Friedrich Air Conditioner P012B User Manual

Service Manual  
Model:  
P09A  
P09B  
Portable Air Conditioner  
P012A  
P012B  
PORT-ServMan (04-09)  
Table Of Contents  
Important Safety Information ....................................................................................................................2-4  
Introduction ..................................................................................................................................................4  
Unit Introduction ..........................................................................................................................................5  
Unit Model and Serial Number Identification ...............................................................................................6  
Technical Specifications ..............................................................................................................................7  
Precautions for use .....................................................................................................................................8  
Control Panel Operation ..............................................................................................................................9  
Remote Control Operation .........................................................................................................................10  
Window Adapter Kit Installation .............................................................................................................11-12  
Condensation Handling ..............................................................................................................................13  
Maintenance and Service ...........................................................................................................................14  
Troubleshooting ..........................................................................................................................................15  
Refrigeration System Diagram ....................................................................................................................16  
Wiring Diagrams .........................................................................................................................................17  
Warranty .....................................................................................................................................................18  
1
IMPORTANT SAFETY INFORMATION  
The information contained in this manual is intended for use by a qualified service technician who is familiar  
with the safety procedures required for installation and repair, and who is equipped with the proper tools and  
test instruments required to service this product.  
Installation or repairs made by unqualified persons can result in subjecting the unqualified person making  
such repairs as well as the persons being served by the equipment to hazards resulting in injury or electrical  
shock which can be serious or even fatal.  
Safety warnings have been placed throughout this manual to alert you to potential hazards that may be  
encountered. If you install or perform service on equipment, it is your responsibility to read and obey these  
warnings to guard against any bodily injury or property damage which may result to you or others.  
Your safety and the safety of others are very important.  
We have provided many important safety messages in this manual and on your appliance. Always read  
and obey all safety messages.  
This is a safety Alert symbol.  
This symbol alerts you to potential hazards that can kill or hurt you and others.  
All safety messages will follow the safety alert symbol with the word “WARNING”  
or “CAUTION”. These words mean:  
You can be killed or seriously injured if you do not follow instructions.  
WARNING  
You can receive minor or moderate injury if you do not follow instructions.  
CAUTION  
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury,  
and tell you what will happen if the instructions are not followed.  
A message to alert you of potential property damage will have the  
word “NOTICE”. Potential property damage can occur if instructions  
are not followed.  
NOTICE  
PERSONAL INJURY OR DEATH HAZARDS  
ELECTRICAL HAZARDS:  
Unplug and/or disconnect all electrical power to the unit before performing inspections,  
maintenance, or service.  
Make sure to follow proper lockout/tag out procedures.  
Always work in the company of a qualified assistant if possible.  
Capacitors, even when disconnected from the electrical power source, retain an electrical charge  
potential capable of causing electric shock or electrocution.  
Handle, discharge, and test capacitors according to safe, established, standards, and approved  
procedures.  
Extreme care, proper judgment, and safety procedures must be exercised if it becomes necessary  
to test or troubleshoot equipment with the power on to the unit.  
2
Do not spray or pour water on the return air grille, discharge air grille, evaporator coil, control panel,  
and sleeve on the room side of the air conditioning unit while cleaning.  
Electrical component malfunction caused by water could result in electric shock or other electrically  
unsafe conditions when the power is restored and the unit is turned on, even after the exterior is dry.  
Never operate the A/C unit with wet hands.  
Use air conditioner on a single dedicated circuit within the specified amperage rating.  
Use on a properly grounded outlet only.  
Do not remove ground prong of plug.  
Do not cut or modify the power supply cord.  
Do not use extension cords with the unit.  
Follow all safety precautions and use proper and adequate protective safety aids such as: gloves,  
goggles, clothing, adequately insulated tools, and testing equipment etc.  
Failure to follow proper safety procedures and/or these warnings can result in serious injury or death.  
