|
Multiprotocol
Ethernet/Fast Ethernet
Print Server
Hardware Users Guide
Information in this document is subject to change without notice. All rights reserved. All
brand names are registered trademarks of their respective companies.
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC Warning
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with this user’s guide, may cause harmful interference
to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
CE Mark Warning
This is a Class A product. In a domestic environment, this product may cause
radio interference in which case the user may be required to take adequate
measures.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Port Connectors...................................................................................................2
Network Cable Connector...................................................................................3
DC Power Connector ..........................................................................................3
LED Indicators....................................................................................................4
2 UNPACKING AND INSTALLATION.............................................5
Unpacking and Inspecting the Print Server............................................... 5
Installing the HyperNet Fastprint.............................................................. 5
Power On Self-Test.................................................................................... 6
Testing Your HyperNet Fastprint .............................................................. 7
Wall-Mounting the HyperNet Fastprint..................................................... 8
3 PRODUCT SPECIFICATIONS ....................................................10
Printer Connection .................................................................................. 10
Network Connection ................................................................................ 10
Network Protocols ................................................................................... 10
Management and Diagnostics ................................................................. 11
Environmental and Physical.................................................................... 11
4 PORT PINOUTS........................................................................11
Index
v
Download from Www.Somanuals.com. All Manuals Search And Download.
vi
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Print Server Features
HyperNet Fastprint print servers improve network printing services in three
ways:
♦ The HyperNet Fastprint picks up the workload of managing print file
traffic to its connected printers. This provides workload relief to your
file servers, and allows the file servers' full capacity to be used for file
access or other direct services to network users. On peer-to-peer
networks, workstations can print directly to the HyperNet Fastprint
without increasing the load of another workstation or server.
♦ The HyperNet Fastprint's parallel printer ports are IEEE 1284
compliant high-speed bidirectional ports, which can transmit to high-
speed laser printers much faster than a PC's parallel printer port.
High-speed laser printers connected to the HyperNet Fastprint's
parallel ports can be operated at full their capacity.
♦ Because the HyperNet Fastprint is very portable and inexpensive
compared to a PC-based print server, and because the HyperNet
Fastprint connects to your file servers through the network, printers
can be deployed to locations of maximum convenience to users.
The HyperNet Fastprint offers extraordinary flexibility, operating with all
major network operating systems and protocols:
Index
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows NT, Windows 95/98, Windows for Workgroups, Microsoft
LAN Manager, IBM LAN Server
♦ AppleTalk
MacOS EtherTalk
Windows-based setup and administration software, EtherP Admin, is supplied
with the HyperNet Fastprint, making configuration and management quick
and easy.
The HyperNet Fastprint also supports configuration and
management via the telnet protocol for networks without Windows-
compatible machines.
External Features
This section describes the externally visible features of the HyperNet
Fastprint print server.
Port Connectors
The HyperNet Fastprint’s three printer ports are located on its rear panel.
Two identical parallel ports are labeled LPT1 and LPT2; the single serial port
is labeled COM. These printer ports are independently configurable using the
EtherP Admin program or the print server’s telnet interface. (See the Print
Server Administration User’s Guide for information about configuring the
print server’s ports.)
2
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Cable Connector
The HyperNet Fastprint’s right side panel features an RJ-45 connector for
connection to 10Base-T Ethernet cabling or 100Base-TX Fast Ethernet
cabling (which should be Category 5 twisted-pair cable). The port supports
the NWay protocol, allowing the print server to automatically detect or
negotiate the transmission speed of the network.
DC Power Connector
The DC power input connector is located on the HyperNet Fastprint’s right
side panel and is labeled DC 12V.
Figure 1 -2 Print Server Right Side Panel
Index
3
Download from Www.Somanuals.com. All Manuals Search And Download.
♦ Power/Tx
◊ Steady or flashing green confirms that the HyperNet Fastprint is
powered on.
◊ The indicator blinks off briefly to indicate that the HyperNet
Fastprint is transmitting to the network.
♦ Link/Rx
◊ Steady or flashing green confirms that the HyperNet Fastprint has a
good connection to the Ethernet or Fast Ethernet network.
◊ The indicator blinks off briefly to indicate that the HyperNet
Fastprint is receiving from the network.
♦ LPT1, LPT2, COM
◊ These LED indicators light to show that the HyperNet Fastprint is
transferring print data through the appropriate parallel or serial
port.
These three indicators are also used by the print server’s power-on self
test (POST) to indicate any hardware failures.
4
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Server
Carefully remove all items from the package. In addition to this Hardware
User’s Guide, be certain that you have:
♦ One HyperNet Fastprint print server
♦ One DC power adapter suitable for your country’s electric power
♦ Two EtherP Admin software diskettes
♦ One Print Server Administration User’s Guide
♦ Fasteners for optional wall-mounting
If any item is missing, or if you find any damage or mismatch, promptly
contact your dealer for assistance.
Installing the HyperNet Fastprint
WARNING: Configuration problems may result if the HyperNet
Fastprint is powered up without first establishing its
network connection. Follow this procedure to
avoid complications at the configuration stage.
Index
5
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Connect the HyperNet Fastprint to the network, using the RJ-45
(10Base-T/100Base-TX) connector on the print server’s side panel.
5. While each printer is powered off, connect its tested and confirmed
port to a like printer port of the HyperNet Fastprint. If you are
connecting fewer than three printers, then keep in mind that parallel-
port connections are preferred for high-performance printers.
6. Switch on each connected printer.
7. Plug the DC power adapter’s DC output plug into the DC 12V power
socket on the side panel of the HyperNet Fastprint.
8. Plug the power adapter into an electric service outlet. This will supply
power to the HyperNet Fastprint, as it has no external power switch.
