IBM Network Card 19K4543 User Manual

IBM  
High-Rate Wireless  
LAN PC Card  
User’s Guide  
OPTIONS  
by IBM  
19K4543  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IBM  
High-Rate Wireless  
LAN PC Card  
User’s Guide  
19K4543  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note: Before using this information and the product it supports, be sure to  
read the information under Appendix D, “Product warranties and  
notices” on page D-1.  
First Edition (May 2000)  
© COPYRIGHT INTERNATIONAL BUSINESS MACHINES CORPORATION, 2000.  
All rights reserved.  
Note to U.S. Government Users — Documentation related to restricted rights — Use,  
duplication or disclosure is subject to restrictions set forth in GSA ADP Schedule  
Contract with IBM Corp.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v  
Appendix A. Product specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1  
Appendix B. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1  
Appendix C. Help and service information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-1  
Appendix D. Product warranties and notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-1  
© Copyright IBM Corp. 2000  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iii  
iv High-Rate Wireless LAN PC Card User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Information  
Before installing this product, read the Safety Information book.  
Antes de instalar este produto, leia o Manual de Informações sobre Segurança.  
Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí.  
Læs hæftet med sikkerhedsforskrifter, før du installerer dette produkt.  
Lue Safety Information -kirjanen, ennen kuin asennat tämän tuotteen.  
Avant de procéder à l'installation de ce produit, lisez le manuel Safety Information.  
Vor Beginn der Installation die Broschüre mit Sicherheitshinweisen lesen.  
Installálás el tt olvassa el a Biztonsági el írások kézikönyvét !  
© Copyright IBM Corp. 2000  
v
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Prima di installare questo prodotto, leggere lopuscolo contenente le informazioni sulla  
sicurezza.  
Lees voordat u dit product installeert eerst het boekje met veiligheidsvoorschriften.  
Les heftet om sikkerhetsinformasjon (Safety Information) før du installerer dette  
produktet.  
Przed zainstalowaniem tego produktu należy przeczytać broszurę Informacje Dotyczące  
Bezpieczeństwa.  
Antes de instalar este produto, leia o folheto Informações sobre Segurança.  
Перед установкой продукта прочтите брошюру по технике безопасности  
(Safety Information).  
Pred inštaláciou tohto produktu si pre ítajte Informa nú brožúrku o bezpe nosti.  
Preden namestite ta izdelek, preberite knjižico Varnostne informacije.  
Antes de instalar este producto, lea la Información de Seguridad.  
Läs säkerhetsinformationen innan du installerar den här produkten.  
vi High-Rate Wireless LAN PC Card User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety Information vii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
viii High-Rate Wireless LAN PC Card Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About this book  
This manual contains instructions for installing and using the IBM High-Rate WIreless  
LAN PC Card. The manual is divided into two parts:  
Part 1: Installation and user’s guide  
This guide contains the product description, hardware and software installation  
instructions, and product use and maintenance information.  
Part 2: Appendixes  
The appendixes contain help and service information, the product warranties, and notices.  
Note: The illustrations in this manual might be slightly different from your hardware.  
© Copyright IBM Corp. 2000  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ix  
 
x
High-Rate Wireless LAN PC Card Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.  
Part 1: Installation and user’s guide  
This section provides the product and software descriptions, and the installation and user’s  
guide.  
Product description  
The High-Rate Wireless LAN PC Card is a standard PC Card that fits into any PC Card  
Type II slot.  
The High-Rate Wireless LAN PC Card has two light-emitting diode (LED) indicators and  
two integrated antennas. You can use the High-Rate Wireless LAN PC Card in  
combination with an external antenna.  
The High-Rate Wireless LAN PC Card is a wireless network PC Card that complies with  
the IEEE 802.11 standard on wireless LANs (Revision B) and supports data transfer rates  
up to 11 MBps.  
The High-Rate Wireless LAN PC Card is fully compatible with any other wireless LAN  
system based on direct sequence spread spectrum (DSSS) radio technology that complies  
with the IEEE 802.11 standard on wireless LANs (Revision B).  
The High-Rate Wireless LAN PC Card supports the following wireless LAN features:  
Automatic Transmit Rate Select mechanism in the range of “High, Medium, Standard  
and Low”  
Frequency Channel Selection (2.4 GHz)  
Roaming over multiple channels  
Card Power Management  
Wired Equivalent Privacy (WEP) data encryption, based on the 64 bit RC4  
encryption algorithm as defined in the IEEE 802.11 standard on wireless LANs  
In addition to this manual, your package contains the following:  
High-Rate Wireless LAN PC Card  
Transparent protective casing for PC Card storage  
Note: To extend the life of the PC Card hardware, store the PC Card in the protective  
casing whenever carrying the computer on travel without operating the device.  
The High-Rate Wireless LAN software CD  
If any of these items are missing or damaged, contact your reseller.  
© Copyright IBM Corp. 2000  
1-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Software description  
The High-Rate Wireless LAN software CD contains software and documentation for all  
High-Rate Wireless LAN products that support roaming functionality in indoor  
environments.  
The High-Rate Wireless LAN software CD is divided into two sections:  
X:\Manuals: User’s guides and reference documents, where X is the drive letter of  
your CD-ROM drive  
X:\Software: Software for High-Rate Wireless LAN client stations and infrastructure  
products, such as the High-Rate Wireless LAN Access Point  
Before installing the software, read the software license agreement (LICENSE.TXT)  
located in the root folder of the CD.  
You can visit the IBM Web site to:  
Verify if newer versions of the software that was shipped with your product are  
available  
Download and install the latest software with your purchased product  
You can download the latest software and documentation from the High-Rate Wireless  
LAN Web site at  
The High-Rate Wireless LAN software CD also contains a folder named Xtras. This folder  
contains additional tools that might be helpful for installing and managing your High-Rate  
Wireless LAN Network.  
The Acrobat folder includes a copy of the Adobe Acrobat Reader, which is required to  
view or print the High-Rate Wireless LAN user documentation included on this CD.  
The Adobe Acrobat Reader is owned by and licensed from Adobe Systems Incorporated.  
This software is provided “as is.”  
Note: IBM makes no warranty or representation, express or implied, relating to the  
completeness, reliability, effectiveness, accuracy, performance, or operation of the  
Adobe software, or as to its suitability, merchantability or fitness for a particular  
purpose or against infringement of intellectual property rights of any party.  
For more information about Adobe Acrobat software, see the Adobe Web site at  
1-2 High-Rate Wireless LAN PC Card User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Configuring the High-Rate Wireless LAN network  
You can use the High-Rate Wireless LAN PC Card Kit to:  
Connect your computer to a Peer-to-Peer workgroup of wireless computing devices  
Connect your computer to a local area network (LAN) infrastructure that includes  
IBM High-Rate Wireless LAN Access Points (Access Points), or other IEEE 802.11-  
compliant LAN systems  
Expand the capabilities of your Access Points, to support wireless devices that have  
been equipped with High-Rate Wireless LAN PC Cards  
Peer-to-Peer workgroups  
With the Peer-to-Peer workgroup configuration, you can quickly set up a small wireless  
workgroup, where the workgroup participants can exchange files using features like “Files  
®
and Printer Sharing” as supported by the Microsoft Network Neighborhood. You can  
use this type of wireless Peer-to-Peer networks while mobile, or in Small Office/Home  
Office (SOHO) environments. As long as the stations are within range of one another, this  
is the easiest and least expensive way to set up a wireless network.  
Infrastructure network  
With the High-Rate Wireless LAN Access Point, you can connect to a corporate LAN  
infrastructure to have wireless access to all network facilities.  
LAN infrastructures can be stand-alone wireless LANs or wireless network infrastructures  
connected to an existing Ethernet network  
Installing the High-Rate Wireless LAN PC Card  
Note: If you intend to use the High-Rate Wireless LAN PC Card in a High-Rate Wireless  
LAN Access Point, see the User’s Guide that was shipped with the access point, or  
download it from the IBM High-Rate Wireless LAN Web site at  
Perform the installation in two steps:  
1. Install the Client Manager software  
2. Install the device drivers  
Installing the Client Manager software  
The High-Rate Wireless LAN Client Manager can be used to monitor the quality of your  
network connection.  
To install the Client Manager software, do the following:  
1. Insert the High-Rate Wireless LAN software CD into the CD-ROM drive of your  
computer. If Autorun is enabled on your computer, the Wireless Networking Client  
Software window opens.  
Note: If you downloaded the software from the web, please refer to the installation  
instructions found on the Web site.  
