2007
Utility Vehicles
Gasoline and Diesel
Owner’s Manual
HUV 4421G
HUV 4421GXP
HUV 4421D
HUV 4421DXP
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTICE
Warranty information appears on the last pages of this manual. No other warranties, express or implied, are
contained herein. Your authorized representative checked the vehicle before it was delivered to you and will
provide you a copy of the completed vehicle warranty registration form.
Husqvarna is not liable for errors in this manual or for incidental or consequential damages that result from the
use of the material in this manual.
This manual contains proprietary information that is protected by copyright. All rights are reserved. No part of
this manual may be photocopied, reproduced, or translated to another language without the written consent
of Husqvarna, Inc.
The information contained in this document is subject to change without notice.
Husqvarna reserves the right to make design changes to vehicles without obligation to make these changes
on units previously sold.
These vehicles do not conform to Federal Motor Vehicle Safety Standards for automobiles or to FMVSS 500
for low-speed vehicles, and are not equipped for operation on public streets, roads, or highways.
Husqvarna Forest and Garden
7349 Statesville Rd.
Charlotte, NC 28269
USA
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Page 1
Download from Www.Somanuals.com. All Manuals Search And Download.
FOREWORD
Thank you for choosing Husqvarna, a world leader in outdoor products. You have chosen the finest utility
vehicle on the market. Please protect your investment and ensure that your Husqvarna vehicle provides years
of reliable, superior performance by reading and following the maintenance instructions in this manual.
Your comfort and safety are important to us, so we urge you to read and follow the step-by-step operating
instructions and safety procedures in this manual. These instructions must be followed in order to avoid the
risk of severe personal injury. If you rent or loan your vehicle to others, we recommend that you ask them to
read this manual before they operate the vehicle.
Husqvarna products are backed by a customer support system designed to offer you fast, courteous service.
In the event that your Husqvarna vehicle needs repairs or service, we recommend that your local authorized
Husqvarna representative perform them. For the name and address of the Husqvarna representative nearest
Husqvarna, Attention: Marketing Services, 7349 Statesville Rd., Charlotte, NC 28269 USA. Your local autho-
rized Husqvarna representative can also provide technical advice, parts, and service manuals.
We hope you will consider this owner’s manual a permanent part of your Husqvarna vehicle. If you sell the
vehicle, please include the manual so that the next owner will have the important operating, safety, and main-
tenance information it contains. Translated owner’s manuals can be downloaded from the Husqvarna web
Page 2
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Safety Details ............................................................................................................................................
General Information ................................................................................................................................... 10
Model Identification .................................................................................................................................... 10
Controls and Indicators .............................................................................................................................. 10
Roll-Over Protective Structure and Safety Belts ........................................................................................ 15
Seat Latch and Adjustment ....................................................................................................................... 17
Pre-Operation and Daily Safety Checklist ................................................................................................. 17
Performance Inspection ............................................................................................................................. 18
Driving Instructions .................................................................................................................................... 19
Bed Latch and Prop Rod – HUV 4421G and HUV 4421D Only ................................................................ 22
Loading and Unloading Cargo ................................................................................................................... 23
Vehicle Load Capacities ............................................................................................................................ 23
Towing with the Vehicle ............................................................................................................................. 25
Transporting on a Trailer ........................................................................................................................... 25
Storage ...................................................................................................................................................... 26
Maintenance .............................................................................................................................................. 28
Periodic Service Schedule ......................................................................................................................... 29
Periodic Lubrication Schedule ................................................................................................................... 32
Brake Fluid Reservoir ................................................................................................................................ 33
Engine Oil .................................................................................................................................................. 34
Gearcase Lubrication ................................................................................................................................ 39
Engine Coolant – Diesel Vehicles ............................................................................................................. 41
Air Intake System ...................................................................................................................................... 41
Fueling Instructions ................................................................................................................................... 42
Battery ....................................................................................................................................................... 45
Using A Booster Battery (Jump Starting) ................................................................................................... 46
Cleaning the Vehicle .................................................................................................................................. 47
Accessories ............................................................................................................................................... 48
Subsequent Owner Registration ................................................................................................................ 49
Vehicle Specifications ................................................................................................................................ 50
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Vehicle Feature Identification
ALL HUV 4421 MODELS
DIESEL WARNING DECAL
(DIESEL VEHICLES ONLY,
GASOLINE WARNING DECAL
(GASOLINE VEHICLES ONLY,
ON PASSENGER-SIDE SEAT SUPPORT)
ON PASSENGER-SIDE SEAT SUPPORT)
OPERATING
INSTRUCTIONS
(ON INSTRUMENT PANEL)
HOT MANIFOLD
WARNING DECAL
(ON ENGINE
VALVE COVER)
WINCH CABLE WARNING DECAL
(FOR VEHICLES WITH WINCH ACCESSORY)
FRAME GROUND WARNING DECAL
(ON VEHICLE FRAME NEAR BATTERY)
(ON FRONT BODY)
HOT SURFACE WARNING DECAL
(ON COOLANT PIPES AND
UNDERSIDE OF BOTH SEATS)
ROTATING PARTS AND HOT MANIFOLD DECAL
(ON DRIVER-SIDE VEHICLE FRAME)
Page 4
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Vehicle Feature Identification
ALL HUV 4421 MODELS
UNDERAGE
WARNING DECAL
!
WARNING
• Do not modify or remove Roll-over Protective Structure (ROPS).
• Replace ROPS if damaged. Do not attempt repair.
• Use seat belts during operation. Do not jump from vehicle.
• Keep away from drop-offs, steep slopes, and unstable
surfaces.
CCI 102961201
CERTIFICATION
NOTICE AND WARNING DECAL
DRIVER/PASSENGER WARNING
DECAL
ROTATING PARTS DECAL - GAS
(UNDER SEAT ON DRIVER-SIDE FRAME)
ROTATING PARTS
DECAL - DIESEL
(UNDER SEAT ON
DRIVER-SIDE FRAME)
SERIAL NUMBER
DECAL
TRAILER HITCH
DECAL
BED LATCH
WARNING DECAL
(ON REAR RECEIVER HITCH)
CRUSH AREA DECAL
(ON DRIVER SIDE
AND PASSENGER SIDE)
VEHICLE LOADING DECAL
(STANDARD VEHICLE)
(HIGH-CAPACITY OPTION)
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Vehicle Feature Identification
Page 6
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Details
SAFETY DETAILS
ý WARNING
• This owner’s manual should be read completely before attempting to drive or service the
vehicle. Failure to follow the instructions in this manual could result in property damage,
severe personal injury, or death.
It is important to note that some vital statements throughout this manual and on the decals affixed to the vehi-
cle are preceded by the words DANGER, WARNING, or CAUTION. For your protection, we recommend that
you take special notice of these safety precautions. Safety precautions are essential and must be followed.
If any of the operation or warning decals on the vehicle become damaged, have been removed, or cannot be
easily read, they should be replaced immediately to avoid possible property damage, personal injury, or
death. Contact your Husqvarna dealer.
ý DANGER
• A DANGER indicates an immediate hazard that will result in severe personal injury or death.
ý WARNING
• A WARNING indicates an immediate hazard that could result in severe personal injury or
death.
ý CAUTION
• A CAUTION with the safety alert symbol indicates a hazard or unsafe practice that could
result in minor personal injury.
CAUTION
• A CAUTION without the safety alert symbol indicates a potentially hazardous situation that
could result in property damage.
TO FUSE BLOCK
DIESEL VEHICLE SHOWN
Remove negative (–)
TO GROUND cable first.
Figure 1 Battery Cable Removal
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
General Warnings
GENERAL WARNINGS
The following safety statements must be heeded whenever the vehicle is being operated, repaired, or ser-
viced. Safety decal identification information is also included beginning on page 4. Other specific safety state-
ments appear throughout this manual and on the vehicle.
ý
DANGER
• Battery – Explosive gases! Do not smoke. Keep sparks and flames away from the vehicle and
service area. Ventilate when charging or operating vehicle in an enclosed area. Wear a full
face shield and rubber gloves when working on or near batteries.
• Gasoline/Diesel – Flammable! Explosive! Do not smoke. Keep sparks and flames away from
the vehicle and service area. Service only in a well-ventilated area.
• Do not operate engine in an enclosed area without proper ventilation. The engine produces
carbon monoxide, which is an odorless, deadly poison.
• A Husqvarna vehicle will not provide protection from lightning, flying objects, or other storm-
related hazards. If caught in a storm while driving a Husqvarna vehicle, exit the vehicle and
seek shelter in accordance with applicable safety guidelines for your location.
ý WARNING
• Follow the procedures exactly as stated in this manual, and heed all DANGER, WARNING, and
CAUTION statements in this manual as well as those on the vehicle.
• Do not leave children unattended on vehicle.
• Children requiring a child safety seat must not ride on the vehicle. Comply with state and local
laws pertaining to child safety.
• The driver and passenger must be restrained at all times with the safety belts provided to help
prevent injury in the event of sudden braking, collision, or roll-over.
• No more than one person per bucket seat at one time. No more than two persons per bench
seat at one time. Do not allow people to ride in any part of the vehicle that is not equipped with
a seat and a safety belt. Do not allow a passenger to hold a child in his or her lap while the
vehicle is moving.
• Prior to leaving the vehicle unattended or servicing the vehicle, place attachment on the
ground, set the park brake, place the Forward/Reverse handle in the NEUTRAL position, turn
the key switch to the OFF position, and remove the key. Chock the wheels when servicing the
vehicle.
• Improper use of the vehicle or failure to properly maintain it could result in decreased vehicle
performance, severe personal injury, or death.
• Any modification or change to the vehicle that affects the stability or handling of the vehicle,
or increases maximum vehicle speed beyond factory specifications, could result in severe
personal injury or death.
• Check the vehicle for proper location of all vehicle safety and operation decals and make sure
they are in place and are easy to read.
• For vehicles with cargo beds, remove all cargo before raising the bed or servicing the vehicle.
If the vehicle is equipped with a prop rod, ensure that it is securely engaged while bed is
raised. Do not close bed until all persons are clear of cargo bed area. Keep hands clear of all
crush areas. Do not drop cargo bed; lower gently and keep entire body clear. Failure to heed
this warning could result in severe personal injury or death.
Page 8
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
General Warnings
ý WARNING
• Only trained technicians should service or repair the vehicle. Anyone doing even simple
repairs or service should have knowledge and experience in electrical and mechanical repair.
The appropriate instructions must be used when performing maintenance, service, or
accessory installation.
• To avoid unintentionally starting the vehicle:
- Disconnect battery cables, negative (–) cable first (Figure 1).
- Gasoline vehicles only: Disconnect the spark plug wires from the spark plugs.
• Frame ground – Do not allow tools or other metal objects to contact frame when
disconnecting battery cables or other electrical wiring. Do not allow a positive wire to touch
the vehicle frame, engine, or any other metal component.
• Wear safety glasses or approved eye protection when servicing the vehicle. Wear a full face
shield and rubber gloves when working on or near batteries.
• Do not wear loose clothing or jewelry such as rings, watches, chains, etc., when servicing the
vehicle.
• Use insulated tools when working near batteries or electrical connections. Use extreme
caution to avoid shorting of components or wiring.
• When servicing the vehicle with part of the vehicle on jack stands, do not operate the engine
with the Forward/Reverse handle in either the FORWARD or REVERSE position. The all-wheel
drive system will engage any wheel(s), front or rear, with traction.
Figure 2 All-wheel Drive Warning
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
GENERAL INFORMATION
This manual includes operating procedures, maintenance, and regular servicing information for HUV 4421G,
HUV 4421D, HUV 4421GXP, and HUV 4421DXP gasoline and diesel vehicles. All operating procedures,
maintenance, and regular servicing are identical unless otherwise noted.
MODEL IDENTIFICATION
The serial number of each vehicle is printed on a bar code decal mounted on the frame above the brake pedal
body frame behind the fuel tank. The fuel tank must be removed to view this decal. See following NOTE.
NOTE: Have the vehicle serial number available when ordering parts or making inquiries.
SERIAL NUMBER
7349 STATESVILLE RD.
DH0601-123456
CHARLOTTE, NC 28269
Figure 3 Serial Number
CONTROLS AND INDICATORS
ý WARNING
• Before allowing anyone to drive the vehicle, make sure the driver is familiar with all controls
and operating procedures.
• Do not tamper with the high idle speed setting on the diesel vehicle. Doing so will void the
warranty, as well as damage the engine and other components, and could result in property
damage, personal injury, or death due to unsafe speeds.
• Do not shift the Forward/Reverse handle while the vehicle is in motion.
• Engine must be at idle before shifting the Forward/Reverse handle. Failure to do so may result
in injury to inattentive passengers and (or) damage to the vehicle.
• To avoid unintentionally starting or rolling the vehicle, place attachment on the ground, set
the park brake, place the Forward/Reverse handle in the NEUTRAL position, turn the key
switch to the OFF position, and remove the key when leaving the vehicle.
