OPERATOR’S MANUAL
GASOLINE PRESSURE WASHER
HU80520
Your pressure washer has been engineered and manufactured to Husky’s high standard for dependability, ease of operation,
and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
Thank you for your purchase.
SAVE THIS MANUAL FOR FUTURE REFERENCE
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Follow the maintenance instructions specified in
this manual.
WARNING:
Check damaged parts. Before further use of the
tool, a guard or other part that is damaged should
be carefully checked to determine that it will operate
properly and perform its intended function. Check for
alignment of moving parts, binding of moving parts,
breakage of parts, mounting, and any other conditions
that may affect its operation. A guard or other part that
is damaged must be properly repaired or replaced by an
authorized service center to avoid risk of personal injury.
Read and understand all instructions. Failure to follow
all instructions listed below may result in electric shock,
fire and/or carbon monoxide poisoning which will cause
death or serious personal injury.
READ ALL INSTRUCTIONS BEFORE USING
THIS PRODUCT
Know your tool. Read the operator’s manual carefully.
Learn the machine’s applications and limitations as well
as the specific potential hazards related to this tool.
Never leave tool running unattended. Turn power off.
Don’t leave tool until it comes to a complete stop.
Keep the engine free of grass, leaves, or grease to
Keep guards in place and in working order. Never
operate the tool with any guard or cover removed.
Make sure all guards are operating properly before
each use.
reduce the chance of a fire hazard.
Keep the exhaust pipe free of foreign objects.
Follow manufacturer’s recommendations for safe
loading, unloading, transport, and storage of
machine.
Remove adjusting keys and wrenches. Form habit
of checking to see that keys and adjusting wrenches
are removed from tool before turning it on.
Be thoroughly familiar with controls. Know how to
stop the product and bleed pressure quickly.
To reduce the risk of injury, keep children and visitors
away. All visitors should wear safety glasses and be
kept a safe distance from work area.
Keep tool dry, clean, and free from oil and grease.
Always use a clean cloth when cleaning. Never use
brake fluids, gasoline, petroleum-based products, or
any solvents to clean tool.
Keep the area of operation clear of all persons,
particularly small children, and pets.
Stay alert and exercise control. Watch what you are
doing and use common sense. Do not operate tool
when you are tired. Do not rush.
Do not operate the engine in a confined space where
dangerous carbon monoxide fumes can collect.
Carbon monoxide, a colorless, odorless, and extremely
dangerous gas, can cause unconsciousness or death.
Do not operate the product while under the influence
of drugs, alcohol, or any medication.
Check the work area before each use. Remove all
objects such as rocks, broken glass, nails, wire, or string
which can be thrown or become entangled in the
machine.
Use right tool. Don’t force tool or attachment to do a
job it was not designed for. Don’t use it for a purpose
not intended.
Dress properly. Do not wear loose clothing, gloves,
neckties, or jewelry. They can get caught and draw you
into moving parts. Rubber gloves and nonskid footwear
are recommended when working outdoors. Also wear
protective hair covering to contain long hair.
Do not use tool if switch does not turn it off. Have
defective switches replaced by an authorized service
center.
Before cleaning, repairing, or inspecting, shut off the
engine and make certain all moving parts have stopped.
Disconnect the spark plug wire, and keep the wire away
from the plug to prevent accidental starting.
Do not operate the equipment while barefoot or when
wearing sandals or similar lightweight footwear. Wear
protective footwear that will protect your feet and improve
your footing on slippery surfaces.
Avoid dangerous environment. Don’t use in damp or
wet locations or expose to rain. Keep work area well
lit.
Exercise caution to avoid slipping or falling.
Never use in an explosive atmosphere. Normal
Always wear safety glasses with side shields.
Everydayeyeglasseshaveonlyimpact-resistantlenses;
they are NOT safety glasses.
sparking of the motor could ignite fumes.
Do not operate while smoking or near an open
flame.
Don’t overreach or stand on unstable support. Keep
Do not operate around dry brush, twigs, cloth rags,
proper footing and balance at all times.
or other flammable materials.
Use only recommended accessories. The use of
WARNING: Risk of injection or injury – Do not direct
improper accessories may cause risk of injury.
discharge stream at persons.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFIC SAFETY RULES
Never direct a water stream toward people or pets, Never store the machine with fuel in the fuel tank
or any electrical device.
inside a building where ignition sources are present,
such as hot water and space heaters, clothes dryers,
and the like.
Before starting any cleaning operation, close doors
and windows. Clear the area to be cleaned of debris,
toys, outdoor furniture, or other objects that could create If the fuel tank has to be drained, do this outdoors.
a hazard.
To reduce the risk of fire and burn injury, handle fuel
Never pick up or carry a machine while the engine is
with care. It is highly flammable.
running.
Do not smoke while handling fuel.
