IJ328-IB
Karaoke Stereo with Dock for iPod
Ta B l e o f C o n T e n T S
Warnings and Precautions.......................................................2
Important Safety Instructions..................................................3
In the Box & features.............................................................4
Powering the Unit & Changing the Remote Battery ..............5
Docking an iPod......................................................................6
Playing an iPod & Playing an iPod Karaoke Song.................7
Playing a CD & Playing a Standard CD for Karaoke.............8
Playing a CD+G Disc .............................................................9
Programming a CD or CD+G Disc.........................................9
Video output: Connecting a Television................................10
audio output: Connecting a Stereo System.........................11
audio Input: Connecting an MP3 Player..............................11
locations of Controls & Definitions............................... 12-19
Service & Parts Information .................................................20
Download from Www.Somanuals.com. All Manuals Search And Download.
IJ328-IB.indd
1
7/10/2008 2:21:40 PM
Important Safety Instructions
1. Read Instructions - all the safety and operating instruction should be read
protection against voltage surges and built-up static charges. article 810 of
before the product is operated.
the national electrical Code, anSI/nfPa 70, provides information with
regard to proper grounding of the mast and supporting structure, grounding
of the mast and supporting structure, grounding of the lead-in wire to an
antenna-discharge unit, size of grounding conductors, location of antenna-
discharge unit, connection to grounding electrodes, and requirements for
the grounding electrode.
2. Retain Instructions - The safety and operating instruction should be
retained for future reference.
3. Heed Warnings - all warning on the product and in the operating
instructions should be adhered to.
4. Follow instructions - all operating and use instructions should be
followed.
See figure:
5. Cleaning - Unplug this product from the wall outlet before cleaning. Do
not use liquid cleaners or aerosol cleaners. Clean only with a dry cloth.
6. Attachments - Do not use attachments not recommended by the product
manufacturer as they may cause hazards.
7. Water and Moisture - Do not use this product near water - for example,
near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement,
or near a swimming pool, and the like. The apparatus shall not be exposed
to dripping or splashing and that no objects filled with liquids, such as
vases, shall be placed on apparatus.
8. Accessories - Do not place this product on an unstable cart, stand tripod,
bracket, or table. The product may fall, causing serious injury to a child
or adult, and serious damage to the product. Use only with a cart, stand,
tripod, bracket, or table recommended by the manufacturer, or sold with
the product. any mounting of the product should follow the manufacturer’s
instructions, and should use a mounting accessory recommended by the
manufacturer.
16. Lightning - for added protection for this product during a lightning storm,
or when it is left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the antenna or cable system. This will
prevent damage to the product due to lightning and power-line surges.
17. Power Lines - an outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or power circuits,
or where it can fall into such power lines or circuits. When installing
an outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be fatal.
9. a product and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the appliance and cart
combination to overturn.
18. Overloading - Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or electric shock.
See figure:
19. Object and Liquid Entry - never push objects of any kind into this
product through openings as they may touch dangerous voltage points or
short-out parts that could result in a fire or electric shock. Never spill liquid
of any kind on the product.
20. Servicing - Do not attempt to service this product yourself as opening or
removing covers may expose you to dangerous voltage or other hazards.
Refer all servicing to qualified service personnel.
10. Ventilation - Slots and openings in the cabinet are provided for ventilation
and to ensure reliable operation of the product and to protect it from
overheating, and these openings must not be blocked or covered. The
openings should never be blocked by placing the product on a bed, sofa,
rug, or other similar surface. This product should not be placed in a built-in
installation such as a bookcase or rack unless proper ventilation is provided
or the manufacturer’s instruction have been adhered to.
21. Damage Requiring Service - Unplug this product from the wall outlet
and refer servicing to qualified service personnel under the following
conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
11. Power Sources - This product should be operated only from the type of
power source indicated on the marking label. If you are not sure of the type
of power supply to your home, consult your product dealer or local power
company. for products intended to operate from battery power, or other
sources, refer to the operating instruction.
d) If the product does not operate normally by following the operating
instructions. adjust only those controls that are covered by the operating
instructions as an improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the product to its normal operation.
12. Grounding or Polarization - This product may be equipped with a
polarized alternating-current line plug (a plug having one blade wider than
the other). This plug will fit into the power outlet only one way. This is a
safety feature. If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact your electrician
to replace your obsolete outlet. Do not defeat the safety purpose of the
polarizes plug.
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance - this
indicates a need for service.