Page 10
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Indicators
9
8
A
0
1/2
1
1
10
6
OPERATING INSTRUCTIONS
12
B
OFF
ON
START
C
14
15
11
1
13
7
4
5
3
2
Figure 4 Instrument Panel – Gasoline Vehicles
9
8
A
0
1/2
1
1
10
6
10
OPERATING INSTRUCTIONS
B
OFF
PREHEAT
ON
START
12
C
15
11
13
7
4
5
1
3
2
Figure 5 Instrument Panel – Diesel Vehicles
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Indicators
KEY SWITCH – GASOLINE VEHICLES
The key switch (7) is mounted on the instrument panel to the right of the steering column (Figure 4, Page 11).
It has three positions: OFF, ON, and START.
To start the vehicle, place the Forward/Reverse handle in the NEUTRAL position and turn the key to the
START position, and hold it there until the engine starts. Activate the choke (14) as necessary. If the engine
does not start after 10-15 seconds, release the key and repeat the procedure. Once the engine starts, release
the key and it will return to the ON position. The engine will idle in neutral.The engine will continue to idle until
the key is turned to the OFF position. See following WARNING, CAUTION, and NOTE.
ý WARNING
• Moving parts! Keep clear of the engine compartment while the engine is running.
CAUTION
• Do not shift the Forward/Reverse handle while the accelerator pedal is pressed. Shift the
handle only when the vehicle is at a complete stop and the engine is at idle. Failure to heed
this caution could result in damage to the transmission.
NOTE: The key can be removed only when the key switch is in the OFF position.
KEY SWITCH – DIESEL VEHICLES
The key switch (7) is mounted on the instrument panel to the right of the steering column (Figure 5, Page 11).
It has four positions: PREHEAT, OFF, ON, and START.
Use the PREHEAT feature if the temperature falls below 23 °F (–5 °C). Do not hold the key in the PREHEAT
position longer than 20 seconds. To preheat the glow plugs in cold weather, turn the key to the PREHEAT
position, and hold it there for 10-15 seconds. Then turn the key to the START position, and hold it there until
the engine starts. If the engine does not start after 10-15 seconds, turn the key to the OFF position and repeat
the procedure. Once the engine starts, release the key and it will return to the ON position. The engine will idle
in neutral. The engine will continue to idle until the key is turned to the OFF position. See previous WARN-
ING, CAUTION, and NOTE.
FORWARD/REVERSE CONTROL
The Forward/Reverse handle (6) is located on the right side of the instrument panel (Figure 4 and Figure 5,
the handle up to operate the vehicle in the forward direction, or pull the handle down to operate the vehicle in
reverse. The engine can be started only when the handle is in the NEUTRAL (middle) position. The engine
Husqvarna vehicles operate at a reduced speed in reverse. The reverse buzzer will sound as a warning when
the Forward/Reverse handle is in the REVERSE position.
ACCELERATOR PEDAL
With the engine running and the Forward/Reverse handle in the FORWARD or REVERSE position, vehicle
speed will increase as the accelerator pedal is pressed. When the accelerator pedal is released, it will return
Page 12
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Indicators
BRAKE PEDAL
The brake pedal (2) is located to the immediate left of the accelerator pedal (Figure 4 and Figure 5, Page
PARK BRAKE
The park brake pedal (3) is located to the left of the brake pedal (Figure 4 and Figure 5, Page 11). To engage
the park brake, first apply pressure to the brake pedal, then firmly press the park brake pedal until it latches
into place. To disengage the park brake, pull the park brake release handle (4) (Figure 6). See following
WARNING.
ý WARNING
• The park brake has multiple locking positions and should be firmly locked to prevent the
vehicle from rolling.
4
P
Figure 6 Park Brake Release
STEERING ADJUSTMENT LOCK
The steering wheel position is adjustable. To adjust the steering wheel position, press down on the steering
adjustment lock lever (5), then move the steering wheel to the desired position (Figure 4 and Figure 5,
Page 11). While holding the steering wheel in the desired position, pull up on the steering adjustment lock
lever to firmly lock the steering column in position. See following WARNING.
ý WARNING
• Ensure that the steering wheel lock is fully engaged before operating the vehicle.
12-VOLT ACCESSORY OUTLET
The 12-volt accessory outlet (11) is located to the right of the key switch (Figure 4 and Figure 5, Page 11). It
provides a constant 12VDC with the key switch in the ON or OFF position. See following NOTE.
NOTE: Extended use of this accessory outlet can cause the battery to become heavily discharged.
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Indicators
LOW OIL WARNING LAMP
The low oil warning lamp (9) is located on the instrument panel just to the left of the steering column (Figure 4
and Figure 5, Page 11). If the warning lamp lights up, oil should be checked and added to the engine as nec-
essary before vehicle use continues. The vehicle should never be driven when the low oil warning lamp
remains lit. If the warning lamp alternately lights and darkens, the vehicle may be driven, but oil should be
added at the first opportunity. If the oil level is correct and the warning lamp remains lit, have a trained tech-
nician check the vehicle. See following CAUTION.
CAUTION
• Failure to add oil immediately when the low oil warning lamp remains lit may result in
permanent engine damage.
FUEL GAUGE/HOUR METER
The fuel gauge and hour meter (8) are housed together on the right side of the instrument panel (Figure 4
and Figure 5, Page 11). The fuel gauge operates when the key switch is in the ON position and allows the
operator to monitor the fuel level in the vehicle. The hour meter operates only when the engine is running, and
should be used by the trained technician to track vehicle usage and determine when periodic service proce-
dures are required. See Periodic Service Schedule on page 29.
HEADLAMP CONTROL
The headlamp control (12) is located on the left side of the instrument panel (Figure 4 and Figure 5, Page
NOTE: Using the headlamps for extended periods while the engine is either off or idling will discharge the
battery.
ELECTRIC BED LIFT – OPTIONAL ON SOME VEHICLES
The electric bed lift switch (13) is located on the instrument panel to the left of the key switch (Figure 4 and
NOTE: Remove cargo before raising the bed.
To lift the bed, push up and hold the rocker switch in the upper position. Release the switch to stop the lifting
operation. To close the bed, press down and hold the switch in the lower position. The bed lift will make a loud
clicking sound to signal that the bed is in the rest position.
HIGH-TEMPERATURE WARNING LAMP – DIESEL VEHICLES ONLY
The high-temperature warning lamp (10) is located on the instrument panel to the left of the steering column,
next to the low oil warning lamp (9) (Figure 5, Page 11). The diesel engine is liquid-cooled; if the engine cool-
ant has exceeded its normal safe operating temperature, the warning lamp will illuminate. If the warning lamp
lights up, stop the vehicle and allow it to idle for approximately five minutes before stopping the engine. Con-
tact a Husqvarna dealer/distributor or a trained technician. See following WARNING.
ý WARNING
• Allow the engine to cool before servicing the engine coolant system. Engine coolant can
cause severe burns.
Page 14
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Roll-Over Protective Structure and Safety Belts
ROLL-OVER PROTECTIVE STRUCTURE AND SAFETY BELTS
All HUV 4421 vehicles are equipped with a Roll-Over Protective Structure (ROPS) and safety belts for each
occupant. See following WARNING.
ý WARNING
• The ROPS must be properly installed before operating the vehicle. Husqvarna strongly urges
that the vehicle’s occupants be properly restrained at all times with the safety belts provided.
Pregnant woman: Consult your doctor for specific recommendations. The safety belt should be worn securely
and as low as possible over the hips and not on the waist.
Injured person: Depending on the injury, first check with your doctor for specific recommendations.
To secure the safety belt, sit up straight and well back in the seat. Pull the safety belt out of the retractor and
insert the tab into the buckle. A click will be heard when the tab locks into the buckle. Position the lap belt as
low as possible on the hips – not on the waist.
The retractor will lock the belt during a sudden stop. It also may lock if the occupant leans forward too quickly.
A slow, easy motion will allow the belt to extend, and the occupant can move freely. If the safety belt cannot
be pulled out of the retractor, firmly pull the belt and release it. It should then pull smoothly out of the retractor.
To release the safety belt, press the buckle release button (1) and allow the belt to retract (Figure 7). If the
belt does not retract smoothly, pull it out and check for kinks or twists. Then make sure it remains free of twists
as it retracts.
1
Figure 7 Release Safety Belt
ý WARNING
• Do not operate the vehicle with the ROPS removed. Doing so could result in property damage,
personal injury, or death.
• Do not remove or modify any component of the ROPS structure. Doing so will result in
voiding the ROPS certification and could weaken the ROPS, resulting in serious injury or
death.
• Do not operate the vehicle if the ROPS is damaged. If the ROPS is damaged, replace the
structure. Do not attempt repair.
• In the event of a roll-over, do not attempt to jump or otherwise exit the vehicle. Remain seated
with safety belt fastened and with arms and legs inside the vehicle.
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Roll-Over Protective Structure and Safety Belts
ý WARNING
• After inserting the tab, make sure the tab and buckle are locked and that the belt is not
twisted.
• Loose fitting safety belts could increase the chance of injury due to sliding under the belt if
sudden braking should occur. Keep the safety belt snug and positioned as low on the hip
bone as possible.
• Use a single safety belt for one person at a time. Do not use a single safety belt for two or
more people – this includes children.
seat at one time. Do not allow people to ride in any part of the vehicle that is not equipped with
• The Husqvarna vehicle is not designed to meet child seat compatibility requirements.
Children requiring a child safety seat must not ride on the vehicle. Comply with state and local
laws pertaining to child safety.
ý CAUTION
• Be careful not to damage the safety belt webbing or hardware.
• Inspect the safety belt system periodically. Check for cuts, fraying, and loose parts. Damaged
parts should be replaced immediately. Do not disassemble or modify the system.
• Keep safety belts clean and dry. If cleaning is necessary, use a mild soap and lukewarm water
solution. Do not use bleach, dye or abrasive cleaners as they may severely weaken the safety
belts.
• Do not insert coins, clip, etc. in the buckle as this may prevent the tab from locking into the
buckle properly.
• If the safety belt does not function normally, contact your Husqvarna dealer/distributor or
trained technician immediately. Do not occupy the seat until the safety belt is repaired.
CARGO CAGE HEADRESTS
Vehicles Equipped with Cargo Cage Option
Some vehicles are equipped with a rear cargo cage. This cargo cage includes two adjustable headrests.
To adjust the headrests
2. Raise or lower the headrest to the desired height.
3. Install the headrest hardware (1).
4. Hand-tighten the hardware until the headrest is securely attached to the cargo cage. See following
NOTE.
NOTE: Using tools to tighten the headrest hardware could result in overtightening. Overtightening the
headrest hardware could result in damage to the cargo cage structure and/or the hardware.
Page 16
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Seat Latch and Adjustment
1
Figure 8 Adjust Headrests
SEAT LATCH AND ADJUSTMENT
The vehicle seat(s) are hinged to allow easy access to the engine compartment. To raise the seat bottom,
grasp the rear side of the seat bottom, and pull firmly in a forward/upward direction. See following WARN-
ING.
ý WARNING
• Make sure seat hinges and latches are securely engaged before operating the vehicle.
Vehicles with bucket seat option:
The driver-side bucket seat is adjustable and can be moved forward or backward to accommodate the driver.
To adjust this seat, push the lever located under the driver seat to the left (towards outside of the vehicle).
Position the seat, and return the lever to its original position. See following WARNING.
ý WARNING
• Do not adjust the driver-side seat while the vehicle is in motion.
To adjust the passenger-side seat
1. Remove the seat from the vehicle.
2. Remove the four bolts and washers from the bottom of the seat mounting plate.
3. Align the mounting plate holes with holes in the seat to achieve the desired seat position.
4. Install washers and bolts, and tighten to 96 in-lb (10.8 N·m).
5. Install the seat. See preceding WARNING “Make sure seat hinges and latch...”
PRE-OPERATION AND DAILY SAFETY CHECKLIST
Each Husqvarna vehicle has been thoroughly inspected and adjusted at the factory; however, upon receiving
your new vehicle(s), you should become familiar with the controls, indicators, and operation. Carefully inspect
each vehicle to ensure that it is in proper working condition before accepting delivery.
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Page 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Performance Inspection
Use the following list as a guide to inspect the vehicle. This list should be used daily and in conjunction with
the Performance Inspection and the Periodic Service Schedule on page 29 to ensure that the vehicle is in
proper working condition. Any problems should be corrected by a Husqvarna dealer/distributor or a trained
technician.
• General: All the parts should be in place and properly installed. Be sure that all nuts, bolts, and screws
are tight. Check hose clamps for tight fit.
• Safety and information decals: Check to ensure that all safety and information decals are in place
• Safety belts: Visually inspect for cuts, fraying, and loose parts. See Roll-Over Protective Structure
• Tires: Check for proper tire pressure. Visually inspect tires for wear, damage, and proper inflation on a
daily basis. See Vehicle Specifications on page 50.
• Battery: Check electrolyte to ensure it is at the proper level (Figure 39, Page 45). Check battery posts.
Wires should be tight and free of corrosion, and battery should be fully charged.
• Engine: Check for proper engine oil and coolant levels and leaks. See Engine Oil on page 34. Check
air filter and replace if necessary.
• Fuel: Check fuel level. See Fueling Instructions on page 42. Check fuel tank, lines, fuel cap, pump,
and fuel filters for fuel leakage. Drain water from the fuel filter (diesel vehicle). See Draining Water
• Exhaust system: Check for leaks.
• Hydraulic brakes: Check fluid level. Wear in the brakes before initial vehicle operation. On a flat, open
surface, accelerate the vehicle to moderate speed, then apply the brakes under modest, steady pres-
sure. Repeat this procedure five times. See following NOTE.