Never start the machine if ice has formed in any part
Add fuel before starting the engine. Never remove the
cap of the fuel tank or add fuel while the engine is running
or when the engine is hot.
of the equipment.
Do not use acids, alkalines, solvents, flammable
material, bleaches, or industrial grade solutions
in this product. These products can cause physical
injuries to the operator and irreversible damage to the
machine.
Loosen fuel cap slowly to release pressure and to keep
fuel from escaping around the cap.
Replace all fuel tank and container caps securely.
Wipe spilled fuel from the unit. Move 30 feet away from
refueling site before starting engine.
Always operate the machine on a level surface. If the
engine is on an incline, it could seize due to improper
lubrication (even at the maximum oil level).
If fuel is spilled, do not attempt to start the engine but
move the machine away from the area of spillage and
avoid creating any source of ignition until fuel vapors
have dissipated.
WARNING: High pressure jets can be dangerous if
subject to misuse. The jet must not be directed at
persons, animals, electrical devices, or the machine
itself.
Never attempt to burn off spilled fuel under any
circumstances.
Never attempt to make any adjustments while the
engine (motor) is running (except where specifically
Before storing, allow the engine to cool.
recommended by the manufacturer).
Store fuel in a cool, well-ventilated area, safely away
Protective covers must always cover rotating parts
from spark and/or flame-producing equipment.
when the engine is running.
Store fuel in containers specifically designed for this
Keep cooling air intake (recoil starter area) and muffler
purpose.
side of the engine at least 3 feet away from buildings,
obstructions, and other burnable objects.
Empty fuel tank and restrain the unit from moving
before transporting in a vehicle.
Keep the engine away from flammables and other
When servicing use only identical replacement parts.
Use of any other parts may create a hazard or cause
product damage.
hazardous materials.
Keep away from hot parts. The muffler and other engine
parts become very hot; use caution.
ONLY use cold water.
Do not touch the spark plug and ignition cable when
Make sure minimum clearance of 3 feet is maintained
starting and operating the engine.
from combustible materials.
Check fuel hoses and joints for looseness and fuel
Save these instructions. Refer to them frequently and
use them to instruct other users. If you loan someone this
tool, loan them these instructions also.
leakage before each use.
Check bolts and nuts for looseness before each
use. A loose bolt or nut may cause serious engine
problems.
Always refuel outdoors. Never refuel indoors or in a
poorly ventilated area.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
SYMBOLS
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta-
tion of these symbols will allow you to operate the tool better and safer.
SYMBOL
NAME
DESIGNATION/EXPLANATION
Wet Conditions Alert
Do not expose to rain or use in damp locations.
To reduce the risk of injury, user must read and understand
operator’s manual before using this product.
Read The Operator’s Manual
Eye Protection
Always wear safety goggles or safety glasses with side shields and,
as necessary, a full face shield when operating this product.
Precautions that involve your safety.
Safety Alert
Hot Surface
To reduce the risk of injury or damage, avoid contact with any
hot surface.
To reduce the risk of injection or injury, never direct a water stream
towards people or pets or place any body part in the stream.
Leaking hoses and fittings are also capable of causing injection
injury. Do not hold hoses or fittings.
Risk of Injections
Fuel and its vapors are explosive and can cause severe burns
or death.
Risk of Explosion
Risk of Fire
Fuel and its vapors are extremely flammable and explosive. Fire
can cause severe burns or death.
Gas products emit carbon monoxide, an odorless, colorless,
poison gas. Breathing carbon monoxide can cause nausea,
fainting, or death.
Toxic Fumes
Kickback
To reduce the risk of injury from kickback, hold the spray wand
securely with both hands when the machine is on.
Failure to use in dry conditions and to observe safe practices can
result in electric shock.
Electric Shock
To reduce the risk of injury or damage, DO NOT USE ACIDS,
ALKALINES, BLEACHES, SOLVENTS, FLAMMABLE MATERIAL,
OR INDUSTRIAL GRADE SOLUTIONS in this product.
Chemical Burns
5
Download from Www.Somanuals.com. All Manuals Search And Download.
SYMBOLS
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL
SIGNAL
MEANING
Indicates an imminently hazardous situation, which, if not avoided, will
result in death or serious injury.
DANGER:
Indicates a potentially hazardous situation, which, if not avoided, could
result in death or serious injury.
WARNING:
Indicatesapotentiallyhazardoussituation, which, ifnotavoided, mayresult
in minor or moderate injury.
CAUTION:
CAUTION:
(Without Safety Alert Symbol) Indicates a situation that may result in prop-
erty damage.
SERVICE
WARNING:
Servicing requires extreme care and knowledge and should
be performed only by a qualified service technician. For
service we suggest you return the product to the nearest
AUTHORIZED SERVICE CENTER for repair. When servic-
ing, use only identical replacement parts.
