IBM Credit Card Machine OS User Manual
CICS® Transaction Server for OS/390®  
IBM  
CICS Transaction Affinities Utility Guide  
Release 3  
SC33-1777-02  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CICS® Transaction Server for OS/390®  
IBM  
CICS Transaction Affinities Utility Guide  
Release 3  
SC33-1777-02  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note!  
Before using this information and the product it supports, be sure to read the general information under “Notices” on page vii.  
Third edition (March 1999)  
This edition applies to Release 3 of CICS Transaction Server for OS/390, program number 5655-147, and to all  
subsequent versions, releases, and modifications until otherwise indicated in new editions. Make sure you are using  
the correct edition for the level of the product.  
This edition replaces and makes obsolete the previous edition, SC33-1777-01. The technical changes for this edition  
are summarized under ″Summary of changes″ and are indicated by a vertical bar to the left of a change.  
Order publications through your IBM representative or the IBM branch office serving your locality. Publications are  
not stocked at the address given below.  
At the back of this publication is a page entitled “Sending your comments to IBM”. If you want to make comments,  
but the methods described are not available to you, please address them to:  
IBM United Kingdom Laboratories, Information Development,  
Mail Point 095, Hursley Park, Winchester, Hampshire, England, SO21 2JN.  
When you send information to IBM, you grant IBM a nonexclusive right to use or distribute the information in any  
way it believes appropriate without incurring any obligation to you.  
© Copyright International Business Machines Corporation 1994, 1999. All rights reserved.  
Note to U.S. Government Users — Documentation related to restricted rights — Use, duplication or disclosure is  
subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corp.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Notices .  
Trademarks.  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
vii  
viii  
Preface .  
What this book is about .  
Who this book is for.  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
ix  
ix  
ix  
ix  
ix  
ix  
x
.
What you need to know to understand this book .  
How to use this book .  
Determining if a publication is current .  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Notes on terminology .  
Bibliography .  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
xi  
xi  
xi  
xii  
xii  
CICS Transaction Server for OS/390  
CICS books for CICS Transaction Server for OS/390  
CICSPlex SM books for CICS Transaction Server for OS/390 .  
Other CICS books .  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Summary of changes.  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
xiii  
xiii  
xiii  
xiii  
Changes for the CICS Transaction Server for OS/390 Release 3 edition  
Changes for the CICS Transaction Server for OS/390 Release 2 edition  
Changes for the CICS Transaction Server for OS/390 Release 1 edition  
Chapter 1. Introducing transaction affinities .  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
1
3
3
3
4
4
4
5
5
6
6
6
6
7
The benefits of dynamic routing .  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
What does dynamic routing cost?.  
Transaction affinities  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Inter-transaction affinity  
Transaction-system affinity .  
Affinity relations .  
Affinity lifetimes .  
.
.
.
.
.
.
.
.
CICS programming techniques for transaction affinity  
Safe programming techniques .  
Unsafe programming techniques .  
Suspect programming techniques.  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Avoiding the effects of transaction affinity .  
Protecting applications from one another .  
Chapter 2. Introducing the Transaction Affinities Utility  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
9
11  
12  
12  
13  
14  
15  
15  
16  
17  
17  
18  
18  
18  
Commands detected by the Transaction Affinities Utility  
.
.
.
.
.
.
.
.
.
.
.
.
.
The Scanner component .  
The Detector component .  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
What is detected .  
What is not detected  
.
.
.
Controlling the Detector .  
How the affinity data is collected .  
Saving affinity data .  
.
.
.
.
.
.
.
.
.
.
.
The affinity data VSAM files .  
The control record VSAM file .  
Detector performance .  
.
.
.
.
.
.
.
.
.
The Reporter component .  
The Builder component  
.
Chapter 3. Preparing to use the affinity utility program  
.
.
.
.
.
.
.
.
21  
© Copyright IBM Corp. 1994, 1999  
Download from Www.Somanuals.com. All Manuals Search And Download.  
iii  
Creating the VSAM files .  
Estimating the size of the MVS data space and VSAM files .  
Defining the VSAM files to CICS .  
Tailoring your CICS startup job.  
Restarting your CICS region  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
21  
21  
22  
23  
23  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Chapter 4. Running the Scanner .  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
25  
25  
27  
28  
Creating a summary report .  
Creating a detailed report  
.
.
.
.
.
.
.
.
.
Contents of a detailed report  
Chapter 5. Running the Detector .  
Displaying the Detector control screen .  
Starting the collection of affinity data  
Pausing the collection of affinity data  
Resuming the collection of affinity data.  
Stopping the collection of affinity data .  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
31  
32  
33  
34  
34  
35  
36  
39  
.
.
Changing the Detector options .  
Detector errors  
.
.
.
.
.
.
.
.
.
.
.
.
Chapter 6. Running the Reporter .  
Requesting a report from the Reporter .  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
41  
41  
42  
43  
46  
47  
48  
48  
49  
50  
50  
51  
Output from the Reporter.  
Affinity report .  
.
.
.
.
.
.
.
.
.
.
.
.
.
Producing affinity transaction group definitions .  
Using the affinity report  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Understanding the affinities .  
Modifying affinity transaction groups.  
Compressing affinity data.  
Using the IBM Cross System Product .  
.
.
.
.
.
Affinity analysis for a CICS region containing CSP 3.3 applications  
Detailed affinity analysis .  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Chapter 7. Running the Builder.  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
55  
56  
58  
58  
58  
61  
61  
61  
62  
Syntax for input to the Builder .  
.
.
.
HEADER statements .  
Output from the Builder  
.
.
.
.
.
Combined affinity transaction group definitions .  
Data sets processed report .  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Empty transaction groups report .  
Group merge report.  
Error report .  
.
.
.
.
.
.
.
.
.
.
.
.
.
Appendix A. Details of what is detected  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
65  
65  
66  
66  
66  
67  
67  
67  
68  
69  
69  
ENQ/DEQ .  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
TS commands.  
LOAD HOLD/RELEASE .  
RETRIEVE WAIT/START .  
ADDRESS CWA .  
.
.
.
GETMAIN SHARED/FREEMAIN .  
LOAD/FREEMAIN .  
CANCEL/DELAY/POST/START  
.
.
.
.
.
.
.
.
SPI commands  
WAIT commands .  
.
.
.
.
.
.
.
.
.
.
.
Appendix B. Correlating Scanner and Reporter output to source  
.
.
.
.
71  
iv CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reporter output .  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
71  
71  
71  
Scanner output  
Examples  
.
.
.
Appendix C. Useful tips when analyzing Transaction Affinities Utility  
reports  
COBOL affinities .  
LOGON or SYSTEM when PCONV expected .  
Unrecognized Transids  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
75  
75  
75  
75  
.
.
.
.
.
.
.
.
.
.
.
.
Appendix D. Diagnostics .  
Detector table manager diagnostics .  
Function code values .  
Detector CAFB request queue manager diagnostics .  
Function code values .  
Date formatter diagnostics .  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
77  
77  
77  
80  
80  
80  
80  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Reason code values  
Index .  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
81  
85  
Sending your comments to IBM  
Contents  
v
Download from Www.Somanuals.com. All Manuals Search And Download.  
vi CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notices  
This information was developed for products and services offered in the U.S.A. IBM  
may not offer the products, services, or features discussed in this document in other  
countries. Consult your local IBM representative for information on the products and  
services currently available in your area. Any reference to an IBM product, program,  
or service is not intended to state or imply that only that IBM product, program, or  
service may be used. Any functionally equivalent product, program, or service that  
does not infringe any IBM intellectual property right may be used instead. However,  
it is the user’s responsibility to evaluate and verify the operation of any non-IBM  
product, program, or service.  
IBM may have patents or pending patent applications covering subject matter  
described in this document. The furnishing of this document does not give you any  
license to these patents. You can send license inquiries, in writing, to:  
IBM Director of Licensing  
IBM Corporation  
North Castle Drive  
Armonk, NY 10504-1785  
U.S.A.  
For license inquiries regarding double-byte (DBCS) information, contact the IBM  
Intellectual Property Department in your country or send inquiries, in writing, to:  
IBM World Trade Asia Corporation  
Licensing  
2-31 Roppongi 3-chome, Minato-ku  
Tokyo 106, Japan  
The following paragraph does not apply in the United Kingdom or any other  
country where such provisions are inconsistent with local law:  
INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS  
PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS  
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES  
OF NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR A  
PARTICULAR PURPOSE. Some states do not allow disclaimer of express or  
implied warranties in certain transactions, therefore this statement may not apply to  
you.  
This publication could include technical inaccuracies or typographical errors.  
Changes are periodically made to the information herein; these changes will be  
incorporated in new editions of the publication. IBM may make improvements and/or  
changes in the product(s) and/or the program(s) described in this publication at any  
time without notice.  
Licensees of this program who wish to have information about it for the purpose of  
enabling: (i) the exchange of information between independently created programs  
and other programs (including this one) and (ii) the mutual use of the information  
which has been exchanged, should contact IBM United Kingdom Laboratories,  
MP151, Hursley Park, Winchester, Hampshire, England, SO21 2JN. Such  
information may be available, subject to appropriate terms and conditions, including  
in some cases, payment of a fee.  
© Copyright IBM Corp. 1994, 1999  
Download from Www.Somanuals.com. All Manuals Search And Download.  
vii  
 
The licensed program described in this document and all licensed material available  
for it are provided by IBM under terms of the IBM Customer Agreement, IBM  
International Programming License Agreement, or any equivalent agreement  
between us.  
Trademarks  
The following terms are trademarks of International Business Machines Corporation  
in the United States, or other countries, or both:  
BookManager  
CICS  
DB2  
IBM  
CICS/ESA  
CICSPlex  
Language Environment  
VTAM  
Other company, product, and service names may be trademarks or service marks  
of others.  
viii CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Preface  
What this book is about  
This book describes the affinity utility program. It explains what the utility does,  
how to install it, and how to run the various components of the utility.  
Who this book is for  
This book is for CICS system programmers who may be planning to use CICS  
dynamic routing for workload balancing, and need to determine whether any of the  
transactions in their CICS applications use programming techniques that cause  
inter-transaction affinity. It can also be used by application programmers to detect  
whether application programs they are developing are likely to cause  
inter-transaction affinity.  
In particular, this book is of interest to CICS system programmers who are planning  
to use the CICSPlex®SM element of CICS Transaction Server for OS/390 Release  
3 for workload balancing. For more information about CICSPlex SM, see the  
CICSPlex SM Concepts and Planning manual.  
It is also of use if you are planning to implement asynchronous processing using  
CICS function shipping or are planning to use the CICS transaction isolation facility.  
What you need to know to understand this book  
You need to be familiar with the CICS application programming interface (API) and  
the various programming techniques available to CICS application programmers. In  
particular, you should be familiar with those techniques that CICS application  
programs can use to pass data from one to another, such as sharing common  
storage, and techniques to synchronize their execution.  
“Chapter 1. Introducing transaction affinities” on page 1 gives a brief introduction to  
the inter-transaction affinity that can be caused by some of these techniques. For a  
full discussion of transaction affinities, see the CICS Application Programming  
Guide.  
How to use this book  
This book is intended to be read sequentially, so that you understand how to:  
1. Install the affinity utility  
2. Run the separate components  
Later, when you are familiar with the utility, you need only refer to the chapter  
dealing with the particular component that you want to run.  
Determining if a publication is current  
IBM regularly updates its publications with new and changed information. When first  
published, both hardcopy and BookManager softcopy versions of a publication are  
© Copyright IBM Corp. 1994, 1999  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ix  
 
usually in step. However, due to the time required to print and distribute hardcopy  
books, the BookManager version is more likely to have had last-minute changes  
made to it before publication.  
Subsequent updates will probably be available in softcopy before they are available  
in hardcopy. This means that at any time from the availability of a release, softcopy  
versions should be regarded as the most up-to-date.  
For CICS Transaction Server books, these softcopy updates appear regularly on the  
Transaction Processing and Data Collection Kit CD-ROM, SK2T-0730-xx. Each  
reissue of the collection kit is indicated by an updated order number suffix (the -xx  
part). For example, collection kit SK2T-0730-06 is more up-to-date than  
SK2T-0730-05. The collection kit is also clearly dated on the cover.  
Updates to the softcopy are clearly marked by revision codes (usually a “#”  
character) to the left of the changes.  
Notes on terminology  
CICS In general, this book refers to the Customer Information Control System as  
“CICS”, the element in the CICS Transaction Server for OS/390.  
MVS “MVS” is used for the operating system, which is an element of the CICS  
Transaction Server for OS/390.  
Argument zero  
When an EXEC CICS command is translated and compiled, it results in an  
encoded parameter list to be used with a call statement. The first parameter  
in this list is a constant known as the CICS argument zero. The first two  
bytes of this constant identify the command; for example, X'0A04' identifies  
it as a READQ TS command.  
x
CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Bibliography  
CICS Transaction Server for OS/390  
CICS Transaction Server for OS/390: Planning for Installation  
GC33-1789  
GC34-5352  
GC34-5353  
GC33-1681  
GI10-2506  
GC33-1707  
CICS Transaction Server for OS/390 Release Guide  
CICS Transaction Server for OS/390 Migration Guide  
CICS Transaction Server for OS/390 Installation Guide  
CICS Transaction Server for OS/390 Program Directory  
CICS Transaction Server for OS/390 Licensed Program Specification  
CICS books for CICS Transaction Server for OS/390  
General  
CICS Master Index  
CICS User’s Handbook  
CICS Transaction Server for OS/390 Glossary (softcopy only)  
Administration  
SC33-1704  
SX33-6104  
GC33-1705  
CICS System Definition Guide  
CICS Customization Guide  
CICS Resource Definition Guide  
CICS Operations and Utilities Guide  
CICS Supplied Transactions  
Programming  
SC33-1682  
SC33-1683  
SC33-1684  
SC33-1685  
SC33-1686  
CICS Application Programming Guide  
CICS Application Programming Reference  
CICS System Programming Reference  
CICS Front End Programming Interface User’s Guide  
CICS C++ OO Class Libraries  
CICS Distributed Transaction Programming Guide  
CICS Business Transaction Services  
Diagnosis  
SC33-1687  
SC33-1688  
SC33-1689  
SC33-1692  
SC34-5455  
SC33-1691  
SC34-5268  
CICS Problem Determination Guide  
CICS Messages and Codes  
CICS Diagnosis Reference  
CICS Data Areas  
CICS Trace Entries  
GC33-1693  
GC33-1694  
LY33-6088  
LY33-6089  
SC34-5446  
LY33-6090  
CICS Supplementary Data Areas  
Communication  
CICS Intercommunication Guide  
CICS Family: Interproduct Communication  
CICS Family: Communicating from CICS on System/390  
CICS External Interfaces Guide  
CICS Internet Guide  
SC33-1695  
SC33-0824  
SC33-1697  
SC33-1944  
SC34-5445  
Special topics  
CICS Recovery and Restart Guide  
CICS Performance Guide  
SC33-1698  
SC33-1699  
SC33-1700  
SC33-1701  
SC33-1702  
SC33-1777  
SC33-1939  
CICS IMS Database Control Guide  
CICS RACF Security Guide  
CICS Shared Data Tables Guide  
CICS Transaction Affinities Utility Guide  
CICS DB2 Guide  
© Copyright IBM Corp. 1994, 1999  
xi  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CICSPlex SM books for CICS Transaction Server for OS/390  
General  
CICSPlex SM Master Index  
SC33-1812  
GC33-0786  
SC33-0788  
SX33-6099  
CICSPlex SM Concepts and Planning  
CICSPlex SM User Interface Guide  
CICSPlex SM View Commands Reference Summary  
Administration and Management  
CICSPlex SM Administration  
CICSPlex SM Operations Views Reference  
CICSPlex SM Monitor Views Reference  
CICSPlex SM Managing Workloads  
CICSPlex SM Managing Resource Usage  
CICSPlex SM Managing Business Applications  
Programming  
SC34-5401  
SC33-0789  
SC34-5402  
SC33-1807  
SC33-1808  
SC33-1809  
CICSPlex SM Application Programming Guide  
CICSPlex SM Application Programming Reference  
Diagnosis  
SC34-5457  
SC34-5458  
CICSPlex SM Resource Tables Reference  
CICSPlex SM Messages and Codes  
CICSPlex SM Problem Determination  
SC33-1220  
GC33-0790  
GC33-0791  
Other CICS books  
CICS Application Programming Primer (VS COBOL II)  
CICS Application Migration Aid Guide  
CICS Family: API Structure  
CICS Family: Client/Server Programming  
CICS Family: General Information  
CICS 4.1 Sample Applications Guide  
CICS/ESA 3.3 XRF Guide  
SC33-0674  
SC33-0768  
SC33-1007  
SC33-1435  
GC33-0155  
SC33-1173  
SC33-0661  
If you have any questions about the CICS Transaction Server for OS/390 library,  
see CICS Transaction Server for OS/390: Planning for Installation which discusses  
both hardcopy and softcopy books and the ways that the books can be ordered.  
xii CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Summary of changes  
The affinity utility program is an integral part of CICS Transaction Server for OS/390  
and is for use only with the CICS Transaction Server for OS/390.  
To use the utility on CICS for MVS/ESA 4.1 and earlier releases of CICS, install the  
IBM CICS Transaction Affinities Utility MVS/ESA (program number 5696-582).  
Changes for the CICS Transaction Server for OS/390 Release 3 edition  
This book is based on the CICS Transaction Server for OS/390, release 2, edition,  
SC33-1777-01.  
Significant changes for this edition are indicated by vertical lines to the left of the  
changes.  
Changes for the CICS Transaction Server for OS/390 Release 2 edition  
This book is based on the CICS Transaction Server for OS/390, release 1, edition,  
SC33-1777-00.  
A new section has been added to “Chapter 6. Running the Reporter” on page 41.  
“Using the IBM Cross System Product” on page 50 describes the use of the  
Transaction Affinities Utility with programs developed using the IBM Cross System  
Product.  
Changes for the CICS Transaction Server for OS/390 Release 1 edition  
The chapter entitled “Installing the affinity utility” was renamed to “Preparing to use  
the Transaction Affinities Utility”, and was largely rewritten.  
The messages and codes previously published in Appendix C were moved to the  
CICS Messages and Codes manual. The affinity utility program messages became  
standard CICS messages. They are prefixed with the letters “DFH”, and have a  
component identifier of “AU”.  
© Copyright IBM Corp. 1994, 1999  
Download from Www.Somanuals.com. All Manuals Search And Download.  
xiii  
 
xiv CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1. Introducing transaction affinities  
This chapter provides a brief introduction to the concept of transaction affinities and  
the associated CICS programming techniques, and highlights the significance of  
transaction affinities in a dynamic routing (known in previous releases of CICS as  
dynamic transaction routing) environment. For more information about transaction  
affinities, see the CICS Application Programming Guide.  
|
|
This chapter introduces the following topics:  
v “The benefits of dynamic routing” on page 3  
v “Transaction affinities” on page 3  
v “CICS programming techniques for transaction affinity” on page 5  
v “Avoiding the effects of transaction affinity” on page 6  
v “Protecting applications from one another” on page 7  
CICS has been handling customers’ online transaction processing requirements for  
over thirty years. In that time, it has been extensively enhanced to meet the  
ever-growing needs of business applications, and to exploit the capabilities of  
modern computer processors and communication systems. One of the most  
significant enhancements in recent times is the addition of the dynamic routing  
facility.  
|
Originally, a full-function CICS ran in a single address space (region) within the  
MVS environment. Currently, most CICS users use some form of  
intercommunications to operate multiple, interconnected, CICS regions (a  
CICSplex). Using the CICS multiregion operation (MRO) facility, a CICSplex  
typically consists of one or more terminal-owning regions (TOR), and a number of  
application-owning regions to which the TORs route the incoming transactions for  
processing. The CICSPlex SM element of CICS Transaction Server for OS/390  
Release 3 includes a workload management component that optimizes processor  
capacity by dynamically routing transactions to whichever CICS region is the most  
appropriate at the time, taking into account any transaction affinities that exist. For  
an introduction to CICSPlex SM, see CICSPlex SM Concepts and Planning; for  
information about CICSPlex SM workload management, see CICSPlex SM  
Managing Workloads.  
CICS A  
Terminal-Owning  
Region (TOR)  
CICS B  
Application-Owning  
Region (AOR)  
End-user  
terminal  
MRO  
CICS Relay  
Transaction  
User  
Transaction  
links  
Figure 1. The CICS transaction routing facility  
Before CICS Transaction Server for OS/390 Release 3, TORs routed transactions to  
the AORs predefined in transaction resource definitions by the system programmer.  
This static form of transaction routing adds to the system administration burden of  
the system programmer, because when transaction workloads have to be  
rebalanced across the AORs, transaction resource definitions have to be modified  
accordingly.  
© Copyright IBM Corp. 1994, 1999  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
 
