PaperJet 50e User Guide_se 10-06-2003 10:06 Pagina 1
PaperJet 50E
Plain paper fax, copier and telephone
User Guide
This product is intended to be connected to analogue networks and private switching systems in the United Kingdom.
This product has not been designed for making emergency telephone calls when the power fails. Alternative arrangements
should be made for access to emergency services.
PaperJet 50e User Guide_se 10-06-2003 10:06 Pagina 3
At a glance
Plain paper sheet feeder
Paper support
Max. capacity 40 sheets of
80gsm paper.
Document feeder
Paper feeder width guide
Holds up to 5 sheets placed face
down for faxing or copying.
Adjust to fit the width of your
paper for A4, Letter and Legal
sizes.
Telephone line socket
Document feeder
width guides
Adjust to fit the width
of your document for A4,
Letter and Legal sizes.
Handset
Cover
Open the cover
for changing the
print cartridge
and clearing
Control panel
document jams
Document outlet
Loudspeaker
Display screen
Outlet for received faxes, copied
documents and originals.
3
PaperJet 50e User Guide_se 10-06-2003 10:07 Pagina 4
NOTE:
The control panel
is protected by
a plastic film.
Remove by carefully
peeling from
the corner.
Reduction/Enlargement button. Reduces and
Resolution/Volume – button. Adjust the
enlarges copies to either 70% or 140%.
resolution of documents to be faxed. Select next
option from a menu.
Resolution button. Allows you to choose text or
Decrease loudspeaker volume
photo resolution for copies.
Contrast/Volume + button. Adjust the contrast
of documents to be faxed. Select previous option
from a menu.
Contrast button. Adjusts the contrast of
documents to be copied.
Increase loudspeaker volume
Copy button. Press to start copying a document.
Recall button. For use with switchboards and BT
Error light. Indicates a problem when sending or
Select Services.
receiving a fax.
Speed Dial/Clear button. Used to speed dial a
stored number. Deletes incorrect settings and
characters.
Stop button. Stops the current operation.
Returns the fax machine to standby.
Last Number/Pause button. Press once to
display last number dialled. If you have a
document in the document feeder it shows the last
fax number, if not it shows the last telephone
number called. Press again to dial the number
displayed.When dialling or storing a number,
press to enter a pause.
Monitor button. Press to get dialling tone.
Start button. Press to send a fax. Confirms an
option chosen from the menu. During a call, press
to receive a fax.
Function button. Function button lets you select
options from the menus.
External button. Connects you to an outside line
when connected to a switchboard.
RX Mode/Hold button. Selects reception
methods for faxes. When on a phone call, press to
put a caller on hold. They hear a beep.
3
PaperJet 50e User Guide_se 10-06-2003 10:07 Pagina 5
ge holder
Optical scanner
5
PaperJet 50e User Guide_se 10-06-2003 10:07 Pagina 6
Key features
Plain paper fax
Holds up to 40 sheets of A4 paper for ink
jet quality printing.
21 page memory
If you run out of ink or paper while
receiving a fax the document will be stored
in the memory and automatically printed out when
the new paper or ink has been added.
Copier with zoom
Make single or multiple copies of
documents. Enlarge copies to 140% or
reduce to 70%
One touch and speed dial memories
10 one touch memories and 32 speed dial
memories can each store a fax number,
phone number and name. Easy to display and scroll
through the memories.
6
PaperJet 50e User Guide_se 10-06-2003 10:07 Pagina 7
In this guide
12 Month Guarantee
At a glance
2
3
Key features
6
Introduction
8
Safety information
Setting up
9
10
Using your PaperJet 50E
Sending faxes
To broadcast a document
Using the one-touch memories
Using the speed-dial memories
Reports and lists
16
16
20
22
23
25
27
29
Making and receiving phone calls
Copying documents
Additional features
Polling
30
34
Caller display
36
Connecting to a switchboard
Help
37
39
44
49
51
Maintenance
Technical information
Index
7
PaperJet 50e User Guide_se 10-06-2003 10:07 Pagina 8
Introduction
Unpacking your PaperJet 50E
For your records
When you unpack you should have:
Date of purchase:
PaperJet 50E with attached
mains power cable and
fitted 3-pin plug.
Place of purchase:
Serial number (on base of unit):
Telephone line cord
Starter print cartridge
Handset with cord
Paper support
Proof of purchase is required for warranty purposes,
so please keep your receipt.
8
PaperJet 50e User Guide_se 10-06-2003 10:07 Pagina 9
Safety information
Never put foreign bodies into the fax machine.
Their accidental contact with powered parts may
cause a fire or electric shocks.
Do not expose to direct sunlight.
Do not stand your fax machine on carpets or other
surfaces which generate fibres, or place it in
locations preventing free flow of air over its surfaces.
Do not submerge any part of your fax
machine in water and do not use it in damp
or humid conditions such as bathrooms.
Do not expose your fax machine to fire,
explosive or other hazardous conditions.
There is a slight chance that your fax
machine could be damaged by an electrical
storm. We recommend that you unplug the
power and telephone line cord for the duration of
the storm.
9
PaperJet 50e User Guide_se 10-06-2003 10:07 Pagina 10
Setting up
1 Plan the location of your PaperJet 50E
3 Connect the handset
Place your PaperJet 50E on a stable, flat surface.
Make sure it is close enough to the telephone and
mains power sockets so that cables will reach.
Remember to leave enough room at the front of the
machine for documents to come out. Allow a free
flow of air around the machine for ventilation.
Plug the handset cord into the socket marked
at the back of the machine.
Place the handset in the cradle.
2 Fit the paper support
Fit the plastic support into the slot at the back of the
machine. Ensure it clicks firmly into place.
4 Connect the telephone line cord
1
2
Click into position
1 Plug the telephone line cord into the socket
marked LINE at the back of the machine.
2 Connect the other end to the telephone wall socket.
10
PaperJet 50e User Guide_se 10-06-2003 10:07 Pagina 11
5 Connect the mains power
6. Load paper
The plain paper sheet feeder can hold up to 40 sheets
of 80gsm paper.
IMPORTANT NOTE
Before connecting to the mains power remove the
red tag marked “REMOVE before plugging in” by
pulling in the direction of the arrow.
It can accommodate A4 (210 x 297mm), US Letter
(216 x 279mm), and US Legal (216 x 356mm) and
weights between 70-90gsm.
Maximum Level
Plug into the mains power and switch on.
The fax will automatically carry out a short test to
check the functions of its components and the
following messages will appear in the display:
Place the paper in the sheet feeder. Do not force it in.
AUTOMATIC RX
CHECK PRINT HEAD and alternating
SET DATE/TIME
Use the paper width adjustment lever to push the
paper against the left side of the feeder.
NOTE
When you need to add more paper, always slide it
under the paper that’s already loaded.
11
PaperJet 50e User Guide_se 10-06-2003 10:07 Pagina 12
7 To set the date and time
NOTE
If you have selected the 12 hour clock the letter p
from pm or a for am is displayed. To display the
correct p or a setting press the function button
when the cursor is flashing on the p or a. Press the
clear button to delete entries.
When you connect the fax machine to the power
supply, and following any interruption in the supply you
will need to set the date and time as described below.
