Model: iB40
Studio Monitor Style Stereo
Headphones with In-Line
Volume Control
Using Your iHome Headphones
The ear cups are marked “L” and “R”. When worn properly
the headphone cable with in-line volume control will be on
your left side. The two ear cups may be adjusted up or down
for most comfortable fit.
Connect the headphone plug to the headphone jack of your
music player. Be sure that the plug is fully inserted into the
jack. If the plug is not fully inserted you may only hear sound
from one side of the headphones.
If you are using this headphone with an older stereo receiver that has a larger size
headphone jack, attach the supplied 6.3mm headphone plug adapter to the 3.5mm
headphone plug.
To protect your hearing, always start listening with the In-Line Volume Control set to a
low level and gradually increase the volume to a comfortable listening level.
Note: You may have to adjust the volume control on your music player as well as the
In-Line Volume Control on your headphones to find the most satisfactory sound level. If
one control is set too low and the other is set too high, the sound may be distorted. Try
setting the volume control on your music player halfway between the Min and Max
settings, and then use the In-Line Volume Control on your iHome headphones to make
final adjustments.
IMPORTANT! Listening at high volume for long periods of time can result in long-term
hearing damage. For your safety, do not use headphones if they would prevent you from
hearing warning sounds, such as while driving a car or motorcycle, riding a bike, etc.
Remember that studio monitor style headphones such as the iB40 may block outside
noise, including warning sounds. Always be aware of your surroundings and do not use
these headphones in situations that require you to hear warning sounds.
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited 1 Year Warranty
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies),
warrants this product to be free from defects in workmanship and materials, under normal
use and conditions, for a period of 1 year from the date of original purchase.
Should this product fail to function in a satisfactory manner, it is best to first return it to the
store where it was originally purchased. Should this fail to resolve the matter and service still
be required by reason of any defect or malfunction during the warranty period, SDI Technologies
will repair or, at its discretion, replace this product without charge (except for a $5.00 charge
for handling, packing, return UPS/postage, and insurance). This decision is subject to
verification of the defect or malfunction upon delivery of this product to the Factory Service
Center listed below. The product must include proof of purchase, including date of purchase.
The fee for service without proof of purchase is $10.00.
Before returning this product for service, please first replace the batteries (if applicable) with
fresh ones, as exhausted or defective batteries are the most common cause of problems
encountered.
If service is still required:
1.Remove the batteries (if applicable) and pack the unit in a well padded, heavy corrugated
box.
2.Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date
of purchase, if within the warranty period.
3.Enclose a check or money order payable to the order of SDI Technologies, for the sum of
$5.00 ($10.00 without proof of purchase).
4.Send the unit prepaid and insured, to the Factory Service Center listed below.
Consumer Repair Department
SDI Technologies Inc.
1330 Goodyear Drive
El Paso, TX 79936-6420
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was
designed. It does not cover (i) products which have been damaged by negligence or willful
actions, misuse or accident, or which have been modified or repaired by unauthorized persons;
(ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital
media players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this product to
the Factory Service Center and its return to the owner.
This warranty is valid only in the United States of America and does not extend to owners of
the product other than to the original purchaser. In no event will SDI Technologies or any of
its affiliates, contractors, resellers, their officers, directors, shareholders, members or agents
be liable to you or any third party for any consequential or incidental damages, any lost profits,
actual, exemplary or punitive damages. (Some states do not allow limitations on implied
warranties or exclusion of consequential damages, so these restrictions may not apply to
you.) This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state.
Your acknowledgement and agreement to fully and completely abide by the above mentioned
disclaimer of warranty is contractually binding to you upon your transfer of currency (money
order, cashier's check, or credit card) for purchase of your SDI Technologies product.
© 2010 SDI Technologies, Inc. All rights reserved
iB40-082510-A
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|