Full-Auto Electric Washing Machine
Model: DWF-7589/8089
INSTRUCTION MANUAL
■First applying the Air Bubble Washing System in the world.
■Applying One-Touch Operation System.
■Realizing calm washing through the innovational low-noise
design.
■Before operating this washer, please read this instruction
completely. Thank you
The First Air Bubble Washing
System in the World
CONTENTS
Page
PARTS AND FEATURES.........................................................2
WASHER SAFETY...................................................................3
INSTALLATION INSTRUCTIONS...........................................4
ELECTRICAL REQUIREMENTS............................................5
INLET HOSE CONNECTION..................................................6
OPERATING YOUR WASHER...............................................7
THE FUNCTIONS OF THE CONTROL PANEL...................8
WASHING PROCEDURE AND COURSE SELECTION........9
GENERAL PROCEDURE FOR OPERATION....................11
CARING FOR YOUR WASHER...........................................12
HOW TO CLEAN THE FILTER............................................13
REMOVING STAINS.............................................................14
TROUBLE SHOOTING.........................................................15
SPECIFICATION...................................................................16
➣ Your washer is equipped with the
bubble generator that generates a
great deal of air bubble.
➣ The air bubbles knock the dirt out
of the clothes during wash and
they push up the heavy dirt to
remove it during rinse.
➣ Because the double washing
method using both air bubble &
water current is applied to this
washer, wash efficiency is excellent
in comparison with the original
washer system.
A NOTE TO YOU
Thank you for buying a DAEWOO appliance.
DAEWOO washers are easy to use, save time, and help you manage your home better.
This manual contains valuable information about how to operate and maintain your washer properly and safely.
Please read it carefully.
Download from Www.Somanuals.com. All Manuals Search And Download.
WASHER SAFETY
Save these instructions
Your safety is important to us.
To reduce the risk of fire, electrical shock, or injury when using your washer, follow
basic precautions including the following:
Read all instructions before using your washer
• Flammable fluids (dry-cleaning solvents,
kerosene, gasoline, etc.) should not be
used or stored in or near your washer.
Do not add flammable fluids to your wash
water.These substances give off vapors
that can create a fire hazard or explosion.
• Do not allow children to operate, play
with, or crawl on or inside your washer.
Supervise children closely when your
washer is used near them.
Please ...
• Have only a qualified person install, repair,
or replace parts on washer.
• Maintain washer properly.
• Protect washer from the weather and
keep it where the temperature will not fall
below freezing.
• Do not install the washer at a place of
extremely high humidity. It could cause an
Electrical shock or a short circuit.
• Connect washer to the correct outlet,
electrical supply, water supply, and drain.
• Ground washer properly.
• After starting a cycle, do not reach into
the spin basket unless all motion stops.
• Do not tamper with the controls.
Understanding your responsibilities
• Do not wash items that are soiled with vegetable or cooking oil.
These items may contain some oil after laundering.
Due to the remaining oil, the fabric may smoke or catch fire by itself.
• Do not use chlorine bleach and ammonia or acid (Such as vinegar or rust remover) in the
same wash. Hazardous fumes can form.
• Unplug power supply cord before attempting to service your washer.
• Do not wash fiberglass materials.
Small particles can stick to fabrics and cause skin irritation.
• Do not use hot water that temperature is over 50°C (120°F).
It can cause a deformation of plastic parts.
• Do not spray water on the control panel and back cover of the washer.
It can cause a fire or an electric shock.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
4
INSTALLATION INSTRUCTIONS
Location of washer
Check location where washer will be installed. Make sure you have everything
necessary for correct installation.
Proper installation is your responsibility.
•Do not place or store your washer below 0°C (32°F) to avoid any damage from freezing.
•Install the washer on the horizontal solid floor.
C
If the washer is installed on an unsuitable floor, it could
make considerable noise, vibrate and cause a malfunction.
If washer is not level, adjust the front leg(A) up or down for
horizontal setting.
•Earthed electrical outlet(B) is required with 20cm of
bottom back of washer cabinet.
B
•Hot and cold water faucets (C) must be within 1M of the
upper back of the washer cabinet and provide water
pressure 0.3kgf/cm 2-8kgf/cm 2 (2.94N/cm 2-78.4cm2).
A
UP
DOWN
Drain system
Never forget to install drain hose before operating your washer.
The packing box is opened, there are a drain hose, and a hose clamp in the washer.