22. Replacement Parts - When replacement parts are required, be sure the
service technician has used replacement parts specified by the manufacturer
or have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
Alternate Warnings - This product is equipped with a three-wire
grounding-type plug, a plug having a third (grounding) pin. This plug
will only fit into a grounding-type power outlet. This is a safety feature.
If you are unable to insert the plug into the outlet, contact your electrician
to replace your obsolete outlet. Do not defeat the safety purpose of the
grounding-type plug.
23. Safety Check - Upon completion of any service or repairs to this product,
ask the service technician to perform safety checks to determine that the
product is in proper operating condition.
24. Wall or Ceiling Mounting - The product should be mounted to a wall or
ceiling only as recommended by the manufacturer.
13. Power-Cord Protection - Power supply cords should be routed so that
they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, convenience
receptacles, and point where they exit from the product.
25. Heat - The product should be situated away from heat sources such as
radiators, heat registers, stoves, or other products (including amplifiers)
that produce heat. Battery shall not be exposed to excessive heat such as
sunshine, fire, or the like.
14. Protective Attachment Plug - The product is equipped with an attachment
plug having overload protection. This is a safety feature. See Instruction
Manual for replacement or resetting of protective device. If replacement of
the plug is required, be sure the service technician has used a replacement
plug specified by the manufacturer that has the same overload protection as
the original plug.
26. Main plug is used as disconnect device and it should remain readily
operable during intended use. In order to disconnect the apparatus from
the mains completely, the mains plug should be disconnected from the
mains socket outlet completely.
15. Outdoor Antenna Grounding - If an outside antenna is connected to the
receiver, be sure the antenna system is grounded so as to provide some
27. excessive sound pressure from earphones and headphones can cause
hearing loss.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IJ328-IB.indd
3
7/10/2008 2:21:41 PM
In the Box
features
•
•
•
•
•
•
Includes
CD+G Karaoke Player with iPod® Karaoke Function
1-Microphone
•
•
Top-load Player plays CD+G, CD Discs
Brackets for iPod
5.5" B&W Monitor displays CD+G graphics & lyrics
a/V Cable, 3-RCa to 3-RCa
Remote Control, battery included
aC/DC adaptor
Docking Station for iPod
•
•
•
•
•
Certified iPod Connector installed for iPod docking
Recharge Circuit for iPod/mini/nano/photo/video
Includes docking brackets to fit iPod Players
Controls Connected iPod Players
iPod authentication IC installed
Play Features
•
•
•
•
•
•
•
•
Programmable Tracks
Repeat 1 or all Play
Song Skip/Search on CD Discs
Master Volume Control
Mic Volume Control
echo Controls
aVC Control
2-Digit Red leD Display
Jacks
•
•
•
•
•
2 Microphone Jacks, 6.3mm
aux-In Jack, RCa type
Video out Jack, RCa type, works with iPod nano also
audio output Jacks, l&R RCa type
Speakers built in
Remote Control
•
•
Controls docked iPod & Player
Controls Disc Player
AC-Powered, AC Adaptor included
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IJ328-IB.indd
4
7/10/2008 2:21:41 PM
Powering the Unit
The unit is powered by plugging the aC adaptor into a standard 120V ~ 60Hz outlet.
aC 120V / 60Hz
Video Out
R
Out
L
Out
V- Hold Brightness Contrast
Video In
R
In
L
In
Changing the Remote Battery
The Remote Control has a button cell battery pre loaded into it.
CR2025
OPEN
PUSH
Step 1: Push the Release Button and pull out the Battery Compartment to access
the battery.
Step 2: Replace the old battery with an equivalent new battery (CR2025).
Step 3: The positive side of the battery, as indicated by a plus symbol, must be
facing up with inserted into the remote.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IJ328-IB.indd
5
7/10/2008 2:21:42 PM
Docking an iPod
Step 1: Locate the numbered bracket that fits the iPod that will be docked.
• Each included bracket has a number on it, indicating which iPod
model that bracket is compatible with. See the separate bracket chart
page toidentify which bracket is needed.
Step 2: Snap the bracket into place over the iPod connector in the docking
station.
• All brackets will only fit one way onto the dock.
• When inserting an iPod nano (first or second generation), slide the
dock connection on the unit so that it matches the opening on the iPod
nano (first or second generation).
Step 3: Connect the iPod to the iPod connector inside the docking station.