The Power/Tx LED on the HyperNet Fastprint’s front panel should
light steady green, and the HyperNet Fastprint’s self-test will proceed.
Power On Self-Test
When the HyperNet Fastprint is powered on, it automatically performs a self-
test on each of its major components. The final result of the self-test is
signaled by the state of the LPT1, LPT2, and COM LED indicators following
the self-test. Preliminary to the actual component tests, the three LED
indicators are tested to confirm their steady and flashing operation.
Immediately after power-up, all five of the LED’s should show steady green
for several seconds. Then the LPT1, LPT2, and COM LEDs should flash on
6
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
contact your dealer for correction of the faulty unit.
LED Name
Faulty
Component
LPT1
LPT2
COM
off
off
on/steady
COM error
Flash ID error
off
off
off
flashing
off
on/steady
on/steady
on/steady
flashing
flashing
flashing
off
LPT2 error
off
on/steady
flashing
off
LAN Controller error
LAN Memory error
Parallel-2 Controller error
EEPROM error
off
off
off
on/steady
flashing
off
off
Flash Protected
on/steady
on/steady
on/steady
on/steady
flashing
flashing
flashing
LPT1 error
off
on/steady
flashing
off
Timer INT error
off
LAN IO Base error
RAM error
on/steady
off
off
Parallel-1 Controller error
Flash erase/program error
Need to reload firmware
flashing
flashing
off
flashing
Testing Your HyperNet Fastprint
The EtherP Admin software includes a Print Test function for confirmation of
printer cable connections and functions. That operational test can be
Index
7
Download from Www.Somanuals.com. All Manuals Search And Download.
To mount the HyperNet Fastprint with the front panel facing up (and the
printer port connectors facing down), set the two mounting screws at the
lower-left and upper-right corners of a rectangle as shown below (actual size):
110 mm
5
4 / in
16
70 mm
3
2 / in
4
1
When setting the screws into the wall or partition, leave about 3 mm ( / in)
8
between the head of each screw and the wall surface. Then place the
HyperNet Fastprint so that the mounting sockets on the bottom of its case fit
over the two screws. Press the case gently toward the wall and slide the case
8
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Ports: Bi-directional 25-pin parallel ports × 2, 9-pin DTE serial port × 1
Parallel Port Bi-directional Communication: Hewlett-Packard PJL (Printer
Job Language) supported
Network Connection
Network Standards: IEEE 802.3 10Base-T Ethernet, IEEE 802.3u
100BASE-TX Fast Ethernet
Network Data Transfer Rate: 10/100Mbps
Network Connector: RJ-45 connector for 10Base-T or 100BASE-TX
unshielded twisted pair connection; NWay automatic speed negotiation
supported.
Network Protocols
Ethernet Frame Types: 802.2, 802.3, Ethernet II, SNAP (auto-switching)
Transport Protocols: IPX/SPX, TCP/IP, NetBEUI, AppleTalk/EtherTalk
TCP/IP Protocols Supported: BOOTP, SNMP, Telnet, TFTP, FTP, lpd
10
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Supply: External power supply providing 12VDC/ 500mA
Dimensions: 190mm × 116.8mm × 30.9mm
Weight: approx. 360g
Operating Temperature: 0 to 50°C
Storage Temperature: -10 to 50°C
Humidity: 10% to 90% non-condensing
Emissions: FCC Class A, CISPR 22 Class A, VCCI Class 1, AS/NZS
3548:1995 Class A
Safety: UL (UL 1950), CSA (CSA950), TUV/GS (EN60950)
B
Port Pinouts
This appendix shows the pinouts of the HyperNet Fastprint parallel and serial
printer ports.
Index
11
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
4
5
6
7
8
9
2
3
4
5
6
7
8
9
10
11
12
13
14
32
31
36
Data 1
Data 2
Data 3
Data 4
Data 5
Data 6
Data 7
Data 8
nAck
Bi-directional
Bi-directional
Bi-directional
Bi-directional
Bi-directional
Bi-directional
Bi-directional
Bi-directional
Printer
Printer
Printer
Printer
Host
10
11
12
13
14
15
16
17
18-25
Busy
PError
Select
nAutoFd
nFault
nInit
Printer
Host
Host
nSelectIn
Ground
16, 17, 19-30
Serial Port
The table below shows the pinout of the print server’s 9-pin RS-232 serial
port. The print server’s serial port is a DTE (Data Terminal Equipment) port,
and should be connected to a DCE (Data Communications Equipment) serial
port on your printer. Consult your printer’s documentation for detailed
information on how to connect the print server to your printer.
12
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
13
Download from Www.Somanuals.com. All Manuals Search And Download.
does not include service to repair damage resulting from accident, disaster, misuse, abuse or
non-Hypertec modification of the product.
Additional components installed by the dealer or end user are not covered by this warranty.
Apart from the above, no warranty is expressed or implied, including warranty of
merchantability or warranty of fitness for use for a particular purpose.
The liability of Hypertec is limited to the repair or replacement of the product with a
functionally equivalent or better product. Hypertec is not liable for any accidental, general,
special, exemplary or consequential damages resulting from any product failure, even if
Hypertec has been advised of the possibility of such damages.
Hypertec Limited
Units 1-3 Station Road
Hungerford, Berkshire RG17 0DY
Ph: +44 (0)1488 686844
Fax: +44 (0)1488 686845
Email:
14
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
LPT1 ........................................................... 3
LPT1 LED............................................... 5, 9
LPT2 ........................................................... 3
LPT2 LED............................................... 5, 9
network connectors..................................... 3
self-test........................................................ 8
telnet ........................................................... 2
wall mounting ........................................... 10
wall-mounting............................................. 6
Download from Www.Somanuals.com. All Manuals Search And Download.
|