|
G544-3974-04
3130 Advanced Function Printer
IBM
Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Notices
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii
Communication Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
Related Publications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
x
What's New in This Release
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi
Chapter 1. Introduction to the 3130 Advanced Function Printer . . . . . . .
1
1
2
3
3
4
4
5
6
6
7
7
8
General Description
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Common Highlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Optional Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Host Environments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IPDS Application Environment
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operational Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Data Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fonts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Performance and Print Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Advanced Function Image and Graphics (IPDS Only) . . . . . . . . . . . . . . . .
Print Material and Paper Handling . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 2. Planning Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9
Implementation Plan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Additional Planning Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Chapter 3. Preparing the Processing Environment . . . . . . . . . . . . . . 13
Performance Considerations
Compatibility Considerations
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Attachments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
. . . . . . . 14
Advanced Function Presentation Licensed Programs (IPDS-Only)
Installing and Verifying AFP Programs . . . . . . . . . . . . . . . . . . . . . . 14
Conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
240-Pel to 300-Pel Migration Considerations (IPDS-Only)
. . . . . . . . . . . . 15
IOCA Images and IM Images . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
GOCA Objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Fonts
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Page Definitions and Form Definitions . . . . . . . . . . . . . . . . . . . . . . 16
Bar Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Overlay Generation Language/370 . . . . . . . . . . . . . . . . . . . . . . . . 17
AS/400 Migration Considerations (IPDS-Only) . . . . . . . . . . . . . . . . . . . 17
Bolding of Characters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Enlarge Print Function
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Box Draw Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Other Font Considerations
Chapter 4. Preparing the Physical Environment . . . . . . . . . . . . . . . . 19
Environmental Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Temperature and Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Altitude Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Ventilation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Copyright IBM Corp. 1994, 1996
Download from Www.Somanuals.com. All Manuals Search And Download.
iii
Heat and Airflow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Sound Levels
Power Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Physical Requirements
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Weight and Dimensions
Service Clearances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Physical Layout and Space Requirements . . . . . . . . . . . . . . . . . . . . 21
Installation Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Physical Installation Worksheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Chapter 5. Configuring the 3130
Printer Configuration Worksheet . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Other Configuration Considerations . . . . . . . . . . . . . . . . . . . . . . . . . 26
. . . . . . . . . . . . . . . . . . . . . . . . . 25
Font Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Data Stream Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
System Attachments
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Twinaxial Attachment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
. . . . . . . . . . . . . . . . . . . 27
Ethernet TCP/IP and NetWare Attachment
SDLC SNA Attachment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Token-Ring (SNA, TCP/IP, and NetWare) Attachment . . . . . . . . . . . . . 28
PC Parallel Attachment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Chapter 6. Ordering and Storing Supplies
. . . . . . . . . . . . . . . . . . . 29
Printer Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Selecting Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Ordering Supplies
Paper Parameters
Label Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Prepunched Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Paper Cassettes
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Preprinted Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Envelopes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Selecting, Testing, and Ordering Paper Forms . . . . . . . . . . . . . . . . . . . 36
Storing Paper and Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Appendix A. 3130 Font Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
IBM Core Interchange Resident Scalable Font Set (IPDS-Only) . . . . . . . . . 37
GCSGID Subsets for IBM Core Interchange Fonts . . . . . . . . . . . . . . . 39
IBM Core Interchange Resident Code Page Set . . . . . . . . . . . . . . . . 39
4028 Compatibility Resident Font Set (IPDS-Only)
. . . . . . . . . . . . . . . . 42
. . . . . . . . . . . . . . . . . . . . . . . . 43
Other Resident Fonts (IPDS-Only)
Compatibility Resident Code Page Set . . . . . . . . . . . . . . . . . . . . . . 44
IBM Coordinated Font Set (IPDS-Only) . . . . . . . . . . . . . . . . . . . . . . . 44
GCSGID Subsets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
DBCS Resident Raster Font Set (IPDS-Only)
DBCS Resident Scalable (Outline) Fonts (IPDS-Only)
. . . . . . . . . . . . . . . . . . . 45
. . . . . . . . . . . . . . 47
DBCS Resident Scalable Code Page Set . . . . . . . . . . . . . . . . . . . . . . 48
GCSGID Subsets for the DBCS Resident Scalable Font Set . . . . . . . . . . . 49
Default Font (IPDS-Only)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
AS/400 Bolding Function, Native and OfficeVision (IPDS-Only) . . . . . . . . . 50
PostScript Resident Font Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Adobe Type 1 Fonts
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Duplicate Type 1 Fonts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
iv 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Type 42 Fonts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
PCL5e Language Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
PCL5e Resident Font Set
Appendix B. Software and Hardware Requirements
. . . . . . . . . . . . . 59
Attachments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Intelligent Printer Data Stream (IPDS) Considerations . . . . . . . . . . . . . 60
PCL-5e and PostScript Considerations . . . . . . . . . . . . . . . . . . . . . . 61
PSF Support Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
PSF/MVS Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
PSF/VSE Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
PSF/VM Support
PSF For OS/400 Support
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Host Print Transforms for OS/400 . . . . . . . . . . . . . . . . . . . . . . . . . 64
PSF/2 Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
PSF for AIX Support
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
System Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Applications (IPDS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Token Ring Network Attachment . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Ethernet Network Attachment . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
PSF Support Summary
Attachment Hardware
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Appendix C. Plugs and Receptacles . . . . . . . . . . . . . . . . . . . . . . . 71
Bibliography . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Acronyms and Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Figures
1. 3130 Service Clearances . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
2. Prepunched Paper Clearances -- A4, B5, and Letter Size . . . . . . . . . 33
3. Prepunched Paper Clearances -- A3, B4, Legal, and Ledger Size . . . . 33
4. Preprinted Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
5. Envelope Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
6. Power Plugs by Country
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
7. Power Plugs and Corresponding Receptacles . . . . . . . . . . . . . . . . 72
Contents
v
Download from Www.Somanuals.com. All Manuals Search And Download.
vi 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Notices
References in this document to IBM products, programs or services do not imply
that IBM intends to make these available in all countries in which IBM operates.
Any reference to an IBM licensed product, program, or service is not intended to
state or imply that only IBM’s product, program, or service may be used. Any
functionally equivalent product, program, or service that does not infringe any of
IBM’s intellectual property rights may be used instead of the IBM product.
Evaluation and verification of operation in conjunction with other products, except
those expressly designated by IBM, is the user’s responsibility.
Any performance data contained in this document was obtained in a controlled
environment based on the use of specific data. The results that may be obtained in
other operating environments may vary significantly. Users of this document should
verify the applicable data in their specific environments. Therefore, such data does
not constitute a performance guarantee or warranty.
IBM may have patents or pending patent applications covering subject matter in
this document. The furnishing of this document does not give you any license to
these patents. You can send license inquiries, in writing, to IBM Corporation, IBM
Director of Licensing, 500 Columbus Ave, Thornwood, New York, 10594, United
States.
The IBM 3130 Advanced Function Printer meets the requirements of IEC 950, First
Edition, Amendments 1 and 2. The laser used in the 3130 complies with IEC 825
and EN 60825.
Communication Statements
Federal Communications Commission (FCC) Statement
Note: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause
harmful interference, in which case the user will be required to correct the
interference at his own expense.
Properly shielded and grounded cables and connectors must be used in order to
meet FCC emission limits. IBM is not responsible for any radio or television
interference caused by using other than recommended cables and connectors or by
unauthorized changes or modifications to this equipment. Unauthorized changes or
modifications could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Copyright IBM Corp. 1994, 1996
Download from Www.Somanuals.com. All Manuals Search And Download.
vii
The United Kingdom Telecommunications Act 1984: This apparatus is approved
under approval No. NS/G/1234/J/100003 for the indirect connections to the public
telecommunications systems in the United Kingdom.
Canadian Department of Communications Compliance Statement: This Class
A digital apparatus meets the requirements of the Canadian Interference-Causing
Equipment Regulations.
Avis de conformité aux normes du ministère des Communications du
Canada: Cet appareil numérique de la classe A respecte toutes les exigences du
Réglement sur le matériel brouilleur du Canada.
German Conformity Statement: Dieses Gerät erfüllt die Bedingungen der EN
55022 Klasse A. Für diese Klasse von Geräten gilt folgende Bestimmung nach
dem EMVG:
Geräte dürfen an Orten, für die sie nicht ausreichend entstört sind, nur mit
besonderer Genehmigung des Bundesminesters für Post und Telekommunikation
oder des Bundesamtes für Post und Telekommunikation betrieben werden. Die
Genehmigung wird erteilt, wenn keine elektromagnetischen Störungen zu erwarten
sind.
(Auszug aus dem EMVG vom 9.Nov.92, Para.3, Abs.4)
European Community (EC) Conformity Statement: This product is in conformity
with the protection requirements of EC Council Directive 89/336/EEC on the
approximation of the laws of the Member States relating to electromagnetic
compatibility. IBM cannot accept responsibility for any failure to satisfy the
protection requirements resulting from a non-recommended modification of the
product, including the fitting of non-IBM option cards.
Shielded Cables (European Statement): Properly shielded and grounded cables
and connectors must be used in order to reduce the potential for causing
interference to radio and TV communication and to other electrical or electronic
equipment. Such cables and connectors are available from IBM authorized
dealers. IBM cannot be responsible for any interference caused by using other
than recommended cables and connectors.
Statement for CISPR 22 Edition 2 Compliance: Warning: This is a Class A
product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
Japanese VCCI
viii 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Trademarks
The following terms are trademarks of the IBM Corporation in the United States or
other countries or both:
Advanced Function Presentation
MVS/SP
AFP
MVS/XA
AIX
AIX/6000
Application System/400
AS/400
OfficeVision
OfficeVision/400
Operating System/400
OS/2
Bar Code Object Content Architecture
OS/400
BCOCA
ES/3090
ES/4381
Personal System/2
PrintManager
PS/2
ES/9000
ES/9370
RISC System/6000
SAA
ESCON
GDDM
IBM
System/360
System/370
VSE/ESA
Intelligent Printer Data Stream
IPDS
Micro Channel
MVS/ESA
The following terms are trademarks or registered trademarks of other companies:
Trademark
Agfa
Company
Agfa-Gevaert A.G.
Agfa Rhombus
AXIS
CG Intellifont
CG Omega
CG Times
Agfa-Gevaert A.G.
AXIS Communication, Inc.
Miles, Inc.
Miles, Inc.
Miles, Inc. under license from Monotype
Corp. (Times New Roman).
International Typeface Corp.
International Typeface Corp.
International Typeface Corp.
International Typeface Corp.
Lexmark International, Inc.
AlphaOmega Typography Corp.
Novell Inc.
ITC Avant Garde Gothic
ITC Bookman
ITC Zapf Chancery
ITC Zapf Dingbats
Lexmark
Marigold
NetWare
PostScript
PCL-5
TrueType
Adobe Systems, Inc.
Hewlett Packard Co.
Apple Computer Co.
Univers
Windows
Linotype AG and Subsidiaries.
Microsoft Corp.
Notices ix
Download from Www.Somanuals.com. All Manuals Search And Download.
Related Publications
IBM 3130 Advanced Function Printer: User's Guide, S544-5337, describes how to
operate the 3130.
IBM 3130 Advanced Function Printer: Administrator's Guide, S544-5328, describes
job management, attachment configurations, font management, and other
considerations for the 3130.
IBM InfoPrint 60; 3130, 3160, and 3935 Advanced Function Printer: Attachment
Configuration Handbook, S544-3977, provides information to help you configure
your system for the 3130 attachment you use.
Important
Before the customer engineer can install the 3130, you must complete a
configuration worksheet for the attachment you plan to use. Simplified versions
of these worksheets are available in this book (see “System Attachments” on
page 26); however, for detailed worksheets, instructions, and examples, please
refer to the IBM InfoPrint 60; 3130, 3160, and 3935 Advanced Function Printer:
Attachment Configuration Handbook, S544-3977, If you do not have a copy of
the handbook, ask your marketing representative to obtain one for you.
For a list of publications that describe Advanced Function Page Printers and related
printing tools, see “Bibliography” on page 73.
For a more extensive listing of available publications, refer to Advanced Function
Presentation: Printer Information, G544-3290.
For more information about Advanced Function Presentation, refer to the Guide to
Advanced Function Presentation, G544-3876.
Contact your IBM marketing representative for information concerning the 3130, its
documentation, or its associated licensed programs.
x
3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
What's New in This Release
Most of the changes in this release concern attaching the 3130 to a Novell
NetWare network.
Copyright IBM Corp. 1994, 1996
Download from Www.Somanuals.com. All Manuals Search And Download.
xi
xii 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1. Introduction to the 3130 Advanced Function
Printer
Chapter Overview
This chapter describes the characteristics, functions, features, and components
of the 3130.
General Description
The 3130 is a cut-sheet, intermediate speed, non-impact, all-points-addressable
printer. It uses low-power laser, electrophotographic print technology, and is
capable of a volume-capacity of up to 200 000 impressions per month at speeds of
up to 30 impressions per minute.
The 3130 can print at a resolution of either 240 x 240 or 300 x 300 picture
elements (pels), and can be used for text, graphics, optical character recognition
(OCR), and bar code printing. Text, images, and electronic overlays can be placed
at any defined point on the page areas on which the 3130 can print.
The 3130 also features a high-speed RISC/6000-based control unit, which provides
the following benefits:
Ÿ The ability to process complex print jobs at high speed
Ÿ Expanded network attachment capability
Ÿ Improved paper handling.
The O1S and O2S models shown on the following page are no longer marketed.
They are shown for reference as current inventory machines.
Copyright IBM Corp. 1994, 1996
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Models
There are four models of the 3130: simplex, high-capacity simplex (two models),
and duplex.
Model (Model Number)
Comes Standard with This...
Ÿ One printer stand
Ÿ One top stacker
Ÿ One front 250-sheet input tray
Ÿ One side 500-sheet input tray
Simplex (01S)
Ÿ One top stacker
Ÿ Three front 250-sheet input trays
Ÿ One front 2000-sheet input tray
High-capacity Simplex (02S)
Ÿ Dual top stacker
Ÿ Two front 250-sheet input trays
Ÿ One front 2000-sheet input tray
Ÿ Upgradeable to Model 02D
Ÿ Replaces Models 01S and 02S
High-capacity Simplex (03S)
2
3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Model (Model Number)
Comes Standard with This...
Ÿ Dual top stacker
Ÿ Two front 250-sheet input trays
Ÿ One front 2000-sheet input tray
Duplex (02D)
Common Highlights
The following are available on all models of the 3130:
Ÿ Advanced function common control unit (AFCCU) with 24 MB of storage. You
can order additional memory in 16 MB increments up to 56MB maximum.
Ÿ Floppy disk drive
Ÿ Hard disk drive with resident fonts installed
Ÿ PC Parallel connector
Ÿ An Ethernet connector for one of the following optional Ethernet Transmission
Control Protocol/Internet Protocol (TCP/IP) and/or NetWare (SPX/IPX)
interfaces:
– 10BaseT (twisted pair)
– 10Base2 (thin)
– 10Base5 (thick)
Ÿ An additional interface slot for one of the following optional attachments:
– Twinaxial direct attachment
– Synchronous Data Link Control (SDLC) V.24 or V.35 with System Network
Architecture (SNA)
– Token Ring with SNA, TCP/IP, NetWare (SPX/IPX), or all three.
Ÿ The ability to process IPDS, PostScript and PCL-5e data streams.
Optional Features
Table 1 on page 4 summarizes the optional features available for both models of
the 3130. For details about obtaining these features, contact your marketing
representative.
Chapter 1. Introduction to the 3130 Advanced Function Printer
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 1. Optional Features
Feature
Comments
500-sheet side input tray
Adjustable to A4 and letter-size
paper only. Requires the side
input tray base.
500-sheet paper cassette
Adjustable to A4 and letter-size
paper only
250-sheet adjustable paper cassettes
Side input tray base
1500-sheet side output stacker
Additional memory
Up to two 16 MB increments
Relocation kit
Required for relocating the
printer
DBCS resident fonts
Envelope Feeder
IPDS only
Requires the side input tray
base
Host Environments
For a summary of host environments and support, see Appendix B, “Software and
Hardware Requirements” on page 59. For a summary of PSF support and host
software requirements, refer to Advanced Function Presentation: Printer
Information, G544-3290.
IPDS Application Environment
The 3130 supports IBM Advanced Function Presentation (AFP) software, a
collection of licensed programs that let application developers take advantage of
many special kinds of printing, including bar code and optical character recognition
(OCR) output. Three OCR fonts are available from IBM: OCR-A, OCR-B, and OCR
128. Many kinds of bar codes can be obtained. See “240-Pel to 300-Pel Migration
Considerations (IPDS-Only)” on page 15 for additional bar code considerations.
Advanced Function Presentation uses the Intelligent Printer Data Stream (IPDS) to
drive the printer. Refer to the Guide to Advanced Function Presentation,
G544-3876, for more information. The 3130 also supports PostScript and PCL-5e
data streams. See Appendix B, “Software and Hardware Requirements” on
page 59 for additional information about these date streams.
4
3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Operational Capabilities
The following list is an overview of the 3130 operator panel menu: through it, you
can see many of the operational capabilities available on the 3130. Refer to IBM
3130 Advanced Function Printer User's Guide for details about accessing and using
these capabilities. Refer to IBM InfoPrint 60; 3130, 3160, and 3935 Advanced
Function Printer: Attachment Configuration Handbook for details about configuring
the items shown (except for "Printer Configuration," see Chapter 5, “Configuring the
3130” on page 25).
Ÿ Help
Ÿ Trays/Stackers
Ÿ System Shutdown
Ÿ Supplies
Ÿ Attachments
– Twinaxial
– SDLC
– TCP/IP SYSTEM
– Token Ring
– Ethernet
– PC Parallel
– Application Setup
- IPDS
- NetWare
- LPR
- FTP
- TFTP
Ÿ Setup
– Print Quality Samples
– Print Demo Pack
– Machine Configuration
- Job Management
- Font Management
- Data Streams
Ÿ IPDS
Ÿ PostScript Emulation
Ÿ PCL Emulation
- Printer Configuration (see “Printer Configuration Worksheet” on
page 25.)
- Define Forms
- Machine Information
- Adjust Print (IPDS)
- Change Password
Ÿ Service
The following list summarizes some of the operational capabilities of the 3130:
Ÿ Standalone operation—the 3130 is designed to operate in an unattended
office environment. It does not require a dedicated operator for normal printing
tasks.
Ÿ Operator messages and actions—the 3130 has a 32-character display for
messages, operator instructions, setup options, and host-related status.
Ÿ Beeper—the 3130 has a beeper that can alert operators whenever the 3130
requires attention.
Chapter 1. Introduction to the 3130 Advanced Function Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Ÿ Problem indicators— LEDs on a printer icon at the left of the operator panel
indicate where a problem such as a paper jam occurs.
Ÿ Paper jam auto-eject drawers—after a paper jam, you can usually
automatically clear the jammed paper by opening one or two auto-eject
drawers.
Ÿ Traces—the 3130 can perform several kinds of traces, which record details
about printer activities and communications with the control unit and the
controlling computer system to assist service personnel.
Ÿ Print samples—several print sample masters are stored in the 3130 control
memory. Key operators can print these print samples whenever necessary to
sample print quality or solve problems.
Ÿ Authorization levels—You can have one or more persons designated as a
key operator. The key operator performs tasks such as configuring the printer,
cleaning the printer, adding new toner, and replacing supplies.
You can specify that certain operator actions be password-protected; in other
words, only the person who knows the password will be able to perform certain
key operator functions.
Ÿ Toner cartridge—the 3130 monitors the toner supply and alerts the operator
when it should be replenished. In addition, automatic toner recycling reduces
the amount of toner the 3130 uses.
Ÿ Error log—sensors and other error-checking hardware detect status in the
printer. Information about errors is displayed to the operator and logged for
use in correcting problems.
Data Security
The 3130 has the following data security features:
Ÿ You cannot read data from the 3130 back into the controlling computer system.
Ÿ You cannot print data that remains in memory after a job is finished.
Ÿ Images on the photoconductor are removed after each print.
Ÿ The control unit accepts commands from the host to erase all residual print
data and fonts from its memory.
Ÿ You can specify non-spooled mode for most ASCII jobs. Refer to IBM 3130
Advanced Function Printer System Administration Guide for more information.
If many of the printing applications for your company are confidential, consider
placing the 3130 in a controlled-access area.
Fonts
The 3130 supports the following for IPDS:
Ÿ The IBM strategic font set, which includes:
– The IBM Core Interchange Resident Scalable Font Set
– The 4028 Compatibility Resident Font Set
– The IBM Coordinated Font Set
6
3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Ÿ The DBCS Resident Raster, including DBCS Scalable Font Sets (as a
separately-orderable feature)
Ÿ A facility for adding and deleting fonts in the printer. Refer to IBM 3130
Advanced Function Printer System Administration Guide for more information
about managing fonts.
Ÿ Downloading fonts from the host.
For a more detailed description of each font set, see Appendix A, “3130 Font Set”
on page 37.
The 3130 supports the following for PostScript and PCL-5e fonts:
Ÿ Various resident fonts (see “PostScript Resident Font Set” on page 52 and
“PCL5e Resident Font Set” on page 55) You can print samples of resident
fonts from the printer. Refer to IBM 3130 Advanced Function Printer User's
Guide for printing out resident fonts
Ÿ (PostScript only) A facility for adding and deleting fonts in the printer. Refer to
IBM 3130 Advanced Function Printer Administration Guide for more information
about managing fonts.
Ÿ Downloading fonts from the host or server.
Performance and Print Quality
The 3130 prints up to 30 impressions per minute in either simplex or duplex mode
when using long-edge fed paper; it prints up to 15 impressions per minute for
short-edge fed paper. Table 2 on page 8 summarizes the types of paper you can
use and the maximum impressions per minute you can print.
Notes:
1. Actual printer performance is affected by a number of factors, including how
you configure the printer, the complexity of the data you print, the performance
of the host-system and the attachment you use, and the amount of available
memory.
2. The quality of printer output is affected by the paper you use and the
composition of the logical pages you print.
Advanced Function Image and Graphics (IPDS Only)
The 3130 can directly process advanced Image Object Content Architecture (IOCA)
images and Graphics Object Content Architecture (GOCA) graphics data, as
described in Mixed Object Document Content Architecture Reference, SC31-6802.
This, in turn, provides the following performance benefits:
Ÿ The 3130 can process compressed images and vector graphics data in the
GOCA format, thus reducing demand on attachment data transfer and host
storage.
Ÿ The 3130, rather than the host system, decompresses images and rasterizes
vectors, thus reducing host system processing cycles.
Ÿ The 3130 can perform arbitrary scaling operations or resolution correction for
scanned images, which allows some complex jobs to print at greater throughput
by increasing the overall data-processing speed of the printer.
Chapter 1. Introduction to the 3130 Advanced Function Printer
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Print Material and Paper Handling
The 3130 can use paper in a variety of sizes and weights, including preprinted
paper, perforated paper, three-hole punched paper, drilled paper, color stock, and
adhesive labels. The 3130 can accept paper with a basis weight of 64 to 160
grams per square meter (17 to 42 pounds). Paper is fed automatically from paper
trays and, after printing, is automatically placed in output stackers.
Table 2 summarizes the paper sizes the 3130 can use and indicates the feed
orientation and the number of impressions per minute for each paper size. See
“Selecting Paper” on page 30 for more information on print materials you can use.
Table 2. Paper Sizes
Paper Size
Feed Orientation
Impressions per Minute
Letter (8.5 x 11 in.)
Legal (8.5 x 14 in.)
Ledger (11 x 17 in.)
A4 (210 x 297 mm)
A3 (297 x 420 mm)
B5 (182 x 257 mm)
B4 (257 x 364 mm)
Long-edge
short-edge
Short-edge
Long-edge
Short-edge
Long-edge
Short-edge
30
15
15
30
15
30
15
Note: See “Envelopes” on page 34 for envelope sizes.
Paper input trays provide automatic, printer-controlled paper tray switching so you
can load unused paper trays while the printer is running. Prints are stacked in
output stackers, which collate printed pages face down and have offsetting
capability.
