IBM Computer Monitor T 55A User Manual

Flat Panel Monitor  
15.0 inch(381mm) TFT LCD  
1024 x 768 Addressability  
16.7 Million Colors  
TCO 95  
User Guide  
Guide de l’utiliseur  
Benutzerhandbuch  
Manual del usuario  
Manuale per l’utente  
T55A  
Type 9513  
Download from Www.Somanuals.com. All Manuals Search And Download.  
These user’s setup instructions cover typical user environments. The on-screen  
messages may differ depending on the level of your hardware and software. In some  
cases you may need to vary the setup procedures.  
For more information, refer to your computer or operating system manuals or consult  
your system administrator or dealer.  
Ces instructions de configuration d’exploitation s’appliquent aux environnements  
d’utilisation types. Les messages affichés à l’écran peuvent varier en fonction du niveau  
de votre matériel et de vos logiciels informatiques. Dans certains cas, vous pouvez être  
amenés à changer de procédures de configuration.  
Pour de plus amples informations à ce sujet, veuillez vous reporter aux manuels de votre  
ordinateur et de votre système d’exploitation, ou consultez l’administrateur de votre  
système ou votre revendeur.  
Diese Einstellungsanweisungen durch den Benutzer gelten für typische  
Betriebsumgebungen. Die Bildschirmmeldungen können je nach Art der verwendeten  
Hardware und Software auch anders lauten. In einigen Fällen müssen die  
Einstellungsschritte unter Umständen abgeändert werden.  
Weitere Informationen finden Sie im Computer- oder Betriebssystemhandbuch, oder  
wenden Sie sich an Ihren Systemadministrator oder Fachhändler.  
En estas instrucciones de configuración se describen entornos de usuarios típicos. Los  
mensajes en pantalla, pueden diferir según sea el nivel del hardware y del software. En  
algunos casos, necesitará seguir otros procedimientos para la configuración.  
Para obtener más información, puede consultar los manuales del ordenador o del sistema  
operativo o ponerse en contacto con el administrador del sistema o con el distribuidor.  
Queste istruzioni di configurazione per l’utente coprono gli ambienti operativi comuni. I  
messaggi che appaiono sul video possono differire a seconda dell’hardware e del  
software utilizzati. In alcuni casi potrebbe essere necessario variare le procedure di  
configurazione.  
Per ulteriori informazioni, fare riferimento ai manuali del computer o del sistema  
operativo, o consultare il proprio amministratore di sistema o il concessionario.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DANGER  
To avoid shock hazard:  
Do not remove the covers.  
Do not operate this product unless the stand is attached.  
Do not connect or disconnect this product during an electrical storm.  
The power cord plug must be connected to a properly wired and grounded power outlet.  
Any equipment to which this product will be attached must also be connected to properly wired  
and grounded power outlets.  
To isolate the monitor from the electrical supply, you must remove the plug from the power  
outlet. The power outlet should be easily accessible.  
DANGER  
Pour éviter les risques d’électrocution :  
Ne retirez pas les capots du moniteur.  
N’utilisez pas ce produit si le socle n’est pas fixé.  
Ne connectez, ni ne déconnectez ce produit pendant un orage.  
Le câble d’alimentation doit être connecté à une prise électrique correctement mise à la terre  
et en bon état de marche.  
Tout équipement auquel ce produit est relié doit être également connecté à une prise  
correctement mise à la terre et en bon état de marche.  
Pour isoler le moniteur de la source d’alimentation électrique, vous devez le débrancher de la  
prise électrique. Cette prise doit être facile d’accès  
GEFAHRENHINWEIS  
Um die Gefahr eines elektrischen Schlags zu vermeiden, folgendes beachten:  
Unter keinen Umständen die Abdeckungen abnehmen.  
Das Produkt nicht in Betrieb nehmen, wenn der Sockel nicht montiert ist.  
Das Gerät nicht während eines Gewitters an eine Steckdose anschließen oder von ihr trennen.  
Das Netzkabel ist an eine ordnungsgemäß verdrahtete und geerdete Steckdose  
anzuschließen.  
Jedes Gerät, mit dem dieses Produkt verbunden wird, muß ebenfalls an eine ordnungsgemäß  
verdrahtete und geerdete Steckdose angeschlossen werden.  
Um den Monitor von der Stromversorgung zu trennen, muß der Stecker aus der Steckdose  
gezogen werden. Die Steckdose sollte leicht zugänglich sein.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GEVAAR  
Ga als volgt te werk om het gevaar van een elektrische schok te voorkomen:  
Verwijder in geen enkel geval de kap.  
Stel dit produkt alleen in werking als de voet is bevestigd.  
Sluit dit apparaat niet aan op, of verbreek de aansluiting van dit apparaat niet van een  
contactdoos tijdens onweer.  
Het netsnoer moet worden aangesloten op een geaarde contactdoos met correcte bedrading.  
Ook alle apparatuur waarop dit produkt wordt aangesloten moet zijn aangesloten op een  
contactdoos met correcte bedrading.  
Om het beeldscherm te ontkoppelen van de netvoeding, dient u de stekker uit de contactdoos  
te trekken. De contactdoos dient goed toegankelijk te zijn.  
PELIGRO  
Para evitar riesgos de descargas eléctricas:  
No retire bajo ningún concepto las cubiertas.  
No maneje el monitor sin antes acoplar el soporte.  
No conecte ni desconecte el equipo de una toma de alimentación durante una tormenta  
eléctrica.  
El cable de alimentación debe estar conectado a un enchufe debidamente cableado y con  
toma de tierra.  
Cualquier equipo al que se vaya a conectar este producto también debe estar conectado a  
tomas de alimentación cableadas y conectadas a tierra correctamente.  
Para aislar el monitor del suministro eléctrico, debe retirar el enchufe de la toma de  
alimentación. Esta toma deberá ser de fácil acceso.  
PERICOLO  
Per evitare il rischio di scariche elettriche:  
Non rimuovere nessuna parte del telaio.  
Non accendere il prodotto se il piedistallo non è stato montato.  
Non collegare o scollegare il prodotto nel corso di un temporale.  
La spina del cavo di alimentazione deve essere collegata ad una presa di corrente con messa  
a terra, installata in maniera appropriata.  
Le apparecchiature a cui il prodotto viene attaccato devono essere collegate a prese di  
corrente con messa a terra, installate in maniera appropriata.  
Per isolare il monitor dalla corrente elettrica, staccare la spina dalla presa di alimentazione, che  
deve essere facilmente accessibile.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PERIGO  
Para evitar o perigo de choques eléctricos:  
Não retire as coberturas.  
Não utilize este produto antes de montar a base.  
Não ligue nem desligue este produto durante uma tempestade eléctrica.  
O cabo de alimentação deve ser ligado a uma tomada eléctrica devidamente ligada à terra.  