|
|
CICS Transaction Server for OS/390 Release 3 introduces extended dynamic  
routing facilities, that allow the dynamic routing of:  
|
|
|
|
|
|
|
|
|
|
|
|
v Transactions initiated at a terminal  
v EXEC CICS START requests that are associated with a terminal  
v EXEC CICS START requests that are not associated with a terminal  
v Dynamic program link (DPL) requests that are received using:  
– The CICS Web support  
– The CICS Transaction Gateway  
– External CICS interface (EXCI) client programs  
– Any CICS client workstation products using the External Call Interface (ECI)  
– Distributed Computing Environment (DCE) remote procedure calls (RPCs)  
– Open Network Computing (ONC) RPCs  
– Internet Inter-Object Request Block Protocol (IIOP)  
– Any function that issues an EXEC CICS LINK PROGRAM request  
|
|
v Transactions associated with CICS business transaction services (CICS BTS)  
activities.  
|
|
New terms have been introduced that describe the roles played by CICS regions in  
dynamic routing:  
|
|
|
|
|
|
Requesting region  
The CICS region in which the dynamic routing request originates. For  
transactions initiated at a terminal, and inbound client DPL requests, this is  
typically a TOR. For terminal-related EXEC CICS START commands, for  
non-terminal-related EXEC CICS START commands, for peer-to-peer DPLs,  
and for CICS BTS activities, the requesting region is typically an AOR.  
|
|
|
|
|
|
|
Routing region  
The CICS region in which the decision is taken on where the transaction or  
program should be run. For transactions initiated at a terminal, for EXEC  
CICS START commands associated with a terminal, and for inbound client  
DPL requests, this is typically a TOR. For non-terminla-related EXEC CICS  
START commands, for peer-to-peer DPL requests, and for CICS BTS  
activities, the routing region is typically an AOR.  
|
|
|
Target region  
The CICS region in which the transaction or program runs. For all  
dynamically-routed requests, this is typically an AOR.  
|
|
Full details about the new dynamic routing facilities are described in CICS  
Intercommunication Guide.  
|
|
|
|
|
|
|
The dynamic routing facility removes the need to specify the remote system name  
of a target region in the transaction definition. Instead, you let the routing determine  
dynamically to which target region it should route incoming transactions. Unlike  
static routing, where there can only ever be one target region to which the routing  
region can route a transaction, dynamic routing gives you the means to create  
several target regions with the capability to process any given workload, and to let  
the routing regions choose the best one from a candidate list.  
2
CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The benefits of dynamic routing  
Being able to route transactions to target regions dynamically offers many benefits  
in an online transaction processing (OLTP) system. The user can achieve:  
v Improved performance  
v Improved availability  
v Simplified systems management  
What does dynamic routing cost?  
Of course, the CICS-supplied code cannot determine where to send a transaction,  
this depends on your CICS environment and routing policies. It needs a facility for  
you to specify your routing policies in a form that CICS can use. This can be a  
user-written dynamic routing program used to supply the name of a suitable target  
region, or you can use the dynamic routing program EYU9XLOP provided with  
CICSPlex SM.. You can define the name of a dynamic routing program on either  
the DTRPGM system initialization (SIT) parameter, for terminal-related START and  
dynamic program link (DPL) requests, or the DSRTPRG SIT parameter for  
non-terminal-related START requests and CICS BTS processes.  
|
|
|
|
|
|
At the basic level, a dynamic routing program simply contains tables of user  
transaction identifiers, with the matching system identifiers (SYSIDs) of the target  
regions that can process the transactions. At the highest and most sophisticated  
level, the dynamic routing program would also be capable of detecting and  
managing any special factors that might affect transaction routing.  
|
|
|
One factor that can affect the otherwise free choice of target region is the use of  
particular CICS programming techniques that transactions use to pass data from  
one to another.  
Transaction affinities  
CICS transactions use many different techniques to pass data from one to another.  
Some techniques require that the transactions exchanging data must execute in the  
same CICS region, and therefore impose restrictions on the dynamic routing of  
transactions. If transactions exchange data in ways that impose such restrictions,  
there is said to be an affinity between them.  
There are two categories of affinity:  
v Inter-transaction affinity; see “Inter-transaction affinity” on page 4  
v Transaction-system affinity; see “Transaction-system affinity” on page 4  
The restrictions on dynamic routing caused by transaction affinities depend on the  
duration and scope of the affinities. Clearly, the ideal situation for a dynamic routing  
program is for there to be no transaction affinity at all, which means there is no  
restriction in the choice of available target regions for dynamic routing. However,  
even when transaction affinities do exist, there are limits to the scope of these  
affinities determined by the:  
|
v Affinity relations; see “Affinity relations” on page 4  
v Affinity lifetime; see “Affinity lifetimes” on page 5  
Chapter 1. Introducing transaction affinities  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
 
|
|
|
|
Note that, if you are dynamically routing non-terminal-related START and DPL  
requests, you should review your application to determine whether or not the  
application is suitable for dynamic routing. The Transaction Affinities Utility cannot  
detect affinities in these circumstances.  
Inter-transaction affinity  
Inter-transaction affinity is an affinity between two or more CICS transactions. It is  
caused by the transactions using techniques to pass information between one  
another, or to synchronize activity between one another, in a way that requires the  
transactions to execute in the same CICS region. Inter-transaction affinity, which  
imposes restrictions on the dynamic routing of transactions, can occur in the  
following circumstances:  
v One transaction terminates, leaving “state data” in a place that a second  
transaction can access only by running in the same CICS region as the first  
transaction.  
v One transaction creates data that a second transaction accesses while the first  
transaction is still running. For this to work safely, the first transaction usually  
waits on some event, which the second transaction posts when it has read the  
data created by the first transaction. This synchronization technique requires that  
both transactions are routed to the same CICS region.  
Transaction-system affinity  
Transaction-system affinity is an affinity between a transaction and a particular  
CICS region (that is, it is not an affinity between transactions themselves). It is  
caused by the transaction interrogating or changing the properties of that CICS  
region.  
Transactions with affinity to a particular system, rather than to another transaction,  
are not eligible for dynamic transaction routing. In general, they are transactions  
that use INQUIRE and SET commands or, depend on global user exit programs.  
Affinity relations  
|
|
The affinity relation determines how the dynamic routing program selects a target  
region for a transaction instance associated with the affinity. An affinity relation can  
be classified as one of the following:  
Global  
A group of transactions where all instances of all transactions in the group  
that are initiated from any terminal must execute in the same target region  
for the lifetime of the affinity. The affinity lifetime for global relations can be  
system or permanent.  
|
|
|
|
|
|
BAPPL  
All instances of all transactions in the group are associated with the same  
CICS BTS (Business Transaction Services) process. There may be many  
different userids and terminals associated with the transactions included in  
this affinity group.  
LUname  
A group of transactions where all instances of all transactions in the group  
that are initiated from the same terminal must execute in the same target  
region for the lifetime of the affinity. The affinity lifetime for LUname  
relations can be pseudoconversation, logon, system, or permanent.  
4
CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Userid  
A group of transactions where all instances of the transactions that are  
initiated from a terminal and executed on behalf of the same userid must  
execute in the same target region for the lifetime of the affinity. The affinity  
lifetime for userid relations can be pseudoconversation, signon, system, or  
permanent.  
|
Affinity lifetimes  
|
|
The affinity lifetime determines when the affinity is ended.An affinity lifetime can be  
classified as one of:  
System  
The affinity lasts for as long as the target region exists, and ends whenever  
the target region terminates (at a normal, immediate, or abnormal  
termination). (The resource shared by transactions that take part in the  
affinity is not recoverable across CICS restarts.)  
Permanent  
The affinity extends across all CICS restarts. (The resource shared by  
transactions that take part in the affinity is recoverable across CICS  
restarts.) This is the most restrictive of all the inter-transaction affinities.  
|
|
Process  
The affinity exists until the process completes.  
|
|
Activity  
The affinity exists until the activity completes.  
Pseudoconversation  
The (LUname or userid) affinity lasts for the whole pseudoconversation, and  
ends when the pseudoconversation ends at the terminal.  
Logon  
The (LUname) affinity lasts for as long as the terminal remains logged on to  
CICS, and ends when the terminal logs off.  
Signon  
The (userid) affinity lasts for as long as the user is signed on, and ends  
when the user signs off.  
Notes:  
1. For userid affinities, the pseudoconversation and signon lifetimes are possible  
only in those situations where one user per userid is permitted. Such lifetimes  
are meaningless if multiple users are permitted to be signed on with the same  
userid at the same time (at different terminals).  
2. If an affinity is both userid and LUname (that is, all instances of all transactions  
in the group were initiated from the same terminal and by the same userid),  
LUname takes precedence.  
CICS programming techniques for transaction affinity  
Associated with transaction affinity, there are three broad categories of CICS  
programming techniques:  
v Safe programming techniques  
v Unsafe programming techniques  
v Suspect programming techniques  
Chapter 1. Introducing transaction affinities  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Safe programming techniques  
The programming techniques in the safe category are the use of:  
v The communication area (COMMAREA) on CICS RETURN commands  
v A terminal control table user area (TCTUA) optionally available for each terminal  
defined to CICS  
|
v ENQMODEL definitions to give sysplex-wide scope to ENQs and DEQs  
Unsafe programming techniques  
The programming techniques in the unsafe category are the use of:  
v Long-life shared storage:  
– The common work area (CWA)  
– GETMAIN SHARED storage  
– Storage obtained via a LOAD PROGRAM HOLD  
v Task-lifetime local storage shared by synchronized tasks  
v Synchronization or serialization of tasks using CICS commands:  
– WAIT EVENT / WAIT EXTERNAL / WAITCICS commands  
|
|
– ENQ and DEQ commands that do not specify a length parameter and  
therefore ENQ by address  
|
|
|
– ENQ and DEQ commands that do specify a length and therefore ENQ by  
name, unless you have used ENQMODEL definitions to give sysplex-wide  
scope to the ENQs (and DEQs)  
Suspect programming techniques  
Some programming techniques may create affinity, depending on exactly how they  
are implemented. A good example is the use of temporary storage. Application  
programs using techniques in this category must be checked to determine whether  
they will work without restrictions in a dynamic routingenvironment.  
|
|
The programming techniques in the suspect category are the use of:  
v Temporary storage queues with restrictive naming conventions  
v Transient data queues and trigger levels  
v Synchronization or serialization of tasks using CICS commands:  
– RETRIEVE WAIT / START  
– START / CANCEL REQID  
– DELAY / CANCEL REQID  
– POST / CANCEL REQID  
|
v INQUIRE and SET commands and global user exits  
Avoiding the effects of transaction affinity  
|
|
|
|
|
|
In a dynamic routing environment, your dynamic routing program must take account  
of transaction affinity in order to route transactions effectively. Where possible, you  
should avoid creating application programs that cause affinity. However, where  
existing applications are concerned, it is important that you determine whether they  
are affected by transaction affinity before using them in a dynamic routing  
environment. The Transaction Affinities Utility is designed to help you with this task.  
6
CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Protecting applications from one another  
The transaction isolation function offers storage protection between application  
programs, ensuring that one application does not accidentally overwrite the storage  
of another.  
Transaction isolation ensures that user-key programs1 execute in their own  
subspace, with appropriate access to any shared storage, or to CICS storage. Thus  
a user transaction is limited to its own view of the address space. In general,  
transaction isolation ensures that each user-key program is allocated a separate  
(unique) subspace, with appropriate access to any shared storage or to CICS  
storage. They do not have any access to the user-key task-lifetime storage of other  
tasks. Existing applications should run unmodified provided they conform to  
transaction isolation requirements. However, a minority of applications may need  
special definition if they:  
v Issue MVS macros directly  
v Modify CICS control blocks  
v Have a legitimate need for one task to access or share another task’s storage  
Some existing transactions may share task-lifetime storage in various ways, which  
may prevent them running isolated from each other. To allow such transactions to  
continue running without requiring that they run in the base space (where they  
could corrupt CICS data or programs), a single common subspace is provided in  
which all such transactions can run. They are then isolated from the other  
transactions in the system that are running in their own subspaces, but are able to  
share each other’s data within the common subspace.  
You may have some transactions whose application programs access each other’s  
storage in a valid way. One such case is when a task waits on one or more event  
control blocks (ECBs) that are later posted, by another task, either an MVS POST  
or ‘hand posting’. For example, a task can pass the address of a piece of its own  
storage to another task (via a temporary storage queue or some other method) and  
then WAIT for the other task to post an ECB to say that it has updated the storage.  
Clearly, if the original task is executing in a unique subspace, the posting task will  
fail when attempting the update and hence fail to post the ECB, unless the posting  
task is executing in CICS key. CICS therefore checks when a WAIT is issued that  
the ECB is in shared storage, and raises an INVREQ condition if it is not.  
Storage for the timer-event control area on WAIT EVENT, and storage for event  
control blocks (ECBs) specified on WAIT EXTERNAL and WAITCICS commands,  
must reside in shared storage.2  
You can use the Transaction Affinities Utility to identify those transactions whose  
programs issue WAIT EVENT, WAIT EXTERNAL, or WAITCICS commands, or MVS  
POST macros.  
1. User key defines both the storage and execution key for user application programs.  
2. Shared storage is allocated from one of the user-key shared dynamic storage areas, below or above the 16MB boundary (SDSA or  
ESDSA).  
Chapter 1. Introducing transaction affinities  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
 
What next?  
This chapter has briefly summarized the techniques and commands that can  
cause transaction affinity. “Chapter 2. Introducing the Transaction Affinities  
Utility” on page 9 gives an overview of the Transaction Affinities Utility, and  
details of all the commands and command sequences that the Transaction  
Affinities Utility looks for.  
8
CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2. Introducing the Transaction Affinities Utility  
This chapter gives an overview of the Transaction Affinities Utility, and describes the  
basic components:  
v “Commands detected by the Transaction Affinities Utility” on page 11  
v “The Scanner component” on page 12  
v “The Detector component” on page 12  
v “The Reporter component” on page 18  
v “The Builder component” on page 18  
|
|
|
|
|
|
|
The Transaction Affinities Utility is designed to detect potential causes of  
inter-transaction affinity and transaction-system affinity for those users planning to  
use the CICS dynamic routing facility. It can be used to detect programs using  
EXEC CICS commands that may cause transaction affinity. It can also be used to  
create a file containing combined affinity transaction group definitions, suitable for  
input to the CICS system management product, the CICSPlex SM element of CICS  
Transaction Server for OS/390 Release 3.  
The commands that can be detected are listed in “Commands detected by the  
Transaction Affinities Utility” on page 11. The Transaction Affinities Utility is also of  
value for those users planning to use either asynchronous processing by CICS  
function shipping, or the transaction isolation facility.  
The Transaction Affinities Utility determines the affinities that apply to a single CICS  
region: that is, a single pure target region or single combined routing region/target  
region. It can be run against production CICS regions, and is also useful in a test  
environment, to detect possible affinities introduced by new or changed application  
suites or packages.  
|
|
Important note  
The Transaction Affinities Utility is only an aid to help you find any affinities in  
your applications. Relate the output from the Transaction Affinities Utility to the  
applications that contain affinities before deciding whether or not the  
applications are suitable for CICS dynamic routing.  
To ensure that you detect as many potential affinities as possible, use the  
Transaction Affinities Utility against all parts of your workload, including  
rarely-used transactions and abnormal situations.  
© Copyright IBM Corp. 1994, 1999  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
 