The duplex model of the 3130 lets you print both sides of paper without restacking
and refeeding the sheets.
8
3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2. Planning Overview
Chapter Overview
This chapter provides an overview of the planning process for installing a 3130
printer.
There are two basic types of planning required for installing and using the 3130:
physical planning and system planning.
Ÿ Physical planning consists of:
– Determining the location for the 3130
– Preparing a layout plan for the 3130
– Making sure all 3130 environmental, electrical, and space requirements are
met.
For more information, see Chapter 4, “Preparing the Physical Environment” on
page 19. In addition, IBM offers special assistance with physical planning.
Contact your IBM branch office for information.
Ÿ System planning consists of:
– (IPDS-only) Ordering the Advanced Function Presentation licensed
programs and updates required to use the printer.
– (IPDS-only) Installing and testing the licensed programs and AFP
resources.
– (PostScript and PCL5e-only) Installing colon files and drivers.
– Verifying that the host operating system is at the correct level.
– Incorporating the 3130 into the system configuration and completing the
configuration work sheets.
For more information, see Chapter 3, “Preparing the Processing Environment”
on page 13 and Chapter 5, “Configuring the 3130” on page 25.
Copyright IBM Corp. 1994, 1996
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Implementation Plan
Note
The following checklist contains many of the major tasks that must be
performed before and during 3130 installation. Use this checklist as a basis for
developing your own detailed implementation plan.
Also, note that the tasks you need to perform depend on whether or not you are
already running Advanced Function Presentation (AFP) programs.
Step One–Identify Team and Plan Layout
1. Identify the people who can prepare the physical site, identify and test
required software, and configure the host systems. Make sure to plan for
the 3130 and the attachment you use to connect it to your host system.
2. Order the 3130, including optional features you require, such as extra
memory.
3. Order any cabling, lines, equipment, or software you require for the
attachment you use to connect the 3130 to your host system.
4. (IPDS-only) Order the IBM Advanced Function Presentation licensed
programs required for your system. If you already use IBM Advanced
Function Presentation licensed programs, make sure that they are at the
service level required to support the 3130.
5. Make sure the host operating system is at the level required to support the
Advanced Function Presentation licensed programs and their updates
(IPDS) and printer drivers and colon files (PostScript and PCL5e).
6. (IPDS-only) Determine which printer resolution will be used, and ensure that
the host library resources (fonts, page segments, overlays, FORMDEFs,
and PAGEDEFs) are compatible with the printer resolution you select.
7. Prepare a plan for selecting and testing forms for use with the 3130.
8. Determine the location for the 3130 and arrange for any changes to the
site.
9. Identify the internal delivery route for the 3130.
10. Prepare a space layout plan.
11. Determine who will install the electrical wiring and outlets.
12. Create a conversion plan for line-printer data and electronic overlays.
13. Prepare a plan for creating, converting, and testing applications that will be
used with the 3130.
Step Two–Review Plans, Order Supplies, and Prepare Site
1. Review installation plans with the IBM installation planning representative.
See “Physical Installation Worksheet” on page 23 for the worksheet.
2. Order initial supplies for the 3130.
3. Ensure that attachment hardware is on order.
4. Schedule the installation of lines and equipment required for the
attachment.
10 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Schedule the installation of electrical wiring and outlets.
6. Ensure that required host system updates are installed.
7. Begin installing and testing the Advanced Function Presentation licensed
programs and updates on the host system.
Step Three–Review Progress of Site Preparation
1. Review site-preparation progress with the IBM installation planning
representative.
2. Ensure that the electrical wiring and outlets are being installed on schedule.
3. Ensure that the attachment lines and equipment is being installed on
schedule.
Step Four–Ensure that Site Preparation is Complete
1. Ensure that installation and testing of electrical wiring and outlet is
complete.
2. Ensure that all site preparation activity is complete.
3. Gather information for the configuration work sheets in Chapter 5,
“Configuring the 3130” on page 25 and schedule an NCP Generation if
needed.
Important
Before the customer engineer can install the 3130, you must
complete a configuration worksheet for the attachment you plan to
use. Completing the attachment worksheets usually requires input from
the personnel responsible for network and device driver configuration.
For detailed worksheets, instructions, and examples, refer to IBM
InfoPrint 60; 3130, 3160, and 3935 Advanced Function Printer:
Attachment Configuration Handbook, S544-3977. If you do not have a
copy of the handbook, ask your marketing representative to obtain one
for you. Information is also available on the Internet at
http://can.ibm.com/ibmprinters.
Step Five–Arrival of the 3130
1. Contact the customer engineer and arrange to have the 3130 installed.
2. Arrange to have the 3130 attached to the host system.
3. Complete tests of the Advanced Function Presentation licensed programs,
including the IBM-supplied installation verification procedures.
Additional Planning Tasks
Here are some other issues to consider before you install the 3130:
Ÿ Training. Who will need training on the 3130 and AFP? Who will conduct the
training sessions? When will training be scheduled?
Ÿ Implementation. How will the 3130 be phased into production? Which
applications will use the 3130 first?
Chapter 2. Planning Overview 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Ÿ Documentation. Which local procedures need to be changed? Who will be
responsible for changing local procedures? Who will need copies of IBM
hardware and software documents?
Ÿ Supplies. How large should the initial 3130 supply order be? What is the
local procedure for ensuring that supplies are kept in stock? What is the
anticipated usage of the 3130?
12 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3. Preparing the Processing Environment
Chapter Overview
This chapter contains information to help system programmers integrate the
3130 into the existing processing environment. The basic hardware, software,
and application requirements for the 3130 are described in Appendix B,
“Software and Hardware Requirements” on page 59.
Performance Considerations
Ÿ The quality of 3130 output is affected by the paper you use and the
composition of the logical pages you print. To ensure printing legibility in your
application, test small (4-point) fonts and special characters such as logos in
your application. Refer to the IBM Advanced Function Printer Cut-Sheet Paper
Reference for information about these considerations.
Ÿ The following factors affect the performance of the system and directly affect
communication to the 3130:
– Speed of the computer system
– Amount of available memory
– Priority of tasks assigned in the system
– Control program used to drive the printer
– Attachment type and line speed.
Ÿ Consider the following when setting up your host-attachment configuration:
– Before attaching the 3130 to non-IBM equipment, ensure that the
equipment supports the 3130. The equipment vendor can answer your
questions about configuration options and other attachment issues.
– High-speed, direct-access storage devices (DASD) are recommended for
spool data sets and library data sets, particularly for printing workloads
consisting of documents with many fonts and images.
– Printer performance is best when high-use devices are used on a separate
attachment from the 3130. Printer throughput can be degraded if the 3130
is attached with other high-use devices such as disk units, tape units, or
another 3130 that prints complex documents.
Ÿ Printer traces, which you can run to help diagnose problems with the
attachment, the software, or the printer microcode, run in the background while
the printer performs its normal operations, and may reduce throughput.
Ÿ When memory can hold fonts and images for several pages at one time,
performance improves substantially. Complex documents require more
memory and, therefore, can take longer to print.
Ÿ To minimize the downloading of fonts, consider using printer resident fonts
when possible. When using IPDS, also consider marking host fonts as "public"
to allow the printer to capture and internally cache frequently used non-resident
fonts. You can order up to 32MB of additional memory in increments of 16MB.
To order additional memory, contact your IBM marketing representative.
Copyright IBM Corp. 1994, 1996
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Compatibility Considerations
Here are some factors to consider if you are sending jobs from other page printers
to the 3130:
Ÿ (IPDS-Only) The 3130 supports fonts in the same format as those for the IBM
3160, 3820, 3825, 3827, 3828, 3835, and 3900 printers. User-modified or
user-created 3800 printer fonts are not compatible with the 3130 fonts.
Ÿ Although the 3130 can print edge-to-edge, consider registration and paper size
variations when defining the margins.
Ÿ The 3130 can print to the paper’s edge, but for the best print quality, margins
are recommended as follows:
Edges:
2.5 mm (0.1 in.)
Punched holes: 3 mm (1.2 in.)
Ÿ The 3130 default point of origin is the top left corner of the short side of the
media.
Attachments
Important
Attaching your 3130 to your host system requires configuration changes to the
host system. Depending on the type of attachment and the host system you
use, some configuration changes may need to be performed before the 3130
can be installed. Several 3130 configuration parameters require values that
match values in your host system; at the least, you need to be prepared to
provide these values to the customer engineer who installs the 3130. Refer to
IBM InfoPrint 60; 3130, 3160, and 3935 Advanced Function Printer: Attachment
Configuration Handbook for more details about configuring host systems.
Advanced Function Presentation Licensed Programs (IPDS-Only)
Some Advanced Function Presentation (AFP) licensed programs are required for
the operation of the 3130; others are optional. Work with your users to determine
which optional advanced functions they need. For a list of publications that
describe the programs you require for a particular environment, as well as a
summary of Advanced Function Presentation concepts, products, and benefits,
refer to the Guide to Advanced Function Presentation, G544-3876.
Installing and Verifying AFP Programs
Install and verify AFP programs before you install the 3130. The licensed programs
include verification procedures to help you install the software correctly. In addition,
the system programmer is responsible for:
Ÿ Creating the resources (page definitions, electronic overlays, form definitions,
and page segments) that the resource libraries will contain.
Ÿ Creating or modifying the PSF startup procedure to include resource libraries
and attachment information.
Ÿ Enabling printer resident fonts, if necessary.
14 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Conversion
If Advanced Function Presentation is available on another printer, you may want to
begin the conversion effort before you install the 3130. Some tasks to consider
include:
Ÿ Changing font character sets
Ÿ Converting line-printer applications to page-printer applications
Ÿ Converting preprinted forms to electronic overlays
Ÿ Creating new applications by using electronic overlays
Ÿ Enhancing existing applications to take advantage of 3130 functions
Ÿ Investigating applications that have special programming requirements.
240-Pel to 300-Pel Migration Considerations (IPDS-Only)
The 3130 can print at 240-pel or 300-pel resolution. Usually, converting from
240-pel to 300-pel resolution requires little effort. You may need to evaluate
applications that create complex printed pages with images, multiple fonts,
graphics, and overlays for visual differences that occur at 300-pel resolution.
The following sections describe some more issues to consider if you choose to
migrate from 240-pel to 300-pel resolution.
IOCA Images and IM Images
The 3130 printer supports image printing in one of two formats: IM image or IOCA
image. If you print at 300-pel resolution, 240-pel IM images are automatically
converted to IOCA and scaled to 300-pels.
While the 300-pel image and the 240-pel image will be the identical size, you may
see some differences in the shading, diagonal lines, and curves of the image.
Applications that produce images that are sensitive to exact duplication should be
tested before migrating them to 300-pel resolution.
GOCA Objects
Graphical objects defined with vectors should look the same at 240-pel or 300-pel
resolution because the 3130 builds the bit map for GOCA objects.
Fonts
When migrating print workload to the 3130, first determine if the fonts used by the
application are resident in the 3130 or supported by the IBM PSF software as
300-pel raster fonts. Appendix A, “3130 Font Set” on page 37 details the fonts
that the 3130 supports.
If the font you need is supported by the 3130, the 300-pel version of the font will be
provided either from the resident outline font library or from the host raster-font
library, to be downloaded from the host.
Chapter 3. Preparing the Processing Environment 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
1. For MVS, make sure to use the PSF APSRMARK utility to mark the resident
fonts before you use them. PSF/MVS also ships another utility, APSRCF30,
which you can use to convert 240-pel fonts to 300-pel fonts.
2. For VSE, make sure to use the PSF APTRMARK utility to mark the resident
fonts before you use them. PSF/VSE also ships another utility, APTVCF30,
which you can use to convert 240-pel fonts to 300-pel fonts.
See “PSF Support Notes” on page 62 for more information. Refer to PSF/MVS:
System Programming Guide and PSF/VSE: System Programming Guide for
information about these utilities. To create fonts from Adobe Type 1 fonts, you can
use the Type Transformer, which is shipped with PSF/2.
The 3130 300-pel printed output will have the same line and page endings, but the
right margins may not perfectly match those of the 240-pel version. For example,
the typical line variation for a 12-point font is ± 13 mm (0.05 in.) or about one-half a
character width.
If the font requested is not supported by the 3130 or by PSF, you can use either a
supported substitute font or obtain a 300-pel version of the font from a font vendor.
If you use a substitute font, the line endings, page endings, and right margins may
be different from the 240-pel printed version.
Page Definitions and Form Definitions
Page definitions and form definitions often contain images and fonts that are
dependent on resolution. Check these resources to see if they specify fonts,
overlays, and page segments that need to be considered for migration or
conversion. Also, overlays can specify other objects such as fonts and page
segments that may need to be considered for migration or conversion.
Bar Codes
The 3130 can print the following types of bar codes:
Ÿ BCOCA - If the print data set was designed to run on a printer with BCOCA, it
can be run with little or no change on a 3130. Some bar codes may print
slightly differently on the 3130. Some differences include:
– The 3812, 3816, and 4028 insert a blank area (called a quiet zone) at the
beginning of the bar code area. Other printers, such as the 3130, 4224,
4230, and 4234 do not.
– The Code128 modifier may print in a different position with the 3130.
– EAN2, EAN5, UPC2, and UPC5 bar codes may print larger than they did
on previous printers.
See the reference materials for your software and printers for more specific
details on bar code implementation. For implementing BCOCA bar codes, see
your application software documentation for information.
Ÿ Bar Codes Generated by DCF - When a program such as Document
Composition Facility (DCF) is used to generate bar codes using draw rules, the
output should be tested on the 3130 with the scanning equipment used for
reading the bar codes. The different resolution of the printer may cause very
slight differences in the placement of the bar code components.
16 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Ÿ Bar Code Fonts - Non-resident bar code fonts also may be used. Check with
your font vendor for the availability of the desired 300-pel rasterized bar code
fonts.
Overlay Generation Language/370
With the Overlay Generation Language/370 (OGL/370), you can define overlays
used to create forms. The overlay components (offsets, line lengths, line thickness,
radii, and so on) are automatically scaled by the 3130 with the PSF software.
Some differences may occur with slight “stair-stepping” effects for diagonal lines
with rounded corners and some shading changes.
In addition, overlays created with OGL can specify other resources such as fonts
and page segments which may need to be considered for migration or conversion.
You should test applications using OGL/370 before migrating them to the 3130.
AS/400 Migration Considerations (IPDS-Only)
Here are some things to consider if you migrate your print workload to a 3130
attached to an AS/400 operating in the OS/400 environment.
Bolding of Characters
Both OfficeVision and Data Description Specification (DDS, the native OS/400 key
word HIGHLIGHT function) enable you to make characters bold by using a font
modification parameter. The printer automatically prints the indicated characters
bold for any font supported by the printer. The 3130 printer supports this same
function for the set of fonts resident in the printer that have bold versions. See
“AS/400 Bolding Function, Native and OfficeVision (IPDS-Only)” on page 50 for a
list of the 3130 fonts and what will occur when the bolding function is invoked.
Note: Note that bolding may cause changes to line length, and in some cases
may cause information to exceed the page width.
Enlarge Print Function
OfficeVision/400, the Advanced Function Presentation Utilities/400 and the Data
Description Specification (DDS, native OS/400) keyword for CHRSIZ enable you to
direct the printer to enlarge characters. This function is not supported on the 3130
using fonts selected by FGID (Font Global ID). This function is only supported
under DDS if you use GDDM fonts. GDDM fonts are selected by name, such as
ADMVMOB for Multinational Open Block.
Box Draw Function
OfficeVision lets you draw boxes with the cursor and then print them as drawn.
The 3130 supports this function if you specify ON for the AS/400 Box Draw
Enhancement printer configuration item. If you specify OFF for the AS/400 Box
Draw Enhancement printer, boxes drawn with OfficeVision will have breaks in them.
Note: To draw boxes correctly, the 3130 substitutes code page 1091 for code
page 259.
Chapter 3. Preparing the Processing Environment 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Font Considerations
IPDS, PostScript and PCL5e fonts are listed in Appendix A, “3130 Font Set” on
page 37 and are resident in the 3130.
Your job can download fonts not listed if you have them on your host system and
your job requires them. Usually, the printer stores them in RAM and deletes them
whenever the 3130 is powered off. However, the printer can store downloaded
IPDS fonts on the hard disk.
A facility in the printer allows you to add fonts from a diskette to the hard drive and
avoid losing them at power off. It also allows you to delete fonts from the hard
drive. The fonts are:
For PostScript: Type 1 fonts
For IPDS:
AFP outline fonts containing either Type 1 or Character
Identifier (CID)-keyed technology
For PCL:
TrueType or Intellifont fonts
18 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4. Preparing the Physical Environment
Chapter Overview
This chapter describes the environmental, power, physical, and space
requirements you must meet before you install the 3130. It includes an
installation planning worksheet.
Environmental Requirements
Temperature and Humidity
Table 3 lists the permitted temperature and relative humidity values for the 3130.
Operating the 3130 above or below these ranges may result in poor print quality
and degraded paper handling.
Table 3. 3130 Temperature and Humidity Ranges
Temperature
Relative Humidity
20 to 80%
With Power On
16 to 32°C (60 to 90°F)
10 to 43°C (50 to 109°F)
-10 to 40°C (14 to 104°F)
With Power Off
8 to 80%
Shipping and Storage
5 to 90%
Altitude Range
Ventilation
The altitude range permitted for 3130 operation is sea level to 2100 meters (7000
feet).
The 3130 operates best in an air-conditioned computer room with year-round
humidity control and recirculated, filtered air. Dust and other contamination can
cause machine problems.
To reduce any health risks associated with preprinted forms, follow IBM preprinted
forms recommendations and provide appropriate ventilation to the printer area. The
American Society of Heating, Refrigeration, and Air Conditioning Engineers
(ASHRAE) recommends a minimum of 0.42–0.57 metersó/minute
(15–20 ftó/minute) per person of outdoor air make-up for an office size of 12 ft x 12
ft x 8 ft (32.4 Meteró) during human occupancy (ASHRAE 62–1989).
For information about selecting and safely using preprinted forms, refer to the IBM
Advanced Function Printer Cut-Sheet Paper Reference.
Heat and Airflow
Average heat dissipation of the 3130 while printing is less than 930 Kcal/hour (3690
BTU/hour) based on 1.08kVA for the printer.
No airflow restrictions apply if the 3130 is installed according to the guidelines and
floor plans established in this document.
Copyright IBM Corp. 1994, 1996
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Sound Levels
The upper limits for sound level are shown in Table 4.
Table 4. 3130 Sound Levels
Printer Condition
Idle
Sound Level
6.4 bels (55 dBA)
7.2 bels (46 dBA)
Operating
Power Requirements
Attention
Do not connect the 3130 to any 380—415 IT power distribution system
(impedance grounded neutral system).
Make sure that your installation meets the electrical power requirements listed in
Table 5 before the printer is delivered. In addition:
Ÿ Reserve a dedicated electrical outlet to support the printer and to allow the
printer to be disconnected from power. This can be:
– A compatible receptacle installed near the 3130.
– A circuit breaker that breaks all live poles. This circuit breaker must be
dedicated to the 3130 printer.
Ÿ Provide electrical outlets for auxiliary equipment, such as modems or
communication modules. If necessary, make sure a telephone line and jack
are available.
Ÿ The 3130 is equipped with an approved plug for your safety. Use it in
conjunction with a properly grounded receptacle. Refer to Appendix C to find
out which type plug is supplied in your country.
Table 5. 3130 Power Source Requirements
Item
North American and
European Requirements
Japanese Requirements
Nominal Voltage
100V, 115V ac ±10%, single
phase, two wires plus ground
220V, 230V, and 240V ac
±10%, single phase, two wires
plus ground
Nominal
50/60 Hz ±1.0%
50/60 Hz ±1.0%
Frequency
Input Current
Power Input
10 amperes
1.08 kVA
5.2 amperes
1.08 kVA
Power Dissipation
The 3130 can enter a power-save mode after a specified time has elapsed with no
printer activity. When the 3130 enters power-save, it removes power from all
printer subsystems. Normal operation resumes when the printer receives a host
command.
20 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 6. 3130 Power Dissipation
Mode
Power Usage
900 watts
Printing
Standby
Power Saving
220 watts
100 watts
Physical Requirements
Weight and Dimensions
The standard simplex model O3S weighs 154 kg (337 lb); the standard duplex
model O2D weighs 156 kg (343 lb).
The dimensions of the 3130 are:
Standard Paper Handling
Fully Featured Paper
Handling
Width
Depth
Height
654 mm (26 in.)
640 mm (26 in.)
1385 mm (54 in.)
1353 mm (53 in.)
640 mm (26 in.)
1385 mm (54 in.)
Service Clearances
The service clearances required for the 3130 are:
Front
Rear
Left
1295 mm (51 in.)
910 mm (36 in.)
760 mm (30 in.)
760 mm (30 in.)
Right
Physical Layout and Space Requirements
Figure 1 on page 22 shows the space requirements for a permanent installation.
As you plan your physical layout:
Ÿ Install the 3130 away from the main traffic pattern. Allow space for key
operators and customer engineers to perform their tasks. This space should
not extend into walkways.
Ÿ Install the 3130 in a location that is convenient for the key operator and other
users. For example, consider whether the planned location is close to printer
supply storage areas and to output distribution areas.
Ÿ Allow 2.1 meters (83 in.) between the floor and the lowest permanently
attached object above the 3130, such as a light or a cable rail. This layout
gives printer operators and customer engineers space in which to work.
Ÿ Check the route that the 3130 must travel from your loading dock to the
location where it will be installed, to make sure it fits through the doorways and
halls. When possible, move the printer from the dock to its installation location
on its shipping pallet.
Chapter 4. Preparing the Physical Environment 21
Download from Www.Somanuals.com. All Manuals Search And Download.
A
C
t
a
t
a
b
c
l
h
m
L
e
o
n
c
t
a
I
n
o
t
n
e
r
f
a
c
e
e
t
i
P
L
o
o
w
c
e
a
r
i
C
n
a
b
l
e
1
5
c
m
(
6
i
n
.
)
t
o
9
3
1
6
c
i
m
O
P
p
o
e
s
r
a
t
t
i
i
o
n
n
g
(
n
.
)
i
6
2
4
5
.
1
2
c
m
n
(
.
5
0
i
.
)
S
P
e
o
r
s
v
i
i
c
o
e
n
S
i
d e
t
i
S
t
a
c
k
e
r
7
(
6
0
c
i
m
.
3
n
)
t
7
6
0
c
i
m
.
(
3
n
)
5
0
-
s
h
e
e
C
a
s
s
e
t
t
e
D
i
m
e
n
A
s
i
o
n
1
2
(
9
5
.
1
5
c
.
m
i n
)
Figure 1. 3130 Service Clearances
Dimension A Values:
Dimension
Configuration
654 mm (25.75 in.) Base printer
356 mm (14 in.)
343 mm (13.5 in.)
Add to base printer for side stacker
Add to base printer for 500-sheet cassette
Installation Requirements
Procedures for installing the 3130 are included with the printer and in the 3130
Advanced Function Printer: Maintenance Information. This section describes only
physical installation requirements. See “Implementation Plan” on page 10 for
complete planning information. The installation is done by a service person;
however, the customer is responsible for the following pre-installation requirements:
Ÿ Make sure the environmental, electrical, and space requirements specified in
this chapter are met. Use the “Physical Installation Worksheet” on page 23 to
complete this step.
Ÿ Make sure the receiving area and internal delivery route contain no obstacles
that might interfere with moving the 3130 to its planned location.
– Halls and doorways must be large enough for the printer to pass through,
and corners and angles must be large enough to permit the printer to turn.
For example, the minimum doorway opening through which the 3130 can
pass from a 91.5 cm (36 in.) wide aisle is 75 cm (30 in.).
– Ramps must have no more than 12 degrees, 50 minutes incline to allow
clearance for the lower edge of the printer with its supporting feet retracted.
22 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
– Elevators and elevator doorways must be able to accommodate the size
and weight of the printer and the people who are moving it.
