LightMinder™ Home Light Control System
Models 45050, 45055, 45060
Installation and Operation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
43022-01 r101607
Features
• A Home Program with three modes:
~ 7-day Same mode - allows you to quickly and easily program the same On/Off
times for every day of the week either for all Light Groups or for individual Light
Groups.
~ Week / Weekend mode - allows you to program the same On/Off times for the
weekdays, and different On/Off times for the weekend either for all Light
Groups or for individual Light Groups.
~ Custom mode - allows you to program individual On/Off times for each day of
the week, either for all Light Groups or for individual Light Groups.
• A Vacation Program with two modes:
~ Home Variable Mode - uses your Home program settings to randomly turn on
light groups for each hour and turn them off after thirty minutes.
~ Smart deterrence Mode - between the hours of 5:30PM and 11:30PM Smart
Deterrence always keeps at least one Light Group on. Each Light
Groups remains on between one hour and one hour forty-five
minutes, depending on how many Light Groups are selected for this mode. The
cycle continues through all selected Light Groups. In this way Smart Deterrence
simulates someone inside your home moving from one area to another.
•
a Manual mode that allows you to use the Transmitter as a Remote Control for your
lighting.
•
•
Convenient Transmitter wall-mounting.
For indoor use only.
Download from Www.Somanuals.com. All Manuals Search And Download.
43022-01
3
Limitations & Warnings
•
•
•
For use with switched wall outlets.
Maximum load for receptacles is 500 watts.
Receivers conform to UL 60730-2-7, Timers and Time Switches.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Any change or modification to this equipment not expressly approved by Hunter Fan Co.
will void the user’s authority to operate the equipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
43022-01
4
Transmitter Controls
W I R E L E S S L A M P
T I M E R S Y S T E M
all Off /
all Off / Scroll
Left/Back
Button
Scroll Up/
Setup
Button
ALL
OFF
SETUP
OFF
ON
A
D
B
C
ALL
ON
ALL
ON
all On / Scroll
Right / Enter
Button
all On /
Scroll Down
Button
Transmitter Controls
Download from Www.Somanuals.com. All Manuals Search And Download.
43022-01
5
Transmitter Controls (cont.)
1
2
3
Channel Switch
•VACATION
•HOME
•MANUAL
program Select Switch
Download from Www.Somanuals.com. All Manuals Search And Download.
43022-01
6
Receiver Controls
Light Group
Select Dial
Channel
Select Dial
Receiver Controls
Download from Www.Somanuals.com. All Manuals Search And Download.
43022-01
7
Setup
1) Remove the Battery Cover from the back of the Transmitter.
2) Slide the Channel Select Switch to any of the three numbers next to it.
1
2
3
Download from Www.Somanuals.com. All Manuals Search And Download.
43022-01
8
Setup (cont.)
3) On each Receiver rotate the Channel Select Dial to the channel to which you set the Transmitter
Channel Select Switch.
Channel Select Dial
(shown with channel
3 selected)
4) The LightMinder™ Home Light Control System divides the rooms and areas of your home into
four Light Groups labeled a, B, C, and D on the Transmitter keyboard. assign your rooms and areas
to Light Groups, and make a note of the assignments. We suggest that the entry area of your home
be assigned to Light Group a. This is because the Keychain Remote for your Hunter Light Control
System operates only Light Group a, and you will want to be able to turn on your entry lighting before
you enter. A sample Light Group assignment scheme might be:
Light Group a - Entry area
Light Group B - Living area
Light Group C - Dining area
Light Group D - Master Bedroom
Download from Www.Somanuals.com. All Manuals Search And Download.
43022-01
9
Setup (cont.)
NOTE - OBTAINING ADDITIONAL RECEIVERS
Each Light Group can support an unlimited number of Receivers. To purchase additional
Receivers, visit our website at www.hunterfan.com.
5) On each Receiver rotate the Light Group Select Dial to the Light Group for which it is intended.
Light Group Select
Dial (shown with Light
Group C selected)
Download from Www.Somanuals.co1m0. All Manuals Search And Download.
43022-01
Setup (cont.)
6) Plug your lamps into the Receivers (observing correct plug polarities), then plug the Receivers into
standard wall electrical outlets.
Receiver plugs into
wall outlet.
Lamp plugs in under
Receiver
7) Switch the lamps that will be controlled by the Home Light Control System to the On position.
Download from Www.Somanuals.com. All Manuals Search And Download.
43022-01
11
Setup (cont.)
8) Install two fresh AA batteries into the Battery Compartment. Ensure the battery polarities are
correctly oriented.
9) Reinstall the Battery Cover.
