all the way in until the spring clip on the bottom of the plug clicks into
place, locking the plug securely into the discharge tunnel (Fig. 6).
Spring Clip
Figure 6
4. Release the discharge door handle to lock the top of the plug.
3.5 Service the Engine
3.4.1 Filling the Crankcase with Oil
For Units with Honda Engines: The engine crankcase can hold 22 ounces (0.65
liters) of oil. Use only high-quality SAE 10W-30 weight detergent oil that has the
American Petroleum Institute (API) service classification SH, SJ, or equivalent.
Before each use, ensure that he oil level is between the lower limit and upper limit
marks on the dipstick (Fig 7.).
Figure 7
For Units with Kawasaki Engines: Initially, fill the crankcase with 30 ounces (0.88
liters) of oil. Use only high-quality SAE 30 or SAE 10W-30 weight detergent oil
that has the American Petroleum Institute (API) service classification SF, SG, SH,
or SJ.
Oil Capacity
With Oil Filter
30 ounces (0.88 L)
24 ounces (0.70 L)
Without Oil Filter
Before each use, ensure that the oil level is between the Add and Full marks on
the dipstick (Fig. 8).
- 11 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 8
4. OPERATION INSTRUCTIONS
NOTE: Determine the left and right sides of the machine from the normal operating position.
4.1 CONTROLS
4.1.1 Familiarize yourself with the controls and operation of the unit.
Carefully read the following information about the controls and their operation.
4.1.2 Blade Control Bail:
Located on the upper handle as shown in Figure 9. When the blade control bail
is depressed, the system senses that the operator is in the normal operator's
position.
For units with a Blade Brake Clutch: When the blade control bail is released, the
system senses that the operator has moved from the normal operating position
and will stop the blade.
For units without a Blade Brake Clutch: When the blade control bail is released,
the system senses that the operator has moved from the normal operating position
and will kill the engine.
Figure 9
4.1.3 Self-Propel Drive Bail (For Self-Propelled units only):
Located on the upper handle as shown in Figure 9. When the self-propel drive
bail is squeezed, the unit will move forward at the speed set on the speed control
lever. When this bail is released the unit will stop moving.
4.1.4 Throttle-Choke Control:
The throttle-choke control is located on the left side of the handles as shown in
Figure 10. The lever is used to control engine speed. Moving the lever to the full
forward
(Choke) position will place the lever in the choke position. The choke
aids in starting a cold engine. Moving the throttle control forward will increase
engine speed and moving it to the rear will decrease engine speed.
- 12 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 10
For units with a Blade Brake Control: The throttle-choke control also includes an
engine kill position. Moving the lever into the full rearward
the engine.
(Off) position will kill
4.1.5 Blade Control Lever (Blade Brake Clutch Units Only):
The blade control lever is located on the right side of the handle next to the Blade
Control Bail as shown in Figure 10. Moving the blade control lever into the full
forward position while depressing the blade control bail engages the blade.
Releasing the blade control bail automatically disengages the blades.
4.1.6 Ground Speed (Shifter) Control (Self-Propelled Units Only):
The ground speed control is located on the right side of the handles below the
blade engagement lever as shown in Figure 10. The ground speed control has
three settings which control the ground speed of the mower.
4.1.7 Fuel Shut-Off Valve:
For Kawasaki Units: The fuel shut off valve is installed on the fuel line midway
between the fuel tank and the engine (See Figure 4).
For Honda Units: The fuel shut off valve is located on the engine as shown in
Figure 11.
Figure 11
The fuel shut off valve shuts off the flow of fuel when the machine will not be used
for a few days, when parking inside a building, and during transport to and from
the job. Rotate the valve 1/4 turn clockwise to shut off fuel. Rotate the valve 1/4
turn counter-clockwise to turn on fuel.
4.2 PRE-START
4.2.1 Refer to Section 5 Maintenance and perform all of the necessary inspection and
maintenance steps.
4.2.2 Fill the Fuel Tank with Gasoline
See Section 1.3 Preparation section for safety information regarding the proper
way to handle gasoline.
For best results, use clean, fresh, lead free gasoline with an octane rating of 87 or
higher. To ensure freshness, purchase only the quantity of gasoline that you
- 13 -
Download from Www.Somanuals.com. All Manuals Search And Download.
expect to use in 30 days. Using unleaded gasoline results in fewer combustion
deposits and longer engine life.
NOTE: Do not add oil to the gasoline.
NOTE: Do not use methanol, gasoline containing methanol, gasohol containing
more the 10% ethanol, premium gasoline or white gas. Using these fuels can
damage the engine’s fuel system.
NOTE: Do not use gasoline that has been stored since the last mowing season or
longer.
1. Clean around the fuel tank cap (Fig 12 & 13).
Figure 12
(Honda Engines Only)
Figure 13
(Kawasaki Engines Only)
2. Remove the cap from the tank.
3. Fill the fuel tank with unleaded gasoline to within 1/4 to 1/2 inch (6 to 13 mm)
from the top of the tank. Do not fill into the filler neck.
NOTE: Do not fill the tank more than 1/4” (6 mm) from the top of the tank
because the gasoline must have room to expand.
4. Install the fuel tank cap and wipe up any spilled gasoline
4.2.3 Make sure you understand the controls, their locations, their functions, and their
safety requirements.
4.3 OPERATING INSTRUCTIONS
4.3.1 Read the Engine Owner's Manual carefully for detailed operating instructions and
maintenance regarding the engine.
- 14 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Before attempting to operate the unit, refer to Section 1 (Safety) and follow all
safety, operating, and preparation guidelines as stated in that section.
4.3.2 Starting the Engine
1. Connect the wire to the spark plug (For Honda Units: See Figure 12, For
Kawasaki Units: See Figure 14).
Figure 14
(Kawasaki Units Only)
2. Open the fuel valve (Kawasaki Units: See Figure 4, Honda Units: See Figure
11).
3. Move the throttle-choke control to the
(Choke) position.
NOTE: Do not use the choke when the engine is warm.
4. For units without a Blade Brake Clutch: Hold the blade control bail to the
handle.
5. Pull the starter handle lightly until you feel resistance, then pull it sharply.
Allow the rope to return slowly.
6. When the engine starts, move the throttle control to the Fast position, and set
the ground speed control as desired.
NOTE: If the engine fails to start after 3 pulls, repeat steps 3-6.
4.3.3 Stopping the Engine:
For units without a Blade Brake Clutch: Release the blade control bail. Both the
engine and the blade should stop within 3 seconds.
For units with a Blade Brake Clutch: Release the blade control bail. The blade should
stop within 3 seconds. Move the throttle to the
(Off) position to kill the engine.
