Friedrich SQ06 User Manual

Room Air Conditioners  
AUTO  
F
C
AUTO FAN  
CONTINUOUS  
AM  
88  
ON OFF  
SCEHDUL  
SET POINT  
ROOM TEMP  
E
CHECK  
FI ER  
$MAR  
T
AUTO SPEED  
T
L
SYSTEM  
FAN MODE  
POWER  
FAN SPEED  
SCHEDULE  
Q Chassis Models  
115-Volt: SQ05, SQ06, SQ08, SQ10  
115-Volt: EQ08  
Table of Contents  
7DEOHꢀRIꢀ&RQWHQWV...................................................................................................................................................................................................................................................................................... 3  
Safety Precautions................................................................................................................................................................................................................................................................................... 4  
Unpacking Instructions............................................................................................................................................................................................................................................................................ 5  
:$51,1*ꢃꢀ%HIRUHꢀ2SHUDWLQJꢀ<RXUꢀ8QLW .............................................................................................................................................................................................................................................. 6  
6WDQGDUGꢀ)LOWHUꢀ&OHDQLQJꢀꢄꢀ,QVWDOODWLRQꢀ,QVWUXFWLRQV.............................................................................................................................................................................................................................. 7  
3UHPLXPꢀ&DUERQꢀ)LOWHUꢀ,QVWDOODWLRQꢀ,QVWUXFWLRQV................................................................................................................................................................................................................................... 7  
&RQWUROꢀ3DQHOꢀ2SHUDWLRQ.......................................................................................................................................................................................................................................................................... 8  
1HZꢀ.KOꢀ&RQWUROꢀ2SWLRQV....................................................................................................................................................................................................................................................................... 9  
&RQWUROꢀ3DQHOꢀ2SHUDWLRQꢀ,QVWUXFWLRQV..................................................................................................................................................................................................................................................10  
5HPRWHꢀ&RQWUROꢀ2SHUDWLRQ....................................................................................................................................................................................................................................................................19  
5HPRWHꢀ(IIHFWLYHQHVV............................................................................................................................................................................................................................................................................19  
$LUÀRZꢀ6HOHFWLRQꢀDQGꢀ$GMXVWPHQW........................................................................................................................................................................................................................................................21  
Installation Instructions...........................................................................................................................................................................................................................................................................21  
Items required for installation (provided in straight cooling units only)...........................................................................................................................................................................................22  
Standard Window Installation...............................................................................................................................................................................................................................................................23  
&RUGꢀ5RXWLQJꢀ&KDQJH............................................................................................................................................................................................................................................................................26  
Thru-the-wall Installation .......................................................................................................................................................................................................................................................................28  
)LQDOꢀ,QVSHFWLRQꢀ ꢀ6WDUWꢅXSꢀ&KHFNOLVW ..................................................................................................................................................................................................................................................30  
5RXWLQHꢀ0DLQWHQDQFH.............................................................................................................................................................................................................................................................................31  
6HUYLFHꢀDQGꢀ$VVLVWDQFH.........................................................................................................................................................................................................................................................................31  
$YDLODEOHꢀ$FFHVVRULHV............................................................................................................................................................................................................................................................................31  
Troubleshooting Tips..............................................................................................................................................................................................................................................................................32  
$GGHQGXPꢀꢆ............................................................................................................................................................................................................................................................................................34  
3
Safety Precautions  
Your safety and the safety of others are very important.  
We have provided many important safety messages in this manual and on your appliance. Always read and obey all  
safety messages.  
This is a safety Alert symbol.  
This symbol alerts you to potential hazards that can kill or hurt you and others.  
All safety messages will follow the safety alert symbol with the word “WARNING”  
or “CAUTION”. These words mean:  
Indicates a hazard which, if not avoided, can result in severe personal injury or  
WARNING  
death and damage to product or other property.  
Indicates a hazard which, if not avoided, can result in personal injury and  
damage to product or other property.  
CAUTION  
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you  
what will happen if the instructions are not followed.  
Indicates property damage can occur if instructions are not followed.  
NOTICE  
WARNING  
Refrigeration system  
under high pressure  
Do not puncture, heat, expose to flame or  
incinerate.  
Only certified refrigeration technicians should  
service this equipment.  
R410A systems operate at higher pressures  
than R22 equipment. Appropriate safe  
service and handling practices must be used.  
Only use gauge sets designed for use with  
R410A. Do not use standard R22 gauge sets.  
4
Unpacking Instructions  
STEP 1.  
STEP 2.  
STEP 3.  
&87ꢀ$//ꢀ3$&.,1*ꢀ675$36ꢁ  
STEP 4.  
STEP 5.  
STEP 6.  
STEP 7.  
6/2:/<ꢀ5(029(ꢀ287(5ꢀ%2;ꢁ  
5(029(ꢀ&251(5ꢀ32676ꢁ  
&87ꢀ7$3(ꢀ$1'ꢀ23(1ꢁ  
5(029(7233$&.$*,1*0$7(5,$/$1'&$5721ꢀ  
&217$,1,1*ꢀ6,'(ꢀ&857$,16ꢁ  
5(029(ꢀ81,7ꢀ)520ꢀ6+,33,1*ꢀ75$<ꢁ  
5(029(ꢀ &$5%21ꢀ ),/7(5ꢀ $1'ꢀ +$5':$5(ꢀ )520ꢀ  
%27720ꢀ75$<ꢁ  
STEP 2  
STEP 1  
STRAPS X3  
STEP 4  
STEP 3  
STEP 6  
STEP 7  
STEP 5  
5
Table 1.  
WARNING: Before Operating Your Unit  
CIRCUIT RATING  
OR TIME DELAY  
FUSE  
REQUIRED WALL  
RECEPTACLE  
Make sure the wiring is adequate for your unit.  
MODEL  
If you have fuses, they should be of the time delay type. Before you install  
or relocate this unit, be sure that the amperage rating of the circuit breaker  
or time delay fuse does not exceed the amp rating listed in Table 1.  
AMP  
VOLT  
NEMA NO.  
SQ05 SQ06  
SQ08 SQ10  
EQ08  
15  
125  
5-15P  
DO NOT use an extension cord.  
The cord provided will carry the proper amount of electrical power to the  
unit; an extension cord may not.  
WARNING  
Make sure that the receptacle is compatible with the air  
conditioner cord plug provided.  
Electrical Shock Hazard  
This insures proper grounding. If you have a two prong receptacle you  
Make sure your electrical receptacle has the  
same configuration as your air conditioner’s  
plug. If different, consult a Licensed Electrician.  
electrician. The grounded receptacle should meet all national and local  
codes and ordinances. Under no circumstances should you remove the  
ground prong from the plug. You must use the three prong plug furnished  
with the air conditioner.  
Do not use plug adapters.  
Do not use an extension cord.  
Do not remove ground prong.  
Test the power cord  
Always plug into a grounded 3 prong oulet.  
Failure to follow these instructions can result in  
death, fire, or electrical shock.  
All Friedrich room air conditioners are shipped from the factory with a  
Leakage Current Detection Interrupter (LCDI) equipped power cord. The  
LCDI device meets the UL and NEC requirements for cord connected air  
conditioners effective August 2004.  
Figure 1  
To test your power supply cord:  
1. Plug power supply cord into a grounded 3 prong outlet.  
RESET  
2. Press RESET (See Figure 1).  
3. Press TEST, listen for click; the RESET button trips and pops out.  
TEST  
4. Press and release RESET (Listen for click; RESET button latches  
and remains in). The power cord is ready for use.  
WARNING:  
TEST BEFORE EACH USE!  
1. PRESS REST BUTTON.  
2. PLUG LCDI INTO POWER  
RECEPTACLE.  
Once plugged in, the unit will operate normally without the need to reset  
the LCDI device.  
3. PRESS TEST BUTTON,  
RESET BUTTON SHOULD  
POP UP.  
4. PRESS RESET BUTTON  
FOR USE.  
DO NOT USE IF ABOVE TEST  
FAILS.  
WHEN GREEN LIGHT IS ON.  
IT IS WORKING  
PROPERLY!  
If the LCDI device fails to trip when tested or if the power supply cord is  
damaged, it must be replaced with a new power supply cord from the  
manufacturer. Contact our Technical Assistance Line at (800) 541-6645.  
To expedite service, please have your model number available.  
NOTICE  
FRR072  
Do not use the LCDI device as an ON/OFF switch.  
Failure to adhere to this precaution may cause  
premature equipment malfunction.  
6
Standard Filter Cleaning / Installation Instructions  
STEP 2.  
STEP 3.  
Figure 3  
&OHDQꢀWKHꢀIURQWꢀIUDPHꢀE\ꢀZDVKLQJꢀWKHꢀGLUWꢀIURPꢀWKHꢀ¿OWHUꢁꢀ8VHꢀDꢀ  
PLOGꢀVRDSꢀVROXWLRQꢀLIꢀQHFHVVDU\ꢁꢀ$OORZꢀ¿OWHUꢀWRꢀGU\ꢁ  
STEP 1.  
6ZLQJꢀWKHꢀGRRUꢀRSHQꢀDQGꢀUHPRYHꢀWKHꢀ¿OWHUꢀE\ꢀJUDVSLQJꢀWKHꢀ  
¿OWHUꢀJULSꢀDQGꢀSXVKLQJꢀWKHꢀ¿OWHUꢀKROGHUꢀXSZDUGꢀDQGꢀRXWZDUGꢁ  
,QVWDOOꢀWKHꢀ¿OWHUꢀEDFNꢀLQWRꢀWKHꢀXQLWꢁꢀ)ROORZꢀWKHꢀ,QVWUXFWLRQVꢀRQꢀ  
the inside of the front door.  
Figure 2  
FILTER  
DOOR  
FILTER  
DOOR  
FILTERFRAME  
INSTRUCTIONS  
FRR075  
FRR076  
Premium Carbon Filter Installation Instructions  
3ODFHꢀWKHꢀFDUERQꢀ¿OWHUꢀRYHUꢀWKHꢀ¿OWHUꢀIUDPHꢀVRꢀWKDWꢀWKHꢀFDUERQꢀ  
¿OWHU¶VꢀꢉꢀLQVWDOODWLRQꢀKROHVꢀDOLJQꢀZLWKꢀWKHꢀꢉꢀ¿OWHUꢀIUDPHꢀKRRNVꢁꢀ  
(Figure 4)  
3OHDVHꢀIROORZꢀWKHꢀLQVWUXFWLRQVꢀEHORZꢀWRꢀLQVWDOOꢀWKHꢀ)ULHGULFKꢀFDUERQꢀ¿OWHUꢁꢀ7KHꢀFDUERQꢀ  
¿OWHUꢀVKRXOGꢀEHꢀUHSODFHGꢀDIWHUꢀꢊꢋꢋꢀKRXUVꢀRIꢀRSHUDWLRQꢂꢀꢊꢀPRQWKVꢂꢀRUꢀPRUHꢀRIWHQꢀLIꢀ  
QHHGHGꢀIRUꢀPD[LPXPꢀHIIHFWLYHQHVVꢁꢀ  
:KHQꢀ\RXꢀUHSODFHꢀWKHꢀFDUERQꢀ¿OWHUꢂꢀFOHDQꢀWKHꢀZDVKDEOHꢀPHVKꢀ¿OWHUꢀLIꢀGLUW\ꢁꢀ$OORZꢀ  
PHVKꢀ¿OWHUꢀWRꢀGU\ꢀEHIRUHꢀUHLQVHUWLQJꢁ  
6HFXUHWKHFDUERQ¿OWHUWRWKH¿OWHUIUDPHꢁ0DNHVXUHWKDWꢀ  
DOOꢀꢉꢀ¿OWHUꢀIUDPHꢀKRRNVꢀDUHꢀLQVHUWHGꢀWKURXJKꢀDOOꢀꢉꢀLQVWDOODWLRQꢀ  
KROHVꢀRIꢀWKHꢀFDUERQꢀ¿OWHUꢁꢀ7KHꢀLQVWDOODWLRQꢀKRRNVꢀZLOOꢀKROGꢀWKHꢀ  
¿OWHUꢀVHFXUHO\ꢁ  
STEP 1.  
5HPRYHꢀWKHꢀEODFNꢀSODVWLFꢀ¿OWHUꢀIUDPHꢀIURPꢀWKHꢀXQLWꢀIROORZLQJꢀWKHꢀ  
LQVWUXFWLRQVꢀRQꢀWKHꢀLQVLGHꢀRIꢀWKHꢀ¿OWHUꢀGRRUꢁꢀꢇ:DVKDEOHꢀPHVKꢀ  
¿OWHUꢀLVꢀLQFOXGHGꢀDQGꢀLVꢀSHUPDQHQWO\ꢀDWWDFKHGꢀWRꢀ¿OWHUꢀIUDPHꢈꢁ  
STEP 3.  
Place the black plastic filter frame with the carbon filter  
installed (Figure 5) back into the front of the unit, following  
WKHꢀLQVWUXFWLRQVꢀRQꢀWKHꢀLQVLGHꢀRIꢀWKHꢀ¿OWHUꢀGRRUꢁ  
STEP 2.  
/D\ꢀWKHꢀEODFNꢀSODVWLFꢀ¿OWHUꢀIUDPHꢀRQꢀDꢀÀDWꢀVXUIDFHꢂꢀZLWKꢀWKHꢀꢉꢀ  
¿OWHUꢀIUDPHꢀKRRNVꢀIDFLQJꢀXSZDUGꢁꢀ  
&DUERQꢀ¿OWHUꢀLVꢀQRZꢀUHDG\ꢀIRUꢀXVHꢌꢀ  
Figure 4  
Figure 5  
FILTERFRAME  
HOOKS(6)  
FRR077  
FRR078  
7
Control Panel Operation  
/HW¶VꢀFKHFNꢀRXWꢀKRZꢀWRꢀFRQWUROꢀ\RXUꢀDLUꢀFRQGLWLRQHUꢁꢀ2QꢀWKHꢀFRQWUROꢀSDQHOꢂꢀMXVWꢀDERYHꢀWKHꢀ32:(5ꢀꢂꢀLVꢀDꢀOLTXLGꢀFU\VWDOꢀGLVSOD\ꢀꢇ/&'ꢈꢁꢀ$OOꢀRIꢀWKHꢀFRQWUROꢀSDQHOꢀIXQFWLRQꢀ  
buttons and mode icons can be viewed in Figure 6.  
Power On – Press the button to turn on the air conditioner. The power button illuminates to indicate that the power is on. The backlight on the power switch  
ZLOOꢀDXWRPDWLFDOO\ꢀGLPꢀWRꢀꢍꢋꢎꢀLQWHQVLW\ꢀDIWHUꢀꢆꢏꢀVHFRQGVꢀRIꢀLQDFWLYLW\ꢁꢀ7KHꢀUHPRWHꢀFRQWUROꢀFDQꢀDOVRꢀEHꢀXVHGꢀWRꢀWXUQꢀSRZHUꢀ21ꢀꢄꢀ2))ꢀꢇ6HHꢀ5HPRWHꢀ&RQWUROꢈꢁ  
Display ±ꢀ7KHꢀGLVSOD\ꢀLVꢀDꢀKLJKꢀHI¿FLHQF\ꢀ/&'ꢀZLWKꢀDꢀEXLOWꢅLQꢀZKLWHꢀEDFNOLJKWꢁꢀ7KHꢀEDFNOLJKWꢀKDVꢀDQꢀDXWRPDWLFꢀWZRꢀꢇꢍꢈꢀVWHSꢀGLPꢀIXQFWLRQꢁꢀ$IWHUꢀꢆꢏꢀVHFRQGVꢀRIꢀ  
LQDFWLYLW\ꢂꢀWKHꢀGLVSOD\ꢀGLPVꢀWRꢀꢍꢋꢎꢀLQWHQVLW\ꢁꢀ$IWHUꢀDQꢀDGGLWLRQDOꢀꢆꢍꢋꢀVHFRQGVꢂꢀWKHꢀGLVSOD\ꢀVZLWFKHVꢀRIIꢁꢀ7RXFKLQJꢀDQ\ꢀEXWWRQꢀDXWRPDWLFDOO\ꢀFKDQJHVꢀWKHꢀGLVSOD\ꢀ  
to full brightness.  