Qualquer equipamento ligado a este produto deve estar ligado a tomadas eléctricas  
devidamente ligadas à terra.  
Para isolar o monitor da fonte de alimentação, retire a ficha do cabo de alimentação da tomada  
eléctrica. A tomada eléctrica deve ser de fácil acesso.  
FARE  
Sådan undgår du elektrisk stød:  
Kabinettet må under ingen omstændigheder fjernes.  
Undgå at anvende dette produkt, uden at vippe/drejefoden er monteret.  
Undgå at tilslutte eller frakoble dette produkt i tordenvejr.  
Netledningen skal være tilsluttet en korrekt jordet stikkontakt med korrekt ledningsføring.  
Alt udstyr, som tilsluttes dette produkt, skal også være tilsluttet korrekt jordede stikkontakter  
med korrekt ledningsføring.  
For at isolere skærmen fra strømforsyningen, skal stikket tages ud af stikkontakten.  
Stikkontakten bør være let tilgængelig.  
FARE  
Slik unngår du fare for elektrisk støt:  
Ikke ta av dekslene.  
Ikke bruk produktet dersom sokkelen ikke er  
montert.  
Ikke koble produktet til eller fra under tordenvær.  
Pluggen på strømledningen må kobles til korrekt montert og jordet strømuttak.  
Utstyr som dette produktet eventuelt blir koblet til, må også kobles til korrekt montert og jordet  
strømuttak.  
For å isolere skjermen fra strømkilden må du ta ut pluggen fra strømuttaket. Strømuttaket bør  
være lett tilgjengelig.  
VARNING - LIVSFARA  
För att undvika risk för elektriska stötar måste du tänka på följande:  
Ta inte bort några skyddskåpor.  
Använd inte den här produkten innan du har satt fast stativet.  
Anslut inte produkten till ett eluttag under åskväder. Koppla inte heller ur produkten från ett  
eluttag under åskväder.  
Strömkabeln måste anslutas till ett felfritt och jordat uttag.  
All utrustning som den här produkten kopplas till måste också anslutas till felfria och jordade  
uttag.  
För att bryta strömmen till bildskärmen måste du dra ut kontakten. Vägguttaget bör vara lätt att  
komma åt.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VAARA  
Sähköiskun vaaran välttämiseksi:  
• Älä avaa laitteen kansia missään tilanteessa.  
Älä käytä laitetta, ellei jalustaa ole kiinnitetty.  
• Älä kytke laitetta pistorasiaan tai irrota sitä pistorasiasta ukonilman aikana.  
• Virtajohto on kytkettävä asianmukaisesti johdotettuun ja maadoitettuun pistorasiaan.  
• Kaikki muutkin laitteet, joihin tämä tuote on liitetty, on kytkettävä asianmukaisesti  
johdotettuihin pistorasioihin.  
Kun haluat erottaa näyttimen sähköverkosta, sinun pitää irrottaa sen verkkojohto pistorasiasta.  
Pistorasian pitäisi olla mahdollisimman lähellä näytintä ja vaivattomasti käsillä.  
KINDYNOS  
Ãéá ôçí áðïöõãÞ êéíäýíïõ çëåêôñïðëçîßáò:  
Ìçí áöáéñåßôå ôá êáëýììáôá.  
Ìç èÝôåôå ôï ðñïúüí áõôü óå ëåéôïõñãßá ÷ùñßò íá åßíáé óôåñåùìÝíç ç âÜóç ôïõ.  
Ìç óõíäÝåôå Þ áðïóõíäÝåôå ôï ðñïúüí áõôü êáôÜ ôç äéÜñêåéá çëåêôñïèýåëëáò.  
Ôï öéò ôïõ êáëùäßïõ ñåõìáôïëÞðôç ðñÝðåé íá óõíäåèåß óå ìéá ðñßæá ìå óùóôÞ  
êáëùäßùóç êáé ãåßùóç.  
ÊÜèå óõóêåõÞ óôçí ïðïßá óõíäåèåß áõôü ôï ðñïúüí ðñÝðåé åðßóçò íá óõíäåèåß óå ðñßæá  
ìå óùóôÞ êáëùäßùóç êáé ãåßùóç.  
Ãéá íá áðïìïíþóåôå ôçí ïèüíç áðü ôçí ðáñï÷Þ ñåýìáôïò, ðñÝðåé íá áöáéñÝóåôå ôï öéò  
áðü ôçí ðñßæá. Ç ðñßæá ðñÝðåé íá åßíáé óå óçìåßï åýêïëá ðñïóâÜóéìï.  
TEHLIKE  
Elektrik çarpmasý tehlikesinden kaçýnmak için:  
Kapaklarý çýkarmayýnýz.  
Bu cihazý kaidesine takýlý durumda deðilken çalýþtýrmayýnýz.  
Bu cihazý elektriksel fýrtýna sýrasýnda prize takmayýnýz veya prizden çýkarmayýnýz.  
Elektrik kablosunun fiþi, elektrik ve toprak baðlantýlarý usulüne uygun olarak yapýlmýþ bir prize  
takýlmalýdýr.  
Bu cihazýn baðlanacaðý diðer tüm cihazlar da elektrik ve toprak baðlantýlarý usulüne uygun  
olarak yapýlmýþ prize takýlmýþ olmalýdýr.  
Monitörün elektrikle baðlantýsýný kesmek için fiþini prizden çekmeniz gereklidir. Priz, kolayca  
eriþilebilecek bir yerde olmalýdýr.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Hardware Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Workplace Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Working Practices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Handling Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Connecting your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Switching on your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Adjusting the Monitor Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Caring for your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Configuring your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Automatic Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Setup Diskette for Windows 95 or Windows 98 . . . . . . . . . . . . . . . . . . . . . . . . 6  
Auto Setup for the PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Auto Setup for DOS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Auto Setup for Windows 3.1, Windows 95, Windows 98 or Windows NT . . . . . 9  
Auto Setup OS/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Manual Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Adjusting Your LCD Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
User controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
On-screen display (OSD) controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Further Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Display modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Power Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Further Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Compliances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I  
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .IV  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
Hardware Requirements  
This monitor requires a computer with a suitable on-board sub-system or  
Video Adapter card that can support XGA 1024 × 768, SVGA 800 x 600, or  
VGA 640 x 480 at 60 Hz.  
Workplace Preparation  
This section gives advice  
on what you should  
Height  
The monitor should be positioned so that the top of the screen is slightly  
below your eye level when you sit at your workstation.  
consider before you set up your  
monitor.  
Orientation  
Choose a position that gives the least reflection from lights and windows,  
usually at a right angle to any windows. The monitor should be positioned  
directly in front of you so that you do not have to twist your body to use it. Tilt  
the monitor to a comfortable viewing angle.  
Working Practices  
This section gives  
advice on how you can  
work comfortably and reduce  
fatigue.  
Rest  
Take regular breaks. Vary your posture, stand up and stretch occasionally as  
prolonged use of computer workstations can be tiring.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Back  
You should sit back in your chair and use the backrest.  