• Once an iPod is connected to the docking station, the unit will amplify
and charge the docked iPod.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
IJ328-IB.indd
6
7/10/2008 2:21:42 PM
Playing an iPod
Step 1: Dock an iPod into the docking station.
Step 2: Press the Power Button to turn the unit on.
Step 3: adjust the Source Dial to iPod.
Step 4: Press the Play/Pause Button to play or pause the docked iPod.
Playing an iPod Karaoke Song
Step 1: Dock an iPod into the docking station.
Step 2: Press the Power Button to turn the unit on.
Step 3: adjust the Source Dial to iPod.
Step 4: Plug in the included microphone to the Mic 1 Connection. adjust the
on/off Switch on the microphone to the on position.
• If feedback noise is present, move the microphone away from the unit
and/or reduce the microphone’s volume.
Step 5: adjust the Volume Dial to adjust the volume of audio output from the
speakers. adjust the Microphone Volume Dial to set the volume of a
connected microphone.
Step 6: Turn the AVC Select Dial to Music or Vocal.
• In Music Mode the iPod’s track vocals can not be cut out completely
even if the AVC Dial is set to the maximum.
• In Vocal Mode, the iPod’s karaoke track vocals can be cut out
completely, the same as playing a CD+G disc.
Step 7: Use the AVC Dial to adjust the balance between the music and vocals.
Step 8: Press the Play/Pause Button to play or pause the docked iPod.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
IJ328-IB.indd
7
7/10/2008 2:21:42 PM
Playing a CD
Step 1: Press the Power Button to turn the unit on.
Step 2: load the CD disc into the unit’s CD drive.
Step 3: adjust the Source Dial to CDG.
Step 4: Press the Play/Pause Button to play the loaded disc.
Playing a Standard CD for Karaoke
Step 1: Press the Power Button to turn the unit on.
Step 2: load the CD disc into the unit’s CD drive.
Step 3: adjust the Source Dial to CDG.
Step 4: Press the Play/Pause Button to play the loaded disc.
Step 5: Plug in the included microphone to the Mic 1 Connection. adjust the
on/off Switch on the microphone to the on position.
• If feedback noise is present, move the microphone away from the unit
and/or reduce the microphone’s volume.
Step 6: adjust the Volume Dial to adjust the volume of audio output from the
speakers. adjust the Microphone Volume Dial to set the volume of a
connected microphone.
Step 7: Turn the AVC Select Dial to Music or Vocal.
• In Music Mode the CD’s track vocals can not be cut out completely
even if the AVC Dial is set to the maximum.
• In Vocal Mode, the CD’s karaoke track vocals can be cut out
completely, the same as playing a CD+G disc.
Step 8: Use the AVC Dial to adjust the balance between the music and vocals.
Step 9: Press the Play/Pause Button to play or pause the loaded CD.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
IJ328-IB.indd
8
7/10/2008 2:21:42 PM
Playing a CD+G Disc
Step 1: Press the Power Button to turn the unit on.
Step 2: load the CD+G disc into the unit’s CD drive.
Step 3: adjust the Source Dial to CDG.
Step 4: Press the Play/Pause Button to play the loaded disc.
Step 5: Plug in the included microphone to the Mic 1 Connection. adjust the
on/off Switch on the microphone to the on position.
• If feedback noise is present, move the microphone away from the unit
and/or reduce the microphone’s volume.
Step 6: adjust the Volume Dial to adjust the volume of audio output from the
speakers. adjust the Microphone Volume Dial to set the volume of a
connected microphone.
Step 7: Turn the AVC Select Dial to Vocal.
Step 8: Use the AVC Dial to adjust the balance between the music and vocals.
Step 9: Press the Play/Pause Button to play or pause the loaded CD+G.
Programming a CD or CD+G Disc
Step 1: Press the Power Button to turn the unit on.
Step 2: load the CD or CD+G into the unit’s CD drive.
Step 3: adjust the Source Dial to CDG.
Step 4: Press the Program Button to begin programming the disc.
• The Program Indicator Light will illuminate red.
Step 5: Select a CD or CD+G track using the Skip/Search Buttons.
Step 6: once the desired track is selected, press the Program Button.
Step 7: Repeat Step 5-6 until all of the desired tracks are programmed. (19 max)
Step 8: Press the Play/Pause Button to beging playing the programmed tracks.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
IJ328-IB.indd
9
7/10/2008 2:21:42 PM
Video output: Connecting a Television
Step 1: Plug one end of the RCa Cable into the Video Output on the unit.
