Hunter Plug-InTM Bowl Style Light Fixture
Installation Instructions
41764-01 04/04/2005
41764-01_Rev 4-4-05.indd
1
4/4/05, 2:27:38 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Disconnect power to the ceiling fan by turning off the circuit breakers
both to the outlet box and to its associated wall switch location.
2. Unscrew the finial to remove the finial and switch housing cap.
Note: Save the finial and switch housing cap should you choose to re-
move the light fixture in the future.
3. Plug-in the light fixture and turn the gear wheel to the right (clockwise) to
secure the light fixture. WARNING: Improper installation could cause the
light fixture to fall.
4. Install 2 - 60 W Max A-15 bulbs.
5. Attach the 8” extension chain to the fan pull chain. Attach the 4” exten-
sion chain to the light pull chain.
6. Snap the adapter into the hole in the glass bowl.
7. read the light pull chain through the center hole in the adapter, cap
and finial. read the fan pull chain through the side hole in the adapter
and cap.
8. Place the glass bowl and cap over the threaded rod.
9. Screw the finial onto the end of threaded rod to secure the glass bowl.
Note: If the glass bowl is crooked, you can loosen the finial and adjust the
glass bowl until it is level. Once level, securely tighten the finial.
10. Restore power to the ceiling fan.
Switch Housing
Cap
Finial
Step 2
Fan Pull
Chain
readed Rod
Light Pull
Adapter
Chain
Gear
Wheel
Glass Bowl
Cap
Light
Fixture
Steps 5-9
Step 3
Finial
41764-01_Rev 4-4-05.indd
3
4/4/05, 2:27:41 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Hunter Fan Company
2500 Frisco Avenue
Memphis, Tennessee 38114
is Light Fixture weighs 3.0 lbs.
© 2005 Hunter Fan Company
Printed in China & Taiwan
41764-01_Rev 4-4-05.indd
4
4/4/05, 2:27:44 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
|