The display shows:
DATE AND TIME
The display shows:
FORMAT: DD/MM/YY
NOTE
Remember that the stand-by mode is the status in
which it is idle and that it is the mode from which
the machine can be programmed.
If you want to select a different format from
the one displayed, press the b/ ckeys.
The display shows:
FORMAT: 24 H
If you want to select the other time format
(12-hour), press the b/ ckeys.
The display shows:
DD/MM/YY HH:MM
01-01-02 00:00
/
Enter the new date and time (e.g. 26-07-02;
12:00). As each digit is entered, the cursor
will move to the next one.
DD/MM/YY HH:MM
26-07-02 12:00
If you only want to change a few digits,
move the cursor to them using the b/ c
keys and overwrite them with the correct
digits.
To confirm the setting. The procedure for
setting the date and time is complete. The
new date and time will be updated
automatically and will be printed on each
page sent.
To return the fax machine to stand-by
mode.
12
PaperJet 50e User Guide_se 10-06-2003 10:07 Pagina 13
Pull the cartridge towards the front of the machine
until you hear it click into position.
8 Install the starter print cartridge
Open the printer compartment cover.
Close the cover.
If the display continues to show CHECK PRINT HEAD
the cartridge may not be installed properly. Open
the cover and check that the cartridge is correctly
orientated and clicked into position.
Remove the print cartridge from its packaging.
Holding it by the finger grip, peel the protective film
from the print nozzles.
Click into position
Avoid touching the nozzles and metal electrical
contacts.
NOTE
To replace the cartridge when it runs out of ink,
follow the instructions in the Maintenance Section
on page 44.
Insert the cartridge into the holder with the
electrical contacts facing towards the front of the
machine.
Should the message persist, you may need to clean
the electrical contacts and the carriage (see ‘To clean
the cartridge’, page 46).
13
PaperJet 50e User Guide_se 10-06-2003 10:07 Pagina 14
9 Automatic print quality test page
10 Enter your name and fax number
Your PaperJet 50E automatically cleans the
print nozzles and prints a test page.
Once printed, the display shows
Your name and number will be added to
every fax page you send. You can enter a
maximum of 16 characters and 20 digits.
CHECK PRINT OUT
1=EXIT 0=REPEAT
Press the Function button until the display
shows INSTALLATION
The printed sheet contains the following:
Display shows TEL. LINE SET-UP
Press twice. Display shows STATION NAME
Display shows TYPE YOUR NAME
a numbered scale, to check ink flow and
the electrical circuits on the print head.
•
a set of graphics and text to assess print
quality.
•
A-Z
Press the buttons to enter your name up to a
maximum of 16 characters, as shown below.
Check the numbered scale for interruptions
and the black areas for horizontal white
lines. If none are present, the print head is
installed correctly and working normally.
Press buttons to move the cursor
to the character you want or to insert a
space.
Press the and buttons to enter different
symbols such as ‘&’.
✱
#
Press 1 if the test print is acceptable.
Or
Press the Clear button to delete entries.
Press 0 to repeat the test.
If there is still a problem after printing three
test pages try:
For example to enter the name JOHN:
changing the paper you are using, it may be
too porous.
•
Press the 5 button until the display shows
J
O
H
N
.
.
.
.
removing and re-installing the print cartridge.
•
Press
>
cleaning the electrical contacts and print
nozzles (see ‘To clean the cartridge and
nozzles’, page 46).
•
Press the 6 button until the display shows
Press
>
Press the 4 button until the display shows
Press
replace the cartridge.
•
>
Press the 6 button until the display shows
14
PaperJet 50e User Guide_se 10-06-2003 10:07 Pagina 15
When you have finished entering your name
To confirm. Display shows PHONE NUMBER
Display shows TYPE YOUR NUMBER
11 To set the position of your fax header
Your name, fax number, date and time can
be shown at the top of the page outside the
text area or slightly lower down inside the
text area. The default setting is for the
header to be shown inside the text area.
You can switch between these two positions.
Enter your phone number.
/
If you are entering your number in an
international format press the
button to
✱
enter a
.
+
Press the Function button until the display
shows FAX SET-UP
Press to confirm.
To return to standby.
Display shows DATE AND TIME
Display shows VARIOUS SETTINGS
Press until the display shows HEADER
INSIDE
Your header will be printed inside the text
area.
Press to display INSIDE or OUTSIDE.
To confirm the displayed option.
To return to standby.
15
PaperJet 50e User Guide_se 10-06-2003 10:07 Pagina 16
Using your PaperJet 50E
Setting the contrast and resolution
Sending faxes
What type of paper you can use
After inserting the document in the feeder.
Contrast
Dimensions:
• width
• length
148mm – 216mm.
216mm – 600mm.
Press the Contrast button to select the
setting you want.
• NORMAL – when the original document
is clearly printed.
• DARK – when the original document is
light.
Thickness:
•
•
60 -90gsm
90 -140gsm
max 5 sheets.
1 sheet at a time.
• LIGHT – when the original document is
dark.
Do not use
• Torn, crumpled and rolled paper.
• Paper that is too thin
• Wet or moist paper.
After the fax has been sent, your PaperJet
always resets to normal contrast.
• Carbon paper.
Resolution
• Correction fluid, paperclips and staples.
Press the Resolution button to select the
setting you want.
Inserting documents in the feeder
• STD (standard) – when the original
contains easy to read text.
• Gently insert documents to be faxed (up to 5 pages)
face down.
• Adjust the paper feeder width guides to fit.
• FINE – when the original contains small
or hard-to-read text or line diagrams.
• FINE and HALF-TONES – when the
original contains varying shades of grey
or pictures.
Setting the contrast and resolution
You can choose different resolution and contrast
settings to ensure the best quality when faxing or
copying a document.
NOTE
FINE and HALF-TONES settings take longer to send.
16
PaperJet 50e User Guide_se 10-06-2003 10:08 Pagina 17
To select the default resolution setting
NOTE
If you make a mistake when entering a number,
press the < > buttons to move the cursor over the
digit and enter the correct digit. To delete the digit
press the Clear button.
Your machine is pre-set to STD resolution
for faxing and copying. You can change this
setting so that the resolution is
automatically set to FINE.
NOTE
When the machine is in standby
Press until the display shows FAX SET-UP
To display DATE AND TIME
All dialling is shown using 0-9 keypad. You can also
use one-touch or speed dialling if they are set.
To display VARIOUS SETTINGS
Press until the display shows TX RESOL.STD
To switch between FINE and STD.
To confirm.
To dial and hear the progress of your
fax call
To return to standby.
Place document face down in the document
feeder.
If necessary set the Contrast and
Resolution settings.
To send a fax
Press the Monitor button. You hear the
dialling tone over the loudspeaker.
Place document face down in the document
feeder.
Use the keypad to dial the number you want.
/
When you hear the far end machine
respond press the Start button. Your fax is
scanned and sent.
If necessary set the Contrast and
Resolution settings.
Use the keypad to dial the number you
want.
/
When the fax has been sent, the display
shows TX COMPLETEDto confirm a
successful transmission.
Press the Start button. The number is
dialled before your fax is scanned and sent.
When the fax has been sent, the display
shows TX COMPLETEDto confirm a
successful transmission.
17
PaperJet 50e User Guide_se 10-06-2003 10:08 Pagina 18
Automatic re-dialling
To dial using the handset
If a fax fails to be sent, for example, the number
dialled was engaged, your PaperJet 50E will
automatically retry up to 3 times at 2 minute intervals.
