Remanufacturing Instructions
Dell 1100 / Samsung ML 1610
For Technical Support, please call Memphis, TN at (888) 757-0762 or Nashua, NH at (888) 627-6555.
Reference Information:
Dell # 3106640
Samsung # ML1610
Oasis Products:
Toner: D3TN1070
Drum: D3DR305
Wiper Blade: D3WB20
Fuse: 99FZ10
OEM Yields:
2000 @ 5% coverage
1. On the end cap where the contacts are
located, remove the two screws that secure
the end cap (Fig. 1).
Fig. 1
2. Using a small flat screw driver, release
the locking tab on the bottom side of the
end cap (Fig. 2).
Fig. 2
Remanufacturing Instructions
Dell 1100 / Samsung ML 1610
Technical Support
Memphis, TN (888) 757-0762
Nashua, NH (888) 627-6555
© 1998 Oasis Imaging Products, Inc.
Page 1 of 9
6. Remove the two screws that hold the
opposite end cap in place (Fig. 6).
Fig. 6
7. Use a small flat screw driver to pry up the
end cap to remove it (Fig. 7).
Set the toner hopper to the side.
Fig. 7
8. Remove the two screws that secure the
wiper blade to the waste bin (Fig. 8).
Fig. 8
Remanufacturing Instructions
Dell 1100 / Samsung ML 1610
Technical Support
Memphis, TN (888) 757-0762
Nashua, NH (888) 627-6555
© 1998 Oasis Imaging Products, Inc.
Page 3 of 9
9. Remove the wiper blade. Clean all residual
toner from the waste bin. Inspect the recovery
blade. Replace the wiper blade and set the
waste bin to the side for reassembly (Fig. 9).
Fig. 9
10. Remove the four gears from the side
of the toner hopper (Fig 10).
Fig.10
11. Remove the PCR by sliding it toward
the gear end of the cartridge and lifting the
post once clear from the Saddle (Fig. 11).
Clean PCR and set aside for Reassembly.
Fig. 11
Remanufacturing Instructions
Dell 1100 / Samsung ML 1610
Technical Support
Memphis, TN (888) 757-0762
Nashua, NH (888) 627-6555
© 1998 Oasis Imaging Products, Inc.
Page 4 of 9
12. Remove the drum and replace during
reassembly (Fig. 12).
Fig. 12
13. Remove the fill plug and clean out
residual toner from the hopper.
Using a small flat screw driver, pry up the
locking tab that secures the developer roller
stabilizer plate (Fig. 13).
Fig. 13
14. Lift up the end of the small spring
that comes in contact with the developer
roller end post, and then remove the
stabilizer plate (Fig.14).
Fig. 14
© 1998 Oasis Imaging Products, Inc.
Page 5 of 9
15. Remove the developer roller and clean
with compressed air and a lint free, wax free
wipe (Fig.15).
Fig. 15
16. Remove the two screws that secure the
doctor blade to the toner hopper (Fig. 16).
Fig. 16
17. The opposite end of the spring, that
rides on the developer roller post, sits in a
small notch on the doctor blade. Move the
spring to the end of the doctor blade, so not
to damage it during removal of the blade.
Make a note of the orientation of the spring
for reassembly (Fig. 17).
Fig. 17
Remanufacturing Instructions
Dell 1100 / Samsung ML 1610
Technical Support
Memphis, TN (888) 757-0762
Nashua, NH (888) 627-6555
© 1998 Oasis Imaging Products, Inc.
Page 6 of 9
18. Remove the doctor blade, clean
thoroughly, and set to the side for
reassembly (Fig. 18).
Fig. 18
19. Clean the adder roller thoroughly with
compressed air, and then clean the toner
hopper of all residual toner (Fig. 19).
Fig. 19
20. Clean, inspect and replace all
components. Add toner and reassemble
in reverse order (Fig. 20).
Fig. 20
Remanufacturing Instructions
Dell 1100 / Samsung ML 1610
Technical Support
Memphis, TN (888) 757-0762
Nashua, NH (888) 627-6555
© 1998 Oasis Imaging Products, Inc.
Page 7 of 9
Fig. 21
21. Replace or add (starter carts have no
fuse) a fuse that is located on the right front
corner of the cartridge for the Dell 1100 (Fig.
21).
Remanufacturing Instructions
Dell 1100 / Samsung ML 1610
Technical Support
Memphis, TN (888) 757-0762
Nashua, NH (888) 627-6555
Oasis and You … Succeeding Together!
New Hampshire
(603) 880-3991
(888) 627-6555
Tennessee
(901) 433-0334
Fax: (901) 366-9756
Texas
Canada
(972) 671-1307
(888) 591-3555
Fax: (972) 671-1359
(905) 612-9701
(800) 430-7886
Fax: (905) 612-0683
Fax: (603) 598-4277
Illinois
California
North Carolina
(919) 776-0847
(866) 399-8558
Fax: (919) 776-0898
Europe
Netherlands
011-31-24-388-2233
Fax: 011-31-24-355-7373
(630) 982-1543
(888) 658-4555
Fax: (630) 928-1542
(714) 283-6270
(888) 656-9555
Fax: (714) 283-6276
© 2003 Oasis Imaging Products, Inc. Any attempt to reproduce any part of these instructions without the written consent of
Oasis Imaging Products, Inc. may result in legal action. All registered trademarks are the property of their respective owners.
© 1998 Oasis Imaging Products, Inc.
Page 8 of 9
© 1998 Oasis Imaging Products, Inc.
Page 9 of 9
|