English
THANK YOU FOR YOUR PURCHASE
Model : iMM9400/9500
Instruction Manual
iLuv is a trademark of jWIN Electronics Corp. iPod is a trademark of Apple Inc. registered in the U.S. and other countries. iPhone is a trademark of Apple Inc.
All logos and brands are property of their respective owners. iPod not included in this package. Features and specifications are subject to change without
prior notification.
© 2009 jWIN Electronics Corp. All rights reserved. No portion of this printed material or product enclosed herewith including design, shape or graphics, may
be reproduced or transmitted in any form without the expressed written consent of jWIN Electronics Corp. by any means, electronic or mechanical, including
photocopying, recording or use of an information storage and retrieval system. Any unauthorized distribution or reproduction of this printed material or
product, or any portion thereof, will be prosecuted to the fullest possible extent of the law.
Mini Audio System for your iPhone® or iPod®
Designed in New York, USA / Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
GETTING STARTED
Operational Instructions - continued
COMPATIBILITY
Changing a program position
Setting the Bass and Treble
CD and MP3 CD Operation
Safety notes for operation of the CD changer
CD changer operation
17
17
17
18
18
18
19
19
19
20
20
20
20
20
20
21
22
22
23
23
23
AUDIO CD
1. Disc Size: 12cm / 8cm
2. Disc Type: CD
Inserting and ejecting a CD
Playing the entire CD
Pause / Stop
Random play
Repeat Play
Track Selection
Search operation
Track intro-scan
Mute function
Program memory for Audio CDs
To clear the programming and resume normal playback
Program memory for MP3 CDs
To clear the programming and resume normal playback
ID3 TAG (Artist / Title)
MP3 CD
1. File Format: MP3 (MPEG 1/2/2.5 Layer 3)
2. Bit Rate: 32Kbps ~ 320Kbps
DIGITAL
AUDIO PLAYER
1. Compatible with most iPod models with dock
connector.
iPod®
2. iPod is a trademark of Apple Inc. registered
in the U.S. and other countries.
3. iPhone is a trademark of Apple Inc.
iPhone®
DISC ERROR
Memory Card and USB Operation
This compact disc player has built-in error compensation circuits to correct for minor defects in a disc. There
are limits, however, to the amount of correction available. In some cases, the CD player may skip some tracks,
or parts of tracks, on a disc during disc play. This problem may be caused by defects (such as scratches) in the
disc being played, which are too large for the error compensation circuits to handle. If you encounter this
problem, try a new disc before having the unit serviced. If the CD player operates normally, the skipping
problem is probably due to a defective disc.
Playing MP3 / WMA audio files SD / MMC memory cards or USB devices
Care and Maintanence Guide
User Safety Guide
24
25
32
Note: Only the above types of discs can be played on this unit. Some CD-R, CD-RW discs cannot be played
depending on the condition of the player and the disc.
Specifications
MP3 (MPEG 1 Audio Layer 3)
MP3, technically referred to as MPEG 1 Audio Layer 3, is one of the popular digital audio encoding
and lossy compression formats. This encoding format was developed to reduce the amount of
data (or audio information) required to represent audio, yet to still reproduce audio as same as the
original uncompressed audio for most listeners.
3 | iLuv
iMM9400/9500 | V10M10_IM_EN_060509
iLuv | 4
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
GETTING STARTED
Wall-mounting Installation
CAUTION This product may be used only with iLuv iMM9400/9500 stand.
Use with other stands may result in instability causing possible injury.