Place document face down in the document
feeder.
If after all retries, the fax has not been sent, the
document will be deleted from memory (if using
MEMORY TX). You have the option of retaining
failed MEMORY TX faxes in memory to enable you
to try sending them again without re-scanning.
To do this you must enable the document
retransmission feature.
If necessary set the Contrast and
Resolution settings.
Pick up the handset and listen via the
earpiece.
Use the keypad to dial the number you want.
/
If the other person’s fax machine is set up
for automatic reception, you hear the fax
tones, press the Start button and replace
the handset. Your fax is scanned and sent.
To switch document retransmission on/off
If your call is answered in person, ask them
to press the start button on their fax
The default setting is off.
Press the Function button until display
shows FAX SETUP
machine. You will then hear their fax tones.
Press the Start button and replace the
Press the Start button. Display shows
DATE AND TIME
handset. Your fax is scanned and sent.
When the fax has been sent, the display
shows TX COMPLETEDto confirm a
successful transmission.
Press the Function button. Display shows
VARIOUS SETTINGS
Press the Start button until display shows
RETRANS.DOC: OFF
NOTE
Press buttons to switch between ON and
OFF.
To stop a fax being sent at any time, press the Stop
button.
Press the Start button to confirm the option
displayed.
The machine returns to standby.
To redial the last number
Press the Last Number button twice.
18
PaperJet 50e User Guide_se 10-06-2003 10:08 Pagina 19
To send a fax at a pre-set time (delayed
faxing)
NOTE
To cancel your pre-set fax transmission, press
the Stop button or remove the document from the
document feeder.
You can set your PaperJet 50E to send a fax
at a specific time in order to take advantage
of cheaper call rates or to allow for different
time zones.
If you want to store the document in memory
for delayed faxing, see “To fax from memory” on
page 20.
Place document face down in the document
feeder.
To change the details of a pre-set fax
If necessary set the Contrast and
Resolution settings.
You can set a new time and fax number.
Press until the display shows DELAYED TX
Display shows ALREADY ENTERED
Display shows CHANGE PARAM?
Either
Press until the display shows DELAYED TX
Press the Start button.
Display shows TYPE TIME
HH:MM
If using the 12 hour clock, press the Function
button to switch between a for AMand p for PM.
Press to display CANCEL SETTING
Press the < > buttons to move the cursor.
To confirm. The fax is cancelled and your
machine returns to standby.
Or
Enter the time at which you want your fax
/
to be sent, e.g. 18.30.
Display shows TYPE TIME
Display shows TYPE FAX NUMBER
1 2 3 Enter the number you want.
Enter the new time at which you want your
fax to be sent, e.g. 19.00
/
Display shows TYPE FAX NUMBER
Press to confirm. Display shows the time at
which the fax is due to be sent
AUTOMATIC RX
Press to confirm. Display shows
AUTOMATIC RX
TX AT
18:30
TX AT
19.00
19
PaperJet 50E user guide – Edition 3 – 29.8.00
PaperJet 50e User Guide_se 1-07-2003 18:18 Pagina 20
Display shows TYPE FAX NUMBER. If
required, enter the second number to which
you want to send your fax and press the
Start button again.
To broadcast a document
You can set your machine to send a document to up
10 different numbers (broadcasting).
See “To fax from memory” below.
Repeat the last 2 steps until you have
entered all the numbers you want up to
maximum of 10 when the display will show
END OF LIST.
To fax from memory
To finish.
Your PaperJet 50E has a memory which lets
you store one document for sending at a
pre-set time.
Place document face down in the document
feeder.
If necessary set the Contrast and Resolution
settings.
To change, re-send or cancel a stored
document
Display shows TX FROM MEMORY
The document is scanned into the memory.
Display shows STORINGthen TYPE TIME
HH:MM
When you have stored a document in the
memory for sending later:
If using the 12 hour clock, press the Function
button to switch between a for AMand p for PM.
Display shows AUTOMATIC RX
MEMORY TX
Press the < > buttons to move the cursor.
Display shows TX FROM MEMORY
Display shows ALREADY ENTERED
Display shows PRINT SETTING?
Enter the time at which you want your fax
/
to be sent, e.g. 18.30 or press the Start
Press to switch between this and the other
button to select the current time.
two options CHANGE PARAM?or CANCEL
SETTING?
Display shows TYPE FAX NUMBER
Use the keypad to dial the number you
/
Press to select the option displayed.
want.
PRINT – you get a print out of the fax
details and then the machine returns to
standby.
20
PaperJet 50e User Guide_se 10-06-2003 10:08 Pagina 21
CANCEL – the machine cancels the
memory setting and returns to standby.
Receiving faxes
CHANGE PARAM? – you can change the
fax number and time settings. Display
shows TYPE TIME.
By pressing the RX MODE button you can
set your PaperJet 50E to receive a
document in three different ways:
/
/
Change the time if required.
Press to display the following settings.
Display shows TYPE NUMBERand the
number already entered.
AUTOMATIC RX– This is Automatic reception.
Your fax machine automatically answers fax
calls (this is the default setting).
You can change the number if required.
Repeat the 2 steps above for all the numbers
that have been entered.
MANUAL RX– This is Manual reception.
You answer calls in person and receive faxes
by pressing the Start button if you hear the
fax tones.
If the list contains less than 10 numbers
the display shows TYPE FAX NUMBER.
/
Enter a new number if required.
PHONE/FAX RX– This is Automatic reception
with call recognition. After the set number
of rings (default 4), your fax machine will
answer the call. If it is a fax, it is received.
If it is a voice call the machine beeps for up
to 20 seconds and the display shows LIFT
HANDSET. If you do not lift the handset the
machine prepares to receive a fax.
Repeat the last step until you have entered
all the numbers you want up to a maximum
of 10.
After entering/ changing your last number
press Start again to confirm. Display shows
AUTOMATIC RX (or current receive mode)
and MEMORY TX.
If you pick up the phone before your
machine takes the call and you hear fax
tones, press the Start button to begin
reception and hang up the handset.
21
PaperJet 50e User Guide_se 10-06-2003 10:09 Pagina 22
To store a one touch entry
Using the one-touch memories
Using the codes 0-9, your PaperJet 50E has
10 one-touch memories under which you
can store a name, fax number and telephone
number.
Using the keypad to enter names and
numbers
The keypad lets you type letters when you
are asked to enter a name.
You can store numbers up to 32 digits long,
and names up to 16 characters long, in each
one-touch memory.
For example to enter the name JOHN:
Press the 5 button until the display shows
Press
J
.
.
.
.
Press until the display shows FAX SET-UP
>
Display shows DATE AND TIME
Press the 6 button until the display shows
Press
O
H
N
Press until the display shows ONE TOUCH
DIAL
>
Press the 4 button until the display shows
Press
Display shows TYPE ONE TOUCH
>
Enter a single digit 0-9 to set the one touch
/
Press the 6 button until the display shows
Press
memory location under which the name
and number will be stored, e.g. 1 Display
shows FAX NO.
>
Press the and buttons to enter
✱
#
Press to switch between FAXor TELNO.
different symbols such as ‘&’.
Press to select the fax or phone number
setting you want.