2. Click Install Client Manager; then follow the on-screen instructions.  
Part 1: Installation and users guide 1-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Note: If Autorun is not enabled on your computer, you can start Client Manager by  
running the .EXE file located in the root directory of the High-Rate Wireless  
LAN software CD; then following the on-screen instructions.  
For instructions on how to use Client Manager, see “Using Client Manager” on page 1-12.  
Installing the device drivers  
This section provides instructions on installing the device drivers for your High-Rate  
®
®
Wireless LAN PC Card in Windows 95, Windows 98, Windows NT 4.0, and Windows  
2000.  
Note: Keep the Microsoft Windows installation CDs or software diskettes close at hand.  
If your computer came with a factory-installed Windows operating system, these  
files will be stored as .CAB files on the hard disk drive of your computer.  
Installing a High-Rate Wireless LAN PC Card requires the same level of expertise that  
you need to install any other type of standard Ethernet network adapter card. This manual  
assumes that you have a working knowledge of standard Microsoft Windows operating  
systems and of installing network adapter cards.  
Note: If your computer uses the CardWizard program for PC Card configuration, you  
must install the latest version of CardWizard on your computer. The latest version  
can be downloaded from the IBM Web site at  
Depending on your operating system and the configuration of your computer, the  
installation of the device drivers will consist of:  
1. Installing the device drivers  
2. Selecting the Miniport device driver  
Note: You will need to perform this procedure only if Windows did not  
automatically detect the right High-Rate Wireless LAN Miniport device  
drivers.  
3. Network installation  
Note: You will need to perform this procedure only if this is the very first time that  
networking support is installed on your computer.  
Installing the device drivers in Windows 95 and Windows 98  
The Windows 95 and Windows 98 operating systems support Plug and Play operation for  
PC Cards. When you insert the High-Rate Wireless LAN PC Card into your computer,  
these operating systems automatically detect the card and enable the High-Rate Wireless  
LAN Miniport device driver, or prompt you to install the device driver, when the operating  
system cannot find the required device driver. This typically occurs the first time you  
insert the High-Rate Wireless LAN PC Card into your computer.  
When the High-Rate Wireless LAN Miniport device driver is installed, you can remove  
and reinsert the card whenever you want, that is, you can "Hot Swap" the card.  
1-4 High-Rate Wireless LAN PC Card User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To install the High-Rate Wireless LAN PC Card in Windows 95 or Windows 98, do the  
following:  
1. Insert the High-Rate Wireless LAN PC Card into your computer.  
2. Turn on your computer.  
3. Insert the High-Rate Wireless LAN software CD into the CD-ROM drive of your  
computer. Windows automatically detects your PC Card, and the New Hardware  
Found Wizard window opens.  
4. Follow the on-screen instructions.  
5. When you are prompted to locate the device driver installation files, select the High-  
Rate Wireless LAN CD that comes with your PC Card kit, or select another source if  
you downloaded the most recent device drivers from the IBM High-Rate Wireless  
LAN Web site. Windows installs the device drivers.  
Note: When Windows completes the installation of the device drivers, the Add/Edit  
Configuration Profile window opens. In most cases, the Windows 95 or  
Windows 98 operating system automatically finds the correct device drivers. If  
you are prompted to select the device drivers from a list of device drivers,  
continue with “Selecting the Miniport device driver” on page 1-6.  
Part 1: Installation and users guide 1-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Continue with “Setting basic parameters” on page 1-8 to complete the installation of  
your High-Rate Wireless LAN PC Card.  
Note: In some occasions, your operating system might not detect the new hardware. This  
might happen when:  
The notebook computer into which you want to install the High-Rate Wireless  
LAN PC Card is a brand-new “out-of-the-box” computer, where the Windows  
95 or Windows 98 operating system was factory-installed.  
A previous installation of the High-Rate Wireless LAN PC Card was aborted  
before it was finished.  
Installing the device drivers in Windows NT  
Note: If networking is not installed, you are prompted whether you want it installed.  
Click Yes; then follow the on-screen instructions. Continue with the installation of  
the device drivers.  
To install the device drivers in Window NT, do the following:  
1. Install Client Manager using the instructions in “Installing the Client Manager  
software” on page 1-3.  
2. Insert the High-Rate Wireless LAN PC Card into your computer. The CardWizard  
window opens.  
3. Follow the on-screen instructions. When prompted for the location of the device  
drivers, select X:\Drivers\Win_NT, where X is the drive letter of your CD-ROM  
drive.  
4. When Windows completes the device driver installation, continue with “Setting basic  
parameters” on page 1-8.  
Installing the device drivers in Windows 2000  
To install the device drivers in Windows 2000, do the following:  
1. Install Client Manager using the instructions in “Installing the Client Manager  
software” on page 1-3.  
2. Insert the High-Rate Wireless LAN PC Card into your computer; then follow the on-  
screen instructions. The New Hardware Found Wizard window opens.  
3. The Digital Signature Not Found window might open, depending on your version of  
Windows 2000. Click Yes to continue.  
4. Windows 2000 completes completes the installation of the device drivers. Continue  
with “Setting basic parameters” on page 1-8.  
Selecting the Miniport device driver  
If your Windows operating system automatically detected your hardware, you are  
prompted to select a device driver from a list or to install the device driver from a diskette  
provided by the hardware manufacturer. If the correct device drivers are automatically  
found, go to “Setting basic parameters” on page 1-8.  
To select the miniport device driver, do the following:  
1. In the Select Network Adapter window, click Have Disk.  
2. Be sure that the High-Rate Wireless LAN Software CD is inserted into your  
computer; then click OK.  
1-6 High-Rate Wireless LAN PC Card User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Note: If you are prompted to identify the location of files, type the correct drive letter  
and directory; then click OK.  
Windows starts to copy files from your installation disks or CD and the High-Rate  
Wireless LAN software CD.  
Windows system files are usually on the Windows installation CD.  
If your computer comes with the Windows operating system factory-installed, choose  
the directory that contains the Windows setup files (.CAB files).  
When you are prompted to identify the High-Rate Wireless LAN device driver files  
(typically file names starting with the characters wv*.*), specify the drive and  
directory that contains your High-Rate Wireless LAN software:  
— If you are installing from the High-Rate Wireless LAN CD, the directory is  
X:\Drivers (where X is the drive letter of your CD-ROM drive).  
Note: There is a separate directory for Windows 95, Windows 98, Windows NT,  
and Windows 2000.  
— If you are installing files that you downloaded from the Internet,  
select the disk drive or directory where you saved the downloaded files.  
Note: If you previously installed a PC Card on your computer, most of these  
files are already available on your hard disk drive. If you do not have the  
Windows installation CD available, try replacing the proposed path in the  
Copy Files From window with: C:\WINDOWS\SYSTEM or  
C:\WINDOWS.  
Network installation  
If this is the first time that networking support is installed onto your computer, you will be  
prompted to enter a computer and workgroup name. These names will be used to identify  
your computer on the Microsoft Network Neighborhood. After you enter a computer and  
workgroup name, do the following:  
1. Click OK.  
2. In the Computer Name field, type a unique name for your computer. You can type  
any name you like.  
3. In the Workgroup field, type a unique name for your workgroup. You can type any  
name you like.  
4. (Optional) Provide a description of the computer in the Computer Description field.  
For more information about setting your Microsoft Network Neighborhood properties,  
consult your Windows documentation or the Windows online help information.  
Part 1: Installation and users guide 1-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting basic parameters  
After installing the device drivers, the Add/Edit Configuration Profile window opens. In  
the Add/Edit Configuration Profile window, you can specify one or more network  
connection profiles to enable you to dynamically switch your preferred network  
connection.  
Note: If you are using Windows 2000, the Add/Edit Configuration Profile window might  
not open automatically. If it does not, do the following:  
1. Click Start Settings Control Panel.  
2. Double-click Wireless Networking. The Add/Edit Configuration Profile  
window opens.  
For example, you can set up different profiles for:  
Office: To connect to a company network through an Access Point. see “Basic  
settings for existing networks” on page 1-8.  
Workgroup Computing: To share files in small Peer-to-Peer workgroups without an  
Access Point. see “Basic settings for Peer-to-Peer workgroups” on page 1-9.  
For more information about the different types of networks, see “Configuring the High-  
Rate Wireless LAN network” on page 1-3.  
To connect to a High-Rate Wireless LAN network, do the following:  
1. Assign a name to the network connection profile.  
2. From the menu, select how you want to connect to the wireless network.  
3. Click Edit Profile to view or modify the parameters that apply to your network.  
For first-time installations, set up the default profile using only basic settings. See “Basic  
settings for existing networks” on page 1-8.  
When you have completed and validated the installation of your PC Card, you can add  
additional profiles or edit the existing ones.  