10) The Welcome screen will appear:
WELCOME
PRESS ANY KEY TO BEGIN
SETUP
11) Press any key. The Setup screen will appear:
SETUP
DATE / TIME
ENTER
12) To exit Setup press
Setup press
or
so the Setup screen shows Exit, then press . To proceed with
.
If you decide to exit the Setup, then the Setup Complete screen will appear:
SETUP COMPLETE
Download from Www.Somanuals.co1m2. All Manuals Search And Download.
43022-01
Setup (cont.)
After approximately five seconds the screen will show the mode on which the Program Select Switch
is set.
If you decide to proceed with Setup, then the Calendar / Clock screen will appear:
JAN 01 2007
MONDAY
12:00A
ENTER
NOTE - BUTTON OPERATION
Press or to select the Calendar and Clock positions; press
To fast scroll, press and hold the buttons; for slow scroll, press the buttons repeatedly.
or
to change settings.
13) Press
14) Press
or
or
to find the current month. Press
to find the current date. Press
to set the month.
to set the date.
NOTE - WEEK DAY SETTING
The correct week day will automatically update while entering the year, month, or day.
15) Press or to find the current year. Press to set the year.
NOTE - AM / PM SETTING
To set AM or PM, scroll through the hours until the correct setting appears.
16) Press
or
to find the current hour. Press
to set the hour.
Download from Www.Somanuals.com. All Manuals Search And Download.
43022-01
13
Setup (cont.)
17) Press
or
to find the current minute. Press
to set the minute. The Automatic Daylight
Savings Time screen will appear.
AUTO DST UPDATE? YES
ENTER
NOTE - AUTOMATIC DAYLIGHT SAVINGS TIME SETTING
If you select Yes, then the Home Light Control will update automatically for Daylight Savings
Time.
18) Press
appear:
or
to choose Yes or No. Press
to set your choice. The Final Setup screen will
SETUP
PROGRAM
ENTER
19) To proceed to the Programs, press . To revisit Setup, press
Calendar / Clock screen, and press . To exit Setup, press
or
to find the
or
to find the Exit
screen, and press
.
Download from Www.Somanuals.co1m4. All Manuals Search And Download.
43022-01
Home Program
The Home Program has three modes:
PROGRAM: HOME
7 DAY SAME
ENTER
~ 7-day Same mode - allows you to quickly and easily program the same On/Off times
for every day of the week either for all Light Groups or for individual Light Groups.
PROGRAM: HOME
WEEK / WEEKEND
ENTER
~ Week / Weekend mode - allows you to program the same On/Off times for the
weekdays, and different On/Off times for the weekend either for all Light Groups or for
individual Light Groups.
PROGRAM: HOME
CUSTOM
ENTER
~ Custom mode - allows you to program individual On/Off times for each day of the week,
either for all Light Groups or for individual Light Groups.
press
the mode you wish to program.
Download from Www.Somanuals.com. All Manuals Search And Download.
or
to scroll through the three Home program modes, and and press to select
43022-01
15
Home Program (cont.)
To program the 7-day Same mode:
PROGRAM: HOME
7 DAY SAME
ENTER
1) Press
to select the 7 Day Same mode. The Time/Group screen will appear:
ON 06:00A 05:00P
OFF 08:00A 11:00P
GROUP A
ENTER
NOTE - PROGRAMMING TIMES
You can program two different On/Off times for each Light Group. If you want your lights to
come on only once during the day, then program the same On/Off times into both time posi-
tions.
NOTE - GROUPS
The word GROUP on the screen means Light Group.
NOTE - REPROGRAMMING LIGHT GROUPS
You can reprogram Light Groups in any Program at any time by 1) placing the Program Select
Switch to the desired Program, and 2) pressing and holding for three seconds either the On or
Off button for the Light Group you wish to reprogram.
Download from Www.Somanuals.co1m6. All Manuals Search And Download.
43022-01
Home Program (cont.)
2) Press
To fast scroll, press and hold the buttons; for slow scroll, press the buttons repeatedly. When your
desired setting appears, press
or
to select the Time and Group positions. Press
or
to change the settings.
.
3) Once your desired times are programmed the screen will show:
SAME PROGRAM FOR ALL
GROUPS? YES
ENTER
4) Press
to program the other Light Groups with the same times for every day of the week. The
screen will show the Vacation Program screen (explained later). If you want to program the other
Light Groups with different times for everyday of the week, or if you want to program no other Light
Groups, then press
or
so the screen shows “NO”:
SAME PROGRAM FOR ALL
GROUPS? NO
ENTER
5) Press
. The screen will show:
PROGRAM ADDITIONAL
GROUPS? YES
ENTER
Download from Www.Somanuals.com. All Manuals Search And Download.