NOTE: If the blade does not stop within 3 seconds after releasing the blade
control bail, contact an Authorized Service Dealer.
4.3.4 Using the Self-Propel Drive (Self-Propelled Units Only):
The lawn mower has three ground speeds. 1 is slow, 2 is medium, and 3 is fast
(See Figure 10).
1. Start the engine.
2. Using the ground speed control, select the desired ground speed.
3. Squeeze the drive bail against the handle (See Figure 9).
NOTE: Do not shift speeds while squeezing the ground speed control against
the handle. This can damage the transmission. Release the ground speed
control before changing speeds.
NOTE: You can vary the ground speed by increasing or decreasing the
distance between the ground speed control and the handle. Lower the control
bar to decrease the ground speed when you are making a turn or if the lawn
mower is moving too fast for you. If you lower the control bar too far the lawn
mower stops self-propelling. Squeeze the ground speed control closer to the
- 15 -
Download from Www.Somanuals.com. All Manuals Search And Download.
handle to increase the ground speed. When you hold the ground speed
control tight against the handle, the lawn mower self-propels at the maximum
ground speed. Move the ground speed control to the Neutral position when
you use the lawn mower for trimming or whenever you leave the lawn mower.
4.3.5 Operating the Blade Control Lever (Blade Brake Clutch Units Only):
1. Start the engine.
2. Squeeze the blade control bail against the handle (Fig. 9).
3. Move the blade control lever to the full forward Latch position. Blades should
engage (Fig. 10).
4. Release the blade control bail to disengage the blades.
NOTE: The blade control lever will release rapidly when the blade control bail
is released. To avoid minor injury, keep hands clear of the blade control lever
when the blade control bail is released.
4.3.6 Using the Discharge Tunnel:
1. Stop the engine and wait for all moving parts to stop.
2. Insert the plug. (Refer to Section 3.4 Installing the Discharge Plug).
3. To remove the plug, move the discharge door handle rearward and lift up the
spring clip on the bottom of the plug. When the plug is unlocked, pull it out of
the discharge tunnel.
NOTE: When grass is thick and lush, clippings may collect on and around the
discharge tunnel plug. This may make removing the plug difficult. Clean the
plug thoroughly after each use.
4.3.7 Checking the Blade Brake Clutch (Blade Brake Clutch Units Only):
Check the Blade Brake Clutch (BBC) system before each use to ensure that it is
operating properly.
Normal Test:
1. Stop the engine and wait for all moving parts to stop.
2. Move the lawn mower onto a paved surface in a non-windy area.
3. Set all four wheels in to the 2-1/2 in. (64 mm) cutting height (Fig 16).
4. Set the ground speed selector to the N (Neutral) position.
5. Take a half sheet of newspaper and crumple it into ball small enough to go under
the deck (about three inches or 76 mm in diameter) as shown in Figure 15.
Figure 15
6. Place the ball of newspaper five inches (12.7 cm) in front of the lawn mower
(Fig. 15).
7. Start the engine.
8. Squeeze the blade control bail against the handle.
9. Move the blade control lever to the full forward Latch position. Blades should
engage.
- 16 -
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Release the blade control bail. You should hear a “bang.” The blade should
stop in three seconds.
11. Immediately push the lawn mower over the newspaper ball.
12. Stop the engine and wait for all moving parts to stop.
13. Walk around the lawn mower to check for the newspaper ball. If the ball did
not go under the deck, repeat step 7 through 12.
14. Pull the lawn mower away from the newspaper. If the newspaper ball
unravels or is shredded, the blade has not properly stopped, resulting in an
unsafe operating condition. Contact an Authorized Service Dealer.
DANGER
POTENTIAL HAZARD
♦ If the blade brake clutch system is inoperative, the
blade will continue to rotate when you release the blade
control bail.
WHAT CAN HAPPEN
♦ Contact with the blade could occur, causing serious
injury.
HOW TO AVOID THE HAZARD
♦ Check the BBC operation before each use.
♦ Never use the BBC-equipped lawn mower with an
inoperative safety system.
♦ Take your lawn mower to an Authorized Service Dealer
for repair if the safety system fails to operate properly.
Test Using the Grass Bag:
1. Install the empty grass bag on the discharge tunnel.
2. Start the engine.
3. Squeeze the blade control bail against the handle.
4. Move the blade control lever to the full forward Latch position. The bag should
begin to inflate, indicating that the blade is engaged and rotating.
5. Release the blade control bail. If the bag does not immediately deflate, it
indicates that the blade is still rotating. The blade brake clutch mechanism
may deteriorating, and, if ignored could result in an unsafe operating
condition. Have the lawn mower inspected and serviced by an Authorized
Service Dealer.
4.3.8 Adjusting the Cutting Height
Each wheel is adjusted individually with a wheel height adjustment lever. The
cutting heights are listed in the following table.
Cutting Heights
0.75 in (19 mm) 2.25 in (57 mm)
1.25 in (32 mm) 2.75 in (70 mm)
1.75 in (44 mm) 3.25 in (83 mm)
- 17 -
Download from Www.Somanuals.com. All Manuals Search And Download.
DANGER
POTENTIAL HAZARD
♦ Adjusting the cutting height levers could bring your
hands into contact with a moving blade.
WHAT CAN HAPPEN
♦ A moving blade can cause serious injury.
HOW TO AVOID THE HAZARD
♦ Stop the engine and wait for all movement to stop
before adjusting the cutting height.
♦ Do not put your fingers under the housing when
adjusting the cutting height.
1. Pull the wheel height adjustment lever toward the wheel (Fig. 16) and move it
to the desired setting.
Figure 16
2. Release the wheel height adjustment lever and set it securely in the notch.
3. Adjust all the wheels to the same cutting height setting.
4.3.9 Using the Grass Bag
Occasionally, you may wish to use the grass bag for bagging extra long grass,
lush grass, or leaves.
Installing the Grass Bag
1. Stop the engine and wait for all moving parts to stop.
2. Ensure that the discharge door handle is fully forward and that the pin is
engaged in the catch (Fig. 17).
Bag Frame on
Retaining Post
Pin Engaged in Catch
Handle fully Forward
Discharge Door Closed
G0211
Figure 17
3. Slide the hole in the bag frame onto the retaining post on the discharge tunnel
(Fig. 17)
4. Set the rear of the bag frame onto the bag support rod.
5. Pull the discharge door handle forward until the pin clears the catch, and
move the handle rearward until the pin locks in the bag notch (Fig. 18).
- 18 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Pin locked in
bag notch
G0212
Figure 18
NOTE: The discharge door in the lawn mower housing is now open.