Secure the center unit and speakers on the wall (Solid concrete wall or wooden wall should be
used) using 8 dowels and 8 screws (supplied) as shown below:
Main Unit Assembly and Disassembly
1
2
3
1
1
2
Speaker Assembly and Disassembly
1
1
2
3
2
2
5 | iLuv
iMM9400/9500 | V10M10_IM_EN_060509
iLuv | 6
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
GETTING STARTED
Location of Controls (Top View of Main Unit)
Location of Controls (Front View of Main Unit) - continued
17
1
3
4
5
6
7
2
18
1
3
28
27
19
20
26
21
2
4
11
13
10
9
8
16 15 14
12
1. TIME SYNC/TIME SET
2. iPod / iPhone dock
9. DOWN (
10. PREV (
)
AUX IN
PHONES
)
3. PLAY / PAUSE (
4. FM MODE / STOP (
)
11. DIMMER
12. DISPLAY
25
24 23
22
)
5. TIMER/MEMORY
13. CD SELECTION 1- 4
14. VOLUME + / -
15. AM/FM
17. iPod Dock Cover
18. POWER (
19. OPEN/CLOSE R
23. SD Slot
6. UP (
)
)
24. USB Port
25. AUX IN Jack
26. LCD screen
7. SELECT
8. NEXT (
)
16. MODE
20. Right CD door
21. Remote control sensor
22. Headphone Jack
27. Left CD door
28. OPEN/CLOSE L
7 | iLuv
iMM9400/9500 | V10M10_IM_EN_060509
iLuv | 8
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
GETTING STARTED
Location of Controls (Rear View of Main Unit)
Antenna Connection
You can achieve acceptable reception if you use the supplied FM pigtail antenna. If so, the antenna
should be elongated and not coiled or bunched up. If it hangs freely, it can be quite effective.
Speaker Connection
Insert LEFT speaker’s striped wire into LEFT channel’s speaker block by pressing the RED lever and
inserting the striped wire into the open hole. Do the same with the LEFT speaker’s non-striped wire and
the BLACK lever. Repeat for the RIGHT channel SPEAKER block and the RIGHT speaker’s wire.
Subwoofer Connection
This unit includes a subwoofer output jack on the rear panel labeled “SUBWOOFER”. You may connect an
external, powered subwoofer (included with iMM9500 only) using a single RCA-type cable as shown below.
30
31
32
(Cable and subwoofer
Subwoofer
29
included with
iMM9500 only)
33
AC Power Connection
29. AC Power Socket
30. FM antenna
31. Left speaker output
32. Subwoofer output
33. Right speaker output
Connect the power cable (included in the accessories) first to the power socket at the unit and then insert
the power plug into the wall outlet. When you disconnect the plug from a socket, do not pull the cable,
always pull the plug.
Note: When the unit is connected to AC power, it is in Standby mode. To switch off the unit completely,
remove the plug from the AC outlet.
Once the unit is plugged in, its time display will start flashing. Refer to “Setting the clock”on P. 13,
to set the current time
9 | iLuv
iMM9400/9500 | V10M10_IM_EN_060509
iLuv | 10
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
GETTING STARTED
Location of Controls (Remote Control)
First Time Use of Remote Control
For the first time use, the battery is pre-installed for your convenience. Pull
out the insulation tag from the button battery tray before operating the
remote control as shown below.
34. POWER (
35. iPod
36. CD
)
34
62
61
60
59
58
57
35
36
37. iPod MENU
38. PREV (
)
39. VOL +/-
40. DISC 1 - 4
37
41. BASS
/
42. DISPLAY
43. REPEAT (
44. DIMMER
45. SLEEP
46. INTRO
47. MUTE
48. RANDOM (SHUFFLE) (
49. TIME SYNC/TIME SET
50. TREBLE
56
55
54
38
)
Battery Installation
1. Remove the battery tray by pressing point inside, then sliding at the same time.
53
39
40
52
51
)
1
/
51. PLAY / PAUSE (
52. FM MODE/
53. TIMER/MEMORY
)
41
50
42
43
44
45
49
48
47
46
2. Pull out the battery tray.
3. Install or replace the button-type battery “CR2032”(supplied).
4. Close the battery tray.
54. DOWN (
55. SELECT
56. NEXT (
)
)
3
57. UP (
)
58. MP3 INFO
59. AUX
60. AM/FM
61. USB
62. SD Card
Warning: Incorrect placement of the battery may cause malfunction of the
remote control and/or personal injury to the user. Replace only with
or equivalent batteries.