Hands  
Use a light touch on the keyboard, keeping your hands and fingers relaxed.  
Allow a space in front of the keyboard to rest your wrists when not typing.  
Consider using a wristpad.  
Eyesight  
Working with monitors, in common with any prolonged close work, can be  
visually demanding. Look away from the screen periodically and have your  
eyesight checked regularly.  
Screen settings  
Set the screen brightness and contrast to a comfortable level. You may have  
to adjust this as the lighting changes during the day. Many application  
programs let you select color combinations which can help you to view in  
comfort. See the User controls section on page 14 for more information.  
Handling Instructions  
Do not support the monitor  
within the screen area. The  
1. Lift the monitor by placing both hands under the lower part of the cover.  
Liquid Crystal Display is glass  
and can be damaged by rough  
handling or excessive pressure.  
2. Before using your monitor for the first time, remove the clear protective  
film from the front of the screen.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting your Monitor  
Be sure to read the  
‘Safety Information’ at  
the front of this User Guide  
before carrying out this  
procedure.  
1. Turn off your PC and all attached devices.  
2. Connect the signal cable to the video port on the back of your computer.  
This port might be directly attached to your computer (figure A), or it  
might be part of a video adapter card (figure B). The video port on your  
computer or video adapter card may be colored blue to match the blue  
connector on your monitor’s video cable.  
The AC adapter and signal  
cable are connected to  
your monitor. If you wish to  
change these or to fit a different  
stand, see Further Help on  
page 23.  
3. Connect the power cord to the power adapter first, then insert the plug  
into a properly grounded electrical outlet.  
Switching on your Monitor  
1. Switch on the power source and your computer.  
2. Switch on your monitor by pushing and releasing the power switch  
marked  
.
To switch off your monitor, push and release the power switch again.  
3. Turn on the monitor and then the computer.  
4. Run AUTO SETUP by following the instructions in the Configuring your  
Monitor section on page 6.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Adjusting the Monitor Position  
Viewing Angle  
You can tilt the screen backward and forward as shown below.  
Caring for your Monitor  
Be sure to turn off the power before you perform any maintenance on the  
monitor. Clean your monitor as follows:  
Gently wipe the covers and the screen with a soft cloth.  
Remove finger marks and grease with a damp cloth and mild detergent;  
do not use solvents or abrasives.  
Never use flammable cleaning material to clean your IBM monitor or any  
other electrical apparatus.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Configuring your Monitor  
Automatic Setup  
The Setup Utility included  
When you first use your monitor you must perform Automatic Setup (AUTO  
on the setup diskette is for  
displaying dot patterns. They do  
not replace or modify the display  
driver.  
SETUP). This procedure sets up your monitor to process the video signals from  
your computer without image discoloration or smearing. After you perform  
AUTO SETUP, the settings are stored and used each time you turn on the  
monitor.  
The Automatic Setup  
instructions require the  
monitor to be warmed up for 15  
minutes. This is not required for  
Setup Diskette for Windows 95 or Windows 98  
This section must be  
completed before  
continuing with the  
Windows 95 or Windows 98  
Auto Setup for the PC on  
page 7.  
To use the Plug and Play feature in Windows 95 or Windows 98, files should  
be loaded from the IBM Color LCD Monitor Installation diskette as follows:  
1. Turn off the computer and all attached devices.  
2. Ensure that the monitor is connected correctly.  
3. Turn on the monitor and then the system unit. Allow the system to boot  
into Windows 95 or Windows 98.  
Your computer’s Plug and Play code may warn you that your system  
hardware has changed. This probably means that it has detected your  
new monitor for the first time.  
4.  
Open the DISPLAY PROPERTIES window by clicking on START, SETTINGS,  
CONTROL PANEL and then double clicking on the DISPLAY icon.  
5.  
6.  
Select the SETTINGS tab.  
Select the CHANGE DISPLAY TYPE button.  
On LCD monitors, unlike  
CRTs, a faster refresh rate  
does not improve display  
quality. IBM recommends using  
either 1024 x 768 at a refresh  
rate of 60Hz or 640 x 480 at a  
refresh rate of 60Hz.  
7.  
Select the CHANGE MONITOR TYPE button.  
8. Insert the Setup diskette into drive A: and select the HAVE DISK button.  
9. Select OK.  
10. Choose IBM T55A monitor and select OK. The files will be copied from  
the diskette to your hard drive.  
11. Close all open windows and remove the diskette.  
12. Reboot the system.  
The system will automatically select the maximum refresh rate and  
corresponding Color Matching Profiles.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Auto Setup for the PC  
Before carrying out  
this section, it is very  
important that The Setup  
Diskette for Windows 95 or  
Windows 98 has been run.  
(see page 6)  
Locate the operating system installed on your PC in the table below and  
follow the appropriate instructions. You may choose to run AUTO SETUP for  
each operating system that you use. This means that if you sometimes use  
your monitor while running any version of Windows and sometimes also use it  
from within DOS (not a DOS window), you must run AUTO SETUP for both  
Windows and DOS. You may run versions of AUTO SETUP in any order.  
Operating System  
DOS  
Corresponding Auto Setup procedure  
Auto Setup for DOS on page 8  
Windows 3.1  
Windows 95  
Auto Setup for Windows 3.1, Windows 95,  
Windows 98 or Windows NT on page 9  
Windows 98  
Window NT  
Operating System/2 (OS/2)  
Auto Setup OS/2 on page 11  
If your PC does not run  
with the setup diskettes  
Before you begin AUTO SETUP for your PC:  
shipped with the monitor, refer  
to Manual Setup on page 13  
1. Make a backup copy of the setup diskettes supplied with the monitor.  
2. Make sure the PC’s video mode is set in the range of the supported  
screen resolution shown in the table on page 19.  
The AUTO SETUP process  
only applies to the current  
screen mode. When a new  
mode is selected, repeat this  
section to reset the monitor  
You should perform AUTO SETUP for each screen mode you use.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Auto Setup for DOS  
If the monitor is in standby  
mode (STANDBY ON), it  
1. Turn on the monitor first; then the PC.  
may automatically turn off while  
you are waiting for it to warm up.  
If this happens, switch off the  
monitor and switch it on again  
after a few seconds.  
If the message CHECK SIGNAL CABLE is displayed, or if nothing is  
displayed check:  
that the video interface cable is connected properly.  
the correct video adapter card is installed.  
the correct supported display mode is selected for your PC.  
If you are using PC-DOS/  
V, change to U.S. mode by  
typing ‘CHEV US’ and pressing  
ENTER at the command  
prompt.  
2. Wait approximately 15 minutes, until the monitor warms up.  
3. Insert the diskette labelled ‘IBM Monitor Installation Disk’ into the  
diskette drive.  