Mowing with the Grass Bag
WARNING
POTENTIAL HAZARD
♦ A worn grass bag could allow small stones and other
similar debris to be thrown in the operator’s or
bystander’s direction.
WHAT CAN HAPPEN
♦ Thrown objects can result serious personal injury or
death to the operator or bystanders.
HOW TO AVOID THE HAZARD
♦ Check the grass bag frequently. If it is damaged, install
a new Exmark replacement bag.
Cut the grass until the bag is full
NOTE: Do not overfill the bag.
Removing the Grass Bag
1. Stop the engine and wait for all moving parts to stop.
2. Raise the discharge door handle and move it forward to engage the pin with
the catch (Fig. 17).
3. Grasp the handles at the front and the rear of the bag and lift the bag off the
lawn mower.
4. Gradually tip the bag forward to empty the clippings.
5. To install the bag, refer to the Installing the Grass Bag on page 18.
DANGER
POTENTIAL HAZARD
♦ If the discharge door does not close completely, the
lawn mower could throw objects.
WHAT CAN HAPPEN
♦ Thrown objects can result serious personal injury or
death to the operator or bystanders.
HOW TO AVOID THE HAZARD
♦ If you cannot close the door because the grass
clippings clog the discharge area, stop the engine and
gently move the discharge door handle back and forth
until you can close the door completely. If you still
cannot close the door, remove the obstruction with a
stick, not your hand.
- 19 -
Download from Www.Somanuals.com. All Manuals Search And Download.
DANGER
POTENTIAL HAZARD
♦ The lawn mower can throw grass clippings and other
objects though an open discharge tunnel.
WHAT CAN HAPPEN
♦ Objects thrown with enough force could cause serious
personal injury or death to an operator or bystander.
HOW TO AVOID THE HAZARD
♦ Never open the door on the discharge tunnel when the
engine is running.
4.3.10 Operating Tips
•
Review the Safety Instructions (Section 1) and read this manual carefully
before operating the lawn mower.
•
•
Set the engine speed to the fastest position for the best cutting results.
Maintain a sharp blade throughout the cutting season. Periodically file down
nicks on the blade. Replace the blade when necessary with an original
Exmark replacement blade.
•
Clean the air filter frequently. Mulching stirs up more clippings and dust
which clogs the air filter and reduces engine performance.
Cutting Grass
•
Grass grows at different rates at different times of the year. In the
summer heat, it is best to cut grass at the 2-1/4 inch (57 mm), 2-3/4 inch
(70 mm), or 3-1/4 inch (83 mm) cutting height settings. Cut only about a
third of the grass blade at a time. Do not cut below the 2-1/4 inch (57 mm)
setting unless the grass is sparse or it is late fall when grass growth
begins to slow down.
•
•
When cutting grass over 6 inches (15 cm) tall, first mow at the highest
cutting height setting and walk slower; then mow again at a lower setting for
the best lawn appearance. If the grass is too long and the leaves clump on
top of the lawn, the lawn mower may plug and cause the engine to stall.
Alternate the mowing direction. This helps disperse the clippings over the
lawn for even fertilization.
If the finished lawn appearance is unsatisfactory, try one or more of the following:
•
•
•
•
•
•
Sharpen the blade.
Walk at a slower pace while mowing.
Raise the cutting height on your lawn mower.
Cut the grass more frequently.
Overlap cutting swaths instead of cutting a full swath with each pass.
Set the cutting height on the front wheels one notch lower than the rear
wheels. For example, set the front wheels at 2-1/4 inches (57 mm) and
the rear wheels at the 2-3/4 inches (70 mm).
Cutting Leaves
•
After cutting the lawn, ensure that half of the lawn shows through the cut
leaf cover. You may need to make more than one pass over the leaves.
•
•
For light leaf coverage, set all the wheels at the same cutting height setting.
If there are more than 5 inches (12.7 cm) of leaves on the lawn, set the
front cutting height 1 or 2 notches higher than the rear cutting height. This
makes it easier to feed the leaves under the lawn mower deck.
- 20 -
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Slow down your mowing speed if the lawn mower does not cut the leave
finely enough.
If you mow over oak leaves, you can add lime to the grass in the spring to
reduce the acidity of the oak leaves.
5. MAINTENANCE
NOTE: Determine the left and right sides of the machine from the normal operating position.
Recommended Maintenance Schedule
Service Interval
Maintenance Procedure
• Check the engine oil level.
• Check the stopping time of the blade brake. The blade must stop
within 3 seconds of releasing the bail; if it does not; contact an
Authorized Service Dealer for repair.
Each Use
• Remove grass clippings and dirt from under the housing.
• Clean the discharge tunnel and the discharge tunnel plug.
•
Check the blade and the engine mounting fasteners. Tighten them
if they are loose.
5 Hours
• Change the engine oil (without the oil filter).1
• Sharpen or replace the blade; maintain it more frequently if the
edge dulls quickly in rough or in sandy conditions.
• Clean the blade brake clutch shield.
50 Hours
75 Hours
100 Hours
• Check for leaks in the fuel system and/or a deteriorating fuel hose.
Replace parts if necessary.
• Remove grass clippings and debris from under the belt cover.
• Lubricate the pivot arms.
• Adjust the self-propel drive system.
• For Kawasaki Engines: Change the oil filter.
• Inspect the spark plug and replace it if necessary.
• Clean the cooling system; remove grass clippings, debris, or dirt
from the engine air cooling fins and starter. Clean the system more
frequently in dirty or high-chaff conditions.
• Lubricate the gear case.
• For units with a Blade Brake Clutch: Adjust the blade brake cable.
• Service the wheels.
• For Honda Engines: Replace the paper air filter. Replace it more
250 Hours
frequently in dusty operating conditions.
• For Kawasaki Engines: Replace the paper air filter. Replace it
300 Hours
Storage
more frequently in dusty operating conditions.
• Empty the fuel tank before repairs as directed or before storage.
1Change the engine oil after the first 5 operating hours.
NOTE: Refer to your engine operator’s manual for additional maintenance procedures.
CAUTION
POTENTIAL HAZARD
♦ If you leave the wire on the spark plug, someone could
accidentally start the engine.
WHAT CAN HAPPEN
♦ Accidental starting of the engine could seriously injure
you or other bystanders.
HOW TO AVOID THE HAZARD
♦ Disconnect the wire from the spark plug before you don
any maintenance. Set the wire aside so that it does not
accidentally contact the spark plug.
- 21 -
Download from Www.Somanuals.com. All Manuals Search And Download.
5.1 Checking the Engine Oil Level
Service Interval: Before each use.