– Stairs, sills and gaps, and carpeting can make it difficult to roll the printer.
Ÿ Do not tilt the printer past a 15° angle.
Ÿ Ensure that the floor is level within ±1.5° from earth horizontal in any plane.
Ÿ Ensure that an approved electrical outlet with correct power is reserved for the
3130, and that it can be reached with the power cable.
Ÿ If the 3130 is being installed in an area with a raised floor, ensure that the
access hole in the raised floor is large enough for both the communication
attachment cables and the power cable.
Physical Installation Worksheet
Before your 3130 is delivered, prepare a site installation plan. Use the following
worksheet (Table 7) to ensure that all of the pre-installation requirements are met.
Table 7. Physical Installation Worksheet
Requirements
Meets
Needs
Assigned to
Date Due
Date
Requirements
Attention
Completed
Environmental
Ÿ Ventilation
________
________
________
________
________
________
________
________
________
________
________
________
________
________
________
Ÿ Temperature
Ÿ Relative humidity
Space
________
________
________
________
________
________
________
________
________
________
________
________
________
________
________
________
________
________
________
________
Ÿ Layout
Ÿ Supplies storage space
Ÿ Clearances
Ÿ Delivery route
Electrical
________
________
________
________
________
________
________
________
________
________
________
________
________
________
________
________
________
________
________
________
________
________
________
________
________
________
________
________
________
________
________
Ÿ Voltage
Ÿ Outlets:
– Reached by cables?
– Correctly grounded?
– Meet local and
national codes?
Ÿ Building branch circuit:
– Correctly grounded?
– Enough power to
meet needs?
– Meets local and
national codes?
________
________
________
________
________
________
________
________
________
________
________
________
________
________
________
________
Host Attachment
Ÿ Cables
________
________
________
________
Ÿ Lines
Ÿ Other equipment
Security
________
________
________
________
Chapter 4. Preparing the Physical Environment 23
Download from Www.Somanuals.com. All Manuals Search And Download.
24 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5. Configuring the 3130
Chapter Overview
This chapter contains worksheets you can use to configure the 3130, and
descriptions of the attachments that connect host systems to the 3130.
Note: Before the customer engineer can install the 3130, you must complete all of
the appropriate attachment configuration worksheets.
The only worksheet in this manual is Printer Configuration. All attachment
worksheets, instructions, and examples are in the IBM InfoPrint 60; 3130, 3160,
and 3935 Advanced Function Printer: Attachment Configuration Handbook. If you
do not have a copy, ask your marketing representative to get you one.
Appendix B, “Software and Hardware Requirements” on page 59 summarizes the
host environments that support the 3130 and the attachments that run under each.
“Operational Capabilities” on page 5 summarizes the printer's menu; it shows
where the printer configuration appears in the structure.
Printer Configuration Worksheet
Printer Configuration includes duplex, sleep time, beeper languages, and print
density.
Fill in the requested information in Table 8, and give a copy to the customer
engineer when the 3130 is installed. The customer engineer will use the work
sheet to configure the 3130. You can change some of these options later.
The procedures for customer engineering to configure the printer are in IBM 3130
Advanced Function Printer Maintenance Information; the procedures for updating
the configuration are in IBM 3130 Advanced Function Printer User's Guide.
Table 8. Printer Configuration
Item
Available Values
Selected Value
DUPLEX
ENABLE or DISABLE
Up to 3 digits (minutes)
SLEEP TIME (MINUTES)
BEEPER
ERROR: TIMED BEEP, CONTINUOUS, OFF KEYS:
ON or OFF
LANGUAGE (For operator panel
display only)
ENGLISH, FRENCH, GERMAN, JAPANESE
(KATAKANA), ITALIAN, SPANISH, BRAZILIAN
PORTUGUESE, DUTCH
PRINT DENSITY
LIGHT, MEDIUM, or DARK
Duplex
Specifies duplex printing. This parameter applies only to the
duplex model.
ENABLE Print duplex
DISABLE Print simplex
Copyright IBM Corp. 1994, 1996
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Sleep time
Beeper
The length of time in minutes the printer waits before it goes
into sleep mode. Specify a value from 0 to 999. 0 means
the printer will never go to sleep.
A beeper sounds when the 3130 detects an error or when
keys are pressed during menu mode.
Ÿ You can set the error beeper to:
– Beep until any operator panel key is selected
– Beep for three minutes and then stop
– Never beep at all.
Ÿ You can set the keys beeper to on or off.
Language
The language used to display operator console text for
general users and key operators. Text for customer
engineers is in English only.
Print Density
An indication of the darkness of the print. Settings are
LIGHT, MEDIUM, or DARK. MEDIUM is the default value,
although some applications may run better with Optical
Density set to DARK.
Other Configuration Considerations
IBM InfoPrint 60; 3130, 3160, and 3935 Advanced Function Printer: Attachment
Configuration Handbook contains the configuration worksheets for the items that
follow. Items are included here as a reminder.
Font Management
The printer control unit allows you to add fonts, delete fonts, list the printer resident
fonts, and list fonts on the diskette.
A detailed description of managing fonts and how to do it is in IBM 3130 Advanced
Function Printer System Administration Guide.
Data Stream Configurations
The 3130 can process IPDS, PostScript, and PCL data streams simultaneously. To
ensure that the printer handles your jobs properly, complete the appropriate
worksheets in IBM InfoPrint 60; 3130, 3160, and 3935 Advanced Function Printer:
Attachment Configuration Handbook. The IPDS Handbook for Printers That Use
the Advanced Function Common Control Unit contains information about IPDS.
System Attachments
Appendix B, “Software and Hardware Requirements” on page 59 summarizes the
host environments that support the 3130 and the attachments than run under each.
26 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Important
Before the customer engineer can install the 3130, you must complete the
appropriate attachment configuration worksheets. For detailed worksheets,
instructions, and examples, refer to the IBM InfoPrint 60; 3130, 3160, and 3935
Advanced Function Printer: Attachment Configuration Handbook. If you do not
have a copy, ask your marketing representative to get you one. Installing these
attachments may require changes to your host system configuration.
Twinaxial Attachment
Twinaxial attachments directly attach the 3130 to an AS/400. A twinaxial cable
system supports cable-through capability, which allows more than one device to be
connected to a single cable. Refer to Application System/400 Printer Device
Programming, SC31-3713.
Ethernet TCP/IP and NetWare Attachment
The 3130 is connected to a host Ethernet using the ‘Integrated Ethernet LAN
adapter’ contained in the control unit.
The control unit can be attached directly to standard Thick (10Base5) Ethernet
coaxial cable (Feature Code 4163). The output connector is a thick 15-pin D-shell
“slide-latch” type that is compatible with IEEE 802.3 Section 7.6. Connection to
thick Ethernet media is through an Ethernet/IEEE 802.3 AUI cable available from
OEM vendors. Attachment to thin (10Base2) or twisted-pair (10BaseT) Ethernet
media is through external transceivers.
The coaxial T connector is used in addition to the 10Base2 transceiver to connect
to the thin Ethernet coaxial cable. You should use a customer-supplied RJ45
unshielded twisted-pair cable (must meet IEEE 802.3 requirements) to attach the
10BaseT transceiver to the Ethernet twisted-pair hub.
SDLC SNA Attachment
The 3130 can be attached to a host SDLC network by RS232 or V.35 cabling using
the Four-Port Multiprotocol Communication Controller Adapter contained in the
printer control unit. The Four-Port Multiprotocol Communication Controller Adapter
connects, through a 3-meter (10-foot) Four-Port Multiprotocol Interface cable to
either a 3-meter (10-foot) RS232 cable or to a 2-meter (7-foot) V.35 cable.
Notes:
1. SNA SDLC is intended to run on leased (non-switched) lines in point-to-point
mode for either EIA 232 (19.2 Kbps) or V.35 (56 Kb/second) for limited
distance modems or modem eliminators. You may also run V.35 (56 Kbps) on
leased line (DDS1 Digital Data Service) point-to-point with digital DSU/CSU
modems. Using speeds less than 19.2 Kbps, multipoint operation, or both can
slow printer performance and is not recommended. Clocking is provided by
setting limited distance modems or modem eliminators to an internal clock, or
by setting digital DSU/CSU modems to a network clock.
2. The 3130 can replace a 3820 printer, but for better performance, change the
MAXDATA or MAXFRAME and RU sizes in your VTAM, NCP, or system
configurations.
Chapter 5. Configuring the 3130 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Token-Ring (SNA, TCP/IP, and NetWare) Attachment
The 3130 can be attached to a host system using a 4 Mbps or 16 Mbps token-ring
local area network (LAN) with the IBM Token-Ring cabling and Token-Ring
High-Performance Adapter contained in the printer control unit.
The printer can be located a maximum of 100 meters (328 feet) from the 8228
Multistation Access Unit or 8230 Controlled Access Unit. The 8219 or 8220 Optical
Fiber Repeaters can be used to increase this distance.
PC Parallel Attachment
The 3130 is connected to a host through the Integrated PC Parallel Adapter in the
printer control unit. A standard PC parallel cable or a separately orderable network
print server (NPS) connects the printer to the host computer.
28 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6. Ordering and Storing Supplies
Chapter Overview
This chapter describes how to order and store the supplies that the 3130 uses.
Printer Supplies
Table 9 lists printer supplies, parts, the part numbers you can use to order them,
and an estimate of how often they need to be replaced. The yields listed in the
table are approximations. They are not a warranty or guarantee of minimum life,
and are provided only to assist in supplies planning. Analyze your actual usage
figures to determine how much of each supply item to stock.
Actual supply life varies according to printer usage, toner settings, paper
characteristics, temperature, and humidity. In addition, special applications (such
as, adhesive labels, extensive graphics, bar codes, landscape applications, and
pre-printed forms) may significantly reduce supply life.
When the 3130 runs low on a particular supply, it displays a message on the
operator panel.
Table 9. Printer Supplies and Parts
Supply Item
Part Number
Replace Every...
Cleaner unit
1372476
300 000 to 500 000 pages (job
stream dependent)
Developer mix
Fuser unit
1402691
600 000 pages
100V: 1372475
200V: 1372478
600 000 impressions
600 000 impressions
Photoconductor belt
1372472
1402690
50 000 to 100 000 counts
35 000 pages
Toner cartridge
(package of six
cartridges)
Transfer belt unit
1372477
600 000 pages
Ordering Supplies
To order supplies for the 3130 in the United States, use any of the following
methods:
Ÿ Contact a Lexmark International Incorporated authorized supply dealer.
Ÿ Call Lexmark Telemarketing at 1-800-438-2468 from 8 a.m. to 8 p.m. Eastern
Standard Time.
Ÿ Write Lexmark Telemarketing at:
Lexmark Telemarketing
1221 Alverser Drive
Midlothian, Virginia 23113
Copyright IBM Corp. 1994, 1996
Download from Www.Somanuals.com. All Manuals Search And Download.
29
Lexmark Telemarketing can help you locate dealers that sell 3130 supplies or take
your order. Supplies are warranted to be free of defects in materials and
workmanship. If you believe you are due a replacement, return the supply in its
original package or a package from the replacement supply to the point of
purchase. If purchased from a dealer, return it to that dealer. Include the following
with the return:
Ÿ A brief explanation of the problem
Ÿ The approximate number of prints run with the supply
Ÿ A copy of your invoice
Ÿ Print-quality samples
Ÿ An estimate of the amount of the defective supplies used.
In the United States, supplies purchased from Lexmark by telephone or catalog
should be mailed to:
Attention: Supplies Returns
Lexmark International, Inc. Building 988
1126 Russel Cave Rd
Lexington, Kentucky 40505
In other countries, contact your point of purchase for information about where to
return items.
Selecting Paper
Printing on paper that does not comply with paper specifications may result in
paper jams and print quality degradation. The 3130 uses standard white paper,
pastel-colored paper, prepunched paper, preprinted paper, cardstock, and adhesive
labels.
Xerographic paper is required to satisfy various electrical, heat, and mechanical
characteristics. Select only high quality papers and forms to avoid print quality and
printer paper handling problems. IBM recommends that you initially test several
reams of special use materials in your 3130 before you purchase large quantities
for a given application. For more detailed information regarding paper
characteristics and pretesting, refer to Advanced Function Printer Cut-Sheet Paper
Reference and the IBM 3130 Advanced Function Printer User's Guide. Table 10
on page 31 summarizes the paper sizes the 3130 can use and indicates the feed
orientation and the number of impressions per minute for each paper size.
30 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 10. Paper Sizes
Paper Size
Feed Orientation
Imp per Minute
Letter (8.5 x 11 in.)
Legal (8.5 x 14 in.)
Ledger (11 x 17 in.)
A4 (210 x 297 mm)
A3 (297 x 420 mm)
B5 (182 x 257 mm)
B4 (257 x 364 mm)
Commercial #10 envelope*
(4.5 x 9.5 in.) flap up
ISO International DL envelope*
(110 x 220 mm) flap down
Long-edge
Short-edge
Short-edge
Long-edge
Short-edge
Long-edge
Short-edge
Long-edge
30
15
15
30
15
30
15
30
Long-edge
30
Note:
* = Requires the Envelope Feeder feature
Paper Parameters
Table 11 summarizes recommendations that can help you and your paper supplier
choose paper that is most suitable for your 3130. This table contains parameters
that you should consider when purchasing paper supplies for your Page Printer.
Table 11 (Page 1 of 2). Paper Recommendations
Parameter
Recommendation
Paper Grade
Fiber Composition
No. 1 or No. 4 Xerographic
Preferred:
100% chemical wood pulp
Acceptable: Recycled or with cotton content
Color
Filler
White or Pastel Colors
Kaolin or china clay (aluminosilicate) or calcium
carbonate. To improve brightness, paper may contain
titanium dioxide or magnesium silicate.
Grain Direction
Cutting Method
Cutting Tolerances
Parallel to the long dimension (grain long)
Rotary Precision cut (Lennox, Will, or equivalent)
Length and Width:
Squareness:
±0.787 mm (±0.031 in.)
All corners 90° ±0° 6'
Basis Weight
Preferred:
75g/m2 (20 lb bond)
Acceptable: 64 to 160g/m2 (17 to 42 lb bond) and
110 lb index paper (200g/m2)
Caliper
20 to 24 lbs (75 to 90g/m2): 3.5 to 5.0 mils (90 to 127
micrometers) 17 to 19 lbs (64 to 72g/m2): 3.2 to 4.0
mils (81 to 102 micrometers)
Smoothness (Sheffield)
100 to 200 Sheffield units (75 to 90 g/m2 (20 to 24
lbs))
Porosity (Gurley)
Surface Sizing
Internal Sizing
10 sec/100 ml minimum
Starch–do not use synthetic surface sizing
Acid rosin or synthetic (alkylketene dimer or
alkyl-succinic anhydride)
Coefficient of Static Friction
0.35 to 0.62
Chapter 6. Ordering and Storing Supplies 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 11 (Page 2 of 2). Paper Recommendations
Parameter
Recommendation
Stiffness (Tabor Method)
Machine direction:
Cross direction:
1.7 minimum
0.8 minimum
Moisture Content
Surface Resistivity
3.4 to 5.5 percent
5x109 to 2x1012 ohms
Label Parameters
The 3130 can also print on paper face self-sticking adhesive-backed labels in
simplex mode. Because the use of labels may cause more problems than printing
on plain xerographic paper, IBM recommends that you and your label supplier
consider the following parameters when purchasing labels:
Table 12. Label Recommendations
Parameter
Recommendation
Total Basis Weight
Caliper
64-160 g/m2
175 microns (6.8 mils) maximum
70 to 200 Sheffield units
Face Stock Smoothness
For more detailed information about paper, cardstock, labels, and other forms, refer
to the Advanced Function Printer Cut-Sheet Paper Reference.
Attention: When printing labels, observe the following:
Ÿ Use only the base stacker or upper stacker. Using the side stacker for labels
may damage the printer.
Ÿ Load labels face down in the upper sub tray, lower sub tray, or main tray.
Ÿ Run labels only in simplex mode.
Ÿ Before ordering large quantities of your labels, run several small jobs to be sure
they work properly.
Ÿ Refer to IBM 3130 Advanced Function Printer User's Guide for more details
about running labels.
Prepunched Paper
Prepunched paper should be flat and without deformation. Discard paper with
ragged or damaged hole edges. Do not allow chad (the little paper bits that result
from punching) or paper dust to adhere to the paper.
Supplies with prepunched holes must conform to the following specifications:
Ÿ Maximum of four holes
Ÿ Maximum hole diameter of 10 mm (0.39 in.)
Ÿ Holes may not be located in, or protrude into the area marked by the diagonal
lines in the following figures; otherwise, the paper sensor detects the holes and
may give false paper jam errors.
32 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
4
4
m
m
n
3
5
m
m
n
(
1
.
7
3
i
.
)
(
1
.
3
8
i
.
)
5
.
m
0
m
i
(
0
2
n
.
)
P
a
p
e
i
r
F
e
e
d
D
i
r
e
c
t
i
o
n
c
(
F
e
e
d
O
r
e
n
t
a
t
i
o
n
:
L
a
n
d
s
a
p
e
)
5
.
m
0
m
i
(
0
2
n
.
)
2
2
m
m
n
1
0
m
m
(
0
.
8
7
i
.
)
(
0
.
3
9
i
n
.
)
1
5
2
.
8
m
m
n
(
0
4
i
.
)
1
6
m
m
(
0
.
6
3
i
n
.
)
Figure 2. Prepunched Paper Clearances -- A4, B5, and Letter Size
4
4
m
m
n
3
5
m
m
n
(
1
.
7
3
i
.
)
(
1
.
3
8
i
.
)
5
.
m
0
m
i
(
0
2
n
.
)
P
a
p
e
r
F
e
e
d
D
o
i
r
e
:
c
t
i
o
r
n
(
F
e
e
d
O
r
i
e
n
t
a
t
i
n
P
o
t
r
a
i
t
)
5
.
m
0
m
i
(
0
2
n
.
)
2
2
m
m
n
1
0
m
m
(
0
.
8
7
i
.
)
(
0
.
3
9
i
n
.
)
1
5
2
.
8
m
m
n
(
0
4
i
.
)
1
6
m
m
(
0
.
6
3
i
n
.
)
Figure 3. Prepunched Paper Clearances -- A3, B4, Legal, and Ledger Size
Paper Cassettes
Various paper cassettes are available and can be ordered in the sizes described in
Table 1 on page 4.
Chapter 6. Ordering and Storing Supplies 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Preprinted Paper
Preprinted paper has ink applied before the printer prints on it. Be sure that ink
used in preprinting is non-volatile and contains drying or resin oils. Ink must not
transfer when fusing temperatures are 200°C (392°F) and pressures are 450kPA
(65 lbs/in2) for several seconds. IBM recommends the following inks:
Ÿ Cured by ultraviolet
Ÿ Cured by heat (Tinplate ink)
Ÿ Dried by oxidative polymerization
The shaded area in Figure 4 should not contain printing. Printing in this area can
cause false double-sheet feeds.
Figure 4. Preprinted Sheet
Envelopes
For optimum printing results, use either new 90 g/mò (24 lb) sulfite (100%)
chemical wood pulp) or 25% cotton bond envelopes. Before ordering large
quantities of your envelopes, run several small jobs to make sure that they work
properly. This includes envelopes with rough or highly textured surfaces, such as
laid finishes.
The laser-printing process heats envelopes to a temperature of 175°C (350°F).
Use only envelopes that are able to withstand these temperatures without sealing,
excessive curling, wrinkling, or releasing hazardous emissions. Check with the
supplier of the envelopes you plan to use to determine if they are usable with laser
printers.
For optimum performance and to prevent paper jams, do not use envelopes that
34 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Ÿ Have excessive curl or twist
Ÿ Are stuck together
Ÿ Are damaged in any way
Ÿ Contain windows, holes, perforations, cutouts, or deep embossing
Ÿ Have exposed flap adhesive when the flap is placed in the sealed or closed
position
Ÿ Have interlocking design
Ÿ Have postage stamps attached
Table 13 summarizes recommendations that can help you and your envelope
supplier choose envelopes that are the most suitable for your 3130.
Table 13. Envelope Recommendations
Parameter
Recommendation
Fiber Composition
Preferred:
100% chemical wood pulp
Acceptable: 25% cotton bond
Total Basis Weight
75 to 90 g/mò (20 to 24 lb)
The 3130 supports the following standard envelope sizes:
Commercial: #10: 114 x 241 mm (4.5 x 9.5 in)
ISO international DL: 110 x 220 mm (4.3 x 8.7 in)
Table 14 and Figure 5 on page 36 show other allowable dimensions.
Table 14. Envelope Dimensions
Dimensions
Maximum Minimum
254 mm (10 in)
140 mm (5.5 in)
-
A
B
C
D
E
F
162 mm (6.4 in)
95 mm (3.7)
41 mm (1.6 in) See note.
137 mm (5.4 in)
110 mm (4.3 in)
-
200 mm (7.9 in)
-
70 mm (2.8)
Note: The C dimension must be 41 mm or greater and the angle (0) must be greater
than zero.
Chapter 6. Ordering and Storing Supplies 35
Download from Www.Somanuals.com. All Manuals Search And Download.
E
D
F
O
B
C
A
Figure 5. Envelope Dimensions
Selecting, Testing, and Ordering Paper Forms
To get the maximum print quality and reliability from your 3130, IBM recommends
that you rely on the Advanced Function Printer Cut-Sheet Paper Reference, your
paper forms supplier, and your marketing representative to help you choose the
best forms and special-purpose materials for your applications.
Storing Paper and Supplies
Store paper and supplies that you intend to use soon near the printer, both for
convenience and to condition the paper.
Otherwise, store paper and supplies
Ÿ In their original wrappers, away from heat or dampness
Ÿ On a flat surface, such as a shelf, but not on the floor
Ÿ In a closable cabinet for protection and monitoring.
Store forms and special-purpose materials in an area where the temperature and
humidity are similar to the environment where you will use them. Avoid areas with
extreme heat or humidity. Extended exposure to extremes can permanently
damage the materials. Storing forms in an area where relative humidity is above
65% may result in reduced print quality.
To condition IBM 3130 supplies, store them in the same environment as the printer
for at least 24 hours before you use them. At other times, supplies may be stored
in an environment that does not exceed the following requirements:
Temperature
−10° to 40°C (14° to 104°F)
Relative Humidity
5% to 80%
For additional information on storing and conditioning supplies, refer to Advanced
Function Printer Cut-Sheet Paper Reference.
36 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A. 3130 Font Set
Chapter Overview
This appendix describes 3130 single byte character set (SBCS) and double byte
character set (DBCS) font support, including:.
Ÿ The contents of the IBM Strategic Font Set (IPDS):
– “IBM Core Interchange Resident Scalable Font Set (IPDS-Only)”
– “4028 Compatibility Resident Font Set (IPDS-Only)” on page 42
– “IBM Coordinated Font Set (IPDS-Only)” on page 44
– “DBCS Resident Raster Font Set (IPDS-Only)” on page 45
– “DBCS Resident Scalable (Outline) Fonts (IPDS-Only)” on page 47
Ÿ “PostScript Resident Font Set” on page 52
Ÿ “PCL5e Resident Font Set” on page 55
Ÿ A description of the 3130 default font, as well as other fonts you can select
as the default font. See “Default Font (IPDS-Only)” on page 49.
Ÿ 3130 support of the AS/400 “bolding” function. See “AS/400 Bolding
Function, Native and OfficeVision (IPDS-Only)” on page 50.
IBM Core Interchange Resident Scalable Font Set (IPDS-Only)
Table 15 lists the type faces in the IBM Core Interchange Resident Scalable Font
Set, the 3130 resident typefaces, as well as the valid Font Global ID (FGID) and
Graphic Character Set Global ID (GCSGID) for each typeface. Table 16 on
page 39 lists the valid GCSGID subsets for each GCSGID listed in Table 15.
Table 17 on page 39 lists the Code Pages that correspond to each typeface.
