Fully Automatic Washing Machine
Operation Manual
MODEL: AW60-806
Download from Www.Somanuals.com. All Manuals Search And Download.
NAMES OF RESPECTIVE PARTS AND SIMPLE INSTALLATION
SIMPLE INSTALLATION
Names of respective parts
3.
4.
Use gradienter to check whether the washine machine is place flat.
After the adjustment the fixing pole should be screwed back and tight.
Notices:
If the washing machine is not placed flat (the inclination angle is over 2o), it may cause great
vibration or automatic check and rectification or other abnormal circumstances will often take place in
the course of spinning.
All foam packing including the fixing frame on the base foam in the step 2.
XQ
B5
5-8
09
G
Base foam Fixing frame
2
1
30
5.
5
k
g
Adjustable foot
Loose
9
Screw in
Fixing pole
8
Tight
Screw out
Bukly objects
7
Step 4:
Installation of the water inlet hose
1. Check the tap mouth.If it is not even,it can be filed even.
2.Loosen the locking ring slightly , Screw the four screws into universal
connector at the same distance.
3. Put the tap deeply into the universal connector then screw in the screws.
4. Screw tight the locking ring clockwise at the most.
5. Pull the skirt of one end of the water inlet hose downwards, and then plug in
1. Top lid
2.Operation panel
6.Top frame
3.Adjustable leg
4.Cabinet
5. Drain hose
7.Pulsator 8.Lint filter
9.Inner tub
the universal connector. Asound of
KA-TA means proper connection.
Tap
File
Simple installation
Locking ring
If the calibre of the tap
is big, the connecting
ring can be taken off.
Connecting ring
Step 1:
The washing machine should be placed inside the room with a flat floor, which is
convenient for water supply and drain, has low moisture and no direct sunshine, and
does not freeze in winter.
Step 2:
Step 3:
All foam packing (including the fixing frame on the base foam) should be taken off,
otherwise the washing machine will not work.
Please adjust the washing machine even according to the instructions below to make
the washing machine run steadily in low noise.
Skirt
1.Loose the fixing pole on the adjusting foot, screw in or screw out the adjusting foot
to make the four feet placed even on the floor.
2. When the floor is slanting or uneven, it is not easy to make even only by the
adjusting foot. Then the rubber band can be added to the un-flat place.
Download from Www.Somanuals.com. All Manuals Search And Download.
SIMPLE INSTALLATION
SIMPLE INSTALLATION AND SIMPLE OPERATION
Step 6:
Power source and grounding
The washing machine employs alternative current with the rated voltage and frequency. When
Notices:
After installation, do not start the washing machine in haste. First open the tap to let the
the voltage fluctuates between 10% of rated voltage, the washing machine can work normally.
A
water press into the water inlet hose to check whether there is any leakage in the connectors
on the both ends. When the pressure is too high, please shut the tap a little to avoid water
special power socket for the washing machine had better be set beside the washing machine for
convenience and safety. The method of connection of the socket is as the figure below:
leakage.
The method of installation for the double water inlet hose is same.
Notices:
The socket and the grounding wire must be installed
by an electrician to prevent incorrect installation or use of
Grounding wire
Rated voltage
~
the socket, and to guarantee the safety of use of
electricity.
Cabinet
Step 5:
Installation of the drain hose
Inner hose
The power wire of the washing machine employs Y
connection and the replacement of the power wire
should be carried out by professionals.
1. Nip the fixing ring with hand to make it loose
and engaged on the drain hose and put the
drain hose into the leading skirt of drain hose in
the bottom of the washing machine to the end
at the most (soak the head of the drain hose in
warm water, it will make the engagement easy),
and loose the fixing ring to let it clasp the drain
hose.
Fixing ring
No connection of the grounding wire with the neutral
wire, otherwise the cabinet will be charged, which is
likely to cause the danger of electric shock.
Drain hose
Installation of the base cover
Step 7:
Leading ring
1. Slant the washing machine with angle of 45oin the direction of
the arrows showed in the figure, put the side with the clasper to
the washing machine and the other side to the ground, insert base
cover along the direction of the upper slot of the base from the
back side of the washing machine.
2. It had better put the outlet of the drain hose into the nearby drainage permanently, which
can save the trouble that the drain hose has to be connected each time before use. If the
drainage is far from the washing machine, it can be solved by connection of the drain hoses
head with end to extend.
Slot
Base cover
2. Put the base cover straight to the point and then press the base
cover upward till there is a sound of "Gaba" and then screw in
a self-tapping screw(without the self-tapping screw for plastic
cabinet).
