Model: iDM5
Bluetooth audio system
and wireless keyboard
with speakerphone
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Thank you for purchasing this unit. This product is designed to provide high quality wireless audio and
keyboard input for your iPad, iPhone, iPod, tablet, computer, PDA or other Bluetooth audio device. It also
provides handsfree speakerphone functionality.
Along with the included Quick Bluetooth Connection Guide, this instruction booklet explains the basic
operation and care of the unit. Please read them carefully and keep for future reference.
Maintenance
• Place the unit on a level surface away from sources of direct sunlight or excessive heat.
• Protect your furniture when placing your unit on a natural wood or lacquered finish. A cloth or other
protective material should be placed between it and the furniture.
• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents,
such as Benzene, thinner or similar materials can damage the surface of the unit.
Table of Contents
Meet Your Unit /Setup ...................................................................................................... 1-2
Special Keys / Functions ......................................................................................................3
Charging Devices with the USB Port........................................................................................4
Using Bluetooth: Pairing Your Device.......................................................................................5
Playing Audio Via Bluetooth / Using the Speakerphone..............................................................6
Playing Audio Via Aux / Troubleshooting ................................................................................7
Consumer Product Safety Guide.............................................................................................8
Warranty Information ...........................................................................................................9
Built-in Bluetooth (Version 2.1 + EDR, Class 2) system with remote "pairing" of cell phones to the Unit (supports A2DP, AVRCP, HFP, HSP profiles)
HID Protocol Support: iPad/iPad2, iPhone 3GS or later with the latest iOS and Android platform 3.0 or above.
is a registered trademark of SRS Labs, Inc. TruBass technology is incorporated under license from SRS Labs, Inc.
SRS WOW®, which features TruBass®, significantly improves the playback quality of audio, delivering a dynamic 3D entertainment
experience with deep, rich bass and high frequency clarity for crisp detail.
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC Information
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter
must not be co-located or operating in conjunction with any other antenna or transmitter.
This Device complies with RSS-210 of the IC Rules; Operation is subject to the following two conditions:
(1) This device may not cause interference and
(2) This device must accept any interference received, including interference that may cause undesired operation
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
• Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
• NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Download from Www.Somanuals.com. All Manuals Search And Download.
Volume Down Button
Play/Pause Button
Volume Up Button
Meet Your Unit
Top/Front
Keyboard
Power Button/Power Indicator light
Bluetooth Button/
Pairing Indicator Light
Built-in Microphone
Bluetooth/Aux-in Switch
Reset port
Left Side
Rear
USB Charging Port
USB Mode Switch
DC 5V
Power Jack
Aux Line-in Jack
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Meet Your Unit
Included
iDM5 system
• iDM5 system (keyboard)
AC adaptor
• 100V-240V universal AC adaptor
Setup
Connect to power
Attach included power adaptor to working power outlet
and the other end to the power jack on the rear of the
unit.
RESET
R E S E T
TEST
T E S T
A
4
5V
DC
Resetting the Unit
Rear side
If your unit becomes locked up or otherwise unresponsive,
it may require a reset to default factory settings. To reset
unit, insert a paper clip or similar into the reset port on the
back of the unit and hold briefly. Doing so will lose any
paired device information and you must re-pair your
devices.
DC 5V
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Special keys/functions
Press to toggle iPad/iPhone on-screen keyboard control on/off.
Note: This key is specific to Apple iOS devices, and will have no effect with other devices.
Lower
Raise
Previous Track Play/Pause
Next Track
Mute Audio
Volume
Volume
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Charging Devices with the USB Port
1. The unit can charge a USB device using the USB charging port on the left side of the unit. A USB
cable is not included.
2. To charge a USB device, connect the standard end of the USB cable to the USB port and the other
end to the device you wish to charge.
3. Monitor your device’s battery indicator to confirm the device is charging. If the device is NOT
charging, try moving the USB Mode Switch to a different position (A or B), then unplug the device
from the USB port and reconnect it.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Bluetooth: Pairing Your Device
NOTE: See the iDM5 Bluetooth Connection Guide for complete pairing details.
1. Move the Bluetooth/Aux-in Switch on the lower right front of keyboard to the Bluetooth position (left).
2. Press and release the Button to turn on the unit (the light will turn blue).
3. Turn on Bluetooth capability on your device and make it discoverable (see your device’s instructions
to add or setup a Bluetooth device).
4. Press and hold the Bluetooth Button on the unit until it flashes blue and the unit beeps twice to
indicate pairing attempt. The blue light will flash while the unit attempts to pair.
5. “iDM5” should appear in your device’s list of Bluetooth devices; its status display may indicate “not
connected”. Select iDM5 to connect. If your device asks for a password, enter 1234 on the
keyboard of your device. If no device is paired within 2 minutes, the Button will change from blue
to red. If this occurs, retry steps 2-4.
6. Once paired with a device, the blue
light will glow steadily. There should be an indication on
your device that pairing is complete. On some devices, you must then select “use as a stereo audio
device” or similar on the device’s Bluetooth menu. Once paired, your device should link to the iDM5
whenever within range. You can now use the keyboard with the active app on your device, play
Bluetooth audio and use as a speakerphone.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Audio Via Bluetooth
1. Move the Bluetooth/Aux-in Switch to the Bluetooth position to listen to audio streamed wirelessly from
your paired iPad, iPhone, iPod or other Bluetooth device.
