Quick Reference Guide
Q-Wash 560Z-LED QRG
12 or 15-channel RGBWA LED moving yoke wash product
Features
Pan: 540
Tilt: 270
RGBWA color static mixing with or without DMX control
Vector speed channel for RGBWA color mixing
Variable zoom
Variable electronic strobe
Continuously variable electronic dimmer (0~100%)
Built-in automated programs
Remote product reset and vector speed channel
255-step fully customizable program
Recall auto or custom programs via control panel or DMX
Color temperature presets (3,200~10,000 K)
This product has an auto-ranging power supply that works with an input
voltage range of 100~240 VAC, 50/60 Hz.
AC Power
1. Disconnect the unit from the power outlet.
2. With a flat head screwdriver, wedge the fuse holder out of the housing
and remove the blown fuse from the holder.
Fuse
Replacement
3. Replace the blown fuse with a fuse of the exact same type and rating.
4. Insert the fuse holder back in place and reconnect the power.
Before mounting this product, read the Safety Notes at the beginning of this
guide and on page 2 of the product’s User Manual. Then, follow the
mounting procedure indicated in the Setup chapter of the User Manual.
Mounting
Safety cable (included)
C Clamps (not included)
Omega brackets (included)
Product
Mounting
Diagram
Overhead Mounting
Floor Mounting
Page 3 of 8
Q-Wash 560Z-LED QRG
Menu Options
1st Level
2nd Level
ADDRESS
RESET
3rd Level
001~512
NO/YES
HIGH
Description
Selects a starting DMX address
Resets the product’s custom settings
Select the fan’s operation mode.
NORMAL
LOW
AUTO
NOTE: Product’s controller will force the fan to High if the
product’s internal temperature becomes too high, despite any
manual or DMX setting
FAN
DMX512
AUTO 1
AUTO 2
Selects DMX running mode
Selects the first automatic program
Selects the second automatic program
RUN
CUSTOM Selects the user customizable program
INTRO
SLAVE
TEST
BASIC
Selects the Slave running mode
Starts the product’s test sequence
Selects the 11-channel DMX mode
CHANNELS
ADVANCED Selects the 15-channel DMX mode
60 CLOSE Turns off the display after 60 seconds
BRIGHT
NO/YES
DIMMER 4~1 Slow (DIM 4) to fast (DIM1) dimmer curves
DIMMER 0 Linear dimmer
DISPLAY
KEYLOCK
DIMMER
Keeps the display on
Activates/deactivates the control panel password
INFO
Pan
Tilt
Dimmer
Use
EDITION
Shows the version of the installed S/W
Defines the pan direction
Defines the tilt direction
Defines the direction of the dimmer fader
Activates the changes
NORMAL/
REVERSE
INVERT
RANGE
NO/YES
P/Start
P/Finish
T/Start
T/Finish
Use
Sets the pan start point (restricted range)
Sets the pan end point (restricted range)
Sets the tilt start point (restricted range)
Sets the tilt end point (restricted range)
Activates the changes
000~255
Black delay
NO/YES
DMX
Activates the move-in black delay (3 s)
The DMX controller can reset the product
Reset
SYSTEM The control panel can reset the product
LEDs illuminate at normal or high intensity
NOTE: Product will return to Normal if temperature becomes too
high
NORMAL/
HIGH
Power
SPECIAL
UC
White output matches that of older products
Color
Fan
RGBTOW White output set by RGB-W
OFF
DMX
White output defined by RGBW faders
The DMX controller can set the fan speed
SYSTEM The control panel can reset the fan speed
Selects the program step
Selects the pan position
STEP
PAN
TILT
Selects the tilt position
SPEED
RED
Selects the pan/tilt speed
000~255
EDIT
GREEN
BLUE
WHITE
AMBER
Combines red, green, blue, white, and amber to obtain a custom
color
Continues in the next page
Page 4 of 8
Q-Wash 560Z-LED QRG
Continued from previous page
1st Level 2nd Level
3rd Level Description
DIMMER
STROBE
Selects the dimmer value
Selects the strobe frequency and mode
Select the zoom position
ZOOM
DIMSPEED
TIME
000~255
EDIT
(Cont.)