REFRIGERATION SYSTEM HAZARDS:  
Use approved standard refrigerant recovering procedures and equipment to relieve pressure before  
opening system for repair.  
Do not allow liquid refrigerant to contact skin. Direct contact with liquid refrigerant can result in minor  
to moderate injury.  
Be extremely careful when using an oxy-acetylene torch. Direct contact with the torch’s flame or hot  
surfaces can cause serious burns.  
Make sure to protect personal and surrounding property with fire proof materials.  
Have a fire extinguisher at hand while using a torch.  
Provide adequate ventilation to vent off toxic fumes, and work with a qualified assistant whenever  
possible.  
Always use a pressure regulator when using dry nitrogen to test the sealed refrigeration system for  
leaks, flushing etc.  
Make sure to follow all safety precautions and to use proper protective safety aids such as: gloves,  
safety glasses, clothing etc.  
Failure to follow proper safety procedures and/or these warnings can result in serious injury or death.  
MECHANICAL HAZARDS:  
Extreme care, proper judgment and all safety procedures must be followed when testing,  
troubleshooting, handling, or working around unit with moving and/or rotating parts.  
Be careful when, handling and working around exposed edges and corners of sleeve, chassis, and  
other unit components especially the sharp fins of the indoor and outdoor coils.  
Use proper and adequate protective aids such as: gloves, clothing, safety glasses etc.  
Failure to follow proper safety procedures and/or these warnings can result in serious injury or death.  
3
PROPERTY DAMAGE HAZARDS  
FIRE DAMAGE HAZARDS:  
Read the Installation/Operation Manual for this air conditioning unit prior to operating.  
Use air conditioner on a single dedicated circuit within the specified amperage rating.  
Connect to a properly grounded outlet only.  
Do not remove ground prong of plug.  
Do not cut or modify the power supply cord.  
Do not use extension cords with the unit.  
Failure to follow these instructions can result in fire and minor to serious property damage.  
WATER DAMAGE HAZARDS:  
Improper installation maintenance, or servicing of the air conditioner unit, or not following the above  
Safety Warnings can result in water damage to personal items or property such.  
Insure that the unit has a drain hose properly connected. (Drain hose is optional, see page13)  
Do not drill holes in the bottom of the drain pan or the underside of the unit.  
Failure to follow these instructions can result in damage to the unit and/or minor to serious property  
damage.  
INTRODUCTION  
This service manual is designed to be used in conjunction with the installation manuals provided with each unit.  
This service manual was written to assist the professional HVAC service technician to quickly and accurately  
diagnose and repair any malfunctions of this product.  
This manual, therefore, will deal with all subjects in a general nature. (i.e. all text will pertain to all models).  
Regarding the Portable Air Conditioner  
This Portable Air Conditioner is designed to provide a quick and easy cooling solution for areas that either do not have  
air conditioning or areas that the current system cannot maintain at a comfortable level.  
This unit is also great as a back-up system in case the primary cooling system should fail.  
Other means of conditioning should be employed when the indoor temperature is either below 17°C (63°F) or above  
35°C (95°F) .  
This unit is designed with human comfort in mind.  
IMPORTANT:  
It will be necessary for you to accurately identify the unit you are  
servicing, so you can be certain of a proper diagnosis and repair.  
(See Unit Identification.)  
4
UNIT INTRODUCTION  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
8.  
9.  
10.  
