AQ5311D
AQ5311D BK
ENGLISH
USER MANUAL
DEUTSCH
FRANCAIS
NEDERLANDS
SVENSKA
ITALIANO
TABLE OF CONTENTS
FOR YOUR SAFETY ..............................................................................
SAFETY PRECAUTIONS .................................................................
SPECIAL NOTES ON LCD MONITORS .............................................
CUSTOMERSERVICE ......................................................................
CLEANING .......................................................................................
1
1
3
3
3
BEFOREYOU OPERATETHE MONITOR ................................................
FEATURES .......................................................................................
CHECKINGTHE CONTENTS OF THE PACKAGE .............................
CONTROLSAND CONNECTORS ....................................................
CONNECTING YOUR MONITOR ......................................................
COMPUTERSETTING .......................................................................
ADJUSTINGTHE HEIGHTANDTHE VIEWINGANGLE ....................
PANELROTATION ............................................................................
4
4
4
5
6
8
9
9
OPERATINGTHEMONITOR ................................................................... 10
ADJUSTMENTMENUCONTENTS .................................................... 11
SCREENADJUSTMENTS ................................................................. 14
POWERMANAGEMENTFEATURE .................................................. 17
TROUBLE SHOOTING ............................................................................ 18
APPENDIX .............................................................................................. 19
SPECIFICATIONS ............................................................................. 19
COMPLIANTTIMING ......................................................................... 20
CONNECTORPINASSIGNMENT ...................................................... 21
Thank you very much for choosing the iiyama LCD monitor.
We recommend that you take a few minutes to read carefully through this brief but
comprehensive manual before installing and switching on the monitor. Please keep this
manual in a safe place for your future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
FOR YOUR SAFETY
SAFETY PRECAUTIONS
WARNING
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and
contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause
fire or electric shock.
NEVER REMOVE THE CABINET
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or
electric shock.
DO NOT PUT ANY OBJECT INTO THE MONITOR
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug your
monitor immediately and contact your dealer or iiyama service center. Using the monitor with any object
inside may cause fire, electric shock or damage.
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE
The monitor may cause an injury if it falls or is dropped.
DO NOT USE THE MONITOR NEAR WATER
Do not use where water may be splashed or spilt onto the monitor as it may cause fire or electric shock.
OPERATE UNDER THE SPECIFIED POWER SUPPLY
Be sure to operate the monitor only with the specified power supply. Use of an incorrect voltage will
cause malfunction and may cause fire or electric shock.
PROTECT THE CABLES
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy objects
on the cables. If damaged, the cables may cause fire or electric shock.
ADVERSE WEATHER CONDITIONS
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in power
may cause malfunction. It is also advised not to touch the plug in these circumstances as it may cause
electric shock.
FOR YOUR SAFETY
1
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
INSTALLATION LOCATION
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky
areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines
directly on the monitor.
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not place
any heavy objects on the monitor, and that all cables are routed such that children may not pull the cables
and possibly cause injury.
MAINTAIN GOOD VENTILATION
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause fire. To
allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls.
Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the cabinet will be
blocked and the monitor may overheat if the stand is removed. This may cause fire or damage. Operating
the monitor on its back, side, upside down or on a carpet or any other soft material may also cause
damage.
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal cable
is disconnected. If you do not disconnect them, it may cause fire or electric shock.
UNPLUG THE MONITOR
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid
accidents.
HOLD THE PLUG WHEN DISCONNECTING
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable itself as
this may cause fire or electric shock.
DO NOT TOUCH THE PLUG WITH WET HANDS
Pulling or inserting the plug with wet hands may cause electric shock.
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may damage your
computer.
OTHERS
ERGONOMIC RECOMMENDATIONS
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room. For
optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches) away
from your eyes. When using the monitor over a prolonged time, a ten minute break every hour is
recommended as looking at the screen continuously can cause eye strain.
2
FOR YOUR SAFETY
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL NOTES ON LCD MONITORS
The following symptoms are normal with LCD monitors and do not indicate a problem.
NOTE
When you first turn on the LCD monitor, the picture may not fit in the display area
because of the type of computer that is used. In this case, adjust the picture position to
its correct position.
n
Due to the nature of the backlight, the screen may flicker during initial use. Turn off the
Power Switch and then turn it on again to make sure the flicker disappears.
