REPLACING FILTER ASSEMBLY- AirTube Jr.
Operation and Maintenance Manual for
Air Tube Series
Step 2
Gently lay unit up-side down. With
a screw driver, remove all 4 screws.
Step 4
Step 1
Turn Power Off and
unplug receptacle.
Remove Carbon filter by placing
hands on the inner side of the filter.
Step 3
Remove lid by pulling slightly on
cover.
Then pull up gently until totally out.
Step 7
Place lid back to its proper position
by aligning screw holes.
Step 5
Step 6
To replace the electrostatic HEPA
filter, gently remove the filter from
carbon canister and replace with a
new one.
Step 8
With a screw driver, place 4
screws back into their positions.
Replace all filters with new ones
then reassemble by inserting the
Carbon filter.
REPLACEMENT PARTS
MODELS
Air Tube Jr.
Air Tube
Air Tube Supreme
Carbon (Exec Models)
9" A2FCW301
9" A3FCW302
9" A3FCW303
A3FH0410 HEPA
A3FMP009
12" A3FCB401
12" A3FCB403
A3FH0420 HEPA
A3FMP012
AirTube
Carbon (Vocarb Models) 9" A2FCW302
Micro-HEPA Wrap
PRE-FILTER
Motor
A2FMR002 9 x 21
---------------------
A2EL0040
AirTube Supreme
AirTube Jr.
A2EL0040
A2EL0040
Switch
CMEL0046
CMEL0046
A3EL0046
CMEL0046
A3EL0046
Cord
A3EL0046
Handle
A4HD8414
A4HD8414
A4HD8414
AllerAir Industries Inc.
|