iA5
Download from Www.Somanuals.com. All iMnansuatrlsuSecartcihoAnnd Dmownaloand.ual
iA5
Introduction
Thank you for purchasing the iHome iA5, the
app-enhanced alarm clock for iPhone or iPod.
This instruction booklet explains the basic operation and
care of the unit. There are many exciting performance
enhancements available by downloading the free
iHome+Sleep app from the iTunes App Store.
For information on the iHome+Sleep app and how it
works with your iA5, please vist the App Store and
Note: app is for iPhone and iPod touch only.
Download the FREE iHome+Sleep
app to use these features:
• Social media alerts
• Weather
• Sleep stats
• Interactive alarm settings
Send questions about the iHome+Sleep app to [email protected]
Download from Www.Somanuals.com. All Manuals Search And Download.
iA5
Controls and Indicators
power/app button
(press and hold to access
product config screen from
iHome+Sleep app
Top Panel
p o w e r
homescreen when app is
running)
ZZZ
snooze/dimmer button
dock
Front Panel
– button
(decrease
setting)
+ button
(increase
setting)
bedtime
button
wakeup
button
bedtime
wakeup
display on/auto button
DC jack
Rear Panel
line-in jack
display
eq
clock
alarm
on | auto
sync
eq button clock sync button alarm button
Download from Www.Somanuals.com. All Manuals Search And Download.
1
iA5
Display
Note: Display and indicators depend on mode. The
iA5 is specially designed to work with the
iHome+Sleep alarm clock app. For optimized
compatibility, by default the iA5’s display will auto-
matically deactivate and defer to a docked iPhone or
iPod touch’s display when the iHome+Sleep app is
running (active). To override this and keep the iA5
display on, exit the iHome+Sleep app then press the
display on/auto button located on the back of the
unit. Use the iHome+Sleep app to easily change EQ,
clock sync and alarm settings.
current time
(or alarm time)
iHome app indicator
(app is active)
sleep mode indicator
alarm indicator
pm indicator
(alarm is on and (does not appear
will sound at
set time)
when display is set
to 24 hour mode)
battery low indicator
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Using the
iA5
1
2
RESET
R E S
CR2032
TEST
T E S T
Getting Started
1.Plug the Ac adaptor into the DC jack on the back of the iA5
and the other end into a working outlet.
2.For battery backup, insert included CR2032 battery into
battery compartment on the bottom of the unit. Make sure
battery polarity (+/-) matches diagram. In the event of a
power failure, the backup battery will maintain clock and
alarm settings. When the battery low indicator appears on
the display, the battery needs to be replaced with a fresh
battery.
WARNING: Lithium batteries can explode or cause burns if
disassembled, shorted, recharged, exposed to water, fire, or high
temperatures. Do not place loose batteries in a pocket, purse, or other
container containing metal objects, mix with used or other battery types,
or store with hazardous or combustible materials. Store in cool, dry,
ventilated area. Follow applicable laws and regulations for transport and
disposal.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Using the
iA5
Docking your iPhone/iPod
1. Gently dock your iPhone or iPod to the 30 pin
connector on the front of the unit. Do not force. If you
have not already downloaded the free iHome+Sleep
app from the iTunes App Store, you will see the
following message on your iPhone or iPod Touch
display: “This accessory requires an application that
you do not have installed.” The purpose of this mes-
sage is to advise you that you must download the
iHome+Sleep app to enjoy the enhanced features of
the iA5. However, your iPhone or iPod will work
properly with the iA5 even without the iHome+Sleep
app installed.
Setting the Clock with Time Sync
1.Dock your iPhone or iPod.
2.Press the clock sync button located on the back of the
unit. The unit will attempt to sync to the time on your
iPhone or iPod. When successfully completed, two
beeps will confirm the time has been synced. Retry if
sync is not successful.
Note: iPhone time is automatically updated to the correct
time via cell phone towers. The time on your iPod is
accurate only to the time on the computer the last time
the iPod was synced to it. An iPhone or iPod cannot sync
to exact seconds; it’s possible to have up to 59 seconds
difference between the iA5 and synced iPhone or iPod.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Using the
iA5
Setting the Clock Manually
1.Press and hold the clock sync button located on the
back of the unit until the display flashes.
2.Press the + and - buttons located on the front of the unit
to adjust the time (hold the buttons to adjust rapidly.
Make sure to set the correct AM or PM time (the pm
indicator appears on the lower right of the display;
there is no am indicator).
3.To switch between 12 hour and 24 hour time display,
press the alarm button on the back of the unit at any
time during clock setting mode.
4.Press the clock sync button. Two beeps will sound
confirming clock setting is complete.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Using the
iA5
Setting the Alarm
1.Press and hold the alarm button located on the back
of the unit until the display flashes.
2.Press the + and - buttons located on the front of the unit
to adjust the alarm time (hold the buttons to adjust
rapidly. Make sure to set the correct AM or PM alarm
time (the pm indicator appears on the lower right of the
display; there is no am indicator).