You must use DOS or  
OS.2 DOS Full Screen  
(not under Windows or  
OS/2 DOS window, OS/2  
window, or OS/2 full screen)  
when you run DOS Auto  
Setup.  
4. Display the command prompt screen of the DOS full-screen display.  
5. At the command prompt, type ‘A:’ and press ENTER.  
6. Type ‘TESTPATD’ and press ENTER.  
7. Select from the screen the number for the color or text mode you want to  
setup.  
8. Select from the screen the number for the video mode you want to  
setup.  
You may repeat this process for as many of the color and video modes  
as you need.  
the dot pattern varies with  
the screen resolution.  
9. When the dot pattern appears, press the OSD Enter button  
bottom of the monitor to display the initial OSD menu.  
at the  
If the screen flickers,  
repeat the setup several  
times until the flicker is  
minimised, or adjust it manually  
by following Manual Setup on  
page 13.  
10. Use an Arrow button (  
then press the OSD Enter  
or  
) to select the IMAGE LOCK icon  
button to access the function.  
11. Using an Arrow button (  
or  
), select AUTOMATIC and press the  
OSD Enter button  
. This activates the AUTO SETUP procedure, which  
will optimize the display settings with the provided dot-patterns.  
The screen will dim, blink on and off several times and you may notice  
small changes to the test pattern.  
12. When finished, the OSD main menu returns. Press the Exit button  
to exit from the OSD.  
13. Press the ESCAPE key to exit the test pattern program.  
14. Type ‘Exit’ at the command prompt to return to Windows.  
AUTO SETUP  
If you use other operating systems, perform the appropriate  
those systems, also: see  
for  
Auto Setup for Windows 3.1, Windows 95, Windows 98 or Windows NT  
Auto Setup OS/2  
on page 9 and  
on page 11  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Auto Setup for Windows 3.1, Windows 95, Windows 98 or Windows NT  
If the monitor is in standby  
mode (STANDBY ON), it  
1. Turn on the monitor first; then the PC.  
may automatically turn off while  
you are waiting for it to warm up.  
If the message CHECK SIGNAL CABLE is displayed, or if nothing is  
displayed check:  
that the video interface cable is connected properly.  
the correct video adapter card is installed.  
the correct supported display mode is selected for your PC.  
2. Wait approximately 15 minutes, until the monitor warms up.  
3. Drag the icon bar and tool bar, if they are displayed, to the bottom of the  
screen.  
4. Insert the diskette labelled ‘IBM Monitor Installation Disk’ into the  
diskette drive.  
The size and diversity of  
the dot pattern varies with  
the screen resolution.  
5. Check the operating system installed on your PC and follow the  
instructions from the table below.  
Operating  
System  
Step1  
Step2  
Step3  
Step4  
Windows 3.1  
Open  
PROGRAM  
MANGER  
Select  
FILE  
Select  
RUN  
Windows NT 3.5  
Type  
A:\TESTPAT’  
and press  
ENTER  
Windows 95  
Select  
START  
Windows 98  
Select RUN  
Windows NT 4.0  
6. When the test pattern appears, press the OSD Enter button  
bottom of the monitor to display the initial OSD menu.  
at the  
Position the mouse pointer  
at the bottom center of the  
screen. This allows AUTO  
SETUP to run properly  
7. Use an Arrow button (  
and press the OSD Enter button  
8. Using an Arrow button ( or  
OSD Enter button . This activates the AUTO SETUP procedure, which  
or  
) to select the IMAGE LOCK icon  
to access the function.  
), select AUTOMATIC and press the  
will optimize the display settings with the provided test pattern.  
The screen will dim, blink on and off several times, and you may notice  
small changes to the test pattern.  
To abort the AUTO SETUP function, press the ESC key.  
9. When finished, the OSD main menu returns. Press the Exit button  
once to exit from the OSD.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
10. Press the ESC key to return to Windows.  
You have completed the monitor setup for Windows. If you use other operat-  
AUTO SETUP  
ing systems, perform the appropriate  
for those systems, also: see  
on page 8.  
Auto Setup OS/2 Auto Setup for DOS  
on page 11 and  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Setup OS/2  
If the monitor is in standby  
mode (STANDBY ON), it  
1. Turn on the monitor first; then the PC.  
may automatically turn off while  
you are waiting for it to warm up.  
If the message CHECK SIGNAL CABLE is displayed, or if nothing is  
displayed check:  
that the video interface cable is connected properly.  
the correct video adapter card is installed.  
the correct supported display mode is selected for your PC.  
2. Wait approximately 15 minutes, until the monitor warms up.  
3. Insert the diskette labelled ‘IBM Monitor Installation Disk’ into the  
diskette drive.  
4.  
Select OS/2 SYSTEM, SYSTEMS SETUP, SYSTEM. Select SCREEN RESOLUTION  
1024 X 768 X 256.  
5.  
Select SCREEN REFRESH of 60HZ.  
6. Close SYSTEMS and restart your system.  
7. At the OS/2 command prompt, select the OS/2 FULL SCREEN command.  
8. Press mouse button 2 and select SETTINGS or PROPERTIES (depending on  
your OS/2 version).  
9.  
Select SESSION and then choose WIN-OS/2 FULL SCREEN.  
10. Open the OS/2 full-screen window.  
11. At the command prompt type A: and press ENTER.  
12. Type TESTPATS and press ENTER.  
The size and diversity of  
the dot pattern varies with  
the screen resolution.  
13. When the dot pattern appears, press the OSD Enter button  
the bottom of the monitor to display the initial OSD menu.  
along  
Position the mouse pointer  
at the bottom center of the  
screen. This allows AUTO  
SETUP to run properly.  
14. Use an Arrow button (  
and press the OSD Enter button  
15. Using an Arrow button ( or  
OSD Enter button . This activates the AUTO SETUP procedure, which  
or  
) to select the IMAGE LOCK icon  
to access the function.  
), select AUTOMATIC and press the  
will optimize the display settings with the provided test pattern.  
The screen will dim, blink on and off several times, and you may notice  
small changes to the test pattern.  
To abort the AUTO SETUP function, press the ESCAPE key.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
If the screen flickers,  
repeat the setup several  
times until the flicker is  
minimised, or adjust it manually  
by following Manual Setup on  
page 13.  
16. When finished, the OSD main menu returns. Press the Exit button  
to exit from the OSD.  
17. Press the ESCAPE key to return to the OS/2 Window.  
You have completed the monitor setup for OS/2. If you use other operating  
AUTO SETUP  
systems, perform the appropriate  
Auto Setup for Windows 3.1, Windows 95, Windows 98 or Windows NT  
Auto Setup for DOS  
for those systems, also: see  
on page 9 and  
on page 8.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Manual Setup  
Normally, you can complete the setup procedure using AUTO SETUP, however,  
if your screen image is still distorted after you perform AUTO SETUP or the  
setup diskette does not run on your system, perform MANUAL SETUP.  