Non-Pump Model
Pump Model
• Connect the drain hose to the drain outlet
at the back side of the washer, and fasten
it tightly with the clamp attached.
• Connect the drain hose to the drain outlet
at the back side of the washing machine,
and fasten it tightly with the clamp
supplied.
Drain Outlet
Hose clamp
Drain hose
Drain hose
Hose Clamp
NOTES
• The opening must not be obstructed by carpeting when the washing machine is
installed on a carpeted floor.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
`
5
Non-Pump Model
2In case of extending the
drain hose.
3Be careful that the end
of the drain hose is not
immersed in water.
1In case that it goes over
a door sill.
Don’t let the total length
exceed 3m.
Don’t let the height of
the drain hose exceed
20cm from the bottom
of washer.
3m
20Cm
Pump Model
Laundry tub drain system
Standpipe drain system
• Needs a 3cm minimum diameter
standpipe with minimum carry away
capacity of 30liters per minute.
• Top of tub must be at least 86cm
(34inches) high and no higher than 130cm
from bottom of washer (A)
• Top of tub must be at least 86cm
(34inches) high and no higher than 130cm
from bottom of washer (B)
A
B
ELECTRICAL REQUIREMENTS
electrical shock hazard:failure to follow these instructions could result in
death or serious injury.
WARNING
• Don’t earth to a gas pipe
• Electrical earth is required on this washer
• If it does not fit the outlet, have a proper outlet
installed by a qualified electrician.
• Don’t change the power supply cord plug.
• Check with a qualified electrician if you are not
sure the washer is properly earthed.
Recommended earthing method
For your personal safety, this washer must be earthed.
C
This washer is equipped with a power supply cord (A) having a
earthing plug (B). To minimize possible shock hazard, the cord must
be plugged into a mating earthing-type wall receptacle (C).
If a mating wall receptacle is not available, it is the personal
responsibility and obligation of the customer to have the proper
earthed wall receptacle installed by a qualified electrician.
B
A
5
Download from Www.Somanuals.com. All Manuals Search And Download.
6
INLET HOSE CONNECTION
Be careful not to confuse hot water inlet and cold water inlet.
In using only one water tap or in case of attached one water inlet valve, connect the
inlet hose to the cold water inlet valve.
For Ordinary Tap
1Pull down the collar of
the inlet hose to separate
it from the water tap
adapter.
2Loosen the four screws
properly in fitting into
water tap.
3Fit the water tap adapter
into the water tap tap
and tighten the four
screws evenly while
pushing up the adapter
so that the rubber
packing can stick to the
water tap tightly.
TAPE
4Remove the tape, and
screw connector B into
connect A tightly.
5Connect the inlet hose to
the water tap adapter by
puling down the collar of
the hose end.
6Connect the inlet hose
adapter of the hose to
the water inlet of the
washer by turning it
clockwise to be fixed
tightly.
Connector A
Connector B
• Please check the rubber
packing inside the inlet hose
adapter of the hose.
For Screw-Shaped Tap
1Connect the inlet hose to
the water tap by
2Connect the connector-
inlet supplied if
3Insert the inlet hose
adapter into the water
inlet of a washer and turn
it to be fixed.
screwing the connector
tightly.
necessary.
Connector
inlet
Rubber
Rubber
Packing
Connector
Packing
Connector
Hose
Hose
Connector
Connector
*Cheek the packing in the inlet
6
Download from Www.Somanuals.com. All Manuals Search And Download.
7
OPERATING YOUR WASHER
To obtain the best wahing results, you must operate your washer properly.
This section gives you this important information.
Preparing clothes for washing
• Close zippers, snaps, and hooks to avoid
snagging other items.
• Turn down cuffs and turn synthetic knits
out to avoid pilling.
Remove pins, buckles, and other hard
objects to avoid scratching the washer
interior.
• Tie strings and sashes so they will not
tangle.
• Treat spots and stains.
• Empty pockets and turn them inside out.
(see "Removing stains" on page14)
Sorting
• Separate heavily soiled items from, lightly soiled ones, even if they would normally be
washed together.
• Separate dark colors from light colors, colorfast items from non-colorfast item.
Loading
• Mix large and small items in each load.
Load evenly to maintain washer balance.
An off balance load can make the washer
vibrate during spin.
• Reduce wash time when using a small
load size setting. Loads with only a few
small items need less wash time.
• Drop items into washer loosely. Items
should move easily through wash water
for best cleaning and wrinkle-free results.
• Load washer properly and select correct
load size setting.