NOTE: Perform the wear-in procedure when the vehicle has been in operation for less than a week, or
when the brake pads or rotor have been replaced.
PERFORMANCE INSPECTION
After you have familiarized yourself with the vehicle controls and have read and understood the driving
instructions, take the vehicle for a test drive.
Use the following list, in addition to the Pre-Operation and Daily Safety Checklist, as a guide to inspect the
vehicle daily for proper operation. Any problems should be corrected by a Husqvarna dealer/distributor or a
trained technician.
• Brakes: Be sure the brakes function properly. When brake pedal is fully pressed under moderate pres-
sure, the vehicle should come to a smooth, straight stop. If the vehicle swerves or fails to stop, have
the brake system checked and adjusted as required. When the brake pedal is fully pressed under
heavy pressure, the pedal should feel firm and the distance between the back of the pedal and the
floorboard should be a minimum of 1.25 inches (3.2 cm). Brake adjustment must be maintained so the
brake pedal cannot be pressed to the floorboard under any circumstance.
• Park brake: When latched, the park brake should lock the wheels and hold the vehicle stationary on an
incline of 20% or less.
Page 18
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Driving Instructions
• Reverse buzzer: The reverse buzzer should sound as a warning when the Forward/Reverse handle is
in the REVERSE position.
• Steering: The vehicle should be easy to steer and should not have any play in the steering wheel. Be
sure the steering wheel adjustment lever is securely locked into position.
• Accelerator: After starting the engine with the key switch and placing the Forward/Reverse handle in
the FORWARD position, the vehicle should accelerate smoothly to full speed as the accelerator pedal
is pressed. When the pedal is released it should return to the original position, and the engine should
idle. Husqvarna vehicles operate at reduced speed in reverse.
• Governor: Check maximum vehicle speed. The vehicle should operate in forward at a maximum
• General: Listen for any unusual noises such as squeaks or rattles. Check the vehicle’s ride and perfor-
mance. Have a Husqvarna dealer or a trained technician investigate anything unusual.
DRIVING INSTRUCTIONS
ý WARNING
• Only licensed drivers should be allowed to drive the vehicle.
• Before allowing anyone to drive the vehicle, make sure the driver is familiar with all controls
and operating procedures.
• No one under the age of 16 years should be allowed to drive the vehicle.
seat at one time. Do not allow people to ride in any part of the vehicle that is not equipped with
a seat and a safety belt. Do not allow a passenger to hold a child in his or her lap while the
• Do not allow riders in the cargo bed.
• For night use, the vehicle must be equipped with headlamps, taillamps, and reflectors.
• The vehicle is not specially equipped for handicapped persons:
- Be sure all passengers are capable of securing themselves in a moving Husqvarna vehicle
before allowing them to ride in one.
- Be sure all persons can properly operate the vehicle prior to allowing them to drive the
vehicle.
• Stop the vehicle before shifting the Forward/Reverse handle. Engine must be at idle before
shifting the Forward/Reverse handle. Failure to do so may result in injury to inattentive
passengers and (or) damage to the vehicle.
• To help avoid being struck, do not stand in front of or behind the vehicle.
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Page 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Driving Instructions
ý WARNING
• Do not leave children unattended on vehicle.
• Operate the vehicle from the driver seat only.
• To help prevent falls from the vehicle, remain seated with safety belt fastened and hold on to
hand holds at all times. Driver should keep both hands on the steering wheel when the vehicle
is in motion.
• To help prevent the possibility of serious injury, keep entire body inside the vehicle.
• To help prevent overturning the vehicle, drive slowly in turns.
• To help prevent overturning the vehicle, drive slowly straight up and down slopes. Avoid
driving the vehicle on slopes exceeding 20% incline.
• Avoid stopping a loaded vehicle on a hill. If a loaded vehicle must be stopped on a hill, avoid
sudden starts or rolling backwards and stopping suddenly. Failure to heed this warning could
result in overturning the vehicle.
• To help avoid possible injury to inattentive passengers and (or) damage to the vehicle, avoid
sudden starts, sudden stops, and abrupt turns.
• To help avoid the possibility of losing control of or overturning the vehicle, reduce speed for
adverse driving conditions such as wet grass or rough terrain.
• Do not use the vehicle on public roads. It is neither designed nor intended for street use and
should not be licensed for use on public roads.
• The vehicle should be driven in only specified areas by trained drivers.
• Do not drive while under the influence of alcohol, drugs, or medications.
• Use brakes to reduce speed when coasting downhill.
• Never attempt jumps.
• Keep away from drop-offs, steep slopes, and unstable surfaces.
• Avoid extremely hard braking in reverse.
No one should drive the vehicle without first being instructed in the proper operation and use of vehicle con-
trols. An experienced operator should accompany each first-time driver on a test drive before allowing the
driver to operate the vehicle alone.
To ensure safe operation of the vehicle, follow exactly and in order all of the following procedures. Read and
understand all instructions before driving the vehicle.
STARTING THE VEHICLE
1. Read safety warnings on the instrument panel and vehicle loading information located in the cargo bed.
2. Be sure load, if any, is secure.
3. Study and understand all controls.
4. Be sure all passengers are seated with their safety belts fastened and are holding on to hand holds.
Driver should have both hands on the steering wheel.
5. Make sure wheels are turned in desired direction and nothing is in your path.
6. Make sure the Forward/Reverse handle is in the NEUTRAL position.
7. Press and hold the brake pedal.
8. To start the vehicle
8.1. Gasoline vehicles: Turn the key to the START position and hold it there until the engine starts.
Activate the choke as necessary. If the engine does not start after 10-15 seconds, release the key
and repeat the procedure. Once the engine starts, release the key and it will return to the ON posi-
tion. The engine will idle in neutral.
Page 20
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Driving Instructions
8.2. Diesel vehicles: To preheat glow plugs in cold weather, turn the key to the PREHEAT position and
hold it there for 10-15 seconds. Turn the key to the START position and hold it there until the engine
starts. If the engine does not start after 10-15 seconds, turn the key to the OFF position and repeat
the procedure. Once the engine starts, release the key and it will return to the ON position. The
engine will idle in neutral.
9. Release the park brake.
10. Keep the brake pedal engaged, and select direction of travel by placing the shift handle in the desired
position (Figure 4 or Figure 5, Page 11). The engine must be at idle before the shift handle is moved.
A buzzer will sound as a warning when the Forward/Reverse handle is in the REVERSE position.
11. Release the brake pedal completely, and then slowly press the accelerator pedal. As the accelerator
pedal is pressed, the vehicle will begin to move. Vehicle speed will increase as the accelerator is pressed
until full speed is reached. All-wheel drive will automatically drive the appropriate wheel(s) as required.
See following WARNING.
ý WARNING
• Operator must control vehicle speed when going downhill.
• Never shift the vehicle out of the FORWARD position while going downhill. If you do, you will
not be able to shift into the REVERSE position or back into the FORWARD position until
stopped.
• Press the brake pedal as necessary and press the accelerator pedal partially when
descending a hill. With the accelerator pedal partially pressed, the governor will cause the
engine to assist the brakes in controlling downhill speed.
ALL-WHEEL DRIVE (AWD) OPERATION
All HUV 4421 vehicles feature an all-wheel drive (AWD) system. The AWD system automatically directs
power to the wheel, or wheels, that have the most traction, providing optimum traction at all times. For exam-
ple, if all wheels except the rear passenger-side wheel lose traction, then power will be directed to the rear
passenger-side wheel. The all-wheel drive vehicle can adapt traction for a wide variety of driving surfaces and
conditions. See following WARNING.
ý WARNING
Under most circumstances the driver will not need to do anything to engage the AWD system; however, the
front differential may become locked (rotate at the same speed regardless of the terrain) under certain condi-
tions. If the front differential becomes locked, drive slowly in reverse for at least 10 feet (3 meters), then brake
gently. See following WARNING.
ý WARNING
• Reduced steering control can occur if the front differential becomes locked. To help prevent
this condition, avoid extremely hard braking in reverse.
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Page 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Bed Latch and Prop Rod – HUV 4421G and HUV
4421D Only
STOPPING THE VEHICLE
To stop the vehicle, release the accelerator pedal and press the brake pedal until the vehicle comes to a com-
plete stop. See following WARNING and CAUTION.
ý WARNING
• Driving through water may affect the brakes. After driving through water, check effectiveness
of the brakes by gently pressing the brake pedal. If the vehicle does not slow down at the
normal rate, continue to press the brake pedal until the brakes dry out and normal
performance returns.
ý CAUTION
• When stopped on a hill, use the brake pedal to hold your position. Do not use the accelerator
pedal to hold position.
PARKING AND LEAVING THE VEHICLE
1. After stopping the vehicle, firmly set the park brake. Make sure it is fully engaged. This will prevent the
vehicle from rolling.
2. Turn the key switch to the OFF position, remove the key, and place the Forward/Reverse handle in the
NEUTRAL position.
BED LATCH AND PROP ROD – HUV 4421G AND HUV 4421D ONLY
The bed latch (Figure 9) has an automatically engaging prop rod and prop rod track (Figure 10) as standard
features. To lift the bed, pull the bed latch handle toward the rear of the vehicle and lift the bed. The prop rod
will come to rest in one of the notches in the prop rod track. To close the bed, lift the bed so that the prop rod
is no longer supported in one of the track notches. Push the prop rod toward the front of the vehicle to free it
from the track notch and gently lower the bed. DO NOT drop the bed. See following DANGER, WARNING,
and NOTE.
ý DANGER
• Use caution when working under bed. Be sure prop rod is secure. Otherwise the bed will fall,
resulting in severe personal injury or death.
ý WARNING
• For vehicles with cargo beds, remove all cargo before raising the bed or servicing the vehicle.
If the vehicle is equipped with a prop rod, ensure that it is securely engaged. Do not close bed
until all persons are clear of cargo bed area. Keep hands clear of all crush areas. Do not drop
cargo bed; lower gently and keep entire body clear. Failure to heed this warning could result
in severe personal injury or death.
NOTE: HUV 4421G and HUV 4421D vehicles are equipped with an automatically engaging prop rod
(Figure 10), unless equipped with the electric bed lift accessory.
Page 22
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading and Unloading Cargo
Figure 9 Bed Latch
Figure 10 Prop Rod
LOADING AND UNLOADING CARGO
ý WARNING
• Firmly engage park brake before loading vehicle.
• Do not allow riders in the cargo bed.
• Reduce vehicle load and speed when driving up or down slopes or on uneven terrain.
• Do not exceed rated vehicle capacity. Rated capacity is for level surfaces only.
• Overloading can affect vehicle handling or cause component failure, resulting in loss of
control of vehicle and possible severe personal injury or death.
• Do not load tailgate. The tailgate should be in the upright position and latched securely while
the vehicle is in motion.
• To help avoid shifting vehicle load and possibly overturning the vehicle, avoid sudden starts,
sudden stops and abrupt turns. Make sure cargo is well secured.
• Avoid top-heavy loads. The center of gravity of load should never exceed 15 inches (38 cm)
above the bottom of the cargo bed.
• The cargo’s center of gravity may affect handling, steering, and braking of the vehicle. When
the vehicle is loaded, reduce speed and drive slowly in turns.
• Unload cargo bed before raising vehicle with a lift, hoist, or jack.
• Avoid stopping on a hill when loaded. If you must stop on a hill, avoid sudden starts, or rolling
backwards and stopping suddenly. Failure to heed this warning may cause vehicle to
overturn, possibly resulting in severe personal injury.
• Reduce speed and avoid sudden stops when backing up. Failure to do so may cause the
vehicle to overturn or flip over backwards.
• Maximum cargo load must be reduced by the weight of optional equipment.
Center and secure cargo as far forward as possible in the cargo bed. Do not overload the vehicle. See Vehi-
cle Load Capacities on page 24 for vehicle capacities.
VEHICLE LOAD CAPACITIES
Maximum Occupant Capacity
The maximum occupant capacity is the maximum allowable weight for occupants (operator and passenger) to
operate the vehicle safely.
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Page 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Vehicle Load Capacities
Gross Trailer Weight
Gross trailer weight is the combination of the trailer weight and the trailer load weight.
Maximum Payload Capacity
The maximum payload capacity is the maximum amount of load that the vehicle can haul in the cargo bed
and/or tow in a trailer. The combined weight of bed load and gross trailer weight cannot exceed the vehicle’s
stated maximum payload capacity.
Vehicle Rated Capacity
The vehicle rated capacity is the maximum amount of weight the vehicle can carry, haul, and tow. This capac-
ity includes weight of occupants, bed load, and gross trailer weight.
Maximum Gross Vehicle Weight
The maximum gross vehicle weight is the combination of the vehicle weight and the maximum vehicle capac-
ity. The stated maximum gross vehicle weight must not be exceeded to maintain safe vehicle operation.
Maximum payload capacity must be reduced accordingly when any option or accessory is installed on the
vehicle. See following NOTE.
NOTE: A standard vehicle with a cab accessory that weighs 235 lb. (107 kg) must reduce its maximum
payload capacity by 235 lb. (107 kg) to 565 lb. (256 kg).
