USER’S GUIDE
V:1407-0603-09
IS809B
Wireless Speaker System
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC Warnings
What’s Included
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or
television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
• IS809B
• Wireless Remote Control
• Docking Brackets for iPod
• Documentation
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Features
• Dock plays and charges iPod
• Wireless speakers
• Supports up to 20 speakers
• Advanced hi-fi sound with Channel Purity®
• Wireless remote
Additional Warnings
• Digital volume control
• Pairing button
• Left, right, or mono selections
• Weather resistant
• Digital 2.4GHz ISM wireless transmitter
• LCD display with white backlight
• Digital clock
This device complies with RSS 210 of Industry Canada.
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2)
this device must accept any interference, including
interference that may cause undesired operation of this
device.
• Play/pause, skip up/down functions for iPod
• On/Off, mute, function and pairing controls
• Independent volume settings for each speaker
• Transmission range: up to 200ft (line of sight) and
90ft indoors
• Auxiliary input for iPod shuffle and other audio
devices
• AC power: built-in AC cord
• DC power: requires 6 D batteries per speaker, not
included
L’utilisation de ce dispositif est autorisée seulement
aux conditions suivantes: (1) il ne doit pas produire de
brouillage et (2) l’utilsateur du dispositif doit éntre prét a
accepter tout brouillage radioélectrique recu, meme si ce
brouillage est susceptible
de compromettre le fonctionnement du dispositif.
The term “IC” before the equipment certificationnumber
only signifies that the Industry Canada technical
specifications were met.
This equipment complies with Industry Canada Radio
Frequency Electromagnetic Signal (RF) exposure limits
set forth for an uncontrolled environment of portable
transmission.
CUSTOMER HELPLINE | 1-314-621-2881
iLive | IS809B
3
Download from Www.Somanuals.com. All Manuals Search And Download.
POWERING THE BASE STATION AND REMOTE
Base Station AC Power
Base Station Battery Backup
Power the base station by connected it to a
standard AC outlet using the attached AC power
cord.
Requires 2 AAA batteries (not included).
The battery backup is meant for keeping the clock
and timer settings during short unexpected power
outages. The unit’s other features cannot function
off of the battery backup alone.
Remote
Requires 2 AAA batteries (not included).
Power the remote by inserting 2 AAA batteries into
the battery compartment on the back of the remote.
4
iLive | IS809B
Download from Www.Somanuals.com. All Manuals Search And Download.
POWERING THE WIRELESS SPEAKERS
Wireless Speaker AC Power
Power the wireless speakers by connected them to
a standard AC outlet using the attached AC power
cord.
The AC cord is stored inside of the wireless
speaker’s battery compartment.
After extending the AC cord out from the battery
compartment, snap the battery compartment door
back into position to keep the internal elements of
the wireless speaker from being exposed.
Wireless Speaker DC Battery Power
Requires 6 D batteries (not included).
CUSTOMER HELPLINE | 1-314-621-2881
iLive | IS809B
5
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Timer
Press and hold to set
the timer.
Dock for iPod
Dimmer
Use to connect an iPod
to the wireless speaker
system.
Press to adjust the
brightness on the
wireless speaker
system’s display
Source
Press to switch between
iPod and Auxiliary
modes.
Power
Press to turn the unit
off and on.
Link Indicator
Indicates the current
status of the base
station’s wireless
link with the wireless
speakers.
Play/Pause
Press to play or pause a
docked iPod.
Skip/Search
Press to skip forwards
or backwards through
tracks on a docked
iPod.
Press and hold to
search forwards or
backwards through an
individual track on a
docked iPod.
Display
Sleep
Press repeatedly to set
the sleep timer.
Time Set
Press and hold to set
the wireless speaker
system’s clock.
Auxiliary Input
Use to connect an
external audio source
to the wireless speaker
system.
Pair
Press and hold to
pair the base station
with nearby wireless
speakers.
6
iLive | IS809B
Download from Www.Somanuals.com. All Manuals Search And Download.
Power
Press to turn the unit
off and on.
Mute
Press to mute the
volume of the unit.
Source
Press to switch between
iPod and Auxiliary
modes.
Play/Pause
Press to play or pause a
docked iPod.
Repeat
Press to activate the
repeat options on a
docked iPod.
Random
Press to activate the
shuffle option on a
docked iPod.
