IBM Network Card 22P7713 User Manual

ꢀꢁꢂ  
IBM High Rate  
Wireless LAN  
Mini-PCI Adapter  
User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety: Read first  
Before installing this product, read the Safety Information.  
Antes de instalar este produto, leia as Informações de Segurança.  
Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí.  
Læs sikkerhedsforskrifterne, før du installerer dette produkt.  
Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety  
Information.  
Avant dinstaller ce produit, lisez les consignes de sécurité.  
Vor der Installation dieses Produkts die Sicherheitshinweise lesen.  
Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.  
Lees voordat u dit product installeert eerst de veiligheidsvoorschriften.  
Les sikkerhetsinformasjonen (Safety Information) før du installerer dette  
produktet.  
© Copyright IBM Corp. 2002  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Antes de instalar este produto, leia as Informações sobre Segurança.  
Pred inštaláciou tohto zariadenia si pečítaje Bezpečnostné predpisy.  
Antes de instalar este producto lea la información de seguridad.  
Läs säkerhetsinformationen innan du installerar den här produkten.  
iv IBM High Rate Wireless LAN Mini-PCI Adapter: Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
About the IBM® High Rate Wireless LAN Mini-PCI Adapter .  
© Copyright IBM Corp. 2002  
v
Download from Www.Somanuals.com. All Manuals Search And Download.  
vi IBM High Rate Wireless LAN Mini-PCI Adapter: Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About the IBM® High Rate Wireless LAN Mini-PCI  
Adapter  
This section provides information on registering, installing, and using the IBM  
High Rate Wireless LAN Mini-PCI Adapter.  
Product registration  
Thank you for purchasing this IBM product. Please take a few moments to  
register your product and provide us with information that will help IBM to  
serve you better in the future. Your feedback is valuable to us in developing  
products and services that are important to you, as well as in developing better  
ways to communicate with you. Register your option on the IBM Web site at:  
www.ibm.com/pc/register  
IBM will send you information and updates on your registered product unless  
you indicate on the Web site questionnaire that you do not want to receive  
further information.  
Product description  
If you are using a wireless upgradable model of an IBM ThinkPad® R32 Series  
computer, X30 Series computer, or T30 Series computer, you can install the IBM  
High Rate Wireless LAN Mini-PCI Adapter (hereafter called the Mini-PCI  
Card) in a Mini-PCI Card slot on your computer.  
The option kit includes:  
v Mini-PCI Card  
v Mini-PCI guide  
v CD-ROM (device drivers and Users Guide)  
v Product warranty and notices for IBM High Rate Wireless LAN Mini-PCI  
Adapter  
© Copyright IBM Corp. 2002  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-1  
 
Installing the Mini-PCI Card  
Note: Use only the Mini-PCI Card provided by IBM.  
If your computer is a wireless upgradable model, and you are installing the  
Mini-PCI Card for the first time, follow the procedure below.  
For ThinkPad R32 Series computer  
If you are using ThinkPad R32 Series computer, do as follows:  
1. Turn off the computer; then disconnect the ac adapter and all cables from  
the computer.  
2. Close the computer display, and turn the computer over.  
3. Remove the battery. (For information on removing the battery, refer to the  
ThinkPad R32 Series Service and Troubleshooting Guide.)  
4. Loosen the screw on the cover of the Mini-PCI Card slot ꢀ1ꢁ; then remove  
the cover ꢀ2ꢁ.  
1-2 IBM High Rate Wireless LAN Mini-PCI Adapter: Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
5. Take the cables out of the cable holder as shown.  
Note: If a Mini-PCI Card has been installed in your computer, and you  
remove the Card and do not install a new one, put the cables in the  
cable holder after disconnecting them from the Card.  
6. Align the contact edge of the Mini-PCI Card with the corresponding  
socket contact of the computer ꢀ1ꢁ. Connect the cables to the new  
Mini-PCI Card ꢀ2ꢁ.  
About the IBM® High Rate Wireless LAN Mini-PCI Adapter 1-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. Pivot the card until you can snap it into place by pressing the upper side  
of the connectors as shown.  
Make sure that the card is firmly fixed in the slot and does not move  
easily.  