There are three control push buttons on each side of the display.  
FAN  
CONTROL  
MAINTENANCE  
REQUIRED  
Figure 6  
ONLY LOCKED  
COOL  
HEAT  
WI-FI  
OPERATING (if equipped)  
SYSTEM:  
TEMPERATURE:  
Cycles between  
HEAT, COOL or  
FAN ONLY  
Increment UP  
WAIT  
F
FAN MODE:  
C
TEMPERATURE:  
Increment DOWN  
AUTO FAN  
Sets fan to either:  
- Cycle automatically  
- Run continuously  
AM  
PM  
CONTINUOUS  
88  
ON OFF  
SET POINT  
ROOM TEMP  
SCHEDULE ON  
SCHEDULE  
CHECK $MART  
FILTER  
AUTO SPEED  
TIMER / SCHEDULE  
Turns ON or OFF  
FAN SPEED:  
Sets fan speed:  
LOW, MED, HIGH  
or AUTO  
TIMER ON  
(as equipped)  
IR WINDOW:  
Do not block  
ON / OFF:  
Turns unit on/off  
2 DIGIT DISPLAY  
FILTER  
Shows Setting for:  
Check / Clean  
- Set Point (Temperature)  
- Room Temperature  
- Clock (AM/PM)  
AUTO SPEED  
Automatically selects  
best fan cooling speed  
FAN SPEED  
Selected fan speed  
$MART OPERATING  
(if equipped)  
FRR079  
8
Kühl Control Options  
The  
Kühl gives you a variety of options for control, programming, and  
scheduling including wireless capabilities  
The “Residential” (40 Hr. Work Week) Schedule has four (4) time periods: 06:00,  
08:00, 18:00, and 22:00. This option will cause your Kühl Q unit to raise the room  
temperature temporarily to 85°F during the hours when most people are away  
at work, lower them again to 78°F prior to the time when most people will return  
home, and then raise slightly to 82°F to maintain a comfortable temperature  
overnight.  
Wireless Programming and Control:  
The new FriedrichLink™ Adapter (sold seperately) allows you to conviently  
control, program and monitor your air conditioning unit remotely from a  
smartphone or computer.  
The “Commercial” (5-Day Business Week) Schedule has two (2) time periods:  
07:00 and 18:00. This option will cause your air conditioner to raise temperatures  
to 84°F after typical working hours and on weekends when commercial spaces  
are typically unoccupied.  
FriedrichLink™ Adapter accessory available through Friedrich authorized  
(See Control Panel Operation Instructions Section)  
Pre-Programmed Scheduling Options:  
Customizable Programming Options:  
Your unit’s digital control comes equipped with a 24-hour timer and two pre-  
programmed 7-day energy management options.  
Customizable schedules, with up to four temperature adjustments per day, can  
either be uploaded to the unit via the air conditioner’s built-in micro USB interface  
or conveniently transmitted wirelessly using the new FriedrichLink™ Adapter  
accessory, greatly simplifying the programming of one or multiple units.  
See Figure 7.  
24-Hour Timer  
The 24-hour timer allows you to turn the unit off and on at pre-set times by  
setting an on and off time on the unit control panel. (See page 11 for details on  
timer set-up.)  
Programming instructions.  
Pre-programmed Energy Management  
Your unit comes from the factory with two (2) Pre-programmed Energy  
Management settings are shown in Addendum 1 (Residential & Commercial  
Schedule Table).  
Energy Management Schedule Options are:  
1. Residential Schedule – 40 Hr. Work Week  
2. Commercial Schedule – 5-Day Business Week  
Figure 7  
FRR203  
9
FAN  
MODE  
AUTO FAN  
FAN MODE – The  
CONTNI UOUS  
button allows you to select between  
and  
Control Panel Operation Instructions  
SYSTEM  
modes.  
SYSTEM - The  
RIꢀRSHUDWLRQꢃ  
button allows you to sequentially select three modes  
AUTO FAN (No Cooling Demand)  
&22/ꢀꢀ  
+($7ꢀꢀ ꢀꢀ1RWꢀDYDLODEOHꢀRQꢀVRPHꢀPRGHOV  
)$1ꢀ21/<ꢀꢀ  
F
COOL MODE  
AUTO FAN  
79  
SET OP IN  
T
F
AUTO FAN  
FRR112  
74  
SET POINT  
AUTO FAN  
When in the  
mode, the fan only operates when the system has  
DꢀGHPDQGꢀWRꢀFRROꢀRUꢀKHDWꢀWKHꢀURRPꢁꢀ1RWHꢃꢀWKHꢀIDQꢀLVꢀRIIꢀꢇQRꢀIDQꢀVSHHGꢀLFRQꢈꢂꢀ  
indicating no command for cooling or heating.  
AUTO FAN (Cooling Demand)  
FRR103  
FRR104  
FRR105  
HEAT MODE  
F
AUTO FAN  
F
74  
AUTO FAN  
SET POINT  
68  
SET POINT  
FRR106  
System has a demand for cooling. The fan is operating at a medium speed.  
CONTINUOUS  
FAN ONLY MODE  
F
CONTINUOUS  
79  
SET POINT  
FRR113  
CONTINUOUS  
In the  
fan mode, the fan operates all the time. The system  
:KHQꢀLQꢀWKHꢀ&22/ꢀ ꢀRUꢀ+($7ꢀ ꢀRUꢀ)$1ꢀ21/<ꢀ mode, you can also  
VHOHFWꢀ)$1ꢀ02'(ꢂꢀ)$1ꢀ63(('ꢂꢀ7,0(5ꢀ6&+('8/(ꢂꢀ and . The  
6<67(0ꢀ02'(ꢀGRHVꢀQRWꢀFKDQJHꢁ  
SHULRGLFDOO\ꢀFRROVꢀRUꢀKHDWVꢀWKHꢀIDQꢐVꢀDLUÀRZꢀEXWꢀWKHꢀÀRZꢀRIꢀDLUꢀGRHVꢀQRWꢀVWRSꢁ  
FAN  
FAN SPEED - The SPEED ꢀEXWWRQꢀDOORZVꢀ\RXꢀWRꢀWRJJOHꢀEHWZHHQꢀIRXUꢀPRGHVꢀRIꢀRSHUDWLRQꢃꢀ/2:ꢂꢀ0(',80ꢂꢀ+,*+ꢀDQGꢀ$872ꢁ  
AUTO  
FRR095  
:KHQꢀIDQꢀVSHHGꢀ$872ꢀPRGHꢀꢇ6<67(0ꢀPRGHꢀ&22/ꢀRUꢀ+($7ꢈꢀLVꢀVHOHFWHGꢂꢀIDQꢀVSHHGꢀDXWRPDWLFDOO\ꢀYDULHVꢀGHSHQGLQJꢀRQꢀWKHꢀGLIIHUHQFHꢀEHWZHHQꢀWKHꢀXQLWꢐVꢀ  
VHWꢀSRLQWꢀRQꢀWKHꢀFRQWUROꢀSDQHOꢀDQGꢀWKHꢀDFWXDOꢀURRPꢀWHPSHUDWXUHꢁꢀ/HWꢀPHꢀH[SODLQꢁꢀ6D\ꢀIRUꢀH[DPSOHꢂꢀ\RX¶UHꢀZRUNLQJꢀLQꢀ\RXUꢀJDUDJHꢀDQGꢀ\RXꢀRSHQꢀWKHꢀELJꢀGRRUꢀIRUꢀ  
several minutes. The system will sense a wide difference between the set point and the actual room temperature. When this occurs, the system fan speed  
LQFUHDVHVꢀWRꢀ+,*+ꢀIRUꢀDꢀSHULRGꢀRIꢀWLPHꢁꢀ7KHꢀIDQꢀVSHHGꢀGHFUHDVHVꢂꢀLQꢀVWHSꢂꢀDVꢀWKHꢀWHPSHUDWXUHꢀGLIIHUHQFHꢀGHFUHDVHVꢁꢀ:KHQꢀWKHꢀURRPꢀWHPSHUDWXUHꢀPDWFKHVꢀWKHꢀ  
system's set point, fan speed returns to the original setting.  
ꢀꢁ  
The icon illuminates.  
UP and DOWN  
- arrows - Pressing either  
or button changes  
the system's set point (desired room temperature). These buttons are also  
used to make system parameter changes latter in this manual.  
7KHꢀ7,0(5ꢀIXQFWLRQꢀꢇRSWLRQꢀꢆꢂꢀV\VWHPꢀGHIDXOWꢈꢀDOORZVꢀ\RXꢀWRꢀGH¿QHꢀDꢀGDLO\ꢀ  
V\VWHPꢀ21ꢀDQGꢀ2))ꢀWLPHꢀZLQGRZꢁꢀ)RUꢀH[DPSOHꢂꢀ\RXꢀFDQꢀFRPPDQGꢀWKHꢀ  
V\VWHPꢀWRꢀWXUQꢀ21ꢀDWꢀꢑꢃꢆꢏꢀDPꢀDQGꢀWXUQꢀ2))ꢀDWꢀꢆꢃꢊꢋꢀSPꢀHYHU\GD\ꢁ  
7KHꢀ6&+('8/(ꢀIXQFWLRQꢀDOORZVꢀ\RXꢀWRꢀFKRRVHꢀHLWKHUꢀ5HVLGHQWLDOꢀꢇRSWLRQꢀ  
ꢍꢈꢀRUꢀ&RPPHUFLDOꢀꢇRSWLRQꢀꢊꢈꢁꢀ7KHꢀ5HVLGHQWLDOꢀDQGꢀ&RPPHUFLDOꢀRSWLRQVꢀDUHꢀ  
described latter in this manual.  
F
AUTO FAN  
OTHER FUNCTIONS  
74  
SET POINT  
Figure 8  
FRR100  
F
AUTO FAN  
FREIDRIC  
H
AIRDTINGCO.  
SAN  
75  
ANT NIO,  
TX  
SET POINT  
FRR097  
FRR101  
SET TIMEꢅꢀ7RꢀDGMXVWꢀWKHꢀXQLWꢐVꢀWLPHꢀSUHVVꢀDQGꢀKROGꢀWKHꢀ+285ꢀDQGꢀWKHꢀ0,1ꢀ  
EXWWRQVꢀIRUꢀWKUHHꢀVHFRQGVꢀꢇ5HIHUꢀWRꢀ)LJXUHꢀꢑꢈꢁ  
2QHꢀSUHVVꢀHTXDOVꢀꢆꢀGHJUHHꢀRIꢀFKDQJHꢁꢀ+ROGLQJꢀWKHꢀEXWWRQꢀGRZQꢀIRUꢀPRUHꢀ  
WKDQꢀꢋꢁꢉꢀVHFRQGVꢀVWDUWVꢀWKHꢀIDVWꢀLQFUHPHQWꢄGHFUHPHQWꢀFKDQJHꢀRIꢀWKHꢀVHWꢀ  
point.  
TIMER SCHEDULE - The  
SCHEDULE  
ꢀEXWWRQꢀDOORZVꢀ\RXꢀWRꢀVHOHFWꢀWKHꢀ7,0(5ꢀ  
or  
function.  
The  
ꢀEXWWRQꢀVHOHFWHGꢀGXULQJꢀDꢀGH¿QHGꢀ2))ꢀZLQGRZꢁ  
AM  
11  
FRR128  
The unit's current hour displays. Use the  
or ꢀEXWWRQVꢀWRꢀDGMXVWꢀWKHꢀ  
KRXUꢁꢀ7RꢀFKDQJHꢀIURPꢀ$0ꢀWRꢀ30ꢀFRQWLQXHꢀWRꢀLQFUHPHQWꢀꢇUROOꢈꢀWKHꢀGLVSOD\ꢁꢀ  
3UHVVꢀ7,0(5ꢀ6(7ꢀꢇ5HIHUꢀWRꢀ)LJXUHꢀꢑꢈꢀEXWWRQꢀWRꢀGLVSOD\ꢀWKHꢀXQLWꢐVꢀFXUUHQWꢀ  
minutes.  
FRR122  
The icon illuminates.  
The  
ꢀEXWWRQꢀVHOHFWHGꢀGXULQJꢀDꢀGH¿QHGꢀ21ꢀZLQGRZꢁ  
25  
F
AUTO FAN  
79  
FRR129  
SET POINT  
Use the  
or ꢀEXWWRQVꢀWRꢀDGMXVWꢀWKHꢀPLQXWHVꢁꢀ7KHꢀFORFNꢀLVꢀQRZꢀVHWꢀ  
IRUꢀꢆꢆꢃꢍꢏꢀ$0ꢁꢀ3UHVVꢀ7,0(5ꢀ6(7ꢀꢇ5HIHUꢀWRꢀ)LJXUHꢀꢑꢈꢀEXWWRQꢀWRꢀGLVSOD\ꢀWKHꢀ  
unit's day setting.  
FRR123  
ꢀꢀ  
4
C
FRR130  
FRR134  
Use the or ꢀEXWWRQVꢀWRꢀDGMXVWꢀWKHꢀGD\ꢀꢇꢆꢀWRꢀꢒꢈꢁꢀ7KHꢀGD\ꢀVHWWLQJꢀLVꢀXSꢀ  
to the you the user. If you set the current day = 1, and today is Tuesday,  
$ꢀ³&´ꢀZLOOꢀÀDVKꢀIRUꢀꢏꢀVHFRQGVꢀDQGꢀWKHQꢀUHYHUWꢀWRꢀDꢀQRUPDOꢀGLVSOD\ꢁ  
WKHQꢀ'D\ꢀꢆꢀ ꢀ7XHVGD\ꢁ  
C
AUTO FAN  
F
AUTO FAN  
26  
SET POINT  
79  
SET POINT  
FRR135  
7KHꢀž)ꢀLFRQꢀJRHVꢀDZD\ꢀDQGꢀWKHꢀž&ꢀLFRQꢀLOOXPLQDWHVꢀRQꢀWKHꢀQRUPDOꢀGLVSOD\ꢁ  
FRR131  
3UHVVꢀ7,0(5ꢀ6(7ꢀꢇ5HIHUꢀWRꢀ)LJXUHꢀꢑꢈꢀEXWWRQꢀWRꢀH[LWꢀDQGꢀVDYHꢀWKHꢀ6(7ꢀ  
7,0(ꢀIXQFWLRQꢁꢀ7KHꢀ7,0(5ꢀ6(7ꢀEXWWRQꢀPXVWꢀEHꢀSUHVVHGꢀZLWKLQꢀꢆꢏꢀVHFRQGꢁꢀ  
%XWWRQꢀLQDFWLYLW\ꢀIRUꢀPRUHꢀWKDQꢀꢆꢏꢀVHFRQGVꢀFDXVHVꢀWKHꢀGLVSOD\ꢀWRꢀWLPHꢀRXWꢀ  
and return to the normal operating display.  
DIM Function  
7KHUHꢀDUHꢀWKUHHꢀVHSDUDWHꢀGLVSOD\ꢀEULJKWQHVVꢀOHYHOVꢂꢀ$872ꢂꢀꢍꢋꢎꢀDQGꢀIXOOꢀ  
ꢇꢆꢋꢋꢎꢈꢁ7RFKDQJHWKH',0VHWWLQJꢂSUHVVWKH3RZHUEXWWRQIRUWKUHHꢀ  
seconds.  
ºF - ºC Select  
F
AUTO FAN  
1
79  
SET POINT  
FRR192  
FRR132  
7KHꢀꢆꢀLQGLFDWHVꢀDꢀ',0ꢀVHWWLQJꢀRIꢀ$XWRꢀꢇIDFWRU\ꢀGHIDXOWꢈꢁꢀ8VHꢀWKHꢀ or  
buttons to change the setting.  