Press the < > buttons to move the cursor to
the character you want.
Display shows FAXor TELNO.
To delete the number or name you have
entered completely, press the Clear button.
Enter the number you want to store.
If necessary, press the <> buttons
/
to move the cursor.
Press to confirm. Display shows 01: NAME
A-Z
Enter the name you want to store.
Press buttons to move the cursor.
Press to confirm. Display shows EDIT
ANOTHER YES
22
PaperJet 50e User Guide_se 10-06-2003 10:09 Pagina 23
If you stored a fax number you can now add
a phone number to the memory or vice
versa. You can also create a new memory
entry.
To send a one-touch fax
Place document face down in the document
feeder.
Press to return to standby
Or
If necessary set the Contrast and Resolution
settings.
Press to enter another name or number.
Press and hold the 0-9 memory location
number for one second. The name is
Repeat the procedure above to enter names
and numbers.
/
displayed and then the number is displayed
and dialled.
Press to confirm your last entry.
Press to return to standby. Your entries
have been stored.
Using the speed-dial memories
To edit or delete a one-touch entry
To store a speed dial entry
Follow the steps shown above to store a
one touch entry selecting the location you
want to change or delete. A new name and
number will overwrite the existing entry.
Using the codes 01 – 32, your PaperJet 50E
has 32 speed dial memories under which
you can store a name and fax number and
telephone number.
To edit an entry , press the < > buttons to
move the cursor over the digit or character
you want to change and enter the correct
one.
You can store numbers up to 32 digits long
in each speed dial memory and names up to
16 characters.
Press until the display shows FAX SET-UP
To delete a name or number, press the
Clear button when the name or number is
displayed during these steps.
Display shows DATE AND TIME
Press until the display shows CODED SPEED
DIAL
Display shows TYPE SPEED NO.
01-32
Enter the two digit speed dialling code
under which the name and number will be
stored, e.g. 01. Display shows FAX NO.
23
PaperJet 50e User Guide_se 10-06-2003 10:09 Pagina 24
Press to switch between FAXor TEL. NO
To edit or delete a speed dial entry
Press to select the fax or phone number
setting you want.
Follow the steps shown above to store a
speed dial entry. A new name and number
will overwrite the existing entry.
Display shows 01: FAXor TELNO.
Enter the number you want to store.
/
If necessary, press the < > buttons to move
To edit an entry , press the <> buttons to
move the cursor over the digit or character
you want to change and enter the correct
one.
the cursor.
Press to confirm. Display shows 01: NAME
A-Z
Enter the name you want to store.
Press the < > buttons to move the cursor.
To delete a name or number, press the
Clear button when the name or number is
displayed during these steps.
Press to confirm. Display shows EDIT
ANOTHER YES
If you stored a fax number you can now add
a phone number to the memory or vice
versa. You can also create a new memory
entry.
To send a speed dial fax
To return to standby
Place document face down in the document
feeder.
Or
If necessary set the Contrast and Resolution
settings.
Press to enter another name or number.
Repeat the procedure above to enter names
and numbers.
Press the speed dial button. Display shows
FAX CALL
Press to confirm your last entry.
CODE OR < >
Press to return to standby. Your entries
have been stored.
01-32
Enter the memory location number under
which the fax number is stored. The number
is dialled.
Or
Press to scroll through fax numbers until
the one you want is displayed.
And
The number is dialled.
24
PaperJet 50e User Guide_se 10-06-2003 10:09 Pagina 25
Reports and lists
What the report terms mean
Reports contain the following information:
Your PaperJet 50E prints the following reports
Act. n.
Each fax sent and received is given
Power failure report
a number.
Always printed automatically.
Type
The type of operation:
– if a power failure occurs while a fax is being sent
or received the report gives you details about
that fax.
TX, TX ECM, TX POLL, TX POLL ECM
for faxes sent.
RX, RX ECM, RX POLL, RX POLL ECM
for faxes received.
– if a power failure occurs before sending when a
document has been stored in the memory, or after
a fax has been received into memory and not
printed out, the report details the number of pages
lost from the memory and the date and time of
power failure.
Doc. N.
Reference number of document
stored in the memory for sending.
Dialled Number Fax number dialled.
Received Id
Number (and name if available) of the
Activity report
person called providing it has been
stored on their fax machine.
Provides details of the last 25 faxes sent and
received. The report is printed automatically and
you can request an activity report at any time.
Date/Time
Duration
Pages
Date and time fax was sent or received.
Length of call in minutes and seconds.
Total number of pages sent or received.
Transmission report
Provides confirmation of the results of the last fax
sent. You can set your PaperJet 50E to print a last
transmission report after every fax, every failed fax,
or upon request. The default is every failed fax.
Result
OK if fax was sent or received
successfully.
XX ERROR CODE if the fax did not go
through properly. See page 41 for the
meaning of the error codes.
Broadcasting report
Contains details about the last broadcast fax sent
(see page 26). It is printed automatically after each
broadcast fax. You can switch this setting off. The
default is ON.
Delayed transmission report
This is a report that is printed automatically when
you set a delayed transmission. It gives the number
dialled and the time of the transmission. The default
is OFF.
25
PaperJet 50e User Guide_se 10-06-2003 10:09 Pagina 26
To switch automatic printing of
transmission and error reports on and off
To switch automatic printing of delayed
transmission on and off.
Press until the display shows FAX SET-UP
Display shows DATE AND TIME
Press until the display shows FAX SET-UP
Display shows DATE AND TIME
Display shows VARIOUS SETTINGS
Display shows VARIOUS SETTINGS
Press until the display shows FAILED TX
REPORT
Press until the display shows
DELAY LIST: OFF
Press to display the option you want
Press to switch between the ONand OFF
FAILED TX REPORT– print a report only
settings.
after a fax has failed to be sent or received.
Press to confirm the option displayed.
Press to return your machine to standby
TX REPORT ALWAYS– print a report after
every received or sent fax.
TX REPORT OFF– no reports will be printed.
Press to confirm.
To request immediate print-outs
Press to return your machine to standby.
You can get print-outs of transmission,
activity and broadcasting reports.
To switch automatic printing of
broadcast reports on and off
Press until the display shows PRINT OUT
REPORT
Display shows LAST TX REPORT
Press to select the report you want to print:
LAST TX REPORT
Press until the display shows FAX SET-UP
Display shows DATE AND TIME.
Display shows VARIOUS SETTINGS.
LAST BROAD. REP
Press until the display shows BROADC.
REP: ON
ACTIVITY REPORT
PRINT: ID LIST
Press to switch between the ONand OFF
settings.
PRINT OUT: EXIT– to cancel without
printing.
Press to confirm the option displayed.
Press to return your machine to standby.
Press to confirm the option displayed.
26
PaperJet 50e User Guide_se 10-06-2003 10:10 Pagina 27
Your PaperJet 50E prints the following lists
To print the configuration, speed dial
and one-touch lists
You can obtain at any time a print-out of:
– setup and configuration of your machine
– speed dialling entries
– one-touch entries.
Press until the display shows FAX SET-UP
Display shows DATE AND TIME
To print the set-up list
Press until the display shows PRINT OUT
SET UP
Display shows PRINT SETTINGS
Press until the display shows INSTALLATION
Display shows TEL. LINE SET-UP
Press until the display shows PRINT INSTALL.