Control panel  
Air outlet  
Signal receptor  
Handle  
Caster  
Air outlet hose  
Air filter  
Air intake hose  
1/2" water outlet drain  
Power supply cord  
5
UNIT MODEL AND SERIAL NUMBER UNIT IDENTIFICATION  
MODEL NUMBER CODE  
P 09 A  
Portable  
2nd and 3rd DIGIT - Approximate  
BTU/HR (Cooling)  
Heating BTU/Hr capacity listed in the  
Specification/Performance Data Section  
Design Series  
RAC SERIAL NUMBER IDENTIFICATION GUIDE  
Serial Number  
Decade Manufactured  
L
H
G
K
00001  
L=0  
A=1  
B=2  
C=3  
D=4  
E=5  
F=6  
G=7  
H=8  
J=9  
Production Run Number  
Year Manufactured  
Product Line  
R = RAC  
A=1  
B=2  
C=3  
D=4  
E=5  
F=6  
G=7  
H=8  
J=9  
K=0  
Month Manufactured  
A=Jan D=Apr G=Jul K=Oct  
B=Feb E=May H=Aug L=Nov  
C=Mar F=Jun J=Sept M=Dec  
6
TECHNICAL SPECIFICATIONS P09A AND P12A  
Indoor Air  
Circulation  
(CFM)  
Refrigerant  
Charge)  
(R-22)  
Locked  
Rotor  
Amps  
Net  
Weight  
(lbs.)  
Cooling Capacity  
BTU/h  
Dimensions  
(W” x H” x D”)  
Dehumidification  
(Pints/Hour)  
Circuit  
Rating  
Plug Face  
(NEMA#)  
Model  
Voltage / Hz  
Amps  
Watts  
P09A  
P12A  
8900  
11500  
115/60  
115/60  
8
10.5  
923  
1280  
19.5” x 33.6” x 15.5”  
19.5” x 33.6” x 15.5”  
4.2  
4.2  
212  
235  
18  
24.7  
40.5  
40.5  
80  
86  
125V/15A  
125V/15A  
5-15P  
5-15P  
Indoor Air  
Circulation  
(CFM)  
Refrigerant  
Charge)  
(410 A)  
Locked  
Rotor  
Amps  
Net  
Weight  
(lbs.)  
Cooling Capacity  
BTU/h  
Dimensions  
(W” x H” x D”)  
Dehumidification  
(Pints/Hour)  
Circuit  
Rating  
Plug Face  
(NEMA#)  
Model  
Voltage / Hz  
Amps  
Watts  
P09B  
P12B  
10000  
12000  
115/60  
115/60  
10.8  
11.5  
1200  
1300  
19.25” x 33.62” x 15.55”  
19.25” x 33.62” x 15.55”  
4.2  
4.2  
224  
235  
21.2  
24.7  
50  
50  
77.2  
81.6  
125V/15A  
125V/15A  
5-15P  
5-15P  
7
PRECAUTIONS FOR USE  
Make sure the unit is installed in an accessible location.  
Do not locate the unit in direct sunlight so as to avoid discoloration of the plastic.  
Keep the unit 1 meter away from television sets or radios to avoid the risk of electromagnetic interference.  
Ensure that the discharge air outlet is free from obstructions and not impeded by walls or other structures.  
Operate the unity ONLY in the upright position.  
When unplugging the unit, hold the power plug securely and pull it out carefully.  
Do not use damaged or improper AC socket.  
WARNING  
EXPLOSION HAZARD  
Do not use the unit near gas appliances, or  
in the vicinity of flammable liquids.  
Failure to follow this warning could result in  
serious injury or death.  
8
CONTROL PANEL OPERATION  
Dehumidifying and cooling operation  
The operating range for cooling operation is 60°F - 90°F,  
and the operating range for dehumidifying is 68°F - 88°F.  
Mode control  
The mode control has three settings– Cool, Dehumidify  
and Fan. The settings are adjusted with the Mode Control  
button. A light will indicate which setting is currently being  
used.  
Power source  
• The AC socket must be firm and reliable.  
• Don’t connect the portable air conditioner to a multiple  
socket outlet which is also being used for other electrical  
appliances.  
Cooling operation  
1. Press MODE button to choose the cooling mode, LCD  
window will show “cool”.  
During the cooling operation, always place the air exhaust  
hose through an open window.  
• Insert the AC power plug securely into the AC socket before  
using the unit, when it beeps after two seconds, press ON/  
OFF button, the unit begins to run.  