43022-01
17
Home Program (cont.)
6) Press
to program the other individual Light Groups with different times for every day of the
week. You will be taken back to Step 2 of the 7-Day Same option. If you do not want to program the
other Light Groups with different times, then press
or
so the screen shows “NO”:
PROGRAM ADDITIONAL
GROUPS? NO
ENTER
7) Press
8) Press
. The screen will show the Vacation Program option screen (explained on page 26):
PROGRAM VACATION NOW?
YES
ENTER
to proceed to the Vacation Program.
Download from Www.Somanuals.co1m8. All Manuals Search And Download.
43022-01
Home Program (cont.)
To program the Week / Weekend mode:
PROGRAM: HOME
WEEK / WEEKEND
ENTER
1) Press
to select the Week / Weekend option option. The Week Time/Group screen will appear:
ON 06:00A 05:00P WEEK
OFF 08:00A 11:00P
GROUP A
ENTER
2) Press
or
to select the Time and Group positions. Press
or
to change the settings.
To fast scroll, press and hold the buttons; for slow scroll, press the buttons repeatedly. When your
desired setting appears, press . The Weekend Time/Group for Saturday screen will appear:
ON 06:00A 05:00P SAT
OFF 08:00A 11:00P
GROUP A
ENTER
NOTE - REPROGRAMMING LIGHT GROUPS
You can reprogram Light Groups in any Program at any time by 1) placing the Program Select
Switch to the desired Program, and 2) pressing and holding for three seconds either the On or
Off button for the Light Group you wish to reprogram.
Download from Www.Somanuals.com. All Manuals Search And Download.
43022-01
19
Home Program (cont.)
3) Press
or
to select the Time and Group positions. Press
or
to change the settings.
To fast scroll, press and hold the buttons; for slow scroll, press the buttons repeatedly. When your
desired setting appears, press . The Weekend Time/Group for Sunday screen will appear:
ON 06:00A 05:00P SUN
OFF 08:00A 11:00P
GROUP A
ENTER
4) Press
To fast scroll, press and hold the buttons; for slow scroll, press the buttons repeatedly. When your
desired setting appears, press
or
to select the Time and Group positions. Press
or
to change the settings.
.
5) Once your desired times are programmed the screen will show:
SAME PROGRAM FOR ALL
GROUPS? YES
ENTER
6) Press
to program the other Light Groups with the same times for the week and weekend. The
screen will show the Program Vacation Mode screen (explained later). If you want to program the
other Light Groups with different times for the week and weekend, or if you want to program no other
light groups, then press
or
so the screen shows “NO”:
SAME PROGRAM FOR ALL
GROUPS? NO
ENTER
Download from Www.Somanuals.co2m0. All Manuals Search And Download.
43022-01
Home Program (cont.)
7) Press
. The screen will show:
PROGRAM ADDITIONAL
GROUPS? YES
ENTER
8) Press
to program the other individual Light Groups with different times for the week and week-
end. You will be taken back to Step 2 of the Week / Weekend option. If you do not want to program
the other Light Groups with different times, then press
or
so the screen shows “NO”:
PROGRAM ADDITIONAL
GROUPS? NO
ENTER
9) Press
. The screen will show the Vacation Program option screen (explained on page 26):
PROGRAM VACATION NOW?
YES
ENTER
10) Press
to proceed to the Vacation Program.
Download from Www.Somanuals.com. All Manuals Search And Download.
43022-01
21
Home Program (cont.)
To program the Custom mode:
PROGRAM: HOME
CUSTOM
ENTER
1) Press
to select the Custom mode. The Custom Time/Group screen will appear:
ON 06:00A 05:00P MON
OFF 08:00A 11:00P
GROUP A
ENTER
NOTE - DAYS OF THE WEEK
On the first line of the screen, the days of the week are abbreviated MON, TUE, WED, THU,
FRI, SAT, SUN. When you enter your desired settings, the screen will automatically show the
next day of the week.
NOTE - REPROGRAMMING LIGHT GROUPS
You can reprogram Light Groups in any Program at any time by 1) placing the Program Select
Switch to the desired Program, and 2) pressing and holding for three seconds either the On or
Off button for the Light Group you wish to reprogram.
2) Press
or
to select the Time and Group positions. Press
or
to change the settings.
To fast scroll, press and hold the buttons; for slow scroll, press the buttons repeatedly. When your
desired setting appears, press . The screen for the next day of the week will appear. Repeat this
procedure for the remaining days of the week.