7RVZLWFKꢀIURPꢀGHJUHHVꢀ)DKUHQKHLWꢀꢇ)ꢈꢀWRꢀ&HOVLXVꢀꢇ&ꢈꢂꢀSUHVVꢀꢀ  
buttons for three seconds.  
or  
2
f
FRR193  
FRR133  
7KHꢀꢍꢀLQGLFDWHVꢀDꢀ',0ꢀVHWWLQJꢀRIꢀꢍꢋꢎꢁꢀ3UHVVꢀWKHꢀ7,0(5ꢀ6(7ꢀEXWWRQꢀZLWKLQꢀ  
ꢆꢏꢀVHFRQGVꢀWRꢀVDYHꢀWKHꢀVHWWLQJꢁꢀ%XWWRQꢀLQDFWLYLW\ꢀIRUꢀPRUHꢀWKDQꢀꢆꢏꢀVHFRQGVꢀ  
causes the display to time out and return to the normal operating display.  
$ꢀ³)´ꢀZLOOꢀÀDVKꢀIRUꢀꢏꢀVHFRQGVꢀDQGꢀWKHQꢀUHYHUWꢀWRꢀDꢀQRUPDOꢀGLVSOD\ꢁꢀ7RꢀFKDQJHꢀ  
IURPꢀ)ꢀWRꢀ&ꢂꢀSUHVVꢀWKH  
or  
button within 5 seconds.  
ꢀꢂ  
This means there is a compressor demand but the system is not ready  
IRUꢀWKHꢀFRPSUHVVRUꢀWRꢀRSHUDWHꢁꢀ)RUꢀH[DPSOHꢀDꢀVKRUWꢀSRZHUꢀRXWDJHꢂꢀWKHꢀ  
compressor will not restart until the internal pressures of the compressor  
are at the proper level.  
3
F
FRR194  
7KHꢀꢊꢀLQGLFDWHVꢀDꢀ',0ꢀVHWWLQJꢀRIꢀꢆꢋꢋꢎꢀꢇIXOOꢀEULJKWQHVVꢈꢁꢀ3UHVVꢀWKHꢀ7,0(5ꢀ  
6(75HIHUWR)LJXUHEXWWRQZLWKLQVHFRQGVWRVDYHWKHVHWWLQJꢁꢀ  
%XWWRQꢀLQDFWLYLW\ꢀIRUꢀPRUHꢀWKDQꢀꢆꢏꢀVHFRQGVꢀFDXVHVꢀWKHꢀGLVSOD\ꢀWRꢀWLPHꢀRXWꢀ  
and return to the normal operating display.  
FRR179  
,IꢀWKHꢀURRPꢀIUHH]HꢀSURWHFWLRQꢀLVꢀDFWLYHꢂꢀWKHꢀGLVSOD\ꢀLQGLFDWHVꢀWKLVꢀE\ꢀVKRZLQJꢀ  
ꢓ)´ꢁꢀ2QFHꢀWKHꢀFRQGLWLRQꢀLVꢀVDWLV¿HGꢂꢀWKHꢀ³)´ꢀGLVSOD\ꢀLVꢀUHPRYHGꢁꢀ3UHVVꢀ7,0(5ꢀ  
6(7ꢀꢇ)LJXUHꢀꢑꢈꢀEXWWRQꢀRYHUULGHVꢀWKHꢀIUHH]HꢀSURWHFWLRQꢀDOHUWꢀIRUꢀꢏꢀPLQXWHVꢁ  
Alerts  
CHECK  
:KHQꢀWKHꢀ¿OWHUꢀQHHGVꢀWRꢀEHꢀFOHDQHGꢀRUꢀUHSODFHGꢂꢀWKHꢀ FILTER icon displays.  
This alert appears when the room is too cold for the air conditioner to  
RSHUDWHꢀSURSHUO\ꢁꢀ$QRWKHUꢀFDXVHꢀRIꢀDOHUWꢀRFFXUVꢀZKHQꢀWRꢀPXFKꢀLFHꢀEXLOGVꢀ  
up on the unit's condenser.  
Lock Control Panel  
F
AUTO FAN  
FAN  
To lock the front panel controls, press and hold the  
for 3 seconds. The lock icon  
SPEED  
+
illuminates to indicate the locked status.  
buttons  
79  
SET POINT  
FILTER  
FRR118  
F
FAN  
MODE  
AUTO FAN  
The alert can be dismissed by pressing the  
and  
for 3 seconds.  
79  
When maintenance is required, a service icon  
appears on screen.  
SET POINT  
FRR116  
F
FAN  
SPEED  
To unlock, presses and hold the  
+
buttons for 3 seconds.  
AUTO FAN  
79  
SET POINT  
F
AUTO FAN  
FRR119  
79  
This ꢀZLOOꢀUHPDLQꢀRQꢀWKHꢀGLVSOD\ꢀXQWLOꢀWKHꢀIDXOWꢀKDVꢀEHHQꢀFRUUHFWHGꢁꢀ1RWHꢃꢀ  
the ꢀLFRQꢀZLOOꢀÀDVKꢀLIꢀWKHꢀIDXOWꢀLVꢀRIꢀDꢀPRUHꢀVHYHULW\ꢀQDWXUHꢁ  
SET POINT  
The wait icon illuminates when the compressor lockout is active.  
FRR117  
The lock icon  
disappears to indicate unlocked status.  
F
AUTO FAN  
79  
SET POINT  
FRR120  
ꢀꢃ  
External Control Status  
3. Commercial Schedule - When selected the unit follows a pre-  
programmed set of operational parameters that covers 7 days of  
the week with 2 time windows during each day. Each time window  
KDVꢀLWꢐVꢀRZQꢀVHWꢀRIꢀꢑꢀRSHUDWLQJꢀSDUDPHWHUVꢁꢀ5HIHUꢀWRꢀ$GGHQGXPꢀ  
ꢆꢁꢀ7RꢀPDNHꢀDꢀFKDQJHꢀWRꢀWKHꢀꢆꢔꢀWLPHꢀZLQGRZVꢀUHIHUꢀWRꢀ$GYDQFHGꢀ  
Programming section of this manual.  
$MART  
The  
remotely.  
icon illuminates to indicate that the system is being controlled  
F
AUTO AF  
N
79  
SETPOIN  
T
$MART  
1
SCHEDULE  
FRR125  
FRR137  
To change the  
button for 3 sec.  
ꢀVHOHFWLRQꢂꢀSUHVVꢀDQGꢀKROGꢀWKHꢀ7,0(5ꢄ6&+('8/(ꢀ  
F
AUTO FAN  
If the Schedule function is available, the system displays the icon +  
SCHEDULE  
icon. The display indicates the schedule function that is active.  
79  
To change to an alternate schedule (2 or 3), press the  
If the Schedule function is not available, the Timer icon shows without  
or  
button.  
SET POINT  
SCHEDULE  
the  
icon.  
7RꢀVDYHꢀDQGꢀH[LWꢀWKLVꢀVHOHFWLRQꢂꢀSUHVVꢀWKHꢀ7,0(5ꢀ6(7ꢀEXWWRQꢀꢇ)LJXUHꢀꢑꢈꢁ  
FRR126  
If there is no button activity for 15 seconds, the function will time out and  
OHDYHꢀWKHꢀRULJLQDOꢀVHOHFWLRQꢁꢀ2QFHꢀWKHꢀVHOHFWLRQꢀLVꢀVDYHGꢀRUꢀWLPHGꢀRXWꢂꢀWKHꢀ  
display reverts to the normal display.  
The  
connection.  
icon illuminates to indicate that the system is receiving a Wi-Fi  
ADVANCED FUNCTIONS  
/HWꢀPHꢀSXWꢀLQꢀSODLQꢀZRUGVꢀPDQ\ꢀRIꢀ\RXUꢀXQLWꢐVꢀDGYDQFHGꢀIXQFWLRQVꢀꢇ7LPHUꢂꢀ  
Schedule, Error Mode, Test Mode, and Maintenance Menu). The functions  
mentioned in the following section may or may not be available depending  
on the air conditioner model.  
2
Timer/Schedule Select  
SCHEDULE  
FRR138  
F
AUTO FAN  
$IWHUꢀSUHVVLQJꢀWKHꢀ  
or  
button, within 15 second of pressing the  
EXWWRQꢀIRUꢀꢊꢀVHFRQGVꢂꢀWKHꢀGLVSOD\ꢀLQGLFDWHVꢀDꢀFKDQJHꢀWRꢀ7LPHUꢄ6FKHGXOHUꢀ  
ꢍꢁꢀ7RꢀVDYHꢀDQGꢀH[LWꢀWKLVꢀVHOHFWLRQꢂꢀSUHVVꢀWKHꢀ7,0(5ꢀ6(7ꢀEXWWRQꢀꢇ)LJXUHꢀꢑꢈꢁ  
79  
SET POINT  
FRR136  
F
7KHꢀFRQWUROꢀV\VWHPꢀKDVꢀWKUHHꢀ7LPHUꢄ6FKHGXOHꢀIXQFWLRQVꢃ  
AUTO FAN  
1. Timer (factory default) ꢅꢀ$OORZVꢀ\RXꢀWRꢀFRPPDQGꢀWKHꢀXQLWꢀWRꢀWXUQꢀ  
21ꢀDQGꢀ2))ꢀDWꢀWLPHꢀ\RXꢀSURJUDPꢀZLWKLQꢀDꢀꢒꢀGD\ꢀZLQGRZꢁꢀ6HWWLQJꢀ  
the start, stop and day window can be found latter in this manual.  
79  
SET POINT  
2. Residential Schedule - When selected the unit follows a pre-  
programmed set of operational parameters that covers 7 days of  
the week with 4 time windows during each day. Each time window  
KDVꢀLWꢐVꢀRZQꢀVHWꢀRIꢀꢑꢀRSHUDWLQJꢀSDUDPHWHUVꢁꢀ5HIHUꢀWRꢀ$GGHQGXPꢀ  
ꢆꢁꢀ7RꢀPDNHꢀDꢀFKDQJHꢀWRꢀWKHꢀꢍꢑꢀWLPHꢀZLQGRZVꢀUHIHUꢀWRꢀ$GYDQFHGꢀ  
Programming section of this manual.  
FRR136  
The display reverts to the normal display.  
ꢀꢄ  
F
AUTO FAN  
79  
SET POINT  
FRR139  
FRR143  
The display returns to normal once the settings are saved.  
1RZꢀWKHꢀQH[WꢀWLPHꢀWKHꢀ  
button is pressed the system operates in the  
mode (1, 2 or 3) you programmed.  
Timer Stop Time  
Modify the TIMER Function  
Timer Start Time  
F
AUTO FAN  
F
79  
SET POINT  
AUTO FAN  
79  
SET POINT  
FRR144  
7KHꢀGLVSOD\ꢀVKRZVꢀDꢀQRUPDOꢀV\VWHPꢁꢀ3UHVVꢀDQGꢀKROGꢀWKHꢀ0,1ꢀEXWWRQꢀꢇ)LJXUHꢀ  
ꢑꢈꢀIRUꢀꢊꢀVHFRQGVꢁꢀ1RWHꢀWKHꢀ7LPHUꢀVWDUWꢀꢅꢀVWRSꢀWLPHVꢀPD\ꢀEHꢀVHWꢀHYHQꢀZKHQꢀ  
the system is in the Schedule mode.  
FRR140  
7KHꢀGLVSOD\ꢀVKRZVꢀDꢀQRUPDOꢀV\VWHPꢁꢀ3UHVVꢀDQGꢀKROGꢀWKHꢀ+285ꢀEXWWRQꢀ  
ꢇ)LJXUHꢀꢑꢈꢀIRUꢀꢊꢀVHFRQGVꢁꢀ1RWHꢀWKHꢀ7LPHUꢀVWDUWꢅVWRSꢀWLPHVꢀPD\ꢀEHꢀVHWꢀHYHQꢀ  
when the system is in the Schedule mode.  
AM  
11  
OFF  
AM  
4
ON  
FRR145  
Use the  
or ꢀEXWWRQꢀWRꢀDGMXVWꢀWKHꢀKRXUꢁꢀ3UHVVꢀWKHꢀ7,0(5ꢀ6(7ꢀEXWWRQꢀ  
ꢇ)LJXUHꢀꢑꢈꢀWRꢀDGMXVWꢀWKHꢀPLQXWHVꢁ  
FRR141  
Use the  
or ꢀEXWWRQꢀWRꢀDGMXVWꢀWKHꢀKRXUꢁꢀ3UHVVꢀWKHꢀ7,0(5ꢀ6(7ꢀEXWWRQꢀ  
ꢇ)LJXUHꢀꢑꢈꢀWRꢀDGMXVWꢀWKHꢀPLQXWHVꢁ  
55  
OFF  
21  
ON  
FRR146  
Use the  
or ꢀEXWWRQꢀWRꢀDGMXVWꢀWKHꢀPLQXWHVꢁꢀ3UHVVꢀWKHꢀ7,0(5ꢀ6(7ꢀ  
FRR142  
EXWWRQꢀꢇ)LJXUHꢀꢑꢈꢀZLWKLQꢀꢆꢏꢀVHFRQGVꢀWRꢀH[LWꢀDQGꢀVDYHꢀWKHꢀVHWWLQJꢁꢀ7KHꢀWLPHUꢀ  
LVꢀQRZꢀVHWꢀWRꢀVWRSꢀDWꢀꢆꢆꢃꢏꢏꢀ$0ꢁꢀ  
Use the  
or ꢀEXWWRQꢀWRꢀDGMXVWꢀWKHꢀPLQXWHVꢁꢀ3UHVVꢀWKHꢀ7,0(5ꢀ6(7ꢀ  
EXWWRQꢀꢇ)LJXUHꢀꢑꢈꢀZLWKLQꢀꢆꢏꢀVHFRQGVꢀWRꢀH[LWꢀDQGꢀVDYHꢀWKHꢀVHWWLQJꢁꢀ7KHꢀWLPHUꢀ  
LVꢀQRZꢀVHWꢀWRꢀVWDUWꢀDWꢀꢔꢃꢍꢆꢀ$0ꢁ  
ꢀꢅ  
F
F
AUTO FAN  
AUTO FAN  
79  
79  
SET POINT  
SET POINT  
SCHEDULE  
FRR147  
FRR151  
The display returns to normal once the settings are saved.  
The Timer ꢀLFRQꢀꢀVWRSVꢀEOLQNLQJꢀDIWHUꢀꢊꢀVHFRQGVꢁꢀ<RXꢀPXVWꢀWXUQꢀWKHꢀDFWLYHꢀ  
7LPHUꢀRUꢀ6FKHGXOHꢀPRGHꢀ2))ꢀEHIRUHꢀPDNLQJꢀFKDQJHVꢁꢀ2QFHꢀWKHꢀFKDQJHVꢀ  
Timer - Scheduler Control Block  
are made, press the  
button to re-activate Timer or Schedule mode.  
F
F
AUTO FAN  
AUTO FAN  
79  
SET POINT  
79  
SCHEDULE  
SET POINT  
FRR148  
FRR152  
,IꢀWKHꢀXQLWꢀLVꢀRSHUDWLQJꢀLQꢀWKHꢀ7,0(5ꢀRUꢀ6&+('8/(ꢀPRGHꢂꢀDQGꢀWKHQꢀ\RXꢀ  
Schedule ON Scenarios  
SUHVVꢀDQ\ꢀEXWWRQꢀH[FHSWꢀWKHꢀ  
button, the Timer  
icon begins to  
EOLQNꢁꢀ$OOꢀEXWWRQꢀDFWLRQꢀLVꢀEORFNHGꢁ  
F
AUTO FAN  
SCHEDULE  
79  
SET POINT  
SCHEDULE  
FRR153  
The display shows a normal system.  
,IꢀWKHꢀ6FKHGXOHꢀIXQFWLRQꢀLVꢀWXUQHGꢀ21ꢀGXULQJꢀQRUPDOꢀRSHUDWLRQꢂꢀWKHꢀ  
FRR149  
SCHEDULE  
The Timer ꢀLFRQꢀꢀVWRSVꢀEOLQNLQJꢀDIWHUꢀꢊꢀVHFRQGVꢁꢀ<RXꢀPXVWꢀWXUQꢀWKHꢀDFWLYHꢀ  
and Timer  
current period schedule parameters.  
icons illuminates. The control system immediately runs the  
7LPHUꢀRUꢀ6FKHGXOHꢀPRGHꢀ2))ꢀEHIRUHꢀPDNLQJꢀFKDQJHVꢁꢀ2QFHꢀWKHꢀFKDQJHVꢀ  
are made, press the  
button to re-activate Timer or Schedule mode.  