Overloading and selecting a setting too
small for the wash load can:
• Use a large load size setting to reduce
wrinkling with permanent press clothes
and some synthetic knits. These items
should have more room to move in the
water than heavy items (towels, jeans)
- cause poor cleaning
- increase wrinkling
- create excessive lint
- wear out items faster (because of pilling)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
`
8
THE FUNCTIONS OF THE CONTROL PANEL
WASH TEMP.
DETERGENT
HIGH
RINSE
FUZZY
BLANKET
ECONOMY
SUIT
REMAIN
HOT
POWER
MEDIUM
LOW
CONTROL
ONLY SPIN
COLD
WASH
SPIN
MIN.
RES.
START
HOLD
SMALL
SOAK
SPRAY RINSE
PROCESS
WASH
TEMP.
WATER
LEVEL
COURSE
RES.
POWER
• Press this switch to turn the power on or off.
• It can be used to choose water temperature to be supplied.
• As the button is pressed, water temperature will be repeated.
COLD ➝ COLD+HOT ➝ HOT
WASH
TEMP.
• In case of the single valve model, there is no wash temperature
selector function.
• It can be used to adjust amount of water according to the size of the
load to be washed.
• As the button is pressed, water level is selected by
WATER
LEVEL
MEDIUM ➝ HIGH ➝ SMALL ➝ LOW
RES
• It can be used to pre-engage time for wash.
• It is the button for the partial process or the combination of each
process (wash, rinse, spin) (See page 10)
PROCESS
• If you want to change wash time, rinse times, spin time, you must
press this button after selecting each process by the process button.
Also, this button can be used to spin only. (See page 10)
CONTROL
ONLY SPIN
• It can be used to select the full-automatic course.
COURSE
• As the button is pressed, course will be selected by following order:
FUZZY ➝ BLANKET➝ ECONOMY ➝ SUIT(WOOL) ➝ SOAK
• Operation and temporary stop is repeated as it is pressed.
• When you want to change course in operating;
press the "START/HOLD" button ➝ Select the course that you want to
START/
HOLD
change ➝ press the "START/HOLD" button again.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
`
9
WASHING PROCEDURE AND COURSE SELECTION
FULL AUTOMATIC COURSE
1. FUZZY COURSE (SENSOR);
• This selection is for general washing except extraordinary clothes.
• Artificial brain sensor selects properly the various kind of washing condition such as
washing time, rinse times, spin time and water level.
START
HOLD
POWER
2. BLANKET COURSE;
• This selection is effective for blanket, curtain, carpet, etc ...
• Do not wash general-electric blanket absolutely. (4kg’s limitation for one-time-wash)
Procedure to press the button;
adjust to water
level and water
temperature
adjust to
"BLANKET"
START
HOLD
COURSE
POWER
3. ECONOMY COURSE;
• This selection is useful to reduce water consumption and washing time for less dirty
clothes.
Procedure to press the button;
adjust to
"ECONOMY"
adjust to
water level and
water temperature
START
HOLD
COURSE
POWER
4. SUIT(WOOL) COURSE
• This selection is effective for suit clothes. (1.2kg s limitation for 1 time-wash)
• Do not put leather clothes, or chamois clothes into the washing tub for washing.
It may cause shrinkage or deformation to the clothes.
• Please use the neutral detergents only.
• The water temperature is fixed to COLD
• The water level LOW&SMALL is not selected.
adjust to
"SUIT(WOOL)"
Put the exclusive
START/
HOLD
COURSE
POWER
detergent DRYTEN
of 26g into the tub
for dilution with water.
After dissolving of
detergent, lamp
will buzzer will
sound.
Put the clothes into
the tub after the
buzzer sounds.
Close the lid and press the
S/H button once again.
START/
HOLD
5. SOAK COURSE;
• This selection is effective for blue-jean, climbing clothes, ruck sack, sports wear, etc...
• If you want to soak, press the course button to adjust to "SOAK" .
adjust to
"SOAK"
START
HOLD
adjust to
water level and
water temperature
COURSE
POWER
9
Download from Www.Somanuals.com. All Manuals Search And Download.
`
10
Reserved Washing
• Reservation can be made from 2 hours to 48hours.
example) Tomake reservation to complete washing in 8hours.
adjust to
"the Res"
close
the lid
START
HOLD
COURSE
RES
MIN
MIN
RES.
RES.
"--" SHALL BLINK
adjust to "8"
• Now the reservation is made.