3.Press the alarm button again. The alarm volume will
flash. Press the + and - buttons to adjust the alarm
wake up volume.
4.Press the alarm button. Two beeps will sound
confirming alarm setting is complete.
Note: iPhone or iPod must be docked and in off mode
(not playing) to wake to either.
If no iPhone or iPod is detected, unit will default to
buzzer alarm.
Tip: use the iHome+Sleep app to unlock custom alarm
settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Using the
iA5
Snooze
1.Press the snooze/dimmer button located on top of the
unit while the alarm is sounding. The alarm will be
silenced for 9 minutes (default) then come on again.
2.When alarm is NOT sounding, press and hold the
snooze/dimmer button until the display flashes, then
press the + and - buttons to program the snooze timer
to a different interval (1 to 29 minutes).
3.Press the snooze/dimmer button. Two beeps will
sound confirming snooze programming is complete.
Dimmer
Press the snooze/dimmer button any time the alarm is
NOT sounding to cycle the display brightness through,
Hi, Med, Low and Off settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Using the
Arming and Resetting the Alarm
iA5
1.Press the alarm button located on back of the unit to
turn the alarm ON. An alarm icon will appear on the
display. The alarm will sound at the set time.
2.Press the alarm button at any time to turn the alarm
OFF.
3.Press the power/app button or the wakeup button
when the alarm is sounding to power off the iA5 and
reset the alarm to come on the next day at the same
time.
Bedtime Sleep Timer
The sleep timer lets you sleep to the music currently
playing on your iPhone or iPod before shutting off at a
chosen time.
1. Select and play the music you wish to sleep to.
2. Press the bedtime button to cycle the sleep timer
through 90, 60, 30 and15 minute settings.
3. Press + or - button while in sleep mode to adjust sleep
volume (does not affect normal or alarm volume).
4. Press the power/app button to turn the iA5 off.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Playing and Charging iPhone/iPod
1.Gently dock your playing iPhone or iPod. The iA5 will
turn on and you will hear your audio. If the volume is
too low, the unit may not detect your iPhone or iPod
audio. If this occurs, press the power/app button to
turn the unit on. While docked, your iPhone or iPod
will charge until fully charged.
2.Press + or - button to adjust the volume.
3.Press the eq button located on the back of the unit to
toggle between bass and treble adjustment. Press + or
- button to increase or decrease bass or treble.
4.Press the power/app button to turn the iA5 off.
Using the Line-in Jack
1.Connect
an
audio
cable
(available
at
jack of an audio device and plug the other end into
the line -in jack located on back of the iA5.
2.Turn audio device on and adjust volume on device.
3.Press + or - button to adjust iA5 volume. When
finished, press the power/app button to turn off the
iA5. Remember to turn off your audio device, too.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
iA5
A Consumer Guide to Product Safety
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
This equipment complies with the limits for a Class B digital device as specified
in Part 15 of FCC Rules. These limits provide reasonable protection against
radio and TV interference in a residential area.
However, your equipment might cause TV or radio interference even when it is
operating properly. To eliminate interference you can try one or more of the
following corrective measures:
•Reorient or relocate the receiving antenna.
•Increase the distance between the equipment and the radio or TV.
• Use outlets on different electrical circuits for the equipment and the radio or TV.
• Consult your dealer or an experienced radio/television technician if the
problem still exists.
Modifying or tampering with your system’s internal components can cause a
malfunction and might invalidate the system’s warranty and void your FCC
authorization to operate it.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
Maintenance
•Place the unit on a level surface away from sources of direct sunlight or
excessive heat.
• Protect your furniture when placing your unit on a natural wood and lacquered
finish. A cloth or other protective material should be placed between it and
the furniture.
• Clean your unit with a soft cloth moistened only with mild soap and water.
Stronger cleaning agents, such as Benzene, thinner or similar materials can
damage the surface of the unit.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Consumer Product Safety Guide
When used in the directed manner, this unit has been designed and
manufactured to ensure your personal safety. However, improper use
can result in potential electrical shock or fire hazards. Please read all
safety and operating instructions carefully before installation and use,
and keep these instructions handy for future reference. Take special
note of all warnings listed in these instructions and on the unit.
1. Water and Moisture – The unit should not be used near water. For example:
near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a
wet basement.
2. Ventilation – The unit should be situated so that its location or position does
not interfere with its proper ventilation. For example, it should not be situated
on a bed, sofa, rug or similar surface that may block ventilation openings. Also,
it should not be placed in a built-in installation, such as a bookcase or cabinet,
which may impede the flow of air through the ventilation openings.
3. Heat – The unit should be situated away from heat sources such as radiators,
heat registers, stoves or other appliances (including amplifiers) that produce
heat.
4. Power Sources – The unit should be connected to a power supply only of
the type described in the operating instructions or as marked on the
appliance.