Skip/Search
Press to skip forwards
or backwards through
tracks on a docked
iPod.
Bass
Press and hold to
search forwards or
backwards through an
individual track on a
docked iPod.
Press to adjust the level
of bass output from the
linked speakers.
Treble
Volume
Press to adjust the
volume of the unit.
Press to adjust the level
of treble output from
the linked speakers.
Special Note
The included remote is wireless and does
not require line-of-sight to control the
unit.
Battery Compartment
Located on the back of
the remote. Requires
2 AAA batteries, not
included.
The wireless remote can control the unit
from approximately half the distance of
the speaker reception. (Approximately
100ft line-of-sight, or 45ft indoors
depending on location)
CUSTOMER HELPLINE | 1-314-621-2881
iLive | IS809B
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Left/Right/Mono
Adjust to switch
between Left, Right,
snd Mono speaker
modes.
Speaker Volume
Turn to adjust the
volume of the wireless
speaker.
Pair
Press and hold to pair
the speaker with nearby
base stations.
Power
Press to turn the
speaker off and on.
Battery Compartment
Requires 6 D batteries,
not included.
AC Power Cord
Link Indicator
Use to connect the
wireless speaker to a
standard AC outlet.
Indicates the current
status of the wireless
speaker’s link with the
base station.
8
iLive | IS809B
Download from Www.Somanuals.com. All Manuals Search And Download.
PAIRING THE WIRELESS SPEAKERS WITH THE BASE STATION
Pairing
What does it mean to Pair?
Pairing the base station with a wireless
The two wireless speakers included in the same
speaker allows the base station to recognize
that wireless speaker. Once paired, the base
station will remember that wireless speaker and
transmit audio through it.
box as the base station are pre-paired with that
base station. Any additional speakers will need to
be paired by following the directions below.
When pairing the base station with a wireless
speaker you will need to press the Pair button
on the base station and wireless speaker
simultaneously. Because of this, you will need to
have both the base station and wireless speaker
within reach when you pair them.
Link Indicators
Off
Powered off.
1. Plug the base station into a power source,
and press the Power button to power the base
station on.
Slow Flashes
Standby mode.
Quick Flashes
Attempting to pair.
The base station Link Indicator will flash when
the base station is powered on.
Solid Light
Paired and playing.
2. Plug the wireless speaker into a power source
or insert 6 D batteries, not included, and press
the Power button to power the wireless speaker
on.
If the base station is not playing audio, either from
the dock for iPod or the Auxiliary input, then both
the base station and wireless speakers will go into
Standby mode. Once you begin playing audio from
the base station, both the base station and wireless
speaker will come out of Standby mode.
The wireless speaker Link Indicator will flash
when the wireless speaker is powered on.
3. Adjust the Volume on the wireless speaker to
approximately the half-way point between min.
and max volume.
Transmission Range
4. Simultaneously press and hold the Pair button
on the base station and the Pair button on the
wireless speaker for 5 seconds.
Once the base station is paired with a wireless
speaker, the wireless speaker can be moved
approximately 200ft (line-of-sight) or 90ft
(indoors) and still receive audio from the base
station.
5. The wireless speaker will emit a long beep
when it is paired with the base station.
If the wireless speaker emits short repeating
beeps, it was not able to pair with the base
station. Repeat steps 1-4 until you hear the
long beep.
Results will vary depending on the number and
size of obstructions between the base station and
the wireless speaker.
After pairing, the wireless speaker may take up to
30 seconds to begin playing audio from the paired
base station.
How many speakers can I pair to
one base station?
Up to 20 wireless speakers can be paired with
one base station. Additional speakers are sold
separately.
Repeat steps 1-4 for each additional wireless
speaker you want to pair with the base station.
CUSTOMER HELPLINE | 1-314-621-2881
iLive | IS809B
9
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS
Setting the Clock
Setting the Timer
1. Press and hold the Time Set button.
1. Press and hold the Timer button.
2. While holding the Time Set button, press the
Skip/Search buttons to adjust the hour and
minute.
2. While holding the Timer button, press the
Skip/Search buttons to adjust the hour and
minute.
3. Release the Time Set button to set the adjusted
3. Release the Timer button to set the adjusted
time.
timer.
4. Press the Source button to select iPod or
Auxiliary mode.