VEHICLES WITH
STANDARD
HIGH CAPACITY
VEHICLES
OPTION
A: Maximum occupant capacity
B + C: Maximum payload capacity
D: Trailer tongue weight
400 lb. (181 kg)
400 lb. (181 kg)
1050 lb. (476 kg)
150 lb. force (667 N)
1450 lb. (657.6 kg)
150 lb. force (667 N)
1200 lb. (544 kg)
A + B + C: Maximum vehicle capacity
A + B + C + Vehicle Weight: Maximum gross
vehicle weight
3012 lb. (1366 kg)
B
D
C
A
Figure 11 Vehicle Load Capacity
Page 24
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Towing with the Vehicle
TOWING WITH THE VEHICLE
ý WARNING
• Do not tow a vehicle or trailer on public streets or highways.
• Normal vehicle operating speed should be reduced when towing.
• Extreme caution should be used when towing.
• Do not allow riders in the vehicle or trailer being towed.
• Avoid sudden starts, sudden stops, and tight turns when towing.
• Avoid stopping on a hill when towing. If you must stop on a hill, avoid sudden starts, or rolling
backwards and stopping suddenly. Failure to heed this warning may cause vehicle to
overturn, possibly resulting in severe personal injury.
Towing another Husqvarna vehicle or a trailer can have adverse effects on vehicle handling. Be especially
cautious when towing other equipment with a Husqvarna vehicle. See Vehicle Load Capacities on page 23
for vehicle capacity information.
Parking the vehicle with a trailer on a hill should be avoided. If you must park on a hill, apply the brakes and
have someone chock the trailer tires. The brakes should be released to allow the chocks to absorb the trailer
load. After the trailer tires have been chocked, engage the park brake.
TRANSPORTING ON A TRAILER
ý WARNING
• Gasoline vehicles only: Turn fuel shut-off valve to the closed (OFF) position (Figure 12,
• Do not allow riders in the trailer being towed.
• Avoid sudden starts, sudden stops, and tight turns when towing.
• Avoid stopping on a hill when towing. If you must stop on a hill, avoid sudden starts, or rolling
backwards and stopping suddenly. Failure to heed this warning could cause the vehicle to
overturn, possibly resulting in severe personal injury.
• Reduce normal driving speed when transporting a vehicle on a trailer.
• For use on public roads, the trailer must meet all federal, state, and local requirements such
as taillamps, brake lamps, etc.
• Never tow a Husqvarna vehicle behind a passenger vehicle or truck on a public road unless it
is on an approved trailer.
• The vehicle to be transported should be tied securely to the trailer, with the Forward/Reverse
handle in the NEUTRAL position, the key switch in the OFF position, and the park brake firmly
engaged.
• Because of the added length of the trailer, use caution when making turns.
• Do not transport the vehicle on a trailer with a load in the vehicle cargo bed.
• Remove the vehicle windshield and secure seats before transporting on a trailer.
If the vehicle must be transported over long distances or on public highways, it should be transported on an
approved trailer that has an approved load rating of 2000 lb. (908 kg) per vehicle being transported. See fol-
lowing NOTE.
NOTE: A two-car trailer should be rated at 2 x 2000 lb. = 4000 lb. (2 x 908 kg = 1816 kg).
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Page 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Storage
STORAGE
ý DANGER
• Do not attempt to drain fuel when the engine is hot or while it is running.
• Clean up any spilled fuel before operating the vehicle.
• Store fuel in an approved fuel container only. Store in a well-ventilated area away from sparks,
open flames, heaters, or heat sources.
• Keep fuel out of the reach of children.
• Do not siphon fuel from the vehicle.
ý WARNING
• Turn the key switch to the OFF position, remove the key, and leave the Forward/Reverse
handle in the NEUTRAL position during storage. This is to prevent unintentionally starting the
vehicle or a fire hazard.
• Do not attempt to charge frozen batteries or batteries with bulged cases. Discard the battery.
Frozen batteries can explode.
ý CAUTION
• Batteries in a low state of charge will freeze at low temperatures.
CLOSED (OFF) POSITION
(SELECTOR IS ALIGNED
WITH OFF MARKINGS ON THE SIDES OF VALVE)
OFF
OFF
VIEWED FROM SELECTOR
SIDE OF VALVE
Figure 12 Fuel Shut-off Valve – Closed Position
Page 26
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Storage
FULL OPEN (ON)
POSITION
PARTIALLY CLOSED
POSITION
VIEWED FROM SELECTOR
SIDE OF VALVE
VIEWED FROM SELECTOR
SIDE OF VALVE
Figure 13 Fuel Shut-off Valve – Open Position
Figure 14 Fuel Valve – Partially Closed Position
PREPARING THE VEHICLE FOR EXTENDED STORAGE
1. Unload the vehicle so that the tires are supporting only the weight of the vehicle.
2. Store the vehicle in a cool, dry place. This will minimize battery self-discharge. If the battery appears to
be weak, have it charged by a trained technician. Use an automotive-type 12-volt battery charger rated
at 10 amps or less. Check electrolyte level after charging and add distilled water if necessary. If the bat-
3. Make sure the key switch is in the OFF position and the Forward/Reverse handle is in the NEUTRAL
position. Chock the wheels.
Gasoline vehicles:
4. Prepare the fuel tank.
4.1. Fill the tank with fresh fuel.
4.2. Following the manufacturer’s directions, add a commercially available fuel stabilizer (such as Sta-
Bil®). Run the engine in a well-ventilated area to allow treated fuel to replace untreated fuel in the
carburetor.
4.4. Plug the fuel tank vent nipple so that it is air tight. Husqvarna recommends using a slip-on vinyl cap.
5. Remove both spark plugs, and pour 1/2 ounce (14.2 mL) of SAE 10 weight oil through each of the two
spark plug holes. Rotate the engine crankshaft by hand several times, then install both spark plugs.
6. Prepare the fuel tank.
6.1. Fill the fuel tank with fresh fuel.
6.3. Plug the fuel tank vent nipple so that it is air tight. Husqvarna recommends using a slip-on vinyl cap.
All vehicles:
8. Disconnect the battery cables, negative (–) cable first. See WARNING “To avoid unintentionally start-
ing...” on page 9.
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Page 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
9. The battery should be clean and free of corrosion. Wash the battery top and terminals with a solution of
baking soda and water (1 cup (237 mL) baking soda per 1 gallon (3.8 L) of water). Rinse the solution off
the battery. Do not allow this solution to enter the battery. Be sure the terminals are tight. Let the terminals
dry and then coat them with Battery Terminal Protector Spray (P/N 603 00 00-03).
12. Thoroughly clean the front body, rear body, seats, cargo bed, engine compartment, and underside of
vehicle.
13. Do not engage the park brake. Chock the wheels to prevent the vehicle from rolling.
RETURNING THE STORED VEHICLE TO SERVICE
1. Make sure the key switch is in the OFF position and the Forward/Reverse handle is in the NEUTRAL
position. Chock the wheels.
2.1. Remove the plug from the fuel tank vent.
2.2. Connect the vent tube to the fuel tank vent.
3. Connect the battery cables, positive (+) cable first, and tighten the terminals to 12 ft-lb (16 N·m). Coat ter-
minals with Battery Terminal Protector Spray (P/N 603 00 00-03).
valve is fully open. A partially closed fuel shut-off valve combined with the use of the choke can result in
5. Place the Forward/Reverse handle in the NEUTRAL position. Crank the engine until fuel is pumped into
the carburetor (gasoline vehicles) and the fuel lines (all vehicles) and the engine starts. Turn the engine
off. See following NOTE.
NOTE: Due to the oil added to the gasoline engine in preparation for storage, the engine may smoke
excessively for a short time when it is run for the first time after storage.
6. Perform the Pre-Operation and Daily Safety Checklist on page 17 and the Performance Inspection on
MAINTENANCE
To ensure trouble-free vehicle performance, follow an established preventive maintenance program. Regular
and consistent maintenance can prevent vehicle downtime and expensive repairs. Use the Pre-Operation
and Daily Safety Checklist on page 17, the Performance Inspection on page 18, and the following Periodic
Service Schedule and Periodic Lubrication Schedule to keep the vehicle in proper working condition.
Any vehicle not functioning correctly should not be used until it is properly repaired. This will prevent further
damage to the vehicle and help prevent injury to occupants resulting from unsafe conditions.
Contact your local Husqvarna dealer/distributor for repairs and semiannual and annual periodic service.
Page 28
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Periodic Service Schedule
ý WARNING
repairs or service should have knowledge and experience in electrical and mechanical repair.
The appropriate instructions must be used when performing maintenance, service, or
• If any problems are found during scheduled inspection or service, do not operate vehicle until
repairs are made. Failure to make necessary repairs could result in fire, property damage,
severe personal injury, or death.
• Turn key switch to the OFF position, remove the key, place the Forward/Reverse handle in the
NEUTRAL position and chock the wheels prior to servicing.
• Moving parts: Do not attempt to service vehicle while engine is running.
• Hot! Do not attempt to service hot engine or exhaust system. Failure to heed this warning
could result in severe burns.
If the vehicle is equipped with a prop rod, ensure that it is securely engaged while bed is
crush areas. Do not drop cargo bed; lower gently and keep entire body clear. Failure to heed
• Do not work on vehicle powertrain or under cargo bed when it is loaded.
• To avoid unintentionally starting the vehicle:
- Gasoline vehicles only: Disconnect the spark plug wires from the spark plugs.
• If wires are removed or replaced make sure wiring and wire harness are properly routed and
secured. Failure to properly route and secure wiring could result in vehicle malfunction,
property damage, personal injury, or death.
• Lift only one end of the vehicle at a time. Use a suitable lifting device (chain hoist or hydraulic
floor jack) with 1000 lb. (454 kg) minimum lifting capacity. Do not use lifting device to hold
vehicle in raised position. Use approved jack stands of proper weight capacity to support the
vehicle and chock the wheels that remain on the floor.
PERIODIC SERVICE SCHEDULE
ý WARNING
• Service, repairs, and adjustments must be made per instructions in the appropriate
maintenance and service manual.
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Page 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Periodic Service Schedule
NOTE: If the vehicle is constantly subjected to heavy use or severe operating conditions, the preventive
maintenance procedures should be performed more often than recommended in the Periodic Ser-
vice and Lubrication Schedule.
Both the Periodic Service Schedule and the Periodic Lubrication Schedule must be followed to
keep vehicle in optimum operating condition.
PERIODIC SERVICE SCHEDULE
REGULAR INTERVAL
SERVICE
Daily service by owner
or trained technician
Check engine oil level; add if necessary.
Engine
Diesel vehicles: Check engine coolant;
add if necessary. See Engine Coolant
Diesel vehicles: Drain water from fuel
filter. See Draining Water from Fuel
Fuel filters
Brakes
Check brake fluid; add if necessary.
Check brake pedal for proper operation.
Monthly service by owner
or trained technician
Check engine circulating air passage;
visually inspect unshrouded area around
engine exhaust for grass and debris and
clean if necessary.
Diesel vehicles: Check for grass and
debris around the radiator.
Engine
Tires
Check air pressure and adjust if
necessary. See Vehicle Specifications
Check lubricant levels. Add if necessary.
See Lubrication Level Check for Front
Transmission and differentials
General vehicle
Wash engine compartment and underside
of vehicle. Do not wash engine when hot.
First adjustment after 20 hours,
additional every 100 hours of operation Engine
Gasoline vehicles: Adjust valve
clearance. See Honda GX620 Service
Manual (P/N 603 00 00-11).
Periodic Service Schedule continued on next page....
Page 30
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Periodic Service Schedule
PERIODIC SERVICE SCHEDULE
REGULAR INTERVAL
SERVICE
Semiannual service by trained
technician only
Clean terminals and wash dirt from
casing; check electrolyte level. Add
Battery
(or every 50 hours of operation,
whichever comes first)
Check and adjust if necessary. See
Section 7 – Steering and Front
Suspension in the appropriate
maintenance and service manual.
Front wheel alignment and toe-in
Electrical wiring and connections
Check for tightness and damage.
Inspect master cylinder, brake lines, and
hoses for damage or leakage.
Check park brake cables for damage;
replace if necessary.
Check brake pads and discs; replace if
necessary. For brake wear-in
Brake system
procedure, see Hydraulic Brakes in the
Checklist on page 17. See also Section
6 – Brake System in the appropriate
maintenance and service manual.
Annual service by
Check for leaks around gaskets, fill plugs,
etc.
trained technician only
(or every 100 hours of operation,
whichever comes first)
Gasoline vehicles: Inspect, clean, and
gap spark plug; replace if necessary. See
authorized Husqvarna dealer or trained
technician for service.
Engine
Diesel vehicles: Check the v-belt for
proper tension or damage. Adjust or
replace if necessary.
Diesel vehicles: Change engine coolant.
See Section 15 – Radiator and Cooling
System in the maintenance and service
manual.
Diesel vehicles: Check clamps for
tightness; check hoses for cracks.
Replace if necessary.
Radiator
Replace air filter element. See Air Intake
Engine air intake system
Check clamps for tightness; check hose
for cracks.
Check for loose hardware and tighten if
necessary.
General vehicle
Fuel filters
Replace. Dispose of used filters properly.