Display shows PRINT OUT:
Press to display the option you want ONE
TOUCH, SPEED DIALor SETTINGS.
Press to start the printout.
Or
Press to start the print out.
To return to standby without printing.
Or
To return to standby without printing.
Making and receiving phone calls
You can use your PaperJet 50E as a normal telephone.
To make a phone call.
Lift the receiver.
/
Dial the phone number.
27
PaperJet 50e User Guide_se 10-06-2003 10:10 Pagina 28
To dial a one-touch phone number
To search through the speed dial entries
Do not put a document in the document
feeder.
Do not put a document in the document
feeder.
You can dial without lifting up the handset.
You can dial without lifting the handset
Press and hold the memory location
number you want until the telephone number
(if stored) is displayed. The number is
automatically dialled.
Press the Speed dial button. Display shows
TEL CALL
/
CODE OR < >
Press to scroll through the entries until the
one you want is displayed.
When you hear your call being answered,
lift the handset and talk.
The number is dialled.
When you hear your call being answered,
lift the handset and talk.
To make a speed dial call
To put a caller on hold
Do not put a document in the document
feeder.
You can put a caller on hold while you talk
to someone else close by.
You can dial without lifting the handset.
Press to put your caller on hold.
Press the Speed dial button.
Your caller will hear a beep, and will not be
able to hear you.
01-32
Enter speed dial code you want. The
telephone number (if stored) is displayed
and dialled.
Press again to resume your conversation.
When you hear your call being answered,
lift the handset and talk.
28
PaperJet 50e User Guide_se 10-06-2003 10:10 Pagina 29
To stop copying
Copying documents
Your PaperJet 50E can act as a convenience copier
and make multiple copies of a document as well as
enlarging or reducing your original.
Press the Stop button. Display shows copy
interrupted.
Remove any remaining sheets of paper in
the document feeder.
Do not use
• Torn, crumpled and rolled paper
• Paper that is too thin
Press the Stop button again to confirm.
• Wet or moist paper
• Carbon paper
• Correction fluid, paper clips or staples.
To copy a document
Insert the document to be copied into the
document feeder.
Press the Copy button. Display shows the
current contrast, resolution and size
settings.
100% TEXT
NORMAL
Select the contrast LIGHT, DARK, NORMAL.
Select the resolution TEXT, PHOTO
Select the size 100%, 140% 70%.
Enter the number of copies required.
/
Your machine scans the document one
page at a time, printing the copies after
each page.
29
PaperJet 50e User Guide_se 10-06-2003 10:10 Pagina 30
Additional features
To set the print quality
To set the print area of a document
You can adjust the output quality of the
printer. There are 2 settings: NORMAL and
HIGH QUALITY. The default setting is
HIGH QUALITY.
You can set the print area of a received fax
to 70% 76%, 80%, 94% or 100% of the original.
The recommended reduction settings are:
A4 = 94%, Letter = 80%, Legal = Off
(no reduction).
Press until the display shows FAX SET-UP
The default setting is 94%.
Display shows DATE AND TIME
Press until the display shows FAX SET-UP
Display shows DATE AND TIME
Press until the display shows PRINTER
PARAMET.
Press until the display shows
COPY: HIGH QUAL.
Press until the display shows PRINTER
PARAMET.
Press to switch between HIGH QUAL.
and NORMAL
Press until the display shows REDUCTION 94%
Press to switch between 94%, 80%, 76%, 70%
and OFF (100%, no reduction).
Press to confirm the option displayed.
To return your machine to standby.
Press to confirm the option displayed.
To return to standby.
30
PaperJet 50e User Guide_se 10-06-2003 10:10 Pagina 31
To receive a document longer than the
paper size
To set the number of rings before your
fax machine takes a call
If you receive a document sent using a
longer paper size than the one in your fax
machine, you may find the text is cut off.
If the fax machine is set to AUTOMATIC
RX or PHONE FAX RX, it is pre-set to
answer incoming calls after 4 rings.
You can make the fax print the remaining
text on another sheet.
You can change the number of times it rings
before taking the call
Press until the display shows FAX SET-UP
Display shows DATE AND TIME
Press until the display shows INSTALLATION
Display shows TEL.LINE SET-UP
Display shows PRINTER PARAMET.
Press until the display shows RINGCOUNT:04
Press until the display shows SURPLUS:AUTO
Press to set the number of rings to 01, 02,
04or 08.
Press to select ONfrom the options of AUTO,
ONand OFF
Press to confirm the option displayed.
To return to standby.
If you select AUTO, your machine will print
remaining text on another sheet providing
it fills at least 12 mm of the page. By
selecting ONyou ensure that any surplus
text is printed on another page. If you select
OFF, your machine will not print any surplus
text.
To adjust the ringer volume
You can switch between High, Medium,
Low and Off. The default setting is High.
Press to confirm.
Press until the display shows FAX SET-UP
Display shows DATE AND TIME
To return to standby.
Display shows VARIOUS SETTINGS
Press until the display shows RING VOLUME:
HIGH
Press to switch between the settings HIGH,
MEDIUM, LOWand OFF.
Press to confirm the option displayed.
To return to standby.
31
PaperJet 50e User Guide_se 10-06-2003 10:10 Pagina 32
To adjust the duration of the phone call
alert beeps
To switch remote start off/on
Press until the display shows INSTALLATION
When your PaperJet 50E is set to
PHONE/FAX RXmode it automatically
answers all calls. If it is a phone call, it is set
to beep for 20 seconds to alert you to pick
up the handset. You can adjust the duration
of these beeps.
Press until the display shows REMOTE
START: ON
Press to change from ON to OFF.
Press to confirm the setting. The display
shows RING COUNT XX.
Press until the display shows INSTALLATION
Press to return to standby.
Display shows TEL.LINE SET-UP
Press until the display shows FAX/TEL
TIMER:20
Press to switch between the options of 15,
20, 30and 40seconds.
Press to confirm the option displayed.
To return to standby.
Receiving a fax call via an extension phone
(Remote Start)
If you answer a call on an extension phone connected
to the same line as your PaperJet 50E and you hear
fax tones, you can switch your PaperJet 50E into fax
receive mode by dialling
the Start button.
. This is like pressing
✱ ✱
When you hear your PaperJet 50E respond with its
own fax tones, hang up the extension phone.
32
PaperJet 50e User Guide_se 10-06-2003 10:11 Pagina 33
To switch the fax tones on and off
To adjust the volume of the buzzer
Your machine will automatically play
dialling tones and fax connection tones over
the loudspeaker so that you can hear the
progress of the call. You can switch the
tones on and off.
Press until the display shows FAX SET-UP
Display shows DATE AND TIME
Display shows VARIOUS SETTINGS
Press until the display shows BUZZER VOL.LOW
Press until the display shows
INSTALLATION
Press to switch between HIGH, MEDIUM, LOW
and OFF.
Display shows TEL.LINE SET-UP
Press to confirm the option displayed.
To return to standby.
Until the display shows DIAGNOSTICS
Press until the display shows LINE
MONITOR:ON
Press to switch between ONand OFF. If you
select OFF, you will not hear the dialling and
fax connection tones.
To adjust the speed a fax is sent at
Press to confirm the option displayed.
To return to standby.