Step 2: Plug the other end of the RCa Cable into a video input on a television.
Step 3: Set the television to the appropriate video input.
Step 4: Press the Power Button to turn the unit on.
Step 5: Insert a CD+G disc or iPod with video into the unit.
Step 6: adjust the Source Dial to CDG or iPod.
Step 7: If an iPod with video was connected, on the iPod, navigate to either the
Photos or Videos. Select either Slideshow Settings in Photos or Video
Settings in Videos. Set the TV Out setting to On.
Step 8: Press the Play/Pause Button. The connected television will now
display lyrics from the loaded CD+G disc or video and photos from a
docked iPod with video.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
IJ328-IB.indd 10
7/10/2008 2:21:43 PM
audio output: Connecting a Stereo System
Step 1: Plug one end of an RCaaudio Cable into the Audio Output on the
unit.
Step 2: Plug the other end of the RCaaudio Cable into the audio input on a
stereo system.
Step 3: Set the stereo system to the appropriate audio input channel.
Step 4: Press the Power Button to turn the unit on.
Step 5: audio played from the unit will now be heard on the connected stereo
system.
audio Input: Connecting an MP3 Player
Step 1: Plug one end of an RCa -3.5mm Mini-Phono audio Cable into the
Audio Input on the unit.
Step 2: Plug the other end of the RCa-3.5mm Mini-Phono audio Cable into the
audio input on an MP3 player.
Step 3: Set the stereo system to the appropriate audio input channel.
Step 4: Press the Power Button to turn the unit on.
Step 5: adjust the Source Dial to the Aux position.
Step 6: audio played from the connected MP3 Player will now be heard on the
unit.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
IJ328-IB.indd 11
7/10/2008 2:21:43 PM
locations of Controls
9
1
POWER
2
MONITOR
3
OFF
ON
PROGRAM
REPEAT
4
5
MIN
MAX
MIN
MAX
ECHO
AVC
6
7
L
H
L
H
AVC SELECT
SOURCE
PUSH OPEN
iPod
CDG
VOCAL
MUSIC
AUX
MIC 1
MIC 2
8
12
Download from Www.Somanuals.com. All Manuals Search And Download.
IJ328-IB.indd 12
7/10/2008 2:21:43 PM
Control Definitions
1
2
3
4
Monitor
Use the black & white monitor to view song lyrics for karaoke.
Power Button
Press the Power Button to turn the unit off and on.
Monitor Power Switch
adjust the Monitor Power Switch to turn the monitor off and on.
LED Display
The leD Display displays the current audio track, power indicator, play/pause
indicator, program indicator, and repeat indicator.
5
6
7
Microphone Volume Dial
Turn the Microphone Volume Dial to adjust the volume of audio input from a
connected microphone.
AVC Dial
Turn the aVC Dial to adjust the balance between the music and the recorded
vocal colume when singing into the microphone.
AVC Select Dial
In Music Mode the iPod’s track vocals can not be cut out completely even if the
aVC Dial is set to the maximum.
In Vocal Mode, the iPod’s karaoke track vocals can be cut out completely, the
same as playing a CD-G disc.
8
9
Microphone 1 Connection
Use the Microphone 1 Connection to connect a microphone to the unit.
CD Drive
load a CD or CD-G into the CD Drive to play music or sing karaoke.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
IJ328-IB.indd 13
7/10/2008 2:21:43 PM
locations of Controls
10
11
POWER
MONITOR
12
OFF
ON
PROGRAM
REPEAT
13
14
15
MIN
MAX
MIN
MAX
ECHO
AVC
16
17
L
H
L
H
AVC SELECT
SOURCE
PUSH OPEN
iPod
CDG
VOCAL
MUSIC
AUX
MIC 1
MIC 2
18
19
14
Download from Www.Somanuals.com. All Manuals Search And Download.
IJ328-IB.indd 14
7/10/2008 2:21:43 PM
Control Definitions
10 Play/Pause Button
Press the Play/Pause Button to play or pause audio from a docked iPod or a
loaded disc.
11 Stop Button
Press the Stop Button to stop audio from a docked iPod or a loaded disc.
12 Skip/Search Buttons
Press the Skip/Search Buttons to skip from one audio track to the next.
Press and hold the Skip/Search Buttons to search through an individual audio
track.
13 Program Button
Press the Program Button to program audio tracks from a loaded CD or CD-G to
play in a set order.
• Up to 19 tracks can be programmed at one time.