,IꢀWKHꢀXQLWꢀLVꢀRSHUDWLQJꢀLQꢀWKHꢀ7,0(5ꢀRUꢀ6&+('8/(ꢀPRGHꢂꢀDQGꢀWKHQꢀ\RXꢀ  
SUHVVꢀDQ\ꢀEXWWRQꢀH[FHSWꢀWKHꢀ  
button, the Timer icon begins to blink.  
F
AUTO FAN  
79  
F
SET POINT  
AUTO FAN  
79  
SET POINT  
FRR154  
The display shows a normal system.  
FRR150  
$OOꢀEXWWRQꢀDFWLRQꢀLVꢀEORFNHGꢁ  
ꢀꢆ  
F
F
AUTO FAN  
AUTO FAN  
79  
79  
SET POINT  
SET POINT  
SCHEDULE  
FRR159  
FRR155  
SCHEDULE  
,IꢀWKHꢀ6FKHGXOHꢀIXQFWLRQꢀLVꢀWXUQHGꢀ21ꢀGXULQJꢀDꢀ6NLSꢀSHULRGꢂꢀWKHꢀ  
and Timer  
previous (non-skip) period schedule parameters.  
,IꢀWKHꢀ7LPHUꢀIXQFWLRQꢀLVꢀWXUQHGꢀ21ꢀGXULQJꢀWKHꢀ21ꢀWLPHꢂꢀWKHꢀ7LPHUꢀ icon  
illuminates. The control system continues to run.  
icons illuminates. The control system immediately runs the  
Scheduler OFF Scenarios  
Timer ON Scenarios  
F
F
AUTO FAN  
AUTO FAN  
79  
SET POINT  
79  
SCHEDULE  
SET POINT  
FRR160  
FRR156  
The display shows the unit in Schedule mode.  
The display shows a normal system.  
F
AUTO FAN  
79  
SET POINT  
FRR161  
FRR157  
,IWKH7LPHUIXQFWLRQLVWXUQHG21GXULQJWKH2IIWLPHꢂWKHꢀ  
LOOXPLQDWHVꢁꢀ7KHꢀFRQWUROꢀV\VWHPꢀLPPHGLDWHO\ꢀWXUQVꢀWKHꢀXQLWꢀ2))  
icon  
,IꢀWKHꢀ6FKHGXOHꢀIXQFWLRQꢀLVꢀWXUQHGꢀ2))ꢀGXULQJꢀDQꢀDFWLYHꢀVWDWHꢀꢇQRWꢀRIIꢈꢂꢀWKHꢀ  
SCHEDULE  
Timer and  
The display shows a normal system.  
icons turn off. The control stays in the current state.  
F
AUTO FAN  
79  
SET POINT  
SCHEDULE  
FRR158  
The display shows a normal system.  
FRR162  
7KHꢀGLVSOD\ꢀVKRZVꢀWKHꢀXQLWꢀLQꢀ6FKHGXOHꢀPRGHꢀGXULQJꢀDQꢀLQꢅDFWLYHꢀꢇ2))ꢈꢀ  
period.  
ꢀꢇ  
F
F
AUTO FAN  
AUTO FAN  
79  
79  
SET POINT  
SET POINT  
FRR163  
FRR167  
,IꢀWKHꢀ7LPHUꢀIXQFWLRQꢀLVꢀWXUQHGꢀ2))ꢀGXULQJꢀDQꢀLQꢅDFWLYHꢀꢇ2))ꢈꢀSHULRGꢂꢀWKHꢀ  
Timer icon turns off. The display shows a normal system.  
,IꢀWKHꢀ6FKHGXOHꢀIXQFWLRQꢀLVꢀWXUQHGꢀ2))ꢀGXULQJꢀDQꢀLQꢅDFWLYHꢀꢇ2))ꢈꢀSHULRGꢂꢀ  
SCHEDULE  
the Timer and  
known non-schedule state.  
icons turn off. The unit wakes up in the last  
F
AUTO FAN  
F
AUTO FAN  
79  
SET POINT  
79  
SET POINT  
SCHEDULE  
FRR168  
,IꢀWKHꢀ7LPHUꢀIXQFWLRQꢀLVꢀWXUQHGꢀ2))ꢀGXULQJꢀWKHꢀ21ꢀWLPHꢁꢀ7KHꢀ7LPHUꢀ icon  
turns off. The control stays in the current state.  
FRR164  
,IꢀWKHꢀ6FKHGXOHꢀIXQFWLRQꢀLVꢀWXUQHGꢀ2))ꢀGXULQJꢀDꢀ6NLSꢀSHULRGꢂꢀWKHꢀ and  
icons turn off. The unit wakes up in the last known non-schedule  
state.  
SCHEDULE  
F
AUTO FAN  
79  
F
SET POINT  
AUTO FAN  
79  
SET POINT  
FRR169  
The display shows a normal system.  
FRR165  
The display shows a normal system.  
Timer OFF Scenarios  
FRR166  
7KHꢀGLVSOD\ꢀVKRZVꢀWKHꢀXQLWꢀLQꢀ7LPHUꢀPRGHꢀGXULQJꢀDQꢀLQꢅDFWLYHꢀꢇ2))ꢈꢀSHULRGꢁ  
ꢀꢈ  
FAN SPEED Button - Used to sequentially select new fan speed, plus  
FAN  
Remote Control Operation  
Remote Controlꢀꢅꢀ5HIHUꢀWRꢀ)LJXUHVꢀꢆꢋꢀDQGꢀꢆꢆꢀGXULQJꢀRSHUDWLRQꢀGHVFULSWLRQꢁ  
Getting Startedꢀꢅꢀ,QVWDOOꢀWZRꢀꢇꢍꢈꢀ$$$ꢀEDWWHULHVꢀLQꢀWKHꢀEDWWHU\ꢀFRPSDUWPHQWꢀ  
located on the back of the unit.  
$872ꢀRSHUDWLRQꢁꢀ:KHQꢀWKHꢀ SPEED button is pressed, the fan speed icon  
(triangle) changes to indicate the new speed level. Fan speed automatically  
varies depending on the set temperature on the control panel and the actual  
URRPꢀWHPSHUDWXUHꢁꢀꢀ)RUꢀH[DPSOHꢀLIꢀWKHUHꢀLVꢀDꢀELJꢀGLIIHUHQFHꢀEHWZHHQꢀ\RXUꢀ  
set temperature and the actual room temperature, the system fan speed  
LQFUHDVHVꢀWRꢀ+,*+ꢁꢀꢀ,WꢀUHPDLQVꢀDWꢀWKLVꢀVSHHGꢀXQWLOꢀWKHꢀURRPꢀWHPSHUDWXUHꢀ  
matches the set temperature.  
Operation - The remote control should be within 25 feet of the air  
FRQGLWLRQHUꢀIRUꢀRSHUDWLRQꢁꢀꢀꢇ5HIHUꢀWRꢀ)LJXUHꢀꢕꢀIRUꢀHIIHFWLYHQHVVꢈꢁꢀ3UHVVꢀWKHꢀ  
power button to turn the remote on. The remote will automatically power  
off after 15 seconds if the buttons are not being pressed. The remote must  
be on to control the unit.  
SCHEDULE  
SCHEDULE Button – The  
on and off. Press the Schedule button once to turn on the Schedule  
button turns the schedule function  
ꢇ5HVLGHQWLDOꢂꢀ&RPPHUFLDOꢂꢀ7LPHUꢂꢀRUꢀ&XVWRPL]HGꢈꢀWKDWꢀKDVꢀDOUHDG\ꢀEHHQꢀ  
SCHEDULE  
selected on your unit. Pressing the  
the schedule function off.  
button a second time turns  
POWER Button - Turns remote and unit on and off.  
SYSTEM Button$OORZVWKHXVHUWRVHTXHQWLDOO\VHOHFWꢂ&RROꢀ  
,
UP and DOWN Arrows - Pressing either the  
(UP) or  
ꢀꢇ'2:1ꢈꢀ  
+($7ꢀ ꢂꢀDQGꢀ)$1ꢀ21/<ꢀ operation. When the button is pressed, the  
display indicates which mode has been selected via a display message.  
1RWHWKDWZKHQWKHKHDWLQJIXQFWLRQLVQRWDYDLODEOHꢂWKHV\VWHPZLOOꢀ  
DXWRPDWLFDOO\ꢀVNLSꢀWKHꢀ+($7ꢀPRGHꢁ  
button changes the desired room temperature. The factory preset lower  
and upper limits are 60ƒ)ꢀꢇꢆꢉƒ&ꢈꢀDQGꢀꢕꢕƒ)ꢀꢇꢊꢒƒ&ꢈꢁꢀꢀ7KHVHꢀEXWWRQVꢀDUHꢀDOVRꢀ  
used to navigate between function options when using the User Menu or  
Maintenance Mode.  
CONTINUOUS  
FAN MODE Button - Selects between automatic ( AUTO FAN ) or  
AUTO FAN  
operation. In the  
compressor operates or the heat function is enabled.  
mode, the fan only turns on and off when the  
Remote Effectiveness  
Hand Held Remote - Has an operating range of up to 25 ft. The infrared  
remote control signal must have a clear path to transmit the command to  
the air conditioning unit. The remote signal has some ability to "bounce"  
off of walls and furniture similar to a television remote control. The diagram  
below shows the typical operating range of the control in a standard room  
with 8 ft high ceilings.  
AUTO FAN  
NOTE:  
ꢀLVꢀQRWꢀDYDLODEOHꢀLQꢀWKHꢀ)$1ꢀ21/<0RGHꢂꢀWKHꢀGLVSOD\ꢀ  
CONTINUOUS CONTINUOUS  
indicates . In the  
determined by your selection on the  
mode, fan speed is  
button.  
FAN  
SPEED  
Figure 9  
TOP VIEW  
25ft  
25ft  
7.5ft  
4ft  
60°  
60°  
SIDE VIEW  
6ft  
30°  
45°  
60°  
60°  
45°  
45°  
8ft  
25ft  
30°  
30°  
45°  
30°  
16ft  
8ft  
25ft  
25ft  
25ft  
25ft  
25ft  
FRR080  
ꢀꢉ  
Figure 10  
DISPLAY  
AUTO FAN  
CONTINUOUS  
88  
AUTO  
C
F
SYSTEM  
FAN MODE  
POWER  
SYSTEM  
FAN MODE  
POWER  
TEMPERATURE  
UP  
TEMPERATURE  
DOWN  
FAN SPEED  
SCHEDULE  
SCHEDULE  
FAN SPEED  
FRR081  
Figure 11  
FAN ONLY  
ICON  
COOL  
ICON  
HEAT  
ICON  
SYSTEM  
MODE  
AUTO FAN  
CONTINUOUS  
FAN  
MODE  
88  
AUTO  
FAN  
SPEED  
C F  
°F / °C  
ICONs  
SCHEDULE  
ICON  
FRR082  
20  
Figure 12  
$LUÁRZꢀ6HOHFWLRQꢀDQGꢀ$GMXVWPHQW  
LEFT AIRFLOW  
LEVER  
RIGHT AIRFLOW  
LEVER  
$LUꢀÁRZꢀGLUHFWLRQꢀDGMXVWPHQW  
7KHꢀDLUÀRZꢀSDWKꢀPD\ꢀEHꢀDGMXVWHGꢀWRꢀGLVWULEXWHꢀDLUꢀLQGHSHQGHQWO\ꢀIURPꢀWKHꢀ  
left or right side of the discharge opening. Each of the banks of louvers  
can be directed left, right, up or down in order to achieve the most optimum  
DLUÀRZꢀSRVLWLRQLQJꢁ  
7RꢀDGMXVWꢀDLUÀRZꢀGLUHFWLRQꢀJUDEꢀWKHꢀOHYHUꢀLQꢀWKHꢀFHQWHUꢀRIꢀWKHꢀORXYHUꢀEDQNꢀDQGꢀ  
move it in the direction that you would like the air to be directed. Please  
QRWHꢀWKDWꢀLWꢀLVꢀQRUPDOꢀWKDWꢀDLUÀRZꢀPD\ꢀEHꢀVWURQJHUꢀRXWꢀRIꢀRQHꢀVLGHꢀRIꢀWKHꢀ  
louvers than the other.  
FRR083  
Installation Instructions  
NOTE: This section includes installation instructions for window mount  
DQGWKUXꢅWKHꢅZDOOPRXQWPHWKRGVꢁ.DOKHDWꢄFRROXQLWVDUHꢀ  
designed for permanent thru-the-wall installation. Mounting the  
unit in a window will require a window accessory kit, available  
through your Friedrich dealer.  
IMPORTANT:ꢀꢀ%HIRUHꢀ\RXꢀEHJLQꢀWKHꢀDFWXDOꢀLQVWDOODWLRQꢀRIꢀWKHꢀDLUꢀFRQGLWLRQHUꢂꢀ  
EHꢀVXUHꢀ\RXUꢀHOHFWULFDOꢀUHTXLUHPHQWVꢀDUHꢀDVꢀGHVFULEHGꢀEHORZꢁꢀ&RQVXOWꢀDQꢀ  
electrical professional as necessary to insure home wiring is per local  
electrical codes.  
CIRCUIT PROTECTION±$QRYHUORDGHGFLUFXLWZLOOLQYDULDEO\FDXVHꢀ  
malfunction or failure of an air conditioner, therefore, it is necessary that the  
HOHFWULFDOꢀSURWHFWLRQꢀLVꢀDGHTXDWHꢁꢀ'XHꢀWRꢀPRPHQWDU\ꢀKLJKꢀFXUUHQWꢀGHPDQGꢀ  
ZKHQꢀ\RXUꢀDLUꢀFRQGLWLRQHUꢀLVꢀVWDUWHGꢂꢀXVHꢀDꢀꢓ7,0(ꢀ'(/$<ꢓꢀIXVHꢀRUꢀDꢀ+$&5ꢀ  
W\SHꢀFLUFXLWꢀEUHDNHUꢁꢀ&RQVXOWꢀ\RXUꢀGHDOHUꢀRUꢀSRZHUꢀFRPSDQ\ꢀLIꢀLQꢀGRXEWꢁ  
WARNING  
<RXUꢀDLUꢀFRQGLWLRQHUꢀPXVWꢀEHꢀFRQQHFWHGꢀWRꢀDꢀSRZHUꢀVXSSO\ꢀZLWKꢀWKHꢀVDPHꢀ  
$ꢁ&ꢁꢀYROWDJHꢀDQGꢀKHUW]ꢀDVꢀPDUNHGꢀRQꢀWKHꢀXQLWꢀQDPHSODWHꢁꢀ2QO\ꢀDOWHUQDWLQJꢀ  
FXUUHQWꢀꢇ$ꢁ&ꢁꢈꢂꢀQRꢀGLUHFWꢀFXUUHQWꢀꢇ'ꢁ&ꢁꢈꢂꢀFDQꢀEHꢀXVHGꢁꢀ  
Electrical Shock Hazard  
Make sure your electrical receptacle has the  
same configuration as your air conditioner’s  
plug. If different, consult a Licensed Electrician.  
The power cord has a plug with a grounding prong of approved type and a  
PDWFKLQJꢀSOXJꢀUHFHSWDFOHꢀZLWKꢀJURXQGꢀLVꢀUHTXLUHGꢁꢀ5HIHUꢀWRꢀSDJHꢀꢉꢀIRUꢀWKHꢀ  
correct type of plug receptacle for your model.  
Do not use plug adapters.  
Do not use an extension cord.  
Do not remove ground prong.  
Always plug into a grounded 3 prong oulet.  
Failure to follow these instructions can result in  
death, fire, or electrical shock.  
READ THIS FIRST! Electrical Requirements  
ꢂꢀ  
Items required for installation (provided in straight cooling units only)  
ITEM NO  
DESCRIPTION  
QTY.  
ITEM NO  
DESCRIPTION  
QTY.  