Table 15 (Page 1 of 3). IBM Core Interchange Resident Scalable Font Set
Typeface
FGID
GCSGID
Latin 1/2/3/4/5
Times New Roman Medium
Times New Roman Bold
Times New Roman Italic Medium
Times New Roman Italic Bold
Helvetica Roman Medium
Helvetica Roman Bold
2308
2309
2310
2311
2304
2305
2306
2307
416
1269
1269
1269
1269
1269
1269
1269
1269
1269
1269
1269
Helvetica Italic Medium
Helvetica Italic Bold
Courier Roman Medium
Courier Roman Bold
420
Courier Italic Medium
424
Copyright IBM Corp. 1994, 1996
Download from Www.Somanuals.com. All Manuals Search And Download.
37
Table 15 (Page 2 of 3). IBM Core Interchange Resident Scalable Font Set
Typeface
FGID
GCSGID
Courier Italic Bold
428
1269
Symbols
Times New Roman Medium
Times New Roman Bold
Helvetica Roman Medium
Helvetica Roman Bold
Courier Roman Medium
Courier Roman Bold
2308
2309
2304
2305
416
1275
1275
1275
1275
1275
1275
420
Cyrillic Greek
Times New Roman Medium
Times New Roman Bold
Times New Roman Italic Medium
Times New Roman Italic Bold
Helvetica Roman Medium
Helvetica Roman Bold
Helvetica Italic Medium
Helvetica Italic Bold
2308
2309
2310
2311
2304
2305
2306
2307
416
1300
1300
1300
1300
1300
1300
1300
1300
1300
1300
1300
1300
Courier Roman Medium
Courier Roman Bold
420
Courier Italic Medium
424
Courier Italic Bold
428
Arabic
ITC Boutros Setting Medium
ITC Boutros Setting Bold
2308
2309
2310
2311
2304
2305
2306
2307
416
1264
1264
1264
1264
1264
1264
1264
1264
1264
1264
1264
1264
ITC Boutros Setting Italic Medium
ITC Boutros Setting Italic Bold
ITC Boutros Modern Rokaa Medium
ITC Boutros Modern Rokaa Bold
ITC Boutros Modern Rokaa Italic Medium
ITC Boutros Modern Rokaa Italic Bold
Boutros Typing Medium
Boutros Typing Bold
420
Boutros Typing Italic Medium
Boutros Typing Italic Bold
424
428
Hebrew
Narkissim Medium
Narkissim Bold
2308
2309
2310
1265
1265
1265
Narkissim Italic Medium
38 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 15 (Page 3 of 3). IBM Core Interchange Resident Scalable Font Set
Typeface
FGID
2311
2304
2305
2306
2307
416
GCSGID
1265
1265
1265
1265
1265
1265
1265
1265
1265
Narkissim Italic Bold
Narkiss Tam Medium
Narkiss Tam Bold
Narkiss Tam Italic Medium
Narkiss Tam Italic Bold
Shalom Medium
Shalom Bold
420
Shalom Italic Medium
Shalom Italic Bold
424
428
GCSGID Subsets for IBM Core Interchange Fonts
Table 16 lists the valid GCSGID subsets for each GCSGID listed in Table 15 on
page 37.
Table 16. GCSGID Subsets for IBM Core Interchange Fonts
GCSGID
Valid GCSGID Subsets
1269
0101, 0103, 0119, 0251, 0265, 0269, 0273, 0277, 0281, 0285, 0288,
0289, 0293, 0297, 0301, 0305, 0309, 0313, 0317, 0321, 0325, 0329,
0337, 0341, 0611, 0697, 0919, 0959, 0965, 0980, 0982, 0983, 0987,
0990, 0991, 0993, 0995, 1111, 1132, 1133, 1145, 1146, 1149, 1152,
1166, 1167, 1174, 1188, 1189, 1198, 1220, 1232, 1233, 1237, 1256,
1258, 1259, 1260, 1261, 1268, 1286, 1301, 1302, 2039
1275
1264
1265
1300
0340, 0630, 0909, 1191, 1257
0235, 0994, 1154, 1162, 1177, 1244
0941, 0687, 0986, 0992, 1147, 1199, 1217, 1218
0218, 0925, 0960, 0981, 0985, 0996, 0998, 1150, 1190, 1231, 1235,
1249, 1251, 1276, 1401
IBM Core Interchange Resident Code Page Set
Table 17 lists the code pages used with the IBM Core Interchange Resident Fonts.
Table 17 (Page 1 of 4). IBM Core Interchange Resident Code Page Set
CPGID
GCSGID
Latin 1 Country Extended Code Pages
US English, Canadian English, Canadian French,
Language Supported
037
697
Dutch, Brazilian Portuguese, Portuguese
273
274
275
277
278
697
697
697
697
697
German
Belgian
Brazilian
Danish, Norwegian
Finnish, Swedish
Appendix A. 3130 Font Set 39
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 17 (Page 2 of 4). IBM Core Interchange Resident Code Page Set
CPGID
280
GCSGID
697
Language Supported
Italian
281
697
Japanese
282
697
Portuguese
284
697
Castillian Spanish, Latin American Spanish
UK English
285
697
297
697
French, Catalan
500
697
Multinational, Belgium French, Belgium Dutch,
Swiss French, Swiss German, Swiss Italian
871
361
697
Icelandic
Latin 1 EBCDIC Publishing Code Pages
1145
Multinational, Belgium French, Belgium Dutch,
Swiss French, Swiss German, Swiss Italian
382
383
384
385
386
387
388
389
390
391
392
393
394
395
1145
1145
1145
1145
1145
1145
1145
1145
1145
1145
1145
1145
1145
1145
German
Belgian
Brazilian Portuguese
Canadian French
Danish, Norwegian
Finnish, Swedish
French, Catalan
Italian
Japanese
Portuguese
Castillian Spanish
Latin American Spanish
UK English
US English, Canadian English
Latin 1 ASCII Code Pages
437
919
Multinational, US English, UK English, Dutch,
German, Finnish, French, Italian, Spanish, Swedish
850
860
861
863
865
1004
819
980
990
991
993
995
1146
697
Multinational PC
Portuguese (Primary = 850)
Icelandic (Primary = 850)
Canadian French (Primary = 850)
Nordic (Primary = 850)
IBM PC Desktop Publishing
ISO Latin 1
Latin 2/3/4/5 EBCDIC and ASCII Code Pages
982 Croatian, Czech, East German, Hungarian, Polish,
Romanian, Slovak, Slovenian
852
40 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 17 (Page 3 of 4). IBM Core Interchange Resident Code Page Set
CPGID
870
GCSGID
959
Language Supported
Latin 2 Multilingual
912
959
Latin 2 ISO/ ANSI 8 Bit
Latin 3 Multilingual PC
Latin 3 Multilingual
853
983
905
1286
1256
1256
987
1069
914
Latin 4 ISO/ASCII
Latin 4 EBCDIC
857
Latin 5 PC
920
1152
1152
Latin 5 ISO/ANSI 8 Bit
Latin 5
1026
Latin EBCDIC DCF Code Pages
DCF Release 2 Compatibility
US Text Subset
1002
1003
1068
1039
1132
1133
1259
1258
Text with Numeric Spacing
GML List Symbols
Cyrillic and Greek EBCDIC and ASCII Code Pages
880
915
855
866
1025
423
813
851
869
875
1039
960
1150
985
996
1150
218
925
981
998
925
1258
Cyrillic Multilingual (Primary = 1025)
Cyrillic ISO/ASCII 8 Bit
Cyrillic PC
Cyrillic #2 PC
Cyrillic Multilingual
Greek 183 (Primary = 875)
Greek ISO/ASCII 8 Bit
Greek PC (Primary = 869)
Greek PC
Greek
GML List Symbols
Arabic EBCDIC and ASCII Code Pages
Arabic Bilingual
420
235
864
994
Arabic PC
1008
1029
1046
1039
1162
1154
1177
1258
Arabic ISO/ASCII 8 Bit
Arabic Extended ISO/ASCII 8 Bit
Arabic Extended ISO/ASCII 8 Bit
GML List Symbols
Hebrew EBCDIC and ASCII Code Pages
Hebrew ISO/ASCII 8 Bit
Hebrew Publishing
916
1028
424
803
941
1199
941
Hebrew
1147
Hebrew Character Set A (Primary = 424)
Appendix A. 3130 Font Set 41
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 17 (Page 4 of 4). IBM Core Interchange Resident Code Page Set
CPGID
856
GCSGID
986
Language Supported
Hebrew PC (Primary = 862)
Hebrew PC
862
992
1039
1258
GML List Symbols
Symbols
259
340
Symbols, Set 7
899
340
Symbols, Set 7 ASCII
Symbols, Adobe
1087
1038
1091
1092
363
1257
1257
1191
1191
630
Symbols, Adobe ASCII
Symbols, Modified Set 7
Symbols, Modified Set 7 ASCII
Symbols, Set 8
829
909
Math Symbols
4028 Compatibility Resident Font Set (IPDS-Only)
Table 18 describes the 4028 Compatibility Resident Font Set.
Notes:
1. The 3130 substitutes Times New Roman (from the IBM Core Interchange Set)
for the Times Roman fonts listed in Table 18.
2. Table 20 on page 44 describes the code pages that correspond to the Code
Page column in Table 18.
3. Prestige fonts with a Code Page ID (CPGID) of 259 are mapped to the Courier
Roman Medium Symbols font.
4. The Prestige Proportional Spaced font (FGID 164) is not supported as a
resident font.
Table 18 (Page 1 of 2). 4028 Compatibility Resident Font Set
Alt
FGID
Point
Size
Font
width
Code
Pages
Typeface
APL
FGID
76
Pitch
12
10
12
12
120
120
144
310
Boldface
Courier
159
11
20224
Proportional
10
A, B
259, A,
B
Courier
85
12
10
120
259, A,
B
Courier
223
254
46
15
9
96
A, B
A, B
A, B
A, B
A, B
Courier
17.1
10
8.5
12
12
10
84
Courier Bold
Courier Italic
Courier Italic
144
144
120
18
10
92
12
42 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 18 (Page 2 of 2). 4028 Compatibility Resident Font Set
Alt
FGID
Point
Size
Font
width
Code
Pages
Typeface
Letter Gothic
OCR A
FGID
281
19
Pitch
20
7.5
12
12
10
72
A, B
892
893
10
144
144
120
OCR B
03
10
Prestige
86
12
259, A,
B
Prestige
221
256
12
15
9
96
A, B
A, B
Prestige
17.1
10
8.5
12
84
Prestige Pica
144
259, A,
B
Prestige Elite Bold
Prestige Elite Italic
Times Roman
111
12
10
10
6
120
120
40
A, B
A, B
A
112
12
5687
5687
5687
5687
5707
5707
5707
5707
5707
5815
5815
5835
5835
760
Typo
Typo
Typo
Typo
Typo
Typo
Typo
Typo
Typo
Typo
Typo
Typo
Typo
Times Roman
751
8
53
A
Times Roman
1051
1351
1053
761
10
12
10
12
14
18
24
10
12
10
12
67
A
Times Roman
80
A
Times Roman Bold
Times Roman Bold
Times Roman Bold
Times Roman Bold
Times Roman Bold
Times Roman Italic
Times Roman Italic
Times Roman Bold Italic
Times Roman Bold Italic
67
A
80
A
762
93
A
1803
2103
1056
763
120
160
67
A
A
A
80
A
764
67
A
765
80
A
Other Resident Fonts (IPDS-Only)
Table 19 shows a font included for other compatibility reasons. Table 20 on
page 44 describes the code pages that correspond to the Code Page column in
Table 19.
Table 19. Other Resident Fonts
Typeface
FGID
Alt
FGID
Pitch
Point
Size
Font
Width
Code
Pages
Courier.17.
252
17.1
11
84
A,B
Appendix A. 3130 Font Set 43
Download from Www.Somanuals.com. All Manuals Search And Download.
Compatibility Resident Code Page Set
Table 20 provides an explanation of the groups as used in the Code Pages column
of Table 18 on page 42.
Table 20. Compatibility Resident Code Page Set
CPGID
GCSGID
Group A
037, 273, 274, 277, 278, 280, 281, 284, 285, 297, 500,
871
697
038, 367
103
341
277
317
321
325
1132
260
276
286
287
288
1002
Group B
256 (Replaced by 500)
337
329
289 (Replaced by 500, but missing obsolete “Peseta”
character)
Miscellaneous
310
259
892
893
963
340
968
969
IBM Coordinated Font Set (IPDS-Only)
Table 21 on page 45 lists the IBM Coordinated font set typefaces resident in 3130.
All of the listed fonts are scalable.
Where the IBM Core Interchange code pages are referenced in Table 17 on
page 39, only the Latin 1 Country Extended, Latin 1 EBCDIC Publishing, Latin 1
ASCII and Latin EBCDIC DCF code pages are supported.
44 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 21. IBM Coordinated Font Set
Typeface
FGID
307
322
20224
304
400
404
305
306
432
318
319
304
GCSGID
1304
1304
2039
2039
2039
2039
968
Code Pages
APL
293, 310, 910
APL Bold
293, 310, 910
Boldface
See Table 17 on page 39
See Table 17 on page 39
See Table 17 on page 39
See Table 17 on page 39
876, 892
Gothic Text
Letter Gothic
Letter Gothic Bold
OCR A
OCR B
969
877, 893
Prestige
2039
2039
2039
1306
See Table 17 on page 39
See Table 17 on page 39
See Table 17 on page 39
290, 897, 1027, 1041
Prestige Bold
Prestige Italic
Katakana Gothic
GCSGID Subsets
Table 22 maps the valid subsets of the GCSGIDs listed for the Pennant Strategic
Font Set 2.
Table 22. GCSGID Subsets
GCSGID
1304
Valid GCSGID Subsets
0380, 0963, 1113
2039
0101, 0103, 0119, 0251, 0265, 0269, 0273, 0277, 0281, 0285, 0288, 0289, 0293, 0297,
0301, 0305, 0309, 0313, 0317, 0321, 0325, 0329, 0337, 0341, 0611, 0697, 0919, 0980,
0990, 0991, 0993, 0995, 1132, 1133, 1145, 1146, 1149, 1198, 1220, 1258, 1259, 1260
1306
0332, 1164, 1172, 1187
DBCS Resident Raster Font Set (IPDS-Only)
The following tables list the DBCS resident fonts that are available as a part of
separately-orderable feature for the 3130. These fonts provide 240-pel capability
for Japanese (Katakana), Korean, Simplified Chinese, Traditional Chinese, and Thai
languages.
Notes:
1. These fonts are only available in raster form at 240 pel.
2. The 5 Japanese/Kanji DBCS fonts supported by 3820 ROM Font RPQ
#8A5014 are included in the Japanese font set.
3. Your printer man or may not have all of these fonts, depending on the date of
the code in your printer. Refer to IBM 3130 Advanced Function Printer System
Administration Guide for how to determine the fonts your printer has.
Appendix A. 3130 Font Set 45
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 23. Japanese Font Set
Box
Size
Point
Size
Typeface
Font Width
96
GCSGID
370
370
370
370
370
370
370
370
370
370
370
370
370
370
370
370
370
370
370
370
370
370
370
CPGID
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
FGID
Mincho (M16F)
Mincho (M24F)
Mincho (Z24F)
Mincho (M26F)
Mincho (M32F)
Mincho (M36F)
Mincho (M40F)
Mincho (M44F)
Mincho (M48F)
Mincho (M52F)
Mincho (M64F)
Gothic (G16F)
Gothic (G20F)
Gothic (G24F)
Gothic (G32F)
Gothic (G36F)
Gothic (G40F)
Gothic (G48F)
Gothic (G64F)
R-Gothic (R36F)
R-Gothic (R40F)
R-Gothic (R48F)
R-Gothic (R64F)
16x16
24x24
24x24
26x26
32x32
36x36
40x40
44x44
48x48
52x52
64x64
16x16
20x24
24x30
32x32
36x36
40x40
48x48
64x64
36x36
40x40
48x48
64x64
4.8
7
53559
53559
53559
53559
53559
53559
53559
53559
53559
53559
53559
53815
53813
53813
53815
53815
53815
53815
53815
54071
54071
54071
54071
140
144
156
180
216
240
264
288
312
384
100
120
140
192
216
240
288
384
216
240
288
384
7.2
7.8
10
10.8
12
13.2
14.4
15.6
19.2
5
7.2
7
9.6
10.8
12
14.4
19.2
10.8
12
14.4
19.2
Table 24. Korean Font Set
Box
Size
Point
Size
Typeface
Font Width
144
GCSGID
934
CPGID
834
834
834
834
834
834
834
834
FGID
Mincho (M24K)
Mincho (M32K)
Mincho (M36K)
Mincho (M40K)
Mincho (M48K)
Mincho (M64K)
Gothic (G16K)
Gothic (G24K)
24x24
32x32
36x36
40x40
48x48
64x64
16x16
24x30
7.2
9.6
10.8
12
53559
53559
53559
53559
53559
53559
53815
53813
192
934
216
934
240
934
14.4
19.2
4.8
9
288
934
384
934
96
934
144
934
46 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 25. Traditional Chinese Font Set
Box
Size
Point
Size
Typeface
Font Width
GCSGID
935
CPGID
835
FGID
Ming
Ming
Ming
(M24T)
24x24
32x32
40x40
16x16
7.2
9.6
12
144
192
240
96
54583
54583
54583
53815
(M32T)
(M40T)
935
835
935
835
Gothic (G16T)
4.8
935
835
Table 26. Simplified Chinese Font Set
Box
Size
Point
Size
Typeface
Font Width
GCSGID
937
CPGID
837
FGID
Song
Song
Song
(S26P)
26x26
32x32
40x40
16x16
7.8
9.6
12
156
192
240
96
54327
54327
54327
53815
(S32P)
(S40P)
937
837
937
837
Gothic (G16P)
4.8
937
837
Table 27. Thai Font Set
Box
Size
Point
Size
Typeface
Font Width
144
GCSGID
939
CPGID
839
FGID
Official (O40F)
Official (O60F)
Italics (I60F)
24x40
24x60
24x60
12
18
18
57655
57655
58039
144
939
839
144
939
839
DBCS Resident Scalable (Outline) Fonts (IPDS-Only)
The following tables list the Scalable DBCS resident fonts that are available as part
of a separately orderable feature for the 3130. Table 30 on page 49 provides a
mapping of the valid subsets of the GCSGIDs listed for the DBCS Resident
Scalable Font Set.
Table 28 (Page 1 of 2). DBCS Resident Scalable Font Set
Character Set
GCSGID
Typeface
FGID
Code Page
Japenese
Heisei Mincho
53248
53249
300
1067
1067
Heisei Kaku Gothic
300
Traditional Chinese
Sung
Kai
54563
54568
835
2070
2070
835
Simplified Chinese
837
Fang Song
54566
1082
Appendix A. 3130 Font Set 47
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 28 (Page 2 of 2). DBCS Resident Scalable Font Set
Character Set
GCSGID
Typeface
Hei
FGID
Code Page
837
54565
54568
54567
1082
1082
1082
Kai
837
Song
837
Korean
Myengjo
Gothic
53560
53816
834
834
1091
1091
DBCS Resident Scalable Code Page Set
The following tables list the code pages used with the DBCS Resident Scalable
Fonts. UDC means User-Defined Characters.
Table 29. DBCS Resident Scalable Code Page Set
GCSGID
CPGID
Language and Width Supported
Japanese Code Pages
1000
1001
300
300
Japanese Full Width
Japanese Full Width with User Defined Character
(UDC) support.
1172
1132
1172
1187
290
Japanese Half Width
Japanese Half Width
1002
1027
11041
Japanese Half Width
Japanese Half Width
Traditional Chinese Code Pages
Chinese Full Width with UDC support
Chinese Full Width
0935
1030
1175
1189
1238
835
835
37
Chinese Half Width
1043
1114
Chinese Half Width
Chinese Half Width
Simplified Chinese Code Pages
Chinese Full Width with UDC support
Chinese Full Width
0937
1020
1174
1240
837
837
836
1115
Chinese Half Width
Chinese Half Width
Korean Code Pages
0934
1010
1173
1327
834
834
833
1088
Korean Full Width with UDC support
Korean Full Width
Korean Half Width
Korean Half Width
48 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
GCSGID Subsets for the DBCS Resident Scalable Font Set
Table 30 lists the valid GCSGID subsets for each GCSGID listed in Table 28 on
page 47 and the valid subsets (denoted by an asterisk '*') for GCSGIDs intended
for user-defined font sets.
Table 30. GCSGID Subsets for the DBCS Resident Scalable Font Set
GCSGID
1067
Valid GCSGID Subsets
1000, 1132, 1172, 1187
1001, 1067
1068*
1082
1020, 1174, 1240
937, 1082
1083*
1091
1010, 1173, 1327
934, 1091
1092*
2070
1030, 1175, 1189, 1238
935, 2070
2071*
Default Font (IPDS-Only)
The default font for the 3130 is Courier Roman Medium 12 pitch (10 point) using
code page 500, version 1.
The printer operator can change the default font and code page by selecting from
the code pages listed below.
Table 31 (Page 1 of 2). Selectable Default Fonts
Code
Page
Description
Typefaces/Sized (CPI)
500
037
038
260
273
274
277
278
280
281
284
285
286
287
288
Belgian, Swiss / International
US, Canadian, Dutch, Portuguese
US English ASCII
Canadian French
See Note
See Note
See Note
See Note
See Note
See Note
See Note
See Note
See Note
See Note
See Note
See Note
See Note
See Note
See Note
Austrian / German
Belgian
Danish / Norwegian
Finnish / Swedish
Italian
Japanese
Spanish
UK English
Austrian / German (alternate)
Danish / Norwegian (Alternate)
Finnish / Swedish (Alternate)
Appendix A. 3130 Font Set 49
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 31 (Page 2 of 2). Selectable Default Fonts
Code
Page
Description
Typefaces/Sized (CPI)
290
297
420
Japanese / Katakana
French
Katakana Gothic Medium/10 and 12
See Note
Arabic
Boutros Typing Medium/10 and 12
Boutros Typing Bold/10 and 12
Boutros Typing Italic Medium/10 and 12
Boutros Typing Italic Bold/10 and 12
423
424
Greek
See Note
Hebrew
Shalom Medium/10 and 12
Shalom Bold/10 and 12
Shalom Italic Medium/10 and 12
Shalom Italic Bold/10 and 12
870
871
880
892
893
905
1026
875
Note:
Latin 2 Multilingual
Icelandic
Cyrillic
See Note
See Note
See Note
Medium/10
Medium/10
See Note
See Note
See Note
OCR - A
OCR - B
Turkish
Turkish
Greek
Courier Medium/10 and 12
Courier Bold/10 and 12
Courier Italic/10 and 12
Courier Italic Bold/10 and 12
AS/400 Bolding Function, Native and OfficeVision (IPDS-Only)
The following tables show the typeface substitutions that occur on the 3130 printer
when an application running in native OS/400 or OfficeVision uses the “bolding”
function. The tables list the original typeface, the typeface that the 3130
substitutes, and the FGIDs of both.
Notes:
1. This support is available for resident fonts only.
2. The bold font may have different metrics than the original font; this can affect
line endings.