For help, press F1 or click Help.  
Basic settings for existing networks: If you selected Connect to an Access Point in  
the Add/Edit Configuration Profile window, you only need to set the Network Name  
parameters. To set the Network Name parameters, do the following:  
1. In the Network Name field, define the name of the wireless network that you want to  
connect to. You can name the network anything you like.  
To connect to any High-Rate Wireless LAN network near your computer, you  
can leave the Network Name field blank, or enter ANY in the Network Name  
field.  
Note: When your Network Name field is set to ANY, your computer attempts to  
establish a radio connection with any High-Rate Wireless LAN network  
that provides good communications quality.  
To connect to only one specific wireless network, type the network name that  
applies to your network. Consult your LAN administrator for the the name that  
applies to your network.  
1-8 High-Rate Wireless LAN PC Card User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Note: The Network Name can be any alphanumeric string up to 32 characters,  
and in the range of a to z, A to Z, and 0 to 9. The network name is case-  
sensitive. For more information on network names, press F1 or click  
Help.  
2. Click OK to confirm the network name and return to the Add/Edit Configuration  
Profile window.  
3. Click OK again to continue the installation. Go to “Completing the installation” on  
page 1-9.  
In the High-Rate Wireless LAN Edit Configuration window, you can also change other  
parameters (Encryption, Advanced, Admin, and Adapter parameters). These parameters  
are described in the online help file of the device drivers. Consult your LAN  
Administrator for the parameter settings that apply to your network environment.  
Basic settings for Peer-to-Peer workgroups: If you selected to connect to a Peer-to-  
Peer workgroup in the Add/Edit Configuration Profile window, you only need to set the  
Network Name parameters. To set the Network Name parameters, do the following:  
1. In the Network Name field, define the name of the wireless network that you want to  
connect to. You can name the network anything you like.  
The Network Name can be any alphanumeric string up to 32 characters, and in  
the range of a to z, A to Z, and 0 to 9. The network name is case-sensitive. For  
more information on network names, press F1 or click Help.  
If there is already a Peer-to-Peer group with this name available your computer  
automatically connects to this workgroup.  
If there is not a Peer-to-Peer workgroup with this name, your computer  
automatically starts one with this name.  
2. Click OK to confirm the network name and return to the Add/Edit Configuration  
Profile window.  
3. Click OK again to continue the installation. Go to the next section.  
Completing the installation  
To complete the installation of the network, do the following:  
1. When you have finished setting the basic parameters, click OK to close the Add/Edit  
Configuration window. Windows completes building the device driver configuration  
database, and copies files from your CD-ROM or diskette to the hard disk drive of  
your computer.  
2. If the Windows operating system prompts you to identify the location of the  
Windows files, specify the drive and directory of the Windows Installation CD or  
diskettes.  
3. When Windows completes the copying of files, click OK to restart your computer.  
After you have restarted your computer, the Windows operating system detects the High-  
Rate Wireless LAN PC Card.  
Windows loads the High-Rate Wireless LAN Miniport device driver; then opens a  
window prompting you to enter a user name and password. The password you enter here  
will be the one used to log into the Microsoft Network Neighborhood.  
Part 1: Installation and users guide 1-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Verifying installation: You can use one of the following methods to verify whether the  
installation of the device drivers was successful:  
Verify that the PC Card icon is in the taskbar.  
Check the LEDs on your PC Card.  
— If the green power LED is a steady green, the PC Card is active  
— If the green Transmit/Receive LED is flickering green, data is being transferred  
by the PC Card.  
To check the quality of the network connection, you can install the High-Rate Wireless  
LAN Client Manager using instructions in “Installing the Client Manager software” on  
page 1-3.  
Note: Some older Windows 95 versions do not automatically install the necessary TCP/IP  
protocol, and you cannot connect to the network. If this is the case, see you  
Windows documentation to install the correct TCP/IP protocols.  
Setting advanced parameters  
Although your High-Rate Wireless LAN PC Card works fine in most network  
environment with the basic parameters, you might want to investigate the advanced  
parameters options as displayed on the Edit Configuration window for the High-Rate  
Wireless LAN PC Card.  
Note: Consult your LAN Administrator for information about whether these parameters  
are appropriate for your setting.  
Using and maintaining the High-Rate Wireless LAN PC Card  
This section provides instructions on using and maintaining your High-Rate Wireless  
LAN PC Card.  
Radio antennas  
The built-in radio and antennas of your High-Rate Wireless LAN PC Card perform best in  
an open environment with as few obstacles as possible. To achieve the maximum range  
for wireless communications do not cover the card with objects such as books or thick  
stacks of paper.  
If you are using the card inside a desktop computer, you might need to purchase the  
optional Range Extender Antenna.  
1-10 High-Rate Wireless LAN PC Card Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Removing the PC Card  
If you do not need the wireless connectivity of your High-Rate Wireless LAN PC Card,  
you can remove the PC Card from its slot.  
Attention: If you remove the High-Rate Wireless LAN PC Card from your computer, you  
will lose your connection to the network. Before removing the PC Card, be sure that you  
have closed all files and network applications.  
Always disable the PC Card before removing the PC Card from the slot, so that the  
Windows operating system:  
Logs off from the network server  
Disables the High-Rate Wireless LAN PC Card device driver  
Disconnects power to the PC Card slot, which will extend battery life for notebook  
computers  
To stop using the High-Rate Wireless LAN PC Card, do the following:  
1. Click the PC Card icon on the Windows taskbar.  
2. Select Stop High-Rate Wireless LAN PC Card.  
3. Remove the PC Card when prompted.  
Maintaining your PC Card  
If you are not using the High-Rate Wireless LAN PC Card for wireless communications,  
store it inside the transparent plastic casing that comes with your option package.  
To clean the PC Card, gently wipe it with a soft (damp) cloth.  
Part 1: Installation and users guide 1-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Attention: To avoid damage to the PC Card, do not clean it with abrasive materials or  
rinse it with liquids.  
Viewing other computers in the network  
To display the other High-Rate Wireless LAN stations in the network, do the following:  
1. Double-click My Computer.  
2. Double-click Network Neighborhood. This displays all of the stations in your  
Microsoft Networking Group.  
3. To display other workgroups in the network environment, double-click Entire  
Network.  
If you cannot find other High-Rate Wireless LAN-networked computers, you can verify  
whether the other High-Rate Wireless LAN computers are:  
Turned on and logged on to the network  
Configured to operate with identical Microsoft Network Neighborhood settings  
concerning:  
— Networking Protocol  
— Wireless Network Name  
— Workgroup Name  
To view or modify the Station Name or Workgroup of your computer, Do the following  
1. Click Start Settings Control Panel.  
2. Double-click Network.  
3. Click the Identification tab. In the identification window, you can verify or change  
the Station Name or Workgroup parameters.  
Note: You must restart your computer so that changes to the network settings take effect.  
To verify the radio connection with other stations refer to “Viewing and modifying PC  
Card settings” on page 1-13.  
Using Client Manager  
If you installed the High-Rate Wireless LAN Client Manager as described in “Installing  
the Client Manager software” on page 1-3, you can use the Client Manager to:  
Verify the quality of your wireless connection to the network  
View or modify the configuration settings of your wireless PC Card  
The Client Manager starts automatically every time you turn on your computer. The  
Client Manager icon is displayed in the Windows taskbar, and indicates that the  
Client Manager program is running. To view a detailed status overview of your network,  
click the Client Manager icon once with your left mouse button. For more options, use  
the right mouse button to click the Client Manager icon.  
1-12 High-Rate Wireless LAN PC Card Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Viewing wireless link quality  
You can use the Client Manager icon on the Windows taskbar to verify the link quality of  
your network connection.  
An overview of all possible icons is provided in the following table.  
Icon  
Description  
Excellent radio connection  
Color  
Green  
Good radio connection  
Green  
Yellow  
Red  
Marginal radio connection:  
Move closer to the High-Rate Wireless LAN Access Point or  
to the base station.  
Poor radio connection:  
Save your files and move closer to the access point or the  
base station.  
No radio connection:  
Red  
You have moved out of range of the network or the Client  
Manager is looking for an initial connection.  
Peer-to-Peer network connection  
Blank  
Viewing and modifying PC Card settings  
If you want to view or modify High-Rate Wireless LAN parameters, do the following:  
1. Use the right mouse button to click the Client Manager icon on the Windows  
taskbar.  
2. Select Configuration Profile.  
3. Select Add/Edit Profile to add a new profile or to modify an existing profile, or  
select One of the existing profiles (if available) to select a profile without viewing or  
modifying the settings.  