-
2. Repeatedly press TEMP + or TEMP button to set a  
proper room TEMP. between 60°F - 90°F.  
LCDI power cord information  
All Friedrich portable air conditioners are shipped from the  
factory with a Leakage Current Detection Interrupter (LCDI)  
equipped power cord. The LCDI device meets the UL and  
NEC requirements for cord connected air conditioners effec-  
tive August 2004.  
3. Press FAN SPEED button to choose between low,  
medium and high speeds.  
NOTE:  
In order to improve the cooling efficiency:  
a) If your room is directly exposed to the sun, draw the  
curtains.  
To test your power supply cord:  
b) Do not place near other heat source.  
1. Plug power supply cord into a grounded 3 prong outlet.  
2. Press RESET (See drawing below).  
3. Press TEST (listen for click; Reset button trips and pops  
Dehumidifying Operation  
out).  
1. Keep the windows and the doors closed to aid in effectively  
dehumidifying the room.  
4. Press and release RESET (listen for click; Reset button  
latches and remains on). The power supply cord is ready  
for operation.  
2. Press MODE button to choose the dehumidifying mode,  
LCD window will show “DRY”, the fan speed cannot be  
adjusted.  
NOTE: LCDI device is not intended to be used as a switch.  
Once plugged in the unit will operate normally without the  
need to reset the LCDI device.  
When used as dehumidifier only it is not necessary to install  
the exhaust hose.  
If the device fails to trip when tested or if the power supply  
cord is damaged it must be replaced with a new supply cord  
from the manufacturer. We recommend you contact our  
Technical Assistance Line at (800) 541-6645. To expedite  
service, please have your model and serial number available.  
Time Set Function  
To set the time to start the machine, with the unit off (but power  
supplied), press TIMER button, the LCD window will show  
”, continually press the TIMER button, set the preferred  
start time. The setting range is 1-24 hours.  
WARNING: NEVER  
CUT OR REMOVE  
THE GROUNDING  
PRONG FROM  
PLUG. NEVER USE  
EXTENSION CORDS  
TO OPERATE AN  
To set the time to stop the machine, with the unit running,  
press TIMER button, the LCD window will show “  
”,  
continually press the TIMER button ,set the preferred time to  
stop the machine. The setting range is 1-24 hours  
NOTE: During timer mode if the TIMER button is pressed  
again it will cancel the timer operation.  
Test Button  
Reset Button  
AIR CONDITIONER.  
Warning Light  
Condensed water may accumulate in the unit. If the internal  
tank becomes full, the Warning Light will come on and the  
unit will not operate until the unit has been drained.  
9
REMOTE CONTROL  
Air Conditioner Remote Control  
The functions work the same as your air conditioner’s touch controls.  
All key function can be accessed from the remote control.  
Power Control  
LCD Display  
On/Off  
Time/Temperature Set Control  
Fan Speed Control  
Used for adjusting the timer and  
temperature  
The default display on control  
panel is room temperature.  
: HIGH  
: MED  
:LOW  
When the " " or the "  
"
button is pressed in cool mode,  
the set temperature is displayed  
and may be adjusted. After 15  
seconds the display will revert  
back to room temperature.  
On / Off Timer Control  
In running mode:  
Auto switch off  
In standby mode:  
Auto switch on  
Timer setting is available from  
1-24 hours by pressing the  
button " " on " ".  
Press the " " or the "  
"
button to adjust the time setting  
for 1 hour interval.  
Mode Control  
Press this button to change the  
operation mode in the order of:  
Farenheit/Celsius Button  
Cool  
Dehumidify  
Notes:  
Fan  
- Do not drop the remote control.  
- Do not place the remote control in a  
location exposed to direct sunlight.  
- The remote control should be placed  
about 1 meter or more away from TV,  
or any electrical appliances.  
Battery replacement: Remove the cover on the back of the remote control and insert the batteries with the (+) and (-)  
poles pointing in the proper direction.  