Table 32 (Page 1 of 2). IBM Core Interchange Resident Scalable Font Set
Requested Font
FGID
Result
FGID
Latin 1/2/3/4/5
Times New Roman Medium
2308
Times New Roman Bold
2309
50 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 32 (Page 2 of 2). IBM Core Interchange Resident Scalable Font Set
Requested Font
FGID
2310
2304
2306
416
Result
FGID
2311
2305
2307
420
Times New Roman Italic Medium
Helvetica Roman Medium
Helvetica Italic Medium
Courier Roman Medium
Courier Italic Medium
Times New Roman Italic Bold
Helvetica Roman Bold
Helvetica Italic Bold
Courier Roman Bold
Courier Italic Bold
424
428
Symbols
Times New Roman Medium
Helvetica Roman Medium
Courier Roman Medium
2308
2304
416
Times New Roman Bold
Helvetica Roman Bold
Courier Roman Bold
2309
2305
420
Cyrillic Greek
Times New Roman Medium
Times New Roman Italic Medium
Helvetica Roman Medium
Helvetica Italic Medium
2308
2310
2304
2306
416
Times New Roman Bold
Times New Roman Italic Bold
Helvetica Roman Bold
Helvetica Italic Bold
2309
2311
2305
2307
420
Courier Roman Medium
Courier Italic Medium
Courier Roman Bold
Courier Italic Bold
424
428
Arabic
ITC Boutros Setting Medium
2308
2310
2304
ITC Boutros Setting Bold
2309
2311
2305
ITC Boutros Setting Italic Medium
ITC Boutros Setting Italic Bold
ITC Boutros Modern Rokaa Bold
ITC Boutros Modern Rokaa
Medium
Boutros Typing Medium
416
424
Boutros Typing Bold
420
428
Boutros Typing Italic Medium
Boutros Typing Italic Bold
Hebrew
Narkissim Medium
2308
2310
2304
2306
416
Narkissim Bold
2309
2311
2305
2307
420
Narkissim Italic Medium
Narkiss Tam Medium
Narkiss Tam Italic Medium
Shalom Medium
Narkissim Italic Bold
Narkiss Tam Bold
Narkiss Tam Italic Bold
Shalom Bold
Shalom Italic Medium
424
Shalom Italic Bold
428
Table 33 (Page 1 of 2). 4028 Compatibility Resident Font Set
Requested Font
Courier
FGID
11
Result
FGID
420
420
420
420
428
Courier Roman Bold
Courier Roman Bold
Courier Roman Bold
Courier Roman Bold
Courier Italic Bold
Courier
85
Courier
223
254
18
Courier
Courier Italic
Appendix A. 3130 Font Set 51
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 33 (Page 2 of 2). 4028 Compatibility Resident Font Set
Requested Font
Courier Italic
Letter Gothic
Prestige
FGID
92
Result
FGID
428
Courier Italic Bold
Letter Gothic Bold
Prestige Bold
281
404
86
318
Prestige
221
Prestige Bold
318
Prestige
256
Prestige Bold
318
Prestige Pica
Times Roman
Times Roman
Times Roman
Times Roman
Times Roman Italic
Times Roman Italic
12
Prestige Bold
318
5687
Times New Roman Bold
Times New Roman Bold
Times New Roman Bold
Times New Roman Bold
Times New Roman Italic Bold
Times New Roman Italic Bold
2309
2309
2309
2309
2311
2311
5687/751
5687/1051
5687/1351
5815/1056
5815
Table 34. IBM Coordinated Font Set
Requested Font
APL
FGID
307
Result
FGID
322
APL Bold
Letter Gothic
Prestige
400
Letter Gothic Bold
Prestige Bold
404
432
318
PostScript Resident Font Set
This font set is available in SBCS outline 300 pel only.
The 3130 has three sets of resident PostScript fonts. These three sets are:
Ÿ Fifty-six Type 1 fonts. A few of these fonts have names that are identical to
names of fonts in the set of Adobe standard fonts.
Ÿ Thirteen duplicate Type 1 fonts with different names. These fonts are
duplicates of fonts from the first set, with their names changed for IBM
compatibility purposes.
Ÿ Ten Type 42 Fonts. These are TruType fonts converted to Type 42 format for
use by PostScript. Some of them have significantly fewer characters than
PostScript fonts normally have. None of them provide all of the characters for
the PostScript Standard encoding or ISO Latin 1 encoding.
Adobe Type 1 Fonts
Font Name used in PostScript Programs
AvantGarde-Demi
Full Name of Font
ITC Avant Garde Gothic Demi
ITC Avant Garde Gothic Demi Oblique
Avant Garde-DemiOblique
52 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Font Name used in PostScript Programs
AvantGarde-Book
AvantGarde-BookOblique
CourierAPL2
Full Name of Font
ITC Avant Garde Gothic Book
ITC Avant Garde Gothic Book Oblique
Courier APL2
CourierAPL2-Bold
Boldface-Bold
Courier APL2 Bold
Boldface Bold
Bookman-Demi
ITC Bookman Demi
ITC Bookman Demi Italic
ITC Bookman Light
ITC Bookman Light Italic
Century Schoolbook Bold
Century Schoolbook Bold Italic
Century Schoolbook Italic
Courier
Bookman-Demitalic
Bookman-Light
Bookman-Lightitalic
CenturySchlbk-Bold
CenturySchlbk-BoldItalic
CenturySchlbk-Italic
Courier
CourierSymbols
Courier Symbols
CourierSymbols-Bold
Courier-Bold
Courier Symbols Bold
Courier Bold
Courier-BoldItalic
Courier-Italic
Courier Bold Italic
Courier Italic
CenturySchlbk-Roman
GothicText
Century Schoolbook Roman
Gothic Text
GothicKatakana
Gothic Katakana
Helvetica
Helvetica
HelveticaSymbols
HelveticaSymbols-Bold
Helvetica-Bold
Helvetica Symbols
Helvetica Symbols Bold
Helvetica Bold
Helvetica-BoldItalic
Helvetica-Italic
Helvetica Bold Italic
Helvetica Italic
Helvetica-Black
Helvetica Black
Helvetica-BlackOblique
Helvetica-Light
Helvetica Black Oblique
Helvetica Light
Helvetica-LightOblique
Helvetica-Narrow
Helvetica-Narrow-BoldOblique
Helvetica-Narrow-Oblique
LetterGothic
Helvetica Light Oblique
Helvetica Narrow
Helvetica Narrow Bold Oblique
Helvetica Narrow Oblique
Letter Gothic
LetterGothic-Bold
OCRA
Letter Gothic Bold
OCR A
OCRB
OCR B
Palatino-Bold
Palatine Bold
Appendix A. 3130 Font Set 53
Download from Www.Somanuals.com. All Manuals Search And Download.
Font Name used in PostScript Programs
Palatino-BoldItalic
Full Name of Font
Palatino Bold Italic
Palatino-Italic
Palatino Italic
Palatino-Roman
Palatino Roman
Prestige
Prestige
Prestige-Bold
Prestige Bold
Prestige-Italic
Prestige Italic
TimesNewRoman
Times New Roman
Times New Roman Symbols
Times New Roman Symbols Bold
Times New Roman Bold
Times New Roman Bold Italic
Times New Roman Italic
ITC Zapf Chancery Medium Italic
ITC Zapf Dingbats
TimesNewRomanSymbols
TimesNewRomanSymbols-Bold
TimesNewRoman-Bold
TimesNewRoman-BoldItalic
TimesNewRoman-Italic
ZapfChancery-MediumItalic
ZapfDingbats
Duplicate Type 1 Fonts
Font Name used in PostScript Programs
NewCenturySchlbk-BoldItalic
NewCenturySchlbk-Bold
NewCenturySchlbk-Italic
Courier-BoldOblique
Courier-Oblique
Full Name of Font
Century Schoolbook Bold Italic
Century Schoolbook Bold
Century Schoolbook Italic
Courier Bold Italic
Courier Italic
NewCenturySchlbk-Roman
Helvetica-BoldOblique
Helvetica-Oblique
Century Schoolbook Roman
Helvetica Bold Italic
Helvetica Italic
Palatino
Palatino Roman
Times-Roman
Times New Roman
Times-Bold
Times New Roman Bold
Times New Roman Bold Italic
Times New Roman Italic
Times-BoldItalic
Times-Italic
Type 42 Fonts
For six of these fonts, the names are the names of the corresponding Type 1
typeface. Four of them have names tht start with the names of the corresponding
Type 1 typeface, and have a "TT" suffix. The "TT" distinguishes them from the
like-named Type 1 fonts, so that you can access both of them.
54 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Font Name used in PostScript Programs
Arial
Full Name of Font
Arial
Ariel-Bold
Ariel Bold
Arial-BoldItalic
Arial Bold Italic
Arial Italic
Arial-Italic
TimesNewRomanTT
TimesNewRoman-BoldTT
TimesNewRoman-BoldItalicTT
TimesNewRoman-ItalicTT
Wingdings
Times New Roman
Times New Roman Bold
Times New Roman Bold Italic
Times New Roman Italic
Wingdings
Symbol
Symbol
The Arial and Times New Roman font families in this set are provided with the
Windows 3.1 encoding and character set, except that the Medium Shading
character at code point X'7F' is missing.
The Type 42 Symbol font provides all the characters and the same encoding used
in the Adobe Type 1 Symbol font.
PCL5e Resident Font Set
This font set is available in SBCS outline 300 pel only.
Table 35 (Page 1 of 2). PCL5e Resident Fonts
Font
Typefaceion
Font Type (Symbol Set ID)
Number
0
Courier
Intellifont
Intellifont
Intellifont
Intellifont
Intellifont
Intellifont
Intellifont
Intellifont
Intellifont
Intellifont
Intellifont
Intellifont
Intellifont
Intellifont
Intellifont
Intellifont
Intellifont
Intellifont
1
CG Times
2
CG Times Bold
CG Times Italic
CG Times Bold Italic
CG Omega
3
4
5
6
CG Omega Bold
CG Omega Italic
CG Omega Bold Italic
Coronet
7
8
9
10
11
12
13
14
15
16
17
Clarendon Condensed
Univers
Univers Bold
Univers Italic
Univers Bold Italic
Univers Condensed
Univers Condensed Bold
Univers Condensed Italic
Appendix A. 3130 Font Set 55
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 35 (Page 2 of 2). PCL5e Resident Fonts
Font
Typefaceion
Font Type (Symbol Set ID)
Number
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
Univers Condensed Bold Italic
Antique Olive
Intellifont
Intellifont
Antique Olive Bold
Antique Olive Italic
Garamond Antiqua
Garamond Halbfett
Garamond Kursiv
Garamond Kursiv Halbfett
Marigold
Intellifont
Intellifont
Intellifont
Intellifont
Intellifont
Intellifont
Intellifont
Albertus Medium
Albertus Extra Bold
Arial
Intellifont
Intellifont
TrueType
Arial Bold
TrueType
Arial Italic
TrueType
Arial Bold Italic
TrueType
Times New Roman
Times New Roman Bold
Times New Roman Italic
Times New Roman Bold Italic
Symbol
TrueType
TrueType
TrueType
TrueType
TrueType
Wingdings
TrueType
Courier Bold
Intellifont
Courier Italic
Intellifont
Courier Bold Italic
Letter Gothic
Intellifont
Intellifont
Letter Gothic Bold
Letter Gothic Italic
Line Printer Roman-8
Line Printer ISO 8859-1 Latin 1
Line Printer PC-8
Line Printer PC-8 D/N
Line Printer PC-850
Line Printer Legal
Line Printer ISO 8859-2 Latin 2
Line Printer ISO 8859-9 Latin 5
Intellifont
Intellifont
Bitmapped (8U)
Bitmapped (0N)
Bitmapped (10U)
Bitmapped (11U)
Bitmapped (12U)
Bitmapped (1U)
Bitmapped (2N)
Bitmapped (5N)
Note: Intellifont and TrueType font sets are scalable; Bitmapped font sets are not.
Characteristics of the Bitmapped Font Sets are
56 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Spacing Fixed
Pitch
16.67 CPI
Height
Style
8.5 point
Upright
Weight
Medium
PCL5e Language Support
Table 36 (Page 1 of 2). PCL5e Language Support
Symbol
Set ID
Symbol Set
Language
8U
0N
0N
2N
5N
10U
11U
12U
17U
9T
Roman-8
Roman-8
Latin 1
ECMA-94 Latin 1
ISO-8859-1 Latin 1
ISO-8859-2 Latin 2
ISO 8859-9 Latin 5
PC-8
Latin 1
Latin 2
Latin 5
Multilingual
Danish/Norwegian
Multilingual
Latin 2
PC-8 D/N
PC-850
PC-852
PC Turkish
Turkish
19U
9E
Windows 3.1 Latin 1
Windows 3.1 Latin 2
Windows 3.1 Latin 5
Desktop
Latin 1
Latin 2
5T
Latin 5
7J
Multilingual
Multilingual
Multilingual
English
10J
13J
14J
6J
PS Text
Ventra International
Ventura US
Microsoft Publishing
Math-8
Multilingual
Multilingual
Multilingual
Multilingual
Multilingual
Multilingual
UK
8M
5M
6M
15U
1U
1E
PS Math
Ventura Math
Pi Font
Legal
ISO-4 United Kingdom
ISO-6:ASCII
0U
0S
Multilingual
Swedish
Italian
ISO-11 Swedish Names
ISO-15 Italian
ISO-17 Spanish
ISO-21 German
ISO-60 Norwegian V1
ISO-69 French
0I
2S
Spanish
1G
OD
1F
German
Norwegian
French
Appendix A. 3130 Font Set 57
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 36 (Page 2 of 2). PCL5e Language Support
Symbol
Set ID
Symbol Set
Language
9U
Windows 3.0 Latin 1
MC Text
Latin 1
12J
19M
579L
Multilingual
Multilingual
Multilingual
Symbol
Wingdings
58 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B. Software and Hardware Requirements
Important
Table 43 on page 68 summarizes the support that various versions of PSF
provide the 3130. Note that the information it contains is subject to change,
and therefore should be used for general planning only. For more detailed
information about host software requirements, refer to Advanced Function
Presentation: Printer Information, G544-3290.
Attachments
The 3130 supports up to three simultaneously active attachment interfaces with
switching under microcode control. Only one IPDS host can be attached at a time.
The following are standard with every 3130:
Ÿ PC Parallel Interface
Ÿ Ethernet Interface (10BaseT, 10Base2, or 10Base5)
One optional interface slot is available for one of the following:
Ÿ Twinaxial Interface
Ÿ Token-Ring Interface
Ÿ SDLC Interface
The data streams for each attachment are:
Attachment (Protocol)
Twinaxial (Arctic)
Data stream
IPDS
SDLC (SNA LU6.2 V.24)
SDLC (SNA LU6.2 V.35)
Token Ring (SNA LU6.2)
Token Ring (TCP/IP)
IPDS
IPDS
IPDS
IPDS/PCL-5e/PostScript L2
PCL-5e/PostScript L2
IPDS/PCL-5e/PostScript L2
PCL-5e/PostScript L2
PCL-5e/PostScript L2
PCL-5e/PostScript L2
Token Ring (Novell SPX/IPX)
Ethernet (TCP/IP)
Ethernet (Novell SPX/IPX)
PC Parallel (Converged)
Network Print Server*
* For Novell SPX/IPX, NetBios, and TCP/IP
Copyright IBM Corp. 1994, 1996
Download from Www.Somanuals.com. All Manuals Search And Download.
59
Intelligent Printer Data Stream (IPDS) Considerations
Host system software is required for attaching to the host system and for creating
the IPDS data stream. System software is the same set of AFP programs that are
used for the AFP family of printers. The following central processing unit (CPU)
configurations support the 3130:
Ÿ AS/400
Ÿ PS/2 and PC Local Area Networks (LAN)
Ÿ RISC System/6000 LAN
Ÿ ES/4381
Ÿ 308X
Ÿ ES/3090
Ÿ ES/9000
Ÿ ES/9370
Ÿ ES/9371
Connectivity to the host processors is through the following architectures:
Ÿ Twinaxial
Ÿ SDLC (SNA V.24 19.2 Kbps)
Ÿ SDLC (SNA V.35 56 Kbps)
Ÿ Token-Ring (SNA)
Ÿ Token-Ring (TCP/IP)
Ÿ Ethernet (TCP/IP)
Table 37. MVS Support
System
SDLC (SNA)
Token-Ring (SNA)
Token-Ring (TCP/IP)
Ethernet (TCP/IP)
ES/4381
308X
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
ES/3090
ES/9000
ES/9370
ES/9371
No
Table 38. VSE Support
System
SDLC (SNA)
Token-Ring (SNA)
ES/4381
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
308X
ES/3090
ES/9000
ES/9370
ES/9371
No
60 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 39. VM Support
System
SDLC (SNA)
Yes
Token-Ring (SNA)
ES/4381
Yes
Yes
Yes
Yes
Yes
Yes
308X
Yes
ES/3090
Yes
ES/9000
Yes
ES/9370
Yes
ES/9371
Yes
Table 40. Other Support
System
Twinax
SDLC
(SNA)
Token-Ring
(SNA)
Token-Ring
(TCP/IP)
Ethenet
(TCP/IP)
AS/400
PS/2
Yes
No
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
V.24 only
No
Yes
RISC/6000
No
Yes
PCL-5e and PostScript Considerations
The 3130 can support PCL-5e and PostScript through a variety of attachments.
This section describes a few of them, but it is not a complete list.
Network Operating Systems
IBM OS/2 LAN Server
Ÿ Token Ring using TCP/IP and Ethernet using TCP/IP
Ÿ Network Print Server using TCP/IP and NetBios
Novell NetWare: Novell NetWare 3.11 and later releases support the 3130.
Ÿ Token Ring using IPX/SPX for print server mode only
Ÿ Ethernet using IPX/SPX for print server mode only
Ÿ Network print server attached to the printer PC parallel interface for remote
printer mode or print server mode on Token Ring or Ethernet
Microsoft LAN Manager
Ÿ Token Ring using TCP/IP and Ethernet using TCP/IP
Ÿ Network Print Server using TCP/IP and NetBios
PCL-5e and PostScript Drivers
Although Table 41 on page 62 shows the drivers that are shipped with the 3130,
IBM recommends that you get these drivers from the Internet and install them on
your system before your machine arrives. The Universal Resource Locator (URL)
for the World Wide Web is
http://www.can.ibm.com/ibmprinters
Note: Each driver has a README file. Print it and read it before installing or
using the driver.
Appendix B. Software and Hardware Requirements 61
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 41. PCL-5e and PostScript Drivers
Driver Description
Windows PCL
Windows PostScript
OS/2 PCL
File Name
3130WIN.PCL
3130WIN.PS
3130OS2.PCL
3130OS2.PS
3130.pcl
Diskette Format
DOS
DOS
DOS
OS/2 PostScript
AIX PCL-5e
DOS
DOS
AIX PostScript
3130.ps
DOS
Table 42 lists several of the supported PCL-5e and PostScript systems and
attachments.
Table 42. PCL-5e and PostScript Attachment Support
System
DOS
Driver
PC Parallel
Yes
TCP/IP (*)
Yes
NetWare (*)
Yes
Windows 3.1 +
OS/2 2.11 +
colon file
OS/2
Yes
Yes
Yes
RISC/6000
Yes
Yes
Yes
Note: (*) Supports both Token-Ring and Ethernet
IBM PS/2 and PC: The following workstation software supports the 3130 with
PCL-5e and PostScript L2 data streams through print drivers shipped with the
printer:
Ÿ OS/2 2.11 Service Pack and later (32 bit support only), including the OS/2 LAN
Server
Note: Before using IBM printer drivers on OS/2 2.11, obtain and install
FixPac, XR_B103 on your workstation. To obtain FixPac, contact IBM OS/2
Support at 1-407-994-5544.
Ÿ Microsoft Windows 3.1 and Windows 95
RISC System/6000: AIX supports the 3130 through a “colon” file driver diskette
shipped with the printer. AIX Version 3.2.5 and Version 4.1 are supported.
OS/400 Host Print Transforms
If you need to transform AFP into PCL-5e, OS/400 requires customization objects.
See “Host Print Transforms for OS/400” on page 64 for more information about
these objects.
PSF Support Notes
Basic N_Up and Enhanced N_Up Printing:
Ÿ Basic N_UP
Enables printing output that places one, two, three, or four pages in sequence
in equal-sized partitions on each side of a sheet. Two 8.5 x 11 inch application
pages can print two-up on a single 11 x 17 inch sheet. For duplex operations,
each side of the form or sheet can have up to four pages.
62 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Ÿ Enhanced N_UP (Page Positioning)
Enables the following:
– Page Orientation – places individual pages in any position on either side of
the sheet in any orientation and in any size that fits on the sheet.
– Overlays – places overlays relative to any partition origin with or without
variable page data from the application program. You can specify different
overlays for each page.
– Offsets – specifies different offsets for each page.
– Form Ejection – ejects to a new partition or a new sheet.
PSF/MVS Support
Ÿ PSF/MVS V2.2.0:
– With APAR OW12840, supports TCP/IP (Token Ring and Ethernet)
– With APAR OW15018, allows the 3130 to accept input from non-IPDS
attachments intermittently while the PSF attachment is active
– With APAR OW14128, supports DBCS scalable (outline) fonts and capture
of raster fonts
– Supports N_UP
– With APAR OW03243, supports Enhanced N_Up
– With APAR OW08340 and IBM Font Collection for Operating Systems
installed, can:
- Activate the proper resident fonts without using the APSRMARK utility
- Use downloaded and printer-resident outline fonts
– Media-Destination Selection Function (Multiple Output Bin) support applies
to:
- MVS/ESA V4.2.0, V4.3.0, and V5.1.0
- MVS/ESA JES3 V4.2.1 in support of PSF/MVS V2.2.0
For multiple output bin support:
- PSF/MVS V2.2. with APAR OW07348
- MVS/ESA V4.2.0, V4.3.0, and V5.1.0 with APAR OW04349
- MVS/ESA JES3 V4.2.1 with APAR OW07286
Ÿ PSF/MVS V2.1 and later:
– APAR OW08127 is required for five input bin support
– The resident 3130 Core Set outline fonts are activated by host library raster
fonts if you have identified them using the APSRMARK utility
– PSF/MVS V2.1 does not support multiple input bins at the copy subgroup
level
– With APAR OW16190 supports capture of raster fonts
PSF/VSE Support
To use resident fonts, identify them to PSF/VSE, using the APTRMARK utility.
Resident fonts are not supported when using the Data Facility Product (DFP).
Appendix B. Software and Hardware Requirements 63
Download from Www.Somanuals.com. All Manuals Search And Download.
PSF/VM Support
PSF/VM does not support resident fonts; however, you can print with fully
described downloaded fonts.
PSF For OS/400 Support
Ÿ Version 3.1:
– Requires a PTF for native 3130 support
– Supports Basic N_Up but not Enhanced N_Up
– Requires a PTF for DBCS resident font support
– Does not support the font capture function
Ÿ Version 3.0.5:
– Requires Cum Tape C4263305
– Does not support N_Up or Enhanced N_Up
– Configure the 3130 as a 3935
– Supports outline font scaling only for whole font sizes (for example, 10, 12,
15 CPI ...)
Ÿ Version 2.3
– Requires Cum Tape CA193230
– Requires PTF C4193230
– Does not support N_Up or Enhanced N_Up
– Configures the 3130 as a 3935
– Supports outline fonts scaling only for whole font sizes (for example, 10,
12, 15 CPI ...)
Ÿ Version 2.2:
– This version went out of service on 31 March 95; it is included for reference
only
– Requires PTF SF16030 and SF16187
– Only letter (8.5 x 11 in.) and legal (8.5 x 14 in.) size paper are supported
– IBM AFP Multiple-up page capability is not supported; multiple-up page
capability is available only by using the OS/400 function
– Only the printer default output bin is supported (#5, first top stacker)
– Supports outline font scaling only for whole font sizes (for example, 10, 12,
15 CPI ...)
Ÿ Printing with the large print function for OfficeVision/400 on the AS/400 is not
supported by the 3130; also, the AS/400 (DDS) key word CHRSIZ function is
not supported by the 3130.
Ÿ Bolding is not supported on the following fonts when using OfficeVision/400 or
the AS/400 (DDS) key word HIGHLIGHT function: Boldface, Gothic Text,
Gothic Katakana, OCR A, OCR B, Prestige Italic, or fonts that are already
bold-faced fonts.
Host Print Transforms for OS/400
Transforming an AFP or SCS data stream to PCL-5e requires one of several 3130
Customization Objects:
Ÿ IBM3130A: Is the Advanced Customization object for duplex and high-capacity
simplex models. It contains tags for AFP-to-PCL5e transform support and
requires V3.1 and PTF SF25752. The host supports all input paper trays.
64 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Ÿ IBM313SA: Is the Advanced Customization object for the Model 01S (simplex).
It contains tags for AFP-to-PCL5e transform support and requires V3.1 and
PTF SF25752. The host supports selecting the side input tray (drawer 1), the
top front input tray (drawer 2), and the optional envelope feeder.