After selecting another profile, or modifying the existing one, the PC Card uses the  
selected profile to connect to the wireless network.  
Part 1: Installation and users guide 1-13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
If your Client Manager icon is not visible, start the Client Manager program again by  
doing the following:  
1. Click Start Programs High-Rate Wireless LAN workgroup  
2. Select Client Manager.  
1-14 High-Rate Wireless LAN PC Card Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix A. Product specifications  
This appendix provides the specifications for the High-Rate Wireless LAN PC Card.  
Physical specifications  
Form factor  
PC Card Type-II Extended  
Dimensions  
(LxWxH)  
117.8 x 53.95 x 8.7 mm (4.6 x 2.1 x .34 in.)  
Weight  
45 grams  
Mode  
Operation  
Transit  
Temperature  
Humidity  
0° to 50° C (32° to 50° F)  
-20° to 70° C (-4° to 158° F)  
95% maximum  
15 to 95% (No condensation  
allowed)  
Storage  
-10° to 60° C (14° to 140° F)  
10 to 90% (No condensation  
allowed)  
Power characteristics  
Doze mode  
10 mA  
Receive mode  
Transit mode  
Power supply  
180 mA  
280 mA  
5 V  
© Copyright IBM Corp. 2000  
A-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Networking characteristics  
Compatibility  
IEEE 802.11 Standard for Wirelesss LANs  
(DSSS)  
Network operating  
system  
Microsoft Windows  
Host operating system  
Windows 95: NDIS3 Miniport driver  
Windows NT 4.0: NDIS4 Miniport driver  
Windows 98 and Windows 2000: NDIS5  
Miniport driver  
Media access protocol  
Data rate  
CSMA/CA (collision avoidance) with  
acknowledgement (ACK)  
High: 11 MBps  
Medium: 5.5 MBps  
Low: 1 MBps  
(High-Rate Wireless  
LAN PC Cards use an  
automatic Transmit Rate  
Select mechanism)  
Radio characteristics  
Radio characteristics may vary according to:  
The country where the product was purchased  
The type of product that was purchased  
Wireless communication is often subject to local radio regulations. Although High-Rate  
Wireless LAN wireless networking products have been designed for operation in the  
license-free 2.4 GHz band, local radio regulations might impose a number of limitations to  
the use of wireless communication equipment.  
Note: Refer to the flyer included in yourt option package for country-specific regulatory  
information.  
To comply with such regulations, High-Rate Wireless LAN PC Cards are marketed with  
dedicated channel-sets, with a number of factory-programmed channels identified by the  
following acronyms:  
ETS: For countries that adhere to the regulations as defined by the European  
Telecommunications Standards Institute (ETSI).  
FCC: For countries that adhere to the regulations as defined by the US Federal  
Communications Commission (FCC).  
FR: For France  
JP: For Japan  
The acronym of the channel-set supported by your card is printed on a label on the back-  
side of your High-Rate Wireless LAN PC Card.  
A-2 High-Rate Wireless LAN PC Card User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RF frequency band  
2.4 GHz (2400 to 2500 MHz)  
Number of selectable sub-  
channels  
North America (FCC): 11  
Europe (ETS): 13  
France (FR): 4  
Japan (JP): 1  
Other countries: FCC: 11  
ETS: 13  
Modulation technique  
Direct sequence spread spectrum (DSSS)  
CCK for high and medium tranmit  
rates  
DQPSK for standard transmit rate  
DBPSK for low transmit rate  
Spreading  
11-chip Barker Squence  
-5  
Bit error rate (BER)  
Nominal outout power  
Better than 10  
15 dBm  
Wireless LAN Range  
Range (100  
bytes user  
data) /  
Medium  
speed  
5.5 MBps  
Standard  
speed  
2 MBps  
High speed  
11 MBps  
Low speed  
1 MBps  
transmit rate  
Open office  
envrionment  
160 m  
270 m  
400 m  
550 m  
1
(525 ft.)  
(886 ft.)  
(1312 ft.)  
(1805 ft.)  
Semi-open  
office  
environment  
50 m  
70 m  
90 m  
115 m  
(164 ft.)  
(230 ft.)  
(295 ft.)  
(377 ft.)  
2
3
Closed office  
25 m  
35 m  
40 m  
50 m  
(82 ft.)  
(115 ft.)  
(131 ft.)  
(165 ft.)  
Receiver  
sensitivity  
-83 dBm  
65 ns  
-87 dBm  
225 ns  
-91 dBm  
400 ns  
-94 dBm  
500 ns  
Delay spread  
(at FER of  
<1%)  
Appendix A. Product specifications A-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
In an open office environment, antennas can "see" each other. There are no physical  
obstructions between them.  
2
In a semi-open office environment, work space is divided by shoulder-height, hollow  
wall elements. Antennas are at desktop level.  
3
In a closed office environment, work space is separated by floor-to-ceiling brick walls.  
The range of the wireless signal is related to the transmit rate of the wireless  
communication. Communications at lower transmit rate may travel larger distances.  
Note: The range values listed in the table are typical distances as measured at the IBM  
High-Rate Wireless LAN laboratories. These values may vary according to the  
actual radio conditions at the location where the High-Rate Wireless LAN product  
will be installed.  
The range of your wireless devices can be affected when the antennas are  
placed near metal surfaces and solid high-density materials.  
Range is also impacted due to obstacles in the signal path of the radio that may  
either absorb or reflect the radio signal.  
Supported frequesncy sub-bands  
Subject to the radio regulations that apply in your country, your High-Rate Wireless LAN  
PC Card may support a different set of 2.4 GHz channels. Consult your Authorized High-  
Rate Wireless LAN reseller or IBM Sales office for information about the radio  
regulations that apply in your country.  
The following table lists the Hihg-Rate Wireless LAN IEEE 802.11 chanel sets in the 2400  
to 2500 MHz range.  
Channel ID  
FCC  
2412  
ETSI  
2112  
FR  
JP  
1
n/a  
n/a  
n/a  
n/a  
n/a  
n/a  
n/a  
n/a  
n/a  
2457  
2412  
2417  
2422  
2427  
2432  
2437  
2442  
2447  
2452  
2457  
2
2417  
2422  
2427  
2432  
2437  
2442  
2447  
2452  
2457  
2417  
2422  
2427  
2432  
2437  
2442  
2447  
2452  
2457  
3
4
5
6
7
8
9
10  
A-4 High-Rate Wireless LAN PC Card User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Channel ID  
11  
FCC  
2462  
ETSI  
2462  
FR  
JP  
2462  
2467  
2472  
n/a  
2462  
2467  
2472  
2484  
12  
13  
14  
n/a  
n/a  
n/a  
2467  
2472  
n/a  
When installing High-Rate Wireless LAN PC Cards, the channel configuration is  
managed as follows:  
For wireless clients that operate in a High-Rate Wireless LAN Infrastructure, the  
High-Rate Wireless LAN PC Card automatically starts operation at the channel  
identified by the access points. When roaming between different access points, the  
station can dynamically switch to another channel if required.  
For High-Rate Wireless LAN PC Cards installed into wireless clients that operate in  
an Peer-to-Peer workgroup mode, the PC Card will use channel 10 by default.  
When inserted into a access point, the High-Rate Wireless LAN PC Card will use the  
factory-set default channel, unless the LAN Administrator selected a different  
channel when configuring the access point device.  
Appendix A. Product specifications A-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A-6 High-Rate Wireless LAN PC Card User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B. Troubleshooting  
This section provides information on troubleshooting procedures.  
Troubleshooting the LEDs  
If you have difficulty using or installing your High-Rate Wireless LAN product, the error  
may be due to various causes:  
A component of the High-Rate Wireless LAN system is out of range, which prevents  
the PC Card from establishing a wireless connection with the network.  
There is a configuration mismatch, which prevents the PC Card from establishing a  
wireless connection with the (correct) network.  
Absence of or conflict with the High-Rate Wireless LAN device driver.  
there is a problem or conflict with the PC Card slot, which prevents the PC Card from  
receiving power.  
There is a conflict with the High-Rate Wireless LAN hardware and another device.  
The starting point to troubleshooting problems with your High-Rate Wireless LAN  
PC Card is to look at the LED activity of the High-Rate Wireless LAN PC Card. The  
following table provides an overview of the various modes of operation and the associated  
LED activity. The table also includes a number of troubleshooting hints, if required, that  
may help you solve the problem.  
Transmit  
Receive LED  
Power LED  
Description/action  
Continuous  
green  
Blinking  
The PC Card is turned on, and is  
sensing and transmitting data.  
Continuous  
green  
Off  
The PC Card is turned on; there is  
no wireless activity.  