Make sure that the oil level is between the Add and the Full marks as shown on the
dipstick (Fig. 7 & 8). If the oil level is below the Add mark, add oil. Refer to Filling the
Crankcase with Oil (Section 3.4.1).
5.2 Checking the Blade Brake Clutch (For units with a Blade Brake Clutch Only)
Refer to Section 4.3.7 Checking the Blade Brake Clutch.
5.3 Cleaning the Underside of the Lawn Mower Housing.
To ensure the best performance, keep the underside of the lawn mower housing clean
(Fig. 19).
Blade Brake Unit shown for
Reference Only
G0214
Figure 19
Washing Method
1. Position the lawn mower on a flat concrete or asphalt surface near a garden hose.
2. Start the engine.
3. Hold the running garden hose a handle level and direct the water to flow on the
ground just in front of the right rear tire (Fig. 20).
G0213
Figure 20
4. Engage the blade.
NOTE: The blade will draw in water and wash out clippings. Let the water run until
you no longer see clipping being washed out from under the housing.
5. Disengage the blade, stop the engine and wait for all moving parts to stop.
6. Turn off the water.
7. Start the lawn mower, engage the blade, and let the lawn mower run for a few
minutes to dry out its components.
Scraping Method
If washing does not remove all debris from under the lawn mower, scrape it clean.
1. Disconnect the wire from the spark plug.
2. Drain the fuel from the fuel tank. Refer to Emptying the Fuel tank and Cleaning the
Fuel Filter on page 19.
- 22 -
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
POTENTIAL HAZARD
♦ Tipping the lawn mower may cause the fuel to leak
from the carburetor or the fuel tank.
WHAT CAN HAPPEN
♦ Gasoline is extremely flammable, highly explosive, and
under certain conditions, can cause personal injury or
property damage.
HOW TO AVOID THE HAZARD
♦ Avoid fuel spills by running the engine dry or by
removing the gasoline with a hand pump; never siphon.
3. Tip the lawn mower onto its right side.
4. Remove the dirt and grass clippings with a hardwood scraper. Avoid burrs and sharp
edges.
5. Turn the lawn mower upright.
6. Fill the fuel tank.
7. Connect the wire to the spark plug.
5.4 Cleaning the Discharge Tunnel and Plug
Service Interval: Remove the plug from the discharge tunnel and clean it after each use.
Always be sure that the discharge tunnel door closes securely when you release the
handle. If the debris prevents the discharge door form closing securely, clean the inside
of the discharge tunnel and the door thoroughly.
WARNING
POTENTIAL HAZARD
♦ Grass clippings and other objects can be thrown from
an open discharge tunnel.
WHAT CAN HAPPEN
♦ Thrown objects can cause serious injury or kill the
operator or bystanders.
HOW TO AVOID THE HAZARD
♦ Never start or operate the lawn mower unless one of
the following is true:
-
The discharge tunnel plug is locked securely in the
discharge tunnel.
-
-
-
The grass bag is locked in place.
The optional side discharge chute is locked in place.
The discharge tunnel door is locked in place.
5.5 Servicing the Air Filter
For Kawasaki Units:
Service Interval: Clean the foam pre-cleaner every 25 operating hours.
Replace the paper air filter once every season or every 300 operating hours. (more
frequently in dusty conditions)
NOTE: Do not operate the engine without the air filter assembly; extreme engine
damage will occur.
1. Stop the engine and wait for all moving parts to stop.
2. Disconnect the wire from the spark plug (Fig 12 & 14).
3. Remove the screw that secures the air cleaner cover (Fig 21.)
- 23 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Paper Air Filter
Screw
Cover
G0215
Figure 21
4. Remove the cover and clean it thoroughly (Fig 21).
5. Remove the paper air filter and discard it as required (Fig. 22)
Paper Air Filter
Foam Pre Cleaner
G0216
Figure 22
NOTE: Do not try to clean a paper air filter.
6. Remove the foam pre-cleaner and wash it with a mild detergent and water, then blot
it dry (Fig 21).
7. Saturate the pre-cleaner with clean engine oil, then squeeze it (do not twist) to
remove the excess oil.
8. Install the foam pre-cleaner.
9. Install the new paper air filter.
10. Install the cover and secure it with the screw.
For Honda Units:
Service Interval: Inspect the air cleaner elements after each use.
Clean the cover, base, foam and paper elements after every 25
operating hours.
Replace the elements after ever 250 operating hours (sooner if they
are damaged or excessively dirty)
NOTE: Do not operate the engine without the air cleaner assembly; extreme engine
damage will occur.
1. Stop the engine and wait for all moving parts to stop.
2. Disconnect the wire from the spark plug (Fig. 12 & 14)
3. Remove the 2 wing bolts that secure the cover (Fig. 23).
- 24 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Wing Bolts
Cover
Paper Element
Foam Element
Base
G0217
Figure 23
4. Remove the cover.
NOTE: Be careful to prevent dirt and debris from falling into the base.
5. Remove the foam and paper elements from the base (Fig. 23).
6. Remove the foam element from the paper element (Fig. 23).
7. Inspect the foam and paper elements, and replace them if they are damaged or
excessively dirty.
8. Tap the paper element on a hard surface several times or use compressed air not
exceeding 30 psi (207 kPa) through the filter from the wire screen side to remove
any excess dirt. If the paper element is excessively dirty, replace it.
NOTE: Never try to brush dirt off the paper element; brushing forces the dirt into the
fibers.
9. Clean the foam element in warm, soapy water or in a nonflammable solvent.
10. Rinse and dry the foam element thoroughly.
11. Dip the foam element in clean engine oil, then squeeze out the excess oil.
NOTE: Excess oil in the foam element restricts the air flow through the element and
may reach the paper filter and clog it.
12. Wipe dirt from the base and the cover with a moist rag.
NOTE: Be careful to prevent dirt and debris from entering the air duct leading to the
carburetor.
13. Install the air cleaner elements and ensure that they are properly positioned.
14. Securely install the cover with the 2 wing bolts.
5.6 Maintaining the Blade
Always mow with a sharp blade. A sharp blade cuts cleanly and without tearing or
shredding the grass blades.
1. Stop the engine and wait for all moving parts to stop.
2. Disconnect the wire from the spark plug (Fig. 12 & 14).
3. Drain the gasoline from the fuel tank.
4. Tip the lawn mower onto its right side (Fig. 24 and 25.).
- 25 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Blade
Anti-Scalp Cup
Bolt and Lock Washer
Blade
G0233
G0218
Accelerator
Blade Nuts
Accelerator
Figure 24
(Blade Brake Clutch Units Only)
Figure 25
(Units without a Blade Brake Clutch Only)
5. Inspect the Blade for sharpness and wear, especially where the flat and the curved
parts meet (Fig. 26A). Because sand and abrasive material can wear away the metal
that connects the flat and curved parts of the blade, check the blade before using the
lawn mower. If you notice a slot or wear (Fig. 26B and 26C), replace the blade.