To avoid serious personal injury, do not attempt to use
this product until you read thoroughly and understand
completely the operator’s manual. If you do not under-
stand the warnings and instructions in the operator’s
manual, do not use this product. Call Husky customer
service for assistance.
WARNING:
The operation of any power tool can result in foreign objects being thrown into your eyes, which can
result in severe eye damage. Before beginning power tool operation, always wear safety goggles or
safety glasses with side shields and, when needed, a full face shield. We recommend Wide Vision
Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye
protection which is marked to comply with ANSI Z87.1.
SAVE THESE INSTRUCTIONS
6
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
PRODUCT SPECIFICATIONS
Engine..........................................................................................................................................Briggs and Stratton Q45™*
Fuel Tank Capacity......................................................................................................................................1 quart (.95 liters)
Maximum Pounds Per Square Inch Pressure ..........................................................................................................2,200 psi
Maximum Gallons Per Minute...................................................................................................................................2.0 GPM
* No representation is made as to the horsepower of the Briggs & Stratton Q45™ Series engine.
RECOIL
STARTER
OIL CAP /
DIPSTICK
NOZZLE CLEANING
TOOL
PRIMER BULB
FUEL CAP
FUEL TANK
TELESCOPING
HANDLE
TRIGGER WITH
LOCK OUT
OFF
SWITCH
SPRAY WAND
EXTENSION
SPRAY
WAND
NOZZLES AND
NOZZLE
STORAGE
HIGH PRESSURE
HOSE
Fig. 1
7
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
KNOW YOUR PRESSURE WASHER
See Figure 1.
OFF SWITCH
To turn the engine off, press and hold the OFF switch for a
full three seconds or until the engine stops.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
wellasaknowledgeoftheprojectyouareattempting.Before
use of this product, familiarize yourself with all operating
features and safety rules.
RECOIL STARTER
The recoil starter is pulled to start the machine.
SPRAY WAND
The spray wand has a gripping surface that provides added
control of the spray wand and helps reduce fatigue. Both
the spray wand and extension have storage areas located
on top of the machine.
BRIGGS & STRATTON ENGINE
This Briggs & Stratton Q45™ engine enables the pressure
washer to achieve 2,200 PSI (pounds per square inch) at a
rate of 2.0 GPM (gallons per minute).
THERMAL RELIEF VALVE
FUEL TANK
This fuel tank has a maximum capacity of 1 quart
(.95 liters). Use unleaded automotive gasoline in the
engine.
This pump feature will prevent water temperatures from
reaching harmful levels by releasing a small amount of water
from a rubber hose. Once the water has drained, the thermal
relief valve will reset itself.
HOSE STORAGE
Once the high pressure hose is rolled, hang it on the front of
the machine using the hook and loop strap for convenient
storage.
TRIGGER WITH LOCK OUT
Pulling the trigger releases a stream of water for high
pressure cleaning. The lock out provides protection against
unauthorized use.
ASSEMBLY
UNPACKING
PACKING LIST
This product requires assembly.
Pressure Washer
Carefully cut the box down the sides then remove the
tool and any accessories from the box. Make sure that
all items listed in the packing list are included.
25 ft. High Pressure Hose
Spray Wand Assembly (upper)
Spray Wand Extension (lower)
Quick-Connect Nozzle with Nozzle Storage (3)
Nozzle Cleaning Tool
Injection Hose
NOTE: This tool is heavy. To avoid back injury, lift with
your legs, not your back, and get help when needed.
Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
Wheel (2)
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
Flat Washer (4)
If any parts are damaged or missing, please call
Axle (2)
1-866-340-3912 for assistance.
Hitch Pin (2)
4-Cycle Engine Oil (SAE 30)
Telescoping Handle
Operator’s Manual
8
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
INSTALLING THE TELESCOPING HANDLE
See Figure 3.
WARNING:
If any parts are damaged or missing do not operate this
tool until the parts are replaced. Failure to heed this warn-
ing could result in serious personal injury.
To install the telescoping handle:
Align the arrows on the U-shaped handle with the arrows
on the back of the frame.
Push and hold the button on the handle as you slide the
handle into the holes in the frame.
WARNING:
Lock the handle in place by aligning the slot in the handle
lock cap with the pin on the housing bar. Next, push the
handle lock cap down while turning the cap clockwise.
Do not attempt to modify this tool or create accesso-
ries not recommended for use with this tool. Any such
alteration or modification is misuse and could result in a
hazardous condition leading to possible serious personal
injury.
NOTE: Before use, pull the handle up until the lock
button snaps through the locking slot to secure the handle
in place.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always disconnect the engine spark plug
wire from the spark plug when assembling parts.