You may find slightly uneven brightness on the screen depending on the desktop pattern
you use.
n
n
n
Due to the nature of the LCD screen, an afterimage of the previous screen may remain
after switching the image, when the same image is displayed for hours. In this case, the
screen is recovered slowly by changing the image or turning off the Power Switch for
hours.
n Contact your dealer or iiyama service center for the backlight replacement when the
screen is dark, flickering or not lighting up. Never attempt to replace it by yourself.
CUSTOMER SERVICE
n
The fluorescent light used in the LCD monitor may have to be periodically replaced. For
NOTE
the warranty coverage on this component, please check with local iiyama service center.
If you have to return your unit for service and the original packaging has been discarded,
please contact your dealer or iiyama service center for advice or replacement packaging.
n
CLEANING
WARNING
If you drop any materials or liquids such as water into the monitor when cleaning, unplug
n
the power cable immediately and contact your dealer or iiyama service center.
CAUTION
NOTE
n For safety reasons, turn off the power switch and unplug the monitor before you clean it.
To protect the LCD panel, do not scratch or rub the screen with a hard object.
n
n
Never use any of the following strong solvents. These will damage the cabinet and the
LCD screen.
Spray-type cleaner
Wax
Thinner
Benzine
Acid or Alkaline solvent
Abrasive cleaner
Touching the cabinet with any product made from rubber or plastic for a long time may
cause degeneration or loss of paint on the cabinet.
n
CABINET
Stains can be removed with a cloth lightly moistened with a mild detergent solvent. Then
wipe the cabinet with a soft dry cloth.
LCD
Periodic cleaning with a soft dry cloth is recommended.
SCREEN
Don't use tissue paper etc. because these will damage the LCD screen.
FOR YOUR SAFETY
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU OPERATE THE MONITOR
Please remove the stopper pin on the back of the stand before you install the monitor.
Careful attention is required as the monitor is sprung loaded and may expand quickly
when removing it.
FEATURES
K 52.8cm (20.8") TFT Color LCD Monitor
K Supports Resolutions up to 2048 × 1536 (QXGA)
K Super Wide Viewing Angle and High Resolution
K Digital Character Smoothing
Stopper pin
K Automatic Set-up
K Plug & Play VESA DDC2B Compliant
®
Windows 95/98/2000/Me/XP Compliant
K Power Management
K Ergonomic Design: MPR3 Approved
K Digital Input (DVI-I) for Clear Display
K 90° Panel Rotation Design
K VESA Standard (100mm×100mm) Compliant
CHECKING THE CONTENTS OF THE PACKAGE
The following accessories are included in your package. Check to see if they are enclosed with the monitor. If
anything is missing or damaged, please contact your local iiyama dealer or regional iiyama office.
1
n Power Cable*
n AC Adapter
2
3
n D-Sub Signal Cable MB32* , MB36*
2
3
n DVI-D Signal Cable DV65* , DV64*
n Cable Cover
n AC Adapter Holder
n Band
n Screw
n User Manual
1
* TO USERS IN 120V AREA
CAUTION
The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using a
power supply higher than this rating, then a power cable with a rating of 10A/250V must
be used.
2
* Accessory for AQ5311D
3
* Accessory for AQ5311D BK (Cabinet color: Black)
4
BEFORE YOU OPERATE THE MONITOR
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AND CONNECTORS
< Front >
< Back >
Power Indicator
A
Green: Normal operation
NOTE
Orange: Power Management
The monitor enters into power management mode which reduces the power
consumption to less than 13.5W when receiving no horizontal and/or vertical sync
signal.
Power Switch
Menu Button
B
C
D
E
F
G
/ Contrast Button
/ Brightness Button
Exit Button
Keyhole for Security Lock
You can fasten a security lock and cable to prevent the monitor from being removed without
your permission.
NOTE
H Connector for AC Adapter (DC-IN)
D-Sub mini 15pin Connector (ANALOG RGB)
DVI-I 29pin Connector (DVI)
I
J
BEFORE YOU OPERATE THE MONITOR
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTING YOUR MONITOR
Ensure that both the computer and the monitor are switched off.
A
B
Connect the computer to the monitor with the signal cable. (See page 21 for CONNECTOR PIN
ASSIGNMENT.)
Connect the AC Adapter to the Connector for AC Adapter of the monitor.
C
D
Connect the Power Cable to the AC Adapter first and then to the power supply.