Setting the Sleep Timer
An iPod must be docked, or an audio source
must be connected to the Auxiliary input when
the set time is reached. Otherwise, no audio
will play when the set time is reached.
1. Press the Sleep button repeatedly to adjust the
sleep timer between 60 and 10 minutes, in 10
minute increments.
When the set amount of time has expired, the
unit will power off.
5. Press the Power button to turn the unit off.
6. Press the Timer button to activate the set timer.
“Timer On” will appear on the LCD display
when the timer is activated.
Using the Auxiliary Input
Note: The speakers need to be paired with the unit
before any audio can be heard.
After the set time is reached, the base station
will power on.
1. Connect a mini-phono 3.5mm cable (not
included) or a mini-phono 3.5mm cable-RCA
R/L audio cable (not included) to the Auxiliary
Input on the unit and the audio output/
headphone jack on an MP3 player, television,
or stereo system.
IMPORTANT: The wireless speakers must be
powered on manually before the set time is
reached. The timer will not power on the paired
wireless speakers.
Using the Wireless Remote
2. Turn the unit on by pressing the Power button.
The included remote is wireless and does not
require line-of-sight to control the unit.
3. Press the Source button to switch the unit to
Auxiliary mode.
The wireless remote can control the base station
from approximately half the distance of the
speaker reception. (Approximately 100ft line-of-
sight, or 45ft indoors)
4. Audio played through the connected MP3
player, television, or stereo system will now be
heard through the unit.
Audio Source
Required Connector
Results will vary depending on the number and
size of obstructions between the base station
and the wireless remote.
MP3 Player
mini-phono 3.5mm Cable (not
included)
The Volume buttons on the remote control will
adjust the master volume of the base station,
affecting all linked speakers.
Television
mini-phono 3.5mm Cable -
RCA R/L Audio Cable (not
included)
The included speakers have independent
volume controls that can be used to fine tune
the volume of the individual speakers.
Stereo System
mini-phono 3.5mm Cable -
RCA R/L Audio Cable (not
included)
10 iLive | IS809B
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS
Docking an iPod
Left / Right / Mono Speaker Settings
1. Locate the numbered bracket that fits the iPod
The wireless speakers can be set to Left, Right, or
Mono by using the Left/Right/Mono dial on the
wireless speaker.
that will be docked.
Each included Bracket has a number on it,
indicating which iPod model that bracket is
compatible with. See the separate bracket
chart page to identify which bracket is needed.
When placing multiple wireless speakers in close
proximity to one another, set half of the speakers
to Left and the other half to Right. This will create
a stereo audio output.
2. Snap the bracket into place over the iPod
connector in the Dock for iPod.
When a single wireless speaker is set in a location,
adjust the Left/Right/Mono dial to Mono.
3. Connect the iPod to the iPod connector.
When the unit is plugged in, using AC power,
the docked iPod will charge.
Resetting the Unit
Resetting the base station is the quickest and most
effective way to solve small unexpected problems
with the base station’s behavior.
1. Using a paperclip or like object, press the
Reset button to reset the base station to it’s
original settings.
Please note, resetting the base station will not
unpair any of the wireless speakers from the
bast station.
Playing a Docked iPod
Note: The wireless speakers need to be paired with
the unit before any audio can be heard. See page 9
for wireless speaker pairing instructions.
1. Press the Power button to turn the base station
on.
2. Press the Source button to switch to iPod
mode.
3. Press the Play/Pause button to play or pause
the docked iPod.
CUSTOMER HELPLINE | 1-314-621-2881
iLive | IS809B 11
Download from Www.Somanuals.com. All Manuals Search And Download.
COMPANY INFORMATION
International Support
To download this User’s Guide in English,
Spanish, or French, visit the support section at
Para transferir esta guía de usuario en inglés,
español, o francés, visite la sección de la ayuda en
Pour télécharger ce guide de l’utilisateur en
anglais, espagnol, ou français, visitez la section de
Contact Information
Address: 2116 Carr Street, St. Louis MO, 63106
Phone: 1-314-621-2881
Fax: 1-314-588-1805
Email: [email protected]
Parts Email: [email protected]
© 2009 Digital Products International (DPI, Inc.) | All other trademarks appearing herein are the property of their respective owners. Specifications are
subject to change without notice
Download from Www.Somanuals.com. All Manuals Search And Download.
|