NOTE: Do not start the pressure washer until the engine has
been filled with oil, all hoses are connected, and the water
is turned on. Running this machine without oil will damage
the engine; running this machine without water will damage
the high pressure pump.
HITCH
PIN
ATTACHING THE WHEEL ASSEMBLY
See Figure 2.
AXLE
Fig. 2
To attach the wheels to the pressure washer base:
Locate the axle, hitch pins, and wheels. Remove the hitch
pin from the axle.
Slide the axle/washer through the hole in the center of
the wheel.
Lift the machine and slide the combination into the wheel
HANDLE
LOCK CAP
mounting hole in the machine base as shown.
Push the hitch pin into the hole on the end of the axle to
secure the wheel assembly.
NOTE: The hitch pin should be pushed into the axle until
the center of the pin rests on top of the axle.
Repeat with the second wheel.
PUSH TO
INSERT
Fig. 3
9
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
ADDING OIL TO THE ENGINE
See Figure 4.
NOTE: This machine has been shipped with approximately
2 oz. of oil in the engine from testing. You must add oil to
the engine before starting it the first time.
OIL CAP/
DIPSTICK
CAUTION:
Any attempt to start the engine without adding oil will
result in engine failure.
Place pressure washer on a flat, level surface.
Unscrew the oil cap / dipstick by turning counter-
clockwise.
Using 4-stroke engine oil (SAE 30), fill to the upper level of
the oil filter neck (18 oz., 4-cycle engine oil provided).
Replace the oil cap/dipstick and securely tighten.
Fig. 4
NOTE: This engine has a total oil capacity of 20 oz.
(.6 liters).
ADDING GASOLINE TO THE FUEL TANK
See Figure 5.
FUNNEL
WARNING:
Gasoline and its vapors are highly flammable and
explosive. To prevent serious personal injury and property
damage, handle gasoline with care. Keep away from
ignition sources, handle outdoors only, do not smoke
while adding fuel, and wipe up spills immediately.
When adding gas to the pressure washer, make sure the unit
is sitting on a flat, level surface. If the engine is hot, let the
pressure washer cool before adding gas. ALWAYS fill the
fuel tank outdoors with the machine turned off.
FUEL
CAP
Fig. 5
NOTE: Use unleaded gas only. DO NOT mix oil with gas.
Before removing the fuel cap, clean the area around it.
Remove the fuel cap.
Insert a clean funnel into the fuel tank then slowly
pour gasoline into the tank. Fill tank to approximately
1-1/2 in. below the top of the tank neck (this allows for
fuel expansion).
Replace fuel cap and tighten securely.
Clean up any spills before starting the engine.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
ATTACHING INJECTION HOSE
See Figure 6.
Beforedetergentcanbeusedwiththismachine,theinjection
hose must be attached.
INJECTION
HOSE
FITTING
Push the open end of the clear injection hose securely
over the fitting as shown in figure 7.
Place the filtered end of the injection hose in the bottle
of detergent.
ASSEMBLING THE SPRAY WAND
See Figure 7.
To attach the spray wand extension:
Place the threaded end of the wand extension in the con-
Fig. 6
nector on the end of the spray wand assembly.
SPRAY
WAND
Turn the connector clockwise until it stops. This secures
the wand extension in place.
When not in use, remove the spray wand extension from
the spray wand by turning the connector counter clock-
wise. When not in use, store both pieces on top of the
pressure washer.
CONNECTING HIGH PRESSURE HOSE TO
SPRAY WAND ASSEMBLY
See Figure 8.
CONNECTOR
Screw the collar on the high pressure hose into the spray
wand’s inlet coupler by turning the hose collar clock-
wise.
GROOVED
GRIPPING
SURFACE
Pull on the hose to be certain it is properly secured.
SPRAY
WAND
EXTENSION
Fig. 7
COLLAR
INLET
COUPLER
HIGH PRESSURE
HOSE
Fig. 8
11
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
CONNECTING THE HIGH PRESSURE HOSE TO
THE PUMP
See Figure 9.
COLLAR
Afterthehighpressurehosehasbeenuncoiledandattached
to the spray wand:
Align the collar on the threaded nipple on the pump.
Insert the nozzle on the end of the high pressure hose
collar into the threaded nipple.
Turn the collar clockwise to tighten the hose securely to
the pump.
Pull on the hose to be certain it is properly secured.
THREADED
NIPPLE
CONNECTING THE GARDEN HOSE TO THE
PRESSURE WASHER
See Figure 10.
Fig. 9
The water supply must come from a water main. NEVER
use hot water or water from pools, lakes, etc. Before
connecting the garden hose to the pressure washer:
WATER
INTAKE
Run water through the hose for 30 seconds to clean any
debris from the hose.
Inspect the screen in the water intake.
GARDEN
HOSE
If the screen is damaged, do not use the machine until
the screen has been replaced.