Sail
Sail
Flat
Sail
Wear
Slot
G0219
Figure 26
NOTE: For the best performance, install a new blade before the cutting season
begins. During the year, file down any small nicks to maintain the cutting edge.
DANGER
POTENTIAL HAZARD
♦ A worn or damaged blade can break.
WHAT CAN HAPPEN
♦ A piece of the blade could be thrown into the operator’s
or bystander’s area, resulting in serious personal injury
or death.
HOW TO AVOID THE HAZARD
♦ Inspect the blade periodically for wear or damage.
♦ Replace a worn or damaged blade.
If it is necessary to remove the blade for replacement or sharpening, complete the
following steps:
6. Remove the blade. Make sure to grasp the end of the blade using a rag or a thickly
padded glove.
For Blade Brake Clutch Units: Remove the blade nuts, anti-scalp cup, accelerator,
and the blade (Fig. 24)
For Units without a Blade Brake Clutch: Remove the blade bolt, lockwasher,
accelerator, and blade.
- 26 -
Download from Www.Somanuals.com. All Manuals Search And Download.
7. For Sharpening: File the top side of the blade to maintain its original cutting angle
(Fig. 27A) and inner cutting edge radius (Fig. 27B). The blade will remain balanced
if you remove the same amount of material from both cutting edges.
Cutting Edge Radius
Cutting Angle
G0220
Figure 27
8. Check the balance of the blade by placing the center hole of the blade over a nail or
screwdriver shank clamped horizontally in a vise (Fig. 28). If either end of the blade
rotates downward, file that end (not the cutting edge). The blade is properly
balanced when neither end drops.
G0221
Figure 28
9. Re-install a sharp balanced Exmark blade, the accelerator, the lock washer, and the
blade bolt. The sail of the blade must point toward the top of the lawn mower housing
for proper installation. Torque the blade bolt to 50 ft-lb (68 N-m).
WARNING
POTENTIAL HAZARD
♦ Operating the lawn mower without the accelerator in
place can cause the blade to flex, bend, or break.
WHAT CAN HAPPEN
♦ Thrown objects from a broken blade can result in
serious injury or death to the operator or bystanders.
HOW TO AVOID THE HAZARD
♦ Do not operate the lawn mower without the accelerator.
10. Return the lawn mower to its upright position.
11. Connect the wire to the spark plug.
5.7 Cleaning under the belt cover (Self-Propelled Models Only):
1. Stop the engine and wait for all moving parts to stop.
2. Disconnect the wire from the spark plug (Fig 12 & 14).
3. Remove the bolts that secure the belt cover tot eh lawn mower housing (Fig. 29).
Belt Cover
G0223
Figure 29
4. Lift off the cover and brush out all the debris around the belt area.
5. Install the belt cover.
- 27 -
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Connect the wire to the spark plug
5.8 Cleaning the Blade Brake Clutch Shield
Service Interval: Clean at the end of each mowing season.
1. Stop the engine and wait for all moving parts to stop.
2. Disconnect the wire from the spark plug (Fig. 12 & 14).
3. Drain the gasoline form the fuel tank.
4. Tip the lawn mower onto its right side (air filter up).
WARNING
POTENTIAL HAZARD
♦ Tipping the lawn mower may cause the fuel to leak from
the carburetor or the fuel tank.
WHAT CAN HAPPEN
♦ Gasoline is extremely flammable, highly explosive, and
under certain conditions, can cause personal injury or
property damage.
HOW TO AVOID THE HAZARD
♦ Avoid fuel spills by running the engine dry or by
removing the gasoline with a hand pump; never siphon.
5. Remove the blade nuts, the anti-scalp cup, the accelerator, and the blade (Fig. 30).
BBC Shield
Tabs and Nuts
Tab and Bolt
G0222
Figure 30
6. Loosen the tabs that secure the BBC shield to the deck by loosening the nuts or the
bolts on the tabs (Fig. 30). Rotate the tabs 180° to move them out of the way.
7. Remove the BBC shield and brush or blow all the debris from under the shield and
around the BBC system.
8. Install the BBC shield. Rotate the tabs 180° back into position. Tighten the nuts to
the bolts on tabs to secure the BBC shield to the deck.
9. Install the blade, the accelerator, the anti-scalp cup, and the two blade nuts.
10. Turn the lawn mower upright.
11. Connect the wire to the spark plug.
5.9 Emptying the Fuel Tank and Cleaning the Fuel Filter (Kawasaki Units Only):
Service Interval: Clean the fuel filter element every 100 operating hours.
The fuel filter (screen) element is located inside the fuel tank.
1. Stop the engine and wait for it to cool down.
NOTE: Drain gasoline for a cold engine only.
2. Disconnect the wire from the spark plug (Fig. 12 & 14).
3. Close the fuel valve (Fig. 3).
4. Disconnect the fuel line (Fig. 3) by loosening the tube clamp at the carburetor.
- 28 -
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Open the fuel valve by turning the lever to the open position (Fig. 3).
6. Drain the gasoline completely from the tank and fuel line into an approved fuel
container.
7. Remove the fuel tank from the mower.
8. Close the fuel valve.
9. Pour a small amount of fuel in the fuel tank, move the fuel around in the tank, and
pour it out into an approved fuel container.
10. Install the fuel tank and fuel line.
5.10 Lubricating the Pivot Arms
Service Interval: Lubricate after every 50 operating hours or when the season ends.
1. Move the rear wheel cutting height levers to the center setting.
2. Wipe the grease fittings with a clean rag (Fig. 31).
Grease Fitting
G0225
Figure 31
3. Install a grease gun onto the fitting and gently apply 2 or 3 pumps of #2 multi-
purpose lithium base grease (Fig. 31).
NOTE: Excessive grease pressure may damage the seals.
5.11 Adjusting the Self-Propel Drive (Self-Propelled Units Only):
If the lawn mower does not self-propel or has a tendency to creep forward when the
control bar is released, adjust the wheel drive control knob on the rear of the gear box.
1. Close the door in the lawn mower housing and remove the grass bag.
2. If the lawn mower does not self propel, rotate the control knob clockwise 1/2 turn to
tighten the belt.
If the lawn mower creeps forward, rotate the knob 1/2 turn counterclockwise to
loosen the belt (Fig. 32).