Figure 2 shows the affinity utility program. Each of the four components is described  
in more detail in the rest of this chapter.  
AOR or TOR/AOR  
Application  
Load Library  
1.  
2.  
Scanner  
Detector  
User  
Report  
Collected  
Affinity  
Data  
4.  
3.  
Builder  
Reporter  
Basic Affinity  
Transaction Groups  
Combined Affinity  
Transaction Groups  
Report  
To CICSPlex SM  
Figure 2. Affinity utility program components  
10 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Commands detected by the Transaction Affinities Utility  
You can use the Transaction Affinities Utility to detect instances of the EXEC CICS  
commands listed in Table 1.  
Table 1. Commands detected by the Transaction Affinities Utility  
Inter-transaction affinity commands  
Transaction-system affinity commands  
ENQ  
DEQ  
ENABLE PROGRAM  
DISABLE PROGRAM  
EXTRACT EXIT  
INQUIRE  
SET  
PERFORM  
READQ TS  
WRITEQ TS  
DELETEQ TS  
ADDRESS CWA  
LOAD  
RESYNC  
RELEASE  
DISCARD  
GETMAIN SHARED  
FREEMAIN  
RETRIEVE WAIT  
DELAY  
CREATE  
WAIT EXTERNAL  
WAIT EVENT  
WAITCICS  
POST  
START  
CANCEL  
CBTS STARTBROWSE  
CBTS GETNEXT  
CBTS ENDBROWSE  
COLLECT STATISTICS  
Notes:  
1. The Scanner may detect some instances of these commands that do not cause  
an affinity. For example, all FREEMAIN commands are detected but only those  
used to free GETMAIN SHARED storage may cause affinity.  
2. The Scanner also detects MVS POST SVC calls and MVS POST  
LINKAGE=SYSTEM non-SVC calls, because of their tie-up with the various  
EXEC CICS WAIT commands.  
3. The Transaction Affinities Utility does not search for transient data and file  
control EXEC CICS commands. They are assumed not to cause affinity  
because you can define transient data and file control resources as remote (in  
which case the request is function-shipped, causing no affinity problem).  
4. The Detector ignores commands that target remote resources and are function  
shipped, because by function shipping the command there is no affinity problem.  
5. The Scanner and Detector do not search for commands issued by any program  
named CAUxxxxx or DFHxxxxx, because CICS programs are not considered  
part of the workload. Also, the Detector does not search for commands issued  
from:  
v DB2® and DBCTL task-related user exits  
v User-replaceable modules  
6. There are other ways in which transactions can cause affinity with each other,  
but they are not readily detectable by the affinity utility program because they do  
not take place via the EXEC CICS API.  
7. The Detector lists WAIT commands as transaction-system affinities because  
only half of the affinity can be detected. (The Detector does not detect MVS  
POST calls or the hand posting of ECBs.)  
|
|
8. The Detector and the Report ignore ENQ and DEQ commands that specify an  
ENQSCOPE name.  
Chapter 2. Introducing the Transaction Affinities Utility 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The Scanner component  
The Scanner is a batch utility that scans a load module library to detect those  
programs in the library that issue EXEC CICS commands that may cause  
transaction affinity. It examines the individual object programs looking for patterns  
3
matching the argument zero format for the commands in question.  
The Scanner detects the use of the EXEC CICS commands listed in Table 1 on  
page 11, and MVS POST requests.  
The report produced by the Scanner indicates only that potential affinity problems  
may exist because it only identifies the programs that issue the commands. It  
cannot obtain dynamic information about the transactions using the programs, or  
the names of the resources acted upon. Use the report in conjunction with the main  
report produced by the Reporter (see “The Reporter component” on page 18).  
Notes:  
1. The Scanner operation is independent of the language the scanned program  
was written in and the release of CICS the scanned program was translated  
under.  
2. The Scanner may indicate an affinity problem that does not really exist, because  
the bit pattern found accidentally matches the argument zero format for an  
affinity command.  
3. The Scanner does not detect CICS macro-level commands.  
|
|
|
|
4. The Scanner distinguishes between ENQ by name and ENQ by address based  
on the presence of a length parameter on the EXEC CICS ENQ command. It  
does the same for DEQs. The reports show which ENQs and DEQs are by  
name and which are by address.  
The Detector component  
You can use the Detector in real-time to detect transaction affinities in a running  
CICS region, and to save details of the affinities in an MVS data space. This data is  
subsequently saved to DASD. The Detector consists of:  
v A control transaction, CAFF  
v An autosave transaction, CAFB  
v Some global user exit programs  
v A task-related user exit program  
This is shown in Figure 3 on page 13.  
The data is collected by the global user exit programs at exit points XEIOUT,  
XBADEACT, XMEOUT, and XICEXP, and a task-related user exit at task start and  
task end. Between them, these exit programs intercept all the EXEC CICS  
commands and other events (pseudoconversation end, terminal log off, user sign  
off) that are needed to deduce the affinities and their relations and lifetimes. These  
exit programs coexist with any other exit programs at the same exit points. (They  
can be placed before or after other exit programs, without any of the exit programs  
being affected.)  
|
3. For an explanation of argument zero, see “Notes on terminology” on page x.  
12 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Data space  
Collected affinity data  
Exit  
programs  
XEIOUT  
TRUE  
XMEOUT  
XICEXP  
XBADEACT  
CAFB  
CAFF  
CICS AOR  
or  
TOR/AOR  
User  
Collected  
affinity  
data  
Figure 3. Detector components  
You are recommended to run the Detector on stable CICS regions only. Do not  
apply maintenance to application programs while the Detector is running. Such  
maintenance may introduce or remove affinities, thus rendering collected data  
inaccurate.  
What is detected  
The Detector detects the EXEC CICS commands listed in Table 1 on page 11 that  
can cause transaction affinity. For ENQ and DEQ commands, the Detector  
distinguishes between ENQ by name and ENQ by address based on the presence  
of a length parameter on the EXEC CICS ENQ command. It does the same for  
DEQs. The reports show which ENQs and DEQs are by name and which are by  
address.  
|
|
|
|
|
It also detects:  
v The end of pseudoconversations, by detecting when one of the transactions in  
the pseudoconversation terminates without issuing an EXEC CICS RETURN  
TRANSID command with a non-zero transaction identifier. If a  
pseudoconversation ends, and the resource shared by transactions that take part  
in the affinity still exists, the lifetime of the affinity must be greater than PCONV.  
Chapter 2. Introducing the Transaction Affinities Utility 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
v Log offs and sign offs by intercepting messages DFHSN1200, DFHZC3462, and  
DFHZC5966.  
v Completion of CICS BTS activities and processes.  
For more information, see “Appendix A. Details of what is detected” on page 65.  
Worsening of transaction affinities relations  
In some cases, the Detector may not detect enough occurrences (at least 10) of an  
affinity command to be sure that the affinity is definitely with a terminal (LUNAME),  
userid (USERID), or CICS BTS process (BAPPL). In such cases, the Detector  
records the (worsened) affinity relation as GLOBAL instead of LUNAME or USERID.  
Such relation worsening is flagged by the Detector and reported by the Reporter.  
|
Worsening of transaction affinities lifetimes  
If a pseudoconversation ends, and the resource still exists, the Detector deduces  
that the lifetime is longer than PCONV, that is, one of LOGON, SIGNON, SYSTEM,  
or PERMANENT.  
If a log off or sign off occurs, and the resource still exists, the Detector deduces that  
the lifetime is longer than LOGON or SIGNON: that is, either SYSTEM or  
PERMANENT.  
|
|
|
If a CICS BTS activity completes and the resource still exits, the lifetime is  
worsened to process. If a CICS BTS process completes and the resource still exits,  
the liftime is worsened to system.  
In some cases, the Detector may not detect a log off or sign off, so cannot be sure  
that the affinity lifetime is LOGON or SIGNON. In such cases, the Detector records  
the (worsened) lifetime as SYSTEM or PERMANENT instead of LOGON or  
SIGNON. For example, this occurs when the CICS region the Detector is running  
on is a target region, because it is impossible in some cases to detect a log off or  
sign off that occurs in a connected routing region.  
|
|
Such lifetime worsening is flagged by the Detector, and reported by the Reporter.  
What is not detected  
The Detector does not detect EXEC CICS commands when the:  
v Detector is not running  
v Issuing program was translated with the SYSEIB option  
v Command is an EXEC CICS FEPI command  
v Command is not one that can cause transaction affinity  
v Program name starts with “CAU” or “DFH”  
v Program is a DB2 or DBCTL task-related user exit  
v Program is a CICS user-replaceable module  
v Transaction identifier does not match the prefix, if specified, for transactions to be  
detected  
v Command is not one of the affinity types specified to be detected  
v Command is function shipped to a remote CICS region  
v Inter-transaction affinity commands are used within the same task  
14 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
|
v Command is a non-terminal-related START or a DPL  
|
|
|
v ENQ or DEQ commands that specify a resource name for which an appropriate  
ENQMODEL definition is enabled, and that ENQMODEL has a non—blank  
ENQSCOPE  
The Detector does not detect CICS macro-level commands, MVS POST calls, or  
the hand posting of ECBs.  
If you continue a pseudoconversation by setting a transid in the TIOA (rather than  
by using RETURN TRANSID), the Detector cannot detect PCONV lifetimes. In this  
case, the shortest lifetime detected is LOGON or SIGNON because it interprets  
every transaction end as a pseudoconversation end.  
Ideally the Transaction Affinities Utility should ignore commands issued by  
task-related user exits and global user exits because they are not part of  
applications. However, it cannot distinguish such commands from others, and does  
detect them. If your user exits use commands that can cause transaction affinities,  
the commands are detected, perhaps making any affinity problem seem worse than  
it actually is.  
If an exit program at XICEREQ or XTSEREQ modifies the EXEC CICS command,  
that modification is not visible to the Detector. (It detects the original, unmodified  
command.) However, if an XICEREQ, XICEREQC, XEIIN, XTSEREQ, or  
XTSEREQC exit program (or an XEIOUT exit program invoked earlier) modifies  
EIBRESP, the Detector sees the modified value.  
Controlling the Detector  
You can monitor and control the Detector through the CAFF transaction, which  
enables you to start, pause, continue, and stop the collection of affinity data into the  
tables in the data space. Using the CAFF transaction, you can also specify for  
which affinity commands, and for which transactions, data is to be collected.  
The options that you specify to control the Detector for a CICS region are preserved  
in a recoverable VSAM control file. For more information about this file, see “The  
control record VSAM file” on page 17.  
How the affinity data is collected  
The Detector uses a number of affinity tables in the data space to hold collected  
affinity data. The affinity tables are in three categories:  
1. There is an affinity table, or set of tables, for each of the following command  
groups that cause inter-transaction affinity:  
v ENQ and DEQ commands  
v READQ TS, WRITEQ TS, and DELETEQ TS commands  
v LOAD HOLD and RELEASE commands  
v RETRIEVE WAIT and START commands  
v ADDRESS CWA commands  
v GETMAIN SHARED and FREEMAIN commands  
v LOAD and FREEMAIN commands  
v CANCEL, DELAY, POST, and START commands  
The tables for a particular group have a structure appropriate to that group.  
Chapter 2. Introducing the Transaction Affinities Utility 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2. There is an affinity table for each of the following command groups that cause  
transaction-system affinity:  
v INQUIRE, SET, ENABLE, DISABLE, EXTRACT, COLLECT STATS,  
PERFORM, DISCARD, CREATE, and RESYNC commands  
|
v CICS BTS BROWSE commands are treated as inquire commands  
v WAITCICS, WAIT EVENT, and WAIT EXTERNAL commands  
3. There are two affinity tables that are used as aids to searching some of the  
other tables.  
The affinity tables reside in the data space and are saved to the Transaction  
Affinities Utility files when you stop the Detector and, optionally, at predetermined  
intervals.  
Saving affinity data  
The affinity data collected by the Detector is saved to the Transaction Affinities  
Utility VSAM files by the autosave transaction, CAFB. For more information about  
these files, see “The affinity data VSAM files” on page 17.  
The CAFB transaction saves affinity data automatically when you stop the Detector.  
You can also specify that the CAFB transaction save affinity data as follows:  
v On a predetermined time/activity basis. That is, data is saved if either more than  
300 seconds has passed, or more than 1000 table elements have changed,  
since the last save.  
v When you pause the Detector.  
Once the CAFB transaction has saved any data collected, it either becomes  
dormant until next activated (while the Detector is still running or paused), or  
terminates (if the Detector has been stopped).  
Not all the affinity tables in the data space need to be saved, because some are  
temporary or are used only as an aid to searching. Furthermore, some tables  
contain temporary elements, used for recording a possible affinity. Such elements  
are not saved to the files. They are either deleted when the Transaction Affinities  
Utility deduces that there is actually no affinity, or are made permanent when it  
deduces that there really is affinity (in which case they get saved). Also, when data  
is saved, only those table elements that have been added or changed since the last  
save are written to the dataset. Time stamps in each table element indicate whether  
the element has been written already, and whether it has changed since the last  
write. This minimizes the number of writes performed.  
To improve performance, each affinity table is browsed and saved in its entirety,  
before the next table is considered.  
The affinity table elements are written in such an order that the data on the file is  
always consistent.  
Note: If CICS or the Detector abends, the affinity data may be incomplete. Where  
possible, the Reporter detects this and issues a message to warn about  
possible incomplete data.  
16 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The affinity data VSAM files  
The Detector uses three non-recoverable VSAM KSDS to hold saved affinity data.  
Ensure the files are big enough to hold the maximum amount of affinity data that  
might be collected. Three are required because of the wide range of key lengths  
that the different tables have.  
KSDS files are used because the Detector and the Reporter need keyed access to  
the data.  
The files are not recoverable because of the large amount of data that needs to be  
written. The data is written to the files in such a way that it remains consistent.  
When the data contained in the tables is saved, each element in each table is a  
single file record. Records are therefore of varying length. Each record has a prefix  
that contains a one-byte table identifier identifying the affinity table the record  
belongs to. The table identifier acts as the first part of the record key. The second  
part of the key is the key of the table element itself.  
Each file contains a header record. This enables both the Detector and the  
Reporter to validate that the files they have been presented with are indeed data  
files suitable for the Transaction Affinities Utility. The header record has a key in the  
same format as the rest of the keys on the file, so a table identifier of zero is used  
(no real table will have a table identifier of zero). The header record contains the  
CICS specific applid, thus allowing files to be cross-validated.  
The control record VSAM file  
The Transaction Affinities Utility control file is a recoverable VSAM KSDS file that  
holds a single control record. This record is used to preserve the Detector options  
and statistics, so that information is retained across Detector runs, transaction  
failures, and system failures and restarts. The record is created when the Detector  
transaction is first run on the CICS region, and is never deleted.  
The control record holds the following information:  
v CAFF options  
v Detector statistics  
v History information  
– Reason why STOPPED  
– Userid if STOPPED by user  
– Abend code if STOPPED by abend  
– Userid for last Detector options update  
– Date and time of last Detector options update  
– Specific applid of CICS system  
The record is updated whenever any of the above information changes. This will  
happen when the Detector options change, the Detector statistics change, or the  
Detector state changes to STOPPED.  
Note: The supplied definition for the control record VSAM file makes it recoverable  
to CICS. You can change the definition if you do not require recovery. See  
“Defining the VSAM files to CICS” on page 22 for more information.  
Chapter 2. Introducing the Transaction Affinities Utility 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Detector performance  
The Detector is intended to be run against production CICS regions. However, over  
the period when the Detector is running, the CICS region suffers a performance  
degradation (dependent on the workload and number of affinities) equivalent to the  
performance impact of vendor monitor products that use the same user exits. The  
Detector is intended to be used over limited periods. To further limit the impact of  
running the Detector during periods of particularly heavy workloads, you can pause  
or stop the collection of data, or select specific commands or transactions to search  
for.  
If your naming convention for TS queues uses a unique counter as part of the  
name, the Detector performance is likely to be worse than described above. This is  
because if every TS queue created has a unique name, the Detector creates a very  
large number of affinity records, which adversely affects performance.  
The most likely reason for poor performance is the detection of TS commands. You  
may prefer to run the Detector twice, once for TS commands and once for all other  
affinity commands.  
The Reporter component  
The Reporter is a batch utility that you can use to convert the affinity data collected  
by the Detector into two output formats:  
v A report presenting the affinity data in a readable form  
This is intended for use by system programmers and application designers, and  
indicates the transactions and programs issuing the EXEC CICS commands that  
cause inter-transaction and transaction-system affinities. This information should  
help you understand the transactions making up the workload, and should  
highlight the changes you need to make to remove unwanted affinities.  
v
A file containing a set of basic affinity transaction group definitions in a  
syntax approximating to the batch API of CICSPlex SM  
This is intended as input to the Builder, which can merge these basic groups into  
the combined groups suitable for input to CICSPlex SM.  
The input to the Reporter is the three files of affinity data from a single CICS region.  
The output from the Reporter therefore describes the affinities detected in a single  
CICS region.  
Note: The output produced may not contain all the transaction affinities in the CICS  
region concerned, because some affinities may not have been found by the  
Detector. You may have to supplement the basic affinity transaction groups  
with information from the Scanner report, or from your own knowledge of  
your transactions, before using the file as input to the Builder.  
The Builder component  
The Builder is a batch utility that you can run against a set of files containing the  
basic affinity transaction group definitions as created by the Reporter. The Builder  
produces a file containing combined affinity transaction group definitions suitable for  
input to CICSPlex SM.  
18 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The basic groups are combined because of a CICSPlex SM rule stating that a  
given tranid may appear only in a single transaction group. It is quite possible that a  
tranid may appear in more than one basic group, and so these must be combined  
to form larger groups that satisfy CICSPlex SM.  
Chapter 2. Introducing the Transaction Affinities Utility 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3. Preparing to use the affinity utility program  
This chapter describes what needs to be done before you can use the affinity utility  
program.  
v “Creating the VSAM files”  
v “Estimating the size of the MVS data space and VSAM files”  
v “Defining the VSAM files to CICS” on page 22  
v “Tailoring your CICS startup job” on page 23  
v “Restarting your CICS region” on page 23  
Creating the VSAM files  
The Transaction Affinities Utility uses one copy of each of the following VSAM files  
for each CICS region it is run against:  
Table 2. Transaction Affinities Utility VSAM files and associated jobs  
File  
Description  
Job  
CICSAFF.CAUCNTL  
A recoverable file used to hold control  
information  
CAUJCLCC  
CICSAFF.CAUAFF1  
CICSAFF.CAUAFF2  
CICSAFF.CAUAFF3  
Non-recoverable files used to hold affinity data CAUJCLCA  
with different key sizes (17, 33, and 225  
respectively)  
To create a set of these files for one CICS region, edit and run a copy of the  
associated jobs in the CICSTS13.CICS.SDFHINST library. Edit and run a copy of  
the CAUJCLCC and CAUJCLCA jobs for each CICS region against which you are  
going to use the Transaction Affinities Utility.  
Before you run the CAUJCLCC and CAUJCLCA jobs, change the following  
parameters in the jobs:  
v The JOB accounting parameters.  
v The prefix of the files (&AFFQ), this should contain a CICS region qualifier.  
v The volume id (&DSVOL) of the DASD device where the files are to reside.  
Estimating the size of the MVS data space and VSAM files  
An MVS data space is used to hold the affinity data collected by the Detector. The  
amount of storage required depends on the number of affinities discovered, the  
number of different transaction identifiers, and the number of terminals.  
To estimate the amount of storage for the data space (and therefore the size of the  
VSAM affinity files) that you are likely to need for the Detector, you can use the  
following algorithm (with storage values in bytes):  
Data space: (#transids * #termids * 250) + 5 000,000  
CAUAFF1 : (#transids * #termids * 40) + 1 000,.000  
CAUAFF2 : (#transids * #termids * 150) + 1 000,000  
CAUAFF3 : 1 000,000  
where:  
© Copyright IBM Corp. 1994, 1999  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
 
#transids  
is the number of transaction identifiers in the CICS region.  
#termids  
is the number of terminal identifiers in the CICS region.  
Note: The amount of storage needed in the data space for the Builder is about  
25% of the storage needed for the Detector.  
The algorithm assumes that all affinities are represented, and that all transactions  
participate in all affinities, and that all transactions run at all terminals (the worst  
possible scenario). This gives a worst case figure.  
For example, consider the worst case scenario of a CICS region with 500 different  
transaction IDs and 1000 terminals, where all transactions issue all affinity  
commands and all transactions run at all terminals.  
For this scenario, the storage requirement for the Detector in the data space is:  
Data space : 130 Megabytes  
CAUAFF1  
CAUAFF2  
CAUAFF3  
:
:
:
21 Megabytes  
76 Megabytes  
1
Megabyte  
The space required for the data space is different than that required for the files  
because:  
v each record has a storage overhead in the data space  
v certain tables are not saved to file  
v key length is fixed per file, so short keys must be padded out  
Notes:  
1. The critical affinity type is temporary storage. The space required for all other  
affinity types together should be no more than 5MB.  
2. The calculations in this section assume that you do not use unique counters  
when naming temporary storage queues. If you do use unique counters, the  
space needed for temporary storage affinity types is much greater. For your  
calculations with unique counters, replace #transids * #termids by the number  
of unique queues.  
Defining the VSAM files to CICS  
The CICS-supplied sample group, DFH$AFFY, contains definitions for:  
v three affinity data files (CAUAFF1, CAUAFF2 and CAUAFF3)  
v the affinity control file, CAUNCNTL  
Change some of the attributes of these resource definitions to suit your own  
environment. To do this, use the CEDA transaction (or the DFHCSDUP utility) to:  
1. COPY the sample group to a group of your own choosing. For example,  
CEDA COPY GROUP(DFH$AFFY) TO(mygroup)  
2. EXPAND group mygroup and change the following attributes appropriately:  
v For each resource definition, change the prefixes of the VSAM files, as  
defined by the CAUJCLCC and CAUJCLCA jobs.  
v For each resource definition, ensure that the LSRPOOLID specified for each  
file is capable of handling the keylength defined for the file. If it isn’t, change  
it so that it is. See Table 2 on page 21 for more information.  
22 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
v For file CAUCNTL only, if recovery is not required ensure that  
RECOVERY(NONE) and FWDRECOVLOG(NO) are specified.  
3. INSTALL group mygroup to make these definitions known to CICS.  
Tailoring your CICS startup job  
To enable the Transaction Affinities Utility to be run against your CICS region, take  
account of the following when setting up your CICS startup job:  
v The Transaction Affinities Utility sends messages to the transient data destination  
CAFF. For you to see all the messages sent to CAFF, the queue must be  
predefined to the transient data component. The CAFF queue is defined in the  
CICS-supplied group, DFHDCTG. DFHDCTG contains definitions for all the  
CICS-supplied transient data queues and is installed on cold starts as part of  
DFHLIST processing. Unlike most CICS-supplied groups, DFHDCTG is unique in  
that it is not locked. Therefore, you can alter the definition for CAFF using either  
the DFHCSDUP utility or the CEDA transaction.  
You do not have to specify the extrapartition transient data data set in your  
start-up JCL, because of the introduction of dynamic allocation for such data  
sets. If you want to use dynamic allocation, specify a DSName in the definition of  
the queue. Alternatively, you can add a DD statement for the queue in your JCL.  
For example:  
//CAFF DD SYSOUT=*  
The default definition in group DFHDCTG routes the messages sent to CAFF to  
the SYSOUT class ’*’.  
For more information about dynamic allocation and defining transient data  
queues, see the CICS Resource Definition Guide.  
v Set the ICVR system initialization parameter to at least 10 seconds; that is,  
ICVR=10000 (or a larger value). If you do not do this, the Detector or one of your  
own transactions may end prematurely with an abend code of AICA.  
v Set the DSHIPINT system initialization parameter to 0. If you specify a DSHIPINT  
value other than 0, the utility may not correctly observe terminal log offs or  
determine affinity life times.  
|
|
|
If the CICS region is a target region, specify 0 on the AILDELAY system initialization  
parameter for all routing regions that route to it. This enables the Detector to  
immediately see when a terminal logs off.  
(If you specify an AILDELAY value other than 0, the Detector may miss log offs and  
misinterpret affinity life times.)  
Restarting your CICS region  
Restart the CICS region using a CICS startup job modified for affinity utility program  
support, as described in “Tailoring your CICS startup job”.  
Chapter 3. Preparing to use the affinity utility program 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
24 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 4. Running the Scanner  
This chapter describes how to run the Scanner that scans load modules for  
instances of API commands that could cause inter-transaction affinity and  
transaction-system affinity.  
You can run the Scanner to produce either a summary report and module list to  
identify suspect modules or a detailed report of modules that contain possible  
affinity-causing EXEC CICS commands or MVS POST calls.  
The recommended way to use the Scanner is by:  
v “Creating a summary report”  
v “Creating a detailed report” on page 27  
Creating a summary report  
You can request a summary report from the Scanner by editing and running the job  
CAUJCLLS. This job can also output a list of modules with potential transaction  
affinities, for input to the CAUJCLLD job for more detailed reporting.  
Before running the CAUJCLLS job, change the following as appropriate:  
v The JOB accounting parameters  
v The PARM statement:  
PARM='$SUMMARY[,DETAILMODS]'  
where:  
$SUMMARY  
Specifies that a summary scan (and report) is required for the entire library,  
except for CICS modules, CICS tables, and those modules that cannot be  
loaded (due to some error).  
DETAILMODS  
Specifies that the names of those modules containing at least one possible  
affinity-causing EXEC CICS command or MVS POST command are to be  
written to the sequential file defined by the AFFMOD DD statement. This file  
may be used to restrict a subsequent detailed report, by specifying it on the  
DETAIL DD statement of a detailed report run of the Scanner.  
v The STEPLIB DD statement  
Specify the name of the Transaction Affinities Utility load library where you have  
installed the Scanner program, CAULMS.  
v The INPUT DD statement  
Specify the name of the load library to be scanned.  
v The SYSPRINT DD statement  
Specify the destination for the summary report.  
© Copyright IBM Corp. 1994, 1999  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
 