PARTIAL PROCESS & COMBINATION
POWER
WASH TIME CONTROL
PROCESS
• As the control button is pressed, wash time will be repeated as
following;
CONTROL
ONLY SPIN
14 18
0
6
10min.
➝
➝
➝
➝
• If you don t want wash process, you must adjust wash time to 0 min.
RINSE TIMES CONTROL
• As the control button is pressed, Rinse times will be repeated as
following;
PROCESS
1) Pump Model 2 Rinse 3 Rinse 4 Rinse 0 Rinse 1 Rinse
➝
➝
➝
➝
2) Non-Pump Model 2 Rinse 3 Rinse 4 Rinse 1 Spray Rinse
➝
➝
➝
CONTROL
ONLY SPIN
2 Spray Rinse 3 Spray Rinse 4 Spray Rinse 0 Rinse Rinse
➝
➝
➝
➝
➝
• If you don t want Rinse process, you must adjust Rinse times to 0 times.
• If you select spray Rinse, the LED of spray Rinse is lighted
(NON-PUMP MODEL)
SPIN TIME CONTROL
PROCESS
• As the control button is pressed, spin time will repeated as following;
5
7
9
0
1 3min.
➝
➝
➝
➝
➝
CONTROL
ONLY SPIN
• If you don t want spin process, you must adjust spin time to 0 min.
START
HOLD
CONVINIENT OPERATION FOR SPIN ONLY
• If you want spin only, it is convinient to operate
CONTROL
ONLY SPIN
START
HOLD
POWER
the button as following.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
`
11
GENERAL PROCEDURE FOR OPERATION
1. Add measured detergent to the washer, (Follow manufacturer’s directions for safe use)
2. OPTIONAL STEP
If desired, add measured liquid chlorine bleach to the bleach inlet. use only liquid chlorine
in the bleach inlet
* Follow manufacturer’s direction for safe use.
NOTE
•
Do not let bleach splash, drip, or run down into washer
basket.
Undiluted bleach will damage any fabric it touches.
Do not use this dispenser to add powdered chlorine or
color safe bleach to your wash load. The dispenser is for
liquid chlorine bleach use only.
•
Bleach inlet
(Symbol)
3. OPTIONAL STEP
If desired, add measured liquid fabric softener to the softener inlet.
• Pour liquid fabric softener into the dispenser using the amount recommended on the
package. Avoid dripping or spilling any fabric softener on the load.
Softener inlet
(Symbol)
• The dispenser is for liquid fabric softener use only.
4. Close the washer lid (door)
5. Press the power button.
6. Select the cycle. The full automatic cycle has five settings; FUZZY, BLANKET, ECONOMY,
SUIT(WOOL), SOAK. (See page 9)
7. Press the START/HOLD button.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
`
12
CARING FOR YOUR WASHER
Proper care of your washer can extend its life. This section explains how to care for
your washer properly and safely.
Cleaning your washer
Exterior
Interior
Clean interior with 250ml of chlorine bleach
mixed with 500ml of detergent.
Run washer through a complete cycle.
Repeat process if necessary.
Wipe up detergent, bleach, and other spills
with a soft, damp cloth or sponge as they
occur. Occasionally wipe the outside of the
washer to keep it looking like new one.
Do not put sharp or metal object in your
washer, they can damage the finish. Check all pockets for
pins, clips, money, bolts, nuts, etc.
Do not lay these objects on your washer after emptying
pockets.
Winter storage or moving care
Install and store your washer where it will not freeze. Because some water may stay in the
hoses, freezing can damage your washer.
If storing or moving your washer during freezing weather, winterize it.
To winterize washer
• Turn off water faucet.
• Disconnect and drain water inlet hoses
• Run washer on a drain and spin setting
(see page 10) for 1 minute.
To use washer again
• Flush water pipes and hoses.
• Reconnect water inlet hoses.
• Turn on water faucet.
• Reconnect power supply cord.
• Unplug the power supply cord.
Non-use or vacation care
Operate your washer only when you are at home.
If will be on vacation or not using your washer for an extended period of time, you should:
• Unplug the power supply cord or turn off eletrical power to the washer.
• Turn off the water supply to the washer .
This helps avoid accidental flooding (due to a water pressure surge) while you are away.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
13
HOW TO CLEAN THE FILTER
Cleaning the Lint Filter
1Pull the Fiter frame up-
2Turn the lint filter inside
fout, wash to the lint of
with water
3Return the filter as it was,
and insert the filter frame
into the slot
ward.