If the monitor is in standby  
mode (STANDBY ON), it  
might automatically turn off  
while you are waiting for it to  
warm up.  
1. Have your monitor turned on for about 15 minutes, until the monitor  
warms up.  
2. Display the image you most frequently use on the screen.  
3. Press the OSD Enter button  
the initial OSD menu.  
4. Use an Arrow button (  
and press the OSD Enter button  
5. Using an Arrow button ( or  
press once to select COARSE. Left and right arrow adjustment  
or  
) to select the IMAGE LOCK icon  
to access the function.  
), select MANUAL, press  
and then  
indicators become illuminated (see page 17).  
6. Use the Arrow buttons to manually adjust to correct (as much as  
possible) for noise in the video signal then press  
changes.  
to save the  
7. Use an Arrow button to select FINE and press the  
button.  
8. Use the Arrow buttons again to tune the image to your liking.  
9. When finished, press the Exit button  
OSD.  
four times to exit from the  
You have completed the monitor setup.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Adjusting Your LCD Monitor  
User controls  
User control features  
Icon  
Control  
Exit  
Description  
Displays the OSD main menu  
Exits from menus and sub-menus  
Exits the OSD  
Displays the OSD main menu  
Moves the cursor to highlight icons and other  
options  
Left Arrow  
Displays the OSD main menu  
Moves the cursor to highlight icons and other  
options  
Right Arrow  
Displays the OSD main menu  
Enters menus and sub-menus and selects the  
highlighted option  
OSD Enter  
Power Switch  
Switches the monitor on and off  
Operation  
The image is already  
optimized for many display  
modes, however the user  
controls can be used to adjust  
the image to your liking.  
Press any of the OSD control buttons to display the main OSD menu.  
Use the Arrow buttons to move among the icons. Select an icon and press  
OSD Enter to access that function. If there is a sub-menu, you can move  
between options using the Arrow buttons, then press OSD Enter to select  
that function. Use the Arrow buttons to make adjustments.  
The settings are saved  
after adjustment and when  
exiting the OSD and will be  
effective thereafter.  
Press the Exit button to move backwards through the sub-menus and exit  
from the OSD.  
Note: After making adjustments, the Power indicator LED will briefly  
turn amber to indicate that the new value has been saved.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
OSD Lock / Unlock  
This feature allows you to secure the current control settings, while allowing  
the user to adjust Brightness and Contrast, so that they cannot be  
inadvertently changed. You can unlock the OSD controls at any time by using  
the same procedure.  
Push and hold the button for 10 seconds to Lock or to Unlock. When locked, a  
“LOCKED” message will be displayed.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On-screen display (OSD) controls  
The settings adjustable with the user controls are viewed through the On-  
Screen Display (OSD). Press any of the OSD buttons to activate the OSD.  
The LCD monitor needs  
time to become thermally  
Initial appearance of OSD  
stable the first time you turn it on  
each day. Thus, to achieve more  
accurate adjustments for  
parameters, allow the LCD  
monitor to warm up (be On) for  
at least 15 minutes before  
making any screen adjustments.  
BRIGHTNESS  
89  
OSD functions  
Controls and  
Adjustments  
OSD Icon  
Description  
Sub-menu(s)  
Adjusts brightness  
Brightness  
Contrast  
Adjusts contrast  
NO - Does not make the  
adjustment  
The image lock function is used to  
adjust the level of noise in the video  
signal which causes horizontal lines or  
areas on the screen where the image  
appears to be unstable and jitters or  
shimmers. This can be done  
Automatic  
Image Lock  
YES - Automatic  
adjustment  
automatically or manually.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls and  
Adjustments  
OSD Icon  
Description  
Sub-menu(s)  
Manual -  
Use the Arrow buttons to  
adjust away the  
interference. If  
Fine  
Coarse  
satisfactory results are  
not obtained using the  
Fine adjustment, use the  
Coarse adjustment and  
then use Fine again.  
This function may  
change the width of the  
display image. Use the  
H-Position function on  
the Image Position  
menu to center the  
display image on the  
screen.  
If your computer or video board  
supplies a signal rate and  
NORMAL - Image at  
normal size.  
addressability lower than 1024 × 768,  
this LCD monitor provides a scaling  
processor that can expand the  
addressability up to 1024 × 768.  
EXPANDED - Image  
enlarged to fill screen.  
Display  
Size  
Moves the screen left and right or up  
and down.  
H-POSITION  
V-POSITION  
COLOR MODE  
Image  
Position  
Mode 1  
(Cool White)  
Select the Color Mode you find most  
comfortable and then fine tune the  
colors using the User Color Mode  
menu, if necessary.  
Color  
Mode 2  
(Normal White)  
Mode 3  
(Warm White)  
USER COLOR  
MODE -  
Red  
Increases or decreases  
redness  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Controls and  
Adjustments  
OSD Icon  
Description  
Sub-menu(s)  
Green  
Blue  
Increases or decreases  
greenness  
Increases or decreases  
blueness  
Resets the Brightness, Contrast and  
Color settings.  
COLOR  
RESET  
NO - Does not make the  
adjustment  
Reset  
YES - Resets the color  
Resets the Image position settings  
GEOMETRY  
RESET  
NO - Does not make the  
adjustment  
YES - Resets the  
geometry  
Shows information about the  
addressability and the horizontal and  
vertical frequencies of the images  
received from the computer or video  
board.  
Information  
Language  
The language chosen affects only the  
language of the OSD. It has no effect  
on any software running on the  
computer.  
Select one of the five  
languages to use for the  
OSD.  
Changes the position of the OSD on  
the screen.  
H-POSITION  
V-POSITION  
OSD Menu  
Position  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Further Information  
Display modes  
The display mode the monitor uses is controlled by the computer. Therefore,  
you should refer to your computer documentation for details on how to  
change display modes.  
The image size, position and shape may change when the display mode  
changes. This is normal and the image can be readjusted using AUTO SETUP  
and the monitor controls.  
Unlike CRT monitors, which require a high refresh rate to minimize flicker,  
TFT technology is inherently flicker-free. If possible, configure your computer  
for 1024 × 768 addressability at 60Hz vertical refresh rate.  
For the display modes listed below, the screen image has been optimized  
during manufacture.  
Factory Set Display Modes  
Horizontal  
Frequency  
Addressability  
Refresh Rate  
640 × 350  
640 × 480  
640 × 480  
720 × 400  
800 × 600  
800 × 600  
832 × 624  
1024 × 768†  
1024 × 768  
1024 × 768  
70 Hz  
60 Hz  
75 Hz  
70 Hz  
75 Hz  
60 Hz  
75 Hz  
60 Hz  
70 Hz  
75 Hz  
31.5 kHz  
31.5 kHz  
37.5 kHz  
31.5 kHz  
46.9 kHz  
37.9 kHz  
49.7 kHz  
48.4 kHz  
56.5 kHz  
60.0 kHz  
† Recommended  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Power Management  
To benefit from power management, the monitor must be used in conjunction  
with a computer that implements the Video Electronics Standards  
Association (VESA) Display Power Management Signalling (DPMS)  
Standard.  