If the screen is dirty, clean it before connecting the garden
hose to the machine.
To connect the garden hose to the machine:
Uncoil the garden hose.
NOTE: There must be a minimum of 10 feet of
unrestricted hose between the pressure washer intake and
the hose faucet or shut off valve (such as a “Y” shut off
connector).
SCREEN
Fig. 10
With the hose faucet turned completely off, attach the
end of the garden hose to the water intake. Tighten by
hand.
OPERATION
WARNING:
WARNING:
Do not allow familiarity with tools to make you care-
less. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
Do not use any attachments or accessories not recom-
mended by the manufacturer of this tool. The use of
attachments or accessories not recommended can result
in serious personal injury.
WARNING:
WARNING:
Always wear safety goggles or safety glasses with side
shields when operating tools. Failure to do so could
result in objects being thrown into your eyes, resulting in
possible serious injury.
Do not direct discharge stream at persons. Failure to heed
this warning could result in serious injury.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
APPLICATIONS
You may use this tool for the purposes listed below:
Removing dirt and mold from decks, cement patios, and
house siding
Cleaning cars, boats, motorcycles, outdoor furniture, and
grills
STARTING AND STOPPING THE PRESSURE
WASHER
See Figures 11 - 12.
PRIMER BULB 3X
CAUTION:
Do not run the pump without the water supply connected
and turned on.
Before starting the engine:
Connect all hoses.
RECOIL
STARTER
Check all fluids (oil and gas).
Turn the garden hose on then squeeze the trigger to
relieve air pressure; hold the trigger until a steady stream
of water appears.
To start the engine:
Push primer bulb 3 times.
NOTE: If starting the engine for the first time, push the
primer bulb 5 times.
Grasp the recoil starter and pull slowly until resistance is
felt. Give the recoil starter a short, brisk pull to start the
engine.
Fig. 11
OFF SWITCH
To stop the engine:
On the top of the engine is a OFF ( O ) switch. Press and
hold the switch in the OFF position for three (3) seconds or
until the engine stops.
Fig. 12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
USING THE SPRAY WAND TRIGGER
See Figure 13.
For greater control and safety, keep both hands on the spray
wand at all times.
Pull back and hold the trigger to operate the pressure
washer.
Release the trigger to stop the flow of water through the
nozzle.
LOCK OUT
To engage the lock out:
Push up on the lock out until it clicks into the slot.
SLOT
To disengage the lock out:
Push the lock out down and into its original position.
For the most effective cleaning, the spray nozzle should be
between 8 in. and 24 in. from the surface to be cleaned. If
the spray is too close it can damage the cleaning surface.
Fig. 13
SELECTING THE RIGHT QUICK-CONNECT
NOZZLE FOR THE JOB
See Figure 14 - 15.
NOZZLE
NOTE:Thenozzlesaresecuredinaremovablerubberholder
that can be placed in a pocket for quick and immediate
access.
“CLICK”
Before starting any cleaning job, determine the best nozzle
for the job. Each of the three nozzles has a different spray
pattern. The nozzle patterns are: detergent (low pressure),
25˚ (medium pressure), and 0˚ (high pressure).
QUICK-CONNECT
COLLAR
NOTE: For a gentle rinse, select the detergent nozzle.
Scouring the surface requires a more direct spray of water.
Select the 0˚ nozzle for tough jobs. Apply detergent using
the detergent nozzle.
SPRAY WAND
EXTENSION
Fig. 14
CAUTION:
NEVER change nozzles without locking the lock out on
the spray wand.
Using the quick-connect collar, changing nozzles is easy.
Turn off the pressure washer and shut off the water
supply. Pull trigger to release water pressure.
To connect a nozzle to the spray wand:
Push the nozzle into the quick-connect collar until it clicks
in place and is secured properly.
To disconnect a nozzle from the spray wand once the
cleaning job is complete:
TRIGGER
Turn off the pressure washer and shut off the water
supply. Pull trigger to release water pressure.
Engage the lock out on the wand by pushing up on the
Fig. 15
lock out until it clicks into the slot.
Pull back and hold the collar.
Remove the nozzle by pulling it from the collar.
Place hand over nozzle then pull back the quick-connect
collar. Place nozzle in the nozzle storage area on the top
of the machine.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
MOVING THE PRESSURE WASHER
See Figure 16.
TO MOVE THE MACHINE
NOTE: Never lift or carry this product using the moving
handle.
Turn the pressure washer off.
Standing at the back of the machine, grasp the handle
firmly with both hands and pull the handle up until it locks
into place with a “click”.
Tilt the machine toward you until it balances on the wheels
then roll the machine to the desired position.
STORING THE PRESSURE WASHER
See Figure 16.
Store the pressure washer with the gas tank empty by either
draining the tank or running the pressure washer until the
gas runs out. Allow 30 minutes of “cool down” time before
storing the machine. Store in a dry, covered area where the
weather can’t damage it.