Flicker  
Flicker  
Power management mode: The PC  
Card is turned on, but set to power-  
saving mode to conserve battery  
life. The card activates at regular  
intervals to check for wireless data.  
© Copyright IBM Corp. 2000  
B-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Transmit  
Receive LED  
Power LED  
Description/action  
Blink at 10-  
second intervals  
Blink at 10-  
second intervals  
The PC Card is working fine, but  
did not establish a wireless  
connection with the wireless  
infrastructure.  
Contact the LAN  
administrator to verify the  
Network Name assigned to  
the wireless infrastructure.  
Contact the LAN  
administrator to verify the  
correct values of the  
encryption keys.  
Contact the LAN  
administrator to verify  
whether the network  
infrastructure has been  
closed.  
Change the configuration of  
your PC Card to enter the  
correct Network Name.  
If there are no access points  
available, change the  
configuration of your PC  
Card to run in Peer-to-Peer  
mode.  
If both LEDs are off, then the PC Card is not turned on and it cannot receive or transmit  
data. This can be because:  
There is no device driver installed  
The card and device drivers are mismatched, preventing the device driver from  
loading  
There is a device conflict, preventing the device drivers from loading  
If both LEDs are off, take the following actions:  
Verify if a device driver has been installed. If not, install the device driver.  
Verify the device settings of the PC Card to determine the occurrence of a conflict  
with another device. If there is a conflict, change the settings of the PC Card or the  
conflicting device.  
Verify the versions of the device driver and the PC Card software.  
Consult the IBM High-Rate Wireless LAN Web site at  
to see if software upgrades are available.  
B-2 High-Rate Wireless LAN PC Card User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting the network connection  
If you cannot connect to the network, verify that your network name is correct.The High-  
Rate Wireless LAN Network Name is case-sensitive. When you enter this name, type the  
name between quotation marks, for example, “My Wireless Network”. If you omit the  
quotation marks, the driver will interpret the value as all upper-case, for example, MY  
WIRELESS NETWORK. If your access points are configured with both lower- and  
upper-case characters, the driver cannot establish a radio connection.  
LEDs work but you can’t connect to the network  
If you can not connect to the network while the LEDs indicate that the network is working  
properly (Power LED is on, Transmit Receive LED blinks) the TCP/IP settings of your  
network might not be properly set.  
Changing the TCP/IP settings  
To change the TCP/IP connections, consult your LAN administrator for the values of your  
TCP/IP settings; then do the following:  
1. Click Start Settings Control Panel  
2. Double-click Network.  
3. From the list of installed components, check if the TCP/IP -> High-Rate Wireless  
LAN PC Card protocol is installed.  
If the protocol is not yet installed, click Add; then select the TCP/IP protocol  
from the list. Refer to your Windows documentation for more information.  
If the protocol is installed, select the protocol and click Properties. Check if the  
parameters match the settings provided by your LAN Administrator. Make  
changes if necessary; then click OK.  
4. When prompted, restart your computer.  
Appendix B. Troubleshooting B-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B-4 High-Rate Wireless LAN PC Card User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix C. Help and service information  
This section contains information on how to obtain online and telephone technical  
support.  
Technical support  
Technical support is available during the life of your product. Assistance can be obtained  
through the Personal Computing Support Web site and the IBM Automated Fax System.  
During the warranty period, assistance for replacement or exchange of defective  
components is available. In addition, if your IBM option is installed in an IBM computer,  
you might be entitled to service at your location. Your technical support representative can  
help you determine the best alternative.  
Technical support  
IBM Personal Computing Support Web Site  
IBM Automated Fax System  
1-800-426-3395  
1-800-465-3299 (in Canada)  
Marketing, installation, and configuration support through the HelpCenter will be  
withdrawn or made available for a fee, at IBM’s discretion, 90 days after the option has  
been withdrawn from marketing. Additional support offerings, including step-by-step  
installa-tion assistance, are available for a nominal fee.  
Telephone technical support  
To assist the technical support representative, have available as much of the following  
information as possible:  
1. Option name  
2. Option number  
3. Proof of purchase  
4. Computer manufacturer, model, serial number (if IBM), and manual  
5. Exact wording of the error message (if any)  
6. Description of the problem  
7. Hardware and software configuration information for your system  
If possible, be at your computer. Your technical support representative might want to walk  
you through the problem during the call.  
For the support telephone number and support hours by country, refer to the following  
table or to the enclosed technical support insert. If the number is not provided, contact  
your IBM reseller or IBM marketing representative. Response time may vary depending  
on the number and nature of the calls received.  
Support 24 hours a day, 7 days a week  
Canada (Toronto only)  
1-416-333-3344  
© Copyright IBM Corp. 2000  
C-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Canada (all others)  
U.S.A. / Puerto Rico  
1-800-565-3344  
1-800-772-2227  
C-2 High-Rate Wireless LAN PC Card Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix D. Product warranties and notices  
Warranty Statements  
Part 2 is the same for both statements. Be sure to read both the Part 1 that applies to your  
country and Part 2.  
United States, Puerto Rico, and Canada (Z125-4753-05 11/97) “IBM Statement of  
Limited Warranty for United States, Puerto Rico, and Canada (Part 1 - General  
Terms)”  
Worldwide except Canada, Puerto Rico, Turkey, and United States (Z125-5697-  
01 11/97) “IBM Statement of Warranty Worldwide except Canada, Puerto Rico,  
Turkey, United States (Part 1 - General Terms)” on page D-4  
Worldwide Country-Unique Terms“Part 2 - Worldwide Country-Unique Terms” on  
page D-7  
IBM Statement of Limited Warranty for United States, Puerto Rico,  
and Canada (Part 1 - General Terms)  
This Statement of Warranty includes Part 1 - General Terms and Part 2 - Country-unique  
Terms. The terms of Part 2 may replace or modify those of Part 1. The warranties  
provided by IBM in this Statement of Warranty apply only to Machines you purchase for  
your use, and not for resale, from IBM or your reseller. The term "Machine" means an  
IBM machine, its features, conversions, upgrades, elements, or accessories, or any  
combination of them. The term "Machine" does not include any software programs,  
whether pre-loaded with the Machine, installed subsequently or otherwise. Unless IBM  
specifies otherwise, the following warranties apply only in the country where you acquire  
the Machine. Nothing in this Statement of Warranty affects any statutory rights of  
consumers that cannot be waived or limited by contract. If you have any questions, contact  
IBM or your reseller.  
The IBM Warranty for Machines  
Machine - IBM High-Rate Wireless LAN PC Card  
Warranty period* - 3 Years  
* Contact your place of purchase for warranty service information. Some IBM Machines are  
eligible for on-site warranty service depending on the country where service is performed.  
IBM warrants that each Machine 1) is free from defects in materials and workmanship and  
2) conforms to IBM's Official Published Specifications. The warranty period for a  
Machine is a specified, fixed period commencing on its Date of Installation. The date on  
your sales receipt is the Date of Installation, unless IBM or your reseller informs you  
otherwise.  
During the warranty period IBM or your reseller, if approved by IBM to provide warranty  
service, will provide repair and exchange service for the Machine, without charge, under  
© Copyright IBM Corp. 2000  
Download from Www.Somanuals.com. All Manuals Search And Download.  
D-1  
   
the type of service designated for the Machine and will manage and install engineering  
changes that apply to the Machine.  
If a Machine does not function as warranted during the warranty period, and IBM or your  
reseller are unable to either 1) make it do so or 2) replace it with one that is at least  
functionally equivalent, you may return it to your place of purchase and your money will  
be refunded. The replacement may not be new, but will be in good working order.  
Extent of Warranty  
The warranty does not cover the repair or exchange of a Machine resulting from misuse,  
accident, modification, unsuitable physical or operating environment, improper  
maintenance by you, or failure caused by a product for which IBM is not responsible. The  
warranty is voided by removal or alteration of Machine or parts identification labels.  
THESE WARRANTIES ARE YOUR EXCLUSIVE WARRANTIES AND  
REPLACE ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR  
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED  
WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS  
FOR A PARTICULAR PURPOSE. THESE WARRANTIES GIVE YOU SPECIFIC  
LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY  
FROM JURISDICTION TO JURISDICTION. SOME JURISDICTIONS DO NOT  
ALLOW THE EXCLUSION OR LIMITATION OF EXPRESS OR IMPLIED  
WARRANTIES, SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT  
APPLY TO YOU. IN THAT EVENT, SUCH WARRANTIES ARE LIMITED IN  
DURATION TO THE WARRANTY PERIOD. NO WARRANTIES APPLY AFTER  
THAT PERIOD.  