NOTE n The signal cables used for connecting the computer and monitor vary by the type of computer
used. An incorrect connection may cause serious damage to both the monitor and the computer.
The cable supplied with the monitor is for a standard 15 pin D-Sub connector. If a special cable is
required please contact your local iiyama dealer or regional iiyama office.
n For connection to Macintosh computers, contact your local iiyama dealer or regional iiyama
office for a suitable adaptor.
n Make sure you tighten the finger screws at each end of the signal cable.
n Cables are connected easily by rotating the panel 90 degrees. (See page 9 for PANEL
ROTATION.)
n Cables can be bundled together inside the Cable Cover at the back of the stand. See next page
for cable wiring.
n AC Adapter can be fastened on the back of the monitor with the AC Adapter Holder. See next
page for AC Adapter installation.
[Example of Connection]
< Back >
to DVI connector
Power Cable (Accessory)
of computer
DVI-D Signal Cable
DV64/DV65 (Accessory)
to D-Sub connector
of computer
D-Sub Signal Cable
Computer
AC Adapter (Accessory)
MB32/MB36 (Accessory)
6
BEFORE YOU OPERATE THE MONITOR
Download from Www.Somanuals.com. All Manuals Search And Download.
[Cable Wiring]
Collect cables at the back of the stand.
A
B
Place the Cable Cover by inserting the tabs into
guide holes and then sliding the cover
downward.
[AC Adapter Installation]
Screw (Accessory)
Attach the AC Adapter Holder to the
AC Adapter.
A
B
Cavity
Place the AC Adapter Holder by
inserting the tabs into the cavities
on the back of the monitor.
Tighten the Screw to fasten the AC
Adapter Holder.
C
D
AC Adapter Holder
(Accessory)
AC Adapter
(Accessory)
Bundle up the adapter cable with the
Band.
Push to loosen
the Band.
Band (Accessory)
BEFORE YOU OPERATE THE MONITOR
7
Download from Www.Somanuals.com. All Manuals Search And Download.
COMPUTER SETTING
n Signal Timing
When you connect the monitor to the computer for the first time, set the signal timing of the computer to
VGA before connection. Change to the desired signal timings listed on page 20 in COMPLIANT TIMING,
after you confirm that the picture appears normally at VGA.
n Windows 95/98/2000/Me/XP Plug & Play
The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs on
Windows 95/98/2000/Me/XP by connecting the monitor to DDC2B compliant computer with the Signal
Cable supplied. Windows 95/98/2000/Me/XP Monitor Information File for iiyama monitors may be
necessary for your computer and obtained via the Internet, using the address:
NOTE n For additional information on how to download the driver for your monitor, please
access one of the internet sites noted above.
n Monitor Drivers are not required in most cases for Macintosh or Unix operating systems.
For further information, please contact your computer dealer first for advice.
8
BEFORE YOU OPERATE THE MONITOR
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTING THE HEIGHT AND THE VIEWING ANGLE
n For optimal viewing it is recommended to look at
the full face of the monitor, then adjust the monitor’s
height and angle to your own preference.
n Hold the panel so that the monitor does not topple
when you change the monitor’s height or angle.
n You are able to adjust the monitor’s height up to
110mm
110 mm, angle up to 35 degrees right and left, 35
degrees upward.
35˚
NOTE n Do not touch the LCD screen when you
change the height or the angle. It may
cause damage or break the LCD screen.
n Careful attention is required not to catch
your fingers or hands when you change
the height or the angle.
35˚
35˚
PANEL ROTATION
Adjust the monitor’s height to the maximum.
Rotate the panel 90 degrees.
A
B
Portrait: Turn clockwise.
Landscape: Turn counter clockwise.
NOTE Attempting to rotate without fully
extending upward may cause damage
to stand.
90˚
Adjust the monitor’s angle to your preference.
C
BEFORE YOU OPERATE THE MONITOR
9
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT
TIMING shown on page 20. You are also able to adjust the picture by following the button operation shown
below. For more detailed adjustments, see page 14 for SCREEN ADJUSTMENTS.
Press the Menu Button to start the On Screen Display feature. Move the cursor
(
by using the
/
Buttons.
Select the adjustment icon relating to the adjustment you want to make by
B
using the
Use the
/
Buttons. Press the Menu Button again.
/
Buttons to make the appropriate adjustment or setting.