ý WARNING
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Page 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Periodic Lubrication Schedule
PERIODIC LUBRICATION SCHEDULE
PERIODIC LUBRICATION SCHEDULE
LUBRICATION
POINTS
REGULAR INTERVAL
SERVICE
RECOMMENDED LUBRICANT
Gasoline vehicle:
First change 20 hours –
Diesel vehicle:
First change 50 hours –
additional change for both
every 100 hours of
Gasoline vehicles: 1 qt. and 25 oz
(1.7 L) with filter
Change engine oil and oil filter
1
operation or annually,
whichever comes first.
Monthly by owner or
trained technician
Driveshaft
Chassis Lube (EP NLGI Grade 2)
Use only DOT 5 (silicone) brake fluid
2
3
Semiannually by owner
or trained technician (or
every 50 hours of
Check/add brake fluid
operation, whichever
comes first)
Rear suspension (2 fittings)
Chassis Lube (EP NLGI Grade 2)
4
5
First change 50 hours –
additional change
every 100 hours of
operation or annually,
whichever comes first
5 oz. (150 mL) Mobil 424, Exxon
Hydraul 560, or Esso Hydraul 56
lubricant
Change front differential lubricant
20 oz. (600 mL) Mobil 424, Exxon
Hydraul 560, or Esso Hydraul 56
lubricant
First change 50 hours –
additional change
every 300 hours of opera-
tion or annually, whichever
comes first
Change rear differential lubricant
Change transmission lubricant
6
7
20 oz. (600 mL) Mobil 424, Exxon
Hydraul 560, or Esso Hydraul 56
lubricant
FLOORBOARD
3
1
4
5
7
6
4
2
2
Figure 15 Lubrication Points – Gasoline Vehicles
Page 32
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Brake Fluid Reservoir
FLOORBOARD
3
4
1
5
7
6
4
2
2
Figure 16 Lubrication Points – Diesel Vehicles
BRAKE FLUID RESERVOIR
FULL
LEVEL
M
AX
1
SAFE LEVEL
M
A
X
M
IN
M
IN
2
LOW
M
A
X
LEVEL
M
IN
Figure 17 Brake Fluid and Coolant Access
(diesel vehicle shown)
Figure 18 Brake Fluid Reservoir
The brake fluid reservoir (1) is located under the hood (Figure 17). Raise the hood to check the brake fluid
level.
During the brake fluid level inspection, also inspect the following:
• The presence of brake fluid on the exterior surface of the master cylinder indicates a leak.
• The brake fluid reservoir diaphragm (located in the cap) should not have holes or other damage.
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Page 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Engine Oil
BRAKE FLUID
Brake fluid level should be within 1/4-inch (6 mm) from the top of the reservoir (Figure 18). Also, brake fluid
should be clean with no residue in the bottom of the reservoir or other evidence of contamination.
ý CAUTION
• Use only DOT 5 (silicone) brake fluid. Use of any other type brake fluid is not recommended.
ENGINE OIL
Even though the low oil warning lamp on the instrument panel should illuminate if the oil level becomes low,
the engine oil level should be checked daily. The vehicle should be on a level surface when the oil is checked.
Do not overfill the engine with oil.
OIL PRESSURE – GASOLINE ENGINE
The gasoline engine has an oil filter that is mounted on a bracket next to the back side of the front panel. Inlet
and outlet oil-carrying hoses enable oil circulation to and from the engine. See following NOTE.
NOTE: The normal oil pressure value stated in the Honda engine manual is 28 psi at idle; however, the
remote filter design causes oil pressure to be 18 psi, which is normal for this type of oil circulation
design.
ENGINE OIL LEVEL CHECK
1. Remove the oil level dipstick from the oil filler tube and wipe oil from the dipstick. See Figure 19,
ý CAUTION
• Do not remove dipstick while engine is running.
2. Check oil level by fully inserting the dipstick into the tube and immediately removing it.
3. If the oil level is at or below the low level mark on the dipstick gauge, add oil to the engine until the level
is between low and full levels (safe level). See following CAUTION.
CAUTION
• Do not fill oil above the full level mark. Doing so will result in decreased engine performance
or damage to the engine.
Page 34
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Engine Oil
2
3
2
3
1
1
Full
Level
Safe
Level
Full
Level
Low
Level
Safe
Level
Low
Level
Figure 19 Engine Oil Level Check – Gasoline Vehicles Figure 20 Engine Oil Level Check – Diesel Vehicles
With Passenger-side Dipstick
3
2
1
Full
Level
Safe
Level
Low
Level
Figure 21 Engine Oil Level Check – Diesel Vehicles
With Driver-side Dipstick
ENGINE OIL AND FILTER CHANGE
Engine oil and oil filter should be changed after the first 20 hours of operation (gasoline) or 50 hours of oper-
ation (diesel). After that, they should be changed every 100 hours of operation or annually, whichever comes
first.
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Page 35
Download from Www.Somanuals.com. All Manuals Search And Download.
Engine Oil
Engine Oil Draining
1. Turn the key switch to the OFF position and remove the key. Place the Forward/Reverse handle in the
NEUTRAL position. Chock the front wheels.
2. Disconnect the battery cables, negative (–) cable first. See WARNING “To avoid unintentionally start-
3. Remove the oil filler cap to allow the oil to drain properly.
5. From the underside of the vehicle, use a socket- or box-end (do not use an open-end) wrench to remove
the drain plug (1). Turn the plug counterclockwise and drain the engine oil into the pan. See following
WARNING.
ý WARNING
• Do not attempt to change engine oil when the engine is hot or even warm. Hot engine oil can
cause skin burns.
• Wear safety glasses or approved eye protection when servicing the vehicle. Wear rubber
gloves when handling oil drain plug, oil filter, and oil drain pan.
6. Clean the oil drain plug threads with solvent to remove oil and oil residue. Make sure that the compres-
sion washer remains on the drain plug. Inspect the compression washer and replace if necessary.
7. Use a socket- or box-end (do not use an open-end) wrench to replace the oil drain plug (1) (Figure 22
or Figure 23). Turn the plug clockwise and tighten to 29 ft-lb (40 N·m) for gas vehicles, 31 ft-lb (42 N·m)
for diesel vehicles.
1
2
VIEW FROM UNDERSIDE OF VEHICLE
1
Figure 22 Engine Oil Drain Plug and Pan – Gasoline Figure 23 Engine Oil Drain Plug and Oil Filter – Diesel
Vehicles
Vehicles
Page 36
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Engine Oil
2
Figure 24 Replace Engine Oil Filter – Gasoline
Vehicles
Engine Oil Filter Change
3. Remove the engine oil filter. Turn it counterclockwise and drain the residual oil in the filter port and filter
into the oil drain pan. See following NOTE.
NOTE: An oil drip guard (1) can be used to prevent excess oil from dripping onto the engine base plate
(Figure 25). Use an empty quart (one liter) container and cut the bottom off at an angle, then slide
the open area of the container up and under the oil filter (2) before removal. Position the port of the
plastic container so oil will be directed into the oil pan (3). A drip guard can be made by folding a
piece of cardboard, thin metal, or plastic under the oil filter, forming a channel to direct the filter port
oil into the drain pan.
Dispose of used oil according to the environmental laws and regulations for your area.
2
1
3
Figure 25 Remove Engine Oil Filter
Figure 26 Coat Rubber Seal
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Page 37
Download from Www.Somanuals.com. All Manuals Search And Download.
Engine Oil
4. Use a clean, lint-free rag to wipe the oil filter port flange surface clean where the oil filter gasket seats.
5. To help seal the new oil filter to the oil port flange, apply a light coat of white lithium NLGI Number 2
grease (Dow Corning® BR2-Plus or equivalent) or new engine oil to the rubber seal around the outside
surface of the filter before attaching it to the oil filter port (Figure 26, Page 37). Install the new oil filter
(gas: P/N 603 00 00-09) (diesel: P/N 603 00 00-12) onto the engine oil filter port. See following NOTE.
NOTE: Use only Husqvarna oil filters designed for your engine.
6. Tighten the oil filter by hand 2/3 turn after gasket contact. Do not use a band wrench or channel lock pliers.
Figure 27 Add Engine Oil – Gasoline Vehicles
Figure 28 Add Engine Oil – Diesel Vehicles
Engine Oil Filling
1. Add engine oil; use a funnel or pour spout to direct the oil into the opening (Figure 27 or Figure 28). With
filter change, the engine requires 1 qt. and 25 oz (1.7 L) of oil per change for gasoline vehicles and 3 qt.
(2.8 L) for diesel vehicles. Refer to oil viscosity guidelines for selection of oil grade (Figure 29 or
CAUTION
• Do not exceed recommended oil capacity. Doing so will decrease engine performance or
result in damage to the engine.
2. Connect the battery cables, positive (+) cable first, and tighten terminals to 12 ft-lb (16 N·m). Coat ter-
minals with Battery Terminal Protector Spray (P/N 603 00 00-03).
3. With the Forward/Reverse handle in the NEUTRAL position, start and run the engine for a few minutes.
Observe both the drain plug and the oil filter from under the vehicle and watch for oil leaks. If a leak is
detected, check the tightness of the oil filter and drain plug. Tighten, repair, and/or replace components
as necessary. See following NOTE.
NOTE: Wait five minutes after turning off the engine before removing the dipstick.
4. Remove the dipstick and check the engine oil as a final step. Replace the dipstick.
Page 38
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Gearcase Lubrication
OIL VISCOSITY
Choose the viscosity according to the temperature as shown in the appropriate oil viscosity chart (Figure 29
NOTE: Use engine oil with API classification SJ for gasoline engines and CF for diesel engines.
Using multi-grade oils (5W-20, 10W-30, and 10W-40) will increase oil consumption. If multi-grade oil is used,
check the oil level more frequently.
SAE 30
SAE 30
SAE 20
SAE 10W
SAE 10W-30
SAE 10W-30/SAE 10W-40
SAE 5W-30
Figure 29 Oil Viscosity Chart – Gasoline Vehicles
Figure 30 Oil Viscosity Chart – Diesel Vehicles
GEARCASE LUBRICATION
NOTE: Dispose of used oil according to the environmental laws and regulations for your area.
LUBRICATION LEVEL CHECK FOR FRONT DIFFERENTIAL, TRANSMISSION, AND
REAR DIFFERENTIAL
Figure 33). When the vehicle is on a level surface, use the level indicator hole (upper plug) (1) as a lubricant
level indicator. Lubricant level should be even with the bottom of level indicator hole (1).
LUBRICATION CHANGE FOR FRONT DIFFERENTIAL, TRANSMISSION, AND REAR
DIFFERENTIAL
Use the lower plug (2) for drainage (Figure 31, Figure 32, or Figure 33). Remove both plugs to allow the
lubricant to drain faster. See preceding NOTE.
Front differential:
Clean and install the drain plug (2) and washer before filling the front differential with new lubricant
(Figure 31). Tighten the drain plug to 9 ft-lb (12 N·m). Use a funnel when filling the front differential through
the lubricant level indicator hole (1). See Periodic Lubrication Schedule on page 32. Tighten the level indi-
cator plug to 10 ft-lb (14 N·m).
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Page 39
Download from Www.Somanuals.com. All Manuals Search And Download.
Gearcase Lubrication
1
2
1
2
Figure 31 Front Differential Lubrication Level
Figure 32 Transmission Lubrication Level
Transmission:
Clean and install the drain plug (2) before filling the transmission with new lubricant (Figure 32). Tighten the
drain plug to 8 ft-lb (11 N·m). Remove the fill plug from the top of the transmission case and use a funnel to
fill the transmission with lubricant. See Periodic Lubrication Schedule on page 32. Apply Loctite 567 to the
threads of the fill plug and tighten to 21 ft-lb (28 N·m).
Check the level of lubricant at the level indicator plug (1). Apply Loctite 567 to the threads of the level indicator
plug and tighten to 21 ft-lb (28 N·m).
Rear differential:
Clean and install the drain plug (2) and washer before filling the rear differential with new lubricant
(Figure 33). Tighten the drain plug to 8 ft-lb (10.8 N·m). Use a funnel to fill the differential through the lubricant
level indicator hole (1). See Periodic Lubrication Schedule on page 32. Apply Loctite 567 to the threads of
the level indicator plug and tighten to 21 ft-lb (28 N·m).
1
2
Figure 33 Rear Differential Lubrication Level
Page 40
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Engine Coolant – Diesel Vehicles
ENGINE COOLANT – DIESEL VEHICLES
ENGINE COOLANT LEVEL CHECK
The coolant reserve tank (2) is located under the hood on the passenger side (Figure 17). Raise the hood to
check the coolant level before every operation.
1. Check the coolant level of the reserve tank (2). If the coolant is at or below the LOW mark, add pre-mixed
coolant until the level reaches the FULL mark. If a leak is detected, have it checked by a trained techni-
cian. See following WARNING.
ý WARNING
• Hot! Coolant reserve tank is pressurized. Do not remove cap when engine is hot.
AIR INTAKE SYSTEM
CAUTION
• Do not drill into the driver-side frame. Failure to heed this caution could damage the engine by
allowing excessive contamination to enter the air intake system.
AIR FILTER REPLACEMENT
The air filter should be inspected periodically and replaced when necessary. Filter changes should not exceed
required in extremely dirty operating environments. In the event of a loss of power, sluggish acceleration, or
a roughly running engine, service the air filter immediately.