2. Press and release the
previously paired device, and then turn solid blue when a previously paired device is detected.
3. Press and release the Key/Button to play or pause audio from your Bluetooth device.
NOTE: Play/Pause only works in Bluetooth mode. It does not control aux line-in devices.
4. Use the or Keys/Buttons to adjust volume.
5. When done listening, press the Button to turn the unit off.
Button to turn on the unit. The blue
light will flash as the unit searches for a
Using the Speakerphone
1. Move the Bluetooth/Aux-in Switch to the Bluetooth position to use the speakers as a speakerphone for
a linked Bluetooth-capable phone during an incoming or active call. Playing audio is muted during a
speakerphone call.
2. Press and release the
Button to turn on the unit.
3. Use the or
Keys/Buttons to adjust volume. You may wish to adjust the volume on your audio
device, too.
4. When a call is received, playing music is muted to hear the ring tone. Press the green
answer the call, or press the red Button to ignore it.
Button or Button to end the call and resume previous
Button to
5. When the call is completed, press the
function.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Audio via Aux
1. Move the Bluetooth/Aux Switch to the Aux position to listen to audio via aux line-in.
2. Connect a standard 3.5mm stereo audio cable (not included) to the headphone or line-out jack on your
audio device and plug the other end into the aux-in jack located on the back of the keyboard.
3. Press and release the
4. Use the or Keys/Buttons to adjust volume. You may wish to adjust the volume on your audio
device, too.
Button to turn on the unit.
5. When done listening, press and release the Button to turn the unit off. Remember to turn off your audio
device, too.
Troubleshooting
Unit doesn’t respond (no power)
• Check that all connections are correct and properly plugged in. Make sure your device is properly
paired with the iDM5.
Keyboard doesn’t respond (when I type, nothing appears on my tablet/device)
• Touch the tablet/device’s screen to activate the app or browser you wish to input text to. When the
cursor appears, you should be able to input text using the iDM5 keyboard
The on-screen keyboard on my iPad/iPhone/iPod isn’t accessible
• Press the iPad/iPhone keyboard key on unit to toggle the iPad/iPhone/iPod on-screen keyboard
on and off.
Trouble pairing device with iDM5
Bluetooth implementation varies depending on your computer’s hardware and operating system.
• Make sure you have the latest firmware for your iPad, iPhone or iPod (update via iTunes if needed).
• Make sure your device is working properly. Check your device’s manual for details on Bluetooth
pairing and linking.
For further information, visit www.ihomeaudio.com/support
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Consumer Product Safety Guide
IMPORTANT SAFETY INSTRUCTIONS
When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper
use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and
use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit.
1. Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub,
swimming pool or in a wet basement.
2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it
should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it should not be placed in
a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through the ventilation openings.
3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including
amplifiers) that produce heat.
4. Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions or as
marked on the appliance.
5. Power-Cable Protection – Power supply cables should be routed so that they are not likely to be walked on or pinched by items
placed upon or against them. It is always best to have a clear area from where the cable exits the unit to where it is plugged into
an AC socket.
6. Cleaning – The unit should be cleaned only using a warm damp cloth. Do not use solvents, etc.
7. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents
located on the product.
8. Attachments – Do not use attachments not recommended by the product manufacturer.
9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable system during
a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to
lightning and power-line surges.
10. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in a risk of fire
or electric shock.
11. Damage Requiring Service – The unit should be serviced by qualified service personnel when:
A. the power supply cable or plug has been damaged.
B. objects have fallen into or liquid has been spilled into the enclosure.
C. the unit has been exposed to rain.
D. the unit has been dropped or the enclosure damaged.
E. the unit exhibits a marked change in performance or does not operate normally.
12. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month or longer, the power cable
should be unplugged from the unit to prevent damage or corrosion.
13. Servicing – The user should not attempt to service the unit beyond those methods described in the user’s operating instructions.
Service methods not covered in the operating instructions should be referred to qualified service personnel.
Questions? Visit wwwihomeaudio.com
or call 1-800-288-2792 Toll Free
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited 1 Year Warranty
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from
defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase.
Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period,
SDI Technologies will repair or, at its discretion, replace this product without charge (except for a $20.00 charge for handling,
packing, return UPS/postage, and insurance). This decision is subject to verification of the defect or malfunction upon delivery of this
product to the Factory Service Center listed below. The product must include proof of purchase, including date of purchase. The fee
for service without proof of purchase is $50.00.
Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as exhausted or defective
batteries are the most common cause of problems encountered.
If service is still required:
1. Remove the batteries (if applicable) and pack the unit in a well padded, heavy corrugated box.
2. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase, if within the warranty period.
3. Enclose a check or money order payable to the order of SDI Technologies, for the sum of $20.00 ($50.00 without proof of purchase).
4. Send the unit prepaid and insured, to the Factory Service Center listed below.
Consumer Repair Department
SDI Technologies Inc.
1330 Goodyear Drive
El Paso, TX 79936-6420
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which
have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by unauthorized
persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s or tape
cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner.
This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original
purchaser. In no event will SDI Technologies or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members
or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual, exemplary or
punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages, so these
restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually
binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SDI Technologies
product.
© 2012 SDI Technologies, Inc. All rights reserved
iDM5-062012-C
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|