CAUTION  
Use only AAA or IEC R03 1.5V batteries.  
Remove the batteries if the remote control is not used for a month or longer.  
Do not attempt to recharge the supplied batteries.  
All batteries should be replaced at the same time, do not mix old battery.  
Do not dispose of the batteries in a fire as they may explode.  
10  
WINDOW ADAPTER KIT INSTALLATION  
Window adapter kit  
An installation parts kit is packed with your unit in a separate  
Window panel extensions  
Window panel  
carton. Before you discard the packaging that your unit came  
in, please locate the carton that contains these parts and  
ensure that all parts are present.  
• Window panel - Attaches to window opening to allow air  
exchange for system air transfer.  
• Window panel extensions - Extends window panel to fit  
windows of various dimensions.  
Screws  
Tube adapters - Connect air exchange tubes to window  
Tube Adapters  
panel.  
• Screws - 12 screws are included for assembling the  
window adapter kit. Some screws may be partially  
assembled onto window panel.  
• Air exchange tubes - Exchanges air between the unit  
and outdoors.  
Minimum window extension  
Maximum window extension  
Minimum hose extension  
Maximum hose extension  
26"  
46"  
20"  
60"  
Air Exchange Tubes  
Instructions for assembling the window adapter kit  
Back of  
window panel  
1. Insert tube adapters through the back of the window panel.  
2. Secure each tube adapter with four screws through the  
front of the window panel.  
3. Insert window panel extensions into window panel. Lightly  
tighten the screws in the window panel to hold the  
extensions in place.  
Tube Adapters  
Window Panel  
Extension screws  
Window Panel  
Extension  
Window Panel  
11  
Installing the window adapter kit  
Note: The window adapter kit must be installed and  
connected for the air conditioner to work properly in Cool  
mode. The window adapter kit is not required when using  
the unit in Dehumidify or Fan modes.  
Your window adapter kit has been designed to fit most  
standard vertical and horizontal window applications.  
However, it may be necessary for you to modify some  
aspects of the installation procedures for certain types of  
windows.  
1. Open window.  
2. Place window panel with extensions into window frame  
and adjust to width of window.  
Window adapter kit may be installed vertically as well as  
horizontally. This installation may also be used for crank  
style windows.  
3. Tighten the four screws on the window panel to secure  
the window panel extensions.  
4. Close window.  
5. The window adapter kit should now fit securely within the  
window frame and you can now attach the air exchange  
tubes.Ifyouarehavingtroubleattachingtheairexchange  
tubes, you may attach the tubes prior to installing the  
window adapter kit.  
Attaching the air exchange tubes to the air  
conditioner  
1. Attach the tubes to the window adapter kit.  
2. Attach the other end to the air conditioner.  
To attach air exchange tubes: push tube onto tube adapter  
and twist until the tab is in place in the hole on the tube.  
To remove air exchange tubes: twist the end until the tab is  
clear of the hole in the tube and pull off.  
Do not attach the tubes if using the unit in dehumidify  
mode.  
Maintain a clear distance (from walls, furniture, etc.)  
of at least 10 inches around the unit to allow proper  
air circulation and prevent damage to the unit.  
Important: Do not over-stretch the exhaust tube or  
make any unnecessary bends in it.  
12  
CONDENSATION HANDLING  
Your ZoneAire® Portable Air Conditioner is designed to  
evaporate the condensation removed from the interior space  
through the exhaust hose. Under certain conditions it is  
possible that the unit will not evaporate 100% of the removed  
moisture.  
Draining Water  
The water can be drained from the unit by removing the base  
stopper and letting the water drain by gravity.  
1. When the WATER FULL lamp is on unplug the unit  
and move the unit to a suitable location for draining the  
condensation.  
The unit is designed with a built-in reservoir to accumulate  
excess condensate and help dispose of it.  