Hole for Self-tapping screw
Simple operation
Preparations before using:
1. Hang the drain hose up, the high is about 1 m.
2. Connect the water inlet hose and open the tap.
3. Put the power plug into the socket.
4. Take out the coins and other sundries and shake off the mud and sand on the clothes.
5. Determine water level. Press "Water level" button to select the water level.
6. Press "Power" switch button.
7. Press "Start/Pause" button. The washing machine will go into operation by the automatic program of standard.
Notices:
If you want to set other programs, please see and read "Full automatic program" and "Self-program".
According to your needs, select corresponding programs for your service.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROL PANEL DESIGN
FULLY AUTOMATIC PROGRAM
CONTROL PANELDESIGN
AW60-806
Water level
Press water level button, the user can set
water level freely..
Fully Automatic Washer
Press the button,you can choose
air-dry time freely.
Wool programe can select 10-16 level
You also can select tub-clean.
Rapid programe can select 1-10 level.
Others can select 1-16level freely.
6.0
EF
Press the button,youcan
select single EF programe
or combine EF programe.
Selection of function
Preset
Press the button to select
Press the button to preset delay time.
Less than 24 hours,each press of the
button,the delay time is added by an
hour.For more than 24 hours,each
press of the button,the delay time
is added by 6 hours.After 48 hours,
the preset indicator comes back to
original status.If the button is kept
pressed,the delay time will
"WASH"+"RINSE"+"SPIN",
"SOAK"+"WASH"+"RINSE"+"SPIN",
"WASH","WASH"+"RINSE",
"RINSE"+"SPIN","SPIN".
Light/Flash
Fuzzy
Last time
Child
Normal
Rapid
Power
On & off power
Delicate
Bulky
Automatic power off
automatically change.
Wool
Child Lock
Start/Pause
Please read "Additional explanation".
Program
Program
By washing requirement you may
optional select the programs of
"NORMAL(light)/"FUZZY"(flash),
"RAPID(light)/"LAST TIME"(flash)
"DELICATE"(light)/"CHILD(flash)
"BULKY"(light)/"WOOL"(flash)
After program
selection, press the
button to start.
Press the buttonto
pause in thecourse of
operation, press the
button again the
POWER
program continues till
the program isfinished.
START
PAUSE
REMAINING TIME
Energy Saving
2 Hr.
1 Hr.
Soak
Wash
Water Saving
PRESET
(HOURS)
Quiet Operation
Rinse
30 Min
PRESET
WATER LEVEL
AIR-DRY
EF
FUNCTION
Rinse Hold
Spin
Tub dry
CHILD LOCK
In order to protect controller, the interval of switching on and off power
should be more than 30 seconds.
If drawing is changed, no inform any more.
!
r
Download from Www.Somanuals.com. All Manuals Search And Download.
WAY OF USE
WAY OF USE
Preparations before using
Fully automatic program
There are eight fully automatic programs that can automatically complete the whole courses
of "Wash","Rinse","Spin",and features and usage of each process and the method of use are
as below: (preparations before use are the same as the above-mentioned preparations).
1. Hang the drain hose.
2. Connect the water inlet hose. The loading and unloading method of the water inlet hose can be seen in page 3~4.
3. Connect the power..
4. Take out the coins and other sundries and shake off the mud and sand on the clothes.
Washing
Rinse / Rinse light flashes
Rinse for the second time
Spinning/Spinning
light flashes
Total
time
Program
Way of use
Feature and usage
Wash light flashes
Rinse for the third time
Rinse for the first time
Powerful in washing and
Step1-step4 is same with usual
program.
Normal
Spinning for
3 minutes
Washing for
Spinning for
3 minutes
Spinning for
6 minutes
Washing for
4 minutes
About
Washing for 12 minutes
widely applicable, especially
in spring, autumn and winter.
3 minutes
41 minutes
program
Step5: Press button "Power", switch
on, all lights flash three times.
Washing time is short and
applicable for small volume,
not more than 3.5Kg, and the
degree of stain of the clothes
is light.
Spinning for
1 minutes
Rapid
Spinning for
2 minutes
About
Washing for
2 minutes
Step6: Press any button of "Normal",
"Delicate" , "Rapid", "Soak", "Child
clothes", "Heavy wash", "Bulky",
"Anti-crease" to select the program
Washing for 3 minutes
and soak 30
seconds with
spraying
10 minutes
program
s
you want and the corresponding light
is on.
Washing intensity is high and
spinning time is long, water
level is high.
