Harbor Freight Tools Automobile Accessories 91729 User Manual

3 SHELF  
WOODEN RACK  
91729  
ASSEMBLY INSTRUCTIONS  
®
3491 Mission Oaks Blvd., Camarillo, CA 93011  
®.  
Copyright © 2004 by Harbor Freight Tools  
All rights reserved. No portion of this  
manual or any artwork contained herein may be reproduced in any shape or form  
without the express written consent of Harbor Freight Tools.  
For technical questions and replacement parts, please call 1-800-444-3353  
9. Replacement parts. When servicing, use only identical replacement parts. Use  
of any other parts will void the warranty.  
10. Warning: Locate the 3 Shelf Wooden Rack in a spot that is flat without an  
uneven surface.  
11. Always distribute objects on Shelves evenly. Uneven weight distribution  
could cause toppling. Do not allow children to climb on the Shelves or play  
with the wooden rack.  
Warning: The warnings, cautions, and instructions discussed in this instruc-  
tion manual cannot cover all possible conditions and situations that may  
occur. It must be understood by the operator that common sense and caution  
are factors which cannot be built into this product, but must be supplied by the  
operator.  
Unpacking  
When unpacking, check to make sure the following parts are included. If any parts  
are missing or broken, please call Harbor Freight Tools at the number on the cover of  
this manual.  
Assembly Instructions  
1. Assemble all parts on a smooth surface to avoid scratching. Hardware is  
provided.  
2. Set the Side Walls (1) on the floor. Each Shelf (2) is to have the Back Stop  
(3) attached. If not preassembled, attach with Wood Screws (4) in the  
predrilled holes. (See Figure A).  
Back Stops (3)  
Wood Screws  
(4)  
Shelf (2)  
Figure A  
Side Wall (1)  
Shelf (2)  
Figure B  
3. Attach each Side Wall (1) to the Three Shelves (2) with the Wood Screws  
(4) in the predrilled holes. Do not tighten Screws (4) completely until all the  
Shelves (2) are assembled. Check that all is level and then tighten all  
Screws (4). (See Figure B).  
4.  
A varnish or stain may be applied after assembly. Avoid too much moisture  
on the shelving unless you use a waterproof bar finish. Avoid tipping  
assembled Shelves.  
SKU 91729 For technical questions, please call 1-800-444-3353. Page 3  
Parts List  
Part #  
Description  
Qty.  
Side Wall  
Shelf  
Back Stop  
Wood Screw  
1
2
3
4
2
5
5
24  
Assembly Drawing  
Part 2  
Part 3  
Part 4  
Part 4  
Part 4  
Part 4  
Part 4  
Part 4  
Part 4  
Part 4  
Part 1  
Part 1  
Part 2  
Part 3  
Part 4  
Part 4  
Part 4  
Part 4  
Part 4  
Part 4  
Part 4  
Part 4  
Part 2  
Part 3  
Part 4  
Part 4  
Part 4  
Part 4  
Part 4  
Part 4  
Part 4  
Part 4  
PLEASE READ THE FOLLOWING CAREFULLY  
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS  
MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBUTOR  
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS  
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO  
REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR  
EXPRESSLY STATES THat ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN  
BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES  
ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR  
REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACE-  
MENT PARTS THERETO.  
NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts.  
SKU 91729 For technical questions, please call 1-800-444-3353. Page 4  

Amana SKUS ABL1922FES User Manual
Brother MFC 5890CN User Manual
Brother MFC 7840N User Manual
Bryant 561S User Manual
Bryant 704D User Manual
Cecilware Granita Dispenser User Manual
Fisher Price POWER WHEELS H7461 User Manual
Graco IMONITOR 2791 User Manual
Haier HSU 07HS03 User Manual
Heat Controller Comfort Air User Manual