If your computer has  
previously been used with a  
CRT monitor and is currently  
configured to a display mode  
outside the range that the Flat  
Panel monitor can display, you may  
need to re-attach the CRT monitor  
temporarily until you have re-  
configured the computer,  
The power management feature is invoked when the computer recognizes  
that you have not used your mouse or keyboard for a user-definable period.  
There are several states as described in the table below.  
®
As an ENERGY STAR Partner, IBM has determined that this product meets the  
preferably to 1024 x 768 at 60Hz.  
®
ENERGY STAR guidelines for energy efficiency.  
IBM recommends that you switch off your monitor at the end of each working  
day, or whenever you expect to leave it unused for long periods during the  
day.  
Power  
Indicator  
Restoring  
Operation  
State  
Screen  
Normal  
Blank  
Compliance  
On  
Steady green  
Steady amber  
®
DPMS  
Standby  
Press a key or  
move the mouse.  
ENERGY STAR  
and NUTEK  
Flashing  
amber  
(0.5 sec.  
interval)  
®
DPMS  
Suspend  
Press a key or  
move the mouse. ‡  
ENERGY STAR  
and NUTEK  
Blank  
Blank  
Flashing  
amber  
(1 sec.  
interval)  
®
Press a key or  
move the mouse. ‡  
ENERGY STAR  
and NUTEK  
DPMS Off  
‡ There may be a slight delay before the picture reappears.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting  
If you have a problem setting up or using your monitor, you may be able to  
solve it yourself. Before calling your retailer or IBM, try the suggested actions  
that are appropriate to your problem.  
Possible  
Cause  
Problem  
Suggested Action  
Ensure that the electrical  
outlet and the monitor are  
both switched on.  
Check that the power cord  
is firmly plugged into the  
electrical outlet and the  
power supply unit.  
If the power cord plug has  
a removable fuse, replace  
it.  
Connecting  
your Monitor  
section on  
Screen is blank  
and power  
indicator is off  
No power to  
monitor  
page 4  
Try another power cord.  
Try another electrical  
outlet.  
User  
Screen is blank  
and power  
indicator is  
Brightness  
and Contrast  
may be too  
low  
Adjust brightness and  
contrast.  
controls  
section on  
page 14  
steady green  
Press any key on the  
keyboard or move the  
mouse to restore  
operation.  
Check the Power  
Management software on  
your computer  
Power  
Screen is blank  
and power  
indicator is  
The monitor is  
in the Power  
Management  
Standby state  
Management  
section on  
page 20  
steady amber  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Possible  
Cause  
Problem  
Suggested Action  
Reference  
Check that the signal cable  
is firmly connected to the  
computer.  
Check that no pins are  
bent in the signal cable  
connector.  
your Monitor  
The monitor is  
not receiving  
a video signal  
Screen is blank  
and power  
indicator is  
Flashing green  
every 0.5  
page 4  
Display mode  
of the  
computer is  
outside the  
range of the  
monitor  
Further  
Reconfigure the computer  
to use a supported display  
mode.  
second  
Information  
page 19  
Press any key on the  
keyboard or move the  
mouse to restore  
operation.  
Check the Power  
Management software on  
your computer.  
Screen is blank  
and power  
indicator is  
flashing amber  
every 0.5 or 1  
The monitor is  
in the Power  
Management  
Suspend or  
Off state  
Management  
page 20  
IMAGE LOCK  
in the OSD. Then select  
User  
Select  
menu  
There are  
noises in the  
video signal  
Image appears  
to be smeared  
For image problems, you  
may want to run AUTO  
SETUP again before consulting to  
this section. In most cases, AUTO  
SETUP can fix the problems. See  
Auto Setup for the PC on page 7  
for details.  
controls  
section on  
page 14  
MANUAL  
COARSE  
FINE/  
to adjust  
settings.  
User  
Image appears  
to be  
The Color  
setting may  
be incorrect  
controls  
section on  
page 14  
Adjust the Color settings.  
discolored  
The LCD contains over 2,300,000 thin-film  
transistors (TFTs). A small number of  
missing, discolored, or lighted dots may be  
present on the screen, which is an intrinsic  
characteristic of the TFT LCD technology  
and is not an LCD defect.  
A few dots are  
missing,  
discolored, or  
inappropriately  
lighted.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Further Help  
If you are unable to correct the problem yourself, you may seek further help  
as follows:  
Call the IBM HELPCENTER.  
In the US call 1-800-772-2227  
In Canada call 1-800-565-3344  
In other countries contact your dealer, retailer, or other IBM authorized  
Servicer.  
If possible, stay by your  
computer. Your Technical  
Support Representative may  
wish to go through the problem  
with you during the call.  
Before calling, please have available as much of the following information as  
possible:  
1. Model and serial number from the label on your monitor.  
2. Purchase receipt.  
3. Description of problem.  
4. Computer type and model.  
5. System configuration (hardware fitted, etc.).  
6. System BIOS version number.  
7. Operating System and version number.  
8. Display driver version number.  
9. Video Adapter Type.  
More help, late-breaking  
news and details of the  
Removing the stand and cables  
Alternative stands for your IBM Flat Panel Monitor may be available from  
specialist suppliers.  
latest accessories for these  
products may be found on the  
worldwide web at:  
This product is equipped with mounting facilities that conform to the VESA  
Flat Panel Monitor Physical Mounting Interface Standard (FPMPMI).  
accessories  
This product is shipped with the signal cable and the power cord attached to  
the monitor. If you want to use other cables for reasons such as having the  
monitor wall-mounted, follow the instructions below:  
Information about the Video  
Electronics Standards  
Association can be found on the  
worldwide web at:  
1. Disconnect the power cord from the wall outlet.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2. Carefully insert the head of a flathead (–) screwdriver into the slot visible  
along either side of the cable cover (a) and pry it off.  
3. Squeeze the sides of the hinge cover (b) and pull it off.  
4. Gently lift the stand cover (c) along the top and then slide it backwards  
and off the stand.  
5. Remove the signal cable and the power cord from the monitor by  
disconnecting the corresponding adapters. Carefully cut the plastic tie to  
free the power cord and remove the screw holding the power cord  
clamp.  
6. Lay the monitor facedown on a cushion and remove the six screws  
holding the hinge mechanism on the monitor. Lift off the hinge and base  
assembly.  
7. Insert the head of a flathead (–) screwdriver in the slot of one of the two  
VESA caps (d) and pry the cap off. Repeat the procedure on the other  
VESA cap.  
8. If you are installing an arm or wall-mounting device, follow the directions  
included with the device. If you are just changing your cables, continue  
with Step 9.  