8. Align the tabs of the Mini-PCI Card slot cover with the corresponding  
slots; then press the cover flat.  
9. Tighten the screw of the cover.  
Attention: After you install a Mini-PCI Card, do not use your computer  
until you have closed the cover. Never use the computer with the cover  
open.  
10. Reinstall the battery. (For information on reinstalling the battery, refer to  
the ThinkPad R32 Series Service and Troubleshooting Guide.)  
11. Turn the computer over again. Connect the ac adapter and cables to the  
computer; then turn it on.  
For ThinkPad X30 Series computer  
If you are using ThinkPad X30 Series computer, do as follows:  
1. Turn off the computer. Then disconnect the ac adapter and all cables from  
the computer.  
2. Remove the battery and the keyboard. (For information on removing the  
battery and the keyboard, refer to the ThinkPad X30 Series Service and  
Troubleshooting Guide.)  
1-4 IBM High Rate Wireless LAN Mini-PCI Adapter: Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Take the cables out of a cable holder.  
Note: If a Mini-PCI Card has been installed in your computer, and you  
remove the Card and do not install a new one, put the cables in the  
cable holder after disconnecting them from the Card.  
4. Connect the cables to the new Mini-PCI Card.  
Note: Plug the gray cable with the tab marked MAIN into jack J1, and the  
black cable with the tab marked AUX into jack J2.  
About the IBM® High Rate Wireless LAN Mini-PCI Adapter 1-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Align the contact edge of the Mini-PCI Card with the corresponding socket  
contact of the computer.  
6. Pivot the Card until you can snap it into place by pressing the upper side  
of the connectors. Make sure that the card is firmly fixed in the slot and  
does not move easily.  
When attaching the Card, route the antenna cables to go under the cable  
guide as in ꢀaꢁ, and place the tabs as indicated by arrow ꢀbꢁ as in this  
figure.  
a
b
1-6 IBM High Rate Wireless LAN Mini-PCI Adapter: Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. Attach the Mini-PCI guide that comes with the option package.  
8. Reinstall the battery and the keyboard. (For information on reinstalling the  
battery and the keyboard, refer to the ThinkPad X30 Series Service and  
Troubleshooting Guide.)  
For ThinkPad T30 Series computer  
If you are using ThinkPad T30 Series computer, do as follows:  
1. Turn off the computer; then disconnect the ac adapter and all cables from  
the computer.  
2. Close the computer display, and turn the computer over.  
3. Remove the battery. (For information on removing the battery, refer to the  
ThinkPad T30 Series Service and Troubleshooting Guide.)  
About the IBM® High Rate Wireless LAN Mini-PCI Adapter 1-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Loosen the screws on the cover of the Mini-PCI Card slot ꢀ1ꢁ; then  
remove the cover ꢀ2ꢁ.  
5. Open the insulation sheet ꢀ1ꢁ, and take the cables out of the cable holder  
ꢀ2ꢁ.  
Note: If a Mini-PCI Card has been installed in your computer, and you  
remove the Card and do not install a new one, put the cables in the  
cable holder after disconnecting them from the Card.  
1-8 IBM High Rate Wireless LAN Mini-PCI Adapter: Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Align the contact edge of the Mini-PCI Card with the corresponding  
socket contact of the computer ꢀ1ꢁ. Connect the cables to the Mini-PCI  
Card ꢀ2ꢁ.  
7. Pivot the card until you can snap it into place by pressing the upper side  
of the connectors as shown.  
Make sure that the card is firmly fixed in the slot and does not move  
easily.  
About the IBM® High Rate Wireless LAN Mini-PCI Adapter 1-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. Cover the Mini-PCI Card with the insulation sheet ꢀ1ꢁ, and attach the  
Mini-PCI guide ꢀ2ꢁ that comes with the option package.  
9. Align the tabs of the Mini-PCI Card slot cover with the corresponding  
slots; then press the cover flat.  
10. Tighten the screws of the cover.  
Attention: After you install a Mini-PCI Card, do not use your computer  
until you have closed the cover. Never use the computer with the cover  
open.  
11. Reinstall the battery. (For information on reinstalling the battery, refer to  
the ThinkPad T30 Series Service and Troubleshooting Guide.)  