Download from Www.Somanuals.co2m2. All Manuals Search And Download.
43022-01
Home Program (cont.)
3) Once your desired times are programmed the screen will show:
SAME PROGRAM FOR ALL
GROUPS? YES
ENTER
4) Press
to program the other Light Groups with the same times for every day of the week. The
screen will show the Program Vacation option screen (explained later). If you want to program the
other Light Groups with different times for every day of the week, or if you want to program no other
Light Groups, then press
or
so the screen shows “NO”:
SAME PROGRAM FOR ALL
GROUPS? NO
ENTER
ENTER
5) Press
. The screen will show:
PROGRAM ADDITIONAL
GROUPS? YES
Download from Www.Somanuals.com. All Manuals Search And Download.
43022-01
23
Home Program (cont.)
6) Press
to program the other individual Light Groups with different times for every day of the
week. You will be taken back to Step 2 of the Custom option. If you do not want to program the other
Light Groups with different times, then press
or
so the screen shows “NO”:
PROGRAM ADDITIONAL
GROUPS? NO
ENTER
7) Press
8) Press
. The screen will show the Vacation Program option screen (explained on page 26):
PROGRAM VACATION NOW?
YES
ENTER
to proceed to the Vacation Program.
Download from Www.Somanuals.co2m4. All Manuals Search And Download.
43022-01
Vacation Program
The Vacation Program has two modes:
PROGRAM: VACATION
HOME VARIABLE
ENTER
~ Home Variable Mode - uses your Home program settings to randomly turn on light
groups for each hour and then turn them off after thirty minutes.
PROGRAM: VACATION
SMART DETERRENCE
ENTER
~ Smart deterrence Mode - between the hours of 5:30PM and 11:30PM Smart Deter-
rence always keeps at least one Light Group on. The time each Light Groups remains on is between
one hour and one hour forty-five minutes, depending on how many Light Groups are selected for this
mode. In this way Smart Deterrence simulates someone inside your home moving from one area to
another.
press
or
to scroll through the Vacation program Modes, and and press to select the
Mode you wish to activate.
Download from Www.Somanuals.com. All Manuals Search And Download.
43022-01
25
Vacation Program (cont.)
To activate the Home Variable Mode:
PROGRAM: VACATION
HOME VARIABLE
ENTER
1) Press
to select the Home Variable Mode. The Setup Complete screen will appear:
SETUP COMPLETE
After approximately five seconds the screen will show the mode on which the Program Select Switch
is set.
To activate the Smart deterrence Mode:
PROGRAM: VACATION
SMART DETERRENCE
ENTER
1) Press
to select the Smart Deterrence Mode. The Group Select screen will appear:
SELECT GROUPS FOR
SETUP:
ENTER
Download from Www.Somanuals.co2m6. All Manuals Search And Download.
43022-01
Vacation Program (cont.)
NOTE - SMART DETERRENCE MODE LIGHT GROUPS
You must select at least two Light Groups in the Smart Deterrence Mode.
2) To include a Light Group in Smart Deterrence press that Light Group’s On button. That Light
Group will appear on the screen.
Light Groups
A
D
C
B
On Buttons
OFF
ON
Off Buttons
SELECT GROUPS FOR
SETUP: A B C D
ENTER
To remove a Light Group from Smart Deterrence press that Light Group’s Off button. That Light Group
will disappear from the screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
43022-01
27
Vacation Program (cont.)
3) Press
. The Setup Complete screen will appear:
SETUP COMPLETE
If you did not include at least two Light Groups in Smart Deterrence Mode, then the Setup Incomplete
screen will appear:
SETUP INCOMPLETE
RETURN TO SETUP?
NO
ENTER
4) Press
if you wish to exit the Vacation Program, or press
or
so the screen shows
Yes if you wish to return to the Vacation Program screen and include other Light Groups in Smart
Deterrence.
If you decide to Exit the Vacation Program, then the Setup Complete screen will appear:
SETUP COMPLETE
After approximately five seconds the screen will show the mode on which the Program Select Switch
is set.
Download from Www.Somanuals.co2m8. All Manuals Search And Download.
43022-01
Vacation Program (cont.)
If you decide to include other Light Groups in Smart Deterrence, then the Vacation program Smart
Deterrence screen will appear:
PROGRAM: VACATION
SMART DETERRENCE
ENTER
5) Press
to proceed with including other Light Groups in Smart Deterrence. Once you’ve included
all your desired Light Groups, the Setup Complete screen will appear:
SETUP COMPLETE
Download from Www.Somanuals.com. All Manuals Search And Download.