Ÿ IBM3130: Is the pre-V3.1 Customization object for duplex and high-capacity
simplex models. It operates with V2.3 or later. The host supports selecting the
main and lower side tray and the optional envelope feeder.
Ÿ IBM313SA: Is the pre-V3.1 Customization object for the Model 01S (simplex).
It operates with V2.3 or later. The host supports selecting the side input tray
(drawer 1), the top front input tray (drawer 2), and the optional envelope feeder.
PSF/2 Support
Ÿ Resident fonts are not supported when using the DPF function of PSF/2.
Ÿ When using “PSF Direct,” the function supported is equivalent to that provided
by the host PSF.
PSF for AIX Support
When using “PSF Direct,” the function supported is equivalent to that provided by
the host PSF.
System Test
SNA Token-Ring uses NetView for recording errors. Token-Ring uses the ‘Self
Test Frame’ on the ring itself.
For AS/400, use the Verify Print (VFYPRT) command to obtain the printer type and
send a test print. The AS/400 uses ERAPs to log errors.
Applications (IPDS)
The 3130 prints text data referred to as Coded Information, image data referred to
as Non-Coded Information, and GDDM raster graphics. You can print all of these
at any location on the printed page and in any combination. Printing the mixture or
combination of data at any printed page location is called all points addressable or
APA printing.
Token Ring Network Attachment
For details on SNA, TCP/IP, or NetWare attachment, see IBM InfoPrint 60; 3130,
3160, and 3935 Advanced Function Printer: Attachment Configuration Handbook.
The 3130 connects to a host Token-Ring through the IBM Token-Ring cabling. It
uses the Auto Token-Ring LANStreamer Adapter which is installed in the AFCCU.
The adapter and an 8-foot long external cable are provided when this feature is
ordered. The external cable is connected to an IBM 8228 Token-Ring Multistation
Access Unit or an IBM 8230 Token-Ring Network Controller Access Unit, which is
connected as follows:
Ÿ Directly to a PS/2, AS/400, or RISC System/6000 CPU
Ÿ To a 3172, 3174, 3720, 3725, or 3745, which in turn is connected directly to a
ES/4381, 308X, ES/3090, or ES/9000 CPU
Appendix B. Software and Hardware Requirements 65
Download from Www.Somanuals.com. All Manuals Search And Download.
The control unit can attach to either a 4Mbps or 16Mbps Token-Ring Local Area
Network.
The attachment adheres to the IBM Token-Ring Network OEMI. The following
documents, together, compose the IBM Token-Ring Network Other Equipment
Manufacture Interface:
Ÿ IBM Cabling System Technical Interface Specification, GA27-3773
Ÿ IBM Local Area Network Technical Reference, SC30-3383
Ÿ IBM Token-Ring Area Network Architecture Reference, SC30-3374
Ÿ Carrier Sense Multiple Access with Collision Detection, IEEE Std 802.3-1985
Ÿ Token-Ring Access Method and Physical Layer Specification, IEEE Standard
802.5-1989
The 3130 can be a maximum distance of 100 meters from the 8228 Multistation
Access Unit or 8230 Controlled Access Unit. For more information, refer to the
8228 and 8230 Product Publications. For cable attachment options from the 8228
or 8230 to the host system CPU, refer to the specific CPU cabling information.
Ethernet Network Attachment
For details on TCP/IP or NetWare attachment, see IBM InfoPrint 60; 3130, 3160,
and 3935 Advanced Function Printer: Attachment Configuration Handbook.
The 3130 offers one of three Ethernet attachment types as an optional feature:
10Base-T (Twisted Pair)
The 3130 can attach to standard Twisted Pair (10BaseT) cable. The feature
attachment includes the type 10BaseT transceiver and the transceiver cable used
to connect the transceiver to the printer. RJ45 unshielded twisted pair cable (which
must meet IEEE 802.3 requirements) is required to attach the 10BaseT transceiver
to the Ethernet Twisted Pair Network. A wrap plug is included with the feature for
diagnostic purposes.
Connection can be either directly to a RISC System/6000 or to a 8250 or 8260
Twisted Pair Hub (which connects to a RISC System/6000 or a PS/2).
10Base2 (Thin Coaxial)
The 3130 can attach to standard Thin type 10Base2 Ethernet coaxial cable. The
attachment includes the type 10Base2 transceiver and the transceiver cable used
to connect the transceiver to the printer. The transceiver attaches to a standard
Thin Ethernet Network. A wrap plug is included with the feature for diagnostic
purposes.
Connection is made directly to a RISC System/6000, PS/2, or AS/400.
10Base5 (Thick Coaxial)
The 3130 can attach to standard Thick type 10Base5 Ethernet coaxial cable. A
type 10Base5 cable is required to connect the D-connector on the printer to the
10Base5 network. A wrap plug is included with the feature for diagnostic purposes.
Connection is made directly to a RISC System/6000, PS/2, or AS/400.
66 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
PSF Support Summary
Table 43 on page 68 summarizes the support that various versions of PSF provide
the 3130.
Appendix B. Software and Hardware Requirements 67
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 43. PSF Support Summary (IPDS)
PSF/MVS
PSF for OS/400
PSF/6000
V1.2/ PSF
for AIX
V2.1
V2.1,
V.2.1.1
PSF/VSE
V2.2.1
PSF/VM
V2.1.1
V2.3,
V3.0.5
PSF/2
V2.0
Function
V2.2.0
V3.1
V2.2
Base Support:
3935 Emulation
Native
No
Yes
No
Yes
Yes
Yes
Yes (PTF)
No
Yes (PTF)
No
NA/NA
NA
Yes
Yes
Yes
Yes
NA/NA
NA
300 Pel
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes/Yes
Yes/Yes
Yes
240 Pel
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Multiple Input (sources)
Yes (5)
Yes (5)
Yes (5)
Yes (5)
Yes (5)
Yes (4)
Yes (3)
Yes
Yes (4)
(4)/Yes (5)
Multiple Output (stackers)
IPDS Towers:
Yes (3)
All
No
All
Yes (3)
All
No
All
Yes (3)
All
No
All
No
All
No/Yes
All/All
No
All
Printer Connectivity:
Token-ring SNA
SDLC SNA
Yes
Yes
Yes
Yes
No
Yes
Yes
No
Yes
Yes
No
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
No
No/No
No/No
Yes/Yes
Yes/Yes
No/No
Yes
Yes
Yes
Yes
Yes
No
Ethernet TCP/IP
Token-Ring TCP/IP
Twinaxial
No
No
No
No
No
No
No
No
Yes
Yes
No
Downloadable Raster Fonts
Downloadable Outline Fonts
SBCS
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
No
No
No
No
No
No/Yes
No/No
No
No
DBCS
SBCS Font Resident
4028 (Raster)
Yes
Yes
No
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
Yes
Yes
Yes
No
Yes
Yes
Yes
No
No
No
No
No
No
No
No
No
No
Yes
No
No
No
No
No
Core
Coordinated
DBCS Resident Fonts (Rasters)
DBCS Resident Fonts (Outline)
Yes
Yes
Yes
No
No
No
Download from Www.Somanuals.com. All Manuals Search And Download.
Attachment Hardware
Ÿ The Ethernet TCP/IP interface attaches to the following network configurations:
– RS/6000, AS/400, and PS/2 Ethernet 10BaseT Networks
– RS/6000, AS/400, and PS/2 Ethernet 10Base2 Networks
– RS/6000, AS/400, and PS/2 Ethernet 10Base5 Networks
– ES/4381, 308X, ES/3090, or ES/9000 CPU
Ÿ The Ethernet NetWare interface attaches to the following network
configurations:
– RS/6000 and PS/2 Ethernet 10BaseT Networks
– RS/6000 and PS/2 Ethernet 10Base2 Networks
– RS/6000 and PS/2 Ethernet 10Base5 Networks
Ÿ The Token-Ring TCP/IP interface attaches to either 4Mbps or 16Mbps Token
Ring networks through the following devices:
– 8228 Token-Ring Multistation Access Unit attached to an RS/6000, an
AS/400, or a PS/2
– 8230 Token-Ring Network Controller Access Unit attached to an RS/6000,
an AS/400, or a PS/2
Ÿ The Token-Ring NetWare interface attaches to either 4Mbps or 16Mbps
Token-Ring networks through the following devices:
– 8228 Token-Ring Multistation Access Unit attached to an RS/6000 or a
PS/2
– 8230 Token-Ring Network Controller Access Unit attached to an RS/6000
or a PS/2
Ÿ The SNA Token-Ring interface attaches to either 4 or 16 Mbps Token Ring
networks through the following devices:
– 8228 Token-Ring Multistation Access Unit attached to an AS/400 or PS/2
processor
– 8230 Token-Ring Network Controller Access Unit attached to an AS/400 or
PS/2 processor
– 8228 Token-Ring Multistation Access Unit attached to 3172, 3174, 3745,
3725, or 3720, which in turn is attached to a 3090, ES/9000, 308X, or 4381
processor
– 8230 Token-Ring Network Controller Access Unit attached to a 3172, 3174,
3745, 3725, or 3720, which in turn is attached to a 3090, ES/9000, 308X,
or 4381 processor
Ÿ The SDLC V.35 with SNA at 56 Kbps interface attaches to the following
devices:
– 5822 Communications Network Management Data/Channel Service
attached to a 9370, 9371, or AS/400 processor
– 5822 Communications Network Management Data/Channel Service
attached to a 3745, 3725, 3720, or 3705 Communication Controller, which
in turn is attached to a 3090, ES/9000, 308X, or 4381 processor.
Ÿ The SDLC EIA-232 V.24 with SNA at 19.2 Kbps interface attaches to the
following devices:
– 7861-047 Modem attached to a 9370, 9371, or AS/400 processor
Appendix B. Software and Hardware Requirements 69
Download from Www.Somanuals.com. All Manuals Search And Download.
– 7861-047 Modem attached to a 3745, 3725, 3720, or 3705 Communication
Controller, which in turn is attached to a 3090, ES/9000, 308X, or 4381
processor
– 7861-047 Modem attached to a PS/2 (PS/2 has an IBM Multiprotocol
Adapter and PSF/2 software).
Ÿ The Twinaxial interface attaches to the following devices:
– AS/400 Twinaxial Workstation Controllers
– 5394 Remote Control Unit attached to AS/400
– 5494 Remote Control Unit attached to AS/400
Ÿ The PC Parallel interface port supports a subset of the IEEE 1284 Standard.
This includes Compatability Mode.
It does not support bi-directional communication. The PC parallel interface
supports attachment to:
– RISC System/6000 workstations, excluding POWERServer 930
– PS/2 computer LPTx ports
– Direct LAN attachment using the IBM 4033 LAN Connection
– Network Print Server
– Non-IBM personal computers using the Centronics Parallel interface
70 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B. Software and Hardware Requirements
Important
Table 43 on page 68 summarizes the support that various versions of PSF
provide the 3130. Note that the information it contains is subject to change,
and therefore should be used for general planning only. For more detailed
information about host software requirements, refer to Advanced Function
Presentation: Printer Information, G544-3290.
Attachments
The 3130 supports up to three simultaneously active attachment interfaces with
switching under microcode control. Only one IPDS host can be attached at a time.
The following are standard with every 3130:
Ÿ PC Parallel Interface
Ÿ Ethernet Interface (10BaseT, 10Base2, or 10Base5)
One optional interface slot is available for one of the following:
Ÿ Twinaxial Interface
Ÿ Token-Ring Interface
Ÿ SDLC Interface
The data streams for each attachment are:
Attachment (Protocol)
Twinaxial (Arctic)
Data stream
IPDS
SDLC (SNA LU6.2 V.24)
SDLC (SNA LU6.2 V.35)
Token Ring (SNA LU6.2)
Token Ring (TCP/IP)
IPDS
IPDS
IPDS
IPDS/PCL-5e/PostScript L2
PCL-5e/PostScript L2
IPDS/PCL-5e/PostScript L2
PCL-5e/PostScript L2
PCL-5e/PostScript L2
PCL-5e/PostScript L2
Token Ring (Novell SPX/IPX)
Ethernet (TCP/IP)
Ethernet (Novell SPX/IPX)
PC Parallel (Converged)
Network Print Server*
* For Novell SPX/IPX, NetBios, and TCP/IP
Copyright IBM Corp. 1994, 1996
Download from Www.Somanuals.com. All Manuals Search And Download.
59
Intelligent Printer Data Stream (IPDS) Considerations
Host system software is required for attaching to the host system and for creating
the IPDS data stream. System software is the same set of AFP programs that are
used for the AFP family of printers. The following central processing unit (CPU)
configurations support the 3130:
Ÿ AS/400
Ÿ PS/2 and PC Local Area Networks (LAN)
Ÿ RISC System/6000 LAN
Ÿ ES/4381
Ÿ 308X
Ÿ ES/3090
Ÿ ES/9000
Ÿ ES/9370
Ÿ ES/9371
Connectivity to the host processors is through the following architectures:
Ÿ Twinaxial
Ÿ SDLC (SNA V.24 19.2 Kbps)
Ÿ SDLC (SNA V.35 56 Kbps)
Ÿ Token-Ring (SNA)
Ÿ Token-Ring (TCP/IP)
Ÿ Ethernet (TCP/IP)
Table 37. MVS Support
System
SDLC (SNA)
Token-Ring (SNA)
Token-Ring (TCP/IP)
Ethernet (TCP/IP)
ES/4381
308X
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
ES/3090
ES/9000
ES/9370
ES/9371
No
Table 38. VSE Support
System
SDLC (SNA)
Token-Ring (SNA)
ES/4381
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
308X
ES/3090
ES/9000
ES/9370
ES/9371
No
60 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 39. VM Support
System
SDLC (SNA)
Yes
Token-Ring (SNA)
ES/4381
Yes
Yes
Yes
Yes
Yes
Yes
308X
Yes
ES/3090
Yes
ES/9000
Yes
ES/9370
Yes
ES/9371
Yes
Table 40. Other Support
System
Twinax
SDLC
(SNA)
Token-Ring
(SNA)
Token-Ring
(TCP/IP)
Ethenet
(TCP/IP)
AS/400
PS/2
Yes
No
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
V.24 only
No
Yes
RISC/6000
No
Yes
PCL-5e and PostScript Considerations
The 3130 can support PCL-5e and PostScript through a variety of attachments.
This section describes a few of them, but it is not a complete list.
Network Operating Systems
IBM OS/2 LAN Server
Ÿ Token Ring using TCP/IP and Ethernet using TCP/IP
Ÿ Network Print Server using TCP/IP and NetBios
Novell NetWare: Novell NetWare 3.11 and later releases support the 3130.
Ÿ Token Ring using IPX/SPX for print server mode only
Ÿ Ethernet using IPX/SPX for print server mode only
Ÿ Network print server attached to the printer PC parallel interface for remote
printer mode or print server mode on Token Ring or Ethernet
Microsoft LAN Manager
Ÿ Token Ring using TCP/IP and Ethernet using TCP/IP
Ÿ Network Print Server using TCP/IP and NetBios
PCL-5e and PostScript Drivers
Although Table 41 on page 62 shows the drivers that are shipped with the 3130,
IBM recommends that you get these drivers from the Internet and install them on
your system before your machine arrives. The Universal Resource Locator (URL)
for the World Wide Web is
http://www.can.ibm.com/ibmprinters
Note: Each driver has a README file. Print it and read it before installing or
using the driver.
Appendix B. Software and Hardware Requirements 61
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 41. PCL-5e and PostScript Drivers
Driver Description
Windows PCL
Windows PostScript
OS/2 PCL
File Name
3130WIN.PCL
3130WIN.PS
3130OS2.PCL
3130OS2.PS
3130.pcl
Diskette Format
DOS
DOS
DOS
OS/2 PostScript
AIX PCL-5e
DOS
DOS
AIX PostScript
3130.ps
DOS
Table 42 lists several of the supported PCL-5e and PostScript systems and
attachments.
Table 42. PCL-5e and PostScript Attachment Support
System
DOS
Driver
PC Parallel
Yes
TCP/IP (*)
Yes
NetWare (*)
Yes
Windows 3.1 +
OS/2 2.11 +
colon file
OS/2
Yes
Yes
Yes
RISC/6000
Yes
Yes
Yes
Note: (*) Supports both Token-Ring and Ethernet
IBM PS/2 and PC: The following workstation software supports the 3130 with
PCL-5e and PostScript L2 data streams through print drivers shipped with the
printer:
Ÿ OS/2 2.11 Service Pack and later (32 bit support only), including the OS/2 LAN
Server
Note: Before using IBM printer drivers on OS/2 2.11, obtain and install
FixPac, XR_B103 on your workstation. To obtain FixPac, contact IBM OS/2
Support at 1-407-994-5544.
Ÿ Microsoft Windows 3.1 and Windows 95
RISC System/6000: AIX supports the 3130 through a “colon” file driver diskette
shipped with the printer. AIX Version 3.2.5 and Version 4.1 are supported.
OS/400 Host Print Transforms
If you need to transform AFP into PCL-5e, OS/400 requires customization objects.
See “Host Print Transforms for OS/400” on page 64 for more information about
these objects.
PSF Support Notes
Basic N_Up and Enhanced N_Up Printing:
Ÿ Basic N_UP
Enables printing output that places one, two, three, or four pages in sequence
in equal-sized partitions on each side of a sheet. Two 8.5 x 11 inch application
pages can print two-up on a single 11 x 17 inch sheet. For duplex operations,
each side of the form or sheet can have up to four pages.
62 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Ÿ Enhanced N_UP (Page Positioning)
Enables the following:
– Page Orientation – places individual pages in any position on either side of
the sheet in any orientation and in any size that fits on the sheet.
– Overlays – places overlays relative to any partition origin with or without
variable page data from the application program. You can specify different
overlays for each page.
– Offsets – specifies different offsets for each page.
– Form Ejection – ejects to a new partition or a new sheet.
PSF/MVS Support
Ÿ PSF/MVS V2.2.0:
– With APAR OW12840, supports TCP/IP (Token Ring and Ethernet)
– With APAR OW15018, allows the 3130 to accept input from non-IPDS
attachments intermittently while the PSF attachment is active
– With APAR OW14128, supports DBCS scalable (outline) fonts and capture
of raster fonts
– Supports N_UP
– With APAR OW03243, supports Enhanced N_Up
– With APAR OW08340 and IBM Font Collection for Operating Systems
installed, can:
- Activate the proper resident fonts without using the APSRMARK utility
- Use downloaded and printer-resident outline fonts
– Media-Destination Selection Function (Multiple Output Bin) support applies
to:
- MVS/ESA V4.2.0, V4.3.0, and V5.1.0
- MVS/ESA JES3 V4.2.1 in support of PSF/MVS V2.2.0
For multiple output bin support:
- PSF/MVS V2.2. with APAR OW07348
- MVS/ESA V4.2.0, V4.3.0, and V5.1.0 with APAR OW04349
- MVS/ESA JES3 V4.2.1 with APAR OW07286
Ÿ PSF/MVS V2.1 and later:
– APAR OW08127 is required for five input bin support
– The resident 3130 Core Set outline fonts are activated by host library raster
fonts if you have identified them using the APSRMARK utility
– PSF/MVS V2.1 does not support multiple input bins at the copy subgroup
level
– With APAR OW16190 supports capture of raster fonts
PSF/VSE Support
To use resident fonts, identify them to PSF/VSE, using the APTRMARK utility.
Resident fonts are not supported when using the Data Facility Product (DFP).
Appendix B. Software and Hardware Requirements 63
Download from Www.Somanuals.com. All Manuals Search And Download.
PSF/VM Support
PSF/VM does not support resident fonts; however, you can print with fully
described downloaded fonts.
PSF For OS/400 Support
Ÿ Version 3.1:
– Requires a PTF for native 3130 support
– Supports Basic N_Up but not Enhanced N_Up
– Requires a PTF for DBCS resident font support
– Does not support the font capture function
Ÿ Version 3.0.5:
– Requires Cum Tape C4263305
– Does not support N_Up or Enhanced N_Up
– Configure the 3130 as a 3935
– Supports outline font scaling only for whole font sizes (for example, 10, 12,
15 CPI ...)
Ÿ Version 2.3
– Requires Cum Tape CA193230
– Requires PTF C4193230
– Does not support N_Up or Enhanced N_Up
– Configures the 3130 as a 3935
– Supports outline fonts scaling only for whole font sizes (for example, 10,
12, 15 CPI ...)
Ÿ Version 2.2:
– This version went out of service on 31 March 95; it is included for reference
only
– Requires PTF SF16030 and SF16187
– Only letter (8.5 x 11 in.) and legal (8.5 x 14 in.) size paper are supported
– IBM AFP Multiple-up page capability is not supported; multiple-up page
capability is available only by using the OS/400 function
– Only the printer default output bin is supported (#5, first top stacker)
– Supports outline font scaling only for whole font sizes (for example, 10, 12,
15 CPI ...)
Ÿ Printing with the large print function for OfficeVision/400 on the AS/400 is not
supported by the 3130; also, the AS/400 (DDS) key word CHRSIZ function is
not supported by the 3130.
Ÿ Bolding is not supported on the following fonts when using OfficeVision/400 or
the AS/400 (DDS) key word HIGHLIGHT function: Boldface, Gothic Text,
Gothic Katakana, OCR A, OCR B, Prestige Italic, or fonts that are already
bold-faced fonts.
Host Print Transforms for OS/400
Transforming an AFP or SCS data stream to PCL-5e requires one of several 3130
Customization Objects:
Ÿ IBM3130A: Is the Advanced Customization object for duplex and high-capacity
simplex models. It contains tags for AFP-to-PCL5e transform support and
requires V3.1 and PTF SF25752. The host supports all input paper trays.
64 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Ÿ IBM313SA: Is the Advanced Customization object for the Model 01S (simplex).
It contains tags for AFP-to-PCL5e transform support and requires V3.1 and
PTF SF25752. The host supports selecting the side input tray (drawer 1), the
top front input tray (drawer 2), and the optional envelope feeder.
Ÿ IBM3130: Is the pre-V3.1 Customization object for duplex and high-capacity
simplex models. It operates with V2.3 or later. The host supports selecting the
main and lower side tray and the optional envelope feeder.
Ÿ IBM313SA: Is the pre-V3.1 Customization object for the Model 01S (simplex).
It operates with V2.3 or later. The host supports selecting the side input tray
(drawer 1), the top front input tray (drawer 2), and the optional envelope feeder.
PSF/2 Support
Ÿ Resident fonts are not supported when using the DPF function of PSF/2.
Ÿ When using “PSF Direct,” the function supported is equivalent to that provided
by the host PSF.
PSF for AIX Support
When using “PSF Direct,” the function supported is equivalent to that provided by
the host PSF.
System Test
SNA Token-Ring uses NetView for recording errors. Token-Ring uses the ‘Self
Test Frame’ on the ring itself.
For AS/400, use the Verify Print (VFYPRT) command to obtain the printer type and
send a test print. The AS/400 uses ERAPs to log errors.
Applications (IPDS)
The 3130 prints text data referred to as Coded Information, image data referred to
as Non-Coded Information, and GDDM raster graphics. You can print all of these
at any location on the printed page and in any combination. Printing the mixture or
combination of data at any printed page location is called all points addressable or
APA printing.
Token Ring Network Attachment
For details on SNA, TCP/IP, or NetWare attachment, see IBM InfoPrint 60; 3130,
3160, and 3935 Advanced Function Printer: Attachment Configuration Handbook.
The 3130 connects to a host Token-Ring through the IBM Token-Ring cabling. It
uses the Auto Token-Ring LANStreamer Adapter which is installed in the AFCCU.
The adapter and an 8-foot long external cable are provided when this feature is
ordered. The external cable is connected to an IBM 8228 Token-Ring Multistation
Access Unit or an IBM 8230 Token-Ring Network Controller Access Unit, which is
connected as follows:
Ÿ Directly to a PS/2, AS/400, or RISC System/6000 CPU
Ÿ To a 3172, 3174, 3720, 3725, or 3745, which in turn is connected directly to a
ES/4381, 308X, ES/3090, or ES/9000 CPU
Appendix B. Software and Hardware Requirements 65
Download from Www.Somanuals.com. All Manuals Search And Download.