WASHING WITH DETERGENT
See Figure 17.
TO STORE THE MACHINE
Use only detergents designed for pressure washers; house-
hold detergents, acids, alkalines, bleaches, solvents, flam-
mable material, or industrial grade solutions can damage
the pump. Many detergents may require mixing prior to use.
Preparecleaningsolutionasinstructedonthesolutionbottle.
Place the injection hose in the bottom of the detergent
bottle / container.
Install the black nozzle on the spray wand.
Spray the detergent on a dry surface using long, even,
overlapping strokes. To prevent streaking, do not allow
detergent to dry on the surface.
Before shutting off the engine:
Place the injection hose in a bucket of clean water.
Flush for 1-2 minutes (spray clear water through the spray
wand).
Fig. 16
Shut off the engine.
NOTE: Shutting OFF (O) the engine will not relieve pressure
in the system. Pull trigger to release water pressure.
RINSING WITH THE PRESSURE WASHER
Turn off the pressure washer and shut off the water
supply. Pull trigger to release water pressure.
DETERGENT
CONTAINER
Engage the lock out on the wand by pushing up on the
lock out until it clicks into the slot.
Pull back and hold the collar.
Remove the nozzle by pulling it from the collar.
Select the right nozzle for the job:
INJECTION
HOSE
• Use lower pressure nozzle (green) to wash items such
as a car or boat.
• Use higher pressure nozzle for jobs such as stripping
paint and degreasing the driveway. When using these
nozzles, test a small area first to avoid surface damage.
Fig. 17
Start at the top of the area to be rinsed and work down,
overlapping the strokes.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
CLEANING THE AIR FILTER
See Figure 18.
WARNING:
A dirty air filter will cause starting difficulty, loss of
performance, and shorten the life span of the engine. Check
the air filter monthly. For best performance, replace the air
filter at least once a year.
When servicing, use only identical replacement parts.
Use of any other parts may create a hazard or cause
product damage.
NOTE: DO NOT remove the shroud as you could disconnect
or loosen the wire connecting the OFF switch to the engine
making it inoperable.
WARNING:
Always wear safety goggles or safety glasses with side
shields during power tool operation or when blowing
dust. If operation is dusty, also wear a dust mask.
Using the hole in the shroud for easy access, remove the
air filter screw.
Remove the air filter cover.
Lift the edge of the air filter carefully and pull it out.
Wash the air filter with warm, soapy water.
Rinse and squeeze to dry.
WARNING:
Before inspecting, cleaning or servicing the machine, shut
off engine, wait for all moving parts to stop, and discon-
nect spark plug wire and move it away from spark plug.
Failure to follow these instructions can result in serious
personal injury or property damage.
Put small amount of motor oil (SAE 30) on the filter
sponge. Squeeze out the excess oil then reinstall the air
filter.
NOTE: Make sure the filter is seated properly inside the
cover. Installing the filter incorrectly will allow dirt to enter
the engine, causing rapid engine wear.
NOTE:TheBriggsandStrattonQ45™enginehasaseparate
warranty found in the engine manual (included with this
product).
Reinstall the air filter cover and tighten securely using the
air filter screw.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
TOP VIEW
AIR FILTER SCREW
AIR FILTER
SCREW
SHROUD
WARNING:
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which may result in serious personal
injury.
AIR FILTER
COVER
Only the parts shown on the parts list are intended to be
repaired or replaced by the customer. All other parts should
be replaced at an authorized service center.
AIR FILTER
Before running the engine, perform the following pre-
operation steps:
Check that all bolts, nuts, etc., are securely tightened.
Make sure the air filter is clean.
Fig. 18
Check both the engine oil level and the fuel tank level;
refill as needed.
Inspect the work area for hazards.
If there is excessive noise or vibration, stop the unit
immediately.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
CHANGING THE OIL
See Figure 19.
NOTE: Run the engine out of gas to prevent gas spills if
machine is tilted. Allow 30 minutes of “cool down” time.
OIL DRAIN PLUG
CONTAINER
Place a container under the pressure washer.
Remove the oil drain plug and drain the old oil.
NOTE: Drain the oil while the engine is still warm but not
hot. Warm oil will drain quickly and more completely.
Replace the oil drain plug.
Replace the oil with new, clean oil. This engine will hold
20 oz. or .6 liters of oil (SAE 30).
NOTE: Consult hazardous waste management guidelines in
your area for the proper way to dispose of used oil.
CHECKING A FOULED SPARK PLUG
See Figure 20.
Clean carbon deposits off the spark plug electrode using
Fig. 19
a plug cleaner or wire brush.
Check electrode gap. The gap should be .6 mm - .7 mm.
Adjust the gap, if necessary, by carefully bending the side
electrode.