G0224
Control Knob
Figure 32
5.12 Servicing the Spark Plug:
Service Interval: Check the spark plug after every 100 operating hours.
1. Stop the engine and wait for all moving parts to stop.
2. Disconnect the wire from the spark plug (Fig. 12 & 14).
3. Clean around the spark plug.
4. Remove the spark plug from the cylinder head.
- 29 -
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: Replace a cracked, fouled, or dirty spark plug. Do not clean the electrodes
because grit entering the cylinder can damage the engine.
5. Set the gap on the plug to 0.030 in. (0.76 mm) (Fig.33)
0.030 in. (0.76 mm)
Figure 33
6. Install the spark plug and the gasket seal.
7. Torque the plug to 17 ft-lb (23 N-m).
8. Connect the wire to the spark plug.
5.13 Changing the Engine Oil:
Service Interval: Change the oil after the first 5 operating hours (or the first month)
Then after every 50 operating hours (or every 6 months)
1. Run the engine to warm the engine oil.
NOTE: Warm oil flows better and carries more contaminates.
WARNING
POTENTIAL HAZARD
♦ Oil may be hot after engine has been run.
WHAT CAN HAPPEN
♦ Contact with hot oil can cause severe personal injury.
HOW TO AVOID THE HAZARD
♦ Avoid contacting the hot engine oil when you drain it.
2. Stop the engine and wait for all moving parts to stop.
3. Disconnect the wire from the spark plug (Fig 12 & 14).
4. Place a suitable drain pan under the dipstick/oil drain (Fig. 6.)
5. Clean around the dipstick.
6. Remove the dipstick by rotating the cap counterclockwise and pulling it out.
7. Raise the left side of the lawn mower to drain the oil form the dipstick fill tube into
the drain pan.
8. After draining the oil, return the lawn mower to the operating position.
9. Fill the crankcase with fresh oil to the upper limit mark on the dipstick.
10. Insert the dipstick into the filler neck and rotate the cap clockwise until it is tight.
11. Wipe up any spilled oil.
12. Connect the wire to the spark plug.
13. Recycle the used oil according to local codes.
5.14 Changing the Oil Filter (Kawasaki Units Only):
Service Interval: Replace the oil filter after every 100 operating hours.
- 30 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Oil Filter
G0227
Fuel Line
Figure 34
1. Run the engine to warm the oil.
WARNING
POTENTIAL HAZARD
♦ Oil may be hot after engine has been run.
WHAT CAN HAPPEN
♦ Contact with hot oil can cause severe personal injury.
HOW TO AVOID THE HAZARD
♦ Avoid contacting the hot engine oil when you drain it.
2. Stop the engine and wait for all moving parts to stop.
3. Disconnect the wire from the spark plug (Fig. 12 & 14).
4. Drain the engine oil.
5. Place a rag under the oil filter to catch any oil that may leak out as you remove the
filter.
6. Remove the oil filter.
7. Use your finger to coat the gasket on the new filter with clean engine oil.
Gasket
G0228
Figure 35
8. Install the new filter and hand tighten it 2/3 turn only.
9. Fill the crankcase to the Full line on the dipstick with fresh oil.
10. Connect the wire to the spark plug.
11. Run the engine for about 3 minutes.
12. Stop the engine, wait for all moving parts to stop, and check for oil leakage around
the filter.
13. Add oil to compensate for the oil in the oil filter.
14. Recycle the used oil filter according to local codes.
5.15 Lubricating the Gear Case (Self-Propelled Units Only):
Service Interval: After every 100 operating, grease the gear case.
- 31 -
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Remove the grass bag.
2. Install a grease gun onto the fitting through the belt cover opening (Fig. 36)
Grease Fitting
Belt Cover
G0229
Figure 36
3. Gently apply one to two pumps of #2 multi-purpose lithium-base grease.
4. Install the grass bag.
5.16 Adjusting the Blade Brake Cable:
Service Interval: Adjust whenever a new blade brake cable assembly it installed
1. Stop the engine and wait for all moving parts to stop.
2. Disconnect the wire from the spark plug (Fig. 12 & 14).
For Blade Brake Clutch Units:
3. Loosen the cable clamp screw until the cable conduit slides (Fig. 37)
Cable Clamp Screw
Cable Conduit
Spring
G0230
Figure 37
4. Pull the cable to remove the slack, but do not put tension on the spring.
5. Tighten the screw to lock the adjustment in place.
6. Connect the wire to the spark plug.
For Self-Propelled Units without a Blade Brake Clutch:
3. Loosen the nut on the cable bracket (Fig. 38).
4. Insert a 3/16 to 1/4 in. (5 to 6 mm) object between the brake control lever and the
handle.
5. Turn the cable adjuster on the brake cable until you remove the slack.
6. Tighten the jam nut.
7. Connect the wire to the spark plug.
For Hand-Push Units:
3. Loosen the jam nut on the blade brake cable clamp (Fig. 38).
4. Insert a 3/16 to 1/4 in. (5 to 6 mm) object between the brake control lever and the
handle. Pull down on the cable conduit until you remove the slack from the wire.
5. Tighten the nut.
6. Connect the wire to the spark plug.
5.17 Servicing the Wheels:
Removing the Wheels
1. Stop the engine and wait for all moving parts to stop.
- 32 -
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Disconnect the wire form the spark plug (Fig. 12 & 14).
3. Remove the bolt, the wheel spacer, and the locknut mounting the wheel to the pivot
arm (Fig. 38).
Bearing/Hub
Assembly
Wheel
Half
Wheel
Spacer
Bearing
Spacer
Locknut
Locknut
G0231
Lug
Lug
Bolt
Wheel
Half
Plastic
Cover
Bearing
Figure 38
4. Separate the wheel halves from the tire by removing four bolts and four locknuts
(Fig. 38).
NOTE: If you remove the bearings from the bearing/hub assembly, remove them by
pressing on the bearing spacer (Fig. 38).
Assembling the Wheels
1. Position the tire onto one wheel half, aligning the lugs on each (Fig. 38).
2. Place the bearing/hub assembly into the center hole of the wheel half. Ensure that
the legs of the hub are positioned over the flange of the hole (Fig.38).
3. Place the other wheel half onto the bearing/hub assembly, aligning the wheel and
the tire slugs and the mounting holes (Fig. 38).
4. Using two fully threaded screws or bolts (1/3-20 x 1.5 in) and non-locking nuts,
loosely secure the wheel halves together. Mount the screws or bolts in the opposing
holes (Fig. 38).
5. Check the alignment of all parts and tighten the screws, alternating from side to side
for a uniform fit until the wheel halves are drawn together (Fig. 38).
