IMI CORNELIUS INC
One Cornelius Place
Anoka MN 55303--6234
Telephone (800) 238--3600
Facsimile (612) 422--3246
FOR
ED2XX DUAL-MOUNTING KIT
DISPENSER MODEL
ED200/250
KIT PART NUMBER
629085101
PARTS LIST
Item
No.
Part No.
629080214
29677
Name
Qty.
1
2
3
4
5
6
7
8
9
Insulated Lower Panel, Dual
1
Rear Mounting Plate
1
620023904
32990
Front Mounting Plate (For 6 and 8 Beverage Valve Units)
Wire Connectors
1
4
50904
RTV Sealant, 3--oz Tube
Drip Tray Cover, Black
2
620013301
620500201
620914101
70555
1
Gasket
150-In
Installation Instructions
1
2
2
1
Screw, No. 8-32 By 1 5/16-In. long
Captivating Plastic Washer, No. 8
Cornelius Logo
10 71010
11 91486
1. Disconnect electric power to the Ice/Beverage Units while installing the Kit.
2. Remove lower panel assembly from both Units.
3. Relocate beverage valve keyswitch to right side of the beverage panel on one of the Units. This Unit will be
positioned on the right side of the counter.
A. Remove beverage panel access covers.
B. Locate black and red wires of the keyswitch. Cut these wires approximately 2-inches from the crimp
nut connection to the yellow wires.
C. Loosen the keyswitch mounting nut and remove the keyswitch. Using a 7/8-inch deep socket will help
access the nut.
D. Remove plastic plug from right side of the beverage panel and insert into the left side keyswitch
opening.
E. Install keyswitch into the right side of the beverage panel and tighten mounting nut.
December 9, 1998
Rev A
E IMI Cornelius Inc; 1998
APPLY GASKET
KEYSWITCH
BETWEEN SIDES OF
KEYSWITCH
11
FRONT MOUNTING PLATE
3
60 3/8
60 5/8
FIGURE 1.
AS REQ’D
REAR MOUNTING
PLATE
1
9
10
FRONT MOUNTING PLATE
3
SEAL WITH RTV
6
AS REQ,D
BEVERAGE PANEL
ACCESS COVER
KEYSWITCH
FIGURE 2.
3
620914101
|