The control unit can attach to either a 4Mbps or 16Mbps Token-Ring Local Area
Network.
The attachment adheres to the IBM Token-Ring Network OEMI. The following
documents, together, compose the IBM Token-Ring Network Other Equipment
Manufacture Interface:
Ÿ IBM Cabling System Technical Interface Specification, GA27-3773
Ÿ IBM Local Area Network Technical Reference, SC30-3383
Ÿ IBM Token-Ring Area Network Architecture Reference, SC30-3374
Ÿ Carrier Sense Multiple Access with Collision Detection, IEEE Std 802.3-1985
Ÿ Token-Ring Access Method and Physical Layer Specification, IEEE Standard
802.5-1989
The 3130 can be a maximum distance of 100 meters from the 8228 Multistation
Access Unit or 8230 Controlled Access Unit. For more information, refer to the
8228 and 8230 Product Publications. For cable attachment options from the 8228
or 8230 to the host system CPU, refer to the specific CPU cabling information.
Ethernet Network Attachment
For details on TCP/IP or NetWare attachment, see IBM InfoPrint 60; 3130, 3160,
and 3935 Advanced Function Printer: Attachment Configuration Handbook.
The 3130 offers one of three Ethernet attachment types as an optional feature:
10Base-T (Twisted Pair)
The 3130 can attach to standard Twisted Pair (10BaseT) cable. The feature
attachment includes the type 10BaseT transceiver and the transceiver cable used
to connect the transceiver to the printer. RJ45 unshielded twisted pair cable (which
must meet IEEE 802.3 requirements) is required to attach the 10BaseT transceiver
to the Ethernet Twisted Pair Network. A wrap plug is included with the feature for
diagnostic purposes.
Connection can be either directly to a RISC System/6000 or to a 8250 or 8260
Twisted Pair Hub (which connects to a RISC System/6000 or a PS/2).
10Base2 (Thin Coaxial)
The 3130 can attach to standard Thin type 10Base2 Ethernet coaxial cable. The
attachment includes the type 10Base2 transceiver and the transceiver cable used
to connect the transceiver to the printer. The transceiver attaches to a standard
Thin Ethernet Network. A wrap plug is included with the feature for diagnostic
purposes.
Connection is made directly to a RISC System/6000, PS/2, or AS/400.
10Base5 (Thick Coaxial)
The 3130 can attach to standard Thick type 10Base5 Ethernet coaxial cable. A
type 10Base5 cable is required to connect the D-connector on the printer to the
10Base5 network. A wrap plug is included with the feature for diagnostic purposes.
Connection is made directly to a RISC System/6000, PS/2, or AS/400.
66 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
PSF Support Summary
Table 43 on page 68 summarizes the support that various versions of PSF provide
the 3130.
Appendix B. Software and Hardware Requirements 67
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 43. PSF Support Summary (IPDS)
PSF/MVS
PSF for OS/400
PSF/6000
V1.2/ PSF
for AIX
V2.1
V2.1,
V.2.1.1
PSF/VSE
V2.2.1
PSF/VM
V2.1.1
V2.3,
V3.0.5
PSF/2
V2.0
Function
V2.2.0
V3.1
V2.2
Base Support:
3935 Emulation
Native
No
Yes
No
Yes
Yes
Yes
Yes (PTF)
No
Yes (PTF)
No
NA/NA
NA
Yes
Yes
Yes
Yes
NA/NA
NA
300 Pel
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes/Yes
Yes/Yes
Yes
240 Pel
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Multiple Input (sources)
Yes (5)
Yes (5)
Yes (5)
Yes (5)
Yes (5)
Yes (4)
Yes (3)
Yes
Yes (4)
(4)/Yes (5)
Multiple Output (stackers)
IPDS Towers:
Yes (3)
All
No
All
Yes (3)
All
No
All
Yes (3)
All
No
All
No
All
No/Yes
All/All
No
All
Printer Connectivity:
Token-ring SNA
SDLC SNA
Yes
Yes
Yes
Yes
No
Yes
Yes
No
Yes
Yes
No
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
No
No/No
No/No
Yes/Yes
Yes/Yes
No/No
Yes
Yes
Yes
Yes
Yes
No
Ethernet TCP/IP
Token-Ring TCP/IP
Twinaxial
No
No
No
No
No
No
No
No
Yes
Yes
No
Downloadable Raster Fonts
Downloadable Outline Fonts
SBCS
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
No
No
No
No
No
No/Yes
No/No
No
No
DBCS
SBCS Font Resident
4028 (Raster)
Yes
Yes
No
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
Yes
Yes
Yes
No
Yes
Yes
Yes
No
No
No
No
No
No
No
No
No
No
Yes
No
No
No
No
No
Core
Coordinated
DBCS Resident Fonts (Rasters)
DBCS Resident Fonts (Outline)
Yes
Yes
Yes
No
No
No
Download from Www.Somanuals.com. All Manuals Search And Download.
Attachment Hardware
Ÿ The Ethernet TCP/IP interface attaches to the following network configurations:
– RS/6000, AS/400, and PS/2 Ethernet 10BaseT Networks
– RS/6000, AS/400, and PS/2 Ethernet 10Base2 Networks
– RS/6000, AS/400, and PS/2 Ethernet 10Base5 Networks
– ES/4381, 308X, ES/3090, or ES/9000 CPU
Ÿ The Ethernet NetWare interface attaches to the following network
configurations:
– RS/6000 and PS/2 Ethernet 10BaseT Networks
– RS/6000 and PS/2 Ethernet 10Base2 Networks
– RS/6000 and PS/2 Ethernet 10Base5 Networks
Ÿ The Token-Ring TCP/IP interface attaches to either 4Mbps or 16Mbps Token
Ring networks through the following devices:
– 8228 Token-Ring Multistation Access Unit attached to an RS/6000, an
AS/400, or a PS/2
– 8230 Token-Ring Network Controller Access Unit attached to an RS/6000,
an AS/400, or a PS/2
Ÿ The Token-Ring NetWare interface attaches to either 4Mbps or 16Mbps
Token-Ring networks through the following devices:
– 8228 Token-Ring Multistation Access Unit attached to an RS/6000 or a
PS/2
– 8230 Token-Ring Network Controller Access Unit attached to an RS/6000
or a PS/2
Ÿ The SNA Token-Ring interface attaches to either 4 or 16 Mbps Token Ring
networks through the following devices:
– 8228 Token-Ring Multistation Access Unit attached to an AS/400 or PS/2
processor
– 8230 Token-Ring Network Controller Access Unit attached to an AS/400 or
PS/2 processor
– 8228 Token-Ring Multistation Access Unit attached to 3172, 3174, 3745,
3725, or 3720, which in turn is attached to a 3090, ES/9000, 308X, or 4381
processor
– 8230 Token-Ring Network Controller Access Unit attached to a 3172, 3174,
3745, 3725, or 3720, which in turn is attached to a 3090, ES/9000, 308X,
or 4381 processor
Ÿ The SDLC V.35 with SNA at 56 Kbps interface attaches to the following
devices:
– 5822 Communications Network Management Data/Channel Service
attached to a 9370, 9371, or AS/400 processor
– 5822 Communications Network Management Data/Channel Service
attached to a 3745, 3725, 3720, or 3705 Communication Controller, which
in turn is attached to a 3090, ES/9000, 308X, or 4381 processor.
Ÿ The SDLC EIA-232 V.24 with SNA at 19.2 Kbps interface attaches to the
following devices:
– 7861-047 Modem attached to a 9370, 9371, or AS/400 processor
Appendix B. Software and Hardware Requirements 69
Download from Www.Somanuals.com. All Manuals Search And Download.
– 7861-047 Modem attached to a 3745, 3725, 3720, or 3705 Communication
Controller, which in turn is attached to a 3090, ES/9000, 308X, or 4381
processor
– 7861-047 Modem attached to a PS/2 (PS/2 has an IBM Multiprotocol
Adapter and PSF/2 software).
Ÿ The Twinaxial interface attaches to the following devices:
– AS/400 Twinaxial Workstation Controllers
– 5394 Remote Control Unit attached to AS/400
– 5494 Remote Control Unit attached to AS/400
Ÿ The PC Parallel interface port supports a subset of the IEEE 1284 Standard.
This includes Compatability Mode.
It does not support bi-directional communication. The PC parallel interface
supports attachment to:
– RISC System/6000 workstations, excluding POWERServer 930
– PS/2 computer LPTx ports
– Direct LAN attachment using the IBM 4033 LAN Connection
– Network Print Server
– Non-IBM personal computers using the Centronics Parallel interface
70 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Bibliography
The documentation listed in this bibliography contain
detailed information related to subjects discussed in the
3130 Documentation Library. For information about
how to order these documents, contact your local IBM
branch office.
Order
Document Title
Number
About Type: IBM’s Technical Reference for Digitized Type
S544-3516
About Type: IBM’s Typographic Primer for Digitized Type Program Products
About Type: IBM’s Guide for Type Users
G544-3183
G544-3122
G544-3186
G544-3825
G544-3135
G544-3290
G221-3075
G544-3876
S544-3190
G320-9875
S544-3115
G544-3915
S544-3977
S5445328
S544-5337
57G5477
About Type: IBM’s Typographic Primer for Digitized Type Supplement
Advanced Function Printing: Managing the Presentation of Information
Advanced Function Presentation: Printer Summary
Advanced Function Presentation: Printer Information
Advanced Function Image and Graphics
Guide to Advanced Function Presentation
IBM Bar Code Fonts User’s Guide
Bar Codes Brochure
IBM Document Composition Facility: Bar Code User’s Guide
Advanced Function Printer Cut-Sheet Paper Reference for use with IBM Electrophotographic Printers
IBM InfoPrint 60; 3130, 3160, and 3935 Advanced Function Printer: Attachment Configuration Handbook
IBM 3130 Advanced Function Printer: Administrator's Guide
3130 Advanced Function Printer User’s Guide
IBM 3130 Advanced Function Printer Maintenance Information (Volume 1)
IBM 3130 Advanced Function Printer Maintenance Information (Volume 2)
IBM 3130 Advanced Function Printer Safety Notices
57G5478
S544-3978
GH20-9158
ZC20-1699
GC33-0319
SC33-0327
SC33-0321
SC33-0322
G544-3895
S544-3417
G544-3691
GC22-7064
Document Composition Facility and Document Library Facility General Information
IBM Dictionary of Computing
Graphical Data Display Manager General Information
Graphical Data Display Manager Guide for User’s
Graphical Data Display Manager Installation and System Management for MVS
Graphical Data Display Manager Installation and System Management for VSE
IPDS Handbook for Printers That Use the Advanced Function Common Control Unit
IBM Intelligent Printer Data Stream Reference
OGL/370: Getting Started
IBM System/360, System/370, 4300 Processors: Input/Output Equipment Installation Manual—Physical
Planning
Page Printer Formatting Aid/370 User’s Guide and Reference
IBM Print Services Facility/VSE: System Programming Guide
IBM Print Service Facility/MVS Program Directory
S544-3700
S544-3665
G544-3668
G544-3805
S544-3673
S544-3666
SA22-7085
GA22-7000
IBM Print Service Facility/VSE Program Directory
IBM Print Service Facility/MVS: Application Programming Guide
IBM Print Service Facility/VSE: Application Programming Guide
IBM System/370 Enterprise Systems Architecture Principles of Operation
IBM System/370 Principles of Operation
Copyright IBM Corp. 1994, 1996
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Order
Document Title
Number
IBM System/370, 30xx, 4300, and 9370 Processors Bibliography
IBM 9370 System Installation Physical Planning
Application System/400 Printer Device Programming
IBM Cabling System Interface Technical Specification
IBM Local Area Network Technical Reference
IBM Token-Ring Area Network Architecture Reference
IBM Network Problem Determination Application Action Guide
IBM System Network Architecture SDLC Protocols
GC20-0001
GA24-4031
SC31-3713
GA27-3773
SC30-3383
SC30-3374
SC34-2113
SC19-5234
SC19-5237
Note: * = To order this document, call 1-800-388-7080.
74 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
binder holes. A series of holes or slots punched at set
intervals that allows the form to be inserted in a
loose-leaf or ring binder.
Glossary
The following terms are defined as they are used in
3130 documentation. If you do not find the term you
need, refer to the index or to the IBM Dictionary of
Computing, ZC20-1699.
bond (paper). Paper formulated with at least 80%
wood pulp. Bond-paper forms work best in the IBM
3130.
A
C
adhesive label. Special-application material; typically
consists of paper labels coated on one side with an
adhesive mixture temporarily affixed to backing material.
See also carrier.
calender. A process to make paper smooth or glossy
by passing it through a series of metal rollers during the
last steps of a paper-making machine.
calender cut. Slits, glazed lines, or discolored lines
across the paper caused when wrinkles pass through
the calender rollers.
Advanced Function Image and Graphics. This
allows the 3130 to directly process IO1 subset of the
IO-image command set and GR1 subset of the graphics
command set data streams.
caliper. The thickness of forms. This is usually
expressed in thousandths of an inch.
Advanced Function Presentation (AFP). The ability
of programs to use the all-points-addressable concept
to print text and images with a printer.
carrier. The backing material for labels. Labels
consist of the printable material, the adhesive, and the
carrier.
all-points addressability. The capability to address,
reference, and position text, overlays, and images at
any defined point on the printable area of a page.
chad. (1) The material separated from a data medium
when punching a hole. (2) The residue separated from
the carrier holes in continuous forms.
application. The use to which an information
processing system is put; for example, a payroll
application, an airline reservation application, a network
application.
channel. (1) A path along which signals can be sent
(for example, data channel, output channel). (2) In the
3130 printer environment, the communication
attachment.
application program. A program written for or by a
user that applies to the user's work, such as a program
that does inventory control or payroll.
character. A letter, number, punctuation mark, or
special graphic used for the production of text.
application programmer. A person who develops
application programs. Contrast with system
programmer.
character set. (1) A finite set of different characters
that is complete for a given purpose; for example, the
character set in ISO Standard 646, “7-bit Coded
Character Set of Information Processing Interchange.”
(2) A group of characters used for a specific reason; for
example, the set of characters a printer can print.
B
bar code. A code representing characters by sets of
parallel bars of varying thickness and separation that
are read optically by transverse scanning.
coated paper. Paper that has had a surface coating
applied to produce smoothness.
code page. A font library member that associates
code points and character identifiers.
Bar Code Object Content Architecture (BCOCA). An
IPDS command set that provides data control
information to print bar-code information on a page,
page segment, or overlay.
coded font. A set of graphic characters to which code
points from a code page and character-representations
font have been assigned. A coded font may be stored
in a library for later use, or used immediately as a
collection of data that specifies the character pattern of
zero or more graphic characters. A coded font
associates the graphic characters with code points, and
provides some of the control information the printer
needs to place the character patterns on a page.
basis weight. The weight in pounds of a ream (500
sheets) of paper cut to a given standard size for that
grade; for example, 25 x 38 inches for book papers,
17 x 22 inches for bond papers, and other sizes for
other grades.
Bibliography 75
Download from Www.Somanuals.com. All Manuals Search And Download.
Coded fonts are typically used where typographic
quality is required.
copy modification. The process of adding, deleting,
or replacing data on selected copies of certain sheets of
paper.
code point. An element of a code page or a site in a
code table to which a character can be assigned.
copy separation. The mechanism for distinguishing
consecutive copies of a single data set. In the stacker,
it consists of offset stacking.
configuration. (1) The arrangement of a computer
system or network as defined by the nature, the
number, and the chief characteristics of its functional
units. More specifically, the term configuration may
refer to a hardware configuration or a software
configuration. (2) The devices and programs that make
up a system, subsystem, or network.
cure. The process of drying ink sufficiently for
minimum transfer of the ink to any parts of the printer it
contacts.
customer engineer. See service representative
cut. The severed part of a perforation. Cuts are
configure. The procedure used to customize the 3130
separated by ties. See also perforation.
to a specific operating and communication environment.
cutout. A part of the form that has been eliminated or
perforated for subsequent removal; for example, corner
cuts and binder holes.
constant data. Data that does not change; for
example, the company letterhead and standard text in
form letters, or the headings and boxes on a preprinted
form. Contrast with variable data.
D
constant spaced font. A font in which the graphic
characters are contained in character cells of uniform
size. The distance between reference points of
adjacent graphic characters is constant in the in-line
progression. The white spaces between graphic
characters may vary. Synonymous with fixed-space
font. Contrast with proportionally-spaced font.
developed image. The image that has been exposed
onto the photoconductor and covered with toner by the
developer.
developer. The unit in the process assembly that
supplies a flow of developer mix (toner) over the
photoconductor to develop the electrostatic image.
control storage. In the 3130, a portion of storage that
contains microcode and other data.
diagnostic. Pertaining to the detection and isolation of
errors in programs and faults in equipment.
control unit (CU). (1) A device that controls input and
output operations at one or more devices. (2) In the
3130, the electronics and code that control the
diagnostic mode. The operational mode in which the
printer can check itself in case of a malfunction. When
the 3130 is in diagnostic mode, it is not accepting
information from the attached controlling computer
system. In the 3130, only service representatives can
use diagnostic mode. Contrast with print mode and test
mode.
printhead and the attachment to the host processor.
controlling computer. The processing unit to which
the 3130 is connected through a communication
attachment.
controlling computer system. The data-processing
system to which a network is connected and with which
the system can communicate.
direct attach. The environment in which an application
program directly allocates the 3130 printer.
disabled mechanism. If necessary, the operator can
disable some printer functions to continue operation
until the problem can be corrected. In the 3130, the
mechanisms that can be disabled are the top paper
supply, the bottom paper supply, the duplex
corner cut. In a form, a cut or opening of any size
containing one or more right angles.
corona. A small diameter wire (or wires, depending on
the function) to which a high voltage is applied, causing
ionization of the air. The ionization creates an electrical
charge to perform various functions during the printing
process.
mechanism, and the offset-stacker mechanism.
diskette. A flexible magnetic disk enclosed in a
protective container.
copy group. One or more copies of a sheet of paper.
Each may have modifications applied; for example,
overlays and text suppression.
diskette-storage device. A direct-access-storage
device that uses diskettes as the storage medium.
76 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Document Composition Facility (DCF). An IBM
licensed program that provides text formatting for the
3130.
error-recovery procedure. Procedures designed to
help isolate and, where possible, to recover from errors
in equipment. The procedures are often used in
conjunction with programs that record the statistics of
machine malfunctions.
double-byte character set. A type of character set
required to print unique characters, such as Japanese
Kanji.
exception. (1) An invalid or unsupported data-stream
construction. (2) In IPDS, a condition requiring host
notification or requiring the host to resend data.
double-byte coded font. A font in which the
characters are defined by two bytes; the first defines a
coded-font section, the second defines a code point.
Contrast with single-byte coded font.
F
font. (1) A family or assortment of characters of a
given size and style; for example, 9-point Bodoni
modern. A font has a unique name and may have a
registry number. (2) A font is data used to create an
image of each graphic character; for example, a raster
pattern.
double-byte font. See double-byte coded font.
drum count. The number of revolutions of the drum.
dry ink. The material that forms the image on the
paper. Synonymous with toner.
duplex printing. Printing on both sides of a sheet of
paper. Synonym for two-sided printing. Contrast with
simplex printing.
Font Library Service Facility (FLSF). A licensed
program that provides a way to make changes to a font
while retaining its correct format, as defined by the
architecture and as required by Print Services Facility.
E
font section. A subdivision of a double-byte font
character set. The section consists of a maximum of
256 characters.
electronic form. See electronic overlay.
electronic overlay. (1) A collection of constant data
that is electronically composed in the host system and
may be combined with variable data on a sheet during
printing. (2) The library member that contains the
definition of the electronic overlay. See overlay.
form definition (FORMDEF). In Print Services Facility
(PSF), a resource object that defines the characteristics
of the form, which include: overlays to be used, text
suppression, position of page data on the form, and
number and modifications of a page.
electrophotographic process. The creation of an
image on forms by uniformly charging the
photoconductor, creating an electrostatic image on the
photoconductor, attracting negatively charged toner to
the discharged areas of the photoconductor, and
transferring and fusing the toner to forms.
format. (1) The arrangement or layout of data on a
data medium. (2) The size, style, type of page,
margins, printing requirements, and so on, of a printed
page.
forms. The material on which output data is printed,
such as paper or adhesive labels. See electronic
overlay and preprinted form.
electrostatic image. The invisible image consisting of
discharged areas of the photoconductor as a result of
exposure from digital data.
forms path. The entire route that forms travel during
processing. The forms path usually begins where the
forms are loaded and ends at the stacker. Synonym for
paper path.
emboss. To press and raise the surface of paper into
a design. Embossed paper appears thicker than
non-embossed paper, can increase printer wear, and
can degrade print quality.
forms overlay. In the 3130, that function of the printer
that allows customer-prepared data to be printed with
variable-page data.
Enhanced N_UP Printing. To divide a sheet into a
maximum of 8 partitions, anywhere on the sheet. See
also N_UP Printing.
fuse. To use heat and pressure to blend toner onto
forms to make a permanent bond.
error log. (1) A data set or file in a product or system
where error information is stored for later access. (2) A
record of machine checks, device errors, and volume
statistical data.
fuser. The assembly that bonds the toned image to
the paper using heat and pressure.
Bibliography 77
Download from Www.Somanuals.com. All Manuals Search And Download.
switching the printer between duplex and simplex
modes or upper and lower paper supplies. The term
impression is interchangeable with image.
G
graphic. A symbol produced by a process such as
handwriting, drawing, or printing. See also vector
graphics.
initial machine load (IML). A procedure that prepares
the 3130 for use.
graphic character. A character that is normally
represented by a graphic, independent of code points or
fonts. A graphic character is often in the form of a
spatial arrangement of adjacent or connected strokes;
for example, a letter or digit.
installation. (1) In system development, preparing
and placing a functional unit in position for use. (2) A
particular computing system, including the work it does
and the people who manage it, operate it, apply it to
problems, service it, and use the results it produces.
Graphic Object Content Architecture (GOCA). An
IPDS command set that provides data control
information for printing graphics on a page, page
segment, or overlay.
installation verification procedure. A procedure
distributed with IBM licensed programs that tests the
newly installed IBM programs to verify that the basic
facilities of the programs are functioning correctly.
Graphical Data Display Manager (GDDM). An IBM
licensed program that allows pictures to be defined and
displayed through function routines.
intelligent printer data stream (IPDS). An architected
host-to-printer data stream that contains both data and
controls defining how the data is to be presented.
Generally, this information contains basic formatting,
error recovery, and character data.
H
interface. A shared boundary. An interface might be a
hardware component to link two devices or it might be a
portion of storage or registers accessed by two or more
computer programs.
host system. (1) The primary or controlling computer
in a multiple-computer installation. (2) A computer
used to prepare programs for use on another computer
or on another data-processing system; for example, a
computer used to compile, link edit, or test programs to
be used on another system.
interlocked mode. Prevents a machine or device from
initiating further operations until an operation in process
is completed.
I
IPX. Internetwork Packet eXchange. A Novell, Inc.
implementation of the XNS communication protocol that
transports data packets between network devices.
Delivery of the data packets is not guaranteed.
Contrast with SPX.
ideographic. Pertaining to 2-byte characters
consisting of pictograms, symbolic characters, and other
types of symbols.
image. (1) A string of picture elements organized in
scan lines to represent the contrasting portions of a
picture. (2) A likeness or imitation of an object. (3) In
this printer, an image comprises a string of pels
organized in scan lines to represent the contrasting
portions of a picture. The image may consist of any
data stored as a raster pattern. The term image is
interchangeable with impression and is printed on one
side of a sheet of paper.
ISO sizes. Pertaining to a set of paper sizes selected
from those standardized by the International
Organization for Standardization (ISO) for use in data
processing.
J
jam. In a printer, a condition where forms have
become blocked or wedged in the forms path so the
printer cannot operate.
Image Object Content Architecture (IOCA). An IPDS
command set to print image data on a page, page
segment, or overlay.