2
4
Please note the polarity when you install the battery.
11 | iLuv
iMM9400/9500 | V10M10_IM_EN_060509
iLuv | 12
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONAL INSTRUCTIONS
OPERATIONAL INSTRUCTIONS
Setting the Clock
Timer
Setting the time using the Time Sync function
Setting the timer
The easiest way to set the clock on the iMM9400/9500 is to synchronize it with the atomic clock
function on your iPhone or iPod. This unit is equipped with a Time Sync function which automatically
sets the time by synchronizing it with your iPhone or iPod, when it is placed in the dock.
You can set automatic switch-on and switch-off times with the built-in timer. Before you do this, be
sure the clock is set correctly.
·
With the power turned ON and the power connected, the Time Sync function is automatically
enabled as indicated by “TIME SYNC”on the display.
When your iPhone or iPod is placed in the dock, the unit will begin authentication.
During authentication, the unit will update the time according to your iPhone or iPod.
1. With the unit on, press DISPLAY until “TIMER ON”appears on the display.
2. Press TIME SYNC/TIME SET and the hour will begin to flash.
Use or to set the hour of the desired switch-on time.
Press SELECT to confirm and go to minute setting.
3. To set the minutes, press or to adjust.
Confirm by pressing SELECT.
4. Press DISPLAY to proceed to setting the switch-off time.
5. Set the switch-off time using the same procedure as
switch-on time setting.
·
·
To turn off the Time Sync Function, follow these instructions:
·
Press TIME SYNC/TIME SET to turn OFF/ON the Time Sync function. If the Time Sync function is
turned off, the unit will not sync the time from your iPhone or iPod.
Notes: The unit takes about 2 minutes (max) to synchronize the time from iPhone or iPod while “TIME SYNC”flashes
on LCD. Time Sync is complete will when “TIME SYNC”shows steadily on the display.
When the Time Sync function is ON, the iMM9400/9500 will always synchronize the time when your iPhone or
iPod is docked. To disable this function, turn off the Time Sync function once the correct time has been set.
6. Press DISPLAY, as necessary to check the current time,
Timer On, and Timer Off.
7. Press and hold TIMER/MEMORY for three (3) seconds to
activate the timer.
Setting the time manually
When you first plug in the unit, the display shows:
Note: To set the clock to the current time, proceed as follows:
When the unit is in Standby mode, the programmed length of time from the last operating mode (CD,
iPod, TUNER, SD, or USB), before it was last switched off remains in effect. Make sure the tuner is tuned
to a radio station, or is in CD, iPod, SD or USB operation, a CD, iPod, SD card or USB must be inserted.
1. Press and hold TIME SYNC/TIME SET for three seconds. The hour flashes.
2. Enter the hour by pressing
3. Confirm the entry by pressing SELECT. The minutes will flash.
4. Enter the minutes by pressing or and confirm with SELECT.
or
.
Setting the sleep timer
The time will always show in the display while in any mode (Tuner, CD, iPod, SD Card, USB and AUX).
The time is also displayed when the unit is turned off.
When the unit is in operation it can be set to automatically switch-off 5 to 120 minutes later. Press
SLEEP, as necessary, until the desired delay time appears on the display. The sleep timer can be set for:
5, 10, 15, 20, 30, 60, 90, and 120 minute intervals. The unit automatically turns off after the entered
time has elapsed.
Press TIME SYNC/TIME SET repeatedly, the display will show, “TIME SYNC ON”or “TIME SYNC OFF.”
13 | iLuv
iMM9400/9500 | V10M10_IM_EN_060509
iLuv | 14
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONAL INSTRUCTIONS
OPERATIONAL INSTRUCTIONS
Basic Operation with iPhone or iPod
Amplifier and Radio Operation
Installing the dock adapter
Switching the unit ON
Before docking your iPhone or iPod on iMM9400/9500, a dock adapter must be properly installed. Please
make sure you are using a correct dock adapter for your iPhone or iPod and that it is properly inserted
into the universal adapter of iMM9400/9500. Failure to do so may damage your iPhone or iPod.