Your PaperJet 50E is set to send faxes at
9600bps. If you consistently fail to send
faxes to a particular number it might help
to reduce the transmission speed to
4800bps.
To adjust the loudspeaker volume
Press until the display shows FAX SET-UP
Display shows DATE AND TIME
While the machine is in standby
Display shows TYPE NUMBER.
Press to raise or lower the volume.
Display shows VARIOUS SETTINGS
Press until the display shows TXSPEED 9.6
Press to switch between 9.6and 4.8.
Press to confirm the option displayed.
To return to standby.
33
PaperJet 50e User Guide_se 10-06-2003 10:11 Pagina 34
To switch ECM mode on/off
Polling
Polling lets you call another fax machine to retrieve
a document automatically.
ECM (Error Correction Mode) is a system
for correcting errors caused by
It also enables another fax machine to call your
PaperJet 50E and request a document that you have
set ready to be received.
interference on the line. When switched on,
the display shows Ewhen sending or
receiving to/ from another machine using
ECM. The default setting for your machine
is to have ECM switched ON and you
should not have to change it. However, you
can switch it off if you wish.
This is often also known as ‘faxback’.
To poll a document from another fax
machine
Press until the display shows FAX SET-UP
Display shows DATE AND TIME
When you know that another fax machine
has a document ready for polling, you can
set your PaperJet 50E to receive the
document.
Display shows VARIOUS SETTINGS
Press until the display shows ECM:ON
Press to switch between ON and OFF.
Press to confirm the option displayed.
To return to standby.
Press until the display shows POLLING RX
Press until the display shows TYPE TIME
Either
Enter the time you want to start calling the
other fax machine then press Start.
/
/
Or
Press the Start button to begin polling
immediately. Display shows TYPE FAX
NUMBER
Dial the number of the fax machine from
which you want to poll a document.
Press to confirm. Display shows POLL RX
and the time at which you have set it to poll.
You can still send and receive other faxes as
normal.
34
PaperJet 50e User Guide_se 10-06-2003 10:11 Pagina 35
To cancel polling
To set a document for polling by another
fax machine
When you have set a polling time
Press until the display shows POLLING RX
Display shows ALREADY ENTERED
Display shows CHANGE PARAM?
To display CANCEL SETTING?
Insert a document in the document feeder.
Display shows DOCUMENT READY
Set the resolution and contrast if necessary.
Press until the display shows POLLING TX
Press twice. Display shows AUTOMATIC RX
POLLING TX SET
To confirm cancellation. Your fax machine
returns to standby.
To cancel polling remove the document
from the feeder. To cancel during polling
press Stop.
To change a polling time and number
When you have set a polling time
Press until the display shows POLLING RX
Display shows ALREADY ENTERED
Display shows CHANGE PARAM?
Display shows TYPE TIME
HH:MM
If required, use the keypad to enter the new
/
time. This overwrites the original one.
Display shows TYPE NUMBER
If required, enter the new number. This
overwrites the original one.
/
Display shows AUTOMATIC RX
POLL RX
To confirm. Your machine returns to
standby.
35
PaperJet 50e User Guide_se 10-06-2003 10:11 Pagina 36
Caller Display
If you have suscribed to your network provider’s
caller display service your PaperJet 50E will display
caller information. Wen you receive and incoming
call the display will show:
You caller’s number.
Or
WITHHELD - if your caller has chosen to withhold
their number.
Or
NO AVAILABLE - if your caller is connected to an
excange whith does not provide this service.
Or
OPERATOR - if you are being called by the operator.
Or
INTERNATIONAL - if you are being called from
overseas.
Or
RING-BACK - if you have previously called an
engaged number and set up a Ring back call.
Or
PAYPHONE - if you are being called by a payphone.
36
PaperJet 50e User Guide_se 10-06-2003 10:11 Pagina 37
Connecting to a switchboard
You can store the access code required to get an
outside line so that you only have to press the
EXTERNAL button.
Press the
buttons to display the options:
< >
FLASHor PREFIX. If your access code is
recall choose FLASH. If your access code is a
digit(s) choose PREFIX.
With some switchboards you may also need to switch
your PaperJet 50E from TONE dialling to PULSE
dialling. Check with your switchboard manager or
supplier to see if this is necessary.
Press Start to confirm your choice.
If you select PREFIXyou are asked for the
code needed to get an outside line via your
switchboard (max. three digits).
Enter your code.
/
To set the dialling mode and access
number
To confirm.
Display shows PSTN DIAL: TONE
Press to switch between TONEand PULSE
settings to suit your switchboard.
While your PaperJet 50E is in standby mode
Press the Function button until the display
shows INSTALLATION
To confirm.
To return to standby.
Display shows TEL.LINE SET-UP
Display shows PUBL. LINE (PSTN)
Press until the display shows PRIV. LINE
(PBX)
Display shows PBX DIAL: TONE
Press to switch between TONEand PULSE.
Press to confirm. Display shows
EXT. LINE: PREFIX
37
PaperJet 50e User Guide_se 10-06-2003 10:12 Pagina 38
Using the External button
You can use the External button to insert
the access code before numbers stored
in the one touch and speed dial memories.
Before entering the number (pages 22-24),
press External, an Ewill appear in the
display, and continue entering the number
as normal.
When dialling manually, just press External
before dialling the number.
To switch dialling mode during a call
If you are using your PaperJet 50E in PULSE
dialling mode, you can change to TONE
mode during a call using the button. This
✱
might be useful when calling interactive
services such as the BT Customer Services
line on 150.
After pressing the button all subsequent
✱
digits will be dialled in TONE mode. When
you end the call, dialling will revert to
PULSE mode.
38
PaperJet 50e User Guide_se 10-06-2003 10:12 Pagina 39
Help
The error light comes on and an error message
is displayed.
If there is a power failure
In the case of power failure, the fax machine will
keep the data for:
An error report is automatically printed. Press the
Stop button to reset the machine and check the
message against the Error Messages list, page 42.
•
numbers stored in the one-touch and speed
dial memories
reports
•
Any documents stored in the memory will be lost,
along with date, and time.
If you run out of paper or ink.
When the power is restored your machine will print
out a report which shows the total number
of pages (both received and stored for sending) lost
from the memory.
Your PaperJet 50E will store incoming faxes in the
memory.
If you run out of paper or ink or the paper jams
during reception, or if you open the printer cover,
printing will stop and the fax you are receiving
will be temporarily stored in the memory. Once the
problem has been resolved, your machine will start
printing again.
Your machine doesn’t switch on
Check that the mains power is plugged in and
switched on.
Replacement cartridges (Code M 2191)
are available by telephone 0870 240 7285.
The document cannot be inserted into the
document feeder
Check the size of the document. See page 16 for
correct sizes.
Fax documents are not sent
Check that the document is not jammed in the
machine.
The line may be busy. Your machine will retry
automatically 3 times at 2 minute intervals.
39
PaperJet 50e User Guide_se 10-06-2003 10:12 Pagina 40
Your machine does not receive faxes
automatically
• Check that it has not been set for manual
reception.
• Check that you have ink and paper.
• Check for paper jams.
You cannot print faxes or copy documents
• Check for paper jams.
• Check that you have ink and paper.
• The type of paper you are using may not be
correct, check paper size and weight shown on
page 16.
Your machine prints out completely blank copies
You may have inserted the document to be copied
the wrong way around. Place the side to be copied
face down.