12. Turn the computer over again. Connect the ac adapter and cables to the  
computer; then turn it on.  
Installing the device driver  
If your computer is a wireless upgradable model, and you are installing the  
Mini-PCI Card for the first time, you need to install the device driver for the  
Card. To install the device driver, either click the Software section button of the  
CD, or refer to the following instructions.  
The device driver files are in the following directory:  
C:\DRIVERS\WIN\WLLANINT  
Note: On some computers, the device driver files are in the following directory  
instead:  
C:\IBMTOOLS\DRIVERS\WLLANINT  
1-10 IBM High Rate Wireless LAN Mini-PCI Adapter: Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installing the device driver in Microsoft® Windows® 98, Windows Me,  
Windows 2000, or Windows XP  
To install the device driver in Windows 98, Windows Millennium Edition (Me),  
Windows 2000 Professional, or Windows XP, do the following:  
1. Start your operating system. If you are using Windows 2000 or Windows  
XP, log on with a user ID authorized as an administrator.  
2. Click Start Run.  
3. Specify SETUP.EXE with a full path (C:\DRIVERS\WIN\WLLANINT\SETUP.EXE  
or C:\IBMTOOLS\DRIVERS\WLLANINT\SETUP.EXE).  
4. Click OK.  
5. Follow the instructions on the screen.  
6. When asked whether you want to restart the system, click Yes.  
Installing the device driver in Windows NT®  
To install the device driver in Windows NT, do the following:  
1. Start Windows NT. Log on with a user ID authorized as an administrator.  
2. Click Start Settings Control Panel.  
3. Double-click the Network icon.  
4. If this is the first time the Network has been configured, the Network  
Configuration dialog box is displayed. Otherwise, go to step 20 on  
5. <First Network Configuration> Click the Yes button.  
6. Select Wired to the Network.  
7. Click the Next button.  
8. Click the Select from list button.  
9. Click the Have Disk button.  
10. In the Insert Disk dialog box, type the path (C:\DRIVERS\WIN\WLLANINT or  
C:\IBMTOOLS\DRIVERS\WLLANINT) to the directory that contains the driver.  
11. Click the OK button.  
12. Select High Rate Wireless LAN Mini-PCI Adapter with Modem II.  
13. Click the OK button.  
14. Click the Next button.  
15. Follow the instructions on the screen.  
16. Follow the prompts for any Windows NT installation disks by typing the  
path to the directory that contains Windows NT files. (This is usually  
C:\i386, or, on the Windows NT CD-ROM, X:\i386.)  
17. Follow the instructions on the screen.  
18. When the installation is complete, click the Finish button.  
About the IBM® High Rate Wireless LAN Mini-PCI Adapter 1-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19. When asked whether you want to restart the system, click Yes.  
20. <Add wireless LAN to Network Configuration> Click the Adapters tab.  
21. Click the Add button.  
22. Click the Have Disk button.  
23. In the Insert Disk dialog box, type the path (C:\DRIVERS\WIN\WLLANINT or  
C:\IBMTOOLS\DRIVERS\WLLANINT) to the directory that contains the driver.  
24. Click the OK button.  
25. Select High Rate Wireless LAN Mini-PCI Adapter with Modem II.  
26. Click the OK button.  
27. Click the Close button.  
28. Follow the instructions on the screen.  
29. When asked whether you want to restart the system, click Yes.  
1-12 IBM High Rate Wireless LAN Mini-PCI Adapter: Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀꢁꢂ  
Part Number: 22P7713  
Printed in U.S.A.  
(1P) P/N: 22P7713  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Graco Tablet Accessory FT600 User Manual
Greenheck Fan Automobile Parts M8182 User Manual
Grizzly Sander H6192 User Manual
Grundig CRT Television LXW 82 6710 REF User Manual
Haier Refrigerator 300M User Manual
Hamilton Beach Oven 31150C User Manual
Hotpoint Cooktop CEO 647 Z User Manual
Hotpoint Cooktop ET6004 User Manual
Hotpoint Dishwasher DWF50 User Manual
HP Hewlett Packard Laptop 335555 001 User Manual