1
2
3
4
8
4
7
8
LEFT SIDE CURTAIN ASSEMBLY  
RIGHT SIDE CURTAIN ASSEMBLY  
1
1
SCREW, SHEET METAL, #8 x  
"
SCREW, PHILLIPS, TRUSS HEAD, #8 x ½"  
10  
2
SCREW, HEX, #8 x  
"
9
CABINET OR SLEEVE w/ TOP ANGLE BAR  
(TOP ANGLE BAR NOT INCLUDED ON EQ)  
AIR CONDITIONING UNIT w/ DECORATIVE  
FRONT PANEL  
1
1
1
SCREW, PHILLIPS, #8 x 1 ¼"  
5
6
GRAY GASKET, FOAM, 1" x 1 ½" x 42"  
WHITE GASKET, FOAM, 1" x 1 ½" x 48"  
1
1
10  
ITEM #6  
ITEM #1  
ITEM #2  
ITEM #4  
ITEM #3  
ITEM #5  
ITEM #7  
ITEM #10  
ITEM #9  
ITEM #8  
ITEMS NOT TO SCALE  
FRR084  
Recommended tools required for installation: (not included)  
HEXHEAD SCREWDRIVER  
COMMON SCREWDRIVER  
PHILLIPS SCREWDRIVER  
22  
STEP 3.  
STEP 4.  
&HQWHUꢀFDELQHWꢀLQꢀZLQGRZꢀZLWKꢀVLOOꢀFKDQQHOꢀSRVLWLRQHGꢀDJDLQVWꢀ  
ZLQGRZꢀVWRROꢀDVꢀVKRZQꢀLQꢀ)LJXUHꢀꢆꢏꢂꢀ6HFWLRQꢀ$ꢅ$ꢁ  
Standard Window Installation  
3XOOꢀZLQGRZꢀVDVKꢀGRZQꢀEHKLQGꢀ6KHOOꢀ6XSSRUWꢀ&KDQQHOꢀRQꢀWRSꢀ  
RIꢀFDELQHWꢗꢀWKLVꢀKHOSVꢀKROGꢀFDELQHWꢀLQꢀSODFHꢁꢀ,QVWDOOꢀ1Rꢁꢀꢑꢀ[ꢀꢓꢀ  
KH[ꢀKHDGꢀVFUHZꢀꢇLWHPꢀꢖꢊꢂꢀSDJHꢀꢍꢍꢈꢀLQꢀVLOOꢀFKDQQHOꢀDWꢀERWWRPꢀRIꢀ  
window opening as shown in Figure 15.  
WARNING  
Falling Object Hazard  
STEP 5.  
([WHQGꢀWKHꢀVOLGLQJꢀFXUWDLQVꢀRQꢀHDFKꢀVLGHꢀVRꢀWKHꢀIUDPHVꢀ¿WꢀLQWRꢀ  
the window channels. While holding the curtain frames in  
place, mark four (4) hole locations (hole locations are in the  
upper corners on left and right curtain assembly), two (2) in the  
ZLQGRZꢀMDPEꢀDQGꢀWZRꢀꢇꢍꢈꢀLQꢀWKHꢀZLQGRZꢀVDVKꢁꢀ6OLSꢀWKHꢀFXUWDLQVꢀ  
EDFNꢀIURPꢀPDUNHGꢀORFDWLRQVꢀDQGꢀGULOOꢀIRXUꢀꢇꢔꢈꢀꢒꢄꢉꢔꢓꢀGLDPHWHUꢀ  
SLORWꢀKROHVꢁꢀ$JDLQꢂꢀH[WHQGꢀWKHꢀVOLGLQJꢀFXUWDLQVꢀRQꢀHDFKꢀVLGHꢀ  
DQGꢀWKHQꢀLQVWDOOꢀWZRꢀꢇꢍꢈꢀ1Rꢁꢀꢑꢀ[ꢀòꢓꢀ3KLOOLSVꢀKHDGꢀVFUHZVꢀꢇLWHPꢀ  
ꢖꢍꢂꢀSDJHꢀꢍꢍꢈꢀDQGꢀWZRꢀꢇꢍꢈꢀ1Rꢁꢀꢑꢀ[ꢀꢆꢀóꢓꢀ3KLOOLSVꢀKHDGꢀVFUHZVꢀ  
ꢇLWHPꢀꢖꢔꢈꢀWKURXJKꢀWKHꢀFXUWDLQꢀIUDPHVꢀDVꢀVKRZQꢀLQꢀ)LJXUHꢀꢆꢏꢁ  
Not following Installation Instructions  
for mounting your air conditioner can  
result in property damage, injury, or  
death.  
STEP 1.  
STEP 2.  
$IWHUꢀUHPRYLQJꢀWKHꢀXQLWꢀIURPꢀVKLSSLQJꢀFDUWRQꢂꢀꢇ6HHꢀ)LJXUHꢀꢆꢔꢈꢁ  
$WWDFKꢀFXUWDLQꢀDVVHPEOLHVꢀWRꢀFDELQHWꢀDVꢀVKRZQꢀLQꢀ)LJXUHꢀꢆꢊꢁꢀ  
8VHꢀHLJKWꢀꢇꢑꢈꢀ1Rꢁꢀꢑꢀ[ꢀꢊꢄꢑꢓꢀVORWWHGꢀKH[ꢀKHDGꢀVFUHZVꢀꢇLWHPꢀꢖꢆꢂꢀ  
page 22).  
Figure 13  
SHEL  
SUPOR  
T
CHANEL  
CUR TAIN  
ASEMBL  
Y
RET AING  
BRACKET  
CAUTION  
Cut/Sever  
CUR TAIN  
ASEMBL  
Y
(LEFT)  
Although great care has been  
taken to minimize sharp edges  
in the construction of your unit,  
use gloves or other hand  
SCREW#8x3/8SLOTEDHEXHEAD  
(ILUSTRA  
TIONONP  
AGE2, ITEM#1)  
protection when handling unit  
8QUIRED(4EACHSIDE). INST  
FROMNSIDESLVE  
AL  
OT CUR TAIN  
Failure to do so can result in minor  
CUR TAIN  
to moderate personal injury.  
ASEMBL  
Y
ASEMBL  
Y RET AINGBRACKET  
.
(RIGHT)  
FR085  
Figure 14  
WHENCAR  
YINGORHALDINGUNIT  
ASNCESAR  
AN), MAINT  
, OBT AIN AIST  
ANCE  
OT M  
ACLES.  
OT PUL  
UNIT  
TEDONITHERSIDEOF  
. OBT AIN AIST  
AIRCDTIONERSIONFIRMSUPOR  
FROMSLVE, USE  
THESIDEHANDLES  
ORHELP  
YOT  
AINGCLEAARNCEFROM  
SUPOR  
T UNIT  
FROMBOT  
LOCA  
THEUNIT  
DECORA  
TIVE  
(BASEP  
AL OBST  
FRONT  
ANCEORHELP  
ASNCESAR  
FROMSLVE.  
Y
OT HOLDSLVEWHILEPULINGUNIT  
MAKESURE  
T
BEFOREREMOVINGUNIT  
FROMSLVE.  
SIDEHANDLE  
FR086  
23  
Figure 15  
SHELL  
SUPOR  
T CHANEL  
WINDOWSASH  
SCREW  
, 1/2PHILLIPSHEAD  
TION,  
(SEE ILLUSTRA  
ITEM #2, P  
AGE 2)  
SCREW  
(SEE ILLUSTRA  
ITEM #4, P  
, 11/4PHILLIPSHEAD  
TION,  
AGE 2)  
A
SCREW  
, #8x 7/8HEXHEAD  
(SEE ILLUSTRA  
TION,  
A
ITEM #3, P AGE 2)  
CABINET  
SILL  
CHANEL  
WINDOWST  
OL  
SECTION A-A  
FR087  
STEP 6.  
Inspect the unit before inserting it into the sleeve. The fan  
VKRXOGꢀEHꢀPDQXDOO\ꢀURWDWHGꢀWRꢀLQVXUHꢀWKDWꢀWKH\ꢀWXUQꢀIUHHO\ꢁꢀ%Hꢀ  
sure the electrical cord will be out of the way when inserting  
the unit into the sleeve.  
WARNING  
Electrical Shock Hazard  
NOTE: )RUꢀ\RXUꢀVDIHW\ꢂꢀ'2ꢀ127ꢀSOXJꢀWKHꢀHOHFWULFDOꢀFRUGꢀLQWRꢀDQꢀHOHFWULFDOꢀ  
outlet until installation is complete.  
Make sure your electrical receptacle has the  
same configuration as your air conditioner’s  
plug. If different, consult a Licensed Electrician.  
STEP 7.  
,IꢀWKHꢀXQLWꢀFKHFNVꢀRXWꢀ2.ꢂꢀLWꢀLVꢀUHDG\ꢀWRꢀEHꢀSODFHGꢀLQWRꢀSRVLWLRQꢀ  
on bottom rails of the cabinet and pushed into place.  
Do not use plug adapters.  
Do not use an extension cord.  
Do not remove ground prong.  
NOTE: 'RꢀDOOꢀOLIWLQJꢀRIꢀWKHꢀXQLWꢀE\ꢀWKHꢀERWWRPꢀSDQꢀRQO\ꢀDQGꢀZLWKꢀDVVLVWDQFHꢀ  
or help as necessary (See Figure 14).  
Always plug into a grounded 3 prong oulet.  
Failure to follow these instructions can result in  
death, fire, or electrical shock.  
STEP 8.  
STEP 9.  
The chassis must be pulled out slightly, so that there is a gap  
RIꢀꢆꢀꢆꢄꢍꢓꢀEHWZHHQꢀWKHꢀXQLWꢀDQGꢀVKHOOꢀꢇ6HHꢀ)LJXUHꢀꢆꢉꢈꢁ  
STEP 11. CIRCUIT PROTECTION - If the air conditioner is circuit  
SURWHFWHGꢀE\ꢀDꢀIXVHꢂꢀXVHꢀDꢀꢓ7,0(ꢀ'(/$<ꢓꢀIXVHꢀRUꢀ+$&5ꢀW\SHꢀ  
&LUFXLWꢀ%UHDNHUꢀGXHꢀWRꢀPRPHQWDU\ꢀKLJKꢀFXUUHQWꢀGHPDQGꢀZKHQꢀ  
\RXUꢀDLUꢀFRQGLWLRQHUꢀLVꢀVWDUWHGꢁꢀ%HIRUHꢀRSHUDWLQJꢀ\RXUꢀXQLWꢂꢀYHULI\ꢀ  
the ampere rating of the time-delay fuse or circuit breaker  
which protects your unit. The ampere rating of the time-delay  
IXVHꢀRUꢀFLUFXLWꢀEUHDNHUꢀVKDOOꢀEHꢀꢆꢏꢀDPSVꢁꢀ5HIHUꢀWRꢀ2SHUDWLRQꢀ  
section for more detailed operating instructions.  
,QVWDOOꢀWKHꢀZKLWHꢀFKDVVLVꢀVHDOꢀJDVNHWꢀꢇLWHPꢀꢖꢉꢂꢀSDJHꢀꢍꢍꢈꢀDQGꢀ  
WKHJUD\ZLQGRZꢀVHDOꢀJDVNHWꢀꢇLWHPꢀꢖꢏꢈꢁꢀ&DUHIXOO\ꢀLQVHUWꢀWKHꢀ  
ZKLWHꢀJDVNHWꢀꢇLWHPꢀꢖꢉꢈꢀEHWZHHQꢀWKHꢀFKDVVLVꢀDQGꢀWKHꢀFDELQHWꢀ  
starting at either bottom corner and go up the side, across  
the top and down the opposite side. Insert the gray gasket  
ꢇLWHPꢖꢏꢈꢀEHWZHHQꢀWKHꢀZLQGRZꢀVDVKHVꢀDVꢀVKRZQꢀLQꢀ)LJXUHꢀ  
16. If chassis seal gasket is not installed, the operation of the  
XQLWꢀZLOOꢀEHꢀQHJDWLYHO\ꢀDIIHFWHGꢁꢀ$OVRꢂꢀWKHꢀRSHUDWLRQꢀQRLVHꢀDQGꢀ  
RXWVLGHꢀQRLVHꢀZLOOꢀEHꢀDPSOL¿HGꢁꢀ  
NOTE: 5HPRYHꢀWDSHꢀDQGꢀYHULI\ꢀ¿OWHUꢀLVꢀLQWDFWꢂꢀDVꢀSHUꢀ¿OWHUꢀLQVWUXFWLRQVꢀ  
found inside door.  
STEP 10. Hold the decorative front as shown in Figure 17. Insert the two  
WDEVꢀRIꢀWKHꢀ'HFRUDWLYHꢀ)URQWꢀ3DQHOꢀLQWRꢀWKHꢀVORWVꢀLQꢀWKHꢀWRSꢀRIꢀ  
the cabinet and lower the bottom of the decorative front to the  
ERWWRPꢀRIꢀWKHꢀFDELQHWꢁꢀ5RXWHꢀWKHꢀHOHFWULFDOꢀFRUGꢀWRꢀWKHꢀULJKWꢀRUꢀ  
left side of the bottom of the cabinet as required by the location  
of the electrical wall outlet. Use the notches provided at the  
ERWWRPꢀRIꢀWKHꢀ'HFRUDWLYHꢀ)URQWꢀ3DQHOꢀIRUꢀURXWLQJꢀWKHꢀHOHFWULFDOꢀ  
FRUGꢀRXWꢀRIꢀWKHꢀXQLWꢁꢀ$WWDFKꢀWKHꢀGHFRUDWLYHꢀIURQWꢀWRꢀWKHꢀFDELQHWꢀ  
ZLWKꢀWZRꢀꢇꢍꢈꢀ1Rꢁꢀꢑꢀ[ꢀòꢓꢀ3KLOOLSVꢀKHDGꢀVFUHZVꢀꢇLWHPꢀꢖꢍꢂꢀSDJHꢀꢍꢍꢈꢁ  
24  
Figure 17  
Figure 16  
NOTCHESPROVIED  
FORLETRICAL  
CORDEXIT  
GRA Y FOAM  
GASKET  
(SEILUSTRA  
ITEM#5ONP  
TION  
AGE2)  
SCREW  
, #8x1/2HLIPS  
AGE2)  
HEAD(SEILUSTRA  
ITEM#2, P  
TION  
2QUIRED1(EACHSIDE)  
FR089  
CAUTION  
Excessive Weight Hazard  
Use two or more people when  
installing your air conditioner.  
Failure to do so can result in  
back or other injury.  
CHAISSEAL  
GASKET  
CAUTION  
Cut/Sever  
Although great care has been  
taken to minimize sharp edges  
in the construction of your unit,  
use gloves or other hand  
protection when handling unit  
Failure to do so can result in minor  
to moderate personal injury.  
OT PRVENT  
CDTIONER, INSE  
AIRLEAKS  
AROUND  
TRT HEWHITEFOAM  
AGE2)BTWEN  
THE  
AIR  
THE  
GASKET  
(ITEM#6, P  
AIRCDTIONER  
AND THECABINET  
FR08  
25  
Cord Routing Change  
Unplug unit.  
Your Kühl Q unit will come with the power cord already installed and routed  
to the left side of the unit.  
WARNING  
Electrical Shock Hazard  
Make sure your electrical receptacle has the  
same configuration as your air conditioner’s  
plug. If different, consult a Licensed Electrician.  
For convenience and optimum appearance the direction that the power cord  
exits the unit may be changed from left to right by following the procedure  
below. Select the exit location on the left or right based on proximity to  
the power outlet.  
Do not use plug adapters.  
Do not use an extension cord.  
Do not remove ground prong.  
STEP 1. Remove Decorative Front Cover. (See Figures 18A and 18B)  
Always plug into a grounded 3 prong oulet.  
Failure to follow these instructions can result in  
death, fire, or electrical shock.  
OPEN THE DECORATIVE FRONT COVER  
1
LOCATE AND DISCONNECT ELECTRONIC CONTROL POWER CABLE HARNESS.  