v The AFFMOD DD statement  
Specify the name of the sequential data set where the list of modules with  
potential transaction affinities is to be sent. You can edit the data set to alter the  
list of modules to be scanned before running the Scanner to produce a detailed  
report.  
v The DETAIL DD statement (dummy)  
You do not need this for a summary run.  
Each summary report contains:  
v A separate line giving the following information about each module in the library:  
– Name  
– Size  
– Language (if determined)  
– Number of possible affinity-causing EXEC CICS commands  
– Number of possible MVS POST commands  
If a module seems to contain affinity-causing EXEC CICS commands, it is  
flagged with the message “Possible affinity commands”. If a module seems to  
contain MVS POST commands, it is flagged with the message “Possible MVS  
POSTs”.  
Note: The language is determined only if at least one affinity-causing EXEC  
CICS command is detected, and is derived from the EXEC argument zero  
4
of the first such command. Therefore, if a load module is created from  
several source languages, only one language is indicated.  
v The total count of:  
– Modules in the library  
– Modules scanned  
– CICS modules and tables (not scanned)  
– Modules in error (not scanned)  
– Modules that possibly contain MVS POST commands  
– Modules that possibly contain affinity-causing EXEC CICS commands  
– Assembler modules  
– C/370 modules5  
– OS/VS COBOL modules  
– VS COBOL II modules5  
– PL/I modules5  
Figure 4 on page 27 is an example of a summary report produced by the Scanner.  
4. For an explanation of argument zero, see “Notes on terminology” on page x .  
5. This includes programs compiled by a Language Environment®/370-enabled compiler.  
26 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CICS TRANSACTION AFFINITIES UTILITY  
1995/11/24 Page  
1
LOAD MODULE SCANNER - SUMMARY LISTING OF CICSTEST.LOAD  
Module  
Name  
Module  
Length  
Module  
Language  
Affinity  
Statements  
MVS POSTs  
Comment  
-------- -------- ---------  
----------  
---------  
------------------------  
--------------------  
ACSA1  
AFFYIC  
AFFYTS  
00000198 ASSEMBLER  
00000308  
00000628  
3
0
0
4
0
0
0
0
3
2
2
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
Possible affinity commands.  
Possible affinity commands.  
COBACSA 000008B8 COBOL II  
CRMRPROG 000001A0  
DFHSRT1$  
DFHTCTSH  
DFHTSTEC  
CICS TABLE  
CICS TABLE  
CICS TABLE  
PLIACSA 000003C8 PL/I  
Possible affinity commands.  
Possible affinity commands.  
Possible affinity commands.  
Possible affinity commands.  
PLTCCC  
PLTCOB  
PLTPLI  
00000D48 C/370  
000009D8 COBOL II  
00000570 PL/I  
SCRATCH 000006D0  
TRANOUT 000008B8  
Possible MVS POSTs.  
CICS TRANSACTION AFFINITIES UTILITY  
1995/11/24 Page  
2
LOAD MODULE SCANNER - SUMMARY LISTING OF CICSTEST.LOAD  
LOAD LIBRARY STATISTICS  
==========================================================  
Total modules in library  
Total modules scanned  
Total CICS modules/tables (not scanned)  
Total modules in error (not scanned)  
Total modules containing possible MVS POSTs  
=
=
=
=
=
14  
11  
3
0
1
Total modules containing possible Affinity commands =  
6
1
1
0
2
2
Total ASSEMBLER modules  
Total C/370 modules  
Total COBOL modules  
Total COBOL II modules  
Total PL/I modules  
=
=
=
=
=
Figure 4. Example of a summary report produced by the Scanner  
Creating a detailed report  
You can request a detailed report from the Scanner by editing and running the job  
CAUJCLLD.  
Change the following statements as appropriate:  
v The PARM statement  
PARM='$DETAIL[,ALL]'  
$DETAIL  
Specifies that a detailed scan and report is required. The extent of the scan  
is defined by either the ALL parameter or the DETAIL DD statement.  
ALL  
Specifies that all modules in the load library are to be scanned for possible  
affinity-causing EXEC CICS commands and MVS POST commands.  
If ALL is omitted, only those modules listed in the file specified on the  
DETAIL DD statement are to be scanned. This file would normally be from  
the AFFMOD DD output of an Scanner summary report run, which you can  
edit before creating a detailed report.  
Chapter 4. Running the Scanner 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
v The STEPLIB DD statement  
Specify the name of the Transaction Affinities Utility load library in which you  
have installed the Scanner program, CAULMS.  
v The INPUT DD statement  
Specify the name of the load library to be scanned.  
v The SYSPRINT DD statement  
Specify the destination for the detailed report.  
v The AFFMOD DD dummy statement  
You do not need this for a detailed run.  
v The DETAIL DD statement  
Specify the name of the data set containing the list of modules to be scanned.  
This list may be created initially as the output from a summary run of the  
Scanner. If you specify ALL on the PARM statement, change the DETAIL DD  
statement to specify //DETAIL DD DUMMY.  
Contents of a detailed report  
Each detailed report contains a section for each module, with:  
v A header line giving the name, size, and entry point of the module  
v A line for each possible affinity-causing command found, giving:  
– The offset of the command argument zero declaration from the start of the  
load module.  
Note: This offset is not the same as the offset given by the Reporter; the  
offset given by the Reporter is for the command itself. (See page 45  
and page 71.)  
– The contents of the command argument zero declaration (in hexadecimal).  
– The EDF DEBUG line number, if present. This can provide a useful clue for  
identifying false affinities. If a section of a load module was translated with the  
DEBUG option, EDF DEBUG line numbers are given. For such a module, if  
no DEBUG line number is given, this may indicate that what was found was  
not an argument zero.  
– What the command appears to be (for example, WRITEQ TS).  
– Whether the affinity is inter-transaction (Trans), or transaction-system  
(System).  
v A line for each possible MVS POST command found, giving:  
– The offset of the MVS POST command from the start of the load module  
– The MVS POST instruction  
– The 12 bytes of storage immediately before, and the 10 bytes after, the MVS  
POST command  
– Whether the MVS POST is SVC or otherwise  
28 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
v A summary report of the modules, giving:  
– The total possible affinity commands  
– The total possible MVS post commands  
v Library totals, as for the summary report, but for only those modules selected for  
the detailed run.  
Figure 5 is an example of a detailed report produced by the Scanner.  
CICS TRANSACTION AFFINITIES UTILITY  
LOAD MODULE SCANNER - DETAILED LISTING OF CICSTEST.LOAD  
1995/11/24 Page  
Module Entry Point - 00000028  
1
Module Name - ACSA1  
Offset Storage Content (HEX)  
-------- ---------------------------------------------- ---------  
/
Load Module Length - 00000198  
/
EDF DEBUG  
Possible Command  
----------------------  
WRITEQ TS  
READQ TS  
DELETEQ TS  
Affinity  
--------  
Trans  
Trans  
Trans  
00000360 0A02E0004900004900  
00000400 0A04E8004900008902  
00000482 0A06E8004900002102  
Total possible Affinity commands =  
00000022  
00000028  
00000036  
3
0
Total possible MVS POSTs  
Module Name - TRANOUT  
Offset Storage Content (HEX)  
=
/
Load Module Length - 000008B8  
/
Module Entry Point - 00000028  
EDF DEBUG Possible Command  
Affinity  
--------  
System  
-------- ------------------------------------------------- --------- -----------------------  
00000534 4100411031341B00411010000A021B0041104000A021B00 MVS POST (SVC)  
Total possible Affinity commands =  
Total possible MVS POSTs  
CICS TRANSACTION AFFINITIES UTILITY  
0
1
=
1995/11/24 Page  
2
LOAD MODULE SCANNER - DETAILED LISTING OF CICSTEST.LOAD  
LOAD LIBRARY STATISTICS  
==========================================================  
Total modules in library  
Total modules scanned  
Total CICS modules/tables (not scanned)  
Total modules in error (not scanned)  
Total modules containing possible MVS POSTs  
=
=
=
=
=
2
2
0
0
1
1
1
0
0
0
0
Total modules containing possible Affinity commands =  
Total ASSEMBLER modules  
Total C/370 modules  
Total COBOL modules  
Total COBOL II modules  
Total PL/I modules  
=
=
=
=
=
Figure 5. Example of a detailed report produced by the Scanner  
Chapter 4. Running the Scanner 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
30 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5. Running the Detector  
This chapter describes how to run the Detector that runs in a CICS region looking  
for instances of API commands that could cause transaction affinity.  
This chapter describes how to perform the following functions:  
v “Displaying the Detector control screen” on page 32  
v “Starting the collection of affinity data” on page 33  
v “Pausing the collection of affinity data” on page 34  
v “Resuming the collection of affinity data” on page 34  
v “Stopping the collection of affinity data” on page 35  
v “Changing the Detector options” on page 36  
v “Detector errors” on page 39  
The commands looked for are those listed in “Commands detected by the  
Transaction Affinities Utility” on page 11.  
You can run the Detector either at a CICS 3270-type terminal (through interactive  
screens or single-line commands), from a console, or from an application program.  
This chapter primarily describes how to use the Detector through the interactive  
screens at a CICS terminal, but also gives equivalent commands to use at a  
terminal, at a console, or in an application program.  
For an overview of the Detector, see “The Detector component” on page 12.  
You can control the Detector by:  
v Changing the state  
This is described in topics “Starting the collection of affinity data” on page 33  
through “Stopping the collection of affinity data” on page 35.  
v Changing the options  
The options that you can select are shown in Figure 7 on page 36, and described  
in “Changing the Detector options” on page 36.  
You can optimize the performance of the Detector; that is, you should consider  
doing the following:  
v Pausing the collection of data during peak workloads. You can continue the  
collection of data when the workloads have decreased.  
v Collecting data for one affinity type at a time. This can be of particular value for  
the temporary storage affinity type.  
v Collecting data for a restricted set of transaction identifiers by specifying the  
prefix of those transactions in which you are interested.  
For information about how to specify the affinity types and transaction identifier  
prefix for which data is to be collected, see “Changing the Detector options” on  
page 36.  
© Copyright IBM Corp. 1994, 1999  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31  
 
Displaying the Detector control screen  
To display the control screen that you can use to run the Detector at a CICS  
terminal, first type the transaction identifier CAFF, then press Enter. In response, the  
Detector control screen, CAFF01 (shown in Figure 6), is displayed. You can use this  
screen to review and change the state of the Detector, or to display the Detector  
options screen, CAFF02 (shown in Figure 7 on page 36).  
To refresh the values displayed on the screen at any time, press Enter.  
To leave the Detector control screen, press the F3 (or F12) function key. This does  
not affect the state of the Detector.  
CAFF01  
CICS Transaction Affinities Utility  
Applid CICSPDN1  
Press Start key (F5) to start detection. „1ꢀ  
Press Options key (F4) to modify the CAFF operation options.  
Press Enter to update statistics.  
CAFF state . . . . . . . . : STOPPED by user <userid> „2ꢀ  
Number of pauses . . . . . : 0  
Number of saves. . . . . . : 6  
„3ꢀ  
„3ꢀ  
Records written last save. : 257 „4ꢀ  
Total records on file. . . : 834 „5ꢀ  
Date/time of last start. . : 11/24/95 09:05:23 (MM/DD/YY HH:MM:SS) „6ꢀ  
Date/time of last save . . : 11/24/95 11:13:12 (MM/DD/YY HH:MM:SS)  
Date/time of last change . : 11/24/95 11:12:34 (MM/DD/YY HH:MM:SS)  
Total time RUNNING . . . . : 0002:08:12 (HHHH:MM:SS) „7ꢀ  
Total time PAUSED. . . . . : 0000:00:00 (HHHH:MM:SS)  
Table dataspace name . . . :  
„9ꢀ  
% full „8ꢀ  
F1=Help F3=Exit F4=Options F5=Start F6=Stop F7=Pause F8=Continue F12=Cancel „10ꢀ  
Figure 6. Detector control screen, CAFF01  
The Detector control screen, CAFF01, shows the following:  
„1ꢀ The functions that you can select from this state of the Detector. For any state  
of the Detector, only appropriate functions are displayed.  
„2ꢀ The current state of the Detector. If the state is STOPPED, the display shows  
the reason why it was stopped.  
Notes:  
1. When you stop the Detector, the CAFF state changes to STOPPED only after  
the Detector has saved the affinity data.  
2. When you pause the Detector, the CAFF state changes to PAUSED before the  
Detector saves the affinity data (to ensure that the Detector pauses  
immediately). After the state has changed to PAUSED, you can refresh the data  
displayed by pressing Enter.  
„3ꢀ The number of times that the Detector has been paused, and the number of  
times data has been saved, since the last time that it was started.  
|
|
„4ꢀ The number of new records and updates to existing records written to the  
affinity data VSAM files when data was last saved.  
32 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
„5ꢀ The total number of affinity records in the affinity data VSAM files. If the  
Detector was stopped by CICS crashing, and was in the middle of saving affinity  
data, this figure may be inaccurate. However, the figure is corrected the next time  
the Detector is started.  
„6ꢀ The date and time when the Detector was last started, data was saved, and a  
change was made to an affinity table. The date is given in the format specified by  
the DATFORM system initialization parameter.  
„7ꢀ The total time that the Detector has been in the running and paused states  
since it was last started.  
„8ꢀ The name, and current percentage occupied, of the MVS dataspace being  
used. (This is not displayed while in STOPPED state.)  
„9ꢀ The message line used to display diagnostic messages.  
„10ꢀ The keys that you can use to select functions to affect the operation of the  
Detector, or to get help information about it. This line displays all possible functions,  
not all of which are appropriate (or selectable) for a given state of the Detector.  
Starting the collection of affinity data  
When you can start collecting affinity data  
You can start collecting affinity data only when the Detector is currently  
stopped.  
To start collecting affinity data, use one of the methods shown in Table 3.  
Table 3. Methods for starting data collection by the Detector  
Where used  
Command or function key  
F5 function key „1ꢀ  
Control display, CAFF01  
3270 terminal  
CAFF START  
Console  
F cicsjob, CAFF START „2ꢀ  
EXEC CICS START TRANSID(’CAFF’) FROM(’START’) „3ꢀ  
Application program  
Notes:  
„1ꢀ If you press the F5 function key of the CAFF01 screen, you are asked to  
confirm that you want to start the recording of affinity data.  
„2ꢀ cicsjob is the name of your CICS startup job.  
„3ꢀ You can use this command from a program initiated during the third stage of  
CICS initialization: that is, a program specified in the second part of the PLTPI list  
for the CICS region. For more information about using PLTPI programs, see the  
CICS Customization Guide.  
Using one of the methods listed in Table 3 causes the Detector to record  
transaction affinities in the CICS region, until you pause or stop data collection by  
the Detector. Data is collected for only the affinity types that you have chosen to be  
detected (by specifying Y for the affinity type on the CAFF02 screen).  
Chapter 5. Running the Detector 33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Each time the Detector is started, a new data space is created. For help with  
calculating the likely data space storage requirement, see “Estimating the size of  
the MVS data space and VSAM files” on page 21. You specify this size on the  
Detector options screen, CAFF02. You can also specify that data from affinity data  
VSAM files (for example, from previous Transaction Affinities Utility runs) is to be  
loaded into the data space when it is created. For more information about the  
CAFF02 options screen, see “Changing the Detector options” on page 36.  
Note: If there are a large number of data records to be loaded into the data space  
when it is created (for example, from previous Transaction Affinities Utility  
runs), the CAFF screen may be frozen for some appreciable time, until the  
records have been loaded.  
Pausing the collection of affinity data  
When you can pause affinity data collection  
You can pause the collection of affinity data only when the Detector is  
currently running.  
To pause the collection of affinity data, use one of the methods shown in Table 4.  
Table 4. Methods for pausing data collection by the Detector  
Where used  
Command or function key  
F7 function key  
Control display, CAFF01  
3270 terminal  
CAFF PAUSE  
Console  
F cicsjob, CAFF PAUSE „1ꢀ  
EXEC CICS START TRANSID(’CAFF’) FROM(’PAUSE’)  
Application program  
Note:  
„1ꢀ cicsjob is the name of your CICS startup job.  
Using one of the methods listed in Table 4 causes the Detector to stop collecting  
data until you are ready to resume. The data already collected remains in the data  
space, and can be saved to the affinity data VSAM files when the Detector is  
paused. (You can specify that data be saved when the Detector is paused on the  
CAFF02 options screen, as described in “Changing the Detector options” on  
page 36.)  
Resuming the collection of affinity data  
When you can resume collecting affinity data  
You can resume collecting affinity data only when the Detector is currently  
paused.  
To resume collecting affinity data, use one of the methods shown in Table 5 on  
page 35.  
34 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Table 5. Methods for resuming data collection by the Detector  
Where used  
Command or function key  
Control display, CAFF01  
3270 terminal  
F8 function key  
CAFF CONTINUE  
Console  
F cicsjob, CAFF CONTINUE „1ꢀ  
EXEC CICS START TRANSID(’CAFF’) FROM(’CONTINUE’)  
Application program  
Note:  
„1ꢀ cicsjob is the name of your CICS startup job.  
Using one of the methods listed in Table 5 causes the Detector to continue  
recording any transaction affinities in the CICS region, until you pause or stop data  
collection.  
Stopping the collection of affinity data  
When you can stop collecting affinity data  
You can stop collecting affinity data only when the Detector is currently  
running or paused.  
To stop collecting affinity data, use one of the methods shown in Table 6.  
Table 6. Methods for stopping data collection by the Detector  
Where used  
Command or function key  
F6 function key „1ꢀ  
Control display, CAFF01  
3270 terminal  
CAFF STOP  
Console  
F cicsjob, CAFF STOP „2ꢀ  
EXEC CICS START TRANSID(’CAFF’) FROM(’STOP’) „3ꢀ  
Application program  
Notes:  
„1ꢀ If you press the F6 function key of the CAFF01 screen, you are asked to  
confirm that you want to stop the recording of affinity data.  
„2ꢀ cicsjob is the name of your CICS startup job.  
„3ꢀ You can use this command from a program initiated during the first quiesce  
stage of CICS shutdown, that is, a program specified in the first half of the PLT for  
CICS shutdown. This is recommended, to prevent the Detector delaying CICS  
shutdown if the Detector is not in the STOPPED state. For more information about  
using PLTSD programs, see the CICS Customization Guide.  
Using one of the methods in Table 6 stops the Detector recording any transaction  
affinities in the CICS region until you next start collecting data by the Detector. This  
also destroys the data space, and saves the data collected to the affinity data  
VSAM files.  
Chapter 5. Running the Detector 35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Note: If there are a large number of data records to be saved, the CAFF screen  
may be frozen for some appreciable time, until the records have been saved.  
You may want to stop the Detector when it has detected all affinities. This is  
indicated by the “Date/time of last change” field changing very infrequently and, if  
the optional periodic saves are performed, the “Records written last save” field  
being consistently near zero.  
If CICS shuts down normally, but the Detector is not stopped, the Detector  
eventually detects that CICS is not running and terminates cleanly with a save.  
Changing the Detector options  
You can control how the Detector operates by changing the options that it uses.  
Option values are preserved in the Transaction Affinities Utility control file,  
CAUCNTL, so that they can be used across separate runs of the Detector. For  
more information about the control file, see “The control record VSAM file” on  
page 17.  
Notes:  
1. Generally, any option can be changed while the Detector is stopped. However,  
some options can also be changed while the Detector is paused or running.  
(These options are identified in the descriptions on page 37.)  
2. You can change an option even if the Detector is stopped and the Reporter is  
running (that is, reading the CAUCNTL file).  
To review and change the options that the Detector uses, press the F4 function key  
of the Detector control screen, CAFF01. In response, the Detector displays its  
options screen, CAFF02 (shown in Figure 7) is displayed.  
To update the options screen, press Enter.  
To return to the Detector control screen, press the F12 function key.  
CAFF02  
CAFF Operation Options  
Applid CICSPDN1  
Modify the options and press Enter to update, or press Cancel (F12)  
Control options „1ꢀ  
Perform periodic saves . . . . . . Y  
Restore data on start. . . . . . . N  
Multiple signon with same userid . N  
(Y=Yes or N=No)  
(Y=Yes or N=No)  
(Y=Yes or N=No)  
Size of dataspace. . . . . . . . . 16 (10 to 2000 MB)  
Transid prefix (optional). . . . . ___ (1 to 3 characters)  
Detect affinity types (Y=Yes or N=No) „2ꢀ  
Inter-transaction  
ENQ, DEQ . . . . Y  
TS Queue . . . . Y  
ADDRESS CWA. . . Y  
RETRIEVE WAIT. . Y  
LOAD . . . . . . Y  
GETMAIN SHARED . Y  
CANCEL . . . . . Y  
Transaction-system  
INQUIRE, SET . . . Y  
ENABLE, DISABLE. . Y  
EXTRACT. . . . . . Y  
COLLECT STATS. . . Y  
PERFORM. . . . . . Y  
RESYNC . . . . . . Y  
Transaction-system  
WAIT . . . . . . . Y „3ꢀ  
DISCARD. . . . . . Y  
CREATE . . . . . . Y  
Last updated by <userid> on 11/24/95 09:04:35 „4ꢀ  
F1=Help „5ꢀ  
F12=Cancel  
Figure 7. Detector options screen  
36 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The Detector options screen, CAFF02, shows the options available to you. You can  
change an option only when the Detector has stopped, unless one of the notes that  
follow says otherwise.  
Notes:  
„1ꢀ The control options:  
v Perform periodic saves  
Whether or not you want the affinity data collected to be saved to the affinity data  
VSAM files if either:  
– More than 300 seconds has passed, or more than 1000 table elements have  
changed, since the last save  
– You paused the Detector  
(The autosave transaction, CAFB, writes the affinity data to the affinity data  
VSAM files automatically when you stop the Detector.)  
Note: This option can be changed while the Detector is stopped, paused, or  
running.  
v Restore data on start  
Whether or not you want the affinity data to be restored from the affinity data  
VSAM files when the Detector is started. This enables affinity data to be added to  
the data collected from previous runs of the Detector. If you are gathering data  
use this:  
– For one set of transaction identifiers at a time  
– For one set of commands at a time  
– If the Detector is being run at varying times  
It is also of particular value if the Detector terminates unexpectedly, because you  
do not have to start collecting affinity data all over again; you can start from the  
last time data was saved.  
Notes:  
1. The data restored is only for those affinity types that you have chosen to be  
detected (by specifying Y for the affinity type on the CAFF02 screen).  
Data is kept on file for all commands, but only the data for the commands  
that you have selected to be detected may change, and therefore is restored.  
2. You can change this option while the Detector is stopped, paused, or running.  
v Multiple signon with the same userid  
Whether or not your conventions allow for more than one user to be signed on to  
CICS with the same userid at the same time. If so, set the multiple signon with  
same userid to Y; otherwise, the Detector may incorrectly deduce some affinity  
lifetimes and create erroneous affinity transaction groups (also known as affinity  
groups). This includes conventions where more than one user is simultaneously  
not signed on; that is, they all take the default userid CICSUSER.  
Also, if you are running the Detector in an AOR, the userids examined depend on  
whether the userid is propagated from the TOR, or derived from the SESSION  
and CONNECTION resource definitions. In the last case, you should set the  
multiple signon option to Y if your conventions allow the same AOR userids to be  
signed on to CICS at the same time.  
It is very important that this option is set correctly. If you are about to start a new  
run of the Detector, and intend restoring data from the affinity data VSAM files,  
Chapter 5. Running the Detector 37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
ensure that this option is the same as that used in the previous run of the  
Detector (for which affinity data is to be restored).  
v Size of dataspace  
The size that you want to use for the data space to store the affinity data  
collected. The size of the data space is fixed for a run of the Detector. For  
information about estimating the size of the data space, see “Estimating the size  
of the MVS data space and VSAM files” on page 21.  
If the data space becomes full when running, the Detector terminates with abend  
code AUXB.  
If you are saving affinity data, there may be a delay from the time the data space  
became full until the time the Detector actually terminated.  
v Transid prefix  
The prefix (zero through three characters) of the transactions for which you want  
to gather affinity data, If you do not specify any characters, affinity data is  
collected for all transactions. If you specify a valid prefix (for example, AB_),  
affinity data is collected for only those transactions with identifiers starting with  
the prefix.  
Leading and trailing blanks are ignored, but embedded blanks are treated as an  
error.  
„2ꢀ Detect affinity types  
Whether or not the Detector is to detect the types of affinities listed.  
For more information about restrictions affecting the detection of affinity commands,  
see “The Detector component” on page 12 and “Appendix A. Details of what is  
detected” on page 65.  
„3ꢀ Transaction system  
WAIT commands are listed as transaction-system affinities, because only half the  
affinity can be detected. (The other half, an MVS POST command or hand posting,  
cannot be detected.) You should investigate such affinities further, and, if needed,  
change the output from the Reporter to create basic affinity transaction groups for  
them.  
„4ꢀ Last update by <userid>  
The date and time when the options were last updated, and the userid of the user  
who made the updates.  
The date is displayed in the format defined by the DATFORM system initialization  
parameter.  
„5ꢀ Help  
Pressing PF1 for help does not save any changes made; you must press the Enter  
key to save changes.  
38 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Detector errors  
If the CAFF or CAFB transaction, or an exit program, encounters a serious error,  
the Detector stops by terminating CAFF and CAFB with one of the following  
termination codes:  
v A code in the AUxx range accompanied by messages on the CAFF transient data  
queue that indicate the cause of the error  
v A code not in the AUxx range, presumably being one of the other CICS  
transaction abend codes  
For a description of the code, see the CICS Messages and Codes manual.  
If the CAFF transaction stops with code ATCH, ATNI, or AKCT, the Detector  
continues to collect affinity data. For all other codes from either the CAFF or CAFB  
transaction, the Detector is stopped. The Detector should stop cleanly; so, after  
performing the actions suggested by the message explanations, you should be able  
to restart the Detector.  
If a program check or MVS abnormal termination occurs in an exit program, it  
results in an abnormal termination of the transaction that caused the exit to be  
invoked. This probably indicates a problem with the Detector. Use the CAFF  
transaction to stop the Detector, and contact your IBM Support Center if the  
evidence points to the Detector being at fault.  
If the termination code is AICA, this may be caused by the Detector scanning the  
table of affinity data when the amount of affinity data is very large. You can prevent  
this by increasing the value of the ICVR system initialization parameter.  
Chapter 5. Running the Detector 39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
40 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6. Running the Reporter  
This chapter describes how to run the Reporter that runs as a batch job to produce  
a report of the affinities found by the Detector. The commands reported on are  
those listed in “Commands detected by the Transaction Affinities Utility” on page 11.  
For information about interpreting the report output by the Reporter, see “Using the  
affinity report” on page 47.  
You can run the Reporter to produce a report of the affinities found in your CICS  
region and definitions for the basic affinity transaction groups that correspond to the  
report. The definitions for the basic affinity transaction groups are suitable for input  
to the Builder.  
This chapter contains the following information:  
v “Requesting a report from the Reporter”  
v “Output from the Reporter” on page 42  
v “Using the affinity report” on page 47  
v “Compressing affinity data” on page 49  
v “Using the IBM Cross System Product” on page 50  
Requesting a report from the Reporter  
You can request a report from the Reporter by editing and running the job,  
CAUJCLRP. Before running the CAUJCLRP job, change the following as  
appropriate:  
v The JOB accounting parameters  
v The PARM parameter of the EXEC statement  
For example:  
REPORT EXEC PGM=CAUREP,PARM='WORSEN=YES'  
[WORSEN={YES|NO}]  
Specify whether the Reporter is to worsen transaction affinity relations for  
those affinities where the Detector has not detected at least 10 occurrences.  
For more information about worsened relations, see “Worsening of  
transaction affinities relations” on page 14.  
v The STEPLIB DD statement  
Specify the name of the Transaction Affinities Utility load library where you have  
installed the Reporter program, CAUREP.  
v The CAUAFF1, CAUAFF2, and CAUAFF3 DD statements  
Specify the names of your affinity data VSAM files for this CICS region.  
Note: Each of the CAUAFF1, CAUAFF2, and CAUAFF3 files has a header  
record specifying the applid of the CICS region that created the record.  
The Reporter checks these applids against the applid recorded in the  
CAUCNTL file, and proceeds only if all four applids are the same.  
v The CAUCNTL DD statements  
Specify the name of your Transaction Affinities Utility control VSAM file for this  
CICS region.  
© Copyright IBM Corp. 1994, 1999  
Download from Www.Somanuals.com. All Manuals Search And Download.  
41  
 