2. Using the gravity drain method, ensure that the base  
stopper is located above a suitable area for draining the  
condensate and remove the stopper. Re-install the stopper  
once all water has drained.  
Internal Water Level  
1. Under any mode if the water level is in the “low” area the  
unit will function normally.  
3. Return the unit to the original location and restore power  
and duct connections.  
2. If the water level is in the “normal” area the unit will  
continue to function normally while internally evaporating  
the condensate.  
4. The WATER FULL indicator should be off and the unit will  
return to normal operating mode.  
3. If the unit cannot evaporate all of the condensate internally,  
the tank may become full. If the tank becomes full, the unit  
will turn off, and the Water Full light will illuminate.  
Permanent Drainage  
For permanent and continuous drainage, a 1/2" hose may be  
attached to the unit and led down a drain.  
Drain Valve  
13  
MAINTENANCE / SERVICE  
WARNING  
RISK OF ELECTRIC SHOCK  
Unplug and/or disconnect all electrical power  
to the unit before performing inspections,  
maintenances or service.  
Failure to do so could result in electric shock,  
serious injury or death.  
Cleaning the air filter  
If the air filter is blocked with a lot of dust, the air flow volume  
will be reduced. Clean the filter once every two weeks.  
Open and clean the air filter:  
1. Pull the filter out as shown in the drawing.  
2. Take out the air filter from the filter cover.  
3. Wash the air filter by immersing it gently into warm (about  
40°C or 104°F) water with a neutral detergent or vacuum  
the filter clean.  
4. Rinse the filter and dry it thoroughly in a shaded place.  
5. Install the air filter back to its original place.  
Preparation for storage  
1. Turn off the air conditioner, disconnect the power.  
2. Perform proper maintenance to the air filter and other  
parts.  
Cleaning the air conditioner  
Clean the surface of the unit with a damp cloth, then dry us-  
3. Open the base stopper to drain out all of the water from  
the base. Operating the unit in fan only mode for 12 hours  
will help ensure there is no moisture within the unit.  
ing a duster or similar.  
Do not use chemical solvent (like benzene or alcohol) to  
clean the surface of the unit. If you do so, the surface may  
be scratched, damaged or even cause the case to become  
deformed.  
4. Cover the unit to prevent dust or filth from entering the unit.  
Drain valve  
Prior to operating seasons  
1. Check to ensure that the air inlets and outlets of the unit  
are not blocked.  
2. Make sure that air filter is properly in place before operat-  
ing the machine. If the machine is operated with air filter  
removed, dust and foreign objects will result in faulty per-  
formance of the air conditioner.  
14  
TROUBLESHOOTING  
15  
TROUBLESHOOTING  
Unblock  
(below72 F)  
The compressor bolts are  
loose or copper tubes are  
contacting other metal parts  
Tighten bolts  
Adjust copper tubes  
16  
REFRIGERATOR SYSTEM DIAGRAM  
SCHEMATIC WIRING DIAGRAM  
17  
Friedrich Air Conditioning Company  
P.O. Box 1540  
San Antonio, TX 78295  
210.357.4400  
PORTABLE AIR CONDITIONERS  
LIMITED WARRANTY  
FIRST YEAR  
ANY PART: If any part supplied by FRIEDRICH fails because of a defect in workmanship or material within twelve months from  
date of original purchase, FRIEDRICH will repair the product at no charge, provided the product is transported to a Friedrich  
Authorized Service Center for repair. ALL transportation charges are the sole responsibility of the owner. This remedy is expressly  
agreed to be the exclusive remedy within twelve months from the date of the original purchase.  