C
D
Press the Exit Button to return to the previous display. Any changes are
automatically saved in the memory.
Adjustment icon
Adjustment menu item
presently selected
NOTE
n The On Screen Display disappears in optional setting seconds after you stop pressing the buttons
while performing an adjustment. (See pages 12 and 13 for OSD TIME.)
n
Any changes are automatically saved in the memory when the On Screen Display disappears. Turning
off the power should be avoided while using the Menu.
n
Adjustments for FINE, COARSE and POSITION are saved for each signal timing. Except for these
adjustments, all other adjustments have only one setting which applies to all signal timings.
10 OPERATING THE MONITOR
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTMENT MENU CONTENTS
Direct
You can skip the Menu display and perform an adjustment immediately by using the following
button operations.
l Brightness:
l Contrast:
Press the Brightness Button when the Menu is not displayed.
Press the Contrast Button when the Menu is not displayed.
l Automatic set-up:
Press the
and Buttons at the same time when the Menu is not displayed.
Analog / DVI-Analog Input
Adjustment Item
Problem / Option
Button to Press
Too dark
1
Direct
BRIGHTNESS *
CONTRAST
Too bright
Too dull
Direct
Too intense
2
AUTO *
Adjust FINE, COARSE, H-POSITION and V-
POSITION automatically.
IMAGE SET-UP
Direct
MANUAL
FINE
To correct flickering text or lines
COARSE
PRESET1
PRESET2
PRESET3
9300K
6500K
5500K
COLOR
USER
MODE
RED
Too weak
GREEN
BLUE
Too strong
H-POS
V-POS
Too far to the left
Too far to the right
OSD POSITION
Too low
Too high
Select the Analog RGB input.
Select the DVI-Analog input.
Select the DVI-Digital input.
ANALOG
INPUT SELECTION
DVI-ANALOG
DVI-DIGITAL
1
*
Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright.
See page 14 for SCREENADJUSTMENTS.
2
*
OPERATING THE MONITOR 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjustment Item
H-POSITION
Problem / Option
Too far to the left
Button to Press
Too far to the right
Too low
Too high
V-POSITION
IMAGE SIZE *
LANGUAGE
NORMAL
The picture is displayed at the optimum resolution.
Stretch the picture to fit the full screen.
3
EXPANDED
ENGLISH
English
French
FRANCAIS
DEUTSCH
ITALIANO
ESPANOL
JAPANESE
German
Italian
Spanish
Japanese
You can set the OSD display duration time
between 5 and 60 seconds.
OSD TIME
The model name, year of manufacture, the
current horizontal scan frequency and vertical
refresh rate are displayed.
INFORMATION
3
*
Main Menu does not appear on the screen if you press the Menu Button while you select NORMAL at
resolution of less than XGA (1024×768). Select EXPANDED temporarily to display the Main Menu.
12 OPERATING THE MONITOR
Download from Www.Somanuals.com. All Manuals Search And Download.
DVI-Digital Input
Adjustment Item
Problem / Option
Button to Press
Too dark
1
Direct
BRIGHTNESS *
CONTRAST
COLOR
Too bright
Too dull
Direct
Too intense
PRESET1
PRESET2
PRESET3
9300K
6500K
5500K
USER
MODE
RED
Too weak
Too strong
GREEN
BLUE
H-POS
V-POS
Too far to the left
OSD POSITION
Too far to the right
Too low
Too high
ANALOG
Select the Analog RGB input.
Select the DVI-Analog input.
Select the DVI-Digital input.
INPUT SELECTION
DVI-ANALOG
DVI-DIGITAL
NORMAL
The picture is displayed at the optimum resolution.
Stretch the picture to fit the full screen.
2
IMAGE SIZE *
EXPANDED
ENGLISH
English
French
German
Italian
LANGUAGE
FRANCAIS
DEUTSCH
ITALIANO
ESPANOL
JAPANESE
Spanish
Japanese
You can set the OSD display duration time
between 5 and 60 seconds.
OSD TIME
The model name, year of manufacture, the current
horizontal scan frequency and vertical refresh
rate are displayed.
INFORMATION
1
*
Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright.
Main Menu does not appear on the screen if you press the Menu Button while you select NORMAL at
resolution of less than XGA (1024×768). Select EXPANDED temporarily to display the Main Menu.
2
*
OPERATING THE MONITOR 13
Download from Www.Somanuals.com. All Manuals Search And Download.