v The CMDGRPS DD statement  
Specify the affinity (command) types you want to see in the report. Only those  
affinity types listed on this DD statement are shown in the report. (The types  
correspond exactly to the type options on the CAFF02 screen.) You can specify  
any of the following affinity types, with each type on a separate line, starting in  
column one:  
CANCEL  
COLLECT  
CREATE  
CWA  
ENABLE  
ENQ  
EXTRACT  
GETMAIN  
INQUIRE  
LOAD  
PERFORM  
RESYNC  
RETRIEVE  
TS  
DISCARD  
If you do not specify any affinity types on the CMDGRPS DD statement, or  
specify CMDGRPS DD DUMMY, all affinity types are selected for reporting.  
The first part of the report lists the affinity types selected.  
v The TRANGRPS DD statement  
Specify the name of the sequential data set where the basic affinity transaction  
groups are to be sent.  
v The SYSPRINT DD statement  
Specify the destination for the report.  
Note: The Reporter cannot read records from the CAUAFF1, CAUAFF2, and  
CAUAFF3 VSAM files while the Detector has those files opened for update.  
Therefore, do not run the Reporter at the same time as the Detector.  
Output from the Reporter  
For each affinity type specified on the CMDGRPS DD statement, the Reporter  
outputs each individual affinity both in report format and as definitions for basic  
affinity transaction groups suitable for input to the Builder.  
Notes:  
1. The Reporter outputs basic affinity transaction group definitions for  
inter-transaction affinity transaction groups only.  
|
|
|
|
|
2. Transactions not initiated from a terminal do not appear in a basic affinity  
transaction group. If none of the transactions in an inter-transaction affinity  
group were initiated from a terminal, a special reporting affinity relation of  
Background is used; no basic affinity transaction group is created, and you  
should ignore the affinity lifetime.  
42 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Affinity report  
Figure 8 shows an example report for two affinities, a TS queue affinity and a CWA  
affinity. These were the only affinity types selected, as shown.  
CICS TRANSACTION AFFINITIES UTILITY  
AFFINITY TYPE REPORTING OPTIONS  
1995/11/24 Page  
1
Applid=CICSPDN1  
Affinity Type  
-------------  
„1ꢀ  
Reporting  
---------  
Message  
--------------------------------------  
Inter-Transaction Affinities „2ꢀ  
----------------------------  
CWA  
CANCEL  
ENQ  
Yes  
No  
No  
GETMAIN  
LOAD  
RETRIEVE  
TS  
No  
No  
No  
Yes  
Transaction-System Affinities  
-----------------------------  
COLLECT  
DISCARD  
ENABLE  
EXTRACT  
INQUIRE  
PERFORM  
RESYNC  
WAIT  
No  
No  
No  
No  
No  
No  
No  
No  
No  
CREATE  
Figure 8. A sample report output by the Reporter (Part 1 of 4)  
CICS TRANSACTION AFFINITIES UTILITY  
INTER-TRANSACTION AFFINITIES REPORT FOR ADDRESS CWA  
1995/11/24 Page 2 „3ꢀ  
Applid=CICSPDN1  
Trangroup  
Affinity  
Lifetime  
Tranid  
------  
AUXX  
:
:
:
CW.00000001  
GLOBAL  
SYSTEM  
Program  
--------  
AUXXTST  
AUCWA  
Offset  
Usage  
------  
Command  
----------- --------  
ADDRESS CWA  
Terminal  
BTS Task  
---------  
Yes  
--------  
000000CC  
FFFFFFFF  
1
2
Yes  
Yes  
CWA1  
No  
Total Transactions  
Total Programs  
:
:
2
2
Figure 8. A sample report output by the Reporter (Part 2 of 4)  
Chapter 6. Running the Reporter 43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CICS TRANSACTION AFFINITIES UTILITY  
INTER-TRANSACTION AFFINITIES REPORT FOR TEMPORARY STORAGE COMMANDS  
1995/11/24 Page 3 „3ꢀ  
Applid=CICSPDN1  
Trangroup  
Affinity  
Lifetime  
Queue  
Recoverable  
Terminal Id  
:
:
:
:
:
:
TS.00000001  
LUNAME  
PCONV  
LOCA1  
No  
(D3D6C3C1F1404040)  
(MAIN)  
(E5F1F0F2)  
V102  
Tranid  
------  
AFTD  
AFTR  
AFTW  
Program  
--------  
AFFYTSD  
AFFYTSR  
AFFYTSW  
Total Transactions  
Total Programs  
Offset  
Command  
--------  
DELETEQ  
READQ  
WRITEQ  
:
Usage  
------  
43  
Terminal  
--------  
Yes  
BTS Task  
---------  
Yes  
--------  
0000012E  
000002BE  
00000260  
43  
43  
Yes  
Yes  
No  
Yes  
3
3
:
Figure 8. A sample report output by the Reporter (Part 3 of 4)  
Trangroup  
Affinity  
Lifetime  
Queue  
Recoverable  
Terminal Id  
:
:
:
:
:
:
TS.00000002  
LUNAME  
PCONV  
LOCA2  
No  
(D3D6C3C1F2404040)  
(MAIN)  
(E5F1F0F2)  
V102  
Tranid  
------  
AFTD  
AFTR  
AFTW  
Program  
--------  
AFFYTSD  
AFFYTSR  
AFFYTSW  
Total Transactions  
Total Programs  
Offset  
Command  
--------  
DELETEQ  
READQ  
WRITEQ  
:
Usage  
------  
39  
BTS Task  
--------  
Yes  
Terminal  
---------  
Yes  
--------  
0000012E  
000002BE  
00000260  
39  
39  
No  
Yes  
Yes  
Yes  
3
3
:
Figure 8. A sample report output by the Reporter (Part 4 of 4)  
Notes for Figure 8:  
„1ꢀ Incorrect affinity types  
This lists any affinity types that were specified incorrectly on the CMDGRPS DD  
statement of the CAUJCLRP job.  
„2ꢀ Affinity types reported  
This lists any affinity types that were selected for reporting; that is, those affinity  
types specified correctly on the CMDGRPS DD statement of the CAUJCLRP job.  
The affinity types are listed under their associated affinity category: inter-transaction  
and transaction-system.  
„3ꢀ Affinities reports  
For each affinity transaction group, a report lists appropriate characteristics of the  
affinities, as given in the following notes.  
Trangroup  
The name of the affinity transaction group, assigned by the Reporter. This  
name is used only to cross-reference the group to the corresponding affinity  
transaction group in the data set specified on the TRANGRPS DD  
statement for this run of the Reporter.  
44 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note: The Trangroup value for an affinity transaction group may vary from  
one run to another of the Detector or Reporter.  
Affinity  
The affinity relation. If appropriate, this also indicates whether the relation  
was worsened from a less restrictive relation. For more information about  
worsened relations, see “Worsening of transaction affinities relations” on  
page 14.  
Lifetime  
The affinity lifetime. If appropriate, this also indicates whether the lifetime  
was worsened from a less restrictive lifetime. For more information about  
worsened lifetimes, see “Worsening of transaction affinities lifetimes” on  
page 14.  
Queue (resource)  
The resource causing the affinity. This may be the name of the resource  
(for example, Queue : LOCA1 (D3D6C3C1F1404040) as shown) or the address  
of the resource, depending on the type of affinity.  
Note: An unprintable character appears as a period (.).  
Recoverable  
Whether or not the resource is recoverable. For TS queues, this also  
indicates whether the queue is in auxiliary or main temporary storage.  
Terminal Id  
The identifier of the terminal where the transactions taking part in the affinity  
were initiated. This information is available only for TS queue affinity, and is  
meaningful only if the affinity is LUNAME or worsened from LUNAME to  
GLOBAL. Therefore, the terminal identifier is included in the report only in  
these cases.  
Tranid The identifier of each transaction taking part in the affinity. It is possible for  
an affinity transaction group to contain only one tranid. An example of such  
a situation is where each part of a pseudoconversation accesses a TS  
queue, and each part runs under the same tranid.  
Program  
The name of each program taking part in the affinity.  
Offset The offset from the load point of the BALR instruction at the EXEC CICS  
command causing the affinity. The Reporter outputs a negative offset  
(X'FFFFxxxx') if it could not determine an offset; that is, if the offset  
calculated is not within the program. This may indicate that the program (or  
perhaps language run-time code) has passed control to another program by  
using a non-CICS mechanism (for example, a VS COBOL II dynamic call).  
Notes:  
1. This offset is not the same as the offset given by the Scanner, which is  
the offset of the command argument 0 declaration from the start of the  
load module. (See page 71.)  
2. If a negative offset (X'FFFFxxxx') is used, it is not possible to directly  
locate individual affinity commands within a program. The program must  
be scanned for every instance of the affinity command, as there may be  
more than one.  
Command  
The EXEC CICS command causing the affinity.  
Chapter 6. Running the Reporter 45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Usage The number of times that this particular EXEC CICS command (with the  
transaction, program, and offset values reported) taking part in the affinity,  
up to a limit of 5000.  
Note: The usage count is an indication of the relative importance of the  
affinity, and is not a completely accurate usage count. For  
performance reasons, when the usage count is incremented by the  
Detector, the “save to file” flag is not necessarily set to indicate that  
the record needs to be saved to the data file. The save flag is set as  
follows:  
0
<= usage count < 10,  
save flag set every increment  
10 <= usage count < 100, save flag set every 10 increments  
100 <= usage count < 5000, save flag set every 100 increments  
5000 <= usage count,  
neither increment nor save flag set  
If the usage count is ’1+’, it means that at least one example of the affinity  
was seen but that the total number of occurrences of that affinity is  
unknown.  
Terminal  
Whether this particular EXEC CICS command (with the transaction,  
program, and offset values reported) was ever issued by a transaction  
initiated from a terminal; that is, started as a result of terminal input or for  
an EXEC CICS RETURN TRANSID command. (This does not include  
ATI-started transactions.)  
|
|
|
|
The word Mix in this column is used to indicate that a particular EXEC  
CICS command was issued by a transaction initiated from a terminal and  
also issued by the transaction when it was initiated with no associated  
terminal.  
|
|
BTS Task  
Whether it is a CICS BTS task or not.  
Total Transactions  
The total number of different transactions in the affinity transaction group.  
Total Programs  
The total number of different programs in the affinity transaction group.  
Producing affinity transaction group definitions  
The Reporter produces affinity transaction group definitions suitable for input to the  
Builder (but not to CICSPlex SM). Each definition consists of a unique transaction  
group name, a relation, a lifetime, and a set of tranids.  
Not everything that appears in the report appears as an affinity transaction group. In  
particular, transaction-system affinities do not appear, because they are not of  
interest to a dynamic routing program; nor do transactions that were not initiated  
from a terminal (for the same reason).  
Figure 9 on page 47 shows a sample set of definitions to match the report in  
Figure 8 on page 43.  
Notes:  
1. The transaction group name is not a valid CICSPlex SM transaction group  
name, because the latter must be eight characters; it is used only as a  
cross-reference to the report.  
46 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2. MATCH or STATE attributes are not generated on CREATE TRANGRP  
commands, because those attributes are relevant only to the combined affinity  
transaction groups. For more information about MATCH and STATE attributes,  
see page 55.  
3. The HEADER statement is generated so that the Builder can detect a new data  
set in its input concatenation. It also gives the CICS applid, and the date and  
time of the last Detector save, all obtained from the CAUCNTL control file. For  
more information about HEADER statements, see “HEADER statements” on  
page 58.  
* HEADER APPLID(CICSPDN1) SAVEDATE(95/11/24) SAVETIME(10:11:45);  
*
* Generated by the CICS Transaction Affinities Utility (Reporter) on 1995/11/25  
* Note: NOT suitable for input to CICSPlex SM  
*
CREATE TRANGRP NAME(CW.00000001) AFFINITY(GLOBAL) AFFLIFE(SYSTEM  
DESC(ADDRESS CWA );  
)
CREATE DTRINGRP TRANGRP(CW.00000001) TRANID(AUXX);  
CREATE DTRINGRP TRANGRP(CW.00000001) TRANID(CWA1);  
*
CREATE TRANGRP NAME(TS.00000001) AFFINITY(LUNAME) AFFLIFE(PCONV  
DESC(TS.LOCA1 D3D6C3C1F1404040 );  
)
CREATE DTRINGRP TRANGRP(TS.00000001) TRANID(AFTD);  
CREATE DTRINGRP TRANGRP(TS.00000001) TRANID(AFTR);  
CREATE DTRINGRP TRANGRP(TS.00000001) TRANID(AFTW);  
*
CREATE TRANGRP NAME(TS.00000002) AFFINITY(LUNAME) AFFLIFE(PCONV  
DESC(TS.LOCA2 D3D6C3C1F2404040 );  
)
CREATE DTRINGRP TRANGRP(TS.00000002) TRANID(AFTD);  
CREATE DTRINGRP TRANGRP(TS.00000002) TRANID(AFTR);  
CREATE DTRINGRP TRANGRP(TS.00000002) TRANID(AFTW);  
Figure 9. Sample basic affinity transaction group definitions  
Once these definitions have been created, you can edit them to add extra  
definitions for affinities that the Detector could not detect, or to modify definitions in  
the light of further knowledge about the affinity (for example, to correct a worsened  
lifetime). The report output from the Scanner may be particularly useful at this  
stage. (See “Using the affinity report”.)  
Using the affinity report  
The affinity report has two main purposes:  
1. To help you understand the affinities present in the CICS region concerned.  
2. To help you modify the affinity transaction group definitions before they are input  
to the Builder, if such modification is required.  
You need to be able to investigate whether any application changes could reduce  
the amount of affinity.  
Notes:  
1. Assume that the affinity information is complete.  
|
|
|
2. Assume that any worsening of affinity relation or affinity lifetime by the Detector  
does not create too pervasive an affinity (this makes dynamic routing less  
effective).  
Chapter 6. Running the Reporter 47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Understanding the affinities  
The inter-transaction affinities listed in the report highlight those transactions that  
have affinities with other transactions.  
Understanding the affinities present in the CICS region enables you to determine  
which of the them are most pervasive. If you decide that it is worth changing your  
application programs, it is generally more cost-effective to remove the most  
pervasive affinities, because those affinities most restrict dynamic routing. The most  
pervasive affinities are those with a relation of GLOBAL, or a lifetime of SYSTEM or  
PERMANENT, and are heavily used.  
|
The transaction-system affinities listed in the report highlight those transactions that  
use system programming commands. It may not be appropriate to dynamically  
route such a transaction, because its action may be tied to a particular CICS region  
(as opposed to a particular set of other transactions).  
The affinity report also lists affinities occurring between transactions that were not  
initiated from a terminal or are not CICS BTS transactions. These background  
transactions are known as background relations. This information is really for  
completeness, because such transactions cannot be dynamically routed.  
|
To get complete information on affinities, use as many code paths as possible while  
running the Detector, because it can find an affinity only if the commands that cause  
it have been executed. However, the Scanner detects all instances of affinity  
commands in the corresponding load library. So a comparison of the Reporter and  
Scanner outputs is very useful when establishing the full picture.  
Important note  
Both the Reporter and Scanner may identify commands that, on closer  
examination, do not cause real affinities. Relate the output from the Reporter  
and the Scanner to your knowledge of your applications, to distinguish  
between such commands and those causing real affinities that impact CICS  
dynamic routing.  
|
For more information about interpreting the affinity report, see “Appendix C. Useful  
tips when analyzing Transaction Affinities Utility reports” on page 75.  
Modifying affinity transaction groups  
Consider making the following modifications to the affinity transaction groups before  
inputting them to the Builder:  
v Remove false affinities  
False affinities may arise because the sharing of a resource is done on a  
read-only basis, so it is possible for the resource to be replicated across cloned  
CICS regions. The prime example of this is a read-only CWA, where the CWA is  
set up at CICS startup (for example, from a PLTPI program), and only ever read  
thereafter. (An alternative way of removing this false affinity is to prohibit  
detection of ADDRESS CWA by the Detector using the CAFF options.)  
v Remove affinity relation worsening  
|
An affinity that has a relation of LUNAME, BAPPL,or USERID may be worsened  
to GLOBAL because the Detector has not seen enough examples of the affinity  
48 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
to be convinced that it is related to a terminal or userid. Change this to LUNAME  
or USERID (and correct the lifetime) if you know that the affinity really is terminal-  
or userid-related. You may want to prevent worsening by specifying  
WORSEN=NO.  
v Remove affinity lifetime worsening  
An LUNAME affinity with a lifetime of LOGON, or a USERID affinity with a  
lifetime of SIGNON, may be worsened to SYSTEM or PERMANENT because the  
Detector cannot always observe log offs or sign offs. Change this to LOGON or  
SIGNON if you know that to be the correct lifetime.  
v Change LUNAME affinity relation to USERID  
An LUNAME affinity group may be both LUNAME and USERID, because all  
instances of all transactions in the group were initiated from the same terminal by  
the same userid. This appears in the report as LUNAME, because LUNAME  
takes precedence. If you know that the affinity is primarily userid-related, change  
the affinity to USERID. (This may be indicated by other, similar, affinity groups  
appearing in the report with USERID.)  
v Add WAIT affinities  
The Reporter reports the use of WAIT EVENT, WAITCICS, and WAIT  
EXTERNAL commands as transaction-system affinities, because the Detector  
cannot detect the corresponding posting of the ECBs being waited upon. Identify  
the posting transactions and create affinity transaction groups to describe the  
affinities. The output from the Scanner may be particularly useful here, because it  
finds programs that issue MVS POST commands.  
v Add other affinities  
Scanner output or your knowledge of your applications may identify additional  
affinities. Create affinity transaction groups to describe them.  
v Add GETMAIN storage sharers  
The Detector cannot detect transactions that share storage other than via EXEC  
CICS commands. Although it detects GETMAIN SHARED/FREEMAIN affinities,  
the address of the storage may have been passed to a third transaction. Add  
such transactions to the affinity transaction group.  
Compressing affinity data  
If your temporary storage queue names contain a unique counter or a termid, a  
very large number of basic affinity transaction groups may be created for what may  
seem to be a small number of logical queues. For example, consider the queues  
ABCD0001 through ABCD1000, whose names comprise a fixed part (ABCD) and a  
counter (0001 through 1000). They may result in 1000 basic affinity transaction  
groups, each with relation, LUNAME, lifetime PCONV, and transactions ABCD and  
ABCE. This is one logical queue, ABCD*, which causes an affinity that may be  
described by one affinity transaction group. However, the result is 1000 basic  
affinity transaction groups.  
The affinity data may be more readable if compressed to its logical form. You can  
use the Builder to do this, because it combines all affinity transaction groups that  
contain the same transaction ID. The Builder output for the previous example would  
be one affinity transaction group with relation LUNAME, lifetime PCONV, and  
transactions ABCD and ABCE.  
Chapter 6. Running the Reporter 49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using the IBM Cross System Product  
The following information about the IBM Cross System Product (CSP) 4GL  
application generator concentrates on tests carried out running CSP 3.3, but in  
general the information also applies to later releases of CSP.  
There are two components to CSP:  
v CSP/AD (Application Development) is used to develop the applications  
v CSP/AE (Application Environment) is the run-time environment for application  
execution.  
If you use the IBM Cross System Product to develop your applications and, in  
particular, use CSP/AE as the run-time environment for the applications, the  
Reporter report will contain a large number of transaction groups. These groups are  
created because of the way that CSP/AE uses EXEC CICS commands, and in  
many cases do not cause real affinities.  
Affinity analysis for a CICS region containing CSP 3.3 applications  
When CSP 3.3 is used to develop and execute CICS pseudoconversational  
applications, the main CSP affinity is LUNAME/PCONV TS queue affinity, which can  
be dealt with either by CICSPlex SM or by a queue-owning region (QOR). The only  
other real affinity likely to be encountered is the use of non-read-only CSP shared  
tables, and the scope of this affinity depends on the tables and applications  
involved.  
CSP internally uses these CICS resources and commands in the following ways.  
They can cause transaction affinities, and these appear in the Transaction Affinities  
Utility report.  
ENQUEUEs/DEQUEUEs  
are used to serialize the loading of CSP tables and applications from VSAM  
files called ALFs (application load files). They are also used to serialize writing  
messages to TD destination CSMT.  
Shared storage  
When a CSP application or table or map from an ALF has completed loading, it  
is copied to shared storage. Note that some of these tables may be defined by  
the application developer as SHARED and made resident by the CSP utility  
program ALFUTIL. Such tables may be shared between applications, and may  
be updated.  
Temporary storage queues  
CSP allows division of applications into ’segments’. This is just another name  
for a pseudoconversational application. CSP uses TS to save state data  
between transactions in the pseudoconversation, building the TS queue name  
from the termid to ensure uniqueness.  
SPI commands  
are used to inquire on system attributes such as the version and release of  
CICS in use, to set up and share a user exit global work area (GWA), and to  
obtain file characteristics of the ALFs.  
50 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Detailed affinity analysis  
Each of the above command scenarios is dealt with below. A description of how the  
use of the command appears in the Transaction Affinities Utility Reporter report is  
given, followed by an assessment of any affinity problem it causes. However, it  
would be helpful first to expand on the structure of a CSP segmented application.  
The default CICS transaction identifier that CSP provides for applications is XSPS,  
although this is normally replaced by a unique transid for the application concerned.  
CSP transactions are defined so that the initial program is DCBINIT or DCBRINIT,  
the former for the first segment (that is, the first transaction in a  
pseudoconversation), the latter for subsequent segments. These two CSP programs  
ensure that the correct environment is built for the application, including loading of  
programs and tables and saving and restoring of state data. DCBINIT and  
DCBRINIT branch to other CSP programs, but these other programs are not known  
to CICS. This means the Transaction Affinities Utility Reporter report shows  
DCBINIT or DCBRINIT as the program containing the affinity command, but the  
command offset is the generic x’FFFFFFFF’. In fact, the CSP program that issues  
most EXEC CICS commands is DCBMODS.  
It is very important to note that a single report transaction/program/offset entry can  
conceal several affinity commands. Although the Transaction Affinities Utility  
Detector has correctly logged, and deduced information from, all the commands, it  
is only the first one encountered that is described in full in the report. So the  
Transaction Affinities Utility may report DCBINIT issuing only ENQUEUEs, but in  
reality DCBMODS is issuing both ENQUEUEs and DEQUEUEs. Similarly, the  
Transaction Affinities Utility may report that DCBINIT is issuing only WRITEQ TS  
commands, but in reality DCBMODS is issuing READQ TS and DELETEQ TS as  
well. (The Transaction Affinities Utility Scanner shows that this is indeed the case  
when it is run against the CSP/AE load library.)  
Note that there is a unique generic offset for each different command type within an  
affinity group. The generic offset is zero minus the group/function code for the  
command. So, for example, ENQUEUEs appear with x’FFFFEDFC’, and  
DEQUEUEs appear with x’FFFFEDFA’. This is also the case for other command  
types.  
ENQUEUE/DEQUEUE  
There is an EQ affinity group in the report for each table or application or map that  
is loaded. The resource used in each case starts with ’FZE’ and contains the name  
of the load module concerned. Other resources that may appear are ’FZELOAD’  
and ’FZETUTRI’. The programs involved are DCBINIT and DCBRINIT.  
Upon analysis, this use of ENQUEUE/DEQUEUE does not cause affinity. Here, the  
ENQUEUE/DEQUEUE is being used to serialize a browse on an ALF, so that  
another CSP application in the same CICS region does not interfere with the  
loading process. If multiple CICS regions were cloned, each cloned CICS region  
must perform this same loading process, but this has no effect on any of the other  
CICS regions. So the ENQUEUE/DEQUEUE is not CICSplex wide and does not  
cause affinity. All that is required is to ensure that each CICS has access to the  
ALFs. Because these are used read-only by CSP/AE, the ALFs may be shared  
without resorting to the overhead of function shipping.  
Chapter 6. Running the Reporter 51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
There may also be an EQ affinity group in the report with a resource name of  
CSMT when CSP serializes writing of information to TD destination CSMT. This  
does not cause affinity because each cloned CICS has its own CSMT.  
GETMAIN SHARED  
There is a GM affinity group in the report for each pair of transactions that were  
observed performing GETMAINs and FREEMAINs on shared storage. The  
programs involved are DCBINIT and DCBRINIT.  
Upon analysis, this use of GETMAIN SHARED may cause affinity. It depends on  
the application. If the storage obtained is for a CSP shared table that is  
updated by applications, there will be affinity. Otherwise, there should not be  
affinity, because the program or table concerned is read-only and therefore  
duplicate copies are loaded by each cloned CICS region in the CICSplex.  
The scope of any affinity depends on the use of the shared table by the  
application(s) concerned. The application developer decides this use. But it is  
extremely important to note that the Transaction Affinities Utility can detect only the  
transaction issuing the GETMAIN and the transaction issuing the FREEMAIN, and  
not intermediate transactions sharing the storage.  
Note that unmatched GETMAIN SHARED commands may also appear in the  
report. This means that the Transaction Affinities Utility has seen a GETMAIN  
SHARED but as yet no matching FREEMAIN. The discussion in the rest of this  
section applies in this case also.  
Temporary storage queues  
There are temporary storage (TS) affinity groups in the report for each terminal that  
participated in a pseudoconversation where the transactions involved are developed  
using CSP. The TS queue names are all of the form ’EZExtttt’ where x is either A,  
C, R or T, and tttt is the termid of the terminal concerned. The programs involved  
are DCBINIT and DCBRINIT. The affinity group should be LUNAME/PCONV.  
Upon analysis, this use of TS does cause affinity. Here, CSP is saving state data  
between transactions in the pseudoconversation. But, because the TS queue  
contains the termid of the terminal, the affinity must be LUNAME; that is, terminal  
oriented. And because this technique is applicable only to pseudoconversational  
applications, and the TS queue is deleted by CSP at the end of the  
pseudoconversation, the lifetime must be PCONV. Therefore, there is  
LUNAME/PCONV affinity.  
This affinity may be dealt with by either defining the affinity as LUNAME/PCONV to  
CICSPlex SM (which still permits good workload balancing if the  
pseudoconversations are not excessively long) or, alternatively, by creating a  
queue-owning region (QOR) to which all TS queue requests from all cloned CICS  
regions are function shipped.  
There is an interesting point to note here. Unrelated transactions may appear in the  
same affinity group; that is, it looks as though different applications have shared the  
same TS queue. In fact they have not; they have simply reused the TS queue  
name. This occurs because the TS queue name ’EZExtttt’ is not flexible enough to  
incorporate a unique application identifier. The probable result of this is that the  
Transaction Affinities Utility Builder combines all transactions in all  
pseudoconversational applications into a single affinity group for CICSPlex SM with  
52 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
an affinity of LUNAME and a lifetime of PCONV. The presence of one group rather  
than a group for each application is actually not important. When dynamic routing,  
the affinity still ends when the current pseudoconversation ends, so the effect is  
exactly the same.  
It is useful to have applied the PTF for CSP APAR PN45100, because this adds  
deletion of ’EZExtttt’ TS queues after a transaction abend.  
SPI commands  
There are transaction-system affinities in the report indicating that commands such  
as EXTRACT EXIT and INQUIRE SYSTEM have been used. These are concerned  
with establishing the correct environment for a transaction. The programs involved  
are DCBINIT and DCBRINIT.  
Transaction-system affinity can mean that a transaction is tied to a particular CICS,  
or more likely, as in this case, that the transaction should be run on all cloned CICS  
regions. Because it happens automatically there is no affinity problem. If multiple  
CICS regions are cloned, each cloned CICS region must perform this processing  
and will do so, but this may have no effect on any of the other CICS regions.  
Chapter 6. Running the Reporter 53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
54 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 7. Running the Builder  
This chapter describes how to run the Builder that runs as a batch job to build  
affinity transaction groups suitable for input to the CICS system management  
product, the CICSPlex SM element of CICS Transaction Server for OS/390  
Release 3.  
This chapter contains the following information:  
v “Syntax for input to the Builder” on page 56  
v “Output from the Builder” on page 58  
You can run the Builder to build affinity transaction groups suitable for input to the  
CICS system management product, CICSPlex SM. The Builder takes as input a set  
of files containing basic affinity transaction groups, combines those groups, and  
produces a file containing combined affinity transaction groups. CICSPlex SM  
requires a transaction identifier be in one transaction group only, and the Builder  
satisfies this by combining groups that contain the same transaction identifier.  
Note: You can use the Reporter to produce files of basic transaction affinity groups  
for input to the Builder. The files can be from several runs of the Detector  
(for example, against a production CICS region and a test CICS region), but  
must be for the same workload.  
You can run the Builder by editing and running the job CAUJCLBL. Before running  
the CAUJCLBL job, change the following as appropriate:  
v The JOB accounting parameters  
v The PARM parameter of the EXEC statement  
For example:  
//BUILD  
// PARM=('STATE=ACTIVE,MATCH=LUNAME,DSPSIZE=16',  
// 'CONTEXT=CICPLEX1')  
EXEC PGM=CAUBLD,  
[DSPSIZE={16|number}]  
Specify the size, in the range 2 through 2000 (MB), of the data space  
created internally by the Builder to store the group tables.  
[MATCH={LUNAME|USERID}]  
Specify the filter that CICSPlex SM is to use for workload separation, and  
which applies to all combined affinity groups produced by the Builder.  
[STATE={ACTIVE|DORMANT}]  
Specify whether the combined affinity groups are to be defined as active or  
dormant to CICSPlex SM.  
[CONTEXT=plexname]  
Specify the name, one through eight characters, of a CICSplex. If you specify  
this parameter, the Builder generates a CICSPlex SM CONTEXT statement,  
which enables CICSPlex SM to associate the combined affinity transaction  
groups with a particular CICSplex that it is managing. The default is to not  
generate a CONTEXT statement; in which case, CICSPlex SM assumes the  
local CICS-managed address space (CMAS).  
|
|
For more information about defining transaction groups to CICSPlex SM, see  
CICSPlex SM Managing Business Applications.  
v The STEPLIB DD statement  
© Copyright IBM Corp. 1994, 1999  
Download from Www.Somanuals.com. All Manuals Search And Download.  
55  
 