Items Not Covered by Warranty  
IBM does not warrant uninterrupted or error-free operation of a Machine.  
Unless specified otherwise, IBM provides non-IBM machines WITHOUT  
WARRANTIES OF ANY KIND.  
Any technical or other support provided for a Machine under warranty, such as assistance  
via telephone with "how-to" questions and those regarding Machine set-up and  
installation, will be provided WITHOUT WARRANTIES OF ANY KIND.  
Warranty Service  
To obtain warranty service for the Machine, contact your reseller or IBM. In the United  
States, call IBM at 1-800-565-3344. In Canada, call IBM at 1-800-565-3344. You may be  
required to present proof of purchase.  
IBM or your reseller provides certain types of repair and exchange service, either at your  
location or at a service center, to keep Machines in, or restore them to, conformance with  
their Specifications. IBM or your reseller will inform you of the available types of service  
for a Machine based on its country of installation. IBM may repair the failing Machine or  
exchange it at its discretion.  
When warranty service involves the exchange of a Machine or part, the item IBM or your  
reseller replaces becomes its property and the replacement becomes yours. You represent  
that all removed items are genuine and unaltered. The replacement may not be new, but  
will be in good working order and at least functionally equivalent to the item replaced.  
The replacement assumes the warranty service status of the replaced item.  
D-2 High-Rate Wireless LAN PC Card Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Any feature, conversion, or upgrade IBM or your reseller services must be installed on a  
Machine which is 1) for certain Machines, the designated, serial-numbered Machine and  
2) at an engineering-change level compatible with the feature, conversion, or upgrade.  
Many features, conversions, or upgrades involve the removal of parts and their return to  
IBM. A part that replaces a removed part will assume the warranty service status of the  
removed part.  
Before IBM or your reseller exchanges a Machine or part, you agree to remove all  
features, parts, options, alterations, and attachments not under warranty service.  
You also agree to  
1. ensure that the Machine is free of any legal obligations or restrictions that prevent its  
exchange;  
2. obtain authorization from the owner to have IBM or your reseller service a Machine  
that you do not own; and  
3. where applicable, before service is provided  
a. follow the problem determination, problem analysis, and service request  
procedures that IBM or your reseller provides,  
b. secure all programs, data, and funds contained in a Machine,  
c. provide IBM or your reseller with sufficient, free, and safe access to your  
facilities to permit them to fulfill their obligations, and  
d. inform IBM or your reseller of changes in a Machines location.  
IBM is responsible for loss of, or damage to, your Machine while it is 1) in IBMs  
possession or 2) in transit in those cases where IBM is responsible for the transportation  
charges.  
Neither IBM nor your reseller is responsible for any of your confidential, proprietary or  
personal information contained in a Machine which you return to IBM or your reseller for  
any reason. You should remove all such information from the Machine prior to its return.  
Production Status  
Each IBM Machine is manufactured from new parts, or new and used parts. In some cases,  
the Machine may not be new and may have been previously installed. Regardless of the  
Machines production status, IBMs appropriate warranty terms apply.  
Limitation of Liability  
Circumstances may arise where, because of a default on IBMs part or other liability, you  
are entitled to recover damages from IBM. In each such instance, regardless of the basis  
on which you are entitled to claim damages from IBM (including fundamental breach,  
negligence, misrepresentation, or other contract or tort claim), IBM is liable for no more  
than  
1. damages for bodily injury (including death) and damage to real property and tangible  
personal property; and  
2. the amount of any other actual direct damages, up to the greater of U.S. $100,000 (or  
equivalent in local currency) or the charges (if recurring, 12 monthscharges apply)  
for the Machine that is the subject of the claim.  
This limit also applies to IBMs suppliers and your reseller. It is the maximum for  
which IBM, its suppliers, and your reseller are collectively responsible.  
Appendix D. Product warranties and notices D-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UNDER NO CIRCUMSTANCES IS IBM LIABLE FOR ANY OF THE  
FOLLOWING: 1) THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES  
(OTHER THAN THOSE UNDER THE FIRST ITEM LISTED ABOVE); 2) LOSS  
OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR 3) SPECIAL,  
INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC  
CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS),  
EVEN IF IBM, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF  
THEIR POSSIBILITY. SOME JURISDICTIONS DO NOT ALLOW THE  
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL  
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY  
TO YOU.  
IBM Statement of Warranty Worldwide except Canada, Puerto Rico,  
Turkey, United States (Part 1 - General Terms)  
This Statement of Warranty includes Part 1 - General Terms and Part 2 - Country-unique  
Terms. The terms of Part 2 may replace or modify those of Part 1. The warranties  
provided by IBM in this Statement of Warranty apply only to Machines you purchase for  
your use, and not for resale, from IBM or your reseller. The term "Machine" means an  
IBM machine, its features, conversions, upgrades, elements, or accessories, or any  
combination of them. The term "Machine" does not include any software programs,  
whether pre-loaded with the Machine, installed subsequently or otherwise. Unless IBM  
specifies otherwise, the following warranties apply only in the country where you acquire  
the Machine. Nothing in this Statement of Warranty affects any statutory rights of  
consumers that cannot be waived or limited by contract. If you have any questions, contact  
IBM or your reseller.  
Machine - IBM High-Rate Wireless LAN PC Card  
Warranty period* - Three Years  
* Contact your place of purchase for warranty service information. Some IBM Machines are  
eligible for on-site warranty service depending on the country where service is performed.  
The IBM Warranty for Machines  
IBM warrants that each Machine 1) is free from defects in materials and workmanship and  
2) conforms to IBMs Official Published Specifications. The warranty period for a  
Machine is a specified, fixed period commencing on its Date of Installation. The date on  
your sales receipt is the Date of Installation, unless IBM or your reseller informs you  
otherwise.  
During the warranty period IBM or your reseller, if approved by IBM to provide warranty  
service, will provide repair and exchange service for the Machine, without charge, under  
the type of service designated for the Machine and will manage and install engineering  
changes that apply to the Machine.  
If a Machine does not function as warranted during the warranty period, and IBM or your  
reseller are unable to either 1) make it do so or 2) replace it with one that is at least  
functionally equivalent, you may return it to your place of purchase and your money will  
be refunded. The replacement may not be new, but will be in good working order.  
Extent of Warranty  
D-4 High-Rate Wireless LAN PC Card Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The warranty does not cover the repair or exchange of a Machine resulting from misuse,  
accident, modification, unsuitable physical or operating environment, improper  
maintenance by you, or failure caused by a product for which IBM is not responsible. The  
warranty is voided by removal or alteration of Machine or parts identification labels.  
THESE WARRANTIES ARE YOUR EXCLUSIVE WARRANTIES AND  
REPLACE ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR  
IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED  
WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS  
FOR A PARTICULAR PURPOSE. THESE WARRANTIES GIVE YOU SPECIFIC  
LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY  
FROM JURISDICTION TO JURISDICTION. SOME JURISDICTIONS DO NOT  
ALLOW THE EXCLUSION OR LIMITATION OF EXPRESS OR IMPLIED  
WARRANTIES, SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT  
APPLY TO YOU. IN THAT EVENT, SUCH WARRANTIES ARE LIMITED IN  
DURATION TO THE WARRANTY PERIOD. NO WARRANTIES APPLY AFTER  
THAT PERIOD.  
Items Not Covered by Warranty  
IBM does not warrant uninterrupted or error-free operation of a Machine.  
Unless specified otherwise, IBM provides non-IBM machines WITHOUT  
WARRANTIES OF ANY KIND.  
Any technical or other support provided for a Machine under warranty, such as assistance  
via telephone with "how-to" questions and those regarding Machine set-up and  
installation, will be provided WITHOUT WARRANTIES OF ANY KIND.  
Warranty Service  
To obtain warranty service for the Machine, contact your reseller or IBM. You may be  
required to present proof of purchase.  
IBM or your reseller provides certain types of repair and exchange service, either at your  
location or at a service center, to keep Machines in, or restore them to, conformance with  
their Specifications. IBM or your reseller will inform you of the available types of service  
for a Machine based on its country of installation. IBM may repair the failing Machine or  
exchange it at its discretion.  
When warranty service involves the exchange of a Machine or part, the item IBM or your  
reseller replaces becomes its property and the replacement becomes yours. You represent  
that all removed items are genuine and unaltered. The replacement may not be new, but  
will be in good working order and at least functionally equivalent to the item replaced.  
The replacement assumes the warranty service status of the replaced item.  
Any feature, conversion, or upgrade IBM or your reseller services must be installed on a  
Machine which is 1) for certain Machines, the designated, serial-numbered Machine and  
2) at an engineering-change level compatible with the feature, conversion, or upgrade.  
