iMcV-PSE-MidSpan
Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
FCC Radio Frequency Interference Statement ........................................................ii
Warranty................................................................................................................ii
About the iMcV-PSE-MidSpan................................................................................1
Application Diagram ..............................................................................................1
Installation .............................................................................................................2
DIP Switch Settings ................................................................................................3
LED Indicators........................................................................................................4
Configuring the iMcV-PSE-MidSpan with iView².....................................................5
Installation Troubleshooting ...................................................................................5
Specifications.........................................................................................................6
IMC Networks Technical Support...........................................................................6
Electrostatic Discharge Precautions.........................................................................6
Safety Certifications................................................................................................8
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
About the iMcV-PSE-MidSpan
The iMcV-PSE-MidSpan is an SNMP-manageable, IEEE 802.3af Power over Ethernet
(PoE) Injector, used to supply current to a PoE-compliant PD (Powered Device). This
makes it the perfect solution when installing compliant PDs such as IP cameras, VoIP
phones and other end devices (i.e. the IE-MiniMc media converter) where there is no
power source in close proximity. The iMcV-PSE-MidSpan installs between a
switch/hub and the device requiring power, providing detection, classification and
power sourcing to the Powered Device (PD).
The iMcV-PSE-MidSpan has been designed specifically for use with the iMediaChassis
series as well as the unmanaged IE-Mediachassis series. Two RJ-45 ports are provided,
one for data and one for a combination of data and a Power over Ethernet (PoE)
supply.
Application Diagram
The following diagram shows how the iMcV-PSE-MidSpan would be used with an
iMediaChassis in a typical network:
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
The iMcV-PSE-MidSpan may be installed into the iMediaChassis series, the IE-
MediaChassis or MediaChassis series. Each module will occupy one-slot in the
chassis.
NOTE
Due to power limitations in iMediaCenter series chassis, the installation of a PSE-MidSpan into
an iMediaCenter chassis is highly discouraged and will void the PSE-MidSpan’s warranty.
It is not recommended that the iMcV-PSE-MidSpan module be installed in an IE-MediaChassis-
1/DC (850-33100). The power source in this chassis is not isolated, and cannot support
positive reference ground systems typically used in Telco environments; in addition it can not
provide enough power for the module.
To install a module, remove the blank brackets covering the slots (if present) where
the module is to be installed by removing the screws on the outside edges of the
bracket. Slide the module into the chassis, via the card guides, until the module is
seated securely in the connector. Secure the module to the chassis by tightening the
captive screw. Save any “blanks” removed during installation for future use should
configuration requirements change.
NOTE
A 20-slot iMediaChassis should support up to 11 PSE-MidSpans (with AC power) or 9 PSE-
MidSpans (with DC power). This limitation applies only to the 20-slot chassis.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
DIP Switch Settings
Feature
Switch
Function
Default
PoE ENA
S1
Enables PoE functionality
ON
Zero Current ENA
S2
0 current LED will glow red if
no device is connected to the
PSE-MidSpan or the PD device
is not valid
OFF
Classification ENA
Auto Restart
S3
S4
Determines what amount of
power the PD device is
drawing (4W, 7W or 15W)
OFF
OFF
Device will automatically
discover PD device should a
power failure occur
S5-S8 are OFF; Factory default, do not change
3
Download from Www.Somanuals.com. All Manuals Search And Download.
LED Indicators
The iMcV-PSE-MidSpan features device-specific and several diagnostic LEDs. The
LED functions are as follows:
PWR FAIL
Glows red when an overcurrent or internal fault
is detected within the PSE-MidSpan PoE circuit.
Glows red when an overcurrent condition lasts
for more than 60 ms after power up and/or
glows red when an over temperature condition
occurs.
OVER CUR
Glows green when power is being supplied to
the PSE-MidSpan.
PWR
Glows red when there is no device connected
to the PSE-MidSpan. Glows red when the
device connected to the PSE-MidSpan is NOT a
valid PD. The LED is off when the PSE-
MidSpan detects a valid PD.
0 CUR
Glows green when PoE functionality is enabled.
PoE ENB
15 W
Glows green when Powered Device consumes
12.95 watts to 15 watts of power (CLASS0 PD).
Glows green when Powered Device consumes
3.84 watts to 4 watts of power (CLASS1 PD).
4W
7W
Glows green when Powered Device consumes
6.49 watts to 7 watts of power (CLASS2 PD).