5. Power-Cable Protection – Power supply cables should be routed so that
they are not likely to be walked on or pinched by items placed upon or against
them. It is always best to have a clear area from where the cable exits the unit
to where it is plugged into an AC socket.
6. Cleaning – The unit should be cleaned only as recommended. See the
Maintenance section of this manual for cleaning instructions.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Objects and Liquid Entry – Care should be taken so that objects do not
fall and liquids are not spilled into any openings or vents located on the
product.
8. Attachments – Do not use attachments not recommended by the product
manufacturer.
9. Lightning and Power Surge Protection – Unplug the unit from the wall
socket and disconnect the antenna or cable system during a lightning storm
or when it is left unattended and unused for long periods of time. This will
prevent damage to the product due to lightning and power-line surges.
10. Overloading – Do not overload wall sockets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or electric shock.
11. Damage Requiring Service – The unit should be serviced by qualified service
personnel when:
A. the power supply cable or plug has been damaged.
B. objects have fallen into or liquid has been spilled into the enclosure.
C. the unit has been exposed to rain.
D. the unit has been dropped or the enclosure damaged.
E. the unit exhibits a marked change in performance or does not
operate normally.
12. Periods of Nonuse – If the unit is to be left unused for an extended period
of time, such as a month or longer, the power cable should be unplugged from
the unit to prevent damage or corrosion.
13. Servicing – The user should not attempt to service the unit beyond those
methods described in the user’s operating instructions. Service methods not
covered in the operating instructions should be referred to qualified service
personnel.
or call 1-800-288-2792 Toll Free
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Unit doesn’t respond (no power)
Make sure AC adaptor is connected to unit and is plugged into
a working outlet (plug another device into the same outlet to
confirm outlet is working, and make sure any associated power
switch is ON).
iPhone/iPod does not respond to unit
Make sure you have latest firmware for your iPhone or iPod
(update via iTunes if needed). Make sure your device is working
properly. Check your iPhone or iPod manual for details.
iPhone/iPod does not come on immediately
Your iPhone or iPod battery may be run down or weak or it may
be in deep sleep mode. Charge your iPhone or iPod for about
6 minutes. Try pressing the Menu or Home button.
iHome+Sleep app does not detect unit
1. Your iPhone or iPod must be docked properly while
iHome+Sleep is running to change unit settings.
2. Make sure you have the latest firmware (update via iTunes if
needed).
3. Make sure you’re running the latest iHome+Sleep release
(update via App Store if needed).
4. Reset iPhone or iPod touch
email [email protected]
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited 1 Year Warranty
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants
this product to be free from defects in workmanship and materials, under normal use and conditions,
for a period of 90 days from the date of original purchase.
Should this product fail to function in a satisfactory manner, it is best to first return it to the store where
it was originally purchased. Should this fail to resolve the matter and service still be required by reason
of any defect or malfunction during the warranty period, SDI Technologies will repair or, at its discretion,
replace this product without charge (except for a $10.00 charge for handling, packing, return
UPS/postage, and insurance). This decision is subject to verification of the defect or malfunction upon
delivery of this product to the Factory Service Center listed below. The product must include proof of
purchase, including date of purchase. The fee for service without proof of purchase is $35.00.
Before returning this product for service, please first replace the batteries (if applicable) with fresh ones,
as exhausted or defective batteries are the most common cause of problems encountered.
If service is still required:
1. Remove the batteries (if applicable) and pack the unit in a well padded, heavy corrugated box.
2. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of
purchase, if within the warranty period.
3. Enclose a check or money order payable to the order of SDI Technologies, for the sum of $10.00
($35.00 without proof of purchase).
4. Send the unit prepaid and insured, to the Factory Service Center listed below.
Consumer Repair Department
SDI Technologies Inc.
1330 Goodyear Drive
El Paso, TX 79936-6420
Disclaimer of Warranty
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed.
It does not cover (i) products which have been damaged by negligence or willful actions, misuse or
accident, or which have been modified or repaired by unauthorized persons; (ii) cracked or broken
cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s or tape
cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its
return to the owner.
This warranty is valid only in the United States of America and does not extend to owners of the
product other than to the original purchaser. In no event will SDI Technologies or any of its affiliates,
contractors, resellers, their officers, directors, shareholders, members or agents be liable to you or
any third party for any consequential or incidental damages, any lost profits, actual, exemplary or
punitive damages. (Some states do not allow limitations on implied warranties or exclusion of
consequential damages, so these restrictions may not apply to you.) This warranty gives you specific
legal rights, and you may also have other rights which vary from state to state.
Your acknowledgement and agreement to fully and completely abide by the above mentioned
disclaimer of warranty is contractually binding to you upon your transfer of currency (money order,
cashier's check, or credit card) for purchase of your SDI Technologies product.
© 2010 SDI Technologies, Inc. All rights reserved
Download from Www.Somanuals.com. All Manuals Search And Download.
iA5-012510-A Printed in China
©SDI Technologies 2010 All rights Reserved
Download from Www.Somanuals.com. All Manuals Search And Download.
|