Spinning for
6 minutes
Bulky
About
Spinning for
4 minutes
Washing for
Washing for
3 minutes
Washing for
3 minutes
Spinning for
3 minutes
Spinning for
3 minutes
Soaking for 20 minutes
Washing for 15 minutes
74 minutes
program
4 minutes
Step7: Press button "Start/Pause", the
washing machine will be started. Press
again during the process of running
the washer will be paused.
The times for rinse is much, and
the water level is high, so it can
rinse the clothes clearly, avoiding
the remaining detergent in the
clothes which hurts the skin of
children.
Soaking for 20 minutes
Washing for 15 minutes
Child s clothes
program
Spinning for
6 minutes
About
Spinning for
3 minutes
Washing for
4 minutes
Washing for
4 minutes
Spinning for
3 minutes
Spinning for
3 minutes
Washing for
4 minutes
74 minutes
Spinning for
6 minutes
Fuzzy
About
Spinning for
3 minutes
Washing for
4 minutes
Spinning for
3 minutes
Washing for
4 minutes
Washing for 12 minutes
Washing for 12 minutes
Auto select washing intensity.
41 minutes
program
Water flow is soft, applicable
for delicate clothes such as
silk clothes.
Delicate
program
Spinning for
2 minutes
Washing for
4 minutes
Spinning for
2 minutes
About
Washing for
4 minutes
Spinning for
37 minutes
2 minutes
2
Wool
Spinning for
3 minutes
About
Washing for
4 minutes
Spinning for
3 minutes
Washing for
4 minutes
Soaking for 20 minutes
Washing for 15 minutes
Be fit for washing wool
58 minutes
program
Start at last time programe
you choose.
Last time
program
*
9
10
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION METHOD
OPERATION METHOD
Button operation steps
Cancel the preset, or alter the preset time
1.This washng machine has many extended functions, please operate it as per the
below steps. Some of the functons of this washing machine if you don't want to operate,
you only need to do is to skip it.
Before the program is started , the preset indicator lights, the preset time is selected
from 1 to 48 hours,afer the preset time is set over 48 hours, the preset indicator is turned
off , the function will be cancelled.
1.Operate the above mentioned steps range from "1" to "5".
2.Pressing program button to select the relevant programs that you choose to operate.
3.When choose delicate,fuzzy,last time,wool,the other functions can not be altered.
4.Pressing EF button to select the EF function.( Details of this function please refers to
the EF operation steps).
5.Pressing water level buttom to select the appropriate water levels.
6.Pressing delay button to set the delay time.( Details of this function please refers to
the delay operation steps).
Press power switch to end program, and to cancel preset function at the same time.
To change the preset time, please press "Power , and then press "Preset"
button to re-preset.
7.Pressing "START/PAUSE' button to start the machine with the provision that the
power is on, then close the top cover of the machine itself.
Child-lock function
EF PROGRAME
Child-lock function: after power-on of the machine, press of both "water level" and
"preset " buttons means start of "child-lock" function. Then all functions are not
accessible. Digital display shows "CL" every five seconds. Press again,both
"Water level" and "Preset " to disable "Child-lock" function
1
When "normal" program is selected, then"rinse" or"washing"are chosen at the same time, it is
better to chose "energy saving" function.
"Water saving" can be used to reduce rinse times when there is more than one time of rinse,
rinse times would be reduced by one time, at the same time, one time of spray is added.
"Rinse hold"function is recommended to be chosen together with "spin". The washers buzzing
2
3
sound. Will remind you of recycling water at the last time of spin.
4. "Water saving" and "rinse hold" are not achievable at the same time.
Soak wash
1. Switch on the power, open the tap and lay down the drain hose.
2. Put in the washing and detergent, close the lid.
3. Select proper water level and programs according to the weight of clothes
and the clothes's varieties.
4. Press the "FUNCTION" button, select "SOAK", the lights of "SOAK" "WASH"
"RINSE""SPIN" will get turned on.
5. Press "START/PAUSE" button.
Preset program
Preset time means the beginning time of washing.
1. Switch on "Power" button.
2. Open the tap and lay down the drain hose.
3. Load laundry and put detergent.
4. Select the proper water level according to the quantity of clothes.
5. Select the functions and programs.
6. Press "Preset" button to select the beginning time of washing.
7. Press "Start/Pause" button and close the lid.
AIR DRY
The function isto dry clothesby air.The efficiency of air dry isabout 60%,and
suggest 50% loadin the tubfor drying.
Confirmation of the preset and inspection
After the preset is started, the corresponding light will be turned on, and other lights are
turned off.
After the preset is started, press "Preset" button continuously, you may see the selected
programs an the rest of the preset time. Loosen the button, the program will automatically come
back to preset status.