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring the iMcV-PSE-MidSpan with iView²
The PSE-MidSpan, when installed in a managed chassis, is configurable through
iView² software. To configure the PSE-MidSpan, open the iView2 software and select
the chassis in which the PSE-MidSpan has been installed. When Auto Discovery
detects the chassis and identifies the PSE-MidSpan, select it to configure or monitor
the modules. Software settings always override hardware settings, so DIP Switch
settings should be set to match the configuration in the Graphic User Interface
(GUI).
The screen that appears will show the PSE-MidSpan’s LEDs and settings. The LEDs
appear on the left, showing the LEDs as they are displayed on the PSE-MidSpan. The
settings, on the right, appear as follows:
Module Number
Module Type
This displays the slot number in which the PSE-MidSpan has
been installed.
This space displays the type of module inserted in this slot.
The PSE-MidSpan will appear with the name “iMcV
MidSpan”.
Data Port
Use this field to enter a name for the device connected to
the Data Port. Click the Save Changes button to save this
name.
POE Data Port
Enter a name for the device connected to this port in the
Description field. Then, enable or disable the POE function
from the drop-down menu beneath. Click the Save
Changes button to save this information to iView².
Installation Troubleshooting
•
0 (Zero) Current LED will glow red when the PSE module is either not
connected to a PD device or an over current condition occurs. Be sure
the iMcV-MidSpan is connected to a valid PD device.
•
In a 20-slot iMediaChassis-AC, the number of modules cannot exceed
11. Overloading the chassis with more than 11 can overload and
possibly damage the chassis.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Physical Specifications
Dimensions: 4.19” x .78” x 2.75”
(106.4mm x 19.81mm x 69.85mm)
Environmental
Operating Temperature: 32° - 122° F (0° - 50° C)
Storage Temperature:
0° - 160° F (-20° - 70° C)
Humidity:
5 - 95% (non-condensing)
Power
Power Input (Maximum): 3.2A@5VDC
Power Output: 0.3A @ 48 VDC
IMC Networks Technical Support
Tel: (949) 465-3000 or (800) 624-1070 (in the U.S. and Canada);
+32-16-550880 (Europe)
Fax: (949) 465-3020
E-Mail: [email protected]
Web: www.imcnetworks.com
Electrostatic Discharge Precautions
Electrostatic discharge (ESD) can cause damage to any product, add-in modules or
stand alone units, containing electronic components. Always observe the following
precautions when installing or handling these kinds of products
1. Do not remove unit from its protective packaging until ready to install.
2. Wear an ESD wrist grounding strap before handling any module or component.
If the wrist strap is not available, maintain grounded contact with the system unit
throughout any procedure requiring ESD protection.
3. Hold the units by the edges; do not touch the electronic components or gold
connectors.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
4. After removal, always place the boards on a grounded, static-free surface, ESD
pad or in a proper ESD bag. Do not slide the modules or stand alone units over
any surface.
WARNING! Integrated circuits and fiber optic components are
extremely susceptible to electrostatic discharge damage. Do not
handle these components directly unless you are a qualified
service technician and use tools and techniques that conform to
accepted industry practices.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Certifications
CE: The products described herein comply with the Council Directive
on Electromagnetic Compatibility (2006/108/EC). For further details,
contact IMC Networks.
European Directive 2002/96/EC (WEEE) requires that any equipment that bears this
symbol on product or packaging must not be disposed of with unsorted municipal
waste. This symbol indicates that the equipment should be disposed of separately
from regular household waste. It is the consumer’s responsibility to dispose of this
and all equipment so marked through designated collection facilities appointed by
government or local authorities. Following these steps through proper disposal and
recycling will help prevent potential negative consequences to the environment and
human health. For more detailed information about proper disposal, please contact
local authorities, waste disposal services, or the point of purchase for this equipment.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
19772 Pauling • Foothill Ranch, CA 92610-2611 USA
TEL: (949) 465-3000 • FAX: (949) 465-3020
© 2009 IMC Networks. All rights reserved.
The information in this document is subject to change without notice. IMC Networks assumes no responsibility for any
errors that may appear in this document. iMcV-PSE-MidSpan is a trademark of IMC Networks. Other brands or product
names may be trademarks and are the property of their respective companies.
Document Number 57-80910-00 A3
August 2009
Download from Www.Somanuals.com. All Manuals Search And Download.
|