NOTE:
Please read all instructions
carefully before using this
product
Table of Contents
Safety Notice
POWERHOUSE BENCH
PHC -265
Hardware Identifier
Assembly Instruction
Parts List
Warranty
Ordering Parts
Model
PHC 265
Retain This
Manual for
Reference
08-07-02
OWNER'S
MANUAL
IMPEX FITNESS PRODUCTS
14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746
Tel: (800) 999-8899 Fax: (626) 961-9966
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY NOTICE
PRECAUTIONS
This exercise machine is built for optimum safety. However, certain precautions apply
whenever you operate a piece of exercise equipment. Be sure to read the entire
manual before you assemble or operate your machine. In particular, note the following
safety precautions:
1. Keep children and pets away from the machine at all times. DO NOT
leave children unattended in the same room with the machine.
2. Only one person at a time should use the machine.
3. If the user experiences dizziness, nausea, chest pain, or any other abnormal
symptoms, STOP the workout at once. CONSULT A PHYSICIAN
IMMEDIATELY.
4. Position the machine on a clear, leveled surface. DO NOT use the machine
near water or outdoors.
5. Keep hands away from all moving parts.
6. Always wear appropriate workout clothing when exercising. DO NOT wear
robes or other clothing that could become caught in the machine. Running
or aerobic shoes are also required when using the machine.
7. Use the machine only for its intended use as described in this manual. DO
NOT use attachments not recommended by the manufacturer.
8. Do not place any sharp object around the machine.
9. Disabled person should not use the machine without a qualified person or
physician in attendance.
10. Before using the machine to exercise, always do stretching exercises to
properly warm up.
11. Never operate the machine if the machine is not functioning properly.
12. A spotter is recommended during exercise.
WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR
PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE
AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL
INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT.
IMPEX INC.
ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY
DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT.
SAVE THESE INSTRUCTIONS.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Two Adjustable Wrenches.
NOTE: It is strongly recommended two or more people assembling this machine to avoid
possible injury.
STEP 1 (See Diagram 1)
A.) Connect the two Rear Upright Beams (#1) by the Cross Brace (#2) in the mid-span. Align the
holes then secure each end of Cross Brace with one Bracket (#13), two M10 x 2 3/8” Hex
Bolts (#25), four ∅ ¾” Washers (#33), and two M10 Aircraft Nuts (#30).
B.) Insert the Backrest Adjustment Bar (#6) through the selected holes on the Rear Upright
Beams to obtain the desired Backrest incline.
C.) Attach the Left and Right Safety Hooks (#16) & (#17) to the top of the Upright Beams. Secure
each Hook with a M6 Aircraft Nut (#32).
DIAGRAM 1
4
STEP 2 (See Diagram 2)
Download from Www.Somanuals.com. All Manuals Search And Download.
A.) Attach the rear of the Main Seat Support (#3) to the Cross Brace (#2). Secure it with one
Bracket (#13), two M10 x 2 3/8” Hex Bolts (#25), four ∅ ¾” Washers (#33), and two M10
Aircraft Nuts (#30).
B.) Attach the front of the Main Seat Support (#3) to the Front Support (#4). Secure them with
two M10 x 1” Hex Bolts (#26), four ∅ ¾” Washers (#33), and two M10 Aircraft Nuts (#30).
C.) Attach one end of the Diagonal Support (#5) to the Main Seat Support (#3) and secure it with
one M8 x 2 1/8” Hex Bolt (#27), two ∅ 5/8” Washers (#34), and one M8 Aircraft Nut (#31).
Attach the other end of Diagonal Support (#5) to the Front Support (#4). Secure it with one
M8 x 5/8” Hex Bolt (#28) and ∅ 5/8” Washer (#34).
DIAGRAM 2
5
STEP 3 (See Diagram 3)
Download from Www.Somanuals.com. All Manuals Search And Download.
A.) Attach the front holes on the Backrest Supports (#7) to the pivot on the Main Seat Support
(#3). Place the other end of the Backrest Supports (#7) on the Backrest Adjustment Bar (#6).
Place the Backrest Board (#8) onto the Backrest Supports (#7). Secure it with four M6 x 1
3/8” Hex Bolts (#29) and ∅ ½” Washers (#35).
B.) Place the Seat Pad (#9) onto the Main Seat Support (#3). Secure it with four M6 x 1 3/8” Hex
Bolts (#29) and ∅ ½” Washers (#35).
DIAGRAM 3
6
STEP 4 (See Diagram 4)
Download from Www.Somanuals.com. All Manuals Search And Download.