(Recommended spark plug: NGK BR-6HS; CHAMPION
RL86C.)
NOZZLE MAINTENANCE
See Figure 21.
0.6 - 0.7mm
Excessive pump pressure (a pulsing sensation felt while
squeezing the trigger) may be the result of a clogged or
dirty nozzle.
Fig. 20
NOZZLE
CLEANING TOOL
Turn off the pressure washer and shut off the water
supply. Pull trigger to release water pressure.
NOZZLE
Remove the nozzle from the spray wand.
NOTE: Never point the spray wand at your face.
Using the nozzle cleaning tool provided, free any foreign
materials clogging or restricting the nozzle.
Using a garden hose, flush debris out of nozzle by back
flushing (running the water through the nozzle backwards
or from the outside to the inside).
Fig. 21
Reconnect the nozzle to the spray wand.
Turn on the water supply and start the engine.
PUMP MAINTENANCE
Werecommendhavingthepumpoilchangedevery100hours
to ensure longer life of the machine. This service should be
performed by an authorized service center.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Inspect the spark plug and clean or replace, as neces-
STORING THE PRESSURE WASHER
Itisimportanttostorethisproductinafrost-freearea.Always
empty water from all hoses, the pump, and the detergent
bucket before storing.
sary.
Reinstall the spark plug, but leave the spark plug wire
disconnected.
Air Filter:
NOTE: Use of a fuel stabilizer and pump saver will give you
better performance and increase the life of the machine.
Clean the air filter.
Hoses and Pump:
Discharge Fuel:
Drain the fuel tank completely. Stored gas can go stale in
30 days.
Flush the injection hose with clean water for 1-2 minutes.
Remove all hoses. Empty the pump by pulling on the recoil
starter about 6 times. This should remove most of the liquid
from the pump.
Engine Oil:
Drain the oil and replace with fresh, clean oil.
Spark Plug:
PREPARING FOR USE AFTER STORAGE
Disconnect spark plug wire and remove the spark plug.
Pour about a teaspoon of clean, air-cooled, four-cycle
oil through the spark plug hole into the combustion
chamber.
Pull the recoil starter grip three or four times to clean oil
from the combustion chamber.
Remove spark plug from the cylinder. Wipe oil from the
spark plug and return it to the cylinder.
Leaving the spark plug out, pull the starter cord two or
Reconnect the spark plug wire.
three times to coat the inside of the cylinder wall.
Refuel the machine as described earlier in the operator’s
manual.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
PROBLEM
CAUSE
SOLUTION
Engine fails to start
1. No fuel in tank
1. Fill tank
2. Spark plug shorted or fouled
2. Replace spark plug
3. Replace spark plug
3. Spark plug is broken (cracked
porcelain or electrodes broken)
4. Ignition lead wire shorted, broken,
or disconnected from spark plug
4. Replace lead wire or attach to spark
plug
5. Ignition inoperative
5. Contact authorized service center
Engine hard to start
1. Water in gasoline
1. Drain entire system and refill with
fresh fuel
2. Weak spark at spark plug
1. Dirty air filter
2. Contact authorized service center
Engine lacks power
1. Clean or replace air filter
Detergent fails to mix with spray
1. Detergent injection hose is not
properly submerged
1. Insert injection hose into detergent
storage bucket
2. High pressure nozzle attached
2. Use low pressure nozzle (black) to
apply detergent
Pump doesn’t produce pressure
1. Low pressure nozzle installed
2. Inadequate water supply
3. Spray wand leaks
1. Replace with high pressure nozzle
2. Provide adequate water flow
3. Check connections and / or replace
wand
4. Nozzle is clogged
5. Pump is faulty
6. Air in line
4. Clean nozzle
5. Contact authorized service center
6. Squeeze trigger on spray wand to
remove air from line
Machine doesn’t reach high
pressure
1. Diameter of garden hose is too
small
1. Replace with 3/4 in. garden hose
2. Water supply is restricted
2. Check garden hose for kinks, leaks,
and blockages
3. Not enough inlet water
4. Wrong nozzle is attached
3. Open water source full force
4. Attach the high pressure nozzle
19
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
20
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
LIMITED NON-ENGINE WARRANTY STATEMENT
Techtronic Industries North America, Inc. warrants to the original retail purchaser that this HUSKY® brand pressure washer
is free from defect in material and workmanship and agrees to repair or replace, at Techtronic Industries North America,
Inc.’s discretion, any defective product free of charge within this time period from the date of purchase:
One year if the product is used for personal, family or household use.
This warranty extends to the original retail purchaser only and commences on the date of the original retail purchase.
Any part of this product found in the reasonable judgment of Techtronic Industries North America, Inc. to be defective in
material or workmanship will be repaired or replaced, without charge for parts and labor, by an Authorized Service Center
for HUSKY® brand pressure washers (Authorized HUSKY® Service Center).