SECOND THROUGH FIFTH YEAR  
SEALED REFRIGERANT SYSTEM: If the Sealed Refrigeration System (defined for this purpose as the compressor, condenser  
coil, evaporator coil, reversing valve, check valve, capillary, filter drier, and all interconnecting tubing) supplied by FRIEDRICH in  
your Room Air Conditioner fails because of a defect in workmanship or material within sixty months from date of purchase,  
FRIEDRICH will pay a labor allowance and parts necessary to repair the Sealed Refrigeration System; PROVIDED FRIEDRICH will  
not pay the cost of diagnosis of the problem, removal, freight charges, and transportation of the air conditioner to and from the  
Service Agency, and the reinstallation charges associated with repair of the Sealed Refrigeration System. All such cost will be the  
sole responsibility of the owner. This remedy is expressly agreed to be the exclusive remedy within sixty months from the date of the  
original purchase.  
APPLICABILITY AND LIMITATIONS: This warranty is applicable only to units retained within the Fifty States of the U.S.A., District  
of Columbia, and Canada. This warranty is not applicable to:  
1. Air filters or fuses.  
2. Products on which the model and serial numbers have been removed.  
3. Products which have defects or damage which results from improper installation, wiring, electrical current  
characteristics, or maintenance; or caused by accident, misuse or abuse, fire, flood, alterations and/or misapplication  
of the product and/or units installed in a corrosive atmosphere, default or delay in performance caused by war,  
government restrictions or restraints, strikes, material shortages beyond the control of FRIEDRICH, or acts of God.  
OBTAINING WARRANTY PERFORMANCE: Service will be provided by the FRIEDRICH Authorized Dealer or Service  
Organization in your area. They are listed in the Yellow Pages. If assistance is required in obtaining warranty performance, write  
to: Room Air Conditioner Service Manager, Friedrich Air Conditioning Co., P.O. Box 1540, San Antonio, TX 78295-1540.  
LIMITATIONS:  
THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER WARRANTIES. Anything in the warranty  
notwithstanding, ANY IMPLIED WARRANTIES OF FITNESS FOR PARTICULAR PURPOSE AND/OR MERCHANTABILITY  
SHALL BE LIMITED TO THE DURATION OF THIS EXPRESS WARRANTY. MANUFACTURER EXPRESSLY DISCLAIMS AND  
EXCLUDES ANY LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGE FOR BREACH OF ANY EXPRESSED OR  
IMPLIED WARRANTY.  
NOTE: Some states do not allow limitations on how long an implied warranty lasts, or do not allow the limitation or exclusion of  
consequential or incidental damages, so the foregoing exclusions and limitations may not apply to you.  
OTHER: This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.  
PROOF OF PURCHASE: Owner must provide proof of purchase in order to receive any warranty related services.  
All service calls for explaining the operation of this product will be the sole responsibility of the consumer.  
All warranty service must be provided by an Authorized FRIEDRICH Service Agency, unless authorized by FRIEDRICH prior to  
repairs being made.  
18  
20  
TECHNICAL SUPPORT  
CONTACT INFORMATION  
FRIEDRICH AIR CONDITIONING CO.  
Post Office Box 1540 · San Antonio, Texas 78295-1540  
4200 N. Pan Am Expressway · San Antonio, Texas 78218-5212  
(210) 357-4400 · FAX (210) 357-4490  
Printed in the U.S.A.  
FRIEDRICH AIR CONDITIONING CO.  
Post Office Box 1540 · San Antonio, Texas 78295-1540  
4200 N. Pan Am Expressway · San Antonio, Texas 78218-5212  
(210) 357-4400 · FAX (210) 357-4490  
PORT-ServMan (04-09)  
Printed in the U.S.A.  

Brother MFC 3200c User Manual
Carrier 48EZ A User Manual
Danby DPAC 9009 User Manual
Friedrich Air Conditioner SL25 User Manual
Friedrich WALLMASTER WS12 User Manual
Fujitsu Air Conditioner UTB UUB User Manual
Graco Baby Accessories User Manual
Heat Controller Inc Air Conditioner BG 123G User Manual
Heat Controller Inc Air Conditioner VMC09SB 1 User Manual
HP Hewlett Packard Hewlett Packard Air Conditioner 3563A User Manual