Press to turn on the system.
Selecting the mode
The different operating modes can be directly selected by repeatedly pressing MODE on the top panel or
iPod, SD Card, USB, CD, AUX or AM/FM on the remote control.
Playing your iPhone or iPod
1. Carefully dock your iPhone or iPod.
1.
2. Press to turn on the unit. Repeatedly press MODE until
“iPod”shows on the display. If not in already in iPod mode,
press to begin playback of your iPhone or iPod .
Adjusting the volume
To adjust the volume, press VOLUME +/-.
To turn the sound off, press MUTE. This function is indicated
3. Press the or
to select desired track.
when the word,
appears in the display.
4. Press and hold the or
to search track.
By pressing MUTE or VOLUME +/- again, the sound will
turn back on.
Pause
To briefly interrupt playback, press
.
Dimmer control
1. Press DIMMER to adjust the brightness of LCD backlight.
2. There are three steps including “Off,” “ Low “ , “ High “
1. Press again to restart play.
2. To end the iPod playback, select another mode,
or press to turn OFF the unit.
Headphone jack
The headphone jack is for headphones equipped with a 3.5mm jack. Use an adapter (sold separately) if
your headphone has a different plug. The speakers are automatically switched off when the headphones
are being used.
Repeat
Press while your iPhone/iPod music is playing.
1. Press once during iPhone/iPod music is playing. Current track will repeat.
2. Press twice during iPhone/iPod music is playing. All tracks will repeat.
AM/FM radio operation
1. Turn the unit on by pressing
.
Shuffle
2. Switch to the Tuner operating mode by pressing AM/FM.
Press while your iPhone/iPod music is playing.
·
Press while iPhone/iPod music is playing. iPod will start random playing. Press again to change
Manual station selection
normal playing mode.
1. Press AM/FM to switch between AM and FM.
2. Press or
to tune to the desired radio station.
Charging your iPhone or iPod
To charge your iPhone or iPod, insert your iPhone or iPod into the built-in universal dock. Ensure that
iMM9400/9500 is connected to an outlet.
15 | iLuv
iMM9400/9500 | V10M10_IM_EN_060509
iLuv | 16
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONAL INSTRUCTIONS
OPERATIONAL INSTRUCTIONS
Amplifier and Radio Operation - continued
CD and MP3 CD Operation
Station search (seek) operation
Safety notes for operation of the CD changer
·
Holding down or
for approximately 1 second starts the search operation and determines the
Press OPEN/CLOSE to open the right or left CD cover. The right and left CD cover do not open or close
at the same time. Make sure the cover is not obstructed by any objects. This must also be ensured when
closing the CD cover. The disc loader may only be opened or closed only by pressing OPEN/CLOSE. Be
careful that no foreign objects fall into the unit when the disc compartment is open.
Under no circumstance should the laser pick-up lens be touched. Never look directly at the beam.
direction of the search. The search operation simply finds stations with strong signals.
Stations with weak reception can only be tuned in manually.
Stereo / Mono
Repeatedly pressing FM MODE/ switches between stereo and
mono reception. The stereo reception of a station in the FM band
is indicated on the display.
In the case of stereo stations with a bad (noisy) reception, we
recommend switching tuner to mono reception. Press FM MODE/
In the display, the message “ST”will disappear in mono mode.
CD changer operation
Switch the unit on by pressing . To turn on the CD mode, repeatly press MODE on unit or press CD on
the remote control. The unit will read the disc after selecting the CD mode.
.
If there is no CD inside, the following will appear after a few seconds:
Programming preset stations
The program memory allows you store 40 stations (10 AM / 30 FM).
1. Tune to the desired station.
2. Press TIMER/MEMORY. “MEMORY”will show on the display.
Then press or until the desired memory preset number
appears.