• When in Program Mode, the program indicator light will flash.
14 Repeat Button
Press the Repeat Button to repeat a single audio track or an entire album.
15 Master Volume Dial
Turn the Master Volume Dial to adjust the volume of audio output from the unit.
16 Echo Dial
Turn the echo Dial to adjust the echo effect on audio input from a connected
microphone.
17 Source Dial
Turn the Source Dial to adjust the current source of the unit to iPod, CDG, or
Aux.
18 Microphone 2 Connection
Use the Microphone 1 Connection to connect a microphone to the unit.
19 Dock for iPod
Use the Dock for iPod to connect a compatible iPod to the unit.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
IJ328-IB.indd 15
7/10/2008 2:21:44 PM
locations of Controls
20
24
25
R
L
L
21
22
OUT
MONITOR ADJ
VIDEO
AUDIO
V-HOLD
BRIGHT CONTRAST
IN
R
26
23
16
Download from Www.Somanuals.com. All Manuals Search And Download.
IJ328-IB.indd 16
7/10/2008 2:21:44 PM
Control Definitions
20 Audio Outputs
Use the audio outputs to connect the unit to an external stereo system.
21 Video Output
Use the Video output to connect a television to the unit.
22 Video Input
Use the Video Input to connect a video source to the unit.
23 Audio Inputs
Use the audio Inputs to connect an audio source to the unit.
24 V-Hold Dial
Turn the V-Hold Dial to adjust the vertical hold of the monitor.
25 Contrast Dial
Turn the Contrast Dial to adjust the contrast of the monitor.
26 Brightness Dial
Turn the Brightness Dial to adjust the brightness of the monitor
17
Download from Www.Somanuals.com. All Manuals Search And Download.
IJ328-IB.indd 17
7/10/2008 2:21:44 PM
Locations of Controls & Definitions
33
27
28
29
34
35
30
36
37
31
32
38
27 Menu/Program Button
In iPod Mode, the Menu/Progam Buttom works exactly like the menu button on
the iPod.
In CDG Mode, press the Menu/Program Button to begin programming a CD or
CD+G disc.
• Up to 19 tracks can be programmed at one time.
• When in Program Mode, the program indicator light will flash.
28 Power Button
Press the Power Button to turn the unit off and on.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
IJ328-IB.indd 18
7/10/2008 2:21:44 PM
Control Definitions
29 Select Button
Use the Select Button to make selections in the iPod’s menu.
30 Skip/Search Buttons
Press the Skip/Search Buttons to skip from one audio track to the next.
Press and hold the Skip/Search Buttons to search through an individual audio
track.
31 Chapter Buttons
Press the Chapters Buttons in iPod Mode to cycle through movie chapters on a
docked iPod.
32 Album Buttons
Press the album Buttons in iPod Mode to cycle through albums on a docked
iPod.
33 Play/Pause Button
Press the Play/Pause Button to play or pause a docked iPod or loaded disc.
34 Stop Button
Press the Stop Button to stop audio from a docked iPod or a loaded disc.
35 Up & Down Buttons
Press the Up & Down Buttons to navigate through a docked iPod’s menus.
36 Shuffle Button
Press the Shuffle Button to shuffle songs played from an iPod.
37 Repeat Button
Press the Repeat Button once to repeat an individual song; when activated, the
Repeat Indicator will blink red.
Press the Repeat Button twice to repeat an entire album; when activated, the
Repeat Indicatr will illuminate red without blinking.
38 Playlist Buttons
Press the Playlist Buttons in iPod Mode to cycle through playlists on a docked
iPod.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
IJ328-IB.indd 19
7/10/2008 2:21:44 PM
Parts Information
Address: 2116 Carr Street, St. louis Mo, 63106
Phone: 1-314-621-2881
Fax: 1-314-588-1805
Email: partsinfo@dpi-global.com
Service Information
Address: 2116 Carr Street, St. louis Mo, 63106
Phone: 1-314-621-2881
Fax: 1-314-588-1805
Email: customerservice@ilive.net
Version:
To download this Instruction Manual in english, Spanish, or french visit the Support
Para descargar este manual de instrucción en inglés, español, o francés visite la sección
Pour télécharger ce manuel d’instruction en anglais, espagnol, ou le français visitez la
all other trademarks appearing herein are the property of their respective owners.
Download from Www.Somanuals.com. All Manuals Search And Download.
IJ328-IB.indd 20
7/10/2008 2:21:45 PM
|