40
PaperJet 50e User Guide_se 10-06-2003 10:12 Pagina 41
Error codes
Other problems may be accompanied by a display of ERROR CODE and a number. Check the number against
the list below.
CODE
OK
MESSAGE
ERROR CAUSE
ACTION
No message. Operation completed
successfully
No action.
02
IMPOSSIBLE CONNECTION
The fax machine does not detect any
dialing tone or receives an irregular signal.
Check that the fax machine is
correctly connected to the telephone
line and that the hardset is not off
the hook. Then try connecting again.
03
04
05
RECEIVER DOES NOT ANSWER
The number you are calling does not
answer or is not a fax or there is no
dial tone.
Check for dial tone by lifting the
handset and if OK try calling again.
ERR.WHILE TRANSMITTING
RESEND FROM PAGE: nn
A problem has occurred while
sending a fax. “nn” = page number
on the which the error occurred.
Send again starting from the
page shown in the report.
RESEND PAGES:
nn, nn
The machine you are calling
detected errors during the send.
“nn” = page number on which
the error occurred.
Send again starting from the page
shown in the report.
07
08
DOCUMENT TOO LONG or
SENDING STOPPED
Transmission time for a page exceeds
the permitted limit.
Try sending again.
CHECK THE DOCUMENT
Optical scanner unable to read
the document or document may be
too long.
Remove and re-insert document in
the feeder and try again.
Check paper is not longer than
600mm.
09
10
STOP PRESSED
No message
You have stopped the machine.
No action.
Fax has detected an error while
receiving a fax.
Ask sender to send fax again.
11
No message
Printer problem while receiving a fax.
Document stored in the memory
but the memory capacity has been
exceeded.
Correct the printing problem, then
wait for the stored document to be
printed. Ask sender to fax the rest
of the document.
13
16
ERRORS WHILE POLLING
POWER FAILURE ON PAGE
No message.
Polled fax machine has no document
ready or was not set for polling.
Contact the sender.
Power failure while sending or
receiving a document.
Send again from the page shown on
the report.
(OK)
OCC
Document has been received but
printing quality is poor.
Contact sender.
LINE BUSY
The line is engaged.
Try again later.
41
PaperJet 50e User Guide_se 10-06-2003 10:12 Pagina 42
COVER OPEN
Error messages
Close the printer compartment cover.
If you see an error message on the display, check
here for its meaning and solution. Messages are listed
in alphabetical order.
DOC IN MEMORY
A received fax is stored in the memory because it
could not be printed right away. Check the problem
on the display and clear it.
AUTOREDIAL nnn
Last fax call failed. Your machine will redial after
nnn seconds.
LAST TX ERR. XX
The last fax sent was not completed successfully.
Press the Last TX button to send again or press the
Stop button to return your machine to standby.
CHECK DOCUMENT, PRESS
The document is not going through properly.
Remove and re-insert the document in the document
feeder. Press the Stop button to return to standby
and send again.
MEMORY FULL
Because of a printing problem (no paper, paper jam,
no ink, cover open etc) documents have been
received into the memory. Resolve the printing
problem and the documents will automatically be
printed and the memory cleared.
CHECK PAPER, PRESS
You have run out of paper. Add paper and press the
Stop button to return to standby.
Or
NOT PROGRAMMED
The paper is not going through properly. Remove
and re-insert the paper. Press the Stop button to
return to standby.
You have chosen a one-touch button or speed dial
code which does not have an entry stored.
OUT OF INK
CHECK PRINT HEAD
The ink in the cartridge has run out. Change the
The cartridge has not been installed or has been
installed incorrectly. Install the cartridge again.
cartridge (see Changing the cartridge, page 44).
Some print nozzles may be damaged, reducing print
PAPER ERROR, PRESS
quality. Clean the cartridge (see page 46).
Paper jam. Press the Stop button and, if the paper
sheet is not ejected automatically, check where it is
jammed and remove it. (See Removing jammed pages,
page 48.)
COPY INTERRUPTED
The Stop button has been pressed.
Or
There was a problem during copying and it could
not be printed. Check the type of problem on the
display and clear it.
42
PaperJet 50e User Guide_se 10-06-2003 10:12 Pagina 43
POLL. RETRY nnn
Beeps
The last polling call failed. Your fax is waiting to redial
the number after nnn seconds.
Error beeps
Short beep – wrong key pressed when following a set
of instructions.
REMOVE DOCUMENT, PRESS
A document jam has occurred. Press the Stop button
and if the page is not ejected automatically, remove
it by hand. (See Removing jammed pages, page 48.)
Long beep – unsuccessful procedure.
Continuous beep – handset is off-hook.
Or
Advice beeps
Document scanning has been interrupted by pressing
the Stop button.
Short beep – confirms fax sent or received successfully.
Beeps for 20 seconds – phone call, lift receiver to answer.
RX ERROR
An error has occurred during fax reception. Press
the Stop button to turn off the Error light and clear
the message. You may need to ask the sender to
re-send the fax.
Memory capacity
Your PaperJet 50E can store up to 21 pages of this
standard letter (reproduced A4 size).
RX IN MEMORY
A problem has occurred during reception and the
fax has continued to be received in the memory.
The bottom line of the display tells you what the
problem is. Resolve the problem and the fax will
automatically be printed.
SYSTEM ERROR nn
Your machine has locked up. Note the error code.
PaperJet Helpline is 0870 240 8026.
TX ERROR
Your last fax was not sent correctly. Press the Stop
button to turn off the Error light and clear the
message. Check the number you are sending to and
try sending your fax again.
BT PaperJet Helpline
If you cannot resolve a problem by using the Help
section, contact the Helpline on 0870 240 8026.
43
PaperJet 50e User Guide_se 10-06-2003 10:12 Pagina 44
Maintenance
Cleaning your PaperJet 50E
2 Pull the green tab towards the front of the
machine to release the cartridge.
3 Lift out the cartridge.
First disconnect it from the mains power supply and
the telephone line.
Clean with a cloth dampened with diluted
washing-up liquid. Never use household polish as
this may damage your fax machine. Never use a dry
cloth as this may cause static shock.
4 Remove the new cartridge from its
Changing the cartridge
packaging. Holding it by the finger grip, peel the
protective film from the print nozzles.
Your PaperJet 50E is supplied with a starter print
cartridge.
Replacement cartridges (Code M 2191) are available
by telephone 0870 240 7285.
Changing the cartridge
1 Open the printer compartment cover.
5 Avoid touching the nozzles and metal electrical
contacts.
44
PaperJet 50e User Guide_se 10-06-2003 10:12 Pagina 45
6 Insert the new cartridge into the holder with the
electrical contacts facing towards the front of the
machine.
7 Pull the cartridge towards the front of the machine
until you hear it click into position.
8 It should be oriented a shown close the cover
on next drawing.
FRONT OF MACHINE
9 Close the cover.
45
PaperJet 50e User Guide_se 10-06-2003 10:12 Pagina 46
Manually cleaning the cartridge contacts
To clean the cartridge and nozzles
Lift the printer compartment cover.
Remove the cartridge, as shown in Changing the
cartridge.
If the printing quality deteriorates you can
quickly clean the print head and test the
nozzles with a print-out showing their
condition.
