G2623
Instructions
Please keep this instruction sheet for future reference,
as it contains important information.
Requires four “D” batteries for operation (included).
Adult assembly is required for battery replacement.
Tool required for battery replacement:
Phillips screwdriver (not included).
Lullabye Birdies™ Soother
Crib Attachment
WARNING
To prevent entrapment of
baby’s head, keep distance
between the bottom of the
product and the crib mattress
to at least 7 inches.
• Tie the toy’s strings to a crib spindle.
Note: It is better to tie the strings in a
knot than a bow, since a bow may be
easily untied.
Bottom
of Product
Mattress
• Make sure the distance between
the bottom of the product and the
crib mattress is at least 7 inches.
• If the distance is less than 7 inches:
readjust the attachment straps
to lift the product; or lower the
crib mattress.
IMPORTANT! If this toy is attached
to a crib side rail that can be low-
ered and raised, make sure it is in
the raised (locked) position when-
ever a child is in the crib.
3
Soothing Sights and Sounds
Volume
Switch
Power/Mode
Switch
Songs and
Sounds Button
Press to activate
sounds and lights.
Press again to stop.
Songs and
Power/Mode Switch
Sounds Button
Slide the switch to the off position
when the toy is not in use.
Listen to about 10 minutes of
music only.
Enjoy music, soft lights and
fluttering birdies.
Press to choose from four
different songs or two selections
of nature sounds.
Slide to this position for music,
soft lights and fluttering birdies
plus a special projector shines a
light show on the ceiling.
Volume Switch
Slide to either low, medium
or high volume.
©2004 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
G2623pr-0920
PRINTED IN CHINA
4
Battery
Replacement
Battery Safety
Information
Batteries may leak fluids that can
cause a chemical burn injury or ruin
your toy. To avoid battery leakage:
• Do not mix old and new batteries or
batteries of different types: alkaline,
standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Insert batteries as indicated inside
the battery compartment.
• Remove batteries during long
periods of non-use. Always remove
exhausted batteries from the toy.
Dispose of batteries safely. Do not
dispose of batteries in a fire. The
batteries may explode or leak.
• Never short-circuit the battery
terminals.
• Use only batteries of the same or
equivalent type, as recommended.
• Do not charge non-rechargeable
batteries.
• Remove rechargeable batteries from
the toy before charging.
• If removable, rechargeable batteries
are used, they are only to be
charged under adult supervision.
Battery Compartment Door
For best results, we recommend
replacing the batteries that came
with this toy with four, new “D”
(LR20) alkaline batteries.
• Loosen the screws in the battery
compartment door with a Phillips
screwdriver. Remove the battery
compartment door.
• Insert four “D” (LR20) alkaline
batteries.
Hint: We recommend using alkaline
batteries for longer battery life.
• Replace the battery compartment
door and tighten the screws with
a Phillips screwdriver. Do not
over-tighten.
• If sounds, lights or motions from this
toy become faint or stop, it’s time
for an adult to change the batteries.
1.5V x 4
“D” (LR20)
SHOWN
ACTUAL SIZE
5
FCC Note
Care
(United States Only)
• To clean, wipe the surface of this
toy with a damp cloth. Do not
immerse this toy.
Note: This equipment has been
tested and found to comply with the
limitsfor a Class B digital device,
pursuant to Part 15 of the FCC Rules.
Theselimits are designed to provide
reasonable protection against harmful
interference in a residential installa-
tion. This equipment generates, uses
and can radiate radio frequency
energy and, if not installed and used
in accordance with the instructions,
may cause harmful interference to
radio communications. However, there
is no guarantee that interference will
not occur in a particular installation.If
this equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to
• Do not drop this toy on a hard surface.
• This toy has no consumer service-
able parts. Please do not take this
toy apart.
Consumer Information
Questions? We’d like to hear
from you!
Call Fisher-Price® Consumer Relations,
toll-free at 1-800-432-KIDS (5437),
8 AM - 6 PM EST Monday through
Friday. Hearing-impaired consumers
using TTY/TDD equipment, please call
1-800-382-7470. Or, write to:
Fisher-Price®
Consumer Relations
636 Girard Avenue
East Aurora
New York 14052
correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between
the equipment and receiver.
• Consult the dealer or an experienced
radio/TV technician for help.
Note: Changes or modifications not
expressly approved by the
manufacturer responsible for
compliance could void the user’s
authority to operate the equipment.
For countries outside the United States:
CANADA: Questions? 1-800-567-7724. Mattel Canada Inc., 6155 Freemont Blvd., Mississauga,
Ontario L5R 3W2.
GREAT BRITAIN: Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500302.
AUSTRALIA: Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121
Australia. Consumer Advisory Service 1300 135 312.
NEW ZEALAND: 16-18 William Pickering Drive, Albany 1331, Auckland.
ASIA: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City,
Tsimshatsui, HK, China.
6
|