9. Connect the signal cable and the power cord, then refit the power cord  
clamp in its original screwpost.  
10. Slide the stand cover back on the stand.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
11. Put the hinge cover back on, making sure that the straight side is at the  
top.  
12. Insert the three tabs at the top of the cable cover into the slots in the  
back of the monitor and push the cover into place.  
To obtain the correct cables and/or to get further instructions on installing  
them, call the IBM HELPCENTER at the above numbers or contact your  
dealer, retailer, or other IBM authorized Servicer.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
This color monitor (Type-model 9513-Axx) uses a 15-inch TFT LCD.  
Dimensions  
Width:  
Depth:  
Height:  
413 mm  
204 mm  
381 mm  
Weight  
Tilt  
14.3 lb. (6.5 Kg)  
Forward Tilt:  
Backward tilt:  
– 4°  
+ 41°  
Image  
Viewable Image Size:  
Maximum Height:  
Maximum Width:  
Pixel Pitch:  
15.0” (381 mm)  
228 mm  
304 mm  
0.297 mm (H) × 0.297 mm (V)  
Power Input  
Supply Voltage:  
90 - 260 Vac  
60/50 ± 3 Hz  
1.0 A at 120 Vac  
Max Supply Current:  
Power Consumption  
Normal Operation:  
DPMS Stand-by:  
DPMS Suspend:  
DPMS off:  
< 40 W  
Power consumption figures  
are for the monitor and the  
power supply combined.  
<
<
<
5 W  
5 W  
5 W  
Video Input  
Input Signal:  
Analog Direct Drive  
75 ohm 0.7 V  
1024 pixels (max)  
768 lines (max)  
80 MHz  
Horiz. Addressability:  
Clock Frequency:  
Communications  
VESA DDC:  
2 B  
Supported Display  
Modes  
VESA Standard modes  
between  
Horiz. Frequency:  
Vert. Frequency:  
(see page 19)  
30 kHz - 61 kHz  
56 Hz - 75 Hz  
Environment  
Temperature:  
Operating:  
Storage:  
10 to 35° C  
- 20 to 60° C  
- 20 to 60° C  
Shipping:  
Humidity:  
Operating:  
Storage:  
10 to 80%  
5 to 95%  
5 to 95%  
Shipping:  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Compliances  
Federal  
This equipment has been tested and found to comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection  
against harmful interference in a residential installation. This equipment generates, uses, and  
can radiate radio frequency energy and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation. If this equipment does cause  
harmful interference to radio or television reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try to correct the interference by one or more of  
the following measures:  
Communications  
Commission (FCC)  
Statement  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to which the receiver is  
connected.  
• Consult an IBM authorized dealer or service representative for help.  
Properly shielded and grounded cables and connectors must be used in order to meet FCC  
emission limits. Proper cables and connectors are available from IBM authorized dealers. IBM is  
not responsible for any radio or television interference caused by using other than recommended  
cables and connectors or by unauthorized changes or modifications to this equipment.  
Unauthorized changes or modifications could void the user’s authority to operate the equipment.  
Declaration of Conformity  
IBM Corporation  
Trade Name:  
Model No.:  
9513-AW*, 9513-AG*  
Samsung Electronics Co., Ltd.  
Responsible Party:  
Address:  
QA Lab of Samsung America  
85 West Tasman Drive  
San Jose, CA 95134 USA  
408-554-5124  
408-554-5191  
Telephone:  
Fax:  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  
(1) this device may not cause harmful interference, and (2) this device must accept any interference  
received, including interference that may cause undesired operation.  
Power Cords  
For your safety, IBM provides a power cord with a grounded attachment plug to use with this IBM  
product. To avoid electrical shock, always use the power cord and plug with a properly grounded  
power outlet.  
IBM power cords used in the United States and Canada are listed by the Underwriters  
Laboratories (UL) and certified by the Canadian Standards Association (CSA).  
For units intended to be operated at 115 volts: Use a UL listed and CSA certified cord set  
consisting of a minimum 18 AWG, type SVT or SJT, three conductor cord, a maximum of 4.5  
meters (15 feet) in length and a parallel blade, grounding type attachment plug rated 15  
amperes, 125 volts.  
I
Download from Www.Somanuals.com. All Manuals Search And Download.  
For units intended to be operated at 230 volts (U.S. use): Use a UL listed and CSA certified cord  
set consisting of a minimum 18 AWG, type SVT or SJT, three conductor cord, a maximum of 4.5  
meters (15 feet) in length and a tandem blade, grounding type attachment plug rated 15 amperes  
250 volts.  
For units intended to be operated at 230 volts (outside the U.S.): Use a cord set with a grounding  
type attachment plug rated 13 amperes (minimum), 250 volts. The cord set should be marked  
<HAR> and have the appropriate safety approvals for the country in which the equipment will be  
installed.  
As an ENERGY STAR® Partner, IBM Corporation has determined that this product meets the  
ENERGY STAR guidelines for energy efficiency.  
This monitor complies with TCO’95 guidelines.  
MPRII  
This product complies with Swedish National Council for Metrology (MPR) standards issued in  
December 1990 (MPRII) for very low frequency (VLF) and extremely low frequency (ELF).  
Hinweise  
Gemäß der Amtsblätter des BMPT Nm. 61/1991 und 6/1992 wird der Betreiber darauf  
aufmerksam gemächt, daß die von ihm mit diesem Gerät zusammengestellte Anlage auch den  
technicschen Bestimmungen dieser Amtsblätter genügen muß.  
Aus ergonomischen Gründen wird empfohlen, die Grundfarbe Blau nicht auf dunklem  
Untergrund zu verwenden (schlechte Erkennbarkeit,Augenbelastung bei zu geringem  
Zeichenkontrast).  
Aus ergonomischen Gründen sollten nur Darstellungen auf dunklem Hintergrund bei  
Vertikalfrequenzen ab 60 Hz (ohne Zeilensprung) benutzt werden.  
Die Konvergenz des Bildes kann sich auf Grund des Magnetfeldes am Ort der Aufstellung aus  
der krrekten Grundeinstellung verändern. Zur Korrektur empfiehlt es sich deshalb, die Regler an  
der Frontseite für H STAT und V STAT so einzustellun, daß die getrennt sichbaren Farblinien für  
Rot. Grün und Blau bei z.B. der Darstellung eines Buchstabens zur Deckung (Konvergenz)  
gelangen. Siehe hierzu auch die Erklärungen zu H STAT und V STAT.  
Industry Canada  
Compliance  
Statement  
This Class B digital apparatus meets the requirements of the Canadian Interference-Causing  
Equipment Regulations.  
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le  
matériel brouilleur du Canada.  
II  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOM  
IBM de México, S.A.  