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION METHOD
OPERATION METHOD
Load size and the detergent
Wash of blanket
Water
level
Water
volume
Weight of
washing
Washing powder
The weight of blanket should be less than 4kg, and please select the bulky program for
washing.
Steps:
1. Dissolve the detergent with proper amount of warm water (below 50?), then pour it into the
<5.5kg
<4.8kg
<4.2kg
<3.6kg
<3.0kg
<2.4kg
<1.8kg
About 53g
About 48g
About 43g
About 37g
About 32g
About 27g
About 21g
About 16g
About 48L-50L
About 46L-48L
15-16
13-14
11-12
9-10
washing machine.
About 44L-46L
About 42L-44L
About 39L-42L
About 36L-39L
About 33L-36L
About 30L-33L
2. Fold up the blanket as the method showed in the figures below and put it into the washing
tub.
7-8
5-6
3. Switch on the power and press the "Program" button to select the "Bulky" program and
"High" or "Medium" water level.
4. Press the "Start/Pause" button, and c lose the lid.
5. After the end of washing, put it to clothes line for sunshine . Make sure that the blanket is
flat and free of wrinkle.
3-4
1-2
<1.2kg
Notices:
The highest priority of using the detergent is low and mid foam detergent.
The volume of detergent is changed with different type. You need read its user manual.
Water volume is different because of clothes variety. When the washing machine runs not
well, please adjust clothes volume and water level.
Notices:
Only the blanket with marks "Hand wash" is washable.
The water volume above listed is based on normal clothes volume.
Weight standard of the clothes
Fold in two by the long side
Fold three times in the
s a m e d i r e c t i o n
Roll up the blanket.
Put it into the wash tub with
the edge downwards
Use the cleaning solution for twice
1. Put in the washing in the first batch and detergent and press "Wash" or "Function"
button to set the Single "wash" to run.
Long sleeves shirt
(blended) about 200g
Short sleeves shirt
(cotton) about 130g
Union suit including coat and
trousers(blended) about 800g
Pyjamas including coat and
trousers (cotton) about 500g
2. Take out the washing in the first batch after hearing the buzzing sound.
3. Put in the washing in the second batch, and run "Wash","Rinse","Spin".
4. Take out the washing in the second batch after hearing the buzzing sound.
5. Put in the washing in the first batch and press "Function" button to run "Rinse" and
"Spin".
Bedsheet (cotton)
about 500g
Bath towel (cotton)
about 300g
Trunks (cotton)
about 50g
Socks (blended)
about 50g
Pre-wash of dirty clothes
One of the"Rinse/Spin" program can be selected to perform pre-wash as for
clothes seriously stained with mud, and then add washing powder and select the full
program to wash.
Washing tips
put the easily damaged and loose clothes into mesh before washing.
put bulk clothes and easily suspended clothes at the bottom of tub.
Turn the easily damaged face of clothes inside before washing.
Notices:
If the clothes hold webbing and zipper you need to tie and zipper that before washing.
Get rid of mud on clothes before washing.
Please use the water that temperature is below 50
.
you can add some washing powder on the specially dirty place before washing.
If the water level is less than the set "Water level", the machine will add water automatically.
14
13
Download from Www.Somanuals.com. All Manuals Search And Download.
METHOD OF MAINTENANCE
TROUBLE SHOOTING
The following cases are not faults
Exceptional
Cause
Solution
phenomenon
1.There is water injection in time of washing or rinse, which is due to that the washer senses the
inadequacy of water and exchanges water level automatically.
Re-plug the power plug.
The power plug is not plugged tight.
The power switch is not switched
on.
Check the power socket, or change other
socket.
No indication
in controller
2.There is the phenomenon of intermittent spinning in the beginning of spinning, which is performed
to achieve better spinning effects.
Press "START/PAUSE" button.
Wait for switching on electricity.
Not press "START/PAUSE" button.
Power cut.
3. In the course of spin, the program return to the wash program. Because that is designed to rectify
the unbalanced distribution of load in the spin tub.
Do not rightly connect the tap with
the universal connector.
Re-install rightly the universal connector.
Screw tight the nut.
The inlet hose
.leakage
Do not screw tight the nut of the
water inlet hose.
Method Of Maintenance
The drain hose is wrung or jammed.
Loosen the drain hose for smooth flow
of water
Does not drain
Maintenance of shell
Use soft cloth to wipe off the
water and dirt on the surface
each time after use of the
washing machine. Detergent,
propellant and other chemicals
are not allowed to use, for they
can cause damage to the
surface.
After the whole washing program
Wait for coming water.
Stop water.
The washing machine will send off the "DOU-
DOU"sound after any program operation to
remind you of taking out the load or going on
with other operations.