Many features, conversions, or upgrades involve the removal of parts and their return to  
IBM. A part that replaces a removed part will assume the warranty service status of the  
removed part.  
Before IBM or your reseller exchanges a Machine or part, you agree to remove all  
features, parts, options, alterations, and attachments not under warranty service.  
Appendix D. Product warranties and notices D-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
You also agree to  
1. ensure that the Machine is free of any legal obligations or restrictions that prevent its  
exchange;  
2. obtain authorization from the owner to have IBM or your reseller service a Machine  
that you do not own; and  
3. where applicable, before service is provided  
a. follow the problem determination, problem analysis, and service request  
procedures that IBM or your reseller provides,  
b. secure all programs, data, and funds contained in a Machine,  
c. provide IBM or your reseller with sufficient, free, and safe access to your  
facilities to permit them to fulfill their obligations, and  
d. inform IBM or your reseller of changes in a Machines location.  
IBM is responsible for loss of, or damage to, your Machine while it is 1) in IBMs  
possession or 2) in transit in those cases where IBM is responsible for the transportation  
charges.  
Neither IBM nor your reseller is responsible for any of your confidential, proprietary or  
personal information contained in a Machine which you return to IBM or your reseller for  
any reason. You should remove all such information from the Machine prior to its return.  
Production Status  
Each IBM Machine is manufactured from new parts, or new and used parts. In some cases,  
the Machine may not be new and may have been previously installed. Regardless of the  
Machines production status, IBMs appropriate warranty terms apply.  
Limitation of Liability  
Circumstances may arise where, because of a default on IBMs part or other liability, you  
are entitled to recover damages from IBM. In each such instance, regardless of the basis  
on which you are entitled to claim damages from IBM (including fundamental breach,  
negligence, misrepresentation, or other contract or tort claim), IBM is liable for no more  
than  
1. damages for bodily injury (including death) and damage to real property and tangible  
personal property; and  
2. the amount of any other actual direct damages, up to the greater of U.S. $100,000 (or  
equivalent in local currency) or the charges (if recurring, 12 monthscharges apply)  
for the Machine that is the subject of the claim.  
This limit also applies to IBMs suppliers and your reseller. It is the maximum for  
which IBM, its suppliers, and your reseller are collectively responsible.  
UNDER NO CIRCUMSTANCES IS IBM LIABLE FOR ANY OF THE  
FOLLOWING: 1) THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES  
(OTHER THAN THOSE UNDER THE FIRST ITEM LISTED ABOVE); 2) LOSS  
OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR 3) SPECIAL,  
INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC  
CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS),  
EVEN IF IBM, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF  
THEIR POSSIBILITY. SOME JURISDICTIONS DO NOT ALLOW THE  
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL  
D-6 High-Rate Wireless LAN PC Card Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY  
TO YOU.  
Part 2 - Worldwide Country-Unique Terms  
ASIA PACIFIC  
AUSTRALIA: The IBM Warranty for Machines: The following paragraph is added to  
this Section:  
The warranties specified in this Section are in addition to any rights you may have under  
the Trade Practices Act 1974 or other legislation and are only limited to the extent  
permitted by the applicable legislation.  
Extent of Warranty: The following replaces the first and second sentences of this  
Section:  
The warranty does not cover the repair or exchange of a Machine resulting from misuse,  
accident, modification, unsuitable physical or operating environment, operation in other  
than the Specified Operating Environment, improper maintenance by you, or failure  
caused by a product for which IBM is not responsible.  
Limitation of Liability: The following is added to this Section:  
Where IBM is in breach of a condition or warranty implied by the Trade Practices Act  
1974, IBMs liability is limited to the repair or replacement of the goods or the supply of  
equivalent goods. Where that condition or warranty relates to right to sell, quiet  
possession or clear title, or the goods are of a kind ordinarily acquired for personal,  
domestic or household use or consumption, then none of the limitations in this paragraph  
apply.  
PEOPLE’S REPUBLIC OF CHINA: Governing Law: The following is added to this  
Statement:  
The laws of the State of New York govern this Statement.  
INDIA: Limitation of Liability: The following replaces items 1 and 2 of this Section:  
1. liability for bodily injury (including death) or damage to real property and tangible  
personal property will be limited to that caused by IBMs negligence;  
2. as to any other actual damage arising in any situation involving nonperformance by  
IBM pursuant to, or in any way related to the subject of this Statement of Warranty,  
IBMs liability will be limited to the charge paid by you for the individual Machine  
that is the subject of the claim.  
NEW ZEALAND: The IBM Warranty for Machines: The following paragraph is  
added to this Section:  
The warranties specified in this Section are in addition to any rights you may have under  
the Consumer Guarantees Act 1993 or other legislation which cannot be excluded or  
limited. The Consumer Guarantees Act 1993 will not apply in respect of any goods which  
IBM provides, if you require the goods for the purposes of a business as defined in that  
Act.  
Limitation of Liability: The following is added to this Section:  
Where Machines are not acquired for the purposes of a business as defined in the  
Consumer Guarantees Act 1993, the limitations in this Section are subject to the  
limitations in that Act.  
EUROPE, MIDDLE EAST, AFRICA (EMEA)  
Appendix D. Product warranties and notices D-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The following terms apply to all EMEA countries.  
The terms of this Statement of Warranty apply to Machines purchased from an IBM  
reseller. If you purchased this Machine from IBM, the terms and conditions of the  
applicable IBM agreement prevail over this warranty statement.  
Warranty Service  
If you purchased an IBM Machine in Austria, Belgium, Denmark, Estonia, Finland,  
France, Germany, Greece, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg,  
Netherlands, Norway, Portugal, Spain, Sweden, Switzerland or United Kingdom, you may  
obtain warranty service for that Machine in any of those countries from either (1) an IBM  
reseller approved to perform warranty service or (2) from IBM.  
If you purchased an IBM Personal Computer Machine in Albania, Armenia, Belarus,  
Bosnia and Herzegovina, Bulgaria, Croatia, Czech Republic, Georgia, Hungary,  
Kazakhstan, Kirghizia, Federal Republic of Yugoslavia, Former Yugoslav Republic of  
Macedonia (FYROM), Moldova, Poland, Romania, Russia, Slovak Republic, Slovenia, or  
Ukraine, you may obtain warranty service for that Machine in any of those countries from  
either (1) an IBM reseller approved to perform warranty service or (2) from IBM.  
The applicable laws, Country-unique terms and competent court for this Statement are  
those of the country in which the warranty service is being provided. However, the laws of  
Austria govern this Statement if the warranty service is provided in Albania, Armenia,  
Belarus, Bosnia and Herzegovina, Bulgaria, Croatia, Czech Republic, Federal Republic of  
Yugoslavia, Georgia, Hungary, Kazakhstan, Kirghizia, Former Yugoslav Republic of  
Macedonia (FYROM), Moldova, Poland, Romania, Russia, Slovak Republic, Slovenia,  
and Ukraine.  
The following terms apply to the country specified:  
EGYPT: Limitation of Liability: The following replaces item 2 in this Section:  
2. as to any other actual direct damages, IBMs liability will be limited to the total amount  
you paid for the Machine that is the subject of the claim.  
Applicability of suppliers and resellers (unchanged).  
FRANCE: Limitation of Liability: The following replaces the second sentence of the  
first paragraph of this Section:  
In such instances, regardless of the basis on which you are entitled to claim damages from  
IBM, IBM is liable for no more than: (items 1 and 2 unchanged).  
GERMANY: The IBM Warranty for Machines: The following replaces the first  
sentence of the first paragraph of this Section:  
The warranty for an IBM Machine covers the functionality of the Machine for its normal  
use and the Machines conformity to its Specifications.  
The following paragraphs are added to this Section:  
The minimum warranty period for Machines is six months.  
In case IBM or your reseller are unable to repair an IBM Machine, you can alternatively  
ask for a partial refund as far as justified by the reduced value of the unrepaired Machine  
or ask for a cancellation of the respective agreement for such Machine and get your money  
refunded.  
Extent of Warranty: The second paragraph does not apply.  
D-8 High-Rate Wireless LAN PC Card Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warranty Service: The following is added to this Section:  
During the warranty period, transportation for delivery of the failing Machine to IBM will  
be at IBMs expense.  
Production Status: The following paragraph replaces this Section:  
Each Machine is newly manufactured. It may incorporate in addition to new parts, re-used  
parts as well.  
Limitation of Liability: The following is added to this Section:  
The limitations and exclusions specified in the Statement of Warranty will not apply to  
damages caused by IBM with fraud or gross negligence and for express warranty.  