Filter Frame
Lint Filter
Cleaning the water inlet filter
• Clean the filter when water leaks from, the water inlet.
1Pull the power
plug out before
cleaning it.
2Turn off the water
supply to the
washer and
3Pull the inlet filter
out.
4Remove the dirt
from the inlet
filter with a brush.
sperate the inlet
hose.
Cleaning the drain filter
• In case "Pump-Model" drain hose, this filter’s equipped at the back side of washer.
• This drain filter is to screen the foreign stuffs such as threads, coins, pins, buttons etc ...
• If the drain filter is not cleaned at proper time (every 10 times of use), Drain problem could
be caused.
1Put down the remained
water in the hose. And
put a container under the
filter to collect water .
2Turn the cap counter
3Pull out the filter
assembly.
clockwise.
FILTER
CASE
CAP
CAP
CONTAINER
FILTER
4Clean the drain filter.
5Put in the filter along the
guiding prominence of
the case. Please note the
left position of the filter
adjusting the groove to
6Turn the cap clockwise
tightly.
CASE
CAP
the guide rib.
GUIDE
CAP
FILTER
CAP
RIB
SUIT
13
Download from Www.Somanuals.com. All Manuals Search And Download.
14
REMOVING STAINS
Stained, heavily-soiled, or greasy items may need to be prewashed or soaked for best results.
Soaking helps remove protein-type stains like blood, milk, or grass. Prewashing helps loosen
soil before washing.
Stain removal rules
• Use warm water for soaking or prewashing stained laundry. Hot water can set stains.
• Most stains are easier to remove when they are fresh. Old or set stains may not coconut
• Before treating any stain, find out what kind of stain it is, how old the stain is, what kind of
fabric it is, and if the fabric is color fast. (Check the care label)
• Washing and drying can set some stains.
• Start with cold or warm water, hot water can set some stain.
• When bleach is recommended, use a bleach that is safe for the fabric.
• Put the stained area face down on a paper towel or white cloth. Apply the stain remover
to the back of the stain. This forces the stain off fabric instead of through it.
Stain removal guide
STAIN
TO REMOVE
Rinse immediately in COLD water.
If stain remains, soak in cold water with an enzyme prewash.
Blood
Use ice in plastic bag to harden the gum.
Scrape off what you can and then sponge with white spirits.
Chewing gum
Sponge with COLD water and soak in an enzyme prewash.
If stains persist, rub in a little detergent and rinse in cold water.
Cocoa, Chocolate
Blot up quickly and rinse out in COLD water.
Rub in a little detergent and wash in the maximum temperature allowed for the
fabric type.
Coffee
Rinse in COLD water and wash normally.
If stain is still apparent, sponge with white spirits.
Cream/Milk
Ice cream
Rub affected area with white vinegar and then rinse under running COLD water.
Sponge with white spirits.
Treat stiffened areas with enzyme prewash
Deodorant
Soak in a COLD enzyme prewash, rinse and wash normal.
Rub affected area with bar soap and wash normally.
Egg
Fabric/Softener
Treat as soon as pressible by sponging with COLD water.
Rub a little detergent on the stain and wash normally
Fruit stains
Grass
Sponge with white sprites.
Rub in an enzyme prewash and wash as normal
Lay the affected area face down on an absorbent cloth and work from the back.
Sponge with white spirits or dry cleaning fluid. Wash normally.
Grease and oil
Apply lemon juice and salt and place in the sun. Wash normally.
Sponge with white methylated spirits and wash normally.
Iron or rust
Lipstick
Wash in WARM water and detergent.
Moisten area with lemon juice, dry in the sun and wash normally.
If stain persists and the fabric allows, use a bleach.
Mildew
Brush off any dry mud. Rinse in cold water.
If stain persists rub in a little detergent and wash normally.
Mud
Scrape off any fresh paint and sponge with a non flammable dry cleaning fluid
and wash normally.
Paint-oil based
Treat while still wet, rinse in WARM water and wash normally.
Paint-water based
Scorch marks
Dampen a cloth with hydrogen peroxide, lay it over the affected area and press
with a fairly hot iron.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
15
TROUBLE SHOOTING
Most problems are easily solved if you understand the cause.
Check the following list for problem befor calling for service.
Before calling for service, check these
PROBLEM
CHECK POINT
• The washer will not
operate at all.
• Is there a power failure?
• Is the power cord correctly connected to an electric outlet?
• Is the electric fuse broken?
• Did you turn on the power?
• Did you press Start/Hold button?