Press the Function button until the display
shows HEAD MAINTENANCE
Display shows NEW HEAD: ON
Either
Use a slightly damp cloth to clean the electrical
contacts taking care not to touch the nozzles.
If the print head is new, press the Start
button. Your PaperJet 50E performs a print
test.
Or
If the print head is not new, press to display
NEW HEAD: OFF
Display shows CLEANING: ON
Your machine performs a print test.
To cancel, press the Stop button.
To interpret the print test, see page 14.
Use a slightly damp cloth to clean the electrical
contacts of the carriage inside the machine.
If the printout shows NOZZLE DAMAGED
then you should clean the cartridge
contacts, see opposite.
Replace the cartridge.
Close the cover.
46
PaperJet 50e User Guide_se 10-06-2003 10:12 Pagina 47
Cleaning the optical scanner
Dust or dirt on the optical glass may cause scanning
problems such as vertical lines on a received fax or
copied document.
If after cleaning, you still get vertical streaks on
printed documents, contact your service engineer.
NOTE
Switch your machine off at the mains.
Lift the printer compartment cover.
Move the cartridge to the left hand side of the
machine.
Lift the hinged metal plate using the lever located on
the right hand side of the machine.
Clean the optical scanner with a cloth dampened
with a product specially designed for cleaning glass.
Then carefully wipe it dry. Do not pour or spray
cleaning fluid directly onto the glass.
Lower the hinged plate and close the printer
compartment cover.
47
PaperJet 50e User Guide_se 10-06-2003 10:12 Pagina 48
Removing jammed pages
If a document or sheet of paper becomes jammed
while sending a fax or during copying the display
shows REMOVE DOCUMENT, PRESS
If paper used to print received faxes or photocopies
becomes jammed the display shows PAPER ERROR,
PRESS
First try ejecting the paper by pressing the Stop
button.
If the paper does not come out automatically:
Remove any paper still in the feeders.
Lift the printer compartment cover.
Press down the green lever on the left hand side of
the machine and remove the jammed paper.
48
PaperJet 50e User Guide_se 10-06-2003 10:12 Pagina 49
Technical information
PaperJet 50E
Model ......................................................Desktop transceiver
Display ....................................................LCD 2 x 16 characters.
Memory capacity* .....................................21 pages
Dimensions
Width ......................................................359mm
Depth......................................................234 + 84mm (with paper support extension)
Height .....................................................180mm + 138mm (with paper support extension)
Weight.....................................................4.5kg
Communication features
Telephone network.....................................Public/private
Compatibility ............................................ITU
Communication speed ................................9600-4800bps
Compression method .................................MH, MR, MMR
Power features
Power supply.............................................220-240 VAC, 50-60Hz
Power consumption....................................7W standby, 35vv max
Optical scanner features
Scanning method.......................................CIS
Reading resolution .....................................
horizontal ............................8 pixel/mm
vertical STANDARD...............3.85 lines/mm
vertical FINE ........................7.7 lines/mm
Transmission features
Transmission time......................................15s (9600bps)
Automatic document feeder ........................5 sheets A4, Letter and Legal
49
PaperJet 50e User Guide_se 10-06-2003 10:12 Pagina 50
Reception features
Printing method . . . . . . . . . . . . . . . . . . . . . . Printing on plain paper with ink jet printer
Max. printing width . . . . . . . . . . . . . . . . . . . . 208mm
Printing paper . . . . . . . . . . . . . . . . . . . . . . . . A4 (210 x 297mm), Letter and Legal
US Letter (216 x 279mm) and US Legal (216 x 356mm)
Weight 70-90gsm
Paper feed. . . . . . . . . . . . . . . . . . . . . . . . . . . Plain paper cassette 40 sheets, (80gsm)
Environmental conditions . . . . . . . . . . . . . . . from 5°C to +35°C (operating)
from –15°C to +45°C (transport)
from 0°C to +45°C (storage and parking)
Relative humidity. . . . . . . . . . . . . . . . . . . . . . 15%-85% (operating, storage, parking)
5%-95% (transport)
*ITU TS format, Test Sheet No.1 (Slerexe Letter) in standard resolution with MH compression.
R&TTE
This product is intended to be connected to analogue
networks and private switching systems in the United Kingdom.
This product complies with the essential requirements of the
Radio and Telecommunications Terminal
Equipment Directive 1999/ 05/ CE.
A copy of the certificate can be obtained from the helpline 0870 240 8026.
50
PaperJet 50e User Guide_se 10-06-2003 10:12 Pagina 51
Index
Activity report
Alert beeps
25
32
Fax
automatic dialling
dialling
dial using handset
header
pre-set time
receiving
redial
18
17
18
15
19
21
18
17
Beeps
Broadcast a document
43
20
Caller display
Calls
36
send
dial one-touch number
make
on hold
28
27
28
28
44
Handset
connect
10
39
speed dial
Help
Cartridge – change
Helpline
43
Cleaning
Contrast
44, 46
16
Ink cartridge – change
44–45
Copying documents
copy a document
stop copying
Lists
29
29
configuration
one-touch
set-up
27
27
27
27
Date
12
speed dial
Enter
Maintenance
Make a call
44–48
27
fax number
14
14
name
Memory
capacity
Error codes
41
42
34
43
31
Error messages
ECM mode on/off
Number of rings
51
PaperJet 50E user guide – Edition 3 – 29.8.00
PaperJet 50e User Guide_se 1-07-2003 18:21 Pagina 52
Reports
activity
One-touch memories
25
25
25
25
25
26
delete
23
23
23
22
delayed transmission
broadcasting
transmission
power failure
request print-outs
edit
send
store
Paper
check size
load
16
11
10
16
Resolution
16–17
31
Ringer volume
support
type
Safety information
Setting up
9
Polling
10
cancel
35
35
34
35
Send
fax
change time and number
from another fax
set by another fax machine
17
19
fax at pre-set time
Set
Power
11
25
date
12
12
28
Power failure report
time
Pre-set fax
change details
send
Speed dial call
19
19
Speed dial memories
delete
edit
send
store
24
24
24
23
Print area
30
13
Print cartridge
Print cartridge – change
Print quality
44
14, 30
Store
document in memory
one-touch entry
speed dial entry
19
22
23
Receiving
document longer than paper size
31
21
faxes
Switchboard
Redial
external button
set access number
set dial mode
38
37
37
38
automatic re-dialling
last number
18
18
switch dialling mode
52
PaperJet 50E user guide – Edition 3 – 29.8.00
PaperJet 50e User Guide_se 1-07-2003 18:23 Pagina 53
Technical information
Telephone line cord
Time
49
10
12
33
Tones on/off
Volume
buzzer
33
33
31
loudspeaker
ringer
Code 293319E-02
53
PaperJet 50e User Guide_se 10-06-2003 10:12 Pagina 54
Offices worldwide
The telecommunications services described in this publication
are subject to availability and may be modified from time to time.
Services and equipment are provided subject to British
Telecommunications plc’s respective standard conditions of contract.
Nothing in this publication forms any part of any contract.
© British Telecommunications plc 2000.
Registered Office: 81 Newgate Street, London EC1A 7AJ.
Registered in England No. 1800000.
Designed by Olivetti.
Printed in Thailand.
PaperJet 50E user guide (4/ 03) 1
Printed on paper which meets international environmental standards.
|