SCREEN ADJUSTMENTS
Adjust the image by following the procedure below to get the desired picture when selecting Analog input.
n The screen adjustments described in this manual are designed to set image position and minimize flicker
or blur for the particular computer in use. They are unlike the adjustments you would make on a CRT
monitor.
n The monitor is designed to provide the best performance at resolution of 2048 × 1536, but can not provide
the best at resolutions of less than 2048 × 1536 because the picture is automatically stretched to fit the
full screen or displayed at optimum resolution. It is recommended to operate at resolution of 2048 × 1536
in normal use.
n Displayed text or lines will be blurred or irregular in thickness when the picture is stretched due to the
screen enlargement process.
n It is preferable to adjust the image position and frequency with the monitor controls, rather than the
computer software or utilities.
n Perform adjustments after a warm-up period of at least thirty minutes.
n Additional adjustments may be required after the Automatic set-up depending on the resolution or signal
timing.
n The Automatic set-up may not work correctly when displaying the picture other than the Test.bmp
(screen adjustment pattern). In this case, manual adjustments are required.
There are two ways to adjust the screen. One way is automatic adjustment for FINE, COARSE and
POSITION. Another way is performing each adjustment manually.
Perform the Automatic set-up first when the monitor is connected to a new computer, or resolution is
changed. If the screen has a flicker or blur, or the picture does not fit in the display area after performing
the Automatic set-up, manual adjustments are required. Both adjustments should be made by using the
screen adjustment pattern (Test.bmp) obtained via the iiyama web site (http://www.iiyama.com or http:/
/www.iiyama.co.uk).
This manual explains adjustment under Windows 95/98/2000/Me/XP.
Set the IMAGE SIZE feature to NORMAL and display the picture at the optimum resolution.
Enter the Test.bmp (screen adjustment pattern) to wallpaper.
A
B
NOTE n Consult the appropriate documentation for doing this.
n Test.bmp is made at resolution of 2048 × 1536. Set the display position to center in the
®
wallpaper setting dialogue box. If you use Microsoft PLUS! 95/98 cancel the setting of
“Stretch desktop wallpaper to fit the screen”.
[Adjustment pattern]
Color bar
Zebra pattern
Picture frame
This is the image
displayed at 2048 × 1536.
14 OPERATING THE MONITOR
Download from Www.Somanuals.com. All Manuals Search And Download.
Select AUTO in IMAGE SET-UP and perform the Automatic set-up.
C
Or press the
and
Buttons at the same time when the Menu is not displayed.
(Direct adjustment)
Adjust the image manually by following procedure below when the screen has a flicker or
blur, or the picture does not fit in the display area after performing the Automatic set-up.
D
E
Adjust the V-POSITION so that the top and bottom of the picture frame will fit to the
display area.
1) Adjust the H-POSITION so that the left side of the picture frame will move to the left
edge of the display area.
F
2) Stretch the right side of the picture frame to the right edge of the display area by
adjusting the COARSE in IMAGE SET-UP.
NOTE n When the left side of the picture frame moves apart from the left edge of the display area
during the COARSE adjustment, adjust steps 1) and 2).
n Another way to make the COARSE adjustment is to correct the vertical wavy lines in the
zebra pattern.
n The picture may flicker during the COARSE, H-POSITION and V-POSITION adjustment.
n In case the picture frame is bigger or smaller than the data display area after the COARSE
adjustment, repeat steps from
.
C
OPERATING THE MONITOR 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjust the FINE in IMAGE SET-UP to correct horizontal wavy noise, flicker or blur in the
zebra pattern.
G
NOTE n In case the strong flicker or blurs remain on a part of the screen, repeat steps
and
F
G
because the COARSE may not be adjusted correctly. If the flicker or blurs still remain, set
the refresh rate of computer to low (60Hz) and repeat steps from again.
C
n Adjust the H-POSITION after the FINE adjustment if the horizontal position moves during the
adjustment.
Adjust the BRIGHTNESS and COLOR to get the desired picture after you complete the FINE
and COARSE adjustments.
H
Put back your favorite wallpaper.
16 OPERATING THE MONITOR
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER MANAGEMENT FEATURE
The power management feature of this product automatically reduces unnecessary power consumption
of the monitor when your computer is not in use.
To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There is a
power management step the monitor takes as described below. The power management function, including
any timer settings is configured by the operating system. Check your operating system manual for
information on how this can be configured.