3. Press TIMER/MEMORY again to store the station along with
its preset. Repeat as necessary.
4. Press or to switch between programmed preset stations.
Inserting and ejecting a CD
Changing a program position
If a memory position needs to be replaced by a station other than the current one, the new station can be
programmed as described above, and this will automatically replace the original station.
The CD compartment is opened by pressing OPEN/CLOSE.
1. Insert the disc with the unlabelled side facing the unit.
Press the center of the disc until it clicks into place in the tray.
2. To remove the CD, hold it by the edges and lightly press on
the holder to remove it.
Setting the Bass and Treble
·
·
Press BASS
Press TREBLE
or to adjust the bass sound up or down (the bass sound level from +5 to -5).
or to adjust the treble sound up or down (the treble sound level from +5 to -5).
3. Then close the disc compartment by pressing OPEN/CLOSE.
After closing the disc cover, the CD system immediately begins to scan the content of the compact disc.
17 | iLuv
iMM9400/9500 | V10M10_IM_EN_060509
iLuv | 18
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONAL INSTRUCTIONS
OPERATIONAL INSTRUCTIONS
CD and MP3 CD Operation - continued
CD and MP3 CD Operation - continued
Playing the entire CD
Press to play all CDs.
Repeat play
1. Press once and the track being played will replay continuously. “ 1”will appear on the display.
2. Press twice to play the current CD continuously. “ ALL”will display.
3. Press three times to have the all CDs played continuously.
Once the playback of one CD has finished, the next inserted CD begins, and so on.
Note: If the CD player is in the stop position, you can start the currently indicated CD by pressing
If you select a different CD by pressing CD SELECTION 1 - 4 . Playback will start automatically.
.
Track selection
Press or
to select the desired tracks.
For MP3 CD, change folder (album) by pressing
or
.
Search operation
Pause / Stop
To pause playback, press
While the CD is in play mode you can scan tracks by holding down or . The CD will continue to play
until you find the track you want. When you release the button the unit will resume normal play mode.
. The display indicates:
1. Press again to restart play.
2. To end the playback, press FM MODE/
Track intro-scan
.
1. Press INTRO while in stop mode to play the first 10 seconds of each track on all inserted CDs.
2. Press INTRO again and the selected track will play.
Random play
1. Press
before or during CD play. The tracks in the CD
Mute function
will be played in random sequence.
2. To cancel random play, press FM MODE/ , or press again.
”will disappear from the display.
If MUTE is pressed, the audio output will be muted, and the “MUTE”indicator will be displayed.
To cancel “MUTE”press MUTE once more or press VOLUME +/-.
“
Program memory for Audio CDs
The built-in program memory lets you play up to 40 tracks in the order of your choice. A track can be
stored more than once within the program.
1. Load the CDs.
2. Press TIMER/MEMORY in the stop mode to switch to programming mode. “MEMORY”will blink
on the display.
19 | iLuv
iMM9400/9500 | V10M10_IM_EN_060509
iLuv | 20
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONAL INSTRUCTIONS
OPERATIONAL INSTRUCTIONS
CD and MP3 CD Operation - continued
CD and MP3 CD Operation - continued
3. Press or to select the track to be programmed.
Program memory for MP3 CDs
4. Press TIMER/MEMORY to save the track in the first program location. For example, if you selected
track number 14, it will appear in Program position 1 as shown below.
5. For the next program position, select another desired track (It is not necessary to select CD if the
track is in the same CD).
The built-in program memory enables up to 40 titles to be played from one disc in the order of your
choice. Any title can be stored more than once within one program.
1. Load the CDs.
2. Press TIMER/MEMORY in the stop mode to switch to programming mode.
3. Select the desired folder (album) by repeatedly pressing
or
.
4. Select the desired track by pressing or
to select:
6. Confirm the selection using the TIMER/MEMORY.
7. To program other tracks in the memory, repeat steps 3 - 6.
5. Confirm selection using TIMER/MEMORY to save the track in the first location.
6. To store the remaining titles in the memory, repeat Steps 3-5.
To play the program, press . The program can be played back again as long as “MEMORY”appears
on the display.