The product, including any defective part, must be returned to an Authorized HUSKY® Service Center within the warranty
period. The expense of delivering the product to the service center for warranty work and the expense of returning it back
to the owner after repair or replacement will be paid for by the owner. Techtronic Industries North America, Inc.’s responsi-
bility in respect to claims is limited to making the required repairs or replacements and no claim of breach of warranty shall
be cause for cancellation or rescission of the contract of sale of any HUSKY® brand pressure washer. Proof of purchase
will be required by the dealer to substantiate any warranty claim. All warranty work must be performed by an authorized
Techtronic Industries North America, Inc. service center.
This warranty does not cover any product that has been subject to misuse, neglect, negligence, or accident, or that is used
for rental or commercial purposes, or that has been operated in any way contrary to the operating instructions as specified in
the Techtronic Industries North America, Inc. operator’s manual. This warranty does not apply to any damage to the product
that is the result of improper maintenance or to any product that has been altered or modified so as to adversely affect the
products operation, performance or durability or that has been altered or modified so as to change its intended use. The
warranty does not extend to repairs made necessary by normal wear or by the use of parts or accessories which are either
incompatible with the HUSKY® brand pressure washer or adversely affect its operation, performance or durability.
In addition, this warranty does not cover:
A. Tune-ups – Air filters, gas filters, spark plugs
B. Wear items – Hoses, connector fittings, spray nozzles, wheels, spray wand
Techtronic Industries North America, Inc. reserves the right to change or improve the design of any HUSKY® brand pressure
washer without assuming any obligation to modify any product previously manufactured.
ALL IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE STATED WARRANTY PERIOD. ACCORDINGLY, ANY
SUCH IMPLIED WARRANTIES INCLUDING MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR OTHER-
WISE, ARE DISCLAIMED IN THEIR ENTIRETY AFTER THE EXPIRATION OF THE APPROPRIATE ONE-YEAR, WARRANTY
PERIOD. TECHTRONIC INDUSTRIES NORTH AMERICA, INC.’S OBLIGATION UNDER THIS WARRANTY IS STRICTLY AND
EXCLUSIVELY LIMITED TO THE REPAIR OR REPLACEMENT OF DEFECTIVE PARTS AND TECHTRONIC INDUSTRIES
NORTH AMERICA, INC. DOES NOT ASSUME OR AUTHORIZE ANYONE TO ASSUME FOR THEM ANY OTHER OBLIGA-
TION. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE
LIMITATION MAY NOT APPLY TO YOU. TECHTRONIC INDUSTRIES NORTH AMERICA, INC. ASSUMES NO RESPON-
SIBILITY FOR INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES INCLUDING, BUT NO LIMITED TO EXPENSE OF
RETURNING THE PRODUCT TO AN AUTHORIZED HUSKY® SERVICE CENTER AND EXPENSE OF DELIVERING IT BACK
TO THE OWNER, MECHANIC’S TRAVEL TIME, TELEPHONE OR TELEGRAM CHARGES, RENTAL OF A LIKE PRODUCT
DURING THE TIME WARRANTY SERVICE IS BEING PERFORMED, TRAVEL, LOSS OR DAMAGE TO PERSONAL PROP-
ERTY, LOSS OF REVENUE, LOSS OF USE OF THE PRODUCT, LOSS OF TIME, OR INCONVENIENCE, SOME STATES
DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
This warranty applies to all HUSKY® brand pressure washer manufactured by Techtronic Industries North America, Inc.
and sold in the United States and Canada.
To locate your nearest Authorized HUSKY® Service Center, dial 1-866-340-3912.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATOR’S MANUAL
GASOLINE PRESSURE WASHER
HU80520
WARNING:
The engine exhaust from this product contains chemicals known to the State of California to cause
cancer, birth defects, or other reproductive harm.
CALIFORNIA PROPOSITION 65
• SERVICE
Now that you have purchased your tool, should a need ever exist for repair parts or
service, simply contact your nearest Authorized Service Center. Be sure to provide
all pertinent facts when you call or visit. Please call 1-866-340-3912 for your nearest
Authorized Service Center.
• MODEL NO. AND SERIAL NO.
The model number of this tool will be found on a plate attached to the top of the
machine housing. Please record the model number and serial number in the space
provided below.
• HOW TO ORDER REPAIR PARTS
When ordering repair parts, always give the following information:
HU80520
• MODEL NUMBER
• SERIAL NUMBER
TECHTRONIC INDUSTRIES NORTH AMERICA, INC.
Hwy 8
Pickens, SC 29671
Phone 1-866-340-3912
983000-868
3-3-06 (REV:01)
Download from Www.Somanuals.com. All Manuals Search And Download.
|