Specify the name of the Transaction Affinities Utility load library where you have  
installed the Builder program, CAUBLD.  
v The REPGRPS DD statement  
Specify the (concatenation of) names of the sequential data sets containing the  
basic affinity transaction groups to be input to the Builder. The Builder reads the  
lines of the input data sets, and checks them for syntax and logic errors. For  
information about the valid syntax, see “Syntax for input to the Builder”.  
v The AFFGRPS DD statement  
Specify the name of the sequential data set where the combined affinity  
transaction groups are to be sent. This data set is suitable for input to  
CICSPlex SM.  
v The SYSPRINT DD statement  
Specify the destination for the report output by the Builder.  
Syntax for input to the Builder  
The syntax in the sequential data sets input to the Builder is similar (but not  
identical) to that allowed by CICSPlex SM. (For more information, see CICS  
Transaction Server for OS/390 Installation Guide.) The differences are given in the  
following list:  
|
|
1. The only statements you can supply are:  
v CREATE statements for TRANGRPs and DTRINGRPs.  
v REMOVE statements for TRANGRPs.  
v TEXT statements and line comments. (A line comment is a line that starts  
with an asterisk (*) in column 1.)  
v HEADER statements for the Builder, and not for a CICSPlex SM statement.  
2. Block comments delimited by ’/*’ and ’*/’ are not recognized.  
3. Transaction group names of up to 11 characters are allowed. (CICSPlex SM  
allows only 8 characters.)  
4. A CREATE TRANGRP statement must have exactly one NAME, one  
AFFINITY, and one AFFLIFE value. MATCH and STATE values are optional  
and ignored (they are overridden by the values on the PARM statement or the  
default). A DESC value is optional and ignored. Any other keywords are  
reported as errors.  
5. A CREATE DTRINGRP statement must have exactly one TRANGRP and one  
TRANID value. Any other keywords are reported as errors.  
6. REMOVE TRANGRP statements are optional and are ignored by the Builder.  
However, if a REMOVE TRANGRP statement appears in an input data set, it  
must have exactly one NAME value. Any other keywords are reported as  
errors.  
7. CONTEXT statements in the input data set are optional and are ignored by the  
Builder. They are overridden by the CONTEXT operand of the PARM  
statement (if specified) or the default.  
8. A HEADER statement requires no keyword. APPLID, SAVEDATE, and  
SAVETIME are all optional, and if specified their values are not validated. The  
HEADER statement must end in a semi-colon and should not span lines. Each  
input data set must start with a HEADER statement. (See “HEADER  
statements” on page 58.)  
56 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
9. If a line comment contains the characters HEADER anywhere in it, it is not  
treated as a comment and is parsed like any ordinary line in case it is a  
HEADER statement. Otherwise comment lines are thrown away.  
|
|
10. The only valid values for AFFINITY are GLOBAL, LUNAME, USERID, and  
BAPPL. NONE is not allowed.  
11. Keywords and values (including surrounding brackets) must not be split across  
input lines.  
12. Nested brackets are not allowed within values.  
13. The Builder is case sensitive. This applies to both keywords and their values  
(keywords must be in upper case).  
Any syntax error causes an error message to be issued. Logic errors are also  
possible; for example, CREATE DTRINGRP before CREATE TRANGRP can cause  
error messages to be issued.  
Any such errors do not cause the Builder to terminate immediately, but normally  
cause a skip to either the next keyword or the next statement, depending on the  
error. The Builder terminates with return code of 8 when EOF is finally reached. An  
error report lists all errors encountered. For each error, the line containing the error  
is output, plus up to four preceding lines for the same statement to put the error in  
context, plus the error message.  
input_statement = {create_statement |  
remove_statement |  
header_statement |  
context_statement |  
comment}  
create_statement = CREATE  
{create_trangrp |  
create_dtringrp}  
;
create_trangrp = TRANGRP  
NAME  
(trangroup)  
AFFINITY ({GLOBAL|LUNAME|USERID})  
AFFLIFE ({PERMANENT|SYSTEM|LOGON|SIGNON|PCONV})  
[DESC  
[MATCH  
[STATE  
(string)]  
({LUNAME|USERID})]  
({ACTIVE|DORMANT})]  
create_dtringrp = DTRINGRP  
TRANGRP (trangroup)  
TRANID (tranid)  
remove_statement = REMOVE  
TRANGRP  
NAME  
(trangroup)  
;
context_statement = CONTEXT  
[plexname]  
;
header_statement = HEADER  
[APPLID (applid)]  
[SAVEDATE (date)]  
[SAVETIME (time)]  
;
comment  
= '*'  
[string |  
header_statement]  
Figure 10. Builder input syntax  
Chapter 7. Running the Builder 57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HEADER statements  
The HEADER statement is specific to the Builder, and is not a CICSPlex SM  
statement. It is produced by the Reporter, and is needed by the Builder to create  
unique transaction group names.  
The Reporter generates temporary transaction group names (for example,  
CW.00000001 and TS.00000001) while it is running, and stores these names in the  
output data set for that run. However, the Builder can take several Reporter data  
sets as input, and may therefore get the same transaction group name from  
different input data sets (describing different affinity transaction groups).  
To ensure that the transaction group names are unique, the input transaction group  
names are qualified by the input data set name. To do this, when the Builder reads  
a HEADER statement (the first line of an input data set), it obtains the data set  
name from MVS. The HEADER statement is vital because without it the Builder  
cannot detect the change from one input data set to another.  
If you omit a HEADER statement, the Builder may generate error messages or add  
transactions to the wrong group, and give incorrect line numbers in the error report  
and an incomplete report of data sets processed.  
Output from the Builder  
The Builder outputs a file containing a set of definitions for combined affinity  
transaction groups, and a report listing the combinations that occurred.  
Combined affinity transaction group definitions  
Before each definition of a combined group in the output file, the Builder adds a  
commented-out REMOVE command for that group. If you already have combined  
groups of the same name, check that it is appropriate to delete them before  
uncommenting the REMOVE command.  
The name of each combined affinity transaction group is derived from the  
alphanumerically first transaction identifier in the combined group. For example, if  
ABCD was first, the transaction group name would be ABCDGRP.  
Note: For CICSPlex SM, the name of each combined affinity transaction group  
must be unique.  
For example, Figure 11 on page 59 shows the set of combined definitions that  
correspond to the basic definitions in Figure 9 on page 47, assuming that a MATCH  
filter of LUNAME, a STATE of ACTIVE, and a CONTEXT of CICPLEX1 was  
specified on the PARM statement.  
58 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
* HEADER APPLID(BUILDER ) SAVEDATE(95/11/27) SAVETIME(12:00:51);  
*
„1ꢀ  
* Generated by the CICS Transaction Affinities Utility (Builder) on 1995/06/28  
* Note: Suitable for input to CICSPlex SM  
*
CONTEXT CICPLEX1;  
*
* REMOVE TRANGRP NAME(AFF1GRP );  
CREATE TRANGRP NAME(AFF1GRP ) AFFINITY(LUNAME) AFFLIFE(SYSTEM  
MATCH(LUNAME) STATE(DORMANT);  
)
CREATE DTRINGRP TRANGRP(AFF1GRP ) TRANID(AFF1);  
CREATE DTRINGRP TRANGRP(AFF1GRP ) TRANID(AFF2);  
CREATE DTRINGRP TRANGRP(AFF1GRP ) TRANID(AFF3);  
CREATE DTRINGRP TRANGRP(AFF1GRP ) TRANID(AFF4);  
CREATE DTRINGRP TRANGRP(AFF1GRP ) TRANID(AFF5);  
CREATE DTRINGRP TRANGRP(AFF1GRP ) TRANID(AFF6);  
CREATE DTRINGRP TRANGRP(AFF1GRP ) TRANID(AFF7);  
CREATE DTRINGRP TRANGRP(AFF1GRP ) TRANID(AFF8);  
*
* REMOVE TRANGRP NAME(AFTDGRP );  
CREATE TRANGRP NAME(AFTDGRP ) AFFINITY(LUNAME) AFFLIFE(PCONV  
MATCH(LUNAME) STATE(DORMANT);  
CREATE DTRINGRP TRANGRP(AFTDGRP ) TRANID(AFTD);  
CREATE DTRINGRP TRANGRP(AFTDGRP ) TRANID(AFTR);  
CREATE DTRINGRP TRANGRP(AFTDGRP ) TRANID(AFTW);  
*
* REMOVE TRANGRP NAME(AUXXGRP );  
CREATE TRANGRP NAME(AUXXGRP ) AFFINITY(GLOBAL) AFFLIFE(SYSTEM  
MATCH(LUNAME) STATE(DORMANT);  
)
)
CREATE DTRINGRP TRANGRP(AUXXGRP ) TRANID(AUXX);  
CREATE DTRINGRP TRANGRP(AUXXGRP ) TRANID(CWA1);  
Figure 11. Sample definitions for combined affinity transaction groups  
Notes:  
1. The values of the SAVEDATE and SAVETIME fields in the HEADER statement  
give the latest save date and save time from any of the input data sets. (See  
Figure 11 („1ꢀ) and Figure 12 on page 61.)  
2. The combined transaction groups can be input again to the Builder. For  
example, you may decide to:  
a. Use the Reporter, then the Builder, to produce combined groups for  
temporary storage affinities.  
b. Use the Reporter, then the Builder, to produce combined groups for all other  
affinity command types.  
c. Merge the two files output by the Builder in steps 2.a and 2.b, by inputting  
those files to the Builder together.  
d. Input to CICSPlex SM the file output by the Builder in step 2.c.  
This facility is particularly useful when dealing with the temporary storage  
compression problem, described in “Compressing affinity data” on page 49.  
Combining basic affinity transaction groups  
When the Builder combines two basic affinity transaction groups, it assigns relations  
and lifetimes to the combined group based on the relations and lifetimes derived  
from the basic groups. This may cause some worsening of the relations and  
lifetimes. For example, LUNAME combined with USERID gives GLOBAL. Table 7  
Chapter 7. Running the Builder 59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
through “Affinity relations” on page 4 show the relations and lifetimes that result  
from combining basic affinity transaction groups.  
To help you analyze the effect of combining basic transaction affinity groups, the  
Builder produces a report that lists the combinations that occurred.  
Table 7. Resultant affinity relations  
Relation A  
GLOBAL  
BAPPL  
Relation B  
Any relation  
BAPPL  
Resultant relation C  
GLOBAL  
|
|
|
BAPPL  
BAPPL  
LUNAME  
USERID  
LUNAME  
USERID  
USERID  
GLOBAL  
BAPPL  
GLOBAL  
LUNAME  
LUNAME  
USERID  
LUNAME  
GLOBAL  
USERID  
Table 8. Resultant affinity lifetimes (LUNAME relation)  
Lifetime X  
PERMANENT  
SYSTEM  
SYSTEM  
SYSTEM  
LOGON  
Lifetime Y  
Any lifetime  
SYSTEM  
LOGON  
Resultant lifetime Z  
PERMANENT  
SYSTEM  
SYSTEM  
PCONV  
SYSTEM  
LOGON  
LOGON  
LOGON  
PCONV  
LOGON  
PCONV  
PCONV  
PCONV  
|
|
|
|
|
|
|
|
Table 9. Resultant affinity lifetimes (BAPPL relation)  
Lifetime X  
PERMANENT  
SYSTEM  
Lifetime Y  
Resultant lifetime Z  
PERMANENT  
SYSTEM  
Any lifetime  
Any other combination  
PROCESS  
PROCESS  
PROCESS  
ACTIVITY  
ACTIVITY  
PROCESS  
SYSTEM  
ACTIVITY  
PROCESS  
SYSTEM  
ACTIVITY  
ACTIVITY  
|
Table 10. Resultant affinity lifetimes (USERID relation)  
Lifetime X  
PERMANENT  
SYSTEM  
SYSTEM  
SYSTEM  
SIGNON  
Lifetime Y  
Any lifetime  
SYSTEM  
SIGNON  
PCONV  
Resultant lifetime Z  
PERMANENT  
SYSTEM  
SYSTEM  
SYSTEM  
SIGNON  
PCONV  
SIGNON  
SIGNON  
SIGNON  
PCONV  
PCONV  
PCONV  
60 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Table 11. Resultant affinity lifetimes (GLOBAL relation)  
Lifetime X  
Lifetime Y  
Resultant lifetime Z  
PERMANENT  
SYSTEM  
PERMANENT  
Any lifetime  
Any other lifetime combination  
Data sets processed report  
This report gives the names of all the input data sets (specified on the REPGRPS  
DD statement) that were read. This is produced even if errors occur in the input  
data sets.  
Note: Only data sets that contain a HEADER statement appear in the report.  
CICS TRANSACTION AFFINITIES UTILITY  
BUILDER REPGRPS DATASETS PROCESSED REPORT  
Dataset Name  
1995/11/28  
Page  
1
CICS  
APPLID  
Detector Last  
Save Date  
Detector Last  
Save Time  
-------------------------------------------- -------- -------------- --------------  
CICSPDN1.TRANGRPS.MERGE1  
CICSPDN1.TRANGRPS.MERGE2  
CICSPDN1.TRANGRPS.ONE  
CICSPDN1  
CICSPDN1  
CICSPDN1  
95/11/25  
95/11/26  
95/11/27  
09:05:09  
15:22:34  
12:00:51  
Figure 12. Sample data sets processed report  
Empty transaction groups report  
This report gives all basic transaction groups (trangroups) that were defined, but  
contained no transactions. It is produced only if the input data sets have no errors.  
An empty trangroup probably indicates that you have made a mistake. (The  
Reporter cannot produce empty trangroups, so you must have created the input by  
hand, and probably omitted some corresponding CREATE DTRINGRP statements.)  
CICS TRANSACTION AFFINITIES UTILITY  
BUILDER EMPTY TRANGROUP DEFINITIONS  
CICSPDN1.TRANGRPS.EMPTY1  
1995/11/28  
Page  
2
G1  
CICSPDN1.TRANGRPS.EMPTY2  
L2 (LUNAME PERMANENT)  
(GLOBAL SYSTEM  
)
G2  
L3  
(GLOBAL PERMANENT)  
(LUNAME LOGON  
G3  
L4  
(GLOBAL SYSTEM  
(LUNAME PCONV  
)
)
)
Figure 13. Example empty trangroups report  
Group merge report  
For each combined group, this report gives the constituent transactions and basic  
groups that went to comprise it. (This is a kind of audit trail.) It is produced only if  
there are no errors in the input data sets. It is very useful when establishing which  
basic group has caused the severe worsening of an affinity lifetime. For example, in  
Figure 14 on page 62, four groups were merged: three were LUNAME and PCONV,  
and one was LUNAME and SYSTEM. The latter caused the lifetime worsening.  
Chapter 7. Running the Builder 61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CICS TRANSACTION AFFINITIES UTILITY  
BUILDER GROUP MERGE REPORT  
1995/11/28  
Page  
3
Trangroup  
Affinity  
Lifetime  
Match  
: AFF1GRP  
: LUNAME  
: SYSTEM  
: LUNAME  
: DORMANT  
State  
Consists of Transactions  
AFF1 AFF2 AFF3 AFF4 AFF5 AFF6 AFF7 AFF8  
Consists of groups merged from  
CICSPDN1.TRANGRPS.MERGE1  
TS.00000001 (LUNAME PCONV  
CICSPDN1.TRANGRPS.MERGE2  
TS.00000001 (LUNAME SYSTEM  
)
TS.00000002 (LUNAME PCONV  
)
)
)
TS.00000002 (LUNAME PCONV  
Trangroup  
: AFTDGRP  
: LUNAME  
: PCONV  
: LUNAME  
: DORMANT  
Affinity  
Lifetime  
Match  
State  
Consists of Transactions  
AFTD AFTR AFTW  
Consists of groups merged from  
CICSPDN1.TRANGRPS.ONE  
TS.00000001 (LUNAME PCONV  
)
TS.00000002 (LUNAME PCONV  
)
Trangroup  
: AUXXGRP  
: GLOBAL  
: SYSTEM  
: LUNAME  
: DORMANT  
Affinity  
Lifetime  
Match  
State  
Consists of Transactions  
AUXX CWA1  
Consists of groups merged from  
CICSPDN1.TRANGRPS.ONE  
CW.00000001 (GLOBAL SYSTEM  
)
Figure 14. Sample group merge report  
Error report  
This report gives the syntax or logic of any errors that were detected in the  
processing of the input files. Each error is accompanied by a message. For a  
description of the message, see the CICS Messages and Codes manual.  
62 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CICS TRANSACTION AFFINITIES UTILITY  
BUILDER REPGRPS ERROR REPORT  
1996/02/08  
Page  
1
Dataset = CICSPDN1.TRANGRPS.ERR1  
Line Number Statement in error  
----------- ------------------------------------------------------------------------------  
5
6
7
CREATE TRANGRP NAME(G3  
DFHAU5038 INVALID AFFLIFE for AFFINITY.  
CREATE TRANGRP NAME(G4  
DFHAU5038 INVALID AFFLIFE for AFFINITY.  
CREATE TRANGRP NAME(G5  
DFHAU5038 INVALID AFFLIFE for AFFINITY.  
) AFFINITY(GLOBAL) AFFLIFE(LOGON  
);  
);  
);  
) AFFINITY(GLOBAL) AFFLIFE(SIGNON  
) AFFINITY(GLOBAL) AFFLIFE(PCONV  
Dataset = CICSPDN1.TRANGRPS.ERR2  
Line Number Statement in error  
----------- ------------------------------------------------------------------------------  
11 CREATE TRANGRP NAME(L4 ) AFFINITY(LUNAME) AFFLIFE(SIGNON );  
DFHAU5038 INVALID AFFLIFE for AFFINITY.  
15 CREATE TRANGRP NAME(U3  
)
16  
AFFINITY(USERID) AFFLIFE(LOGON  
);  
DFHAU5038 INVALID AFFLIFE for AFFINITY.  
Figure 15. Sample error report  
Chapter 7. Running the Builder 63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
64 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix A. Details of what is detected  
This appendix describes what is detected by the Detector and Reporter for each  
affinity type. Additionally, it highlights the differences, if any, with what the Scanner  
detects. (In general, the Scanner always detects more, because it covers paths that  
may not get exercised by the Detector, and because it cannot see beyond the  
command argument zero to eliminate commands that do not actually cause affinity.)  
This information adds details to the general description in “What is detected” on  
page 13.  
This chapter contains the following information:  
v “ENQ/DEQ”  
v “TS commands” on page 66  
v “LOAD HOLD/RELEASE” on page 66  
v “RETRIEVE WAIT/START” on page 66  
v “ADDRESS CWA” on page 67  
v “GETMAIN SHARED/FREEMAIN” on page 67  
v “LOAD/FREEMAIN” on page 67  
v “CANCEL/DELAY/POST/START” on page 68  
v “SPI commands” on page 69  
v “WAIT commands” on page 69  
ENQ/DEQ  
v The affinity here is between all transactions that ENQ or DEQ on a given  
resource. The match is made on the resource.  
v It is possible for the ENQ/DEQ resource to be either a character string of length  
1 to 255 bytes, or an address (which has an implied length of 4 bytes).  
|
v The affinity relation can be GLOBAL, BAPPL, or USERID.  
v Lifetime is always SYSTEM.  
v Commands that result in a LENGERR condition are grouped together and treated  
as a resource of ’LENGERR’. Any other condition results in a valid resource and  
does not affect the treatment of the command.  
v Because of affinity record size limitations, character string resources of greater  
than 207 bytes in length are compressed to 207 bytes. The compression is  
achieved by removing bytes from the middle of the string (these are probably  
less significant than those at either end). This means that such resources may be  
flagged as being the same when they are not, if the only variation is in the  
removed bytes. Check all such compressed resources to see if that is the case.  
The Reporter flags such compression, and pads the resource back out to the  
correct length for the report, by inserting ’?’ characters.  
© Copyright IBM Corp. 1994, 1999  
Download from Www.Somanuals.com. All Manuals Search And Download.  
65  
 