• Is there correct amount of water in the tub?
• Water is not supplied;
If water supply is not finished within 20
• Did you connect the inlet hose and open the water tap?
• Is the inlet hose or the water tap frozen?
• Is the water supply shut off?
minutes, the lamp
will light up, and
the buzzer will sound to indicate a problem.
• Does foreign matter block up the inlet hose filter?
• The washer will not drain;
• Is the drain hose frozen or blocked up by dirt?
• Is the drain hose kinked or deformed?
• Is the end of the drain hose immersed in water?
• Is there excessive dirt inside the pump housing?
If the drain is not finished within selected
time, lamp
will light up, and the buzzer
will sound to indicate a problem.
• Is the clothe in the tub collected on one side?
• Is the washing machine installed on an uneven floor or is the
vibration serious?
• The washer will not spin;
If the clothes is collected on one side
during spin and the tub becomes
unbalanced, the spin operation will be
interrupted, and then this unbalanced
condition will be corrected by following
operation: WATER SUPPLYfi RINSEfi
DRAIN However if the unbalanced
condition is unchanged despite repeating
• Is the lid open?
(The lamp
will light up in this case.)
the above operation, the lamp
light up, and the buzzer will sound to
indicate a problem.
will
•
•
These cases are not malfunctions
The sound "wing" heard during water supply is the operating sound made by the water
inlet valve.
•
The sound "sha" heard in stopping the tub is the sound that comes from the
autobalancer of the tub.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
NO.
ITEM
DWF-1089
DWF-9289
DWF-8089
DWF-7589
1
POWER SOURCE
AVAILABLE IN ALL LOCAL AC VOLTAGE AND CYCLE
50Hz
430W
60Hz
50Hz
60Hz
50Hz
60Hz
50Hz
400W
60Hz
2
POWER CONSUMPTION
480W
430W
480W
400W
460W
460W
55Kg (GROSS : 64Kg)
56Kg (GROSS : 65Kg)
54Kg (GROSS : 63Kg)
55Kg (GROSS : 64Kg)
50Kg (GROSS : 60Kg)
51Kg (GROSS : 61Kg)
49Kg (GROSS : 59Kg)
50Kg (GROSS : 60Kg)
MACHINE NON-PUMP
3
4
5
6
WEIGHT
PUMP
DIMENSION (WXHXD)
WASHING COURSE
WATER CONSUMPTION
628 X 1005 X 673mm
610 X 962 X 655mm
FULL AUTOMATIC 8 COURSE
(FUZZY, MEMORY, DRY, SILK, ECONOMICAL, STRONG, NIGHT, BLANKET)
NORMAL 315L
NORMAL 304L
NORMAL 265L
NORMAL 259L
HIGH(96L), MID(81L)
HIGH(93L), MID(78L)
HIGH(82L), MID(70L)
HIGH(80L), MID(68L)
LOW(65L), SMALL(49L) LOW(61L), SMALL(48L) LOW(57L), SMALL(43L) LOW(55L), SMALL(42L)
E.SMALL(36L) E.SMALL(33L) E.SMALL(31.5L) E.SMALL(30.5L)
7
8
9
WATER LEVEL SELECTOR
OPERATING WATER PRESSURE
0.3kgf/cm2~8kgf/cm2 (2.94 N/cm2~78.4N/cm2)
WASH : 145~160, SPIN : 750~800
WASH : 130~145, SPIN : 700~750
WASH : 70 (60Hz), 60 (50Hz)
60Hz
REVOLUTION
50Hz
PER MINUTE
SILK, DRY
COURSE
10 PULSATOR
6 WINGS (Ø396mm)
6 WINGS (Ø376mm)
11 WATER LAVEL CONTROL
12 ANTI NOISE PLATE
13 GEAR MECHANISM ASS’Y
14 LINT FILTER
ELECTRONICAL SENSOR
O
O
O
O
HELICAL GEAR FOR LOW NOISE
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
15 SOFTENER INLET
16 FUNCTION FOR SOAK WASH
17 ALARM SIGNAL
18 RESIDUAL TIME DISPLAY
19 AUTO. WATER SUPPLY
20 NEW WATER FLOW
21 ECONOMIC COURSE
22 FUNCTION FOR BUBBLE
23 AUTO RE-FEED WATER
24 AUTO POWER OFF
WATER FLOW FOR ADJUST THE UNBALANCED LOAD
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Download from Www.Somanuals.com. All Manuals Search And Download.
|