Power Management Mode
n
When the H-sync signal / V-sync signal / H and V sync signals from the computer are off, the monitor
enters into Power Management Mode which reduces the power consumption to less than 13.5W. The
screen becomes dark, and the power indicator turns to orange. From Power Management Mode, the
image reappears in several seconds when either the keyboard or the mouse are touched again.
Power Indicator
NORMAL MODE
Green
POWER MANAGEMENT MODE
Orange
POWER
0
13.5 W
100%
CONSUMPTION
Even when using the power management mode, the monitor consumes electricity. Turn off
the Power Switch whenever the monitor is not in use, during the night and weekends, to
avoid unnecessary power consumption.
NOTE
n
n
It is possible that the video signal from the computer may be on while the H or V sync signal
is missing. In this instance, the POWER MANAGEMENT feature may not work properly.
OPERATING THE MONITOR 17
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING
If the monitor fails to operate correctly, please follow the steps below for a possible solution.
1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have.
2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE
MONITOR or if the problem persists.
3.
If you are experiencing a problem which is not described below or you cannot correct the problem,
discontinue using the monitor and contact your dealer or iiyama service center for further assistance.
Problem
Check
The picture does
not appear.
A
(Power indicator o The AC Adapter cable is firmly connected.
does not light up.) o The Power Cable is firmly seated in the socket.
o The Power Switch is turned ON.
o The AC socket is live. Please check with another piece of equipment.
(Power indicator o If the blank screen saver is in active mode, touch the keyboard or the mouse.
is green.)
o Increase the Contrast and/or Brightness.
The computer is ON.
o
o The Signal Cable is properly connected.
o The signal timing of the computer is within the specification of the monitor.
(Power indicator o If the monitor is in power management mode, touch the keyboard or the mouse.
o
If the input signal selection is different, switch the INPUT SELECTION.
The computer is ON.
is orange.)
o
o The Signal Cable is properly connected.
o
The signal timing of the computer is within the specification of the monitor.
The screen is not o The Signal Cable is properly connected.
B
C
D
E
synchronized.
o The signal timing of the computer is within the specification of the monitor.
o The video output level of the computer is within the specification of the monitor.
The screen
o The signal timing of the computer is within the specification of the monitor.
position is not in
the center.
The screen is
too bright or too
dark.
o The video output level of the computer is within the specification of the monitor.
o The power voltage is within the specification of the monitor.
o The signal timing of the computer is within the specification of the monitor.
The screen is
shaking.
18 TROUBLE SHOOTING
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
SPECIFICATIONS
LCD
Driving system
Size
TFT
Panel
Diagonal: 52.8cm / 20.8"
0.207mm H × 0.207mm V
Pixel pitch
2
Brightness
235cd/m (Typical)
Contrast ratio
Viewable angle
Response time
300 : 1 (Typical)
Right / Left / Up / Down: 85 degrees each (Typical)
50ms typical, 68ms maximum (Black, white, black)
16,777,216 maximum
Display Colors
Sync Frequency
Dot Clock
Horizontal: 31.5-96.0kHz, Vertical: 60-75Hz
239MHz maximum
Maximum Resolution
Input Connector
2048 × 1536
D-Sub mini 15pin
DVI-I 29pin
TM
Plug & Play
VESA DDC2B
Input Sync Signal
Separate sync: TTL, Positive or Negative
Composite sync: TTL, Positive or Negative
Input Video Signal
Analog: 0.7Vp-p (Standard), 75Ω, Positive
Digital: DVI (Digital Visual Interface standard Rev.1.0) compliance
Maximum Screen Size
Power Source
423.9mm W × 318.0mm H / 16.7" W × 12.5" H
ACAdapter (Accessory): 100-230VAC, 50/60Hz, 2.5A (Output: 12VDC, 8.33A)
Monitor: 12VDC, 6.9A
Power Consumption
100W maximum
Power management mode: 13.5W maximum
Dimensions / Net Weight 472 × 419-529 × 241mm / 18.6 × 16.5-20.8 × 9.5" (W×H×D), 9.5kg / 20.9lbs
Tilt Angle
Right / Left: 35 degrees each, Up: 35 degrees
Environmental
Considerations
Operative temperature:
Storage temperature:
10 to 35°C / 50 to 95°F
-20 to 60°C / -4 to 140°F
Humidity (-20 to under 50°C / -4 to under 122°F) :
20 to 80% (No condensation)
Humidity (50 to 60°C / 122 to 140°F) : 20 to 55% (No condensation)
CE, TÜV-GS / MPR3(prEN50279) / ISO 13406-2,
Approvals
FCC-B, UL / C-UL, VCCI-B
APPENDIX 19
Download from Www.Somanuals.com. All Manuals Search And Download.