Air Filter Removal
1. Raise the cargo bed, and locate the air filter canister.
3. Pull the canister cap away from the canister.
4. Remove the air filter cartridge (1). See following NOTE.
NOTE: The air filter cartridge is specifically designed for this engine. It only fits into the canister one way.
Use only the Husqvarna part (P/N 603 00 00-10) designed for this engine.
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Page 41
Download from Www.Somanuals.com. All Manuals Search And Download.
Fueling Instructions
1
Figure 34 Air Filter Cartridge
Air Filter Installation
1. Push the new air filter cartridge onto the nozzle inside the canister.
2. Place the canister cap, marked TOP, on the top center of the canister.
3. Secure the canister cap with both tab locks.
FUELING INSTRUCTIONS
ý DANGER
• Turn key switch to the OFF position before fueling.
• Never pour fuel into the fuel tank when the engine is hot or while it is running.
• To avoid electric arc caused by static electricity, the fuel storage/pumping device must be
grounded. If the pump is not grounded, the vehicle must be grounded to the pump before and
during the fueling operation.
• To avoid the possibility of fire, clean up any spilled fuel before operating the vehicle.
1. Remove the fuel cap and fill the tank with fuel. Gasoline vehicles have a black fuel cap; diesel vehicles
have a green fuel cap. See preceding DANGER and following NOTE.
NOTE: Gasoline vehicles: Use unleaded gasoline only. Whenever possible, avoid using oxygenated
fuels and fuels that are blended with alcohol.
Diesel vehicles: Use only diesel fuel grade no. 2 with a cetane rating of 45 or higher.
2. Replace the fuel cap. Ensure that the cap is tightened securely.
3. Clean any spilled fuel from the cap or around the fuel cap area.
Page 42
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Fueling Instructions
TO FUEL
FILTER
FUEL SHUT-
OFF VALVE
TO FUEL
FILTER
VENT
VENT
Figure 35 Fuel Tank – Gasoline Vehicles
Figure 36 Fuel Tank – Diesel Vehicles
Biodiesel Fuel (Diesel Vehicles Only)
Biodiesel fuel has unique qualities that should be considered before it is used in the Kubota D722 diesel
engine. Review the warranty section for warranty information. During cold weather, plugged fuel lines,
plugged fuel systems, hard starting, and other unknown failures can result from use of this fuel.
Biodiesel fuel is an excellent medium for microbial growth and contamination. Microbial contamination can
cause contamination and corrosion of the fuel system and prematurely plugged fuel filters. See following
NOTE.
NOTE: Use of Biodiesel fuel may result in premature failure of fuel system components. Kubota has doc-
umented problems such as plugged fuel filters and deteriorated fuel lines during testing of Biodie-
sel fuel.
Biodiesel fuel can damage painted surfaces. Be sure to remove all spilled fuel immediately to help prevent
damage to painted surfaces.
If Biodiesel fuel will be used in the Kubota D722 engine, be sure that it meets the following requirements:
• The fuel mixture can include no more than 5% Biodiesel fuel in the mineral oil diesel fuel.
• Biodiesel fuel to be blended must meet the EN14214 standard, and the mineral oil diesel fuel to be
blended must meet the EN590 standard. The final B5 product (95/5% mix) must also comply with the
EN590 standard. See following NOTE.
NOTE: For more information on these fuel standards, please contact your nearest Kubota dealer.
If Biodiesel fuel is used, be sure to apply the following guidelines:
• Ensure the fuel tank is as full as possible at all times to prevent moisture from collecting.
• Ensure that the fuel tank cap is securely tightened to prevent water from entering the fuel tank.
• Drain all water from the fuel filter daily before operating the vehicle. See Draining Water from Fuel Fil-
ter.
• Check the engine oil level daily before the engine is started. See Engine Oil Level Check on page 34.
• Before vehicle storage, run the engine with conventional diesel fuel for at least 30 minutes to flush the
following NOTE.
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Page 43
Download from Www.Somanuals.com. All Manuals Search And Download.
Fueling Instructions
NOTE: Biodiesel fuel does not have long-term stability and must not be left in engines longer than three
months. This fuel type attracts moisture and may contain higher water content than conventional
diesel fuel.
Fuel system maintenance, cleaning, and fuel line replacement are required more frequently for
engines that are operated with Biodiesel fuel.
DRAINING WATER FROM FUEL FILTER
Diesel Vehicles Only
Water should be drained from the fuel filter daily. The fuel filter is mounted on a plate by the lower seat support
1. Position a pan under the fuel filter.
2. Lift the passenger-side seat.
3. Locate the valve (1) on the underside of the filter. Turn the valve clockwise until water begins to stream
from the filter.
4. Drain the water until it changes color (to fuel). See following WARNING.
ý WARNING
• Clean up spilled fuel. Keep sparks and flames away from the vehicle and service area. Failure
to heed this warning could result in an explosion or fire, resulting in severe personal injury or
death.
5. Close the valve by rotating it counterclockwise until the valve is firmly sealed.
6. To resupply the filter with fuel, turn the key switch to the ON position for 10 seconds. See following
NOTE.
NOTE: Dispose of water according to the environmental laws and regulations for your area.
1
Figure 37 Fuel Filter
Page 44
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery
BATTERY
ý DANGER
• Battery – Explosive gases! Do not smoke. Keep sparks and flames away from the vehicle and
service area. Ventilate when charging or operating vehicle in an enclosed area. Wear a full
face shield and rubber gloves when working on or near batteries.
• Battery – Poison! Contains acid! Causes severe burns. Avoid contact with skin, eyes, or
clothing. Antidotes:
- External: Flush with water. Call a physician immediately.
- Internal: Drink large quantities of milk or water followed with milk of magnesia or vegetable
oil. Call a physician immediately.
- Eyes: Flush with water for 15 minutes. Call a physician immediately.
• Tools, wires, and metal objects can cause sparks when shorted across a battery.
ý WARNING
• Wear safety glasses or approved eye protection when servicing the vehicle.
• Follow all instructions carefully when working with batteries.
• When jumping from a booster battery make final (negative) connection at engine frame.
• Do not jump start or charge a frozen or damaged battery. Unplug charger before connecting
or disconnecting cables to the battery. Never lean over battery while boosting, testing, or
charging.
The battery in a Husqvarna vehicle is a 12-volt, low-maintenance battery that requires infrequent checks
(Figure 38). Electrolyte level should be checked semiannually.
BATTERY
CAP
LEVEL
FRONT
OF VEHICLE
INDICATOR
PLATES
POS
ELECTROLYTE
LEVEL AT LEAST
1/2-INCH (13 MM)
ABOVE
NEG
PLATES OR
TO LEVEL
INDICATOR
Figure 38 Battery
Figure 39 Battery Electrolyte Level
1. Turn the key switch to the OFF position and remove the key. Place the Forward/Reverse handle in the
NEUTRAL position. Chock the wheels.
2.1. Remove the driver-side seat.
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Page 45
Download from Www.Somanuals.com. All Manuals Search And Download.
Using A Booster Battery (Jump Starting)
3. Disconnect the battery cables, negative (–) cable first. See WARNING “To avoid unintentionally start-
ing...” on page 9.
4. Use a flat-blade screwdriver, and carefully remove the battery cell caps from the battery. See following
WARNING.
ý WARNING
• Wear safety glasses or approved eye protection when servicing the vehicle. Wear a full face
shield and rubber gloves when working on or near batteries.
5. Carefully check the electrolyte level and add distilled water if necessary. Do not fill the battery cells above
the designated fill line. Replace battery cell caps.
6. Clean both battery terminals with a solution of baking soda and water (1 cup (237 mL) baking soda per
1 gallon (3.8 L) of water). Rinse thoroughly. Do not allow this solution to enter the battery. Tighten battery
terminals to 12 ft-lb (16 N·m). Let the terminals dry and then spray them with Battery Terminal Protector
Spray (P/N 603 00 00-03). See following CAUTION.
ý WARNING
• If battery wire terminals are damaged or corroded, replace or clean them as necessary. Failure
to do so may cause them to overheat during operation and could result in fire, property
damage, or personal injury.
Be sure the battery hold-down clamp is properly tightened. Tighten to 9 ft-lb (12.2 N·m). A loose clamp may
allow the battery to become damaged from vibration or jarring.
If battery appears weak, have it charged by a trained technician. The battery should never be left discharged
any longer than absolutely necessary (do not leave discharged overnight).
USING A BOOSTER BATTERY (JUMP STARTING)
ý WARNING
• When jumping from a booster battery make final connection (negative) at engine frame.
• Do not jump start or charge a frozen or damaged battery. Unplug charger before connecting
or disconnecting cables to the battery. Never lean over battery while boosting, testing, or
charging.
If it is necessary to use a booster battery to start the engine, BE CAREFUL!
1. Turn the key switch to the OFF position. Place the Forward/Reverse handle in the NEUTRAL position,
engage the park brake, and chock the wheels.
2. Ensure the booster battery is 12-volt.
3. Access the engine compartment by raising the cargo bed. See WARNING “For vehicles with cargo
Page 46
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the Vehicle
5. Connect the end of the first cable (1) to the positive (+) terminal of the booster battery. Connect the other
end of the same cable (2) to the positive terminal of the vehicle battery. See DANGER “Battery – Explo-
6. Connect the end of the second cable (3) to the negative (–) terminal of the booster battery. Connect the
other end of the same cable (4) to the battery frame ground.
7. Sit in the driver’s seat and start the engine.
8. After the engine has started, remove the frame ground (–) cable (4) first. Remove the cable from the pos-
itive terminal (2). Then remove the cables from the booster battery. See following CAUTION.
CAUTION
• Damage to the alternator can occur if:
- Engine is operated with battery cables disconnected.
- Booster cables are connected wrong.
POS
4
NEG
2
G
E
N
O
P
3
1
Figure 40 Jump Starting
CLEANING THE VEHICLE
Each vehicle is equipped with hand wash-washable front and rear bodies. The vehicle has a powder-coated
steel cargo bed (or optional aluminum flat bed). Use commercial automotive cleaning solutions with a sponge
or soft cloth for normal cleaning. A garden hose at normal residential water pressure is adequate. To remove
oxidation or discoloration from aluminum, use a commercially available aluminum cleaner paste and fine
grade (No. 00) steel wool.
Husqvarna does not recommend any type of pressure washing or steam cleaning. Such a process will expose
electrical components to moisture. Moisture entering electrical components can result in water damage and
subsequent component failure.
Use non-abrasive wax products. Battery acid, fertilizers, tars, asphalt, creosote, paint, or chewing gum should
be removed immediately to prevent possible stains.
The seats of the vehicle will last longer with proper cleaning. Use a solution of 10% liquid soap and warm
water applied with a soft cloth. For imbedded dirt, a soft bristle brush may be used. For heavy soiling, difficult
stains, or scratches, blemishes, or other body damage, see the appropriate maintenance and service manual.
See following NOTE.
NOTE: Dispose of waste water properly.
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Page 47
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
ACCESSORIES
There is a complete line of accessory equipment available from Husqvarna and our dealers/distributors. You
can obtain the name and phone number of your closest Husqvarna contact by visiting our web site at
Care should be taken that these accessories are properly installed by trained technicians and that they are
used in the manner for which they were designed. See following WARNING and CAUTION.
ý WARNING
• Custom cab assemblies, canopy tops, weatherproof enclosures, and windshields will not
protect occupants from flying objects.
• If the vehicle is equipped with an electric-powered bed lift, remove the bed before servicing
the bed lift system.
CAUTION
ELECTRIC WINCH ACCESSORY
If your vehicle is equipped with an electric winch, read and follow all manufacturer safety warnings and
instructions in the winch operator manual, as well as the following WARNING and CAUTION statements.
Make sure a winch warning decal is affixed to the vehicle on the seat support panel next to the receptacle for
the remote operation switch.
The winch kit available from Husqvarna includes a remote operation switch, which enables the operator to
move away from the vehicle and cable. See following WARNING and CAUTION.
ý WARNING
• Before beginning a winch operation:
- Turn key switch to the OFF position, put Forward/Reverse handle in the NEUTRAL position,
and engage the park brake.
- Do not use winch while persons are seated on the vehicle.
• Stand to the side and away from the vehicle to operate winch.
CAUTION
• Use of the winch for an extended period of time could discharge the battery. Keep winch
operations as short as possible, and drive the vehicle for several minutes after the winch
operation to recharge the battery.
MUD TIRES – OPTIONAL ON SOME VEHICLES
All-wheel drive (AWD) vehicles equipped with mud tires are intended only for off-road operation; they are not
designed for use on paved surfaces such as asphalt and concrete. Frequent driving on paved surfaces will
significantly decrease the life of the mud tires. Vehicle performance will also be reduced when driving on
paved surfaces. See following WARNING.
Page 48
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Subsequent Owner Registration
ý WARNING
• To avoid the risk of rollover when operating a vehicle equipped with mud tires on a paved
surface: reduce speed, use extreme caution, and drive slowly in turns.
Husqvarna tires are made specifically for the AWD vehicle; therefore, Husqvarna recommends that only tires
purchased from Husqvarna be used on your AWD vehicle.