To play back the program, press
as long as “MEMORY”appears on the display.
. When
is pressed, the program can be played back again
To clear the programming and resume normal playback
The programming is erased by pressing FM MODE/ until the “MEMORY”display disappears,
or by opening the CD changer door. If the unit is switched off, the program is erased.
To clear the programming and resume normal playback
The programming is erased by pressing FM MODE/ in the programming mode (until “MEMORY”
display disappears), or by opening the disc compartment.
Notes
1. RANDOM will not function in programmed play.
2. This unit counts all the folders on an MP3 disc, even if a folder doesn’t contain any MP3 file(s).
If you select a folder which doesn’t contain any MP3 file(s), the unit will automatically skip to the
Note:
is not used for programming.
next folder until it finds one containing an MP3 file(s).
ID3 TAG (Artist/Title)
1. When an MP3 disc is playing, MP3 INFO repeatedly. The track no., title and artist information
will be shown in the display if disc information is available.
2. To resume normal play display, press MP3 INFO repeatedly until playing time reappears.
21 | iLuv
iMM9400/9500 | V10M10_IM_EN_060509
iLuv | 22
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE AND MAINTENANCE GUIDE
Memory Card and USB Operation
·
Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to contact with
the shiny, unprinted side of the disc.
Do not attach adhesive tape, stickers etc., to the disc label.
Clean the disc periodically with soft, lint-free, dry cloth. Never use detergents or adhesive
cleaners to clean the disc. If necessary, use a CD cleaning kit.
If disc skips or gets stuck on a section of the disc, it is probably dirty or damaged (scratched).
When cleaning the disc, wipe in straight lines from the centre of the disc to the edge of the disc.
Never wipe in circular motions.
To remove a disc from its storage case, press down on the centre of the case and lift the disc outs,
holding it carefully by the edges.
Fingerprints and dust should be carefully wiped off the disc’s recorded surface with a soft cloth.
Unlike conventional records. compact disc have no groove to collect dust and microscopic debris,
so gently wiping with a soft cloth should remove most particles.
Playing MP3/WMA audio files from SD/MMC memory cards or USB Devices
·
·
1. Press MODE repeatedly or SD Card or USB until the main
display shows “ “, for SD card or “
”for USB.
2. Insert the SD or MMC flash memory card or USB flash
containing MP3/ WMA audio files into the card slot by gently
pressing into position until it locks in place. Cards and USB
devices can only be inserted one way.
·
·
·
·
3. After reading the card or USB, the unit will play automatically.
4. Press
to pause playback.
5. Press or to skip tracks.
6. Press or to skip folders (albums).
7. Press MP3 INFO to display title, album and artist information.
· Playback will continue until the last track has played and
then the display will again show the total number of tracks,
albums on the card.
8. Press FM MODE/ to stop playback at any time, the display
will show the total number of files tracks and directories albums
on the card. For example “08”folders (albums), “49”tracks.
CLEANING THE UNIT
·
·
To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning.
The finish on the unit may be cleaned with a dust cloth and cared for as other furniture, Use caution
when cleaning and wiping the plastic parts.
·
·
If the cabinets become dusty wipe them with a soft dry dust cloth. Do not use any wax or polish
sprays on the cabinets.
If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft cloth
slightly dampened with a mild soap and water solution. Never use abrasive cloths or polishes as these
will damage the finish of your unit.
Caution: Never allow any water or other liquids to get inside the unit while cleaning.
23 | iLuv
iMM9400/9500 | V10M10_IM_EN_060509
iLuv | 24
Download from Www.Somanuals.com. All Manuals Search And Download.
USER SAFETY GUIDE
USER SAFETY GUIDE
IMPORTANT SAFETY INSTRUCTIONS - continued
WARNING
provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
· TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
· THIS APPLIANCE SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING WATER AND THAT NO
OBJECT FILLED WITH LIQUIDS SUCH AS VASES SHALL BE PLACED ON APPARATUS.