472mm/18.6"
425.4mm/16.7"
87mm/3.4"
344mm/13.5"
(
): Maximum adjustment range
COMPLIANT TIMING
Horizontal
Frequency
Vertical
Frequency
Video Mode
Dot Clock
1,2
2
DOS
640 × 350*
31.47kHz
31.47kHz
31.47kHz
37.86kHz
37.50kHz
37.88kHz
48.08kHz
46.86kHz
48.36kHz
56.48kHz
60.02kHz
67.50kHz
64.00kHz
80.00kHz
75.00kHz
87.50kHz
93.75kHz
35.00kHz
49.72kHz
60.24kHz
68.68kHz
61.84kHz
75.83kHz
81.18kHz
96.00kHz
70.00Hz
60.00Hz
70.08Hz
72.80Hz
75.00Hz
60.32Hz
72.19Hz
75.00Hz
60.00Hz
70.10Hz
75.00Hz
75.00Hz
60.00Hz
75.00Hz
60.00Hz
70.00Hz
75.00Hz
67.00Hz
74.55Hz
74.93Hz
75.06Hz
66.00Hz
71.53Hz
76.16Hz
60.00Hz
25.17MHz
25.18MHz
28.32MHz
31.50MHz
31.50MHz
40.00MHz
50.00MHz
49.50MHz
65.00MHz
75.00MHz
78.75MHz
108.00MHz
108.00MHz
135.00MHz
162.00MHz
189.00MHz
202.50MHz
30.24MHz
57.29MHz
80.00MHz
100.00MHz
94.50MHz
128.00MHz
135.09MHz
238.85MHz
640 × 480
720 × 400*
640 × 480
VESA
VGA
SVGA 800 × 600
XGA 1024 × 768
SXGA
1152 × 864
1280 × 1024
UXGA 1600 × 1200
Macintosh
SUN66
640 × 480
832 × 624
1024 × 768
1152 × 870
1152 × 900
SXGA 1280 × 1024
QXGA 2048 × 1536
1
NOTE
* The vertical screen size cannot be adjusted to the full screen.
2
* The screen is stretched vertically because the screen size ratio is not 4:3.
20 APPENDIX
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTOR PIN ASSIGNMENT
n D-Sub mini 15pin Connector
Pin
1
Input Signal
Red video
Pin
9
Input Signal
+5V
2
10 Ground
Green video
Blue video
11
12
13
14
15
3
Ground
4
Ground
Data line (SDA)*
H-Sync / HV-Sync
V-Sync
5
Ground
6
Red video ground
Green video ground
Blue video ground
7
Clock line (SCL)*
* Compliant to VESA DDC.
8
n DVI-I 29pin Connector
Pin
1
Input Signal
T.M.D.S Data 2–
T.M.D.S Data 2+
Pin
16
17
Input Signal
Hot Plug Detect
T.M.D.S Data 0–
C2
C4
C1
C3
1
9
8
16
24
2
3
18 T.M.D.S Data 0+
T.M.D.S Data 2/4 Ground
T.M.D.S Data 4–
17
C5
4
19 T.M.D.S Data 0/5 Ground
20 T.M.D.S Data 5–
DVI-I
T.M.D.S Data 4+
5
6
Clock line (SCL) *
21 T.M.D.S Data 5+
7
Data line (SDA) *
Analog V-Sync
22 T.M.D.S Clock Ground
T.M.D.S Clock +
T.M.D.S Clock –
8
23
24
9
T.M.D.S Data 1–
T.M.D.S Data 1+
10
11
12
13
14
15
C1 Analog Red
T.M.D.S Data 1/3 Ground
T.M.D.S Data 3–
T.M.D.S Data 3+
+5V Power
C2 Analog Green
C3
Analog Blue
C4 Analog H-Sync
C5 Analog Ground
* Compliant to VESA DDC.
Ground
APPENDIX 21
Download from Www.Somanuals.com. All Manuals Search And Download.
|