A.) Attach the Leg Developer (#10) to the front of Main Seat Support (#3). Secure it with a
Hex Socket Axle (#23) and Hex Socket Screw (#24). Attach one Spring Clip (#14) onto
the weight post on the Leg Developer.
B.) Insert the two Foam Roll Tubes (#11) halfway through the holes on the Leg Developer.
Push four Foam Rolls (#12) onto the Foam Roll Tubes from both ends.
C.) Attach a ∅3/4” Washer (#33) onto a M10 x 4 ½” Hex Bolt (#43). Insert the Bolt through
the Butterfly (#40) and secure it with a M10 Regular Nut (#44). Insert the Bolt through
the Upright Beam (#1) and secure it with a ∅3/4” Washer (#33) and M10 Knob (#45).
D.) Insert the Butterfly Foam Roll Tube (#41) through the hole on the Butterfly. Push the
Butterfly Foam Roll (#42) onto the Tube.
E.) Repeat Step C & D above to install the other side.
DIAGRAM 4
7
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
KEY NO. DESCRIPTION
Q’ty
2
1
1
Rear Upright Beam
Cross Brace
2
3
4
Main Seat Support
Front Support
1
1
5
6
7
8
Diagonal Support
Backrest Adjustment Bar
Backrest Support
Backrest Board
Seat Pad
1
1
2
1
9
1
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
Leg Developer
Foam Roll Tube
Foam Roll
Bracket
Spring Clip
1
2
4
3
3
2
1
1
6
12
2
16
2
1
1
6
2
1
1
8
8
1
2
20
3
8
1
2
2
2
2
2
2
2
2
∅1” Sleeve
Left Safety Hook
Right Safety Hook
Bushing
1 ½” Square End Cap
1” Square End Cap
∅ 1” End Cap
∅ ¾” End Cap
Hex Socket Axle
Hex Socket Screw
M10x 2 3/8” Hex Bolt
M10 x 1” Hex Bolt
M8 x 2 1/8” Hex Bolt
M8 x 5/8” Hex Bolt
M6 x 1 3/8” Hex Bolt
M10 Aircraft Nut
M8 Aircraft Nut
M6 Aircraft Nut
∅ ¾” Washer
∅ 5/8” Washer
∅ ½” Washer
Weight Bar
Weight Plate 25#
Weight Plate 15#
Weight Plate 10#
Butterfly
Butterfly Foam Roll Tube
Butterfly Foam Roll
M10 x 4 ½” Hex Bolt
M10 Regular Nut
M10 Knob
2
9
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPEX INC.
LIMITED WARRANTY
IMPEX Inc. ("IMPEX") warrants this product to be free from defects in workmanship and material,
under normal use and service conditions, for a period of two years on the Frame from the date of
purchase. This warranty extends only to the original purchaser. IMPEX's obligation under this
Warranty is limited to replacing or repairing, at IMPEX's option.
All returns must be pre-authorized by IMPEX. Pre-authorization may be obtained by calling
IMPEX Customer Service Department at 1-800-999-8899. All freights on products returned to
IMPEX must be prepaid by the customer. This warranty does not extend to any product or
damage to a product caused by or attributable to freight damage, abuse, misuse, improper or
abnormal usage or repairs not provided by an IMPEX authorized service center or for products
used for commercial or rental purposes. No other warranty beyond that specifically set forth
above is authorized by IMPEX.
IMPEX is not responsible or liable for indirect, special or consequential damages arising out of or
in connection with the use or performance of the product or other damages with respect to any
economic loss, loss of property, loss of revenues or profits, loss of enjoyments or use, costs of
removal, installation or other consequential damages or whatsoever natures. Some states do not
allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above
limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied
warranties of merchantability or fitness for a particular purpose is limited in its scope and duration
to the terms set forth herein. Some states do not allow limitations on how long an implied
warranty lasts. Accordingly, the above limitation may not apply to you.
This warranty gives you specific legal right. You may also have other rights which vary from state
to state. Register on-line at www.impex-fitness.com
IMPEX INC.
14777 Don Julian
City of Industry, CA 91746
ORDERING REPLACEMENT PARTS
Replacement parts can be ordered by calling our Customer Service Department toll-free at 1-800-
999-8899 during our regular business hours: Monday through Friday, 9 am until 5 pm Pacific
standard time.
When ordering replacement parts, always give the following information.
1.
2.
3.
4.
Model
Description of Parts
Part Number
Date of Purchase
10
Download from Www.Somanuals.com. All Manuals Search And Download.
|