11. Only use attachments/accessories specified by the manufacturer.
The lightning flash with an arrowhead symbol within an equilateral
triangle is intended to alert the user of the presence of un-insulated
“dangerous voltage”within the product’s enclosure that may be of sufficient magni-
tude to constitute a risk of electric shock to people.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use
caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
15. Grounding or Polarization – This product may be equipped with a polarized alternating-current
line plug (a plug having one blade wider than the other). This plug will fit into the power outlet
only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the polarized plug.
CAUTION
WARNING: To reduce the risk of electric shock, do not remove cover (or back).
No user-servic-able parts inside. Refer servicing to qualified service personnel.
RISK OF ELECTRIC
SHOCK DO NOT OPEN
The exclamation point within an equilateral triangle is intended to
alert the user of the presence of important operating and maintenance
(servicing) instruction in the literature accompanying the apliance.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions
Alternate Warnings – This product is equipped with a three-wire grounding-type plug, a plug
having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This
is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to
replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.
2. Keep these instructions
3. Heed all warnings
4. Follow all instrtuctions
5. Do not use this apparatus near water
6. Clean only with dry cloth
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong are provided for your safety. If the
16. Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure
reliable operation of the product and to protect it from overheating, and these openings must
not be blocked or covered. The openings should never be blocked by placing the product on
a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in
installation such as a bookcase or rack unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
17. The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect
device shall remain readily operable.
25 | iLuv
iMM9400/9500 | V10M10_IM_EN_060509
iLuv | 26
Download from Www.Somanuals.com. All Manuals Search And Download.
USER SAFETY GUIDE
USER SAFETY GUIDE
IMPORTANT SAFETY INSTRUCTIONS - continued
FCC NOTICE TO A USER IN USA
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
CLEANING
Always disconnect unit from power supply before attempting to clean it.
Use soft clothmoistened with soapy water, and wipe gently. Do not use
solvents or abrasive materials.
LASER SAFETY
This unit uses laser technology. Only a qualified professional should remove
the cover or attempt to service this device, due to possible eye injury.
CLASS I LASER
PROCUCT LUCKAN
1 LASERLAITE
KLASS
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
CAUTION – CLASS 1 LASER PRODUCT
1 LASERAPPARAT
Use of controls adjustments and/or performance of procedure other than
specified herein may result in hazardous radiation exposure.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
DANGER
Invisible laser radiation when open and interlock failed or defeated. Avoid
direct exposure to beam. CAUTION: HAZAROUS LASER RADIATION WHEN
OPEN AND INTERLOCK DEFEATED.
FCC RULES
This device complies with Part 15 of the FCC Rules. Operation is subject to the condi-
tion that this device does not cause harmful interference.
Note: Do not make changes or modify the device in any way. Changes or modifications
not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
YOU CAN HELP TO PROTECT THE ENVIRONMENT!
Please remember to respect the local regulations: Hand in the non-working electri-
cal equipment to an appropriate waste disposal center.
FOR USED BATTERIES
Disposed of the used batteries properly. Please follow the local regulations for the
battery disposal.
27 | iLuv
iMM9400/9500 | V10M10_IM_EN_060509
iLuv | 28
Download from Www.Somanuals.com. All Manuals Search And Download.
USER SAFETY GUIDE
USER SAFETY GUIDE
FCC NOTICE TO A USER IN USA - continued
IC NOTICE TO A USER IN CANADA
Since digital circuitry may cause interference to other radio or television tuners nearby, switch this
unit off when not in use or move it away from the affected radio/television tuner.
IMPORTANT NOTES ON HEARING
Your hearing is very important to you and to us, so please take care when operating
this equipment. We strongly recommend you to follow the guideline below in order to
prevent possible damage or loss of hearing.