SUBSEQUENT OWNER REGISTRATION
In the event a vehicle is bought as a used vehicle, we strongly urge the new owner to register the vehicle with
Husqvarna. This will enable us to contact you if the need arises. Please send your name, address, and serial
number of the vehicle to Husqvarna, 7349 Statesville Rd., Charlotte, NC 28269, Attention: Vehicle Registra-
tion.
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Page 49
Download from Www.Somanuals.com. All Manuals Search And Download.
Vehicle Specifications
VEHICLE SPECIFICATIONS
HUV
4421GXP
Gasoline
HUV
4421DXP
Diesel
HUV 4421G
Gasoline
HUV 4421D
Diesel
SPECIFICATIONS
POWER SOURCE
Engine: 4-cycle OHV, 614 cc, 20.0 maximum HP @3600 rpm (per SAE J 1940/
•
•
•
•
1349), twin-cylinder, air-cooled, with pressure lubrication system
Engine: 4-cycle OHV, 719 cc, 20.0 maximum HP @3600 rpm (per SAE J 1940/
1349), three-cylinder, liquid-cooled, with pressure lubrication system
•
•
Fuel system: Side-draft carburetor with float bowl, fixed jets, fuel filters, and impulse
fuel pump
Fuel system: Mechanical injection, fuel water separator, fuel filters, and electric fuel
•
•
•
•
pump
Governor: Automatic ground-speed sensing, internally geared in transmission
Governor: internal to engine, mechanical, centrifugal ball
Ignition: Transistorized magneto
•
•
•
•
Ignition: Compression
•
•
•
•
Transmission: Forward and reverse with neutral (4.98:1 forward, 7.79:1 reverse)
•
•
•
•
•
•
Electrical system: 12 volt, 500 cca at 0 °F (-17.8 °C), 650 at 32 °F (0 °C). 105-
minute reserve capacity and 35-amp charging capacity
•
•
•
•
Torque converter: Automatic, variable-speed, dry type
STEERING/SUSPENSION/BRAKES
Suspension:
Front: Independent double A-arms with coil-over shock absorbers
Rear: Swing arms with coil-over shock absorbers
•
•
•
•
Steering: Self-adjusting rack and pinion, Ackerman
•
•
•
•
•
•
•
•
Brakes: Hydraulic brake system – brake pads and discs on each wheel with separate
foot-operated park brake
BODY/CHASSIS
Frame/Chassis: Box tube aluminum
Side and rear body: Plastic
Cargo bed: Powder-coated steel
Front body: Geloy XTWM206
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Tires:
All Terrain: 25 x 10.5 – 12 front and rear; tubeless, 4-ply rated load range
Mud: 25 x 10.5 – 12 front and rear; tubeless, 4-ply rated load range
•
•
•
•
DIMENSIONS/WEIGHT
NOTE: Items marked with an asterisk (*) indicate approximate values.
*Overall length (box bed configuration, without brushguard):
122 in. (309.9 cm)
122 in. (309.9 cm)
Overall width:
without mirror
with mirror
58.5 in. (148.5 cm)
63.6 in. (161.5 cm)
58.5 in. (148.5 cm)
63.6 in. (161.5 cm)
*Overall height (with ROPS):
with mud tires
82.3 in. (209 cm)
81.5 in. (207 cm)
82.3 in. (209 cm)
81.5 in. (207 cm)
with all-terrain tires
Wheelbase
Ground clearance:
under differential
8.2 in. (20.8 cm)
48.8 in. (124 cm)
8.2 in. (20.8 cm)
48.8 in. (124 cm)
Front and rear wheel tread
Specifications continued on next page...
Page 50
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Vehicle Specifications
HUV
4421GXP
Gasoline
HUV
4421DXP
Diesel
HUV 4421G
Gasoline
HUV 4421D
Diesel
SPECIFICATIONS
BODY/CHASSIS, CONTINUED
Gasoline
Diesel
Gasoline
Diesel
*Weight:
1450 lb.
(657.6 kg)
1597 lb.
(724.2 kg)
1450 lb.
(657.6 kg)
1597 lb.
(724.2 kg)
Gasoline with electric bed lift, mud tires, and without brush guard
Diesel with electric bed lift, mud tires, and brush guard
Forward speed
Governed RPM
Load bed height
25 mph (40 km/h)
3825
34 in. (86.4 cm)
48.0 x 49.8 x 10.9 in.
(122 x 127 x 28 cm)
(15.3 cubic feet)
Load bed size (box bed inside dimensions)
800 lb. (363 kg)
High capacity option: 1050 lb. (476 kg)
Maximum payload capacity (level surface only)
1200 lb. (544 kg)
Vehicle rated capacity (payload, driver, and passenger; level surface only)
Maximum gross vehicle weight (fully loaded vehicle, including accessories)
High capacity option: 1450 lb (658 kg)
2750 lb. (1247 kg)
High capacity option: 3012 lb. (1366 kg)
Standard seating capacity
LIQUID CAPACITIES
2
1 qt. and 25
1 qt. and 25
oz
(1.7 L)
Engine crankcase with filter: SAE 10W-30, API classification SJ
oz
(1.7 L)
Engine crankcase with filter: SAE 10W-30, API classification CF
3 qt. (2.8 L)
5 oz. (150 mL)
3 qt. (2.8 L)
Front differential: Mobil 424, Exxon Hydraul 560, or Esso Hydraul 56 lubricant
Rear differential: Mobil 424, Exxon Hydraul 560, or Esso Hydraul 56 lubricant
Transmission: Mobil 424, Exxon Hydraul 560, or Esso Hydraul 56 lubricant
20 oz. (600 mL)
20 oz. (600 mL)
2 gal.
2 gal.
(7.8 L)
Engine coolant: mixture of 55% propylene glycol and 45% water
Brake fluid: DOT 5 (silicone) brake fluid
n/a
n/a
(7.8 L)
8 oz. (240 ml)
6.5 gallons
(24.6 L)
6.5 gallons
(24.6 L)
Fuel tank: unleaded gasoline
6.5 gallons
(24.6 L)
6.5 gallons
(24.6 L)
Fuel tank: diesel grade no.2 with cetane rating of 45 or higher
TIRE PRESSURE
All-terrain tread and mud tires
20 - 22 psi(1.38 - 1.52 Bars)
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Page 51
Download from Www.Somanuals.com. All Manuals Search And Download.
®
HUSQVARNA LIMITED TWO YEAR WARRANTY FOR 2007
TRANSPORTATION AND UTILITY VEHICLES
1. WARRANTY:
Husqvarna, INC., ("Husqvarna") hereby warrants to the Original Retail Purchaser that its new 2007 Model Transportation
and Utility Vehicles purchased from Husqvarna or an authorized dealer shall be free from defects in material and
workmanship under normal use and service as a transportation or utility vehicle for the periods stated below, subject to the
provisions, limitations and exclusions contained in this limited warranty.
LIMITED TWO YEAR / 2000 HOUR WARRANTY: The engine assembly, unitized transaxle assembly (gasoline vehicle),
motor, transaxle assembly (electric vehicle), main frame assembly, box bed hydraulic dump kit, Custom Cab assembly and
doors, and Driving Range Protective Enclosure are warranted with respect to parts and labor against defects in material and
workmanship for a period of two years or 2000 hours of operation, whichever first occurs, from the date of purchase.
LIMITED ONE YEAR / 1000 HOUR WARRANTY: All remaining components of the vehicle not specified otherwise, the
Portable Refreshment Center, and all other original equipment options and accessories supplied by Husqvarna are
warranted with respect to parts and labor against defects in material and workmanship for a period of one year or 1000
hours of operation, whichever first occurs, from the date of purchase.
This limited warranty covers material, workmanship and repair labor cost as to those items specifically listed above for the
periods specified. Such repair labor shall be performed only by Husqvarna, its authorized dealers, or a service agency
approved by Husqvarna.
IF THE WARRANTY REGISTRATION FORM IS NOT COMPLETED AND RETURNED TO Husqvarna AT THE TIME OF
THE ORIGINAL RETAIL SALE, PURCHASER MUST PROVIDE PROOF OF DATE OF PURCHASE WITH ANY
WARRANTY CLAIM.
2. EXCLUSIONS:
Excluded from any Husqvarna warranty are all fuses, filters, decals (except safety decals), spark plugs, light bulbs,
lubricants, trim pieces, seats, routine wear items such as the charger plug and receptacle, brake shoes, belts, brushes,
bushings, engine mounts, mats and pads, maintenance adjustments, cosmetic deterioration, and items which deteriorate or
fail due to exposure or ordinary wear and tear. Batteries, battery charger, onboard computer, and solid-state speed
controller are covered under separate Husqvarna warranties. Also excluded from any Husqvarna warranty is damage to a
vehicle or component resulting from a cause other than a defect including unreasonable or unintended strain or use,
improper installation of accessories, installation of parts or accessories that are not original equipment, overloading,
accident, alteration, abuse or neglect.
Transportation expenses for warranty services are also excluded from this warranty.
3. VOIDING OF WARRANTY:
THIS AND ANY OTHER WARRANTY SHALL BE VOID IF THE VEHICLE IS ABUSED OR USED IN AN UNINTENDED
MANNER OR SHOWS INDICATIONS THAT IT HAS BEEN ALTERED IN ANY WAY, INCLUDING, BUT NOT LIMITED TO,
MODIFICATION OF THE SPEED GOVERNOR, BRAKING SYSTEM, STEERING, TRANSAXLE, OR OTHER
OPERATING SYSTEMS OF THE VEHICLE TO CAUSE IT TO PERFORM OUTSIDE Husqvarna SPECIFICATIONS. THE
WARRANTY IS LIKEWISE VOID IF THE VEHICLE INVOLVED SHOWS INDICATIONS THAT REASONABLE OR
NECESSARY MAINTENANCE AS OUTLINED IN THE OWNER'S MANUAL AND MAINTENANCE AND SERVICE
MANUAL WAS NOT PERFORMED AT THE TIME AND IN THE MANNER SPECIFIED IN SUCH MANUALS.
4. SOLE REMEDY:
Husqvarna's liability under this limited warranty, or in any action whether based upon warranty, contract, negligence, strict
product liability or otherwise, shall be the repair or replacement, at Husqvarna's option, of the vehicle or component thereof
that Husqvarna deems to be defective. Replacement shall mean furnishing, during the applicable limited warranty period, a
new vehicle or factory-reconditioned vehicle or component thereof that is identical or reasonably equivalent to the warranted
product or component at no cost to the purchaser. Repair shall mean remedying a defect in the vehicle or component
thereof at no cost to the purchaser during the applicable limited warranty period. If Husqvarna elects to repair the vehicle, it
may provide factory-reconditioned parts or components. All parts and components replaced under warranty shall become
the property of Husqvarna.
5. HOW TO MAKE A WARRANTY CLAIM:
To make a warranty claim under this limited warranty, you must present the vehicle or defective component to an authorized
Husqvarna dealer.
Page 52
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
6. DISCLAIMER:
THIS LIMITED WARRANTY IS EXCLUSIVE. HUSQVARNA MAKES NO OTHER WARRANTY OF ANY KIND,
EXPRESSED OR IMPLIED. ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE WHICH EXCEED THE OBLIGATIONS OR TIME LIMITS STATED IN THIS WARRANTY ARE HEREBY
DISCLAIMED BY HUSQVARNA AND EXCLUDED FROM THIS WARRANTY. THE PURCHASER AND HUSQVARNA
EXPRESSLY AGREE THAT THE REMEDY OF THE REPLACEMENT OR REPAIR OF THE DEFECTIVE VEHICLE OR
COMPONENT THEREOF IS THE SOLE REMEDY OF THE PURCHASER. HUSQVARNA MAKES NO OTHER
REPRESENTATION OR WARRANTY OF ANY KIND, AND NO REPRESENTATIVE, EMPLOYEE, OR DEALER OF
HUSQVARNA HAS THE AUTHORITY TO MAKE OR IMPLY ANY REPRESENTATION, PROMISE OR AGREEMENT,
WHICH IN ANY WAY VARIES THE TERMS OF THIS WARRANTY.
7. NO CONSEQUENTIAL DAMAGES:
IN NO EVENT SHALL HUSQVARNA BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
INCLUDING, BUT NOT LIMITED TO, LOSS RELATED TO PROPERTY OTHER THAN THE VEHICLE, LOSS OF USE,
LOSS OF TIME, INCONVENIENCE, OR ANY OTHER ECONOMIC LOSS.
Some states allow neither limitation on the duration of an implied warranty nor exclusions or limitation of incidental or
consequential damages. Therefore, the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.
8. INFORMATION:
For further information contact WARRANTY SERVICES, HUSQVARNA FOREST & GARDEN, PRODUCT MARKETING
MANAGER - AUTOMOWER, 7349 STATESVILLE ROAD, CHARLOTTE, NC 28269 OR CALL 1-800-448-7543.
9. WARNING:
Any modification or alteration of any vehicle beyond factory specifications, including those that affect the weight distribution,
stability, or speed of the vehicle, can cause serious personal injury or death.
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Page 53
Download from Www.Somanuals.com. All Manuals Search And Download.
TECHNICAL & CONSUMER INFORMATION (GASOLINE ENGINES)
Carburetor Modification for High Altitude Operation
At high altitude, the standard carburetor air-fuel mixture will be too rich. Performance will decrease, and fuel
consumption will increase. A very rich mixture will also foul the spark plug and cause hard starting. Operation
at an altitude that differs from that at which this engine was certified, for extended periods of time, may
increase emissions.