Open the tap.
Do not open the tap.
Dose not inject water
Clean the netting according to the method of
"Cleaning of the water inlet".
Whether the wire netting in the water
inlet was stopped up by the sundries.
After finishing washing, please shut off the tap,
pull out the plug in case of water leakage or fire
This is automatic rectification for spinning
in the washing program. That the washing
are too much or too little, or that the
washing machine is not placed plane will
cause the unbalance in time of spinning. If
there is still abnormal circumstances after
checking the above-mentioned points,
please pull out the power plug and contact
with local service as soon as possible.
Spinning stops and
water injecting begains
in the course of spin
Cause by that the washing
Cleaning the water inlet
Cleaning of the lint filter
After long time use, the water inlet mesh bag may
be blocked with smudginess, and should be
cleaned according to the following steps:
1. Switch on the power, followed by shutting off the
tap .
2. Let the washer works for 5 seconds so that water
flows into the tub through the water inlet hose. then
turn off the power.
After using the
washing machine for a
period, please clean
according the following
steps:
After end to drain, do not close the lid.
Open the lid in course of spinning.
Does not spin
Close the upper lid.
1. Take out the lint filter.
2. Turn the mesh bag
outside and wash it
clean in the water.
3. Unload the water inlet hose and clean the mesh
bag, then restore the water inlet assembly.
In order to attain the better
spinning effect.
Belong to thenormal
phenomenon generally.
Clasper
Slot
Intermittent spinning
3. Restore it and refix it.
Before using the machine
water exists in the drain
hose.
Remainning water due to testing
or experiment in the factory.
Belong to thenormal
phenomenon generally.
Notices:
The washing machine does not work normally because the voltage is low or too high. Please pull
out the plug and wait till the voltage becomes normal.
If there is still abnormal circumstances after checking the above-mentioned points, please pull out
the plug. Do not repair it by yourself at home, which is very dangerous.
16
15
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHER FUNCTIONS
PRECAUTIONS
Function of fault alarm
Safe use of power
Keep away from dampness
Alarm of the
buzzing sound
Don't place the washing machine in extreme
damp surroudings, for dampness may weaken
the insulation of the machine, which may cause
electric shock or faults.
Please plug the power cord into the special
voltage. The plug-in and plug-out of the wire
should go on with the plug held with hand.
Indication of fault
Cause of fault
Solution of alarm
Phenomenon of fault
Open the lid to
deal with faults,
then close the
lid to solve the
alarm.
The buzzer
goes on
Entering water less than
16 minutes, reset water
Alarm for
water injection
E1
buzzing sound
for 10 seconds.
If the alarm
does not be
solved , every
16 minutes re-
buzzs for 10
seconds.
Open the lid after start the
delay time. Open the lid
when the washer is
Alarm for
opening lid
E2
Be examined imbalance
for the third time.
Imbalance alarm
Drain alarm
E3
E4
After draining for 4
minutes, does not
Don't open the lid in time of spinning
Don't use hot water
If the lid is opened in time of spinning, the washing
machine will arrest at once, which will shorten the
service life. Please avoid opening the lid in the
course of operation as possible
and furthermore, don't
Don't use hot water over 50
deformation of the plastics.
to avoid
put hands into the tub,
for it is very dangerous
that the clothes wind
the hand despite of low
Function of automatic power-off
speed of rotation.
1. Start 10 minutes later to not work, automatically shut off the power.
2. After end to wash and the buzzer sounds 6 times, automatically shut off the power at
once.
Avoid spray of water
Keep away from smoke and fire
Function of adjusting for unbalance
Don't place lighted candles, cigarettes and thermos
nearby to avoid fire accidents or deformation of the
plastics.
Don't let water spray onto the switch or the
control panel in case of electric shock and
1. If the clothes are placed uneven before spinning, easy to result in bigger vibrancy of spinning.
The washing machine has a function of adjusting unbalance. When working, the system of the
washing machine always inspects running state. If finding a phenomenon that the spinning vibrancy
is too big, the washing machine automatically start the adjusting program To adjust the clothes`s
state.
2. Thewashingmachinecanadjustunbalancetwice, ifnoeffect, itwillalarm.
17
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Size
30kg
526X536X885
mm
Weight of the product
Rated capacity of wash
and spinning
Rated input
power
6.0kg(dry clothes)
340W
230V~
50Hz
Maximum water pressure
permitted in the water inlet
0.6Mpa
0.1Mpa
Rated voltage
Minimum water pressure
permitted in the water inlet
Rated
frequency
Download from Www.Somanuals.com. All Manuals Search And Download.
|