6. Install the 2 cap screws and 2 locknuts previously removed in the remaining holes in
the wheel halves and tighten. Remove the 2 long screws or bolts and replace them
with 2 cap screws and 2 locknuts.
7. Install the wheel to the pivot arm with the cap screws, a spacer, and a locknut. Ensure
that the spacer is positioned between the wheel hub and the pivot arm (Fig. 38).
8. Connect the wire to the spark plug.
6. STORAGE
6.1 Preparing the fuel system.
To prepare the lawn mower for off season storage, perform the recommended
maintenance procedures.
Store the lawn mower in a cool, clean, dry place. Cover the lawn mower to keep it clean
and protected.
- 33 -
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
POTENTIAL HAZARD
♦ Gasoline can vaporize if you store it over long periods
of time.
WHAT CAN HAPPEN
♦ Gasoline vapors can explode if they come into contact
with an open flame.
HOW TO AVOID THE HAZARD
♦ Do not store gasoline over long periods of time.
♦ Do not store the lawn mower with gasoline in the fuel
tank or the carburetor in tan enclosure with an open
flame. (For example, a furnace or a water heater pilot
light.)
♦ Allow the engine to cool before storing it in any
enclosure.
Empty the fuel tank when mowing the last time before storing the lawn mower.
1. Run the lawn mower until the engine stops from running out of fuel.
2. Prime the engine and start it again.
3. Allow the engine to run until it stops. When you can no longer start the engine it is
sufficiently dry.
6.2 Preparing the Engine
1. While the engine is still warm, change the oil from the crankcase. Refer to Section
5.13 Changing the Engine Oil.
2. Remove the spark plug (Fig. 12 & 14).
3. Using an oil can, add about one tablespoon of oil to the crankcase through the spark
plug hole.
4. Slowly rotate the engine several times, using the starter rope, to distribute the oil.
5. Install the spark plug but do not connect the wire to the spark plug.
6.3 General Storage Information
1. Clean the lawn mower housing. Refer to Section 5.3 Cleaning the Underside of the
Lawn Mower Housing.
2. Clean any dirt and chaff from the cylinder, cylinder head fins, and blower housing.
3. Remove grass clippings, dirt, and grime form the external parts of the engine, the
shrouding, and the top of the lawn mower housing.
4. Clean the BBC shield. Refer to Section 5.8 Cleaning the Blade Brake Clutch Shield.
5. Check the condition of the blade. Refer to Section 5.6 Maintaining the Blade.
6. Service the air filter. Refer to Section 5.5 Servicing the Air Filter.
7. Lubricate the pivot arms. Refer to Section 5.10 Lubricating the Pivot Arms.
8. Tighten all nuts, bolts, and screws.
9. Touch up all rusted or chipped paint surfaces with paint available form an Authorized
Service Dealer.
6.4 Removing the Lawn Mower from Storage
1. Check and tight all fasteners.
2. Remove the spark plug and spin the engine rapidly by pulling the starter rope to
blow excess oil fro the cylinder.
- 34 -
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Clean the spark plug or replace it if it is cracked, broken, or if the electrodes are
worn.
4. Install the spark plug and torque it to 17 ft-lb (23 N-m).
5. Perform any needed maintenance procedures.
6. Fill the fuel in the fuel tank with fresh gasoline.
7. Check the engine oil level.
8. Connect the wire to the spark plug.
7. ACCESSORIES
You may purchase the following accessory from an Authorized Service Dealer:
Side Discharge Kit
8. TROUBLESHOOTING
Exmark designed and built your lawn mower for trouble free operation. Check the following
components and items carefully, and refer to Section X Maintenance for more information. If
a problem continues, contact an Authorized Service Dealer.
Problem
Possible Causes
Corrective Action
1. The fuel tank is empty or the
fuel system contains stale fuel.
1. Drain and/or fill the fuel tank with
fresh gasoline. If the problem
persists, contact an Authorized
Service Dealer.
Engine does not start
2. The throttle lever is not in the
Choke position.
2. Move the throttle lever to the
Choke position.
3. The wire is not connected to
the spark plug.
3. Connect the wire to the spark
plug.
4. The spark plug is pitted, fouled, 4. Check the spark plug and adjust
or the gap is incorrect.
the gap if necessary. Replace
the spark plug if it is pitted,
fouled, or cracked.
1. The fuel tank contains stale
fuel.
1. Drain and fill the fuel tank with
fresh gasoline.
Engine starts hard or loses
power
2. The fuel cap vent hole is
plugged.
2. Clean the fuel cap vent hole or
replace the fuel cap.
3. The air filter element is dirty
and is restricting the air flow.
3. Clean the air filter pre-cleaner
and/or replace the paper air filter.
4. The underside of the lawn
mower deck contains clippings
and debris.
4. Clean the underside of the lawn
mower deck.
5. The spark plug is pitted, fouled, 5. Check the spark plug and adjust
or the gap is incorrect.
the gap if necessary. Replace
the spark plug if it is pitted,
fouled, or cracked.
6. The engine oil level is low or
the oil is dirty.
6. Check the engine oil. Change
the oil if it is dirty or add oil if it is
low.
- 35 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Possible Causes
Corrective Action
1. The wire is not connected to
the spark plug.
1. Connect the wire to the spark
plug.
Engine runs rough
2. The spark plug is pitted, fouled, 2. Check the spark plug and adjust
or the gap is incorrect.
the gap if necessary. Replace
the spark plug if it is pitted,
fouled, or cracked.
3. The throttle lever is not in the
Fast position.
3. Move the throttle lever to the
Fast position.
4. The air filter element is dirty
and is restricting the air flow.
4. Clean the air filter pre-cleaner
and/or replace the paper air
filter.
Lawn mower or engine
vibrates excessively
1. The blade is bent or is out of
balance.
1. Balance the blade. If the blade
is bent, replace it.
2. The blade mounting bolt is
loose.
2. Tighten the blade mounting bolt.
3. The underside of the lawn
mower deck contains clippings
and debris.
3. Clean the underside of the lawn
mower deck.
4. The engine mounting bolts are
loose.
4. Tighten the engine mounting
bolts.
Uneven cutting pattern
1. All four wheels are not at the
same height.
1. Place all four wheels at the
same height.
2. The blade is dull.
2. Sharpen and balance the blade.
3. Change the mowing pattern.
3. You are mowing in the same
pattern repeatedly.
4. The underside of the lawn
mower deck contains clippings
and debris.
4. Clean the underside of the lawn
mower deck.
Discharge chute plugs
1. The throttle lever is not in the
Fast position.
1. Move the throttle lever to the
Fast position.