In item 2, replace "U.S. $100,000" with "1.000.000 DEM."  
The following sentence is added to the end of the first paragraph of item 2:  
IBMs liability under this item is limited to the violation of essential contractual terms in  
cases of ordinary negligence.  
IRELAND: Extent of Warranty: The following is added to this Section:  
Except as expressly provided in these terms and conditions, all statutory conditions,  
including all warranties implied, but without prejudice to the generality of the foregoing  
all warranties implied by the Sale of Goods Act 1893 or the Sale of Goods and Supply of  
Services Act 1980 are hereby excluded.  
Limitation of Liability: The following replaces items one and two of the first paragraph  
of this Section:  
1. death or personal injury or physical damage to your real property solely caused by  
IBMs negligence; and 2. the amount of any other actual direct damages, up to the greater  
of Irish Pounds 75,000 or 125 percent of the charges (if recurring, the 12 monthscharges  
apply) for the Machine that is the subject of the claim or which otherwise gives rise to the  
claim.  
Applicability of suppliers and resellers (unchanged).  
The following paragraph is added at the end of this Section:  
IBMs entire liability and your sole remedy, whether in contract or in tort, in respect of any  
default shall be limited to damages.  
ITALY: Limitation of Liability: The following replaces the second sentence in the first  
paragraph:  
In each such instance unless otherwise provided by mandatory law, IBM is liable for no  
more than: (item 1 unchanged) 2) as to any other actual damage arising in all situations  
involving non-performance by IBM pursuant to, or in any way related to the subject  
matter of this Statement of Warranty, IBMs liability, will be limited to the total amount  
you paid for the Machine that is the subject of the claim.  
Applicability of suppliers and resellers (unchanged).  
The following replaces the second paragraph of this Section:  
Unless otherwise provided by mandatory law, IBM and your reseller are not liable for any  
of the following: (items 1 and 2 unchanged) 3) indirect damages, even if IBM or your  
reseller is informed of their possibility.  
SOUTH AFRICA, NAMIBIA, BOTSWANA, LESOTHO AND SWAZILAND:  
Limitation of Liability: The following is added to this Section:  
IBMs entire liability to you for actual damages arising in all situations involving  
Appendix D. Product warranties and notices D-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
nonperformance by IBM in respect of the subject matter of this Statement of Warranty will  
be limited to the charge paid by you for the individual Machine that is the subject of your  
claim from IBM.  
TURKIYE: Production Status: The following replaces this Section:  
IBM fulfills customer orders for IBM Machines as newly manufactured in accordance  
with IBMs production standards.  
UNITED KINGDOM: Limitation of Liability: The following replaces items 1 and 2 of  
the first paragraph of this Section:  
1. death or personal injury or physical damage to your real property solely caused by  
IBMs negligence;  
2. the amount of any other actual direct damages or loss, up to the greater of Pounds  
Sterling 150,000 or 125 percent of the charges (if recurring, the 12 monthscharges  
apply) for the Machine that is the subject of the claim or which otherwise gives rise to  
the claim.  
The following item is added to this paragraph:  
3. breach of IBMs obligations implied by Section 12 of the Sale of Goods Act 1979 or  
Section 2 of the Supply of Goods and Services Act 1982.  
Applicability of suppliers and resellers (unchanged).  
The following is added to the end of this Section:  
IBMs entire liability and your sole remedy, whether in contract or in tort, in respect of any  
default will be limited to damages.  
NORTH AMERICA  
CANADA: Warranty Service: The following is added to this section:  
To obtain warranty service from IBM, call 1-800-565-3344. In Toronto, call 416-383-  
3344.  
UNITED STATES OF AMERICA: Warranty Service: The following is added to this  
section:  
To obtain warranty service from IBM, call 1-800-772-2227.  
Notices  
This publication was developed for products and services offered in the U.S.A.  
IBM may not offer the products, services, or features discussed in this document in other  
countries. Consult your local IBM representative for information on the products and  
services currently available in your area. Any reference to an IBM product, program, or  
service is not intended to state or imply that only that IBM product, program, or service  
may be used. Any functionally equivalent product, program, or service that does not  
infringe any IBM intellectual property right may be used instead. However, it is the user’s  
responsibility to evaluate and verify the operation of any non-IBM product, program, or  
service.  
IBM may have patents or pending patent applications covering subject matter described in  
this document. The furnishing of this document does not give you any license to these  
patents. You can send license inquiries, in writing, to:  
IBM Director of Licensing  
IBM Corporation  
D-10 High-Rate Wireless LAN PC Card Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
North Castle Drive  
Armonk, NY 10504-1785  
U.S.A.  
The following paragraph does not apply to the United Kingdom or any country  
where such provisions are inconsistent with local law: INTERNATIONAL BUSINESS  
MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT  
WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT  
NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT,  
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do  
not allow disclaimer of express or implied warranties in certain transactions, therefore,  
this statement may not apply to you.  
This information could include technical inaccuracies or typographical errors. Changes are  
periodically made to the information herein; these changes will be incorporated in new  
editions of the publication. IBM may make improvements and/or changes in the  
product(s) and/or the program(s) described in this publication at any time without notice.  
Any references in this publication to non-IBM Web sites are provided for convenience  
only and do not in any manner serve as an endorsement of those Web sites. The materials  
at those Web sites are not part of the materials for this IBM product, and use of those Web  
sites is at your own risk.  
Trademarks  
The following terms are trademarks of the IBM Corporation in the United States or other  
countries or both:  
IBM  
Microsoft, Windows, and Windows NT, are trademarks of the Microsoft Corporation in  
the United States, other countries, or both..  
Other company, product, and service names may be trademarks or service marks of others.  
Electronic emission notices  
High-Rate Wireless LAN PC Card.  
Federal Communications Commission (FCC) Statement  
Note: This equipment has been tested and found to comply with the limits for a Class B  
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation. This  
equipment generates, uses, and can radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off and on, the  
user is encouraged to try to correct the interference by one or more of the following  
measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Appendix D. Product warranties and notices D-11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected.  
Consult an IBM authorized dealer or service representative for help.  
Properly shielded and grounded cables and connectors must be used in order to meet FCC  
emission limits. Proper cables and connectors are available from IBM authorized dealers.  
IBM is not responsible for any radio or television interference caused by using other than  
recommended cables and connectors or by unauthorized changes or modifications to this  
equipment. Unauthorized changes or modifications could void the user’s authority to  
operate the equipment.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following  
two conditions: (1) this device may not cause harmful interference, and (2) this device  
must accept any interference received, including interference that may cause undesired  
operation.  
Responsible party:  
International Business Machines Corporation  
New Orchard Road  
Armonk, NY 10504  
Telephone: 1-919-543-2193  
Tested To Comply  
With FCC Standards  
FOR HOME OR OFFICE USE  
Industry Canada Class B emission compliance statement  
This Class B digital apparatus complies with Canadian ICES-003.  
Avis de conformité à la réglementation d’Industrie Canada  
Cet appareil numérique de classe B est conforme à la norme NMB-003 du Canada.  
European Union EMC Directive conformance statement  
This product is in conformity with the protection requirements of EU Council Directive  
89/336/EEC on the approximation of the laws of the Member States relating to  
electromagnetic compatibility. IBM cannot accept responsibility for any failure to satisfy  
the protection requirements resulting from a nonrecommended modification of the  
product, including the fitting of non-IBM option cards.  
This product has been tested and found to comply with the limits for Class B Information  
Technology Equipment according to CISPR 22/European Standard EN 55022. The limits  
for Class B equipment were derived for typical residential environments to provide  
reasonable protection against interference with licensed communication devices.  
D-12 High-Rate Wireless LAN PC Card Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix D. Product warranties and notices D-13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Union Europea - Normativa EMC  
D-14 High-Rate Wireless LAN PC Card Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix D. Product warranties and notices D-15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
D-16 High-Rate Wireless LAN PC Card Users Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IBM  
Part Number:  
19K4543  
File Number: D4Q7A  
Printed in the United States of America  
on recycled paper containing 10&  
recovered post-consumer fiber.  
19K4543  
*0719K4543*  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Graco Inc Paint Sprayer 233701 User Manual
Grizzly Drill 1008 User Manual
HannsG Computer Monitor HSG1033 User Manual
Hearth and Home Technologies Indoor Fireplace SOULSTICE User Manual
HP Hewlett Packard Server BL460C G7 User Manual
HP Hewlett Packard Server DL140 User Manual
Huffy Fitness Equipment M6611043 User Manual
Hunter Fan Air Cleaner 30075 User Manual
IKEA Ventilation Hood HI370 User Manual
Impex Home Gym MFM 8250 User Manual