NOTE: This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus as set out in the Radio Interference Regulations of Industry Canada. These limits
are designed to provide reasonable protection against harmful interference in a residential instal-
lation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television operation (which can be
determined by turning the equipment off), the user is encouraged to try to correct the interference
by one or more of the following measures:
If you continuously listen to the loud sounds, your hearing will adapt to continuous
loud sounds and will give you the impression that the volume has been reduced. What
seems normal to you may in fact be harmful. To guard against this BEFORE YOUR HEAR-
ING ADAPTS, set the volume at a low level and slowly increase the volume level until
you can hear comfortably and clearly without distortion. Damage to your hearing is
accumulative and is irreversible. Any ringing or discomfort in the ears indicates that
the volume is too loud. Once you have established a comfortable listening level, DO
NOT INCREASE THE VOLUME LEVEL FURTHER.
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
In the use of headphones, please take more attention. Hearing experts say that listen-
ing to a loud music can damage your hearing, especially when listening to music with
headphones.
· Consult the dealer or an experienced radio / TV technician for help.
WARNING!
•
The apparatus shall not be exposed to dripping or splashing and that no objects
filled with liquids, such as vases, shall be placed on apparatus.
•
Mains plug is used as the disconnect device. It shall remain readily operable and
should not be obstructed during intended use. To be completely disconnected, the
apparatus from supply mains, the mains plug of the apparatus shall be disconnected
from the mains socket outlet completely.
29 | iLuv
iMM9400/9500 | V10M10_IM_EN_060509
iLuv | 30
Download from Www.Somanuals.com. All Manuals Search And Download.
USER SAFETY GUIDE
SPECIFICATIONS
ADDITIONAL IMPORTANT INSTRUCTIONS
•
GENERAL
1. Power requirement
a. Main unit:
· Place the apparatus with some distances from the nearby objects or walls for sufficient
ventilations. The ventilation should not be impeded by covering the ventilation openings with
items such as newspapers, table-cloths, curtains, etc.
· No naked flame sources such as lighted candles should be placed on the apparatus.
· Dispose of used batteries properly. Follow the local regulation for the battery disposal.
i. AC: 120V 60Hz (iMM9400)
110V / 220V, 60Hz/50Hz (iMM9400D)
230V, 50Hz (Europe only)
ii. DC: 1 x CR2032 for Remote Control
b. Subwoofer: AC 100-240V, 50/60Hz (only for iMM9500)
2. Power consumption:
· Use this apparatus in the moderate climates. It is recommended not to use this apparatus such in
a lighting storm.
a. Main unit: 50 Watts max.
b. Subwoofer: 70 Watts (iMM9500) max.
3. Unit Dimension (w/ stand)
a. Unit: 440 (W) x 110 (D) x 428 (H) mm (17.3”x 4.5”x 16.9”)
b. Speakers: 148 (W) x 108 (D) x 415 (H) mm (5.8”x 4.3”x 16.3”)
c. Subwoofer: 170 (W) x 240 (D) x 260 (H) mm (6.7”x 9.5”x 10.2”)
•
RECEIVER SECTION
1. Receiving bands: AM/FM
2. Tuning range
a. AM: 530-1710kHz ; 522-1620kHz (Europe only)
b. FM: 87.5 - 108MHz
•
•
CD PLAYER SECTION
1. Playback system: 4 CD front loading changer
2. Frequency response: 60 - 20,000 Hz
AUDIO SECTION
1. Power output:
a. Satellite speaker: 10 Watts (RMS) per channel
b. Subwoofer: 30 Watts RMS (only for iMM9500)
2. Speaker impedance:
a. Satellite: 3 ohms
b. Subwoofer: 8 ohms (only for iMM9500)
3. Headphone impedance: 8 - 32 ohms
31 | iLuv
iMM9400/9500 | V10M10_IM_EN_060509
iLuv | 32
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
MEMO
33 | iLuv
iMM9400/9500 | V10M10_IM_EN_060509
iLuv | 34
Download from Www.Somanuals.com. All Manuals Search And Download.
|