2
Figure 18A  
REMOVE ELECTRONIC CONTROL  
POWER CABLE HARNESS  
2
1
Figure 18B  
REMOVE 4 SCREWS ATTACHING DECORATIVE  
FRONT COVER. SAVE TO REINSTALL LATER.  
3
REMOVE DECORATIVE FRONT COVER.  
STORE IN A SAFE PLACE TO REINSTALL LATER.  
(no image)  
4
3
SCREWS ATTACHING DECORACTIVE  
FRONT COVER TO UNIT  
(4 REQUIRED)  
26  
STEP 3.  
5HLQVWDOOꢀWKHꢀꢔꢀVFUHZVꢀUHPRYHGꢀHDUOLHUꢀWRꢀVHFXUHꢀ'HFRUDWLYHꢀ  
IURQWꢀFRYHUꢀZLWKꢀFRUGꢀH[LWLQJꢀWRꢀWKHꢀIURQWꢀERWWRPꢀRIꢀWKHꢀXQLWꢁꢀꢇꢔꢀ  
VFUHZVꢀ5(7$,1('ꢀ)520ꢀ67(3ꢀꢆꢈ  
STEP 2.  
In order to run the power cord to the right of the unit, route  
the cord along bottom inside of the unit (See Figures 20 and  
21), under the lower left mounting screw embossments (See  
)LJXUHꢀꢍꢍꢈꢀDQGꢀH[LWꢀWKHꢀFRUGꢀWKURXJKꢀULJKWꢀVLGHꢀFRUGꢀRSHQLQJꢀ  
ꢇ6HHꢀ)LJXUHꢀꢍꢍꢈꢀRIꢀWKHꢀGHFRUDWLYHꢀIURQWꢀFRYHUꢁꢀꢀ'HFRUDWLYHꢀIURQWꢀ  
cover will keep cord in place.  
Figure 21  
Figure 19  
CLOSE-UP OF  
CORD UNDER  
LEFT MOUNTING  
SCREW  
EMBOSMENT  
FRR09  
FACTORY SETTING WITH LEFT-SIDE  
CORD PLACEMENT  
Figure 22  
FRR201  
RIGHT-SIDE  
CORD ROUTING  
Figure 20  
LEFT-SIDE  
CORD ROUTING  
FRR200  
NEW CORD ALIGNMENT FOR ROUTING CORD  
EXIT TO THE RIGHT OF UNIT  
FRR202  
27  
STEP 3.  
STEP 4.  
/$<287ꢀꢅꢀ&XWꢀDQGꢀIUDPHꢀLQꢀDQꢀRSHQLQJꢀLQꢀWKHꢀGHVLUHGꢀZDOOꢀDUHDꢀ  
Thru-the-wall Installation  
WARNING  
using the illustration as a guide (See Figure 23).  
Place the cabinet in the framed opening.  
NOTE: Measure and shim void spaces between the side of cabinet and  
wood framing before securing to wall.  
Falling Object Hazard  
STEP 5.  
STEP 6.  
3RVLWLRQꢀWKHꢀIURQWꢀHGJHꢀWRꢀH[WHQGꢀLQWRꢀWKHꢀURRPꢀꢊꢄꢔꢓꢀPLQLPXPꢀ  
at top of cabinet and 1" minimum at bottom (See Figure 24).  
Not following Installation Instructions  
for mounting your air conditioner can  
result in property damage, injury, or  
death.  
6HFXUHꢀHDFKꢀVLGHꢀRIꢀWKHꢀFDELQHWꢀZLWKꢀ1Rꢁꢀꢑꢀ[ꢀꢒꢄꢑꢓꢀKH[ꢀKHDGꢀ  
VFUHZVꢀꢇLWHPꢀꢖꢊꢂꢀSDJHꢀꢍꢍꢈꢀRUꢀQDLOVꢀWKURXJKꢀWKHꢀKROHVꢀLQꢀWKHꢀ  
sides.  
NOTE: $OWHUQDWHIDVWHQHUVZKLFKPD\EHXVHGIRUVHFXULQJWKHXQLWꢀ  
cabinet to a wall, including masonry walls, are not furnished  
(available at local hardware stores).  
STEP 1.  
STEP 2.  
$IWHUꢀUHPRYLQJꢀWKHꢀXQLWꢀIURPꢀVKLSSLQJꢀFDUERQꢀVOLGHꢀFKDVVLVꢀRXWꢀ  
of cabinet (See Figure 16, page 25).  
5HPRYH the shell channel from the top of the cabinet (See  
Figure 15, page 24).  
NOTE: 1RWꢀꢀDSSOLFDEOHꢀWRꢀKHDWꢀSXPSꢀPRGHOVꢀVROGꢀZLWKRXWꢀTXLFNꢀPRXQWLQJꢀ  
cabinet.  
EXPANSION ANCHOR BOLT  
MOLLY OR TOGGLE BOLT  
Figure 23  
2x8FRAME  
FINISHEDEPONINGSIZE  
20”  
20”  
-1/4”  
-1/4”  
CONCRETE BLOCK CONSTRUCTION  
FRAME CONSTRUCTION  
FR091  
28  
Figure 24  
FRONT EDGE OF LOUVERS  
MUST ALWAYS BE OUTSIDE OF  
EXTERIOR WALL SURFACE.  
3/4” MINIMUM FRONT  
EDGE OF CABINET TO  
INSIDE WALL SURFACE.  
3/4” MINIMUM  
TRIM AROUND THE  
CABINET WITH A  
SUITABLE WOOD  
MOULDING AND  
CABINET FRONT  
1” THICK LUMBER  
FINISH TO SUIT.  
CAULK ALL AROUND  
CABINET ON OUTSIDE  
TO INSURE A WEATHER  
TIGHT SEAL.  
1” MINIMUM  
1/4” SLOPE DOWN.  
POSITION AND SECURE  
CABINET DOWNWARD.  
SLOPE OUTSIDE FOR  
DRAINAGE.  
INSIDE WALL  
EXTERIOR WALL  
MAX. WALL  
7/8” SLOTTED HEAD SCREWS (3 EA. SIDE)  
NAILS MAY BE USED IF DESIRED.  
THICKNESS  
ALLOWED 8-1/2”  
FRR092  
STEP 7.  
&XWꢀWZRꢀSLHFHVꢀRIꢀVWDQGDUGꢀꢆꢓꢀOXPEHUꢀꢇVXSSOLHGꢀE\ꢀLQVWDOOHUꢈꢀ  
to the length and width required. Place in front and back of  
bottom sill channel as shown in Figure 24. Secure with nails  
(supplied by installer).  
STEP 9.  
&RPSOHWHꢀWKHꢀLQVWDOODWLRQꢀE\ꢀIROORZLQJꢀ67(36ꢀꢉꢀWKURXJKꢀꢆꢆꢀRIꢀ  
6WDQGDUGꢀ:LQGRZꢀ,QVWDOODWLRQꢀꢇ3DJHꢀꢍꢔꢈꢁꢀ:LQGRZꢀ6HDOꢀ*DVNHWꢀ  
mentioned in STEP 9 will not be required.  
IMPORTANT:%HIRUHRSHUDWLQJ\RXUXQLWꢂUHDG67(3RI6WDQGDUGꢀ  
Window Instructions.  
STEP 8.  
Seal all holes in the cabinet with caulking compound (supplied  
by installer).  
Figure 25  
CAULK ALL SIDES  
SOLID MASONRY CONSTRUCTION  
CABINET  
MORTAR  
ELECTRICAL  
RECEPTACLE  
NOTE: ELECTRICAL RECEPTACLE LOCATION  
FROM POINT “X” MUST BE WITHIN A MAXIMUM  
RADIUS OF 69” FOR 115V UNITS.  
POINT “X”  
FRR093  
29  
This is a warm weather appliance  
Final Inspection & Start-up Checklist  
<RXUꢀDLUꢀFRQGLWLRQHUꢀLVꢀGHVLJQHGꢀWRꢀFRROꢀLQꢀZDUPꢀZHDWKHUꢀZKHQꢀWKHꢀRXWVLGHꢀ  
WHPSHUDWXUHꢀLVꢀDERYHꢀꢉꢋƒ)ꢀꢇꢆꢏꢁꢉƒ&ꢈꢀDQGꢀEHORZꢀꢆꢆꢏƒ)ꢀꢇꢔꢉꢁꢆƒ&ꢈꢂꢀVRꢀLWꢀZRQꢐWꢀ  
cool a room if it is already cool outside.  
Inspect and ensure that all components and accessories have been  
installed properly and that they have not been damaged during the  
installation progress.  
Condensation is normal  
 &KHFNꢀWKHꢀFRQGHQVDWHꢀZDWHUꢀGUDLQꢇVꢈꢀWRꢀHQVXUHꢀWKDWꢀWKH\ꢀDUHꢀDGHTXDWHꢀ  
for the removal of condensate water, and that they meet the approval  
of the end user.  
$LUꢀFRQGLWLRQHUVꢀDFWXDOO\ꢀSXPSꢀWKHꢀKHDWꢀDQGꢀKXPLGLW\ꢀIURPꢀ\RXUꢀURRPꢀWRꢀWKHꢀ  
outside. Humidity becomes water, and your air conditioner will use most  
RIꢀWKHꢀZDWHUꢀWRꢀNHHSꢀWKHꢀRXWVLGHꢀFRLOꢀFRROꢁꢀ,IꢀWKHUHꢀLVꢀH[FHVVLYHꢀKXPLGLW\ꢂꢀ  
WKHUHꢀPD\ꢀEHꢀH[FHVVꢀZDWHUꢀWKDWꢀZLOOꢀGULSꢀRXWVLGHꢁꢀ7KLVꢀLVꢀQRUPDOꢀRSHUDWLRQꢁ  
Ensure that all installation instructions concerning clearances around  
WKHꢀXQLWꢀKDYHꢀEHHQꢀDGKHUHGꢀWRꢁꢀ&KHFNꢀWRꢀHQVXUHꢀWKDWꢀWKHꢀXQLWꢀDLUꢀ¿OWHUꢂꢀ  
indoor coil, and outdoor coil are free from any obstructions.  
Frosting  
Ensure that the circuit breaker(s) or fuse(s) and supply circuit wire  
VL]HꢀKDYHꢀEHHQꢀVL]HGꢀFRUUHFWO\ꢁꢀ,IꢀWKHꢀXQLWꢀZDVꢀVXSSOLHGꢀZLWKꢀDꢀSRZHUꢀ  
supply cord, insure that it is stored properly.  
7KLVꢀXVXDOO\ꢀRFFXUVꢀEHFDXVHꢀRIꢀLQVXI¿FLHQWꢀDLUÀRZꢀDFURVVꢀWKHꢀFRLOVꢂꢀDꢀGLUW\ꢀ  
¿OWHUꢂꢀFRROꢀGDPSꢀZHDWKHUꢂꢀRUꢀDOOꢀRIꢀWKHVHꢁꢀ6HWꢀWKHꢀ6<67(0ꢀPRGHꢀWRꢀ)$1ꢀ  
21/<ꢀ and the frost will disappear. Setting the thermostat a little warmer  
will probably prevent the frosting from recurring.  
Ensure that the entire installation is in compliance with all applicable  
QDWLRQDOꢀDQGꢀORFDOꢀFRGHVꢀDQGꢀRUGLQDQFHVꢀKDYLQJꢀMXULVGLFWLRQꢁ  
Noises  
Secure components and accessories, such as a decorative front  
cover.  
$OODLUFRQGLWLRQHUVPDNHVRPHQRLVHꢁ)ULHGULFKXQLWVDUHGHVLJQHGWRꢀ  
RSHUDWHꢀDVꢀTXLHWO\ꢀDVꢀSRVVLEOHꢁꢀ$QꢀDLUꢀFRQGLWLRQHUꢀPRXQWHGꢀLQꢀDꢀZDOOꢀLVꢀTXLHWHUꢀ  
than one mounted in a window. It is important to ensure that the chassis  
seal gasket (Item 14) is properly installed (refer to installation instructions).  
Start the unit and check for proper operation of all components in  
each mode of operation.  
Instruct the owner or operator of the units operation, and the  
PDQXIDFWXUHUꢐVꢀ5RXWLQHꢀ0DLQWHQDQFHꢁ  
NOTE: $ꢀORJꢀIRUꢀUHFRUGLQJꢀWKHꢀGDWHVꢀRIꢀPDLQWHQDQFHꢀDQGꢄRUꢀVHUYLFHꢀLVꢀ  
recommended.  
Present the owner or operator of the equipment with the Installation  
ꢀ2SHUDWLRQꢀ0DQXDOꢂꢀDOOꢀDFFHVVRU\ꢀLQVWDOODWLRQꢀLQVWUXFWLRQVꢂꢀDQGꢀWKHꢀ  
QDPHꢂDGGUHVVꢀDQGꢀWHOHSKRQHꢀQXPEHUꢀRIꢀWKHꢀ$XWKRUL]HGꢀ)ULHGULFKꢀ  
:DUUDQW\6HUYLFH&RPSDQ\LQWKHDUHDIRUIXWXUHUHIHUHQFHLIꢀ  
necessary.  
30  
Routine Maintenance  
7RꢀHQVXUHꢀSURSHUꢀXQLWꢀRSHUDWLRQꢂꢀWKHꢀDLUꢀ¿OWHUVꢀVKRXOGꢀEHꢀFOHDQHGꢀDWꢀOHDVWꢀ  
monthly, and more frequently if conditions warrant. The unit must be turned  
RIIꢀEHIRUHꢀWKHꢀ¿OWHUVꢀDUHꢀFOHDQHGꢁ  
Service and Assistance  
%HIRUHꢀFDOOLQJꢀIRUꢀVHUYLFHꢂꢀSOHDVHꢀFKHFNꢀWKHꢀ³7URXEOHVKRRWLQJꢀ7LSV´ꢀVHF-  
WLRQꢀDERYHꢁꢀ7KLVꢀPD\ꢀKHOSꢀ\RXꢀWRꢀ¿QGꢀWKHꢀDQVZHUꢀWRꢀ\RXUꢀSUREOHPꢂꢀDYRLGꢀ  
unnecessary service calls, and save you the cost of a service call if the  
problem is not due to the product itself.  
To Remove, Wash and Replace Filter  
<RXꢀFDQꢀ¿QGꢀWKHꢀQDPHꢀRIꢀ\RXUꢀORFDOꢀ$XWKRUL]HGꢀ6HUYLFHꢀ3URYLGHUꢀE\ꢀYLVLWLQJꢀ  
/RZHUꢀIURQWꢀSDQHOꢀꢇ6HHꢀ)LJXUHꢀꢍꢈꢁꢀ8VHꢀKDQGOHꢀRQꢀ¿OWHUꢀWRꢀÀH[ꢀ¿OWHUꢀXSꢀDQGꢀ  
RXWꢀRIꢀUHWDLQHUꢁꢀ5HPRYHꢀ¿OWHUꢀIURPꢀXQLWꢀꢇ6HHꢀ)LJXUHꢀꢊꢈꢁꢀ&OHDQꢀ¿OWHUꢀPRQWKO\ꢀ  
RUꢀPRUHꢀIUHTXHQWO\ꢀLIꢀQHHGHGꢁꢀ5HIHUꢀWRꢀDFFHVVRULHVꢀVHFWLRQꢀIRUꢀ¿OWHUꢀRSWLRQVꢁ  
If you require further assistance  
<RXꢀFDQꢀFDOOꢀWKHꢀ&XVWRPHUꢀ6XSSRUWꢀ&DOOꢀ&HQWHUꢀDWꢀ1-800-541-6645.  
Coils & Chassis  
%HIRUHꢀFDOOLQJꢂꢀSOHDVHꢀPDNHꢀVXUHꢀWKDWꢀ\RXꢀKDYHꢀWKHꢀFRPSOHWHꢀPRGHOꢀDQGꢀ  
VHULDOQXPEHUꢂDQGGDWHRISXUFKDVHRI\RXUHTXLSPHQWDYDLODEOHꢁ%\ꢀ  
providing us with this information, we will be better able to assist you.  