JIS. Japanese Industry Standards. Used in reference
to paper standards for size.
impact printer. A printer in which printing is the result
of mechanical impacts. Contrast with non-impact
printer.
job separation. (1) The hardware mechanism that
uses the mark form sequence to distinguish jobs, which
are consecutively stacked in the output stacker. (2) In
the 3130, job offset stacking is used to indicate job
termination. See also offset stacking.
impression. An implied or physical page. Used when
calculating the reduction of printer output caused by
78 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
K
N
Kanji. A graphic character set consisting of symbols
used in Japanese ideogram alphabets. Each character
requires two bytes of data (double-byte characters).
NetWare. A network operating system developed by
Novell, Inc. NetWare runs on a server and provides
several functions to the network and the applications
running on it, including print spooling, file serving, and
interprocess communications.
L
non-impact printer. A printer in which printing is not
the result of mechanical impacts. Contrast with impact
printer.
landscape orientation. Text and images that are
printed parallel to the longer side of the forms. Contrast
with portrait orientation.
N_Up Printing. In Basic N_UP, the ability to print
more than one logical page on a single side by using a
control in the form definition. See also Enhanced
N_UP.
laser (light amplification by stimulated emission of
radiation). A device that emits a beam of coherent
light.
latent image. In a printer, the invisible image that
exists in the sensitized material after exposure but
before development.
O
offline. Pertaining to the operation of a functional unit
when not under the direct control of a computer.
Contrast with online.
layout plan. A list of requirements, such as electrical
and space, that must be considered before installing the
IBM 3130 Advanced Function Printer.
offset paper. A grade of paper to which sizing is
added to resist moisture and surface during printing by
ink presses.
library. A collection of related files. For example, one
line of an invoice may form an item, a complete invoice
may form a file, and the collection of inventory control
files may form a library. The libraries used by an
organization are known as the data bank.
offset stacking. The jogged stacking of output media
in the output stacker so that jobs protrude from the
balance of the stack to give physical identification. See
also job separation.
licensed program. A separately priced program that
bears an IBM copyright and is offered to customers
under the terms and conditions of the Agreement for
IBM Licensed Programs.
online. Pertaining to the operation of a functional unit
when under the direct control of a computer. Contrast
with offline.
line printer. A printer that prints a line of characters as
a unit. Contrast with page printer.
operating environment. The physical environment; for
example, temperature, humidity, layout, or power
requirements.
logical page. The print on the page, such as
composed text, graphics, and fonts within defined
margins. Contrast with physical page.
operating requirements. A list of requirements, such
as environmental, electrical, and space, that must be
satisfied before the 3130 Advanced Function Printer can
be installed.
logo. An identifying emblem, statement, or motto of a
company.
optical character recognition (OCR). Character
recognition that uses optical means to identify graphic
characters.
M
memory. All of the addressable storage space in a
processing unit and other internal storage that is used
to execute instructions. Main storage.
orientation. The number of degrees an object is
rotated relative to a reference; for example, the
orientation of an overlay relative to the page point of
origin. See also text orientation.
microcode. In the 3130, refers to the
microprogramming stored on the microcode diskette.
Microcode is used by the control unit to manage the
printer and its functions.
outboard recorder (OBR). A feature that records
pertinent data on the system recorder file when an
unrecoverable I/O exception occurs.
Bibliography 79
Download from Www.Somanuals.com. All Manuals Search And Download.
output stacker. The part of the 3130 where the
printed sheets are collected.
begins where the forms are loaded and ends at the
stacker. Because not all forms are paper, the term
forms path is preferred.
overlay. (1) A collection of predefined data, such as
lines, shading, text, boxes, or logos, that can be
combined with variable data on a sheet while printing.
(2) The library member that contains the definition of an
overlay. See also electronic overlay and forms overlay.
parameter. A variable that is given a constant value
for a specified application and that may denote the
application.
pattern storage. In the 3130, a part of storage that
contains the fonts and images used for printing the
character data, overlays, and segments contained in the
page buffer.
Overlay Generation Language (OGL). The licensed
program that is used to create electronic overlays that
are included in the IPDS data.
overrun condition. Loss of data because a receiving
device is unable to accept data at the rate it is
transmitted.
partition. In Basic N_Up printing, the division of the
medium presentation space into a specified number of
equal-sized areas in a manner determined by the
current physical medium.
overstrike. The merging of two or more graphic
characters in the same position on a sheet of paper.
PC drum. A hollow cylinder that is covered with
photoconductive material.
P
pel (picture element). (1) An element of a raster
pattern; a point where a toned area on the
photoconductor may appear. (2) On an
all-points-addressable output medium, each pel is an
addressable unit. On a row-column addressable output
medium, the only pel addressable is the beginning of a
character cell.
page. A collection of information bound by the
beginning page control and its associated end control.
A page of printing is one side of a sheet of paper or
form. See also logical page and physical page.
page-buffer storage. Writable control storage in which
data to be printed is stored. The data is stored one line
at time until a page is complete and ready to print.
photoconductor. The material that is wrapped about
the drum. The medium for transferring images to
paper.
page definition (PAGEDEF). A statement that
specifies attributes of a logical page, such as the width
of its margins and the orientation of text.
physical page. The form on which the printer is
printing, such as an 8-1/2 x 11-inch sheet of paper.
Contrast with logical page.
page printer. A device that prints one page at a time
(for example, xerographic printer, cathode-ray-tube
printer, film printer). Contrast with line printer.
physical planner. The person in an organization who
plans the environmental, electrical, and space
requirements for your facility.
page-printer data stream. A data stream that enables
a printer to format a complete page at one time,
including text, images, and page segments. It is
characterized by a composed-page data-stream format.
pica. A unit of about 1/6 inch used to measure
typographical material.
pitch. A unit of measurement for the width of a printed
character. It identifies the number of graphic characters
per inch; for example, 10-pitch has ten graphic
characters per inch. Uniformly spaced fonts are
measured in pitches. Contrast with point.
Page Printer Formatting Aid (PPFA). A licensed
program that creates form definitions (FORMDEFs) and
page definitions (PAGEDEFs).
page segment. (1) An object that can include text and
images and that can be printed on any addressable
point on a page or electronic overlay. It assumes the
environment of the object in which it is included.
(2) The library member which contains the definition of
a page segment.
planning coordinator. The person in your
organization who is responsible for coordinating all the
planning and installation activities for the 3130.
point. A unit of measurement for describing type sizes.
There are 12 points to a pica, about 72 points to an
inch.
pallet. A portable platform for handling, storing, or
moving materials.
point of origin. The location of the first print position
on a logical page. The point of origin is usually stated
in terms of X and Y coordinates. The point of origin
paper path. The entire route that forms travel while
they are being processed. The paper path usually
80 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
used by a printer can be affected by factors such as
printable area and forms orientation.
R
random-access memory (RAM). A storage device
into which data is entered and from which data is
retrieved in a non-sequential matter.
portrait orientation. Pertaining to a display or hard
copy with greater height than width. Contrast with
landscape orientation.
raster. (1) In computer graphics, a predetermined
pattern of lines that provides uniform coverage of a
display space. (2) The coordinate grid that divides the
display area of a display device. (3) In the 3130 Printer
Subsystem, an on/off pattern of electrostatic images
produced by the laser print head under control of the
character generator.
preprinted form. A sheet of forms containing a
preprinted design of constant data with which variable
data can be combined. See also electronic overlay.
Presentation Text Object Content Architecture
(PTOCA). OPDS control sequences used to present
text information on a page, page segment, or overlay.
raster pattern. A series of picture elements (pels)
arranged in scan lines to form an image.
print-error marker (PEM). Small, black, rectangular
marks that indicate incorrectly placed data in the valid
printable area.
raster scan. A technique of generating or recording
the elements of an image by a line-by-line sweep
across the entire output medium.
Print Management Facility (PMF). An interactive
menu-driven program that can be used to create and
modify fonts and to define output formatting for data
printed on the IBM 3130 Advanced Function Printer.
registration. In printing, refers to the relative print
positions of images that are printed at different times.
For example, when you process preprinted forms, the
registration is good if the new image printed by the
3130 aligns correctly with the preprinted image. Print
that extends beyond box edges and text that overlaps
other text are examples of poor registration.
print mode. The operational mode in which
information is received from the attached controlling
computer system and printed output is produced.
Contrast with test mode and diagnostic mode.
print position. The physical positions of the
characters constituting a print line relative to the form.
resident font. Those font data sets that are resident
within the printer. They usually reside on the printer
diskette media (floppy or hard disk). These font sets
are usually commonly used fonts and by having them
resident reduces font load time. These fonts may also
be used during offline testing of the printer.
print quality. The quality of printed output relative to
existing standards and in comparison with jobs printed
earlier.
Print Service Facility (PSF). The access method that
supports the printing of text an images on a page.
resource. (1) People, equipment, or material used to
perform a task or a project. (2) Any facility of a
computing system or operating system required by a job
or task, including main storage, input/output devices,
processing units, data sets, and controller processing
programs; for example, page printers use resources
such as form definitions, page definitions, and fonts.
Print Services Access Facility (PSAF). A
menu-driven, print-parameter selection program for
page printers controlled by PSF.
print surface. The side of a form that receives the
printed image.
reverse heading. A heading where each character is
highlighted by reversing the color of the character with
its background; for example, changing a black character
on a white background to a white character on a black
background.
proportionally-spaced font. A font in which the
graphic characters are contained in character cells that
may vary with the size of each graphic character and
have varying character increments. This allows for
even spacing between printed characters and eliminates
excess white space around narrow characters.
Contrast with constant spaced font.
S
scanner. A device that examines OCR, graphics,
MICR, or bar-code patterns and generates electrical
signals corresponding to the pattern. It sends the
signals to a computing device for processing.
screen or screening. In document printing, a sheet of
material, usually film, carrying a regular pattern of small
Bibliography 81
Download from Www.Somanuals.com. All Manuals Search And Download.
dots. When printing, ink adheres only to the dots, and
many dots close together appear solid. This method
prints large areas of ink on paper but uses much less
ink than printing the same area with solid ink.
Synchronous Data Link Control (SDLC). For
managing synchronous, code-transparent, serial-by-bit,
information transfer over a link connection.
System Application Architecture (SAA). A set of
software interfaces, conventions, and protocols resident
in the host system for designing and developing
applications that are consistent across systems.
security paper. Specially formulated paper used for
negotiable documents, such as checks, which improves
the anti-fraud characteristics of the document.
sense byte. A byte that contains sense (exception)
information.
system programmer. A programmer who plans,
generates, maintains, extends, and controls the use of
an operating system, with the aim of improving overall
productivity of an installation. Contrast with application
programmer.
sense data. Sense information used to indicate the
causes of command-stream and device exceptions and
to direct the host program to the appropriate
exception-recovery actions.
system reference code (SRC). A code that contains
information, such as a failing field-replaceable unit, for a
customer engineer.
service representative. The person responsible for
installing and repairing the printer. Synonymous with
customer engineer.
System/370. An upward-compatible extension of the
IBM System/360. A large collection of computing
system devices that can be combined to produce a
wide range of computing systems that share many
characteristics, including a common machine language.
sheet. In reference to paper, a single sheet may be
printed on one side (simplex) or both sides (duplex).
simplex printing. Printing on one side of a sheet of
paper. Contrast with duplex printing.
T
single-byte coded font. A font in which the characters
are defined by one byte A single-byte coded font has
only one coded-font section. Contrast with double-byte
coded font.
task. A basic unit of work to be accomplished by a
device or an operator.
tensile strength. A measure of the force that the
paper forms can withstand without tearing.
sizing. A process where paper is treated to give it
resistance against penetration of liquids.
test mode. The operational mode in which the printer
can produce print samples, accept configuration
changes, and control traces. When the 3130 is in test
mode, it is not accepting information from the attached
controlling computer system. Contrast with print mode
and diagnostic mode.
special-purpose materials. Printable items other than
blank forms; for example, adhesive labels and
preprinted forms.
SPX. Sequenced Packet eXchange. A Novell, Inc.
communication protocol that monitors network
transmissions to ensure successful delivery of data
packets to the destination. Contrast with IPX.
text orientation. The position of text as a combination
of print direction and baseline direction.
throughput. Amount of work performed by a printer or
computer over a period of time, for example, number of
jobs per day.
SRC. See system reference code.
stacker. A device used to hold paper or other media;
usually used to refer to the output device of a printer.
toner. The material that forms the image on the paper.
stack lean. A measurable slope from the vertical of a
stack of forms. Excessive stack lean can cause failures
when feeding forms.
Synonymous with dry ink.
trace. (1) A record of the running of a computer
program. It exhibits the sequences in which the
instructions were executed. (2) To record a series of
events as they occur. (3) In the 3130, a customer
engineer and customer analysis procedure.
storage. (1) The retention of data in a storage device.
(2) In word processing, a unit into which recorded text
can be entered, in which it can be retained and
processed, and from which it can be retrieved. (3) A
device, or part of a device, that can retain data.
two-sided printing. Printing on both sides of a sheet
of paper. Synonymous with duplex printing. Contrast
with simplex printing.
82 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
void. A missing part of the printed character.
V
variable data. The data that can vary; for example,
the names and addresses in form letters. Contrast with
constant data.
vector graphics. Computer graphics in which display
images are generated from display commands and
coordinate data. Contrast with raster pattern.
Bibliography 83
Download from Www.Somanuals.com. All Manuals Search And Download.
IPDS
ISO
Intelligent Printer Data Stream.
Acronyms and Abbreviations
This list explains the acronyms and abbreviations used
International Organization for
Standardization.
in this documents,
and in the other documents that are part of the 3130
documentation library.
LAN
LF
Local Area Network.
Load Font command.
ABIC
AEA
Adoptive Bi-Level Image Compression.
Alternate Exception Action.
LU
Logical Unit.
MB
Megabyte (1MB=1 048 576 bytes).
Magnetic Ink Character Recognition.
Missing-Interrupt Handler.
AFIG
AFP
Advanced Function Image and Graphics.
Advanced Function Printing.
MICR
MIH
MMR
AFPDS
AFPF
APA
Advanced Function Printing Data Stream.
Advanced Function Print Finishing.
All-Points Addressable.
Modified-Modified READ 2 dimensional
image.
MO:DCA
MR
Mixed Object Document Content
Architecture.
ARQ
Active Record Queue.
Modified READ; (READ=Relative
Element Address Designate)
2-dimensional image compression
algorithm. Also referred to as CCITT
Group 3.
ASHRAE
American Society of Heating,
Refrigeration, and Air Conditioning
Engineers.
BCOCA
CCITT
Bar Code Object Content Architecture.
MVS
NCP
Multiple Virtual Storage.
Network Control Program
Optical Character Recognition.
Overlay Generation Language.
Operating System
Comite Consultatif International
Telegraphique et Telephonique.
CPGID
CE
Code Page Identifier.
OCR
OGL
OS
Customer Engineer (IBM).
CEE
International Commission for Conformity
Certification of Electrical Equipment.
PAGEDEF
PC
Page Definition.
CSA
CU
Canadian Standards Association.
Control Unit.
Photoconductor.
PEL
Picture Element.
DASD
DCF
DPE
Direct Access Storage Device.
Document Composition Facility.
PEM
PMF
Print-Error Marker.
Print Management Facility.
Page Printer Formatting Aid.
Print Services Access Facility.
Print Services Facility.
Decompression Performance
Enhancement.
PPFA
PSAF
PSF
EBCDIC
Extended Binary-Coded Decimal
Interchange Code.
EC
Engineering Change.
RAM
RRL
Random Access Memory.
Request resource list.
EHC
Exception Handling Control command.
Enterprise System Architecture.
End Select Medium Modification.
Font Library Service Facility.
Font Global Identifier.
ESA
SAA
System Application Architecture.
Synchronous Data Link Control.
Select Medium Modification.
System Network Architecture.
System Services Control Point.
ESMM
FLSF
FGID
FORMDEF
GCSGID
GDDM
HAID
IHF
SDLC
SMM
SNA
Form Definition.
SSCP
TCP/IP
Graphic Character Set Global Identifier.
Graphical Data Display Manager.
Host-Assigned ID.
Transmission Control Protocol/Internet
Protocol.
UL
Underwriter’s Laboratory.
Virtual Storage Extended.
Extended Architecture.
VSE
XA
Image Handling Facility.
IML
Initial Microcode Load.
XID
Exchange Station Identification.
84 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
checklists and work sheets (continued)
twinaxial attachment 27
cleaner unit 29
Numerics
4028 Compatibility Resident Font Set 42
clearances, service 21
common features
Compatibility Resident Font Set, 4028 42
configuration
3
A
abbreviations 84
acronyms 84
Ethernet TCP/IP attachment 27
of the printer 25
SNA SDLC attachment 27
SNA Token-Ring attachment 28
twinaxial attachment 27
adhesive labels 32
Advanced Function Image and Graphics
airflow 19
altitude 19
applications
7
work sheet 25
converting to 3130 15
converting applications to the 3130 15
Coordinated Font Set 44
Core Interchange Resident Scalable Font Set 37
current, input 20
environment
4
AS/400 Bolding Function 50
ASHRAE 19
attachment
Ethernet TCP/IP 27
hardware requirements 69
SNA SDLC 27
SNA Token-Ring 28
twinaxial 27
D
data security
6
DBCS Resident Raster Font Set 45
default font 49
developer mix 29
audible alarm
5
authorization levels
6
dimensions 21
auto eject
auto load
6
8
E
electrical
B
power requirements 20
requirements 20
safety 20
bar-code
edge tolerance 14
positioning and size 17
Enhanced N_Up Printing 62
environment
application
requirements 19
environments 4, 59
error log
Basic N_Up and Enhanced N_Up Printing: 62
Basic N_Up Printing 62
basis weight
bibliography 73
Bolding Function 50
bolding of characters 17
4
8
6
Ethernet TCP/IP attachment 27
C
F
cables
features
locations 21
power 20
Advanced Function Image and Graphics
7
common
operational
optional
3
cassettes
characteristics of the 3130
checklists and work sheets
3
5
—
8
1
3
paper cassettes 33
fire safety 20
fonts
Ethernet TCP/IP attachment 27
implementation plan 10
installation planning worksheet 23
SNA SDLC attachment 27
4028 Compatibility Resident Code Page Set 44
4028 Compatibility Resident Font Set 42
AS/400 Bolding Function 50
SNA Token-Ring attachment 28
Copyright IBM Corp. 1994, 1996
85
Download from Www.Somanuals.com. All Manuals Search And Download.
fonts (continued)
layout considerations 21
levels, sound 20
Lexmark International 29
line-printer data conversion 15
DBCS Resident Raster Font Set 45
default 49
GCSGID Subsets 45
GCSGID Subsets for IBM Core Interchange
Fonts 39
IBM Coordinated Font Set 44
IBM Core Interchange Resident Code Page Set 39
IBM Core Interchange Resident Scalable Font
Set 37
M
measurements, clearance 21
Microsoft LAN Manager 61
models
2
migration considerations 15
—
supported 37 52
forms
basis weight
requirements
N
N_Up Printing 62
noise levels 20
8
8
sizes and types used
8
frequency, nominal 20
O
—
1
functional overview
fuser unit 29
8
operating requirements
attachment hardware 69
electrical 20
environmental 19
space 21
G
Graphic Image Content Architecture objects 15
operational features
options, printer
ordering supplies 29
5
graphics performance
7
3
OS/2 LAN Manager 61
OS/400 printer transforms 64
H
handling paper
heat
8
output trays
3
output, heat 19
overlay generation language (OGL) 17
dissipation 19
output 19
—
1
overview
8
host environments 4, 59
humidity 19
P
paper
I
cassettes 33
handling
input trays
sizes 8, 30, 31
storage 36
IBM Coordinated Font Set 44
8
IBM Core Interchange Resident Scalable Font Set 37
IM images 15
Image Object Content Architecture images 15
8
images
7
weight ranges 8, 30
performance
implementation plan 10
input trays
installation
3
factors affecting
7
image and graphics
photoconductor belt 29
physical layout 21
plugs 71
point of origin 14
power
7
licensed programs 14
planning worksheet 23
requirements 22
Interchange Resident Scalable Font Set, IBM
CORE 37
consumption 20
dissipation 20
input 20
L
labels 32
LAN Manager (Microsoft) 61
LAN Server (OS/2) 61
large print function 17
voltage 20
pre-installation tasks 22
print
density
7
86 3130 Advanced Function Printer: Introduction and Planning Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
print (continued)
material
supplies 29
printer
space requirements 21
special-purpose materials
8
stackers
storage
3
cleaner unit 29
common features
configuration 25
developer mix 29
dimensions 21
fuser unit 29
host environments 4, 59
operational features
paper cassettes 33
forms 36
paper 36
supplies 36
3
supplies
ordering 29
paper cassettes 33
special-purpose materials
storage 36
8
5
supported environments 4, 59
photoconductor belt 29
supplies 29
toner cartridge 29
T
temperature 19
transfer belt unit 29
printer transforms for OS/400 64
threading, automatic
8
token-ring SNA attachment 28
toner cartridge 29
—
1
product summary
8
publications
x
traces
6
training 11
R
transfer belt unit 29
transforms, OS/400 64
twinaxial attachment 27
receptacles 71
related publications
x
relative humidity, permitted values 19
requirements
V
Advanced Function Presentation (AFP) licensed
programs 14
ventilation 19
verifying licensed programs 14
voltage
airflow 19
altitude 19
attachment hardware 69
electrical 20
environmental 19
humidity 19
input current 20
nominal 20
requirements 20
installation 22
W
paper
8
weight 21
sound levels 20
space 21
special-purpose materials
temperature 19
ventilation 19
wiring information 20
work sheets and checklists
implementation plan 10
installation planning worksheet 23
8
Resident Raster Font Set, DBCS 45
Resident Scalable Font Set, IBM CORE
Interchange 37
S
safety 20
Scalable Font Set, IBM CORE Interchange 37
security, data
6
service clearances 21
SNA SDLC attachment 27
SNA Token-Ring SNA attachment 28
sound levels 20
Index 87
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Readers' Comments — We'd Like to Hear from You
3130 Advanced Function Printer
Introduction and Planning Guide
Publication No. G544-3974-04
Use this form to provide comments about this publication, its organization, or subject matter. Understand
that IBM may use the information any way it believes appropriate, without incurring any obligation to you.
Your comments will be sent to the author's department for the appropriate action. Comments may be
written in your language.
Note: IBM publications are not stocked at the location to which this form is addressed. Direct requests
for publications or for assistance in using your IBM system, to your IBM representative or local IBM branch
office.
Yes
No
Ÿ Does the publication meet your needs?
Ÿ Did you find the information:
Accurate?
Easy to read and
understand?
Easy to retrieve?
Organized for convenient
use?
Legible?
Complete?
Well illustrated?
Written for your technical
level?
Ÿ Do you use this publication:
As an introduction to the
subject?
As a reference manual?
As an instructor in class?
As a student in class?
Ÿ What is your occupation?
Thank you for your input and cooperation.
Note: You may either send your comments by fax to 1-800-524-1519, or mail your comments. If mailed
in the U.S.A., no postage stamp is necessary. For residents outside the U.S.A., your local IBM office or
representative will forward your comments.
Comments:
Name
Address
Company or Organization
Phone No.
Download from Www.Somanuals.com. All Manuals Search And Download.
Cut or Fold
Along Line
Readers' Comments — We'd Like to Hear from You
G544-3974-04
IBM
Fold and Tape
Please do not staple
Fold and Tape
NO POSTAGE
NECESSARY
IF MAILED IN THE
UNITED STATES
BUSINESS REPLY MAIL
FIRST-CLASS MAIL PERMIT NO. 40 ARMONK, NEW YORK
POSTAGE WILL BE PAID BY ADDRESSEE
Information Development
The IBM Printing Systems Company
Department H7FE Building 003G
P O Box 1900
BOULDER CO 80301-9817
Fold and Tape
Please do not staple
Fold and Tape
Cut or Fold
Along Line
G544-3974-04
Download from Www.Somanuals.com. All Manuals Search And Download.
|