IBM 9513-Axx TFT LCD Color Monitorr  
Planta de Manufactura  
416, Maetan-3Dong, Paldal-Gu  
Suwon City, Kyungki-Do, Korea  
442-742  
Hecho en Korea  
NOM - 018  
Consumo de Corriente1.5 A  
Frecuencia de Operacion50/60 Hz  
Rension de Alimentacion100-240 V  
European Union  
(EU) Statement  
This product has been tested and found to comply with the limits for Class B Information  
Technology Equipment according to CISPR 22 / European Standard EN 55022. The limits for  
Class B equipment were derived for typical residential environments to provide reasonable  
protection against interference with licensed communication devices.  
Properly shielded and grounded cables and connectors must be used in order to reduce the  
potential for causing interference to radio and TV communications and to other electrical or  
electronic equipment. Such cables and connectors are available from IBM authorised dealers.  
In accordance with EN 50082-1 1992, Performance Criterion A:, it should be noted that in the  
presence of certain electromagnetic fields, some screen jitter may be observed.  
III  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warranty  
For European warranty terms and conditions, refer to the enclosed IBM Warranty statement, Part  
Number 72H9623.  
Statement of  
Limited Warranty  
The warranties provided by IBM in this Statement of Limited Warranty apply only to Machines  
you originally purchase for your use, and not for resale, from IBM or your reseller. The term  
“Machine” means an IBM machine, its features, conversions, upgrades, elements, or  
accessories, or any combination of them. Unless IBM specifies otherwise, the following  
warranties apply only in the country where you acquire the Machine. If you have any questions,  
contact IBM or your reseller.  
Machine:  
IBM 9513 LCD Color Monitors  
3 years, including backlight  
Warranty Period*:  
• Contact your place of purchase for warranty service information  
Production Status  
Each Machine is manufactured from new parts, or new and serviceable used parts (which  
perform like new parts). In some cases, the Machine may not be new and may have been  
previously installed. Regardless of the Machine’s production status, IBM’s warranty terms apply.  
The IBM Warranty  
IBM warrants that each Machine 1) is free from defects in materials and workmanship and 2)  
conforms to IBM’s Official Published Specifications. The warranty period for a Machine is a  
specified, fixed period commencing on its Date of Installation. The date on your receipt is the  
Date of Installation, unless IBM or your reseller informs you otherwise.  
During the warranty period IBM or your reseller, if authorized by IBM, will provide warranty  
service under the type of service designated for the Machine and will manage and install  
engineering changes that apply to the Machine.  
For IBM or your reseller to provide warranty service for a feature, conversion, or upgrade, IBM or  
your reseller may require that the Machine on which it is installed be 1) for certain Machines, the  
designated, serial-numbered Machine and 2) at an engineering-change level compatible with the  
feature, conversion, or upgrade. Many of these transactions involve the removal of parts and their  
return to IBM. You represent that all removed parts are genuine and unaltered. A part that  
replaces a removed part will assume the warranty service status of the replaced part.  
If a Machine does not function as warranted during the warranty period, IBM or your reseller will  
repair it or replace it with one that is at least functionally equivalent, without charge. The  
replacement may not be new, but will be in good working order. If IBM or your reseller is unable to  
repair or replace the Machine, you may return it to your place of purchase and your money will be  
refunded.  
IV  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If you transfer a Machine to another user, warranty service is available to that user for the  
remainder of the warranty period. You should give your proof of purchase and this Statement to  
that user. However, for Machines which have a life-time warranty, this warranty is not transferable.  
Warranty Service  
To obtain warranty service for the Machine, you should contact your reseller or call IBM. In the  
United States, call IBM at 1-800-772-2227. In Canada, call IBM at 1-800-565-3344. You may be  
required to present proof of purchase.  
IBM or your reseller will provide certain types of repair and exchange service, either at your  
location or at IBM’s or your reseller’s service center, to restore a Machine to good working order.  
When a type of service involves the exchange of a Machine or part, the item IBM or your reseller  
replaces becomes its property and the replacement becomes yours. You represent that all  
removed items are genuine and unaltered. The replacement may not be new, but will be in good  
working order and at least functionally equivalent to the item replaced. The replacement  
assumes the warranty service status of the replaced item. Before IBM or your reseller exchanges  
a Machine or part, you agree to remove all features, parts, options, alterations, and attachments  
not under warranty service. You also agree to ensure that the Machine is free of any legal  
obligations or restrictions that prevent its exchange.  
You agree to:  
• obtain authorization from the owner to have IBM or your reseller service a Machine that you  
do not own; and where applicable, before service is provided :  
• follow the problem determination, problem analysis, and service request procedures that IBM  
or your reseller provide,  
• secure all programs, data, and funds contained in a Machine, and  
• inform IBM or your reseller of changes in a Machine’s location.  
IBM is responsible for loss of, or damage to, your Machine while it is 1) in IBM’s possession or 2)  
in transit in those cases where IBM is responsible for the transportation charges.  
Extent of Warranty  
IBM does not warrant uninterrupted or error-free operation of a Machine.  
Misuse, accident, modification, unsuitable physical or operating environment, improper  
maintenance by you, or failure caused by a product for which IBM is not responsible may void the  
warranties.  
THESE WARRANTIES REPLACE ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,  
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY  
AND FITNESS FOR A PARTICULAR PURPOSE. HOWEVER, SOME LAWS DO NOT ALLOW  
THE EXCLUSION OF IMPLIED WARRANTIES. iF THESE LAWS APPLY, THEN ALL EXPRESS  
AND IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE WARRANTY PERIOD. NO  
WARRANTIES APPLY AFTER THAT PERIOD.  
In Canada, warranties include both warranties and conditions.  
Some jurisdictions do not allow limitations on how long an implied warranty lasts, so the above  
limitation may not apply to you.  
V
Download from Www.Somanuals.com. All Manuals Search And Download.  
For European warranty terms and conditions refer to enclosed IBM warranty statement Part  
Number 72H9623.  
Référez-vous à la garantie IBM N° de référence 72H9623 pour les condtions de garantie  
européennes.  
Die europäischen Garantiebedingungen finden Sie in der beigefügten IBM-  
Gewährleistungserklärung, Teilenummer 72H9623.  
Los términos y condiciones de las garantías en Europa se recogen en la declaración de garantía  
adjunta del número de pieza IBM 72H9623.  
Per le condizioni e i termini de garanzia relativi ai paesi europei, consultare l’apposita  
dichiarazione IBM (numero di matricola 72H9623).  
VI  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Graco Heat Pump 332339B User Manual
Graco Swing Sets 1131 1132 1141 User Manual
Grizzly Biscuit Joiner G0452 User Manual
Haier Washer WNM1000TE User Manual
Harbor Freight Tools Drill 7528 User Manual
Hasbro Games 3 Minute Word Game User Manual
Hayter Mowers Lawn Mower 20187351 User Manual
Healthrider Treadmill HRTL19913 User Manual
Hotpoint Convection Oven SH 108 CX S User Manual
Hunter Fan Dust Collector 30832 User Manual