TS commands  
v The affinity here is between all transactions that use the same TS queue. It  
applies to both MAIN and AUXILIARY TS. The match is made on the name of  
the TS queue.  
|
|
v The affinity relation can be GLOBAL, BAPPL, LUNAME, or USERID.  
v Lifetime can be PCONV, LOGON, SIGNON, ACTIVITY, PROCESS,SYSTEM, and  
PERMANENT. A MAIN queue cannot be recovered, regardless of definition, so  
cannot cause PERMANENT.  
v No data is collected if a TS queue is defined as remote or if a remote SYSID is  
specified on the TS command. In such cases, the request is satisfied by a  
remote CICS region or by a temporary storage pool in the coupling facility.  
v Commands in error are treated in the same way as commands that give a  
NORMAL response, so data is collected.  
v If a TS queue is created and deleted within the same task, no data is collected.  
Scanner differences: Scanner detects all instances of TS commands.  
LOAD HOLD/RELEASE  
v The affinity here is between all transactions that LOAD HOLD and RELEASE the  
same program (or, more probably, table). The match is made on the program  
name.  
v The LOAD and RELEASE protocol applies only to programs that are defined with  
RELOAD(NO). If the Detector can not establish the RELOAD attribute for some  
reason, RELOAD(NO) is assumed.  
v Once a LOAD HOLD has occurred for a program, any subsequent LOAD (with or  
without HOLD) or RELEASE is part of the affinity.  
|
v The affinity relation is GLOBAL or BAPPL.  
v Lifetime is always SYSTEM.  
v Commands in error are treated in the same way as commands that give a  
NORMAL response, so data is collected.  
v LOAD with no HOLD for programs defined as RESIDENT is not treated as an  
affinity because relying on residency for sharing is inherently unsafe, the program  
can be replaced by SET PROG() NEWCOPY.  
v The incorrect use of RELEASE for a program defined with RELOAD(YES) is not  
detected.  
Scanner differences: Scanner detects all instances of LOAD, not just LOAD HOLD,  
and all instances of RELEASE.  
RETRIEVE WAIT/START  
v The affinity here is between all the transactions that issue START commands for  
a particular transaction at a terminal, where that transaction issues RETRIEVE  
WAIT. The transaction that issues the RETRIEVE WAIT is also part of the affinity.  
The match is made on the transid.  
v The affinity relation can be GLOBAL or USERID.  
v Lifetime can be SYSTEM or PERMANENT. PERMANENT is assumed if  
PROTECT is specified on any START.  
66 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
v If the transaction to be STARTed is defined as remote or a remote SYSID was  
specified on the START command so that the command is function shipped to a  
remote CICS region, no data is collected.  
v Commands in error are treated in the same way as commands that give a  
NORMAL response, so data is collected.  
Scanner differences: Scanner detects all instances of RETRIEVE WAIT, and all  
instances of START that either specify TERMID, or omit NOCHECK, or specify  
REQID (because of CANCEL affinity).  
ADDRESS CWA  
v The affinity here is between all transactions that issue ADDRESS CWA.  
v The affinity relation is GLOBAL or BAPPL.  
|
v Lifetime is always SYSTEM.  
Scanner differences: None.  
GETMAIN SHARED/FREEMAIN  
v The affinity here is between the transaction that obtains storage via GETMAIN  
SHARED and the transaction that frees the same piece of storage via  
FREEMAIN. Both transactions must be seen for there to be affinity. The match is  
made on storage address.  
v However, the situation is complicated by the fact that the storage address may  
be passed to other transactions; and if they access the storage, they cannot be  
detected, because the storage access does not take place through the CICS  
API.  
|
|
v The affinity relation may be GLOBAL, BAPPL,LUNAME, or USERID.  
v Lifetime can be PCONV, LOGON, SIGNON, ACTIVITY, PROCESS, or SYSTEM.  
However, the Detector always worsens LOGON and SIGNON to SYSTEM,  
because of limitations in the way that this affinity is detected.  
v Commands in error are ignored, as there is no address for matching GETMAIN  
with FREEMAIN, no data is collected.  
v A GETMAIN/FREEMAIN affinity is considered to be initiated from a terminal if the  
GETMAIN is initiated from a terminal. Whether the FREEMAIN was so initiated or  
not is irrelevant.  
v Any unmatched GETMAIN SHAREDs are also reported if they have never  
matched by the time a Detector stop occurs. They are output in a separate report  
section. Note that on a start with restore data, they are not restored and are  
deleted from the affinity file.  
Scanner differences: Scanner finds all instances of GETMAIN SHARED and all  
instances of FREEMAIN.  
LOAD/FREEMAIN  
v The affinity here is between the transaction that loads the program via LOAD and  
the transaction that releases the same program via FREEMAIN. The match is  
made on load point address.  
v However, the situation is complicated by the fact that the load point address may  
be passed to other transactions (for example, the program is actually a table);  
and if they access the program, they cannot be detected. This is analogous to  
storage address passing with GETMAIN SHARED/FREEMAIN.  
Appendix A. Details of what is detected 67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
v The LOAD and FREEMAIN protocol applies only to programs defined as  
RELOAD(YES). Note that HOLD is irrelevant, as CICS Program Control never  
sees the FREEMAIN, or knows the storage location of the individual task’s copy,  
and so cannot release the program at task end. This implies that all LOADs must  
be examined as they are all effectively LOAD HOLDs.  
|
|
v The affinity relation may be GLOBAL, BAPPL, LUNAME, or USERID.  
v Lifetime can be PCONV, LOGON, SIGNON, ACTIVITY, PROCESS,or SYSTEM.  
However, the Detector always worsens LOGON and SIGNON to SYSTEM,  
because of limitations in the way that this affinity is detected.  
v Commands in error are ignored, because there is no load address on which to  
match LOAD with FREEMAIN, so no data is collected.  
LOADs with no SET option are ignored, because no load address is returned, so  
no data is collected.  
v A LOAD/FREEMAIN affinity is considered to be initiated from a terminal if the  
LOAD is initiated from a terminal. Whether the FREEMAIN was so initiated or not  
is irrelevant.  
v Any unmatched LOADs are also reported if they have never matched by the time  
a Detector stop occurs. They are output in a separate report section. Note that  
on a start with restore data, they are not restored and are deleted from the  
affinity file.  
Scanner differences: Scanner finds all instances of LOAD and all instances of  
FREEMAIN.  
CANCEL/DELAY/POST/START  
v The affinity here is between the transaction that issues the DELAY, POST or  
START command and the transaction that issues the CANCEL command via  
REQID. The match is on REQID.  
v In order for another task to CANCEL a DELAY, REQID must be explicitly  
specified on the DELAY command. If no REQID is specified on a DELAY  
command, it cannot be canceled, and therefore cannot be detected.  
In order for another task to CANCEL a START or POST, it is not necessary to  
specify REQID on the command because CICS supplies a unique REQID that  
may be used (unless START specifies NOCHECK). So only START commands  
that do not both specify NOCHECK and omit REQID, and all POST commands,  
are detected.  
v Further, data is not collected for commands that expire on entry to Interval  
Control, because they cannot be canceled (because an element control interval  
(ICE) is not created). DELAY and POST commands get an EXPIRED response.  
For START commands there is no such response; so ’expired on entry’ is  
deduced if INTERVAL(0) was specified. This detects most ’expired on entry’  
STARTs, but not all.  
v START, DELAY, and POST commands in error are ignored, so no data is  
collected.  
v CANCEL commands that omit REQID are ignored because they cannot cancel  
another task. CANCEL commands that return a NOTFND response are also  
ignored because the ICE must have expired and the CANCEL must have failed.  
No data is collected for these.  
v REQIDs are assumed to be unique; that is, there are no simultaneous pairs of  
START/CANCEL using the same REQID. Having such a pair violates CICS  
programming guidelines, and the results from CICS are unpredictable.  
|
v The affinity relation for START may be GLOBAL, BAPPL, LUNAME, or USERID.  
68 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
|
v Lifetime can be PCONV, LOGON, SIGNON, ACTIVITY, PROCESS, SYSTEM, or  
PERMANENT. The PROTECT option determines whether SYSTEM or  
PERMANENT would be used. However, the Detector always worsens LOGON  
and SIGNON to SYSTEM or PERMANENT, because of limitations in the way that  
this affinity is detected.  
|
|
The affinity relation for DELAY and POST may be GLOBAL, BAPPL, LUNAME,  
or USERID.  
v Lifetime can be only SYSTEM, PROCESS, ACTIVITY, or PCONV. If the affinity  
relation is LUNAME or USERID, the lifetime must be PCONV because neither  
DELAY nor POST exist beyond task termination.  
v If the transaction specified on a START or CANCEL command is defined as  
remote, or a remote SYSID was specified on the command so that the command  
is function shipped to a remote CICS region, no data is collected. (It is not  
possible to function ship POST or DELAY commands.)  
v A CANCEL affinity is considered to be initiated from a terminal if the START,  
DELAY or POST is initiated from a terminal. Whether the CANCEL was so  
initiated or not is irrelevant.  
Scanner differences: Scanner detects all instances of POST, all instances of DELAY  
REQID, all instances of CANCEL REQID, and all instances of START that either  
omit NOCHECK or specify REQID or specify TERMID (because of RETRIEVE  
WAIT affinity).  
SPI commands  
v The commands included here are INQUIRE, SET, CREATE, DISCARD, ENABLE,  
DISABLE, EXTRACT EXIT, COLLECT STATISTICS, PERFORM, and RESYNC.  
|
v CBTS BROWSE COMMANDS are treated as inquire COMMANDS.  
v The affinity here is not an affinity between transactions, but rather an affinity with  
the system on which the command was issued; that is, a transaction-system  
affinity. Such affinities do not generate transaction affinity groups, because it does  
not generally make sense to dynamically route such transactions.  
v The use of these commands does require reporting, however, because the  
system programmer should be aware of the transactions and programs that issue  
such commands.  
Scanner differences: None.  
WAIT commands  
v The affinity here is really an inter-transaction affinity between the issuer of the  
WAIT EVENT, WAIT EXTERNAL, or WAITCICS command, and one or more  
posters. However, the poster of the ECB(s) associated with the WAIT command  
cannot be detected, because this is not performed via the CICS API. Only half  
the affinity can be detected.  
v This means affinity transaction groups cannot be created, because the affinity  
degenerates to an affinity with the system on which the WAIT command was  
issued; that is, a transaction-system affinity.  
v The use of WAIT commands does require reporting, however, because the  
system programmer should be aware of the transactions and programs that issue  
such commands, and should attempt to locate the posters and so create the  
correct inter-transaction affinity groups.  
Scanner differences: None.  
Appendix A. Details of what is detected 69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
70 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B. Correlating Scanner and Reporter output to  
source  
This appendix describes how to match the EXEC CICS command in the Reporter  
report and/or the Scanner detail report with the actual program source code. It also  
gives some examples of the procedures described.  
Reporter output  
The reported offset of a command is the offset from the start of the load module of  
the BALR to the CICS stub. To get the offset from the start of the program, subtract  
the length of the CICS stub from the offset reported. (You may also need to subtract  
the lengths of any additional preceding CSECTs.) You can then use the compiler  
listing to find the command.  
Scanner output  
The reported offset of a command is the offset from the start of the load module of  
the CICS command argument zero.6 This is a constant and is therefore located in  
the literal pool for the program. As with the Reporter, subtract the length of the  
CICS stub and preceding CSECTS to get the offset from the start of the program.  
You should then be able to locate the argument zero in the compiler listing. Next,  
match the argument zero to the command, which involves finding the instruction  
that referenced the argument zero, using the compiler listing.  
Examples  
This section gives some examples of the procedures for the Scanner.  
Example 1–Assembler-language  
Before the BALR to the CICS stub, the CICS translator generates an LA instruction  
with the argument zero as source. For example:  
LA  
14,=X'02028000080700000000000000000000000000000000'  
To locate the EXEC CICS command, you can match the argument zero in the literal  
pool with the same argument zero in the LA instruction.  
6. For an explanation of argument zero, see “Notes on terminology” on page x.  
© Copyright IBM Corp. 1994, 1999  
Download from Www.Somanuals.com. All Manuals Search And Download.  
71  
 