Selects the dimmer speed
Selects the step duration
USE
No/Yes
Activates the changes
****
EXTRA
PASSWORD
Opens the Extra menu (see below)
Extra Menu
1st Level 2nd Level 3rd Level 4th Level
Description
Red
3200 K
3400 K
4200 K
4900 K
5600 K
5900 K
6500 K
7200 K
8000 K
8500 K
10000 K
Green
Blue
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
Red
Green
Blue
No/Yes
000~255 Sets color temperature for Macro > White 1
000~255 Sets color temperature for Macro > White 2
000~255 Sets color temperature for Macro > White 3
000~255 Sets color temperature for Macro > White 4
000~255 Sets color temperature for Macro > White 5
000~255 Sets color temperature for Macro > White 6
000~255 Sets color temperature for Macro > White 7
000~255 Sets color temperature for Macro > White 8
000~255 Sets color temperature for Macro > White 9
000~255 Sets color temperature for Macro > White 10
000~255 Sets color temperature for Macro > White 11
000~255 Sets color temperature for Special > Color > RGBtoW
Calib
RGB-W
Default
Default
N/A
Defaults the product to factory settings
Page 5 of 8
Q-Wash 560Z-LED QRG
DMX Values
Channel Function
Value
000 255 0~540º
000 255 0~270º
000 255
000 255
000 255 0~100%
Percent/Setting
BASIC
1
2
3
4
5
6
7
Pan
Tilt
Red
Green
Blue
White
Amber
0~100%
0~100%
000 255 0~100%
000 255 0~100%
000 005 No function
006 010 High power
011 030 R: 100% G: Up
B: 0%
031 050 R: Down G: 100% B: 0%
051 070 R: 0%
071 090 R: 0%
091 110 R: Up
111 130 R: 100% G: 0%
131 150 R: 100% G: Up
G: 100% B: Up
G: Down B: 100%
G: 0%
B: 100%
B: Down
B: Up
151 170 R: Down G: Down B: 100%
Power and Color 171 200 R: 100% G: 100% B: 100% W: 100%
8
Macro
201 205 White 1: 3200 K
206 210 White 2: 3400 K
211 215 White 3: 4200 K
216 220 White 4: 4900 K
221 225 White 5: 5600 K
226 230 White 6: 5900 K
231 235 White 7: 6500 K
236 240 White 8: 7200 K
241 245 White 9: 8000 K
246 250 White 10: 8500 K
251 255 White 11: 10,000 K
000 255 0~100%
9
Dimmer
Strobe
Zoom
000 009 No function
10
11
010 255 01~20 Hz
000 255
6~37º
000 019 No function
020 039 Pan/tilt black activation
040 059 Pan/tilt black deactivation
060 079 Automatic fan speed
080 099 Slow fan speed
100 119 Normal fan speed
120 139 High fan speed
140 149 Auto program 1 (3 s activation delay)
150 159 Auto program 2 (3 s activation delay)
160 169 Test (3 s activation delay)
170 179 Custom program (3 s activation delay)
180 199 No function
12
Control
200 219 Reset (3 s activation delay)
220 235 No function
236 239 DIM0 (3 s activation delay)
240 243 DIM1 (3 s activation delay)
244 247 DIM2 (3 s activation delay)
248 251 DIM3 (3 s activation delay)
252 255 DIM4 (3 s activation delay)
Page 6 of 8
Q-Wash 560Z-LED QRG
Channel Function
Value
000 255 0~540º
Percent/Setting
ADVANCED
1
Pan
2
3
Pan Fine
Tilt
000 255 Fine movement control
000 255 0~270º
4
5
6
7
8
9
10
Tilt Fine
Pan/Tilt Speed
Red
Green
Blue
000 255 Fine movement control
000 255 Fast~Slow
000 255
000 255
0~100%
0~100%
000 255 0~100%
000 255 0~100%
000 255 0~100%
White
Amber
000 005 No function
006 010 High power
011 030 R: 100% G: Up
B: 0%
031 050 R: Down G: 100% B: 0%
051 070 R: 0%
071 090 R: 0%
091 110 R: Up
111 130 R: 100% G: 0%
131 150 R: 100% G: Up
G: 100% B: Up
G: Down B: 100%
G: 0%
B: 100%
B: Down
B: Up
151 170 R: Down G: Down B: 100%
Power and Color 171 200 R: 100% G: 100% B: 100% W: 100%
11
Macro
201 205 White 1: 3200 K
206 210 White 2: 3400 K
211 215 White 3: 4200 K
216 220 White 4: 4900 K
221 225 White 5: 5600 K
226 230 White 6: 5900 K
231 235 White 7: 6500 K
236 240 White 8: 7200 K
241 245 White 9: 8000 K
246 250 White 10: 8500 K
251 255 White 11: 10,000 K
000 255 0~100%
12
13
14
Dimmer
Strobe
Zoom
000 009 No function
010 255 01~20 Hz
000 255 6~37º
000 019 No function
020 039 Pan/tilt black activation
040 059 Pan/tilt black deactivation
060 079 Automatic fan speed
080 099 Slow fan speed
100 119 Normal fan speed
120 139 High fan speed
140 149 Auto program 1 (3 s activation delay)
150 159 Auto program 2 (3 s activation delay)
160 169 Test (3 s activation delay)
170 179 Custom program (3 s activation delay)
180 199 No function
15
Control
200 219 Reset (3 s activation delay)
220 235 No function
236 239 DIM0 (3 s activation delay)
240 243 DIM1 (3 s activation delay)
244 247 DIM2 (3 s activation delay)
248 251 DIM3 (3 s activation delay)
252 255 DIM4 (3 s activation delay)
Page 7 of 8
Q-Wash 560Z-LED QRG
Button
Function
Control
Panel
Description
Exits from the current menu or function
<MENU>
<ENTER>
Enables the currently displayed menu or sets the
currently selected value into the selected function
Navigates upwards through the menu list and increases
the numeric value when in a function
<UP>
Navigates downwards through the menu list and
decreases the numeric value when in a function
<DOWN>
For details on how to program this product, please refer to the product’s
User Manual.
Programming
Password
After being prompted to enter the password, press:
<UP>, <DOWN>, <UP>, <DOWN>, and <ENTER>
World Headquarters
CHAUVET®
General Information
United Kingdom and Ireland
CHAUVET® Europe Ltd.
General Information
Address:
Contact
Us
Address:
5200 NW 108th Avenue
Unit 1C
Sunrise, FL 33351
(954) 929-1115
(954) 929-5560
(800) 762-1084
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK
NG16 6NT
Voice:
Fax:
Toll free:
Voice:
Fax:
+44 (0)1773 511115
+44 (0)1773 511110
Technical Support
Technical Support
Voice:
Fax:
(954) 929-1115 (Press 4)
(954) 756-8015
Email:
Email:
World Wide Web
World Wide Web
Outside the US, United Kingdom, or Ireland, contact your distributor of
record. Follow their instructions to request support or to return a product.
Visit our Web site for contact details.
Q-Wash 560Z-LED QRG – Rev. 06
© Copyright 2011 CHAUVET®
All rights reserved.
Printed in the P. R. C.
Page 8 of 8
|