High altitude performance can be improved by specific modifications to the carburetor. If you always operate
your engine at altitudes above 5,000 feet (1,500 meters), have your servicing dealer perform this carburetor
modification. This engine, when operating at high altitude with the carburetor modifications for high altitude
use, will meet each emission standard throughout its useful life.
Even with carburetor notification, engine horsepower will decrease about 3.5% for each 1,000-foot (300-
meter) increase in altitude. The effect of altitude on horsepower will be greater than this if no carburetor mod-
ification is made.
NOTE: When the carburetor has been modified for high altitude operation, the air-fuel mixture will be too
lean for low altitude use. Operation at altitudes below 5,000 feet (1,500 meters) with a modified
carburetor may cause the engine to overheat and result in serious engine damage. For use at low
altitudes, have your servicing dealer return the carburetor to original factory specifications.
Oxygenated Fuels
Some conventional gasolines are being blended with alcohol or an ether compound. These gasolines are col-
lectively referred to as oxygenated fuels.
To meet clean air standards, some areas of the United States and Canada use oxygenated fuels to help
reduce emissions.
If you use an oxygenated fuel, be sure it is unleaded and meets the minimum octane rating requirement.
Before using an oxygenated fuel, try to confirm the fuel’s contents. Some states/provinces require this infor-
mation to be posted on the pump.
The following are the EPA approved percentages of oxygenates:
ETHANOL:
(ethyl or grain alcohol) 10% by volume
You may use gasoline containing up to 10% ethanol by volume. Gasoline containing etha-
nol may be marketed under the name “Gasohol”.
MTBE:
(methyl tertiary butyl ether) 15% by volume
You may use gasoline containing up to 15% MTBE by volume.
(methyl or wood alcohol) 5% by volume
METHANOL:
You may use gasoline containing up to 5% methanol by volume, as long as it also contains
cosolvents and corrosion inhibitors to protect the fuel system. Gasoline containing more
than 5% methanol by volume may cause starting and/or performance problems. It may also
damage metal, rubber, and plastic parts of your fuel system.
If you notice any undesirable operating symptoms, try another service station, or switch to another brand of
gasoline.
Fuel system damage or performance problems resulting from the use of an oxygenated fuel containing more
than the percentages of oxygenates mentioned above are not covered under warranty.
Page 54
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Emission Control System Information
Source of Emissions
The combustion process produces carbon monoxide, oxides of nitrogen, and hydrocarbons. Control of hydro-
carbons and oxides of nitrogen is very important because, under certain conditions, they react to form photo-
chemical smog when subjected to sunlight. Carbon monoxide does not react in the same way, but it is toxic.
Honda utilizes lean carburetor settings and other systems to reduce the emissions of carbon monoxide,
oxides of nitrogen and hydrocarbons.
The U.S. and California Clean Air Acts
EPA and California regulations required all manufacturers to furnish written instructions describing the oper-
ation and maintenance of emission control systems.
The following instructions and procedures must be followed in order to keep the emissions from your Honda
engine within the emissions standards.
Tampering and Altering
Tampering with or altering the emission control system may increase emissions beyond the legal limit. Among
those acts that constitute tampering are:
• Removal or alteration of any part of the intake, fuel or exhaust systems.
• Altering or defeating the governor linkage or speed-adjusting mechanism to cause the engine to oper-
ate outside its design parameters.
Problems That May Affect Emissions
If you are aware of any of the following symptoms, have your engine inspected and repaired by your servicing
dealer.
• Hard starting or stalling after starting.
• Rough idle.
• Misfiring or backfiring under load.
• After burning (backfiring).
• Black exhaust smoke or high fuel consumption.
Replacement Parts
The emission control systems on your Honda engine were designed, built, and certified to conform with EPA
and California emission regulations. We recommend replacement parts be purchased from Husqvarna, Inc..
These original-design replacement parts are manufactured to the same standards as the original parts, so
you can be confident of their performance. The use of replacement parts that are not of the original design and
quality may impair the effectiveness or your emission control system.
A manufacturer of an aftermarket part assumes the responsibility that the part will not adversely affect emis-
sion performance. The manufacturer or rebuilder of the part must certify that use of the part will not result in
a failure of the engine to comply with emission regulations.
Maintenance
Follow the Periodic Service Schedule in the owner’s manual. Remember that this schedule is based on the
assumption that your vehicle will be used for its designed purpose. Sustained high-load or high-temperature
operation, or use in unusually wet or dusty conditions, will require more frequent service.
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Page 55
Download from Www.Somanuals.com. All Manuals Search And Download.
CALIFORNIA EMISSION CONTROL WARRANTY STATEMENT
Your new Husqvarna, Inc. ("Husqvarna") vehicle engine complies with both the U.S. EPA and State of California emission regulations.
YOUR WARRANTY RIGHTS AND OBLIGATIONS:
The California Air Resources Board ("CARB") and Husqvarna are pleased to explain the emission control system warranty on your 2007 vehicle engine. In California, new small off-road
engines (SORE) must be designed, built and equipped to meet the State's stringent anti-smog standards. Husqvarna must warrant the emission control system on the vehicle engine for
the periods of time listed below provided there has been no abuse, neglect or improper maintenance of your small off-road engine.
Your emission control system may include parts such as the carburetor or fuel-injection system, the ignition system, and catalytic converter. Also included may be hoses, belts,
connectors and other emission-related assemblies.
Where a warrantable condition exists, Husqvarna will repair your vehicle engine at no cost to you including diagnosis, parts and labor.
MANUFACTURER'S WARRANTY COVERAGE:
This emission control system is warranted for two years. If any emission-related part on your equipment is defective, the part will be repaired or replaced by Husqvarna.
OWNER'S WARRANTY RESPONSIBILITIES:
- As the vehicle engine owner, you are responsible for the performance of the required maintenance listed in your owner's manual. Husqvarna recommends that you retain all receipts
covering maintenance on your vehicle engine, but Husqvarna cannot deny warranty solely for the lack of receipts or for your failure to ensure the performance of all scheduled
maintenance.
- As the vehicle engine owner, you should however be aware that Husqvarna may deny you warranty coverage if vehicle engine or a part has failed due to abuse, neglect, improper
maintenance or unapproved modifications.
- You are responsible for presenting vehicle engine to a Husqvarna distribution center as soon as a problem exists. The warranty repairs should be completed in a reasonable amount of
time, not to exceed 30 days.
If you have any questions regarding your warranty rights and responsibilities, you should contact WARRANTY SERVICES, HUSQVARNA FOREST & GARDEN, PRODUCT
MARKETING MANAGER - AUTOMOWER, 7349 STATESVILLE ROAD, CHARLOTTE, NC 28269.
CLUB CAR EXPLANATION OF EMISSION CONTROL WARRANTY:
1. WARRANTY:
CLUB CAR warrants to the ultimate purchaser and each subsequent purchaser that the SORE or equipment is designed, built and equipped so as to conform with all applicable
regulations; and free from defects in materials and workmanship that cause the failure of a warranted part to be identical in all material respects to that part as described in CLUB CARs
application for certification. The warranty period begins on the date the engine or equipment is delivered to an ultimate purchaser or first placed into service. The warranty period is two
years.
2. COVERAGE:
Subject to certain conditions and exclusions as stated below, the warranty on emission-related parts is as follows:
(1) Any warranted part that is not scheduled for replacement as required maintenance in the written instructions supplied, is warranted for the warranty period stated above. If the part
fails during the period of warranty coverage, the part will be repaired or replaced by CLUB CAR according to subsection (4) below. Any such part repaired or replaced under warranty will
be warranted for the remainder of the period.
(2) Any warranted part that is scheduled only for regular inspection in the written instructions supplied is warranted for the warranty period stated above. Any such part repaired or
replaced under warranty will be warranted for the remaining warranty period.
(3) Any warranted part that is scheduled for replacement as required maintenance in the written instructions supplied is warranted for the period of time before the first scheduled
replacement date for that part. If the part fails before the first scheduled replacement, the part will be repaired or replaced by CLUB CAR according to subsection (4) below. Any such
part repaired or replaced under warranty will be warranted for the remainder of the period prior to the first scheduled replacement point for the part.
(4) Repair or replacement of any warranted part under the warranty provisions herein must be performed at a warranty station* at no charge to the owner.
(5) Notwithstanding the provisions herein, warranty services or repairs will be provided at all of our distribution centers that are franchised to service the subject engines or equipment.
(6) The engine or equipment owner will not be charged for diagnostic labor that is directly associated with diagnosis of a defective, emission-related warranted part, provided that such
diagnostic work is performed at a warranty station*.
(7) CLUB CAR is liable for damages to other engine or equipment components proximately caused by a failure under warranty of any warranted part.
(8) Throughout the engine or equipment warranty period stated above, CLUB CAR will maintain a supply of warranted parts sufficient to meet the expected demand for such parts.
(9) Any replacement part may be used in the performance of any warranty maintenance or repairs and must be provided without charge to the owner. Such use will not reduce the
warranty obligations of CLUB CAR
(10) Add-on or modified parts that are not exempted by the Air Resources Board may not be used. The use of any non-exempted add-on or modified parts by the ultimate purchaser will
be grounds for disallowing a warranty claims. CLUB CAR will not be liable to warrant failures of warranted parts caused by the use of a non-exempted add-on or modified part.
*CLUB CAR, its authorized dealers, or a service agency approved by CLUB CAR.
ITEMS COVERED BY THIS WARRANTY:
The repair or replacement of any warranted part otherwise eligible for warranty coverage may be excluded from such warranty coverage if CLUB CAR demonstrates that the engine or
equipment has been abused, neglected, or improperly maintained, and that such abuse, neglect, or improper maintenance was the direct cause of the need for repair or replacement of
the part. That notwithstanding, any adjustment of a component that has a factory installed, and properly operating, adjustment limiting device is still eligible for warranty coverage. The
following emission warranty parts list are covered:
SYSTEMS COVERED
Fuel Metering
PARTS DESCRIPTION
Carburetor assembly, fuel injection pump, fuel injection nozzle, fuel regulator
Exhaust
Catalyst
Air Induction
Air filter housing, air filter*, crankcase breather tube
Ignition
Flywheel magneto, ignition pulse generator, ignition coil assembly, ignition control module, spark plug cap, spark plug*
PCV valve, oil filler cap
Belts, fuel hose, hosing, tubing, fittings, seals, gasket, and clamps associated with the above systems
Positive Crankcase Ventilation (PCV) System
Misc. Parts
Emission-related parts will vary between vehicles; therefore, certain vehicles my not include all of the listed parts or may include equivalent parts.
3. EXCLUSIONS:
Excluded from this warranty is damage to a vehicle or component resulting from a cause other than a defect including unreasonable or unintended strain or use, improper installation of
accessories, installation of parts or accessories that are not original equipment, overloading, accident, alteration, abuse or neglect. This warranty covers only those failures resulting from
defects in material or workmanship.
Transportation expenses for warranty services are also excluded from this warranty.
4. VOIDING OF WARRANTY:
THIS AND ANY OTHER WARRANTY SHALL BE VOID IF THE VEHICLE IS ABUSED OR USED IN AN UNINTENDED MANNER OR SHOWS INDICATIONS THAT IT HAS BEEN
ALTERED IN ANY WAY, INCLUDING, BUT NOT LIMITED TO, MODIFICATION OF THE SPEED GOVERNOR, BRAKING SYSTEM, STEERING, TRANSAXLE, OR OTHER
OPERATING SYSTEMS OF THE VEHICLE TO CAUSE IT TO PERFORM OUTSIDE CLUB CAR SPECIFICATIONS. THE WARRANTY IS LIKEWISE VOID IF THE VEHICLE
INVOLVED SHOWS INDICATIONS THAT REASONABLE OR NECESSARY MAINTENANCE AS OUTLINED IN THE OWNERS MANUAL AND MAINTENANCE AND SERVICE
MANUAL WAS NOT PERFORMED AT THE TIME AND IN THE MANNER SPECIFIED IN SUCH MANUALS.
5. NO CONSEQUENTIAL DAMAGES:
In no event shall Club Car be liable for any incidental or consequential damages including, but not limited to, loss related to property other than the vehicle, loss of use, loss of time,
inconvenience, or any other economic loss. This warranty is applicable only where the California or U.S. EPA emission control system warranty regulation is in effect.
6. HOW TO MAKE A WARRANTY CLAIM:
To make a warranty claim under this limited warranty, you must present the vehicle or defective component to an authorized CLUB CAR dealer or send the defective component, freight
prepaid, to WARRANTY SERVICES, CLUB CAR, INC., 4125 Washington Road, Evans, Georgia 30809, U.S.A., 706-863-3000.
IF THE WARRANTY REGISTRATION FORM IS NOT COMPLETED AND RETURNED TO CLUB CAR AT THE TIME OF THE ORIGINAL RETAIL SALE, PURCHASER MUST
PROVIDE PROOF OF DATE OF PURCHASE WITH ANY WARRANTY CLAIM.
Page 56
2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Husqvarna Part Number 531 30 81-86
Edition Code 0706A00000
CCI P/N 103218307
Download from Www.Somanuals.com. All Manuals Search And Download.
|