Example 2–VS COBOL II  
The literal pool in VS COBOL II is part of the CGT. Having calculated the offset  
from the start of the program, you should subtract the start of the CGT from your  
calculated offset to get the offset within the CGT. In the listing, there is an MVC  
instruction with the argument zero as the source, of the form:  
MVC  
D1(L,R1),D2(R2)  
DFHEIV0  
PGMLIT AT ...  
where:  
DFHEIV0  
is the slot in working storage into which the argument zero is copied before  
the BALR to the CICS stub  
D2  
R2  
is the decimal offset of the argument zero within the CGT (which you have  
just calculated)  
is the CGT base register  
Once you know the offset of the argument zero within the CGT, you can find the  
MVC and hence the EXEC CICS command.  
An example of finding an EXEC CICS command is given in Figure 16 on page 73.  
72 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
For the Scanner output:  
CICS TRANSACTION AFFINITIES UTILITY  
1995/11/19 Page  
1
LOAD MODULE SCANNER - DETAILED LISTING OF CICS.PRODN1.LOCLLOAD  
Module Name - ACCT04  
/
Load Module Length - 000159D0  
/
Module Entry Point - 00000028  
EDF DEBUG Possible Command  
Offset Storage Content (HEX)  
Affinity  
-------- -------------------------------------------------- --------- ----------------------- --------  
000007A6 0A02E0000700004100  
Total possible Affinity commands =  
Total possible MVS POSTs  
00669  
WRITEQ TS  
Trans  
1
0
=
The COBOL source after translation was:  
001123  
001124  
001125  
001126  
001127  
001128  
*EXEC CICS WRITEQ TS QUEUE('ACERLOG') FROM(ACCTERRO)  
LENGTH(ERR-LNG) END-EXEC.  
MOVE ' ' 00669 ' TO DFHEIV0  
*
\
97800000 1057  
1034  
MOVE 'ACERLOG' TO DFHC0080  
CALL 'DFHEI1' USING DFHEIV0 DFHC0080 ACCTERRO ERR-LNG.  
EXT 1057 1034 380 861  
The equivalent Assembler-language is:  
001126 MOVE  
002764 D210 8558 A6C6  
00276A 9240 8569  
00276E D232 856A 8569  
MVC 1368(17,8),1734(10)  
MVI 1385(8),X'40'  
MVC 1386(51,8),1385(8)  
DFHEIV0  
DFHEIV0+17  
DFHEIV0+18  
PGMLIT AT +1718  
DFHEIV0+17  
001127 MOVE  
002774 D207 8340 ACEA  
001128 CALL  
MVC 832(8,8),3306(10)  
DFHC0080  
PGMLIT AT +3290  
00277A 4130 8558  
00277E 5030 D1B0  
002782 4130 8340  
002786 5030 D1B4  
00278A 4130 75A8  
00278E 5030 D1B8  
002792 4130 9A0E  
002796 5030 D1BC  
00279A 9680 D1BC  
00279E 4110 D1B0  
0027A2 4100 D150  
0027A6 0530  
LA 3,1368(0,8)  
ST 3,432(0,13)  
LA 3,832(0,8)  
ST 3,436(0,13)  
LA 3,1448(0,7)  
ST 3,440(0,13)  
LA 3,2574(0,9)  
ST 3,444(0,13)  
OI 444(13),X'80'  
LA 1,432(0,13)  
LA 0,336(0,13)  
BALR 3,0  
DFHEIV0  
TS2=0  
DFHC0080  
TS2=4  
ACCTERRO  
TS2=8  
ERR-LNG  
TS2=12  
TS2=12  
TS2=0  
CLLE@=2  
0027A8 5030 D158  
0027AC 58F0 A000  
0027B0 05EF  
0027B2 50F0 D078  
0027B6 BF38 D089  
0027BA 0430  
ST 3,344(0,13)  
TGT FDMP/TEST-INFO. AREA +0  
V(DFHEI1  
L
15,0(0,10)  
)
BALR 14,15  
ST 15,120(0,13)  
ICM 3,8,137(13)  
SPM 3,0  
TGTFIXD+120  
TGTFIXD+137  
Figure 16. Example for finding an EXEC CICS command from the argument zero  
For this, the calculations are:  
Scanner offset  
CICS stub length  
Offset of CGT  
= X'7A6'  
= X'28'  
= X'B8'  
CGT base register = GPR 10  
Offset within CGT = X'7A6' - X'28' - X'B8' = X'6C6' = 1734 (decimal)  
MVC instruction looks like:  
MVC  
d(l,r),1734(10)  
DFHEIV0  
PGMLIT AT ...  
To determine the EXEC CICS command:  
1. Look at the Assembler-language for  
MVC  
d(l,r),1734(10)  
DFHEIV0  
PGMLIT AT ...  
which occurs for the first MOVE  
Appendix B. Correlating Scanner and Reporter output to source 73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
001126 MOVE  
2. Look at the COBOL source for the MOVE at line 001126. This is for the EXEC  
CICS WRITEQ TS command starting on line 001124.  
74 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix C. Useful tips when analyzing Transaction Affinities  
Utility reports  
Sometimes the report produced by the Reporter from data gathered from the  
Detector can contain some results that appear odd at first glance. This appendix  
gives tips for resolving such results.  
COBOL affinities  
If an application program is invoked using the native CALL statement, CICS COBOL  
run-time code issues an EXEC CICS LOAD HOLD for the program and branches to  
it directly. This causes affinity only if the program is not reentrant; that is, if it  
modifies itself. Otherwise, there is no affinity.  
CICS COBOL run-time code writes data to a TS queue if an abnormal termination  
occurs. The TS queue name used is “CEBR” plus the termid of the terminal, or  
blanks if there is no terminal. This does not cause affinity.  
LOGON or SYSTEM when PCONV expected  
When dealing with an application that is known to use TS queues within a  
pseudoconversation, but never beyond, there may be occurrences in the report of  
affinity groups that appear as LUNAME/SYSTEM or LUNAME/LOGON, instead of  
the expected LUNAME/PCONV.  
v A SYSTEM lifetime can be explained if the installation uses a session manager  
that logs users off after a pre-determined quiet time. When the log off occurs in  
the middle of a pseudoconversation, the Transaction Affinities Utility notices that  
the TS queue still exists, and increases the lifetime to SYSTEM.  
v A LOGON lifetime can be explained by the user switching off the terminal in the  
middle of a pseudoconversation and causing a VTAM® line error. This causes an  
error transaction to be attached internally at the terminal. The affinity utility  
program notices that the TS queue exists at the end of that transaction, and  
increases the lifetime to LOGON.  
In both these circumstances the real lifetime is PCONV, because, although the TS  
queue exists at the end of the pseudoconversation, the data in it will never be used  
again. Normally the first action of a new pseudoconversation is to delete the  
contents of all such TS queues for that terminal to ensure that everything is tidy.  
Unrecognized Transids  
Transids that consist of garbage data are reported in the Transaction Affinities Utility  
report. Such transids are not known to CICS, and most contain the same  
hexadecimal data. This is probably caused by a bug in an application that causes  
the EIB to be overwritten.  
© Copyright IBM Corp. 1994, 1999  
Download from Www.Somanuals.com. All Manuals Search And Download.  
75  
 
76 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix D. Diagnostics  
This appendix contains these sections:  
v “Detector table manager diagnostics”  
v “Detector CAFB request queue manager diagnostics” on page 80  
v “Date formatter diagnostics” on page 80  
Detector table manager diagnostics  
This section lists the meaning for each possible value of the call parameters that  
are included in the error messages issued if an error occurs on a call to the  
Detector and Builder table manager, CAUTABM.  
Function code values  
AUTM_CREATE_POOL  
AUTM_DESTROY_POOL  
1
2
AUTM_CREATE_TABLE  
AUTM_DESTROY_TABLE  
AUTM_ADD_ELEMENT  
3
4
5
AUTM_DELETE_ELEMENT  
AUTM_REPLACE_ELEMENT  
AUTM_GET_KEY_ELEMENT  
AUTM_GET_FIRST_ELEMENT  
AUTM_GET_NEXT_ELEMENT  
AUTM_GET_ELEMENT  
6
7
8
9
10  
11  
12  
AUTM_GET_KEY_GE_ELEMENT  
© Copyright IBM Corp. 1994, 1999  
Download from Www.Somanuals.com. All Manuals Search And Download.  
77  
 
Table identifier values  
AUTM_EDSR  
AUTM_EDST  
AUTM_EDR  
AUTM_EDT  
AUTM_TSQ  
AUTM_TST  
AUTM_LRP  
AUTM_LRT  
AUTM_SRS  
AUTM_SRT  
AUTM_CWA  
AUTM_CWT  
AUTM_GFA  
AUTM_GFM  
AUTM_LFA  
AUTM_LFM  
AUTM_ICR  
AUTM_ICM  
AUTM_SPI  
AUTM_WAIT  
AUTM_TT  
1
2
3
4
5
6
7
8
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
28  
29  
30  
31  
AUTM_UT  
AUTM_BLD_DNT  
AUTM_BLD_GNT  
AUTM_BLD_TT  
AUTM_BLD_MERGED  
78 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reason code values  
AUTM_INVALID_FUNCTION  
AUTM_NO_STORAGE  
AUTM_ELEMENT_NOT_FOUND  
AUTM_ELEMENT_EXISTS  
0
1
2
3
AUTM_INVALID_TABLE  
AUTM_IEFUSI_HIT  
4
5
AUTM_TABLE_EXISTS  
AUTM_TABLE_DOES_NOT_EXIST  
AUTM_POOL_EXISTS  
6
7
8
AUTM_POOL_DOES_NOT_EXIST  
AUTM_INVALID_CURSOR  
9
10  
AUTM_DEFAULT_SIFD_ERROR  
AUTM_DEFAULT_SIFA_ERROR  
AUTM_DEFAULT_DSP_ERROR  
AUTM_DEFAULT_AVL_ERROR  
AUTM_SIFD_CREATE_POOL_ERROR  
AUTM_SIFA_CREATE_POOL_ERROR  
AUTM_DSP_CREATE_POOL_ERROR  
AUTM_SIFD_DESTROY_POOL_ERROR  
AUTM_SIFA_DESTROY_POOL_ERROR  
AUTM_DSP_DESTROY_POOL_ERROR  
AUTM_AVL_CREATE_TABLE_ERROR  
AUTM_SIFA_CREATE_TABLE_ERROR  
AUTM_AVL_DESTROY_TABLE_ERROR  
AUTM_SIFA_DESTROY_TABLE_ERROR  
AUTM_AVL_ADD_ERROR  
192  
193  
194  
195  
196  
197  
198  
199  
200  
201  
202  
203  
204  
205  
206  
207  
208  
209  
210  
211  
212  
213  
214  
215  
216  
217  
218  
219  
220  
AUTM_SIFA_ADD_ERROR  
AUTM_AVL_GET_KEY_ERROR  
AUTM_AVL_GET_FIRST_ERROR  
AUTM_AVL_GET_NEXT_ERROR  
AUTM_AVL_DELETE_ERROR  
AUTM_SIFA_DELETE_ERROR  
AUTM_AVL_REPLACE_ERROR  
AUTM_DSP_RESERVE_ERROR  
AUTM_DSP_RELEASE_ERROR  
AUTM_DSPSERV_CREATE_ERROR  
AUTM_DSPSERV_DELETE_ERROR  
AUTM_ALESERV_ADD_ERROR  
AUTM_ALESERV_DELETE_ERROR  
AUTM_AVL_GET_ERROR  
Appendix D. Diagnostics 79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Detector CAFB request queue manager diagnostics  
This section  
Lists the meaning for each possible value of the call parameters that are  
included in the error messages issued if an error occurs on a call to the  
Detector CAFB request queue manager, CAUCAFP.  
Function code values  
AUCP_ADD_CELL_FIRST  
1
2
3
4
5
AUCP_ADD_CELL_LAST  
AUCP_CREATE_CPOOL  
AUCP_DESTROY_CPOOL  
AUCP_GET_CELL  
Reason code values  
AUCP_NO_STORAGE  
1
2
3
4
AUCP_CPOOL_FAILED  
AUCP_INVALID_FUNCTION  
AUCP_NOT_FOUND  
Date formatter diagnostics  
This section  
Lists the meaning for each possible value of the call parameters that are  
included in the error messages issued if an error occurs on a call to the  
Transaction Affinities Utility date formatter, CAUCAFDT.  
Reason code values  
CAUD_NO_DATE  
CAUD_FORMAT  
1
2
80 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Index  
A
CAFF02, Detector options screen  
example 36  
CICS BTS, detection of 14  
CICSPlex SM 1, 18, 55  
collecting data  
activity  
affinity  
5
avoiding  
6
combining basic affinity transaction groups 59  
control record VSAM file 17  
data VSAM files 17  
inter-transaction  
lifetimes  
overview  
how to 15  
combining basic affinity transaction groups 59  
control record VSAM file 17  
correlating output  
4
4
3
example, assembler language 71  
example, VS COBOL II 72  
examples of 71  
Reporter output 71  
Scanner output 71  
programming techniques  
safe  
5
6
suspect  
unsafe  
6
6
Cross System Product and affinities 50  
CSP and affinities 50  
relations  
transaction group definitions, producing 46  
transaction-system  
4
4
affinity data VSAM files 17  
D
affinity transaction group definitions, producing 46  
affinity transaction groups, combining 59  
analyzing affinity utility program reports  
COBOL affinities 75  
data space size 21  
date formatter diagnostics 80  
detailed report (Scanner)  
creating 27  
LOGON or SYSTEM when PCONV expected 75  
unrecognized transids 75  
output contents 28  
output example 29  
details of what is detected  
ADDRESS CWA commands 67  
CANCEL commands 68  
DELAY commands 68  
DEQ commands 65  
B
BAPPL affinity relation  
4
basic affinity transaction groups, combining 59  
Builder 55  
ENQ commands 65  
FREEMAIN commands 67  
GETMAIN SHARED/FREEMAIN commands 67  
LOAD commands 67  
POST commands 68  
RETRIEVE START commands 66  
RETRIEVE WAIT commands 66  
SPI commands 69  
changes to CAUJCLBL job 55  
combined affinity transaction group definitions 58  
combining basic affinity transaction groups 59  
data sets processed report 61  
empty transaction groups report 61  
error report 62  
group merge report 61  
HEADER statements 58  
input parameters 55  
output 58  
overview 18  
running 55  
syntax for input to 56  
START commands 68  
TS commands 66  
WAIT commands 69  
Detector  
affinity data VSAM files 17  
CAFB request queue manager diagnostics 80  
CAFB transaction 16  
changing options 36  
collecting data 15  
control record VSAM file 17  
controlling 15  
displaying the control screen 32  
how data is collected 15  
how data is saved 16  
options screen, CAFF02 36  
example 36  
C
CAFB request queue manager diagnostics 80  
CAFB transaction 16  
CAFF transaction 31  
CAFF01 screen, to control the Detector 31  
displaying 32  
example 32  
pausing data collection 34  
resuming data collection 34  
starting data collection 33  
stopping data collection 35  
overview 12  
pausing data collection 34  
performance 18  
resuming data collection 34  
© Copyright IBM Corp. 1994, 1999  
81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Detector (continued)  
protecting applications from one another  
7
saving data 17  
pseudoconversation affinity lifetime  
pseudoconversation end, 13  
5
starting data collection 33  
stopping data collection 35  
table manager diagnostics 77  
what is detected 13  
R
relation of affinities  
what is not detected 14  
worsening of affinities lifetimes 14  
worsening of affinities relations 14  
diagnostics  
BAPPL  
global  
4
4
LUname  
overview  
4
4
CAFB request queue manager 80  
data formatter 80  
userid  
4
worsening 14  
RELEASE commands 66  
Reporter 41  
table manager 77  
dynamic transaction routing  
benefits  
compared to static routing  
cost  
overview  
3
affinity transaction group definitions, producing 46  
affinity transaction groups, modifying 48  
compressing affinity data 49  
output 42  
1
3
1
output report 43  
output report (example) 43  
overview 18  
running 31, 41  
G
global affinity relation  
4
understanding the affinities 48  
using the report 47  
reports  
H
HEADER statements, Builder 58  
HOLD commands 66  
affinity report, Reporter 43  
analyzing, useful tips 75  
creating a detailed report, Scanner 27  
creating a summary report, Scanner 25  
data sets processed report, Builder 61  
detailed, contents of 28  
detailed report, Scanner 27  
empty transaction groups report, Builder 61  
error report, Builder 62  
I
installing the affinity utility program  
creating the VSAM files 21  
data space size 21  
overview 21  
restarting your CICS region 23  
tailoring your CICS startup job 23  
group merge report, Builder 61  
requesting region  
2
routing region  
2
L
S
lifetime of affinities  
activity  
logon  
5
safe programming techniques  
saving data 16  
6
5
overview  
permanent  
process  
pseudoconversation  
4
Scanner  
5
creating a detailed report 27  
input parameters 27  
output contents 28  
creating a summary report 25  
input parameters 25  
output contents 26  
overview 12  
5
5
signon  
system  
5
5
worsening 14  
log off, detection of 14  
logon affinity lifetime  
5
running 25  
LUname affinity relation  
4
sign off, detection of 14  
signon affinity lifetime  
5
static transaction routing  
compared to dynamic routing  
summary report (Scanner)  
creating 25  
P
1
permanent affinity lifetime  
5
process  
programming techniques for transaction affinity  
safe  
5
output contents 26  
output example 27  
6
suspect  
unsafe  
6
6
suspect programming techniques  
6
system affinity lifetime  
5
82 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
T
target region  
2
temporary storage compression 49  
Transaction Affinities Utility  
Builder overview 18  
commands detected 11  
control record VSAM file 17  
data VSAM files 17  
date formatter diagnostics 80  
Detector overview 12  
overview  
9
preparing to use 21  
Reporter overview 18  
Scanner overview 12  
what is detected 13  
what is not detected 14  
transaction affinity  
avoiding  
6
combining basic affinity transaction groups 59  
control record VSAM file 17  
data VSAM files 17  
inter-transaction  
4
lifetimes  
overview  
4
3
programming techniques  
safe  
5
6
suspect  
unsafe  
6
6
relations  
transaction group definitions, producing 46  
transaction-system  
transaction group definitions, producing 46  
4
4
transaction isolation  
transaction routing  
7
dynamic (overview)  
1
dynamic versus static  
1
U
unsafe programming techniques  
6
userid affinity relation  
4
V
VSAM  
creating the VSAM files 21  
defining VSAM files to CICS 22  
VSAM files 17  
Index 83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
84 CICS Transaction Affinities Utility Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sending your comments to IBM  
If you especially like or dislike anything about this book, please use one of the  
methods listed below to send your comments to IBM.  
Feel free to comment on what you regard as specific errors or omissions, and on  
the accuracy, organization, subject matter, or completeness of this book.  
Please limit your comments to the information in this book and the way in which the  
information is presented.  
To request additional publications, or to ask questions or make comments about the  
functions of IBM products or systems, you should talk to your IBM representative or  
to your IBM authorized remarketer.  
When you send comments to IBM, you grant IBM a nonexclusive right to use or  
distribute your comments in any way it believes appropriate, without incurring any  
obligation to you.  
You can send your comments to IBM in any of the following ways:  
v By mail, to this address:  
Information Development Department (MP095)  
IBM United Kingdom Laboratories  
Hursley Park  
WINCHESTER,  
Hampshire  
United Kingdom  
v By fax:  
– From outside the U.K., after your international access code use  
44–1962–870229  
– From within the U.K., use 01962–870229  
v Electronically, use the appropriate network ID:  
– IBM Mail Exchange: GBIBM2Q9 at IBMMAIL  
– IBMLink™: HURSLEY(IDRCF)  
– Internet: [email protected]  
Whichever you use, ensure that you include:  
v The publication number and title  
v The topic to which your comment applies  
v Your name and address/telephone number/fax number/network ID.  
© Copyright IBM Corp. 1994, 1999  
Download from Www.Somanuals.com. All Manuals Search And Download.  
85  
 
IBMR  
Program Number: 5655-147  
Printed in the United States of America  
on recycled paper containing 10%  
recovered post-consumer fiber.  
SC33-1777-02  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Spine information:  
IBM  
CICS TS for OS/390  
CICS Transaction Affinities Utility Guide  
Release 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Graham Field Baby Accessories 14423 2 User Manual
Haier Washer XQBM30 22 User Manual
Hamilton Beach Toaster 22655C User Manual
Hans Grohe Indoor Furnishings 35807801 User Manual
Honeywell Thermostat CT87 User Manual
Hotpoint Freezer FFA64 User Manual
Hotpoint Oven SE48101PGX User Manual
Huey Chiao Bluetooth Headset HCB29A User Manual
Iiyama Computer Monitor HF703UT User Manual
IKEA Indoor Furnishings AA 52710 3 User Manual