NOTE: 'RꢀQRWꢀXVHꢀDꢀFDXVWLFꢀFRLOꢀFOHDQLQJꢀDJHQWꢀRQꢀFRLOVꢀRUꢀEDVHꢀSDQꢁꢀ  
Use a biodegradable cleaning agent and degreaser. The use  
of harsh cleaning materials may lead to deterioration of the  
DOXPLQXPꢀ¿QVꢀRUꢀWKHꢀFRLOꢀHQGꢀSODWHVꢁ  
Our specialists are able to assist you with:  
 6SHFL¿FDWLRQVꢀDQGꢀ)HDWXUHVꢀRIꢀRXUꢀHTXLSPHQWꢁ  
The indoor coil and outdoor coils and base pan should be inspected  
periodically (annually or semi-annually) and cleaned of all debris (lint, dirt,  
OHDYHVꢂꢀSDSHUꢂꢀHWFꢁꢈꢀDVꢀQHFHVVDU\ꢁꢀ8QGHUꢀH[WUHPHꢀFRQGLWLRQVꢂꢀPRUHꢀIUHTXHQWꢀ  
FOHDQLQJꢀPD\ꢀEHꢀUHTXLUHGꢁꢀ&OHDQꢀWKHꢀFRLOVꢀDQGꢀEDVHꢀSDQꢀZLWKꢀDꢀVRIWꢀEUXVKꢀ  
DQGꢀFRPSUHVVHGꢀDLUꢀRUꢀYDFXXPꢁꢀ$ꢀSUHVVXUHꢀZDVKHUꢀPD\ꢀDOVRꢀEHꢀXVHGꢂꢀ  
KRZHYHUꢂꢀ\RXꢀPXVWꢀEHꢀFDUHIXOꢀQRWꢀWRꢀEHQGꢀWKHꢀDOXPLQXPꢀ¿QꢀSDFNꢁꢀ8VHꢀDꢀ  
VZHHSLQJꢀXSꢀDQGꢀGRZQꢀPRWLRQꢀLQꢀWKHꢀGLUHFWLRQꢀRIꢀWKHꢀYHUWLFDOꢀDOXPLQXPꢀ¿Qꢀ  
pack when pressure cleaning coils.  
 5HIHUUDOVꢀWRꢀGHDOHUVꢂꢀDQGꢀGLVWULEXWRUVꢁ  
 8VHꢀDQGꢀ&DUHꢀ,QIRUPDWLRQꢁ  
 5HFRPPHQGHGꢀPDLQWHQDQFHꢀSURFHGXUHVꢁ  
Installation information.  
 5HIHUUDOVꢀWRꢀ$XWKRUL]HGꢀ6HUYLFHꢀ3URYLGHUVꢀDQGꢀ3DUWVꢀGHSRWVꢁ  
NOTE: ,WLVH[WUHPHO\LPSRUWDQWWRLQVXUHWKDWQRQHRIWKHHOHFWULFDOꢀ  
DQGꢄRUꢀHOHFWURQLFꢀSDUWVꢀRIꢀWKHꢀXQLWꢀJHWꢀZHWꢁꢀ%HꢀVXUHꢀWRꢀFRYHUꢀDOOꢀ  
electrical components to protect them from water or spray.  
Available Accessories  
Carbon Filter Kits  
Decorative Front  
(DFKꢀNLWꢀFRQWDLQVꢀWKUHHꢀꢇꢊꢈꢀ¿OWHUVꢁ  
KWCFQꢀꢅꢀ&DUERQꢀ¿OWHUꢀNLWꢀIRUꢀꢓ4ꢓꢀFKDVVLVꢀPRGHOVꢁꢀ  
The decorative front and discharge air grille may be cleaned with a mild  
VRDSꢀRUꢀGHWHUJHQWꢁꢀ'Rꢀ127ꢀXVHꢀVROYHQWVꢀRUꢀK\GURFDUERQꢀEDVHGꢀFOHDQHUVꢀ  
VXFKꢀDVꢀDFHWRQHꢂꢀQDSKWKDꢂꢀJDVROLQHꢂꢀEHQ]HQHꢂꢀHWFꢁꢂꢀWRꢀFOHDQꢀWKHꢀGHFRUDWLYHꢀ  
front or air discharge grilles.  
Remote Wall Thermostats  
RT6ꢀ±ꢀ'LJLWDOꢀZDOOꢀWKHUPRVWDWꢀKDUGꢀZLUHGꢂꢀZLWKꢀVLQJOHꢀVWDJHꢀFRROꢀDQGꢀKHDWꢀ  
with two fan speed selection, battery backup and backlight display  
Use a damp (not wet) cloth when cleaning the control area to prevent  
water from entering the unit, and possibly damaging the electronic control.  
Window Installation Kits  
ꢇ6WDQGDUGꢀLQꢀ.KOꢀ0RGHOVꢀZLWKRXWꢀ+HDWꢈ  
KWIKQ  
Fan Motor & Compressor  
The fan motor & compressor are permanently lubricated, and require no  
additional lubrication.  
Wall Sleeve  
FriedrichLink™ Adapter Accessory:  
Inspect the inside of the wall sleeve and drain system periodically (annually  
RUꢀVHPLꢅDQQXDOO\ꢈꢀDQGꢀFOHDQꢀDVꢀUHTXLUHGꢁꢀ8QGHUꢀH[WUHPHꢀFRQGLWLRQVꢂꢀPRUHꢀ  
IUHTXHQWꢀFOHDQLQJꢀPD\ꢀEHꢀQHFHVVDU\ꢁꢀ&OHDQꢀERWKꢀRIꢀWKHVHꢀDUHDVꢀZLWKꢀDQꢀ  
DQWLEDFWHULDOꢀDQGꢀDQWLIXQJDOꢀFOHDQHUꢁꢀ5LQVHꢀERWKꢀLWHPVꢀWKRURXJKO\ꢀZLWKꢀZDWHUꢀ  
DQGꢀHQVXUHꢀWKDWꢀWKHꢀGUDLQꢀRXWOHWVꢀDUHꢀRSHUDWLQJꢀFRUUHFWO\ꢁꢀ&KHFNꢀWKHꢀVHDODQWꢀ  
around the sleeve and reseal areas as needed.  
KWIFI)ULHGULFK/LQNŒ$GDSWHU$FFHVVRU\IRUZLUHOHVVFRQWURODQGꢀ  
additional programming options  
Decorative Color Front Panel Kits:  
KWBGEQAꢀꢅꢀ4ꢀ0RGHOꢀ'HFRUDWLYHꢀ)URQWꢀ&RYHUꢀLQꢀ&ODVVLFꢀ%HLJH  
KWBLKQAꢀꢅꢀ4ꢀ0RGHOꢀ'HFRUDWLYHꢀ)URQWꢀ&RYHUꢀLQꢀ%ODFNꢀ2Q\[ꢀ  
KWBLUQAꢀꢅꢀ4ꢀ0RGHOꢀ'HFRUDWLYHꢀ)URQWꢀ&RYHUꢀLQꢀ&REDOWꢀ%OXH  
KWPNKQAꢀꢅꢀ4ꢀ0RGHOꢀ'HFRUDWLYHꢀ)URQWꢀ&RYHUꢀLQꢀ3LQNꢀ'LDPRQG  
KWREDQA ꢅꢀ4ꢀ0RGHOꢀ'HFRUDWLYHꢀ)URQWꢀ&RYHUꢀLQꢀ'HHSꢀ5HG  
KWWHTQA ꢅꢀ4ꢀ0RGHOꢀ'HFRUDWLYHꢀ)URQWꢀ&RYHUꢀLQꢀ'HVLJQHUꢀ:KLWH  
ꢃꢀ  
Troubleshooting Tips  
&203/$,17  
&$86(  
The unit is turned to the off position,  
RUꢀWKHꢀWKHUPRVWDWꢀLVꢀVDWLV¿HGꢁ  
62/87,21  
Turn the unit to the on position and raise or lower  
temperature setting (as appropriate) to call for  
operation.  
Ɣ
Ɣ
Ɣ
Ɣ
7KHꢀ/&',ꢀSRZHUꢀFRUGꢀLVꢀXQSOXJJHGꢁ  
Plug into a properly grounded 3 prong receptacle.  
6HHꢀ³(OHFWULFDOꢀ5DWLQJꢀ7DEOHV´ꢀRQꢀSJꢁꢀꢉꢀIRUꢀWKHꢀ  
proper receptacle type for your unit.  
Ɣ
Ɣ
7KHꢀ/&',ꢀSRZHUꢀFRUGꢀKDVꢀWULSSHGꢀ  
ꢇ5HVHWꢀEXWWRQꢀKDVꢀSRSSHGꢀRXWꢈꢁ  
The circuit breaker has tripped or  
the supply circuit fuse has blown.  
Ɣ
Ɣ
3UHVVꢀDQGꢀUHOHDVHꢀ5(6(7ꢀꢇOLVWHQꢀIRUꢀFOLFNꢗꢀ5HVHWꢀ  
button latches and remains in) to resume operation.  
Unit does not operate.  
5HVHWꢀWKHꢀFLUFXLWꢀEUHDNHUꢂꢀRUꢀUHSODFHꢀWKHꢀIXVHꢀDVꢀ  
applicable. If the problem continues, contact a  
licensed electrician.  
Ɣ
Ɣ
Ɣ
Ɣ
There has been a local power  
failure.  
Ɣ
Ɣ
Ɣ
Ɣ
The unit will resume normal operation once power  
has been restored.  
2WKHUꢀDSSOLDQFHVꢀDUHꢀEHLQJꢀXVHGꢀRQꢀ  
the same circuit.  
The unit requires a dedicated outlet circuit, not  
shared with other appliances.  
$QꢀH[WHQVLRQꢀFRUGꢀLVꢀEHLQJꢀXVHGꢁ  
'Rꢀ127ꢀXVHꢀDQꢀH[WHQVLRQꢀFRUGꢀZLWKꢀWKLVꢀRUꢀDQ\ꢀ  
other air conditioner.  
8QLWꢀ7ULSVꢀ&LUFXLWꢀ%UHDNHUꢀRUꢀ%ORZVꢀ)XVHVꢁ  
The circuit breaker or time-delay  
fuse is not of the proper rating.  
5HSODFHꢀZLWKꢀDꢀFLUFXLWꢀEUHDNHUꢀRUꢀWLPHꢅGHOD\ꢀIXVHꢀ  
RIꢀWKHꢀSURSHUꢀUDWLQJꢁꢀ6HHꢀ³(OHFWULFDOꢀ5DWLQJꢀ7DEOHV´ꢀ  
RQꢀSJꢁꢀꢉꢀIRUꢀWKHꢀSURSHUꢀFLUFXLWꢀEUHDNHUꢄIXVHꢀUDWLQJꢀ  
for your unit. If the problem continues, contact a  
licensed electrician.  
Ɣ
Ɣ
7KHꢀ/&',ꢀSRZHUꢀFRUGꢀFDQꢀWULSꢀꢇ5HVHWꢀ Ɣ 3UHVVꢀDQGꢀUHOHDVHꢀ5(6(7ꢀꢇOLVWHQꢀIRUꢀFOLFNꢗꢀ5HVHWꢀ  
button pops out) due to disturbances  
on your power supply line.  
button latches and remains in) to resume normal  
operation.  
Electrical overload, overheating, or  
FRUGꢀSLQFKLQJꢀFDQꢀWULSꢀꢇ5HVHWꢀEXWWRQꢀ  
SRSVꢀRXWꢈꢀWKHꢀ/&',ꢀSRZHUꢀFRUGꢁ  
Ɣ
2QFHꢀWKHꢀSUREOHPꢀKDVꢀEHHQꢀGHWHUPLQHGꢀDQGꢀ  
FRUUHFWHGꢂꢀSUHVVꢀDQGꢀUHOHDVHꢀ5(6(7ꢀꢇOLVWHQꢀIRUꢀ  
FOLFNꢗꢀ5HVHWꢀEXWWRQꢀODWFKHVꢀDQGꢀUHPDLQVꢀLQꢈꢀWRꢀ  
resume normal operation.  
/&',ꢀ3RZHUꢀ&RUGꢀ7ULSVꢀꢇ5HVHWꢀ%XWWRQꢀ3RSVꢀ2XWꢈꢁ  
127(ꢃꢀꢀꢀ$ꢀGDPDJHGꢀSRZHUꢀVXSSO\ꢀFRUGꢀPXVWꢀEHꢀUHSODFHGꢀZLWKꢀDꢀQHZꢀSRZHUꢀVXSSO\ꢀFRUGꢀREWDLQHGꢀ  
from the product manufacturer and must not be repaired.  
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
7KHꢀUHWXUQꢄGLVFKDUJHꢀDLUꢀJULOOHꢀLVꢀ  
blocked.  
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
Ɣ
(QVXUHꢀWKDWꢀWKHꢀUHWXUQꢀDQGꢄRUꢀGLVFKDUJHꢀDLUꢀSDWKVꢀ  
are not blocked by curtains, blinds, furniture, etc.  
Windows or doors to the outside are  
open.  
Ensure that all windows and doors are closed.  
The temperature is not set at a cool  
HQRXJKꢄZDUPꢀHQRXJKꢀVHWWLQJꢁ  
7KHꢀ¿OWHUꢀLVꢀGLUW\ꢀRUꢀREVWUXFWHGꢁ  
$GMXVWꢀWKHꢀ7HPSHUDWXUHꢀFRQWUROꢀWRꢀDꢀFRROHUꢀRUꢀ  
warmer setting as necessary.  
&OHDQꢀWKHꢀ¿OWHUꢂꢀꢇ6HHꢀ5RXWLQHꢀ0DLQWHQDQFHꢈꢂꢀRUꢀ  
remove obstruction.  
8QLWꢀ'RHVꢀ1RWꢀ&RROꢄ+HDWꢀ5RRPꢀ6XI¿FLHQWO\ꢂꢀ2Uꢀ  
&\FOHVꢀ2Qꢀ$QGꢀ2IIꢀ7RRꢀ)UHTXHQWO\ꢁ  
The indoor coil or outdoor coil is  
dirty or obstructed.  
&OHDQꢀWKHꢀFRLOVꢂꢀꢇ6HHꢀ5RXWLQHꢀ0DLQWHQDQFHꢈꢂꢀRUꢀ  
remove obstruction.  
7KHUHꢀLVꢀH[FHVVLYHꢀKHDWꢀRUꢀPRLVWXUHꢀ  
(cooking, showers, etc.) in the room.  
%HꢀVXUHꢀWRꢀXVHꢀH[KDXVWꢀYHQWꢀIDQVꢀZKLOHꢀFRRNLQJꢀ  
or bathing and, if possible, try not to use heat  
producing appliances during the hottest part of the  
day.  
Ɣ
The temperature of the room you  
DUHꢀWU\LQJꢀWRꢀFRROꢀLVꢀH[WUHPHO\ꢀKRWꢁ  
Ɣ
$OORZꢀDGGLWLRQDOꢀWLPHꢀIRUꢀWKHꢀDLUꢀFRQGLWLRQHUꢀWRꢀFRROꢀ  
off a very hot room.  
32  
&203/$,17  
&$86(  
The outside temperature is below  
ꢉꢋƒ)ꢀꢇꢆꢉƒꢀ&ꢈꢁ  
62/87,21  
'RꢀQRWꢀWU\ꢀWRꢀRSHUDWHꢀ\RXUꢀDLUꢀFRQGLWLRQHUꢀLQꢀWKHꢀ  
cooling mode when the outside temperature is  
EHORZꢀꢉꢋƒ)ꢀꢇꢆꢉƒꢀ&ꢈꢁꢀꢀ7KHꢀXQLWꢀZLOOꢀQRWꢀFRROꢀSURSHUO\ꢂꢀ  
and the unit may be damaged.  
Ɣ
Ɣ
Ɣ
Ɣ
The digital control is set to fan  
cycling mode.  
Since the fan does not circulate the room air  
continuously at this setting, the room air does not  
PL[ꢀDVꢀZHOOꢀDQGꢀKRWꢀꢇRUꢀFROGꢈꢀVSRWVꢀPD\ꢀUHVXOWꢁꢀꢀ  
Using the continuous fan setting is recommended  
to obtain optimum comfort levels.  