43022-01
29
Manual Operation
Manual Operation allows you disable the Home and Vacation programs and use the Transmitter as a
remote switch for your Light Groups.
To enter Manual Operation:
NOTE - MANUAL OPERATION SCREEN
Only the Light Groups that are selected will appear on the screen.
1) Set the Mode Switch to Manual. The Manual Operation screen will appear:
12:00P
MANUAL
A B C D
ENTER
2) Use the Light Groups On / Off buttons to remotely operate Light Groups. Use the All On buttons
and the all Off buttons to operate all Light Groups.
Light Groups
On / Off Buttons
all Off Button
all Off Button
ALL
OFF
OFF
A
D
B
C
ALL
ON
ALL
ON
all On Button
all On Button
ON
Download from Www.Somanuals.co3m0. All Manuals Search And Download.
43022-01
all Off Button
Keychain Remote Operation
The Keychain Remote allows you to turn on Light Group a before you enter you home.
Remove the slide-cover from the back of the Keychain Remote, install a 3-volt, type CR2032 battery,
and reinstall the slide-cover.
To operate the Keychain Remote, simply press the On and Off buttons.
NOTE - OBTAINING ADDITIONAL KEYYCHAIN REMOTES
Your LightMinder™ Home Light Control System can support an unlimited number of Keychain
Remotes. To purchase additional Keychain Remotes, visit our website at www.hunterfan.com.
Download from Www.Somanuals.com. All Manuals Search And Download.
43022-01
31
Daily Operation
Once your desired times are programmed into Home Light Control System, it will operate automati-
cally depending upon the postion of the program Select Switch.
•VACATION
•HOME
•MANUAL
program Select Switch
With the program Select Switch in the Home position, the Home Light Control System will operate
according to your Home Program settings, and the Home Mode screen will appear:
NOTE - TIME DISPLAY
The time displayed on the screen will be the actual time.
NOTE - LIGHT GROUPS ON THE SCREEN
Only the Light Groups that are selected will appear on the screen.
12:00P
HOME
A B C D
Download from Www.Somanuals.co3m2. All Manuals Search And Download.
43022-01
Daily Operation (cont.)
With the program Select Switch in the Vacation position, the Home Light Control System will operate
according to your Vacation Program settings, and the Vacation Mode screen will appear:
12:00P
VACATION
A B C D
With the program Select Switch in the Manual position, the Home Light Control System becomes a
remote control for you Light Groups, and the Vacation Mode screen will appear:
12:00P
MANUAL
A B C D
at some point you will want to change the Home Light Control System’s program settings, so you will
need to enter Setup.
To enter Setup:
1) Press
and hold for three seconds. The Setup Screen will appear:
SETUP
DATE / TIME
ENTER
Download from Www.Somanuals.com. All Manuals Search And Download.
43022-01
33
Transmitter Wall-Mount
The Home Light Control System can be conveniently mounted on a wall by using the included Wall
anchors, Screws, and Wall Mount Template.
To wall-mount the Transmitter:
1) Select your desired location.
2) Affix the Wall-Mount Template the wall at your desired height.
3) Follow the instructions on the Wall-Mount Template
Download from Www.Somanuals.co3m4. All Manuals Search And Download.
43022-01
Maintenance
Your LightMinder™ Home Light Control System requires very little maintenance. Except for occa-
sional cleaning and battery replacement, the system is otherwise trouble-free.
Cleaning
NOTE - DO NOT IMMERSE THE TRANSMITTER, RECEIVERS, OR KEYCHAIN REMOTE IN WATER.
Use a soft damp cloth to gently wipe off the Transmitter, Receivers, and Keychain Remotes
Batteries
When the System’s batteries are becoming depleted, the screen will show the Low Battery Indicator:
12:00P
MANUAL
A B C D
Low Battery Indicator
When the Low Battery Indicator appears it is best to change the batteries at your earliest conve-
nience. Install two fresh aa Batteries.
The Keychain Remote battery should last for about a year depending on use. If your Keychain Re-
mote begins operate only intermittently, install a fresh CR2032 3-volt battery.
Download from Www.Somanuals.com. All Manuals Search And Download.
43022-01
35
Technical Support
If you have any additional questions or problems with your LightMinder™ Home
Light Control System, please call 1-888-830-1326 from 7:00AM to 7:00PM Central
Time Monday thru Friday and 8:00AM to 5PM Central Time on Saturday, or contact
HUNTER FAN COMPANY
2500 FRISCO AVENUE
MEMPHIS, TN 38114, USA
Download from Www.Somanuals.co3m6. All Manuals Search And Download.
43022-01
|