2. The cutting height is too low.
2. Raise the cutting height.
3. Slow down.
3. You are mowing too fast.
4. The grass is wet.
4. Allow the grass to dry before
mowing.
5. The underside of the lawn
mower deck contains clippings
and debris.
5. Clean the underside of the lawn
mower deck.
Lawn mower does not self-
propel (Self-Propelled Models
Only)
1. The self-propel drive cable is
out of adjustment or is
damaged.
1. Adjust the self-propel drive
cable. Replace the cable if
necessary.
2. There is debris under the belt
cover.
2. Clean the debris from under the
belt cover.
- 36 -
Download from Www.Somanuals.com. All Manuals Search And Download.
9.
2-Year Limited Warranty
Exmark Turf Equipment
(For units purchased on or after October 1, 2004)
Conditions and Products Covered
Owner’s Responsibilities
Exmark Mfg. Co. Inc. and its affiliate, Exmark Warranty
Company, pursuant to an agreement between them, jointly
warrant on the terms and conditions herein, that we will repair,
replace or adjust any part manufactured by Exmark and found
by us (in the exercise of our reasonable discretion) to be
defective in factory materials or workmanship for a period of
two years.
The Exmark turf equipment, including any defective part,
must be returned to an authorized Exmark service dealer
within the warranty period. This warranty extends only to
turf equipment operated under normal conditions. You
must properly service and maintain your Exmark product
as described in the operator’s manual. Such routine
maintenance, whether performed by a dealer or by you, is
at your expense.
This warranty applies to Exmark turf equipment purchased on
or after October 1, 2004 sold in the US or Canada. This
warranty may only be assigned or transferred to a second (or
third) owner by an authorized Exmark dealer. The warranty
period commences upon the date of the original retail
purchase.
As a condition to this warranty, customer shall have read
the operator's manual and shall have completed and
submitted to Exmark Warranty Company, within the
prescribed time, the Exmark warranty registration.
General Conditions
Products
Warranty Period
2 years
The sole liability of Exmark and Exmark Warranty Company
with respect to this warranty shall be repair and replacement
as set forth herein. Neither Exmark nor Exmark Warranty
Company shall have any liability for any other cost, loss
or damage, including but not limited to, any incidental
or consequential loss or damage.
• All Products (except as noted below)
• All Attachments and Accessories
• Metro 21 Series
1 year
1 year
• Belts and Tires
90 days
• Battery
• Engine*
1 Year Prorated
In particular, we shall have no liability or responsibility for:
Warranty is covered by engine manufacturer
•
•
Expenses related to gasoline, oil or lubricants.
Travel time, overtime, after hours time or other
extraordinary repair charges or charge relating to
repairs or replacements outside of normal business
hours at the place of business of the authorized
Exmark service dealer.
*Please refer to the engine manufacturer’s warranty statement
that is included in the literature packet. We are not authorized
to handle warranty adjustments on engines.
This warranty only includes the cost of parts and labor.
•
Rental of like or similar replacement equipment
during the period of any warranty, repair or
replacement work.
Any telephone or telegram charges or travel charges.
Loss or damage to person or property other than that
covered by the terms of this warranty.
Any claims for lost revenue, lost profit or additional
cost as a result of a claim of breach of warranty.
Attorney's fees.
Items and Conditions Not Covered
This warranty does not cover the following:
•
•
•
•
Pickup and delivery charges to and from any authorized
Exmark Service Dealer.
Any damage or deterioration due to normal use, wear
and tear, or exposure.
Cost of regular maintenance service or parts, such as
filters, fuel, lubricants, tune-up parts, and adjustments.
Any product or part which has been altered or misused
or required replacement or repair due to normal wear,
accidents, or lack of proper maintenance.
Any repairs necessary due to use of parts, accessories
or supplies, including gasoline, oil or lubricants,
incompatible with the turf equipment or other than as
recommended in the operator's manual or other
operational instructions provided by Exmark.
•
•
•
•
No Claim of breach of warranty shall be cause for
cancellation or rescission of the contract of sale of any
Exmark mower.
•
There are no understandings, agreements, representations,
or warranties, express or implied, including but not limited to
any regarding the merchantability (that product is fit for
ordinary use) or fitness for use (that product is fit for a
particular purpose), not specified herein, respecting the
equipment which is the subject of this warranty.
All warranty work must be performed by an authorized Exmark
Service Dealer using Exmark approved replacement parts.
Instructions for Obtaining Warranty Service
1. Contact any Exmark Service Dealer to arrange service at
their dealership. To locate a dealer convenient to you,
may also call 402-223-6375.
Some states do not allow exclusions of incidental or
consequential damages, or limitations on how long an
implied warranty lasts, so the above exclusions and
limitations may not apply to you.
2. Bring the product and your proof of purchase (sales
receipt) to the Exmark Service Dealer.
This warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.
If for any reason you are dissatisfied with the Service Dealer’s
analysis or with the assistance provided, contact us at:
Exmark Customer Service Department
The Exmark Warranty Company
2101 Ashland Avenue
Beatrice, NE 68310
402-223-6375 or
- 37 -
Download from Www.Somanuals.com. All Manuals Search And Download.
SERVICE RECORD
Date
Description of Work Done
Service Done By
- 38 -
Download from Www.Somanuals.com. All Manuals Search And Download.
SEE EXMARK’S COMPLETE
LINE OF ACCESSORIES
RIDING ACCESSORIES
CUSTOM RIDE SEAT SUSPENSION SYSTEM
DECK LIFT ASSIST KIT
HITCH KIT
LIGHT KIT
MICRO-MULCH SYSTEM
ROLL OVER PROTECTION SYSTEM (ROPS)
SNOW BLADE
SUN SHADE
TRASH CONTAINER
TURF STRIPER
ULTRA VAC COLLECTION SYSTEM
ULTRA VAC QUICK DISPOSAL SYSTEM
WALK BEHIND ACCESSORIES
GRASS CATCHER
MICRO-MULCH SYSTEM
STEERABLE SULKY
SULKY HITCH KIT
TURF STRIPER
Check us out on the Web:
WARNING
The engine exhaust from this product
contains chemicals known to the State of
California to cause cancer, birth defects, or
other reproductive harm.
© 1997-2004 EXMARK MFG. CO. INC.
INDUSTRIAL PARK BOX 808
BEATRICE, NE 68310
PART NO. 103-9195 Rev. A
(402) 223-6300
FAX (402) 223-5489
®
ALL RIGHTS RESERVED
PRINTED IN U.S.A.
MFG. CO. INC.
Download from Www.Somanuals.com. All Manuals Search And Download.
|