8QLWꢀ'RHVꢀ1RWꢀ&RROꢄ+HDWꢀ5RRPꢀ6XI¿FLHQWO\ꢂꢀ2Uꢀ  
&\FOHVꢀ2Qꢀ$QGꢀ2IIꢀ7RRꢀ)UHTXHQWO\ꢀꢇFRQWLQXHGꢈꢁ  
Ɣ
Ɣ
7KHꢀDLUꢀFRQGLWLRQHUꢀKDVꢀLQVXI¿FLHQWꢀ  
cooling capacity to match the heat  
gain of the room.  
Ɣ
Ɣ
ꢀ&KHFNꢀWKHꢀFRROLQJꢀFDSDFLW\ꢀRIꢀ\RXUꢀXQLWꢀWRꢀHQVXUHꢀLWꢀ  
LVꢀSURSHUO\ꢀVL]HGꢀIRUꢀWKHꢀURRPꢀLQꢀZKLFKꢀLWꢀLVꢀLQVWDOOHGꢁꢀ  
5RRPꢀDLUꢀFRQGLWLRQHUVꢀDUHꢀQRWꢀGHVLJQHGꢀWRꢀFRROꢀ  
multiple rooms.  
7KHꢀDLUꢀFRQGLWLRQHUꢀKDVꢀLQVXI¿FLHQWꢀ  
heating capacity to match the heat  
loss of the room.  
&KHFNꢀWKHꢀKHDWLQJꢀFDSDFLW\ꢀRIꢀ\RXUꢀXQLWꢁꢀꢀ$LUꢀ  
FRQGLWLRQHUVꢀDUHꢀVL]HGꢀWRꢀPHHWꢀWKHꢀFRROLQJꢀORDGꢂꢀ  
DQGꢀKHDWHUꢀVL]HꢀLVꢀWKHQꢀVHOHFWHGꢀWRꢀPHHWꢀWKHꢀ  
KHDWLQJꢀORDGꢁꢀꢀ,QꢀH[WUHPHꢀQRUWKHUQꢀFOLPDWHVꢂꢀURRPꢀ  
air conditioners may not be able to be used as a  
primary source of heat.  
Ɣ
Ɣ
7KLVꢀPD\ꢀEHꢀGXHꢀWRꢀDQꢀH[FHVVLYHꢀ  
heat load in the room.  
Ɣ
Ɣ
If there are heat producing appliances in use in the  
room, or if the room is heavily occupied, the unit will  
need to run longer to remove the additional heat.  
It may also be due to an improperly  
VL]HGꢀXQLWꢁ  
%HꢀVXUHꢀWRꢀXVHꢀH[KDXVWꢀYHQWꢀIDQVꢀZKLOHꢀFRRNLQJꢀ  
or bathing and, if possible, try not to use heat  
producing appliances during the hottest part of the  
day.  
Ɣ
Ɣ
This may be normal for higher  
HI¿FLHQF\ꢀꢇ((5ꢈꢀDLUꢀFRQGLWLRQHUVꢁ  
Ɣ
Ɣ
7KHꢀXVHꢀRIꢀKLJKHUꢀHI¿FLHQF\ꢀFRPSRQHQWVꢀLQꢀ\RXUꢀ  
new air conditioner may result in the unit running  
longer than you feel it should. This may be more  
DSSDUHQWꢂꢀLIꢀLWꢀUHSODFHGꢀDQꢀROGHUꢂꢀOHVVꢀHI¿FLHQWꢂꢀ  
model. The actual energy usage, however, will be  
VLJQL¿FDQWO\ꢀOHVVꢀZKHQꢀFRPSDUHGꢀWRꢀROGHUꢀPRGHOVꢁ  
7KHꢀHQHUJ\ꢀHI¿FLHQF\ꢀUDWLRꢀꢇ((5ꢈꢀDQGꢀFRROLQJꢀ  
FDSDFLW\ꢀUDWLQJꢀꢇ%WXꢄKꢈꢀOLVWHGꢀRQꢀWKHꢀXQLW¶VꢀUDWLQJꢀ  
SODWHꢀDUHꢀERWKꢀDJHQF\ꢀFHUWL¿HGꢁ  
8QLWꢀ5XQVꢀ7RRꢀ0XFKꢁ  
<RXꢀPD\ꢀQRWLFHꢀWKDWꢀWKHꢀGLVFKDUJHꢀ  
air temperature of your new air  
conditioner may not seem as cold  
as you may be accustomed to from  
older units. This does not, however,  
indicate a reduction in the cooling  
capacity of the unit.  
33  
Addendum 1  
Schedule Table with Energy Saving Values  
Residenꢀal Schedule  
Wed  
600 Start Time  
Period  
1
Sun  
Start Time  
System Mode  
Fan Mode  
Fan Speed  
Mon  
600 Start Time  
Tues  
600 Start Time  
Thur  
600 Start Time  
Fri  
600 Start Time  
Sat  
600 Start Time  
600  
Cool  
Auto  
Low  
78  
70  
Cool System Mode  
Auto Fan Mode  
Low Fan Speed  
78 Set Point Cool  
70 Set Point Heat  
Cool System Mode  
Auto Fan Mode  
Low Fan Speed  
78 Set Point Cool  
70 Set Point Heat  
Cool System Mode  
Auto Fan Mode  
Low Fan Speed  
78 Set Point Cool  
70 Set Point Heat  
Cool System Mode  
Auto Fan Mode  
Low Fan Speed  
78 Set Point Cool  
70 Set Point Heat  
Cool System Mode  
Auto Fan Mode  
Low Fan Speed  
78 Set Point Cool  
70 Set Point Heat  
Cool System Mode  
Auto Fan Mode  
Low Fan Speed  
78 Set Point Cool  
70 Set Point Heat  
Set Point Cool  
Set Point Heat  
Start Time  
System Mode  
Fan Mode  
Fan Speed  
Set Point Cool  
Set Point Heat  
800 Start Time  
Cool System Mode  
Auto Fan Mode  
Low Fan Speed  
85 Set Point Cool  
62 Set Point Heat  
800 Start Time  
Cool System Mode  
Auto Fan Mode  
Low Fan Speed  
85 Set Point Cool  
62 Set Point Heat  
800 Start Time  
Cool System Mode  
Auto Fan Mode  
Low Fan Speed  
85 Set Point Cool  
62 Set Point Heat  
800 Start Time  
Cool System Mode  
Auto Fan Mode  
Low Fan Speed  
85 Set Point Cool  
62 Set Point Heat  
800 Start Time  
Cool System Mode  
Auto Fan Mode  
Low Fan Speed  
85 Set Point Cool  
62 Set Point Heat  
800 Start Time  
Cool System Mode  
Auto Fan Mode  
Low Fan Speed  
85 Set Point Cool  
62 Set Point Heat  
800  
Cool  
Auto  
Low  
85  
2
3
4
62  
Start Time  
System Mode  
Fan Mode  
Fan Speed  
Set Point Cool  
Set Point Heat  
1800 Start Time  
Cool System Mode  
Auto Fan Mode  
Low Fan Speed  
78 Set Point Cool  
70 Set Point Heat  
1800 Start Time  
Cool System Mode  
Auto Fan Mode  
Low Fan Speed  
78 Set Point Cool  
70 Set Point Heat  
1800 Start Time  
Cool System Mode  
Auto Fan Mode  
Low Fan Speed  
78 Set Point Cool  
70 Set Point Heat  
1800 Start Time  
Cool System Mode  
Auto Fan Mode  
Low Fan Speed  
78 Set Point Cool  
70 Set Point Heat  
1800 Start Time  
Cool System Mode  
Auto Fan Mode  
Low Fan Speed  
78 Set Point Cool  
70 Set Point Heat  
1800 Start Time  
Cool System Mode  
Auto Fan Mode  
Low Fan Speed  
78 Set Point Cool  
70 Set Point Heat  
1800  
Cool  
Auto  
Low  
78  
70  
Start Time  
System Mode  
Fan Mode  
Fan Speed  
Set Point Cool  
Set Point Heat  
2200 Start Time  
Cool System Mode  
Auto Fan Mode  
Low Fan Speed  
82 Set Point Cool  
62 Set Point Heat  
2200 Start Time  
Cool System Mode  
Auto Fan Mode  
Low Fan Speed  
82 Set Point Cool  
62 Set Point Heat  
2200 Start Time  
Cool System Mode  
Auto Fan Mode  
Low Fan Speed  
82 Set Point Cool  
62 Set Point Heat  
2200 Start Time  
Cool System Mode  
Auto Fan Mode  
Low Fan Speed  
82 Set Point Cool  
62 Set Point Heat  
2200 Start Time  
Cool System Mode  
Auto Fan Mode  
Low Fan Speed  
82 Set Point Cool  
62 Set Point Heat  
2200 Start Time  
Cool System Mode  
Auto Fan Mode  
Low Fan Speed  
82 Set Point Cool  
62 Set Point Heat  
2200  
Cool  
Auto  
Low  
82  
62  
Commercial Schedule  
Wed  
Period  
1
Sun  
Start Time  
System Mode  
Fan Mode  
Fan Speed  
Mon  
700 Start Time  
Tues  
700 Start Time  
Thur  
Fri  
700 Start Time  
Sat  
700 Start Time  
700 Start Time  
700 Start Time  
700  
Cool  
Auto  
Med  
84  
Cool System Mode  
Auto Fan Mode  
Med Fan Speed  
84 Set Point Cool  
62 Set Point Heat  
Cool System Mode  
Auto Fan Mode  
Med Fan Speed  
75 Set Point Cool  
70 Set Point Heat  
Cool System Mode  
Auto Fan Mode  
Med Fan Speed  
75 Set Point Cool  
70 Set Point Heat  
Cool System Mode  
Auto Fan Mode  
Med Fan Speed  
75 Set Point Cool  
70 Set Point Heat  
Cool System Mode  
Auto Fan Mode  
Med Fan Speed  
75 Set Point Cool  
70 Set Point Heat  
Cool System Mode  
Auto Fan Mode  
Med Fan Speed  
75 Set Point Cool  
70 Set Point Heat  
Set Point Cool  
Set Point Heat  
62  
Start Time  
System Mode  
Fan Mode  
Fan Speed  
Set Point Cool  
Set Point Heat  
1800 Start Time  
Cool System Mode  
Auto Fan Mode  
Med Fan Speed  
84 Set Point Cool  
62 Set Point Heat  
1800 Start Time  
Cool System Mode  
Auto Fan Mode  
Med Fan Speed  
84 Set Point Cool  
62 Set Point Heat  
1800 Start Time  
Cool System Mode  
Auto Fan Mode  
Med Fan Speed  
84 Set Point Cool  
62 Set Point Heat  
1800 Start Time  
Cool System Mode  
Auto Fan Mode  
Med Fan Speed  
84 Set Point Cool  
62 Set Point Heat  
1800 Start Time  
Cool System Mode  
Auto Fan Mode  
Med Fan Speed  
84 Set Point Cool  
62 Set Point Heat  
1800 Start Time  
Cool System Mode  
Auto Fan Mode  
Med Fan Speed  
84 Set Point Cool  
62 Set Point Heat  
1800  
Cool  
Auto  
Med  
84  
2
62  
34  
Friedrich Air Conditioning Company  
10001 Reunion Place, Suite 500  
San Antonio, TX 78216  
800.541.6645  
www.friedrich.com  
ROOM AIR CONDITIONERS  
LIMITED WARRANTY  
FIRST YEAR  
ANY PART: If any part supplied by FRIEDRICH fails because of a defect in workmanship or material within twelve months from  
date of original purchase, FRIEDRICH will repair the product at no charge, provided room air conditioner is reasonably accessible  
for service. Any additional labor cost for removing inaccessible units and/or charges for mileage related to travel by a Service  
Agency that exceeds 25 miles one way will be the responsibility of the owner. This remedy is expressly agreed to be the exclusive  
remedy within twelve months from the date of the original purchase.  
SECOND THROUGH FIFTH YEAR  
SEALED REFRIGERANT SYSTEM: If the Sealed Refrigeration System (defined for this purpose as the compressor, condenser  
coil, evaporator coil, reversing valve, check valve, capillary, filter drier, and all interconnecting tubing) supplied by FRIEDRICH in  
your Room Air Conditioner fails because of a defect in workmanship or material within sixty months from date of purchase,  
FRIEDRICH will pay a labor allowance and parts necessary to repair the Sealed Refrigeration System; PROVIDED FRIEDRICH will  
not pay the cost of diagnosis of the problem, removal, freight charges, and transportation of the air conditioner to and from the  
Service Agency, and the reinstallation charges associated with repair of the Sealed Refrigeration System. All such cost will be the  
sole responsibility of the owner. This remedy is expressly agreed to be the exclusive remedy within sixty months from the date of the  
original purchase.  
APPLICABILITY AND LIMITATIONS: This warranty is applicable only to units retained within the Fifty States of the U.S.A., District  
of Columbia, and Canada. This warranty is not applicable to:  
1. Air filters, fuses, batteries and the front grille removal tool.  
2. Products on which the model and serial numbers have been removed.  
3. Products which have defects or damage which results from improper installation, wiring, electrical current  
characteristics, or maintenance; or caused by accident, misuse or abuse, fire, flood, alterations and/or misapplication  
of the product and/or units installed in a corrosive atmosphere, default or delay in performance caused by war,  
government restrictions or restraints, strikes, material shortages beyond the control of FRIEDRICH, or acts of God.  
OBTAINING WARRANTY PERFORMANCE: Service will be provided by the FRIEDRICH Authorized Dealer or Service  
Organization in your area. They are listed in the Yellow Pages. If assistance is required in obtaining warranty performance, write  
to: Room Air Conditioner Service Manager, Friedrich Air Conditioning Co., 10001 Reunion Place, Ste.500, San Antonio, TX., 78216.  
LIMITATIONS:  
THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER WARRANTIES. Anything in the warranty  
notwithstanding, ANY IMPLIED WARRANTIES OF FITNESS FOR PARTICULAR PURPOSE AND/OR MERCHANTABILITY  
SHALL BE LIMITED TO THE DURATION OF THIS EXPRESS WARRANTY. MANUFACTURER EXPRESSLY DISCLAIMS AND  
EXCLUDES ANY LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGE FOR BREACH OF ANY EXPRESSED OR  
IMPLIED WARRANTY.  
Performance of Friedrich’s Warranty obligation is limited to one of the following methods:  
1. Repair of the unit  
2. A refund to the customer for the prorated value of the unit based upon the remaining warranty period of the unit.  
3. Providing a replacement unit of equal value  
The method of fulfillment of the warranty obligation is at the sole discretion of Friedrich Air Conditioning.  
NOTE: Some states do not allow limitations on how long an implied warranty lasts, or do not allow the limitation or exclusion of  
consequential or incidental damages, so the foregoing exclusions and limitations may not apply to you.  
OTHER: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.  
PROOF OF PURCHASE: Owner must provide proof of purchase in order to receive any warranty related services.  
All service calls for explaining the operation of this product will be the sole responsibility of the consumer.  
All warranty service must be provided by an Authorized FRIEDRICH Service Agency, unless authorized by FRIEDRICH prior to  
repairs being made.  
35  
Friedrich Air Conditioning Co.  
ꢁꢂꢂꢂꢁꢀ5HXQLRQꢀ3ODFHꢃꢀ6XLWHꢀꢄꢂꢂꢀ‡ꢀ6DQꢀ$QWRQLRꢃꢀ7H[DVꢀꢅꢆꢇꢁꢈ  
1-800-541-66450  
Printed in the U.S.A.  
93001001_00  

Black Decker Linea Pro WP1500K User Manual
Bryant 463AAC008BA User Manual
Carrier 48AW User Manual
Carrier DPE014 User Manual
Carrier KC_183P User Manual
Comfort Aire Air Conditioner PAD 121 User Manual
Epson Printer SEPG00004 User Manual
Harbor Freight Tools 2 Ton Compact Floor Jack 68783 User Manual
Hisense Group KFR 28GWE User Manual
Honeywell ML8135 User Manual